Scribd
Upload
115 views1,710 pages

DAR 2021 Vol 2 Compressed

This document provides cost estimates for cement plastering work in three sections. Section 13.1 provides estimates for 12mm cement plastering in 1:4 and 1:6 mixes. Section 13.2 gives estimates for 15mm cement plastering on rough brick walls in 1:4 and 1:6 mixes. Section 13.3 begins estimates for 20mm cement plastering, listing the 1:4 mix material cost. The document includes estimates for materials, labor, taxes/fees, and total costs per square meter and square foot for completing the plastering work in 10 square meters for each itemized section.

Uploaded by

er.ankitnegi1988
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
115 views1,710 pages

DAR 2021 Vol 2 Compressed

This document provides cost estimates for cement plastering work in three sections. Section 13.1 provides estimates for 12mm cement plastering in 1:4 and 1:6 mixes. Section 13.2 gives estimates for 15mm cement plastering on rough brick walls in 1:4 and 1:6 mixes. Section 13.3 begins estimates for 20mm cement plastering, listing the 1:4 mix material cost. The document includes estimates for materials, labor, taxes/fees, and total costs per square meter and square foot for completing the plastering work in 10 square meters for each itemized section.

Uploaded by

er.ankitnegi1988
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1710

13.

1 12 mm cement plaster of mix :


13.1.1 1:4 (1 cement: 4 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.144 3713.20 534.70
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2203.89
Add 1 % Water charges on "W" 22.04
TOTAL 2225.93
Add GST on "X" (multiplying factor 0.1405) 312.74
TOTAL 2538.68
Add 15% CPOH on "Y" 380.80
TOTAL 2919.48
Add Cess @ 1% on "Z" 29.19
Cost of 10.00 sqm 2948.67
Cost of 1.00 sqm 294.87
Say 294.85

13.1.2 1:6 (1 cement: 6 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.144 3044.30 438.38
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2107.57
Add 1 % Water charges on "W" 21.08
TOTAL 2128.65
Add GST on "X" (multiplying factor 0.1405) 299.08
TOTAL 2427.72
Add 15% CPOH on "Y" 364.16
TOTAL 2791.88
Add Cess @ 1% on "Z" 27.92
Cost of 10.00 sqm 2819.80
Cost of 1.00 sqm 281.98
Say 282.00
13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1 1:4 (1 cement: 4 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.172 3713.20 638.67
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2539.06

Add 1 % Water charges on "W" 25.39


TOTAL 2564.45
Add GST on "X" (multiplying factor 0.1405) 360.31
TOTAL 2924.76
Add 15% CPOH on "Y" 438.71
TOTAL 3363.47
Add Cess @ 1% on "Z" 33.63
Cost of 10.00 sqm 3397.11
Cost of 1.00 sqm 339.71
Say 339.70

13.2.2 1:6 (1 cement: 6 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.172 3044.30 523.62
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2424.01
Add 1 % Water charges on "W" 24.24
TOTAL 2448.25
Add GST on "X" (multiplying factor 0.1405) 343.98
TOTAL 2792.23
Add 15% CPOH on "Y" 418.83
TOTAL 3211.07
Add Cess @ 1% on "Z" 32.11
Cost of 10.00 sqm 3243.18
Cost of 1.00 sqm 324.32
Say 324.30

13.3 20 mm cement plaster of mix :


13.3.1 1:4 (1 cement: 4 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.224 3713.20 831.76
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 3005.85
Add 1 % Water charges on "W" 30.06
TOTAL 3035.91
Add GST on "X" (multiplying factor 0.1405) 426.55
TOTAL 3462.45
Add 15% CPOH on "Y" 519.37
TOTAL 3981.82
Add Cess @ 1% on "Z" 39.82
Cost of 10.00 sqm 4021.64
Cost of 1.00 sqm 402.16
Say 402.15
13.3.2 1:6 (1 cement: 6 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.224 3044.30 681.92
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2856.02
Add 1 % Water charges on "W" 28.56
TOTAL 2884.58
Add GST on "X" (multiplying factor 0.1405) 405.28
TOTAL 3289.86
Add 15% CPOH on "Y" 493.48
TOTAL 3783.34
Add Cess @ 1% on "Z" 37.83
Cost of 10.00 sqm 3821.17
Cost of 1.00 sqm 382.12
Say 382.10

13.4 12 mm cement plaster of mix :


13.4.1 1:4 (1 cement: 4 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.144 4355.20 627.15
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2296.34
Add 1 % Water charges on "W" 22.96
TOTAL 2319.31
Add GST on "X" (multiplying factor 0.1405) 325.86
TOTAL 2645.17
Add 15% CPOH on "Y" 396.78
TOTAL 3041.94
Add Cess @ 1% on "Z" 30.42
Cost of 10.00 sqm 3072.36
Cost of 1.00 sqm 307.24
Say 307.25
13.4.2 1:6 (1 cement: 6 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
3.11 Rate as per Item Number 3.11 of SH: Mortars cum 0.144 3686.30 530.83
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2200.02
Add 1 % Water charges on "W" 22.00
TOTAL 2222.02
Add GST on "X" (multiplying factor 0.1405) 312.19
TOTAL 2534.21
Add 15% CPOH on "Y" 380.13
TOTAL 2914.35
Add Cess @ 1% on "Z" 29.14
Cost of 10.00 sqm 2943.49
Cost of 1.00 sqm 294.35
Say 294.35

13.5 15 mm cement plaster on rough side of single or half brick wall of mix:
13.5.1 1:4 (1 cement: 4 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.172 4355.20 749.09
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2649.49
Add 1 % Water charges on "W" 26.49
TOTAL 2675.98
Add GST on "X" (multiplying factor 0.1405) 375.98
TOTAL 3051.96
Add 15% CPOH on "Y" 457.79
TOTAL 3509.75
Add Cess @ 1% on "Z" 35.10
Cost of 10.00 sqm 3544.85
Cost of 1.00 sqm 354.48
Say 354.50
13.5.2 1:6 (1 cement: 6 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
3.11 Rate as per Item Number 3.11 of SH: Mortars cum 0.172 3686.30 634.04
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2534.44
Add 1 % Water charges on "W" 25.34
TOTAL 2559.78
Add GST on "X" (multiplying factor 0.1405) 359.65
TOTAL 2919.43
Add 15% CPOH on "Y" 437.91
TOTAL 3357.34
Add Cess @ 1% on "Z" 33.57
Cost of 10.00 sqm 3390.92
Cost of 1.00 sqm 339.09
Say 339.10

13.6 20 mm cement plaster of mix :


13.6.1 1:4 (1 cement: 4 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.224 4355.20 975.56
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 3149.66
Add 1 % Water charges on "W" 31.50
TOTAL 3181.15
Add GST on "X" (multiplying factor 0.1405) 446.95
TOTAL 3628.11
Add 15% CPOH on "Y" 544.22
TOTAL 4172.32
Add Cess @ 1% on "Z" 41.72
Cost of 10.00 sqm 4214.05
Cost of 1.00 sqm 421.40
Say 421.40
13.6.2 1:6 (1 cement: 6 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
3.11 Rate as per Item Number 3.11 of SH: Mortars cum 0.224 3686.30 825.73
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2999.82
Add 1 % Water charges on "W" 30.00
TOTAL 3029.82
Add GST on "X" (multiplying factor 0.1405) 425.69
TOTAL 3455.51
Add 15% CPOH on "Y" 518.33
TOTAL 3973.84
Add Cess @ 1% on "Z" 39.74
Cost of 10.00 sqm 4013.58
Cost of 1.00 sqm 401.36
Say 401.35

13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
13.7.1 1:3 (1 cement: 3 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per Item Number 3.3 of SH: Mortars cum 0.144 4382.15 631.03
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 2796.60
Add 1 % Water charges on "W" 27.97
TOTAL 2824.57
Add GST on "X" (multiplying factor 0.1405) 396.85
TOTAL 3221.42
Add 15% CPOH on "Y" 483.21
TOTAL 3704.64
Add Cess @ 1% on "Z" 37.05
Cost of 10.00 sqm 3741.68
Cost of 1.00 sqm 374.17
Say 374.15
13.7.2 1:4 (1 cement: 4 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.144 3713.20 534.70
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 2700.28
Add 1 % Water charges on "W" 27.00
TOTAL 2727.28
Add GST on "X" (multiplying factor 0.1405) 383.18
TOTAL 3110.46
Add 15% CPOH on "Y" 466.57
TOTAL 3577.03
Add Cess @ 1% on "Z" 35.77
Cost of 10.00 sqm 3612.80
Cost of 1.00 sqm 361.28
Say 361.30

13.8 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
13.8.1 1:3 (1 cement: 3 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per Item Number 3.3 of SH: Mortars cum 0.172 4382.15 753.73
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 3150.50
Add 1 % Water charges on "W" 31.51
TOTAL 3182.01
Add GST on "X" (multiplying factor 0.1405) 447.07
TOTAL 3629.08
Add 15% CPOH on "Y" 544.36
TOTAL 4173.44
Add Cess @ 1% on "Z" 41.73
Cost of 10.00 sqm 4215.18
Cost of 1.00 sqm 421.52
Say 421.50
13.8.2 1:4 (1 cement: 4 fine sand)
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.172 3713.20 638.67
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 3035.45
Add 1 % Water charges on "W" 30.35
TOTAL 3065.80
Add GST on "X" (multiplying factor 0.1405) 430.74
TOTAL 3496.54
Add 15% CPOH on "Y" 524.48
TOTAL 4021.03
Add Cess @ 1% on "Z" 40.21
Cost of 10.00 sqm 4061.24
Cost of 1.00 sqm 406.12
Say 406.10
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
13.9.1 12 mm cement plaster

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:3 (1 cement : 3 coarse sand)
3.8 Rate as per Item Number 3.8 of SH: Mortars cum 0.144 5024.15 723.48
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 2889.05
Add 1 % Water charges on "W" 28.89
TOTAL 2917.94
Add GST on "X" (multiplying factor 0.1405) 409.97
TOTAL 3327.91
Add 15% CPOH on "Y" 499.19
TOTAL 3827.10
Add Cess @ 1% on "Z" 38.27
Cost of 10.00 sqm 3865.37
Cost of 1.00 sqm 386.54
Say 386.55
13.9.2 20 mm cement plaster

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:3 (1 cement : 3 coarse sand)
3.8 Rate as per Item Number 3.8 of SH: Mortars cum 0.224 5024.15 1125.41
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 3795.88
Add 1 % Water charges on "W" 37.96
TOTAL 3833.84
Add GST on "X" (multiplying factor 0.1405) 538.65
TOTAL 4372.50
Add 15% CPOH on "Y" 655.87
TOTAL 5028.37
Add Cess @ 1% on "Z" 50.28
Cost of 10.00 sqm 5078.66
Cost of 1.00 sqm 507.87
Say 507.85

13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or
wall.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:3 (1 cement : 3 coarse sand)
3.8 Rate as per Item Number 3.8 of SH: Mortars cum 0.172 5024.15 864.15
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0155 Mason (average) day 0.27 749.00 202.23
0115 Coolie day 0.27 645.00 174.15
9999 Scaffolding and sundries L.S. 8.06 2.12 17.09
TOTAL 3260.93
Add 1 % Water charges on "W" 32.61
TOTAL 3293.54
Add GST on "X" (multiplying factor 0.1405) 462.74
TOTAL 3756.28
Add 15% CPOH on "Y" 563.44
TOTAL 4319.72
Add Cess @ 1% on "Z" 43.20
Cost of 10.00 sqm 4362.92
Cost of 1.00 sqm 436.29
Say 436.30
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5
coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse
sand)
3.10 Rate as per Item Number 3.10 of SH: Mortars cum 0.144 3995.00 575.28
Top layer Cement mortar 1 : 6 (1 cement : 6 fine
sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.072 3044.30 219.19
LABOUR
0155 Mason (average) day 1.21 749.00 906.29
0115 Coolie day 1.29 645.00 832.05
0101 Bhisti day 1.05 714.00 749.70
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 3309.24
Add 1 % Water charges on "W" 33.09
TOTAL 3342.34
Add GST on "X" (multiplying factor 0.1405) 469.60
TOTAL 3811.93
Add 15% CPOH on "Y" 571.79
TOTAL 4383.72
Add Cess @ 1% on "Z" 43.84
Cost of 10.00 sqm 4427.56
Cost of 1.00 sqm 442.76
Say 442.75
13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm
cement plaster 1:3 (1 cement : 3 coarse sand) finished
rough with sponge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse
sand)
3.10 Rate as per Item Number 3.10 of SH: Mortars cum 0.144 3995.00 575.28
Top layer Cement mortar 1:3 (1 cement : 3 coarse
sand)
3.8 Rate as per Item Number 3.8 of SH: Mortars cum 0.072 5024.15 361.74
LABOUR
0155 Mason (average) day 1.21 749.00 906.29
0115 Coolie day 1.29 645.00 832.05
0101 Bhisti day 1.05 714.00 749.70
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 3451.79
Add 1 % Water charges on "W" 34.52
TOTAL 3486.31
Add GST on "X" (multiplying factor 0.1405) 489.83
TOTAL 3976.14
Add 15% CPOH on "Y" 596.42
TOTAL 4572.56
Add Cess @ 1% on "Z" 45.73
Cost of 10.00 sqm 4618.28
Cost of 1.00 sqm 461.83
Say 461.85
13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
3.12 Rate as per Item Number 3.12 of SH: Mortars cum 0.144 5319.25 765.97
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2435.17
Add 1 % Water charges on "W" 24.35
TOTAL 2459.52
Add GST on "X" (multiplying factor 0.1405) 345.56
TOTAL 2805.08
Add 15% CPOH on "Y" 420.76
TOTAL 3225.84
Add Cess @ 1% on "Z" 32.26
Cost of 10.00 sqm 3258.10
Cost of 1.00 sqm 325.81
Say 325.80

13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
3.12 Rate as per Item Number 3.12 of SH: Mortars cum 0.172 5319.25 914.91
LABOUR
0155 Mason (average) day 0.80 749.00 599.20
0115 Coolie day 0.88 645.00 567.60
0101 Bhisti day 0.99 714.00 706.86
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 2815.30
Add 1 % Water charges on "W" 28.15
TOTAL 2843.46
Add GST on "X" (multiplying factor 0.1405) 399.51
TOTAL 3242.96
Add 15% CPOH on "Y" 486.44
TOTAL 3729.41
Add Cess @ 1% on "Z" 37.29
Cost of 10.00 sqm 3766.70
Cost of 1.00 sqm 376.67
Say 376.65
13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
3.12 Rate as per Item Number 3.12 of SH: Mortars cum 0.224 5319.25 1191.51
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scaffolding and sundries L.S. 12.61 2.12 26.73
TOTAL 3365.61
Add 1 % Water charges on "W" 33.66
TOTAL 3399.26
Add GST on "X" (multiplying factor 0.1405) 477.60
TOTAL 3876.86
Add 15% CPOH on "Y" 581.53
TOTAL 4458.39
Add Cess @ 1% on "Z" 44.58
Cost of 10.00 sqm 4502.97
Cost of 1.00 sqm 450.30
Say 450.30

13.16 6 mm cement plaster of mix :


13.16.1 1:3 (1 cement : 3 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per Item Number 3.3 of SH: Mortars cum 0.072 4382.15 315.51
LABOUR
0155 Mason (average) day 0.51 749.00 381.99
0115 Coolie day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Extra for removing burrs, cleaning with wire brushes,
pock making with pointed tool etc. complete.
L.S. 13.39 2.12 28.39
9999 Scaffolding and sundries L.S. 11.70 2.12 24.80
TOTAL 1891.33
Add 1 % Water charges on "W" 18.91
TOTAL 1910.24
Add GST on "X" (multiplying factor 0.1405) 268.39
TOTAL 2178.63
Add 15% CPOH on "Y" 326.79
TOTAL 2505.42
Add Cess @ 1% on "Z" 25.05
Cost of 10.00 sqm 2530.48
Cost of 1.00 sqm 253.05
Say 253.05
13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on to
when dry for bearing of R.C.C. slabs and beams.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item
Number 3.3 of SH: Mortars LABOUR
3.3 Mason (average) 0.072 4382.15 315.51
Coolie cum
0155 0.51 749.00 381.99
day day
0115 0.75 645.00 483.75

0101 Bhisti day 0.92 714.00 656.88


9999 Extra for removing burrs, cleaning with wire brushes, pock L.S. 13.39 2.12 28.39
9999 making with pointed tool etc. complete. L.S. 11.7 2.12 24.80
0367 Scaffolding and sundries Portland Cement (OPC-43 grade) tonne tonne day 0.02 5000.00 100.00
2209 Carriage of Cement day L.S. 0.02 145.72 2.91
0155 Mason (average) Coolie quintal L.S. 0.27 749.00 202.23
0115 Scaffolding and sundries Satna lime L.S. 0.27 645.00 174.15
9999 Indigo gum etc Sundries ladder etc. White Washer Coolie day day L.S. 8.06 2.12 17.09
0776 Sundries TOTAL 0.01 370.00 3.70
9999 Add 1 % Water charges on "W" TOTAL 2.08 2.12 4.41
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.52 2.12 1.10
0141 Add 15% CPOH on "Y" TOTAL 0.07 714.00 49.98
0115 Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 0.07 645.00 45.15
9999 Say 2.73 2.12 5.79
2497.84
24.98
2522.82
354.46
2877.27
431.59
3308.86
33.09
3341.95
334.19
334.20

13.18 Neat cement punning.

Code Description Unit Quantity Rate Rs. Amount Rs.


0367 Detail of cost for 10 sqm LABOUR tonne tonne day 0.022 5000.00 110.00
2209 Portland Cement (OPC-43 grade) Carriage of Cement day L.S. 0.022 145.72 3.21
0155 Mason (average) Coolie 0.27 749.00 202.23
0115 Scaffolding and sundries TOTAL 0.27 645.00 174.15
9999 Add 1 % Water charges on "W" TOTAL 8.06 2.12 17.09
Add GST on "X" (multiplying factor 0.1405) TOTAL 506.67
Add 15% CPOH on "Y" TOTAL 5.07
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 511.74
Say 71.90
583.64
87.55
671.19
6.71
677.90
67.79
67.80

13.19 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 m
size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top lay
cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
13.19.1 Ordinary cement finish using ordinary cement

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm MATERIAL
Under layer 12 mm thick cement plaster Cement mortar 1 : 4 (1
cement : 4 coarse sand) Rate as per Item Number 3.9 of SH:
Mortars LABOUR
3.9 Mason (average) 0.144 4355.20 627.15
cum
0155 Beldar 0.67 749.00 501.83
day day
0114 0.75 645.00 483.75
0101 Bhisti day L.S. 0.92 714.00 656.88
9999 Scaffolding and sundries cum day day 9.88 2.12 20.95
3.3 Top layer 10 mm thick cement plaster Cement mortar 1 : 3 (1 day L.S. 0.12 4382.15 525.86
0155 cement : 3 fine sand) Rate as per Item Number 3.3 of SH: cum day quintal 0.61 749.00 456.89
0114 Mortars Mason (average) L.S. 0.69 645.00 445.05
0101 Beldar Bhisti day day day 0.85 714.00 606.90
9999 Scaffolding and sundries L.S. 9.88 2.12 20.95
1179 Crushed stone 2.36 mm to 12.5 mm size Bhisti day day 0.10 900.00 90.00
0101 Dry hydrated lime (factory made) Carriage of lime 0.01 714.00 7.14
0777 Mason (average) Beldar 0.09 290.00 26.10
9977 Bhisti 3.64 2.12 7.72
0155 Scaffolding and sundries Labour for scooping 0.50 749.00 374.50
0114 Mason (brick layer) 1st class Beldar 0.50 645.00 322.50
0101 TOTAL 0.10 714.00 71.40
9999 Add 1 % Water charges on "W" TOTAL 9.88 2.12 20.95
0123 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.25 784.00 196.00
0114 Add 15% CPOH on "Y" TOTAL 0.25 645.00 161.25
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 5623.75
Say 56.24
5679.99
798.04
6478.03
971.70
7449.73
74.50
7524.23
752.42
752.40

13.20 Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm
size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 1
cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded
hydrated lime by volume of cement.

Code Description Unit Quantity Rate Rs. Amount Rs.


3.9 Detail of cost for 10 sqm MATERIAL cum 0.144 4355.20 627.15
0155 Under layer 12 mm thick cement plaster Cement mortar 1 : 4 (1 day day day 0.67 749.00 501.83
0114 cement : 4 coarse sand) Rate as per Item Number 3.9 of SH: L.S. 0.75 645.00 483.75
0101 Mortars LABOUR cum day day 0.92 714.00 656.88
9999 Mason (average) Beldar day L.S. 9.88 2.12 20.95
3.3 Bhisti cum day quintal 0.12 4382.15 525.86
0155 Scaffolding and sundries L.S. 0.61 749.00 456.89
0114 Top layer 10 mm thick cement plaster Cement mortar 1 : 3 (1 day day day 0.69 645.00 445.05
0101 cement : 3 fine sand) Rate as per Item Number 3.3 of SH: L.S. 0.85 714.00 606.90
9999 Mortars Mason (average) L.S. 9.88 2.12 20.95
1179 Beldar Bhisti 0.10 900.00 90.00
0101 Scaffolding and sundries 0.01 714.00 7.14
0777 Crushed stone 2.36 mm to 12.5 mm size Bhisti 0.09 290.00 26.10
9977 Dry hydrated lime (factory made) Carriage of lime 3.64 2.12 7.72
0155 Mason (average) Beldar 0.50 749.00 374.50
0114 Bhisti 0.50 645.00 322.50
0101 Scaffolding and sundries Scaffolding and sundries TOTAL 0.10 714.00 71.40
9999 9.88 2.12 20.95
9999 4.42 2.12 9.37
5275.87

Add 1 % Water charges on "W" TOTAL 52.76


Add GST on "X" (multiplying factor 0.1405) TOTAL 5328.63
Add 15% CPOH on "Y" TOTAL 748.67
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 6077.30
Say 911.60
6988.90
69.89
7058.79
705.88
705.90

13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacture

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 12mm cement plaster 1:3
(1 cement :3 sand) = 10 sqm or 1.48 bags of cement used in
the mix.
Cement required for 10 sqm = 73.89kg.
Water proofing material required @ 1 kg per 50 kg of cement =
1.48 kg.
Water proofing materials Sundries 51.80
TOTAL 15.16
Add 1 % Water charges on "W" TOTAL 66.96
Add GST on "X" (multiplying factor 0.1405) TOTAL 0.67
Add 15% CPOH on "Y" TOTAL 67.63
Add Cess @ 1% on "Z" 9.50
1213 1.48 35.00
Cost of 1.48 bags of cement used in the mix. Cost of 1.00 bag kilogram L.S. 77.13
9999 7.15 2.12
of 50 kg cement used in the mix. Say 11.57
88.70
0.89
89.59
60.53
60.55

13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Detail of cost for 10 sqm Scaffolding and sundries LABOUR L.S. 53.82 2.12 114.10
0155 Mason (average) Coolie day day day 0.20 749.00 149.80
0115 Bhisti Sundries TOTAL L.S. 0.30 645.00 193.50
0101 Add 1 % Water charges on "W" TOTAL 0.10 714.00 71.40
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 7.15 2.12 15.16
Add 15% CPOH on "Y" TOTAL 543.96
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 5.44
Say 549.40
77.19
626.59
93.99
720.57
7.21
727.78
72.78
72.80

13.23 Extra for plastering on circular work not exceeding 6 m in radius:


13.23.1 In one coat
Code Description Unit Quantity Rate Rs. Amount Rs.
0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.20 749.00 149.80
0114 Mason (average) Beldar 0.20 645.00 129.00
9999 Sundries TOTAL 7.15 2.12 15.16
Add 1 % Water charges on "W" TOTAL 293.96
Add GST on "X" (multiplying factor 0.1405) TOTAL 2.94
Add 15% CPOH on "Y" TOTAL 296.90
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 41.71
Say 338.61
50.79
389.40
3.89
393.30
39.33
39.35
13.23.2 In two coats

Code Description Unit Quantity Rate Rs. Amount Rs.


0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.30 749.00 224.70
0114 Mason (average) Beldar 0.30 645.00 193.50
9999 Sundries TOTAL 13.39 2.12 28.39
Add 1 % Water charges on "W" TOTAL 446.59
Add GST on "X" (multiplying factor 0.1405) TOTAL 4.47
Add 15% CPOH on "Y" TOTAL 451.05
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 63.37
Say 514.43
77.16
591.59
5.92
597.51
59.75
59.75

13.24 Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:

13.24.1 In one coat


Code Description Unit Quantity Rate Rs. Amount Rs.
0155 Detail of cost for 10 sqm LABOUR day day day day 3.00 749.00 2247.00
0114 Mason (average) Beldar L.S. 2.00 645.00 1290.00
0115 Coolie Bhisti Sundries TOTAL 1.00 645.00 645.00
0101 Add 1 % Water charges on "W" TOTAL 0.25 714.00 178.50
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 13.39 2.12 28.39
Add 15% CPOH on "Y" TOTAL 4388.89
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 43.89
Say 4432.78
622.80
5055.58
758.34
5813.92
58.14
5872.06
587.21
587.20

13.24.2 In two coats


Code Description Unit Quantity Rate Rs. Amount Rs.
0155 Detail of cost for 10 sqm LABOUR day day day day 5.00 749.00 3745.00
0114 Mason (average) Beldar L.S. 3.00 645.00 1935.00
0115 Coolie Bhisti Sundries TOTAL 2.00 645.00 1290.00
0101 Add 1 % Water charges on "W" TOTAL 0.33 714.00 235.62
9999 Add GST on "X" (multiplying factor 0.1405) 13.39 2.12 28.39
TOTAL 7234.01
Add 15% CPOH on "Y" TOTAL 72.34
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 7306.35
Say 1026.54
8332.89
1249.93
9582.82
95.83
9678.65
967.87
967.85
95.83
9678.65
967.87
967.85

13.25 Extra for plastering:


13.25.1 Spherical ceiling

Code Description Unit Quantity Rate Rs. Amount Rs.


0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.75 749.00 561.75
0114 Mason (average) Beldar 0.74 645.00 477.30
9999 Sundries TOTAL 26.91 2.12 57.05
Add 1 % Water charges on "W" TOTAL 1096.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 10.96
Add 15% CPOH on "Y" TOTAL 1107.06
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 155.54
Say 1262.60
189.39
1451.99
14.52
1466.51
146.65
146.65

13.25.2 Groined ceiling

Code Description Unit Quantity Rate Rs. Amount Rs.


0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.80 749.00 599.20
0114 Mason (average) Beldar 0.80 645.00 516.00
9999 Sundries TOTAL 34.06 2.12 72.21
Add 1 % Water charges on "W" TOTAL 1187.41
Add GST on "X" (multiplying factor 0.1405) TOTAL 11.87
Add 15% CPOH on "Y" TOTAL 1199.28
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 168.50
Say 1367.78
205.17
1572.95
15.73
1588.68
158.87
158.85

13.25.3 Flewing soffits


Code Description Unit Quantity Rate Rs. Amount Rs.
0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.50 749.00 374.50
0114 Mason (average) Beldar 0.50 645.00 322.50
9999 Sundries TOTAL 13.39 2.12 28.39
Add 1 % Water charges on "W" TOTAL 725.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 7.25
Add 15% CPOH on "Y" TOTAL 732.64
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 102.94
Say 835.58
125.34
960.91
9.61
970.52
97.05
97.05
960.91
9.61
970.52
97.05
97.05

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smoot

Code Description Unit Quantity Rate Rs. Amount Rs.


0869 Detail of cost for 10 sqm MATERIAL kilogram L.S. 23.00 5.00 115.00
9977 Plaster of paris 10x0.002x1121 = 22.42kg Add 2% wastage= day day L.S. 3.90 2.12 8.27
0122 0.45kg 0.91 784.00 713.44
0114 Total = 22.87kg. Say23kg Plaster of Paris 0.91 645.00 586.95
9999 Carriage of plaster of paris LABOUR 83.98 2.12 178.04
Mason (for plaster of paris work) 1st class Beldar 1601.70
Scaffolding and sundries TOTAL 16.02
Add 1 % Water charges on "W" TOTAL 1617.71
Add GST on "X" (multiplying factor 0.1405) TOTAL 227.29
Add 15% CPOH on "Y" TOTAL 1845.00
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 276.75
Say 2121.75
21.22
2142.97
214.30
214.30

13.27 Extra for lining out plaster to imitate stone or concrete blocks walling.

Code Description Unit Quantity Rate Rs. Amount Rs.


0155 Detail of cost for 10 sqm LABOUR day day L.S. 0.50 749.00 374.50
0114 Mason (average) Beldar 0.50 645.00 322.50
9999 Solution of lime putty TOTAL 1.82 2.12 3.86
Add 1 % Water charges on "W" TOTAL 700.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 7.01
Add 15% CPOH on "Y" TOTAL 707.87
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 99.46
Say 807.32
121.10
928.42
9.28
937.70
93.77
93.75

13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand):
13.28.1 Flush Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.014 3713.20 51.98
0155 MATERIAL day day day 0.27 749.00 202.23
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.27 645.00 174.15
0101 Number 3.4 of SH: Mortars LABOUR 0.05 714.00 35.70
9999 Mason (average) Coolie 1.43 2.12 3.03
Bhisti Sundries TOTAL 467.10
Add 1 % Water charges on "W" TOTAL 4.67
Add GST on "X" (multiplying factor 0.1405) TOTAL 471.77
Add 15% CPOH on "Y" TOTAL 66.28
Add Cess @ 1% on "Z" 538.05
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 80.71
metre long and 1 cm wide band Say 618.76
6.19
624.95
6.25
6.25

13.28.2 Sunk Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.014 3713.20 51.98
0155 MATERIAL day day day 0.30 749.00 224.70
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.30 645.00 193.50
0101 Number 3.4 of SH: Mortars LABOUR 0.05 714.00 35.70
9999 Mason (average) Coolie 2.08 2.12 4.41
Bhisti Sundries TOTAL 510.29
Add 1 % Water charges on "W" TOTAL 5.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 515.40
Add 15% CPOH on "Y" TOTAL 72.41
Add Cess @ 1% on "Z" 587.81
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 88.17
metre long and 1 cm wide band Say 675.98
6.76
682.74
6.83
6.85

13.28.3 Raised Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.014 3713.20 51.98
0155 MATERIAL day day day 0.35 749.00 262.15
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.35 645.00 225.75
0101 Number 3.4 of SH: Mortars LABOUR 0.05 714.00 35.70
9999 Mason (average) Coolie 2.73 2.12 5.79
Bhisti Sundries TOTAL 581.37
Add 1 % Water charges on "W" TOTAL 5.81
Add GST on "X" (multiplying factor 0.1405) TOTAL 587.19
Add 15% CPOH on "Y" TOTAL 82.50
Add Cess @ 1% on "Z" 669.69
Cost of 10.00 metre long and 10 cm wide band 100.45
Cost of 1.00 metre long and 1 cm wide band Say 770.14
7.70
777.84
7.78
7.80

13.28.4 Moulded Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.014 3713.20 51.98
0155 MATERIAL day day day 0.65 749.00 486.85
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.65 645.00 419.25
0101 Number 3.4 of SH: Mortars LABOUR 0.05 714.00 35.70
9999 Mason (average) Coolie 1.56 2.12 3.31
Bhisti Sundries TOTAL 997.09
Add 1 % Water charges on "W" TOTAL 9.97
Add GST on "X" (multiplying factor 0.1405) TOTAL 1007.06
Add 15% CPOH on "Y" TOTAL 141.49
Add Cess @ 1% on "Z" 1148.56
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 172.28
metre long and 1 cm wide band Say 1320.84
13.21
1334.05
13.34
13.35

13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand):
13.29.1 Flush Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.02 3713.20 74.26
0155 MATERIAL day day day 0.32 749.00 239.68
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.32 645.00 206.40
0101 Number 3.4 of SH: Mortars LABOUR 0.06 714.00 42.84
9999 Mason (average) Coolie 2.08 2.12 4.41
Bhisti Sundries TOTAL 567.59
Add 1 % Water charges on "W" TOTAL 5.68
Add GST on "X" (multiplying factor 0.1405) TOTAL 573.27
Add 15% CPOH on "Y" TOTAL 80.54
Add Cess @ 1% on "Z" 653.81
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 98.07
metre long and 1 cm wide band Say 751.89
7.52
759.40
7.59
7.60

13.29.2 Sunk Band

Code Description Unit Quantity Rate Rs. Amount Rs.


3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.02 3713.20 74.26
0155 MATERIAL day day day 0.36 749.00 269.64
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.36 645.00 232.20
0101 Number 3.4 of SH: Mortars LABOUR 0.06 714.00 42.84
9999 Mason (average) Coolie 2.73 2.12 5.79
Bhisti Sundries TOTAL 624.73
Add 1 % Water charges on "W" TOTAL 6.25
Add GST on "X" (multiplying factor 0.1405) TOTAL 630.98
Add 15% CPOH on "Y" TOTAL 88.65
Add Cess @ 1% on "Z" 719.63
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 107.94
metre long and 1 cm wide band Say 827.58
8.28
835.85
8.36
8.35

13.29.3 Raised Band


Code Description Unit Quantity Rate Rs. Amount Rs.
3.4 Detail of cost for 10 metre long and 10 cm wide band cum 0.02 3713.20 74.26
0155 MATERIAL day day day 0.42 749.00 314.58
0115 Cement mortar 1 : 4 (1 cement : 4 fine sand) Rate as per Item L.S. 0.42 645.00 270.90
0101 Number 3.4 of SH: Mortars LABOUR 0.06 714.00 42.84
9999 Mason (average) Coolie 4.42 2.12 9.37
Bhisti Sundries TOTAL 711.95
Add 1 % Water charges on "W" TOTAL 7.12
Add GST on "X" (multiplying factor 0.1405) TOTAL 719.07
Add 15% CPOH on "Y" TOTAL 101.03
Add Cess @ 1% on "Z" 820.10
Cost of 10.00 metre long and 10 cmwide band Cost of 1.00 123.02
metre long and 1 cm wide band Say 943.12
9.43
952.55
9.53
9.55

13.29.4 Moulded Band


Code Description Unit Quantity Rate Rs. Amount Rs.
3.40 Detail of cost for 10 metre long and 10 cm wide band cum 0.024 3713.20 89.12
0155 MATERIAL day day day 0.86 749.00 644.14
0115 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Rate as per L.S. 0.86 645.00 554.70
0101 Item Number 3.4 of SH: Mortars LABOUR 0.05 714.00 35.70
9999 Mason (average) Coolie 2.73 2.12 5.79
Bhisti Sundries TOTAL 1329.44
Add 1 % Water charges on "W" TOTAL 13.29
Add GST on "X" (multiplying factor 0.1405) TOTAL 1342.74
Add 15% CPOH on "Y" TOTAL 188.65
Add Cess @ 1% on "Z" 1531.39
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 229.71
metre long and 1 cm wide band Say 1761.10
17.61
1778.71
17.79
17.80

13.30 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse s
layer 6 mm thick with cement mortar 1:4 (1 cement : 4
fine sand).

Code Description Unit Quantity Rate Rs. Amount Rs.


3.10 Detail of cost for 10 metre long and 10 cm wide band cum cum 0.014 3995.00 55.93
3.4 MATERIAL day day day 0.01 3713.20 37.13
0155 Cement mortar 1 : 5 (1 cement : 5 coarse sand) Rate as per L.S. 0.86 749.00 644.14
0115 Item Number 3.10 of SH: Mortars Cement mortar 1 : 4 (1 0.86 645.00 554.70
0101 cement : 4 fine sand) Rate as per Item Number 3.4 of SH: 0.05 714.00 35.70
9999 Mortars LABOUR 2.73 2.12 5.79
Mason (average) Coolie 1333.39
Bhisti Sundries TOTAL 13.33
Add 1 % Water charges on "W" TOTAL 1346.72
Add GST on "X" (multiplying factor 0.1405) TOTAL 189.21
Add 15% CPOH on "Y" TOTAL 1535.94
Add Cess @ 1% on "Z" 230.39
Cost of 10.00 metre long and 10 cm wide band Cost of 1.00 1766.33
metre long and 1 cm wide band Say 17.66
1783.99
17.84
17.85

13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):
13.31.1 Flush / Ruled/ Struck or weathered pointing

Code Description Unit Quantity Rate Rs. Amount Rs.


3.3 Detail of cost for 10 sqm MATERIAL cum 0.03 4382.15 131.46
0155 Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item day day day 0.50 749.00 374.50
0115 Number 3.3 of SH: Mortars LABOUR L.S. 0.60 645.00 387.00
0101 Mason (average) Coolie L.S. 0.93 714.00 664.02
9999 Bhisti Sundries 7.15 2.12 15.16
9999 Scaffolding and racking out joints including sundries 14.30 2.12 30.32
TOTAL 1602.46
Add 1 % Water charges on "W" TOTAL 16.02
Add GST on "X" (multiplying factor 0.1405) TOTAL 1618.48
Add 15% CPOH on "Y" TOTAL 227.40
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 1845.88
Say 276.88
2122.76
21.23
2143.99
214.40
214.40

13.31.2 Raised and cut pointing

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
3.3 Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item cum 0.046 4382.15 201.58
0155 Number 3.3 of SH: Mortars LABOUR day day day 1.07 749.00 801.43
0115 Mason (average) Coolie L.S. 1.31 645.00 844.95
0101 Bhisti Sundries L.S. 1.00 714.00 714.00
9999 Scaffolding and racking out joints including sundries 7.15 2.12 15.16
9999 TOTAL 16.12 2.12 34.17
Add 1 % Water charges on "W" TOTAL 2611.29
Add GST on "X" (multiplying factor 0.1405) TOTAL 26.11
Add 15% CPOH on "Y" TOTAL 2637.40
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 370.56
Say 3007.96
451.19
3459.15
34.59
3493.74
349.37
349.35

13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):
13.32.1 Flush/ Ruled/ Struck or weathered pointing

Code Description Unit Quantity Rate Rs. Amount Rs.


3.3 Detail of cost for 10 sqm MATERIAL cum L.S. 0.046 4382.15 201.58
9999 Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item day day day 7.15 2.12 15.16
0155 Number 3.3 of SH: Mortars Sundries L.S. 0.67 749.00 501.83
0115 LABOUR 0.80 645.00 516.00
0101 Mason (average) Coolie 1.28 714.00 913.92
9999 Bhisti 16.12 2.12 34.17
Scaffolding and racking out joints including sundries 2182.66
TOTAL 21.83
Add 1 % Water charges on "W" TOTAL 2204.49
Add GST on "X" (multiplying factor 0.1405) TOTAL 309.73
Add 15% CPOH on "Y" TOTAL 2514.22
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 377.13
Say 2891.35
28.91
2920.26
292.03
292.05

13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1 Flush/ Ruled pointing

Code Description Unit Quantity Rate Rs. Amount Rs.


3.3 Detail of cost for 10 sqm MATERIAL cum L.S. 0.023 4382.15 100.79
9999 Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item day day day 7.15 2.12 15.16
0155 Number 3.3 of SH: Mortars Sundries L.S. 0.92 749.00 689.08
0115 LABOUR 1.37 645.00 883.65
0101 Mason (average) Coolie 0.93 714.00 664.02
9999 Bhisti 16.12 2.12 34.17
Scaffolding and racking out joints including sundries 2386.87
TOTAL 23.87
Add 1 % Water charges on "W" TOTAL 2410.74
Add GST on "X" (multiplying factor 0.1405) 338.71
Add GST on "X" (multiplying factor 0.1405) 338.71

TOTAL 2749.45
Add 15% CPOH on "Y" TOTAL 412.42
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 3161.87
Say 31.62
3193.49
319.35
319.35

13.33.2 Raised and cut pointing


Code Description Unit Quantity Rate Rs. Amount Rs.
3.3 Detail of cost for 10 sqm MATERIAL cum L.S. 0.038 4382.15 166.52
9999 Cement mortar 1 : 3 (1 cement : 3 fine sand) Rate as per Item day day day 7.15 2.12 15.16
0155 Number 3.3 of SH: Mortars Sundries L.S. 2.00 749.00 1498.00
0115 LABOUR 2.96 645.00 1909.20
0101 Mason (average) Coolie 1.00 714.00 714.00
9999 Bhisti 16.12 2.12 34.17
Scaffolding and racking out joints including sundries 4337.05
TOTAL 43.37
Add 1 % Water charges on "W" TOTAL 4380.42
Add GST on "X" (multiplying factor 0.1405) TOTAL 615.45
Add 15% CPOH on "Y" TOTAL 4995.87
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 749.38
Say 5745.26
57.45
5802.71
580.27
580.25

13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust).

Code Description Unit Quantity Rate Rs. Amount Rs.


3.16 Detail of cost for 10 sqm MATERIAL cum L.S. 0.038 7790.25 296.03
9999 White Cement mortar 1:3 (1 white cement : 3 marble dust) day day day 7.15 2.12 15.16
0155 Rate as per Item Number 3.16 of SH: Mortars Sundries L.S. 2.00 749.00 1498.00
0115 LABOUR 2.96 645.00 1909.20
0101 Mason (average) Coolie 1.00 714.00 714.00
9999 Bhisti 16.12 2.12 34.17
Scaffolding and racking out joints including sundries 4466.56
TOTAL 44.67
Add 1 % Water charges on "W" TOTAL 4511.23
Add GST on "X" (multiplying factor 0.1405) TOTAL 633.83
Add 15% CPOH on "Y" TOTAL 5145.05
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 771.76
Say 5916.81
59.17
5975.98
597.60
597.60
13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):
13.35.1 Flush/ Ruled pointing

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm MATERIAL
Cement mortar 1:2 (1 cement : 2 fine sand)

3.2 Rate as per Item Number 3.2 of SH: Mortars cum 0.015 5129.25 76.94
LABOUR
0155 Mason (average) day 0.47 749.00 352.03
0115 Coolie day 0.69 645.00 445.05
0101 Bhisti day 0.59 714.00 421.26
9999 Scaffolding and racking out joints including
sundries L.S. 16.12 2.12 34.17
TOTAL 1329.45
Add 1 % Water charges on "W" 13.29
TOTAL 1342.75
Add GST on "X" (multiplying factor 0.1405) 188.66
TOTAL 1531.40
Add 15% CPOH on "Y" 229.71
TOTAL 1761.11
Add Cess @ 1% on "Z" 17.61
Cost of 10.00 sqm 1778.73
Cost of 1.00 sqm 177.87
Say 177.85
13.36 Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
9999 Scaffolding L.S. 13.39 2.12 28.39
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 56.77
Add 1 % Water charges on "W" 0.57
TOTAL 57.34
Add GST on "X" (multiplying factor 0.1405) 8.06
TOTAL 65.40
Add 15% CPOH on "Y" 9.81
TOTAL 75.21
Add Cess @ 1% on "Z" 0.75
Cost of 10.00 sqm 75.96
Cost of 1.00 sqm 7.60
Say 7.60

13.37 White washing with lime to give an even shade :


13.37.1 New work (three or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0775 Dehradun white lime quintal 0.03 600.00 18.00
9977 Carriage of lime L.S. 0.91 2.12 1.93
LABOUR
0141 White Washer day 0.20 714.00 142.80
0115 Coolie day 0.10 645.00 64.50
9999 Indigo gum etc L.S. 4.42 2.12 9.37
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 242.39
Add 1 % Water charges on "W" 2.42
TOTAL 244.81
Add GST on "X" (multiplying factor 0.1405) 34.40
TOTAL 279.21
Add 15% CPOH on "Y" 41.88
TOTAL 321.09
Add Cess @ 1% on "Z" 3.21
Cost of 10.00 sqm 324.30
Cost of 1.00 sqm 32.43
Say 32.45
13.38 Satna lime wash on walls with one coat.
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0776 Satna lime quintal 0.01 370.00 3.70
9977 Carriage of lime L.S. 2.08 2.12 4.41
9999 Indigo gum etc L.S. 0.52 2.12 1.10
LABOUR
0141 White Washer day 0.08 714.00 57.12
0115 Coolie day 0.04 645.00 25.80
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 97.92
Add 1 % Water charges on "W" 0.98
TOTAL 98.90
Add GST on "X" (multiplying factor 0.1405) 13.90
TOTAL 112.79
Add 15% CPOH on "Y" 16.92
TOTAL 129.71
Add Cess @ 1% on "Z" 1.30
Cost of 10.00 sqm 131.01
Cost of 1.00 sqm 13.10
Say 13.10

13.39 Colour washing such as green, blue or buff to give an even shade :
13.39.1 New work (two or more coats) with a base coat of white washing with lime

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0775 Dehradun white lime quintal 0.03 600.00 18.00
9977 Carriage of lime L.S. 8.06 2.12 17.09
9999 Add for colouring stuff L.S. 0.91 2.12 1.93
LABOUR
0141 White Washer day 0.30 714.00 214.20
0115 Coolie day 0.10 645.00 64.50
9999 Indigo gum etc L.S. 4.42 2.12 9.37
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 330.87
Add 1 % Water charges on "W" 3.31
TOTAL 334.18
Add GST on "X" (multiplying factor 0.1405) 46.95
TOTAL 381.14
Add 15% CPOH on "Y" 57.17
TOTAL 438.31
Add Cess @ 1% on "Z" 4.38
Cost of 10.00 sqm 442.69
Cost of 1.00 sqm 44.27
Say 44.25

13.39.2 New work (two or more coats) with a base coat of whiting

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0775 Dehradun white lime quintal 0.03 600.00 18.00
9977 Carriage of lime L.S. 8.06 2.12 17.09
9999 Add for colouring stuff L.S. 0.91 2.12 1.93
LABOUR
0141 White Washer day 0.30 714.00 214.20
0115 Coolie day 0.10 645.00 64.50
9999 Indigo gum etc L.S. 2.73 2.12 5.79
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 327.29
Add 1 % Water charges on "W" 3.27
TOTAL 330.56
Add GST on "X" (multiplying factor 0.1405) 46.44
TOTAL 377.01

Add 15% CPOH on "Y" 56.55


TOTAL 433.56
Add Cess @ 1% on "Z" 4.34
Cost of 10.00 sqm 437.90
Cost of 1.00 sqm 43.79
Say 43.80
13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0808 Water thinnable cement primer for interior wall
surface, having VOC content less than 50 gms/lit. litre 0.70 50.00 35.00
9999 Brushes, putty etc L.S. 7.15 2.12 15.16
9988 Sundries including Carriage L.S. 8.06 2.12 17.09
0802 Acrylic distemper 1st quality , having VOC content
less than 50 grams/ litre kilogram 1.50 40.00 60.00
9977 Carriage of material L.S. 4.42 2.12 9.37
9999 Brushes, sand paper and putty for filling
holes L.S. 11.70 2.12 24.80
LABOUR
0131 Painter day 1.00 714.00 714.00
0115 Coolie day 0.50 645.00 322.50
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1215.01
Add 1 % Water charges on "W" 12.15
TOTAL 1227.16
Add GST on "X" (multiplying factor 0.1405) 172.42
TOTAL 1399.57
Add 15% CPOH on "Y" 209.94
TOTAL 1609.51
Add Cess @ 1% on "Z" 16.10
Cost of 10.00 sqm 1625.60
Cost of 1.00 sqm 162.56
Say 162.55
13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufac
required shade and colour complete, as per manufacturer's specification.
13.42.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0802 Acrylic distemper 1st quality , having VOC content
less than 50 grams/ litre kilogram 1.50 40.00 60.00
9977 Carriage of material L.S. 4.42 2.12 9.37
9999 Brushes, sand paper and putty for filling holes L.S. 11.57 2.12 24.53
LABOUR
0131 Painter day 0.40 714.00 285.60
0114 Beldar day 0.46 645.00 296.70
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 693.29
Add 1 % Water charges on "W" 6.93
TOTAL 700.22
Add GST on "X" (multiplying factor 0.1405) 98.38
TOTAL 798.60
Add 15% CPOH on "Y" 119.79
TOTAL 918.39
Add Cess @ 1% on "Z" 9.18
Cost of 10.00 sqm 927.57
Cost of 1.00 sqm 92.76
Say 92.75
13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
13.43.1 Water thinnable cement primer

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0808 Water thinnable cement primer for interior wall
surface, having VOC content less than 50 gms/lit. litre 0.70 50.00 35.00
9999 Brushes, putty etc L.S. 7.15 2.12 15.16
LABOUR
0131 Painter day 0.40 714.00 285.60
0115 Coolie day 0.20 645.00 129.00
9988 Sundries including carriage L.S. 8.06 2.12 17.09
TOTAL 481.85
Add 1 % Water charges on "W" 4.82
TOTAL 486.66
Add GST on "X" (multiplying factor 0.1405) 68.38
TOTAL 555.04
Add 15% CPOH on "Y" 83.26
TOTAL 638.30
Add Cess @ 1% on "Z" 6.38
Cost of 10.00 sqm 644.68
Cost of 1.00 sqm 64.47
Say 64.45

13.44 Finishing walls with water proofing cement paint of required shade :
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0851 Water proofing cement paint kilogram 3.84 38.00 145.92
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.46 714.00 328.44
0115 Coolie day 0.23 645.00 148.35
0101 Bhisti day 0.10 714.00 71.40
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 729.66
Add 1 % Water charges on "W" 7.30
TOTAL 736.96
Add GST on "X" (multiplying factor 0.1405) 103.54
TOTAL 840.50
Add 15% CPOH on "Y" 126.08
TOTAL 966.58
Add Cess @ 1% on "Z" 9.67
Cost of 10.00 sqm 976.24
Cost of 1.00 sqm 97.62
Say 97.60
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/1

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8507 Textured exterior paint litre 3.28 280.00 918.40
0837 Acrylic Exterior Primer kilogram 2.20 100.00 220.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40

0115 Coolie day 0.30 645.00 193.50


0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.02 2.12 14.88
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1831.28
Add 1 % Water charges on "W" 18.31
TOTAL 1849.59
Add GST on "X" (multiplying factor 0.1405) 259.87
TOTAL 2109.46
Add 15% CPOH on "Y" 316.42
TOTAL 2425.88
Add Cess @ 1% on "Z" 24.26
Cost of 10.00 sqm 2450.13
Cost of 1.00 sqm 245.01
Say 245.00
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8505 Acrylic exterior paint litre 1.67 200.00 334.00
0837 Acrylic Exterior Primer Kg 2.20 100.00 220.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40
0115 Coolie day 0.30 645.00 193.50
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1247.15
Add 1 % Water charges on "W" 12.47
TOTAL 1259.62
Add GST on "X" (multiplying factor 0.1405) 176.98
TOTAL 1436.60
Add 15% CPOH on "Y" 215.49
TOTAL 1652.09
Add Cess @ 1% on "Z" 16.52
Cost of 10.00 sqm 1668.61
Cost of 1.00 sqm 166.86
Say 166.85
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of
exterior primer applied @ 2.20 kg/10 sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8506 Premium Acrylic exterior paint litre 1.43 210.00 300.30
0837 Acrylic Exterior Primer kilogram 2.20 100.00 220.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40
0115 Coolie day 0.30 645.00 193.50
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1213.45
Add 1 % Water charges on "W" 12.13
TOTAL 1225.59
Add GST on "X" (multiplying factor 0.1405) 172.19

TOTAL 1397.78
Add 15% CPOH on "Y" 209.67
TOTAL 1607.45
Add Cess @ 1% on "Z" 16.07
Cost of 10.00 sqm 1623.52
Cost of 1.00 sqm 162.35
Say 162.35
13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8504 Multi surface paint litre 1.25 300.00 375.00
8509 Special Primer (C.W.) litre 0.75 160.00 120.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40
0115 Coolie day 0.30 645.00 193.50
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.02 2.12 14.88
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1187.88
Add 1 % Water charges on "W" 11.88
TOTAL 1199.76
Add GST on "X" (multiplying factor 0.1405) 168.57
TOTAL 1368.32
Add 15% CPOH on "Y" 205.25
TOTAL 1573.57
Add Cess @ 1% on "Z" 15.74
Cost of 10.00 sqm 1589.31
Cost of 1.00 sqm 158.93
Say 158.95
13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an und
primer applied @0.75 ltr/10 sqm of approved brand and
manufacture

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8504 Multi surface paint litre 0.90 300.00 270.00
8509 Special Primer (C.W.) litre 0.75 160.00 120.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40
0115 Coolie day 0.30 645.00 193.50
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.02 2.12 14.88
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1082.88
Add 1 % Water charges on "W" 10.83
TOTAL 1093.71
Add GST on "X" (multiplying factor 0.1405) 153.67
TOTAL 1247.37
Add 15% CPOH on "Y" 187.11
TOTAL 1434.48
Add Cess @ 1% on "Z" 14.34
Cost of 10.00 sqm 1448.82
Cost of 1.00 sqm 144.88
Say 144.90
13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an
of primer applied @ 0.80 ltr/10 sqm of approved
brand and manufacture

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8504 Multi surface paint litre 0.90 300.00 270.00
8510 Metal Primer (U.G.) litre 0.80 105.00 84.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.60 714.00 428.40
0115 Coolie day 0.30 645.00 193.50
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.02 2.12 14.88
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1046.88
Add 1 % Water charges on "W" 10.47
TOTAL 1057.35
Add GST on "X" (multiplying factor 0.1405) 148.56
TOTAL 1205.90
Add 15% CPOH on "Y" 180.89
TOTAL 1386.79
Add Cess @ 1% on "Z" 13.87
Cost of 10.00 sqm 1400.66
Cost of 1.00 sqm 140.07
Say 140.05
13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:20
13.48A.1 fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 l

Code Description Unit Quantity Rate Amount


Details of cost for 10 sqm (Based on item no 13.47)
Material
0836 100% Premium acrylic dirt resistance, Silicone litre 1.43 270.00 386.10
additives exterior paint

0837 Acrylic Exterior Primer litre 0.90 100.00 90.00


9977 Carriage of material L.S. 1.56 2.12 3.31
Labour
0131 Painter day 0.45 714.00 321.30
0101 Bhisti day 0.45 714.00 321.30
9999 Brushes, sand paper etc. L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
Total 1154.25
Add 1 % Water charges on "W" 11.54
TOTAL 1165.79
Add GST on "X" (multiplying factor 0.1405) 163.79
TOTAL 1329.59
Add 15% CPOH on "Y" 199.44
TOTAL 1529.03
Add Cess @ 1% on "Z" 15.29
Cost of 10 sqm 1544.32
Cost of 1 sqm 154.43
Say 154.45
13.50 Applying priming coat:
13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0806 Ready mixed pink or grey primer on wood work (hard
and soft wood) having VOC content less than 50
grams/ litre litre 0.75 105.00 78.75
9999 Putty L.S. 2.73 2.12 5.79
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.25 714.00 178.50
0115 Coolie day 0.25 645.00 161.25
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 10.79 2.12 22.87
TOTAL 459.29
Add 1 % Water charges on "W" 4.59
TOTAL 463.88
Add GST on "X" (multiplying factor 0.1405) 65.18
TOTAL 529.06
Add 15% CPOH on "Y" 79.36
TOTAL 608.42
Add Cess @ 1% on "Z" 6.08
Cost of 10.00 sqm 614.50
Cost of 1.00 sqm 61.45
Say 61.45
13.50.2 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
4201 Aluminium primer litre 0.75 120.00 90.00
9999 Putty L.S. 2.73 2.12 5.79
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.25 714.00 178.50
0115 Coolie day 0.25 645.00 161.25
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 10.79 2.12 22.87
TOTAL 470.54
Add 1 % Water charges on "W" 4.71
TOTAL 475.24
Add GST on "X" (multiplying factor 0.1405) 66.77
TOTAL 542.02
Add 15% CPOH on "Y" 81.30
TOTAL 623.32
Add Cess @ 1% on "Z" 6.23
Cost of 10.00 sqm 629.55
Cost of 1.00 sqm 62.96
Say 62.95
13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.54 120.00 64.80
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.24 714.00 171.36
0115 Coolie day 0.24 645.00 154.80
9999 Brushes,sand paper including sundries L.S. 10.79 2.12 22.87
TOTAL 414.94
Add 1 % Water charges on "W" 4.15
TOTAL 419.09
Add GST on "X" (multiplying factor 0.1405) 58.88
TOTAL 477.97
Add 15% CPOH on "Y" 71.70
TOTAL 549.66
Add Cess @ 1% on "Z" 5.50
Cost of 10.00 sqm 555.16
Cost of 1.00 sqm 55.52
Say 55.50

13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.36 120.00 43.20
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.12 714.00 85.68
0115 Coolie day 0.12 645.00 77.40
9999 Brushes,sand paper including L.S. 7.15 2.12 15.16
TOTAL 222.26
Add 1 % Water charges on "W" 2.22
TOTAL 224.49
Add GST on "X" (multiplying factor 0.1405) 31.54
TOTAL 256.03
Add 15% CPOH on "Y" 38.40
TOTAL 294.43
Add Cess @ 1% on "Z" 2.94
Cost of 10.00 sqm 297.38
Cost of 1.00 sqm 29.74
Say 29.75
13.51 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy po
plastered surfaces :
13.51.1 One coat

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0801 Silicon and acrylic emulsion litre 1.80 120.00 216.00
9977 Carriage of material L.S. 0.52 2.12 1.10
9999 Putty etc L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.27 714.00 192.78
0115 Coolie day 0.27 645.00 174.15
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 10.79 2.12 22.87
TOTAL 623.99
Add 1 % Water charges on "W" 6.24
TOTAL 630.23
Add GST on "X" (multiplying factor 0.1405) 88.55
TOTAL 718.78
Add 15% CPOH on "Y" 107.82
TOTAL 826.60
Add Cess @ 1% on "Z" 8.27
Cost of 10.00 sqm 834.87
Cost of 1.00 sqm 83.49
Say 83.50
13.51.2 Two coats
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0801 Silicon and acrylic emulsion litre 2.88 120.00 345.60
9977 Carriage of material L.S. 0.52 2.12 1.10
9999 Putty etc L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.43 714.00 307.02
0115 Coolie day 0.43 645.00 277.35
9999 Brushes, sand paper etc L.S. 8.53 2.12 18.08
9999 Sundries L.S. 17.26 2.12 36.59
TOTAL 991.53
Add 1 % Water charges on "W" 9.92
TOTAL 1001.45
Add GST on "X" (multiplying factor 0.1405) 140.70
TOTAL 1142.15
Add 15% CPOH on "Y" 171.32
TOTAL 1313.48
Add Cess @ 1% on "Z" 13.13
Cost of 10.00 sqm 1326.61
Cost of 1.00 sqm 132.66
Say 132.65
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications inclu
appropriate priming coat, preparation of surface, etc.
complete.

13.52.1 On steel work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
PRIMING COAT
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.75 120.00 90.00
9999 Putty L.S. 2.73 2.12 5.79
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.25 714.00 178.50
0115 Coolie day 0.25 645.00 161.25
9999 Brushes, sand paper etc L.S. 5.46 2.12 11.58
9999 Sundries L.S. 10.66 2.12 22.60
EPOXY PAINTING
MATERIAL
7239 Epoxy paint litre 1.25 215.00 268.75
9977 Carriage of material L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Putty, brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1507.60
Add 1 % Water charges on "W" 15.08
TOTAL 1522.67
Add GST on "X" (multiplying factor 0.1405) 213.94
TOTAL 1736.61
Add 15% CPOH on "Y" 260.49
TOTAL 1997.10
Add Cess @ 1% on "Z" 19.97
Cost of 10.00 sqm 2017.07
Cost of 1.00 sqm 201.71
Say 201.70
13.52.2 On concrete work
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm PRIMING COAT
MATERIAL

0808 Water thinnable cement primer for interior wall surface, having litre L.S. 0.84 50.00 42.00
9999 VOC content less than 50 grams/ litre L.S. 13.52 2.12 28.66
9977 Putty Carriage LABOUR day day L.S. 0.52 2.12 1.10
0131 Painter Coolie L.S. 0.25 714.00 178.50
0115 Brushes, sand paper etc Sundries litre L.S. 0.25 645.00 161.25
9999 EPOXY PAINTING MATERIAL L.S. 2.73 2.12 5.79
9999 Epoxy paint day day L.S. 8.06 2.12 17.09
7239 Materials for filling in holes and cracks Carriage of material L.S. 1.21 215.00 260.15
9999 LABOUR 6.76 2.12 14.33
9977 Painter Coolie 1.43 2.12 3.03
0131 Putty, brushes, sand paper etc Sundries 0.54 714.00 385.56
0115 TOTAL 0.54 645.00 348.30
9999 Add 1 % Water charges on "W" TOTAL 10.79 2.12 22.87
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 6.76 2.12 14.33
Add 15% CPOH on "Y" TOTAL 1482.97
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 14.83
Say 1497.80
210.44
1708.24
256.24
1964.47
19.64
1984.12
198.41
198.40

W
X
Y
Z
13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an
even shade :
13.53.1 New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution
Code Description Unit Quantity Rate Rs. Amount Rs.

WXYZ

4202 Detail of cost for 10 sqm PRIMING COAT MATERIAL litre L.S. 0.36 120.00 43.20
9977 Red oxide Zinc chromate primer Carriage day day L.S. 0.39 2.12 0.83
0131 LABOUR litre L.S. 0.12 714.00 85.68
0114 Painter Beldar day day L.S. 0.12 645.00 77.40
9999 Brushes, sand paper etc Synthetic enamel painting MATERIAL L.S. 7.15 2.12 15.16
0834 Synthetic enamel paint in all shades except black or chocolate 0.80 165.00 132.00
9977 shade 1.43 2.12 3.03
0131 Carriage LABOUR 0.54 714.00 385.56
0115 Painter Coolie 0.54 645.00 348.30
9999 Putty, brushes, sand paper etc Sundries 6.76 2.12 14.33
9999 TOTAL 8.06 2.12 17.09
Add 1 % Water charges on "W" TOTAL 1122.57
Add GST on "X" (multiplying factor 0.1405) TOTAL 11.23
Add 15% CPOH on "Y" TOTAL 1133.80
Add Cess @ 1% on "Z" 159.30
1293.10
193.96
1487.06
14.87

Cost of 10.00 sqm 1501.94


Cost of 1.00 sqm Say 150.19
150.20

13.54 Applying a coat of mordant solution on G.S. sheet:


13.54.1 With a solution of 38 gms of copper acetate in a litre of soft water

Code Description Unit Quantity Rate Rs. Amount Rs.


4203 Detail of cost for 25 sqm MATERIAL kilogram L.S. 0.038 300.00 11.40
9999 Copper acetate Soft Water Carriage LABOUR L.S. 1.82 2.12 3.86
9977 Painter Coolie day day L.S. 0.91 2.12 1.93
0131 Brushes, sand paper etc Sundries L.S. 0.60 714.00 428.40
0115 TOTAL 0.60 645.00 387.00
9999 Add 1 % Water charges on "W" TOTAL 35.88 2.12 76.07
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 35.88 2.12 76.07
Add 15% CPOH on "Y" TOTAL 984.72
Add Cess @ 1% on "Z" Cost of 25 sqm 9.85
Cost of 1.00 sqm 994.57
Say 139.74
1134.30
170.15
1304.45
13.04
1317.49
52.70
52.70

13.54.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammo
chloride dissolved in a litre of soft water

Code Description Unit Quantity Rate Rs. Amount Rs.


4204 Detail of cost for 25 sqm MATERIAL kilogram 0.013 35.00 0.46
4205 Hydrochloric acid Copper chloride Copper nitrate Ammonium kilogram 0.013 300.00 3.90
4206 chloride Soft Water Carriage kilogram 0.013 210.00 2.73
4207 LABOUR kilogram L.S. 0.013 22.00 0.29
9999 Painter Coolie L.S. 1.82 2.12 3.86
9977 Brushes, sand paper etc Sundries day day L.S. 0.91 2.12 1.93
0131 TOTAL L.S. 0.60 714.00 428.40
0115 Add 1 % Water charges on "W" TOTAL 0.60 645.00 387.00
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 35.88 2.12 76.07
9999 Add 15% CPOH on "Y" TOTAL 35.88 2.12 76.07
Add Cess @ 1% on "Z" Cost of 25 sqm 980.69
Cost of 1.00 sqm 9.81
Say 990.50
139.16
1129.66
169.45
1299.11
12.99
1312.10
52.48
52.50

13.55 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of a
brand and manufacture, over and including a priming
of ready mixed zinc chromate yellow primer on new work:

13.55.1 100 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Area=22/7 x106.4mm x30m =10.032sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.54 120.00 64.80
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.24 714.00 171.36
0115 Coolie day 0.24 645.00 154.80
9999 Brushes, sand paper etc L.S. 10.79 2.12 22.87
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.95 100.00 95.00
9977 Carriage L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Putty, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
9999 Wire brushes for cleaning L.S. 5.33 2.12 11.30
9999 Extra for delays L.S. 61.10 2.12 129.53
TOTAL 1416.05
Add 1 % Water charges on "W" 14.16
TOTAL 1430.21
Add GST on "X" (multiplying factor 0.1405) 200.94
TOTAL 1631.15
Add 15% CPOH on "Y" 244.67
TOTAL 1875.82
Add Cess @ 1% on "Z" 18.76
Cost of 30.00 mtrs 1894.58
Cost of 1.00 metre 63.15
Say 63.15

13.55.2 150 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Area=22/7 x0.1572 m x30m =14.82sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.80 120.00 96.00
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 15.99 2.12 33.90
9977 Carriage L.S. 0.91 2.12 1.93
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 1.41 100.00 141.00
9977 Carriage L.S. 2.08 2.12 4.41
LABOUR
0131 Painter day 0.80 714.00 571.20
0115 Coolie day 0.80 645.00 516.00
9999 Putty, sand paper etc L.S. 8.06 2.12 17.09
9999 Sundries L.S. 11.96 2.12 25.36
9999 Wire brushes for cleaning L.S. 7.15 2.12 15.16
9999 Extra for delays L.S. 94.12 2.12 199.53
TOTAL 2110.81
Add 1 % Water charges on "W" 21.11
TOTAL 2131.92
Add GST on "X" (multiplying factor 0.1405) 299.53
TOTAL 2431.46
Add 15% CPOH on "Y" 364.72
TOTAL 2796.17
Add Cess @ 1% on "Z" 27.96
Cost of 30.00 mtrs 2824.14
Cost of 1.00 metre 94.14
Say 94.15
13.56 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved bran
manufacture and required colour over a priming coat of
approved steel primer on new work.

13.56.1 100 mm diameter pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 30 mtrs
Area=22/7x0.1064m x30m =10.032sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.54 120.00 64.80
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.24 714.00 171.36
0115 Coolie day 0.24 645.00 154.80
9999 Sundries L.S. 10.79 2.12 22.87
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 1.16 175.00 203.00
9977 Carriage L.S. 1.43 2.12 3.03
9999 Putty, sand paper etc L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Sundries L.S. 6.76 2.12 14.33
9999 Wire brushes for cleaning L.S. 11.96 2.12 25.36
9999 Extra for delays L.S. 66.43 2.12 140.83
TOTAL 1546.65
Add 1 % Water charges on "W" 15.47
TOTAL 1562.11
Add GST on "X" (multiplying factor 0.1405) 219.48
TOTAL 1781.59
Add 15% CPOH on "Y" 267.24
TOTAL 2048.83
Add Cess @ 1% on "Z" 20.49
Cost of 30.00 mtrs 2069.32
Cost of 1.00 metre 68.98
Say 69.00

13.56.2 150 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Area=22/7 x157.2mm x30m =14.82sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.80 120.00 96.00
9977 Carriage L.S. 0.65 2.12 1.38
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Sundries L.S. 15.99 2.12 33.90
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 1.72 175.00 301.00
9977 Carriage L.S. 2.08 2.12 4.41
9999 Putty, sand paper etc L.S. 7.93 2.12 16.81
LABOUR
0131 Painter day 0.80 714.00 571.20
0115 Coolie day 0.80 645.00 516.00
9999 Sundries L.S. 10.01 2.12 21.22
9999 Wire brushes for cleaning L.S. 17.81 2.12 37.76
9999 Extra for delays L.S. 101.40 2.12 214.97
TOTAL 2303.88
Add 1 % Water charges on "W" 23.04
TOTAL 2326.92
Add GST on "X" (multiplying factor 0.1405) 326.93
TOTAL 2653.86
Add 15% CPOH on "Y" 398.08
TOTAL 3051.93
Add Cess @ 1% on "Z" 30.52
Cost of 30.00 mtrs 3082.45
Cost of 1.00 metre 102.75
Say 102.75
13.57 Painting with oil type wood preservative of approved brand and manufacture :
13.57.1 New work (two or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0859 Oil type wood preservative litre 1.00 130.00 130.00
9977 Carriage of material L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.15 714.00 107.10
0115 Coolie day 0.15 645.00 96.75
9999 Brushes etc L.S. 4.16 2.12 8.82
9999 Sundries L.S. 3.90 2.12 8.27
TOTAL 352.04
Add 1 % Water charges on "W" 3.52
TOTAL 355.56
Add GST on "X" (multiplying factor 0.1405) 49.96
TOTAL 405.52
Add 15% CPOH on "Y" 60.83
TOTAL 466.34
Add Cess @ 1% on "Z" 4.66
Cost of 10.00 sqm 471.01
Cost of 1.00 sqm 47.10
Say 47.10
13.58 Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including pr
of base surface as per recommendations of manufacturer
to make the surface fire retardant.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
7240 Fire retardant paint litre 5.70 240.00 1368.00
9977 Carriage of material L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0114 Beldar day 0.54 645.00 348.30
9999 Putty, brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 2136.31
Add 1 % Water charges on "W" 21.36
TOTAL 2157.67
Add GST on "X" (multiplying factor 0.1405) 303.15
TOTAL 2460.83
Add 15% CPOH on "Y" 369.12
TOTAL 2829.95
Add Cess @ 1% on "Z" 28.30
Cost of 10.00 sqm 2858.25
Cost of 1.00 sqm 285.82
Say 285.80
13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectivel

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
9999 Lime L.S. 1.43 2.12 3.03
0324 Coal Tar litre 2.80 30.00 84.00
9977 Carriage of material L.S. 1.43 2.12 3.03
0771 Kerosene oil litre 0.50 50.00 25.00
LABOUR
0114 Beldar day 0.43 645.00 277.35
9999 Brushes etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 415.01

Add 1 % Water charges on "W" 4.15


TOTAL 419.16
Add GST on "X" (multiplying factor 0.1405) 58.89
TOTAL 478.05
Add 15% CPOH on "Y" 71.71
TOTAL 549.76
Add Cess @ 1% on "Z" 5.50
Cost of 10.00 sqm 555.26
Cost of 1.00 sqm 55.53
Say 55.55
13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
13.60.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0804 Premium plastic acrylic emulsion of interior grade,
having VOC content less than 50 grams/ litre litre 1.21 200.00 242.00
9999 For filling holes and cracks with putty etc L.S. 6.76 2.12 14.33
9977 Carriage of material L.S. 1.43 2.12 3.03
LABOUR 0.00
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc L.S. 10.79 2.12 22.87
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 1030.43
Add 1 % Water charges on "W" 10.30
TOTAL 1040.73
Add GST on "X" (multiplying factor 0.1405) 146.22
TOTAL 1186.96
Add 15% CPOH on "Y" 178.04
TOTAL 1365.00
Add Cess @ 1% on "Z" 13.65
Cost of 10.00 sqm 1378.65
Cost of 1.00 sqm 137.86
Say 137.85
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 1.16 175.00 203.00
9999 For filling holes and cracks with putty etc L.S. 5.33 2.12 11.30
9977 Carriage L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 982.61
Add 1 % Water charges on "W" 9.83
TOTAL 992.44
Add GST on "X" (multiplying factor 0.1405) 139.44
TOTAL 1131.87
Add 15% CPOH on "Y" 169.78
TOTAL 1301.65
Add Cess @ 1% on "Z" 13.02
Cost of 10.00 sqm 1314.67
Cost of 1.00 sqm 131.47
Say 131.45
13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0806 Ready mixed pink or grey primer on wood work (hard
and soft wood) having VOC content less than 50
grams/ litre litre 0.75 105.00 78.75
9999 Putty L.S. 2.73 2.12 5.79
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.25 714.00 178.50
0115 Coolie day 0.25 645.00 161.25
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 10.79 2.12 22.87
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 1.16 175.00 203.00
9977 Carriage of paint and material L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1430.60
Add 1 % Water charges on "W" 14.31
TOTAL 1444.90
Add GST on "X" (multiplying factor 0.1405) 203.01
TOTAL 1647.91
Add 15% CPOH on "Y" 247.19
TOTAL 1895.10
Add Cess @ 1% on "Z" 18.95
Cost of 10.00 sqm 1914.05
Cost of 1.00 sqm 191.41
Say 191.40
13.63 Painting with aluminium paint of approved brand and manufacture to give an even shade .
13.63.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0826 Aluminium paint litre 0.80 150.00 120.00
9977 Carriage of paint and material L.S. 1.43 2.12 3.03
9999 Putty etc L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 11.96 2.12 25.36
TOTAL 907.88
Add 1 % Water charges on "W" 9.08
TOTAL 916.96
Add GST on "X" (multiplying factor 0.1405) 128.83
TOTAL 1045.79
Add 15% CPOH on "Y" 156.87
TOTAL 1202.66
Add Cess @ 1% on "Z" 12.03
Cost of 10.00 sqm 1214.68
Cost of 1.00 sqm 121.47
Say 121.45
13.64 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :
13.64.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0827 Acid proof paint (chocolate or black) litre 1.16 225.00 261.00
9977 Carriage of paint L.S. 1.43 2.12 3.03
9999 Putty etc L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1040.61
Add 1 % Water charges on "W" 10.41
TOTAL 1051.02
Add GST on "X" (multiplying factor 0.1405) 147.67
TOTAL 1198.68
Add 15% CPOH on "Y" 179.80
TOTAL 1378.49
Add Cess @ 1% on "Z" 13.78
Cost of 10.00 sqm 1392.27
Cost of 1.00 sqm 139.23
Say 139.25
13.65 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
13.65.1 Two or more coats on new work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.95 100.00 95.00
9977 Carriage L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Putty, brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 860.28
Add 1 % Water charges on "W" 8.60
TOTAL 868.88
Add GST on "X" (multiplying factor 0.1405) 122.08
TOTAL 990.96
Add 15% CPOH on "Y" 148.64
TOTAL 1139.60
Add Cess @ 1% on "Z" 11.40
Cost of 10.00 sqm 1151.00
Cost of 1.00 sqm 115.10
Say 115.10

13.67 Varnishing with varnish of approved brand and manufacture :


13.67.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0856 Ordinary varnish litre 0.70 100.00 70.00
0763 Glue kilogram 0.07 75.00 5.25
0857 Superior copal varnish litre 1.16 115.00 133.40
9977 Carriage L.S. 1.43 2.12 3.03
9999 Putty for repair to holes etc L.S. 5.33 2.12 11.30
LABOUR

0131 Painter day 0.90 714.00 642.60


(0.36+0.54=0.90)
0115 Coolie day 0.90 645.00 580.50
(0.36+0.54=0.90)
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 7.15 2.12 15.16
TOTAL 1475.57
Add 1 % Water charges on "W" 14.76
TOTAL 1490.33
Add GST on "X" (multiplying factor 0.1405) 209.39
TOTAL 1699.72
Add 15% CPOH on "Y" 254.96
TOTAL 1954.67
Add Cess @ 1% on "Z" 19.55
Cost of 10.00 sqm 1974.22
Cost of 1.00 sqm 197.42
Say 197.40
13.67.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0856 Ordinary varnish litre 0.70 100.00 70.00
0763 Glue kilogram 0.07 75.00 5.25
0858 Superior spar varnish litre 1.26 115.00 144.90
9977 Carriage L.S. 1.43 2.12 3.03
9999 Repair etc L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.90 714.00 642.60
(0.36+0.54=0.90)
0115 Coolie day 0.90 645.00 580.50
(0.36+0.54=0.90)
9999 Brushes, sand paper etc L.S. 6.76 2.12 14.33
9999 Sundries L.S. 7.15 2.12 15.16
TOTAL 1481.56
Add 1 % Water charges on "W" 14.82
TOTAL 1496.37
Add GST on "X" (multiplying factor 0.1405) 210.24
TOTAL 1706.61
Add 15% CPOH on "Y" 255.99
TOTAL 1962.61
Add Cess @ 1% on "Z" 19.63
Cost of 10.00 sqm 1982.23
Cost of 1.00 sqm 198.22
Say 198.20
13.68 French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood filler

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
1000 Spirit litre 1.63 48.00 78.24
9999 Pigment L.S. 7.15 2.12 15.16
0999 Shellac kilogram 0.24 300.00 72.00
9977 Carriage of material L.S. 2.73 2.12 5.79
9999 White woolen cloth, putty L.S. 16.12 2.12 34.17
9999 Sand paper cotton etc L.S. 13.39 2.12 28.39
9999 Lineseed oil L.S. 1.43 2.12 3.03
LABOUR
0131 Painter day 3.50 714.00 2499.00
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 2752.87
Add 1 % Water charges on "W" 27.53
TOTAL 2780.39
Add GST on "X" (multiplying factor 0.1405) 390.65

TOTAL 3171.04
Add 15% CPOH on "Y" 475.66
TOTAL 3646.70
Add Cess @ 1% on "Z" 36.47
Cost of 10.00 sqm 3683.16
Cost of 1.00 sqm 368.32
Say 368.30

13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture :

13.69.1 New work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0855 Wax polish (ready made) kilogram 0.50 230.00 115.00
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.80 714.00 571.20
0115 Coolie day 0.80 645.00 516.00
9999 Soap, brushes, cloth etc L.S. 4.16 2.12 8.82
9999 Sundries L.S. 7.15 2.12 15.16
TOTAL 1227.00
Add 1 % Water charges on "W" 12.27
TOTAL 1239.27
Add GST on "X" (multiplying factor 0.1405) 174.12
TOTAL 1413.39
Add 15% CPOH on "Y" 212.01
TOTAL 1625.40
Add Cess @ 1% on "Z" 16.25
Cost of 10.00 sqm 1641.65
Cost of 1.00 sqm 164.17
Say 164.15

13.70 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0855 Wax polish (ready made) kilogram 0.10 230.00 23.00
LABOUR
0131 Painter day 0.40 714.00 285.60
0115 Coolie day 0.40 645.00 258.00
9999 Acetic acid soap, cloth etc L.S. 5.33 2.12 11.30
9988 Sundries including Carriage L.S. 8.06 2.12 17.09
TOTAL 594.99
Add 1 % Water charges on "W" 5.95
TOTAL 600.94
Add GST on "X" (multiplying factor 0.1405) 84.43
TOTAL 685.37
Add 15% CPOH on "Y" 102.81
TOTAL 788.17
Add Cess @ 1% on "Z" 7.88
Cost of 10.00 sqm 796.06
Cost of 1.00 sqm 79.61
Say 79.60

13.71 Lettering with black Japan paint of approved brand and manufacture

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 100 letters of 15 cm height MATERIAL
Black Japan paint Carriage LABOUR
0829 Painter 0.56 90.00 50.40
litre L.S.
9977 0.91 2.12 1.93
day
0131 6.00 714.00 4284.00
0115 Coolie day 2.00 645.00 1290.00
9999 Painting brushes, turpentine, stencil etc L.S. 13.39 2.12 28.39
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 5671.80
Add 1 % Water charges on "W" 56.72
TOTAL 5728.52
Add GST on "X" (multiplying factor 0.1405) 804.86
TOTAL 6533.38
Add 15% CPOH on "Y" 980.01
TOTAL 7513.39
Add Cess @ 1% on "Z" 75.13
Cost of 100 letters of 15 cm height 7588.52
Cost of 1 letters of 1 cm height 5.06
Say 5.05
13.72 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement
(1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per
metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all
per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as p
specification and direction of Engineer-in-charge (payment for
providing grooves shall be made separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Under layer 12 mm cement plaster with Cement
mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.144 4355.20 627.15
LABOUR
0155 Mason (average) day 0.67 749.00 501.83
0114 Beldar day 0.75 645.00 483.75
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding L.S. 8.97 2.12 19.02
Applying cement slurry
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
0114 Beldar day 0.25 645.00 161.25
Top layer 15 mm thick stone chipping plaster Quantity
required = 0.172 cum including wastage
Preparation of cement concrete mix 1:1/2:2
(1 cement : 1/2 coarse sand : 2 stone chipping 10 mm
nominal size)
2911 Stone chippings/ screenings 10/ 11.2 mm nominal
size cum 0.14 1200.00 168.00
2202 Carriage of Stone aggregate below 40 mm nominal
size cum 0.14 163.93 22.95
0982 Coarse sand (zone III) cum 0.04 1500.00 60.00
2203 Carriage of Coarse sand cum 0.04 163.93 6.56
0367 Portland Cement (OPC-43 grade) tonne 0.10 5000.00 500.00
2209 Carriage of Cement tonne 0.10 145.72 14.57
0114 Beldar day 0.10 645.00 64.50
0101 Bhisti day 0.05 714.00 35.70
9999 Hire and running charges of mechanical mixer L.S. 4.29 2.12 9.09
9999 Sundries L.S. 2.08 2.12 4.41
LABOUR
0123 Mason (brick layer) 1st class Day 1.75 784.00 1372.00
0114 Beldar Day 1.75 645.00 1128.75
0101 Bhisti Day 0.30 714.00 214.20
9999 Scaffolding L.S. 24.44 2.12 51.81
Labour for washing
0123 Mason (brick layer) 1st class Day 1.00 784.00 784.00
0115 Coolie Day 0.50 645.00 322.50
9999 Sundries soft brushes etc L.S. 25.22 2.12 53.47

TOTAL 7365.30
Add 1 % Water charges on "W" 73.65
TOTAL 7438.96
Add GST on "X" (multiplying factor 0.1405) 1045.17
TOTAL 8484.13
Add 15% CPOH on "Y" 1272.62
TOTAL 9756.75
Add Cess @ 1% on "Z" 97.57
Cost of 10.00 sqm 9854.32
Cost of 1.00 sqm 985.43
Say 985.45
13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, na
under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications an
of the Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Second class kail wood in plank 30 x0.015 x0.015m
=6.75cudm
Wastage @ 10% = 0.68
Total = 7.43 cudm
Assuming that the battens shall become
unserviceable after using 5 times
Cost for using once = 7.43 / 5 = 1.48 cudm
MATERIAL
1198 Second class kail wood in planks 10 cudm 0.148 260.00 38.48
9977 Carriage of wood L.S. 0.39 2.12 0.83
Labour for making battens
0112 Carpenter 2nd class day 0.15 714.00 107.10
0114 Beldar day 0.15 645.00 96.75
9999 Sundries L.S. 2.86 2.12 6.06
Labour for nailing the battens to under layer and
finishing and repairing grooves
0123 Mason (brick layer) 1st class day 0.70 784.00 548.80
0114 Beldar day 0.70 645.00 451.50
9999 Nails and cement mortar L.S. 71.76 2.12 152.13
TOTAL 1401.65
Add 1 % Water charges on "W" 14.02
TOTAL 1415.67
Add GST on "X" (multiplying factor 0.1405) 198.90
TOTAL 1614.57
Add 15% CPOH on "Y" 242.19
TOTAL 1856.75
Add Cess @ 1% on "Z" 18.57
Cost of 30.00 mtrs 1875.32
Cost of 1.00 metre 62.51
Say 62.50

13.73.2 20 mm wide and 15 mm deep groove

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Second class kail wood in plank 30 x0.02 x0.015m
=9.00 cudm
Wastage @ 10% = 0.90
Total = 9.90 cudm
Assuming that the battens shall become
unserviceable after using 5 times
Cost for using once = 9.9 / 5 = 1.98 cudm
MATERIAL
1198 Second class kail wood in planks 10 cudm 0.198 260.00 51.48
9977 Carriage of wood L.S. 0.52 2.12 1.10
Labour for making battens

0112 Carpenter 2nd class day 0.15 714.00 107.10


0114 Beldar day 0.15 645.00 96.75
9999 Sundries L.S. 2.86 2.12 6.06
Labour for nailing the battens to under layer and
finishing and repairing grooves
0123 Mason (brick layer) 1st class day 0.70 784.00 548.80
0114 Beldar day 0.70 645.00 451.50
9999 Nails and cement mortar L.S. 71.76 2.12 152.13
TOTAL 1414.93
Add 1 % Water charges on "W" 14.15
TOTAL 1429.08
Add GST on "X" (multiplying factor 0.1405) 200.79
TOTAL 1629.86
Add 15% CPOH on "Y" 244.48
TOTAL 1874.34
Add Cess @ 1% on "Z" 18.74
Cost of 30.00 mtrs 1893.08
Cost of 1.00 metre 63.10
Say 63.10
13.74 Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or
thereof.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
9999 Scaffolding L.S. 215.28 2.12 456.39
0123 Mason (brick layer) 1st class day 0.30 784.00 235.20
0114 Beldar day 0.30 645.00 193.50
0101 Bhisti day 0.15 714.00 107.10
9999 Sundries L.S. 28.60 2.12 60.63
TOTAL 1052.83
Add 1 % Water charges on "W" 10.53
TOTAL 1063.35
Add GST on "X" (multiplying factor 0.1405) 149.40
TOTAL 1212.76
Add 15% CPOH on "Y" 181.91
TOTAL 1394.67
Add Cess @ 1% on "Z" 13.95
Cost of 10.00 sqm 1408.62
Cost of 1.00 sqm 140.86
Say 140.85

13.75 Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 53.82 2.12 114.10
TOTAL 828.60
Add 1 % Water charges on "W" 8.29
TOTAL 836.88
Add GST on "X" (multiplying factor 0.1405) 117.58
TOTAL 954.47
Add 15% CPOH on "Y" 143.17
TOTAL 1097.64
Add Cess @ 1% on "Z" 10.98
Cost of 10.00 sqm 1108.61
Cost of 1.00 sqm 110.86
Say 110.85
13.76 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as
approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the u
with rust proof screws and nails and finishing the groove complete as per specifications and direction
of the Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 mtrs
Aluminium channel section 15 x 15 x 2 mm (weight
0.221 kg/mtr)
Qty = 30 + 5% wastage = 31.5 m @ 0.221
kg/m = 6.96 kg.
7306 Aluminium T or L sections kilogram 6.96 190.00 1322.40
9977 Carriage L.S. 38.98 2.12 82.64
Labour for fixing
0117 Assistant Fitter or 2nd class Fitter day 0.46 714.00 328.44
0114 Beldar day 0.15 645.00 96.75
9999 Sundries L.S. 2.86 2.12 6.06
9999 Nails and cement mortar L.S. 71.76 2.12 152.13
TOTAL 1988.42
Add 1 % Water charges on "W" 19.88
TOTAL 2008.31
Add GST on "X" (multiplying factor 0.1405) 282.17
TOTAL 2290.47
Add 15% CPOH on "Y" 343.57
TOTAL 2634.04
Add Cess @ 1% on "Z" 26.34
Cost of 30.00 mtrs 2660.38
Cost of 1.00 metre 88.68
Say 88.70
13.77 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Add for
0368 White Cement tonne 0.10 11200.00 1120.00
Deduct for ordinary cement
0367 Portland Cement (OPC-43 grade) tonne -0.10 5000.00 -500.00
TOTAL 620.00
Add 1 % Water charges on "W" 6.20
TOTAL 626.20
Add GST on "X" (multiplying factor 0.1405) 87.98
TOTAL 714.18
Add 15% CPOH on "Y" 107.13
TOTAL 821.31
Add Cess @ 1% on "Z" 8.21
Cost of 10.00 sqm 829.52
Cost of 1.00 sqm 82.95
Say 82.95
13.78 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and
aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as b
block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and
level etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL

0868 Premixed super white gypsum plaster @ 16.14kg kg 169.47 6.00 1016.82
0155 /sqm = 61.40 + 5% wastage = 161.40+8.07= 169.47 day day L.S. 1.20 749.00 898.80
0115 kg 1.20 645.00 774.00
9999 Premixed super white gypsum plaster. LABOUR 12.61 2.12 26.73
Mason (average) Coolie 2716.35
Scaffolding and sundries TOTAL 27.16
Add 1 % Water charges on "W" TOTAL 2743.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 385.46
Add 15% CPOH on "Y" TOTAL 3128.98
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 469.35
Say 3598.33
35.98
3634.31
363.43
363.45

13.79 Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity o
1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per dire
Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8733 Detail of cost for per bag of 50 kg of cement used in mortar
MATERIAL
Synthetic ployster triangular fibre of length 6 mm, effective
diameter 10-40 microns and specific gravity of 1.34 to 1.40
including labour for mixing
TOTAL 51.25
Add 1 % Water charges on "W" TOTAL 51.25
Add GST on "X" (multiplying factor 0.1405) TOTAL 0.51
Add 15% CPOH on "Y" TOTAL 51.76
Add Cess @ 1% on "Z" Cost per bag of cement 7.27
Say kg 0.125 410.00 59.04
8.86
67.89
0.68
68.57
68.55

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the p
wall surface to prepare the surface even and smooth
complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


0824 Detail of cost for 10 sqm MATERIAL kg 14.58 13.00 189.54
9977 Cement base wall care putty 10x0.001x1429 = 14.29kg L.S. 3.90 2.12 8.27
0122 Add 2% wastage= 0.29kg Total = 14.58kg Say 14.58 kg day day L.S. 0.45 784.00 352.80
0114 Carriage 0.45 645.00 290.25
9999 LABOUR 40.00 2.12 84.80
Mason (for plaster of paris work) 1st class Beldar 925.66
Scaffolding and sundries TOTAL 9.26
Add 1 % Water charges on "W" TOTAL 934.91
Add GST on "X" (multiplying factor 0.1405) TOTAL 131.36
Add 15% CPOH on "Y" 1066.27
TOTAL 159.94
1226.21

Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 12.26
Say 1238.47
123.85
123.85

13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of
brand and manufacture, including applying
additional coats wherever required, to achieve even shade and colour.

13.81.1 One coat


Code Description Unit Quantity Rate Rs. Amount Rs.
0802 Detail of cost for 10 sqm MATERIAL Kg L.S. 0.62 40.00 24.80
9999 Acrylic distemper 1st quality , having VOC content less than 50 L.S. 0.52 2.12 1.10
9988 gm/kg day day L.S. 10.79 2.12 22.87
0131 Brushes, putty etc. Sundries including carriage LABOUR 0.33 714.00 235.62
0115 Painter Coolie 0.17 645.00 109.65
9999 Scaffolding and sundries TOTAL 7.15 2.12 15.16
Add 1 % Water charges on "W" TOTAL 409.21
Add GST on "X" (multiplying factor 0.1405) TOTAL 4.09
Add 15% CPOH on "Y" TOTAL 413.30
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 58.07
Say 471.37
70.70
542.07
5.42
547.49
54.75
54.75

13.81.2 Two coats

Code Description Unit Quantity Rate Rs. Amount Rs.


0802 Detail of cost for 10 sqm MATERIAL Kg L.S. 0.99 40.00 39.60
9999 Acrylic distemper 1st quality, having VOC content less than 50 L.S. 11.57 2.12 24.53
9988 gm/kg day day L.S. 4.42 2.12 9.37
0131 Brushes, putty etc. Sundries including carriage LABOUR 0.40 714.00 285.60
0115 Painter Coolie 0.46 645.00 296.70
9999 Scaffolding and sundries TOTAL 8.06 2.12 17.09
Add 1 % Water charges on "W" TOTAL 672.89
Add GST on "X" (multiplying factor 0.1405) TOTAL 6.73
Add 15% CPOH on "Y" TOTAL 679.61
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 95.49
Say 775.10
116.27
891.37
8.91
900.28
90.03
90.05

13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of appro
and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
13.82.1 One coat

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL

0803 Acrylic emulsion , having VOC content less than 50


gm/ltr litre 0.53 94.00 49.82
9999 For filling holes and cracks with putty etc L.S. 0.52 2.12 1.10
9977 Carriage of material L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc. L.S. 8.06 2.12 17.09
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 582.88
Add 1 % Water charges on "W" 5.83
TOTAL 588.71
Add GST on "X" (multiplying factor 0.1405) 82.71
TOTAL 671.42
Add 15% CPOH on "Y" 100.71
TOTAL 772.14
Add Cess @ 1% on "Z" 7.72
Cost of 10.00 sqm 779.86
Cost of 1.00 sqm 77.99
Say 78.00

13.82.2 Two coats

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0803 Acrylic emulsion , having VOC content less than 50
gm/ltr litre 0.84 94.00 78.96
9999 For filling holes and cracks with putty etc L.S. 1.43 2.12 3.03
9977 Carriage of material L.S. 6.76 2.12 14.33
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc. L.S. 10.79 2.12 22.87
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 867.39
Add 1 % Water charges on "W" 8.67
TOTAL 876.06
Add GST on "X" (multiplying factor 0.1405) 123.09
TOTAL 999.15
Add 15% CPOH on "Y" 149.87
TOTAL 1149.02
Add Cess @ 1% on "Z" 11.49
Cost of 10.00 sqm 1160.51
Cost of 1.00 sqm 116.05
Say 116.05
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less tha
litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
13.83.1 One coat

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0804 Premium acrylic emulsion of interior grade, having
VOC content less than 50 gm/ltr. litre 0.38 200.00 76.00
9999 For filling holes and cracks with putty etc L.S. 0.52 2.12 1.10
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc. L.S. 8.06 2.12 17.09
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 599.69
Add 1 % Water charges on "W" 6.00

TOTAL 605.69
Add GST on "X" (multiplying factor 0.1405) 85.10
TOTAL 690.79
Add 15% CPOH on "Y" 103.62
TOTAL 794.40
Add Cess @ 1% on "Z" 7.94
Cost of 10.00 sqm 802.35
Cost of 1.00 sqm 80.23
Say 80.25

13.83.2 Two coats

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0804 Premium acrylic emulsion of interior grade, having
VOC content less than 50 gm/ltr. litre 0.60 200.00 120.00
9999 For filling holes and cracks with putty etc L.S. 1.43 2.12 3.03
9977 Carriage of material L.S. 6.76 2.12 14.33
LABOUR
0131 Painter day 0.54 714.00 385.56
0115 Coolie day 0.54 645.00 348.30
9999 Brushes, sand paper etc. L.S. 10.79 2.12 22.87
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 908.43
Add 1 % Water charges on "W" 9.08
TOTAL 917.51
Add GST on "X" (multiplying factor 0.1405) 128.91
TOTAL 1046.42
Add 15% CPOH on "Y" 156.96
TOTAL 1203.39
Add Cess @ 1% on "Z" 12.03
Cost of 10.00 sqm 1215.42
Cost of 1.00 sqm 121.54
Say 121.55
13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) conten
13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0806 Ready mixed pink or grey primer on wood work (hard
and soft wood) having VOC content less than 50
gms/lit. litre 0.75 105.00 78.75
9999 Putty L.S. 2.73 2.12 5.79
9977 Carriage of material L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.25 714.00 178.50
0115 Coolie day 0.25 645.00 161.25
9999 Brushes, sand paper etc. L.S. 5.33 2.12 11.30
9999 Sundries L.S. 10.79 2.12 22.87
TOTAL 459.29
Add 1 % Water charges on "W" 4.59
TOTAL 463.88
Add GST on "X" (multiplying factor 0.1405) 65.18
TOTAL 529.06
Add 15% CPOH on "Y" 79.36
TOTAL 608.42
Add Cess @ 1% on "Z" 6.08
Cost of 10.00 sqm 614.50
Cost of 1.00 sqm 61.45
Say 61.45
13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0808 Water thinnable cement primer for interior wall
surface, having VOC content less than 50 gms/lit. litre 0.70 50.00 35.00
9977 Carriage of material L.S. 8.06 2.12 17.09
0131 LABOUR day 0.40 714.00 285.60
Painter
0115 Coolie day 0.20 645.00 129.00
9999 Brushes, sand paper etc. L.S. 7.15 2.12 15.16
TOTAL 481.85
Add 1 % Water charges on "W" 4.82
TOTAL 486.66
Add GST on "X" (multiplying factor 0.1405) 68.38
TOTAL 555.04
Add 15% CPOH on "Y" 83.26
TOTAL 638.30
Add Cess @ 1% on "Z" 6.38
Cost of 10.00 sqm 644.68
Cost of 1.00 sqm 64.47
Say 64.45

13.86 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing m
approved make as per the direction of Engineer-In-
Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0772 White cement based polymer modified self curing
compound in powder form kg 46.00 15.00 690.00
i/c 2% wastage
9977 Carriage of white cement based polymer modified self
curing compound in powder form L.S. 7.80 2.12 16.54
LABOUR
0155 Mason (average) day 0.51 749.00 381.99
0115 Coolie day 0.75 645.00 483.75
9999 Extra for removing burrs, cleaning with wire brushes
and pock making with pointed tools etc. L.S. 13.39 2.12 28.39
9999 Scaffolding and sunderies L.S. 11.70 2.12 24.80
TOTAL 1625.47
Add 1 % Water charges on "W" 16.25
TOTAL 1641.72
Add GST on "X" (multiplying factor 0.1405) 230.66
TOTAL 1872.38
Add 15% CPOH on "Y" 280.86
TOTAL 2153.24
Add Cess @ 1% on "Z" 21.53
Cost of 10 sqm 2174.77
Cost of 1 sqm 217.48
Say 217.50
13.87 White washing with lime to give an even shade :
13.87.1 Old work (two or more coats)
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0775 Dehradun white lime quintal 0.02 600.00 12.00
9977 Carriage of lime L.S. 0.52 2.12 1.10
LABOUR
0141 White Washer day 0.11 714.00 78.54
0115 Coolie day 0.06 645.00 38.70
9999 Indigo gum etc L.S. 2.73 2.12 5.79
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 141.92
Add 1 % Water charges on "W" 1.42
TOTAL 143.34
Add GST on "X" (multiplying factor 0.1405) 20.14
TOTAL 163.48
Add 15% CPOH on "Y" 24.52
TOTAL 188.00
Add Cess @ 1% on "Z" 1.88
Cost of 10.00 sqm 189.88
Cost of 1.00 sqm 18.99
Say 19.00

13.87.2 Old work (one or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0775 Dehradun white lime quintal 0.01 600.00 6.00
9977 Carriage of lime L.S. 0.52 2.12 1.10
LABOUR
0141 White Washer day 0.07 714.00 49.98
0115 Coolie day 0.03 645.00 19.35
9999 Indigo gum etc L.S. 2.08 2.12 4.41
9999 Sundries ladders etc L.S. 2.73 2.12 5.79
TOTAL 86.63
Add 1 % Water charges on "W" 0.87
TOTAL 87.50
Add GST on "X" (multiplying factor 0.1405) 12.29
TOTAL 99.79
Add 15% CPOH on "Y" 14.97
TOTAL 114.76
Add Cess @ 1% on "Z" 1.15
Cost of 10.00 sqm 115.91
Cost of 1.00 sqm 11.59
Say 11.60
13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair
scratches etc. complete

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm.
LABOUR
0114 Beldar day 0.09 645.00 58.05
0115 Coolie day 0.04 645.00 25.80
0101 Bhisti day 0.04 714.00 28.56
9999 Sundries such as sand paper and scrapper L.S. 2.73 2.12 5.79
9999 Repair to scraches L.S. 1.82 2.12 3.86
TOTAL 122.06
Add 1 % Water charges on "W" 1.22
TOTAL 123.28
Add GST on "X" (multiplying factor 0.1405) 17.32
TOTAL 140.60
Add 15% CPOH on "Y" 21.09

TOTAL 161.69
Add Cess @ 1% on "Z" 1.62
Cost of 10 sqm. 163.30
Cost of 1 sqm. 16.33
Say 16.35
13.90 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manuf
an even shade :
13.90.1 Old work (one or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm.
MATERIAL
0802 Acrylic distemper 1st quality , having VOC content
less than 50 grams/ litre kilogram 1.00 40.00 40.00
9999 Brushes, putty etc. L.S. 0.52 2.12 1.10
9988 Sundries including carriage L.S. 10.79 2.12 22.87
LABOUR
0131 Painter day 0.33 714.00 235.62
0115 Coolie day 0.17 645.00 109.65
9999 Sundries L.S. 7.15 2.12 15.16
TOTAL 424.41
Add 1 % Water charges on "W" 4.24
TOTAL 428.65
Add GST on "X" (multiplying factor 0.1405) 60.23
TOTAL 488.87
Add 15% CPOH on "Y" 73.33
TOTAL 562.21
Add Cess @ 1% on "Z" 5.62
Cost of 10 sqm. 567.83
Cost of 1 sqm. 56.78
Say 56.80
13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the
smooth including necessary repairs to scratches etc.
complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm.
LABOUR
0114 Beldar day 0.11 645.00 70.95
0115 Coolie day 0.05 645.00 32.25
0101 Bhisti day 0.05 714.00 35.70
9999 Scrapper, sand paper etc. L.S. 6.24 2.12 13.23
9999 Sundries including mortar to repair the
surface L.S. 1.82 2.12 3.86
TOTAL 155.99
Add 1 % Water charges on "W" 1.56
TOTAL 157.55
Add GST on "X" (multiplying factor 0.1405) 22.14
TOTAL 179.68
Add 15% CPOH on "Y" 26.95
TOTAL 206.63
Add Cess @ 1% on "Z" 2.07
Cost of 10 sqm. 208.70
Cost of 1 sqm. 20.87
Say 20.85
13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade :

13.92.1 Old work (one or more coats)


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sqm.
MATERIAL
0845 Roofing paint for iron sheets in red colour litre 0.46 120.00 55.20
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Putty, brushes sand paper etc. L.S. 6.76 2.12 14.33
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 576.96
Add 1 % Water charges on "W" 5.77
TOTAL 582.73
Add GST on "X" (multiplying factor 0.1405) 81.87
TOTAL 664.60
Add 15% CPOH on "Y" 99.69
TOTAL 764.29
Add Cess @ 1% on "Z" 7.64
Cost of 10 sqm. 771.94
Cost of 1 sqm. 77.19
Say 77.20
13.93 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of a
brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work :
13.93.1 75 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 metres
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.41 120.00 49.20
9977 Carraige L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.18 714.00 128.52
0115 Coolie day 0.18 645.00 116.10
9999 Brushes, sand paper etc L.S. 8.19 2.12 17.36
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.73 100.00 73.00
9977 Carraige L.S. 1.04 2.12 2.20
LABOUR
0131 Painter day 0.41 714.00 292.74
0115 Coolie day 0.41 645.00 264.45
9999 Putty, sand paper etc L.S. 4.16 2.12 8.82
9999 Sundries L.S. 6.24 2.12 13.23
9999 Wire brushes for cleaning L.S. 4.42 2.12 9.37
9999 Extra for delays L.S. 40.3 2.12 85.44
TOTAL 1061.26
Add 1 % Water charges on "W" 10.61
TOTAL 1071.87
Add GST on "X" (multiplying factor 0.1405) 150.60
TOTAL 1222.47
Add 15% CPOH on "Y" 183.37
TOTAL 1405.84
Add Cess @ 1% on "Z" 14.06
Cost of 30.00 metres 1419.90
Cost of 1.00 metre 47.33
Say 47.35
13.94 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black
anticorrosive bitumastic paint of approved brand and manufacture on old work :

13.94.1 75 mm diameter pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 30 metres
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.43 100.00 43.00
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.27 714.00 192.78
0115 Coolie day 0.27 645.00 174.15
9999 Putty, sand paper etc L.S. 4.16 2.12 8.82
9999 Sundries L.S. 6.24 2.12 13.23
9999 Wire brushes for cleaning L.S. 4.42 2.12 9.37
9999 Extra for delays L.S. 26.91 2.12 57.05
TOTAL 499.22
Add 1 % Water charges on "W" 4.99
TOTAL 504.22
Add GST on "X" (multiplying factor 0.1405) 70.84
TOTAL 575.06
Add 15% CPOH on "Y" 86.26
TOTAL 661.32
Add Cess @ 1% on "Z" 6.61
Cost of 30.00 metres 667.93
Cost of 1.00 metre 22.26
Say 22.25

13.94.2 100 mm diameter pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 30 metres
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.57 100.00 57.00
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Putty, sand paper brushes etc. L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
9999 Wire brushes for cleaning L.S. 5.33 2.12 11.30
9999 Extra for delay L.S. 34.06 2.12 72.21
TOTAL 659.24
Add 1 % Water charges on "W" 6.59
TOTAL 665.83
Add GST on "X" (multiplying factor 0.1405) 93.55
TOTAL 759.38
Add 15% CPOH on "Y" 113.91
TOTAL 873.28
Add Cess @ 1% on "Z" 8.73
Cost of 30.00 metres 882.02
Cost of 1.00 metre 29.40
Say 29.40
13.94.3 150 mm diameter pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 30 metres
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.85 100.00 85.00
9977 Carriage L.S. 0.65 2.12 1.38
LABOUR
0131 Painter day 0.53 714.00 378.42
0115 Coolie day 0.53 645.00 341.85
9999 Putty, sand paper brushes etc. L.S. 8.06 2.12 17.09
9999 Sundries L.S. 11.96 2.12 25.36
9999 Wire brushes for cleaning L.S. 7.14 2.12 15.14
9999 Extra for delay L.S. 40.30 2.12 85.44
TOTAL 949.66
Add 1 % Water charges on "W" 9.50
TOTAL 959.16
Add GST on "X" (multiplying factor 0.1405) 134.76
TOTAL 1093.92
Add 15% CPOH on "Y" 164.09
TOTAL 1258.01
Add Cess @ 1% on "Z" 12.58
Cost of 30.00 metres 1270.59
Cost of 1.00 metre 42.35
Say 42.35

13.95 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and
manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work :
13.95.1 75 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 metres
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.41 120.00 49.20
9977 Carriage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.18 714.00 128.52
0115 Coolie day 0.18 645.00 116.10
9999 Sundries L.S. 8.19 2.12 17.36
MATERIAL
0826 Aluminium paint litre 0.61 150.00 91.50
9977 Carriage L.S. 1.04 2.12 2.20
9999 Putty, sand paper etc L.S. 4.16 2.12 8.82
LABOUR
0131 Painter day 0.41 714.00 292.74
0115 Coolie day 0.41 645.00 264.45
9999 Sundries L.S. 5.20 2.12 11.02
9999 Wire brushes for cleaning L.S. 9.10 2.12 19.29
9999 Extra for delays L.S. 44.85 2.12 95.08
TOTAL 1097.12
Add 1 % Water charges on "W" 10.97
TOTAL 1108.09
Add GST on "X" (multiplying factor 0.1405) 155.69
TOTAL 1263.78
Add 15% CPOH on "Y" 189.57
TOTAL 1453.35
Add Cess @ 1% on "Z" 14.53
Cost of 30.00 metres 1467.88
Cost of 1.00 metre 48.93
Say 48.95
13.95.2 100 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 metres
Area=22/7 x106.4x30m =10.032sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.54 120.00 64.80
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.24 714.00 171.36
0.18 x 10.032 / 7.67 = 0.24
0115 Coolie day 0.24 645.00 154.80
9999 Sundries L.S. 10.79 2.12 22.87
MATERIAL
0826 Aluminium paint litre 1.16 150.00 174.00
0.61 x 10.032 / 7.67 = 0.80
9977 Carriage L.S. 1.43 2.12 3.03
9999 Putty, sand paper etc L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.54 714.00 385.56
0.41 x 10.032 / 7.67 = 0.54
0115 Coolie day 0.54 645.00 348.30
9999 Sundries L.S. 6.76 2.12 14.33
9999 Wire brushes for cleaning L.S. 11.96 2.12 25.36
9999 Extra for delays L.S. 66.43 2.12 140.83
TOTAL 1517.65
Add 1 % Water charges on "W" 15.18
TOTAL 1532.82
Add GST on "X" (multiplying factor 0.1405) 215.36
TOTAL 1748.18
Add 15% CPOH on "Y" 262.23
TOTAL 2010.41
Add Cess @ 1% on "Z" 20.10
Cost of 30.00 metres 2030.52
Cost of 1.00 metre 67.68
Say 67.70

13.95.3 150 mm diameter pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 30 metres
Area=22/7 x157.12x30m =14.82 sqm
MATERIAL
4202 Red oxide Zinc chromate primer litre 0.80 120.00 96.00
9977 Carriage L.S. 0.65 2.12 1.38
LABOUR
0131 Painter Day 0.36 714.00 257.04
0.18 x 14.82 / 7.67 = 0.36
0115 Coolie Day 0.36 645.00 232.20
9999 Sundries L.S. 15.99 2.12 33.90
MATERIAL
0826 Aluminium paint litre 1.72 150.00 258.00
0.61 x 14.82 / 7.67 = 1.72
9977 Carriage L.S. 2.08 2.12 4.41
9999 Putty, sand paper etc L.S. 7.93 2.12 16.81
LABOUR
0131 Painter day 0.80 714.00 571.20
0.41 x 14.82 / 7.67 = 0.80
0115 Coolie day 0.80 645.00 516.00
9999 Sundries L.S. 10.01 2.12 21.22
9999 Wire brushes for cleaning L.S. 17.81 2.12 37.76
9999 Extra for delays L.S. 101.4 2.12 214.97
TOTAL 2260.88
Add 1 % Water charges on "W" 22.61
TOTAL 2283.49
Add GST on "X" (multiplying factor 0.1405) 320.83
TOTAL 2604.32
Add 15% CPOH on "Y" 390.65
TOTAL 2994.97
Add Cess @ 1% on "Z" 29.95
Cost of 30.00 metres 3024.92
Cost of 1.00 metre 100.83
Say 100.85
13.96 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved bran
manufacture and required colour on old work :
13.96.1 75 mm diameter pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metres
Area = 22/7x0.0814 mmx30 m = 7.67 sqm
MATERIAL
0826 Aluminium paint litre 0.35 150.00 52.50
9999 Putty, sand paper etc. L.S. 0.39 2.12 0.83
9977 Carriage L.S. 2.08 2.12 4.41
LABOUR
0131 Painter day 0.28 714.00 199.92
0115 Coolie day 0.28 645.00 180.60
9999 Putty, sand paper brushes etc. L.S. 4.16 2.12 8.82
9999 Sundries L.S. 6.24 2.12 13.23
9999 Wire brushes for cleaning L.S. 4.42 2.12 9.37
9999 Extra for delay L.S. 26.91 2.12 57.05
TOTAL 526.72
Add 1 % Water charges on "W" 5.27
TOTAL 531.99
Add GST on "X" (multiplying factor 0.1405) 74.74
TOTAL 606.74
Add 15% CPOH on "Y" 91.01
TOTAL 697.75
Add Cess @ 1% on "Z" 6.98
Cost of 30.00 metres 704.72
Cost of 1.00 metre 23.49
Say 23.50

13.96.2 100 mm diameter pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 30 metres
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
0826 Aluminium paint litre 0.46 150.00 69.00
9999 Putty, sand paper etc. L.S. 0.52 2.12 1.10
9977 Carriage L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20

9999 Putty, sand paper brushes etc. L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
9999 Wire brushes for cleaning L.S. 5.33 2.12 11.30
9999 Extra for delay L.S. 34.06 2.12 72.21
TOTAL 677.02
Add 1 % Water charges on "W" 6.77
TOTAL 683.79
Add GST on "X" (multiplying factor 0.1405) 96.07
TOTAL 779.87
Add 15% CPOH on "Y" 116.98
TOTAL 896.85
Add Cess @ 1% on "Z" 8.97
Cost of 30.00 metres 905.82
Cost of 1.00 metre 30.19
Say 30.20
13.96.3 150 mm diameter pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 30 metres
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
0826 Aluminium paint litre 0.68 150.00 102.00
9999 Putty, sand paper etc. L.S. 0.65 2.12 1.38
9977 Carriage L.S. 3.90 2.12 8.27
LABOUR
0131 Painter day 0.53 714.00 378.42
0115 Coolie day 0.53 645.00 341.85
9999 Putty, sand paper brushes etc. L.S. 7.93 2.12 16.81
9999 Sundries L.S. 11.96 2.12 25.36
9999 Wire brushes for cleaning L.S. 7.15 2.12 15.16
9999 Extra for delay L.S. 40.30 2.12 85.44
TOTAL 974.68
Add 1 % Water charges on "W" 9.75
TOTAL 984.42
Add GST on "X" (multiplying factor 0.1405) 138.31
TOTAL 1122.74
Add 15% CPOH on "Y" 168.41
TOTAL 1291.15
Add Cess @ 1% on "Z" 12.91
Cost of 30.00 metres 1304.06
Cost of 1.00 metre 43.47
Say 43.45

13.97 Painting with oil type wood preservative of approved brand and manufacture:
13.97.1 Old work (one or more coats)
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0859 Oil type wood preservative litre 0.81 130.00 105.30
9977 Carriage of material L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.11 714.00 78.54
0115 Coolie day 0.11 645.00 70.95
9999 Brushes etc L.S. 2.73 2.12 5.79
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 267.47
Add 1 % Water charges on "W" 2.67
TOTAL 270.14
Add GST on "X" (multiplying factor 0.1405) 37.95
TOTAL 308.10
Add 15% CPOH on "Y" 46.21
TOTAL 354.31
Add Cess @ 1% on "Z" 3.54
Cost of 10.00 sqm 357.85
Cost of 1.00 sqm 35.79
Say 35.80
13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
13.98.1 One or more coats on old work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0804 Premium plastic acrylic emulsion of interior grade,
having VOC content less than 50 grams/ litre litre 0.73 200.00 146.00
9999 Material for filling holes and cracks (putty etc.) L.S. 0.52 2.12 1.10
9977 Carriage of material L.S. 5.33 2.12 11.30
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 8.06 2.12 17.09
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 679.06
Add 1 % Water charges on "W" 6.79
TOTAL 685.85
Add GST on "X" (multiplying factor 0.1405) 96.36
TOTAL 782.21
Add 15% CPOH on "Y" 117.33
TOTAL 899.55
Add Cess @ 1% on "Z" 9.00
Cost of 10.00 sqm 908.54
Cost of 1.00 sqm 90.85
Say 90.85
13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

13.99.1 One or more coats on old work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0833 Synthetic enamel paint in black or chocolate shade litre 0.70 175.00 122.50
9977 Carriage of paint and materials L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Putty L.S. 2.73 2.12 5.79
9999 Brushes sand paper etc. L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 647.02
Add 1 % Water charges on "W" 6.47
TOTAL 653.49
Add GST on "X" (multiplying factor 0.1405) 91.81
TOTAL 745.30
Add 15% CPOH on "Y" 111.80
TOTAL 857.10
Add Cess @ 1% on "Z" 8.57
Cost of 10.00 sqm 865.67
Cost of 1.00 sqm 86.57
Say 86.55

13.100 Painting with aluminium paint of approved brand and manufacture to give an even shade:

13.100.1 One or more coats on old work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0826 Aluminium paint litre 0.46 150.00 69.00
9977 Carriage of paint and material L.S. 0.52 2.12 1.10
9999 Putty etc L.S. 2.73 2.12 5.79
LABOUR

0131 Painter day 0.36 714.00 257.04


0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 593.52
Add 1 % Water charges on "W" 5.94
TOTAL 599.45
Add GST on "X" (multiplying factor 0.1405) 84.22
TOTAL 683.67
Add 15% CPOH on "Y" 102.55
TOTAL 786.23
Add Cess @ 1% on "Z" 7.86
Cost of 10.00 sqm 794.09
Cost of 1.00 sqm 79.41
Say 79.40
13.101 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :
13.101.1 One or more coats on old work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0827 Acid proof paint (chocolate or black) litre 0.70 225.00 157.50
9977 Carriage of paint L.S. 0.52 2.12 1.10
9999 Putty etc L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 682.02
Add 1 % Water charges on "W" 6.82
TOTAL 688.84
Add GST on "X" (multiplying factor 0.1405) 96.78
TOTAL 785.62
Add 15% CPOH on "Y" 117.84
TOTAL 903.46
Add Cess @ 1% on "Z" 9.03
Cost of 10.00 sqm 912.50
Cost of 1.00 sqm 91.25
Say 91.25
13.102 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :

13.102.1 One or more coats on old work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.57 100.00 57.00
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Putty, brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 575.73
Add 1 % Water charges on "W" 5.76
TOTAL 581.49
Add GST on "X" (multiplying factor 0.1405) 81.70
TOTAL 663.19
Add 15% CPOH on "Y" 99.48
TOTAL 762.66
Add Cess @ 1% on "Z" 7.63
Cost of 10.00 sqm 770.29
Cost of 1.00 sqm 77.03
Say 77.05

13.103 French spirit polishing :

13.103.1 One or more coats on old work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
1000 Spirit litre 0.98 48.00 47.04
0999 Shellac kilogram 0.13 300.00 39.00
9977 Carriage of materials L.S. 0.91 2.12 1.93
9999 Turpentine oil sand paper cotton/woolen
cloth putty etc. L.S. 10.79 2.12 22.87
9999 Linseed oil L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 1.76 714.00 1256.64
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1385.67
Add 1 % Water charges on "W" 13.86
TOTAL 1399.53
Add GST on "X" (multiplying factor 0.1405) 196.63
TOTAL 1596.16
Add 15% CPOH on "Y" 239.42
TOTAL 1835.59
Add Cess @ 1% on "Z" 18.36
Cost of 10.00 sqm 1853.94
Cost of 1.00 sqm 185.39
Say 185.40

13.104 Polishing on wood work with ready made wax polish of approved brand and manufacture :

13.104.1 Old work


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0855 Wax polish (ready made) kilogram 0.25 230.00 57.50
9977 Caariage L.S. 0.39 2.12 0.83
LABOUR
0131 Painter day 0.40 714.00 285.60
0115 Coolie day 0.40 645.00 258.00
9999 Soap, brushes, cloth etc L.S. 4.16 2.12 8.82
9999 Sundries L.S. 4.42 2.12 9.37
TOTAL 620.12
Add 1 % Water charges on "W" 6.20
TOTAL 626.32
Add GST on "X" (multiplying factor 0.1405) 88.00
TOTAL 714.32
Add 15% CPOH on "Y" 107.15
TOTAL 821.46
Add Cess @ 1% on "Z" 8.21
Cost of 10.00 sqm 829.68
Cost of 1.00 sqm 82.97
Say 82.95

13.105 Re-lettering with black Japan paint of approved brand and manufacture.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 100 letters of 15 cm height
MATERIAL
0829 Black Japan paint litre 0.37 90.00 33.30
9977 Carriage L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 4.00 714.00 2856.00
0115 Coolie day 1.00 645.00 645.00
9999 Painting brushes, turpentine, stencil etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 3567.65

Add 1 % Water charges on "W" 35.68


TOTAL 3603.32
Add GST on "X" (multiplying factor 0.1405) 506.27
TOTAL 4109.59
Add 15% CPOH on "Y" 616.44
TOTAL 4726.03
Add Cess @ 1% on "Z" 47.26
Cost of 100 letters of 15 cm height 4773.29
Cost per letter per cm height 3.18
Say 3.20
13.106 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0829 Black Japan paint litre 0.70 90.00 63.00
9977 Carriage L.S. 0.52 2.12 1.10
9999 Putty etc. L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc. L.S. 5.33 2.12 11.30
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 587.52
Add 1 % Water charges on "W" 5.88
TOTAL 593.39
Add GST on "X" (multiplying factor 0.1405) 83.37
TOTAL 676.76
Add 15% CPOH on "Y" 101.51
TOTAL 778.28
Add Cess @ 1% on "Z" 7.78
Cost of 10.00 sqm 786.06
Cost of 1sqm 78.61
Say 78.60

13.107 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin:
13.107.1 32 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 no.
MATERIAL
1314 C.P.brass chain with 32 mm dia rubber plug each 1.00 40.00 40.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 57.09
Add 1 % Water charges on "W" 0.57
TOTAL 57.66
Add GST on "X" (multiplying factor 0.1405) 8.10
TOTAL 65.76
Add 15% CPOH on "Y" 9.86
TOTAL 75.62
Add Cess @ 1% on "Z" 0.76
Cost of each 76.38
Say 76.40

13.107.2 40 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 no.
MATERIAL
1315 C.P.brass chain with 40 mm dia rubber plug each 1.00 40.00 40.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 57.09
Add 1 % Water charges on "W" 0.57
TOTAL 57.66
Add GST on "X" (multiplying factor 0.1405) 8.10
TOTAL 65.76

Add 15% CPOH on "Y" 9.86


TOTAL 75.62
Add Cess @ 1% on "Z" 0.76
Cost of each 76.38
Say 76.40
13.108 Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of
shade and colour complete. as per manufacturer's specification.
13.108.1 One or more coats on old work

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0802 Acrylic distemper 1st quality , having VOC content
less than 50 grams/ litre kilogram 1.00 40.00 40.00
9999 Brushes, putty etc L.S. 0.52 2.12 1.10
9988 Sundries including carriage of material L.S. 10.76 2.12 22.81
LABOUR
0131 Painter day 0.22 714.00 157.08
0114 Beldar day 0.22 645.00 141.90
9999 Sundries L.S. 7.15 2.12 15.16
TOTAL 378.05
Add 1 % Water charges on "W" 3.78
TOTAL 381.83
Add GST on "X" (multiplying factor 0.1405) 53.65
TOTAL 435.48
Add 15% CPOH on "Y" 65.32
TOTAL 500.80
Add Cess @ 1% on "Z" 5.01
Cost of 10.00 sqm 505.81
Cost of 1.00 sqm 50.58
Say 50.60
13.109 Finishing walls with water proofing cement paint of required shade :
13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @
0.80 litrs/10 sqm complete including cost of Priming coat.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0851 Water proofing cement paint kilogram 2.20 38.00 83.60
8508 Primer for cement paint litre 0.80 90.00 72.00
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.46 714.00 328.44
0115 Coolie day 0.23 645.00 148.35
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 703.64
Add 1 % Water charges on "W" 7.04
TOTAL 710.68
Add GST on "X" (multiplying factor 0.1405) 99.85
TOTAL 810.53
Add 15% CPOH on "Y" 121.58
TOTAL 932.11
Add Cess @ 1% on "Z" 9.32
Cost of 10.00 sqm 941.43
Cost of 1.00 sqm 94.14
Say 94.15

13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0851 Water proofing cement paint kilogram 2.20 38.00 83.60
9977 Carriage of material L.S. 1.10 2.12 2.33
LABOUR
0131 Painter day 0.35 714.00 249.90
0115 Coolie day 0.12 645.00 77.40
0101 Bhisti day 0.05 714.00 35.70
9999 Brushes, sand paper etc L.S. 3.15 2.12 6.68
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 472.70
Add 1 % Water charges on "W" 4.73
TOTAL 477.42
Add GST on "X" (multiplying factor 0.1405) 67.08
TOTAL 544.50
Add 15% CPOH on "Y" 81.68
TOTAL 626.18
Add Cess @ 1% on "Z" 6.26
Cost of 10.00 sqm 632.44
Cost of 1.00 sqm 63.24
Say 63.25

13.110 Finishing walls with textured exterior paint of required shade :


13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8507 Textured exterior paint litre 3.28 280.00 918.40
9977 Carriage of material L.S. 1.56 2.12 3.31
LABOUR
0131 Painter day 0.46 714.00 328.44
0115 Coolie day 0.23 645.00 148.35
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1430.74
Add 1 % Water charges on "W" 14.31
TOTAL 1445.05
Add GST on "X" (multiplying factor 0.1405) 203.03
TOTAL 1648.08
Add 15% CPOH on "Y" 247.21
TOTAL 1895.29
Add Cess @ 1% on "Z" 18.95
Cost of 10.00 sqm 1914.24
Cost of 1.00 sqm 191.42
Say 191.40

13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8507 Textured exterior paint litre 1.82 280.00 509.60
9977 Carriage of material L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.33 714.00 235.62
0115 Coolie day 0.17 645.00 109.65
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 888.22
Add 1 % Water charges on "W" 8.88
TOTAL 897.10
Add GST on "X" (multiplying factor 0.1405) 126.04
TOTAL 1023.14
Add 15% CPOH on "Y" 153.47
TOTAL 1176.61
Add Cess @ 1% on "Z" 11.77
Cost of 10.00 sqm 1188.38
Cost of 1.00 sqm 118.84
Say 118.85

13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8505 Acrylic exterior paint litre 1.67 200.00 334.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0131 Painter day 0.46 714.00 328.44
0115 Coolie day 0.23 645.00 148.35
9999 Brushes, sand paper etc L.S. 4.81 2.12 10.20
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 834.22
Add 1 % Water charges on "W" 8.34
TOTAL 842.56
Add GST on "X" (multiplying factor 0.1405) 118.38
TOTAL 960.94
Add 15% CPOH on "Y" 144.14
TOTAL 1105.08
Add Cess @ 1% on "Z" 11.05
Cost of 10.00 sqm 1116.13
Cost of 1.00 sqm 111.61
Say 111.60

13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8505 Acrylic exterior paint litre 0.90 200.00 180.00
9977 Carriage of material L.S. 0.52 2.12 1.10
LABOUR
0131 Painter day 0.33 714.00 235.62
0115 Coolie day 0.17 645.00 109.65
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 558.62
Add 1 % Water charges on "W" 5.59
TOTAL 564.20
Add GST on "X" (multiplying factor 0.1405) 79.27
TOTAL 643.47
Add 15% CPOH on "Y" 96.52
TOTAL 740.00
Add Cess @ 1% on "Z" 7.40
Cost of 10.00 sqm 747.40
Cost of 1.00 sqm 74.74
Say 74.75

13.112 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm

MATERIAL
8506 Premium Acrylic exterior paint litre 1.43 210.00 300.30
9977 Carriage of material L.S. 1.04 2.12 2.20
LABOUR
0131 Painter day 0.46 714.00 328.44
0115 Coolie day 0.23 645.00 148.35
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 811.54
Add 1 % Water charges on "W" 8.12
TOTAL 819.66
Add GST on "X" (multiplying factor 0.1405) 115.16
TOTAL 934.82
Add 15% CPOH on "Y" 140.22
TOTAL 1075.04
Add Cess @ 1% on "Z" 10.75
Cost of 10.00 sqm 1085.79
Cost of 1.00 sqm 108.58
Say 108.60

13.112.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
8506 Premium Acrylic exterior paint litre 0.83 210.00 174.30
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0131 Painter day 0.33 714.00 235.62
0115 Coolie day 0.17 645.00 109.65
9999 Brushes, sand paper etc L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 553.74
Add 1 % Water charges on "W" 5.54
TOTAL 559.28
Add GST on "X" (multiplying factor 0.1405) 78.58
TOTAL 637.86
Add 15% CPOH on "Y" 95.68
TOTAL 733.54
Add Cess @ 1% on "Z" 7.34
Cost of 10.00 sqm 740.88
Cost of 1.00 sqm 74.09
Say 74.10
13.113 Varnishing with varnish of approved brand and manufacture:
13.113.1 One or more coats with copal varnish
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
0857 Superior copal varnish litre 0.70 115.00 80.50
9977 Carriage L.S. 0.52 2.12 1.10
9999 Repair to the surface L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 5.33 2.12 11.30
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 593.72
Add 1 % Water charges on "W" 5.94
TOTAL 599.65
Add GST on "X" (multiplying factor 0.1405) 84.25
TOTAL 683.91
Add 15% CPOH on "Y" 102.59
TOTAL 786.49
Add Cess @ 1% on "Z" 7.86
Cost of 10.00 sqm 794.36
Cost of 1.00 sqm 79.44
Say 79.45

13.113.2 One or more coats with spar varnish

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0858 Superior spar varnish litre 0.75 115.00 86.25
9977 Carriage L.S. 0.52 2.12 1.10
9999 Repair etc L.S. 2.73 2.12 5.79
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
9999 Brushes, sand paper etc L.S. 2.73 2.12 5.79
9999 Sundries L.S. 4.16 2.12 8.82
TOTAL 596.99
Add 1 % Water charges on "W" 5.97
TOTAL 602.96
Add GST on "X" (multiplying factor 0.1405) 84.72
TOTAL 687.67
Add 15% CPOH on "Y" 103.15
TOTAL 790.82
Add Cess @ 1% on "Z" 7.91
Cost of 10.00 sqm 798.73
Cost of 1.00 sqm 79.87
Say 79.85

13.114 Melamine polishing on wood work (one or more coat).

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
7241 Melamine polish litre 0.65 300.00 195.00
0006 Hire charges of Spraying machine including
electric charges day 0.78 250.00 195.00
9988 Carriage charge of Machine & Marerial L.S. 4.42 2.12 9.37
LABOUR
0131 Painter day 0.35 714.00 249.90
0114 Beldar day 0.35 645.00 225.75
9999 Sundries L.S. 4.42 2.12 9.37
TOTAL 884.39
Add 1 % Water charges on "W" 8.84
TOTAL 893.23
Add GST on "X" (multiplying factor 0.1405) 125.50

TOTAL 1018.73
Add 15% CPOH on "Y" 152.81
TOTAL 1171.54
Add Cess @ 1% on "Z" 11.72
Cost of 10.00 sqm 1183.26
Cost of 1.00 sqm 118.33
Say 118.35

13.115 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
0856 Ordinary varnish litre 0.70 100.00 70.00
9999 Glue, putty etc L.S. 2.73 2.12 5.79
9977 Carriage L.S. 1.82 2.12 3.86
9999 Painting brushes, turpentine, stencil etc L.S. 24.18 2.12 51.26
LABOUR
0131 Painter day 0.36 714.00 257.04
0115 Coolie day 0.36 645.00 232.20
TOTAL 620.15
Add 1 % Water charges on "W" 6.20
TOTAL 626.35
Add GST on "X" (multiplying factor 0.1405) 88.00
TOTAL 714.35
Add 15% CPOH on "Y" 107.15
TOTAL 821.50
Add Cess @ 1% on "Z" 8.22
Cost of 10.00 sqm 829.72
Cost of 1.00 sqm 82.97
Say 82.95
13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following
the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surf
smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Fille
allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion.
coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final m
polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion com
direction of Engineer-in-Charge.
(Final coat to be done in 1 or 2 layers without gap of time.)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
7241 Melamine Matt clear polish litre 1.56 300.00 468.00
5766 Melamine wood sealer litre 2.80 190.00 532.00
5767 Melamine solvent/thinner litre 2.85 120.00 342.00
5768 Sanding cloth 150 mm wide metre 6.00 60.00 360.00
5769 Sand papers of assorted gratings Nos 16.00 22.00 352.00
5770 Melamine wood filler putty Kg 1.50 120.00 180.00
5771 Dhoti (worm out soft cotton cloth) Nos 2.00 25.00 50.00

LABOUR
0167 Polisher 1st class day 1.66 784.00 1301.44
0168 Polisher 2nd class day 3.25 714.00 2320.50
0114 Beldrs/Coolies day 2.00 645.00 1290.00
0006 Hire charges of compressor machine spare gun etc.,
with electric charges day 1.25 250.00 312.50
9999 Sundries including scaffolding & T&P etc. L.S. 300.00 2.12 636.00
5779 Grinding buffers day 2.00 250.00 500.00
TOTAL 8644.44
Add 1 % Water charges on "W" 86.44
TOTAL 8730.88
Add GST on "X" (multiplying factor 0.1405) 1226.69
TOTAL 9957.57
Add 15% CPOH on "Y" 1493.64
TOTAL 11451.21
Add Cess @ 1% on "Z" 114.51
Cost of 10.00 sqm 11565.72
Cost of 1.00 sqm 1156.57
Say 1156.55
SUB HEAD : 14.0
REPAIRS TO BUILDING
821
SUB HEAD : 14.0
REPAIRS TO BUILDING
821

14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in
shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumpin
all complete as per direction of Engineer-in-Charge.
14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
3.4 Rate as per Item Number 3.4 of SH: Mortars cum 0.183 3713.20 679.52
LABOUR
0155 Mason (average) day 1.21 749.00 906.29
0115 Coolie day 1.29 645.00 832.05
0114 Beldar day 0.54 645.00 348.30
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 15.21 2.12 32.25
TOTAL 3455.28
Add 1 % Water charges on "W" 34.55
TOTAL 3489.83
Add GST on "X" (multiplying factor 0.1405) 490.32
TOTAL 3980.16
Add 15% CPOH on "Y" 597.02
TOTAL 4577.18
Add Cess @ 1% on "Z" 45.77
Cost of 10.00 sqm 4622.95
Cost of 1.00 sqm 462.30
Say 462.30

14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand)


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.183 4355.20 797.00
LABOUR
0155 Mason (average) day 1.21 749.00 906.29
0115 Coolie day 1.29 645.00 832.05
0114 Beldar day 0.54 645.00 348.30
0101 Bhisti day 0.92 714.00 656.88
9999 Scaffolding and sundries L.S. 15.21 2.12 32.25
TOTAL 3572.77
Add 1 % Water charges on "W" 35.73
TOTAL 3608.49
Add GST on "X" (multiplying factor 0.1405) 506.99
TOTAL 4115.49
Add 15% CPOH on "Y" 617.32
TOTAL 4732.81
Add Cess @ 1% on "Z" 47.33
Cost of 10.00 sqm 4780.14
Cost of 1.00 sqm 478.01
Say 478.00
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, em
hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to wa
floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Char
14.2.1 Door chowkhats

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each
0295 Stone Aggregate (Single size) : 20 mm nominal size
cum 0.021 1400.00 29.40
0297 Stone Aggregate (Single size) : 10 mm nominal size
cum 0.0072 1350.00 9.72
2202 Carriage of Stone aggregate below 40 mm nominal
size cum 0.0282 163.93 4.62
0982 Coarse sand (zone III) cum 0.0141 1500.00 21.15
2203 Carriage of Coarse sand cum 0.0141 163.93 2.31
0367 Portland Cement (OPC-43 grade) tonne 0.0066 5000.00 33.00
2209 Carriage of Cement tonne 0.0066 145.72 0.96
0114 Beldar day 0.027 645.00 17.42
0115 Coolie day 0.0195 645.00 12.58
0130 Mistry day 0.0084 784.00 6.59
0123 Mason (brick layer) 1st class day 0.0018 784.00 1.41
0124 Mason (brick layer) 2nd class day 0.0018 714.00 1.29
0128 Mate day 0.0012 714.00 0.86
9999 Scaffolding L.S. 1.43 2.12 3.03
9999 Hire and running charges of mechanical mixer L.S. 0.78 2.12 1.65
9999 Sundries L.S. 0.39 2.12 0.83
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.01 3044.30 30.44
9999 Cement concrete 1:2:4 filled in chase cut L.S. 24.18 2.12 51.26
9999 Painting two coats of coaltar L.S. 13.52 2.12 28.66
9999 Disposal of mulba L.S. 1.82 2.12 3.86
0155 Mason (average) day 0.50 749.00 374.50
0114 Beldar day 0.75 645.00 483.75
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 1125.07
Add 1 % Water charges on "W" 11.25
TOTAL 1136.32
Add GST on "X" (multiplying factor 0.1405) 159.65
TOTAL 1295.98
Add 15% CPOH on "Y" 194.40
TOTAL 1490.37
Add Cess @ 1% on "Z" 14.90
Cost of each 1505.28
Say 1505.30

14.2.2 Window chowkhats


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for each
0295 Stone Aggregate (Single size) : 20 mm nominal size
cum 0.014 1400.00 19.60
0297 Stone Aggregate (Single size) : 10 mm nominal size
cum 0.0048 1350.00 6.48
2202 Carriage of Stone aggregate below 40 mm nominal
size cum 0.0188 163.93 3.08
0982 Coarse sand (zone III) cum 0.0094 1500.00 14.10
2203 Carriage of Coarse sand cum 0.0094 163.93 1.54
0367 Portland Cement (OPC-43 grade) tonne 0.0044 5000.00 22.00
2209 Carriage of Cement tonne 0.0044 145.72 0.64
0114 Beldar day 0.018 645.00 11.61
0115 Coolie day 0.013 645.00 8.39

0130 Mistry day 0.0056 784.00 4.39


0123 Mason (brick layer) 1st class day 0.0012 784.00 0.94
0124 Mason (brick layer) 2nd class day 0.0012 714.00 0.86
0128 Mate day 0.0008 714.00 0.57
9999 Scaffolding and sundries L.S. 0.91 2.12 1.93
9999 Hire and running charges of mechanical mixer L.S. 0.52 2.12 1.10
9999 Sundries L.S. 0.26 2.12 0.55
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.006 3044.30 18.27
9999 Cement concrete 1:2:4 L.S. 9.88 2.12 20.95
9999 Painting two coats of coaltar L.S. 0.91 2.12 1.93
0155 Mason (average) day 0.33 749.00 247.17
0114 Beldar day 0.50 645.00 322.50
TOTAL 708.59
Add 1 % Water charges on "W" 7.09
TOTAL 715.68
Add GST on "X" (multiplying factor 0.1405) 100.55
TOTAL 816.23
Add 15% CPOH on "Y" 122.43
TOTAL 938.66
Add Cess @ 1% on "Z" 9.39
Cost of each 948.05
Say 948.05

14.2.3 Clerestory window chowkhats

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each
0295 Stone Aggregate (Single size) : 20 mm nominal size
cum 0.007 1400.00 9.80
0297 Stone Aggregate (Single size) : 10 mm nominal size
cum 0.0024 1350.00 3.24
2202 Carriage of Stone aggregate below 40 mm nominal
size cum 0.0094 163.93 1.54
0982 Coarse sand (zone III) cum 0.0047 1500.00 7.05
2203 Carriage of Coarse sand cum 0.0047 163.93 0.77
0367 Portland Cement (OPC-43 grade) tonne 0.0022 5000.00 11.00
2209 Carriage of Cement tonne 0.0022 145.72 0.32
0114 Beldar day 0.009 645.00 5.81
0115 Coolie day 0.0065 645.00 4.19
0130 Mistry day 0.0028 784.00 2.20
0123 Mason (brick layer) 1st class day 0.0006 784.00 0.47
0124 Mason (brick layer) 2nd class day 0.0006 714.00 0.43
0128 Mate day 0.0004 714.00 0.29
9999 Scaffolding and sundries L.S. 0.52 2.12 1.10
9999 Hire and running charges of mechanical mixer L.S. 0.26 2.12 0.55
9999 Sundries L.S. 0.13 2.12 0.28
Cement mortar 1 : 6 (1 cement : 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.003 3044.30 9.13
9999 Cement concrete 1:2:4 filled in chase cut L.S. 8.06 2.12 17.09
9999 Painting two coats of coaltar L.S. 0.91 2.12 1.93
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 532.80
Add 1 % Water charges on "W" 5.33
TOTAL 538.12
Add GST on "X" (multiplying factor 0.1405) 75.61
TOTAL 613.73
Add 15% CPOH on "Y" 92.06
TOTAL 705.79
Add Cess @ 1% on "Z" 7.06
Cost of each 712.85
Say 712.85
14.3 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos
vertical member of door chowkhat and 2 nos on each vertical
member of window chowkhats), including Cost of dash fasteners/ chemical fastener.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 chowkhat.
0114 Beldar day 0.027 645.00 17.42
0115 Coolie day 0.0195 645.00 12.58
0130 Mistry day 0.0084 784.00 6.59
0128 Mate day 0.0012 714.00 0.86
9999 Disposal of mulba L.S. 1.82 2.12 3.86
7019 Dash fastner/ chemical fastener each 6.00 12.50 75.00
9999 Hire charges of drill machine hire charges, Scaffolding
and Sundries L.S. 12.22 2.12 25.91
TOTAL 142.20
Add 1 % Water charges on "W" 1.42
TOTAL 143.62
Add GST on "X" (multiplying factor 0.1405) 20.18
TOTAL 163.80
Add 15% CPOH on "Y" 24.57
TOTAL 188.37
Add Cess @ 1% on "Z" 1.88
Cost of each 190.25
Say 190.25
14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the dam
walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping grou
complete as per direction of Engineer-in-Charge.
14.4.1 For door/ window/ clerestory window

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one opening of size 0.90x2.10m =
1.89 sqm
Cement mortar 1:6 (1 cement: 6 fine sand)
3.6 Rate as per Item Number 3.6 of SH: Mortars cum 0.01 3044.30 30.44
9999 Cement concrete 1:2:4 filled in chase cut L.S. 24.57 2.12 52.09
0124 Mason (brick layer) 2nd class day 0.50 714.00 357.00
0114 Beldar day 1.20 645.00 774.00
0115 Coolie day 0.40 645.00 258.00
9999 Scaffolding and Sundries L.S. 3.50 2.12 7.42
TOTAL 1478.95
Add 1 % Water charges on "W" 14.79
TOTAL 1493.74
Add GST on "X" (multiplying factor 0.1405) 209.87
TOTAL 1703.61
Add 15% CPOH on "Y" 255.54
TOTAL 1959.15
Add Cess @ 1% on "Z" 19.59
Cost of 1.89sqm. 1978.74
Cost of 1.00 sqm. 1046.95
Say 1046.95
14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 glasses area each 0.1sqm. MATERIAL
Float glass panes of nominal thickness 4 mm (weight
2406 not less than 10kg/sqm).

sqm 1.10 309.00 339.90

9988 1.00 sqm + 10% wastage= 1.10 Sqm Carriage including L.S. 1.82 2.12 3.86
0863 sundries kilogram L.S. 0.68 28.00 19.04
9999 Putty for wood work L.S. 5.33 2.12 11.30
9999 Painting or varnishing or beewaxing Sundries Nails etc. day day L.S. 6.76 2.12 14.33
0119 Glazier Beldar 0.23 714.00 164.22
0114 Sundries such as Rag, cotton etc TOTAL 0.23 645.00 148.35
9999 Add 1 % Water charges on "W" TOTAL 1.43 2.12 3.03
Add GST on "X" (multiplying factor 0.1405) TOTAL 704.03
Add 15% CPOH on "Y" TOTAL 7.04
Add Cess @ 1% on "Z" Cost of 1.00 sqm 711.07
Say 99.91
810.98
121.65
932.62
9.33
941.95
941.95
14.5.2
Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


2407 Detail of cost for 10 glasses area each 0.1sqm. MATERIAL sqm L.S. 1.10 515.00 566.50
9988 Float glass panes of nominal thickness 5 mm (weight not less kilogram L.S. 1.82 2.12 3.86
0863 than 12.5kg/sqm) L.S. 0.68 28.00 19.04
9999 1.00 sqm + 10% wastage= 1.10 Sqm Carriage including day day L.S. 5.33 2.12 11.30
9999 sundries 6.76 2.12 14.33
0119 Putty for wood work 0.23 714.00 164.22
0114 Painting or varnishing or beewaxing Sundries Nails etc. 0.23 645.00 148.35
9999 Glazier Beldar 1.43 2.12 3.03
Sundries such as Rag, cotton etc TOTAL 930.63
Add 1 % Water charges on "W" TOTAL 9.31
Add GST on "X" (multiplying factor 0.1405) TOTAL 939.94
Add 15% CPOH on "Y" TOTAL 132.06
Add Cess @ 1% on "Z" Cost of 1.00 sqm 1072.00
Say 160.80
1232.80
12.33
1245.13
1245.15

14.6 Renewing glass panes, with wooden fillets wherever necessary:


14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


2406 Detail of cost for 10 glasses area each 0.1sqm. MATERIAL sqm 10 cudm 1.10 309.00 339.90
1189 Float glass panes of nominal thickness 4 mm (weight not less 10 cudm 0.025 776.00 19.40
1194 than 10kg/sqm). 10 cudm L.S. 0.025 500.00 12.50
1196 1.00 sqm + 10% wastage= 1.10 Sqm Second class teak wood L.S. 0.025 300.00 7.50
9999 in scantling Second class deodar wood in planks First class kail day day day 4.42 2.12 9.37
9999 wood in planks Painting or varnishing or beewaxing Sundries L.S. 2.73 2.12 5.79
0112 Nails etc. 0.20 714.00 142.80
0119 Carpenter 2nd class Glazier 0.25 714.00 178.50
0114 Beldar 0.45 645.00 290.25
9999 Sundries such as Rag, cotton etc TOTAL 1.82 2.12 3.86
Add 1 % Water charges on "W" 1009.87
10.10

TOTAL 1019.97
Add GST on "X" (multiplying factor 0.1405) TOTAL 143.31
Add 15% CPOH on "Y" TOTAL 1163.27
Add Cess @ 1% on "Z" Cost of 1.00 sqm 174.49
Say 1337.76
13.38
1351.14
1351.15

14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
Code Description Unit Quantity Rate Rs. Amount Rs.
2407 Detail of cost for 10 glasses area each 0.1sqm. MATERIAL sqm 10 cudm 1.10 515.00 566.50
1189 Float glass sheet of nominal thickness 10 cudm 0.025 776.00 19.40
1194 Float glass panes of nominal thickness 5 mm (weight not less 10 cudm L.S. 0.025 500.00 12.50
1196 than 12.5kg/sqm) L.S. 0.025 300.00 7.50
9999 1.00 sqm + 10% wastage= 1.10 Sqm Second class teak wood day day day 4.42 2.12 9.37
9999 in scantling Second class deodar wood in planks First class kail L.S. 2.73 2.12 5.79
0112 wood in planks Painting or varnishing or beewaxing Sundries 0.20 714.00 142.80
0119 Nails etc. 0.25 714.00 178.50
0114 Carpenter 2nd class Glazier 0.45 645.00 290.25
9999 Beldar 1.82 2.12 3.86
Sundries such as Rag, cotton etc TOTAL 1236.47
Add 1 % Water charges on "W" TOTAL 12.36
Add GST on "X" (multiplying factor 0.1405) TOTAL 1248.83
Add 15% CPOH on "Y" TOTAL 175.46
Add Cess @ 1% on "Z" Cost of 1.00 sqm 1424.29
Say 213.64
1637.94
16.38
1654.31
1654.30

14.7 Renewing glass panes and refixing existing wooden fillets:


14.7.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


2406 Detail of cost for 10 glasses area each 0.1sqm. MATERIAL sqm L.S. 1.10 309.00 339.90
9977 Float glass sheet of nominal thickness 4 mm (weight not less L.S. 2.73 2.12 5.79
9999 than 10kg/sqm). L.S. 9.88 2.12 20.95
9999 1.00 sqm + 10% wastage= 1.10 Sqm Carriage of glasspanes day day L.S. 5.33 2.12 11.30
0119 and other materials Sundries Nails etc. 0.30 714.00 214.20
0114 Methylated spirit Glazier 0.30 645.00 193.50
9999 Beldar Sundries TOTAL 1.43 2.12 3.03
Add 1 % Water charges on "W" TOTAL 788.66
Add GST on "X" (multiplying factor 0.1405) TOTAL 7.89
Add 15% CPOH on "Y" TOTAL 796.55
Add Cess @ 1% on "Z" Cost of 1.00 sqm 111.92
Say 908.47
136.27
1044.74
10.45
1055.18
1055.20

14.7.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.

Detail of cost for 10 glasses area each


0.1sqm.
MATERIAL
2407 Float glass panes of nominal thickness 5 mm (weight
not less than 12.5kg/sqm) sqm 1.10 515.00 566.50
1.00 sqm + 10% wastage= 1.10 Sqm
9977 Carriage of glasspanes and other materials L.S. 2.73 2.12 5.79
9999 Sundries Nails etc. L.S. 9.88 2.12 20.95
9999 Methylated spirit L.S. 5.33 2.12 11.30
0119 Glazier day 0.30 714.00 214.20
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 1015.26
Add 1 % Water charges on "W" 10.15
TOTAL 1025.42
Add GST on "X" (multiplying factor 0.1405) 144.07
TOTAL 1169.49
Add 15% CPOH on "Y" 175.42
TOTAL 1344.91
Add Cess @ 1% on "Z" 13.45
Cost of 1.00 sqm 1358.36
Say 1358.35
14.8 Supplying and fixing new wooden fillets wherever necessary:
14.8.1 2nd class teak wood fillets

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres length
MATERIAL
1190 Second class teak wood in planks 10 cudm 0.115 791.00 90.97
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails L.S. 26.91 2.12 57.05
LABOUR
0112 Carpenter 2nd class day 0.25 714.00 178.50
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 493.55
Add 1 % Water charges on "W" 4.94
TOTAL 498.49
Add GST on "X" (multiplying factor 0.1405) 70.04
TOTAL 568.52
Add 15% CPOH on "Y" 85.28
TOTAL 653.80
Add Cess @ 1% on "Z" 6.54
Cost of 10.00 metre 660.34
Cost of 1.00 metre 66.03
Say 66.05

14.8.2 Hollock wood fillets

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres length
MATERIAL
2466 Hollock wood in scantling 10 cudm 0.115 357.00 41.06
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails L.S. 26.91 2.12 57.05
LABOUR
0112 Carpenter 2nd class day 0.25 714.00 178.50
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 443.64
Add 1 % Water charges on "W" 4.44
TOTAL 448.08

Add GST on "X" (multiplying factor 0.1405) 62.95


TOTAL 511.03
Add 15% CPOH on "Y" 76.65
TOTAL 587.69
Add Cess @ 1% on "Z" 5.88
Cost of 10.00 metre 593.57
Cost of 1.00 metre 59.36
Say 59.35
14.9 Renewal of old putty of glass panes (length)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 13 metres length
MATERIAL
0863 Putty for wood work kilogram 0.68 28.00 19.04
9999 Nails L.S. 7.15 2.12 15.16
9999 Spirit L.S. 2.73 2.12 5.79
LABOUR
0112 Carpenter 2nd class day 0.30 714.00 214.20
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 450.72
Add 1 % Water charges on "W" 4.51
TOTAL 455.22
Add GST on "X" (multiplying factor 0.1405) 63.96
TOTAL 519.18
Add 15% CPOH on "Y" 77.88
TOTAL 597.06
Add Cess @ 1% on "Z" 5.97
Cost of 13.00 metres 603.03
Cost of 1.00 metre 46.39
Say 46.40
14.10 Refixing old glass panes with putty and nails
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 sqm
0863 Putty for wood work kilogram 0.68 28.00 19.04
9999 Spirit L.S. 2.73 2.12 5.79
9999 Nails L.S. 7.15 2.12 15.16
LABOUR
0119 Glazier day 0.30 714.00 214.20
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 450.72
Add 1 % Water charges on "W" 4.51
TOTAL 455.22
Add GST on "X" (multiplying factor 0.1405) 63.96
TOTAL 519.18
Add 15% CPOH on "Y" 77.88
TOTAL 597.06
Add Cess @ 1% on "Z" 5.97
Add 15 % Contractor's profit and overheads 603.03
Cost of 1.00 sqm 603.03
Say 603.05
14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 sqm
LABOUR
0119 Glazier day 0.30 714.00 214.20
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 1.43 2.12 3.03
9999 Nails L.S. 3.90 2.12 8.27
TOTAL 419.00
Add 1 % Water charges on "W" 4.19
TOTAL 423.19

Add GST on "X" (multiplying factor 0.1405) 59.46


TOTAL 482.65
Add 15% CPOH on "Y" 72.40
TOTAL 555.04
Add Cess @ 1% on "Z" 5.55
Cost of 1.00 sqm 560.60
Say 560.60
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, a
clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the
portion of
the clamps complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for each fan clamp.
MATERIAL
M.S.bar 16mm dia = 40cm (including wastage) @ 1.58
kg/m = 0.632 kg
1003 Mild steel round bar above 12 mm dia quintal 0.00632 4750.00 30.02
9999 Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4
graded stone aggregate 20mm nominal size) mortar
for rendering or plastering L.S. 13.52 2.12 28.66
9999 Painting two or more coats to exposed portion of the
clamp including priming coat L.S. 7.15 2.12 15.16
Labour for fixing
0102 Blacksmith 1st class day 0.03 784.00 23.52
0124 Mason (brick layer) 2nd class day 0.12 714.00 85.68
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 350.08
Add 1 % Water charges on "W" 3.50
TOTAL 353.58
Add GST on "X" (multiplying factor 0.1405) 49.68
TOTAL 403.26
Add 15% CPOH on "Y" 60.49
TOTAL 463.75
Add Cess @ 1% on "Z" 4.64
Cost of each 468.38
Say 468.40
14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing m
plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cem
1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material
dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
(i) Dismantling tiles/bricks in cement mortar including removing
mud plaster and cleaning the tiles/bricks

0155 LABOUR day day 0.54 749.00 404.46


0114 Mason (average) day 0.54 645.00 348.30
0155 Beldar cum quintal 0.27 749.00 202.23
3.18 (ii) Preparing the surface, for mud phuska to proper slope, 0.24 823.15 197.56
0308 relaying mud plaster gobri leeping. 0.084 500.00 42.00
Mason (average)
25mm thick mud plaster including gobri leaping MATERIAL
Mud mortar
Rate as per Item Number 3.18 of SH: Mortars Bhusa

Gobri mortar
3.18 Rate as per Item Number 3.18 of SH: Mortars cum 0.12 823.15 98.78
LABOUR
0114 Beldar day 0.25 645.00 161.25
(iii) relaying tiles/bricks including Cement mortar 1:3 (1
Cement : 3 fine sand) for grouting
3.3 Rate as per item No 3.3 of SH: Mortars cum 0.061 4382.15 267.31
LABOUR
0155 Mason (average) day 1.20 749.00 898.80
0114 Beldar day 1.50 645.00 967.50
0101 Bhisti day 1.00 714.00 714.00
9999 Disposal of mulba L.S. 5.33 2.12 11.30
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 4319.27
Add 1 % Water charges on "W" 43.19
TOTAL 4362.47
Add GST on "X" (multiplying factor 0.1405) 612.93
TOTAL 4975.39
Add 15% CPOH on "Y" 746.31
TOTAL 5721.70
Add Cess @ 1% on "Z" 57.22
Cost of 10.00 sqm 5778.92
Cost of 1.00 sqm 577.89
Say 577.90
14.14 Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary repairs a
pointing with same mortar complete, including disposal of rubbish to dumping ground, all complete as per direction of Engineer-in-
14.14.1 Red/ white sand stone slabs 30 to 50 mm thick

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
Dismantling existing stone, slabs roofing 1x10
sqmx0.05m = 0.50 cum.
0114 Beldar day 0.885 645.00 570.83
0115 Coolie day 0.375 645.00 241.88
9999 Sundries L.S. 4.03 2.12 8.54
9999 Cleaning the surface including necessary repairs L.S. 40.43 2.12 85.71
1174 Red sand stone slab 45 mm and 50 mm thick (un-
dressed) sqm 11.00 260.00 2860.00
2216 Carriage of Stone blocks white & red sand stone &
kota stone slab tonne 1.41 145.72 205.47
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per Item Number 3.9 of SH: Mortars cum 0.0105 4355.20 45.73
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per Item Number 3.3 of SH: Mortars cum 0.0075 4382.15 32.87
0155 Mason (average) day 1.69 749.00 1265.81
0100 Bandhani day 2.03 714.00 1449.42
0115 Coolie day 1.69 645.00 1090.05
0101 Bhisti day 0.34 714.00 242.76
9999 Sundries L.S. 16.12 2.12 34.17
2264 Carriage of Rubbish cum 0.50 163.93 81.97
TOTAL 8215.20
Add 1 % Water charges on "W" 82.15
TOTAL 8297.35
Add GST on "X" (multiplying factor 0.1405) 1165.78
TOTAL 9463.12
Add 15% CPOH on "Y" 1419.47
TOTAL 10882.59
Add Cess @ 1% on "Z" 108.83
Cost of 10.00 sqm 10991.42
Cost of 1.00 sqm 1099.14
Say 1099.15
14.15 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative
approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of En
Charge.
14.15.1 Sal wood battens

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 battens i.e. 300 cudm
3 metres long of 100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm, Total = 306 cudm
MATERIAL
1199 Sal wood in scantling 10 cudm 30.60 600.00 18360.00
2204 Carriage of Timber cum 0.306 187.35 57.33
LABOUR
Taking out the existing battens and refixing new one
including supporting the roof
0112 Carpenter 2nd class day 0.50 714.00 357.00
0114 Beldar day 2.00 645.00 1290.00
9999 Disposal of mulba L.S. 5.33 2.12 11.30
9999 Making good the holes including sundries L.S. 80.73 2.12 171.15
0859 Oil type wood preservative litre 1.22 130.00 158.60
0131 Painter day 0.183 714.00 130.66
0115 Coolie day 0.183 645.00 118.04
9977 Carriage L.S. 0.78 2.12 1.65
9999 Brushes L.S. 5.07 2.12 10.75
9999 Sundries L.S. 4.81 2.12 10.20
TOTAL 20676.67
Add 1 % Water charges on "W" 206.77
TOTAL 20883.44
Add GST on "X" (multiplying factor 0.1405) 2934.12
TOTAL 23817.56
Add 15% CPOH on "Y" 3572.63
TOTAL 27390.20
Add Cess @ 1% on "Z" 273.90
Cost of 300 Cudm 27664.10
Cost of 1.00 cum 92213.67
Say 92213.65
14.16 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative o
brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in
14.16.1 Not exceeding 4.00 metres in length.
14.16.1.1 Sal wood beams

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 300 cudm or 0.3 cum Consider one beam i.e.
300 cudm.
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum =306 cudm
(i) Propping the roof MATERIAL
100mm diameter ballies 4m long 10 nos. 100x100mm salwood
battens 1.0 metre
long 5 nos.x1.0x0.1x0.1 =0.05cum = 50 cudm. These materials
can be used for 16 times Hence qty for one operation 1/16 =
3.125 cudm
Sal wood in scantling Carriage of Timber LABOUR
Carpenter 2nd class

1199 0.3125 600.00 187.50


2204 10 cudm cum 0.003125 187.35 0.59
0112 day 0.25 714.00 178.50
0114 Beldar day 0.25 645.00 161.25
0155 (ii) Taking out the existing beams etc. LABOUR day day day 0.13 749.00 97.37
0100 Mason (average) Bandhani 10 cudm cum 0.50 714.00 357.00
0114 Beldar day day day 0.33 645.00 212.85
1199 (iii) Renewal Materials and Labour Sal wood in scantling litre day day 30.60 600.00 18360.00
2204 Carriage of Timber Carpenter 2nd class Bandhani L.S. 0.306 187.35 57.33
0112 Beldar L.S. 1.00 714.00 714.00
0100 Painting with oil preservative L.S. 0.50 714.00 357.00
0114 (4x1.1) +( 2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1 L.S. 1.00 645.00 645.00
0859 litre/10sqm = 0.455 litre Oil type wood preservative Painter L.S. 0.455 130.00 59.15
0131 Coolie Sundries Carriage Brushes metre 0.07 714.00 49.98
0115 Making good the holes Sundries 0.07 645.00 45.15
9999 Safeda ballies 125 mm diameter TOTAL 0.13 2.12 0.28
9977 Add 1 % Water charges on "W" TOTAL 1.82 2.12 3.86
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 1.82 2.12 3.86
9999 Add 15% CPOH on "Y" TOTAL 20.67 2.12 43.82
9999 Add Cess @ 1% on "Z" Cost of 300 Cudm Cost of 1.00 cum 26.91 2.12 57.05
0302 Say 2.50 40.00 100.00
21691.53
216.92
21908.44
3078.14
24986.58
3747.99
28734.56
287.35
29021.91
96739.70
96739.70

14.16.1.2 Hollock wood beams


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 300 cudm or 0.3 cum Consider one beam
0.25 x 0.30m x 4.0m (long) = 0.30 cum= 300 cudm
Add wastage @ 2% (0.006 cum)= 0.306 cum
=306cudm
(I) Propping the roof MATERIAL
100mm diameter ballies 4m long 10 nos. 100x100mm hollock
wood battens 1.0metre long 5 nos.x1.0x0.1x0.1 =0.05cum = 50
cudm.
These materials can be used for 16 times hence qty for one
operation 1/16 = 3.125 cudm
Hollock wood in scantling Carriage of Timber LABOUR
Carpenter 2nd class Beldar
(ii) Taking out the existing beams etc. LABOUR
Mason (average) Bandhani
2466 Beldar 0.3125 357.00 111.56
2204 (iii) Renewal Materials and Labour 0.003125 187.35 0.59
0112 Hollock wood in scantling 10 cudm cum 0.25 714.00 178.50
0114 day day 0.25 645.00 161.25
0155 day day day 0.13 749.00 97.37
0100 10 cudm 0.50 714.00 357.00
0114 0.33 645.00 212.85
2466 30.60 357.00 10924.20

2204 Carriage of Timber Carpenter 2nd class Bandhani cum day day 0.306 187.35 57.33
0112 Beldar day 1.00 714.00 714.00
0100 Painting with oil preservative litre day day 0.50 714.00 357.00
0114 (4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15= 4.55 sqm @ 1 L.S. 1.00 645.00 645.00
0859 litre/10sqm = 0.455 litre Oil type wood preservative Painter L.S. 0.455 130.00 59.15
0131 Coolie Sundries Carriage Brushes L.S. 0.07 714.00 49.98
0115 Making good the holes Sundries L.S. 0.07 645.00 45.15
9999 Safeda ballies 125 mm diameter TOTAL L.S. 0.13 2.12 0.28
9977 Add 1 % Water charges on "W" TOTAL metre 1.82 2.12 3.86
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 1.82 2.12 3.86
9999 Add 15% CPOH on "Y" TOTAL 20.67 2.12 43.82
9999 Add Cess @ 1% on "Z" Cost of 300 Cudm Cost of 1.00 cum 26.91 2.12 57.05
0302 Say 2.50 40.00 100.00
14179.79
141.80
14321.59
2012.18
16333.77
2450.07
18783.84
187.84
18971.67
63238.90
63238.90

14.16.2 Above 4.00 metres and upto 5.00 metres length.


14.16.2.1 Sal wood beams
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 375 cudm or 0.375 cum Consider one beam
i.e. 375 cudm.
0.25 x 0.30m x 5.0m (long) = 0.375 cum Add wastage @ 2%
(0.008 cum)
= 0.383 cum = 383cudm
(i) Propping the roof MATERIAL
125mm diameter ballies 5m long 12 nos 100x100mm salwood
battens 1.0 metre long 6 nos. x1.0x0.1x0.1 = 60 cudm.
These materials can be used for 16 times hence qty for one
operation 1/16 = 3.75 cudm
Sal wood in scantling Carriage of Timber LABOUR
Carpenter 2nd class Beldar
(ii) Taking out the existing beams etc. LABOUR
Mason (average) Bandhani
Beldar
(iii) Renewal Materials and Labour Sal wood in scantling
1199 Carriage of Timber Carpenter 2nd class Bandhani 0.375 600.00 225.00
2204 Beldar 0.00375 187.35 0.70
0112 Painting with oil preservative 0.25 714.00 178.50
0114 (2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 0.25 645.00 161.25
0155 sqm @ 1 litre/10sqm = 0.565 litre 10 cudm cum 0.25 749.00 187.25
0100 Oil type wood preservative Painter day day 0.63 714.00 449.82
0114 day day day 0.50 645.00 322.50
1199 10 cudm cum 38.30 600.00 22980.00
2204 day day day 0.383 187.35 71.76
0112 litre day 1.00 714.00 714.00
0100 1.00 714.00 714.00
0114 2.00 645.00 1290.00
0859 0.565 130.00 73.45
0131 0.08 714.00 57.12

0115 Coolie Sundries Carriage Brushes day L.S. 0.08 645.00 51.60
9999 Making good the holes Sundries L.S. 0.26 2.12 0.55
9977 Safeda ballies 125 mm diameter TOTAL L.S. 2.34 2.12 4.96
9999 Add 1 % Water charges on "W" TOTAL L.S. 2.21 2.12 4.69
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL L.S. 20.67 2.12 43.82
9999 Add 15% CPOH on "Y" TOTAL metre 33.15 2.12 70.28
0302 Add Cess @ 1% on "Z" Cost of 375 Cudm Cost of 1.00 cum 3.75 40.00 150.00
Say 27751.24
277.51
28028.76
3938.04
31966.80
4795.02
36761.82
367.62
37129.43
99011.81
99011.80
14.16.2.2
Hollock wood beams

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 375 cudm or 0.375 cum Consider one beam
i.e. 375 cudm.
0.25 x 0.30m x 5.0m (long) = 0.375 cum Add wastage @ 2%
(0.008 cum)
= 0.383 cum = 383cudm
(i) Propping the roof MATERIAL
125mm diameter ballies 5m long 12 nos 100x100mm hollock
wood battens 1.0 metre long 6 nos. x1.0x0.1x0.1 = 60 cudm.
These materials can be used for 16 times hence qty for one
operation 1/16 = 3.75 cudm
Hollock wood in scantling Carriage of Timber LABOUR
Carpenter 2nd class Beldar
(ii) Taking out the existing beams etc. LABOUR
Mason (average) Bandhani 133.88
Beldar 7.03
2466 (iii) Renewal Materials and Labour 0.375 357.00
178.50
2204 Hollock wood in scantling Carriage of Timber Carpenter 2nd 0.0375 187.35
161.25
0112 class Bandhani 0.25 714.00
187.25
0114 Beldar 0.25 645.00
449.82
0155 Painting with oil preservative 0.25 749.00
10 cudm cum 322.50
0100 (2x5x0.25)+3.0 + 2.0x0.25x0.30= 5.5 + 0.15 = 5.65 0.63 714.00
day day 13673.10
0114 sqm @ 1 litre/10sqm = 0.565 litre Oil type wood preservative 0.50 645.00
day day day 71.76
2466 Painter 38.30 357.00
10 cudm cum 714.00
2204 Coolie Sundries Carriage Brushes 0.383 187.35
day day day 714.00
0112 Making good the holes Sundries 1.00 714.00
litre day day 1290.00
0100 Safeda ballies 125 mm diameter TOTAL 1.00 714.00
L.S. 73.45
0114 Add 1 % Water charges on "W" 2.00 645.00
L.S. 57.12
0859 TOTAL 0.565 130.00
L.S. 51.60
0131 0.08 714.00
L.S. 0.55
0115 0.08 645.00
L.S. 4.96
9999 0.26 2.12
metre 4.69
9977 2.34 2.12
43.82
9999 2.21 2.12
70.28
9999 20.67 2.12
150.00
9999 33.15 2.12
18359.54
0302 3.75 40.00
183.60
18543.14

Add GST on "X" (multiplying factor 0.1405) TOTAL 2605.31


Add 15% CPOH on "Y" TOTAL 21148.45
Add Cess @ 1% on "Z" Cost of 375 Cudm Cost of 1.00 cum 3172.27
Say 24320.71
243.21
24563.92
65503.79
65503.80

14.17 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of
the dumping ground, all complete as per direction
of Engineer-in-Charge.
Code Description Unit Quantity Rate Rs. Amount Rs.
0114 Detail of cost for 10 sqm LABOUR day day day 0.53 645.00 341.85
0115 Beldar Coolie Bhisti Sundries TOTAL L.S. 0.08 645.00 51.60
0101 Add 1 % Water charges on "W" TOTAL 0.07 714.00 49.98
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 1.43 2.12 3.03
Add 15% CPOH on "Y" TOTAL 446.46
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 4.46
Say 450.93
63.36
514.28
77.14
591.42
5.91
597.34
59.73
59.75

14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by wei
cement for flat tile bricks on top of mud phaska :
14.18.1 With F.P.S. brick tiles

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)

3.3 Rate as per Item Number 3.3 of SH: Mortars Water proofing cum 0.015 4382.15 65.73
1213 materials kilogram 0.153 35.00 5.36
0115 2% of wt. of cement LABOUR day day day 0.36 645.00 232.20
0124 Coolie L.S. 0.36 714.00 257.04
0101 Mason (brick layer) 2nd class Bhisti 0.36 714.00 257.04
9999 Sundries TOTAL 18.85 2.12 39.96
Add 1 % Water charges on "W" TOTAL 857.33
Add GST on "X" (multiplying factor 0.1405) TOTAL 8.57
Add 15% CPOH on "Y" TOTAL 865.90
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 121.66
Say 987.56
148.13
1135.70
11.36
1147.05
114.71
114.70

14.18.2 With modular brick tiles


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
MATERIAL

Cement mortar 1 : 3 (1 cement : 3 fine sand)


3.3 Rate as per Item Number 3.3 of SH: Mortars cum 0.017 4382.15 74.50
1213 Water proofing materials kilogram 0.173 35.00 6.06
2% of wt. of cement
LABOUR
0115 Coolie day 0.36 645.00 232.20
0124 Mason (brick layer) 2nd class day 0.36 714.00 257.04
0101 Bhisti day 0.36 714.00 257.04
9999 Sundries L.S. 18.85 2.12 39.96
TOTAL 866.79
Add 1 % Water charges on "W" 8.67
TOTAL 875.46
Add GST on "X" (multiplying factor 0.1405) 123.00
TOTAL 998.46
Add 15% CPOH on "Y" 149.77
TOTAL 1148.23
Add Cess @ 1% on "Z" 11.48
Cost of 10.00 sqm 1159.72
Cost of 1.00 sqm 115.97
Say 115.95
14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within
and stacking.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 mtrs of weight 63 kgs
M.S. Flats 40x6mm @ 1.9kg./m = 30x1.9 = 57 kg. (A)
J' hook bolts @ 30cm centre to centre = 101 Nos. x
0.15 m = 15.15 m @ 0.40kg./ m = 6.06kg (B)
Total (A+B) = 63.06 kg Say 63 kg
LABOUR
0103 Blacksmith 2nd class day 0.09 714.00 64.26
0100 Bandhani day 0.06 714.00 42.84
0114 Beldar day 0.16 645.00 103.20
TOTAL 210.30
Add 1 % Water charges on "W" 2.10
TOTAL 212.40
Add GST on "X" (multiplying factor 0.1405) 29.84
TOTAL 242.25
Add 15% CPOH on "Y" 36.34
TOTAL 278.58
Add Cess @ 1% on "Z" 2.79
Cost for 63 kg. 281.37
Cost of 1.00 kg 4.47
Say 4.45
14.20 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approve
manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 20.2 m wind tie
MATERIAL
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 6.80 120.00 816.00
@ 30 cm center to center = 68 Nos
1208 Bitumen washer 100 Nos 0.68 30.00 20.40
1209 G.I. plain washer thick 100 Nos 0.68 35.00 23.80
9977 Carriage of bolts, nuts and washers etc. L.S. 1.17 2.12 2.48
LABOUR
0102 Blacksmith 1st class day 0.34 784.00 266.56
0114 Beldar day 0.34 645.00 219.30
9999 Sundries L.S. 13.91 2.12 29.49
Applying priming coat with ready mixed zink chromate
yellow primer
20.2x2x(0.04+0.006) = 1.86 sqm
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 1.86 55.50 103.23
Painting with ready mixed black antcorrosive
bitumastic paint
13.65.1 Rate as per item No.13.65.1 SH: Finishing sqm 1.86 115.10 214.09
TOTAL 1695.35
Add 1 % Water charges on "W-A" 13.78
TOTAL 1709.13
Add GST on "X-A" (multiplying factor 0.1405) 195.55
TOTAL 1904.68
Add 15% CPOH on "Y-A" 238.10
TOTAL 2142.78
Add Cess @ 1% on "Z-A" 18.25
Cost of 20.2 metres 2161.03
Cost of 1.00 metre 106.98
Say 107.00
14.21 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat
chromate yellow primer of approved brand and manufacturer.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for gate of size 1.52x2.4 m
(weight 11.55 kg)
MATERIAL
M.S. Tee 40x40x6 mm
Top rail = 1.725 m
Bottom rail = 1.570 m
Total = 3.295 m say 3.30 m @ 3.5 kg/m
= 11.55 kg
Add 10% wastage = 1.155 kg
Total = 12.705 kg = 0.1270 q say 0.13 q
1007 Structurals such as tees,angles channels and R.S.
joists quintal 0.13 4950.00 643.50
2205 Carriage of Steel tonne 0.013 145.72 1.89
Taking out collapsible gate including frame
15.12.2 (Rate as per item no 15.12.2 of SH Dismantling and
Demolishing) each 1.00 414.55 414.55
Refixing of collapsible gate including mending good
the demaged floor, wall etc.frame
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size)
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.03 8843.45 265.30
3.6 Cement mortar 1 : 6 (1 cement : 6 fine sand) (Rate as
per item No 3.6) cum 0.01 3044.30 30.44
9999 Cement concrete 1:2:4 filled in chase cut L.S. 24.18 2.12 51.26
9999 Disposal of mulba L.S. 1.82 2.12 3.86
Priming coat on Tees 0.16x3.3 = 0.53 sqm
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 0.53 55.50 29.42
LABOUR
Labour for fixing the gate
0155 Mason (average) day 0.50 749.00 374.50
0114 Beldar day 0.75 645.00 483.75
9999 Sundries L.S. 2.60 2.12 5.51
TOTAL 2303.99
Add 1 % Water charges on "W-A" 15.95
TOTAL 2319.94
Add GST on "X-A" (multiplying factor 0.1405) 226.30
TOTAL 2546.23
Add 15% CPOH on "Y-A" 275.54
TOTAL 2821.78
Add Cess @ 1% on "Z-A" 21.13
Cost of 11.55 kg 2842.90
Cost of 1.00 kg 246.14
Say 246.15
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps
bolts/welding and erection etc. complete.
14.22.1 Wheel 50 mm dia and below

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 nos wheels of 40 mm dia.
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000= 3.94 kg
Weight of 10 nos clamps 6 mm thick =10x lenth of
clamp =10x0.17m @ 1.90kg/m =3.23 kg
Weight of 10 nos 10 mm dia. Bolts, 10 cm long
10x0.10m = 1m @ 0.60 kg/m = 0.60 kg. Total = 7.70
kg say 8 kg
Labour for dismantling :
0103 Blacksmith 2nd class day 0.01 714.00 7.14
0100 Bandhani day 0.01 714.00 7.14
0114 Beldar day 0.02 645.00 12.90
9999 Sundries L.S. 0.39 2.12 0.83
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide each 10.00 62.00 620.00
10 nos clamps out of M.S. flat 40x6 mm, 170 mm long
= 10x0.17m = 1.70m @ 1.9 kg/m = 3.23 kg
Add 5% wastage = 0.16 kg
Total = 3.39 kg say 3.50 kg
1008 Flats upto 10 mm in thickness quintal 0.035 4850.00 169.75
M.S. bolt/pin 10 mm dia 10 cm long 10 Nos
10x0.06 = 0.6 kg = 0.006 q
1034 Bolts and nuts upto 300 mm in length quintal 0.006 5200.00 31.20
1215 Welding by electric plant cm 80.00 2.00 160.00
length = 10x(2x4) = 80cm
LABOUR
Labour for cutting, assembling and errection charges
0102 Blacksmith 1st class day 0.03 784.00 23.52
0100 Bandhani day 0.02 714.00 14.28
0114 Beldar day 0.11 645.00 70.95
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqm
on Tees 0.16x3.3 = 0.53 sqm
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 0.165 55.50 9.16
9999 Sundries L.S. 1.69 2.12 3.58
TOTAL 1130.45
Add 1 % Water charges on "W-A" 11.21
TOTAL 1141.66
Add GST on "X-A" (multiplying factor 0.1405) 159.12
TOTAL 1300.78
Add 15% CPOH on "Y-A" 193.74
TOTAL 1494.52
Add Cess @ 1% on "Z-A" 14.85
Cost of 10 nos wheels 1509.37
Cost per wheel 150.94
Say 150.95
14.22.2 Wheel above 50 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 nos wheels
Considering average wheel dia =75 mm
Width of wheel = 40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Lenth of one clamp :
2x(0.04+0.0375+0.02)+0.05 =0.195+0.05=0.245m say
0.25m
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000= 13.87 kg
Weight of 10 nos clamps 8 mm thick =10x0.25 m @
3.8kg/m = 9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm long
10x0.10 m @ 1.60 kg/m = 1.60 kg
Total = 24.97 kg say 25 kg
Labour for dismantling :
0103 Blacksmith 2nd class day 0.04 714.00 28.56
0100 Bandhani day 0.03 714.00 21.42
0114 Beldar day 0.06 645.00 38.70
9999 Sundries L.S. 1.04 2.12 2.20
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide each 10.00 62.00 620.00
10 nos clamps out of M.S. flat 60x8 mm = 10x0.25 m
@ 3.8 kg/m = 9.5 kg
Add 5% wastage = 0.48 kg
Total = 9.98 kg say 10 kg
1008 Flats upto 10 mm in thickness quintal 0.10 4850.00 485.00
M.S. bolt/pin 16 mm dia 10 cm long 10 Nos
10x0.16= 1.6 kg = 0.016 q
1034 Bolts and nuts upto 300 mm in length quintal 0.016 5200.00 83.20
1215 Welding by electric plant cm 120.00 2.00 240.00
length = 10x(2x6)
LABOUR
Labour for cutting, assembling and errection charges
0102 Blacksmith 1st class day 0.10 784.00 78.40
0100 Bandhani day 0.05 714.00 35.70
0114 Beldar day 0.36 645.00 232.20
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqm
on Tees 0.16x3.3 = 0.53 sqm
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 0.34 55.50 18.87
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 1895.55
Add 1 % Water charges on "W-A" 18.77
TOTAL 1914.32
Add GST on "X-A" (multiplying factor 0.1405) 266.31
TOTAL 2180.63
Add 15% CPOH on "Y-A" 324.26
TOTAL 2504.90
Add Cess @ 1% on "Z-A" 24.86
Cost of 10 nos wheels 2529.76
Cost per wheel 252.98
Say 253.00
14.23 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details for 10.91 kilolitre
Pumping hours 3 hrs. or 0.375 days

0011 Hire charges of Pumpset of capacity 4000 litres/hour. day day 0.375 700.00 262.50
0114 Beldar 2.00 645.00 1290.00
for clearing slush TOTAL 1552.50
Add 1 % Water charges on "W" TOTAL 15.53
Add GST on "X" (multiplying factor 0.1405) TOTAL 1568.03
Add 15% CPOH on "Y" TOTAL 220.31
Add Cess @ 1% on "Z" Cost of 10.91 kilolitre Cost of 1 kilolitre 1788.33
Say 268.25
2056.58
20.57
2077.15
190.39
190.40

14.24 Mud mortar made with local clay good earth.

Code Description Unit Quantity Rate Rs. Amount Rs.


0811 Detail of cost for 1 cum MATERIAL cum 1.08 165.00 178.20
0114 Mud (dry) LABOUR day day L.S. 0.63 645.00 406.35
0101 Beldar Bhisti Sundries TOTAL 0.315 714.00 224.91
9999 Cost of 1 cum 6.45 2.12 13.67
Say 823.13
823.13
823.15

14.25 Brick work with common burnt clay bricks of class designation 7.5 in mud mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


2602 Details of cost for 1 cum. MATERIAL 1000 Nos 0.494 4590.00 2267.46
3.18 Common burnt clay F.P.S. (non modular) bricks class cum 1000 Nos 0.25 823.15 205.79
2201 designation 7.5 L.S. 0.494 437.15 215.95
9999 Mud mortar day day day 2.73 2.12 5.79
0123 Rate as per Item Number 3.18 of SH: Mortars Carriage of day 0.36 784.00 282.24
0124 Bricks 0.36 714.00 257.04
0115 Sundries LABOUR 1.37 645.00 883.65
0101 Mason (brick layer) 1st class Mason (brick layer) 2nd class 0.2 714.00 142.80
Coolie 4260.72
Bhisti TOTAL 42.61
Add 1 % Water charges on "W" TOTAL 4303.32
Add GST on "X" (multiplying factor 0.1405) TOTAL 604.62
Add 15% CPOH on "Y" TOTAL 4907.94
Add Cess @ 1% on "Z" Cost of 1 Cum. 736.19
Say 5644.13
56.44
5700.57
5700.55

14.26 Providing and fixing 25 mm thick shutters for cup board etc. :
14.26.1 Panelled or panelled & glazed shutters :
14.26.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutter of cup-board 200x108cm =
2.16 sqm. MATERIAL Styles
4x200x8.0x2.5cm = 0.016 cum+ Rails
Top rail
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rails 2x110.5x8.0x2.5 cm = 0.0044 cum
Panels
2x48x41x1.6cm = 0.006cum+ Sash bars
2x114x3.8x2.5cm = 0.0022cum+ 6x48x3.8x2.5cm = 0.003
cum+ Beading
16x92x1.4x1.2cm = 0.002cum Total = 0.0358 cum
Add for wastage @ 10% = 0.00336 cum. Grand Total = 0.0394
cum = 39.40 cudm say 39 cudm
Superior class teak wood such as Dandeli, Balarshah or
Malabar in planks
Carriage of Timber
Float glass sheet of nominal thickness 4 mm (weight not less
than 10kg/sqm). 4290.00
Fittings- 7.49
Nickel plated mild steel piono hinges 1 mm thick 25 mm wide 305.91
Bright finished or black enamelled mild steel screws 25 mm 156.00
LABOUR 48.00
Carpenter 1st class Glazier 1881.60
1186 3.90 1100.00
Beldar Sundries TOTAL 128.52
2204 0.04 187.35
Add 1 % Water charges on "W" TOTAL 10 cudm cum 496.65
2406 0.99 309.00
Add GST on "X" (multiplying factor 0.1405) TOTAL sqm 85.71
0608 4.00 39.00
Add 15% CPOH on "Y" TOTAL metre 7399.89
0639 1.20 40.00
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 100 Nos 74.00
0111 2.40 784.00
Cost of 1 sqm. day day day 7473.88
0119 0.18 714.00
Say L.S. 1050.08
0114 0.77 645.00
8523.97
9999 40.43 2.12
1278.59
9802.56
98.03
9900.59
4583.60
4583.60

14.26.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutters of a cup-board (half glazed and half
panelled) 200x108cm= 2.16 sqm.
MATERIAL
Styles
4x200x8.0x2.5cm = 0.016 cum+ Rails
Top rail
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail 2x110.5x8.0x2.5cm = 0.0044 cum.
Panels
2x48x41x1.6cm = 0.006cum+
1188 Sash bars 10 cudm cum 3.90 850.00 3315.00
2204 2x114x3.8x2.5cm = 0.0022 cum+ 6x48x3.8x2.5cm = 0.003 sqm 0.04 187.35 7.49
2406 cum+ Beading metre 0.99 309.00 305.91
0608 16x92x1.4x1.2cm = 0.002cum Total = 0.0358 100 Nos 4.00 39.00 156.00
0639 Add for wastage @ 10% = 0.0036 cum. Grand Total = 0.0394 day day day 1.20 40.00 48.00
0111 cum = 39.40 cudm say 39 cudm L.S. 2.40 784.00 1881.60
0119 First class teak wood in planks Carriage of Timber 0.18 714.00 128.52
0114 Float glass sheet of nominal thickness 4 mm (weight not less 0.77 645.00 496.65
9999 than 10kg/sqm). 40.43 2.12 85.71
Fittings 6424.89
Nickel plated mild steel piono hinges 1 mm thick 25 mm wide 64.25
Bright finished or black enamelled mild steel screws 25 mm 6489.13
LABOUR 911.72
Carpenter 1st class Glazier 7400.86
Beldar Sundries TOTAL 1110.13
Add 1 % Water charges on "W" TOTAL 8510.99
Add GST on "X" (multiplying factor 0.1405) TOTAL 85.11
Add 15% CPOH on "Y" TOTAL 8596.10
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 3979.67
Cost of 1 sqm. 3979.65
Say

14.26.2 Glazed shutters :


14.26.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutter of cup-board 200x108cm =
2.16 sqm. MATERIAL
(i) Superior class teak wood
Styles : 4x200x9.5x2.5 cm = 0.019 cum Rails
Top & intermediate rails 2x110.5x9.5x2.5 cm = 0.005 cum Lock
and bottom rails 2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum.
Add for wastage @ 10% = 0.0038 cum. Grand Total = 0.0418
cum = 42 cudm
Superior class teak wood such as Dandeli,Balarshah or
Malabar in planks
Float glass sheet of nominal thickness 4 mm (weight not less
1186 than 10kg/sqm).
2406 Nickel plated mild steel piono hinges 1 mm thick 25 mm wide
0608 75x45x3.2 mm
0639 Bright finished or black enamelled mild steel screws 25 mm

4.20 1100.00 4620.00


10 cudm sqm 1.27 309.00 392.43
metre 4.00 39.00 156.00
100 Nos 1.20 40.00 48.00

0597 Bright finished or black enamelled mild steel butt 10 Nos 0.20 49.00 9.80
0640 hinges50x37x1.50 mm 100 Nos cum 0.08 35.00 2.80
2204 Bright finished or black enamelled mild steel screws 20 mm day day day 0.042 187.35 7.87
0156 Carriage of Timber LABOUR L.S. 1.83 749.00 1370.67
0119 Carpenter (average) Glazier 0.23 714.00 164.22
0114 Beldar Sundries TOTAL 0.77 645.00 496.65
9999 Add 1 % Water charges on "W" TOTAL 40.43 2.12 85.71
Add GST on "X" (multiplying factor 0.1405) TOTAL 7354.15
Add 15% CPOH on "Y" TOTAL 73.54
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 7427.69
Cost of 1 sqm. 1043.59
Say 8471.28
1270.69
9741.97
97.42
9839.39
4555.28
4555.30

14.26.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutter of cup-board 200x108cm =
2.16 sqm. MATERIAL
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum Rails
Top & intermediate rails 2x110.5x9.5x2.5 cm = 0.005 cum Lock
and bottom rails 2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum.
Add for wastage @ 10% = 0.0038 cum. Grand Total = 0.0418
cum = 42 cudm First class teak wood in planks
Float glass sheet of nominal thickness 4 mm (weight not less
than 10kg/sqm).
Nickel plated mild steel piono hinges 1 mm thick 25 mm wide 3570.00
75x45x3.2 mm 392.43
Bright finished or black enamelled mild steel screws 25 mm 156.00
1188 Bright finished or black enamelled mild steel butt 4.20 850.00 48.00
2406 hinges50x37x1.50 mm 1.27 309.00 9.80
0608 Bright finished or black enamelled mild steel screws 20 mm 10 cudm sqm 4.00 39.00 2.80
0639 Carriage of Timber LABOUR metre 1.20 40.00 7.87
0597 Carpenter (average) Glazier 100 Nos 0.20 49.00 1370.67
0640 Beldar Sundries TOTAL 10 Nos 0.08 35.00 164.22
2204 Add 1 % Water charges on "W" TOTAL 100 Nos cum 0.042 187.35 496.65
0156 Add GST on "X" (multiplying factor 0.1405) TOTAL day day day 1.83 749.00 85.71
0119 Add 15% CPOH on "Y" L.S. 0.23 714.00 6304.15
0114 0.77 645.00 63.04
9999 40.43 2.12 6367.19
894.59
7261.78
1089.27

TOTAL 8351.05
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 83.51
Cost of 1 sqm. 8434.56
Say 3904.89
3904.90

14.27 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with n
screws 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with :
14.27.1 Second class teak wood

Code Description Unit Quantity Rate Rs. Amount Rs.


1190 Details of cost of a jaffri shutter 176x86 cm = 1.51 sqm 10 cudm cum 1.80 791.00 1423.80
2204 MATERIAL sqm 10 Nos 0.018 187.35 3.37
9.41.1 Teak wood 2nd class 10 Nos 1.51 2622.20 3959.52
0595 Styles 2x176x7.5x3.5 cm = 0.0092 cum Rails 3x86x7.5x3.5 = 100 Nos 0.60 80.00 48.00
0597 0.0068 cum 100 Nos 0.20 49.00 9.80
0637 Total 0.0160 cum day 0.48 60.00 28.80
0640 Add wastage @ 10 % =0.0016 cum Total = 0.0176 cum Say 18 0.08 35.00 2.80
0112 cudm Second class teak wood in planks Carriage of Timber 0.30 714.00 214.20
Palain Jaffri work 5690.29
Rate as per Item Number 9.41.1 of SH:Wood and PVC work 17.31
Bright finished or black enamelled mild steel butt hinges 5707.60
100x58x1.90 mm 245.61
Bright finished or black enamelled mild steel butt 5953.21
hinges50x37x1.50 mm 299.05
Bright finished or black enamelled mild steel screws 40 mm 6252.26
Bright finished or black enamelled mild steel screws 20 mm 22.93
LABOUR 6275.19
For making frame and fixing fitting Carpenter 2nd class 4155.75
TOTAL 4155.75
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 1.51 sqm.
Cost of 1 sqm.
Say

14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and w
plugs etc. wherever necessary complete.
14.28.1 20 mm diameter.

Code Description Unit Quantity Rate Rs. Amount Rs.


0444 Detail of cost for 2 metre long MATERIAL metre each 2.00 140.00 280.00
0446 Brass curtain rod 20 mm dia 1.25 mm thick Brass brackets L.S. 2.00 45.00 90.00
9999 (curtain rods) 20 mm Screws L.S. 2.73 2.12 5.79
9977 Carriage each L.S. 1.56 2.12 3.31
8.23 Wooden plugs including cutting brick work and fixing in cement 2.00 35.50 71.00
9999 mortar 2.73 2.12 5.79
Rate as per item no 9.32 of SH : Wood work
LABOUR

9999 Sundries TOTAL L.S. 1.56 2.12 3.31


Add 1 % Water charges on "W-A" TOTAL 459.19
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 3.88
Add 15% CPOH on "Y-A" TOTAL 463.07
Add Cess @ 1% on "Z-A" Cost of 2 metres 55.09
Cost of 1 metre 518.16
Say 67.07
585.23
5.14
590.37
295.19
295.20
Add Cess @ 1% on "Z-A" Cost of 2 metres 55.09
Cost of 1 metre 518.16
Say 67.07
585.23
5.14
590.37
295.19
295.20

14.28.2 25 mm diameter.

Code Description Unit Quantity Rate Rs. Amount Rs.


0445 Detail of cost for 2 metre long MATERIAL metre each 2.00 190.00 380.00
0446 Brass curtain rod 25 mm dia 1.25 mm thick Brass brackets L.S. 2.00 45.00 90.00
9999 (curtain rods) 20 mm Screws L.S. 2.73 2.12 5.79
9977 Carriage each L.S. 1.56 2.12 3.31
8.23 Wooden plugs including cutting brick work and fixing in cement L.S. 2.00 35.50 71.00
9999 mortar 2.73 2.12 5.79
9999 Rate as per item no 9.32 of SH : Wood work LABOUR 1.56 2.12 3.31
Sundries TOTAL 559.19
Add 1 % Water charges on "W-A" TOTAL 4.88
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 564.07
Add 15% CPOH on "Y-A" TOTAL 69.28
Add Cess @ 1% on "Z-A" Cost of 2 metres 633.35
Cost of 1 metre 84.35
Say 717.70
6.47
724.17
362.08
362.10

14.29 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clere
windows.

Code Description Unit Quantity Rate Rs. Amount Rs.


1003 Details of cost for 33.67 kg quintal 0.307 4750.00 1458.25
1008 Details of cost for window -140x110cm MATERIAL quintal tonne 0.063 4850.00 305.55
2205 M.S. bar 16 mm dia 13x136 cm = 17.68 m @ 1.58 kg/m = 27.93 L.S. 0.037 145.72 5.39
9999 kg day day day 26.91 2.12 57.05
0103 Add for wastage @ 10% =2.79 kg Total = 30.72 kg or 0.307 q 0.35 714.00 249.90
0112 Mild steel round bar above 12 mm dia 0.20 714.00 142.80
0114 M.S. flat 40x6mm 2x96cm = 192cm+ 1x110cm = 110cm 0.45 645.00 290.25
= 302cm+ 2509.19
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg Say 0.063 q
Flats upto 10 mm in thickness Carriage of Steel
(0.307+0.063 = 0.37 q = 0.037 t)
Sundries LABOUR
Blacksmith 2nd class Carpenter 2nd class Beldar
TOTAL
Add 1 % Water charges on "W" TOTAL 25.09
Add GST on "X" (multiplying factor 0.1405) TOTAL 2534.28
Add 15% CPOH on "Y" TOTAL 356.07
Add Cess @ 1% on "Z" 2890.35
Cost of 33.67 kg.(5.74+27.93=33.67kg) 433.55
Cost of 1 kg. Say 3323.90
33.24
3357.14
99.71
99.70

14.30 Providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc.
with :
14.30.1 Sal wood

Code Description Unit Quantity Rate Rs. Amount Rs.


1199 Details of cost for 300cudm. MATERIAL 10 cudm cum 30.60 600.00 18360.00
2204 Sal wood day day day 0.306 187.35 57.33
0112 10x0.1mx0.1mx3.0m = 0.30 cum. Or = 300 cudm Add wastage sqm L.S. 0.70 714.00 499.80
0114 @ 2% = 6.00 cudm. 1.45 645.00 935.25
0100 Total = 306 cudm. Sal wood in scantling Carriage of Timber 0.70 714.00 499.80
13.57.1 LABOUR 0.80 47.10 37.68
9999 Carpenter 2nd class Beldar 26.91 2.12 57.05
Bandhani 20446.91
Priming coat (Wood preservative) 204.09
Rate as per item no 13.57.1 SH : Finishing Sundries 20651.00
TOTAL 2896.17
Add 1 % Water charges on "W-A" TOTAL 23547.17
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 3526.42
Add 15% CPOH on "Y-A" TOTAL 27073.60
Add Cess @ 1% on "Z-A" Cost of 300 cudm. 270.36
Cost of 1 cum. 27343.96
Say 91146.53
91146.55

14.30.2 Hollock wood

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 300cudm. MATERIAL
Hollock wood in scantling
10x0.1mx0.1mx3.0m = 0.30 cum. Or = 300 cudm Add wastage
@ 2% = 6.00 cudm.
Total = 306 cudm. Hollock wood in scantling Carriage of Timber
LABOUR
Carpenter 2nd class Beldar 10924.20
Bandhani 57.33
Priming coat (Wood preservative) 499.80
2466 30.60 357.00
Rate as per item no 13.57.1 SH : Finishing Sundries 935.25
2204 0.306 187.35
TOTAL 499.80
0112 10 cudm cum 0.70 714.00
Add 1 % Water charges on "W-A" TOTAL 37.68
0114 day day day 1.45 645.00
Add GST on "X-A" (multiplying factor 0.1405) 57.05
0100 sqm L.S. 0.70 714.00
TOTAL 13011.11
13.57.1 0.80 47.10
129.73
9999 26.91 2.12
13140.84
1840.99
14981.84

Add 15% CPOH on "Y-A" TOTAL 2241.62


Add Cess @ 1% on "Z-A" Cost of 300 cudm. 17223.46
Cost of 1 cum. 171.86
Say 17395.32
57984.40
57984.40

14.31 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :
14.31.1 150 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


0389 Details of cost for 10 nos. MATERIAL each 100 Nos 10.00 425.00 4250.00
0449 Brass single acting spring hinges 150 mm Brass screws 50 mm L.S. 0.80 220.00 176.00
9977 Carriage of materials LABOUR day day 3.64 2.12 7.72
0111 Carpenter 1st class Beldar 0.40 784.00 313.60
0114 TOTAL 0.20 645.00 129.00
Add 1 % Water charges on "W" TOTAL 4876.32
Add GST on "X" (multiplying factor 0.1405) TOTAL 48.76
Add 15% CPOH on "Y" TOTAL 4925.08
Add Cess @ 1% on "Z" Cost of 10 hinges 691.97
Cost of each 5617.05
Say 842.56
6459.61
64.60
6524.21
652.42
652.40

14.31.2 125 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


0390 Details of cost for 10 nos. MATERIAL each 100 Nos 10.00 285.00 2850.00
0449 Brass single acting spring hinges 125 mm Brass screws 50 mm L.S. 0.80 220.00 176.00
9977 Carriage of materials LABOUR day day 3.64 2.12 7.72
0111 Carpenter 1st class Beldar 0.40 784.00 313.60
0114 TOTAL 0.20 645.00 129.00
Add 1 % Water charges on "W" TOTAL 3476.32
Add GST on "X" (multiplying factor 0.1405) TOTAL 34.76
Add 15% CPOH on "Y" TOTAL 3511.08
Add Cess @ 1% on "Z" Cost of 10 hinges 493.31
Cost of each 4004.39
Say 600.66
4605.04
46.05
4651.10
465.11
465.10

14.31.3 100 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


0391 Details of cost for 10 nos. MATERIAL each 100 Nos 10.00 250.00 2500.00
0450 Brass single acting spring hinges 100 mm Brass screws 40 mm L.S. 0.80 170.00 136.00
9977 Carriage of materials LABOUR day day 3.64 2.12 7.72
0111 Carpenter 1st class Beldar 0.40 784.00 313.60
0114 TOTAL 0.20 645.00 129.00
3086.32

Add 1 % Water charges on "W" 30.86


TOTAL 3117.18
Add GST on "X" (multiplying factor 0.1405) 437.96
TOTAL 3555.14
Add 15% CPOH on "Y" 533.27
TOTAL 4088.42
Add Cess @ 1% on "Z" 40.88
Cost of 10 hinges 4129.30
Cost of each 412.93
Say 412.95
14.32 Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete :
14.32.1 150 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0392 Brass double acting spring hinges 150 mm each 10.00 480.00 4800.00
0449 Brass screws 50 mm 100 Nos 0.80 220.00 176.00
9977 Carriage of materials L.S. 3.64 2.12 7.72
LABOUR
0111 Carpenter 1st class day 0.40 784.00 313.60
0114 Beldar day 0.20 645.00 129.00
TOTAL 5426.32
Add 1 % Water charges on "W" 54.26
TOTAL 5480.58
Add GST on "X" (multiplying factor 0.1405) 770.02
TOTAL 6250.60
Add 15% CPOH on "Y" 937.59
TOTAL 7188.19
Add Cess @ 1% on "Z" 71.88
Cost of 10 hinges 7260.07
Cost of each 726.01
Say 726.00

14.32.2 125 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0393 Brass double acting spring hinges 125 mm each 10.00 400.00 4000.00
0449 Brass screws 50 mm 100 Nos 0.80 220.00 176.00
9977 Carriage of materials L.S. 3.64 2.12 7.72
LABOUR
0111 Carpenter 1st class day 0.40 784.00 313.60
0114 Beldar day 0.20 645.00 129.00
TOTAL 4626.32
Add 1 % Water charges on "W" 46.26
TOTAL 4672.58
Add GST on "X" (multiplying factor 0.1405) 656.50
TOTAL 5329.08
Add 15% CPOH on "Y" 799.36
TOTAL 6128.44
Add Cess @ 1% on "Z" 61.28
Cost of 10 hinges 6189.72
Cost of each 618.97
Say 618.95
14.32.3 100 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos.
MATERIAL
0394 Brass double acting spring hinges 100 mm each 10.00 390.00 3900.00
0450 Brass screws 40 mm 100 Nos 0.80 170.00 136.00
9977 Carriage of materials L.S. 3.64 2.12 7.72

LABOUR
0111 Carpenter 1st class day 0.40 784.00 313.60
0114 Beldar day 0.20 645.00 129.00
TOTAL 4486.32
Add 1 % Water charges on "W" 44.86
TOTAL 4531.18
Add GST on "X" (multiplying factor 0.1405) 636.63
TOTAL 5167.81
Add 15% CPOH on "Y" 775.17
TOTAL 5942.98
Add Cess @ 1% on "Z" 59.43
Cost of 10 hinges 6002.41
Cost of each 600.24
Say 600.25
14.33 Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete
:

14.33.1 250 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0404 Brass flush bolt 250 mm each 10.00 150.00 1500.00
0452 Brass screws 25 mm 100 Nos 0.60 100.00 60.00
9977 Carriage of materials L.S. 3.64 2.12 7.72
LABOUR
0111 Carpenter 1st class Day 0.20 784.00 156.80
TOTAL 1724.52
Add 1 % Water charges on "W" 17.25
TOTAL 1741.76
Add GST on "X" (multiplying factor 0.1405) 244.72
TOTAL 1986.48
Add 15% CPOH on "Y" 297.97
TOTAL 2284.45
Add Cess @ 1% on "Z" 22.84
Cost of 10 hinges 2307.30
Cost of each 230.73
Say 230.75

14.33.2 150 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0405 Brass flush bolt 150 mm each 10.00 130.00 1300.00
0452 Brass screws 25 mm 100 Nos 0.60 100.00 60.00
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0111 Carpenter 1st class day 0.17 784.00 133.28
TOTAL 1499.07
Add 1 % Water charges on "W" 14.99
TOTAL 1514.06
Add GST on "X" (multiplying factor 0.1405) 212.73
TOTAL 1726.78
Add 15% CPOH on "Y" 259.02
TOTAL 1985.80
Add Cess @ 1% on "Z" 19.86
Cost of 10 hinges 2005.66
Cost of each 200.57
Say 200.55

14.33.3 100 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos. MATERIAL
Brass flush bolt 100 mm

0406 each 10.00 90.00 900.00

0452 Brass screws 25 mm 100 Nos 0.60 100.00 60.00


9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0111 Carpenter 1st class day 0.17 784.00 133.28
TOTAL 1099.07
Add 1 % Water charges on "W" 10.99
TOTAL 1110.06
Add GST on "X" (multiplying factor 0.1405) 155.96
TOTAL 1266.02
Add 15% CPOH on "Y" 189.90
TOTAL 1455.92
Add Cess @ 1% on "Z" 14.56
Cost of 10 hinges 1470.48
Cost of each 147.05
Say 147.05
14.34 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to
shutter thickness complete

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0417 Brass 150 mm floor door stopper (0.357kg) each 10.00 160.00 1600.00
0450 Brass screws 40 mm 100 Nos 0.40 170.00 68.00
9977 Carriage of material L.S. 2.73 2.12 5.79
LABOUR
0111 Carpenter 1st class day 0.07 784.00 54.88
9999 Sundries (wooden plugs including fixing
in the floor) L.S. 6.37 2.12 13.50
TOTAL 1742.17
Add 1 % Water charges on "W" 17.42
TOTAL 1759.59
Add GST on "X" (multiplying factor 0.1405) 247.22
TOTAL 2006.82
Add 15% CPOH on "Y" 301.02
TOTAL 2307.84
Add Cess @ 1% on "Z" 23.08
Cost of 10 Nos 2330.92
Cost of each 233.09
Say 233.10

14.35 Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1 300 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 1.00 600.00 600.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.06 784.00 47.04
TOTAL 648.97
Add 1 % Water charges on "W" 6.49
TOTAL 655.46
Add GST on "X" (multiplying factor 0.1405) 92.09
TOTAL 747.55
Add 15% CPOH on "Y" 112.13
TOTAL 859.68
Add Cess @ 1% on "Z" 8.60
Cost of 10 Nos 868.28
Cost of each 86.83
Say 86.85

14.35.2 250 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos.
MATERIAL
0419 Brass hard drawn hooks and eyes 250 mm 10 Nos 1.00 574.00 574.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.06 784.00 47.04
TOTAL 622.97
Add 1 % Water charges on "W" 6.23
TOTAL 629.20
Add GST on "X" (multiplying factor 0.1405) 88.40
TOTAL 717.60
Add 15% CPOH on "Y" 107.64
TOTAL 825.24
Add Cess @ 1% on "Z" 8.25
Cost of 10 hooks and eyes 833.49
Cost of 1 hook and eye 83.35
Say 83.35

14.35.3 200 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0420 Brass hard drawn hooks and eyes 200 mm 10 Nos 1.00 510.00 510.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.06 784.00 47.04
TOTAL 558.97
Add 1 % Water charges on "W" 5.59
TOTAL 564.56
Add GST on "X" (multiplying factor 0.1405) 79.32
TOTAL 643.88
Add 15% CPOH on "Y" 96.58
TOTAL 740.46
Add Cess @ 1% on "Z" 7.40
Cost of 10 Nos 747.87
Cost of each 74.79
Say 74.80
14.35.4 150 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0421 Brass hard drawn hooks and eyes 150 mm 10 Nos 1.00 400.00 400.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.06 784.00 47.04
TOTAL 448.97
Add 1 % Water charges on "W" 4.49
TOTAL 453.46
Add GST on "X" (multiplying factor 0.1405) 63.71
TOTAL 517.17
Add 15% CPOH on "Y" 77.58
TOTAL 594.75
Add Cess @ 1% on "Z" 5.95
Cost of 10 Nos 600.69
Cost of each 60.07
Say 60.05
14.35.5 100 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos.
MATERIAL
0422 Brass hard drawn hooks and eyes 100 mm 10 Nos 1.00 345.00 345.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR

0111 Carpenter 1st class day 0.06 784.00 47.04


TOTAL 393.97
Add 1 % Water charges on "W" 3.94
TOTAL 397.91
Add GST on "X" (multiplying factor 0.1405) 55.91
TOTAL 453.82
Add 15% CPOH on "Y" 68.07
TOTAL 521.89
Add Cess @ 1% on "Z" 5.22
Cost of 10 Nos 527.11
Cost of each 52.71
Say 52.70
14.36 Providing and fixing bright finished brass fan light pivot with necessary brass screws etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0429 Brass fanlight pivot 10 Nos 1.00 168.00 168.00
0450 Brass screws 40 mm 100 Nos 0.40 170.00 68.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.08 784.00 62.72
TOTAL 300.65
Add 1 % Water charges on "W" 3.01
TOTAL 303.66
Add GST on "X" (multiplying factor 0.1405) 42.66
TOTAL 346.32
Add 15% CPOH on "Y" 51.95
TOTAL 398.27
Add Cess @ 1% on "Z" 3.98
Cost of 10 Nos 402.25
Cost of each 40.22
Say 40.20
14.37 Providing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary brass screws etc

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0430 Brass chain with hook for fan light catch each 10.00 36.00 360.00
0452 Brass screws 25 mm 100 Nos 0.40 100.00 40.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.10 784.00 78.40
TOTAL 480.33
Add 1 % Water charges on "W" 4.80
TOTAL 485.13
Add GST on "X" (multiplying factor 0.1405) 68.16
TOTAL 553.29
Add 15% CPOH on "Y" 82.99
TOTAL 636.29
Add Cess @ 1% on "Z" 6.36
Cost of 10 Nos 642.65
Cost of each 64.27
Say 64.25

14.38 Providing and fixing bright finished brass quadrant stay 300 mm long with necessary brass screws etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL

0427 Brass quadrant stays 300 mm each 10.00 110.00 1100.00


0452 Brass screws 25 mm 100 Nos 0.40 100.00 40.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.10 784.00 78.40
TOTAL 1220.33
Add 1 % Water charges on "W" 12.20
TOTAL 1232.53
Add GST on "X" (multiplying factor 0.1405) 173.17
TOTAL 1405.70
Add 15% CPOH on "Y" 210.86
TOTAL 1616.56
Add Cess @ 1% on "Z" 16.17
Cost of 10 quadrant stayes 1632.72
Cost of each 163.27
Say 163.25

14.39 Providing and fixing bright finished brass helical door spring (superior quality).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0442 Brass helical spring 150 mm each 10.00 290.00 2900.00
0449 Brass screws 50 mm 100 Nos 0.40 220.00 88.00
0452 Brass screws 25 mm 100 Nos 0.20 100.00 20.00
9977 Carriage of material L.S. 3.84 2.12 8.14
LABOUR
0111 Carpenter 1st class day 0.40 784.00 313.60
0114 Beldar day 0.20 645.00 129.00
TOTAL 3458.74
Add 1 % Water charges on "W" 34.59
TOTAL 3493.33
Add GST on "X" (multiplying factor 0.1405) 490.81
TOTAL 3984.14
Add 15% CPOH on "Y" 597.62
TOTAL 4581.76
Add Cess @ 1% on "Z" 45.82
Cost of 10 Nos 4627.58
Cost of each 462.76
Say 462.75
14.40 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.
14.40.1 125x70x4 mm (ordinary type)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0525 Chromium plated Brass butt hinges (light/ordinary)
type 125x70x4 mm 10 Nos 1.00 805.00 805.00
0585 Chromium plated Brass screws 50 mm 100 Nos 1.00 300.00 300.00
9977 Carriage of material L.S. 3.64 2.12 7.72
LABOUR
0111 Carpenter 1st class day 0.14 784.00 109.76
0114 Beldar day 0.10 645.00 64.50
TOTAL 1286.98
Add 1 % Water charges on "W" 12.87
TOTAL 1299.85
Add GST on "X" (multiplying factor 0.1405) 182.63
TOTAL 1482.48
Add 15% CPOH on "Y" 222.37
TOTAL 1704.85
Add Cess @ 1% on "Z" 17.05
Cost of 10 nos. 1721.89
Cost of each 172.19
Say 172.20

14.40.2 100x70x4 mm (ordinary type)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0526 Chromium plated Brass butt hinges (light/ordinary)
type 100x70x4 mm 10 Nos 1.00 690.00 690.00
0586 Chromium plated Brass screws 40 mm 100 Nos 0.80 290.00 232.00
9977 Carriage of material L.S. 3.64 2.12 7.72
LABOUR
0111 Carpenter 1st class day 0.14 784.00 109.76
0114 Beldar day 0.10 645.00 64.50
TOTAL 1103.98
Add 1 % Water charges on "W" 11.04
TOTAL 1115.02
Add GST on "X" (multiplying factor 0.1405) 156.66
TOTAL 1271.68
Add 15% CPOH on "Y" 190.75
TOTAL 1462.43
Add Cess @ 1% on "Z" 14.62
Cost of 10 nos. 1477.05
Cost of each 147.71
Say 147.70

14.40.3 75x65x4 mm (heavy type)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 nos.
MATERIAL
0524 Chromium plated Brass butt hinges (heavy) type
75x65x4 .0 mm (200gms) 10 Nos 1.00 905.00 905.00
0587 Chromium plated Brass screws 30 mm 100 Nos 0.60 240.00 144.00
9977 Carriage of material L.S. 1.82 2.12 3.86
LABOUR
0111 Carpenter 1st class day 0.14 784.00 109.76
0114 Beldar day 0.10 645.00 64.50
TOTAL 1227.12
Add 1 % Water charges on "W" 12.27
TOTAL 1239.39
Add GST on "X" (multiplying factor 0.1405) 174.13
TOTAL 1413.52
Add 15% CPOH on "Y" 212.03
TOTAL 1625.55
Add Cess @ 1% on "Z" 16.26
Cost of 10 nos. 1641.81
Cost of each 164.18
Say 164.20
14.40.4 75x40x2.5 mm (ordinary type)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos.
MATERIAL
0527 Chromium plated Brass butt hinges (light/ordinary)
type 75x40x2.5 mm 10 Nos 1.00 421.00 421.00
0587 Chromium plated Brass screws 30 mm 100 Nos 0.60 240.00 144.00
9977 Carriage of material L.S. 1.82 2.12 3.86
LABOUR
0111 Carpenter 1st class day 0.14 784.00 109.76
0114 Beldar day 0.10 645.00 64.50
TOTAL 743.12
Add 1 % Water charges on "W" 7.43
TOTAL 750.55
Add GST on "X" (multiplying factor 0.1405) 105.45
TOTAL 856.00
Add 15% CPOH on "Y" 128.40
TOTAL 984.40
Add Cess @ 1% on "Z" 9.84
Cost of 10 nos. 994.25
Cost of each 99.42
Say 99.40
14.40.5 50x40x2.5 mm (ordinary type)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 nos.
MATERIAL
0528 Chromium plated Brass butt hinges (light/ordinary)
type 50x40x2.5 mm 10 Nos 1.00 180.00 180.00
0589 Chromium plated Brass screws 20 mm 100 Nos 0.40 160.00 64.00
9977 Carriage of material L.S. 0.91 2.12 1.93
LABOUR
0111 Carpenter 1st class day 0.08 784.00 62.72
TOTAL 308.65
Add 1 % Water charges on "W" 3.09
TOTAL 311.74
Add GST on "X" (multiplying factor 0.1405) 43.80
TOTAL 355.53
Add 15% CPOH on "Y" 53.33
TOTAL 408.86
Add Cess @ 1% on "Z" 4.09
Cost of 10 nos. 412.95
Cost of each 41.30
Say 41.30

14.41 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts,
washers etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 Nos
MATERIAL
2467 Chromium plated Brass pull bolt lock (locking bolt) of
size 85 mmx42 mm with screws,bolts,nuts and
washers complete each 10.00 172.00 1720.00
9988 Carriage of materials & sundries L.S. 6.37 2.12 13.50
LABOUR
0112 Carpenter 2nd class day 0.25 714.00 178.50
TOTAL 1912.00
Add 1 % Water charges on "W" 19.12
TOTAL 1931.12
Add GST on "X" (multiplying factor 0.1405) 271.32
TOTAL 2202.45
Add 15% CPOH on "Y" 330.37
TOTAL 2532.81
Add Cess @ 1% on "Z" 25.33
Cost of 10 nos. 2558.14
Cost of each 255.81
Say 255.80
14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40
M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required dura
approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building
wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per d
and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment w
once irrespective of duration of scaffolding.
Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for area 22.5m x 9.0m =202.5 sqm
14.72X Rate as per Item No.14.72X of SH:Repairs to
Buildings each 1.00 7911.85 7911.85
2205 Carriage of Steel tonne 6.054 145.72 882.19
40mm dia MS pipe = 3765.42 kg
25mm spigot = 123.98 kg
Nuts & bolts = 37.80 kg
Clamp = 120 nos @ 1.00kg each = 120.00 kg
Challies = 90 nos @ 15.00kg each
= 1350.00 kg
Cup locks = 1314 nos @ 0.50kg each
= 657.00 kg
Total = 6054.20 kg = 6.054 tonne
LABOUR
0116 Fitter (grade 1) day 15.50 784.00 12152.00
0114 Beldar day 31.00 645.00 19995.00
9999 Sundries L.S. 1035 2.12 2194.20
TOTAL 43135.24
Add 1 % Water charges on "W" 431.35
TOTAL 43566.59
Add GST on "X" (multiplying factor 0.1405) 6121.11
TOTAL 49687.70
Add 15% CPOH on "Y" 7453.15
TOTAL 57140.85
Add Cess @ 1% on "Z" 571.41
Cost of 202.50 sqm. 57712.26
Cost of 1 sqm. 285.00
Say 285.00

14.72X Scaffolding
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for area 22.5 x 9.0= 202.50 sqm MATERIAL
Assuming shuttering material will become unserviceable after
use of 40 times
Base jack 7x2=14 nos
Mild steel tubes hot finished welded type 40mm dia M.S. Tube
Vertical standard 2.5m length
7397 = 7x2x9x2.5 = 315.00 m each 14.00 145.00 2030.00
4009 Bracing ledder 1.5m length = 7x2x9x4.0873 = 513.00 m kilogram 3765.42 60.00 225925.20

7387 Side support 6.00m length = 3x2x6.00= 36.00 m Horizontal kg 123.98 40.00 4959.20
1034 support 3.00m length = 18x3x3.00 = 162.00 m quintal 0.378 5200.00 1965.60
7346 Total = 1026.00m @ 3.67 kg/m = 3765.42 kg Spigot for each each 120.00 46.00 5520.00
7398 standard jointing each 90.00 765.00 68850.00
7399 7x2x9 = 126 nos x 0.40m length = 50.40m 50.40m @ 2.46kg/m 1314.00 48.00 63072.00
= 123.98kg 372322.00
Bolts and nuts upto 300 mm in length 2x7x2x9 = 252 nos @ 37232.20
0.15 kg each -93080.5
= 37.80 kg = 0.378 q 316473.70
Double coupler 7911.84
2x3x2 + 2x18x3 = 120 nos Challies 7911.85
3 nos x 18 lines = 54 nos
Two level plate challies = 2x 18 lines = 36 nos, Total = 90 nos
Cup lock
Vertical standards 5x7x2x9 = 630.00 Nos. 2x18x19 = 684 Nos.
Total =1314 Nos. TOTAL
Add 10% for maintenance on P Less 25% salvage value on P
TOTAL (P+Q+R)
Considering that scaffolding shall be unserviceable after using
40 times
cost of using once
Say

14.73 Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessar
and machine screws etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


0423 Details of cost for 10 nos (10 x 0.20 = 2.00 kg) MATERIAL each L.S. 10.00 45.00 450.00
9999 Brass casement window fastener L.S. 125.58 2.12 266.23
9977 Fixing charges including welding and materials etc. 3.64 2.12 7.72
Carriage of materials TOTAL 723.95
Add 1 % Water charges on "W" TOTAL 7.24
Add GST on "X" (multiplying factor 0.1405) TOTAL 731.19
Add 15% CPOH on "Y" TOTAL 102.73
Add Cess @ 1% on "Z" 833.92
Cost of 2.00kg window fasteners Cost of 1 kg window fastener 125.09
Say 959.01
9.59
968.60
484.30
484.30

14.74 Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and
screws etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


0428 Details of cost for 10 nos MATERIAL 10 Nos L.S. 1.00 170.00 170.00
9999 Brass fanlight catch L.S. 125.58 2.12 266.23
9977 Fixing charges including welding and materials etc. 3.64 2.12 7.72
Carriage of materials TOTAL 443.95
Add 1 % Water charges on "W" TOTAL 4.44
Add GST on "X" (multiplying factor 0.1405) 448.39
63.00

TOTAL 511.38
Add 15% CPOH on "Y" TOTAL 76.71
Add Cess @ 1% on "Z" Cost of 10 window fasteners Cost of 588.09
each 5.88
Say 593.97
59.40
59.40

14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper
raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including
rubbish, all
complete as per the direction of Engineer-In-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0772 Details of cost for 10 sqm MATERIAL kg 125.00 15.00 1875.00
9977 White cement based polymer modified self curing compound in L.S. 21.10 2.12 44.73
0155 powder form day day day 1.21 749.00 906.29
0114 i/c 2% wastage L.S. 0.54 645.00 348.30
0115 Carriage of white cement based polymer modified self curing 1.29 645.00 832.05
9999 compound in powder form 15.21 2.12 32.25
LABOUR 4038.62
Mason (average) Beldar 40.39
Coolie 4079.00
Scaffolding and sunderies TOTAL 573.10
Add 1 % Water charges on "W" TOTAL 4652.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 697.82
Add 15% CPOH on "Y" TOTAL 5349.92
Add Cess @ 1% on "Z" Cost of 10 sqm 53.50
Cost of 1 sqm 5403.42
Say 540.34
540.35

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brus
14.75A duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching po
0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil
and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank shou
removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio
made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor
own cost and nothing extra will be paid on this account)

Code Description Unit Quantity Rate Rs. Amount Rs.


1301 Details of cost for 10 tanks quintal cum 0.025 1800.00 45.00
2264 1 tank is of 500 litres capacity i.e. 5000 litres MATERIAL L.S. 0.25 163.93 40.98
9999 Bleaching powder Carriage of Rubbish day day 30.00 2.12 63.60
0117 (asuming 0.040m depth of silt) 1.00 714.00 714.00
0114 Marking with paint i/c removal of existing markings LABOUR 1.00 645.00 645.00
Assistant Fitter or 2nd class Fitter 1508.58
for opening ball cock wheel valve and other fittings Beldar
for cleaning disinfecting etc
TOTAL

Add 1 % Water charges on "W" TOTAL 15.09


Add GST on "X" (multiplying factor 0.1405) TOTAL 1523.67
Add 15% CPOH on "Y" TOTAL 214.08
Add Cess @ 1% on "Z" Cost of 5000 litres Cost of 1 litre 1737.74
Say 260.66
1998.41
19.98
2018.39
0.40
0.40
14.76 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all
direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0129 Details of cost for 10 Nos. LABOUR day L.S. 1.00 645.00 645.00
9999 Sewerman 11.20 2.12 23.74
T & P Bamboo, bucket, whell barrow etc. TOTAL 668.74
Add 1 % Water charges on "W" TOTAL 6.69
Add GST on "X" (multiplying factor 0.1405) TOTAL 675.43
Add 15% CPOH on "Y" TOTAL 94.90
Add Cess @ 1% on "Z" Cost of 10 nos 770.33
Cost of each 115.55
Say 885.88
8.86
894.74
89.47
89.45

14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting
cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled op
supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of
from one manhole to another by high pressure jetting
system of 2200 PSI for sewer line from 150mm dia upto 300mm

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Details of Cost for 208 metres MATERIAL L.S. 345.00 2.12 731.40
8500 Soap, brush, cloths & sundries Water for jetting / blowback 1000 litre 0.002 1500.00 3.00
0087 Machineries day 1.00 40000.00 40000.00
0139 Hire Charges of Suction Jeting machine 2200 PSI machine i/c day day 4.00 714.00 2856.00
0160 POL and operator 1.00 853.00 853.00
LABOUR 44443.40
Skilled Beldar (for floor rubbing etc.) Technician 444.43
TOTAL 44887.83
Add 1 % Water charges on "W" TOTAL 6306.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 51194.57
Add 15% CPOH on "Y" TOTAL 7679.19
Add Cess @ 1% on "Z" Cost of 208 metres Cost of 1.00 metre 58873.76
Say 588.74
59462.50
285.88
285.90
14.78 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all a
direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer- in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0011 Let a underground tank of capacity 272000 litre or 272 KL and day day 1.70 700.00 1190.00
0114 area of tank is 570sqm day day day 10.88 645.00 7017.60
0114 (a) Dewater and slit cleaning L.S. 5.13 645.00 3308.85
0115 Considering through pumping 20% of water to be lifted, water quintal 2.28 645.00 1470.60
0101 discharge =(272 x 20/100=54.40KL) Cost of pumping water with day day 2.28 714.00 1627.92
9999 pump of capacity 4000 litres per hours , = (54.4/4 =13.6 hours = hour day 142.50 2.12 302.10
1301 @ 8 hours/ day = 1.7 day) hour day 0.57 1800.00 1026.00
0006 Hire charges of Pump set of capacity 4000 litres/hour 14.25 250.00 3562.50
0138 Beldar 14.25 714.00 10174.50
0058 (b) Scrabing the internal surface of tank Beldar 2.00 200.00 400.00
0114 Coolie Bhisti Sundries 0.25 645.00 161.25
0085 (c) Bleaching Bleaching powder 0.50 190.00 95.00
0114 Hire charges of Spraying machine including electric charges 0.0625 645.00 40.31
Sprayer (for bitumen, tar etc.) 30376.63
(d) Air jetting Air compressor Beldar 303.77
(e) Ultra Violet Radiation 30680.40
Using cost of Ultra Violet Radiation tube Beldar 4310.60
TOTAL 34990.99
Add 1 % Water charges on "W" TOTAL 5248.65
Add GST on "X" (multiplying factor 0.1405) TOTAL 40239.64
Add 15% CPOH on "Y" TOTAL 402.40
Add Cess @ 1% on "Z" Cost of 570 sqm 40642.04
Cost of 1 sqm 71.30
Say 71.30

14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from t
including shifting at ground level as per direction of Engineer-
in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0117 Details of cost for 1 No LABOUR day day 0.10 714.00 71.40
0114 For disconnecting & dismantling of existing W/s line of water day L.S. 0.10 645.00 64.50
0114 storage tanks on terrace of Qtrs. 0.20 645.00 129.00
9999 Assistant Fitter or 2nd class Fitter Beldar 1.10 2.12 2.33
For Bringing the tank at Ground Level Beldar 267.23
Sundries TOTAL 2.67
Add 1 % Water charges on "W" TOTAL 269.90
Add GST on "X" (multiplying factor 0.1405) TOTAL 37.92
Add 15% CPOH on "Y" TOTAL 307.83
Add Cess @ 1% on "Z" Cost for each 46.17
Say 354.00
3.54
357.54
357.55

14.80 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dism
old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of disman
material i/c malba, all complete as per the direction of Engineer-in charge.
14.80.1 Long pattern W.C Pan of size 580x440 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


1953 Details of cost for 1 no. MATERIAL each pair each 1.00 475.00 475.00
1970 Vitreous china Indian type W.C. pan size 580 mm Vitreous L.S. 1.00 103.00 103.00
1890 china foot rests 250x125x25 mm Centrifugally sand cast (spun) L.S. 1.00 325.00 325.00
9999 S&S "P" or "S" trap Cement sand & grit etc. kg 13.36 2.12 28.32
9977 Carriage of materials Less for day day 13.52 2.12 28.66
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg.) LABOUR day day -2.00 25.00 -50.00
0129 (a) For dismantling WC seat and P or S trap Sewerman 0.05 645.00 32.25
0114 Beldar 0.20 645.00 129.00
0126 (b) For Fixing WC seat and "P" or "S" trap Mason 1st class 0.80 784.00 627.20
0114 Beldar TOTAL 0.80 645.00 516.00
Add 1 % Water charges on "W" TOTAL 2214.44
Add GST on "X" (multiplying factor 0.1405) TOTAL 22.14
Add 15% CPOH on "Y" TOTAL 2236.58
Add Cess @ 1% on "Z" Cost of each 314.24
Say 2550.82
382.62
2933.44
29.33
2962.78
2962.80

14.80.2 Orissa pattern W.C Pan of size 580x440 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no. MATERIAL
Vitreous china orrisa type W.C. pan size 580 mm Centrifugally
1954 sand cast (spun) S&S "P" or "S" trap Cement sand & grit etc. 1.00 1290.00 1290.00
1890 Carriage of materials each each L.S. 1.00 325.00 325.00
9999 Less for L.S. 13.36 2.12 28.32
9977 13.52 2.12 28.66
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg.) kg -2.00 25.00 -50.00
0129 LABOUR day day 0.05 645.00 32.25
0114 (a) For dismantling WC seat and P or S trap Sewerman day day 0.125 645.00 80.63
0126 Beldar 0.80 784.00 627.20
0114 (b) For Fixing WC seat and "P" or "S" trap Mason 1st class 0.80 645.00 516.00
Beldar TOTAL 2878.06
Add 1 % Water charges on "W" TOTAL 28.78
Add GST on "X" (multiplying factor 0.1405) TOTAL 2906.84
Add 15% CPOH on "Y" TOTAL 408.41
Add Cess @ 1% on "Z" Cost of each 3315.25
Say 497.29
3812.54
38.13
3850.67
3850.65

14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PV
conforming BIS-12818 and making good the same etc. complete
as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


13.4.1 Detail of Cost for 10 holes Size 0.30x0.30x0.23 m wall sqm metre 3.00 307.25 921.75
7752 MATERIAL L.S. 0.25 810.00 202.50
9999 12 mm plaster 1:4 (1 Cement: 4 Coarse sand) Actual Area day day 8.06 2.12 17.09
0123 (10x4x0.3x0.23) = 0.296 + 0.24 day L.S. 0.11 784.00 86.24
0124 L.S. For corners/sides = 3.00 Sqm 0.11 714.00 78.54
0114 Rate as per Item No.13.4.1 of SH:FINISHING PVC slotted pipe 1.10 645.00 709.50
9999 200 mm dia as per IS: 12818 Sundries 16.12 2.12 34.17
LABOUR 2049.79
Proportionate labour taken as actually required at site 11.28
Mason (brick layer) 1st class (0.16/0.0306)= 0.11 Nos. 2061.07
Mason (brick layer) 2nd class (0.16/0.030)x0.207 = 0.11 Nos. 160.07
Beldar 2221.15
(1.25x0.207)/0.0306 =1.10 Nos. 194.91
Add L.S. For Delay TOTAL 2416.06
Add 1 % Water charges on "W-A" TOTAL 14.94
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 2431.00
Add 15% CPOH on "Y-A" TOTAL 243.10
Add Cess @ 1% on "Z-A" Cost of 10 nos 243.10
Cost of each
Say

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of E
Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no. LABOUR
Beldar
Sundries TOTAL 80.63
0114 0.125 645.00
day L.S. 2.12
9999 1.00 2.12
82.75

Add 1 % Water charges on "W" TOTAL 0.83


Add GST on "X" (multiplying factor 0.1405) TOTAL 83.57
Add 15% CPOH on "Y" TOTAL 11.74
Add Cess @ 1% on "Z" Cost of each 95.31
Say 14.30
109.61
1.10
110.71
110.70

14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Details of cost for 10 sqm LABOUR day L.S. 0.03 645.00 19.35
9999 Beldar Sundries TOTAL 1.00 2.12 2.12
Add 1 % Water charges on "W" TOTAL 21.47
Add GST on "X" (multiplying factor 0.1405) TOTAL 0.21
Add 15% CPOH on "Y" TOTAL 21.68
Add Cess @ 1% on "Z" Cost of 10 sqm 3.05
Cost of 1 sqm 24.73
Say 3.71
28.44
0.28
28.73
2.87
2.85

14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of En
Charge.
(a) Internal Work- Exposed on wall

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Details of cost for 10 metre LABOUR L.S. 10.00 2.12 21.20
Dismantling of G.I. Pipe and stacking etc. TOTAL 21.20
Add 1 % Water charges on "W" TOTAL 0.21
Add GST on "X" (multiplying factor 0.1405) TOTAL 21.41
Add 15% CPOH on "Y" TOTAL 3.01
Add Cess @ 1% on "Z" Cost of 10 metres 24.42
Cost of 1 metre 3.66
Say 28.08
0.28
28.36
2.84
2.85
14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing
frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one shutter (2.2 sqm)
Normal exiting size of shutter 1.00x2.02m =2.02sqm
MATERIAL
Bright finished or black enameled mild steel screws 40 mm
0637 Assuming old hinges fixed in Tee iron frames
Half qty = 48/2=24 needs replacement

100 Nos 0.24 60.00 14.40

LABOUR
0156 Carpenter (average) day 0.18 749.00 134.82
0114 Beldar day 0.18 645.00 116.10
TOTAL 265.32
Add 1 % Water charges on "W" 2.65
TOTAL 267.97
Add GST on "X" (multiplying factor 0.1405) 37.65
TOTAL 305.62
Add 15% CPOH on "Y" 45.84
TOTAL 351.47
Add Cess @ 1% on "Z" 3.51
Cost for 2.2 sqm or each shutter 354.98
Cost for 2.02 sqm or each shutter 325.94
Say 325.95
14.86 Providing and laying in situ seven course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric
memberane over roof consisting of first coat of bitumen primer @
0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85
conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm we
consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix an
polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of cla
designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight o
over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 sqm
MATERIAL
APP modified polymeric felt (two layers) 1.5 mm thick
= 2x30 = 60 sqm + Add 10% wastage = 6 sqm. Total =
66 sqm
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm
thick sqm 66.00 80.00 5280.00
0316 Bitumen solution primer of approved quality litre 12.00 47.00 564.00
0.4x30 = 12
0313 Blown type petroleum bitumen of penetration 85/25 of
approved quality tonne 0.108 34790.00 3757.32
3x36 =108 kg = 0.108 tonne
2211 Carriage of Tar bitumen tonne 0.12 163.93 19.67
9977 Carriage of polymeric felt L.S. 7.80 2.12 16.54
0370 Coal (steam) quintal 0.174 440.00 76.56
2200 Carriage of steam coal tonne 0.0174 187.35 3.26
9999 Preparing roof surface, cutting grooves and making
good the same L.S. 134.55 2.12 285.25
LABOUR
0131 Painter day 2.16 714.00 1542.24
0114 Beldar day 3.24 645.00 2089.80
0130 Mistry day 0.18 784.00 141.12
9999 Sundries, brushes etc L.S. 6.76 2.12 14.33
TOTAL 13790.08
Add 1 % Water charges on "W" 137.90
TOTAL 13927.99
Add GST on "X" (multiplying factor 0.1405) 1956.88
TOTAL 15884.87
Add 15% CPOH on "Y" 2382.73
TOTAL 18267.60
Add Cess @ 1% on "Z" 182.68
Cost for 30 sqm 18450.27
Cost for 1 sqm 615.01
Say 615.00
14.87 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric me
over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, whic
consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membr
thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on bot
with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be fin
brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing com
weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand)
and finished neat (item of laying brick tiles shall be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 sqm
MATERIAL
APP modified polymeric felt (two layers) 2.0 mm thick
= 30 sqm
Add 10% wastage = 3 sqm
Total = 33 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick
sqm 33.00 120.00 3960.00
0316 Bitumen solution primer of approved quality litre 12.00 47.00 564.00
0.4x30 = 12
0313 Blown type petroleum bitumen of penetration 85/25 of
approved quality tonne 0.072 34790.00 2504.88
1.20x30x2 =72 kg = 0.072 tonne
2211 Carriage of Tar bitumen tonne 0.084 163.93 13.77
9977 Carriage of polymeric felt L.S. 7.80 2.12 16.54
0370 Coal (steam) quintal 0.174 440.00 76.56
2200 Carriage of steam coal tonne 0.0174 187.35 3.26
9999 Preparing roof surface, cutting grooves and making
good the same L.S. 134.55 2.12 285.25
LABOUR
0131 Painter day 1.58 714.00 1128.12
0114 Beldar day 2.37 645.00 1528.65
0130 Mistry day 0.13 784.00 101.92
9999 Sundries, brushes etc L.S. 6.76 2.12 14.33
TOTAL 10197.27
Add 1 % Water charges on "W" 101.97
TOTAL 10299.25
Add GST on "X" (multiplying factor 0.1405) 1447.04
TOTAL 11746.29
Add 15% CPOH on "Y" 1761.94
TOTAL 13508.23
Add Cess @ 1% on "Z" 135.08
Cost for 30 sqm 13643.32
Cost for 1 sqm 454.78
Say 454.80
14.88 Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric
over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,
consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymer
membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film
on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most la
finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral wate
compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand)
and finished neat (item of laying brick tiles shall be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 sqm
MATERIAL
APP modified polymeric felt (two layers) 2.0 mm thick
= 2x30 = 60 sqm
Add 10% wastage = 6 sqm
Total = 66 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick
sqm 66.00 120.00 7920.00
0316 Bitumen solution primer of approved quality litre 12.00 47.00 564.00
0.4x30 = 12
0313 Blown type petroleum bitumen of penetration 85/25 of
approved quality tonne 0.108 34790.00 3757.32
3course x 36 = 108 kg = 0.108 tonne
2211 Carriage of Tar bitumen tonne 0.12 163.93 19.67
9977 Carriage of polymeric felt L.S. 7.80 2.12 16.54
0370 Coal (steam) quintal 0.174 440.00 76.56
2200 Carriage of steam coal tonne 0.0174 187.35 3.26
9999 Preparing roof surface, cutting grooves and making
good the same L.S. 134.55 2.12 285.25
LABOUR
0131 Painter day 2.16 714.00 1542.24
0114 Beldar day 3.24 645.00 2089.80
0130 Mistry day 0.18 784.00 141.12
9999 Sundries, brushes etc L.S. 6.76 2.12 14.33
TOTAL 16430.08
Add 1 % Water charges on "W" 164.30
TOTAL 16594.39
Add GST on "X" (multiplying factor 0.1405) 2331.51
TOTAL 18925.90
Add 15% CPOH on "Y" 2838.88
TOTAL 21764.78
Add Cess @ 1% on "Z" 217.65
Cost for 30 sqm 21982.43
Cost for 1 sqm 732.75
Say 732.75
14.89 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing me
black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the
membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membra
laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters o
membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in lon
and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested
accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture o
membrane.
14.89.1 2mm (for corrugated roof sheets)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 sqm
MATERIAL
A.P.P. modified 2 mm thick = 30 sqm
Add 10% for wastage - 3 sqm
Total= 33 sqm
8203 A.P.P. modified 2 mm thick membrance reinforced
with glass fibre matt sqm 33.00 130.00 4290.00
8206 Bitumen primer for bitumen membrance litre 12.00 85.00 1020.00
2211 Carriage of Tar bitumen tonne 0.012 163.93 1.97
9977 Carriage of bitumen membrance L.S. 7.80 2.12 16.54
1241 Commercial LPG in cylinder kg 7.00 84.00 588.00
9999 Preparing roof surface, cutting grooves L.S. 49.53 2.12 105.00
LABOUR
0159 Skilled torch operator for laying tack day 2.16 784.00 1693.44
0130 Mistry day 0.18 784.00 141.12
0114 Beldar day 3.24 645.00 2089.80
9999 Sundries, brushes, bitumen torch etc L.S. 23.40 2.12 49.61
TOTAL 9995.47
Add 1 % Water charges on "W" 99.95
TOTAL 10095.43
Add GST on "X" (multiplying factor 0.1405) 1418.41
TOTAL 11513.84
Add 15% CPOH on "Y" 1727.08
TOTAL 13240.91
Add Cess @ 1% on "Z" 132.41
Cost for 30 sqm 13373.32
Cost for 1 sqm 445.78
Say 445.80
14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing m
black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the
membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membran
laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters o
membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in lon
and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested
accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer o
membrane :
14.90.1 3 mm thick

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 sqm MATERIAL
A.P.P. modified 3 mm thick = 30 sqm
8204 Add 10% for wastage - 3 sqm Total = 33 sqm sqm litre 33.00 190.00 6270.00
8206 A.P.P. modified 3 mm thick membrance reinforced with glass tonne L.S. 12.00 85.00 1020.00
2211 fibre matt kg L.S. 0.012 163.93 1.97
9977 Bitumen primer for bitumen membrance Carriage of Tar day day 7.80 2.12 16.54
1241 bitumen day L.S. 7.00 84.00 588.00
9999 Carriage of bitumen membrance Commercial LPG in cylinder 49.53 2.12 105.00
0159 Preparing roof surface, cutting grooves LABOUR 2.16 784.00 1693.44
0130 Skilled torch operator for laying tack Mistry 0.18 784.00 141.12
0114 Beldar 3.24 645.00 2089.80
9999 Sundries, brushes, bitumen torch etc TOTAL 23.40 2.12 49.61
Add 1 % Water charges on "W" TOTAL 11975.47
Add GST on "X" (multiplying factor 0.1405) TOTAL 119.75
Add 15% CPOH on "Y" TOTAL 12095.23
Add Cess @ 1% on "Z" Cost for 30 sqm 1699.38
Cost for 1 sqm 13794.61
Say 2069.19
15863.80
158.64
16022.44
534.08
534.10

14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing m
black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/s
same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of memb
be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical paramete
membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in lon
and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when test
accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer o
membrane :
14.91.1 3 mm thick

Code Description Unit Quantity Rate Rs. Amount Rs.


8205 Detail of cost for 30 sqm MATERIAL
8206 A.P.P. modified 3 mm thick - 30 sqm Add 10% for wastage - 3
2211 sqm
9977 Total = 33 sqm
1241 A.P.P. modified 3 mm thick membrance reinforced with polyster
9999 matt
0159 Bitumen primer for bitumen membrance Carriage of Tar 6930.00
0130 bitumen 1020.00
0114 Carriage of bitumen membrance Fuel 33.00 210.00 1.97
9999 Commercial LPG in cylinder 12.00 85.00 16.54
Preparing roof surface, cutting grooves LABOUR 0.012 163.93 588.00
sqm litre
Skilled torch operator for laying tack Mistry 7.80 2.12 105.00
tonne L.S.
Beldar 7.00 84.00 1693.44
kg L.S.
Sundries, brushes, bitumen torch etc TOTAL 49.53 2.12 141.12
day day
Add 1 % Water charges on "W" TOTAL 2.16 784.00 2089.80
day L.S.
Add GST on "X" (multiplying factor 0.1405) 0.18 784.00 49.61
3.24 645.00 12635.47
23.4 2.12 126.35
12761.83
1793.04

TOTAL 14554.87
Add 15% CPOH on "Y" TOTAL 2183.23
Add Cess @ 1% on "Z" Cost for 30 sqm 16738.10
Cost for 1 sqm 167.38
Say 16905.48
563.52
563.50

14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonde
membrane with intermittent touch by heating the
membrane by Butane Torch as per manufactures recommendation.

Code Description Unit Quantity Rate Rs. Amount Rs.


8207 Detail of cost for 30 sqm MATERIAL sqm L.S. 31.50 45.00 1417.50
9977 Geotextile 120 gsm membrance - 30 sqm Add 5% for wastage - day day day 7.80 2.12 16.54
0159 1.50 sqm L.S. 0.43 784.00 337.12
0130 Total= 31.50 sqm 0.04 784.00 31.36
0114 Geotextile 120 gsm membrance Carriage of Geotextile 0.65 645.00 419.25
9999 LABOUR 46.80 2.12 W 99.22
Skilled torch operator for laying tack or fitter 2.16 / 5 = 0.43 2320.98
Mistry 23.21
0.18 / 5 = 0.04 2344.19
Beldar 329.36
3.24-5 / 0.65 2673.55
Sundries, torch, LPG etc TOTAL 401.03
Add 1 % Water charges on "W" TOTAL 3074.58
Add GST on "X" (multiplying factor 0.1405) TOTAL 30.75
Add 15% CPOH on "Y" TOTAL 3105.33
Add Cess @ 1% on "Z" Cost for 30 sqm 103.51
Cost for 1 sqm 103.50
Say
14.93 Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by
neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc.complete,as per the direct
Engineer-in-
charge. (One job means 8 hour's duty).

Code Description Unit Quantity Rate Rs. Amount Rs.


0164 Details of cost for 1 job (8hour's duty) Security guard (without day L.S. 1.00 784.00 78W4.00
9999 gun) Lathi,torch,dress & other sundries TOTAL 10.00 2.12 21.20
Add 1 % Water charges on "W" TOTAL 805.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 8.05
Add 15% CPOH on "Y" TOTAL 813.25
Add Cess @ 1% on "Z" Cost of 1 job 114.26
Say 927.51
139.13
1066.64
10.67
1077.31
1077.30

14.94 Providing round the clock security guard with gun for watch & ward of Government premises and its all belongings by de
neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc.complete, as per the direc
Engineer-in-
charge. (One job means 8 hour's duty).

Code Description Unit Quantity Rate Rs. Amount Rs.


0165 Details of cost for 1 job (8hour's duty) Security guard (with gun) day L.S. 1.00 853.00 853.00
9999 Lathi,torch,uniform,wooden stick & other miscellaneous items 10.00 2.12 21.20
TOTAL 874.20
Add 1 % Water charges on "W" TOTAL 8.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 882.94
Add 15% CPOH on "Y" TOTAL 124.05
Add Cess @ 1% on "Z" Cost of 1 job 1007.00
Say 151.05
1158.04
11.58
1169.63
1169.65
SUB HEAD : 15.0
DISMANTLING AND DEMOLISHING
873
SUB HEAD : 15.0
DISMANTLING AND DEMOLISHING
873

15.1 Demolishing lime concrete manually/ by mechanical means and disposal of material within 50
metres lead as per direction of Engineer- in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.44 645.00 283.80
0115 Coolie day 0.37 645.00 238.65
9999 Sundries L.S. 1.04 2.12 2.20
TOTAL 524.65
Add 1 % Water charges on "W" 5.25
TOTAL 529.90
Add GST on "X" (multiplying factor 0.1405) 74.45
TOTAL 604.35
Add 15% CPOH on "Y" 90.65
TOTAL 695.01
Add Cess @ 1% on "Z" 6.95
Cost of 1.00 cum 701.96
Say 701.95
15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as p
of Engineer - in - charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.59 645.00 1025.55
0115 Coolie day 0.72 645.00 464.40
9999 Sundries L.S. 4.81 2.12 10.20
TOTAL 1500.15
Add 1 % Water charges on "W" 15.00
TOTAL 1515.15
Add GST on "X" (multiplying factor 0.1405) 212.88
TOTAL 1728.03
Add 15% CPOH on "Y" 259.20
TOTAL 1987.23
Add Cess @ 1% on "Z" 19.87
Cost of 1.00 cum 2007.10
Say 2007.10

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.88 645.00 567.60
0115 Coolie day 0.55 645.00 354.75
9999 Sundries L.S. 1.95 2.12 4.13
TOTAL 926.48
Add 1 % Water charges on "W" 9.26
TOTAL 935.75
Add GST on "X" (multiplying factor 0.1405) 131.47
TOTAL 1067.22
Add 15% CPOH on "Y" 160.08
TOTAL 1227.30
Add Cess @ 1% on "Z" 12.27
Cost of 1.00 cum 1239.58
Say 1239.60
15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and
disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 2.65 645.00 1709.25
0115 Coolie day 0.72 645.00 464.40
9999 Sundries L.S. 7.02 2.12 14.88
TOTAL 2188.53
Add 1 % Water charges on "W" 21.89
TOTAL 2210.42
Add GST on "X" (multiplying factor 0.1405) 310.56
TOTAL 2520.98
Add 15% CPOH on "Y" 378.15
TOTAL 2899.13
Add Cess @ 1% on "Z" 28.99
Cost of 1.00 cum 2928.12
Say 2928.10
15.4 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable
within 50 metres lead as per direction of Engineer-in- charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 2.12 645.00 1367.40
0115 Coolie day 0.90 645.00 580.50
9999 Sundries L.S. 4.68 2.12 9.92
TOTAL 1957.82
Add 1 % Water charges on "W" 19.58
TOTAL 1977.40
Add GST on "X" (multiplying factor 0.1405) 277.82
TOTAL 2255.22
Add 15% CPOH on "Y" 338.28
TOTAL 2593.51
Add Cess @ 1% on "Z" 25.94
Cost of 1.00 cum 2619.44
Say 2619.45
15.5 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on
sectional area of R.C.C. or R.B. work) as per direction of
Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 sqm
R.C.C. or R.B. workReinforced area considering 1%
reinforcement = 0.01sqm
LABOUR
For cutting 0.01 sqm reinforcement
0103 Blacksmith 2nd class day 0.50 714.00 357.00
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 707.89
Add 1 % Water charges on "W" 7.08
TOTAL 714.97
Add GST on "X" (multiplying factor 0.1405) 100.45
TOTAL 815.42
Add 15% CPOH on "Y" 122.31
TOTAL 937.73
Add Cess @ 1% on "Z" 9.38
Cost of 1.00 sqm 947.11
Say 947.10
15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 Nos
6 metres long 16 mm dia bars @ 1.58 kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
0103 Blacksmith 2nd class day 0.25 714.00 178.50
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 529.39
Add 1 % Water charges on "W" 5.29
TOTAL 534.68
Add GST on "X" (multiplying factor 0.1405) 75.12
TOTAL 609.80
Add 15% CPOH on "Y" 91.47
TOTAL 701.27
Add Cess @ 1% on "Z" 7.01
Cost of 94.80 kg 708.29
Cost of 1.00 kg 7.47
Say 7.45
15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of uns
material within 50 metres lead as per direction of Engineer-in-charge.
15.7.1 In mud mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.30 645.00 193.50
0115 Coolie day 0.37 645.00 238.65
9999 Sundries L.S. 1.04 2.12 2.20
TOTAL 434.35
Add 1 % Water charges on "W" 4.34
TOTAL 438.70
Add GST on "X" (multiplying factor 0.1405) 61.64
TOTAL 500.34
Add 15% CPOH on "Y" 75.05
TOTAL 575.39
Add Cess @ 1% on "Z" 5.75
Cost of 1.00 cum 581.14
Say 581.15

15.7.2 In lime mortar with old mughal bricks

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.24 645.00 799.80
0115 Coolie day 0.46 645.00 296.70
9999 Sundries L.S. 1.04 2.12 2.20
TOTAL 1098.70
Add 1 % Water charges on "W" 10.99
TOTAL 1109.69
Add GST on "X" (multiplying factor 0.1405) 155.91
TOTAL 1265.60
Add 15% CPOH on "Y" 189.84
TOTAL 1455.44
Add Cess @ 1% on "Z" 14.55
Cost of 1.00 cum 1470.00
Say 1470.00
15.7.3 In lime mortar
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.44 645.00 283.80
0115 Coolie day 0.37 645.00 238.65
9999 Sundries L.S. 1.04 2.12 2.20
TOTAL 524.65
Add 1 % Water charges on "W" 5.25
TOTAL 529.90
Add GST on "X" (multiplying factor 0.1405) 74.45
TOTAL 604.35
Add 15% CPOH on "Y" 90.65
TOTAL 695.01
Add Cess @ 1% on "Z" 6.95
Cost of 1.00 cum 701.96
Say 701.95

15.7.4 In cement mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.06 645.00 683.70
0115 Coolie day 0.90 645.00 580.50
9999 Sundries L.S. 2.47 2.12 5.24
TOTAL 1269.44
Add 1 % Water charges on "W" 12.69
TOTAL 1282.13
Add GST on "X" (multiplying factor 0.1405) 180.14
TOTAL 1462.27
Add 15% CPOH on "Y" 219.34
TOTAL 1681.61
Add Cess @ 1% on "Z" 16.82
Cost of 1.00 cum 1698.43
Say 1698.45
15.8 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks sh
measured):
15.8.1 From brick work in mud mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1000 Nos
LABOUR
0114 Beldar day 2.40 645.00 1548.00
0115 Coolie day 1.60 645.00 1032.00
0124 Mason (brick layer) 2nd class day 0.40 714.00 285.60
9999 Sundries L.S. 1.82 2.12 3.86
TOTAL 2869.46
Add 1 % Water charges on "W" 28.69
TOTAL 2898.15
Add GST on "X" (multiplying factor 0.1405) 407.19
TOTAL 3305.34
Add 15% CPOH on "Y" 495.80
TOTAL 3801.14
Add Cess @ 1% on "Z" 38.01
Cost of 1000 Nos 3839.16
Say 3839.15
15.8.2 From brick work in lime mortar
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 1000 Nos
LABOUR
0114 Beldar day 2.80 645.00 1806.00
0115 Coolie day 1.40 645.00 903.00
0124 Mason (brick layer) 2nd class day 0.80 714.00 571.20
9999 Sundries L.S. 8.97 2.12 19.02
TOTAL 3299.22
Add 1 % Water charges on "W" 32.99
TOTAL 3332.21
Add GST on "X" (multiplying factor 0.1405) 468.18
TOTAL 3800.38
Add 15% CPOH on "Y" 570.06
TOTAL 4370.44
Add Cess @ 1% on "Z" 43.70
Cost of 1000 Nos 4414.15
Say 4414.15

15.8.3 From brick work in cement mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1000 Nos
LABOUR
0114 Beldar day 3.50 645.00 2257.50
0115 Coolie day 1.50 645.00 967.50
0124 Mason (brick layer) 2nd class day 1.24 714.00 885.36
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 4127.45
Add 1 % Water charges on "W" 41.27
TOTAL 4168.72
Add GST on "X" (multiplying factor 0.1405) 585.71
TOTAL 4754.43
Add 15% CPOH on "Y" 713.16
TOTAL 5467.59
Add Cess @ 1% on "Z" 54.68
Cost of 1000 Nos 5522.27
Say 5522.25
15.9 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disp
unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
15.9.1 In lime mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.61 645.00 393.45
0115 Coolie day 0.49 645.00 316.05
9999 Sundries L.S. 1.95 2.12 4.13
TOTAL 713.63
Add 1 % Water charges on "W" 7.14
TOTAL 720.77
Add GST on "X" (multiplying factor 0.1405) 101.27
TOTAL 822.04
Add 15% CPOH on "Y" 123.31
TOTAL 945.34
Add Cess @ 1% on "Z" 9.45
Cost of 1.00 cum 954.80
Say 954.80
15.9.2 In cement mortar
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.30 645.00 838.50
0115 Coolie day 1.04 645.00 670.80
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 1515.09
Add 1 % Water charges on "W" 15.15
TOTAL 1530.24
Add GST on "X" (multiplying factor 0.1405) 215.00
TOTAL 1745.24
Add 15% CPOH on "Y" 261.79
TOTAL 2007.02
Add Cess @ 1% on "Z" 20.07
Cost of 1.00 cum 2027.09
Say 2027.10
15.10 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanic
including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charg
15.10.1 In lime mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.78 645.00 503.10
0115 Coolie day 0.61 645.00 393.45
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 902.34
Add 1 % Water charges on "W" 9.02
TOTAL 911.36
Add GST on "X" (multiplying factor 0.1405) 128.05
TOTAL 1039.41
Add 15% CPOH on "Y" 155.91
TOTAL 1195.32
Add Cess @ 1% on "Z" 11.95
Cost of 1.00 cum 1207.27
Say 1207.25

15.10.2 In cement mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.55 645.00 999.75
0115 Coolie day 1.19 645.00 767.55
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 1773.09
Add 1 % Water charges on "W" 17.73
TOTAL 1790.82
Add GST on "X" (multiplying factor 0.1405) 251.61
TOTAL 2042.43
Add 15% CPOH on "Y" 306.36
TOTAL 2348.79
Add Cess @ 1% on "Z" 23.49
Cost of 1.00 cum 2372.28
Say 2372.30
15.11 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned
materials will be measured):
15.11.1 In lime mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0124 Mason (brick layer) 2nd class day 0.05 714.00 35.70
0114 Beldar day 0.20 645.00 129.00
0115 Coolie day 0.20 645.00 129.00
9999 Sundries L.S. 0.52 2.12 1.10
TOTAL 294.80
Add 1 % Water charges on "W" 2.95
TOTAL 297.75
Add GST on "X" (multiplying factor 0.1405) 41.83
TOTAL 339.58
Add 15% CPOH on "Y" 50.94
TOTAL 390.52
Add Cess @ 1% on "Z" 3.91
Cost of 1.00 cum 394.43
Say 394.45

15.11.2 In cement mortar

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0124 Mason (brick layer) 2nd class day 0.05 714.00 35.70
0114 Beldar day 0.40 645.00 258.00
0115 Coolie day 0.20 645.00 129.00
9999 Sundries L.S. 0.91 2.12 1.93
TOTAL 424.63
Add 1 % Water charges on "W" 4.25
TOTAL 428.88
Add GST on "X" (multiplying factor 0.1405) 60.26
TOTAL 489.13
Add 15% CPOH on "Y" 73.37
TOTAL 562.50
Add Cess @ 1% on "Z" 5.63
Cost of 1.00 cum 568.13
Say 568.15
15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts
complete and stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each
LABOUR
0124 Mason (brick layer) 2nd class day 0.10 714.00 71.40
0114 Beldar day 0.18 645.00 116.10
0103 Blacksmith 2nd class day 0.05 714.00 35.70
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 226.23
Add 1 % Water charges on "W" 2.26
TOTAL 228.49
Add GST on "X" (multiplying factor 0.1405) 32.10
TOTAL 260.60
Add 15% CPOH on "Y" 39.09
TOTAL 299.69
Add Cess @ 1% on "Z" 3.00
Cost of each 302.68
Say 302.70
15.12.2 Of area beyond 3 sq. metres
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for each
LABOUR
0124 Mason (brick layer) 2nd class day 0.13 714.00 92.82
0114 Beldar day 0.25 645.00 161.25
0103 Blacksmith 2nd class day 0.07 714.00 49.98
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 309.84
Add 1 % Water charges on "W" 3.10
TOTAL 312.94
Add GST on "X" (multiplying factor 0.1405) 43.97
TOTAL 356.90
Add 15% CPOH on "Y" 53.54
TOTAL 410.44
Add Cess @ 1% on "Z" 4.10
Cost of each 414.54
Say 414.55
15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each
LABOUR
0112 Carpenter 2nd class day 0.05 714.00 35.70
0114 Beldar day 0.08 645.00 51.60
9999 Sundries L.S. 0.52 2.12 1.10
TOTAL 88.40
Add 1 % Water charges on "W" 0.88
TOTAL 89.29
Add GST on "X" (multiplying factor 0.1405) 12.54
TOTAL 101.83
Add 15% CPOH on "Y" 15.27
TOTAL 117.11
Add Cess @ 1% on "Z" 1.17
Cost of each 118.28
Say 118.30

15.13.2 Of area beyond 3 sq. metres


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for each
LABOUR
0112 Carpenter 2nd class day 0.07 714.00 49.98
0114 Beldar day 0.10 645.00 64.50
9999 Sundries L.S. 0.91 2.12 1.93
TOTAL 116.41
Add 1 % Water charges on "W" 1.16
TOTAL 117.57
Add GST on "X" (multiplying factor 0.1405) 16.52
TOTAL 134.09
Add 15% CPOH on "Y" 20.11
TOTAL 154.21
Add Cess @ 1% on "Z" 1.54
Cost of each 155.75
Say 155.75
15.14 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stac
material within 50 metres lead :
15.14.1 Of sectional area 40 square centimetres and above

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0112 Carpenter 2nd class day 2.00 714.00 1428.00
0114 Beldar day 2.00 645.00 1290.00
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 2746.39
Add 1 % Water charges on "W" 27.46
TOTAL 2773.85
Add GST on "X" (multiplying factor 0.1405) 389.73
TOTAL 3163.58
Add 15% CPOH on "Y" 474.54
TOTAL 3638.11
Add Cess @ 1% on "Z" 36.38
Cost of 1.00 cum 3674.49
Say 3674.50

15.14.2 Of sectional area below 40 square centimetres

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre
LABOUR
0112 Carpenter 2nd class day 0.08 714.00 57.12
0114 Beldar day 0.08 645.00 51.60
9999 Sundries L.S. 0.52 2.12 1.10
TOTAL 109.82
Add 1 % Water charges on "W" 1.10
TOTAL 110.92
Add GST on "X" (multiplying factor 0.1405) 15.58
TOTAL 126.50
Add 15% CPOH on "Y" 18.98
TOTAL 145.48
Add Cess @ 1% on "Z" 1.45
Cost of 10.00 metre 146.94
Cost of 1.00 metre 14.69
Say 14.70
15.15 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof b
metres :
15.15.1 Of sectional area 40 square centimetres and above

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1cum for every additional span of 1 metre
LABOUR
0103 Blacksmith 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 364.69
Add 1 % Water charges on "W" 3.65
TOTAL 368.33
Add GST on "X" (multiplying factor 0.1405) 51.75
TOTAL 420.08
Add 15% CPOH on "Y" 63.01
TOTAL 483.10
Add Cess @ 1% on "Z" 4.83
Cost of 1.00 cum per metre span 487.93
Say 487.95
15.15.2 Of sectional area below 40 square centimetres
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 metre for every additional span of 1
metre
LABOUR
0103 Blacksmith 2nd class day 0.006 714.00 4.28
0114 Beldar day 0.008 645.00 5.16
9999 Sundries L.S. 0.39 2.12 0.83
TOTAL 10.27
Add 1 % Water charges on "W" 0.10
TOTAL 10.37
Add GST on "X" (multiplying factor 0.1405) 1.46
TOTAL 11.83
Add 15% CPOH on "Y" 1.77
TOTAL 13.61
Add Cess @ 1% on "Z" 0.14
Cost of 10.00 metre per metre span 13.74
Cost of 1.00 metre per metre span 1.37
Say 1.35
15.16 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof
metres :
15.16.1 Of sectional area 40 square centimetres and above

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum for every additional height of 1
metre
LABOUR
0103 Blacksmith 2nd class day 0.25 714.00 178.50
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 529.39
Add 1 % Water charges on "W" 5.29
TOTAL 534.68
Add GST on "X" (multiplying factor 0.1405) 75.12
TOTAL 609.80
Add 15% CPOH on "Y" 91.47
TOTAL 701.27
Add Cess @ 1% on "Z" 7.01
Cost of 1.00 cum per metre height 708.29
Say 708.30

15.16.2 Of sectional area below 40 square centimetres

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre for every additional height of 1
metre
LABOUR
0103 Blacksmith 2nd class day 0.01 714.00 7.14
0114 Beldar day 0.02 645.00 12.90
9999 Sundries L.S. 0.39 2.12 0.83
TOTAL 20.87
Add 1 % Water charges on "W" 0.21
TOTAL 21.08
Add GST on "X" (multiplying factor 0.1405) 2.96
TOTAL 24.04
Add 15% CPOH on "Y" 3.61
TOTAL 27.64
Add Cess @ 1% on "Z" 0.28
Cost of 10.00 metre per metre height 27.92
Cost of 1.00 metre per metre height 2.79
Say 2.80
15.17 Dismantling steel work in single sections including dismembering and stacking within 50 metres
lead in:
15.17.1 R.S. Joists

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal
LABOUR
0103 Blacksmith 2nd class day 0.05 714.00 35.70
0100 Bandhani day 0.10 714.00 71.40
0114 Beldar day 0.15 645.00 96.75
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 209.64
Add 1 % Water charges on "W" 2.10
TOTAL 211.73
Add GST on "X" (multiplying factor 0.1405) 29.75
TOTAL 241.48
Add 15% CPOH on "Y" 36.22
TOTAL 277.70
Add Cess @ 1% on "Z" 2.78
Cost of 1.00 quintal 280.48
Cost of 1.00 kg 2.80
Say 2.80

15.17.2 Channels, angles, tees and flats

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal
LABOUR
0103 Blacksmith 2nd class day 0.05 714.00 35.70
0100 Bandhani day 0.05 714.00 35.70
0114 Beldar day 0.10 645.00 64.50
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 141.69
Add 1 % Water charges on "W" 1.42
TOTAL 143.10
Add GST on "X" (multiplying factor 0.1405) 20.11
TOTAL 163.21
Add 15% CPOH on "Y" 24.48
TOTAL 187.69
Add Cess @ 1% on "Z" 1.88
Cost of 1.00 quintal 189.57
Cost of 1.00 kg 1.90
Say 1.90
15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, c
welding etc. including dismembering and stacking within 50
metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal
LABOUR
0103 Blacksmith 2nd class day 0.15 714.00 107.10
0100 Bandhani day 0.10 714.00 71.40
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 4.16 2.12 8.82
TOTAL 348.57
Add 1 % Water charges on "W" 3.49
TOTAL 352.05
Add GST on "X" (multiplying factor 0.1405) 49.46
TOTAL 401.52
Add 15% CPOH on "Y" 60.23
TOTAL 461.75
Add Cess @ 1% on "Z" 4.62
Cost of 1.00 quintal 466.36
Cost of 1.00 kg 4.66
Say 4.65
15.19 Dismantling steel work manually/ by mechanical means in built up sections without dismembering
and stacking within 50 metres lead as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal
LABOUR
0100 Bandhani day 0.10 714.00 71.40
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 238.44
Add 1 % Water charges on "W" 2.38
TOTAL 240.82
Add GST on "X" (multiplying factor 0.1405) 33.84
TOTAL 274.66
Add 15% CPOH on "Y" 41.20
TOTAL 315.86
Add Cess @ 1% on "Z" 3.16
Cost of 1.00 quintal 319.01
Cost of 1.00 kg 3.19
Say 3.20
15.20 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof be
metres

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal for every additional span of 1
metre beyond 10 metre
LABOUR
0100 Bandhani day 0.02 714.00 14.28
0114 Beldar day 0.06 645.00 38.70
9999 Sundries L.S. 0.39 2.12 0.83
TOTAL 53.81
Add 1 % Water charges on "W" 0.54
TOTAL 54.34
Add GST on "X" (multiplying factor 0.1405) 7.64
TOTAL 61.98
Add 15% CPOH on "Y" 9.30
TOTAL 71.28
Add Cess @ 1% on "Z" 0.71
Cost of 1.00 quintal per metre span 71.99
Cost of 1.00 kg per metre span 0.72
Say 0.70
15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof
metres.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal for every additional height of 1
metre beyond 5 metre
LABOUR
0100 Bandhani day 0.02 714.00 14.28
0114 Beldar day 0.06 645.00 38.70
9999 Sundries L.S. 0.39 2.12 0.83
TOTAL 53.81
Add 1 % Water charges on "W" 0.54
TOTAL 54.34
Add GST on "X" (multiplying factor 0.1405) 7.64
TOTAL 61.98
Add 15% CPOH on "Y" 9.30
TOTAL 71.28
Add Cess @ 1% on "Z" 0.71
Cost of 1.00 quintal per metre height 71.99
Cost of 1.00 kg per metre height 0.72
Say 0.70
15.22 Extra for marking of structural steel work required to be re-erected.
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 1 quintal
LABOUR
0130 Mistry day 0.20 784.00 156.80
0114 Beldar day 0.20 645.00 129.00
TOTAL 285.80
Add 1 % Water charges on "W" 2.86
TOTAL 288.66
Add GST on "X" (multiplying factor 0.1405) 40.56
TOTAL 329.21
Add 15% CPOH on "Y" 49.38
TOTAL 378.60
Add Cess @ 1% on "Z" 3.79
Cost of 1.00 quintal 382.38
Cost of 1.00 kg 3.82
Say 3.80
15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.30 714.00 214.20
0114 Beldar day 0.12 645.00 77.40
0115 Coolie day 0.24 645.00 154.80
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 452.19
Add 1 % Water charges on "W" 4.52
TOTAL 456.71
Add GST on "X" (multiplying factor 0.1405) 64.17
TOTAL 520.88
Add 15% CPOH on "Y" 78.13
TOTAL 599.01
Add Cess @ 1% on "Z" 5.99
Cost of 10.00 sqm 605.00
Cost of 1.00 sqm 60.50
Say 60.50

15.23.2 For thickness of tiles above 25 mm and up to 40 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.59 714.00 421.26
0114 Beldar day 0.18 645.00 116.10
0115 Coolie day 0.24 645.00 154.80
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 697.95
Add 1 % Water charges on "W" 6.98
TOTAL 704.93
Add GST on "X" (multiplying factor 0.1405) 99.04
TOTAL 803.97
Add 15% CPOH on "Y" 120.60
TOTAL 924.56
Add Cess @ 1% on "Z" 9.25
Cost of 10.00 sqm 933.81
Cost of 1.00 sqm 93.38
Say 93.40
15.24 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead :

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.25 645.00 161.25
0115 Coolie day 1.00 645.00 645.00
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 812.04
Add 1 % Water charges on "W" 8.12
TOTAL 820.16
Add GST on "X" (multiplying factor 0.1405) 115.23
TOTAL 935.39
Add 15% CPOH on "Y" 140.31
TOTAL 1075.70
Add Cess @ 1% on "Z" 10.76
Cost of 1.00 cum 1086.46
Say 1086.45
15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserv
material within 50 metres lead.
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
LABOUR
0114 Beldar day 1.77 645.00 1141.65
0115 Coolie day 0.75 645.00 483.75
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1642.49
Add 1 % Water charges on "W" 16.42
TOTAL 1658.91
Add GST on "X" (multiplying factor 0.1405) 233.08
TOTAL 1891.99
Add 15% CPOH on "Y" 283.80
TOTAL 2175.79
Add Cess @ 1% on "Z" 21.76
Cost of 10.00 sqm 2197.55
Cost of 1.00 sqm 219.75
Say 219.75
15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable m
50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.54 714.00 385.56
0114 Beldar day 0.16 645.00 103.20
0115 Coolie day 0.24 645.00 154.80
9999 Sundries L.S. 2.47 2.12 5.24
TOTAL 648.80
Add 1 % Water charges on "W" 6.49
TOTAL 655.28
Add GST on "X" (multiplying factor 0.1405) 92.07
TOTAL 747.35
Add 15% CPOH on "Y" 112.10
TOTAL 859.45
Add Cess @ 1% on "Z" 8.59
Cost of 10.00 sqm 868.05
Cost of 1.00 sqm 86.80
Say 86.80
15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 0.25 645.00 161.25
0115 Coolie day 0.62 645.00 399.90
9999 Sundries L.S. 1.04 2.12 2.20
TOTAL 563.35
Add 1 % Water charges on "W" 5.63
TOTAL 568.99
Add GST on "X" (multiplying factor 0.1405) 79.94
TOTAL 648.93
Add 15% CPOH on "Y" 97.34
TOTAL 746.27
Add Cess @ 1% on "Z" 7.46
Cost of 1.00 cum 753.73
Say 753.75
15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
15.28.1 G.S. Sheet

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.50 714.00 357.00
0114 Beldar day 1.00 645.00 645.00
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 1016.33
Add 1 % Water charges on "W" 10.16
TOTAL 1026.49
Add GST on "X" (multiplying factor 0.1405) 144.22
TOTAL 1170.72
Add 15% CPOH on "Y" 175.61
TOTAL 1346.32
Add Cess @ 1% on "Z" 13.46
Cost of 10.00 sqm 1359.79
Cost of 1.00 sqm 135.98
Say 136.00

15.28.2 Asbestos Cement sheet

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 476.60
Add 1 % Water charges on "W" 4.77
TOTAL 481.37
Add GST on "X" (multiplying factor 0.1405) 67.63
TOTAL 549.00
Add 15% CPOH on "Y" 82.35
TOTAL 631.35
Add Cess @ 1% on "Z" 6.31
Cost of 10.00 sqm 637.66
Cost of 1.00 sqm 63.77
Say 63.75
15.29 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for se
including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 cum
LABOUR
0114 Beldar day 1.77 645.00 1141.65
0115 Coolie day 0.75 645.00 483.75
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1642.49
Add 1 % Water charges on "W" 16.42
TOTAL 1658.91
Add GST on "X" (multiplying factor 0.1405) 233.08
TOTAL 1891.99
Add 15% CPOH on "Y" 283.80
TOTAL 2175.79
Add Cess @ 1% on "Z" 21.76
Cost of 1.00 cum 2197.55
Say 2197.55
15.30 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable mate
metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0114 Beldar day 1.19 645.00 767.55
0115 Coolie day 1.21 645.00 780.45
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1565.09
Add 1 % Water charges on "W" 15.65
TOTAL 1580.74
Add GST on "X" (multiplying factor 0.1405) 222.09
TOTAL 1802.83
Add 15% CPOH on "Y" 270.42
TOTAL 2073.26
Add Cess @ 1% on "Z" 20.73
Cost of 10.00 sqm 2093.99
Cost of 1.00 sqm 209.40
Say 209.40
15.31 Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal o
unserviceable material within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0114 Beldar day 1.73 645.00 1115.85
0115 Coolie day 0.25 645.00 161.25
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 1294.19
Add 1 % Water charges on "W" 12.94
TOTAL 1307.13
Add GST on "X" (multiplying factor 0.1405) 183.65
TOTAL 1490.78
Add 15% CPOH on "Y" 223.62
TOTAL 1714.40
Add Cess @ 1% on "Z" 17.14
Cost of 10.00 sqm 1731.54
Cost of 1.00 sqm 173.15
Say 173.15
15.32 Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0114 Beldar day 0.54 645.00 348.30
9999 Sundries L.S. 3.64 2.12 7.72
TOTAL 356.02
Add 1 % Water charges on "W" 3.56
TOTAL 359.58
Add GST on "X" (multiplying factor 0.1405) 50.52
TOTAL 410.10
Add 15% CPOH on "Y" 61.51
TOTAL 471.61
Add Cess @ 1% on "Z" 4.72
Cost of 10.00 sqm 476.33
Cost of 1.00 sqm 47.63
Say 47.65

15.33 Dismantling wooden ballies in posts and struts including stacking within 50metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 50 metre
LABOUR
0114 Beldar day 0.50 645.00 322.50
0115 Coolie day 0.50 645.00 322.50
9999 Sundries L.S. 0.52 2.12 1.10
TOTAL 646.10
Add 1 % Water charges on "W" 6.46
TOTAL 652.56
Add GST on "X" (multiplying factor 0.1405) 91.69
TOTAL 744.25
Add 15% CPOH on "Y" 111.64
TOTAL 855.89
Add Cess @ 1% on "Z" 8.56
Cost of 50.00 metre 864.44
Cost of 1.00 metre 17.29
Say 17.30
15.34 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of con
base of:
15.34.1 T' or 'L' iron or pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each
LABOUR
0114 Beldar day 0.107 645.00 69.02
0115 Coolie day 0.067 645.00 43.22
9999 Excavation, transporting and stacking the posts to the
required place within 50 metres lead, refilling the pit and
dressing the same L.S. 0.26 2.12 0.55
9999 Extra for lifting of R.C.C. posts being heavier than L iron
and cleaning the posts of stacking concrete L.S. 13.39 2.12 28.39
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 144.20
Add 1 % Water charges on "W" 1.44
TOTAL 145.64
Add GST on "X" (multiplying factor 0.1405) 20.46
TOTAL 166.10
Add 15% CPOH on "Y" 24.92
TOTAL 191.02
Add Cess @ 1% on "Z" 1.91
Cost of each 192.93
Say 192.95
15.34.2 R.C.C.
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for each
LABOUR
0114 Beldar day 0.097 645.00 62.57
0115 Coolie day 0.06 645.00 38.70
9999 Sundries L.S. 0.26 2.12 0.55
9999 Excavation, transporting and stacking the posts to the
required place within 50 metres lead, refilling the pit and
dressing the same L.S. 13.39 2.12 28.39
9999 Extra for lifting of R.C.C. posts being heavier than L iron
and cleaning the posts of stacking concrete L.S. 8.06 2.12 17.09
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 153.08
Add 1 % Water charges on "W" 1.53
TOTAL 154.61
Add GST on "X" (multiplying factor 0.1405) 21.72
TOTAL 176.33
Add 15% CPOH on "Y" 26.45
TOTAL 202.78
Add Cess @ 1% on "Z" 2.03
Cost of each 204.81
Say 204.80
15.35 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the sam
metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 ballie (post)
9999 Cutting L.S. 2.73 2.12 5.79
9999 Transporting and stacking L.S. 1.43 2.12 3.03
TOTAL 8.82
Add 1 % Water charges on "W" 0.09
TOTAL 8.91
Add GST on "X" (multiplying factor 0.1405) 1.25
TOTAL 10.16
Add 15% CPOH on "Y" 1.52
TOTAL 11.68
Add Cess @ 1% on "Z" 0.12
Cost of each 11.80
Say 11.80
15.36 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 1 quintal
LABOUR
0114 Beldar day 3.50 645.00 2257.50
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 2268.80
Add 1 % Water charges on "W" 22.69
TOTAL 2291.49
Add GST on "X" (multiplying factor 0.1405) 321.95
TOTAL 2613.44
Add 15% CPOH on "Y" 392.02
TOTAL 3005.46
Add Cess @ 1% on "Z" 30.05
Cost of 1.00 quintal 3035.51
Cost of 1.00 kg 30.36
Say 30.35
15.37 Dismantling wooden trellis work excluding frames but including stacking the serviceable material
within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.10 714.00 71.40
0114 Beldar day 0.25 645.00 161.25
0115 Coolie day 0.25 645.00 161.25
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 399.69
Add 1 % Water charges on "W" 4.00
TOTAL 403.68
Add GST on "X" (multiplying factor 0.1405) 56.72
TOTAL 460.40
Add 15% CPOH on "Y" 69.06
TOTAL 529.46
Add Cess @ 1% on "Z" 5.29
Cost of 10.00 sqm 534.76
Cost of 1.00 sqm 53.48
Say 53.50
15.38 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable m
50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.10 714.00 71.40
0114 Beldar day 0.40 645.00 258.00
0115 Coolie day 0.20 645.00 129.00
9999 Sundries L.S. 4.16 2.12 8.82
TOTAL 467.22
Add 1 % Water charges on "W" 4.67
TOTAL 471.89
Add GST on "X" (multiplying factor 0.1405) 66.30
TOTAL 538.19
Add 15% CPOH on "Y" 80.73
TOTAL 618.92
Add Cess @ 1% on "Z" 6.19
Cost of 10.00 sqm 625.11
Cost of 1.00 sqm 62.51
Say 62.50
15.39 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking
metres lead :
15.39.1 Up to 10 mm thick

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.15 714.00 107.10
0114 Beldar day 0.20 645.00 129.00
0115 Coolie day 0.20 645.00 129.00
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 376.40
Add 1 % Water charges on "W" 3.76
TOTAL 380.16
Add GST on "X" (multiplying factor 0.1405) 53.41
TOTAL 433.58
Add 15% CPOH on "Y" 65.04
TOTAL 498.61
Add Cess @ 1% on "Z" 4.99
Cost of 10.00 sqm 503.60
Cost of 1.00 sqm 50.36
Say 50.35
15.39.2 Thickness above 10 mm up to 25 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.25 645.00 161.25
0115 Coolie day 0.25 645.00 161.25
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 479.63
Add 1 % Water charges on "W" 4.80
TOTAL 484.43
Add GST on "X" (multiplying factor 0.1405) 68.06
TOTAL 552.49
Add 15% CPOH on "Y" 82.87
TOTAL 635.36
Add Cess @ 1% on "Z" 6.35
Cost of 10.00 sqm 641.72
Cost of 1.00 sqm 64.17
Say 64.15

15.39.3 Thickness above 25 mm up to 40 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0112 Carpenter 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.30 645.00 193.50
0115 Coolie day 0.30 645.00 193.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 558.19
Add 1 % Water charges on "W" 5.58
TOTAL 563.77
Add GST on "X" (multiplying factor 0.1405) 79.21
TOTAL 642.98
Add 15% CPOH on "Y" 96.45
TOTAL 739.42
Add Cess @ 1% on "Z" 7.39
Cost of 10.00 sqm 746.82
Cost of 1.00 sqm 74.68
Say 74.70
15.40 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead :
15.40.1 Thickness up to 40 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.20 714.00 142.80
0114 Beldar day 2.00 645.00 1290.00
0115 Coolie day 0.50 645.00 322.50
9999 Sundries L.S. 13.39 2.12 28.39
TOTAL 1783.69
Add 1 % Water charges on "W" 17.84
TOTAL 1801.52
Add GST on "X" (multiplying factor 0.1405) 253.11
TOTAL 2054.64
Add 15% CPOH on "Y" 308.20
TOTAL 2362.83
Add Cess @ 1% on "Z" 23.63
Cost of 10.00 sqm 2386.46
Cost of 1.00 sqm 238.65
Say 238.65
15.40.2 Thickness above 40 mm up to 75 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 sqm
LABOUR
0124 Mason (brick layer) 2nd class day 0.30 714.00 214.20
0114 Beldar day 3.00 645.00 1935.00
0115 Coolie day 0.75 645.00 483.75
9999 Sundries L.S. 18.85 2.12 39.96
TOTAL 2672.91
Add 1 % Water charges on "W" 26.73
TOTAL 2699.64
Add GST on "X" (multiplying factor 0.1405) 379.30
TOTAL 3078.94
Add 15% CPOH on "Y" 461.84
TOTAL 3540.78
Add Cess @ 1% on "Z" 35.41
Cost of 10.00 sqm 3576.19
Cost of 1.00 sqm 357.62
Say 357.60
15.41 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials
of unserviceable materials within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm.
LABOUR
0112 Carpenter 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 347.60
Add 1 % Water charges on "W" 3.48
TOTAL 351.08
Add GST on "X" (multiplying factor 0.1405) 49.33
TOTAL 400.40
Add 15% CPOH on "Y" 60.06
TOTAL 460.46
Add Cess @ 1% on "Z" 4.60
Cost of 10.00 sqm. 465.07
Cost of 1.00 sqm. 46.51
Say 46.50
15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres le
15.42.1 75 to 80 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre
LABOUR
0114 Beldar day 0.36 645.00 232.20
0115 Coolie day 0.36 645.00 232.20
9999 Sundries L.S. 0.91 2.12 1.93
TOTAL 466.33
Add 1 % Water charges on "W" 4.66
TOTAL 470.99
Add GST on "X" (multiplying factor 0.1405) 66.17
TOTAL 537.17
Add 15% CPOH on "Y" 80.58
TOTAL 617.74
Add Cess @ 1% on "Z" 6.18
Cost of 10.00 metre 623.92
Cost of 1.00 metre 62.39
Say 62.40
15.42.2 100 mm dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 metre
LABOUR
0114 Beldar day 0.36 645.00 232.20
0115 Coolie day 0.38 645.00 245.10
9999 Sundries L.S. 1.56 2.12 3.31
TOTAL 480.61
Add 1 % Water charges on "W" 4.81
TOTAL 485.41
Add GST on "X" (multiplying factor 0.1405) 68.20
TOTAL 553.61
Add 15% CPOH on "Y" 83.04
TOTAL 636.66
Add Cess @ 1% on "Z" 6.37
Cost of 10.00 metre 643.02
Cost of 1.00 metre 64.30
Say 64.30

15.42.3 150 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre
LABOUR
0114 Beldar day 0.36 645.00 232.20
0115 Coolie day 0.40 645.00 258.00
9999 Sundries L.S. 2.08 2.12 4.41
TOTAL 494.61
Add 1 % Water charges on "W" 4.95
TOTAL 499.56
Add GST on "X" (multiplying factor 0.1405) 70.19
TOTAL 569.74
Add 15% CPOH on "Y" 85.46
TOTAL 655.20
Add Cess @ 1% on "Z" 6.55
Cost of 10.00 metre 661.76
Cost of 1.00 metre 66.18
Say 66.20
15.43 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable m
50 metres lead as per direction of Engineer-in-charge :
15.43.1 Water bound macadam road

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 36 sqm
Consider a road 6 metres wide and 6 metres length wise
25 cm average depth = 9.00 cubic metre
LABOUR
For cutting road taking out soiling and metalling including
sorting and screening
0114 Beldar day 4.80 645.00 3096.00
0115 Coolie day 2.40 645.00 1548.00
9999 Labour for stacking of serviceable material and disposal of
unserviceable material within 50 metres lead L.S. 89.70 2.12 190.16
TOTAL 4834.16
Add 1 % Water charges on "W" 48.34
TOTAL 4882.51
Add GST on "X" (multiplying factor 0.1405) 685.99
TOTAL 5568.50
Add 15% CPOH on "Y" 835.27
TOTAL 6403.77
Add Cess @ 1% on "Z" 64.04
Cost of 36.00 sqm 6467.81
Cost of 1.00 sqm 179.66
Say 179.65
15.43.2 bituminous road
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 36 sqm
Consider a road 6 metres wide and 6 metres length wise
30 cm average depth =10.80 cubic metre
LABOUR
For cutting road taking out soiling and metalling including
sorting and screening
0114 Beldar day 9.60 645.00 6192.00
0115 Coolie day 4.80 645.00 3096.00
9999 Labour for stacking of serviceable material and disposal of
unserviceable material within 50 metres lead L.S. 107.64 2.12 228.20
TOTAL 9516.20
Add 1 % Water charges on "W" 95.16
TOTAL 9611.36
Add GST on "X" (multiplying factor 0.1405) 1350.40
TOTAL 10961.75
Add 15% CPOH on "Y" 1644.26
TOTAL 12606.02
Add Cess @ 1% on "Z" 126.06
Cost of 36.00 sqm 12732.08
Cost of 1.00 sqm 353.67
Say 353.65
15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ b
means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
15.44.1 15 mm to 40 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre
LABOUR
Trenching and refilling etc
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
9999 Dismantling G.I. pipe and stacking etc L.S. 35.88 2.12 76.07
TOTAL 927.47
Add 1 % Water charges on "W" 9.27
TOTAL 936.74
Add GST on "X" (multiplying factor 0.1405) 131.61
TOTAL 1068.35
Add 15% CPOH on "Y" 160.25
TOTAL 1228.61
Add Cess @ 1% on "Z" 12.29
Cost of 10.00 metre 1240.89
Cost of 1.00 metre 124.09
Say 124.10
15.44.2 Above 40 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 metre
LABOUR
Trenching and refilling etc
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
9999 Dismantling G.I. pipe and stacking etc L.S. 71.76 2.12 152.13
TOTAL 1003.53
Add 1 % Water charges on "W" 10.04
TOTAL 1013.57
Add GST on "X" (multiplying factor 0.1405) 142.41
TOTAL 1155.97
Add 15% CPOH on "Y" 173.40
TOTAL 1329.37
Add Cess @ 1% on "Z" 13.29
Cost of 10.00 metre 1342.66
Cost of 1.00 metre 134.27
Say 134.25
15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m
breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead
direction of Engineer-in- charge:
15.45.1 Up to 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x0.55x0.75 m =16.61cum
Deduct for pipes of average 100 mm dia
=1x40.26x(22/7)/4x(0.118)x(0.118) =0.44cum
Total =16.17cum
LABOUR
2.8.1 Rate as per Item No.2.8.1 of SH: EARTH WORK cum 16.17 286.85 4638.36
2.25 Rate as per Item No.2.25 of SH: EARTH WORK cum 16.17 253.95 4106.37
0761 Fuel wood quintal 0.46 500.00 230.00
0771 Kerosene oil litre 0.38 50.00 19.00
0117 Assistant Fitter or 2nd class Fitter day 0.63 714.00 449.82
0114 Beldar day 4.50 645.00 2902.50
9977 Carriage L.S. 53.82 2.12 114.10
TOTAL 12460.15
Add 1 % Water charges on "W-A" 37.15
TOTAL 12497.31
Add GST on "X-A" (multiplying factor 0.1405) 527.24
TOTAL 13024.55
Add 15% CPOH on "Y-A" 641.97
TOTAL 13666.52
Add Cess @ 1% on "Z-A" 49.22
Cost of 40.26 metre 13715.73
Cost of 1.00 metre 340.68
Say 340.70

15.45.2 Above 150 mm dia up to 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
1x40.26x0.65x0.75 m =19.63cum
Deduct for pipes of average 250 mm dia
=1x40.26x(22/7)/4x(0.274)x(0.274) =2.37cum
Total =17.26cum LABOUR
Rate as per Item No.2.8.1 of SH: EARTH WORK Rate as per Item 4951.03
No.2.25 of SH: EARTH WORK Fuel wood 4383.18
Kerosene oil 515.00
Assistant Fitter or 2nd class Fitter Beldar 57.00
Carriage TOTAL 928.20
Add 1 % Water charges on "W-A" TOTAL 4837.50
2.8.1 Add GST on "X-A" (multiplying factor 0.1405) 17.26 286.85
171.15
2.25 TOTAL 17.26 253.95
15843.06
0761 Add 15% CPOH on "Y-A" TOTAL cum cum quintal 1.03 500.00
65.09
0771 Add Cess @ 1% on "Z-A" Cost of 40.26 metre litre day day 1.14 50.00
15908.14
0117 Cost of 1.00 metre L.S. 1.30 714.00
923.64
0114 Say 7.50 645.00
16831.78
9977 80.73 2.12
1124.64
17956.42
86.22
18042.64
448.15
448.15

15.45.3 Above 300 mm diameter


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
1x40.26x0.85x0.75 m =25.67cum
Deduct for pipes of average 450 mm dia
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
Total =18.38cum LABOUR
Rate as per Item No.2.8.1 of SH: EARTH WORK Rate as per Item
No.2.25 of SH: EARTH WORK Fuel wood 5272.30
Kerosene oil 4667.60
Assistant Fitter or 2nd class Fitter Beldar 700.00
Carriage and sundries TOTAL 113.50
Add 1 % Water charges on "W-A" TOTAL 1606.50
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 7417.50
2.8.1 18.38 286.85
Add 15% CPOH on "Y-A" TOTAL 285.25
2.25 18.38 253.95
Add Cess @ 1% on "Z-A" Cost of 40.26 metre 20062.65
0761 cum cum quintal 1.40 500.00
Cost of 1.00 metre 101.23
0771 litre day day 2.27 50.00
Say 20163.88
0117 L.S. 2.25 714.00
1436.47
0114 11.50 645.00
21600.35
9988 134.55 2.12
1749.07
23349.41
134.10
23483.51
583.30
583.30
15.46 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ b
means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metr
direction of Engineer- in-charge :
15.46.1 Up to 600 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
1x40.26x1.30x1.65 m =86.36cum
Deduct for pipes of average 450 mm dia
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
Total=79.07cum LABOUR
Beldar Coolie Bhisti Fuel wood
Kerosene oil 3431.40
Assistant Fitter or 2nd class Fitter Beldar 3521.70
Carriage and sundries TOTAL 221.34
Add 1 % Water charges on "W" TOTAL 700.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 113.50
Add 15% CPOH on "Y" TOTAL 1606.50
0114 5.32 645.00
Add Cess @ 1% on "Z" Cost of 40.26 metre Cost of 1.00 metre 7417.50
0115 5.46 645.00
Say 285.25
0101 0.31 714.00
day day day 17297.19
0761 1.40 500.00
quintal litre day 172.97
0771 2.27 50.00
day L.S. 17470.16
0117 2.25 714.00
2454.56
0114 11.50 645.00
19924.72
9988 134.55 2.12
2988.71
22913.42
229.13
23142.56
574.83
574.85

15.46.2 Above 600 mm diameter


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
1x40.26x1.30x1.65 m =86.36cum
Deduct for pipes of average 900 mm dia
=1x40.26x(22/7)/4x(1.00)x(1.00) =31.63cum
Total=54.73cum LABOUR
Beldar Coolie Bhisti Fuel wood
Kerosene oil 10203.90
Assistant Fitter or 2nd class Fitter Beldar 10481.25
Carriage and sundries TOTAL 664.02
Add 1 % Water charges on "W" TOTAL 1540.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 250.00
Add 15% CPOH on "Y" TOTAL 7140.00
0114 15.82 645.00
Add Cess @ 1% on "Z" Cost of 40.26 metre Cost of 1.00 metre 12900.00
0115 16.25 645.00
Say 380.33
0101 0.93 714.00
day day day 43559.50
0761 3.08 500.00
quintal litre day 435.59
0771 5.00 50.00
day L.S. 43995.09
0117 10.00 714.00
6181.31
0114 20.00 645.00
50176.40
9988 179.40 2.12
7526.46
57702.86
577.03
58279.89
1447.59
1447.60

15.47 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes man
mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge :
15.47.1 Up to 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
10.00x0.55x0.75 m =4.125cum
Deduct for pipes of average 100 mm dia
=1x10x(22/7)/4x(0.118)x(0.118) =0.109cum
Total=4.016cum LABOUR
Beldar Coolie Bhisti Beldar Coolie 748.20
Carriage and sundries TOTAL 767.55
Add 1 % Water charges on "W" TOTAL 49.98
Add GST on "X" (multiplying factor 0.1405) TOTAL 232.20
Add 15% CPOH on "Y" TOTAL 245.10
Add Cess @ 1% on "Z" Cost of 10.00 metre Cost of 1.00 metre 3.31
0114 Say 1.16 645.00
2046.34
0115 1.19 645.00
day day day 20.46
0101 0.07 714.00
day day 2066.80
0114 0.36 645.00
L.S. 290.39
0115 0.38 645.00
2357.19
9988 1.56 2.12
353.58
2710.76
27.11
2737.87
273.79
273.80
15.47.2 Above 150 mm diameter
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of
excavated earth
10.00x0.65x0.75 m =4.88cum
Deduct for pipes of average 250 mm dia
=1x10x(22/7)/4x(0.274)x(0.274) =0.590cum
Total=4.29cum LABOUR
Beldar Coolie Bhisti Beldar Coolie
Carriage and sundries TOTAL 799.80
Add 1 % Water charges on "W" TOTAL 825.60
Add GST on "X" (multiplying factor 0.1405) TOTAL 49.98
Add 15% CPOH on "Y" TOTAL 232.20
Add Cess @ 1% on "Z" Cost of 10.00 metre Cost of 1.00 metre 567.60
Say 7.99
0114 1.24 645.00
2483.17
0115 1.28 645.00
24.83
0101 day day day day 0.07 714.00
2508.00
0114 day L.S. 0.36 645.00
352.37
0115 0.88 645.00
2860.38
9988 3.77 2.12
429.06
3289.44
32.89
3322.33
332.23
332.25

15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. wor
by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead a
direction of Engineer-
in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Details of cost for 1 man hole day day L.S. 0.50 645.00 322.50
0115 Demolition of R.C.C. slab 1.3x1.2x0.15 m =0.234cum Less cover L.S. 0.14 645.00 90.30
9999 0.61x0.455x0.15 m =0.042cum 1.30 2.12 2.76
9999 Net Quantity =0.192cum LABOUR 7.15 2.12 15.16
Beldar Coolie 430.71
Removel of C.I. Cover with frame including stacking Sundries 4.31
TOTAL 435.02
Add 1 % Water charges on "W" TOTAL 61.12
Add GST on "X" (multiplying factor 0.1405) TOTAL 496.14
Add 15% CPOH on "Y" TOTAL 74.42
Add Cess @ 1% on "Z" Cost of each 570.56
Say 5.71
576.27
576.25

15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of
manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 me
per
direction of Engineer-in-charge.
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 1 man hole Demolition of R.C.C. slab 1.1x0.9x0.15
m =0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.106cum Say 0.11cum LABOUR
Beldar Coolie
Removel of C.I. Cover with frame including stacking Sundries
TOTAL 187.05
Add 1 % Water charges on "W" TOTAL 51.60
Add GST on "X" (multiplying factor 0.1405) TOTAL 1.38
Add 15% CPOH on "Y" TOTAL 11.30
Add Cess @ 1% on "Z" Cost of each 251.33
0114 Say 0.29 645.00 2.51
0115 day day L.S. 0.08 645.00 253.84
9999 L.S. 0.65 2.12 35.66
9999 5.33 2.12 289.51
43.43
332.93
3.33
336.26
336.25

15.50 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, re
excavated gap, stacking the useful materials near the site and
disposal of unserviceable materials within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for each Dismantling cement concrete
1:4:8 0.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x(0.450)x(0.450)x
1.10 m =0.175cum
=0.919cum Say 0.92cum Dismantling cement concrete
1:2:4 0.90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m=0.024cum
=0.098cum Say 0.10cum LABOUR
Beldar Coolie Sundries Beldar Coolie Sundries Mistry
Mason (brick layer) 1st class Mason (brick layer) 2nd class
Bandhani 522.45
Beldar 328.95
Sundries for scaffolding etc TOTAL 3.86
Add 1 % Water charges on "W" TOTAL 103.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 45.15
0114 Add 15% CPOH on "Y" TOTAL 0.81 645.00 1.10
0115 Add Cess @ 1% on "Z" Cost of each 0.51 645.00 196.00
9999 Say 1.82 2.12 94.08
0114 0.16 645.00 85.68
0115 day day L.S. 0.07 645.00 714.00
9999 day day L.S. 0.52 2.12 645.00
0130 day day day day 0.25 784.00 114.10
0123 day L.S. 0.12 784.00 2853.57
0124 0.12 714.00 28.54
0100 1.00 714.00 2882.10
0114 1.00 645.00 404.94
9999 53.82 2.12 3287.04
493.06
3780.10
37.80
3817.90
3817.90

15.51 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful mater
site and disposal of unserviceable materials within 50 metres
lead including refilling the excavated gap.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Detail of cost for one chamber Dismantling cement concrete day day L.S. 0.14 645.00 90.30
0115 a) 1:5:10 1.05x1.00x0.15m =0.16cum day day L.S. 0.09 645.00 58.05
9999 Dismantling brick work in cement mortar 2.70x0.20x0.45m day day L.S. 0.26 2.12 0.55
0114 =0.24cum L.S. 0.25 645.00 161.25
0115 Dismantling cement concrete 0.22 645.00 141.90
9999 b) 1:2:4 2.70x0.20x0.15m =0.08cum LABOUR 0.52 2.12 1.10
0114 Beldar Coolie Sundries Beldar Coolie Sundries Beldar Coolie 0.13 645.00 83.85
0115 Sundries for scaffolding etc Dismantling C.I. Grating TOTAL 0.06 645.00 38.70
9999 Add 1 % Water charges on "W" TOTAL 0.39 2.12 0.83
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 7.15 2.12 15.16
Add 15% CPOH on "Y" TOTAL 591.69
Add Cess @ 1% on "Z" Cost of each 5.92
Say 597.61
83.96
681.57
102.24
783.80
7.84
791.64
791.65

15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site
of unserviceable materials within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for each LABOUR day day L.S. 0.25 784.00 196.00
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.50 645.00 322.50
9999 Add 1 % Water charges on "W" TOTAL 17.94 2.12 38.03
Add GST on "X" (multiplying factor 0.1405) TOTAL 556.53
Add 15% CPOH on "Y" TOTAL 5.57
Add Cess @ 1% on "Z" Cost of each 562.10
Say 78.97
641.07
96.16
737.23
7.37
744.61
744.60

15.53 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
15.53.1 Up to 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for dismantling 10 sluice valves (ave.) 100mm day day day 0.60 784.00 470.40
0117 LABOUR L.S. 0.40 714.00 285.60
0114 Fitter (grade 1) 1.60 645.00 1032.00
9999 Assistant Fitter or 2nd class Fitter Beldar 89.70 2.12 190.16
Sundries for removing the R.C.C. cover etc for dismantling sluice 1978.16
valve 19.78
TOTAL 1997.95
Add 1 % Water charges on "W" TOTAL

Add GST on "X" (multiplying factor 0.1405) TOTAL 280.71


Add 15% CPOH on "Y" TOTAL 2278.66
Add Cess @ 1% on "Z" Cost of 10 Nos 341.80
Cost of each 2620.46
Say 26.20
2646.66
264.67
264.65

15.53.2 Above 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for dismantling 10 sluice valves (ave.) 250mm day day day 2.40 784.00 1881.60
0117 LABOUR L.S. 1.54 714.00 1099.56
0114 Fitter (grade 1) 6.40 645.00 4128.00
9999 Assistant Fitter or 2nd class Fitter Beldar 89.70 2.12 190.16
Sundries for removing the R.C.C. cover etc for dismantling sluice 7299.32
valve 72.99
TOTAL 7372.32
Add 1 % Water charges on "W" TOTAL 1035.81
Add GST on "X" (multiplying factor 0.1405) TOTAL 8408.13
Add 15% CPOH on "Y" TOTAL 1261.22
Add Cess @ 1% on "Z" Cost of 10 Nos 9669.35
Cost of each 96.69
Say 9766.04
976.60
976.60

15.54 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for 10 Nos LABOUR day day day 1.50 784.00 1176.00
0117 Fitter (grade 1) 1.00 714.00 714.00
0114 Assistant Fitter or 2nd class Fitter Beldar 4.00 645.00 2580.00
TOTAL 4470.00
Add 1 % Water charges on "W" TOTAL 44.70
Add GST on "X" (multiplying factor 0.1405) TOTAL 4514.70
Add 15% CPOH on "Y" TOTAL 634.32
Add Cess @ 1% on "Z" Cost of 10 Nos 5149.02
Cost of each 772.35
Say 5921.37
59.21
5980.58
598.06
598.05

15.55 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful m
the site and disposal of unserviceable materials within 50 metres lead :
15.55.1 120 x 120 cm (outside to outside)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one platform Dismantling cement concrete 1:5:10
4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
=0.216cum Say 0.22cum
Dismantling brick work in cement mortar 4.00x0.20x0.30m
=0.24cum
4.00x0.10x0.20m =0.088cum

=0.328cum Say 0.33cum


Dismantling 40 mm C.C. flooring 1:2:4
1.00x1.00x0.04m =0.04cum
LABOUR
0114 Beldar day 0.19 645.00 122.55
0115 Coolie day 0.12 645.00 77.40
9999 Sundries L.S. 0.39 2.12 0.83
0114 Beldar day 0.35 645.00 225.75
0115 Coolie day 0.30 645.00 193.50
9999 Sundries L.S. 0.91 2.12 1.93
0114 Beldar day 0.06 645.00 38.70
0115 Coolie day 0.03 645.00 19.35
9999 Sundries for scaffolding etc L.S. 0.13 2.12 0.28
TOTAL 680.28
Add 1 % Water charges on "W" 6.80
TOTAL 687.08
Add GST on "X" (multiplying factor 0.1405) 96.54
TOTAL 783.62
Add 15% CPOH on "Y" 117.54
TOTAL 901.16
Add Cess @ 1% on "Z" 9.01
Cost of each 910.17
Say 910.15

15.55.2 210 x 120 cm (outside to outside)

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one platform
Dismantling cement concrete 1:5:10
5.80x0.35x0.12m =0.243cum
0.80x1.70x0.075m =0.102cum
=0.345cum Say 0.35cum
Dismantling brick work in cement mortar
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
=0.472cum Say 0.47cum
Dismantling 40 mm C.C. flooring 1:2:4
1.90x1.00x0.04m =0.08cum
LABOUR
0114 Beldar day 0.31 645.00 199.95
0115 Coolie day 0.19 645.00 122.55
9999 Sundries L.S. 0.65 2.12 1.38
0114 Beldar day 0.50 645.00 322.50
0115 Coolie day 0.42 645.00 270.90
9999 Sundries L.S. 1.30 2.12 2.76
0114 Beldar day 0.13 645.00 83.85
0115 Coolie day 0.06 645.00 38.70
9999 Sundries for scaffolding etc L.S. 0.39 2.12 0.83
TOTAL 1043.41
Add 1 % Water charges on "W" 10.43
TOTAL 1053.84
Add GST on "X" (multiplying factor 0.1405) 148.07
TOTAL 1201.91
Add 15% CPOH on "Y" 180.29
TOTAL 1382.20
Add Cess @ 1% on "Z" 13.82
Cost of each 1396.02
Say 1396.00

15.55.3 320 x 120 cm (outside to outside)


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one platform Dismantling cement concrete 1:5:10
8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
=0.504cum Say 0.50cum
Dismantling brick work in cement mortar
0114 8.00x0.20x0.30m =0.48cum day day L.S. 0.44 645.00 283.80
0115 8.40x0.10x0.20m =0.168cum day day L.S. 0.28 645.00 180.60
9999 =0.648cum Say 0.65cum day day L.S. 0.91 2.12 1.93
0114 Dismantling 40 mm C.C. flooring 1:2:4 3.00x1.00x0.04m =0.12cum 0.69 645.00 445.05
0115 LABOUR 0.59 645.00 380.55
9999 Beldar Coolie Sundries Beldar Coolie Sundries Beldar Coolie 1.56 2.12 3.31
0114 Sundries for scaffolding etc TOTAL 0.19 645.00 122.55
0115 Add 1 % Water charges on "W" TOTAL 0.09 645.00 58.05
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.52 2.12 1.10
Add 15% CPOH on "Y" TOTAL 1476.94
Add Cess @ 1% on "Z" Cost of each 14.77
Say 1491.71
209.59
1701.29
255.19
1956.49
19.56
1976.05
1976.05

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish t
ground within 50 metres lead.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Detail of cost for 10 sqm LABOUR day day day 0.36 645.00 232.20
0115 Beldar Coolie Bhisti L.S. 0.08 645.00 51.60
0101 Sundries for scaffolding etc TOTAL 0.07 714.00 49.98
9999 Add 1 % Water charges on "W" TOTAL 1.43 2.12 3.03
Add GST on "X" (multiplying factor 0.1405) TOTAL 336.81
Add 15% CPOH on "Y" TOTAL 3.37
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm 340.18
Say 47.80
387.97
58.20
446.17
4.46
450.63
45.06
45.05

15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unser
material and stacking of serviceable material with in 50 meters
lead as directed by Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0112 Detail of cost for 10 sqm LABOUR day day L.S. 0.20 714.00 142.80
0114 Carpenter 2nd class Beldar 0.30 645.00 193.50
9999 Sundries TOTAL 5.38 2.12 11.41
Add 1 % Water charges on "W" TOTAL 347.71
Add GST on "X" (multiplying factor 0.1405) TOTAL 3.48
Add 15% CPOH on "Y" TOTAL 351.18
Add Cess @ 1% on "Z" 49.34
400.52
60.08
460.60
4.61

Cost of 10.00 sqm Cost of 1.00 sqm Say 465.21


46.52
46.50

15.58 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled ma
lead of 1 kilometre, stacking serviceable and unserviceable
material separately including cutting reinforcement bars.

Code Description Unit Quantity Rate Rs. Amount Rs.


0128 Details of cost for 1 cum LABOUR day 0.03 714.00 21.42
0139 Mate day day 0.50 714.00 357.00
0114 Labour for operating pneumatic tools Skilled Beldar (for floor rubbing day day 0.50 645.00 322.50
0103 etc.) Beldar day day day 0.50 714.00 357.00
0114 Labour for cutting reinforcement bars. Blacksmith 2nd class 0.50 645.00 322.50
0040 Beldar MACHINERY 0.125 1600.00 200.00
0039 Air compressor 250 cfm with two leads for pneumatic cutters/ 0.05 1200.00 60.00
0041 hammers. 0.125 800.00 100.00
Tractor with trolley . 1740.42
Joint cutting machine with 2-3 blades TOTAL 17.40
Add 1 % Water charges on "W" TOTAL 1757.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 246.97
Add 15% CPOH on "Y" TOTAL 2004.80
Add Cess @ 1% on "Z" Cost of 1 cum 300.72
Say 2305.52
23.06
2328.57
2328.55

15.59 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to
kilometre, as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0128 Details of cost for 1 cum LABOUR day day 0.01 714.00 7.14
0114 Mate Beldar day day 0.30 645.00 193.50
0039 MACHINERY 0.0475 1200.00 57.00
0038 Tractor with trolley . 0.002 1200.00 2.40
Tractor with ripper attachment. TOTAL 260.04
Add 1 % Water charges on "W" TOTAL 2.60
Add GST on "X" (multiplying factor 0.1405) TOTAL 262.64
Add 15% CPOH on "Y" TOTAL 36.90
Add Cess @ 1% on "Z" Cost of 1 cum 299.54
Say 44.93
344.47
3.44
347.92
347.90

15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, inclu
transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for
including all lifts involved.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum
2264 Carriage of Rubbish cum 1.00 163.93 163.93

TOTAL 163.93
Add 1 % Water charges on "W" 1.64
TOTAL 165.57
Add GST on "X" (multiplying factor 0.1405) 23.26
TOTAL 188.83
Add 15% CPOH on "Y" 28.32
TOTAL 217.16
Add Cess @ 1% on "Z" 2.17
Cost of 1 cum 219.33
Say 219.35
SUB HEAD : 16.0
ROAD WORK
909
SUB HEAD : 16.0
ROAD WORK
909

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after
excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulati
re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
(A) preparation of subgrade.
Earth work in excavation including dressing etc.
100sqm.x22.5cm (average depth) = 22.5cum.
LABOUR
0128 Mate day 1.80 714.00 1285.20
0115 Coolie day 18.00 645.00 11610.00
0114 Beldar day 0.27 645.00 174.15
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.054 3000.00 162.00
0113 Chowkidar day 0.054 645.00 34.83
9999 Sundries L.S. 6.76 2.12 14.33
(B) Conslidation of subgrade
Roller charges (one roller does 1860 sqm. of conosolidation of
sub - grade with road roller of 8 to 12 tonne capacity including
making good the undulations etc. with earth or quarry spoils etc.
and rerolling the subgrade
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.054 3000.00 162.00
0113 Chowkidar day 0.054 645.00 34.83
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 13491.67
Add 1 % Water charges on "W" 134.92
TOTAL 13626.59
Add GST on "X" (multiplying factor 0.1405) 1914.54
TOTAL 15541.12
Add 15% CPOH on "Y" 2331.17
TOTAL 17872.29
Add Cess @ 1% on "Z" 178.72
Cost for 100 sqm. 18051.02
Cost per sqm. 180.51
Say 180.50
16.2 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dr
(proctor density).

Code Description Unit Quantity Rate Rs. Amount Rs.


LABOUR
(Extra to item No.2.3 in Earth work)
0101 Bhisti day 0.17 714.00 121.38
Roller charges (one roller does 1860sqm. Of consolidation per
day of 8 hours and uses 18 litres diesel)
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.008 3000.00 24.00
0113 Chowkidar day 0.008 645.00 5.16
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 153.57
Add 1 % Water charges on "W" 1.54
TOTAL 155.11
Add GST on "X" (multiplying factor 0.1405) 21.79
TOTAL 176.90
Add 15% CPOH on "Y" 26.53
TOTAL 203.43
Add Cess @ 1% on "Z" 2.03
Cost of 10 cum. 205.47
Cost per cum. 20.55
Say 20.55
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2901 Stone Aggregate (Single size) : 100 mm nominal size cum 0.10 1360.00 136.00
2902 Stone Aggregate (Single size) : 80 mm nominal size cum 0.65 1360.00 884.00
0291 Stone Aggregate (Single size) : 63 mm nominal size cum 0.25 1000.00 250.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 1.00 178.19 178.19
TOTAL 1448.19
Add 1 % Water charges on "W" 14.48
TOTAL 1462.67
Add GST on "X" (multiplying factor 0.1405) 205.51
TOTAL 1668.18
Add 15% CPOH on "Y" 250.23
TOTAL 1918.40
Add Cess @ 1% on "Z" 19.18
Cost for 1 cum 1937.59
Say 1937.60

16.3.2 63 mm to 45 mm size stone aggregate

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2902 Stone Aggregate (Single size) : 80 mm nominal size cum 0.10 1360.00 136.00
0291 Stone Aggregate (Single size) : 63 mm nominal size cum 0.65 1000.00 650.00
0292 Stone Aggregate (Single size) : 50 mm nominal size cum 0.25 1000.00 250.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 1.00 178.19 178.19
TOTAL 1214.19
Add 1 % Water charges on "W" 12.14
TOTAL 1226.33
Add GST on "X" (multiplying factor 0.1405) 172.30
TOTAL 1398.63
Add 15% CPOH on "Y" 209.79
TOTAL 1608.43
Add Cess @ 1% on "Z" 16.08
Cost for 1 cum 1624.51
Say 1624.50

16.3.3 53 mm to 22.4 mm size stone aggregate


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 cum.
MATERIAL
0291 Stone Aggregate (Single size) : 63 mm nominal size cum 0.05 1000.00 50.00
0292 Stone Aggregate (Single size) : 50 mm nominal size cum 0.30 1000.00 300.00
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 1300.00 845.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 1.00 178.19 178.19
TOTAL 1373.19
Add 1 % Water charges on "W" 13.73
TOTAL 1386.92
Add GST on "X" (multiplying factor 0.1405) 194.86
TOTAL 1581.78
Add 15% CPOH on "Y" 237.27
TOTAL 1819.05
Add Cess @ 1% on "Z" 18.19
Cost for 1 cum 1837.24
Say 1837.25
16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum 1.00 550.00 550.00
2260 Carriage of Brick aggregate cum 1.00 178.19 178.19
TOTAL 728.19
Add 1 % Water charges on "W" 7.28
TOTAL 735.47
Add GST on "X" (multiplying factor 0.1405) 103.33
TOTAL 838.81
Add 15% CPOH on "Y" 125.82
TOTAL 964.63
Add Cess @ 1% on "Z" 9.65
Cost for 1 cum 974.27
Say 974.25

16.3.5 Over burnt (Jhama) brick aggregate 90 mm to 45 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum 1.00 600.00 600.00
2260 Carriage of Brick aggregate cum 1.00 178.19 178.19
TOTAL 778.19
Add 1 % Water charges on "W" 7.78
TOTAL 785.97
Add GST on "X" (multiplying factor 0.1405) 110.43
TOTAL 896.40
Add 15% CPOH on "Y" 134.46
TOTAL 1030.86
Add Cess @ 1% on "Z" 10.31
Cost for 1 cum 1041.17
Say 1041.15

16.3.6 Stone screening 13.2 mm nominal size (Type A)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 0.05 1200.00 60.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.80 1200.00 960.00
2903 Stone chippings/ screenings 4.75 mm nominal size cum 0.15 1400.00 210.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.00 163.93 163.93
TOTAL 1393.93
Add 1 % Water charges on "W" 13.94
TOTAL 1407.87
Add GST on "X" (multiplying factor 0.1405) 197.81
TOTAL 1605.67
Add 15% CPOH on "Y" 240.85
TOTAL 1846.53
Add Cess @ 1% on "Z" 18.47
Cost for one cum. 1864.99
Say 1865.00
16.3.7 Stone screening 11.2 mm nominal size (Type B)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.10 1200.00 120.00
2903 Stone chippings/ screenings 4.75 mm nominal size cum 0.75 1400.00 1050.00
2904 Stone chippings/ screenings 150 micron nominal size cum 0.15 1400.00 210.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.85 163.93 139.34
2267 Carriage of Stone dust cum 0.15 163.93 24.59
TOTAL 1543.93
Add 1 % Water charges on "W" 15.44
TOTAL 1559.37
Add GST on "X" (multiplying factor 0.1405) 219.09
TOTAL 1778.46
Add 15% CPOH on "Y" 266.77
TOTAL 2045.23
Add Cess @ 1% on "Z" 20.45
Cost for one cum. 2065.68
Say 2065.70

16.3.8 Red bajri

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
0304 Bajri cum 1.00 1000.00 1000.00
2311 Carriage of Red bajri cum 1.00 163.93 163.93
TOTAL 1163.93
Add 1 % Water charges on "W" 11.64
TOTAL 1175.57
Add GST on "X" (multiplying factor 0.1405) 165.17
TOTAL 1340.74
Add 15% CPOH on "Y" 201.11
TOTAL 1541.85
Add Cess @ 1% on "Z" 15.42
Cost for one cum. 1557.27
Say 1557.25

16.3.9 Good earth

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
Excavation :
LABOUR
0114 Beldar day 0.177 645.00 114.17
0115 Coolie day 0.167 645.00 107.72
0979 Royalty for good earth cum 1.00 40.00 40.00
2241 Carriage of Good earth cum 1.00 204.92 204.92
by mechanical transport upto 5 km lead
TOTAL 466.80
Add 1 % Water charges on "W" 4.67
TOTAL 471.47
Add GST on "X" (multiplying factor 0.1405) 66.24
TOTAL 537.71
Add 15% CPOH on "Y" 80.66
TOTAL 618.37
Add Cess @ 1% on "Z" 6.18
Cost per cum. 624.55
Say 624.55
16.3.10 Moorum
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 cum.
MATERIAL
0810 Moorum cum 1.00 500.00 500.00
2265 Carriage of Moorum cum 1.00 163.93 163.93
TOTAL 663.93
Add 1 % Water charges on "W" 6.64
TOTAL 670.57
Add GST on "X" (multiplying factor 0.1405) 94.21
TOTAL 764.78
Add 15% CPOH on "Y" 114.72
TOTAL 879.50
Add Cess @ 1% on "Z" 8.80
Cost for one cum. 888.30
Say 888.30
16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pickin
with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of scr
binding material to fill up
interstices of coarse aggregate, watering and compacting to the required density .

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum
LABOUR
0114 Beldar day 0.26 645.00 167.70
0115 Coolie day 0.26 645.00 167.70
0101 Bhisti day 0.26 714.00 185.64
Roller charges (one roller does 30 cum consolidation per day of
8 hours and uses 18 litres of diesel oil).
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.033 3000.00 99.00
0113 Chowkidar day 0.033 645.00 21.29
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 647.11
Add 1 % Water charges on "W" 6.47
TOTAL 653.58
Add GST on "X" (multiplying factor 0.1405) 91.83
TOTAL 745.41
Add 15% CPOH on "Y" 111.81
TOTAL 857.22
Add Cess @ 1% on "Z" 8.57
Cost for 1 cum 865.80
Say 865.80
16.5 Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting and
template and consolidation with light power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be made separately
16.5.1 Over burnt (Jhama) brick aggregate 120 mm to 40 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
LABOUR
0114 Beldar day 0.35 645.00 225.75
0115 Coolie day 0.26 645.00 167.70
0101 Bhisti Day 0.18 714.00 128.52
Roller charges (one roller does 230cum.
consolidation per day of 8 hours and uses 18 litres of diesel oil)
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.004 3000.00 12.00
0113 Chowkidar day 0.004 645.00 2.58
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 542.34
Add 1 % Water charges on "W" 5.42
TOTAL 547.76
Add GST on "X" (multiplying factor 0.1405) 76.96
TOTAL 624.72
Add 15% CPOH on "Y" 93.71
TOTAL 718.43
Add Cess @ 1% on "Z" 7.18
Cost for one cum. 725.61
Say 725.60
16.5.2 Over burnt (Jhama) brick aggregate 90 mm to 45 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
LABOUR
0114 Beldar day 0.35 645.00 225.75
0115 Coolie day 0.26 645.00 167.70
0101 Bhisti day 0.18 714.00 128.52
Roller charges (one roller does 230cum.
consolidation per day of 8 hours and uses 18 litres of diesel oil)
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.004 3000.00 12.00
0113 Chowkidar day 0.004 645.00 2.58
9999 Sundries L.S. 2.73 2.12 5.79
TOTAL 542.34
Add 1 % Water charges on "W" 5.42
TOTAL 547.76
Add GST on "X" (multiplying factor 0.1405) 76.96
TOTAL 624.72
Add 15% CPOH on "Y" 93.71
TOTAL 718.43
Add Cess @ 1% on "Z" 7.18
Cost for one cum. 725.61
Say 725.60

16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and
16.6.1 With road roller/ hand roller

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 6 mm thick and 100 sqm area
(A) Supplying and stacking of Red bajri at site.
MATERIAL
0304 Bajri cum 0.60 1000.00 600.00
2311 Carriage of Red bajri cum 0.60 163.93 98.36
(B) Spreading of red bajri
LABOUR
0114 Beldar day 0.54 645.00 348.30
0101 Bhisti day 0.54 714.00 385.56
Roller charges (one roller does 1860sqm.
consolidation per day of 8 hours and uses 18 litres of diesel oil)
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.054 3000.00 162.00
0113 Chowkidar day 0.054 645.00 34.83
TOTAL 1629.05
Add 1 % Water charges on "W" 16.29
TOTAL 1645.34
Add GST on "X" (multiplying factor 0.1405) 231.17
TOTAL 1876.51
Add 15% CPOH on "Y" 281.48
TOTAL 2157.98
Add Cess @ 1% on "Z" 21.58
Cost for 100 sqm. 2179.56
Cost per sqm. 21.80
Say 21.80
16.7 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of
surplus earth lead upto 50 metres.
16.7.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
2602 Common burnt clay F.P.S. (non modular) bricks class
designation 7.5 1000 Nos 0.16 4590.00 734.40
including 12% wastage
2201 Carriage of Bricks 1000 Nos 0.16 437.15 69.94
LABOUR
0123 Mason (brick layer) 1st class day 0.17 784.00 133.28
0124 Mason (brick layer) 2nd class day 0.17 714.00 121.38
0115 Coolie day 0.35 645.00 225.75
9999 Removal of rubbish L.S. 17.94 2.12 38.03
9999 Sundries L.S. 8.97 2.12 19.02
TOTAL 1341.80
Add 1 % Water charges on "W" 13.42
TOTAL 1355.22
Add GST on "X" (multiplying factor 0.1405) 190.41
TOTAL 1545.63
Add 15% CPOH on "Y" 231.84
TOTAL 1777.47
Add Cess @ 1% on "Z" 17.77
Cost for 10 metres 1795.25
Cost per metre 179.52
Say 179.50
16.8 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 met
16.8.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
2602 Common burnt clay F.P.S. (non modular) bricks class
designation 7.5 1000 Nos 0.049 4590.00 224.91
including 12% wastage
2201 Carriage of Bricks 1000 Nos 0.049 437.15 21.42
LABOUR
0123 Mason (brick layer) 1st class day 0.04 784.00 31.36
0124 Mason (brick layer) 2nd class day 0.04 714.00 28.56
0115 Coolie day 0.09 645.00 58.05
9999 Removal of rubbish L.S. 4.16 2.12 8.82
TOTAL 373.12
Add 1 % Water charges on "W" 3.73
TOTAL 376.85
Add GST on "X" (multiplying factor 0.1405) 52.95
TOTAL 429.80
Add 15% CPOH on "Y" 64.47
TOTAL 494.27
Add Cess @ 1% on "Z" 4.94
Cost for 10 metre 499.21
Cost per metre 49.92
Say 49.90
16.9 Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and
consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
LABOUR
0114 Beldar day 1.35 645.00 870.75
0115 Coolie day 1.08 645.00 696.60
Consolidation of scarified material
100sqm.x50mm = 5cum +
Less 20% wastage = 1 cum.
= 4 cum.
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.132 3000.00 396.00
0113 Chowkidar day 0.132 645.00 85.14
9999 Sundries L.S. 5.46 2.12 11.58
TOTAL 2060.07
Add 1 % Water charges on "W" 20.60
TOTAL 2080.67
Add GST on "X" (multiplying factor 0.1405) 292.33
TOTAL 2373.00
Add 15% CPOH on "Y" 355.95
TOTAL 2728.95
Add Cess @ 1% on "Z" 27.29
Cost for 100 sqm. 2756.24
Cost per sqm. 27.56
Say 27.55
16.10 Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep
blinding material consisting of 12 mm moorum and 12 mm red bajri
consolidated with road roller.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
Earth work in excavation including dressing etc.
100x0.075=7.5cum.
2.6.1 (Rate as per item no.2.6.1 of S.H. Earth work) cum 7.50 205.45 1540.88
Collection and stacking of brick aggregate 53mm nominal size
100x0.075 =7.50cum.
0286 Brick Aggregate (Single size) : 50 mm nominal size cum 7.50 650.00 4875.00
2260 Carriage of Brick aggregate cum 7.50 178.19 1336.43
Supply staking Red Bajri
100x0.012= 1.2 cum
16.3.8 Rate as per Item Number 16.3.8 of SH: Road Work cum 1.20 1557.25 1868.70
Collection and stacking of moorum at site
100x0.012 = 1.20cum.
16.3.10 Rate as per Item Number 16.3.10 of SH: Road Work cum 1.20 888.30 1065.96
Spreading and consolidation of brick aggregate and blinding
material etc.
LABOUR
0114 Beldar day 1.95 645.00 1257.75
0115 Coolie day 2.63 645.00 1696.35
0101 Bhisti day 1.35 714.00 963.90
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.135 3000.00 405.00
0113 Chowkidar day 0.135 645.00 87.08
9999 Sundries L.S. 20.15 2.12 42.72
Spreading of red bajri, watering and rolling
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.054 3000.00 162.00
0113 Chowkidar day 0.054 645.00 34.83
TOTAL 15336.58
Add 1 % Water charges on "W-A" 108.61
TOTAL 15445.19
Add GST on "X-A" (multiplying factor 0.1405) 1541.24
TOTAL 16986.43
Add 15% CPOH on "Y-A" 1876.63
TOTAL 18863.06
Add Cess @ 1% on "Z-A" 143.88
Cost for 100 sqm. 19006.94
Cost per sqm. 190.07
Say 190.05
16.11 Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm.
MATERIAL
1158 Stone for pitching 15 cm x 22.5 cm cum 2.25 600.00 1350.00
2216 Carriage of Stone blocks white & red sand stone & kota stone
slab tonne 5.05 145.72 735.89
2.25x2245/1000 = 5.05 t
LABOUR
0123 Mason (brick layer) 1st class day 1.08 784.00 846.72
0124 Mason (brick layer) 2nd class day 1.08 714.00 771.12
0114 Beldar day 2.15 645.00 1386.75
0115 Coolie day 1.61 645.00 1038.45
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 6143.26
Add 1 % Water charges on "W" 61.43
TOTAL 6204.69
Add GST on "X" (multiplying factor 0.1405) 871.76
TOTAL 7076.45
Add 15% CPOH on "Y" 1061.47
TOTAL 8137.92
Add Cess @ 1% on "Z" 81.38
Cost for 10 sqm. 8219.30
Cost per sqm. 821.93
Say 821.95
16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :
16.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm.
MATERIAL
2602 Common burnt clay F.P.S. (non modular) bricks class
designation 7.5 1000 Nos 0.645 4590.00 2960.55
2201 Carriage of Bricks 1000 Nos 0.645 437.15 281.96
LABOUR
0123 Mason (brick layer) 1st class day 0.40 784.00 313.60
0124 Mason (brick layer) 2nd class day 0.40 714.00 285.60
0114 Beldar day 1.08 645.00 696.60
TOTAL 4538.31
Add 1 % Water charges on "W" 45.38
TOTAL 4583.69
Add GST on "X" (multiplying factor 0.1405) 644.01
TOTAL 5227.70
Add 15% CPOH on "Y" 784.16
TOTAL 6011.86
Add Cess @ 1% on "Z" 60.12
Cost for 10 sqm. 6071.98
Cost per sqm. 607.20
Say 607.20
16.13 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red
labour required.
16.13.1 bituminous portion

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1.08cum. (road 6 metres wide, 0.6 metre length wise
and 0.30m (average depth) volume = 1.08 cum). MATERIAL
Supplying and stacking stone aggregate 53mm to 24 mm nominal size at
site.
16.3.3 Rate as per Item Number 16.3.3 of SH: Road Work Supplying and 0.09 1837.25 165.35
16.3.8 stacking red bajri at site cum cum 0.023 1557.25 35.82
16.3.10 Rate as per Item Number 16.3.8 of SH: Road Work Supplying and cum 0.022 888.30 19.54
2911 stacking moorum at site cum cum 0.092 1200.00 110.40
2202 Rate as per Item Number 16.3.10 of SH: Road Work 0.092 163.93 15.08
Stone chippings/ screenings 10/ 11.2 mm nominal size Carriage of Stone
aggregate below 40 mm nominal size
0309 Paving bitumen VG-10 of approved quality Carriage of Tar bitumen tonne 0.011 25614.00 281.75
2211 LABOUR tonne 0.011 163.93 1.80
0114 For cutting road and taking out soling and metalling including sorting and day day 0.96 645.00 619.20
0115 screening. day day 0.48 645.00 309.60
0114 Beldar Coolie day day 0.24 645.00 154.80
0115 Relaying soling stone 3.6x0.15=0.54cum. Beldar day 0.24 645.00 154.80
0114 Coolie day day 0.71 645.00 457.95
0115 Relaying road metal with extra quantity and consolidation to 0.10m, L.S. 0.48 645.00 309.60
0101 thickness 3.6x0.10=0.36cum. 0.10 714.00 71.40
0114 Beldar Coolie Bhisti 0.48 645.00 309.60
0115 Painting two coats, 3.6sqm. including labour for spreading grit 0.48 645.00 309.60
9999 Beldar Coolie 40.43 2.12 85.71
Barrier, chowkidar, sprayman, mate, etc. TOTAL 3412.01
Add 1 % Water charges on "W-A" TOTAL 31.91
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 3443.93
Add 15% CPOH on "Y-A" TOTAL 452.86
Add Cess @ 1% on "Z-A" Cost for 1.08 cum. 3896.79
Cost per cum. 551.41
Say 4448.20
42.27
4490.47
4157.85
4157.85

16.13.2 Water bound macadam


Code Description Unit Quantity Rate Rs. Amount Rs.
16.3.3 Details of cost for 0.90cum. cum cum cum 0.09 1837.25 165.35
16.3.8 Consider a road 6 metres wide and 0.6m. lengthwise and 0.25m cm day day 0.023 1557.25 35.82
16.3.10 average depth =0.90cum. day day 0.022 888.30 19.54
0114 MATERIAL day day day 0.48 645.00 309.60
0115 Supplying and stacking stone aggregate 53mm to 24mm nominal size at L.S. 0.24 645.00 154.80
0114 site. 0.24 645.00 154.80
0115 Rate as per Item Number 16.3.3 of SH: Road Work Supplying and 0.24 645.00 154.80
- 0114 stacking red bajri at site 0.48 645.00 309.60
0115 Rate as per Item Number 16.3.8 of SH: Road Work Supplying and 0.48 645.00 309.60
0101 stacking moorum at site. 0.10 714.00 71.40
9999 Rate as per Item Number 16.3.10 of SH: Road Work LABOUR 53.82 2.12 114.10
For cutting road and taking out soling and metalling including sorting and 1799.41
screening. 15.79
Beldar Coolie 1815.20
For relaying soling stone 3.6x0.15=0.54cum. Beldar 224.03
Coolie 2039.22
For relaying road metal with extra quantity and consolidation to 0.10m 272.78
thickness 2312.00
3.6x0.10=0.36cum. 20.91
Beldar Coolie Bhisti 2332.91
Barrier and chowkidar etc. TOTAL 2592.12
Add 1 % Water charges on "W-A" TOTAL 2592.10
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 0.90 cum.
Cost per cum.
Say
16.14 Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate,
moorum and red bajri required.

Code Description Unit Quantity Rate Rs. Amount Rs.


0286 Details of cost for 10 sqm. 10x0.075=0.75cum. cum cum 0.19 650.00 123.50
2260 MATERIAL cum cum 0.19 178.19 33.86
16.3.8 Supplying and stacking 50mm brick aggregate at site(extra quantity) day day 0.06 1557.25 93.44
16.3.10 Brick Aggregate (Single size) : 50 mm nominal size Carriage of Brick 0.06 888.30 53.30
0114 aggregate 1.60 645.00 1032.00
0115 Supplying and stacking red bajri at site 0.80 645.00 516.00
Rate as per Item Number 16.3.8 of SH: Road Work Supplying and 1852.09
stacking moorum at site 17.05
Rate as per Item Number 16.3.10 of SH: Road LABOUR 1869.14
For cutting, sorting out, spreading and consolidation of aggregate 242.00
Beldar Coolie TOTAL 2111.14
Add 1 % Water charges on "W-A" TOTAL 294.66
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 2405.80
Add 15% CPOH on "Y-A" TOTAL 22.59
Add Cess @ 1% on "Z-A" Cost for 10 sqm. 2428.39
Cost per sqm. 242.84
Say 242.85

16.15 Supplying at site :


16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nomina
wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete work
foundation to be paid
separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 posts = 0.336cum Cubical contents of one post
Area bottom A1 = (15+12.5)/2 x8.75+½x3.14 x(6.25)²
=120.31+61.38=181.69sqcm.
Area bottom A2 = (10+7.5)/2 x6.25+½x3.14 x(3.75)² sqm
= 54.68+22.08 = 76.76 sqcm.
(A1A2)^½ = 118.10sqcm A1+A2+(A1A2))^½ = 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
Volume of lower and square portion (16.5x16.5x75) / 100³ = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum.
Qty. for 10 post
= 0.0336x10 = 0.336cum.
Cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone
aggregate 12.5mm nominal size)
Rate as per item no 4.1.2 of S.H. Concrete Work. Extra labour for laying
cement concrete in
RCC work Beldar Bhisti
Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate

4.1.2 cum 0.336 7783.65 2615.31


0114 day day 0.034 645.00 21.93
0101 day day 0.067 714.00 47.84
0123 day 0.013 784.00 10.19
0124 0.013 714.00 9.28
0128 0.013 714.00 9.28
M.S. Reinforcement
6mm dia. bars
10x4x1.88m = 75.20m+
10x9x0.50m =45.00m = 120.20m
[email protected]/m =26.44kg.
5.22.2 Rate as per Item No.5.22.2 of SH: Reinforced cement concrete
work kg 26.44 87.50 2313.50
Centering and shuttering
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete
work sqm 6.99 307.95 2152.57
6mm C.Plaster 1:2 (1 Cement : 2 fine sand)
Details of cost for 9.88 sqm.
(0.072)/10x9.88 = 0.071
0367 Portland Cement (OPC-43 grade) tonne 0.05 5000.00 250.00
2209 Carriage of Cement tonne 0.05 145.72 7.29
0983 Fine sand (zone IV) cum 0.07 900.00 63.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.07 163.93 11.48
LABOUR
0114 Beldar day 0.05 645.00 32.25
0101 Bhisti day 0.02 714.00 14.28
0155 Mason (average) day 0.64 749.00 479.36
0115 Coolie day 0.80 645.00 516.00
0101 Bhisti day 0.27 714.00 192.78
9999 Hire and running charges of mixer L.S. 1.95 2.12 4.13
9999 Extra for removing burr, cleaning with wire brushes, pock
making with pointed tool etc. complete L.S. 13.26 2.12 28.11
9999 Scaffolding and sundries L.S. 11.57 2.12 24.53
9977 Carriage of RCC posts L.S. 53.82 2.12 114.10
9999 Wooden plugs or 6mm bar nibs L.S. 12.22 2.12 25.91
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 8971.77
Add 1 % Water charges on "W-A" 18.90
TOTAL 8990.68
Add GST on "X-A" (multiplying factor 0.1405) 268.26
TOTAL 9258.93
Add 15% CPOH on "Y-A" 326.63
TOTAL 9585.57
Add Cess @ 1% on "Z-A" 25.04
Cost for 0.336 cum 9610.61
Cost for one cum 28603.00
Say 28603.00
16.15.2 Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approve
over a coat of primer (Priming & Painting to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 27 sqm (209.25 kg).
MATERIAL
Steel wire fabric 0.9m wide rectangular mesh 75x25mm size
weight not less than 7.75kg/sqm. 30x0.9 = 27sqm
1021 Hard drawn steel wire fabric sqm 27.00 430.00 11610.00
2314 Carriage of Barbed wire tonne 0.209 145.72 30.46
7.75x27=209.25kg=0.209tonne
TOTAL 11640.46
Add 1 % Water charges on "W" 116.40
TOTAL 11756.86
Add GST on "X" (multiplying factor 0.1405) 1651.84
TOTAL 13408.70
Add 15% CPOH on "Y" 2011.30
TOTAL 15420.00
Add Cess @ 1% on "Z" 154.20
Cost for 209.25 kg 15574.20
Cost per kg. 74.43
Say 74.45
16.16 Supplying and fixing turn buckles and straining bolts for barbed wire fencing.
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one set
MATERIAL
1030 Galvanised steel turn buckles each 1.00 25.00 25.00
1028 Straining bolts each 1.00 80.00 80.00
9977 Carriage of turn buckles and straining bolts L.S. 2.73 2.12 5.79
Labour for fixing straining bolts and turn buckles
0103 Blacksmith 2nd class day 0.10 714.00 71.40
TOTAL 182.19
Add 1 % Water charges on "W" 1.82
TOTAL 184.01
Add GST on "X" (multiplying factor 0.1405) 25.85
TOTAL 209.86
Add 15% CPOH on "Y" 31.48
TOTAL 241.34
Add Cess @ 1% on "Z" 2.41
Cost per set 243.76
Say 243.75
16.17 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end p
corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire wei
kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm ba
while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost
length of barbed wire used.
16.17.1 With G.I. barbed wire

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30m
MATERIAL
G.I. barbed wire
30x9 = 270m +
10x6.32 = 63m
Total = 333m
333m @9.38kg/100m =31.24kg = 0.31q
1029 Galvanised steel barbed wire quintal 0.31 5500.00 1705.00
2314 Carriage of Barbed wire tonne 0.03 145.72 4.37
9999 G.I. staples or binding wire L.S. 49.40 2.12 104.73
LABOUR
Labour for fixing costs in line, fixing and stretching wire
0123 Mason (brick layer) 1st class day 0.12 784.00 94.08
0124 Mason (brick layer) 2nd class day 0.12 714.00 85.68
0114 Beldar day 0.50 645.00 322.50
0102 Blacksmith 1st class day 0.50 784.00 392.00
0103 Blacksmith 2nd class day 0.50 714.00 357.00
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 3094.02
Add 1 % Water charges on "W" 30.94
TOTAL 3124.96
Add GST on "X" (multiplying factor 0.1405) 439.06
TOTAL 3564.02
Add 15% CPOH on "Y" 534.60
TOTAL 4098.62
Add Cess @ 1% on "Z" 40.99
Cost for 333m 4139.61
Cost per m 12.43
Say 12.45
16.18 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one en
corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven
horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckle
complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length
wire used.
16.18.1 With G.I. barbed wire

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 333.24 metre
MATERIAL
G.I. barbed wire
30x9 = 270.00m
2x10x(12+32)1/2 = 63.24
= 333.24m
333.24m @ 9.38kg/100m =31.26 kg say 0.31 q
1029 Galvanised steel barbed wire quintal 0.31 5500.00 1705.00
2314 Carriage of Barbed wire tonne 0.031 145.72 4.52
Supplying and fixing Turn buckle & staple
16.16 Rate as per Item Number 16.16 of SH: Road Work each set 10.00 243.75 2437.50
9999 G.I. staples L.S. 49.40 2.12 104.73
Labour for fixing posts in line and fixing and stretching wire:
0123 Mason (brick layer) 1st class day 0.12 784.00 94.08
0124 Mason (brick layer) 2nd class day 0.12 714.00 85.68
0114 Beldar day 0.50 645.00 322.50
0102 Blacksmith 1st class day 0.50 784.00 392.00
0103 Blacksmith 2nd class day 0.50 714.00 357.00
TOTAL 5503.01
Add 1 % Water charges on "W-A" 30.66
TOTAL 5533.66
Add GST on "X-A" (multiplying factor 0.1405) 435.01
TOTAL 5968.67
Add 15% CPOH on "Y-A" 529.68
TOTAL 6498.35
Add Cess @ 1% on "Z-A" 40.61
Cost for 333.24m 6538.96
Cost per m 19.62
Say 19.60
16.19 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite directi
length and drilling holes upto 10 mm dia. etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 qunital
MATERIAL
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
Total = =1.05 qtl
1007 Structurals such as tees,angles channels and R.S. joists quintal 1.05 4950.00 5197.50
2205 Carriage of Steel tonne 0.105 145.72 15.30
LABOUR
0103 Blacksmith 2nd class day 0.75 714.00 535.50
0114 Beldar day 0.50 645.00 322.50
For spotting, bending of angle and drilling holes etc. :
0103 Blacksmith 2nd class day 1.00 714.00 714.00
0114 Beldar day 1.00 645.00 645.00
9999 Sundries such as drilling bit etc. L.S. 19.76 2.12 41.89
TOTAL 7471.69
Add 1 % Water charges on "W" 74.72
TOTAL 7546.41
Add GST on "X" (multiplying factor 0.1405) 1060.27
TOTAL 8606.68
Add 15% CPOH on "Y" 1291.00
TOTAL 9897.68
Add Cess @ 1% on "Z" 98.98
Cost for 1 qunital 9996.66
Cost of one kg 99.97
Say 99.95
16.20 Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concr
45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post a
post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50 cm of the sam
provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs w
binding wire (cost of posts,
welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metres i.e.30x1.20 =36.00sqm
Labour for fixing posts in line fixing and stretching - welded wire
fabric :
0123 Mason (brick layer) 1st class day 0.12 784.00 94.08
0124 Mason (brick layer) 2nd class day 0.12 714.00 85.68
0114 Beldar day 0.50 645.00 322.50
0102 Blacksmith 1st class day 0.50 784.00 392.00
0103 Blacksmith 2nd class day 0.50 714.00 357.00
9999 G.I. staple or binding wire L.S. 53.82 2.12 114.10
9999 Sundries L.S. 53.82 2.12 114.10
TOTAL 1479.46
Add 1 % Water charges on "W" 14.79
TOTAL 1494.25
Add GST on "X" (multiplying factor 0.1405) 209.94
TOTAL 1704.19
Add 15% CPOH on "Y" 255.63
TOTAL 1959.82
Add Cess @ 1% on "Z" 19.60
Cost for 36 sqm 1979.42
Cost per sqm 54.98
Say 55.00

16.21 Engraving letters in hard stone

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 6 letters 8 cm height
LABOUR
For Engraving stone-
0126 Mason (for ornamental stone work) 1st class day 0.38 784.00 297.92
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 312.25
Add 1 % Water charges on "W" 3.12
TOTAL 315.37
Add GST on "X" (multiplying factor 0.1405) 44.31
TOTAL 359.68
Add 15% CPOH on "Y" 53.95
TOTAL 413.64
Add Cess @ 1% on "Z" 4.14
Cost of 6 letters of 8cm heights 417.77
Cost per cm. height per letter 8.70
Say 8.70
16.22 Providing and fixing 15x15x90 cm boundary stone of hard stone with top 30 cm chisel dressed on all
four sides including top (cost of excavation, refilling and concrete etc. to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one stone
1151 Boundry stone top chisel dressed 15x15x90 cm each 1.00 80.00 80.00
Labour for fixing
0114 Beldar day 0.12 645.00 77.40
9977 Carriage to site L.S. 4.16 2.12 8.82
TOTAL 166.22
Add 1 % Water charges on "W" 1.66
TOTAL 167.88
Add GST on "X" (multiplying factor 0.1405) 23.59
TOTAL 191.47
Add 15% CPOH on "Y" 28.72
TOTAL 220.19
Add Cess @ 1% on "Z" 2.20
Cost of each. 222.39
Say 222.40
16.23 Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm high precast reinforced cement concrete 1:1.5:3 (1 cement : 1
sand : 3 graded stone aggregate 20 mm nominal size) boundary stone as per standard design, including finishing smooth with cement mor
cement : 3 fine sand)
(cost of excavation, refilling and concreting to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one stone
(i) Cement concrete 1:1½:3 (1 cement : 1½ Coarse sand : 3
graded stone aggregate 20mm nominal size)
Volume of frustum of cone:
L/3 x [A1+A2+sqrt(A1A2)] = 0.825/3 x
[0.095²+0.075² + sqrt(0.095 x 0.075²)]x3.142=0.01882 (A)
Volume of hemi sphere:
½ x 4 /3 x PI x r³ = ½x(4/ 3)x(22/7)x0.075³=0.00100 (B)
Total volume = A+B = 0.01982 Say 0.02cum
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Work. cum 0.02 7783.65 155.67
(ii) Extra for laying cement concerte in RCC work
LABOUR
0114 Beldar day 0.002 645.00 1.29
0101 Bhisti day 0.004 714.00 2.86
0123 Mason (brick layer) 1st class day 0.0008 784.00 0.63
0124 Mason (brick layer) 2nd class day 0.0008 714.00 0.57
0128 Mate day 0.0008 714.00 0.57
(iii) M.S. reinforcement- 6mm dia. Bar
5.99 metre =5.99x0.22 =1.32kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 1.32 88.95 117.41
(iv) Centering and shuttering-
1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete
work sqm 0.50 307.95 153.98
(v) 6mm cement plaster 1:3 (1 Cement : 3 fine sand)-
1/2x3.142 (0.19+0.15)x0.825 =0.44 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
MATERIAL
0367 Portland Cement (OPC-43 grade) tonne 0.0018 5000.00 9.00
2209 Carriage of Cement tonne 0.0018 145.72 0.26
0983 Fine sand (zone IV) cum 0.0385 900.00 34.65
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.0385 163.93 6.31
Labour for mortar
0114 Beldar day 0.0027 645.00 1.74
0101 Bhisti day 0.0002 714.00 0.14

9999 Hire and running charges of mixer L.S. 0.10 2.12 0.21
9999 Sundries L.S. 0.05 2.12 0.11
Labour for plaster
0155 Mason (average) day 0.026 749.00 19.47
0115 Coolie day 0.038 645.00 24.51
0101 Bhisti day 0.046 714.00 32.84
9999 Extra for removing burr L.S. 0.68 2.12 1.44
9999 Scaffolding, sundries etc. L.S. 0.60 2.12 1.27
(vi) Labour for fixing
0114 Beldar day 0.12 645.00 77.40
9977 Carriage to site L.S. 4.16 2.12 8.82
TOTAL 651.16
Add 1 % Water charges on "W-A" 2.24
TOTAL 653.41
Add GST on "X-A" (multiplying factor 0.1405) 31.80
TOTAL 685.21
Add 15% CPOH on "Y-A" 38.72
TOTAL 723.93
Add Cess @ 1% on "Z-A" 2.97
Cost of each. 726.90
Say 726.90
16.24 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm
size) kilometre stone as per standard design, including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the co
work, concrete in foundation, painting and lettering etc. which shall be paid for separately.
16.24.1 35x111x25 cm size

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one stone
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size) in Kilometre stone
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175)²x0.25m = 0.012
= 0.095cum
Say 0.10cum.
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Work. cum 0.10 7783.65 778.37
(ii) Extra for laying cement concrete in RCC work
0114 Beldar day 0.01 645.00 6.45
0101 Bhisti day 0.02 714.00 14.28
0123 Mason (brick layer) 1st class day 0.004 784.00 3.14
0124 Mason (brick layer) 2nd class day 0.004 714.00 2.86
0128 Mate day 0.004 714.00 2.86
(iii) M.S. reinforcement- 0.10cum @48.06kg/cum. =4.806kg.
Say 4.81kg.
5.22.1 Rate as per item no. 5.22.1 of SH : Reinforced cement concrete
work kg 4.81 88.95 427.85
(iv) Centering and shuttering-
(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 = 0.007 sqm
2x2x0.25x0.1 = 0.010sqm
1/2x3.142/4x(0.35)² = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1.092sqm. Say 1.09 sqm
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete
work sqm 1.09 307.95 335.67
(v) 6mm cement plaster 1:3 (1 Cement : 3 fine sand)-
Qty. as per centering and shuttering = 1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35)²= 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
0367 Portland Cement (OPC-43 grade) tonne 0.054 5000.00 270.00
2209 Carriage of Cement tonne 0.054 145.72 7.87
0983 Fine sand (zone IV) cum 0.011 900.00 9.90

2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna


sand) cum 0.011 163.93 1.80
Labour for mortar
0114 Beldar day 0.008 645.00 5.16
0101 Bhisti day 0.0007 714.00 0.50
9999 Hire and running charges of mixer L.S. 0.03 2.12 0.06
9999 Sundries L.S. 0.13 2.12 0.28
Labour for plaster
0155 Mason (average) day 0.075 749.00 56.18
0115 Coolie day 0.111 645.00 71.60
0101 Bhisti day 0.136 714.00 97.10
9999 Extra for removing burr L.S. 1.95 2.12 4.13
9999 Scaffolding, sundries etc. L.S. 1.82 2.12 3.86
(vi) Labour for fixing
0114 Beldar day 0.20 645.00 129.00
9977 Carriage to site L.S. 13.52 2.12 28.66
TOTAL 2257.56
Add 1 % Water charges on "W-A" 7.16
TOTAL 2264.71
Add GST on "X-A" (multiplying factor 0.1405) 101.56
TOTAL 2366.27
Add 15% CPOH on "Y-A" 123.66
TOTAL 2489.93
Add Cess @ 1% on "Z-A" 9.48
Cost per stone 2499.41
Say 2499.40

16.24.2 50x152.5x25 cm size


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one stone
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size)
0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
1/2x22/7x(0.25)²x0.25m = 0.025cum.
= 0.186 cum.
Say 0.19cum.
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Work. cum 0.19 7783.65 1478.89
(ii) Extra for laying cement concrete in RCC work
0114 Beldar day 0.019 645.00 12.26
0101 Bhisti day 0.038 714.00 27.13
0123 Mason (brick layer) 1st class day 0.008 784.00 6.27
0124 Mason (brick layer) 2nd class day 0.008 714.00 5.71
0128 Mate day 0.008 714.00 5.71
(iii) M.S. reinforcement-
0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
5.22.1 Rate as per item no. 5.22.1 of SH : Reinforced cement concrete
work kg 9.13 88.95 812.11
(iv) Centering and shuttering-
(0.50+2x0.25)x1.145 = 1.145 sqm
1/2x(0.25)²x3.142 = 0.098
3.142(0.25)x(0.25) =0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25 =0.125
=1.722sqm. Say 1.72 sqm
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete
work sqm 1.72 307.95 529.67
(v) 6mm cement plaster 1:3 (1 Cement : 3 fine sand)-
Qty. as per centering and shuttering
= 1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 = 0.068sqm. +
1/2x(0.25)²x3.142 = 0.098 +
2x0.52x001 = 0.010
= 2.470sqm Sq. 2.47 sqm.
MATERIAL
0367 Portland Cement (OPC-43 grade) tonne 0.09 5000.00 450.00
2209 Carriage of Cement tonne 0.09 145.72 13.11

0983 Fine sand (zone IV) cum 0.20 900.00 180.00


2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.20 163.93 32.79
Labour for mortar
0114 Beldar day 0.013 645.00 8.39
0101 Bhisti day 0.001 714.00 0.71
9999 Hire and running charges of mixer L.S. 0.52 2.12 1.10
9999 Sundries L.S. 0.26 2.12 0.55
Labour for plaster
0155 Mason (average) day 0.126 749.00 94.37
0115 Coolie day 0.185 645.00 119.33
0101 Bhisti day 0.227 714.00 162.08
9999 Extra for removing burr L.S. 3.38 2.12 7.17
9999 Scaffolding, sundries etc. L.S. 2.86 2.12 6.06
(vi) Labour for fixing
0114 Beldar day 0.20 645.00 129.00
9977 Carriage to site L.S. 13.52 2.12 28.66
TOTAL 4111.09
Add 1 % Water charges on "W-A" 12.90
TOTAL 4123.99
Add GST on "X-A" (multiplying factor 0.1405) 183.11
TOTAL 4307.10
Add 15% CPOH on "Y-A" 222.96
TOTAL 4530.07
Add Cess @ 1% on "Z-A" 17.09
Cost per stone 4547.16
Say 4547.15

16.24.3 35x93.5x18 cm size


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one stone
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size)
0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum.
= 0.060 cum.
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Work. cum 0.06 7783.65 467.02
(ii) Extra for laying cement concrete in RCC work
0114 Beldar day 0.006 645.00 3.87
0101 Bhisti day 0.012 714.00 8.57
0123 Mason (brick layer) 1st class day 0.0024 784.00 1.88
0124 Mason (brick layer) 2nd class day 0.0024 714.00 1.71
0128 Mate day 0.0024 714.00 1.71
(iii) M.S. reinforcement-0.06cum @48.06kg/cum. =2.8836 kg.
Say 2.88 kg.
5.22.1 Rate as per item no. 5.22.1 of SH : Reinforced cement concrete
work kg 2.88 88.95 256.18
(iv) Centering and shuttering-
(0.35+2x0.18)x0.835 = 0.593 sqm
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 = 0.007sqm
2x2x0.18x0.01 = 0.007sqm
= 0.810 sqm
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced cement concrete
work sqm 0.81 307.95 249.44
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)-
Qty. as per centering and shuttering = 0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm
= 1.146 sqm Say 1.15sqm
MATERIAL
0367 Portland Cement (OPC-43 grade) tonne 0.042 5000.00 210.00
2209 Carriage of Cement tonne 0.042 145.72 6.12
0983 Fine sand (zone IV) cum 0.009 900.00 8.10
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.009 163.93 1.48
Labour for mortar
0114 Beldar day 0.006 645.00 3.87
0101 Bhisti day 0.0006 714.00 0.43
9999 Hire and running charges of mixer L.S. 0.26 2.12 0.55
9999 Sundries L.S. 0.13 2.12 0.28
Labour for plaster
0155 Mason (average) day 0.058 749.00 43.44
0115 Coolie day 0.086 645.00 55.47
0101 Bhisti day 0.105 714.00 74.97
9999 Extra for removing burr L.S. 1.56 2.12 3.31
9999 Scaffolding, sundries etc. L.S. 1.30 2.12 2.76
(vi) Labour for fixing
0114 Beldar day 0.10 645.00 64.50
9977 Carriage to site L.S. 13.52 2.12 28.66
TOTAL 1494.31
Add 1 % Water charges on "W-A" 5.22
TOTAL 1499.53
Add GST on "X-A" (multiplying factor 0.1405) 74.03
TOTAL 1573.55
Add 15% CPOH on "Y-A" 90.14
TOTAL 1663.69
Add Cess @ 1% on "Z-A" 6.91
Cost of each 1670.60
Say 1670.60
16.25 Surface dressing on new surface with paving bitumen of grade VG - 10 of approved quality using 2.25 kg of bitumen per sqm w
of stone chippings 13.2 mm nominal size per 100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne capacity etc. complete:

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen [email protected] per sqm. =225 kg = 0.225 tonne.
0309 Paving bitumen VG-10 of approved quality tonne 0.225 25614.00 5763.15
2211 Carriage of Tar bitumen tonne 0.225 163.93 36.88
Stone aggregate 13.2mm nominal size @ 1.65cum. per
100sqm.
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.65 1200.00 1980.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.65 163.93 270.48
Steam coal for heating bitumen @2 quintal per tonne of bitumen
= 2x0.225=0.450q
0370 Coal (steam) quintal 0.45 440.00 198.00
2200 Carriage of steam coal tonne 0.045 187.35 8.43
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate
(a) For cleaning :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating and spraying bitumen :
0130 Mistry day 0.08 784.00 62.72
0138 Sprayer (for bitumen, tar etc.) day 0.11 714.00 78.54
0114 Beldar day 0.93 645.00 599.85
(c) For screening and spreading aggregate :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 0.93 645.00 599.85
0115 Coolie day 1.55 645.00 999.75
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.12 800.00 96.00
0007 Hire charges of Coaltar Sprayer day 0.11 350.00 38.50
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 6.76 2.12 14.33
TOTAL 13315.19
Add 1 % Water charges on "W" 133.15
TOTAL 13448.34
Add GST on "X" (multiplying factor 0.1405) 1889.49
TOTAL 15337.84
Add 15% CPOH on "Y" 2300.68

TOTAL 17638.51
Add Cess @ 1% on "Z" 176.39
Cost for 100 Sqm. 17814.90
Cost per Sqm. 178.15
Say 178.15
16.26 Surface dressing on new surface in two coats with bitumen of grade VG -10 of approved quality using
1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bi
sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of e
separately with road roller of 6 to 8 tonne capacity etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen S-90/A-90 @ 1.8kg/sqm.=180kg.=0.18 tonne
0309 Paving bitumen VG-10 of approved quality tonne 0.18 25614.00 4610.52
2211 Carriage of Tar bitumen tonne 0.18 163.93 29.51
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.50 1200.00 1800.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.50 163.93 245.90
Steam coal for heating bitumen @2 qunital per tonne
0370 Coal (steam) quintal 0.36 440.00 158.40
2200 Carriage of steam coal tonne 0.036 187.35 6.74
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate
(a) For cleaning :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating and spraying bitumen :
0130 Mistry day 0.08 784.00 62.72
0138 Sprayer (for bitumen, tar etc.) day 0.11 714.00 78.54
0114 Beldar day 1.38 645.00 890.10
(c) For screening and spreading aggregate :
0128 Mate day 0.27 714.00 192.78
0114 Beldar day 0.85 645.00 548.25
0115 Coolie day 0.85 645.00 548.25
(d) Consolidation Charges
0113 Chowkidar day 0.11 645.00 70.95
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.12 800.00 96.00
0007 Hire charges of Coaltar Sprayer day 0.11 350.00 38.50
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 16.38 2.12 34.73
Second Coat
MATERIAL
Bitumen S-90/A-90 @ 1.10kg per sqm = 110kg.=0.11 tonne
0309 Paving bitumen VG-10 of approved quality tonne 0.11 25614.00 2817.54
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.00 1200.00 1200.00
2211 Carriage of Tar bitumen tonne 0.11 163.93 18.03
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.00 163.93 163.93
Steam coal for heating bitumen @2 qunital per tonne of bitumen
0370 Coal (steam) quintal 0.22 440.00 96.80
2200 Carriage of steam coal tonne 0.022 187.35 4.12
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate
(a) For cleaning and brushing loose chips:
0128 Mate day 0.06 714.00 42.84
0115 Coolie day 0.97 645.00 625.65
(b) For heating and spraying bitumen :
0130 Mistry day 0.05 784.00 39.20
0138 Sprayer (for bitumen, tar etc.) day 0.07 714.00 49.98
0114 Beldar day 0.75 645.00 483.75
(c) For screening and spreading aggregate :
0128 Mate day 0.07 714.00 49.98

0114 Beldar day 0.62 645.00 399.90


0115 Coolie day 0.62 645.00 399.90
(d) Consolidation Charges
0113 Chowkidar day 0.15 645.00 96.75
0101 Bhisti day 0.06 714.00 42.84
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.06 3000.00 180.00
0007 Hire charges of Coaltar Sprayer day 0.07 350.00 24.50
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.06 800.00 48.00
(e) Misc:
0364 Wire brush each 0.03 20.00 0.60
(with thick wire)
0365 Soft brush each 0.09 20.00 1.80
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 18534.13
Add 1 % Water charges on "W" 185.34
TOTAL 18719.47
Add GST on "X" (multiplying factor 0.1405) 2630.09
TOTAL 21349.55
Add 15% CPOH on "Y" 3202.43
TOTAL 24551.99
Add Cess @ 1% on "Z" 245.52
Cost for per 100 sqm. 24797.51
Cost per 1 Sqm. 247.98
Say 248.00
16.27 Surface dressing on old surface with hot bitumen of grade VG - 10 of approved quality using 1.95 kg of bitumen per sqm with 1
stone chippings 11.2 mm nominal size per 100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne capacity, etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen 1.95kg./sqm.= 195kg. or 0.195t
0309 Paving bitumen VG-10 of approved quality tonne 0.195 25614.00 4994.73
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.50 1200.00 1800.00
@ 1.50cum. per 100 sqm.
2211 Carriage of Tar bitumen tonne 0.195 163.93 31.97
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.50 163.93 245.90
Steam coal for heating bitumen @2 quintal per tonne of bitumen
0370 Coal (steam) quintal 0.39 440.00 171.60
2200 Carriage of steam coal tonne 0.039 187.35 7.31
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate etc.
(a) For cleaning :
0128 Mate day 0.06 714.00 42.84
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.97 645.00 625.65
(b) For heating and spraying bitumen :
0130 Mistry day 0.05 784.00 39.20
0138 Sprayer (for bitumen, tar etc.) day 0.06 714.00 42.84
0114 Beldar day 0.69 645.00 445.05
(c) For screening and spreading aggregate :
0128 Mate day 0.66 714.00 471.24
0114 Beldar day 0.51 645.00 328.95
0115 Coolie day 0.51 645.00 328.95
(d) Consolidation Charges
0113 Chowkidar day 0.15 645.00 96.75
0101 Bhisti day 0.06 714.00 42.84
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.06 3000.00 180.00
0007 Hire charges of Coaltar Sprayer day 0.06 350.00 21.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.06 800.00 48.00
(e) Misc:
Brushes etc. for cleaning
0364 Wire brush each 0.05 20.00 1.00
(with thick wire)
0365 Soft brush each 0.12 20.00 2.40
9999 Brooms and gunny bags L.S. 2.73 2.12 5.79
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 10301.35
Add 1 % Water charges on "W" 103.01

TOTAL 10404.36
Add GST on "X" (multiplying factor 0.1405) 1461.81
TOTAL 11866.17
Add 15% CPOH on "Y" 1779.93
TOTAL 13646.10
Add Cess @ 1% on "Z" 136.46
Cost for 100 sqm. 13782.56
Cost per Sqm. 137.83
Say 137.85
16.28 Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum
chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity , etc. comple
16.28.1 Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming to IS : 8887)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
0310 Bitumen emulsion tonne 0.195 30800.00 6006.00
2211 Carriage of Tar bitumen tonne 0.195 163.93 31.97
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.50 1200.00 1800.00
@1.50 cum. per 100 sqm. = 1.50cum
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.50 163.93 245.90
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For Spraying bitumen emulsion :
0130 Mistry day 0.07 784.00 54.88
0138 Sprayer (for bitumen, tar etc.) day 0.10 714.00 71.40
0114 Beldar day 1.00 645.00 645.00
(c) For screening and spreading aggregate :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 0.85 645.00 548.25
0115 Coolie day 0.85 645.00 548.25
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.27 714.00 192.78
0003 Hire charges of Diesel Road Roller - 8 to
10 tonne day 0.11 3000.00 330.00
0007 Hire charges of Coaltar Sprayer day 0.10 350.00 35.00
(e) Misc:
Brushes etc. for cleaning
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 12689.70
Add 1 % Water charges on "W" 126.90
TOTAL 12816.60
Add GST on "X" (multiplying factor 0.1405) 1800.73
TOTAL 14617.33
Add 15% CPOH on "Y" 2192.60
TOTAL 16809.93
Add Cess @ 1% on "Z" 168.10
Cost for 100 sqm. 16978.03
Cost per Sqm. 169.78
Say 169.80
16.29 Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 c
chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete
16.29.1 Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming to IS : 8887)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen emulsion @1.22 kg per Sqm. =122
kg. or 0.122 tonne
0310 Bitumen emulsion tonne 0.122 30800.00 3757.60
2211 Carriage of Tar bitumen tonne 0.122 163.93 20.00
Stone chippings 11.2mm nominal size @ 1.10cum. per 100 sqm
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.10 1200.00 1320.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.10 163.93 180.32
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.06 714.00 42.84
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.97 645.00 625.65
(b) For Spraying bitumen emulsion :
0130 Mistry day 0.05 784.00 39.20
0138 Sprayer (for bitumen, tar etc.) day 0.06 714.00 42.84
0114 Beldar day 0.63 645.00 406.35
(c) For screening and spreading aggregate :
0128 Mate day 0.07 714.00 49.98
0114 Beldar day 0.62 645.00 399.90
0115 Coolie day 0.62 645.00 399.90
(d) Consolidation Charges
0113 Chowkidar day 0.15 645.00 96.75
0101 Bhisti day 0.15 714.00 107.10
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.06 3000.00 180.00
0007 Hire charges of Coaltar Sprayer day 0.06 350.00 21.00
(e) Misc:
Brushes etc. for cleaning
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 2.73 2.12 5.79
9999 Sundries L.S. 5.33 2.12 11.30
TOTAL 8031.17
Add 1 % Water charges on "W" 80.31
TOTAL 8111.48
Add GST on "X" (multiplying factor 0.1405) 1139.66
TOTAL 9251.14
Add 15% CPOH on "Y" 1387.67
TOTAL 10638.82
Add Cess @ 1% on "Z" 106.39
Cost for 100 sqm. 10745.20
Cost per Sqm. 107.45
Say 107.45
16.30 Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the b
mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.075 24500.00 1837.50
2211 Carriage of Tar bitumen tonne 0.075 163.93 12.29
0370 Coal (steam) quintal 0.15 440.00 66.00
2200 Carriage of steam coal tonne 0.015 187.35 2.81
MATERIAL
0364 Wire brush each 0.05 20.00 1.00
(with thick wire)
0365 Soft brush each 0.12 20.00 2.40
9999 Gunny bags L.S. 7.80 2.12 16.54
0007 Hire charges of Coaltar Sprayer day 0.03 350.00 10.50
9999 Sundries L.S. 9.10 2.12 19.29
LABOUR
(a) For cleaning :
0128 Mate day 0.06 714.00 42.84

0114 Beldar day 1.46 645.00 941.70


(b) For heating bitumen:
0114 Beldar day 0.19 645.00 122.55
(c) For applying tack coat:
0114 Beldar day 0.47 645.00 303.15
TOTAL 3378.57
Add 1 % Water charges on "W" 33.79
TOTAL 3412.36
Add GST on "X" (multiplying factor 0.1405) 479.44
TOTAL 3891.80
Add 15% CPOH on "Y" 583.77
TOTAL 4475.56
Add Cess @ 1% on "Z" 44.76
Cost for 100 sqm. 4520.32
Cost per Sqm. 45.20
Say 45.20

16.30.2 On bituminous surface @ 0.50 Kg / sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.05 24500.00 1225.00
2211 Carriage of Tar bitumen tonne 0.05 163.93 8.20
0370 Coal (steam) quintal 0.10 440.00 44.00
2200 Carriage of steam coal tonne 0.01 187.35 1.87
MATERIAL
0364 Wire brush each 0.05 20.00 1.00
(with thick wire)
0365 Soft brush each 0.12 20.00 2.40
9999 Gunny bags L.S. 7.80 2.12 16.54
0007 Hire charges of Coaltar Sprayer day 0.03 350.00 10.50
9999 Sundries L.S. 7.80 2.12 16.54
LABOUR
(a) For cleaning :
0128 Mate day 0.06 714.00 42.84
0114 Beldar day 1.46 645.00 941.70
(b) For heating bitumen:
0114 Beldar day 0.19 645.00 122.55
(c) For applying tack coat:
0114 Beldar day 0.47 645.00 303.15
TOTAL 2736.28
Add 1 % Water charges on "W" 27.36
TOTAL 2763.64
Add GST on "X" (multiplying factor 0.1405) 388.29
TOTAL 3151.94
Add 15% CPOH on "Y" 472.79
TOTAL 3624.73
Add Cess @ 1% on "Z" 36.25
Cost for 100 sqm. 3660.97
Cost per Sqm. 36.61
Say 36.60
16.31 Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including
the surface & cleaning with mechanical broom.
16.31.1 With rapid setting bitumen emulsion
16.31.1.1 On W.B.M / W.M.M. @ 0.4kg/sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 3500 sqm.
MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-
1995 tonne 1.40 18250.00 25550.00
2211 Carriage of Tar bitumen tonne 1.40 163.93 229.50
MACHINERY
0075 Road sweeper (Mechamical Broom) @ 1250 sqm. Per hour. hour 2.80 450.00 1260.00
0058 Air compressor hour 2.80 200.00 560.00
0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 2.00 700.00 1400.00
LABOUR
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 2.00 645.00 1290.00
TOTAL 30346.62
Add 1 % Water charges on "W" 303.47
TOTAL 30650.09
Add GST on "X" (multiplying factor 0.1405) 4306.34
TOTAL 34956.43
Add 15% CPOH on "Y" 5243.46
TOTAL 40199.89
Add Cess @ 1% on "Z" 402.00
Cost for 3500 sqm. 40601.89
Cost per Sqm. 11.60
Say 11.60

16.31.1.2 On bituminous surface @ 0.25kg/sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 3500 sqm.
MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-
1995 tonne 0.875 18250.00 15968.75
2211 Carriage of Tar bitumen tonne 0.875 163.93 143.44
MACHINERY
0075 Road sweeper (Mechamical Broom) @ 1250 sqm. Per hour. hour 2.80 450.00 1260.00
0058 Air compressor hour 2.80 200.00 560.00
0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 2.00 700.00 1400.00
LABOUR
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 2.00 645.00 1290.00
TOTAL 20679.31
Add 1 % Water charges on "W" 206.79
TOTAL 20886.10
Add GST on "X" (multiplying factor 0.1405) 2934.50
TOTAL 23820.60
Add 15% CPOH on "Y" 3573.09
TOTAL 27393.69
Add Cess @ 1% on "Z" 273.94
Cost for 3500 sqm. 27667.63
Cost per Sqm. 7.91
Say 7.90
16.31.2 With medium setting bitumen emulsion
16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 3500 sqm.
MATERIAL
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-
1995 tonne 1.40 27100.00 37940.00
2211 Carriage of Tar bitumen tonne 1.40 163.93 229.50
MACHINERY
0075 Road sweeper (Mechamical Broom) @ 1250 sqm. Per hour. hour 2.80 450.00 1260.00
0058 Air compressor hour 2.80 200.00 560.00
0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 2.00 700.00 1400.00
LABOUR
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 2.00 645.00 1290.00
TOTAL 42736.62
Add 1 % Water charges on "W" 427.37
TOTAL 43163.99
Add GST on "X" (multiplying factor 0.1405) 6064.54
TOTAL 49228.53
Add 15% CPOH on "Y" 7384.28
TOTAL 56612.81
Add Cess @ 1% on "Z" 566.13
Cost for 3500 sqm. 57178.94
Cost per Sqm. 16.34
Say 16.35

16.31.2.2 On bituminous surface @ 0.25kg/sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 3500 sqm.
MATERIAL
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-
1995 tonne 0.875 27100.00 23712.50
2211 Carriage of Tar bitumen tonne 0.875 163.93 143.44
MACHINERY
0075 Road sweeper (Mechamical Broom) @ 1250 sqm. Per hour. hour 2.80 450.00 1260.00
0058 Air compressor hour 2.80 200.00 560.00
0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 2.00 700.00 1400.00
LABOUR
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 2.00 645.00 1290.00
TOTAL 28423.06
Add 1 % Water charges on "W" 284.23
TOTAL 28707.29
Add GST on "X" (multiplying factor 0.1405) 4033.37
TOTAL 32740.66
Add 15% CPOH on "Y" 4911.10
TOTAL 37651.76
Add Cess @ 1% on "Z" 376.52
Cost for 3500 sqm. 38028.28
Cost per Sqm. 10.87
Say 10.85
16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per
and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot str
bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
16.32.1 With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 sqm.
Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
2916 Paving Asphalt VG 10 of approved quality tonne 0.144 24500.00 3528.00
2211 Carriage of Tar bitumen tonne 0.144 163.93 23.61
Solvent 70gms/kg. for 0.144 t = 10.08kg.
2914 Solvent kilogram 10.08 30.00 302.40
2342 Carriage of solvent/ Diesel. quintal 0.10 16.39 1.64
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.80 1200.00 2160.00
@1.80cum. per 100 sqm
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.90 1200.00 1080.00
@0.90cum. per 100 sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.70 163.93 442.61
Steam coal for heating bitumen @ 2 quintals per tonne of
bitumen = 2x0.144=0.288q
0370 Coal (steam) quintal 0.288 440.00 126.72
2200 Carriage of steam coal tonne 0.0288 187.35 5.40
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.57 645.00 367.65
(c) For screening and spreading premixed
aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 5.00 645.00 3225.00
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
(at barrier for night watch and for road roller)
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.13 800.00 104.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 14144.84
Add 1 % Water charges on "W" 141.45
TOTAL 14286.29
Add GST on "X" (multiplying factor 0.1405) 2007.22
TOTAL 16293.51
Add 15% CPOH on "Y" 2444.03
TOTAL 18737.54
Add Cess @ 1% on "Z" 187.38
Cost for 100 sqm. 18924.92
Cost per Sqm. 189.25
Say 189.25
16.32.2 With paving Asphalt grade VG - 30 with no solvent

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
Asphalt 60/70
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
7309 Paving Asphalt VG-30 of approved quality tonne 0.144 38150.00 5493.60
2211 Carriage of Tar bitumen tonne 0.144 163.93 23.61
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.80 1200.00 2160.00
@1.80cum. per 100sqm.
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.90 1200.00 1080.00
@0.90cum. per 100sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.70 163.93 442.61
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.144=0.288q
0370 Coal (steam) quintal 0.288 440.00 126.72
2200 Carriage of steam coal tonne 0.0288 187.35 5.40
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.57 645.00 367.65
(c) For screening and spreading premixed
aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 5.00 645.00 3225.00
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.13 800.00 104.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 15806.40
Add 1 % Water charges on "W" 158.06
TOTAL 15964.47
Add GST on "X" (multiplying factor 0.1405) 2243.01
TOTAL 18207.47
Add 15% CPOH on "Y" 2731.12
TOTAL 20938.60
Add Cess @ 1% on "Z" 209.39
Cost for 100 sqm. 21147.98
Cost per Sqm. 211.48
Say 211.50
16.32.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 sqm.
Refinery Modified Bitumen CRMB 55
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Modified Bitumen CRMB - 55 (Refinary produced)
:52xl.8+56x0.9=144kg. or 0.144 tonne
MATERIAL
7739 Modified Bitumen Refinary produced CRMB - 55 tonne 0.144 28000.00 4032.00
2211 Carriage of Tar bitumen tonne 0.144 163.93 23.61
Solvent 70gms/kg. for 0.144 t = 10.08kg
2914 Solvent kilogram 10.08 30.00 302.40
2342 Carriage of solvent/ Diesel. quintal 0.10 16.39 1.64
Stone chippings 13.2mm nominal size @ 1.80cum. per 100sqm.
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.80 1200.00 2160.00
@1.80cum. per 100sqm.
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.90 1200.00 1080.00
@0.90cum. per 100sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.70 163.93 442.61
Steam coal for heating bitumen @ 2 quintals per tonne of
bitumen = 2x0.144=0.288q
0370 Coal (steam) quintal 0.288 440.00 126.72
2200 Carriage of steam coal tonne 0.0288 187.35 5.40
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.57 645.00 367.65
(c) For screening and spreading premixed aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 5.00 645.00 3225.00
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.13 800.00 104.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 14648.84
Add 1 % Water charges on "W" 146.49
TOTAL 14795.33
Add GST on "X" (multiplying factor 0.1405) 2078.74
TOTAL 16874.07
Add 15% CPOH on "Y" 2531.11
TOTAL 19405.18
Add Cess @ 1% on "Z" 194.05
Cost for 100 sqm. 19599.24
Cost per Sqm. 195.99
Say 196.00
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 1
52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straigh
bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
16.33.1 With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
Paving Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum.
of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. Of aggregate @1.12cum. of
11.2mm nominal size.
Bitumen :52x2.25+56x1.12= 180kg
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.18 24500.00 4410.00
Solvent 0.07x180=12.60kg.
2914 Solvent kilogram 12.6 30.00 378.00
2211 Carriage of Tar bitumen tonne 0.18 163.93 29.51
2342 Carriage of solvent/ Diesel. quintal 0.126 16.39 2.07
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 2.25 1200.00 2700.00
@1.80cum. per 100 sqm.
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.12 1200.00 1344.00
@0.90cum. per 100 sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 3.37 163.93 552.44
2.25+1.12=3.37 cum
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.18=0.36q
0370 Coal (steam) quintal 0.36 440.00 158.40
2200 Carriage of steam coal tonne 0.036 187.35 6.74
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.71 645.00 457.95
(c) For screening and spreading premixed
aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 6.25 645.00 4031.25
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.15 800.00 120.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 16968.18
Add 1 % Water charges on "W" 169.68
TOTAL 17137.86
Add GST on "X" (multiplying factor 0.1405) 2407.87
TOTAL 19545.73
Add 15% CPOH on "Y" 2931.86
TOTAL 22477.59
Add Cess @ 1% on "Z" 224.78
Cost for 100 sqm. 22702.37
Cost per Sqm. 227.02
Say 227.00
16.33.2 With paving Asphalt grade VG - 30 with no solvent

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
Paving Asphalt 60/70
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum.
of 13.2mm nominal size
(ii) Hot bitumen @56kg. per cum. of stone [email protected].
of 11.2mm nominal size size Bitumen :52x2.25+50xl. 12= 180kg
MATERIAL
7309 Paving Asphalt VG-30 of approved quality tonne 0.18 38150.00 6867.00
2211 Carriage of Tar bitumen tonne 0.18 163.93 29.51
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 2.25 1200.00 2700.00
@2.25cum. per 100sqm
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.12 1200.00 1344.00
@1.12cum. per 100sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 3.37 163.93 552.44
2.25+1.12=3.37 cum.
0370 Coal (steam) quintal 0.36 440.00 158.40
2200 Carriage of steam coal tonne 0.036 187.35 6.74
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.71 645.00 457.95
(c) For cleaning, mixing and spreading pre-mix aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 6.25 645.00 4031.25
1.05x0.18)/0.267 = 0.71 Nos.
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.15 800.00 120.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 19045.12
Add 1 % Water charges on "W" 190.45
TOTAL 19235.57
Add GST on "X" (multiplying factor 0.1405) 2702.60
TOTAL 21938.16
Add 15% CPOH on "Y" 3290.72
TOTAL 25228.89
Add Cess @ 1% on "Z" 252.29
Cost for 100 sqm. 25481.18
Cost per Sqm. 254.81
Say 254.80
16.33.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 sqm.
MATERIAL
Refinery Modified Bitumen CRMB 55
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum.
of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. Of aggregate @1.12cum. of
11.2mm nominal size.
52x2.25+56x1.12=180kg
7739 Modified Bitumen Refinary produced CRMB - 55 tonne 0.18 28000.00 5040.00
Solvent 0.07x180=12.60kg
2914 Solvent kilogram 12.6 30.00 378.00
2211 Carriage of Tar bitumen tonne 0.18 163.93 29.51
2342 Carriage of solvent/ Diesel. quintal 0.126 16.39 2.07
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 2.25 1200.00 2700.00
@2.25 cum. per 100sqm
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.12 1200.00 1344.00
@1.12 cum. per 100sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 3.37 163.93 552.44
2.25+1.12=3.37 cum.+
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.18=0.36q
0370 Coal (steam) quintal 0.36 440.00 158.40
2200 Carriage of steam coal tonne 0.036 187.35 6.74
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
0128 Mate day 0.08 714.00 57.12
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen:
0114 Beldar day 0.71 645.00 457.95
(c) For screening and spreading premixed
aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 6.25 645.00 4031.25
(d) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.15 800.00 120.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
(e) Misc:
0364 Wire brush each 0.11 20.00 2.20
(with thick wire)
0365 Soft brush each 0.32 20.00 6.40
9999 Brooms and gunny bags L.S. 6.76 2.12 14.33
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 17598.18
Add 1 % Water charges on "W" 175.98
TOTAL 17774.16
Add GST on "X" (multiplying factor 0.1405) 2497.27
TOTAL 20271.43
Add 15% CPOH on "Y" 3040.71
TOTAL 23312.15
Add Cess @ 1% on "Z" 233.12
Cost for 100 sqm. 23545.27
Cost per Sqm. 235.45
Say 235.45
16.34 2 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2 mm nominal size per 100 sqm and
bitumen emulsion (medium setting min. 65% bitumen content) complying with IS : 8887, using 96 kg per cum of chippings, including conso
with road roller of 6 to 9 tonne capacity etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x2.4=230kg =0.230t
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-
1995 tonne 0.23 27100.00 6233.00
2211 Carriage of Tar bitumen tonne 0.23 163.93 37.70
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 2.40 1200.00 2880.00
@ 2.4cum. per 100 sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.40 163.93 393.43
LABOUR
(a) For mixing and spreading premix aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 3.54 645.00 2283.30
(b) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.04 3500.00 140.00
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 12719.20
Add 1 % Water charges on "W" 127.19
TOTAL 12846.40
Add GST on "X" (multiplying factor 0.1405) 1804.92
TOTAL 14651.32
Add 15% CPOH on "Y" 2197.70
TOTAL 16849.01
Add Cess @ 1% on "Z" 168.49
Cost for 100 sqm. 17017.50
Cost per Sqm. 170.18
Say 170.20

16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium
min. 65% bitumen contents) complying with IS : 8887, using 96 kg per
cum of chippings of road surface, including consolidation with road roller etc complete .

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 sqm.
MATERIAL
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x3 = 288 kg = 0.288 t
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-
1995 tonne 0.288 27100.00 7804.80
2211 Carriage of Tar bitumen tonne 0.288 163.93 47.21
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 3.00 1200.00 3600.00
@ 3.00 cum. per 100 sqm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 3.00 163.93 491.79
LABOUR
(a) For mixing and spreading premix
aggregate :
0130 Mistry day 0.19 784.00 148.96
0114 Beldar day 4.10 645.00 2644.50
(b) Consolidation Charges
0113 Chowkidar day 0.27 645.00 174.15
0101 Bhisti day 0.11 714.00 78.54
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.11 3000.00 330.00
9999 Sundries L.S. 9.49 2.12 20.12
TOTAL 15340.07
Add 1 % Water charges on "W" 153.40
TOTAL 15493.47
Add GST on "X" (multiplying factor 0.1405) 2176.83
TOTAL 17670.30
Add 15% CPOH on "Y" 2650.55
TOTAL 20320.85
Add Cess @ 1% on "Z" 203.21
Cost for 100 sqm. 20524.06
Cost per Sqm. 205.24
Say 205.25
16.36 Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with b
suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tippe
mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate s
complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surfac
16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of siz
graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @
50 kg/ 10 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 370 sqm.
MATERIAL
Taking stone aggregate 40mm = 45%
20mm = 44%
11.2mm = 8%
Stone dust = 3%
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 9.99 1300.00 12987.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 9.77 1400.00 13678.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1.78 1350.00 2403.00
1159 Stone dust cum 0.6 1100.00 660.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 2.33 1400.00 3262.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 2.66 1350.00 3591.00
1159 Stone dust cum 0.56 1100.00 616.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 9.99 178.19 1780.12
2202 Carriage of Stone aggregate below 40 mm nominal size i.e. 20
mm cum 12.1 163.93 1983.55
2202 Carriage of Stone aggregate below 40 mm nominal size cum 4.44 163.93 727.85
2267 Carriage of Stone dust cum 1.16 163.93 190.16
2916 Paving Asphalt VG -10 of approved quality tonne 1.85 24500.00 45325.00
@ 50kg/10 sqm.
2211 Carriage of Tar bitumen tonne 1.85 163.93 303.27
(B) Labour:
0114 Beldar day 16.67 645.00 10752.15
for spreading stone metal
0114 Beldar day 5.33 645.00 3437.85
for hand packing
0114 Beldar day 2.67 645.00 1722.15
dry rolling
0114 Beldar day 1.33 645.00 857.85
Bajri spreader
0138 Sprayer (for bitumen, tar etc.) day 0.67 714.00 478.38
0114 Beldar day 1.33 645.00 857.85
for spreading key aggregate
0114 Beldar day 6.67 645.00 4302.15
for spraying bitumen
0114 Beldar day 0.67 645.00 432.15
of power roller
0128 Mate day 1.77 714.00 1263.78
(C) Machinery :
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.45 800.00 360.00
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.61 3000.00 1830.00
9999 Misc. items as spray nozzle, joint paper, coconut oil, country
soap etc. L.S. 351 2.12 744.12
TOTAL 114545.38
Add 1 % Water charges on "W" 1145.45
TOTAL 115690.83
Add GST on "X" (multiplying factor 0.1405) 16254.56
TOTAL 131945.40
Add 15% CPOH on "Y" 19791.81
TOTAL 151737.20
Add Cess @ 1% on "Z" 1517.37
Cost for 370 Sqm. 153254.58
Cost per sqm. 414.20
Say 414.20
16.36.2 For 75 mm compacted thickness in two layers using stone aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm key agg
size 20.0 mm graded @ 0.18 cum per 10 sqm. With paving asphalt grade VG - 10 @ 68 kg/10 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 300 sqm.
MATERIAL
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 8.10 178.19 1443.34
0292 Stone Aggregate (Single size) : 50 mm nominal size cum 8.10 1000.00 8100.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 14.58 1400.00 20412.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 4.32 1350.00 5832.00
0294 Stone Aggregate (Single size) : 25 mm nominal size cum 2.05 1350.00 2767.50
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 2.57 1350.00 3469.50
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.81 1350.00 1093.50
2916 Paving Asphalt VG -10 of approved quality tonne 2.04 24500.00 49980.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 24.33 163.93 3988.42
2211 Carriage of Tar bitumen tonne 2.04 163.93 334.42
LABOUR
0114 Beldar day 25.00 645.00 16125.00
for spreading stone metal
0114 Beldar day 8.00 645.00 5160.00
for hand packing
0114 Beldar day 4.00 645.00 2580.00
dry rolling
0114 Beldar day 2.00 645.00 1290.00
/Bajri spreader
0138 Sprayer (for bitumen, tar etc.) day 1.00 714.00 714.00
0114 Beldar day 2.00 645.00 1290.00
for spreading key aggregate
0114 Beldar day 10.00 645.00 6450.00
for spraying bitumen
0114 Beldar day 1.00 645.00 645.00
road roller
0128 Mate day 2.65 714.00 1892.10
MACHINERY
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.50 800.00 400.00
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.75 3000.00 2250.00
9999 Misc. items as spray nozzle, joint paper, coconut oil, country
soap etc. L.S. 429 2.12 909.48
TOTAL 137126.25
Add 1 % Water charges on "W" 1371.26
TOTAL 138497.52
Add GST on "X" (multiplying factor 0.1405) 19458.90
TOTAL 157956.42
Add 15% CPOH on "Y" 23693.46
TOTAL 181649.88
Add Cess @ 1% on "Z" 1816.50
Cost for 300 Sqm. 183466.38
Cost per sqm. 611.55
Say 611.55
16.37 Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming
prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grai
stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both direction
into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considerin
using 10.2% as per
MORTH specification).

16.37.1 25 mm thick
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for surface area of 17.40 sqm for single layer of
25 mm finished thickness.
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c
Volume of bitumen mastic = 1000/2300= 0.435 cum surface
area = 0.435/0.025 = 17.4 sqm.
(i) Bitumen of penetration 85/25 @ 10.2% by weight of mix
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.102 34790.00 3548.58
2211 Carriage of Tar bitumen tonne 0.102 163.93 16.72
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.02 1400.00 28.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 0.202 1350.00 272.70
(iii) Weight of fine aggregate @ 15%
850 x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083 cum
1159 Stone dust cum 0.083 1100.00 91.30
(iv) Weight of lime stone dust @ 45% (850- 340-127.5) = 382.50
kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
0784 Marble dust/ powder cum 0.174 1130.00 196.62
(v) Precoated stone chipping for surface finish: Volume of chips
@ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say 0.009
cum
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.009 1350.00 12.15
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.0003 34790.00 10.44
2211 Carriage of Tar bitumen tonne 0.0003 163.93 0.05
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.231 163.93 37.87
(0.222 + 0.009) =0.231 cum.
2267 Carriage of Stone dust cum 0.083 163.93 13.61
2208 Carriage of Lime cum 0.174 163.93 28.52
LABOUR
0139 Skilled Beldar (for floor rubbing etc.) day 1.50 714.00 1071.00
0130 Mistry day 0.50 784.00 392.00
0138 Sprayer (for bitumen, tar etc.) day 3.50 714.00 2499.00
0139 Skilled Beldar (for floor rubbing etc.) day 0.25 714.00 178.50
0128 Mate day 0.50 714.00 357.00
0016 Mastic Cooker day 0.50 750.00 375.00
9999 sundries (Sealing of joints, placing angles, wastage materials)
L.S. 153.27 2.12 324.93
TOTAL 9453.99
Add 1 % Water charges on "W" 94.54
TOTAL 9548.53
Add GST on "X" (multiplying factor 0.1405) 1341.57
TOTAL 10890.10
Add 15% CPOH on "Y" 1633.51
TOTAL 12523.61
Add Cess @ 1% on "Z" 125.24
Cost for 17.40 sqm 12648.85
Cost per sqm 726.95
Say 726.95
16.37.2 40 mm thick
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for surface area of 10.875sqm for single layer of
40 mm finished thickness.
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c
Volume of bitumen mastic = 1000/2300= 0.435 cum surface
area = 0.435/0.040 = 10.875 sqm.
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.102 34790.00 3548.58
2211 Carriage of Tar bitumen tonne 0.102 163.93 16.72
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.02 1400.00 28.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 0.202 1350.00 272.70
(iii) Weight of fine aggregate @ 15% 850 x15/100 = 127.5 kg.,
volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum
1159 Stone dust cum 0.083 1100.00 91.30
(iv) Weight of lime stone dust @ 45% (850-340-127.5) = 382.50
kg., Volume of lime stone dust 382.50/2200 =0.174 cum.
0784 Marble dust/ powder cum 0.174 1130.00 196.62
(v) Precoated stone chipping for surface finish: Volume of chips
@ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say 0.009
cum
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.009 1350.00 12.15
Bitumen for precoated stone chipping @
2%=0.009x1600x2/100= 0.288 say 0.30 kg.
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.0003 34790.00 10.44
2211 Carriage of Tar bitumen tonne 0.0003 163.93 0.05
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.231 163.93 37.87
(0.222 + 0.009) =0.231 cum
2267 Carriage of Stone dust cum 0.083 163.93 13.61
2208 Carriage of Lime cum 0.174 163.93 28.52
for mastic cooker (Taking capacity of cooker as one tonne)
LABOUR
0139 Skilled Beldar (for floor rubbing etc.) day 1.50 714.00 1071.00
0130 Mistry day 0.50 784.00 392.00
0138 Sprayer (for bitumen, tar etc.) day 3.50 714.00 2499.00
0139 Skilled Beldar (for floor rubbing etc.) day 0.25 714.00 178.50
0128 Mate day 0.50 714.00 357.00
0016 Mastic Cooker day 0.50 750.00 375.00
9999 sundries (Sealing of joints, placing angles, wastage materials)
L.S. 153.27 2.12 324.93
TOTAL 9453.99
Add 1 % Water charges on "W" 94.54
TOTAL 9548.53
Add GST on "X" (multiplying factor 0.1405) 1341.57
TOTAL 10890.10
Add 15% CPOH on "Y" 1633.51
TOTAL 12523.61
Add Cess @ 1% on "Z" 125.24
Cost for 10.875 sqm 12648.85
Cost per sqm 1163.11
Say 1163.10
16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and
10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand @ 1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of s
chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10
tonne etc. complete. (tack coat to be paid separately) :

16.38.1 With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of
asphalt

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
80/100 bitumen @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.303 24500.00 7423.50
Solvent 0.070 kg. x 303 kg. = 21.21kg
2914 Solvent kilogram 21.21 30.00 636.30
2211 Carriage of Tar bitumen tonne 0.303 163.93 49.67
2342 Carriage of solvent/ Diesel. quintal 0.212 16.39 3.47
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 0.99 1200.00 1188.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.66 1200.00 792.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.65 163.93 270.48
0370 Coal (steam) quintal 0.606 440.00 266.64
2200 Carriage of steam coal tonne 0.0606 187.35 11.35
0982 Coarse sand (zone III) cum 1.65 1500.00 2475.00
2203 Carriage of Coarse sand cum 1.65 163.93 270.48
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.19 645.00 767.55
(c) For cleaning, mixing and spreading pre-mix aggregate :
0130 Mistry day 0.24 784.00 188.16
0114 Beldar day 6.12 645.00 3947.40
(d) Consolidation charges :
0113 Chowkidar day 0.34 645.00 219.30
(at barriers for night watch and for road roller)
0101 Bhisti day 0.13 714.00 92.82
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.13 3000.00 390.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.21 800.00 168.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.05 3500.00 175.00
(e) Misc :
Wire brush (with thick wire)
0364 Wire brush each 0.13 20.00 2.60
0365 Soft brush each 0.40 20.00 8.00
9999 Brooms and gunny bags L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.97 2.12 19.02
TOTAL 21300.15
Add 1 % Water charges on "W" 213.00
TOTAL 21513.15
Add GST on "X" (multiplying factor 0.1405) 3022.60
TOTAL 24535.75
Add 15% CPOH on "Y" 3680.36
TOTAL 28216.11
Add Cess @ 1% on "Z" 282.16
Cost for 100 sqm. 28498.28
Cost per sqm. 284.98
Say 285.00
16.38.2 With paving Asphalt grade VG - 30
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100sqm.
60/70 bitumen @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total= 0.303t
MATERIAL
7309 Paving Asphalt VG-30 of approved quality tonne 0.303 38150.00 11559.45
2211 Carriage of Tar bitumen tonne 0.303 163.93 49.67
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 0.99 1200.00 1188.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.66 1200.00 792.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.65 163.93 270.48
Steam coal for heating bitumen @ 2 quintals per tonne of
bitumen = 2x0.303=0.606q
0370 Coal (steam) quintal 0.606 440.00 266.64
2200 Carriage of steam coal tonne 0.0606 187.35 11.35
0982 Coarse sand (zone III) cum 1.65 1500.00 2475.00
2203 Carriage of Coarse sand cum 1.65 163.93 270.48
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.19 645.00 767.55
(c) For cleaning, mixing and spreading
pre-mix aggregate :
0130 Mistry day 0.24 784.00 188.16
0114 Beldar day 6.12 645.00 3947.40
(d) Consolidation charges :
0113 Chowkidar day 0.34 645.00 219.30
(at barriers for night watch and for road roller)
0101 Bhisti day 0.13 714.00 92.82
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.13 3000.00 390.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.21 800.00 168.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.05 3500.00 175.00
(e) Misc :
0364 Wire brush each 0.13 20.00 2.60
(with thick wire)
0365 Soft brush each 0.40 20.00 8.00
9999 Brooms and gunny bags L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.97 2.12 19.02
TOTAL 24796.33
Add 1 % Water charges on "W" 247.96
TOTAL 25044.29
Add GST on "X" (multiplying factor 0.1405) 3518.72
TOTAL 28563.01
Add 15% CPOH on "Y" 4284.45
TOTAL 32847.47
Add Cess @ 1% on "Z" 328.47
Cost for 100 sqm. 33175.94
Cost per sqm. 331.76
Say 331.75
16.38.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
MATERIAL
7739 Modified Bitumen Refinary produced CRMB - 55 tonne 0.303 28000.00 8484.00
@56kg. per cum. of aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total = 0.303 t
2914 Solvent kilogram 21.21 30.00 636.30
0.070 kg. x 303 kg. = 21.21kg
2211 Carriage of Tar bitumen tonne 0.303 163.93 49.67
2342 Carriage of solvent/ Diesel. quintal 0.212 16.39 3.47
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 0.99 1200.00 1188.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 0.66 1200.00 792.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 1.65 163.93 270.48
0370 Coal (steam) quintal 0.606 440.00 266.64
2200 Carriage of steam coal tonne 0.0606 187.35 11.35
0982 Coarse sand (zone III) cum 1.65 1500.00 2475.00
2203 Carriage of Coarse sand cum 1.65 163.93 270.48
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.19 645.00 767.55
(c) For cleaning, mixing and spreading pre-mix aggregate :
0130 Mistry day 0.24 784.00 188.16
0114 Beldar day 6.12 645.00 3947.40
(d) Consolidation charges :
0113 Chowkidar day 0.34 645.00 219.30
0101 Bhisti day 0.13 714.00 92.82
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.13 3000.00 390.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.21 800.00 168.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.05 3500.00 175.00
(e) Misc :
0364 Wire brush each 0.13 20.00 2.60
(with thick wire)
0365 Soft brush each 0.40 20.00 8.00
9999 Brooms and gunny bags L.S. 7.15 2.12 15.16
9999 Sundries L.S. 8.97 2.12 19.02
TOTAL 22360.65
Add 1 % Water charges on "W" 223.61
TOTAL 22584.26
Add GST on "X" (multiplying factor 0.1405) 3173.09
TOTAL 25757.35
Add 15% CPOH on "Y" 3863.60
TOTAL 29620.95
Add Cess @ 1% on "Z" 296.21
Cost for 100 sqm. 29917.16
Cost per sqm. 299.17
Say 299.15
16.39 4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 4
mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of ston
and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. comp
coat to be paid separately) :
16.39.1 With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.479 24500.00 11735.50
@56kg. per cum. of aggregate and 128kg.
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
2914 Solvent kilogram 33.53 30.00 1005.90
0.70kg.x479=33.53kg
2342 Carriage of solvent/ Diesel. quintal 0.335 16.39 5.49
2211 Carriage of Tar bitumen tonne 0.479 163.93 78.52
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.56 1200.00 1872.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.04 1200.00 1248.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.60 163.93 426.22
0982 Coarse sand (zone III) cum 2.60 1500.00 3900.00
2203 Carriage of Coarse sand cum 2.60 163.93 426.22
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen = 2x0.479=0.958q
0370 Coal (steam) quintal 0.958 440.00 421.52
2200 Carriage of steam coal tonne 0.0958 187.35 17.95
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.88 645.00 1212.60
(c) For cleaning, mixing and spreading
pre-mix aggregate :
0130 Mistry day 0.31 784.00 243.04
0114 Beldar day 9.46 645.00 6101.70
(d) Consolidation charges :
0113 Chowkidar day 0.45 645.00 290.25
0101 Bhisti day 0.18 714.00 128.52
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.18 3000.00 540.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.30 800.00 240.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.03 3500.00 105.00
(e) Misc :
0364 Wire brush each 0.09 20.00 1.80
(with thick wire)
0365 Soft brush each 0.27 20.00 5.40
9999 Brooms and gunny bags L.S. 5.33 2.12 11.30
9999 Sundries L.S. 16.12 2.12 34.17
TOTAL 31971.34
Add 1 % Water charges on "W" 319.71
TOTAL 32291.05
Add GST on "X" (multiplying factor 0.1405) 4536.89
TOTAL 36827.95
Add 15% CPOH on "Y" 5524.19
TOTAL 42352.14
Add Cess @ 1% on "Z" 423.52
Cost for 100 sqm. 42775.66
Cost per sqm. 427.76
Say 427.75
16.39.2 With paving asphalt grade VG - 30 with no solvent
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100sqm.
MATERIAL
7309 Paving Asphalt VG-30 of approved quality tonne 0.479 38150.00 18273.85
@56kg. per cum. of aggregate and 128kg.
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
2211 Carriage of Tar bitumen tonne 0.479 163.93 78.52
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.56 1200.00 1872.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.04 1200.00 1248.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.60 163.93 426.22
0982 Coarse sand (zone III) cum 2.60 1500.00 3900.00
2203 Carriage of Coarse sand cum 2.60 163.93 426.22
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen =2x0.479=0.958 qtl
0370 Coal (steam) quintal 0.958 440.00 421.52
2200 Carriage of steam coal tonne 0.0958 187.35 17.95
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.88 645.00 1212.60
(c) For cleaning, mixing and spreading
pre-mix aggregate :
0130 Mistry day 0.31 784.00 243.04
0114 Beldar day 9.46 645.00 6101.70
(d) Consolidation charges :
0113 Chowkidar day 0.45 645.00 290.25
0101 Bhisti day 0.18 714.00 128.52
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.18 3000.00 540.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.30 800.00 240.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.03 3500.00 105.00
(e) Brushes etc. for cleaning :-
0364 Wire brush each 0.09 20.00 1.80
(with thick wire)
0365 Soft brush each 0.27 20.00 5.40
9999 Brooms and gunny bags L.S. 5.33 2.12 11.30
9999 Sundries L.S. 16.12 2.12 34.17
TOTAL 37498.30
Add 1 % Water charges on "W" 374.98
TOTAL 37873.28
Add GST on "X" (multiplying factor 0.1405) 5321.20
TOTAL 43194.48
Add 15% CPOH on "Y" 6479.17
TOTAL 49673.65
Add Cess @ 1% on "Z" 496.74
Cost for 100 sqm. 50170.39
Cost per sqm. 501.70
Say 501.70
16.39.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100sqm.
MATERIAL
7739 Modified Bitumen Refinary produced CRMB - 55 tonne 0.479 28000.00 13412.00
@56kg. per cum. of aggregate and 128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 tonne
2914 Solvent kilogram 33.53 30.00 1005.90
0.70kg.x479=33.53kg.
2342 Carriage of solvent/ Diesel. quintal 0.335 16.39 5.49
2211 Carriage of Tar bitumen tonne 0.479 163.93 78.52
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1.56 1200.00 1872.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1.04 1200.00 1248.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 2.60 163.93 426.22
0982 Coarse sand (zone III) cum 2.60 1500.00 3900.00
2203 Carriage of Coarse sand cum 2.60 163.93 426.22
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen = 2x0.479=0.958q
0370 Coal (steam) quintal 0.958 440.00 421.52
2200 Carriage of steam coal tonne 0.0958 187.35 17.95
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.16 714.00 114.24
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(b) For heating bitumen :
0114 Beldar day 1.88 645.00 1212.60
(c) For cleaning, mixing and spreading pre-mix aggregate :
0130 Mistry day 0.31 784.00 243.04
0114 Beldar day 9.46 645.00 6101.70
(d) Consolidation charges :
0113 Chowkidar day 0.45 645.00 290.25
0101 Bhisti day 0.18 714.00 128.52
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.18 3000.00 540.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.30 800.00 240.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.03 3500.00 105.00
(e) Misc :
0364 Wire brush each 0.09 20.00 1.80
(with thick wire)
0365 Soft brush each 0.27 20.00 5.40
9999 Brooms and gunny bags L.S. 5.33 2.12 11.30
9999 Sundries L.S. 16.12 2.12 34.17
TOTAL 33647.84
Add 1 % Water charges on "W" 336.48
TOTAL 33984.32
Add GST on "X" (multiplying factor 0.1405) 4774.80
TOTAL 38759.12
Add 15% CPOH on "Y" 5813.87
TOTAL 44572.98
Add Cess @ 1% on "Z" 445.73
Cost for 100 sqm. 45018.71
Cost per sqm. 450.19
Say 450.20
16.40 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen u
of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rollin
finishing with road roller all
complete.
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100sqm.
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.0768 24500.00 1881.60
@ 128kg/cum. of sand 128x0.60 =
76.80kg. = 0.0768 m.t
2211 Carriage of Tar bitumen tonne 0.0768 163.93 12.59
0982 Coarse sand (zone III) cum 0.60 1500.00 900.00
2203 Carriage of Coarse sand cum 0.60 163.93 98.36
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen =2x0.768=0.1536 qtl
0370 Coal (steam) quintal 1.536 440.00 675.84
2200 Carriage of steam coal tonne 0.1536 187.35 28.78
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning :
0128 Mate day 0.06 714.00 42.84
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.97 645.00 625.65
(b) For heating bitumen :
0114 Beldar day 0.30 645.00 193.50
0.38/96x76.8
(c) For cleaning, mixing and spreading
pre-mix aggregate :
0114 Beldar day 1.11 645.00 715.95
11.39/0.75x0.60
0130 Mistry day 0.05 784.00 39.20
0.06/0.75x0.60
(d) Miscellaneous :
0113 Chowkidar day 0.15 645.00 96.75
0101 Bhisti day 0.06 714.00 42.84
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.06 3000.00 180.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.05 800.00 40.00
0023 Hot Bitumen mixer 0.5 cum i/c hand cart day 0.01 3500.00 35.00
(e) Misc :
0364 Wire brush each 0.05 20.00 1.00
(with thick wire)
0365 Soft brush each 0.12 20.00 2.40
9999 Sundries L.S. 18.20 2.12 38.58
TOTAL 5966.93
Add 1 % Water charges on "W" 59.67
TOTAL 6026.60
Add GST on "X" (multiplying factor 0.1405) 846.74
TOTAL 6873.34
Add 15% CPOH on "Y" 1031.00
TOTAL 7904.34
Add Cess @ 1% on "Z" 79.04
Cost for 100 sqm. 7983.38
Cost per sqm. 79.83
Say 79.85
16.41 Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spr
98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retaine
mm sieve) per 100 sqm
of road surface, including rolling and finishing with power road roller all complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100sqm.
MATERIAL
2916 Paving Asphalt VG -10 of approved quality tonne 0.098 24500.00 2401.00
2211 Carriage of Tar bitumen tonne 0.098 163.93 16.07
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 0.90 1400.00 1260.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.90 163.93 147.54
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen =2x0.098=1.96 qtl
0370 Coal (steam) quintal 1.96 440.00 862.40
2200 Carriage of steam coal tonne 0.196 187.35 36.72
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For heating and spraying bitumen :
0130 Mistry day 0.04 784.00 31.36
0138 Sprayer (for bitumen, tar etc.) day 0.06 714.00 42.84
0114 Beldar day 0.69 645.00 445.05
(b) For cleaning :
0128 Mate day 0.11 714.00 78.54
0114 Beldar day 1.40 645.00 903.00
0115 Coolie day 1.40 645.00 903.00
(c) For screening and spraying aggregate :
0128 Mate day 0.05 714.00 35.70
0114 Beldar day 0.51 645.00 328.95
(d) Misc :
0113 Chowkidar day 0.15 645.00 96.75
0101 Bhisti day 0.06 714.00 42.84
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 0.06 3000.00 180.00
0007 Hire charges of Coaltar Sprayer day 0.06 350.00 21.00
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 0.06 800.00 48.00
(e) Misc :
0364 Wire brush each 0.05 20.00 1.00
(with thick wire)
0365 Soft brush each 0.12 20.00 2.40
9999 Sundries L.S. 18.20 2.12 38.58
9999 Brooms and gunny bags L.S. 2.73 2.12 5.79
TOTAL 7928.52
Add 1 % Water charges on "W" 79.29
TOTAL 8007.81
Add GST on "X" (multiplying factor 0.1405) 1125.10
TOTAL 9132.91
Add 15% CPOH on "Y" 1369.94
TOTAL 10502.84
Add Cess @ 1% on "Z" 105.03
Cost for 100 sqm. 10607.87
Cost per sqm. 106.08
Say 106.10
16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to require
camber in panels as required including consolidation finishing and tamping complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1.00 cum.
MATERIAL
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.52 1300.00 676.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.22 1400.00 308.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.11 1350.00 148.50
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 0.52 178.19 92.66
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.33 163.93 54.10
0982 Coarse sand (zone III) cum 0.445 1500.00 667.50
2203 Carriage of Coarse sand cum 0.445 163.93 72.95
0367 Portland Cement (OPC-43 grade) tonne 0.32 5000.00 1600.00
2209 Carriage of Cement tonne 0.32 145.72 46.63
LABOUR
0155 Mason (average) day 0.10 749.00 74.90
0114 Beldar day 1.63 645.00 1051.35
0101 Bhisti day 0.70 714.00 499.80
MACHINERY
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with hooper
day 0.077 800.00 61.60

0012 Vibrator (Needle type 40 mm) day 0.07 350.00 24.50


9999 Sundries L.S. 26.00 2.12 55.12
Side shuttering
Taking the slab to be 5cm thick and width to be 6 metre, length
of road 27 metre = 9.90/24.30 = 0.407 sqm
5.9.1 Rate as per item no 5.9.1 of SH : Reinforced cement concrete
work sqm 0.407 307.95 125.34
9999 Sundries L.S. 1.43 2.12 3.03
TOTAL 5561.97
Add 1 % Water charges on "W-A" 54.37
TOTAL 5616.34
Add GST on "X-A" (multiplying factor 0.1405) 771.49
TOTAL 6387.82
Add 15% CPOH on "Y-A" 939.37
TOTAL 7327.20
Add Cess @ 1% on "Z-A" 72.02
Cost for 1 cum. 7399.22
Say 7399.20
16.43 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per de
using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criter
providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and su
vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, c
making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, pro
filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel b
sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately
16.43.1 Cement concrete prepared with batch mixing machine

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
0367 Portland Cement (OPC-43 grade) tonne 0.34 5000.00 1700.00
2209 Carriage of Cement tonne 0.34 145.72 49.54
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.52 1300.00 676.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.22 1350.00 297.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.11 1350.00 148.50
0982 Coarse sand (zone III) cum 0.445 1500.00 667.50
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 0.52 178.19 92.66
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.33 163.93 54.10
2203 Carriage of Coarse sand cum 0.445 163.93 72.95
LABOUR :- FOR MIXING AND LAYING
0114 Beldar day 2.00 645.00 1290.00
0101 Bhisti day 0.27 714.00 192.78
0123 Mason (brick layer) 1st class day 0.05 784.00 39.20
0124 Mason (brick layer) 2nd class day 0.05 714.00 35.70
0128 Mate day 0.04 714.00 28.56
For compaction by vibrator
0155 Mason (average) day 0.07 749.00 52.43
0114 Beldar day 0.07 645.00 45.15
MACHINERY
0004 Production cost of concrete by batch mix plant. cum 1.00 400.00 400.00
(Assuming 25 cum. per day)
0009 Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc. cum 1.00 210.00 210.00
0021 Pin vibrator day 0.025 250.00 6.25
(SHP) with 50 cum. output per day
0022 Surface Vibrator day 0.05 300.00 15.00
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH: Road work cum 1.00 915.85 915.85
9999 Cutting and making joints L.S. 50.00 2.12 106.00
TOTAL 7095.17
Add 1 % Water charges on "W" 70.95
TOTAL 7166.12
Add GST on "X" (multiplying factor 0.1405) 1006.84
TOTAL 8172.96
Add 15% CPOH on "Y" 1225.94
TOTAL 9398.91
Add Cess @ 1% on "Z" 93.99
Cost per cum. 9492.89
Say 9492.90
16.43.2 Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 cum.
MATERIAL
0367 Portland Cement (OPC-43 grade) tonne 0.34 5000.00 1700.00
2209 Carriage of Cement tonne 0.34 145.72 49.54
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.52 1300.00 676.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.22 1400.00 308.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.11 1350.00 148.50
0982 Coarse sand (zone III) cum 0.445 1500.00 667.50
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 0.52 178.19 92.66
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.33 163.93 54.10
2203 Carriage of Coarse sand cum 0.445 163.93 72.95
LABOUR :- FOR MIXING AND LAYING
0114 Beldar day 2.00 645.00 1290.00
0101 Bhisti day 0.27 714.00 192.78
0123 Mason (brick layer) 1st class day 0.05 784.00 39.20
0124 Mason (brick layer) 2nd class day 0.05 714.00 35.70
0128 Mate day 0.04 714.00 28.56
For compaction by vibrator
0155 Mason (average) day 0.07 749.00 52.43
0114 Beldar day 0.07 645.00 45.15
MACHINERY
0004 Production cost of concrete by batch mix plant. cum 1.00 400.00 400.00
(Assuming 25 cum. per day)
0029 Carriage of concrete by transit mixer. km/ cum 10.00 37.30 373.00
0009 Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc. cum 1.00 210.00 210.00
0021 Pin vibrator day 0.025 250.00 6.25
(SHP) with 50 cum. output per day
0022 Surface Vibrator day 0.05 300.00 15.00
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH: Road work cum 1.00 915.85 915.85
9999 Cutting and making joints L.S. 50.00 2.12 106.00
TOTAL 7479.17
Add 1 % Water charges on "W" 74.79
TOTAL 7553.96
Add GST on "X" (multiplying factor 0.1405) 1061.33
TOTAL 8615.29
Add 15% CPOH on "Y" 1292.29
TOTAL 9907.59
Add Cess @ 1% on "Z" 99.08
Cost per cum. 10006.66
Say 10006.65
16.43A Annexure ‘A’ to Item number 16.43
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 8.5 cum. MATERIAL:
(i) Painting with primer
(i) Construction joint 6.15m. long 30cm deep 6.15x(0.30+0.01)= 1.91sqm.
+
(ii) Dummy joints
4.61m long and 10cm deep 10mm wide 4.6 lx(0.10+0.10+0.01) = 0.97
sqm.
= 2.88 sqm.
2.88sqm. @0.26 lit./sqm. = 0.75 lit. + Add 5% wastage = 0.03
Total =0.78 lit
Bitumen solution primer of approved quality

0316 litre 0.78 47.00 36.66


9977 Carriage L.S. 0.91 2.12 1.93
0314 (ii) Joint sealing compound (GradeA) for construction joint 6.15m long kilogram L.S. 9.68 29.00 280.72
9977 10mm wide 25mm deep. quintal L.S. 0.91 2.12 1.93
0370 6.15x2x2.5cm = 3075cucm For dummy joints 461xl.0xl0cm. = 4610cucm. day day 0.015 440.00 6.60
9977 Total = 7685 cum day day 0.91 2.12 1.93
0123 Add 5% wastage = 384 cucm Total = 8069 cucm 3.00 784.00 2352.00
0131 Say 8.07 cudm. @1.2kg/cudm = 9.68 kg Bitumen hot sealing compound : 0.10 714.00 71.40
0124 grade A Carriage 0.25 714.00 178.50
0114 Coal (steam) Carriage LABOUR: 0.68 645.00 438.60
(ii) For applying primer qty. = 2.88 sqm Mason (brick layer) 1st class 3370.27
Painter 3370.27
(iii) Labour for heating and filling sealing compound. 396.50
Mason (brick layer) 2nd class 396.50
(iv) Beldar for heating, carrying and pouring of bitumen Beldar
TOTAL
Cost for 8.5 cum Cost per cum. Say

16.43B Annexure ‘B’ to Item number 16.43


Code Description Unit Quantity Rate Rs. Amount Rs.
ANALYSIS OF ANNEXTURE 'B' 16.43B (Required in 16.43)
STEEL FORM WORK :
Part-I Cost of materials :
Assuming that pavement 30m long 22.5m wide and 0.30m deep having
panel size 6.15x4.61x0.30m or 8.50cu. laid in a day of 8 hrs. Hence form
work to be provided for 2 days.
MATERIAL 22x30.75 = 676.50
2x46.10 = 92.20
Total = 768.70m.
768.70 @ 83.10 kg/ m = 25.44 M.T.
Assuming that channel will become unserviceable after use for 5000 slab
(100 times) and salvage value of steel shall fetch 20% of its basic cost.
Structurals such as tees,angles channels and R.S. joists Carriage of Steel
Part-II Labour for assembling, errection, dismeritelling and cleaning the
shuttering. Assuming that 255 labour for steel shuttering shall be required
as compared to timber shuttering. Contact area of 50 slabs of steel
shuttering.
Long channel = 11x20x0.30 = 66.00 201.52
= 2x45.10x0.30 = 27.06 0.59
1007 Total= 93.06 LABOUR 0.0407104 4950.00 2042.04
2205 Blacksmith 2nd class Beldar quintal tonne 0.00407104 145.72 1844.70
0103 Carriage of steel for extra lead of runway Beldar day day 2.86 714.00 3695.85
0114 TOTAL day 2.86 645.00 7784.70
0114 Cost for 50 slabs / 8.5 cum Cost per cum. 5.73 645.00 7784.70
Say 915.85
915.85

16.44
Extra for providing and mixing hardening compound of approved quality as per manufacturer's
specification in cement concrete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 litre MATERIAL
Hardening compound
7254 (including cartage) litre 1.00 36.00 36.00

TOTAL 36.00
Add 1 % Water charges on "W" TOTAL 0.36
Add GST on "X" (multiplying factor 0.1405) TOTAL 36.36
Add 15% CPOH on "Y" TOTAL 5.11
Add Cess @ 1% on "Z" Cost per litre 41.47
Say 6.22
47.69
0.48
48.17
48.15

16.45 Providing and fixing in position pre-moulded joint filler in expansion joints.

Code Description Unit Quantity Rate Rs. Amount Rs.


0317 Details of cost for 18mm thick 15cm deep and 300m in length sqm tonne 45.00 360.00 16200.00
2211 MATERIAL day day 0.21 163.93 34.43
0124 Premoulded joint filler 12 mm thick L.S. 1.00 714.00 714.00
0114 = 300x0.15 = 45 sqm. 3.00 645.00 1935.00
9999 Carriage of Tar bitumen 45x0.018 =0.81cum. 26.91 2.12 57.05
Weight 256.3kg. per cum. = 256.3x0.81 18940.47
= 207.6kg. say 0.21 tonne Labour for fixing etc. : 189.40
Mason (brick layer) 2nd class Beldar 19129.88
Sundries TOTAL 2687.75
Add 1 % Water charges on "W" TOTAL 21817.63
Add GST on "X" (multiplying factor 0.1405) TOTAL 3272.64
Add 15% CPOH on "Y" TOTAL 25090.27
Add Cess @ 1% on "Z" 250.90
Cost for 300m length, 18mm width and 15cm depth Cost for one cm. 25341.17
depth one cm. width per metre length. Say 3.13
3.15

16.46 Providing and laying in position bitumen hot sealing compound for expansion joints etc.
16.46.1 Using grade 'A' sealing compound.

Code Description Unit Quantity Rate Rs. Amount Rs.


0314 Details of cost for 20mm wide 20mm deep and 300 metres in length. kilogram 30.76 29.00 892.04
2211 Sealing compound- 300x0.02x0.02 = 0.12cum. tonne 0.03 163.93 4.92
0124 Weight 256.3kg. per cum. = 256.3x0.12 = 30.76 kg MATERIAL day day L.S. 1.00 714.00 714.00
0114 Bitumen hot sealing compound : grade A Carriage of Tar bitumen 2.50 645.00 1612.50
9999 30.76 = 0.3076 Say 0.03 tonne Labour for filling : 20.67 2.12 43.82
Mason (brick layer) 2nd class Beldar 3267.28
Sundries TOTAL 32.67
Add 1 % Water charges on "W" TOTAL 3299.95
Add GST on "X" (multiplying factor 0.1405) TOTAL 463.64
Add 15% CPOH on "Y" TOTAL 3763.59
Add Cess @ 1% on "Z" 564.54
Cost for 20mm depth, 20mm width and 300m length Cost for one cm. 4328.13
depth one cm. width permetre length. Say 43.28
4371.41
3.64
3.65

16.47 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior
approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out com
16.47.1 New work (Two or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


7256 Details of cost for 10sqm. MATERIAL litre L.S. 2.79 130.00 362.70
9977 1st Coat - 1.66 + 2nd Coat -1.13 day day L.S. 5.07 2.12 10.75
0131 Total = 2.79 0.54 714.00 385.56
0114 Superior quality road marking paint (water based) Carriage of paint 0.54 645.00 348.30
9999 LABOUR 36.40 2.12 77.17
Painter Beldar Sundries 1184.48
(including painting brush, wire brush, labour for controlling traffic and 11.84
other T&P etc.) 1196.32
TOTAL 168.08
Add 1 % Water charges on "W" TOTAL 1364.40
Add GST on "X" (multiplying factor 0.1405) TOTAL 204.66
Add 15% CPOH on "Y" TOTAL 1569.06
Add Cess @ 1% on "Z" Cost for 10 sqm. 15.69
Cost per sqm. 1584.76
Say 158.48
158.50

16.47.2 Old work (One or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


7256 Details of cost for 10sqm. MATERIAL litre L.S. 1.66 130.00 215.80
9977 Superior quality road marking paint (water based) Carriage of paint day day L.S. 1.12 2.12 2.37
0131 LABOUR 0.36 714.00 257.04
0114 Painter Beldar Sundries 0.36 645.00 232.20
9999 (including painting brush, wire brush, labour for controlling traffic and 24.44 2.12 51.81
other T&P etc.) 759.23
TOTAL 7.59
Add 1 % Water charges on "W" TOTAL 766.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 107.74
Add 15% CPOH on "Y" TOTAL 874.56
Add Cess @ 1% on "Z" Cost for 10 sqm. 131.18
Cost per sqm. 1005.74
Say 10.06
1015.80
101.58
101.60

16.48 Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conformi
164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. com
16.48.1 New work (Two or more coats)

Code Description Unit Quantity Rate Rs. Amount Rs.


7255 Details of cost for 10sqm. MATERIAL litre L.S. 1.48 115.00 170.20
9977 Road marking paint (spirit based) (confirming to IS 164 spirit base) day 2.65 2.12 5.62
0128 Carriage of paint (1.48/0.8x0.08x6.9) LABOUR day day 0.10 714.00 71.40
0131 Mate 0.54 714.00 385.56
0114 Painter Beldar 1.68 645.00 1083.60
9999 for stretching of rope & errecting of barricading Sundries L.S. 36.40 2.12 77.17
(including painting brush, wire brush, labour for controlling traffic and 1793.55
other T&P etc.) 17.94
TOTAL 1811.48
Add 1 % Water charges on "W" TOTAL 254.51
Add GST on "X" (multiplying factor 0.1405) TOTAL 2065.99
Add 15% CPOH on "Y" TOTAL 309.90
Add Cess @ 1% on "Z" Cost for 10 sqm. 2375.89
Cost per sqm. 23.76
Say 2399.65
239.97
239.95

16.48.2 Old work (One or more coats)


Code Description Unit Quantity Rate Rs. Amount Rs.
7255 Details of cost for 10sqm. MATERIAL litre L.S. 0.89 115.00 102.35
9977 Road marking paint (spirit based) (confirming to IS 164 spirit base) day day day 0.65 2.12 1.38
0128 Carriage of paint. L.S. 0.06 714.00 42.84
0131 LABOUR 0.36 714.00 257.04
0114 Mate Painter Beldar 1.12 645.00 722.40
9999 (stretching of rope & errecting of barricading etc.) 24.44 2.12 51.81
Sundries 1177.82
(including painting brush, wire brush, labour for controlling traffic and 11.78
other T&P etc.) 1189.60
TOTAL 167.14
Add 1 % Water charges on "W" TOTAL 1356.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 203.51
Add 15% CPOH on "Y" TOTAL 1560.25
Add Cess @ 1% on "Z" Cost for 10 sqm. 15.60
Cost per sqm. 1575.85
Say 157.59
157.60

16.49 Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concr
cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing p
R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab
mouth including centring, shuttering & neat cement punning inside the bell
mouth etc. all complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 Nos.
(i) Earth work in excavation
Channel :- 10x1x1.00x0.20x0.15 = 0.30+
Bell mouth :-10x1x1.00x0.50x(0.18+0.075)/2 = 0.64
Total = 0.94 MATERIAL
(Rate as per item no. 2.8.1 of SH: Earth work)
(ii) Cement concrete 1:4:8
Channel :-10x1x1.00x0.20x0.075 = 0.15 cum. Rate as per item no 4.1.8
of SH : Concrete Work
2.8.1 (iii) Cement concrete 1:3:6 Channel 10x1x1.00x0.20x0.75 = 0.15 + Bed cum 0.94 286.85 269.64
4.1.8 of bell mouth : cum 0.15 6326.05 948.91
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion 10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :-
10x2x0.35x0.25x0.375 = 0.65 +
4.1.5 Quadrant portion :- cum 1.95 6833.40 13325.13
5.3 10x1[(0.30x0.30)-3.142/4(0.30)²]x0.30 =0.06+ cum 0.25 10719.30 2679.83
5.22.1 Central middle part :- 10x1x0.30x0.25x0.075 = 0.05 kg 25.00 88.95 2223.75
5.9.1 Total = 1.95 cum. sqm 13.17 307.95 4055.70
5.23 (Rate as per item no.4.1.5 S.H. : Cement Concrete) sqm 6.50 253.05 1644.83
13.18 (iv) RCC in shelves 10x1x1.00x0.50x0.05 = 0.25cum. sqm tonne 4.81 67.80 326.12
0367 Rate as per item no. 5.3 SH : Reinforced cement concrete work tonne cum 0.024 5000.00 120.00
2209 (v) Reinforcement for RCC @100kg/cum. 0.25x100=25kg. cum 0.024 145.72 3.50
0983 Rate as per item no. 5.22.1 SH : Reinforced cement concrete work day day L.S. 0.05 900.00 45.00
2261 (vi) Centering and shuttering For shelves (sides) 10x2(1.00+0.50)x0.05 = L.S. 0.05 163.93 8.20
0114 1.50+ Front side of bell mouth : 10x2(0.446)x0.375 = 3.34 + Pipe portion: day day day 0.035 645.00 22.58
0101 10x[0.30x0.375-3.142/4(030)²] = 0.04 + L.S. 0.003 714.00 2.14
9999 Out side of bell mouth L.S. 1.27 2.12 2.69
9999 Total= 10x(1.00 =0.50)x0.45 = 9.00+ 1.27 2.12 2.69
0155 Deduct pipe opening 0.33 749.00 247.17
0115 Total =10x0.785x0.30x0.30 = (-)0.71 0.488 645.00 314.76
0101 Total = 13.17 0.60 714.00 428.40
9999 Rate as per item No.5.9.1 of SH : RCC 8.71 2.12 18.47
9999 (vii) cement plaster on RCC slab 10x1.00x0.50 = 5.00 + 7.62 2.12 16.15
10x2(1.00+0.50)x0.05 = 1.50+ Total = 6.50 sqm. 26705.64
Rate as per item no.13.16.1 12.32
(viii) Neat cement punning: 26717.96
Qty. same as marked (x) at (9vi) = Total =3.34+0.04 = 3.38 sqm. 174.79
Channel portion: 10x1x(0.85+0.30)/2x0.25 = 1.43 26892.75
Total = 4.81 212.83
Rate as per item no.13.18 S.H. Finishing Portland Cement (OPC-43 27105.58
grade) Carriage of Cement 16.32
Fine sand (zone IV) 27121.89
Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) 2712.19
LABOUR 2712.20
Beldar Bhisti
Hire charges of mixer Sundries
Labour for plaster Mason (average) Coolie
Bhisti
Extra for removing burr Scaffolding
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 10 nos.
Cost for one bell mouth
Say
16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA
(Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion res
coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slo
reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. T
luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 :
studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7426 Details of cost for 15 Nos. MATERIAL each L.S. 15.00 80.00 1200.00
9977 Cat's eye day day 2.60 2.12 5.51
0124 Carriage of cats eyes LABOUR L.S. 0.50 714.00 357.00
0114 Mason (brick layer) 2nd class Beldar 0.50 645.00 322.50
9999 Sundries 39.00 2.12 82.68
(including material required for fixing cats eyes and providing barricading 1967.69
to divert 19.68
traffic) TOTAL 1987.37
Add 1 % Water charges on "W" TOTAL 279.23
Add GST on "X" (multiplying factor 0.1405) TOTAL 2266.59
Add 15% CPOH on "Y" TOTAL 339.99
Add Cess @ 1% on "Z" Cost for 15 Nos. 2606.58
Cost for one cat's eye. 26.07
Say 2632.65
175.51
175.50

16.51 Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash stabilised soil with a mix of 3% lime, 12% fly
85% local suitable soil by weight, so as to achieve minimum field C.B.R. of 20, including mixing, rolling with road roller curing etc. all comp
16.51.1 Minimum thickness 15 cm

Code Description Unit Quantity Rate Rs. Amount Rs.


0777 Details of cost for 6.67 sqm. or 1 cum. MATERIAL quintal 0.41 290.00 118.90
2208 Dry hydrated lime (factory made) Carriage of Lime cum cum 0.068 163.93 11.15
1980 Flyash cum 0.277 11.00 3.05
2267 Carriage of Stone dust LABOUR day day 0.277 163.93 45.41
0114 (i)For earth work : cum cum 0.116 645.00 74.82
0115 Beldar Coolie day day 0.116 645.00 74.82
0979 Royalty for good earth Carriage of Good earth day day 0.655 40.00 26.20
2241 (ii) For mixing : L.S. 0.655 204.92 134.22
0114 Beldar Coolie day day 0.025 645.00 16.13
0115 (iii) For rolling layers : day 0.025 645.00 16.13
0113 Chowkidar 0.0008 645.00 0.52
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne Sundries 0.0008 3000.00 2.40
9999 (iv) Labour for spreading and watering : Beldar 0.18 2.12 0.38
0114 Coolie Bhisti TOTAL 0.26 645.00 167.70
0115 Add 1 % Water charges on "W" TOTAL 0.26 645.00 167.70
0101 Add GST on "X" (multiplying factor 0.1405) 0.18 714.00 128.52
TOTAL 988.03
9.88
997.91
140.21
1138.12

Add 15% CPOH on "Y" TOTAL 170.72


Add Cess @ 1% on "Z" Cost for 1 cum. 1308.84
Say 13.09
1321.93
1321.95

16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash : 3 coarse sand : 6 graded stone aggregate 20
nominal size), including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths, including preparation of sub
a hand rammer, laying 10
mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand.

Code Description Unit Quantity Rate Rs. Amount Rs.


16.52Y Details of cost for a path of area 10sqm/0.9cum. No. of blocks required for cum 0.875 3727.10 3261.21
0114 10sqm. = 108 nos. day day 0.72 645.00 464.40
0115 (a) Concrete in blocks (108x0.30x0.30x0.09 = 0.875 cum.) cum cum 0.60 645.00 387.00
6501 Rate as per sub analysis Item Number 16.52Y of SH:Road Work day day day 0.10 1300.00 130.00
2335 (b) Labour for surface excavation : cum day day 0.10 163.93 16.39
0114 Beldar Coolie day L.S. 0.0089 645.00 5.74
0115 (c) For levelling course of fine sand Sand zone V (Jamuna) cum cum day 0.0107 645.00 6.90
0101 Carriage of Jamuna sand LABOUR day day 0.0035 714.00 2.50
3.8 Beldar Coolie Bhisti 0.0972 5024.15 488.35
0155 (d) For finishing with 10mm thick cement plaster 0.787 749.00 589.46
0115 cement plaster with cement mortar 1:3(1 Cement: 3 Coarse sand) 0.787 645.00 507.62
0101 qty. for 9.72sqm. = 0.0972 cum 0.262 714.00 187.07
9999 Rate as per Item Number 3.8 of SH: Mortars Mason (average) 12.22 2.12 25.91
6501 Coolie Bhisti 0.005 1300.00 6.50
2335 Scaffolding and sundries 0.005 163.93 0.82
0123 (e) For laying blocks and filling joints with Jamuna sand for filling joints 0.90 784.00 705.60
0115 5mm (av.) thick 1.98 645.00 1277.10
0101 Sand zone V (Jamuna) Carriage of Jamuna sand Mason (brick layer) 1st 0.05 714.00 35.70
class Coolie 8098.27
Bhisti TOTAL 80.98
Add 1 % Water charges on "W" TOTAL 8179.25
Add GST on "X" (multiplying factor 0.1405) TOTAL 1149.18
Add 15% CPOH on "Y" TOTAL 9328.43
Add Cess @ 1% on "Z" Cost for 10sqm. or 0.9cum. Rate per cum. 1399.26
Say 10727.70
107.28
10834.97
12038.86
12038.85

16.52X Sub Analysis X for sub analysis item Number 16.52Y


Code Description Unit Quantity Rate Rs. Amount Rs.
Sub Analysis 16.52X for use in sub analysis of 16.52Y Details of cost for
1cum of lime Flyash mortar 1:2:3 (lime:2 flyash:3 coarse sand).
MATERIAL
0773 Unslaked lime Flyash 1.52 300.00 456.00
1980 Coarse sand (zone III) Carriage of Lime Carriage of Surkhi Carriage of quintal 0.48 11.00 5.28
0982 Coarse sand cum cum 0.72 1500.00 1080.00
2208 LABOUR cum cum 0.24 163.93 39.34
2266 cum 0.48 163.93 78.69
2203 0.72 163.93 118.03

0114 Labour for slaking the lime making, lime putty, grinding, measuring, day day L.S. 0.90 645.00 580.50
0101 carrying, depositing and mixing. L.S. 0.45 714.00 321.30
9999 Beldar Bhisti 26.91 2.12 57.05
9999 Running and upkeep of mortar mill Sundries 13.52 2.12 28.66
TOTAL 2764.85
Cost of 1.00 cum Say 2764.85
2764.85

16.52Y Sub Analysis Y for Item Number 16.52

Code Description Unit Quantity Rate Rs. Amount Rs.


16.52X Sub Analysis 'Y' (16.52Y) for use in Item No. 16.52 Details of cost for 1 cum cum cum 0.40 2764.85 1105.94
0295 cum. of cement concrete MATERIAL cum 0.64 1400.00 896.00
0297 Lime Flyash mortar day day day 0.21 1350.00 283.50
2202 Rate as per sub analysis of Item No 16.52X day day day 0.85 163.93 139.34
0114 Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate L.S. 0.65 645.00 419.25
0115 (Single size) : 10 mm nominal size Carriage of Stone aggregate below 40 L.S. 0.60 645.00 387.00
0101 mm nominal size LABOUR L.S. 0.27 714.00 192.78
0123 Beldar Coolie Bhisti 0.05 784.00 39.20
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate 0.05 714.00 35.70
0128 Hire and running charges of mixer Sundries 0.04 714.00 28.56
9999 Hire charges of steel moulds, table vibrators, rammers, bolts, nuts and 26.91 2.12 57.05
9999 washers etc. 13.52 2.12 28.66
9999 TOTAL 53.82 2.12 114.10
Cost of 1.00 cum Say 3727.08
3727.08
3727.10

16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total leng
having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9
R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or
G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced
barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 g
(cost of M.S. angle, C.C. blocks shall be paid separately)

Code Description Unit Quantity Rate Rs. Amount Rs.


8691 Details of cost for 30.00 m length MATERIAL bundle 5.00 600.00 3000.00
8692 Punched tape concertina coil 600 mm dia 10 m openable length (Total metre 270.00 7.00 1890.00
8693 length 90 m) each set L.S. 10.00 42.00 420.00
9999 (Having 50 Nos. of rounds per 6 meter = 1 bundles) Therefore, Nos. of day 49.40 2.12 104.73
0114 bundles 30/10=3bundles) day day 1.00 645.00 645.00
0102 RBT reinforced barbed wire 9 rounds = 9x30 = 270m 0.50 784.00 392.00
0103 Turn buckle and strengthening bolt 0.50 714.00 357.00
G.I. staples clips etc. LABOUR 6808.73
Labour for fixing straightening cutting of tape/ coils & wire Beldar 68.09
0.50x2 = 1.00 Nos (Taken double due to height) Blacksmith 1st class 6876.82
Blacksmith 2nd class TOTAL 966.19
Add 1 % Water charges on "W" TOTAL 7843.01
Add GST on "X" (multiplying factor 0.1405) TOTAL 1176.45
Add 15% CPOH on "Y" TOTAL 9019.46
Add Cess @ 1% on "Z" 90.19
cost for 30.00 metre 9109.65

cost per metre 303.66


Say 303.65
16.54 Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with
binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required g
and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and d
complete as per specificatons and directions of Engineer-in-Charge.
16.54.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime fil
(percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant
of 100-120 TPH capacity.
Code Description Unit Quantity Rate Rs. Amount Rs.
7309 Details of cost for 195 cum (or 450 M.T. ) MATERIAL tonne tonne 22.50 38150.00 858375.00
2211 Paving Asphalt VG-30 of approved quality (percentage by weight of total cum cum cum 22.50 163.93 3688.43
0294 mix) cum cum cum 42.75 1350.00 57712.50
0297 Carriage of Tar bitumen Aggregate quintal cum 42.75 1350.00 57712.50
0297 Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes hour hour hour 39.90 1350.00 53865.00
0298 Weight of aggregate = 450 -22.50 = 427.50 tonnes Taking density of hour hour 39.90 1400.00 55860.00
2903 aggregate = 1.5 tonne/cum Volume of aggregate =427.50/1.5 =285cum tonne/km 114.00 1400.00 159600.00
2202 Grading - II/19 mm (Nominal Size) hour hour hour 279.30 163.93 45785.65
0777 25 - 10mm size = 30% of 285 = 85.5 cum day day 85.50 290.00 24795.00
2208 10 - 5mm size = 28% of 285 = 79.8 cum 5mm and below = 40% of 285 = day 6.63 163.93 1086.86
0062 114 cum 3.00 15000.00 45000.00
0063 Stone Aggregate (Single size) : 25 mm nominal size Qty = 85.5 * 50 /100 3.00 13000.00 39000.00
0064 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.5 * 50 /100 6.00 1500.00 9000.00
0069 Stone Aggregate (Single size) : 10 mm nominal size Qty = 79.8 * 50 /100 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 06 mm nominal size Qty = 79.8 * 50 /100 6.00 1300.00 7800.00
0053 Stone chippings/ screenings 4.75 mm nominal size Qty = 285 * 40 /100 4500.00 3.30 14850.00
0055 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% 3.90 300.00 1485.00
0054 ( percentage by weight of aggregate) Dry hydrated lime (factory made) 3.90 600.00 1170.00
0056 Carriage of Lime 3.90 1200.00 2340.00
0128 (consitering density of lime as 1.29 T per cum) V =8.55/1.29 = 0.84 714.00 4680.00
0114 6.63 cum 14.00 645.00 599.76
0139 MACHINERY/ HIRE CHARGES: 5.00 714.00 9030.00
Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity 3570.00
Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 1459405.69
KVA
Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum
Add 10 per cent of cost of carriage to cover cost of loading and unloading
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling.
(6*0.65)
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem
Road Roller
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65)
LABOUR
Mate Beldar
working with HMP, mechanical broom, paver, roller, asphalt cutter and
assistance for setting out lines, levels and layout of construction
Skilled Beldar (for floor rubbing etc.) for checking line & levels
TOTAL

Add 1 % Water charges on "W" TOTAL 14594.06


Add GST on "X" (multiplying factor 0.1405) TOTAL 1473999.75
Add 15% CPOH on "Y" TOTAL 207096.96
Add Cess @ 1% on "Z" Cost for 195 cum(450 M.T.) Cost per cum. 1681096.71
Say 252164.51
1933261.22
19332.61
1952593.83
10013.30
10013.30
16.54.2 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime fil
(percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 195 cum (or 450 M.T. ) MATERIAL tonne tonne 22.50 38150.00 858375.00
2211 Paving Asphalt VG-30 of approved quality (percentage by weight of total cum cum cum 22.50 163.93 3688.43
0294 mix) Carriage of Tar bitumen cum cum cum 42.75 1350.00 57712.50
0297 Aggregate quintal cum 42.75 1350.00 57712.50
0297 Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes hour hour hour 39.90 1350.00 53865.00
0298 Weight of aggregate = 450 -22.50 = 427.50 tonnes Taking density of hour 39.90 1400.00 55860.00
2903 aggregate = 1.5 tonne/cum Volume of aggregate =427.50/1.5 =285cum tonne/km 114.00 1400.00 159600.00
2202 Grading - II/19 mm (Nominal Size) hour hour hour 279.30 163.93 45785.65
0777 25 - 10mm size = 30% of 285 = 85.5 cum day day 85.50 290.00 24795.00
2208 10 - 5mm size = 28% of 285 = 79.8 cum 5mm and below = 40% of 285 = 6.63 163.93 1086.86
0076 114 cum 6.00 12000.00 72000.00
0064 Stone Aggregate (Single size) : 25 mm nominal size Qty = 85.5 * 50 /100 6.00 1500.00 9000.00
0069 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.5 * 50 /100 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 10 mm nominal size Qty = 79.8 * 50 /100 6.00 1300.00 7800.00
0053 Stone Aggregate (Single size) : 06 mm nominal size Qty = 79.8 * 50 /100 4500.00 3.30 14850.00
0055 Stone chippings/ screenings 4.75 mmnominal size Qty = 285 * 40 /100 3.90 300.00 1485.00
0054 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% 3.90 600.00 1170.00
0056 ( percentage by weight of aggregate) Dry hydrated lime (factory made) 3.90 1200.00 2340.00
0128 Carriage of Lime 0.84 714.00 4680.00
0114 (consitering density of lime as 1.29 T per cum) V =8.55/1.29 = 14.00 645.00 599.76
6.63 cum 9030.00
MACHINERY/ HIRE CHARGES:
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual
output
Paver finisher Hydrostatic with sensor control 100 TPH Generator 250
KVA
Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne
capacity (Taken 10km avarage lead) 450x10=4500 tonne km
Tipper -5 Cum
Add 10 per cent of cost of carriage to cover cost of loading and unloading
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling.
(6*0.65)
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem
Road Roller
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65)
LABOUR
Mate Beldar
working with HMP, mechanical broom, paver, roller, asphalt
cutter and assistancefor setting out lines, levels and layout of construction
0139 Skilled Beldar (for floor rubbing etc.) for checking line & levels day 5.00 714.00 3570.00
TOTAL 1447405.69
Add 1 % Water charges on "W" TOTAL 14474.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 1461879.75
Add 15% CPOH on "Y" TOTAL 205394.10
Add Cess @ 1% on "Z" Cost for 195 cum(450 M.T.) Cost per cum. 1667273.85
Say 250091.08
1917364.93
19173.65
1936538.58
9930.97
9930.95

16.55 Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous bin
transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required gra
and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and d
complete as per specificatons and directions of Engineer-in-Charge.
16.55.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepare
Type Hot Mix Plant of 100-120 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 205 cum (or 450 M.T. ) MATERIAL tonne tonne 15.75 38150.00 600862.50
2211 Paving Asphalt VG-30 of approved quality 3.5% of 450 MT = 15.75 MT cum cum cum 15.75 163.93 2581.90
0294 Carriage of Tar bitumen cum cum cum 57.90 1350.00 78165.00
0297 Weight of mix = 205 * 2.5 = 450 tonnes Aggregate hour hour hour 57.90 1350.00 78165.00
0297 Total weight of mix = 450 tonnes Weight of bitumen = 15.75 tonnes hour hour 57.90 1350.00 78165.00
0298 Weight of aggregate = 450 -15.75 = 434.25 tonnes tonne/km 57.90 1400.00 81060.00
2903 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate hour hour hour 57.90 1400.00 81060.00
2202 =434.25/1.5 =289.50cum Grading - II/19 mm (Nominal Size) 289.50 163.93 47457.74
0062 25 - 10mm size = 40% of 289.50 = 115.8 cum 3.00 15000.00 45000.00
0063 10 - 5mm size = 40% of 289.50 = 115.8 cum 5mm and below = 20% of 3.00 13000.00 39000.00
0064 289.50 = 57.9 cum 6.00 1500.00 9000.00
0069 Stone Aggregate (Single size) : 25 mm nominal size Qty = 115.8 * 50 /100 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.8 * 50 /100 6.00 1300.00 7800.00
0053 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.8 * 50 /100 4500.00 3.30 14850.00
0055 Stone Aggregate (Single size) : 06 mm nominal size Qty = 115.8 * 50 /100 3.90 300.00 1485.00
0054 Stone chippings/ screenings 4.75 mm nominal size Qty = 289.50 * 20 3.90 600.00 1170.00
0056 /100 3.90 1200.00 2340.00
Carriage of Stone aggregate below 40 mm nominal size MACHINERY 4680.00
Hot mix Plant -120 TPH capacity @75tonne per hour actual output Hot
mix Plant 100 TPH Capacity @75tonne per hour actual output
Paver finisher Hydrostatic with sensor control 100 TPH @75tonne per
hour actual output
Generator 250 KVA
Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne
capacity (Taken 10km avarage lead) 450x10=4500 tonne km
Tipper -5 Cum
Add 10 per cent of cost of carriage to cover cost of loading and unloading
X * 10 / 100 = 13500.00 * 10 / 100
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling.
(6*0.65)
Vibratory roller 8 to 10 tonne
for intermediate rolling.(6*0.65) Tandem Road Roller
0128 Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) day day 0.84 714.00 599.76
0114 LABOUR day 14.00 645.00 9030.00
0139 Mate Beldar 5.00 714.00 3570.00
working with HMP, mechanical broom, paver, roller, asphalt cutter and 1188441.89
assistance for setting out lines, levels and layout of construction 11884.42
Skilled Beldar (for floor rubbing etc.) for checking line & levels 1200326.31
TOTAL 168645.85
Add 1 % Water charges on "W" TOTAL 1368972.16
Add GST on "X" (multiplying factor 0.1405) TOTAL 205345.82
Add 15% CPOH on "Y" TOTAL 1574317.98
Add Cess @ 1% on "Z" Cost for 205 cum(450 M.T.) Cost per cum. 15743.18
Say 1590061.16
7756.40
7756.40

16.55.2 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepare
Type Hot Mix Plant of 60-90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 205 cum (or 450 M.T. ) MATERIAL tonne tonne 15.75 38150.00 600862.50
2211 Paving Asphalt VG-30 of approved quality 3.5% of 450 MT = 15.75 MT cum cum cum 15.75 163.93 2581.90
0294 Carriage of Tar bitumen cum cum cum 57.90 1350.00 78165.00
0297 Weight of mix = 205 * 2.5 = 450 tonnes Aggregate hour hour hour 57.90 1350.00 78165.00
0297 Total weight of mix = 450 tonnes Weight of bitumen = 15.75 tonnes hour 57.90 1350.00 78165.00
0298 Weight of aggregate = 450 -15.75 = 434.25 tonnes tonne km 57.90 1400.00 81060.00
2903 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate hour hour 57.90 1400.00 81060.00
2202 =434.25/1.5 =289.50cum Grading - II/19 mm (Nominal Size) 289.50 163.93 47457.74
0076 25 - 10mm size = 40% of 289.50 = 115.8 cum 6.00 12000.00 72000.00
0064 10 - 5mm size = 40% of 289.50 = 115.8 cum 5mm and below = 20% of 6.00 1500.00 9000.00
0069 289.50 = 57.9 cum 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 25 mm nominal size Qty = 115.8 * 50 /100 6.00 1300.00 7800.00
0053 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.8 * 50 /100 4500.00 3.30 14850.00
0055 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.8 * 50 /100 3.90 300.00 1485.00
0054 Stone Aggregate (Single size) : 06 mm nominal size Qty = 115.8 * 50 /100 3.90 600.00 1170.00
Stone chippings/ screenings 4.75 mm nominal size Qty = 289.50 * 20 2340.00
/100
Carriage of Stone aggregate below 40 mm nominal size MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual
output
@75tonne per hour actual output
Paver finisher Hydrostatic with sensor control 100 TPH @75tonne per
hour actual output
Generator 250 KVA
Front end loader 1 cum bucket capacity (incl POL)
Topper 10 tonne capacity (Taken 10km avarage lead) 450x10=4500
tonne km
Tipper -5 Cum
Add 10 per cent of cost of carriage to cover cost of loading and unloading
Smooth Wheeled Roller 8 to 10 tonne
for initial break down rolling.(6*0.65) Vibratory roller 8 to 10 tonne

0056 for intermediate rolling.(6*0.65) Tandem Road Roller hour 3.90 1200.00 4680.00
0128 Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) day day 0.84 714.00 599.76
0114 LABOUR day 14.00 645.00 9030.00
0139 Mate Beldar 5.00 714.00 3570.00
working with HMP, mechanical broom, paver, roller, asphalt cutter and 1176441.89
assistance for setting out lines, levels and layout of construction 11764.42
Skilled Beldar (for floor rubbing etc.) for checking line & levels 1188206.31
TOTAL 166942.99
Add 1 % Water charges on "W" TOTAL 1355149.30
Add GST on "X" (multiplying factor 0.1405) TOTAL 203272.39
Add 15% CPOH on "Y" TOTAL 1558421.69
Add Cess @ 1% on "Z" Cost for 205 cum(450 M.T.) Cost per cum. 15584.22
Say 1574005.91
7678.08
7678.10
7678.10

16.56 Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bit
binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required g
and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specific
complete and as per directions of Engineer-in-Charge.
16.56.1 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (perce
weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 195 cum (450 tonnes) tonne tonne 22.50 38150.00 858375.00
2211 Area covered for 25 mm thickness=7800 sqm MATERIAL cum cum 22.50 163.93 3688.43
0296 Paving Asphalt VG-30 of approved quality 5% of 450 MT = 22.50 MT cum 81.225 1350.00 109653.75
0297 Carriage of Tar bitumen Aggregate cum 81.225 1350.00 109653.75
2903 Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes quintal cum 116.85 1400.00 163590.00
2202 Weight of aggregate = 450 -22.50 = hour hour 279.30 163.93 45785.65
0777 427.50 tonnes 85.50 290.00 24795.00
2208 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate 6.63 163.93 1086.86
0062 =427.50/1.5 =285cum Grading - II/19 mm (Nominal Size) 3.00 15000.00 45000.00
0063 9.5 - 4.75 mm size = 57% of 285 = 162.45 cum 4.75mm and below = 41% 3.00 13000.00 39000.00
of 285 = 116.85 cum Stone Aggregate (Single size) : 12.5 mm nominal
size Qty = 162.45 * 50 /100
Stone Aggregate (Single size) : 10 mm nominal size Qty = 162.45 * 50
/100
Stone chippings/ screenings 4.75 mm nominal size nominal size
Qty = 285 * 41 /100
Carriage of Stone aggregate below 40 mm nominal size nominal size
Lime Filler @ 2% ( percentage by weight of aggregate) Dry hydrated lime
(factory made)
Carriage of Lime
(consitering density of lime as 1.29 T per cum) V =8.55/1.29 =
6.63 cum
MACHINERY/ HIRE CHARGES:
Hot mix Plant -120 TPH capacity @75tonne per hour actual output Hot
mix Plant 100 TPH Capacity @75tonne per hour actual output
0064 Paver finisher Hydrostatic with sensor control 100 TPH @75tonne per hour 6.00 1500.00 9000.00
0069 hour actual output hour hour 6.00 400.00 2400.00
0052 Generator 250 KVA tonne km 6.00 1300.00 7800.00
0053 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne hour hour hour 4500.00 3.30 14850.00
0055 capacity (Taken 10km avarage lead) 450x10=4500 tonne km day day 3.90 300.00 1485.00
0054 Tipper -5 Cum 3.90 600.00 1170.00
0056 Add 10 per cent of cost of carriage to cover cost of loading and unloading 3.90 1200.00 2340.00
0128 Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 0.84 714.00 4680.00
0114 (6*0.65) 14.00 645.00 599.76
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 9030.00
Road Roller 1453983.19
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 14539.83
LABOUR 1468523.02
Mate Beldar 206327.48
working with HMP, mechanical broom, paver, roller, asphalt cutter and 1674850.51
assistance for setting out lines, levels and layout of construction for 251227.58
checking line & levels 1926078.08
TOTAL 19260.78
Add 1 % Water charges on "W" TOTAL 1945338.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 249.40
Add 15% CPOH on "Y" TOTAL 249.40
Add Cess @ 1% on "Z" Cost for 7800 Sqm Cost per sqm
Say

16.56.2 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (perce
weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 195 cum (450 tonnes) tonne tonne 22.50 38150.00 858375.00
2211 Area covered for 25 mm thickness=7800 sqm MATERIAL cum cum cum 22.50 163.93 3688.43
0296 Paving Asphalt VG-30 of approved quality 5% of 450 MT = 22.50 MT cum 81.225 1350.00 109653.75
0297 Carriage of Tar bitumen Aggregate quintal cum 81.225 1350.00 109653.75
2903 Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes hour hour 116.85 1400.00 163590.00
2202 Weight of aggregate = 450 -22.50 = 279.30 163.93 45785.65
0777 427.50 tonnes 85.5 290.00 24795.00
2208 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate 6.63 163.93 1086.86
0076 =427.50/1.5 =285cum Grading - II/19 mm (Nominal Size) 6.00 12000.00 72000.00
0064 9.5 - 4.75 mm size = 57% of 285 = 162.45 cum 4.75mm and below = 41% 6.00 1500.00 9000.00
of 285 = 116.85 cum Stone Aggregate (Single size) : 12.5 mm nominal
size Qty = 162.45 * 50 /100
Stone Aggregate (Single size) : 10 mm nominal size Qty = 162.45 * 50
/100
Stone chippings/ screenings 4.75 mm nominal size Qty = 285 * 41 /100
Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2%
( percentage by weight of aggregate) Dry hydrated lime (factory made)
Carriage of Lime
(consitering density of lime as 1.29 T per cum) V =8.55/1.29 =
6.63 cum
MACHINERY/ HIRE CHARGES:
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual
output
Paver finisher Hydrostatic with sensor control 100 TPH

0069 Generator 250 KVA hour hour 6.00 400.00 2400.00


0052 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne tonne km 6.00 1300.00 7800.00
0053 capacity (Taken 10km avarage lead) 450x10=4500 tonne km hour hour hour 4500.00 3.30 14850.00
0055 Tipper -5 Cum day day 3.90 300.00 1485.00
0054 Add 10 per cent of cost of carriage to cover cost of loading and unloading 3.90 600.00 1170.00
0056 Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 3.90 1200.00 2340.00
0128 (6*0.65) 0.84 714.00 4680.00
0114 Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 14.00 645.00 599.76
Road Roller 9030.00
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 1441983.19
LABOUR 14419.83
Mate Beldar 1456403.02
working with HMP, mechanical broom, paver, roller, asphalt cutter and 204624.62
assistance for setting out lines, levels and layout of construction for 1661027.65
checking line & levels 249154.15
TOTAL 1910181.79
Add 1 % Water charges on "W" TOTAL 19101.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 1929283.61
Add 15% CPOH on "Y" TOTAL 247.34
Add Cess @ 1% on "Z" Cost for 7800 Sqm Cost per sqm 247.35
Say
16.57 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous bin
filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level a
alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specificatio
and as per directions of Engineer-in-Charge.
16.57.1 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (p
by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 191 cum (450 tonnes) MATERIAL tonne 24.75 38150.00 944212.50
2211 Paving Asphalt VG-30 of approved quality @5.50% (percentage by tonne 24.75 163.93 4057.27
0296 weight of total mix Carriage of Tar bitumen cum cum 42.525 1350.00 57408.75
0297 Aggregate cum cum 42.525 1350.00 57408.75
0297 Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes cum cum 35.44 1350.00 47844.00
0298 Weight of aggregate = 450 -24.75 = 35.44 1400.00 49616.00
2903 425.25 tonnes 119.07 1400.00 166698.00
2202 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate 275.00 163.93 45080.75
=425.25/1.5 =283.50cum Grading - II/19 mm (Nominal Size)
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of
283.50 = 119.07 cum
Stone Aggregate (Single size) : 12.5 mm nominal size Qty = 85.05 * 50
/100
Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.05 * 50 /100
Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100
Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100
Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100
Carriage of Stone aggregate below 40 mm nominal size
Lime Filler @ 2% ( percentage by weight of aggregate)
0777 Dry hydrated lime (factory made) quintal cum 127.60 290.00 37004.00
2208 Carriage of Lime hour hour hour 9.89 163.93 1621.27
0062 (consitering density of lime as 1.29 T per cum) V = 12.758/1.29 hour hour 3.00 15000.00 45000.00
0063 = 9.89 cum tonne km 3.00 13000.00 39000.00
0064 MACHINERY/ HIRE CHARGES: hour hour hour 6.00 1500.00 9000.00
0069 Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity day day 6.00 400.00 2400.00
0052 Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 day 6.00 1300.00 7800.00
0053 KVA 4500.00 3.30 14850.00
0055 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne 3.90 300.00 1485.00
0054 capacity (Taken 10km avarage lead) 450x10=4500 tonne km 3.90 600.00 1170.00
0056 Topper 10 tonne capacity (Taken 10km avarage lead) 450x10=4500 3.90 1200.00 2340.00
0128 tonne km 0.84 714.00 4680.00
0114 Tipper -5 Cum 14.00 645.00 599.76
0139 Add 10 per cent of cost of carriage to cover cost of loading and unloading 5.00 714.00 9030.00
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 3570.00
(6*0.65) 1551876.05
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 15518.76
Road Roller 1567394.81
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 220218.97
LABOUR 1787613.78
Mate Beldar 268142.07
working with HMP, mechanical broom, paver, roller, asphalt cutter and 2055755.84
assistance for setting out lines, levels and layout of construction 20557.56
Skilled Beldar (for floor rubbing etc.) for checking line & levels 2076313.40
TOTAL 10870.75
Add 1 % Water charges on "W" TOTAL 10870.75
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say

16.57.2 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (p
by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100- 12
capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 191 cum (450 tonnes) MATERIAL tonne tonne 24.75 38150.00 944212.50
2211 Paving Asphalt VG-30 of approved quality @5.50% (percentage by tonne cum 24.75 163.93 4057.27
7280 weight of total mix Carriage of Tar bitumen cum 1.98 38100.00 75438.00
0296 Aggregate 42.525 1350.00 57408.75
0297 Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes 42.525 1350.00 57408.75
Weight of aggregate = 450 -24.75 =
425.25 tonnes
Taking density of aggregate = 1.5 tonne/cum Volume of aggregate
=425.25/1.5 =283.50cum Grading - II/19 mm (Nominal Size)
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
Waste Plastic @ 8% of the weigh of bitumen i.e. 24.75*8% Waste plastic
additive
Stone Aggregate (Single size) : 12.5 mm nominal size Qty = 85.05 * 50
/100
Stone Aggregate (Single size) : 10 mm nominal size
Qty = 85.05 * 50 /100
0297 Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100 cum cum cum 35.44 1350.00 47844.00
0298 Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100 cum 35.44 1400.00 49616.00
2903 Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100 quintal cum 119.07 1400.00 166698.00
2202 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% hour hour hour 275.00 163.93 45080.75
0777 ( percentage by weight of aggregate) Dry hydrated lime (factory made) hour hour 127.60 290.00 37004.00
2208 Carriage of Lime tonne km 9.89 163.93 1621.27
0062 (consitering density of lime as 1.29 T per cum) V = 12.758/1.29 hour hour hour 3.00 15000.00 45000.00
0063 = 9.89 cum day day 3.00 13000.00 39000.00
0064 MACHINERY/ HIRE CHARGES: day 6.00 1500.00 9000.00
0069 Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity 6.00 400.00 2400.00
0052 Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 6.00 1300.00 7800.00
0053 KVA 4500 3.30 14850.00
0055 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne 3.90 300.00 1485.00
0054 capacity (Taken 10km avarage lead) 450x10=4500 tonne km 3.90 600.00 1170.00
0056 Tipper -5 Cum 3.90 1200.00 2340.00
0128 Add 10 per cent of cost of carriage to cover cost of loading and unloading 0.84 714.00 4680.00
0114 Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 14.00 645.00 599.76
0139 (6*0.65) 5.00 714.00 9030.00
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 3570.00
Road Roller 1627314.05
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 16273.14
LABOUR 1643587.19
Mate Beldar 230924.00
working with HMP, mechanical broom, paver, roller, asphalt cutter and 1874511.19
assistance for setting out lines, levels and layout of construction 281176.68
Skilled Beldar (for floor rubbing etc.) for checking line & levels 2155687.86
TOTAL 21556.88
Add 1 % Water charges on "W" TOTAL 2177244.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 11399.19
Add 15% CPOH on "Y" TOTAL 11399.20
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say

16.57.3 40/50 mm compacted thickness with bitumen of grade PMB-40 @ 5.5% (percentage by weight of total mix) and lime filler @ 3%
by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


0312 Details of cost for 191 cum (450 tonnes) MATERIAL M.T. 24.75 32950.00 815512.50
2211 Bitumen grade PMB - 40 tonne 24.75 163.93 4057.27
@5.50% (percentage by weight of total mix Carriage of Tar bitumen
Aggregate
Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 -24.75 =
425.25 tonnes
Taking density of aggregate = 1.5 tonne/cum Volume of aggregate
=425.25/1.5 =283.50cum Grading - II/19 mm (Nominal Size)
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of
283.50 = 119.07 cum
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 42.525 1350.00 57408.75
0297 Qty = 85.05 * 50 /100 cum cum cum 42.525 1350.00 57408.75
0297 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.05 * 50 /100 cum cum 35.44 1350.00 47844.00
0298 Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100 quintal cum 35.44 1400.00 49616.00
2903 Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100 hour hour hour 119.07 1400.00 166698.00
2202 Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100 hour hour 275.00 163.93 45080.75
0777 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% tonne km 127.60 290.00 37004.00
2208 ( percentage by weight of aggregate) Dry hydrated lime (factory made) hour hour hour 9.89 163.93 1621.27
0062 Carriage of Lime day day 3.00 15000.00 45000.00
0063 (consitering density of lime as 1.29 T per cum) V = 12.758/1.29 day 3.00 13000.00 39000.00
0064 = 9.89 cum 6.00 1500.00 9000.00
0069 MACHINERY/ HIRE CHARGES: 6.00 400.00 2400.00
0052 Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity 6.00 1300.00 7800.00
0053 Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 4500.00 3.30 14850.00
0055 KVA 3.90 300.00 1485.00
0054 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne 3.90 600.00 1170.00
0056 capacity (Taken 10km avarage lead) 450x10=4500 tonne km 3.90 1200.00 2340.00
0128 Tipper -5 Cum 0.84 714.00 4680.00
0114 Add 10 per cent of cost of carriage to cover cost of loading and unloading 14.00 645.00 599.76
0139 Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 5.00 714.00 9030.00
(6*0.65) 3570.00
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 1423176.05
Road Roller 14231.76
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 1437407.81
LABOUR 201955.80
Mate Beldar 1639363.60
working with HMP, mechanical broom, paver, roller, asphalt cutter and 245904.54
assistance for setting out lines, levels and layout of construction 1885268.14
Skilled Beldar (for floor rubbing etc.) for checking line & levels 18852.68
TOTAL 1904120.82
Add 1 % Water charges on "W" TOTAL 9969.22
Add GST on "X" (multiplying factor 0.1405) TOTAL 9969.20
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say

16.57.4 40/50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage by weight of total mix) and lime filler @ 3%
(percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7741 Details of cost for 191 cum (450 tonnes) MATERIAL tonne 24.75 29150.00 721462.50
2211 Modified Bitumen Refinary produced CRMB - 60 @5.50% (percentage by tonne 24.75 163.93 4057.27
weight of total mix Carriage of Tar bitumen
Aggregate
Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 -24.75 =
425.25 tonnes
Taking density of aggregate = 1.5 tonne/cum Volume of aggregate
=425.25/1.5=283.50cum

0296 Grading - II/19 mm (Nominal Size) cum cum cum 42.525 1350.00 57408.75
0297 13.2 - 10mm size = 30% of 283.50 = 85.05 cum cum cum cum 42.525 1350.00 57408.75
0297 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of quintal cum 35.44 1350.00 47844.00
0298 283.50 = 119.07 cum hour hour 35.44 1400.00 49616.00
2903 Stone Aggregate (Single size) : 12.5 mm nominal size Qty = 85.05 * 50 hour hour hour 119.07 1400.00 166698.00
2202 /100 tonne km 275.00 163.93 45080.75
0777 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.05 * 50 /100 hour hour hour 127.60 290.00 37004.00
2208 Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100 day day 9.89 163.93 1621.27
0062 Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100 day 3.00 15000.00 45000.00
0063 Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100 3.00 13000.00 39000.00
0064 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% 6.00 1500.00 9000.00
0069 ( percentage by weight of aggregate) Dry hydrated lime (factory made) 6.00 400.00 2400.00
0052 Carriage of Lime 6.00 1300.00 7800.00
0053 (consitering density of lime as 1.29 T per cum) V = 12.758/1.29 4500.00 3.30 14850.00
0055 = 9.89 cum 3.90 300.00 1485.00
0054 MACHINERY/ HIRE CHARGES: 3.90 600.00 1170.00
0056 Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity 3.90 1200.00 2340.00
0128 Paver finisher Hydrostatic with sensor control 100 TPH 0.84 714.00 4680.00
0114 Generator 250 KVA 14.00 645.00 599.76
0139 Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne 5.00 714.00 9030.00
capacity (Taken 10km avarage lead) 450x10=4500 tonne km 3570.00
Tipper -5 Cum 1329126.05
Add 10 per cent of cost of carriage to cover cost of loading and unloading 13291.26
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 1342417.31
(6*0.65) 188609.63
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem 1531026.94
Road Roller 229654.04
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65) 1760680.98
LABOUR 17606.81
Mate Beldar 1778287.79
working with HMP, mechanical broom, paver, roller, asphalt cutter and 9310.41
assistance for setting out lines, levels and layout of construction 9310.40
Skilled Beldar (for floor rubbing etc.) for checking line & levels
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say
16.57.5 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (p
by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90
TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 191 cum (450 tonnes) MATERIAL tonne tonne 24.75 38150.00 944212.50
2211 Paving Asphalt VG-30 of approved quality @5.50% (percentage by cum cum cum 24.75 163.93 4057.27
0296 weight of total mix Carriage of Tar bitumen cum cum cum 42.525 1350.00 57408.75
0297 Aggregate quintal cum 42.525 1350.00 57408.75
0297 Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes hour hour hour 35.44 1350.00 47844.00
0298 Weight of aggregate = 450 -24.75 = 425.25 tonnes Taking density of hour 35.44 1400.00 49616.00
2903 aggregate = 1.5 tonne/cum Volume of aggregate =425.25/1.5 tonne km 119.07 1400.00 166698.00
2202 =283.50cum Grading - II/19 mm (Nominal Size) hour hour hour 275.00 163.93 45080.75
0777 13.2 - 10mm size = 30% of 283.50 = 85.05 cum day day 127.60 290.00 37004.00
2208 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of day 9.89 163.93 1621.27
0076 283.50 = 119.07 cum 6.00 12000.00 72000.00
0064 Stone Aggregate (Single size) : 12.5 mm nominal size Qty = 85.05 * 50 6.00 1500.00 9000.00
0069 /100 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.05 * 50 /100 6.00 1300.00 7800.00
0053 Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100 4500.00 3.30 14850.00
0055 Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100 3.90 300.00 1485.00
0054 Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100 3.90 600.00 1170.00
0056 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% 3.90 1200.00 2340.00
0128 ( percentage by weight of aggregate) Dry hydrated lime (factory made) 0.84 714.00 4680.00
0114 Carriage of Lime 14.00 645.00 599.76
0139 (consitering density of lime as 1.29 T per cum) V = 12.758/1.29 5.00 714.00 9030.00
= 9.89 cum 3570.00
MACHINERY/ HIRE CHARGES: 1539876.05
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual 15398.76
output 1555274.81
Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 218516.11
KVA 1773790.92
Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne 266068.64
capacity (Taken 10km avarage lead) 450x10=4500 tonne km 2039859.55
Tipper -5 Cum 20398.60
Add 10 per cent of cost of carriage to cover cost of loading and unloading 2060258.15
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling. 10786.69
(6*0.65) 10786.70
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem
Road Roller
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65)
LABOUR
Mate Beldar
working with HMP, mechanical broom, paver, roller, asphalt cutter and
assistance for setting out lines, levels and layout of construction
Skilled Beldar (for floor rubbing etc.) for checking line & levels
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 191 cum(450 Tonne) Cost per cum.
Say

16.57.6 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in dr
Hot Mix Plant of 60-90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


7309 Details of cost for 191 cum (450 tonnes) MATERIAL tonne tonne 24.75 38150.00 944212.50
2211 Paving Asphalt VG-30 of approved quality @5.50% (percentage by tonne 24.75 163.93 4057.27
7280 weight of total mix Carriage of Tar bitumen cum cum cum 1.98 38100.00 75438.00
0296 Waste Plastic @ 8% of the weigh of bitumen i.e. 24.75*8% Waste plastic cum cum cum 42.525 1350.00 57408.75
0297 additive quintal cum 42.525 1350.00 57408.75
0297 Aggregate hour 35.44 1350.00 47844.00
0298 Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes hour hour hour 35.44 1400.00 49616.00
2903 Weight of aggregate = 450 -24.75 = tonne km 119.07 1400.00 166698.00
2202 425.25 tonnes hour hour hour 275.00 163.93 45080.75
0777 Taking density of aggregate = 1.5 tonne/cum Volume of aggregate day day 127.60 290.00 37004.00
2208 =425.25/1.5=283.50cum Grading - II/19 mm (Nominal Size) 9.89 163.93 1621.27
0076 13.2 - 10mm size = 30% of 283.50 = 85.05 cum 6.00 12000.00 72000.00
0064 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 6.00 1500.00 9000.00
0069 283.50 = 119.07 cum 6.00 400.00 2400.00
0052 Stone Aggregate (Single size) : 12.5 mm nominal size Qty = 85.05 * 50 6.00 1300.00 7800.00
0053 /100 4500.00 3.30 14850.00
0055 Stone Aggregate (Single size) : 10 mm nominal size Qty = 85.05 * 50 /100 3.90 300.00 1485.00
0054 Stone Aggregate (Single size) : 10 mm nominal size Qty = 70.88 * 50 /100 3.90 600.00 1170.00
0056 Stone Aggregate (Single size) : 06 mm nominal size Qty = 70.88 * 50 /100 3.90 1200.00 2340.00
0128 Stone chippings/ screenings 4.75 mm nominal size Qty = 283.5 * 40 /100 0.84 714.00 4680.00
0114 Carriage of Stone aggregate below 40 mm nominal size Lime Filler @ 2% 14.00 645.00 599.76
( percentage by weight of aggregate) Dry hydrated lime (factory made) 9030.00
Carriage of Lime
(consitering density of lime as 1.29 T per cum) V = 12.758/1.29
= 9.89 cum
MACHINERY/ HIRE CHARGES:
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual
output Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 KVA
Front end loader 1 cum bucket capacity (incl POL) Topper 10 tonne
capacity (Taken 10km avarage lead) 450x10=4500 tonne km
Tipper -5 Cum
Add 10 per cent of cost of carriage to cover cost of loading and unloading
Smooth Wheeled Roller 8 to 10 tonne for initial break down rolling.
(6*0.65)
Vibratory roller 8 to 10 tonne for intermediate rolling.(6*0.65) Tandem
Road Roller
Finish rolling with 6-8 tonnes smooth wheeled tandem roller.(6*0.65)
LABOUR
Mate Beldar
working with HMP, mechanical broom, paver, roller, asphalt cutter and
assistance for setting out lines, levels and layout of construction
0139 Skilled Beldar (for floor rubbing etc.) day 5.00 714.00 3570.00
for checking line & levels
TOTAL 1615314.05
Add 1 % Water charges on "W" 16153.14
TOTAL 1631467.19
Add GST on "X" (multiplying factor 0.1405) 229221.14
TOTAL 1860688.33
Add 15% CPOH on "Y" 279103.25
TOTAL 2139791.57
Add Cess @ 1% on "Z" 21397.92
Cost for 191 cum(450 Tonne) 2161189.49
Cost per cum. 11315.13
Say 11315.15
16.57.7 40/50 mm compacted thickness with bitumen of grade PMB-40 @ 5.5% (percentage by weight of total mix) and lime filler @ 3%
(percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60- 90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 191 cum (450 tonnes)
MATERIAL
0312 Bitumen grade PMB - 40 M.T. 24.75 32950.00 815512.50
@5.50% (percentage by weight of total mix
2211 Carriage of Tar bitumen tonne 24.75 163.93 4057.27
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 -24.75 = 425.25 tonnes
Taking density of aggregate = 1.5 tonne/cum
Volume of aggregate =425.25/1.5 =283.50cum
Grading - II/19 mm (Nominal Size)
13.2 - 10mm size = 30% of 283.50 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07 cum
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 42.525 1350.00 57408.75
Qty = 85.05 * 50 /100
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 42.525 1350.00 57408.75
Qty = 85.05 * 50 /100
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 35.44 1350.00 47844.00
Qty = 70.88 * 50 /100
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 35.44 1400.00 49616.00
Qty = 70.88 * 50 /100
2903 Stone chippings/ screenings 4.75 mm nominal size cum 119.07 1400.00 166698.00
Qty = 283.5 * 40 /100
2202 Carriage of Stone aggregate below 40 mm nominal size cum 275.00 163.93 45080.75
Lime Filler @ 2% ( percentage by weight of aggregate)
0777 Dry hydrated lime (factory made) quintal 127.60 290.00 37004.00
2208 Carriage of Lime cum 9.89 163.93 1621.27
(consitering density of lime as 1.29 T per cum) V = 12.758/1.29
= 9.89 cum
MACHINERY/ HIRE CHARGES:
0076 Drum Type HMP of 60-90 TPH capacity @
75 tonne per hour actual output hour 6.00 12000.00 72000.00
0064 Paver finisher Hydrostatic with sensor
control 100 TPH hour 6.00 1500.00 9000.00
0069 Generator 250 KVA hour 6.00 400.00 2400.00
0052 Front end loader 1 cum bucket capacity
(incl POL) hour 6.00 1300.00 7800.00
Topper 10 tonne capacity (Taken 10km avarage lead)
450x10=4500 tonne km
0053 Tipper -5 Cum tonne km 4500.00 3.30 14850.00
Add 10 per cent of cost of carriage to cover cost of loading and
unloading 1485.00
0055 Smooth Wheeled Roller 8 to 10 tonne hour 3.90 300.00 1170.00
for initial break down rolling.(6*0.65)
0054 Vibratory roller 8 to 10 tonne hour 3.90 600.00 2340.00
for intermediate rolling.(6*0.65)

0056 Tandem Road Roller hour 3.90 1200.00 4680.00


Finish rolling with 6-8 tonnes smooth wheeled tandem
roller.(6*0.65)
LABOUR
0128 Mate day 0.84 714.00 599.76
0114 Beldar day 14.00 645.00 9030.00
working with HMP, mechanical broom, paver, roller, asphalt
cutter and assistance for setting out lines, levels and layout of
construction
0139 Skilled Beldar (for floor rubbing etc.) day 5.00 714.00 3570.00
for checking line & levels
TOTAL 1411176.05
Add 1 % Water charges on "W" 14111.76
TOTAL 1425287.81
Add GST on "X" (multiplying factor 0.1405) 200252.94
TOTAL 1625540.74
Add 15% CPOH on "Y" 243831.11
TOTAL 1869371.85
Add Cess @ 1% on "Z" 18693.72
Cost for 191 cum(450 Tonne) 1888065.57
Cost per cum. 9885.16
Say 9885.15

16.57.8 40/50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage by weight of total mix) and lime filler @ 3%
(percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60- 90 TPH capacity.

Code Description Unit Quantity Rate Rs. Amount Rs.

Details of cost for 191 cum (450 tonnes)

MATERIAL

7741 Modified Bitumen Refinary produced CRMB - 60 tonne 24.75 29150.00 721462.50

@5.50% (percentage by weight of total mix


2211 Carriage of Tar bitumen tonne 24.75 163.93 4057.27
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 -24.75 = 425.25 tonnes
Taking density of aggregate = 1.5 tonne/cum
Volume of aggregate =425.25/1.5 = 283.50cum
Grading - II/19 mm (Nominal Size)

13.2 - 10mm size = 30% of 283.50 = 85.05 cum


10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum

0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 42.525 1350.00 57408.75
Qty = 85.05 * 50 /100
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 42.525 1350.00 57408.75
Qty = 85.05 * 50 /100
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 35.44 1350.00 47844.00
Qty = 70.88 * 50 /100
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 35.44 1400.00 49616.00
Qty = 70.88 * 50 /100
2903 Stone chippings/ screenings 4.75 mm nominal size cum 119.07 1400.00 166698.00
Qty = 283.5 * 40 /100
2202 Carriage of Stone aggregate below 40 mm nominal size cum 275.00 163.93 45080.75
Lime Filler @ 2% ( percentage by weight of aggregate)
0777 Dry hydrated lime (factory made) quintal 127.60 290.00 37004.00
2208 Carriage of Lime cum 9.89 163.93 1621.27
(consitering density of lime as 1.29 T per cum) V = 12.758/1.29
= 9.89 cum
MACHINERY/ HIRE CHARGES:
0076 Drum Type HMP of 60-90 TPH capacity
@ 75 tonne per hour actual output hour 6.00 12000.00 72000.00
0064 Paver finisher Hydrostatic with sensor control 100 TPH hour 6.00 1500.00 9000.00
0069 Generator 250 KVA hour 6.00 400.00 2400.00
0052 Front end loader 1 cum bucket capacity (incl POL) hour 6.00 1300.00 7800.00
Topper 10 tonne capacity (Taken 10km avarage lead)
450x10=4500 tonne km
0053 Tipper -5 Cum tonne km 4500.00 3.30 14850.00
Add 10 per cent of cost of carriage to
cover cost of loading and unloading 1485.00
0055 Smooth Wheeled Roller 8 to 10 tonne hour 3.90 300.00 1170.00
for initial break down rolling.(6*0.65)
0054 Vibratory roller 8 to 10 tonne hour 3.90 600.00 2340.00
for intermediate rolling.(6*0.65)
0056 Tandem Road Roller hour 3.90 1200.00 4680.00
Finish rolling with 6-8 tonnes smooth wheeled tandem
roller.(6*0.65)
LABOUR
0128 Mate day 0.84 714.00 599.76
0114 Beldar day 14.00 645.00 9030.00
working with HMP, mechanical broom, paver, roller, asphalt
cutter and assistance for setting out lines, levels and layout of
construction
0139 Skilled Beldar (for floor rubbing etc.) day 5.00 714.00 3570.00
for checking line & levels
TOTAL 1317126.05
Add 1 % Water charges on "W" 13171.26
TOTAL 1330297.31
Add GST on "X" (multiplying factor 0.1405) 186906.77
TOTAL 1517204.08
Add 15% CPOH on "Y" 227580.61
TOTAL 1744784.69
Add Cess @ 1% on "Z" 17447.85
Cost for 191 cum(450 Tonne) 1762232.54
Cost per cum. 9226.35
Say 9226.35
16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully cover
intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or oth
combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhe
which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized a
alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixe
Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x1
the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be p
two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate ye
(vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epo
over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engine
charge.
16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details cost for 1 no. of 0.636 sqm
MATERIAL
Aluminium sheet 2 mm thick
3.14/4x(0.9)x(0.9)=0.636 sqm
add 10% wastage = 0.064 i.e. 0.700sqm
@ 5.60kg/ sqm = 3.92kg
2704 Aluminium Strip 40 mm wide and 2 mm thick kilogram 3.92 240.00 940.80
2302 Carriage of G.I. sheet and accessories tonne 0.00392 145.72 0.57
3.92kg or 0.00392 MT
High intensity retro reflective sheet = 0.70 sqm.
High intensity sheet for lettering / sign and
border etc.
Taking 40% Area =0.28sqm,total = 0.70 + 0.28 = 0.98 sqm
8690 High intensity retro - reflective sheet sqm 0.98 1443.00 1414.14
Steel work
Supporting frame 25x25x3mm for 900mm
dia board:-
3.14D=3.1416x0.90=2.83 metre
@ 1.10kg/m
Angle iron 35x35x.5mm for fixing the
support frame with vertical Tee-iron support
post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@ 4.50kg/m = 16.88 kg
Bass plate to be welded at bottom end of
tee (As hold fast)
(100x100x5mm)x7850/133)=0.39kg, total
= 3.11 + 0.26 +16.88 + 0.39 =
Add wastage @ 5% = 1.03
Total = 20.64 + 1.03 = 21.67kg.
10.2 Rate as per item no 10.2 of SH : Steel work kg 21.67 78.20 1694.59
LABOUR
0128 Mate day 0.01 714.00 7.14
0114 Beldar day 0.25 645.00 161.25
9999 Cost of material for drilling holes, nut bolts & rivets, fabrication
etc. L.S. 65.00 2.12 137.80
Painting with synthetic enamel paint on steel work
support frame 25x25x3mm
=2.83x0.10=0.283 sqm

Fixing angle 35x35x5mm


= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.75x0.20=0.750sqm
Base plate 100x100x5mm
Surface area = 2x[0.10x0.10] =0.02
4x0.10x0.005 = 0.002
Total = 1.069 sqm
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 1.07 131.45 140.65
Painting with epoxy paint on back side of aluminium sheet.
13.52.1 Rate as per Item no. 13.52.1 of SH: Finishing sqm 0.636 201.70 128.28
9999 Sundries and hold fast etc. L.S. 78.00 2.12 165.36
TOTAL 4790.59
Add 1 % Water charges on "W-A" 28.27
TOTAL 4818.86
Add GST on "X-A" (multiplying factor 0.1405) 401.17
TOTAL 5220.03
Add 15% CPOH on "Y-A" 488.48
TOTAL 5708.51
Add Cess @ 1% on "Z-A" 37.45
Cost of 1 no. 5745.96
Say 5745.95
16.59.2 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


2704 Details cost for 1 board of 0.35 sqm MATERIAL kilogram tonne 2.18 240.00 523.20
2302 Aluminium sheet 2 mm thick Area 1/2x(0.9)x(0.78)=0.35 sqm sqm 0.00218 145.72 0.32
8690 add 10% wastage = 0.04 i.e. 0.39sqm @ 5.60kg/ sqm = 2.18kg kg 0.55 1443.00 793.65
10.2 Aluminium Strip 40 mm wide and 2 mm thick Carriage of G.I. sheet and day day 21.05 78.20 1646.11
accessories 2.18kg or 0.00218 MT L.S. 0.01 714.00 7.14
High intensity retro reflective sheet = 0.39 sqm. 0.25 645.00 161.25
High intensity sheet for lettering / sign/symbol/ border etc. Taking 40% 65.00 2.12 137.80
Area =0.16sqm, total = 0.39 + 0.16 = 0.55 sqm High intensity retro -
reflective sheet
Steel work
Angle iron frame 25x25x3mm 3x0.90= 2.70 metre @ 1.10kg/m
Angle iron 35x35x.5mm for fixing the support frame to Tee- iron support
post 2x0.05=0.10m @ 2.6 kg/m = 0.26kg Vertical post of M.S. tee of
section ISNT 50x50x6mm = 1x3.65=3.65m @
4.50kg/m =16.43kg
Bass plate 100x100x5mm connected to bottom end of vertocal tee.
(0.10x0.10x0.005x7850kg =0.39kg,
total = 2.97+ 0.26 + 16.43 + 0.39 = 20.05kg.
Add wastage @ 5% = 1.00, total = 20.05 + 1.00 = 21.05kg Rate as per
item no 10.2 of SH : Steel work
LABOUR
Mate Beldar
Cost of material for drilling holes, nut bolts & rivets, fabrication etc.
Painting with synthetic enamel paint on Angle iron .
support frame 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
=1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of Tee 100x100x5mm
0.022 sqm
0128
0114
9999
13.61.1 Total = 1.036 sqm sqm 1.036 131.45 136.18
13.52.1 Rate as per item no 13.61.1 of SH : Finishing sqm L.S. 0.35 201.70 70.60
9999 Painting with epoxy paint on back side of aluminium sheet. 0.35 sqm 65.00 2.12 137.80
Rate as per Item no. 13.52.1 of SH: Finishing Sundries & hold fast etc. 3614.04
TOTAL 17.61
Add 1 % Water charges on "W-A" TOTAL 3631.66
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 249.92
Add 15% CPOH on "Y-A" TOTAL 3881.57
Add Cess @ 1% on "Z-A" Cost of 1 board. 304.30
Say 4185.88
23.33
4209.21
4209.20

16.60 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to
covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 a
by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade,
substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 a
the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centr
the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of ep
grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners,
down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and dir
the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be me
payment).
16.60.1 Overhead informatory road signage

Code Description Unit Quantity Rate Rs. Amount Rs.


2704 Details of cost for boards area 3.00x1.20 =3.60 sqm MATERIAL kilogram 21.17 240.00 5080.80
2302 Aluminium Strip 40 mm wide and 2 mm thick Add 5% wastage = 1.01 kg tonne 0.02117 145.72 3.08
8690 Total = 20.16 + 1.01 = 21.17 kg. sqm 100 Nos 5.04 1443.00 7272.72
0588 Carriage of G.I. sheet and accessories high intensity sheet for written L.S. 0.34 180.00 61.20
9999 matter. Taking 40% 3.60x40% = 1.44 sqm. L.S. 52.00 2.12 110.24
9999 Total = 3.60 + 1.44 = 5.04 sqm. L.S. 390.00 2.12 826.80
9999 High intensity retro - reflective sheet Chromium plated Brass screws 25 sqm 564.20 2.12 1196.10
13.52.1 mm for peripheries = 2x(300+120)/30=28 nos. For vertical Rows = 2x 3.60 201.70 726.12
(120/30-2)=4 nos. Total= 28 + 4 = 32nos. 15277.07
For wastage @ 5% =2 nos. 145.51
Total = 32 +2 = 34 nos. 15422.58
Labour charges for drilling holes 2064.85
Hire charges of drill machine and sundries Hoisting board 17487.43
Labour charges for manufacturing of board including . fixing retro 2514.20
reflective sheet 20001.63
Painting with epoxy paint on back side of Aluminium sheet, Rate as per 192.76
Item no. 13.52.1 of SH: Finishing 20194.38
TOTAL 5609.55
Add 1 % Water charges on "W-A" TOTAL 5609.55
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 3.60 sqm
Cost of 1 sqm.
Say
16.61 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick
aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-c
Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The alu
sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. an
mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enam
over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate pri
complete in all respects as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


2704 Details cost for one board of 0.635 sqm Aluminium sheet 2mm thick = kilogram 3.98 240.00 955.20
8690 0.635 sqm. Add 10% wastage = 0.06 sqm, total = 0.635 + 0.06 = 0.695 sqm 0.98 1443.00 1414.14
10.2 sqm. kg 29.76 78.20 2327.23
0128 Say 0.70 sqm @ 5.6kg/sqm = 3.98 kg MATERIAL day day 0.01 714.00 7.14
0114 Aluminium Strip 40 mm wide and 2 mm thick High intensity retro reflective L.S. 0.25 645.00 161.25
9999 sheet = 0.70 sqm sqm 70.23 2.12 148.89
13.61.1 high intensity sheet for lettering/ sing and border etc. Taking 40% sqm L.S. 1.09 131.45 143.28
13.52.1 Area=0.28 sqm, total = 0.70 + 0.635 201.70 128.08
9999 0.28 = 0.98 sqm. 31.20 2.12 66.14
High intensity retro - reflective sheet Angle iron 40x40x4mm = 5351.35
4x0.60=2.40@ 2.4kg/ mtr = 5.76 kg 27.53
50x50x5 mm = 2x4m =8m @ 3kg/ mtr 5378.88
=24.00 kg 390.63
Total = 5.76 + 24.00 = 29.76 kg 5769.51
Rate as per item no 10.2 of SH : Steel work LABOUR 475.64
Mate Beldar 6245.15
Cost of material for drilling holes, nut bolts & rivets, facrication etc. 36.47
(e) Painting with synthetic enamel paint 1x2.40.12=0.29 sqm 6281.62
1x4.00x0.12=0.80 sqm, 6281.60
Total = 0.29 + 0.80 = 1.09 sqm
Rate as per item no 13.61.1 of SH : Finishing
Painting with epoxy paint on back side of aluminium sheet, Rate as per
Item no. 13.52.1 of SH: Finishing
Sundries & hole fast etc, TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 board
Say

16.62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic m
fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profil
heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, o
and foreign material etc. complete as per direction of Engineer-in-charge and
accordance with applicable specifications.

Code Description Unit Quantity Rate Rs. Amount Rs.


8687 Details of cost for 200 sqm (Area covered on one day):- MATERIAL kg 1050.00 66.00 69300.00
8688 Thermoplastic paint screeded in paint form for 2.5 mm thick road making kg day 50.00 72.00 3600.00
0033 stripe including glass beads etc. as per specifications day kg 1.00 800.00 800.00
0083 200 sqm @ 5kg/ sqm = 1000 kg Wastage @ 5% = 50kg day day day 1.00 1400.00 1400.00
1241 Total = 1050 kg Thermoplastic paint 142.00 84.00 11928.00
0157 Glass beads (B-class) to be sprayed over the paint stripe @ 250 gms. Per 1.00 784.00 784.00
0139 sqm = 100x0.25=25 kg 4.00 714.00 2856.00
0114 Glass beads MACHINERY 4.00 645.00 2580.00
Paint applicator. 93248.00
Hire charges of TATA 407 or equivalent for local shifting. 932.48
Commercial LPG in cylinder. LABOUR 94180.48
Operator (Pile/ Special machine) Skilled Beldar (for floor rubbing etc.) 13232.36
Beldar 107412.84
TOTAL 16111.93
Add 1 % Water charges on "W" TOTAL 123524.76
Add GST on "X" (multiplying factor 0.1405) TOTAL 1235.25
Add 15% CPOH on "Y" TOTAL 124760.01
Add Cess @ 1% on "Z" Cost for 200 sqm 623.80
Cost per sqm 623.80
Say

16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6
stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted w
sand, including
finishing the top smooth etc. complete and as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0287 Details of cost for 10 sqm. METERIAL cum cum cum 1.00 650.00 650.00
2260 Brick Aggregate (Single size) : 40 mm nominal size Carriage of Brick cum 1.00 178.19 178.19
6501 aggregate day day day 0.08 1300.00 104.00
2335 Sand zone V (Jamuna) Carriage of Jamuna sand cum 0.08 163.93 13.11
0114 Labour for spreading, ramming and consolidation. Beldar 0.35 645.00 225.75
0115 Coolie Bhisti 0.26 645.00 167.70
0101 Cement concrete-1:3:6 0.18 714.00 128.52
4.1.6 Rate as per item no 4.1.6 of SH : Concrete Work 0.50 6670.25 3335.13
TOTAL 4802.40
Add 1 % Water charges on "W-A" TOTAL 14.67
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 4817.07
Add 15% CPOH on "Y-A" TOTAL 208.21
Add Cess @ 1% on "Z-A" Cost for 10 sqm. 5025.29
Cost for 1 sqm. 253.52
Say 5278.81
19.44
5298.25
529.82
529.80

16.64 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well
consolidating and grouting with jamuna sand, including finishing
smooth etc. complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0287 Details of cost for 10 sqm. METERIAL cum cum cum 1.00 650.00 650.00
2260 Brick Aggregate (Single size) : 40 mm nominal size Carriage of Brick cum 1.00 178.19 178.19
6501 aggregate day day day 0.08 1300.00 104.00
2335 Sand zone V (Jamuna) Carriage of Jamuna sand 0.08 163.93 13.11
0114 Labour for spreading, ramming and consolidation. Beldar 0.35 645.00 225.75
0115 Coolie Bhisti TOTAL 0.26 645.00 167.70
0101 Add 1 % Water charges on "W" TOTAL 0.18 714.00 128.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 1467.27
Add 15% CPOH on "Y" TOTAL 14.67
Add Cess @ 1% on "Z" Cost for 10 sqm. 1481.95
Cost for 1 sqm. 208.21
Say 1690.16
253.52
1943.68
19.44
1963.12
196.31
196.30

16.65 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and moun
pipe of 65 mm dia duly powder coated anti-rust and anti theft
steel to be installed as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8685 Details of cost for 1 no. MATERIAL each L.S. 1.00 336.00 336.00
9999 Delineator Fixing materials. Fixing charges. TOTAL L.S. 78.00 2.12 165.36
9999 Add 1 % Water charges on "W" TOTAL 39.00 2.12 82.68
Add GST on "X" (multiplying factor 0.1405) TOTAL 584.04
Add 15% CPOH on "Y" TOTAL 5.84
Add Cess @ 1% on "Z" Cost of 1 no. 589.88
Say 82.88
672.76
100.91
773.67
7.74
781.41
781.40

16.66 Excavating holes upto 0.10 cum, including getting out the excavated soil, then returning the soil as
deported in layers not exceeding 20 cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplu
excavated soil as directed with in a lead of 50 mm and lift upto 1.5 m.
16.66.1 All kind of soil

Code Description Unit Quantity Rate Rs. Amount Rs.


2.8.1 Details of cost for 30 holes- Earth work 30x0.10 = 3.0 cum. cum L.S. 3.00 286.85 860.55
9999 Extra labour for filling and ramming 13.52 2.12 28.66
Rate as per item no. 2.8.1 of SH: Earth work Sundries 889.21
TOTAL 0.29
Add 1 % Water charges on "W-A" TOTAL 889.50
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 4.07
Add 15% CPOH on "Y-A" TOTAL 893.57
Add Cess @ 1% on "Z-A" Cost of 30 holes 4.95
Cost of 1 hole 898.52
Say 0.38
898.90
29.96
29.95
16.67 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including
reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed
average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of
same cement mortar and making grooves etc. complete as per direction of Engineer-in-
charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8694 Details of cost for 10 sqm MATERIAL each L.S. 48.00 145.00 6960.00
9977 Precast pavement slab 450 x 450 x 50 mm (M - 30) Carriage of slab. cum 52.00 2.12 110.24
3.10 20mm (bed and joints) CM. 1:5 (1 cement: 5 coarse sand) Rate as per day day day 0.25 3995.00 998.75
0155 Item Number 3.10 of SH: Mortars day L.S. 1.10 749.00 823.90
0100 LABOUR 1.10 714.00 785.40
0114 Mason (average) Bandhani 0.55 645.00 354.75
0101 Beldar Bhisti Sundries TOTAL 0.27 714.00 192.78
9999 Add 1 % Water charges on "W" TOTAL 10.79 2.12 22.87
Add GST on "X" (multiplying factor 0.1405) TOTAL 10248.69
Add 15% CPOH on "Y" TOTAL 102.49
Add Cess @ 1% on "Z" Cost for 10 sqm. 10351.18
Cost for 1 sqm 1454.34
Say 11805.52
1770.83
13576.35
135.76
13712.11
1371.21
1371.20

16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making
with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick com
of coarse sand, filling the
joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8689 Details of cost for 10.00 sqm MATERIAL sqm cum 10.00 440.00 4400.00
0982 Interlocking C.C. paver block ( 60 mm thick, M-30) Bedding layer - 50mm cum cum cum 0.50 1500.00 750.00
2203 thick day day day 0.50 163.93 81.97
0983 Coarse sand (zone III) day 0.15 900.00 135.00
2203 =10x0.050=0.50 cum 0.15 163.93 24.59
0123 Carriage of Coarse sand Fine sand (zone IV) Carriage of fine sand 0.50 784.00 392.00
0124 Laying charges (Bassed on actual observation) LABOUR 0.50 714.00 357.00
0114 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 1.00 645.00 645.00
0115 Coolie TOTAL 0.50 645.00 322.50
Add 1 % Water charges on "W" TOTAL 7108.05
Add GST on "X" (multiplying factor 0.1405) TOTAL 71.08
Add 15% CPOH on "Y" TOTAL 7179.14
Add Cess @ 1% on "Z" Cost for 10.00 sqm Cost for 1.00 sqm. 1008.67
Say 8187.80
1228.17
9415.97
94.16
9510.13
951.01
951.00
16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required
and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of join
sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-
(length of finished kerb edging shall be measured for payment). (Precast
C.C. kerb stone shall be approved by Engineer-in-charge).

Code Description Unit Quantity Rate Rs. Amount Rs.


8686 Details of cost 100 metre i.e. 100x0.375x0.20=7.50 cum. cum 7.41 5600.00 41496.00
3.8 No. of kerb stones = 100/0.405=247 Nos cum 0.073 5024.15 366.76
0123 Precast C.C. Kerb stone M - 25 = 247x0.40x0.375x0.20=7.41 cum day day day 2.50 784.00 1960.00
0124 METERIAL day 2.50 714.00 1785.00
0114 Precast C.C. Kerb stone M - 25 2.50 645.00 1612.50
0115 Mortar 1:3 for fixing joints = 246x1x[(0.115+0.20)/2] x 0.375x0.005 = 1.65 645.00 1064.25
0.073 cum. 48284.51
Cement mortar 1:3 (1 cement : 3 coarse sand) Rate as per Item Number 482.85
3.8 of SH: Mortars Labour for fixing of kerb stones 48767.36
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 6851.81
Coolie TOTAL 55619.17
Add 1 % Water charges on "W" TOTAL 8342.88
Add GST on "X" (multiplying factor 0.1405) TOTAL 63962.05
Add 15% CPOH on "Y" TOTAL 639.62
Add Cess @ 1% on "Z" 64601.67
Cost of 7.50 cum cost for 1 cum. Say 8613.56
8613.55

16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm
nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
16.70.1 Made of G.I. wire of dia 4 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


8695 Details of cost for 10 sqm. MATERIAL sqm L.S. 10.50 300.00 3150.00
9977 G.I. chain link 50x50 mm mesh = 10.00 sqm. Wastage @ 5% = 0.50 sqm. day day L.S. 156.00 2.12 330.72
0103 Total = 10.50 sqm. 2.14 714.00 1527.96
0114 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 1.62 645.00 1044.90
9999 4 mm 174.75 2.12 370.47
Carriage. 6424.05
LABOUR 64.24
Blacksmith 2nd class Beldar 6488.29
Sundries including G.I. wire, nuts and bolts and warshers. TOTAL 911.60
Add 1 % Water charges on "W" TOTAL 7399.90
Add GST on "X" (multiplying factor 0.1405) TOTAL 1109.98
Add 15% CPOH on "Y" TOTAL 8509.88
Add Cess @ 1% on "Z" Cost for 10 sqm. 85.10
Cost for 1 sqm. 8594.98
Say 859.50
859.50

16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
Code Description Unit Quantity Rate Rs. Amount Rs.
8696 Details of cost for 10 sqm. MATERIAL sqm L.S. 10.50 330.00 3465.00
9977 G.I. chain link 50x50 mm mesh PVC coated = 10.00 sqm. Wastage @ 5% day day L.S. 156.00 2.12 330.72
0103 = 0.50 sqm. 2.14 714.00 1527.96
0114 Total = 10.50 sqm. 1.62 645.00 1044.90
9999 Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 174.75 2.12 370.47
4 mm, PVC coated to outer dia 5 mm 6739.05
Carriage. 67.39
LABOUR 6806.44
Blacksmith 2nd class Beldar 956.30
Sundries including G.I. wire, nuts and bolts and warshers. TOTAL 7762.75
Add 1 % Water charges on "W" TOTAL 1164.41
Add GST on "X" (multiplying factor 0.1405) TOTAL 8927.16
Add 15% CPOH on "Y" TOTAL 89.27
Add Cess @ 1% on "Z" Cost for 10 sqm. 9016.43
Cost for 1 sqm. 901.64
Say 901.65

16.71 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm includ
strengthening with 2 mm dia wire or nuts, bolts and washers as required
complete as per the direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8697 Details of cost for 10 sqm. MATERIAL sqm L.S. 10.50 380.00 3990.00
9977 G.I. chain link 25x25 mm mesh = 10.00 sqm. Wastage @ 5% = 0.50 sqm. day day L.S. 156.00 2.12 330.72
0103 Total = 10.50 sqm. 2.14 714.00 1527.96
0114 Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 1.62 645.00 1044.90
9999 3 mm 174.75 2.12 370.47
Carriage. 7264.05
LABOUR 72.64
Blacksmith 2nd class Beldar 7336.69
Sundries including G.I. wire, nuts and bolts and warshers. TOTAL 1030.81
Add 1 % Water charges on "W" TOTAL 8367.50
Add GST on "X" (multiplying factor 0.1405) TOTAL 1255.12
Add 15% CPOH on "Y" TOTAL 9622.62
Add Cess @ 1% on "Z" Cost for 10 sqm. 96.23
Cost for 1 sqm. 9718.85
Say 971.88
971.90

16.72 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.

Code Description Unit Quantity Rate Rs. Amount Rs.


1158 Detail of cost for 2.25 cum MATERIAL cum 2.25 600.00 1350.00
2215 22.5 cm thick stone (Hard) cum 2.25 192.86 433.94
Stone for pitching 15 cm x 22.5 cm 1783.94
Carriage by mechanical transport i/c loading unloading and stacking 17.84
Carriage of Soling stone & masonary stone TOTAL 1801.77
Add 1 % Water charges on "W" TOTAL 253.15
Add GST on "X" (multiplying factor 0.1405) TOTAL 2054.92
Add 15% CPOH on "Y" TOTAL 308.24
Add Cess @ 1% on "Z" Cost for 2.25 cum 2363.16
Cost for one cum 23.63
Say 2386.79
1060.80
1060.80

16.73 Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 c
minimum depth of 20 cm including preparing the bedding surface etc. all
complete. (Payment for Stone to be made separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


0123 Detail of cost for 10 sqm LABOUR day day day 1.08 784.00 846.72
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day L.S. 1.08 714.00 771.12
0114 Coolie Sundries TOTAL 2.15 645.00 1386.75
0115 Add 1 % Water charges on "W" TOTAL 1.61 645.00 1038.45
9999 Add GST on "X" (multiplying factor 0.1405) TOTAL 6.76 2.12 14.33
Add 15% CPOH on "Y" TOTAL 4057.37
Add Cess @ 1% on "Z" Cost for 10 sqm 40.57
Cost for one sqm 4097.94
Say 575.76
4673.71
701.06
5374.76
53.75
5428.51
542.85
542.85

16.74 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :
16.74.1 Moorum

Code Description Unit Quantity Rate Rs. Amount Rs.


0810 Details of cost for 100 sqm MATERIAL cum 7.50 500.00 3750.00
2265 Moorum cum 7.50 163.93 1229.48
0114 Carriage by mechanical transport i/c loading unloading and stacking day day 1.64 645.00 1057.80
0101 Carriage of Moorum LABOUR 0.13 714.00 92.82
Beldar Bhisti TOTAL 6130.10
Add 1 % Water charges on "W" TOTAL 61.30
Add GST on "X" (multiplying factor 0.1405) TOTAL 6191.40
Add 15% CPOH on "Y" TOTAL 869.89
Add Cess @ 1% on "Z" Cost for 100 sqm 7061.29
Cost per sqm 1059.19
Say 8120.48
81.20
8201.68
82.02
82.00

16.74.2 Stone aggregate 20 mm nominal size


Code Description Unit Quantity Rate Rs. Amount Rs.
0295 Detail of cost for 100 sqm MATERIAL cum cum 7.50 1400.00 10500.00
2202 Stone Aggregate (Single size) : 20 mm nominal size 100sqm x7.50cm= day day 7.50 163.93 1229.48
0114 7.50 cum 2.05 645.00 1322.25
0101 Carriage of Stone aggregate below 40 mm nominal size LABOUR 0.13 714.00 92.82
Beldar Bhisti TOTAL 13144.55
Add 1 % Water charges on "W" TOTAL 131.45
Add GST on "X" (multiplying factor 0.1405) TOTAL 13275.99
Add 15% CPOH on "Y" TOTAL 1865.28
Add Cess @ 1% on "Z" Cost for 100 sqm 15141.27
Cost per sqm 2271.19
Say 17412.46
174.12
17586.58
175.87
175.85

16.74.3 Stone aggregate 40 mm nominal size

Code Description Unit Quantity Rate Rs. Amount Rs.


0293 Detail of cost for 100 sqm MATERIAL cum cum 7.50 1300.00 9750.00
2206 Stone Aggregate (Single size) : 40 mm nominal size 100sqm x7.50cm= day day 7.50 178.19 1336.43
0114 7.50 cum 2.05 645.00 1322.25
0101 Carriage of Stone aggregate 40 mm nominal size and above LABOUR 0.13 714.00 92.82
Beldar Bhisti TOTAL 12501.50
Add 1 % Water charges on "W" TOTAL 125.01
Add GST on "X" (multiplying factor 0.1405) TOTAL 12626.51
Add 15% CPOH on "Y" TOTAL 1774.02
Add Cess @ 1% on "Z" Cost for 100 sqm 14400.53
Cost per sqm 2160.08
Say 16560.61
165.61
16726.22
167.26
167.25

16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete sha
and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. comple
specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design
mix is payable/ recoverable separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.1.1 Details of cost for 1.00 cum MATERIAL cum 1.00 7997.30 7997.30
9999 Ready mix concrete M 25 = 1.00 cum. i/c placing of concrete, vibrating, L.S. 57.20 2.12 121.26
9999 leveling etc. L.S. 41.60 2.12 88.19
Rate as per Item No.5.33.1.1 of SH:RCC 8206.76
Operational charges for vacuum dewatering system i/c screed vibration , 2.09
placing of filter mat , top mat, vacuum process, floating , troweling, 8208.85
Brooming etc. 29.72
T& P charges i/c consumable power charges, loading , unloading and hire 8238.57
charges of equipments 36.19
TOTAL 8274.76
Add 1 % Water charges on "W-A" TOTAL 2.77
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 8277.54
Add 15% CPOH on "Y-A" TOTAL 8277.55
Add Cess @ 1% on "Z-A" Cost for 1 cum
Say

16.76 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement.

Code Description Unit Quantity Rate Rs. Amount Rs.


0367 Details of cost for 1 cum. Cement for M-25 mix = 0.410 t Cement for M - tonne tonne 0.027 5000.00 135.00
2209 20 mix = 0.383 t Difference = 0.027 t kilogram 0.027 145.72 3.93
7318 METERIAL 0.135 29.00 3.92
Portland Cement (OPC-43 grade) Carriage of Cement 142.85
Plasticizer for M- 25 mix = 2.050kg Plasticizer for M- 20 mix = 1.915 kg 1.43
Difference = 0.135 kg 144.28
Plasticizer / super plasticizer TOTAL 20.27
Add 1 % Water charges on "W" TOTAL 164.55
Add GST on "X" (multiplying factor 0.1405) TOTAL 24.68
Add 15% CPOH on "Y" TOTAL 189.23
Add Cess @ 1% on "Z" Cost for 1 cum. 1.89
Say 191.12
191.10

16.77 Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead u
mechanical means).

Code Description Unit Quantity Rate Rs. Amount Rs.


0128 Details of cost for 100 sqm LABOUR day day 0.01 714.00 7.14
0114 Mate Beldar day day day 0.25 645.00 161.25
0038 MACHINERY 0.01 1200.00 12.00
0014 Tractor with ripper attachment. Front end loader capacity 1.00 cum Hire 0.025 6000.00 150.00
0017 and running charges of tipper TOTAL 0.02875 3750.00 107.81
Add 1 % Water charges on "W" 438.20
TOTAL 4.38
442.58

Add GST on "X" (multiplying factor 0.1405) TOTAL 62.18


Add 15% CPOH on "Y" TOTAL 504.77
Add Cess @ 1% on "Z" Cost for 100 sqm 75.72
Cost for 1 sqm 580.48
Say 5.80
586.29
5.86
5.85
Add GST on "X" (multiplying factor 0.1405) TOTAL 62.18
Add 15% CPOH on "Y" TOTAL 504.77
Add Cess @ 1% on "Z" Cost for 100 sqm 75.72
Cost for 1 sqm 580.48
Say 5.80
586.29
5.86
5.85

16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mi
OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor g
prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions o
in-Charge.
16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Code Description Unit Quantity Rate Rs. Amount Rs.


0292 Details of cost for 225 cum (450 tonnes) MATERIAL cum cum cum 72.00 1000.00 72000.00
0297 Close graded graunlar sub-base material as per Grading-I of cum cum cum 72.00 1350.00 97200.00
2206 specifications cum cum cum 72.00 178.19 12829.68
2202 53mm to 9.5mm @ 50% = 144 cum hour 72.00 163.93 11802.96
1179 9.5 mm to 2.36mm @ 20% = 57 cum 2.36mm below @ 30% = 86.40 cum hour hour 57.00 900.00 51300.00
2202 Stone Aggregate (Single size) : 50 mm nominal size Stone Aggregate hour 57.00 163.93 9344.01
2903 (Single size) : 10 mm nominal size tonne km 43.20 1400.00 60480.00
2904 Carriage of Stone aggregate 40 mm nominal size and above Carriage of hour hour 43.20 1400.00 60480.00
2203 Stone aggregate below 40 mm nominal size Crushed stone 2.36 mm to day day day 86.40 163.93 14163.55
0059 12.5 mm size 6.00 950.00 5700.00
0070 Carriage of Stone aggregate below 40 mm nominal size Stone chippings/ 6.00 300.00 1800.00
0057 screenings 4.75 mm nominal size Stone chippings/ screenings 150 4.50 200.00 900.00
0052 micron nominal size Carriage of Coarse sand 6.00 1300.00 7800.00
0053 Machinery/ Hire charges: 4500.00 3.30 14850.00
0050 Wet Mix Plant 60 TPH @75 tonne capacity 6.00 2400.00 1485.00
0054 Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity 5 km lead 6.00 600.00 14400.00
0128 with one trip per hour 0.40 714.00 3600.00
0139 Front end loader 1 cum bucket capacity (incl POL) 2.00 714.00 285.60
0114 Tipper 10 tonne capacity( taking lead= 10 Km) =450x10 =4500 tonne km 8.00 645.00 1428.00
Tipper -5 Cum 5160.00
Add 10 per cent of cost of carriage to cover cost of loading and unloading 447008.80
Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne LABOUR 4470.09
Mate 451478.89
Skilled Beldar (for floor rubbing etc.) Beldar 63432.78
TOTAL 514911.67
Add 1 % Water charges on "W" TOTAL 77236.75
Add GST on "X" (multiplying factor 0.1405) TOTAL 592148.43
Add 15% CPOH on "Y" TOTAL 5921.48
Add Cess @ 1% on "Z" 598069.91
Cost for 225 cum(450 Tonne) Cost per cum. 2658.09
Say 2658.10

16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Code Description Unit Quantity Rate Rs. Amount Rs.


0294 Details of cost for 225 cum (450 tonnes) MATERIAL cum cum cum 50.40 1350.00 68040.00
0297 Close graded graunlar sub-base material as per Grading-I of cum cum cum 50.40 1350.00 68040.00
2202 specifications cum cum 100.80 163.93 16524.14
1179 26.5mm to 9.5mm @ 35% = 100.80 cum hour 72.00 900.00 64800.00
2202 9.5 mm to 2.36mm @ 25% = 72 cum 2.36mm below @ 40% = 115.20 hour hour 72.00 163.93 11802.96
2903 cum hour 57.60 1400.00 80640.00
2904 Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate tonne km 57.60 1400.00 80640.00
2203 (Single size) : 10 mm nominal size Carriage of Stone aggregate below 40 hour hour 115.20 163.93 18884.74
0059 mm nominal size Crushed stone 2.36 mm to 12.5 mm size day day day 6.00 950.00 5700.00
0070 Carriage of Stone aggregate below 40 mm nominal size Stone chippings/ 6.00 300.00 1800.00
0057 screenings 4.75 mm nominal size Stone chippings/ screenings 150 4.50 200.00 900.00
0052 micron nominal size Carriage of Coarse sand 6.00 1300.00 7800.00
0053 Machinery/ Hire charges: 4500.00 3.30 14850.00
0050 Wet Mix Plant 60 TPH @75 tonne capacity 6.00 2400.00 1485.00
0054 Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity 5 km lead 6.00 600.00 14400.00
0128 with one trip per hour 0.40 714.00 3600.00
0139 Front end loader 1 cum bucket capacity (incl POL) Tipper 10 tonne 2.00 714.00 285.60
0114 capacity( taking lead= 10 8.00 645.00 1428.00
Km) =450x10 =4500 tonne km Tipper -5 Cum 5160.00
Add 10 per cent of cost of carriage to cover cost of loading and unloading 466780.44
Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne LABOUR 4667.80
Mate 471448.24
Skilled Beldar (for floor rubbing etc.) Beldar 66238.48
TOTAL 537686.72
Add 1 % Water charges on "W" TOTAL 80653.01
Add GST on "X" (multiplying factor 0.1405) TOTAL 618339.73
Add 15% CPOH on "Y" TOTAL 6183.40
Add Cess @ 1% on "Z" 624523.13
Cost for 225 cum(450 Tonne) Cost per cum. 2775.66
Say 2775.65

16.78.3 With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20

Code Description Unit Quantity Rate Rs. Amount Rs.


1179 Details of cost for 225 cum (450 tonnes) MATERIAL cum cum cum 100.80 900.00 90720.00
2202 Close graded graunlar sub-base material as per Grading-III of cum cum cum 100.80 163.93 16524.14
1179 specifications cum 36.00 900.00 32400.00
2202 9.5mm to 4.75mm @ 35% = 100.80 cum 4.75 mm to 2.36mm @ 12.5% = hour 36.00 163.93 5901.48
2903 36.00 cum 2.36mm below @ 52.5% = 151.20 cum Crushed stone 2.36 hour hour 75.60 1400.00 105840.00
2904 mm to 12.5 mm size hour 75.60 1400.00 105840.00
2203 Carriage of Stone aggregate below 40 mm nominal size Crushed stone tonne km 151.20 163.93 24786.22
0059 2.36 mm to 12.5 mm size hour hour 6.00 950.00 5700.00
0070 Carriage of Stone aggregate below 40 mm nominal size Stone chippings/ day day day 6.00 300.00 1800.00
0057 screenings 4.75 mm nominal size Stone chippings/ screenings 150 4.50 200.00 900.00
0052 micron nominal size Carriage of Coarse sand 6.00 1300.00 7800.00
0053 Machinery/ Hire charges: 4500.00 3.30 14850.00
0050 Wet Mix Plant 60 TPH @75 tonne capacity 6.00 2400.00 1485.00
0054 Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity 5 km lead 6.00 600.00 14400.00
0128 with one trip per hour 0.40 714.00 3600.00
0139 Front end loader 1 cum bucket capacity (incl POL) 2.00 714.00 285.60
0114 Tipper 10 tonne capacity( taking lead= 10Km) =450x10 =4500 t.Km 8.00 645.00 1428.00
Tipper -5 Cum 5160.00
Add 10 per cent of cost of carriage to cover cost of loading and unloading 439420.44
Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne LABOUR 4394.20
Mate 443814.64
Skilled Beldar (for floor rubbing etc.) Beldar 62355.96
TOTAL 506170.60
Add 1 % Water charges on "W" TOTAL 75925.59
Add GST on "X" (multiplying factor 0.1405) TOTAL 582096.19
Add 15% CPOH on "Y" TOTAL 5820.96
Add Cess @ 1% on "Z" 587917.15
Cost for 225 cum(450 Tonne) Cost per cum. 2612.97
Say 2612.95

16.79 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (W
specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinish
base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired
density, complete as per specifications and directions of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0292 Details of cost for 225 cum (495 tonne) MATERIAL cum cum cum 22.275 1000.00 22275.00
0293 Conforming to table …… cum cum cum 22.275 1300.00 28957.50
0294 45mm to22.4mm @ 30% = 89.10 cum Qty for 0292,0293,0294,0295 cum cum cum 22.275 1350.00 30071.25
0295 codes = 89.10 / 4 = 22.275 cum cum cum cum 22.275 1400.00 31185.00
2206 Qty for 2206, 2202 codes = 89.10 /2 = 44.55 cum cum 44.55 178.19 7938.36
2202 22.4 mm to 2.36mm @ 40% = 118.80 cum hour 44.55 163.93 7303.08
0294 Qty for 0294,0295 codes = 118.80 /4 = 29.70 cum Qty for 1179 code = hour hour 29.70 1350.00 40095.00
0295 118.80 /2 = 59.40 cum hour 29.70 1400.00 41580.00
1179 2.36 mm to 75 microon @ 30% = 89.10 cum tonne km 59.40 900.00 53460.00
2202 Qty for 2903, 2904 codes = 89.10 / 2 = 44.55 cum Stone Aggregate hour hour 118.80 163.93 19474.88
2903 (Single size) : 50 mm nominal size Stone Aggregate (Single size) : 40 mm day day day 44.55 1400.00 62370.00
2904 nominal size Stone Aggregate (Single size) : 25 mm nominal size Stone 44.55 1400.00 62370.00
2203 Aggregate (Single size) : 20 mm nominal size 89.10 163.93 14606.16
0059 Carriage of Stone aggregate 40 mm nominal size and above Carriage of 6.60 950.00 6270.00
0070 Stone aggregate below 40 mm nominal size Stone Aggregate (Single 6.00 300.00 1800.00
0057 size) : 25 mm nominal size 3.00 200.00 600.00
0052 Stone Aggregate (Single size) : 20 mm nominal size Crushed stone 2.36 6.00 1300.00 7800.00
0053 mm to 12.5 mm size 4950.00 3.30 16335.00
0065 Carriage of Stone aggregate below 40 mm nominal size Stone chippings/ 6.00 800.00 1633.50
0054 screenings 4.75 mm nominal size Stone chippings/ screenings 150 3.90 600.00 4800.00
0128 micron nominal size Carriage of Coarse sand 0.48 714.00 2340.00
0139 Machinery/ Hire charges: 2.00 714.00 342.72
0114 Wet Mix Plant 60 TPH @75 tonne capacity 10.00 645.00 1428.00
Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity 5 km lead 6450.00
with one trip per hour 471485.46
Front end loader 1 cum bucket capacity (incl POL) 4714.85
Tipper 10 tonne capacity( taking lead= 10 Km) =495x10 =4950 tonne km 476200.32
Tipper -5 Cum 66906.14
Add 10 per cent of cost of carriage to cover cost of loading and unloading 543106.46
Paver finisher Mechanical 100 TPH Vibratory roller 8 to 10 tonne 81465.97
LABOUR 624572.43
Mate 6245.72
Skilled Beldar (for floor rubbing etc.) Beldar 630818.16
TOTAL 2803.64
Add 1 % Water charges on "W" TOTAL 2803.65
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 225 cum(450 Tonne) Cost per cum.
Say

16.80 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS
size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per
specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction
strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical pave
compacting with 8-10 tonne
vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0294 Details of cost for 450 cum (990 tonne) MATERIAL cum cum cum 202.50 1350.00 273375.00
0296 Crushed stone coarse aggregate of 25mm & 12.5 mm nominal sizes tonne cum cum 202.50 1350.00 273375.00
0982 graded as per specifications @ 0.90 cum/cum of concrete conforming to tonne 203.00 1500.00 304500.00
0367 specification. = 405 cum Coarse Sand @0.45 m3 per cum of concrete = hour 67.50 5000.00 337500.00
2202 203 cum hour hour 405.00 163.93 66391.65
2203 Cement @150 Kg. per cum of concrete= 67.50 cum Qty for 0294,0296 hour hour hour 203.00 163.93 33277.79
2209 codes = 405 / 2 = 202.50 cum Stone Aggregate (Single size) : 25 mm tonne km 67.50 145.72 9836.10
0052 nominal size Stone Aggregate (Single size) : 12.5 mm nominal size day day day 6.00 1300.00 7800.00
0066 Coarse sand (zone III) 6.00 2400.00 14400.00
0069 Portland Cement (OPC-43 grade) 6.00 400.00 2400.00
0065 Carriage of Stone aggregate below 40 mm nominal size Carriage of 6.00 800.00 4800.00
0054 Coarse sand 8.00 600.00 4800.00
0057 Carriage of Cement Machinery/ Hire charges: 8.00 200.00 1600.00
0053 Front end loader 1 cum bucket capacity (incl POL) @75 tonne capacity 9900.00 3.30 32670.00
0128 Batching and Mixing Plant @ 75 cum per hour 1.12 714.00 3267.00
0139 Generator 250 KVA 6.00 714.00 799.68
0114 5 km lead with one trip per hour Paver finisher Mechanical 100 TPH 22.00 645.00 4284.00
Vibratory roller 8 to 10 tonne 14190.00
Water Tanker 5 to 6 KL capacity 1389266.22
Tipper 10 tonne capacity (Taken 10km average lead) 990x10=9900 tonne 13892.66
km 1403158.88
Tipper -5 Cum 197143.82
Add 10 per cent of cost of carriage to cover cost of loading and unloading 1600302.71
LABOUR 240045.41
Mate 1840348.11
Skilled Beldar (for floor rubbing etc.) Beldar 18403.48
TOTAL 1858751.59
Add 1 % Water charges on "W" TOTAL 4130.56
Add GST on "X" (multiplying factor 0.1405) TOTAL 4130.55
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z"
Cost for 450 cum(990 Tonne) Cost per cum.
Say

16.81
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iro
50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm
suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS ch
75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS ang
40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expans
fasteners at both ends. The work shall be executed as per drawing/direction of Engineer- in-Charge which includes writing and painting, arr
for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution
directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading fro
location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenan
damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be remove
prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading pro
remain to be the property of the contractor on
completion of the work).

Code Description Unit Quantity Rate Rs. Amount Rs.


16.81X Details of cost for 2.5 metre MATERIAL metre metre 2.50 46.05 115.13
16.81Y Rate as per Sub Analysis No.16.81X Rate as per Sub Analysis No.16.81Y sqm sqm 2.50 1452.40 3631.00
13.50.3 Rate as per Item No.13.50.3 of SH: FINISHING Rate as per Item 11.00 55.50 610.50
13.61.1 No.13.61.1 of SH: FINISHING TOTAL 11.00 131.45 1445.95
Add 1 % Water charges on "W-A" TOTAL 5802.58
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 37.46
Add 15% CPOH on "Y-A" TOTAL 5840.04
Add Cess @ 1% on "Z-A" Cost of 2.5 metre 531.59
Cost of 1 metre 6371.63
Say 647.28
7018.91
49.62
7068.53
2827.41
2827.40

16.81X Sub analysis item for material component of Item No. 16.81

Code Description Unit Quantity Rate Rs. Amount Rs.


1013 Sub analysis item no.16.81X to be used in Item No. 16.81 Details of cost quintal 0.672 4850.00 3259.20
1007 for 2.5 meter quintal 0.717 4950.00 3549.15
1007 MATERIAL quintal 0.0599 4950.00 296.51
M.S. Sheet 1.63mm thick = 1x2.50x2.00
= 5.00 sqm @ 12.80 kg/sqm = 64.00 kg
wastage @ 5%= 3.20 kg Total = 67.20 kg
Mild steel sheets for tanks MS Angle - 40 x 40 x 6 mm
Outframe=2x(2.50+2.00)=9.00 m Vertical extra = 2x0.300 = 0.60 m
Horizontal = 1x2.50 =2.50 m Bracing = 2x3.20 = 6.40 m
Bracing at bottom = 2x0.50 = 1.00 m
Total = 19.50 m @ 3.50 kg/m = 68.25 kg + wastage @ 5% = 3.14 kg
Total = 71.66 kg
Structurals such as tees,angles channels and R.S. joists
M.S. Channel = 2x0.50 =1.00 m @
5.70 kg/m = 5.70 kg+ wastage @ 5% = 0.29 kg Total = 5.99 kg
Structurals such as tees, angles channels and R.S. joists
M.S. Flat 30x5 mm Horizontal = 2x2.50 = 5.00 m Vertical = 2x2.00 = 4.00
m

1008 Total = 9.00 m @ 1.20 kg/m = 10.80 kg + wastage @ 5% = 0.54 kg quintal 0.1134 4850.00 549.99
2205 Total = 11.34 kg tonne 0.156 145.72 22.73
Flats upto 10 mm in thickness Carriage of Steel 7677.58
TOTAL 767.76
Add for maintenance @ 10% on P -3838.79
Less for salvage value of material @ 50% on P TOTAL 4606.55
Assuming that material will become unserviceable after using 40 times, 115.16
cost of 2.5 metre using once = S/40 46.07
Cost of 2.5 meter Cost of 1 meter 46.05
Say

16.81Y Sub analysis item for fabrication charges of Item No. 16.81
Code Description Unit Quantity Rate Rs. Amount Rs.
1215 Sub analysis item no.16.81Y to be used in Item No. 16.81 Details of cost cm 165.00 2.00 330.00
0102 for 2.5 metre day day day 0.115 784.00 90.16
0103 MATERIAL day L.S. 0.115 714.00 82.11
0100 Welding by electric plant day day day 0.11 714.00 78.54
0114 Cutting, assembling and erection charges LABOUR day day L.S. 0.83 645.00 535.35
9999 Blacksmith 1st class Blacksmith 2nd class Bandhani 12.10 2.12 25.65
0116 Beldar Sundries 0.41 784.00 321.44
0103 Labour for riveting / bolting / cutting etc. Fitter (grade 1) 0.54 714.00 385.56
0100 Blacksmith 2nd class Bandhani 0.70 714.00 499.80
0114 Beldar 0.54 645.00 348.30
0139 Skilled Beldar (for floor rubbing etc.) Sundries 0.81 714.00 578.34
9999 TOTAL 12.10 2.12 25.65
Shifting including transportation, re-erection etc. @ 10% TOTAL Cost of 3300.90
2.5 meter 330.09
Cost of 1 meter 3630.99
Say 1452.40
1452.40

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unservi
16.82 material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 m
per direction of Engineer-in-
Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Details of cost for 100 meter LABOUR day day L.S. 0.75 645.00 483.75
0115 Beldar Coolie Sundries TOTAL 3.00 645.00 1935.00
9999 Add 1 % Water charges on "W" TOTAL 2.00 2.12 4.24
Add GST on "X" (multiplying factor 0.1405) TOTAL 2422.99
Add 15% CPOH on "Y" TOTAL 24.23
Add Cess @ 1% on "Z" Cost of 100 meter 2447.22
Cost of 1 meter 343.83
Say 2791.05
418.66
3209.71
32.10
3241.81
32.42
32.40

16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of un
material to the dumping ground, for which payment shall be
made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-
Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0114 Details of cost for 10 sqm. LABOUR day day L.S. 0.25 645.00 161.25
0115 Beldar Coolie Sundries TOTAL 1.00 645.00 645.00
9999 Add 1 % Water charges on "W" TOTAL 2.70 2.12 5.72
Add GST on "X" (multiplying factor 0.1405) TOTAL 811.97
Add 15% CPOH on "Y" TOTAL 8.12
Add Cess @ 1% on "Z" Cost of 10 sqm. 820.09
Cost of 1 sqm 115.22
Say 935.32
140.30
1075.61
10.76
1086.37
108.64
108.65
Say 935.32
140.30
1075.61
10.76
1086.37
108.64
108.65

16.84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and patt
and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-
(Old CC paver blocks
shall be supplied by the department free of cost).

Code Description Unit Quantity Rate Rs. Amount Rs.


0982 Details of cost for 10 sqm. MATERIAL cum 0.50 1500.00 750.00
2203 Bedding layer 50mm thick Coarse sand (zone III) cum cum 0.50 163.93 81.97
0983 Qty = 10 x 0.05 = 0.50 cum Carriage of Coarse sand Fine sand (zone IV) cum 0.15 900.00 135.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.15 163.93 24.59
0123 LABOUR day 0.50 784.00 392.00
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.50 714.00 357.00
0114 Coolie TOTAL 1.00 645.00 645.00
0115 Add 1 % Water charges on "W" TOTAL 0.50 645.00 322.50
Add GST on "X" (multiplying factor 0.1405) TOTAL 2708.05
Add 15% CPOH on "Y" TOTAL 27.08
Add Cess @ 1% on "Z" Cost of 10 sqm. 2735.14
Cost of 1 sqm 384.29
Say 3119.42
467.91
3587.33
35.87
3623.21
362.32
362.30

16.85 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cem
1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be mor
mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb e
be measured for payment). (Old kerb stones shall be supplied by
the department free of cost)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 meter. MATERIAL
Number of kerb stones = 100 / 0.405= 247 Nos. Qty. = 247 x 0.40 x 0.375
x 0.20 = 7.41cum
No. of joints = 247 - 1 = 246 Nos.
Cement Mortar 1:3 for fixing joints = 246 x[(0.115 + 0.20)/2 x 0.375 x
0.005] = 0.073 cum
Rate as per Item No.3.8 of SH:MORTARS LABOUR 366.76
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 1960.00
Coolie TOTAL 1785.00
Add 1 % Water charges on "W" TOTAL 1612.50
Add GST on "X" (multiplying factor 0.1405) TOTAL 1064.25
Add 15% CPOH on "Y" TOTAL 6788.51
3.8 0.073 5024.15
Add Cess @ 1% on "Z" Cost of 100 meter. 67.89
0123 cum 2.50 784.00
Cost of 1 meter. 6856.40
0124 day day day 2.50 714.00
Say 963.32
0114 day 2.50 645.00
7819.72
0115 1.65 645.00
1172.96
8992.68
89.93
9082.61
90.83
90.85
16.86 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of re
and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colo
texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse s
including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-i
16.86.1 With granite stone of area less than 0.50 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


7295 Detail of cost for 0.5sqm. sqm cum 0.525 1800.00 945.00
3.9 Mirror polished granite 0.5 sqm. day day day 0.012 4355.20 52.26
0123 Waste @5% = 0.025 +0.5 = 0.525 sqm. L.S. 0.56 784.00 439.04
0114 Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) 0.05 645.00 32.25
0115 Rate as per Item No.3.9 of SH: MORTARS LABOUR : 0.05 645.00 32.25
9999 Mason (brick layer) 1st class Beldar 17.60 2.12 37.31
Coolie Sundries TOTAL 1538.11
Add 1 % Water charges on "W" TOTAL 15.38
Add GST on "X" (multiplying factor 0.1405) TOTAL 1553.50
Add 15% CPOH on "Y" TOTAL 218.27
Add Cess @ 1% on "Z" Cost of 0.5 sqm 1771.76
Cost per sqm. 265.76
Say 2037.53
20.38
2057.90
4115.80
4115.80

16.87 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of re
and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base o
mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. c
per direction of Engineer-in-Charge.
16.87.1 With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


7296 Details of cost for 0.50 sqm MATERIAL sqm cum 0.53 1900.00 997.50
3.9 Mirror polished granite 0.50 sqm + Waste @5% total = 0.025. Total = day day day 0.012 4355.20 52.26
0123 0.525 sqm L.S. 0.56 784.00 439.04
0114 Granite stone slab of colour Black, Cherry/Ruby Red 30mm thick (slab 0.05 645.00 32.25
0115 area less than 0.5 sqm) 0.05 645.00 32.25
9999 Rate as per Item No.3.9 of SH: MORTARS LABOUR : 17.60 2.12 37.31
Mason (brick layer) 1st class Beldar 1590.61
Coolie Sundries TOTAL 15.91
Add 1 % Water charges on "W" TOTAL 1606.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 225.72
Add 15% CPOH on "Y" TOTAL 1832.24
Add Cess @ 1% on "Z" Cost of 0.5 sqm 274.84
Cost of 1 sqm 2107.07
Say 21.07
2128.14
4256.29
4256.30

16.87.2 With granite stone of all colour except black, cherry/ruby red of area less than 0.50 sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


7300 Details of cost for 0.50 sqm sqm cum 0.53 2100.00 1102.50
3.9 MATERIAL day day 0.012 4355.20 52.26
0123 Mirror polished granite 0.50 sqm + Waste @5% total = 0.025. Total = day L.S. 0.56 784.00 439.04
0114 0.525 sqm 0.05 645.00 32.25
0115 Granite stone slab of all colour except Black, Cherry/Ruby Red 30mm 0.05 645.00 32.25
9999 thick (slab area less than 0.5 sqm) 17.60 2.12 37.31
Rate as per Item No.3.9 of SH: MORTARS LABOUR : 1695.61
Mason (brick layer) 1st class Beldar 16.96
Coolie Sundries TOTAL 1712.57
Add 1 % Water charges on "W" TOTAL 240.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 1953.19
Add 15% CPOH on "Y" TOTAL 292.98
Add Cess @ 1% on "Z" Cost of 0.5 sqm 2246.16
Cost of 1 sqm 22.46
Say 2268.63
4537.25
4537.25

16.88 Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming
of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of ce
mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching
pigments etc. complete as direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7895 Detail of cost for 1 sqm. MATERIAL sqm L.S. 1.00 910.00 910.00
9977 Matt finished vitrified tile 100x100 x16mm Matt finished vitrified tile cum L.S. 6.24 2.12 13.23
3.9 100x100 x16mm Carriage tonne 0.024 4355.20 104.52
9999 Rate as per Item No.3.9 of SH: MORTARS Sundries day day L.S. 3.64 2.12 7.72
0367 Portland Cement (OPC-43 grade) LABOUR : 0.0033 5000.00 16.50
0123 Mason (brick layer) 1st class Coolie 0.20 784.00 156.80
0115 Sundries TOTAL 0.20 645.00 129.00
9999 Add 1 % Water charges on "W" TOTAL 26.91 2.12 57.05
Add GST on "X" (multiplying factor 0.1405) TOTAL 1394.82
Add 15% CPOH on "Y" TOTAL 13.95
Add Cess @ 1% on "Z" Cost per sqm. 1408.77
Say 197.93
1606.70
241.00
1847.70
18.48
1866.18
1866.20

16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conform
15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20m
base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed
with matching pigments etc. complete as per direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7896 Detail of cost for 1 sqm. MATERIAL sqm L.S. 1.00 450.00 450.00
9977 Tile 300x300 x9.8mm = 1.00 sqm. Vitrified tile cum L.S. 6.24 2.12 13.23
3.9 Carriage tonne 0.024 4355.20 104.52
9999 Rate as per Item No.3.9 of SH: MORTARS Sundries day day L.S. 3.64 2.12 7.72
0367 Portland Cement (OPC-43 grade) LABOUR : 0.0033 5000.00 16.50
0123 Mason (brick layer) 1st class Coolie 0.20 784.00 156.80
0115 Sundries TOTAL 0.20 645.00 129.00
9999 Add 1 % Water charges on "W" TOTAL 26.91 2.12 57.05
Add GST on "X" (multiplying factor 0.1405) TOTAL 934.82
Add 15% CPOH on "Y" TOTAL 9.35
Add Cess @ 1% on "Z" Rate per sqm. 944.17
Say 132.66
1076.82
161.52
1238.35
12.38
1250.73
1250.75

16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorp
than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi
location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joint
cement mixed with matching pigments etc. complete as per direction of Engineer-in-
Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7893 Detail of cost for 1 sqm. MATERIAL: sqm L.S. 1.00 800.00 800.00
9977 Tile 300x300 x9.8mm = 1.00 sqm. Tactile tile cum L.S. 6.24 2.12 13.23
3.9 Carriage tonne 0.024 4355.20 104.52
9999 Rate as per Item No.3.9 of SH: MORTARS Sundries day day L.S. 3.64 2.12 7.72
0367 Portland Cement (OPC-43 grade) LABOUR : 0.0033 5000.00 16.50
0123 Mason (brick layer) 1st class Coolie 0.20 784.00 156.80
0115 Sundries TOTAL 0.20 645.00 129.00
9999 Add 1 % Water charges on "W" TOTAL 26.91 2.12 57.05
Add GST on "X" (multiplying factor 0.1405) TOTAL 1284.82
Add 15% CPOH on "Y" TOTAL 12.85
Add Cess @ 1% on "Z" Cosr per sqm 1297.67
Say 182.32
1479.99
222.00
1701.99
17.02
1719.01
1719.00

16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or ligh
parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern
thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through v
compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sw
extra sand. complete all as per direction of Engineer-in-Charge.
16.91.1 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Code Description Unit Quantity Rate Rs. Amount Rs.


7773 Details of cost for 10 sqm. MATERIAL : sqm cum cum 10.00 425.00 4250.00
0982 Coloured inter locking C.C. paver Block Coarse sand (zone-III) cum 0.50 1500.00 750.00
2203 Carriage of coarse sand Fine sand (zone IV) cum 0.50 163.93 81.97
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.11 900.00 99.00
2261 LABOUR day L.S. 0.11 163.93 18.03
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.50 784.00 392.00
0124 Coolie Sundries TOTAL 0.50 714.00 357.00
0114 Add 1 % Water charges on "W" TOTAL 1.00 645.00 645.00
0115 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.50 645.00 322.50
9999 Add 15% CPOH on "Y" TOTAL 25.00 2.12 53.00
Add Cess @ 1% on "Z" Cost of 10 Sqm 6968.50
Cost of 1 Sqm 69.68
Say 7038.18
988.86
8027.05
1204.06
9231.10
92.31
9323.41
932.34
932.35

16.91.2 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Code Description Unit Quantity Rate Rs. Amount Rs.


8785 Details of cost for 10.00 sqm. MATERIALS : sqm cum cum 10.00 485.00 4850.00
0982 Interlocking C.C. paver block (80 mm thick, M-30) Coarse sand (zone cum cum 0.50 1500.00 750.00
2203 111) (10 x 0.050 = 0.50 cum ) Carriage of Coarse sand day day day 0.50 163.93 81.97
0983 Fine sand (zone IV) Carriage of Fine sand Labour for Laying day 0.15 900.00 135.00
2261 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.15 163.93 24.59
0123 Coolie TOTAL 0.50 784.00 392.00
0124 Add 1 % Water charges on "W" TOTAL 0.50 714.00 357.00
0114 Add GST on "X" (multiplying factor 0.1405) TOTAL 1.00 645.00 645.00
0115 Add 15% CPOH on "Y" TOTAL 0.50 645.00 322.50
Add Cess @ 1% on "Z" Cost of 10 Sqm 7558.05
Cost of 1 Sqm 75.58
Say 7633.64
1072.53
8706.16
1305.92
10012.08
100.12
10112.21
1011.22
1011.20

16.92 Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. lai
20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete
direction of engineer-in- charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7774 Details of cost for 10.00 sqm. MATERIALS : each cum 827.00 9.00 7443.00
3.9 Stone size 10x10x7.50cm =1sqm Stone size 10x10x7.50cm tonne 0.434 4355.20 1890.16
0367 Rate as per Item No.3.9 of SH: MORTARS Portland Cement (OPC-43 day day day 0.02 5000.00 100.00
0124 grade) LABOUR : day 1.08 714.00 771.12
0114 Mason (brick layer) 2nd class Beldar sqm 0.25 645.00 161.25
0115 Coolie Bhisti 1.62 645.00 1044.90
0101 Rate as per Item No.13.33.1 of SH: FINISHING 0.27 714.00 192.78
13.33.1 TOTAL 10.00 319.35 3193.50
Add 1 % Water charges on "W-A" TOTAL 14796.71
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 116.03
Add 15% CPOH on "Y-A" TOTAL 14912.74
Add Cess @ 1% on "Z-A" Cost of 10 sqm. 1646.55
Cost of 1 sqm. 16559.29
Say 2004.87
18564.16
153.71
18717.87
1871.79
1871.80
13.33.1 TOTAL 10.00 319.35 3193.50
Add 1 % Water charges on "W-A" TOTAL 14796.71
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 116.03
Add 15% CPOH on "Y-A" TOTAL 14912.74
Add Cess @ 1% on "Z-A" Cost of 10 sqm. 1646.55
Cost of 1 sqm. 16559.29
Say 2004.87
18564.16
153.71
18717.87
1871.79
1871.80

16.93 Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Cov
drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8
TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges w
thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 m
for hooks etc i/c cost of cartage, all
leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.1.1 Details of cost of 1 No of size 1.50 x cum 0.06 7997.30 479.84
5.22.6 0.40 = 0.60 sqm MATERIALS : Kg cm 4.59 89.65 411.49
10.22 Precast RCC M-25 quintal sqm 82.00 3.40 278.80
1013 Rate as per Item No.5.33.1.1 of SH: REINFORCED CEMENT sqm 0.0477 4850.00 231.35
13.61.1 CONCRETE 0.38 131.45 49.95
13.18 Reinforcement TMT 0.60 67.80 40.68
Rate as per Item No.5.22.6 of SH: REINFORCED CEMENT CONCRETE 1492.11
Welding by gas plant/ Electric plant 2.31
Rate as per Item No.10.22 of SH: STEEL WORK 1494.42
M.S. sheet 1.60 mm thick 2x(1.50+0.40)x0.10x0.016x7850=4.77kg Mild 32.83
steel sheets for tanks 1527.25
Paint 2x(1.50+0.40)x0.10=0.38sqm 39.97
Rate as per Item No.13.61.1 of SH: FINISHING Neat Cement Punning 1567.22
1x1.50x0.40=0.60 sqm 3.06
Rate as per Item No.13.18 of SH: FINISHING TOTAL 1570.29
Add 1 % Water charges on "W-A" TOTAL 2617.15
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 2617.15
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 0.60 sqm.
Cost of 1 sqm.
Say

16.94 Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes a
16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0
mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perp
to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 20
per drawing, all
complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8576 Details cost of one Gabion box/Crates of size 2mx1mx1m = 2 cum sqm 11.00 200.00 2200.00
7753 MATERIAL cum cum 2.00 810.00 1620.00
2206 Crates made of Mesh type 10x12 (D=100 mm) Zn coated. (Mesh wire day day day 2.00 178.19 356.38
0128 diameter 3.00 mm). 0.10 714.00 71.40
0125 Surface area required = 11.00 sqm. 0.50 714.00 357.00
0114 Stone boulder with least dimension 200mm Carriage of boulder 1.50 645.00 967.50
LABOUR 5572.28
Mate 55.72
Mason (for plain stone work) 2nd class Beldar 5628.00
TOTAL 790.73
Add 1 % Water charges on "W" TOTAL 6418.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 962.81
Add 15% CPOH on "Y" TOTAL 7381.55
Add Cess @ 1% on "Z" Cost of 2 cum 73.82
Cost of 1 cum 7455.36
Say 3727.68
3727.70

16.95 Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes a
16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC coated, Mesh wire
diameter2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings pe
mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boul
least dimension of 200 mm, as per drawing, all
complete as per directions of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8577 Details cost of one Gabion box/Crates of size 2mx1mx1m = 2 cum sqm cum 11.00 250.00 2750.00
7753 MATERIAL day day day 2.00 810.00 1620.00
0128 Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh 0.10 714.00 71.40
0125 wire diameter 2.70/3.70 mm (ID/OD). 0.50 714.00 357.00
0114 Surface area required = 11.00 sqm. 1.50 645.00 967.50
Stone boulder with least dimension 200mm LABOUR 5765.90
Mate 57.66
Mason (for plain stone work) 2nd class Beldar 5823.56
TOTAL 818.21
Add 1 % Water charges on "W" TOTAL 6641.77
Add GST on "X" (multiplying factor 0.1405) TOTAL 996.27
Add 15% CPOH on "Y" TOTAL 7638.03
Add Cess @ 1% on "Z" Cost of 2 cum 76.38
Cost of 1 cum 7714.41
Say 3857.21
3857.20

16.96 Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes a
16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mes
diameter 2.7/3.7mm (ID/OD), mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of ope
meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled
boulders with least dimension of
200 mm, as per drawing, all complete as per directions of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8578 Details cost of one Gabion box/Crates of size 2mx1mx1m = 2 cum sqm cum 11.00 290.00 3190.00
7753 MATERIAL day day day 2.00 810.00 1620.00
0128 Crates made of Mesh type 10x12 (D=100 mm) Zn+10% Al alloy 0.10 714.00 71.40
0125 + PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD). 0.50 714.00 357.00
0114 Surface area required = 11.00 sqm. 1.50 645.00 967.50
Stone boulder with least dimension 200mm LABOUR 6205.90
Mate 62.06
Mason (for plain stone work) 2nd class Beldar 6267.96
TOTAL 880.65
Add 1 % Water charges on "W" TOTAL 7148.61
Add GST on "X" (multiplying factor 0.1405) TOTAL 1072.29
Add 15% CPOH on "Y" TOTAL 8220.90
Add Cess @ 1% on "Z" Cost of 2 cum 82.21
Cost of 1 cum 8303.11
Say 4151.55
4151.55

SUB HEAD : 17.0


SANITARY INSTALLATIONS
1011
SUB HEAD : 17.0
SANITARY INSTALLATIONS
1011

17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S
trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with a
fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pan
MATERIAL
1954 Vitreous china orrisa type w.c. pan size 580 mm each 1.00 1290.00 1290.00
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with
fittings, accessories and flush pipe) each 1.00 575.00 575.00
1896 100 mm S.C.I. trap with vent heel each 1.00 325.00 325.00
9999 Cement, sand and grit etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 26.91 2.12 57.05
LABOUR
0116 Fitter (grade 1) day 1.25 784.00 980.00
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 1.00 645.00 645.00
TOTAL 4321.10
Add 1 % Water charges on "W" 43.21
TOTAL 4364.31
Add GST on "X" (multiplying factor 0.1405) 613.19
TOTAL 4977.49
Add 15% CPOH on "Y" 746.62
TOTAL 5724.12
Add Cess @ 1% on "Z" 57.24
Cost of each 5781.36
Say 5781.35

17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pan
MATERIAL
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
724mm X 578mm each 1.00 4500.00 4500.00
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with
fittings, accessories and flush pipe) each 1.00 575.00 575.00
1896 100 mm S.C.I. trap with vent heel each 1.00 325.00 325.00
9999 Cement, sand and grit etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 26.91 2.12 57.05
LABOUR
0116 Fitter (grade 1) day 1.25 784.00 980.00
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 1.00 645.00 645.00
TOTAL 7531.10
Add 1 % Water charges on "W" 75.31
TOTAL 7606.41
Add GST on "X" (multiplying factor 0.1405) 1068.70
TOTAL 8675.11
Add 15% CPOH on "Y" 1301.27
TOTAL 9976.38
Add Cess @ 1% on "Z" 99.76
Cost of each 10076.14
Say 10076.15
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P
flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete,
including cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pan
MATERIAL

1875 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each each 1.00 410.00 410.00
1955 Vitreous china pedestal type water closet each L.S. 1.00 1025.00 1025.00
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with fittings, L.S. 1.00 575.00 575.00
9999 accessories and flush pipe) day day day 26.91 2.12 57.05
9977 Cement, sand and grit etc. Carriage of materials LABOUR 26.91 2.12 57.05
0116 Fitter (grade 1) 1.25 784.00 980.00
0123 Mason (brick layer) 1st class Beldar 0.50 784.00 392.00
0114 TOTAL 1.00 645.00 645.00
Add 1 % Water charges on "W" TOTAL 4141.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 41.41
Add 15% CPOH on "Y" TOTAL 4182.51
Add Cess @ 1% on "Z" Cost of each 587.64
Say 4770.15
715.52
5485.67
54.86
5540.53
5540.55

17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
Code Description Unit Quantity Rate Rs. Amount Rs.
1876 Details of cost for one pan MATERIAL each each 1.00 325.00 325.00
1955 Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers each L.S. 1.00 1025.00 1025.00
7358 Vitreous china pedestal type water closet L.S. 1.00 575.00 575.00
9999 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with fittings, day day day 26.91 2.12 57.05
9977 accessories and flush pipe) 26.91 2.12 57.05
0116 Cement, sand and grit etc. Carriage of materials LABOUR 1.25 784.00 980.00
0123 Fitter (grade 1) 0.50 784.00 392.00
0114 Mason (brick layer) 1st class Beldar 1.00 645.00 645.00
TOTAL 4056.10
Add 1 % Water charges on "W" TOTAL 40.56
Add GST on "X" (multiplying factor 0.1405) TOTAL 4096.66
Add 15% CPOH on "Y" TOTAL 575.58
Add Cess @ 1% on "Z" Cost of each 4672.24
Say 700.84
5373.08
53.73
5426.81
5426.80

17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous ch
flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquit
proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors whe
required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Code Description Unit Quantity Rate Rs. Amount Rs.


1875 Details of cost for one pan MATERIAL each each 1.00 410.00 410.00
1955 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each L.S. 1.00 1025.00 1025.00
7006 Vitreous china pedestal type water closet each L.S. 1.00 1200.00 1200.00
9999 Vitreous china 10 litres low level cistern with fittings Overflow arrangement L.S. 62.79 2.12 133.11
1350 and specials for oveflow pipe Mosquito proof coupling of approved design L.S. 1.00 30.00 30.00
9999 Plugs ,screws etc. L.S. 13.52 2.12 28.66
9999 Red lead, white lead and gaskit Cement, sand and grit etc. day day day 16.12 2.12 34.17
9999 Carriage of materials LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 26.91 2.12 57.05
0116 Mason (brick layer) 1st class Beldar 1.00 784.00 784.00
0123 TOTAL 1.00 784.00 784.00
0114 Add 1 % Water charges on "W" TOTAL 1.00 645.00 645.00
5188.05
51.88
5239.93

Add GST on "X" (multiplying factor 0.1405) TOTAL 736.21


Add 15% CPOH on "Y" TOTAL 5976.14
Add Cess @ 1% on "Z" Cost of each 896.42
Say 6872.56
68.73
6941.29
6941.30

17.3.2 W.C. pan with ISI marked black solid plastic seat and lid

Code Description Unit Quantity Rate Rs. Amount Rs.


1876 Details of cost for one pan MATERIAL each each 1.00 325.00 325.00
1955 Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers each L.S. 1.00 1025.00 1025.00
7006 Vitreous china pedestal type water closet each L.S. 1.00 1200.00 1200.00
9999 Vitreous china 10 litres low level cistern with fittings Overflow arrangement L.S. 62.79 2.12 133.11
1350 and specials for oveflow pipe Mosquito proof coupling of approved design L.S. 1.00 30.00 30.00
9999 Plugs, screws etc. L.S. 13.52 2.12 28.66
9999 Red lead, white lead and gaskit Cement, sand and grit etc. day day day 16.12 2.12 34.17
9999 Carriage of materials LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 26.91 2.12 57.05
0116 Mason (brick layer) 1st class Beldar 1.00 784.00 784.00
0123 TOTAL 1.00 784.00 784.00
0114 Add 1 % Water charges on "W" TOTAL 1.00 645.00 645.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 5103.05
Add 15% CPOH on "Y" TOTAL 51.03
Add Cess @ 1% on "Z" Cost of each 5154.08
Say 724.15
5878.23
881.73
6759.96
67.60
6827.56
6827.55

17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and making good the walls and floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


1913 Details of cost for one no. MATERIAL each each 1.00 470.00 470.00
7359 Vitreous china lipped front urinal each L.S. 1.00 450.00 450.00
7375 P.V.C. automatic flushing cistern 5 lts capacity L.S. 1.00 445.00 445.00
9999 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe L.S. 13.52 2.12 28.66
9999 Single lipped urinal L.S. 13.52 2.12 28.66
9999 Red lead, white lead and gaskit Plugs ,screws etc. L.S. 13.52 2.12 28.66
9999 Cement, sand and grit etc. Painting of fittings etc. day day day 39.00 2.12 82.68
9977 Carriage of materials LABOUR 26.91 2.12 57.05
0116 Fitter (grade 1) 0.88 784.00 689.92
0123 Mason (brick layer) 1st class Beldar 0.88 784.00 689.92
0114 TOTAL 1.50 645.00 967.50
Add 1 % Water charges on "W" TOTAL 3938.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 39.38
Add 15% CPOH on "Y" TOTAL 3977.44
Add Cess @ 1% on "Z" Cost of each 558.83
Say 4536.27
680.44
5216.71
52.17
5268.87
5268.85

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


1913 Details of cost for one no. MATERIAL each each 2.00 470.00 940.00
7359 Vitreous china lipped front urinal each L.S. 1.00 450.00 450.00
7376 P.V.C. automatic flushing cistern 5 lts capacity L.S. 1.00 765.00 765.00
9999 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe L.S. 20.28 2.12 42.99
9999 Range of two lipped urinals L.S. 20.28 2.12 42.99
9999 Red lead, white lead and gaskit Plugs ,screws etc. L.S. 20.28 2.12 42.99
9999 Cement, sand and grit etc. Painting of fittings etc. day day day 39.00 2.12 82.68
9977 Carriage of materials LABOUR 26.91 2.12 57.05
0116 Fitter (grade 1) 1.50 784.00 1176.00
0123 Mason (brick layer) 1st class Beldar 1.50 784.00 1176.00
0114 TOTAL 2.00 645.00 1290.00
Add 1 % Water charges on "W" TOTAL 6065.71
Add GST on "X" (multiplying factor 0.1405) TOTAL 60.66
Add 15% CPOH on "Y" TOTAL 6126.37
Add Cess @ 1% on "Z" Cost of each 860.75
Say 6987.12
1048.07
8035.19
80.35
8115.54
8115.55

17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


1913 Details of cost for one no. MATERIAL each each 3.00 470.00 1410.00
7361 Vitreous china lipped front urinal each L.S. 1.00 500.00 500.00
7377 P.V.C. automatic flushing cistern 10 lts capacity L.S. 1.00 1050.00 1050.00
9999 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe L.S. 33.67 2.12 71.38
9999 Range of three lipped urinals L.S. 33.67 2.12 71.38
9999 Red lead, white lead and gaskit Plugs ,screws etc. L.S. 33.67 2.12 71.38
9999 Cement, sand and grit etc. Painting of fittings etc. day day day 39.00 2.12 82.68
9977 Carriage of materials LABOUR 40.30 2.12 85.44
0116 Fitter (grade 1) 2.00 784.00 1568.00
0123 Mason (brick layer) 1st class Beldar 2.00 784.00 1568.00
0114 TOTAL 3.00 645.00 1935.00
Add 1 % Water charges on "W" TOTAL 8413.26
Add GST on "X" (multiplying factor 0.1405) TOTAL 84.13
Add 15% CPOH on "Y" TOTAL 8497.39
Add Cess @ 1% on "Z" Cost of each 1193.88
Say 9691.27
1453.69
11144.96
111.45
11256.41
11256.40

17.4.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
Code Description Unit Quantity Rate Rs. Amount Rs.
1913 Details of cost for one no. MATERIAL each each 4.00 470.00 1880.00
7361 Vitreous china lipped front urinal each L.S. 1.00 500.00 500.00
7378 P.V.C. automatic flushing cistern 10 lts capacity L.S. 1.00 1430.00 1430.00
9999 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe L.S. 53.82 2.12 114.10
9999 Range of four lipped urinals L.S. 53.82 2.12 114.10
9999 Red lead, white lead and gaskit Plugs ,screws etc. L.S. 53.82 2.12 114.10
9999 Cement, sand and grit etc. Painting of fittings etc. day day day 39.00 2.12 82.68
9977 Carriage of materials LABOUR 53.82 2.12 114.10
0116 Fitter (grade 1) 3.00 784.00 2352.00
0123 Mason (brick layer) 1st class Beldar 3.00 784.00 2352.00
0114 TOTAL 4.00 645.00 2580.00
Add 1 % Water charges on "W" TOTAL 11633.07
Add GST on "X" (multiplying factor 0.1405) TOTAL 116.33
Add 15% CPOH on "Y" TOTAL 11749.40
Add Cess @ 1% on "Z" Cost of each 1650.79
Say 13400.20
2010.03
15410.22
154.10
15564.33
15564.35

17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, wi
fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outle
grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


7379 Details of cost for one no. MATERIAL each each 1.00 865.00 865.00
7359 White vitreous china clay half stall urinal flat back 580x380x350 mm or each 1.00 450.00 450.00
1532 angle back 450x375x350 mm with waste fittings as per IS each L.S. 1.00 310.00 310.00
1891 : 2556 L.S. 1.00 190.00 190.00
9999 P.V.C. automatic flushing cistern 5 lts capacity L.S. 17.55 2.12 37.21
9999 Flush pipe with union spreaders and clamps all in C.P. brass for single L.S. 26.91 2.12 57.05
9999 stall day day day 26.00 2.12 55.12
9977 C.I. trap for standard urinal with vent arm with operating and other 40.43 2.12 85.71
0116 couplings in C.P.brass: 50 mm dia 1.75 784.00 1372.00
0123 Red lead, white lead and gaskit Cement, sand and grit etc. 2.00 784.00 1568.00
0114 Painting of fittings etc. Carriage of materials LABOUR 4.00 645.00 2580.00
Fitter (grade 1) 7570.09
Mason (brick layer) 1st class Beldar 75.70
TOTAL 7645.79
Add 1 % Water charges on "W" TOTAL 1074.23
Add GST on "X" (multiplying factor 0.1405) TOTAL 8720.02
Add 15% CPOH on "Y" TOTAL 1308.00
Add Cess @ 1% on "Z" Cost of each 10028.02
Say 100.28
10128.30
10128.30

17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
Code Description Unit Quantity Rate Rs. Amount Rs.
7379 Details of cost for one no. MATERIAL each each 2.00 865.00 1730.00
7359 White vitreous china clay half stall urinal flat back 580x380x350 mm or each 1.00 450.00 450.00
1533 angle back 450x375x350 mm with waste fittings as per IS each L.S. 1.00 425.00 425.00
1891 : 2556 L.S. 1.00 190.00 190.00
9999 P.V.C. automatic flushing cistern 5 lts capacity L.S. 17.55 2.12 37.21
9999 Flush pipe with union spreaders and clamps all in C.P. brass for double L.S. 53.82 2.12 114.10
9999 stall day day day 26.00 2.12 55.12
9977 C.I. trap for standard urinal with vent arm with operating and other 53.82 2.12 114.10
0116 couplings in C.P.brass: 50 mm dia 2.50 784.00 1960.00
0123 Red lead, white lead and gaskit Cement, sand and grit etc. 3.00 784.00 2352.00
0114 Painting of fittings etc. Carriage of materials LABOUR 6.00 645.00 3870.00
Fitter (grade 1) 11297.52
Mason (brick layer) 1st class Beldar 112.98
TOTAL 11410.50
Add 1 % Water charges on "W" TOTAL 1603.17
Add GST on "X" (multiplying factor 0.1405) TOTAL 13013.67
Add 15% CPOH on "Y" TOTAL 1952.05
Add Cess @ 1% on "Z" Cost of each 14965.72
Say 149.66
15115.38
15115.40

17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


7379 Details of cost for one no. MATERIAL each each 3.00 865.00 2595.00
7361 White vitreous china clay half stall urinal flat back 580x380x350 mm or each 1.00 500.00 500.00
1534 angle back 450x375x350 mm with waste fittings as per IS each L.S. 1.00 525.00 525.00
1893 : 2556 L.S. 1.00 225.00 225.00
9999 P.V.C. automatic flushing cistern 10 lts capacity L.S. 17.55 2.12 37.21
9999 Flush pipe with union spreaders and clamps all in C.P. brass for range of L.S. 80.73 2.12 171.15
9999 three stall day day day 26.00 2.12 55.12
9977 C.I. trap for standard urinal with vent arm with operating and other 67.21 2.12 142.49
0116 couplings in C.P.brass: 80 mm dia 3.00 784.00 2352.00
0123 Red lead, white lead and gaskit Cement, sand and grit etc. 3.50 784.00 2744.00
0114 Painting of fittings etc. Carriage of materials LABOUR 7.00 645.00 4515.00
Fitter (grade 1) 13861.96
Mason (brick layer) 1st class Beldar 138.62
TOTAL 14000.58
Add 1 % Water charges on "W" TOTAL 1967.08
Add GST on "X" (multiplying factor 0.1405) TOTAL 15967.66
Add 15% CPOH on "Y" TOTAL 2395.15
Add Cess @ 1% on "Z" Cost of each 18362.81
Say 183.63
18546.44
18546.45

17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern
Code Description Unit Quantity Rate Rs. Amount Rs.
7379 Details of cost for one no. MATERIAL each each 4.00 865.00 3460.00
7361 White vitreous china clay half stall urinal flat back 580x380x350 mm or each 1.00 500.00 500.00
1535 angle back 450x375x350 mm with waste fittings as per IS each L.S. 1.00 610.00 610.00
1893 : 2556 L.S. 1.00 225.00 225.00
9999 P.V.C. automatic flushing cistern 10 lts capacity L.S. 17.55 2.12 37.21
9999 Flush pipe with union spreaders and clamps all in C.P. brass for range of L.S. 107.64 2.12 228.20
9999 four stall day day day 39.00 2.12 82.68
9977 C.I. trap for standard urinal with vent arm with operating and other 80.73 2.12 171.15
0116 couplings in C.P.brass: 80 mm dia 3.50 784.00 2744.00
0123 Red lead, white lead and gaskit Cement, sand and grit etc. 4.00 784.00 3136.00
0114 Painting of fittings etc. Carriage of materials LABOUR 8.00 645.00 5160.00
Fitter (grade 1) 16354.23
Mason (brick layer) 1st class Beldar 163.54
TOTAL 16517.77
Add 1 % Water charges on "W" TOTAL 2320.75
Add GST on "X" (multiplying factor 0.1405) TOTAL 18838.52
Add 15% CPOH on "Y" TOTAL 2825.78
Add Cess @ 1% on "Z" Cost of each 21664.30
Say 216.64
21880.94
21880.95

17.6 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clam
and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


1915 Details of cost for one no. MATERIAL each each 1.00 1053.00 1053.00
7359 Vitreous china squatting plate urinal each L.S. 1.00 450.00 450.00
1540 P.V.C. automatic flushing cistern 5 lts capacity L.S. 1.00 190.00 190.00
9999 Flush pipe and spreaders G.I.for single set of one squatting plate urinal L.S. 17.55 2.12 37.21
9999 Red lead, white lead and gaskit Cement, sand and grit etc. L.S. 26.91 2.12 57.05
9999 Painting of fittings etc. Carriage of materials LABOUR day day day 26.00 2.12 55.12
9977 Fitter (grade 1) 26.91 2.12 57.05
0116 Mason (brick layer) 1st class Beldar 1.75 784.00 1372.00
0123 TOTAL 0.75 784.00 588.00
0114 Add 1 % Water charges on "W" TOTAL 3.00 645.00 1935.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 5794.42
Add 15% CPOH on "Y" TOTAL 57.94
Add Cess @ 1% on "Z" Cost of each 5852.37
Say 822.26
6674.63
1001.19
7675.82
76.76
7752.58
7752.60

17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern
Code Description Unit Quantity Rate Rs. Amount Rs.
1915 Details of cost for one no. MATERIAL each each 2.00 1053.00 2106.00
7359 Vitreous china squatting plate urinal each L.S. 1.00 450.00 450.00
1541 P.V.C. automatic flushing cistern 5 lts capacity L.S. 1.00 275.00 275.00
9999 Flush pipe and spreaders G.I.for range of two squatting plates urinal L.S. 17.55 2.12 37.21
9999 Red lead, white lead and gaskit Cement, sand and grit etc. L.S. 53.82 2.12 114.10
9999 Painting of fittings etc. Carriage of materials LABOUR day day day 26.00 2.12 55.12
9977 Fitter (grade 1) 33.15 2.12 70.28
0116 Mason (brick layer) 1st class Beldar 2.50 784.00 1960.00
0123 TOTAL 1.00 784.00 784.00
0114 Add 1 % Water charges on "W" TOTAL 4.00 645.00 2580.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 8431.70
Add 15% CPOH on "Y" TOTAL 84.32
Add Cess @ 1% on "Z" Cost of each 8516.02
Say 1196.50
9712.52
1456.88
11169.40
111.69
11281.09
11281.10

17.6.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


1915 Details of cost for one no. MATERIAL each each 3.00 1053.00 3159.00
7361 Vitreous china squatting plate urinal each L.S. 1.00 500.00 500.00
1542 P.V.C. automatic flushing cistern 10 lts capacity L.S. 1.00 310.00 310.00
9999 Flush pipe and spreaders G.I.for range of three squatting plates urinal L.S. 17.55 2.12 37.21
9999 Red lead, white lead and gaskit Cement, sand and grit etc. L.S. 80.73 2.12 171.15
9999 Painting of fittings etc. Carriage of materials LABOUR day day day 26.00 2.12 55.12
9977 Fitter (grade 1) 42.12 2.12 89.29
0116 Mason (brick layer) 1st class Beldar 3.00 784.00 2352.00
0123 TOTAL 1.50 784.00 1176.00
0114 Add 1 % Water charges on "W" TOTAL 5.00 645.00 3225.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 11074.77
Add 15% CPOH on "Y" TOTAL 110.75
Add Cess @ 1% on "Z" Cost of each 11185.52
Say 1571.56
12757.08
1913.56
14670.64
146.71
14817.35
14817.35

17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. MATERIAL
Vitreous china squatting plate urinal
1915 each 4.00 1053.00 4212.00
7361 P.V.C. automatic flushing cistern 10 lts capacity each 1.00 500.00 500.00
1543 Flush pipe and spreaders G.I.for range of four squatting plates urinal each L.S. 1.00 450.00 450.00
9999 Red lead, white lead and gaskit Cement, sand and grit etc. L.S. 17.55 2.12 37.21
9999 Painting of fittings etc. Carriage of materials LABOUR L.S. 107.64 2.12 228.20
9999 Fitter (grade 1) L.S. 26.00 2.12 55.12
9977 Mason (brick layer) 1st class Beldar day day day 69.03 2.12 146.34
0116 TOTAL 3.50 784.00 2744.00
0123 Add 1 % Water charges on "W" TOTAL 1.75 784.00 1372.00
0114 Add GST on "X" (multiplying factor 0.1405) TOTAL 5.50 645.00 3547.50
Add 15% CPOH on "Y" TOTAL 13292.37
Add Cess @ 1% on "Z" Cost of each 132.92
Say 13425.29
1886.25
15311.54
2296.73
17608.27
176.08
17784.36
17784.35

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Code Description Unit Quantity Rate Rs. Amount Rs.


1947 Details of cost for one no. MATERIAL each each 1.00 725.00 725.00
1885 Vitreous china flat back wash basin 630x450 mm 15 mm C.P.brass tap each pair L.S. 2.00 270.00 540.00
1951 C.P. brass waste 32 mm L.S. 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks Red lead, white lead and gaskit L.S. 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 16.12 2.12 34.17
9999 Painting of brackets, fittings etc. Carriage of materials day day day 13.39 2.12 28.39
9999 LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 13.52 2.12 28.66
0116 Mason (brick layer) 1st class Beldar 0.33 784.00 258.72
0123 TOTAL 0.33 784.00 258.72
0114 Add 1 % Water charges on "W" TOTAL 0.67 645.00 432.15
Add GST on "X" (multiplying factor 0.1405) TOTAL 2535.86
Add 15% CPOH on "Y" TOTAL 25.36
Add Cess @ 1% on "Z" Cost of each 2561.22
Say 359.85
2921.07
438.16
3359.23
33.59
3392.83
3392.85

17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


1947 Details of cost for one no. MATERIAL each each 1.00 725.00 725.00
1885 Vitreous china flat back wash basin 630x450 mm 15 mm C.P.brass tap each pair L.S. 1.00 270.00 270.00
1951 C.P. brass waste 32 mm L.S. 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks Red lead, white lead and gaskit L.S. 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 16.12 2.12 34.17
9999 Painting of brackets, fittings etc. Carriage of materials day day day 13.39 2.12 28.39
9999 LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 13.52 2.12 28.66
0116 Mason (brick layer) 1st class Beldar 0.30 784.00 235.20
0123 TOTAL 0.33 784.00 258.72
0114 Add 1 % Water charges on "W" TOTAL 0.63 645.00 406.35
Add GST on "X" (multiplying factor 0.1405) 2216.54
22.17
2238.71
314.54
TOTAL 2553.25
Add 15% CPOH on "Y" TOTAL 382.99
Add Cess @ 1% on "Z" Cost of each 2936.23
Say 29.36
2965.60
2965.60

17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Code Description Unit Quantity Rate Rs. Amount Rs.


3229 Details of cost for one no. MATERIAL each each 1.00 550.00 550.00
1885 Vitreous china flat back wash basin 550x400 mm 15 mm C.P.brass tap each pair L.S. 2.00 270.00 540.00
1951 C.P. brass waste 32 mm L.S. 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks Red lead, white lead and gaskit L.S. 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 16.12 2.12 34.17
9999 Painting of brackets, fittings etc. Carriage of materials day day day 13.39 2.12 28.39
9999 LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 13.52 2.12 28.66
0116 Mason (brick layer) 1st class Beldar 0.33 784.00 258.72
0123 TOTAL 0.33 784.00 258.72
0114 Add 1 % Water charges on "W" TOTAL 0.67 645.00 432.15
Add GST on "X" (multiplying factor 0.1405) TOTAL 2360.86
Add 15% CPOH on "Y" TOTAL 23.61
Add Cess @ 1% on "Z" Cost of each 2384.47
Say 335.02
2719.49
407.92
3127.41
31.27
3158.69
3158.70

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


3229 Details of cost for one no. MATERIAL each each 1.00 550.00 550.00
1885 Vitreous china flat back wash basin 550x400 mm 15 mm C.P.brass tap each pair L.S. 1.00 270.00 270.00
1951 C.P. brass waste 32 mm L.S. 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks Red lead, white lead and gaskit L.S. 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 16.12 2.12 34.17
9999 Painting of brackets, fittings etc. Carriage of materials day day day 13.39 2.12 28.39
9999 LABOUR 26.91 2.12 57.05
9977 Fitter (grade 1) 13.52 2.12 28.66
0116 Mason (brick layer) 1st class Beldar 0.30 784.00 235.20
0123 TOTAL 0.33 784.00 258.72
0114 Add 1 % Water charges on "W" TOTAL 0.63 645.00 406.35
Add GST on "X" (multiplying factor 0.1405) TOTAL 2041.54
Add 15% CPOH on "Y" TOTAL 20.42
Add Cess @ 1% on "Z" Cost of each 2061.96
Say 289.71
2351.66
352.75
2704.41
27.04
2731.46
2731.45

17.7.5 White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


1949 Details of cost for one no. MATERIAL each each 1.00 725.00 725.00
1885 Vitreous china angle back wash basin 600x480 mm 15 mm C.P.brass tap each pair L.S. 1.00 270.00 270.00
1951 C.P. brass waste 32 mm 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks Red lead, white lead and gaskit 1.00 88.00 88.00
9999 16.12 2.12 34.17

9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 2216.54
Add 1 % Water charges on "W" 22.17
TOTAL 2238.71
Add GST on "X" (multiplying factor 0.1405) 314.54
TOTAL 2553.25
Add 15% CPOH on "Y" 382.99
TOTAL 2936.23
Add Cess @ 1% on "Z" 29.36
Cost of each 2965.60
Say 2965.60

17.7.6 White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1950 Vitreous china angle back wash basin 400x400 mm each 1.00 425.00 425.00
1885 15 mm C.P.brass tap each 1.00 270.00 270.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 1916.54
Add 1 % Water charges on "W" 19.17
TOTAL 1935.71
Add GST on "X" (multiplying factor 0.1405) 271.97
TOTAL 2207.68
Add 15% CPOH on "Y" 331.15
TOTAL 2538.83
Add Cess @ 1% on "Z" 25.39
Cost of each 2564.21
Say 2564.20

17.7.7 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7004 Vitreous china flat back wash basin 450x300 mm each 1.00 280.00 280.00
1885 15 mm C.P.brass tap each 1.00 270.00 270.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 1771.54
Add 1 % Water charges on "W" 17.72
TOTAL 1789.26
Add GST on "X" (multiplying factor 0.1405) 251.39
TOTAL 2040.65
Add 15% CPOH on "Y" 306.10
TOTAL 2346.75
Add Cess @ 1% on "Z" 23.47
Cost of each 2370.21
Say 2370.20
17.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar
taps with elbow including operated levers

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3213 Vitreous china Surgeon type wash basin of size 660x460 mm
each 1.00 1100.00 1100.00
7363 15 mm C.P. brass tap with elbow operation lever each 2.00 430.00 860.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.67 645.00 432.15
TOTAL 3230.86
Add 1 % Water charges on "W" 32.31
TOTAL 3263.17
Add GST on "X" (multiplying factor 0.1405) 458.48
TOTAL 3721.65
Add 15% CPOH on "Y" 558.25
TOTAL 4279.89
Add Cess @ 1% on "Z" 42.80
Cost of each 4322.69
Say 4322.70
17.7.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers I
Marked

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3213 Vitreous china Surgeon type wash basin of size 660x460 mm
each 1.00 1100.00 1100.00
7363 15 mm C.P. brass tap with elbow operation lever each 1.00 430.00 430.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 2751.54
Add 1 % Water charges on "W" 27.52
TOTAL 2779.06
Add GST on "X" (multiplying factor 0.1405) 390.46
TOTAL 3169.52
Add 15% CPOH on "Y" 475.43
TOTAL 3644.94
Add Cess @ 1% on "Z" 36.45
Cost of each 3681.39
Say 3681.40

17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X
355mm each 1.00 1500.00 1500.00
1885 15 mm C.P.brass tap each 1.00 270.00 270.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20

0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 2991.54
Add 1 % Water charges on "W" 29.92
TOTAL 3021.46
Add GST on "X" (multiplying factor 0.1405) 424.51
TOTAL 3445.97
Add 15% CPOH on "Y" 516.90
TOTAL 3962.87
Add Cess @ 1% on "Z" 39.63
Cost of each 4002.50
Say 4002.50

17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X
345mm each 1.00 2000.00 2000.00
1885 15 mm C.P.brass tap each 1.00 270.00 270.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 3491.54
Add 1 % Water charges on "W" 34.92
TOTAL 3526.46
Add GST on "X" (multiplying factor 0.1405) 495.47
TOTAL 4021.93
Add 15% CPOH on "Y" 603.29
TOTAL 4625.21
Add Cess @ 1% on "Z" 46.25
Cost of each 4671.47
Say 4671.45
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, includin
A painting of fittings and brackets, cutting and making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3229 Vitreous china flat back wash basin 550x400 mm each 1.00 550.00 550.00
9001 C.P. Brass Centre Hole Basin Mixer With Cast Spout (
Kigston/Marc/Prima/ Parko/Hindware) each 1.00 1600.00 1600.00
1951 C.P. brass waste 32 mm each 1.00 85.00 85.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, Sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.63 645.00 406.35
TOTAL 3395.06
Add 1 % Water charges on "W" 33.95
TOTAL 3429.01
Add GST on "X" (multiplying factor 0.1405) 481.78
TOTAL 3910.79
Add 15% CPOH on "Y" 586.62
TOTAL 4497.41
Add Cess @ 1% on "Z" 44.97
Cost of each 4542.38
Say 4542.40

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including
17.7 painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size
B 550x400 mm with single 15 mm PTMT
pillar cock.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No.
MATERIAL
3229 Vitreous china flat back wash basin 550x400 mm each 1.00 550.00 550.00
7406 PTMT pillar cock each 1.00 115.00 115.00
7491 PTMT - Waste Coupling 31/32 mm each 1.00 34.00 34.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Red Lead, White Lead and Gasket L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc L.S. 13.39 2.12 28.39
9999 Painting of brackets, fittings etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.67 645.00 432.15
TOTAL 1884.86
Add 1 % Water charges on "W" 18.85
TOTAL 1903.71
Add GST on "X" (multiplying factor 0.1405) 267.47
TOTAL 2171.18
Add 15% CPOH on "Y" 325.68
TOTAL 2496.86
Add Cess @ 1% on "Z" 24.97
Cost of each 2521.83
Say 2521.85
17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pedestal
MATERIAL
1396 Vitrous china pedestal for wash basin each 1.00 950.00 950.00
9999 White cement mortar L.S. 40.30 2.12 85.44
9988 Carriage of materials and fixing charges L.S. 40.43 2.12 85.71
TOTAL 1121.15
Add 1 % Water charges on "W" 11.21
TOTAL 1132.36
Add GST on "X" (multiplying factor 0.1405) 159.10
TOTAL 1291.46
Add 15% CPOH on "Y" 193.72
TOTAL 1485.17
Add Cess @ 1% on "Z" 14.85
Cost of each 1500.03
Say 1500.05
17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including paint
the fittings and brackets, cutting and making good the walls wherever required:
17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm each 1.00 1300.00 1300.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
1315 C.P.brass chain with 40 mm dia rubber plug each 1.00 40.00 40.00
1952 C.P. brass waste 40 mm each 1.00 100.00 100.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting brackets etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 2468.67
Add 1 % Water charges on "W" 24.69
TOTAL 2493.36
Add GST on "X" (multiplying factor 0.1405) 350.32
TOTAL 2843.68

Add 15% CPOH on "Y" 426.55


TOTAL 3270.23
Add Cess @ 1% on "Z" 32.70
Cost of each 3302.93
Say 3302.95
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, includ
painting of fittings and brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.1 510x1040 mm bowl depth 250 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7095 Stainless steel kitchen sink - with drain board bowl depth 250
mm. each 1.00 3000.00 3000.00
1309 C.I. bracket for wash basin and sinks pair 2.00 88.00 176.00
9999 Cement, sand and grit etc. L.S. 27.04 2.12 57.32
9999 Painting of brackets etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.60 784.00 470.40
0114 Beldar day 0.82 645.00 528.90
TOTAL 4490.82
Add 1 % Water charges on "W" 44.91
TOTAL 4535.72
Add GST on "X" (multiplying factor 0.1405) 637.27
TOTAL 5172.99
Add 15% CPOH on "Y" 775.95
TOTAL 5948.94
Add Cess @ 1% on "Z" 59.49
Cost of each 6008.43
Say 6008.45

17.10.1.2 510x1040 mm bowl depth 225 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7096 Stainlees steel kitchen sink - with drain board 510 x 1040mm
bowl depth 225 mm. each 1.00 3500.00 3500.00
1309 C.I. bracket for wash basin and sinks pair 2.00 88.00 176.00
9999 Cement, sand and grit etc. L.S. 27.04 2.12 57.32
9999 Painting of brackets etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.60 784.00 470.40
0114 Beldar day 0.82 645.00 528.90
TOTAL 4990.82
Add 1 % Water charges on "W" 49.91
TOTAL 5040.72
Add GST on "X" (multiplying factor 0.1405) 708.22
TOTAL 5748.95
Add 15% CPOH on "Y" 862.34
TOTAL 6611.29
Add Cess @ 1% on "Z" 66.11
Cost of each 6677.40
Say 6677.40
17.10.1.3 510x1040 mm bowl depth 200 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7097 Stainlees steel kitchen sink - with drain board 510 x 1040mm
bowl depth 200 mm. each 1.00 3200.00 3200.00
1309 C.I. bracket for wash basin and sinks pair 2.00 88.00 176.00
9999 Cement, sand and grit etc. L.S. 27.04 2.12 57.32
9999 Painting of brackets etc. L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.60 784.00 470.40
0114 Beldar day 0.82 645.00 528.90
TOTAL 4690.82
Add 1 % Water charges on "W" 46.91
TOTAL 4737.72
Add GST on "X" (multiplying factor 0.1405) 665.65
TOTAL 5403.37
Add 15% CPOH on "Y" 810.51
TOTAL 6213.88
Add Cess @ 1% on "Z" 62.14
Cost of each 6276.02
Say 6276.00
17.10.1.4 510x1040 mm bowl depth 178 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7098 Stainless steel kitchen sink - with drain board 510x1040mm
bowl depth 178 mm each 1.00 3000.00 3000.00
1309 C.I. bracket for wash basin and sinks pair 2.00 88.00 176.00
9999 Cement, sand and grit etc. L.S. 27.04 2.12 57.32
9999 Painting brackets L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.60 784.00 470.40
0114 Beldar day 0.82 645.00 528.90
TOTAL 4490.82
Add 1 % Water charges on "W" 44.91
TOTAL 4535.72
Add GST on "X" (multiplying factor 0.1405) 637.27
TOTAL 5172.99
Add 15% CPOH on "Y" 775.95
TOTAL 5948.94
Add Cess @ 1% on "Z" 59.49
Cost of each 6008.43
Say 6008.45
17.10.2 Kitchen sink without drain board
17.10.2.1 610x510 mm bowl depth 200 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7101 Stainless steel kitchen sink - without drain board 610x510mm
bowl depth 200 mm each 1.00 2200.00 2200.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9999 Painting brackets L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 3194.77
Add 1 % Water charges on "W" 31.95
TOTAL 3226.72
Add GST on "X" (multiplying factor 0.1405) 453.35
TOTAL 3680.08
Add 15% CPOH on "Y" 552.01
TOTAL 4232.09
Add Cess @ 1% on "Z" 42.32
Cost of each 4274.41
Say 4274.40
17.10.2.2 610x460 mm bowl depth 200 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7102 Stainless steel kitchen sink - without drain board 610x460mm
bowl depth 200 mm. each 1.00 1500.00 1500.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9999 Painting brackets L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 2494.77
Add 1 % Water charges on "W" 24.95
TOTAL 2519.72
Add GST on "X" (multiplying factor 0.1405) 354.02
TOTAL 2873.74
Add 15% CPOH on "Y" 431.06
TOTAL 3304.80
Add Cess @ 1% on "Z" 33.05
Cost of each 3337.85
Say 3337.85

17.10.2.3 470x420 mm bowl depth 178 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7103 Stainless steel kitchen sink - without drain board 470x420mm
bowl depth 178 mm each 1.00 1200.00 1200.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9999 Painting brackets L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 2194.77
Add 1 % Water charges on "W" 21.95
TOTAL 2216.72
Add GST on "X" (multiplying factor 0.1405) 311.45
TOTAL 2528.17
Add 15% CPOH on "Y" 379.23
TOTAL 2907.40
Add Cess @ 1% on "Z" 29.07
Cost of each 2936.47
Say 2936.45

17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste an
40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wher
required :

17.11.1 Size 450x300x150 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1871 White vitreous china laboratry sink 450x300x150 mm each 1.00 1500.00 1500.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
1315 C.P.brass chain with 40 mm dia rubber plug each 1.00 40.00 40.00
1952 C.P. brass waste 40 mm each 1.00 100.00 100.00
1895 C.P.brass trap40 mm dia each 1.00 315.00 315.00
3617 C.P.brass union 40 mm dia each 1.00 210.00 210.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Sundries L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 3193.67
Add 1 % Water charges on "W" 31.94
TOTAL 3225.61
Add GST on "X" (multiplying factor 0.1405) 453.20
TOTAL 3678.81
Add 15% CPOH on "Y" 551.82
TOTAL 4230.63
Add Cess @ 1% on "Z" 42.31
Cost of each 4272.94
Say 4272.95

17.11.2 Size 600x450x200 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1872 White vitreous china laboratry sink 600x450x200 mm each 1.00 2500.00 2500.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
1315 C.P.brass chain with 40 mm dia rubber plug each 1.00 40.00 40.00
1952 C.P. brass waste 40 mm each 1.00 100.00 100.00
1895 C.P.brass trap40 mm dia each 1.00 315.00 315.00
3617 C.P.brass union 40 mm dia each 1.00 210.00 210.00
9999 Red lead, white lead and gaskit L.S. 16.12 2.12 34.17
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Sundries L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0123 Mason (brick layer) 1st class day 0.33 784.00 258.72
0114 Beldar day 0.56 645.00 361.20
TOTAL 4193.67
Add 1 % Water charges on "W" 41.94
TOTAL 4235.61
Add GST on "X" (multiplying factor 0.1405) 595.10
TOTAL 4830.71
Add 15% CPOH on "Y" 724.61
TOTAL 5555.32
Add Cess @ 1% on "Z" 55.55
Cost of each 5610.87
Say 5610.85
17.12 Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever requir
17.12.1 White glazed fire clay draining board of size 600x450x 25 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7364 White glazed fire clay draining board 600x450x25 mm each 1.00 500.00 500.00
1309 C.I. bracket for wash basin and sinks pair 1.00 88.00 88.00
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9999 Painting brackets etc. L.S. 26.00 2.12 55.12
9977 Carriage of materials L.S. 7.80 2.12 16.54

LABOUR
0116 Fitter (grade 1) day 0.06 784.00 47.04
0123 Mason (brick layer) 1st class day 0.17 784.00 133.28
0114 Beldar day 0.22 645.00 141.90
TOTAL 1010.26
Add 1 % Water charges on "W" 10.10
TOTAL 1020.37
Add GST on "X" (multiplying factor 0.1405) 143.36
TOTAL 1163.73
Add 15% CPOH on "Y" 174.56
TOTAL 1338.29
Add Cess @ 1% on "Z" 13.38
Cost of each 1351.67
Say 1351.65

17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type) :
17.13.1 Long pattern W.C. pan of size 580 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1953 Vitreous china indian type w.c. pan size 580 mm each 1.00 475.00 475.00
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1246.55
Add 1 % Water charges on "W" 12.47
TOTAL 1259.01
Add GST on "X" (multiplying factor 0.1405) 176.89
TOTAL 1435.91
Add 15% CPOH on "Y" 215.39
TOTAL 1651.29
Add Cess @ 1% on "Z" 16.51
Cost of each 1667.81
Say 1667.80

17.13.2 Orissa pattern W.C. pan of size 580x440 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1954 Vitreous china orrisa type w.c. pan size 580 mm each 1.00 1290.00 1290.00
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 2061.55
Add 1 % Water charges on "W" 20.62
TOTAL 2082.16
Add GST on "X" (multiplying factor 0.1405) 292.54
TOTAL 2374.71
Add 15% CPOH on "Y" 356.21
TOTAL 2730.92
Add Cess @ 1% on "Z" 27.31
Cost of each 2758.22
Say 2758.20

17.14 Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1 Orissa pattern W.C. pan 580x440 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
Difference in cost of
7104 Coloured Orissa pattern W.C. pan 580x440 mm each 1.00 1600.00 1600.00
1954 Vitreous china orrisa type w.c. pan size 580 mm each -1.00 1290.00 -1290.00
TOTAL 310.00
Add 1 % Water charges on "W" 3.10
TOTAL 313.10
Add GST on "X" (multiplying factor 0.1405) 43.99
TOTAL 357.09
Add 15% CPOH on "Y" 53.56
TOTAL 410.65
Add Cess @ 1% on "Z" 4.11
Cost of each 414.76
Say 414.75
17.15 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1955 Vitreous china pedestal type water closet each 1.00 1025.00 1025.00
9999 Cement, sand and grit etc. L.S. 13.39 2.12 28.39
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1796.55
Add 1 % Water charges on "W" 17.97
TOTAL 1814.51
Add GST on "X" (multiplying factor 0.1405) 254.94
TOTAL 2069.45
Add 15% CPOH on "Y" 310.42
TOTAL 2379.87
Add Cess @ 1% on "Z" 23.80
Cost of each 2403.67
Say 2403.65
17.16 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.
and cistern.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7105 Coloured Pedestal type W.C. pan 580x440 mm (European type)
each 1.00 850.00 850.00
Deduct
1955 Vitreous china pedestal type water closet each -1.00 1025.00 -1025.00
7106 Coloured Vitreous china 10 lit. low level cistern each 1.00 1000.00 1000.00
Deduct
7005 Vitreous china 10 litres low level cistern without fittings each -1.00 700.00 -700.00
TOTAL 125.00
Add 1 % Water charges on "W" 1.25
TOTAL 126.25
Add GST on "X" (multiplying factor 0.1405) 17.74
TOTAL 143.99
Add 15% CPOH on "Y" 21.60
TOTAL 165.59
Add Cess @ 1% on "Z" 1.66
Cost of each 167.24
Say 167.25
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of q
17.16A and make as approved by Engineer - in - charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No.
1313 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre
long with S.S. tringular plate for Eureopean type
W.C.(Hindware/Kingston/Prima/Parko/Marc) each 1.00 200.00 200.00
9999 Carriage of material and fixing charges L.S. 11.20 2.12 23.74
TOTAL 223.74
Add 1 % Water charges on "W" 2.24
TOTAL 225.98
Add GST on "X" (multiplying factor 0.1405) 31.75
TOTAL 257.73
Add 15% CPOH on "Y" 38.66
TOTAL 296.39
Add Cess @ 1% on "Z" 2.96
Cost of each 299.36
Say 299.35
17.17 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water
closet :
17.17.1 250x130x30 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pair
MATERIAL
1363 Vitreous china foot rests 250x130x30 mm pair 1.00 100.00 100.00
9988 Cement, sand including carriage of materials L.S. 8.06 2.12 17.09
LABOUR
0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
TOTAL 164.13
Add 1 % Water charges on "W" 1.64
TOTAL 165.77
Add GST on "X" (multiplying factor 0.1405) 23.29
TOTAL 189.06
Add 15% CPOH on "Y" 28.36
TOTAL 217.42
Add Cess @ 1% on "Z" 2.17
Cost for 1 pair 219.59
Say 219.60

17.17.2 250x125x25 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one pair
MATERIAL
1970 Vitreous china foot rests 250x125x25 mm pair 1.00 103.00 103.00
9988 Cement, sand including carriage of materials L.S. 8.06 2.12 17.09
LABOUR
0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
TOTAL 167.13
Add 1 % Water charges on "W" 1.67
TOTAL 168.80
Add GST on "X" (multiplying factor 0.1405) 23.72
TOTAL 192.51
Add 15% CPOH on "Y" 28.88
TOTAL 221.39
Add Cess @ 1% on "Z" 2.21
Cost for 1 pair 223.61
Say 223.60
17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittin
and fixtures complete.
17.18.1 10 litre capacity - White

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7358 Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with
fittings, accessories and flush pipe) each 1.00 575.00 575.00
9977 Carriage of materials L.S. 5.20 2.12 11.02
LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)
0116 Fitter (grade 1) day 0.125 784.00 98.00
0114 Beldar day 0.125 645.00 80.63
TOTAL 764.65
Add 1 % Water charges on "W" 7.65
TOTAL 772.30
Add GST on "X" (multiplying factor 0.1405) 108.51
TOTAL 880.80
Add 15% CPOH on "Y" 132.12
TOTAL 1012.92
Add Cess @ 1% on "Z" 10.13
Cost of each 1023.05
Say 1023.05
17.18.2 10 litre capacity - coloured
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7123 Coloured High density polythylene/ poly propylene 10 lit. (full
flush) capacity controlled low level flushing cistern with fittings
each 1.00 550.00 550.00
9977 Carriage of materials L.S. 5.20 2.12 11.02
LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)
0116 Fitter (grade 1) day 0.125 784.00 98.00
0114 Beldar day 0.125 645.00 80.63
TOTAL 739.65
Add 1 % Water charges on "W" 7.40
TOTAL 747.05
Add GST on "X" (multiplying factor 0.1405) 104.96
TOTAL 852.01
Add 15% CPOH on "Y" 127.80
TOTAL 979.81
Add Cess @ 1% on "Z" 9.80
Cost of each 989.60
Say 989.60

17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.
17.19.1 10 litre (full flush) capacity-white

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7126 White Vitreous china 10 lit. (full flush) capacity controlled low
level flushing cistern with all fittings each 1.00 700.00 700.00
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1443.16
Add 1 % Water charges on "W" 14.43
TOTAL 1457.59
Add GST on "X" (multiplying factor 0.1405) 204.79
TOTAL 1662.39
Add 15% CPOH on "Y" 249.36
TOTAL 1911.74
Add Cess @ 1% on "Z" 19.12
Cost of each 1930.86
Say 1930.85

17.19.2 10 litre (full flush) capacity-coloured

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7127 Coloured Vitreous china 10 lit. (full flush) capacity controlled low
level flushing cistern with all fittings each 1.00 1150.00 1150.00
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1893.16
Add 1 % Water charges on "W" 18.93
TOTAL 1912.09
Add GST on "X" (multiplying factor 0.1405) 268.65
TOTAL 2180.74
Add 15% CPOH on "Y" 327.11
TOTAL 2507.85
Add Cess @ 1% on "Z" 25.08
Cost of each 2532.93
Say 2532.95
17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
17.20.1 White solid plastic seat with lid

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1875 White plastic seat (solid)with lid C.P.brass hinges and rubber
buffers each 1.00 410.00 410.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 438.39
Add 1 % Water charges on "W" 4.38
TOTAL 442.77
Add GST on "X" (multiplying factor 0.1405) 62.21
TOTAL 504.98
Add 15% CPOH on "Y" 75.75
TOTAL 580.73
Add Cess @ 1% on "Z" 5.81
Cost of each 586.53
Say 586.55

17.20.2 Black solid plastic seat with lid

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber
buffers each 1.00 325.00 325.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 353.39
Add 1 % Water charges on "W" 3.53
TOTAL 356.92
Add GST on "X" (multiplying factor 0.1405) 50.15
TOTAL 407.07
Add 15% CPOH on "Y" 61.06
TOTAL 468.13
Add Cess @ 1% on "Z" 4.68
Cost of each 472.81
Say 472.80

17.20.3 Coloured (other than black & white) solid plastic seat with lid

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
Difference in cost of
7107 Coloured (other than black) solid P.V.C. seat in European W.C.
pan each 1.00 350.00 350.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 378.39
Add 1 % Water charges on "W" 3.78
TOTAL 382.17
Add GST on "X" (multiplying factor 0.1405) 53.69
TOTAL 435.87
Add 15% CPOH on "Y" 65.38
TOTAL 501.25
Add Cess @ 1% on "Z" 5.01
Cost of each 506.26
Say 506.25
17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1614 G.I. inlet connection each 1.00 70.00 70.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 98.39
Add 1 % Water charges on "W" 0.98
TOTAL 99.37
Add GST on "X" (multiplying factor 0.1405) 13.96
TOTAL 113.33
Add 15% CPOH on "Y" 17.00
TOTAL 130.33
Add Cess @ 1% on "Z" 1.30
Cost of each 131.64
Say 131.65

17.22A
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7121 Bottle Trap each 1.00 620.00 620.00
9988 Carriage and sundries L.S. 20.00 2.12 42.40
TOTAL 662.40
Add 1 % Water charges on "W" 6.62
TOTAL 669.02
Add GST on "X" (multiplying factor 0.1405) 94.00
TOTAL 763.02
Add 15% CPOH on "Y" 114.45
TOTAL 877.48
Add Cess @ 1% on "Z" 8.77
Cost of each 886.25
Say 886.25
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
17.22B

(a) 15 mm nominal dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7122 CP Brass Single lever telephonic wall mixer of approved make
each 1.00 4500.00 4500.00
9977 Carriage of material and fixing charges L.S. 34.71 2.12 73.59
TOTAL 4573.59
Add 1 % Water charges on "W" 45.74
TOTAL 4619.32
Add GST on "X" (multiplying factor 0.1405) 649.01
TOTAL 5268.34
Add 15% CPOH on "Y" 790.25
TOTAL 6058.59
Add Cess @ 1% on "Z" 60.59
Cost of each 6119.17
Say 6119.15
17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of
430x260x350 mm or 340x410x265 mm sizes respectively.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1913 Vitreous china lipped front urinal each 1.00 470.00 470.00
9977 Carriage of materials L.S. 9.49 2.12 20.12
LABOUR
0116 Fitter (grade 1) day 0.38 784.00 297.92
0114 Beldar day 0.38 645.00 245.10
TOTAL 1033.14
Add 1 % Water charges on "W" 10.33
TOTAL 1043.47
Add GST on "X" (multiplying factor 0.1405) 146.61
TOTAL 1190.08
Add 15% CPOH on "Y" 178.51
TOTAL 1368.59
Add Cess @ 1% on "Z" 13.69
Cost of each 1382.28
Say 1382.30

17.24 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1915 Vitreous china squatting plate urinal each 1.00 1053.00 1053.00
9999 Cement, sand and grit etc. L.S. 10.79 2.12 22.87
9977 Carriage of materials L.S. 13.39 2.12 28.39
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 1.00 645.00 645.00
TOTAL 2533.26
Add 1 % Water charges on "W" 25.33
TOTAL 2558.59
Add GST on "X" (multiplying factor 0.1405) 359.48
TOTAL 2918.08
Add 15% CPOH on "Y" 437.71
TOTAL 3355.79
Add Cess @ 1% on "Z" 33.56
Cost of each 3389.35
Say 3389.35
17.25 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
17.25.1 Flat back wash basin of size 630x450 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1947 Vitreous china flat back wash basin 630x450 mm each 1.00 725.00 725.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 859.22
Add 1 % Water charges on "W" 8.59
TOTAL 867.81
Add GST on "X" (multiplying factor 0.1405) 121.93
TOTAL 989.74
Add 15% CPOH on "Y" 148.46
TOTAL 1138.20
Add Cess @ 1% on "Z" 11.38
Cost of each 1149.58
Say 1149.60
17.25.2 Flat back wash basin of size 550x400 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3229 Vitreous china flat back wash basin 550x400 mm each 1.00 550.00 550.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 684.22
Add 1 % Water charges on "W" 6.84
TOTAL 691.06
Add GST on "X" (multiplying factor 0.1405) 97.09
TOTAL 788.15
Add 15% CPOH on "Y" 118.22
TOTAL 906.38
Add Cess @ 1% on "Z" 9.06
Cost of each 915.44
Say 915.45

17.25.3 Angle back wash basin of size 600x480 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1949 Vitreous china angle back wash basin 600x480 mm each 1.00 725.00 725.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 859.22
Add 1 % Water charges on "W" 8.59
TOTAL 867.81
Add GST on "X" (multiplying factor 0.1405) 121.93
TOTAL 989.74
Add 15% CPOH on "Y" 148.46
TOTAL 1138.20
Add Cess @ 1% on "Z" 11.38
Cost of each 1149.58
Say 1149.60

17.25.4 Angle back wash basin of size 400x400 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1950 Vitreous china angle back wash basin 400x400 mm each 1.00 425.00 425.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 559.22
Add 1 % Water charges on "W" 5.59
TOTAL 564.81
Add GST on "X" (multiplying factor 0.1405) 79.36
TOTAL 644.17
Add 15% CPOH on "Y" 96.62
TOTAL 740.79
Add Cess @ 1% on "Z" 7.41
Cost of each 748.20
Say 748.20

17.25.5 Flat back wash basin of size 450x300 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7004 Vitreous china flat back wash basin 450x300 mm each 1.00 280.00 280.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 414.22
Add 1 % Water charges on "W" 4.14
TOTAL 418.36
Add GST on "X" (multiplying factor 0.1405) 58.78
TOTAL 477.14
Add 15% CPOH on "Y" 71.57
TOTAL 548.71
Add Cess @ 1% on "Z" 5.49
Cost of each 554.20
Say 554.20
17.25.6 Surgeon type wash basin of size 660x460 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3213 Vitreous china Surgeon type wash basin of size 660x460 mm
each 1.00 1100.00 1100.00
9999 Fixing charges L.S. 53.82 2.12 114.10
9977 Carriage of materials L.S. 9.49 2.12 20.12
TOTAL 1234.22
Add 1 % Water charges on "W" 12.34
TOTAL 1246.56
Add GST on "X" (multiplying factor 0.1405) 175.14
TOTAL 1421.70
Add 15% CPOH on "Y" 213.26
TOTAL 1634.96
Add Cess @ 1% on "Z" 16.35
Cost of each 1651.31
Say 1651.30

17.26 Providing and fixing kitchen sink including making all connections excluding cost of fittings.
17.26.1 White glazed fire clay sink of size 600x450x250 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm each 1.00 1300.00 1300.00
9999 Fixing charges L.S. 40.43 2.12 85.71
9977 Carriage of materials L.S. 10.79 2.12 22.87
TOTAL 1408.59
Add 1 % Water charges on "W" 14.09
TOTAL 1422.67
Add GST on "X" (multiplying factor 0.1405) 199.89
TOTAL 1622.56
Add 15% CPOH on "Y" 243.38
TOTAL 1865.94
Add Cess @ 1% on "Z" 18.66
Cost of each 1884.60
Say 1884.60
17.27 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings :
17.27.1 Size 450x300x150 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1871 White vitreous china laboratry sink 450x300x150 mm each 1.00 1500.00 1500.00
9999 Fixing charges L.S. 40.43 2.12 85.71
9977 Carriage of materials L.S. 10.79 2.12 22.87
TOTAL 1608.59
Add 1 % Water charges on "W" 16.09
TOTAL 1624.67
Add GST on "X" (multiplying factor 0.1405) 228.27
TOTAL 1852.94
Add 15% CPOH on "Y" 277.94
TOTAL 2130.88
Add Cess @ 1% on "Z" 21.31
Cost of each 2152.19
Say 2152.20

17.27.2 Size 600x450x200 mm


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1872 White vitreous china laboratry sink 600x450x200 mm each 1.00 2500.00 2500.00
9999 Fixing charges L.S. 40.43 2.12 85.71
9977 Carriage of materials L.S. 10.79 2.12 22.87

TOTAL 2608.59
Add 1 % Water charges on "W" 26.09
TOTAL 2634.67
Add GST on "X" (multiplying factor 0.1405) 370.17
TOTAL 3004.84
Add 15% CPOH on "Y" 450.73
TOTAL 3455.57
Add Cess @ 1% on "Z" 34.56
Cost of each 3490.13
Say 3490.15
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia
with length not less than 700 mm i/c PVC waste fittings each 1.00 25.00 25.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 67.99
Add 1 % Water charges on "W" 0.68
TOTAL 68.67
Add GST on "X" (multiplying factor 0.1405) 9.65
TOTAL 78.32
Add 15% CPOH on "Y" 11.75
TOTAL 90.07
Add Cess @ 1% on "Z" 0.90
Cost of each 90.97
Say 90.95

17.28.1.2 40 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia
with length not less than 700 mm i/c PVC waste fittings each 1.00 33.00 33.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 75.99
Add 1 % Water charges on "W" 0.76
TOTAL 76.75
Add GST on "X" (multiplying factor 0.1405) 10.78
TOTAL 87.54
Add 15% CPOH on "Y" 13.13
TOTAL 100.67
Add Cess @ 1% on "Z" 1.01
Cost of each 101.67
Say 101.65

17.28.2 Flexible pipe


17.28.2.1 32 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin
32 mm dia with length not less than 700 mm i/c PVC waste
fittings each 1.00 35.00 35.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 77.99
Add 1 % Water charges on "W" 0.78
TOTAL 78.77
Add GST on "X" (multiplying factor 0.1405) 11.07
TOTAL 89.84
Add 15% CPOH on "Y" 13.48
TOTAL 103.32
Add Cess @ 1% on "Z" 1.03
Cost of each 104.35
Say 104.35
17.28.2.2 40 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin
40 mm dia with length not less than 700 mm i/c PVC waste
fittings each 1.00 35.00 35.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 77.99
Add 1 % Water charges on "W" 0.78
TOTAL 78.77
Add GST on "X" (multiplying factor 0.1405) 11.07
TOTAL 89.84
Add 15% CPOH on "Y" 13.48
TOTAL 103.32
Add Cess @ 1% on "Z" 1.03
Cost of each 104.35
Say 104.35

17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1369 S.C.I. gully or nahani grating 100 mm dia each 1.00 25.00 25.00
9988 Carriage of materials and fixing charges L.S. 4.16 2.12 8.82
TOTAL 33.82
Add 1 % Water charges on "W" 0.34
TOTAL 34.16
Add GST on "X" (multiplying factor 0.1405) 4.80
TOTAL 38.96
Add 15% CPOH on "Y" 5.84
TOTAL 44.80
Add Cess @ 1% on "Z" 0.45
Cost of each 45.25
Say 45.25

17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1350 Mosquito proof coupling of approved design each 1.00 30.00 30.00
9988 Carriage of materials and fixing charges L.S. 1.82 2.12 3.86
TOTAL 33.86
Add 1 % Water charges on "W" 0.34
TOTAL 34.20
Add GST on "X" (multiplying factor 0.1405) 4.80
TOTAL 39.00
Add 15% CPOH on "Y" 5.85
TOTAL 44.85
Add Cess @ 1% on "Z" 0.45
Cost of each 45.30
Say 45.30

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board grou
fixed to wooden cleats with C.P. brass screws and washers complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1392 Mirror of superior make glass 60x45 cm each 1.00 450.00 450.00
7116 Hard board 6 mm thick sqm 0.27 115.00 31.05
600x450 mm Wooden cleats
8.23 Rate as per item no 8.23 of SH : Cladding work each 4.00 35.50 142.00
0588 Chromium plated Brass screws 25 mm 100 Nos 0.04 180.00 7.20
9977 Carriage of materials L.S. 4.16 2.12 8.82
9999 Sundries L.S. 1.43 2.12 3.03
LABOUR
0112 Carpenter 2nd class day 0.33 714.00 235.62
0114 Beldar day 0.33 645.00 212.85
TOTAL 1090.57
Add 1 % Water charges on "W-A" 9.49
TOTAL 1100.06
Add GST on "X-A" (multiplying factor 0.1405) 134.61
TOTAL 1234.66
Add 15% CPOH on "Y-A" 163.90
TOTAL 1398.56
Add Cess @ 1% on "Z-A" 12.57
Cost of each 1411.13
Say 1411.15
17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approve
make and shade with 6 mm thick hard board backing :
17.32.1 Circular shape 450 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame
each 1.00 400.00 400.00
Hard board 0.45x0.45 = 0.2025 sqm
Add wastage @ 10% = 0.0203 sqm
= 0.2228 sqm say 0.22sqm
7116 Hard board 6 mm thick sqm 0.22 115.00 25.30
7048 Rawl plug 50 mm (designation 10 no.) each 2.00 22.00 44.00
0588 Chromium plated Brass screws 25 mm 100 Nos 0.02 180.00 3.60
9999 Sundries L.S. 1.43 2.12 3.03
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0112 Carpenter 2nd class day 0.33 714.00 235.62
0114 Beldar day 0.33 645.00 212.85
TOTAL 933.22
Add 1 % Water charges on "W" 9.33
TOTAL 942.55
Add GST on "X" (multiplying factor 0.1405) 132.43
TOTAL 1074.98
Add 15% CPOH on "Y" 161.25
TOTAL 1236.23
Add Cess @ 1% on "Z" 12.36
Cost of each 1248.59
Say 1248.60
17.32.2 Rectangular shape 453x357 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded
frame each 1.00 290.00 290.00
Hard board 0.453x0.357 = 0.1617 sqm
Add wastage @ 10% = 0.0162 sqm
= 0.1779 sqm say 0.18 sqm
7116 Hard board 6 mm thick sqm 0.18 115.00 20.70
7048 Rawl plug 50 mm (designation 10 no.) each 4.00 22.00 88.00
0588 Chromium plated Brass screws 25 mm 100 Nos 0.04 180.00 7.20
9999 Sundries L.S. 1.43 2.12 3.03
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0112 Carpenter 2nd class day 0.33 714.00 235.62
0114 Beldar day 0.33 645.00 212.85
TOTAL 866.22
Add 1 % Water charges on "W" 8.66
TOTAL 874.88
Add GST on "X" (multiplying factor 0.1405) 122.92
TOTAL 997.80
Add 15% CPOH on "Y" 149.67
TOTAL 1147.47
Add Cess @ 1% on "Z" 11.47
Cost of each 1158.95
Say 1158.95

17.32.3 Oval shape 450x350 mm (outer dimensions)


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7114 Ovel shape 450x350 mm (outer dimensions) Mirror with Plastic
moulded frame each 1.00 290.00 290.00
Hard board 0.45x0.35=0.1575 sqm
Add wastage @ 10% = 0.0158 sqm
= 0.1733 sqm say 0.17 sqm
7116 Hard board 6 mm thick sqm 0.17 115.00 19.55
7048 Rawl plug 50 mm (designation 10 no.) each 4.00 22.00 88.00
0588 Chromium plated Brass screws 25 mm 100 Nos 0.04 180.00 7.20
9999 Sundries L.S. 1.43 2.12 3.03
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0112 Carpenter 2nd class day 0.33 714.00 235.62
0114 Beldar day 0.33 645.00 212.85
TOTAL 865.07
Add 1 % Water charges on "W" 8.65
TOTAL 873.72
Add GST on "X" (multiplying factor 0.1405) 122.76
TOTAL 996.48
Add 15% CPOH on "Y" 149.47
TOTAL 1145.95
Add Cess @ 1% on "Z" 11.46
Cost of each 1157.41
Say 1157.40
17.32.4 Rectangular shape 1500x450 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded
frame each 1.00 670.00 670.00
Hard board 1.50x0.45 = 0.675 sqm
Add wastage @ 10% = 0.0675 sqm
= 0.7425 sqm say 0.74sqm
7116 Hard board 6 mm thick sqm 0.74 115.00 85.10
7048 Rawl plug 50 mm (designation 10 no.) each 6.00 22.00 132.00
0588 Chromium plated Brass screws 25 mm 100 Nos 0.06 180.00 10.80
9999 Sundries L.S. 1.43 2.12 3.03
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0112 Carpenter 2nd class day 0.33 714.00 235.62
0114 Beldar day 0.33 645.00 212.85
TOTAL 1358.22
Add 1 % Water charges on "W" 13.58
TOTAL 1371.80
Add GST on "X" (multiplying factor 0.1405) 192.74
TOTAL 1564.54
Add 15% CPOH on "Y" 234.68
TOTAL 1799.22
Add Cess @ 1% on "Z" 17.99
Cost of each 1817.21
Say 1817.20
17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass bra
and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3228 600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size each 1.00 300.00 300.00
7048 Rawl plug 50 mm (designation 10 no.) each 2.00 22.00 44.00
0586 Chromium plated Brass screws 40 mm 100 Nos 0.04 290.00 11.60
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0112 Carpenter 2nd class day 0.25 714.00 178.50
0114 Beldar day 0.25 645.00 161.25
TOTAL 704.17
Add 1 % Water charges on "W" 7.04
TOTAL 711.21
Add GST on "X" (multiplying factor 0.1405) 99.93
TOTAL 811.14
Add 15% CPOH on "Y" 121.67
TOTAL 932.81
Add Cess @ 1% on "Z" 9.33
Cost of each 942.13
Say 942.15
17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. MATERIAL
C.P.brass toilet paper holder of standard size
1889 Wooden cleats each 1.00 280.00 280.00

8.23 Rate as per item no 8.23 of SH : Cladding work Chromium plated Brass each 100 Nos 2.00 35.50 71.00
0588 screws 25 mm Carriage of materials L.S. 0.02 180.00 3.60
9977 LABOUR day day 4.29 2.12 9.09
0112 Carpenter 2nd class Beldar 0.12 714.00 85.68
0114 TOTAL 0.12 645.00 77.40
Add 1 % Water charges on "W-A" TOTAL 526.77
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 4.56
Add 15% CPOH on "Y-A" TOTAL 531.33
Add Cess @ 1% on "Z-A" Cost of each 64.68
Say 596.01
78.75
674.76
6.04
680.80
680.80

17.34.2 Vitreous china

Code Description Unit Quantity Rate Rs. Amount Rs.


3749 Details of cost of one no. MATERIAL each 1.00 110.00 110.00
8.23 Vitreous china toilet paper holder of standard size Wooden cleats each 100 Nos 2.00 35.50 71.00
0588 Rate as per item no 8.23 of SH : Cladding work Chromium plated Brass L.S. 0.06 180.00 10.80
9977 screws 25 mm Carriage of materials day day 4.29 2.12 9.09
0112 LABOUR 0.12 714.00 85.68
0114 Carpenter 2nd class Beldar 0.12 645.00 77.40
TOTAL 363.97
Add 1 % Water charges on "W-A" TOTAL 2.93
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 366.90
Add 15% CPOH on "Y-A" TOTAL 41.57
Add Cess @ 1% on "Z-A" Cost of each 408.48
Say 50.62
459.10
3.88
462.98
463.00

17.35 Providing and fixing soil, waste and vent pipes :


17.35.1 100 mm dia
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


1617 Details of cost for 17.37 m (1.8mx10)-(9x0.07m) = 17.37 m MATERIAL each L.S. 10.50 1135.00 11917.50
9999 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100mm L.S. 80.73 2.12 171.15
9977 dia day day day 53.82 2.12 114.10
0116 Scaffolding 0.42 784.00 329.28
0100 Carriage of materials LABOUR 0.21 714.00 149.94
0114 Fitter (grade 1) Bandhani Beldar 0.83 645.00 535.35
TOTAL 13217.32
Add 1 % Water charges on "W" TOTAL 132.17
Add GST on "X" (multiplying factor 0.1405) TOTAL 13349.49
Add 15% CPOH on "Y" TOTAL 1875.60
Add Cess @ 1% on "Z" Cost for 17.37 m pan Cost per metre 15225.09
Say 2283.76
17508.86
175.09
17683.94
1018.07
1018.05

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


3620 Details of cost for 16.87 m (1.75mx10)-(9x0.07m) = 16.87 m MATERIAL each L.S. 10.50 1170.00 12285.00
9999 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm L.S. 80.73 2.12 171.15
9977 dia day day day 53.82 2.12 114.10
0116 Scaffolding 0.42 784.00 329.28
0100 Carriage of materials LABOUR 0.21 714.00 149.94
0114 Fitter (grade 1) Bandhani Beldar 0.83 645.00 535.35
TOTAL 13584.82
Add 1 % Water charges on "W" TOTAL 135.85
Add GST on "X" (multiplying factor 0.1405) TOTAL 13720.66
Add 15% CPOH on "Y" TOTAL 1927.75
Add Cess @ 1% on "Z" Cost for 16.87 m pan Cost per metre 15648.42
Say 2347.26
17995.68
179.96
18175.64
1077.39
1077.40
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


7621 Detail of cost for 18.00 m (6 x 3.00 m) MATERIAL metre L.S. 18.54 700.00 12978.00
9999 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia L.S. 80.73 2.12 171.15
9977 (3000 mm length pipe) day day day 53.82 2.12 114.10
0116 i/c (3% wastage) Scaffolding 0.42 784.00 329.28
0100 Carriage of materials LABOUR 0.21 714.00 149.94
0114 Fitter (grade 1) Bandhani Beldar 0.83 645.00 535.35
TOTAL 14277.82
Add 1 % Water charges on "W" TOTAL 142.78
Add GST on "X" (multiplying factor 0.1405) TOTAL 14420.59
Add 15% CPOH on "Y" TOTAL 2026.09
Add Cess @ 1% on "Z" Cost of 18.00 metre Cost of 1 metre 16446.69
Say 2467.00
18913.69
189.14
19102.83
1061.27
1061.25

17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


1616 Details of cost for 17.42 m each L.S. 10.50 1050.00 11025.00
9999 (1.8mx10)-(9x0.065m) = 17.415 m say 17.42 m MATERIAL L.S. 80.73 2.12 171.15
9977 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:75mm day day day 40.38 2.12 85.61
0116 dia 0.35 784.00 274.40
0100 Scaffolding 0.17 714.00 121.38
0114 Carriage of materials LABOUR 0.70 645.00 451.50
Fitter (grade 1) Bandhani Beldar 12129.03
TOTAL 121.29
Add 1 % Water charges on "W" TOTAL 12250.32
Add GST on "X" (multiplying factor 0.1405) TOTAL 1721.17
Add 15% CPOH on "Y" TOTAL 13971.49
Add Cess @ 1% on "Z" Cost for 17.42 m pan Cost per metre 2095.72
Say 16067.22
160.67
16227.89
931.57
931.55

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
3621 Details of cost for 16.92 m each L.S. 10.50 1150.00 12075.00
9999 (1.75mx10)-(9x0.065m) = 16.915 m. say 16.92 m MATERIAL L.S. 80.73 2.12 171.15
9977 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm day day day 40.38 2.12 85.61
0116 dia 0.35 784.00 274.40
0100 including 5% allowance for wastage Scaffolding 0.17 714.00 121.38
0114 Carriage of materials LABOUR 0.70 645.00 451.50
Fitter (grade 1) Bandhani Beldar 13179.03
TOTAL 131.79
Add 1 % Water charges on "W" TOTAL 13310.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 1870.17
Add 15% CPOH on "Y" TOTAL 15180.99
Add Cess @ 1% on "Z" Cost for 16.92 m pan Cost per metre 2277.15
Say 17458.14
174.58
17632.72
1042.12
1042.10

17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


7622 Detail of cost for 18.00 m (6 x 3.00 m) MATERIAL metre L.S. 18.54 570.00 10567.80
9999 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia L.S. 80.73 2.12 171.15
9977 (3000 mm length pipe) day day day 40.38 2.12 85.61
0116 i/c (3% wastage) Scaffolding 0.35 784.00 274.40
0100 Carriage of materials LABOUR 0.17 714.00 121.38
0114 Fitter (grade 1) Bandhani Beldar 0.70 645.00 451.50
TOTAL 11671.83
Add 1 % Water charges on "W" TOTAL 116.72
Add GST on "X" (multiplying factor 0.1405) TOTAL 11788.55
Add 15% CPOH on "Y" TOTAL 1656.29
Add Cess @ 1% on "Z" 13444.84
Cost of 18.00 metre 2016.73
15461.57
154.62
15616.19

Cost of 1 metre 867.57


Say 867.55
17.36 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
17.36.1 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Details of cost for 4 joints MATERIAL L.S. 6.89 2.12 14.61
0116 Cement mortar, spun yarn etc. LABOUR day day 0.28 784.00 219.52
0114 Fitter (grade 1) Beldar 0.28 645.00 180.60
TOTAL 414.73
Add 1 % Water charges on "W" TOTAL 4.15
Add GST on "X" (multiplying factor 0.1405) TOTAL 418.87
Add 15% CPOH on "Y" TOTAL 58.85
Add Cess @ 1% on "Z" Cost of 4 joints 477.73
Cost of 1 joint 71.66
Say 549.38
5.49
554.88
138.72
138.70

17.36.2 100 mm dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
9999 Details of cost for 4 joints MATERIAL L.S. 8.06 2.12 17.09
0116 Cement mortar, spun yarn etc. LABOUR day day 0.33 784.00 258.72
0114 Fitter (grade 1) Beldar 0.33 645.00 212.85
TOTAL 488.66
Add 1 % Water charges on "W" TOTAL 4.89
Add GST on "X" (multiplying factor 0.1405) TOTAL 493.54
Add 15% CPOH on "Y" TOTAL 69.34
Add Cess @ 1% on "Z" Cost of 4 joints 562.89
Cost of 1 joint 84.43
Say 647.32
6.47
653.79
163.45
163.45

17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cem
concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes
making good the walls etc. :
17.37.1 For 100 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


1331 Details of cost for 5 nos. MATERIAL each L.S. 5.00 30.00 150.00
9977 M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe day day day 2.47 2.12 5.24
0116 Carriage of bat clamps LABOUR L.S. 0.125 784.00 98.00
0124 Fitter (grade 1) cum cum cum 0.75 714.00 535.50
0114 Mason (brick layer) 2nd class Beldar cum cum tonne 0.50 645.00 322.50
9999 Sundries tonne day day 7.15 2.12 15.16
0295 Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate day day 0.0033 1400.00 4.62
0297 (Single size) : 10 mm nominal size Carriage of Stone aggregate below 40 day 0.0011 1350.00 1.49
2202 mm nominal size Coarse sand (zone III) 0.0044 163.93 0.72
0982 Carriage of Coarse sand Portland Cement (OPC-43 grade) Carriage of 0.0022 1500.00 3.30
2203 Cement 0.0022 163.93 0.36
0367 Beldar Coolie Bhisti 0.0016 5000.00 8.00
2209 Mason (brick layer) 1st class 0.0016 145.72 0.23
0114 Mason (brick layer) 2nd class 0.0045 645.00 2.90
0115 0.0032 645.00 2.06
0101 0.0014 714.00 1.00
0123 0.0003 784.00 0.24
0124 0.0003 714.00 0.21

0128 Mate day 0.0002 714.00 0.14


9999 Hire charges of machine etc. L.S. 0.26 2.12 0.55
9999 Sundries L.S. 0.13 2.12 0.28
9999 Sundries L.S. 0.13 2.12 0.28
TOTAL 1152.78
Add 1 % Water charges on "W" 11.53
TOTAL 1164.30
Add GST on "X" (multiplying factor 0.1405) 163.58
TOTAL 1327.89
Add 15% CPOH on "Y" 199.18
TOTAL 1527.07
Add Cess @ 1% on "Z" 15.27
Cost of 5.00 bat clamps 1542.34
Cost of each 308.47
Say 308.45
17.37.2 For 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 nos.
MATERIAL
1332 M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe
each 5.00 27.00 135.00
9977 Carriage of bat clamps L.S. 2.47 2.12 5.24
LABOUR
0116 Fitter (grade 1) day 0.125 784.00 98.00
0124 Mason (brick layer) 2nd class day 0.75 714.00 535.50
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 7.15 2.12 15.16
C.C. Black 5x0.1x0.1x0.1 = 0.005 cum
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.0033 1400.00 4.62
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.0011 1350.00 1.49
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.0044 163.93 0.72
0982 Coarse sand (zone III) cum 0.0022 1500.00 3.30
2203 Carriage of Coarse sand cum 0.0022 163.93 0.36
0367 Portland Cement (OPC-43 grade) tonne 0.0016 5000.00 8.00
2209 Carriage of Cement tonne 0.0016 145.72 0.23
0114 Beldar day 0.0045 645.00 2.90
0115 Coolie day 0.0032 645.00 2.06
0101 Bhisti day 0.0014 714.00 1.00
0123 Mason (brick layer) 1st class day 0.0003 784.00 0.24
0124 Mason (brick layer) 2nd class day 0.0003 714.00 0.21
0128 Mate day 0.0002 714.00 0.14
9999 Hire charges of machine etc. L.S. 0.26 2.12 0.55
9999 Sundries L.S. 0.13 2.12 0.28
9999 Sundries L.S. 0.13 2.12 0.28
TOTAL 1137.78
Add 1 % Water charges on "W" 11.38
TOTAL 1149.15
Add GST on "X" (multiplying factor 0.1405) 161.46
TOTAL 1310.61
Add 15% CPOH on "Y" 196.59
TOTAL 1507.20
Add Cess @ 1% on "Z" 15.07
Cost of 5.00 bat clamps 1522.27
Cost of each 304.45
Say 304.45
17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.38.1 100 mm dia
17.38.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1625 S.C.I. bend with access door 100mm dia each 1.00 350.00 350.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 396.66
Add 1 % Water charges on "W" 3.97
TOTAL 400.63
Add GST on "X" (multiplying factor 0.1405) 56.29
TOTAL 456.92
Add 15% CPOH on "Y" 68.54
TOTAL 525.46
Add Cess @ 1% on "Z" 5.25
Cost of each 530.71
Say 530.70
17.38.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3624 S.C.I. S&S bends with access door 100mm dia each 1.00 400.00 400.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 446.66
Add 1 % Water charges on "W" 4.47
TOTAL 451.13
Add GST on "X" (multiplying factor 0.1405) 63.38
TOTAL 514.51
Add 15% CPOH on "Y" 77.18
TOTAL 591.69
Add Cess @ 1% on "Z" 5.92
Cost of each 597.61
Say 597.60
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7639 Hubless centrifugally cast (spun) iron bend with access door -
100 mm dia as per IS IS:15905 each 1.00 365.00 365.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 411.66
Add 1 % Water charges on "W" 4.12
TOTAL 415.78
Add GST on "X" (multiplying factor 0.1405) 58.42
TOTAL 474.20
Add 15% CPOH on "Y" 71.13
TOTAL 545.33
Add Cess @ 1% on "Z" 5.45
Cost of each 550.78
Say 550.80

17.38.2 75 mm dia
17.38.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1624 S.C.I. bend with access door 75mm dia each 1.00 290.00 290.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 328.87
Add 1 % Water charges on "W" 3.29
TOTAL 332.16
Add GST on "X" (multiplying factor 0.1405) 46.67
TOTAL 378.83
Add 15% CPOH on "Y" 56.82
TOTAL 435.66
Add Cess @ 1% on "Z" 4.36
Cost of each 440.01
Say 440.00

17.38.2.2 Sand cast iron S&S as per IS- 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3625 S.C.I. S&S bends with access door75mm dia each 1.00 300.00 300.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 338.87
Add 1 % Water charges on "W" 3.39
TOTAL 342.26
Add GST on "X" (multiplying factor 0.1405) 48.09
TOTAL 390.35
Add 15% CPOH on "Y" 58.55
TOTAL 448.90
Add Cess @ 1% on "Z" 4.49
Cost of each 453.39
Say 453.40

17.38.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7640 Hubless centrifugally cast (spun) iron bend with access door -
75 mm dia as per IS 15905 including cost of bolts & nuts. each 1.00 290.00 290.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
3mm thick
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 328.87
Add 1 % Water charges on "W" 3.29
TOTAL 332.16
Add GST on "X" (multiplying factor 0.1405) 46.67
TOTAL 378.83
Add 15% CPOH on "Y" 56.82
TOTAL 435.66
Add Cess @ 1% on "Z" 4.36
Cost of each 440.01
Say 440.00
17.39 Providing and fixing plain bend of required degree.
17.39.1 100 mm dia
17.39.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1621 S.C.I. plain bend 100 mm dia each 1.00 280.00 280.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 308.66
Add 1 % Water charges on "W" 3.09
TOTAL 311.75
Add GST on "X" (multiplying factor 0.1405) 43.80
TOTAL 355.55
Add 15% CPOH on "Y" 53.33
TOTAL 408.88
Add Cess @ 1% on "Z" 4.09
Cost of each 412.97
Say 412.95
17.39.1.2 Sand cast iron S&S as per IS : 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3628 S.C.I. S&S bend100mm dia each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 328.66
Add 1 % Water charges on "W" 3.29
TOTAL 331.95
Add GST on "X" (multiplying factor 0.1405) 46.64
TOTAL 378.59
Add 15% CPOH on "Y" 56.79
TOTAL 435.38
Add Cess @ 1% on "Z" 4.35
Cost of each 439.73
Say 439.75

17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7623 Hubless centrifugally cast (spun) iron plain bend as per IS 15905
100 mm dia each 1.00 230.00 230.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 258.66
Add 1 % Water charges on "W" 2.59
TOTAL 261.25
Add GST on "X" (multiplying factor 0.1405) 36.71
TOTAL 297.95
Add 15% CPOH on "Y" 44.69
TOTAL 342.65
Add Cess @ 1% on "Z" 3.43
Cost of each 346.07
Say 346.05
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS -1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1620 S.C.I. plain bend 75 mm dia each 1.00 210.00 210.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 232.87
Add 1 % Water charges on "W" 2.33
TOTAL 235.20
Add GST on "X" (multiplying factor 0.1405) 33.05
TOTAL 268.25
Add 15% CPOH on "Y" 40.24
TOTAL 308.49
Add Cess @ 1% on "Z" 3.08
Cost of each 311.57
Say 311.55
17.39.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3629 S.C.I. S&S bend75mm dia each 1.00 200.00 200.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 222.87
Add 1 % Water charges on "W" 2.23
TOTAL 225.10
Add GST on "X" (multiplying factor 0.1405) 31.63
TOTAL 256.73
Add 15% CPOH on "Y" 38.51
TOTAL 295.24
Add Cess @ 1% on "Z" 2.95
Cost of each 298.19
Say 298.20

17.39.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one no.
MATERIAL
7624 Hubless centrifugally cast (spun) iron plain bend as per IS 15905
- 75 mm dia each 1.00 160.00 160.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 182.87
Add 1 % Water charges on "W" 1.83
TOTAL 184.70
Add GST on "X" (multiplying factor 0.1405) 25.95
TOTAL 210.65
Add 15% CPOH on "Y" 31.60
TOTAL 242.25
Add Cess @ 1% on "Z" 2.42
Cost of each 244.68
Say 244.70
17.40 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia
17.40.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1667 Sand cast iron heel rest bend 100mm dia each 1.00 355.00 355.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 383.66
Add 1 % Water charges on "W" 3.84
TOTAL 387.50
Add GST on "X" (multiplying factor 0.1405) 54.44
TOTAL 441.94
Add 15% CPOH on "Y" 66.29
TOTAL 508.23
Add Cess @ 1% on "Z" 5.08
Cost of each 513.32
Say 513.30
17.40.1.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3634 S.C.I. S&S heel rest sanitary bend 100mm dia each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 328.66
Add 1 % Water charges on "W" 3.29
TOTAL 331.95
Add GST on "X" (multiplying factor 0.1405) 46.64
TOTAL 378.59
Add 15% CPOH on "Y" 56.79
TOTAL 435.38
Add Cess @ 1% on "Z" 4.35
Cost of each 439.73
Say 439.75
17.40.2 75 mm dia
17.40.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1666 Sand cast iron heel rest bend75mm dia each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 322.87
Add 1 % Water charges on "W" 3.23
TOTAL 326.10
Add GST on "X" (multiplying factor 0.1405) 45.82
TOTAL 371.92
Add 15% CPOH on "Y" 55.79
TOTAL 427.71
Add Cess @ 1% on "Z" 4.28
Cost of each 431.99
Say 432.00

17.40.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3635 S.C.I. S&S heel rest sanitary bend 75mm dia each 1.00 280.00 280.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 302.87
Add 1 % Water charges on "W" 3.03
TOTAL 305.90
Add GST on "X" (multiplying factor 0.1405) 42.98
TOTAL 348.88
Add 15% CPOH on "Y" 52.33
TOTAL 401.22
Add Cess @ 1% on "Z" 4.01
Cost of each 405.23
Say 405.25
17.41 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts com
:
17.41.1 100x100x100x100 mm
17.41.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with
access door. each 1.00 730.00 730.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 776.39
Add 1 % Water charges on "W" 7.76
TOTAL 784.15
Add GST on "X" (multiplying factor 0.1405) 110.17
TOTAL 894.32
Add 15% CPOH on "Y" 134.15
TOTAL 1028.47
Add Cess @ 1% on "Z" 10.28
Cost of each 1038.76
Say 1038.75
17.41.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3654 S.C.I. S&S double equal junctions with access door
100x100x100x100 mm. each 1.00 630.00 630.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.39 2.12 28.39
TOTAL 676.39
Add 1 % Water charges on "W" 6.76
TOTAL 683.15
Add GST on "X" (multiplying factor 0.1405) 95.98
TOTAL 779.13
Add 15% CPOH on "Y" 116.87
TOTAL 896.00
Add Cess @ 1% on "Z" 8.96
Cost of each 904.96
Say 904.95

17.41.2 75x75x75x75 mm
17.41.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1636 S.C.I. double equal junctions75x75x75x75 mm dia with access
door. each 1.00 525.00 525.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 563.87
Add 1 % Water charges on "W" 5.64
TOTAL 569.51
Add GST on "X" (multiplying factor 0.1405) 80.02
TOTAL 649.53
Add 15% CPOH on "Y" 97.43
TOTAL 746.96
Add Cess @ 1% on "Z" 7.47
Cost of each 754.43
Say 754.45

17.41.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3655 S.C.I. S&S double equal junctions with access door
75x75x75x75 mm. each 1.00 500.00 500.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 538.87
Add 1 % Water charges on "W" 5.39
TOTAL 544.26
Add GST on "X" (multiplying factor 0.1405) 76.47
TOTAL 620.73
Add 15% CPOH on "Y" 93.11
TOTAL 713.84
Add Cess @ 1% on "Z" 7.14
Cost of each 720.98
Say 721.00
17.42 Providing and fixing double equal plain junction of required degree.
17.42.1 100x100x100x100 mm
17.42.1.1 Sand cast iron S&S as per IS - 1729
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia
each 1.00 615.00 615.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 643.66
Add 1 % Water charges on "W" 6.44
TOTAL 650.10
Add GST on "X" (multiplying factor 0.1405) 91.34
TOTAL 741.44
Add 15% CPOH on "Y" 111.22
TOTAL 852.65
Add Cess @ 1% on "Z" 8.53
Cost of each 861.18
Say 861.20

17.42.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm each 1.00 630.00 630.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 658.66
Add 1 % Water charges on "W" 6.59
TOTAL 665.25
Add GST on "X" (multiplying factor 0.1405) 93.47
TOTAL 758.72
Add 15% CPOH on "Y" 113.81
TOTAL 872.52
Add Cess @ 1% on "Z" 8.73
Cost of each 881.25
Say 881.25

17.42.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7625 Hubless centrifugally cast (spun) iron double equal plain junction
as per IS 15905 - 100x100x100x100 mm dia each 1.00 510.00 510.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 538.66
Add 1 % Water charges on "W" 5.39
TOTAL 544.05
Add GST on "X" (multiplying factor 0.1405) 76.44
TOTAL 620.49
Add 15% CPOH on "Y" 93.07
TOTAL 713.56
Add Cess @ 1% on "Z" 7.14
Cost of each 720.70
Say 720.70
17.42.2 75x75x75x75 mm
17.42.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 1.00 410.00 410.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 432.87
Add 1 % Water charges on "W" 4.33
TOTAL 437.20
Add GST on "X" (multiplying factor 0.1405) 61.43
TOTAL 498.63
Add 15% CPOH on "Y" 74.79
TOTAL 573.43
Add Cess @ 1% on "Z" 5.73
Cost of each 579.16
Say 579.15

17.42.2.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm each 1.00 470.00 470.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 492.87
Add 1 % Water charges on "W" 4.93
TOTAL 497.80
Add GST on "X" (multiplying factor 0.1405) 69.94
TOTAL 567.74
Add 15% CPOH on "Y" 85.16
TOTAL 652.91
Add Cess @ 1% on "Z" 6.53
Cost of each 659.44
Say 659.45

17.42.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7626 Hubless centrifugally cast (spun) iron double equal plain junction
as per IS 15905 - 75x75x75x75 mm dia each 1.00 275.00 275.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 297.87
Add 1 % Water charges on "W" 2.98
TOTAL 300.85
Add GST on "X" (multiplying factor 0.1405) 42.27
TOTAL 343.12
Add 15% CPOH on "Y" 51.47
TOTAL 394.59
Add Cess @ 1% on "Z" 3.95
Cost of each 398.54
Say 398.55
17.43 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete.

17.43.1 100x100x100 mm
17.43.1.1 Sand cast iron S&S as per IS - 1729
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1631 S.C.I. single equal junctions 100x100x100 mm dia with access
door. each 1.00 455.00 455.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 501.66
Add 1 % Water charges on "W" 5.02
TOTAL 506.68
Add GST on "X" (multiplying factor 0.1405) 71.19
TOTAL 577.87
Add 15% CPOH on "Y" 86.68
TOTAL 664.55
Add Cess @ 1% on "Z" 6.65
Cost of each 671.19
Say 671.20

17.43.1.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3644 S.C.I. S&S single equal junctions with access door
100x100x100 mm each 1.00 500.00 500.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 546.66
Add 1 % Water charges on "W" 5.47
TOTAL 552.13
Add GST on "X" (multiplying factor 0.1405) 77.57
TOTAL 629.70
Add 15% CPOH on "Y" 94.46
TOTAL 724.16
Add Cess @ 1% on "Z" 7.24
Cost of each 731.40
Say 731.40

17.43.2 75x75x75 mm
17.43.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1630 S.C.I. single equal junctions75x75x75 mm dia with access door.
each 1.00 390.00 390.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 428.87
Add 1 % Water charges on "W" 4.29
TOTAL 433.16
Add GST on "X" (multiplying factor 0.1405) 60.86
TOTAL 494.02
Add 15% CPOH on "Y" 74.10
TOTAL 568.13
Add Cess @ 1% on "Z" 5.68
Cost of each 573.81
Say 573.80
17.43.2.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3645 S.C.I. S&S single equal junctions with access door 75x75x75
mm each 1.00 390.00 390.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 428.87
Add 1 % Water charges on "W" 4.29
TOTAL 433.16
Add GST on "X" (multiplying factor 0.1405) 60.86
TOTAL 494.02
Add 15% CPOH on "Y" 74.10
TOTAL 568.13
Add Cess @ 1% on "Z" 5.68
Cost of each 573.81
Say 573.80
17.44 Providing and fixing single equal plain junction of required degree :
17.44.1 100x100x100 mm
17.44.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1628 S.C.I. plain single equal junctions 100x100x100 mm dia each 1.00 405.00 405.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 433.66
Add 1 % Water charges on "W" 4.34
TOTAL 438.00
Add GST on "X" (multiplying factor 0.1405) 61.54
TOTAL 499.54
Add 15% CPOH on "Y" 74.93
TOTAL 574.47
Add Cess @ 1% on "Z" 5.74
Cost of each 580.21
Say 580.20

17.44.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3640 S.C.I. S&S single equal junctions 100x100x100 mm each 1.00 500.00 500.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 528.66
Add 1 % Water charges on "W" 5.29
TOTAL 533.95
Add GST on "X" (multiplying factor 0.1405) 75.02
TOTAL 608.97
Add 15% CPOH on "Y" 91.35
TOTAL 700.31
Add Cess @ 1% on "Z" 7.00
Cost of each 707.32
Say 707.30

17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7627 Hubless centrifugally cast (spun) iron single equal plain junction
as per IS 15905 - 100x100x100 mm dia each 1.00 400.00 400.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 428.66
Add 1 % Water charges on "W" 4.29
TOTAL 432.95
Add GST on "X" (multiplying factor 0.1405) 60.83
TOTAL 493.78
Add 15% CPOH on "Y" 74.07
TOTAL 567.85
Add Cess @ 1% on "Z" 5.68
Cost of each 573.52
Say 573.50
17.44.2 75x75x75 mm
17.44.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1627 S.C.I. plain single equal junctions 75x75x75 mm dia each 1.00 315.00 315.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 337.87
Add 1 % Water charges on "W" 3.38
TOTAL 341.25
Add GST on "X" (multiplying factor 0.1405) 47.95
TOTAL 389.20
Add 15% CPOH on "Y" 58.38
TOTAL 447.58
Add Cess @ 1% on "Z" 4.48
Cost of each 452.06
Say 452.05

17.44.2.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3641 S.C.I. S&S single equal junctions 75x75x75 mm each 1.00 350.00 350.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 372.87
Add 1 % Water charges on "W" 3.73
TOTAL 376.60
Add GST on "X" (multiplying factor 0.1405) 52.91
TOTAL 429.52
Add 15% CPOH on "Y" 64.43
TOTAL 493.94
Add Cess @ 1% on "Z" 4.94
Cost of each 498.88
Say 498.90

17.44.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7628 Hubless centrifugally cast (spun) iron single equal plain junction
as per IS 15905 - 75x75x75 mm dia each 1.00 215.00 215.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 237.87
Add 1 % Water charges on "W" 2.38
TOTAL 240.25
Add GST on "X" (multiplying factor 0.1405) 33.76
TOTAL 274.01
Add 15% CPOH on "Y" 41.10
TOTAL 315.11
Add Cess @ 1% on "Z" 3.15
Cost of each 318.26
Say 318.25
17.45 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
17.45.1 100x100x75x75 mm
17.45.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1662 Sand cast iron S&S double unequal junctions: 100x100x75x75
mm dia with access door. each 1.00 725.00 725.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 771.66
Add 1 % Water charges on "W" 7.72
TOTAL 779.38
Add GST on "X" (multiplying factor 0.1405) 109.50
TOTAL 888.88
Add 15% CPOH on "Y" 133.33
TOTAL 1022.21
Add Cess @ 1% on "Z" 10.22
Cost of each 1032.44
Say 1032.45

17.45.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3674 S.C.I. S&S double unequal junctions with access door
100x100x75x75 mm each 1.00 900.00 900.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 946.66
Add 1 % Water charges on "W" 9.47
TOTAL 956.13
Add GST on "X" (multiplying factor 0.1405) 134.34
TOTAL 1090.47
Add 15% CPOH on "Y" 163.57
TOTAL 1254.03
Add Cess @ 1% on "Z" 12.54
Cost of each 1266.58
Say 1266.60
17.46 Providing and fixing double unequal plain junction of required degree :
17.46.1 100x100x75x75 mm
17.46.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1659 Sand cast iron S&S plain double unequal junctions :
100x100x75x75 mm dia each 1.00 625.00 625.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 653.66
Add 1 % Water charges on "W" 6.54
TOTAL 660.20
Add GST on "X" (multiplying factor 0.1405) 92.76
TOTAL 752.96
Add 15% CPOH on "Y" 112.94
TOTAL 865.90
Add Cess @ 1% on "Z" 8.66
Cost of each 874.56
Say 874.55

17.46.1.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm each 1.00 800.00 800.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 828.66
Add 1 % Water charges on "W" 8.29
TOTAL 836.95
Add GST on "X" (multiplying factor 0.1405) 117.59
TOTAL 954.54
Add 15% CPOH on "Y" 143.18
TOTAL 1097.72
Add Cess @ 1% on "Z" 10.98
Cost of each 1108.70
Say 1108.70

17.46.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7629 Hubless centrifugally cast (spun) iron double unequal plain
junction as per IS 15905 - 100x100x75x75 mm dia each 1.00 400.00 400.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 428.66
Add 1 % Water charges on "W" 4.29
TOTAL 432.95
Add GST on "X" (multiplying factor 0.1405) 60.83
TOTAL 493.78
Add 15% CPOH on "Y" 74.07
TOTAL 567.85
Add Cess @ 1% on "Z" 5.68
Cost of each 573.52
Say 573.50
17.47 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.47.1 100x100x75 mm
17.47.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm
dia with access door. each 1.00 575.00 575.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 621.66
Add 1 % Water charges on "W" 6.22
TOTAL 627.88
Add GST on "X" (multiplying factor 0.1405) 88.22
TOTAL 716.10
Add 15% CPOH on "Y" 107.41
TOTAL 823.51
Add Cess @ 1% on "Z" 8.24
Cost of each 831.75
Say 831.75

17.47.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3664 S.C.I. S&S single unequal junctions with access door
100x100x75 mm each 1.00 650.00 650.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 696.66
Add 1 % Water charges on "W" 6.97
TOTAL 703.63
Add GST on "X" (multiplying factor 0.1405) 98.86
TOTAL 802.49
Add 15% CPOH on "Y" 120.37
TOTAL 922.86
Add Cess @ 1% on "Z" 9.23
Cost of each 932.09
Say 932.10
17.48 Providing and fixing single unequal plain junction of required degree :
17.48.1 100x100x75 mm
17.48.1.1 Sand cast iron S&S as per IS - 1729
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1653 Sand cast iron S&S plain single unequal junctions : 100x100x75
mm dia each 1.00 525.00 525.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 553.66
Add 1 % Water charges on "W" 5.54
TOTAL 559.20
Add GST on "X" (multiplying factor 0.1405) 78.57
TOTAL 637.77
Add 15% CPOH on "Y" 95.66
TOTAL 733.43
Add Cess @ 1% on "Z" 7.33
Cost of each 740.77
Say 740.75
17.48.1.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 1.00 600.00 600.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 628.66
Add 1 % Water charges on "W" 6.29
TOTAL 634.95
Add GST on "X" (multiplying factor 0.1405) 89.21
TOTAL 724.16
Add 15% CPOH on "Y" 108.62
TOTAL 832.78
Add Cess @ 1% on "Z" 8.33
Cost of each 841.11
Say 841.10

17.48.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7630 Hubless centrifugally cast (spun) iron single unequal plain
junction as per IS 15905 - 100x100x75 mm dia each 1.00 375.00 375.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 403.66
Add 1 % Water charges on "W" 4.04
TOTAL 407.70
Add GST on "X" (multiplying factor 0.1405) 57.28
TOTAL 464.98
Add 15% CPOH on "Y" 69.75
TOTAL 534.73
Add Cess @ 1% on "Z" 5.35
Cost of each 540.08
Say 540.10
17.49 Providing and fixing double equal plain invert branch of required degree: 17.49.1 100x100x100x100 mm
17.49.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1673 S.C.I. double equal invert branch of required degree
100x100x100x100 mm dia each 1.00 550.00 550.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 578.66
Add 1 % Water charges on "W" 5.79
TOTAL 584.45
Add GST on "X" (multiplying factor 0.1405) 82.12
TOTAL 666.56
Add 15% CPOH on "Y" 99.98
TOTAL 766.55
Add Cess @ 1% on "Z" 7.67
Cost of each 774.21
Say 774.20

17.49.1.2 Sand cast iron S&S as per IS 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3685 S.C.I. S&S double equal invert branch of required
degree100x100x100x100 mm dia each 1.00 540.00 540.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 568.66
Add 1 % Water charges on "W" 5.69
TOTAL 574.35
Add GST on "X" (multiplying factor 0.1405) 80.70
TOTAL 655.05
Add 15% CPOH on "Y" 98.26
TOTAL 753.30
Add Cess @ 1% on "Z" 7.53
Cost of each 760.83
Say 760.85
17.49.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7631 Hubless centrifugally cast (spun) iron double equal plain invert
branch as per IS 15905 - 100x100x100x100 mm dia each 1.00 625.00 625.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 653.66
Add 1 % Water charges on "W" 6.54
TOTAL 660.20
Add GST on "X" (multiplying factor 0.1405) 92.76
TOTAL 752.96
Add 15% CPOH on "Y" 112.94
TOTAL 865.90
Add Cess @ 1% on "Z" 8.66
Cost of each 874.56
Say 874.55
17.49.2 75x75x75x75 mm
17.49.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1672 S.C.I. double equal invert branch of required degree
75x75x75x75 mm dia each 1.00 425.00 425.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 447.87
Add 1 % Water charges on "W" 4.48
TOTAL 452.35
Add GST on "X" (multiplying factor 0.1405) 63.56
TOTAL 515.91
Add 15% CPOH on "Y" 77.39
TOTAL 593.30
Add Cess @ 1% on "Z" 5.93
Cost of each 599.23
Say 599.25

17.49.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3686 S.C.I. S&S double equal invert branch of required degree
75x75x75x75 mm dia each 1.00 450.00 450.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 472.87
Add 1 % Water charges on "W" 4.73
TOTAL 477.60
Add GST on "X" (multiplying factor 0.1405) 67.10
TOTAL 544.71
Add 15% CPOH on "Y" 81.71
TOTAL 626.41
Add Cess @ 1% on "Z" 6.26
Cost of each 632.68
Say 632.70
17.50 Providing and fixing single equal plain invert branch of required degree :
17.50.1 100x100x100 mm
17.50.1.1 Sand cast iron S&S as per iron 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1670 S.C.I. single equal invert branch of required degree
100x100x100 mm dia each 1.00 435.00 435.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 463.66
Add 1 % Water charges on "W" 4.64
TOTAL 468.30
Add GST on "X" (multiplying factor 0.1405) 65.80
TOTAL 534.10
Add 15% CPOH on "Y" 80.11
TOTAL 614.21
Add Cess @ 1% on "Z" 6.14
Cost of each 620.35
Say 620.35
17.50.1.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3681 S.C.I. S&S single equal invert branch of required degree
100x100x100 mm dia each 1.00 430.00 430.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 458.66
Add 1 % Water charges on "W" 4.59
TOTAL 463.25
Add GST on "X" (multiplying factor 0.1405) 65.09
TOTAL 528.34
Add 15% CPOH on "Y" 79.25
TOTAL 607.59
Add Cess @ 1% on "Z" 6.08
Cost of each 613.66
Say 613.65

17.50.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7632 Hubless centrifugally cast (spun) iron single equal plain invert
branch as per IS 15905 - 100x100x100 mm dia each 1.00 390.00 390.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 418.66
Add 1 % Water charges on "W" 4.19
TOTAL 422.85
Add GST on "X" (multiplying factor 0.1405) 59.41
TOTAL 482.26
Add 15% CPOH on "Y" 72.34
TOTAL 554.60
Add Cess @ 1% on "Z" 5.55
Cost of each 560.14
Say 560.15

17.50.2 75x75x75 mm
17.50.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1669 S.C.I. single equal invert branch of required degree75x75x75
mm dia each 1.00 350.00 350.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 372.87
Add 1 % Water charges on "W" 3.73
TOTAL 376.60
Add GST on "X" (multiplying factor 0.1405) 52.91
TOTAL 429.52
Add 15% CPOH on "Y" 64.43
TOTAL 493.94
Add Cess @ 1% on "Z" 4.94
Cost of each 498.88
Say 498.90

17.50.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3682 S.C.I. S&S single equal invert branch of required degree
75x75x75 mm dia each 1.00 330.00 330.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 352.87
Add 1 % Water charges on "W" 3.53
TOTAL 356.40
Add GST on "X" (multiplying factor 0.1405) 50.07
TOTAL 406.48
Add 15% CPOH on "Y" 60.97
TOTAL 467.45
Add Cess @ 1% on "Z" 4.67
Cost of each 472.12
Say 472.10
17.50.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one no.
MATERIAL
7633 Hubless centrifugally cast (spun) iron single equal plain invert
branch as per IS 15905 - 75x75x75 mm dia each 1.00 260.00 260.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 282.87
Add 1 % Water charges on "W" 2.83
TOTAL 285.70
Add GST on "X" (multiplying factor 0.1405) 40.14
TOTAL 325.84
Add 15% CPOH on "Y" 48.88
TOTAL 374.72
Add Cess @ 1% on "Z" 3.75
Cost of each 378.47
Say 378.45
17.51 Providing and fixing double unequal invert branch of required degree :
17.51.1 100x100x75x75 mm
17.51.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1677 S.C.I. double unequal invert branch of required degree
100x100x75x75 mm dia each 1.00 600.00 600.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 628.66
Add 1 % Water charges on "W" 6.29
TOTAL 634.95
Add GST on "X" (multiplying factor 0.1405) 89.21
TOTAL 724.16
Add 15% CPOH on "Y" 108.62
TOTAL 832.78
Add Cess @ 1% on "Z" 8.33
Cost of each 841.11
Say 841.10

17.51.1.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3695 S.C.I. S&S double unequal invert branch of required
degree100x100x75x75 mm dia each 1.00 730.00 730.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 758.66
Add 1 % Water charges on "W" 7.59
TOTAL 766.25
Add GST on "X" (multiplying factor 0.1405) 107.66
TOTAL 873.91
Add 15% CPOH on "Y" 131.09
TOTAL 1004.99
Add Cess @ 1% on "Z" 10.05
Cost of each 1015.04
Say 1015.05
17.52 Providing and fixing single unequal plain invert branch of required degree :
17.52.1 100x100x75 mm
17.52.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1674 S.C.I. single unequal invert branch of required
degree100x100x75 mm dia each 1.00 500.00 500.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 528.66
Add 1 % Water charges on "W" 5.29
TOTAL 533.95
Add GST on "X" (multiplying factor 0.1405) 75.02
TOTAL 608.97
Add 15% CPOH on "Y" 91.35
TOTAL 700.31
Add Cess @ 1% on "Z" 7.00
Cost of each 707.32
Say 707.30
17.52.1.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3690 S.C.I. S&S single unequal invert branch of required
degree100x100x75 mm dia each 1.00 550.00 550.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 578.66
Add 1 % Water charges on "W" 5.79
TOTAL 584.45
Add GST on "X" (multiplying factor 0.1405) 82.12
TOTAL 666.56
Add 15% CPOH on "Y" 99.98
TOTAL 766.55
Add Cess @ 1% on "Z" 7.67
Cost of each 774.21
Say 774.20

17.52.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7634 Hubless centrifugally cast (spun) iron single unequal plain invert
branch 45 degree as per IS 15905 - 100x100x75 mm dia
each 1.00 430.00 430.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 458.66
Add 1 % Water charges on "W" 4.59
TOTAL 463.25
Add GST on "X" (multiplying factor 0.1405) 65.09
TOTAL 528.34
Add 15% CPOH on "Y" 79.25
TOTAL 607.59
Add Cess @ 1% on "Z" 6.08
Cost of each 613.66
Say 613.65
17.53 Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1 76 mm off sets
17.53.1.1 With 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 1.00 220.00 220.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 242.87
Add 1 % Water charges on "W" 2.43
TOTAL 245.30
Add GST on "X" (multiplying factor 0.1405) 34.47
TOTAL 279.77
Add 15% CPOH on "Y" 41.97
TOTAL 321.73
Add Cess @ 1% on "Z" 3.22
Cost of each 324.95
Say 324.95

17.53.1.2 With 100 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3747 S.C.I. S&S, 75 mm offset for 100 mm dia pipe each 1.00 360.00 360.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 382.87
Add 1 % Water charges on "W" 3.83
TOTAL 386.70
Add GST on "X" (multiplying factor 0.1405) 54.33
TOTAL 441.04
Add 15% CPOH on "Y" 66.16
TOTAL 507.19
Add Cess @ 1% on "Z" 5.07
Cost of each 512.26
Say 512.25
17.53.2 114 mm off sets
17.53.2.1 With 75 mm dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3712 S.C.I. S&S, 114 mm offset for75 mm dia pipe each 1.00 310.00 310.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 338.66
Add 1 % Water charges on "W" 3.39
TOTAL 342.05
Add GST on "X" (multiplying factor 0.1405) 48.06
TOTAL 390.11
Add 15% CPOH on "Y" 58.52
TOTAL 448.62
Add Cess @ 1% on "Z" 4.49
Cost of each 453.11
Say 453.10

17.53.2.2 With 100 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3713 S.C.I. S&S, 114 mm offset for100 mm dia pipe each 1.00 390.00 390.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 418.66
Add 1 % Water charges on "W" 4.19
TOTAL 422.85
Add GST on "X" (multiplying factor 0.1405) 59.41
TOTAL 482.26
Add 15% CPOH on "Y" 72.34
TOTAL 554.60
Add Cess @ 1% on "Z" 5.55
Cost of each 560.14
Say 560.15

17.53.3 152 mm off sets


17.53.3.1 With 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3716 S.C.I. S&S, 152 mm offset for75 mm dia pipe each 1.00 360.00 360.00
9988 Carriage of materials and fixing charges L.S. 17.94 2.12 38.03
TOTAL 398.03
Add 1 % Water charges on "W" 3.98
TOTAL 402.01
Add GST on "X" (multiplying factor 0.1405) 56.48
TOTAL 458.50
Add 15% CPOH on "Y" 68.77
TOTAL 527.27
Add Cess @ 1% on "Z" 5.27
Cost of each 532.54
Say 532.55

17.53.3.2 With 100 mm dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3717 S.C.I. S&S, 152 mm offset for100 mm dia pipe each 1.00 460.00 460.00
9988 Carriage of materials and fixing charges L.S. 17.94 2.12 38.03
TOTAL 498.03
Add 1 % Water charges on "W" 4.98
TOTAL 503.01
Add GST on "X" (multiplying factor 0.1405) 70.67
TOTAL 573.69
Add 15% CPOH on "Y" 86.05
TOTAL 659.74
Add Cess @ 1% on "Z" 6.60
Cost of each 666.34
Say 666.35

17.53A Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
17.53A.1 65 mm offsets
17.53A.1.1 With 100 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7635 Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm
dia pipe as per IS 15905 each 1.00 360.00 360.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 382.87
Add 1 % Water charges on "W" 3.83
TOTAL 386.70
Add GST on "X" (multiplying factor 0.1405) 54.33
TOTAL 441.04
Add 15% CPOH on "Y" 66.16
TOTAL 507.19
Add Cess @ 1% on "Z" 5.07
Cost of each 512.26
Say 512.25

17.53A.1.2 With 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7636 Hubless centrifugally cast (spun) iron 65 mm offset with 75 mm
dia pipe as per IS 15905 each 1.00 295.00 295.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 317.87
Add 1 % Water charges on "W" 3.18
TOTAL 321.05
Add GST on "X" (multiplying factor 0.1405) 45.11
TOTAL 366.16
Add 15% CPOH on "Y" 54.92
TOTAL 421.09
Add Cess @ 1% on "Z" 4.21
Cost of each 425.30
Say 425.30
17.54 Providing and fixing sand cast iron S&S off sets as per IS: 3989 :
17.54.1 75 mm off sets
17.54.1.1 With 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3699 S.C.I. S&S, 75 mm offset for75 mm dia pipe each 1.00 230.00 230.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 252.87
Add 1 % Water charges on "W" 2.53
TOTAL 255.40
Add GST on "X" (multiplying factor 0.1405) 35.88
TOTAL 291.29
Add 15% CPOH on "Y" 43.69
TOTAL 334.98
Add Cess @ 1% on "Z" 3.35
Cost of each 338.33
Say 338.35
17.54.2 150 mm off sets
17.54.2.1 With 75 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3707 S.C.I. S&S, 150 mm offset for75 mm dia pipe each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 16.12 2.12 34.17
TOTAL 334.17
Add 1 % Water charges on "W" 3.34
TOTAL 337.52
Add GST on "X" (multiplying factor 0.1405) 47.42
TOTAL 384.94
Add 15% CPOH on "Y" 57.74
TOTAL 442.68
Add Cess @ 1% on "Z" 4.43
Cost of each 447.10
Say 447.10

17.54.2.2 With 100 mm dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3708 S.C.I. S&S, 150 mm offset for 100 mm dia pipe each 1.00 400.00 400.00
9988 Carriage of materials and fixing charges L.S. 16.12 2.12 34.17
TOTAL 434.17
Add 1 % Water charges on "W" 4.34
TOTAL 438.52
Add GST on "X" (multiplying factor 0.1405) 61.61
TOTAL 500.13
Add 15% CPOH on "Y" 75.02
TOTAL 575.15
Add Cess @ 1% on "Z" 5.75
Cost of each 580.90
Say 580.90
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
17.54A

17.54A.1 130 mm offsets


17.54A.1.1 With 100 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one no.
MATERIAL
7637 Hubless centrifugally cast (spun) iron 130 mm offset with 100
mm dia pipe as per IS 15905 each 1.00 440.00 440.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 468.66
Add 1 % Water charges on "W" 4.69
TOTAL 473.35
Add GST on "X" (multiplying factor 0.1405) 66.51
TOTAL 539.85
Add 15% CPOH on "Y" 80.98
TOTAL 620.83
Add Cess @ 1% on "Z" 6.21
Cost of each 627.04
Say 627.05
17.54A.1.2 With 75 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7638 Hubless centrifugally cast (spun) iron 130 mm offset with 75 mm
dia pipe as per IS 15905 each 1.00 310.00 310.00
9999 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 332.87
Add 1 % Water charges on "W" 3.33
TOTAL 336.20
Add GST on "X" (multiplying factor 0.1405) 47.24
TOTAL 383.44
Add 15% CPOH on "Y" 57.52
TOTAL 440.96
Add Cess @ 1% on "Z" 4.41
Cost of each 445.37
Say 445.35
17.55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :
17.55.1 100 mm
17.55.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1683 S.C.I. door pieces 100 mm dia each 1.00 485.00 485.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 531.66
Add 1 % Water charges on "W" 5.32
TOTAL 536.98
Add GST on "X" (multiplying factor 0.1405) 75.45
TOTAL 612.42
Add 15% CPOH on "Y" 91.86
TOTAL 704.29
Add Cess @ 1% on "Z" 7.04
Cost of each 711.33
Say 711.35

17.55.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3728 S.C.I. S&S door pieces 100 mm dia each 1.00 410.00 410.00
1374 Rubber insertions for 100 mm dia pipe joints each 1.00 18.00 18.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 456.66
Add 1 % Water charges on "W" 4.57
TOTAL 461.23
Add GST on "X" (multiplying factor 0.1405) 64.80
TOTAL 526.03
Add 15% CPOH on "Y" 78.90
TOTAL 604.94
Add Cess @ 1% on "Z" 6.05
Cost of each 610.99
Say 611.00
17.55.2 75 mm
17.55.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1682 S.C.I. door pieces 75 mm dia each 1.00 285.00 285.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 323.87
Add 1 % Water charges on "W" 3.24
TOTAL 327.11
Add GST on "X" (multiplying factor 0.1405) 45.96
TOTAL 373.07
Add 15% CPOH on "Y" 55.96
TOTAL 429.03
Add Cess @ 1% on "Z" 4.29
Cost of each 433.32
Say 433.30

17.55.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3729 S.C.I. S&S door pieces 75 mm dia each 1.00 300.00 300.00
1373 Rubber insertions for 80 mm dia pipe joints each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 338.87
Add 1 % Water charges on "W" 3.39
TOTAL 342.26
Add GST on "X" (multiplying factor 0.1405) 48.09
TOTAL 390.35
Add 15% CPOH on "Y" 58.55
TOTAL 448.90
Add Cess @ 1% on "Z" 4.49
Cost of each 453.39
Say 453.40
17.56 Providing and fixing terminal guard :
17.56.1 100 mm
17.56.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1640 Slotted cowl (terminal guard ) 100 mm dia each 1.00 265.00 265.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 293.66
Add 1 % Water charges on "W" 2.94
TOTAL 296.60
Add GST on "X" (multiplying factor 0.1405) 41.67
TOTAL 338.27
Add 15% CPOH on "Y" 50.74
TOTAL 389.01
Add Cess @ 1% on "Z" 3.89
Cost of each 392.90
Say 392.90
17.56.1.2 Sand cast iron S&S as per IS - 3989
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 328.66
Add 1 % Water charges on "W" 3.29
TOTAL 331.95
Add GST on "X" (multiplying factor 0.1405) 46.64
TOTAL 378.59
Add 15% CPOH on "Y" 56.79
TOTAL 435.38
Add Cess @ 1% on "Z" 4.35
Cost of each 439.73
Say 439.75

17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7641 Hubless centrifugally cast (spun) iron terminal guard (slotted
cowl) - 100 mm dia as per IS 15905 each 1.00 270.00 270.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 298.66
Add 1 % Water charges on "W" 2.99
TOTAL 301.65
Add GST on "X" (multiplying factor 0.1405) 42.38
TOTAL 344.03
Add 15% CPOH on "Y" 51.60
TOTAL 395.64
Add Cess @ 1% on "Z" 3.96
Cost of each 399.59
Say 399.60

17.56.2 75 mm
17.56.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1639 Slotted cowl (terminal guard )75 mm dia each 1.00 215.00 215.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 237.87
Add 1 % Water charges on "W" 2.38
TOTAL 240.25
Add GST on "X" (multiplying factor 0.1405) 33.76
TOTAL 274.01
Add 15% CPOH on "Y" 41.10
TOTAL 315.11
Add Cess @ 1% on "Z" 3.15
Cost of each 318.26
Say 318.25

17.56.2.2 Sand cast iron S&S as per IS - 3989


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 1.00 210.00 210.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 232.87
Add 1 % Water charges on "W" 2.33
TOTAL 235.20
Add GST on "X" (multiplying factor 0.1405) 33.05
TOTAL 268.25
Add 15% CPOH on "Y" 40.24
TOTAL 308.49
Add Cess @ 1% on "Z" 3.08
Cost of each 311.57
Say 311.55
17.57 Providing and fixing collar :
17.57.1 100 mm
17.57.1.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1686 S.C.I. collar 100 mm dia each 1.00 270.00 270.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 298.66
Add 1 % Water charges on "W" 2.99
TOTAL 301.65
Add GST on "X" (multiplying factor 0.1405) 42.38
TOTAL 344.03
Add 15% CPOH on "Y" 51.60
TOTAL 395.64
Add Cess @ 1% on "Z" 3.96
Cost of each 399.59
Say 399.60

17.57.1.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3738 S.C.I. S&S, collars 100 mm each 1.00 300.00 300.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 328.66
Add 1 % Water charges on "W" 3.29
TOTAL 331.95
Add GST on "X" (multiplying factor 0.1405) 46.64
TOTAL 378.59
Add 15% CPOH on "Y" 56.79
TOTAL 435.38
Add Cess @ 1% on "Z" 4.35
Cost of each 439.73
Say 439.75

17.57.2 75 mm
17.57.2.1 Sand cast iron S&S as per IS - 1729

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1685 S.C.I. collar 75 mm dia each 1.00 180.00 180.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 202.87
Add 1 % Water charges on "W" 2.03
TOTAL 204.90
Add GST on "X" (multiplying factor 0.1405) 28.79
TOTAL 233.69
Add 15% CPOH on "Y" 35.05
TOTAL 268.75
Add Cess @ 1% on "Z" 2.69
Cost of each 271.43
Say 271.45

17.57.2.2 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3739 S.C.I. S&S, collars 75 mm each 1.00 180.00 180.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 202.87
Add 1 % Water charges on "W" 2.03
TOTAL 204.90
Add GST on "X" (multiplying factor 0.1405) 28.79
TOTAL 233.69
Add 15% CPOH on "Y" 35.05
TOTAL 268.75
Add Cess @ 1% on "Z" 2.69
Cost of each 271.43
Say 271.45

17.57A
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 100 mm dia
17.57A.1
SS 304 grade coupling with EPDM rubber gasket
17.57A.1.1

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7644 SS 304 grade shielded coupling with EPDM rubber gasket for
100 mm dia Hubless centrifugally cast (spun) iron each 1.00 275.00 275.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 303.66
Add 1 % Water charges on "W" 3.04
TOTAL 306.70
Add GST on "X" (multiplying factor 0.1405) 43.09
TOTAL 349.79
Add 15% CPOH on "Y" 52.47
TOTAL 402.26
Add Cess @ 1% on "Z" 4.02
Cost of each 406.28
Say 406.30

17.57A.2 75 mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7645 SS 304 grade shielded coupling with EPDM rubber gasket for 75
mm dia Hubless centrifugally cast (spun) iron each 1.00 250.00 250.00
9977 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 272.87
Add 1 % Water charges on "W" 2.73
TOTAL 275.60
Add GST on "X" (multiplying factor 0.1405) 38.72
TOTAL 314.33
Add 15% CPOH on "Y" 47.15
TOTAL 361.47
Add Cess @ 1% on "Z" 3.61
Cost of each 365.09
Say 365.10
17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
17.58.1 100 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one joint
MATERIAL
1397 Pig lead kilogram 0.98 210.00 205.80
1881 Spun yarn kilogram 0.11 55.00 6.05
9999 Kerosene oil, fuel and other sundries L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 1.43 2.12 3.03
LABOUR
0116 Fitter (grade 1) day 0.06 784.00 47.04
0117 Assistant Fitter or 2nd class Fitter day 0.06 714.00 42.84
0114 Beldar day 0.12 645.00 77.40
TOTAL 410.82
Add 1 % Water charges on "W" 4.11
TOTAL 414.93
Add GST on "X" (multiplying factor 0.1405) 58.30
TOTAL 473.23
Add 15% CPOH on "Y" 70.98
TOTAL 544.21
Add Cess @ 1% on "Z" 5.44
Cost of each 549.66
Say 549.65
17.58.2 75 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one joint
MATERIAL
1397 Pig lead kilogram 0.88 210.00 184.80
1881 Spun yarn kilogram 0.09 55.00 4.95
9999 Kerosene oil, fuel and other sundries L.S. 10.79 2.12 22.87
9977 Carriage of materials L.S. 1.43 2.12 3.03
LABOUR
0116 Fitter (grade 1) day 0.05 784.00 39.20
0117 Assistant Fitter or 2nd class Fitter day 0.05 714.00 35.70
0114 Beldar day 0.09 645.00 58.05
TOTAL 348.61
Add 1 % Water charges on "W" 3.49
TOTAL 352.09
Add GST on "X" (multiplying factor 0.1405) 49.47
TOTAL 401.56
Add 15% CPOH on "Y" 60.23
TOTAL 461.80
Add Cess @ 1% on "Z" 4.62
Cost of each 466.41
Say 466.40

17.58.3 50 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one joint
MATERIAL
1397 Pig lead kilogram 0.77 210.00 161.70
1881 Spun yarn kilogram 0.06 55.00 3.30
9999 Kerosene oil, fuel and other sundries L.S. 6.76 2.12 14.33
9977 Carriage of materials L.S. 1.43 2.12 3.03
LABOUR
0116 Fitter (grade 1) day 0.04 784.00 31.36
0117 Assistant Fitter or 2nd class Fitter day 0.05 714.00 35.70
0114 Beldar day 0.05 645.00 32.25
TOTAL 281.67
Add 1 % Water charges on "W" 2.82
TOTAL 284.49
Add GST on "X" (multiplying factor 0.1405) 39.97
TOTAL 324.46
Add 15% CPOH on "Y" 48.67
TOTAL 373.13
Add Cess @ 1% on "Z" 3.73
Cost of each 376.86
Say 376.85
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
17.59.1 100 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe
each 1.00 67.50 67.50
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 96.16
Add 1 % Water charges on "W" 0.96
TOTAL 97.12
Add GST on "X" (multiplying factor 0.1405) 13.65
TOTAL 110.77
Add 15% CPOH on "Y" 16.62
TOTAL 127.39
Add Cess @ 1% on "Z" 1.27
Cost of each 128.66
Say 128.65
17.59.2 75 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1335 Clamps and M.S. stays including bolts and nuts for 75 mm pipe
each 1.00 37.00 37.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87
TOTAL 59.87
Add 1 % Water charges on "W" 0.60
TOTAL 60.47
Add GST on "X" (multiplying factor 0.1405) 8.50
TOTAL 68.97
Add 15% CPOH on "Y" 10.35
TOTAL 79.32
Add Cess @ 1% on "Z" 0.79
Cost of each 80.11
Say 80.10

17.59.3 50 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1334 Clamps and M.S. stays including bolts and nuts for 50 mm pipe
each 1.00 35.00 35.00
9988 Carriage of materials and fixing charges L.S. 9.49 2.12 20.12
TOTAL 55.12
Add 1 % Water charges on "W" 0.55
TOTAL 55.67
Add GST on "X" (multiplying factor 0.1405) 7.82
TOTAL 63.49
Add 15% CPOH on "Y" 9.52
TOTAL 73.02
Add Cess @ 1% on "Z" 0.73
Cost of each 73.75
Say 73.75
17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cos
cutting and making good the walls and floors :
17.60.1 100 mm inlet and 100 mm outlet
17.60.1.1 Sand cast iron S&S as per IS: 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm
outlet each 1.00 450.00 450.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1198.95
Add 1 % Water charges on "W" 11.99
TOTAL 1210.94
Add GST on "X" (multiplying factor 0.1405) 170.14
TOTAL 1381.08
Add 15% CPOH on "Y" 207.16
TOTAL 1588.24
Add Cess @ 1% on "Z" 15.88
Cost of each 1604.12
Say 1604.10
17.60.1.2 Sand Cast Iron S&S as per IS: 1729
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 1.00 300.00 300.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1048.95
Add 1 % Water charges on "W" 10.49
TOTAL 1059.44
Add GST on "X" (multiplying factor 0.1405) 148.85
TOTAL 1208.29
Add 15% CPOH on "Y" 181.24
TOTAL 1389.53
Add Cess @ 1% on "Z" 13.90
Cost of each 1403.43
Say 1403.45

17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and
100 mm outlet as per IS 15905 each 1.00 540.00 540.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 568.66
Add 1 % Water charges on "W" 5.69
TOTAL 574.35
Add GST on "X" (multiplying factor 0.1405) 80.70
TOTAL 655.05
Add 15% CPOH on "Y" 98.26
TOTAL 753.30
Add Cess @ 1% on "Z" 7.53
Cost of each 760.83
Say 760.85

17.60.2 100 mm inlet and 75 mm outlet


17.60.2.1 Sand cast iron S&S as per IS - 3989

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm
outlet each 1.00 500.00 500.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 1248.95
Add 1 % Water charges on "W" 12.49
TOTAL 1261.44
Add GST on "X" (multiplying factor 0.1405) 177.23
TOTAL 1438.67
Add 15% CPOH on "Y" 215.80
TOTAL 1654.47
Add Cess @ 1% on "Z" 16.54
Cost of each 1671.02
Say 1671.00
17.60.2.2 Sand Cast Iron S&S as per IS- 1729
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet each 1.00 220.00 220.00
9999 Cement, sand and grit etc. L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0123 Mason (brick layer) 1st class day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
TOTAL 968.95
Add 1 % Water charges on "W" 9.69
TOTAL 978.64
Add GST on "X" (multiplying factor 0.1405) 137.50
TOTAL 1116.14
Add 15% CPOH on "Y" 167.42
TOTAL 1283.56
Add Cess @ 1% on "Z" 12.84
Cost of each 1296.39
Say 1296.40

17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one no.
MATERIAL
7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and
75 mm outlet as per IS 15905 each 1.00 385.00 385.00
9977 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 413.66
Add 1 % Water charges on "W" 4.14
TOTAL 417.80
Add GST on "X" (multiplying factor 0.1405) 58.70
TOTAL 476.50
Add 15% CPOH on "Y" 71.47
TOTAL 547.97
Add Cess @ 1% on "Z" 5.48
Cost of each 553.45
Say 553.45
17.61 Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the sa
with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in
cement mortar 1:4 (1 cement : 4 coarse sand) :
17.61.1 100 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre
MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded
stone aggregate )
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.022 8843.45 194.56
9999 Plastering in cement mortar 1:4 L.S. 10.40 2.12 22.05
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0123 Mason (brick layer) 1st class day 0.14 784.00 109.76
0114 Beldar day 0.27 645.00 174.15
TOTAL 509.33
Add 1 % Water charges on "W-A" 3.15
TOTAL 512.48
Add GST on "X-A" (multiplying factor 0.1405) 44.67
TOTAL 557.15
Add 15% CPOH on "Y-A" 54.39
TOTAL 611.54
Add Cess @ 1% on "Z-A" 4.17
Cost of one metre 615.71
Say 615.70
17.61.2 75 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one metre
MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded
stone aggregate )
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.015 8843.45 132.65
9999 Plastering in cement mortar 1:4 L.S. 7.80 2.12 16.54
9977 Carriage of materials L.S. 3.51 2.12 7.44
LABOUR
0123 Mason (brick layer) 1st class day 0.10 784.00 78.40
0114 Beldar day 0.20 645.00 129.00
TOTAL 364.03
Add 1 % Water charges on "W-A" 2.31
TOTAL 366.34
Add GST on "X-A" (multiplying factor 0.1405) 32.83
TOTAL 399.18
Add 15% CPOH on "Y-A" 39.98
TOTAL 439.15
Add Cess @ 1% on "Z-A" 3.07
Cost of one metre 442.22
Say 442.20

17.61.3 50 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre
MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded
stone aggregate )
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.008 8843.45 70.75
9999 Plastering in cement mortar 1:4 L.S. 5.20 2.12 11.02
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0123 Mason (brick layer) 1st class day 0.07 784.00 54.88
0114 Beldar day 0.14 645.00 90.3
TOTAL 232.74
Add 1 % Water charges on "W-A" 1.62
TOTAL 234.36
Add GST on "X-A" (multiplying factor 0.1405) 22.99
TOTAL 257.35
Add 15% CPOH on "Y-A" 27.99
TOTAL 285.34
Add Cess @ 1% on "Z-A" 2.15
Cost of one metre 287.48
Say 287.50
17.62 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (o
approved quality ) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one cistern with fittings
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.23 100.00 23.00
4202 Red oxide Zinc chromate primer litre 0.20 120.00 24.00
0834 Synthetic enamel paint in all shades except black or chocolate
shade litre 0.40 165.00 66.00
9977 Carriage of materials L.S. 1.43 2.12 3.03
9999 Sundries L.S. 6.76 2.12 14.33
LABOUR
0131 Painter day 0.25 714.00 178.50
0114 Beldar day 0.50 645.00 322.50
TOTAL 631.36
Add 1 % Water charges on "W" 6.31
TOTAL 637.68
Add GST on "X" (multiplying factor 0.1405) 89.59
TOTAL 727.27
Add 15% CPOH on "Y" 109.09
TOTAL 836.36
Add Cess @ 1% on "Z" 8.36
Cost of each 844.72
Say 844.70
17.63 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the
outside surface of the cistern, flush pipe, other fittings, etc. complete, including polishing of wooden seat and lid and cleaning of W.C. pan with acid
wherever necessary.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one cistern with fittings
MATERIAL
0828 Anticorrosive bituminous paint (black) litre 0.23 100.00 23.00
0834 Synthetic enamel paint in all shades except black or chocolate
shade litre 0.20 165.00 33.00
9999 Polishing of wooden seat and cleaning of W.C. pan with acid L.S. 20.67 2.12 43.82
9988 Sundries and carriage of materials L.S. 7.15 2.12 15.16
LABOUR
0131 Painter day 0.20 714.00 142.80
0114 Beldar day 0.25 645.00 161.25
TOTAL 419.03
Add 1 % Water charges on "W" 4.19
TOTAL 423.22
Add GST on "X" (multiplying factor 0.1405) 59.46
TOTAL 482.68
Add 15% CPOH on "Y" 72.40
TOTAL 555.08
Add Cess @ 1% on "Z" 5.55
Cost of each 560.63
Say 560.65
17.64 Repainting C.I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside surface of cistern, flush p
other fittings etc. complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one cistern with fittings
MATERIAL
0834 Synthetic enamel paint in all shades except black or chocolate
shade litre 0.20 165.00 33.00
9988 Sundries and carriage of materials L.S. 3.64 2.12 7.72
LABOUR
0131 Painter day 0.09 714.00 64.26
0114 Beldar day 0.12 645.00 77.40
TOTAL 182.38
Add 1 % Water charges on "W" 1.82
TOTAL 184.20
Add GST on "X" (multiplying factor 0.1405) 25.88
TOTAL 210.08
Add 15% CPOH on "Y" 31.51
TOTAL 241.59
Add Cess @ 1% on "Z" 2.42
Cost of each 244.01
Say 244.00
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any
colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
17.65.1 100 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres MATERIAL
Perimeter = 3.14x110 mm =345.71 Area 10x0.3457 = 3.46 sqm Priming
coat
Rate as per item no 13.50.3 of SH : Finishing

13.50.3 sqm 3.46 55.50 192.03

13.61.1 Painting two coats with paint of any colour such as chocolatem grey or sqm L.S. 3.46 131.45 454.82
9999 buff etc. 17.16 2.12 36.38
Rate as per item no 13.61.1 of SH : Finishing Add for delay 683.23
TOTAL 0.36
Add 1 % Water charges on "W-A" TOTAL 683.59
Add GST on "X" (multiplying factor 0.1405) TOTAL 5.16
Add 15% CPOH on "Y-A" TOTAL 688.75
Add Cess @ 1% on "Z-A" Cost of 10 metres 6.29
Cost of 1 metre 695.04
Say 0.48
695.52
69.55
69.55
17.65.2 75 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


13.50.3 Details of cost for 10 metres MATERIAL sqm 2.60 55.50 144.30
13.61.1 Perimeter = 3.14x82 mm =257.71 sqm L.S. 2.60 131.45 341.77
9999 Area 10x0.2577 =2.577 sqm say 2.60 sq. m for outer surface 15.21 2.12 32.25
Priming coat 518.32
Rate as per item no 13.50.3 of SH : Finishing 0.32
Painting two coats with paint of any colour such as choclate grey or buff 518.64
etc. 4.58
Rate as per item no 13.61.1 of SH : Finishing Add for delay 523.21
TOTAL 5.57
Add 1 % Water charges on "W-A" TOTAL 528.78
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 0.43
Add 15% CPOH on "Y-A" TOTAL 529.21
Add Cess @ 1% on "Z-A" Cost of 10 metres 52.92
Cost of 1 metre 52.90
Say

17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint
any colour such as chocolate, grey or buff etc :

17.66.1 100 mm diameter pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
13.99.1 Details of cost for 10 metres sqm L.S. 3.46 86.55 299.46
9999 Painting one coat with paint of any colour such as chocolate,grey or buff 12.22 2.12 25.91
etc. 325.37
(Rate as per item no 13.99.1 of S.H. Finishing) Add for delay 0.26
TOTAL 325.63
Add 1 % Water charges on "W-A" TOTAL 3.68
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 329.30
Add 15% CPOH on "Y-A" TOTAL 4.48
Add Cess @ 1% on "Z-A" Cost of 10 metres 333.78
Cost of 1 metre 0.34
Say 334.12
33.41
33.40

17.66.2 75 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


13.99.1 Details of cost for 10 metres sqm L.S. 2.577 86.55 223.04
9999 Painting one coat with paint of any colour such as chocolate,grey or buff 9.49 2.12 20.12
etc. 243.16
(Rate as per item no 13.99.1 of S.H. Finishing) Add for delay 0.20
TOTAL 243.36
Add 1 % Water charges on "W-A" TOTAL 2.85
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 246.21
Add 15% CPOH on "Y-A" TOTAL 3.48
Add Cess @ 1% on "Z-A" Cost of 10 metres 249.69
Cost of 1 metre 0.27
Say 249.96
25.00
25.00

17.67 Repainting bath tub of size 1700x730x430 mm with enamel paint.

Code Description Unit Quantity Rate Rs. Amount Rs.


0833 Details of cost for one tub MATERIAL litre L.S. 0.90 175.00 157.50
9999 Synthetic enamel paint in black or chocolate shade Sundries day day 6.76 2.12 14.33
0131 LABOUR 0.25 714.00 178.50
0115 Painter Coolie TOTAL 0.25 645.00 161.25
Add 1 % Water charges on "W" TOTAL 511.58
Add GST on "X" (multiplying factor 0.1405) TOTAL 5.12
Add 15% CPOH on "Y" TOTAL 516.70
Add Cess @ 1% on "Z" Cost of each 72.60
Say 589.29
88.39
677.69
6.78
684.46
684.45

17.68 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W
pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20
over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings an
brackets, cutting and making good the walls and floors wherever required:
17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush

Code Description Unit Quantity Rate Rs. Amount Rs.


1875 Details of cost for one no. MATERIAL each 1.00 410.00 410.00
1965 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each each L.S. 1.00 2500.00 2500.00
7006 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for each L.S. 1.00 1200.00 1200.00
9999 use as sequatting pan or European type water closet as per L.S. 276.25 2.12 585.65
1350 manufacturer's specifications L.S. 1.00 30.00 30.00
9999 Vitreous china 10 litres low level cistern with fittings L.S. 59.15 2.12 125.40
9999 20 mm G.I.over flow pipe and specials for over flow pipe Mosquito proof day day day 71.76 2.12 152.13
9999 coupling of approved design 118.43 2.12 251.07
9977 Plugs, screws etc. 118.43 2.12 251.07
0116 Red lead, white lead and gaskin etc. Cement,sand and grit 1.00 784.00 784.00
0123 Carriage of materials LABOUR 1.00 784.00 784.00
0114 Fitter (grade 1) 1.00 645.00 645.00
Mason (brick layer) 1st class Beldar 7718.32
TOTAL 77.18
Add 1 % Water charges on "W" TOTAL 7795.51
Add GST on "X" (multiplying factor 0.1405) TOTAL 1095.27
Add 15% CPOH on "Y" TOTAL 8890.77
Add Cess @ 1% on "Z" Cost of each 1333.62
Say 10224.39
102.24
10326.63
10326.65

17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7491 Details of cost for one no. MATERIAL each L.S. 1.00 34.00 34.00
9988 PTMT Waste Coupling 31/32MM Carriage of materials and fixing charges 20.28 2.12 42.99
TOTAL 76.99
Add 1 % Water charges on "W" TOTAL 0.77
Add GST on "X" (multiplying factor 0.1405) TOTAL 77.76
Add 15% CPOH on "Y" TOTAL 10.93
Add Cess @ 1% on "Z" Cost of each 88.69
Say 13.30
101.99
1.02
103.01
103.00

17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7492 Details of cost for one no. MATERIAL each L.S. 1.00 39.00 39.00
9988 PTMT Waste Coupling 38/40MM Carriage of materials and fixing charges 20.28 2.12 42.99
TOTAL 81.99
Add 1 % Water charges on "W" TOTAL 0.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 82.81
Add 15% CPOH on "Y" TOTAL 11.64
Add Cess @ 1% on "Z" Cost of each 94.45
Say 14.17
108.62
1.09
109.70
109.70

17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling
mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7493 Details of cost for one no. MATERIAL each L.S. 1.00 200.00 200.00
9988 PTMT Bottle Trap 31/32MM 20.28 2.12 42.99
Carriage of materials and fixing charges TOTAL 242.99
Add 1 % Water charges on "W" TOTAL 2.43
Add GST on "X" (multiplying factor 0.1405) TOTAL 245.42
Add 15% CPOH on "Y" TOTAL 34.48
Add Cess @ 1% on "Z" Cost of each 279.91
Say 41.99
321.89
3.22
325.11
325.10

17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling
mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7494 Details of cost for one no. MATERIAL each L.S. 1.00 200.00 200.00
9988 PTMT Bottle Trap 38/40MM 20.28 2.12 42.99
Carriage of materials and fixing charges TOTAL 242.99
Add 1 % Water charges on "W" TOTAL 2.43
Add GST on "X" (multiplying factor 0.1405) TOTAL 245.42
Add 15% CPOH on "Y" TOTAL 34.48
Add Cess @ 1% on "Z" Cost of each 279.91
Say 41.99
321.89
3.22
325.11
325.10
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brac
of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Code Description Unit Quantity Rate Rs. Amount Rs.


7503 Details of cost for one no. MATERIAL each L.S. 1.00 95.00 95.00
9988 PTMT Liquid Soap Container of 400ml capacity Carriage of materials and 6.76 2.12 14.33
fixing charges TOTAL 109.33
Add 1 % Water charges on "W" TOTAL 1.09
Add GST on "X" (multiplying factor 0.1405) TOTAL 110.42
Add 15% CPOH on "Y" TOTAL 15.51
Add Cess @ 1% on "Z" Cost of each 125.94
Say 18.89
144.83
1.45
146.28
146.30

17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face wit
concealed fittings arrangement of approved quality and colour,
weighing not less than 88 gms.
Code Description Unit Quantity Rate Rs. Amount Rs.
7504 MATERIAL each L.S. 1.00 110.00 110.00
9988 PTMT - Towel Ring 215x200x37mm Carriage of materials and fixing 20.28 2.12 42.99
charges TOTAL 152.99
Add 1 % Water charges on "W" TOTAL 1.53
Add GST on "X" (multiplying factor 0.1405) TOTAL 154.52
Add 15% CPOH on "Y" TOTAL 21.71
Add Cess @ 1% on "Z" Cost of each 176.23
Say 26.44
202.67
2.03
204.70

204.70
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7505 Details of cost for one no. MATERIAL each 1.00 125.00 125.00
8.23 PTMT Towel Rail (450mm) Wooden cleates each 100 Nos 2.00 35.50 71.00
0588 Rate as per item no 8.23 of SH : Cladding work Chromium plated Brass L.S. 0.06 180.00 10.80
9977 screws 25 mm Carriage of materials day day 4.16 2.12 8.82
0112 LABOUR 0.17 714.00 121.38
0114 Carpenter 2nd class Beldar 0.17 645.00 109.65
TOTAL 446.65
Add 1 % Water charges on "W-A" TOTAL 3.76
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 450.41
Add 15% CPOH on "Y-A" TOTAL 53.31
Add Cess @ 1% on "Z-A" Cost of each 503.71
Say 64.91
568.62
4.98
573.60
573.60

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Code Description Unit Quantity Rate Rs. Amount Rs.


7506 Details of cost for one no. MATERIAL each 1.00 145.00 145.00
8.23 PTMT Towel Rail (600mm) Wooden cleates each 100 Nos 2.00 35.50 71.00
0588 Rate as per item no 8.23 of SH : Cladding work Chromium plated Brass L.S. 0.06 180.00 10.80
9977 screws 25 mm Carriage of materials day day 4.16 2.12 8.82
0112 LABOUR 0.17 714.00 121.38
0114 Carpenter 2nd class Beldar 0.17 645.00 109.65
TOTAL 466.65
Add 1 % Water charges on "W-A" TOTAL 3.96
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 470.61
Add 15% CPOH on "Y-A" TOTAL 56.14
Add Cess @ 1% on "Z-A" Cost of each 526.75
Say 68.36
595.11
5.24
600.35
600.35

17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and
colour, weighing not less than 300 gms.

Code Description Unit Quantity Rate Rs. Amount Rs.


7507 Details of cost for one no. MATERIAL each 1.00 150.00 150.00
8.23 PTMT Shelf 450x124x36mm Wooden cleates each 100 Nos 2.00 35.50 71.00
0588 Rate as per item no 8.23 of SH : Cladding work Chromium plated Brass L.S. 0.06 180.00 10.80
9977 screws 25 mm Carriage of materials day day 4.16 2.12 8.82
0112 LABOUR 0.17 714.00 121.38
0114 Carpenter 2nd class Beldar 0.17 645.00 109.65
TOTAL 471.65
Add 1 % Water charges on "W-A" TOTAL 4.01
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 475.66
Add 15% CPOH on "Y-A" TOTAL 56.85
Add Cess @ 1% on "Z-A" Cost of each 532.51
Say 69.23
601.74
5.31
607.04
607.05

17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

Code Description Unit Quantity Rate Rs. Amount Rs.


7508 Details of cost for one no. MATERIAL each L.S. 1.00 55.00 55.00
9988 PTMT Urinal Spreader 15mm 6.76 2.12 14.33
Carriage of materials and fixing charges TOTAL 69.33
Add 1 % Water charges on "W" TOTAL 0.69
Add GST on "X" (multiplying factor 0.1405) TOTAL 70.02
Add 15% CPOH on "Y" TOTAL 9.84
Add Cess @ 1% on "Z" Cost of each 79.86
Say 11.98
91.84
0.92
92.76
92.75

17.76 Providing and fixing PTMT urinal cock of approved quality and colour.
17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


7858 Details of cost for 1 no. MATERIAL each L.S. 1.00 95.00 95.00
9988 P.T.M.T. Urinal cock 15mm dia Carriage of materials and fixing charges 8.06 2.12 17.09
TOTAL 112.09
Add 1 % Water charges on "W" TOTAL 1.12
Add GST on "X" (multiplying factor 0.1405) TOTAL 113.21
Add 15% CPOH on "Y" TOTAL 15.91
Add Cess @ 1% on "Z" Cost of each 129.11
Say 19.37
148.48
1.48
149.97
149.95

17.77 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes
comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm
expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the
already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S
nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
17.77.1 Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)

Code Description Unit Quantity Rate Rs. Amount Rs.


1007 Details of cost for 5 nos. MATERIAL quintal tonne 0.0686 4950.00 339.57
2205 M.S. flats 50x5mm 5 x 0.58 = 2.90m @ 1.97 kg/ metre = 5.71 kg. day day day 0.0068 145.72 0.99
0116 M.S. flats 30x1.6mm 5x0.42 = 2.10m. 0.38kg/metre = 0.80kg. sqm L.S. 0.033 784.00 25.87
0103 Total = 6.51kg. each 0.049 714.00 34.99
0114 Add wastage 5% = 0.33kg. Total = 6.86 kg.= 0.0686 quintal 0.065 645.00 41.93
13.50.1 Structurals such as tees,angles channels and R.S. joists Carriage of Steel 0.45 61.45 27.65
9999 LABOUR 1.35 2.12 2.86
8.8.1.1 Fitter (grade 1) Blacksmith 2nd class Beldar 20.00 30.75 615.00
priming coat 5x0.58x0.11 = 0.32 1088.86
5x0.42x0.063 = 0.13 4.46
Total=0.45sqm 1093.32
Rate as per item no 13.50.1 of SH : Finishing Sundries 63.32
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 1156.64
Rate asper item no. 8.8.1.1 of SH :- Marble work TOTAL 77.10
Add 1 % Water charges on "W-A" TOTAL 1233.74
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 5.91
Add 15% CPOH on "Y-A" TOTAL 1239.65
Add Cess @ 1% on "Z-A" Cost of 5 Nos. 247.93
Cost of each 247.95
Say

17.77.2 Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 nos. MATERIAL
M.S. flats 50x5mm 5 x 0.81 = 4.05m @ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m. 0.38kg/metre = 1.60kg.
Total = 9.58kg.
Add wastage 5% = 0.48kg. Total = 10.06 kg.
M.S.flats 10.06kg. = 0.1006 quintal
Structurals such as tees,angles channels and R.S. joists Carriage of Steel
LABOUR
Fitter (grade 1) Blacksmith 2nd class Beldar
priming coat 5x0.81x0.11 = 0.45
5x2x0.42x0.063 = 0.26
Total =0.71sqm
1007 Rate as per item no 13.50.1 of SH : Finishing Sundries 0.1006 4950.00 497.97
2205 P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 0.01006 145.72 1.47
0116 Rate asper item no. 8.8.1.1 of SH :- Marble work quintal tonne 0.048 784.00 37.63
0103 day day day 0.072 714.00 51.41
0114 sqm L.S. 0.096 645.00 61.92
13.50.1 each 0.71 61.45 43.63
9999 1.98 2.12 4.20
8.8.1.1 20.00 30.75 615.00

TOTAL 1313.22
Add 1 % Water charges on "W-A" TOTAL 6.55
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1319.77
Add 15% CPOH on "Y-A" TOTAL 92.89
Add Cess @ 1% on "Z-A" Cost of 5 Nos. 1412.66
Cost of each 113.10
Say 1525.76
8.67
1534.43
306.89
306.90

17.77.3 Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)

Code Description Unit Quantity Rate Rs. Amount Rs.


1007 Details of cost for 5 nos. MATERIAL quintal tonne 0.1326 4950.00 656.37
2205 M.S. flats 50x5mm 5 x 1.04= 5.20m @ 1.97 kg/ metre = 10.24 kg. day day day 0.01326 145.72 1.93
0116 M.S. flats 30x1.6mm 5x3x0.42 = 6.30m. 0.38kg/metre = 2.39kg. sqm L.S. 0.063 784.00 49.39
0103 Total = 12.63kg. each 0.095 714.00 67.83
0114 Add wastage 5% = 0.63kg. Total = 13.26 kg. 0.126 645.00 81.27
13.50.1 M.S.flats 13.26kg. = 0.1326 quintal 0.97 61.45 59.61
9999 Structurals such as tees,angles channels and R.S. joists Carriage of Steel 2.60 2.12 5.51
8.8.1.1 LABOUR 20.00 30.75 615.00
Fitter (grade 1) Blacksmith 2nd class Beldar 1536.91
priming coat 5x1.04x0.11 = 0.57 8.62
5x3x0.42x0.063 = 0.40 1545.54
Total=0.97sqm 122.37
Rate as per item no 13.50.1 of SH : Finishing Sundries 1667.90
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 148.99
Rate asper item no. 8.8.1.1 of SH :- Marble work TOTAL 1816.90
Add 1 % Water charges on "W-A" TOTAL 11.42
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1828.32
Add 15% CPOH on "Y-A" TOTAL 365.66
Add Cess @ 1% on "Z-A" Cost of 5 Nos. 365.65
Cost of each
Say

17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat co
and cistern fittings, nuts, bolts and gasket etc complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


7072 Details of cost for one pan MATERIAL each each 1.00 5500.00 5500.00
7073 Wall mounted water closet each L.S. 1.00 1600.00 1600.00
1875 Adjustable Vetrious China Cistern with fittings day day day 1.00 410.00 410.00
9977 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers 9.79 2.12 20.75
0116 Carriage of materials LABOUR 1.00 784.00 784.00
0123 Fitter (grade 1) 1.00 784.00 784.00
0114 Mason (brick layer) 1st class Beldar 1.00 645.00 645.00
TOTAL 9743.75
Add 1 % Water charges on "W" TOTAL 97.44
Add GST on "X" (multiplying factor 0.1405) TOTAL 9841.19
Add 15% CPOH on "Y" TOTAL 1382.69
Add Cess @ 1% on "Z" Cost of each 11223.88
Say 1683.58
12907.46
129.07
13036.54
13036.55

17.79 Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial
/germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.
Code Description Unit Quantity Rate Rs. Amount Rs.
7074 Details of cost for one pan MATERIAL each each L.S. 1.00 9000.00 9000.00
7075 White Vetrious China Waterless Urinal Cistern with fittings for Waterless day day 1.00 2200.00 2200.00
9977 Urinal Carriage of materials 9.79 2.12 20.75
0116 LABOUR 0.50 784.00 392.00
0114 Fitter (grade 1) Beldar 0.50 645.00 322.50
TOTAL 11935.25
Add 1 % Water charges on "W" TOTAL 119.35
Add GST on "X" (multiplying factor 0.1405) TOTAL 12054.61
Add 15% CPOH on "Y" TOTAL 1693.67
Add Cess @ 1% on "Z" Cost of each 13748.28
Say 2062.24
15810.52
158.11
15968.63
15968.65

17.80 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &
flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per
manufacturers specification and direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7076 Details of cost for one pan MATERIAL each L.S. 1.00 4500.00 4500.00
9977 White Vetrious Urinal Carriage of materials LABOUR day day 9.79 2.12 20.75
0116 Fitter (grade 1) Beldar 0.50 784.00 392.00
0114 TOTAL 0.50 645.00 322.50
Add 1 % Water charges on "W" TOTAL 5235.25
Add GST on "X" (multiplying factor 0.1405) TOTAL 52.35
Add 15% CPOH on "Y" TOTAL 5287.61
Add Cess @ 1% on "Z" Cost of each 742.91
Say 6030.52
904.58
6935.09
69.35
7004.44
7004.45

17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet
of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,
including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap,
complete in all respect as per directions of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


1966 Details of cost for 1 no. MATERIAL
9977 Floor mounted, white vitreous china single piece, double traps syphonic
0116 water closet of approved brand/make, shape, size and pattern including
0114 integrated white vitreous china cistern of capacity 10 litres with dual
0123 flushing system including all fittings and fixtures with seat cover, cistern
fittings, nuts, bolts and gasket etc.
Carriage of material LABOUR 9800.00
Fitter (grade 1) Beldar 20.75
Mason (brick layer) 1st class TOTAL 784.00
Add 1 % Water charges on "W" TOTAL 645.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 784.00
Add 15% CPOH on "Y" TOTAL 1.00 9800.00 12033.75
Add Cess @ 1% on "Z" Cost of each 9.79 2.12 120.34
each L.S.
Say 1.00 784.00 12154.09
day day day
1.00 645.00 1707.65
1.00 784.00 13861.74
2079.26
15941.00
159.41
16100.41
16100.40
SUB HEAD : 18.0
WATER SUPPLY
1091
SUB HEAD : 18.0
WATER SUPPLY
1091

18.1 Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with ca
black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. T
includes testing of joints complete as per direction of the Engineer-in-charge.
INTERNAL WORK - EXPOSED ON WALL
18.1.1 1216 (16 mm OD) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8300 1216 mm PE-AL-PE Composit pressure pipe metre 10.00 80.00 800.00
Add 30% for fittings and wastage etc. on (P) 240.00
30 x P / 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 2201.45
Add 1 % Water charges on "W" 22.01
TOTAL 2223.46
Add GST on "X" (multiplying factor 0.1405) 312.40
TOTAL 2535.86
Add 15% CPOH on "Y" 380.38
TOTAL 2916.24
Add Cess @ 1% on "Z" 29.16
Cost of 10 metre 2945.40
Cost of 1 metre 294.54
Say 294.55

18.1.2 1620 (20 mm OD) pipe


P
WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
P
WXYZ
Details of cost for 10 metre
MATERIAL
8301 1620 mm PE-AL-PE Composit pressure pipe metre 10.00 90.00 900.00
Add 30% for fittings and wastage etc. on (P) 270.00
30 x P / 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.82 714.00 585.48
0114 Beldar day 0.66 645.00 425.70
TOTAL 2445.69
Add 1 % Water charges on "W" 24.46
TOTAL 2470.14
Add GST on "X" (multiplying factor 0.1405) 347.06
TOTAL 2817.20
Add 15% CPOH on "Y" 422.58
TOTAL 3239.78
Add Cess @ 1% on "Z" 32.40
Cost of 10 metre 3272.18
Cost of 1 metre 327.22
Say 327.20
18.1.3 2025 (25 mm OD) pipe
Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXY
MATERIAL Z
8302 2025 mm PE-AL-PE Composit pressure pipe metre 10.00 140.00 1400.00
Add 30% for fittings and wastage etc. on (P) 420.00
30 x P / 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 3209.93
Add 1 % Water charges on "W" 32.10
TOTAL 3242.03
Add GST on "X" (multiplying factor 0.1405) 455.50
TOTAL 3697.53
Add 15% CPOH on "Y" 554.63
TOTAL 4252.16
Add Cess @ 1% on "Z" 42.52
Cost of 10 metre 4294.68
Cost of 1 metre 429.47
Say 429.45

18.1.4 2532 (32 mm OD) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8303 2532 mm PE-AL-PE Composit pressure pipe metre 10.00 180.00 1800.00
Add 30% for fittings and wastage etc. on (P) 540.00
30 x P / 100
9999 Cement, sand and grit L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.98 645.00 632.10
TOTAL 3939.36
Add 1 % Water charges on "W" 39.39
TOTAL 3978.75
Add GST on "X" (multiplying factor 0.1405) 559.01
TOTAL 4537.77
Add 15% CPOH on "Y" 680.67
TOTAL 5218.43
Add Cess @ 1% on "Z" 52.18
Cost of 10 metre 5270.62
Cost of 1 metre 527.06
Say 527.05

18.1.5 3240 (40 mm OD) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
P
WXYZ

8304 3240 mm PE-AL-PE Composit pressure pipe metre 10.00 280.00 2800.00
Add 30% for fittings and wastage etc. on (P) 840.00
30 x P / 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 5690.31
Add 1 % Water charges on "W" 56.90
TOTAL 5747.21
Add GST on "X" (multiplying factor 0.1405) 807.48
TOTAL 6554.70
Add 15% CPOH on "Y" 983.20
TOTAL 7537.90
Add Cess @ 1% on "Z" 75.38
Cost of 10 metre 7613.28
Cost of 1 metre 761.33
Say 761.35
18.1.6 4050 (50 mm OD) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8305 4050 mm PE-AL-PE Composit pressure pipe metre 10.00 360.00 3600.00
Add 30% for fittings and wastage etc. on (P) 1080.00
30 x P / 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 6730.31
Add 1 % Water charges on "W" 67.30
TOTAL 6797.61
Add GST on "X" (multiplying factor 0.1405) 955.06
TOTAL 7752.68
Add 15% CPOH on "Y" 1162.90
TOTAL 8915.58
Add Cess @ 1% on "Z" 89.16
Cost of 10 metre 9004.73
Cost of 1 metre 900.47
Say 900.45
18.2 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with c
black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. T
includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall etc.
18.2.1 1216 (16 mm OD) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8300 1216 mm PE-AL-PE Composit pressure pipe metre 10.00 80.00 800.00
Add 75% for fittings, clamps and wastage etc. on (P) 600.00
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.7
TOTAL 4273.66
Add 1 % Water charges on "W-A" 25.56
TOTAL 4299.22
Add GST on "X-A" (multiplying factor 0.1405) 362.66
TOTAL 4661.88
Add 15% CPOH on "Y-A" 441.58
TOTAL 5103.46
Add Cess @ 1% on "Z-A" 33.85
Cost of 10 metre 5137.31
Cost of 1 metre 513.73
Say 513.75
18.2.2 1620 (20 mm OD) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8301 1620 mm PE-AL-PE Composit pressure pipe metre 10.00 90.00 900.00
Add 75% for fittings, clamps and wastage etc. on (P) 675.00
75 * P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 of SH: water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4448.66
Add 1 % Water charges on "W-A" 27.31
TOTAL 4475.97
Add GST on "X-A" (multiplying factor 0.1405) 387.49
TOTAL 4863.46
Add 15% CPOH on "Y-A" 471.82
TOTAL 5335.28
Add Cess @ 1% on "Z-A" 36.17
Cost of 10 metre 5371.45
Cost of 1 metre 537.15
Say 537.15
18.2.3 2025 (25 mm OD) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXY
MATERIAL Z
8302 2025 mm PE-AL-PE Composit pressure pipe metre 10.00 140.00 1400.00
Add 75% for fittings, clamps and wastage etc. on (P) 1050.00
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 5323.66
Add 1 % Water charges on "W-A" 36.06
TOTAL 5359.72
Add GST on "X-A" (multiplying factor 0.1405) 511.66
TOTAL 5871.38
Add 15% CPOH on "Y-A" 623.01
TOTAL 6494.38
Add Cess @ 1% on "Z-A" 47.76
Cost of 10 metre 6542.15
Cost of 1 metre 654.21
Say 654.20
18.2.4 2532 (32 mm OD) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8303 2532 mm PE-AL-PE Composit pressure pipe metre 10.00 180.00 1800.00
Add 75% for fittings, clamps and wastage etc. on (P) 1350.00
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 6023.66
Add 1 % Water charges on "W-A" 43.06
TOTAL 6066.72
Add GST on "X-A" (multiplying factor 0.1405) 610.99
TOTAL 6677.71
Add 15% CPOH on "Y-A" 743.96
TOTAL 7421.67
Add Cess @ 1% on "Z-A" 57.04
Cost of 10 metre 7478.70
Cost of 1 metre 747.87
Say 747.85
18.3 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with c
black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing o
joints complete as per direction of the engineer in charge.
External work
18.3.1 1216 (16 mm OD) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8300 1216 mm PE-AL-PE Composit pressure pipe metre 10.00 80.00 800.00
Add 30% for fittings and wastage etc. on (P) 240.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2057.32
Add 1 % Water charges on "W" 20.57
TOTAL 2077.89
Add GST on "X" (multiplying factor 0.1405) 291.94
TOTAL 2369.84
Add 15% CPOH on "Y" 355.48
TOTAL 2725.31
Add Cess @ 1% on "Z" 27.25
Cost of 10 metre 2752.57
Cost of 1 metre 275.26
Say 275.25

18.3.2 1620 (20 mm OD ) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8301 1620 mm PE-AL-PE Composit pressure pipe metre 10.00 90.00 900.00
Add 30% for fittings and wastage etc. on (P) 270.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2187.32
Add 1 % Water charges on "W" 21.87
TOTAL 2209.19
Add GST on "X" (multiplying factor 0.1405) 310.39
TOTAL 2519.58
Add 15% CPOH on "Y" 377.94
TOTAL 2897.52
Add Cess @ 1% on "Z" 28.98
Cost of 10 metre 2926.50
Cost of 1 metre 292.65
Say 292.65
18.3.3 2025 (25 mm OD ) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8302 2025 mm PE-AL-PE Composit pressure pipe metre 10.00 140.00 1400.00
Add 30% for fittings and wastage etc. on (P) 420.00
30 x P / 100
P
WXYZ

LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2837.32
Add 1 % Water charges on "W" 28.37
TOTAL 2865.69
Add GST on "X" (multiplying factor 0.1405) 402.63
TOTAL 3268.32
Add 15% CPOH on "Y" 490.25
TOTAL 3758.57
Add Cess @ 1% on "Z" 37.59
Cost of 10 metre 3796.16
Cost of 1 metre 379.62
Say 379.60

18.3.4 2532 (32 mm OD ) pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8303 2532 mm PE-AL-PE Composit pressure pipe metre 10.00 180.00 1800.00
Add 30% for fittings and wastage etc. on (P) 540.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 3357.32
Add 1 % Water charges on "W" 33.57
TOTAL 3390.89
Add GST on "X" (multiplying factor 0.1405) 476.42
TOTAL 3867.31
Add 15% CPOH on "Y" 580.10
TOTAL 4447.41
Add Cess @ 1% on "Z" 44.47
Cost of 10 metre 4491.88
Cost of 1 metre 449.19
Say 449.20

18.3.5 3240 (40 mm OD ) pipe

Code Description Unit Quantity Rate Rs. Amount Rs. P


Details of cost for 10 metre WXYZ
MATERIAL
8304 3240 mm PE-AL-PE Composit pressure pipe metre 10.00 280.00 2800.00
Add 30% for fittings and wastage etc. on (P) 840.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 4829.69
Add 1 % Water charges on "W" 48.30
TOTAL 4877.99
Add GST on "X" (multiplying factor 0.1405) 685.36
TOTAL 5563.34
Add 15% CPOH on "Y" 834.50
TOTAL 6397.85
Add Cess @ 1% on "Z" 63.98
Cost of 10 metre 6461.82
Cost of 1 metre 646.18
Say 646.20
18.3.6 4050 (50 mm OD ) pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8305 4050 mm PE-AL-PE Composit pressure pipe metre 10.00 360.00 3600.00
Add 30% for fittings and wastage etc. on (P) 1080.00
30 x P / 100
P
WXYZ

LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 5869.69
Add 1 % Water charges on "W" 58.70
TOTAL 5928.39
Add GST on "X" (multiplying factor 0.1405) 832.94
TOTAL 6761.33
Add 15% CPOH on "Y" 1014.20
TOTAL 7775.52
Add Cess @ 1% on "Z" 77.76
Cost of 10 metre 7853.28
Cost of 1 metre 785.33
Say 785.35
18.4 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - micro
fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fitting
fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.
Internal Exposed on walls
18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 48.46 484.60
(SDR 7.4) - 20 mm Outer dia
Add 30% for fittings, clamps and wastage etc. on P, 145.38
30xP/100
9999 Cement, Sand and grit L.S. 2.73 2.12 5.79
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.82 714.00 585.48
0114 Beldar day 0.66 645.00 425.70
TOTAL 1905.67
Add 1 % Water charges on "W" 19.06
TOTAL 1924.72
Add GST on "X" (multiplying factor 0.1405) 270.42
TOTAL 2195.15
Add 15% CPOH on "Y" 329.27
TOTAL 2524.42
Add Cess @ 1% on "Z" 25.24
Cost of 10 metre 2549.66
Cost of 1 metre 254.97
Say 254.95
18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 74.82 748.20
(SDR 7.4) - 25 mm Outer dia
Add 30% for fittings, clamps and wastage etc. on P, 224.46
30xP/100
9999 Cement,Sand and grit L.S. 2.73 2.12 5.79
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 2362.59
Add 1 % Water charges on "W" 23.63
TOTAL 2386.21
Add GST on "X" (multiplying factor 0.1405) 335.26
TOTAL 2721.48
Add 15% CPOH on "Y" 408.22
TOTAL 3129.70
Add Cess @ 1% on "Z" 31.30
Cost of 10 metre 3160.99
Cost of 1 metre 316.10
Say 316.10

18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4)

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 107.47 1074.70
(SDR 7.4) - 32 mm Outer dia
Add 20% for fittings, clamps and wastage etc. on P, 214.94
20xP/100
9999 Cement, Sand and grit L.S. 4.16 2.12 8.82
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 2682.60
Add 1 % Water charges on "W" 26.83
TOTAL 2709.43
Add GST on "X" (multiplying factor 0.1405) 380.67
TOTAL 3090.10
Add 15% CPOH on "Y" 463.51
TOTAL 3553.61
Add Cess @ 1% on "Z" 35.54
Cost of 10 metre 3589.15
Cost of 1 metre 358.92
Say 358.90
18.4.4 PN - 16 Pipe, 40mm OD (SDR-7.4)
P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y
Details of cost for 10 metre Z
MATERIAL:
8629 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 162.00 1620.00
(SDR 7.4) - 40 mm Outer dia
Add 15% for fittings, clamps and wastage etc. on P, 243.00
15xP/100
9999 Cement, Sand and grit L.S. 5.33 2.12 11.30
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 3913.31
Add 1 % Water charges on "W" 39.13
TOTAL 3952.44
Add GST on "X" (multiplying factor 0.1405) 555.32
TOTAL 4507.76
Add 15% CPOH on "Y" 676.16
TOTAL 5183.93
Add Cess @ 1% on "Z" 51.84
Cost of 10 metre 5235.76
Cost of 1 metre 523.58
Say 523.60

18.4.5 PN - 10 Pipe, 50mm OD (SDR-11)

P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 10 metre
MATERIAL:
8630 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 metre 10.00 255.00 2550.00
(SDR 11) - 50 mm Outer dia
Add 15% for fittings, clamps and wastage etc. on P, 382.50
15xP/100
9999 Cement, Sand and grit L.S. 5.33 2.12 11.30
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 4982.81
Add 1 % Water charges on "W" 49.83
TOTAL 5032.64
Add GST on "X" (multiplying factor 0.1405) 707.09
TOTAL 5739.72
Add 15% CPOH on "Y" 860.96
TOTAL 6600.68
Add Cess @ 1% on "Z" 66.01
Cost of 10 metre 6666.69
Cost of 1 metre 666.67
Say 666.65
18.5 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV
stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene ra
fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints com
as per direction of Engineer-in-Charge.
Concealed work,including cutting chases and making good the wall etc.
18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL:
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 48.46 484.60
(SDR 7.4) - 20 mm Outer dia
Add 75% for fittings, clamps and wastage etc. on P, 363.45
75xP/100
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
18.78 Rate as per Item Number 18.78 of SH: Water supply metre 10.00 171.80 1718.00
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 3721.71
Add 1 % Water charges on "W-A" 20.04
TOTAL 3741.75
Add GST on "X-A" (multiplying factor 0.1405) 284.34
TOTAL 4026.08
Add 15% CPOH on "Y-A" 346.21
TOTAL 4372.30
Add Cess @ 1% on "Z-A" 26.54
Cost of 10 metre 4398.84
Cost of 1 metre 439.88
Say 439.90

18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4)


P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL:
8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 74.82 748.20
(SDR 7.4) - 25 mm Outer dia
Add 75% for fittings, clamps and wastage etc. on P, 561.15
75xP/100
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
18.78 Rate as per Item Number 18.78 of SH: Water supply metre 10.00 171.80 1718.00
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4183.01
Add 1 % Water charges on "W-A" 24.65
TOTAL 4207.66
Add GST on "X-A" (multiplying factor 0.1405) 349.80
TOTAL 4557.46
Add 15% CPOH on "Y-A" 425.92
TOTAL 4983.38
Add Cess @ 1% on "Z-A" 32.65
Cost of 10 metre 5016.03
Cost of 1 metre 501.60
Say 501.60
18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4)
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXY
MATERIAL: Z
8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 107.47 1074.70
(SDR 7.4) - 32 mm Outer dia
Add 50% for fittings, clamps and wastage etc. on P, 537.35
50xP/100
Making chases upto 7.5 x 7.5 cm. in walls and making
good the same
18.78 Rate as per Item Number 18.78 of SH: Water supply metre 10.00 171.80 1718.00
LABOUR:
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4485.71
Add 1 % Water charges on "W-A" 27.68
TOTAL 4513.39
Add GST on "X-A" (multiplying factor 0.1405) 392.75
TOTAL 4906.14
Add 15% CPOH on "Y-A" 478.22
TOTAL 5384.36
Add Cess @ 1% on "Z-A" 36.66
Cost of 10 metre 5421.02
Cost of 1 metre 542.10
Say 542.10
18.6 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusio
welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trench
refilling & testing of joints complete as per direction of Engineer-in-Charge.
External work
18.6.1 PN - 16 Pipe, 20mm OD (SDR-7.4)

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 48.46 484.60
(SDR 7.4) - 20 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 96.92
LABOUR:
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 1598.84
Add 1 % Water charges on "W" 15.99
TOTAL 1614.83
Add GST on "X" (multiplying factor 0.1405) 226.88
TOTAL 1841.71
Add 15% CPOH on "Y" 276.26
TOTAL 2117.97
Add Cess @ 1% on "Z" 21.18
Cost of 10 metre 2139.15
Cost of 1 metre 213.91
Say 213.90
18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR metre 10.00 74.82 748.20
7.4) - 25 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 149.64
Z

LABOUR:
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2004.57
Add 1 % Water charges on "W" 20.05
TOTAL 2024.62
Add GST on "X" (multiplying factor 0.1405) 284.46
TOTAL 2309.07
Add 15% CPOH on "Y" 346.36
TOTAL 2655.44
Add Cess @ 1% on "Z" 26.55
Cost of 10 metre 2681.99
Cost of 1 metre 268.20
Say 268.20

18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4)


P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 107.47 1074.70
(SDR 7.4) - 32 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 214.94
LABOUR:
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2396.37
Add 1 % Water charges on "W" 23.96
TOTAL 2420.33
Add GST on "X" (multiplying factor 0.1405) 340.06
TOTAL 2760.39
Add 15% CPOH on "Y" 414.06
TOTAL 3174.45
Add Cess @ 1% on "Z" 31.74
Cost of 10 metre 3206.19
Cost of 1 metre 320.62
Say 320.60
18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8629 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 metre 10.00 162.00 1620.00
(SDR 7.4) - 40 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 324.00
LABOUR:
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 3133.69
Add 1 % Water charges on "W" 31.34
TOTAL 3165.03
Add GST on "X" (multiplying factor 0.1405) 444.69
TOTAL 3609.71
Add 15% CPOH on "Y" 541.46
TOTAL 4151.17
Add Cess @ 1% on "Z" 41.51
Cost of 10 metre 4192.68
Cost of 1 metre 419.27
Say 419.25

18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11)

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8630 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR metre 10.00 255.00 2550.00
11) - 50 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 510.00
LABOUR:
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 4249.69
Add 1 % Water charges on "W" 42.50
TOTAL 4292.19
Add GST on "X" (multiplying factor 0.1405) 603.05
TOTAL 4895.24
Add 15% CPOH on "Y" 734.29
TOTAL 5629.53
Add Cess @ 1% on "Z" 56.30
Cost of 10 metre 5685.82
Cost of 1 metre 568.58
Say 568.60
18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8631 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 metre 10.00 285.00 2850.00
(SDR 11) - 63 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 570.00
LABOUR:
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 coolie day 0.66 645.00 425.70
TOTAL 4893.10
Add 1 % Water charges on "W" 48.93
TOTAL 4942.03
Add GST on "X" (multiplying factor 0.1405) 694.36
TOTAL 5636.39
Add 15% CPOH on "Y" 845.46
TOTAL 6481.84
Add Cess @ 1% on "Z" 64.82
Cost of 10 metre 6546.66
Cost of 1 metre 654.67
Say 654.65

18.6.7 PN - 10 Pipe, 75 mm OD (SDR-11)


P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL:
8632 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 metre 10.00 425.00 4250.00
(SDR 11) - 75 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 850.00
LABOUR:
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 6573.10
Add 1 % Water charges on "W" 65.73
TOTAL 6638.83
Add GST on "X" (multiplying factor 0.1405) 932.76
TOTAL 7571.59
Add 15% CPOH on "Y" 1135.74
TOTAL 8707.32
Add Cess @ 1% on "Z" 87.07
Cost of 10 metre 8794.40
Cost of 1 metre 879.44
Say 879.45
18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8633 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR metre 10.00 600.00 6000.00
11) - 90 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 1200.00
LABOUR:
0116 Fitter (grade 1) day 0.37 784.00 290.08
0114 Beldar day 0.97 645.00 625.65
Trenching and refilling etc.
0114 Beldar day 0.80 645.00 516.00
0115 Beldar day 0.80 645.00 516.00
TOTAL 9147.73
Add 1 % Water charges on "W" 91.48
TOTAL 9239.21
Add GST on "X" (multiplying factor 0.1405) 1298.11
TOTAL 10537.32
Add 15% CPOH on "Y" 1580.60
TOTAL 12117.91
Add Cess @ 1% on "Z" 121.18
Cost of 10 metre 12239.09
Cost of 1 metre 1223.91
Say 1223.90

18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11)

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8634 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR metre 10.00 890.00 8900.00
11) - 110 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 1780.00
LABOUR:
0116 Fitter (grade 1) day 0.37 784.00 290.08
0114 Beldar day 0.97 645.00 625.65
Trenching and refilling etc.
0114 Beldar day 0.80 645.00 516.00
0115 Coolie day 0.80 645.00 516.00
TOTAL 12627.73
Add 1 % Water charges on "W" 126.28
TOTAL 12754.01
Add GST on "X" (multiplying factor 0.1405) 1791.94
TOTAL 14545.95
Add 15% CPOH on "Y" 2181.89
TOTAL 16727.84
Add Cess @ 1% on "Z" 167.28
Cost of 10 metre 16895.12
Cost of 1 metre 1689.51
Say 1689.50
18.6.10 PN - 10 Pipe, 160 mm OD (SDR-11)
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL:
8635 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 metre 10.00 2575.00 25750.00
(SDR 11) - 160 mm Outer dia
Add 20% for fittings and wastage etc. on P, 20xP/100 5150.00
LABOUR:
0116 Fitter (grade 1) day 0.58 784.00 454.72
0114 Beldar day 1.54 645.00 993.30
Trenching and refilling etc.
0114 Beldar day 1.20 645.00 774.00
0115 Coolie day 1.20 645.00 774.00
TOTAL 33896.02
Add 1 % Water charges on "W" 338.96
TOTAL 34234.98
Add GST on "X" (multiplying factor 0.1405) 4810.01
TOTAL 39044.99
Add 15% CPOH on "Y" 5856.75
TOTAL 44901.74
Add Cess @ 1% on "Z" 449.02
Cost of 10 metre 45350.76
Cost of 1 metre 4535.08
Say 4535.10

18.6A
Providing and fixing PPR Unions PPR Union 20mm
18.6A.1

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8306 PPR Union 20mm each 1.00 60.00 60.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXY
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 221.05
Add 1 % Water charges on "W" 2.21
TOTAL 223.26
Add GST on "X" (multiplying factor 0.1405) 31.37
TOTAL 254.63
Add 15% CPOH on "Y" 38.19
TOTAL 292.82
Add Cess @ 1% on "Z" 2.93
Cost of 1 No 295.75
Say 295.75
18.6A.2 PPR Union 25mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8307 PPR Union 25mm each 1.00 110.00 110.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXY
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 271.05
Add 1 % Water charges on "W" 2.71
TOTAL 273.76
Add GST on "X" (multiplying factor 0.1405) 38.46
TOTAL 312.22
Add 15% CPOH on "Y" 46.83
TOTAL 359.06
Add Cess @ 1% on "Z" 3.59
Cost of 1 No 362.65
Say 362.65

18.6A.3 PPR Union 32mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8308 PPR Union 32mm each 1.00 150.00 150.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXYZ
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 311.05
Add 1 % Water charges on "W" 3.11
TOTAL 314.16
Add GST on "X" (multiplying factor 0.1405) 44.14
TOTAL 358.30
Add 15% CPOH on "Y" 53.74
TOTAL 412.04
Add Cess @ 1% on "Z" 4.12
Cost of 1 No 416.16
Say 416.15

18.6A.4 PPR Union 40mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8309 PPR Union 40mm each 1.00 220.00 220.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 381.05
Add 1 % Water charges on "W" 3.81
TOTAL 384.86
Add GST on "X" (multiplying factor 0.1405) 54.07
TOTAL 438.93
Add 15% CPOH on "Y" 65.84
TOTAL 504.77
Add Cess @ 1% on "Z" 5.05
Cost of 1 No 509.82
Say 509.80
18.6A.5 PPR Union 50mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8310 PPR Union 50mm each 1.00 410.00 410.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXY
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 571.05
Add 1 % Water charges on "W" 5.71
TOTAL 576.76
Add GST on "X" (multiplying factor 0.1405) 81.03
TOTAL 657.79
Add 15% CPOH on "Y" 98.67
TOTAL 756.46
Add Cess @ 1% on "Z" 7.56
Cost of 1 No 764.03
Say 764.05

18.6A.6 PPR Union 63mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8311 PPR Union 63mm each 1.00 550.00 550.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXY
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 711.05
Add 1 % Water charges on "W" 7.11
TOTAL 718.16
Add GST on "X" (multiplying factor 0.1405) 100.90
TOTAL 819.06
Add 15% CPOH on "Y" 122.86
TOTAL 941.92
Add Cess @ 1% on "Z" 9.42
Cost of 1 No 951.34
Say 951.35

18.6A.7 PPR Union 75mm

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No
MATERIAL:
8312 PPR Union 75mm each 1.00 1100.00 1100.00
9999 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR:
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 1261.05
Add 1 % Water charges on "W" 12.61
TOTAL 1273.66
Add GST on "X" (multiplying factor 0.1405) 178.95
TOTAL 1452.61
Add 15% CPOH on "Y" 217.89
TOTAL 1670.50
Add Cess @ 1% on "Z" 16.70
Cost of 1 No 1687.20
Say 1687.20
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, including fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Ch
Internal work - Exposed on wall

18.7.1 15 mm nominal dia Pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia.
metre 10.00 49.00 490.00 P
Add 30% for fittings and wastage etc. on (P) 147.00 W X Y Z
30 x P / 100
9999 Cement, sand and grit etc. L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.82 714.00 585.48
0114 Beldar day 0.66 645.00 425.70
TOTAL 1912.69
Add 1 % Water charges on "W" 19.13
TOTAL 1931.81
Add GST on "X" (multiplying factor 0.1405) 271.42
TOTAL 2203.23
Add 15% CPOH on "Y" 330.49
TOTAL 2533.72
Add Cess @ 1% on "Z" 25.34
Cost of 10 metre 2559.06
Cost of 1 metre 255.91
Say 255.90

18.7.2 20 mm nominal dia Pipes


P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia.
metre 10.00 80.00 800.00
Add 30% for fittings and wastage etc. on (P) 240.00
30 x P / 100
9999 Cement, sand and grit etc. L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 2429.93
Add 1 % Water charges on "W" 24.30
TOTAL 2454.23
Add GST on "X" (multiplying factor 0.1405) 344.82
TOTAL 2799.05
Add 15% CPOH on "Y" 419.86
TOTAL 3218.90
Add Cess @ 1% on "Z" 32.19
Cost of 10 metre 3251.09
Cost of 1 metre 325.11
Say 325.10
18.7.3 25 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia.
metre 10.00 127.97 1279.70
Add 30% for fittings and wastage etc. on (P) 383.91
30 x P / 100
9999 Cement, sand and grit etc. L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 3053.54
Add 1 % Water charges on "W" 30.54
TOTAL 3084.07
Add GST on "X" (multiplying factor 0.1405) 433.31
TOTAL 3517.39
Add 15% CPOH on "Y" 527.61
TOTAL 4044.99
Add Cess @ 1% on "Z" 40.45
Cost of 10 metre 4085.44
Cost of 1 metre 408.54
Say 408.55

18.7.4 32 mm nominal dia Pipes

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia.
metre 10.00 165.00 1650.00
Add 30% for fittings and wastage etc. on (P) 495.00
30 x P / 100
9999 Cement, sand and grit etc. L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.98 645.00 632.10
TOTAL 3744.36
Add 1 % Water charges on "W" 37.44
TOTAL 3781.80
Add GST on "X" (multiplying factor 0.1405) 531.34
TOTAL 4313.15
Add 15% CPOH on "Y" 646.97
TOTAL 4960.12
Add Cess @ 1% on "Z" 49.60
Cost of 10 metre 5009.72
Cost of 1 metre 500.97
Say 500.95

18.7.5 40 mm nominal dia Pipes

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia.
metre 10.00 230.00 2300.00
Add 30% for fittings and wastage etc. on (P) 690.00
30 x P / 100
9999 Cement, sand and grit etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 5040.31
Add 1 % Water charges on "W" 50.40
TOTAL 5090.71
Add GST on "X" (multiplying factor 0.1405) 715.25
TOTAL 5805.96
Add 15% CPOH on "Y" 870.89
TOTAL 6676.85
Add Cess @ 1% on "Z" 66.77
Cost of 10 metre 6743.62
Cost of 1 metre 674.36
Say 674.35
18.7.6 50 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Z
Details of cost for 10 metre
MATERIAL
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia.
metre 10.00 375.25 3752.50
Add 30% for fittings and wastage etc. on (P) 1125.75
30 x P / 100
9999 Cement, sand and grit etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 6928.56
Add 1 % Water charges on "W" 69.29
TOTAL 6997.85
Add GST on "X" (multiplying factor 0.1405) 983.20
TOTAL 7981.04
Add 15% CPOH on "Y" 1197.16
TOTAL 9178.20
Add Cess @ 1% on "Z" 91.78
Cost of 10 metre 9269.98
Cost of 1 metre 927.00
Say 927.00
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the
of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal dia Pipes

P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
P
A
WXYZ
MATERIAL
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia.
metre 10.00 49.00 490.00
Add 75% for fittings, clamps and wastage etc. on (P) 367.50
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 3731.16
Add 1 % Water charges on "W-A" 20.13
TOTAL 3751.29
Add GST on "X-A" (multiplying factor 0.1405) 285.68
TOTAL 4036.97
Add 15% CPOH on "Y-A" 347.85
TOTAL 4384.81
Add Cess @ 1% on "Z-A" 26.67
Cost of 10 metre 4411.48
Cost of 1 metre 441.15
Say 441.15
18.8.2 20 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia.
metre 10.00 80.00 800.00
Add 75% for fittings, clamps and wastage etc. on (P) 600.00
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4273.66
Add 1 % Water charges on "W-A" 25.56
TOTAL 4299.22
Add GST on "X-A" (multiplying factor 0.1405) 362.66
TOTAL 4661.88
Add 15% CPOH on "Y-A" 441.58
TOTAL 5103.46
Add Cess @ 1% on "Z-A" 33.85
Cost of 10 metre 5137.31
Cost of 1 metre 513.73
Say 513.75

18.8.3 25 mm nominal dia Pipes


P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia.
metre 10.00 127.97 1279.70
Add 75% for fittings, clamps and wastage etc. on (P) 959.78
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 5113.14
Add 1 % Water charges on "W-A" 33.95
TOTAL 5147.09
Add GST on "X-A" (multiplying factor 0.1405) 481.79
TOTAL 5628.87
Add 15% CPOH on "Y-A" 586.63
TOTAL 6215.50
Add Cess @ 1% on "Z-A" 44.98
Cost of 10 metre 6260.48
Cost of 1 metre 626.05
Say 626.05
18.8.4 32 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXY
MATERIAL Z
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia.
metre 10.00 165.00 1650.00
Add 75% for fittings, clamps and wastage etc. on (P) 1237.50
75 x P / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the
same
18.78 Rate as per item no. 18.78 Of SH: Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 5761.16
Add 1 % Water charges on "W-A" 40.43
TOTAL 5801.59
Add GST on "X-A" (multiplying factor 0.1405) 573.74
TOTAL 6375.34
Add 15% CPOH on "Y-A" 698.60
TOTAL 7073.94
Add Cess @ 1% on "Z-A" 53.56
Cost of 10 metre 7127.50
Cost of 1 metre 712.75
Say 712.75
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per
direction of Engineer in Charge.
External work
18.9.1 15 mm nominal dia Pipes

Code Description Unit Quantity Rate Rs. Amount Rs. P


Details of cost for 10 metre WXYZ
MATERIAL
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia.
metre 10.00 49.00 490.00
Add 30% for fittings and wastage etc. on (P) 147.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 1654.32
Add 1 % Water charges on "W" 16.54
TOTAL 1670.86
Add GST on "X" (multiplying factor 0.1405) 234.76
TOTAL 1905.62
Add 15% CPOH on "Y" 285.84
TOTAL 2191.46
Add Cess @ 1% on "Z" 21.91
Cost of 10 metre 2213.38
Cost of 1 metre 221.34
Say 221.35

18.9.2 20 mm nominal dia Pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia.
metre 10.00 80.00 800.00 P
Add 30% for fittings and wastage etc. on (P) 240.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70

0115 Coolie day 0.66 645.00 425.70 W X Y


TOTAL 2057.32 Z
Add 1 % Water charges on "W" 20.57
TOTAL 2077.89
Add GST on "X" (multiplying factor 0.1405) 291.94
TOTAL 2369.84
Add 15% CPOH on "Y" 355.48
TOTAL 2725.31
Add Cess @ 1% on "Z" 27.25
Cost of 10 metre 2752.57
Cost of 1 metre 275.26
Say 275.25

18.9.3 25 mm nominal dia Pipes

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia.
metre 10.00 127.97 1279.70
Add 30% for fittings and wastage etc. on (P) 383.91
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2770.34
Add 1 % Water charges on "W" 27.70
TOTAL 2798.04
Add GST on "X" (multiplying factor 0.1405) 393.13
TOTAL 3191.17
Add 15% CPOH on "Y" 478.68
TOTAL 3669.84
Add Cess @ 1% on "Z" 36.70
Cost of 10 metre 3706.54
Cost of 1 metre 370.65
Say 370.65

18.9.4 32 mm nominal dia Pipes

Code Description Unit Quantity Rate Rs. Amount Rs. P


Details of cost for 10 metre WXYZ
MATERIAL
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm nominal dia.
metre 10.00 165.00 1650.00
Add 30% for fittings and wastage etc. on (P) 495.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 3251.73
Add 1 % Water charges on "W" 32.52
TOTAL 3284.25
Add GST on "X" (multiplying factor 0.1405) 461.44
TOTAL 3745.68
Add 15% CPOH on "Y" 561.85
TOTAL 4307.54
Add Cess @ 1% on "Z" 43.08
Cost of 10 metre 4350.61
Cost of 1 metre 435.06
Say 435.05
18.9.5 40 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia.
metre 10.00 230.00 2300.00
Add 30% for fittings and wastage etc. on (P) 690.00
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 4179.69
Add 1 % Water charges on "W" 41.80
TOTAL 4221.49
Add GST on "X" (multiplying factor 0.1405) 593.12
TOTAL 4814.61
Add 15% CPOH on "Y" 722.19
TOTAL 5536.80
Add Cess @ 1% on "Z" 55.37
Cost of 10 metre 5592.16
Cost of 1 metre 559.22
Say 559.20

18.9.6 50 mm nominal dia Pipes


Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXYZ
MATERIAL
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia.
metre 10.00 375.25 3752.50
Add 30% for fittings and wastage etc. on (P) 1125.75
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 6067.94
Add 1 % Water charges on "W" 60.68
TOTAL 6128.62
Add GST on "X" (multiplying factor 0.1405) 861.07
TOTAL 6989.69
Add 15% CPOH on "Y" 1048.45
TOTAL 8038.14
Add Cess @ 1% on "Z" 80.38
Cost of 10 metre 8118.53
Cost of 1 metre 811.85
Say 811.85

18.9.7 65 mm nominal dia Pipes


P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 65 mm nominal dia.
metre 10.00 793.30 7933.00
Add 30% for fittings and wastage etc. on (P) 2379.90
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 11786.00
Add 1 % Water charges on "W" 117.86
TOTAL 11903.86
Add GST on "X" (multiplying factor 0.1405) 1672.49
TOTAL 13576.35
Add 15% CPOH on "Y" 2036.45
TOTAL 15612.81
Add Cess @ 1% on "Z" 156.13
Cost of 10 metre 15768.93
Cost of 1 metre 1576.89
Say 1576.90
18.9.8 80 mm nominal dia Pipes
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXY
Details of cost for 10 metre Z
MATERIAL
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 80 mm nominal dia.
metre 10.00 1031.05 10310.50
Add 30% for fittings and wastage etc. on (P) 3093.15
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 14876.75
Add 1 % Water charges on "W" 148.77
TOTAL 15025.52
Add GST on "X" (multiplying factor 0.1405) 2111.09
TOTAL 17136.60
Add 15% CPOH on "Y" 2570.49
TOTAL 19707.09
Add Cess @ 1% on "Z" 197.07
Cost of 10 metre 19904.16
Cost of 1 metre 1990.42
Say 1990.40
18.9.9 100 mm nominal dia Pipes
Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXYZ
MATERIAL
8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm nominal
dia. metre 10.00 1466.75 14667.50
Add 30% for fittings and wastage etc. on (P) 4400.25
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.37 784.00 290.08
0114 Beldar day 0.97 645.00 625.65
Trenching and refilling etc.
0114 Beldar day 0.80 645.00 516.00
0115 Coolie day 0.80 645.00 516.00
TOTAL 21015.48
Add 1 % Water charges on "W" 210.15
TOTAL 21225.63
Add GST on "X" (multiplying factor 0.1405) 2982.20
TOTAL 24207.84
Add 15% CPOH on "Y" 3631.18
TOTAL 27839.01
Add Cess @ 1% on "Z" 278.39
Cost of 10 metre 28117.40
Cost of 1 metre 2811.74
Say 2811.75
18.9.10 150 mm nominal dia Pipes
Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXYZ
MATERIAL
8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm nominal
dia. metre 10.00 3145.15 31451.50
Add 30% for fittings and wastage etc. on (P) 9435.45
30 x P / 100
LABOUR
0116 Fitter (grade 1) day 0.58 784.00 454.72
0114 Beldar day 1.54 645.00 993.30
Trenching and refilling etc.
0114 Beldar day 1.20 645.00 774.00
0115 Coolie day 1.20 645.00 774.00
TOTAL 43882.97
Add 1 % Water charges on "W" 438.83
TOTAL 44321.80
Add GST on "X" (multiplying factor 0.1405) 6227.21
TOTAL 50549.01
Add 15% CPOH on "Y" 7582.35
TOTAL 58131.36
Add Cess @ 1% on "Z" 581.31
Cost of 10 metre 58712.68
Cost of 1 metre 5871.27
Say 5871.25
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the
walls etc.

Internal work - Exposed on wall

18.10.1 15 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1545 G.I. pipes 15 mm dia metre 11.50 95.00 1092.50
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
12.30 = 14.145 kg = 0.014145 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.014145 145.72 2.06
9999 White lead, hemp, oil etc. L.S. 8.06 2.12 17.09
9999 Cement, sand and grit etc. L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 2273.10
Add 1 % Water charges on "W" 22.73
TOTAL 2295.83
Add GST on "X" (multiplying factor 0.1405) 322.56
TOTAL 2618.39
Add 15% CPOH on "Y" 392.76
TOTAL 3011.15 W X Y Z
Add Cess @ 1% on "Z" 30.11
Cost of 10 metre 3041.26
Cost of 1 metre 304.13
Say 304.15

18.10.2 20 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1546 G.I. pipes 20 mm dia metre 11.50 130.00 1495.00
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
15.90= 18.285 kg = 0.018285 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.018285 145.72 2.66
9999 White lead, hemp, oil etc. L.S. 8.06 2.12 17.09
9999 Cement, sand and grit etc. L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.82 714.00 585.48
0114 Beldar day 0.66 645.00 425.70
TOTAL 2790.44
Add 1 % Water charges on "W" 27.90
TOTAL 2818.34
Add GST on "X" (multiplying factor 0.1405) 395.98
TOTAL 3214.32
Add 15% CPOH on "Y" 482.15
TOTAL 3696.47 W X Y Z
Add Cess @ 1% on "Z" 36.96
Cost of 10 metre 3733.43
Cost of 1 metre 373.34
Say 373.35
18.10.3 25 mm dia nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1547 G.I. pipes 25 mm dia metre 11.50 196.00 2254.00
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
24.60 = 28.29 kg = 0.02829 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.02829 145.72 4.12
9999 White lead, hemp, oil etc. L.S. 9.49 2.12 20.12
9999 Cement, sand and grit etc. L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.66 645.00 425.70
TOTAL 3671.20
Add 1 % Water charges on "W" 36.71
TOTAL 3707.91
Add GST on "X" (multiplying factor 0.1405) 520.96
TOTAL 4228.87
Add 15% CPOH on "Y" 634.33 W X Y
TOTAL 4863.21 Z
Add Cess @ 1% on "Z" 48.63
Cost of 10 metre 4911.84
Cost of 1 metre 491.18
Say 491.20
18.10.4 32 mm dia nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1548 G.I. pipes 32 mm dia metre 11.50 225.00 2587.50
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
31.70 = 36.455 kg = 0.036455 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.036455 145.72 5.31
9999 White lead, hemp, oil etc. L.S. 9.49 2.12 20.12
9999 Cement, sand and grit etc. L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.98 714.00 699.72
0114 Beldar day 0.98 645.00 632.10
TOTAL 4212.29
Add 1 % Water charges on "W" 42.12
TOTAL 4254.41
Add GST on "X" (multiplying factor 0.1405) 597.75
TOTAL 4852.16
Add 15% CPOH on "Y" 727.82
TOTAL 5579.98 W X Y Z
Add Cess @ 1% on "Z" 55.80
Cost of 10 metre 5635.78
Cost of 1 metre 563.58
Say 563.60
18.10.5 40 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1549 G.I. pipes 40 mm dia metre 11.50 290.00 3335.00
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
36.50 = 41.975 kg = 0.041975 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.041975 145.72 6.12
9999 White lead, hemp, oil etc. L.S. 13.52 2.12 28.66
9999 Cement, sand and grit etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.31 714.00 935.34
0114 Beldar day 1.31 645.00 844.95
TOTAL 5420.09
Add 1 % Water charges on "W" 54.20
TOTAL 5474.29
Add GST on "X" (multiplying factor 0.1405) 769.14
TOTAL 6243.43
Add 15% CPOH on "Y" 936.51
TOTAL 7179.94 W X Y Z
Add Cess @ 1% on "Z" 71.80
Cost of 10 metre 7251.74
Cost of 1 metre 725.17
Say 725.15
18.10.6 50 mm dia nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1550 G.I. pipes 50 mm dia metre 11.50 360.00 4140.00
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
51.70 = 59.455 kg = 0.059455 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.059455 145.72 8.66
9999 White lead, hemp, oil etc. L.S. 13.52 2.12 28.66
9999 Cement, sand and grit etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 1.64 714.00 1170.96
0114 Beldar day 1.64 645.00 1057.80
TOTAL 6676.11
Add 1 % Water charges on "W" 66.76
TOTAL 6742.87
Add GST on "X" (multiplying factor 0.1405) 947.37
TOTAL 7690.24
Add 15% CPOH on "Y" 1153.54 W X Y
TOTAL 8843.78 Z
Add Cess @ 1% on "Z" 88.44
Cost of 10 metre 8932.21
Cost of 1 metre 893.22
Say 893.20
18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti
corrosive bitumastic paint, cutting chases and making good the wall :
18.11.1 15 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1545 G.I. pipes 15 mm dia metre 11.50 95.00 1092.50
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
12.30 = 14.145 kg = 0.014145 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.014145 145.72 2.06
9999 White lead, hemp, oil etc. L.S. 8.06 2.12 17.09
Painting G.I. pipe with anti-corrosive bitumastic paint two or more
coats
18.40.1 (Rate same as per item no. 18.40.1) metre 10.00 10.05 100.50
Making chases upto 7.5x7.5cm in walls and making good the A
A
same WXYZ
18.78 Rate as per item no. 18.78 Of SH Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4085.81
Add 1 % Water charges on "W-A" 22.67
TOTAL 4108.48
Add GST on "X-A" (multiplying factor 0.1405) 321.74
TOTAL 4430.22
Add 15% CPOH on "Y-A" 391.76
TOTAL 4821.98
Add Cess @ 1% on "Z-A" 30.03
Cost of 10 metre 4852.02
Cost of 1 metre 485.20
Say 485.20
18.11.2 20 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1546 G.I. pipes 20 mm dia metre 11.50 130.00 1495.00
Weight for carriage = pipe weight + 15% for fiitings = 1.15 *
15.90= 18.285 kg = 0.018285 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.018285 145.72 2.66
9999 White lead, hemp, oil etc. L.S. 8.06 2.12 17.09
Painting G.I. pipe with anti-corrosive bitumastic paint two or more
coats
18.40.2 (Rate same as per item no. 18.40.2 Of SH Water Supply) metre 10.00 12.00 120.00
Making chases upto 7.5x7.5cm in walls and making good the A
A
same WXYZ
18.78 Rate as per item no. 18.78 Of SH Water Supply metre 10.00 171.80 1718.00
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4508.41
Add 1 % Water charges on "W-A" 26.70
TOTAL 4535.12
Add GST on "X-A" (multiplying factor 0.1405) 378.94
TOTAL 4914.06
Add 15% CPOH on "Y-A" 461.41
TOTAL 5375.47
Add Cess @ 1% on "Z-A" 35.37
Cost of 10 metre 5410.84
Cost of 1 metre 541.08
Say 541.10
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
18.12.1 15 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1545 G.I. pipes 15 mm dia metre 10.20 95.00 969.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 12.30
= 12.546 kg = 0.012546 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.012546 145.72 1.83
9999 White lead, hemp, oil etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 1999.45
Add 1 % Water charges on "W" 19.99
TOTAL 2019.44
Add GST on "X" (multiplying factor 0.1405) 283.73
TOTAL 2303.17
Add 15% CPOH on "Y" 345.48 W X Y
TOTAL 2648.65 Z
Add Cess @ 1% on "Z" 26.49
Cost of 10 metre 2675.14
Cost of 1 metre 267.51
Say 267.50
18.12.2 20 mm dia nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1546 G.I. pipes 20 mm dia metre 10.20 130.00 1326.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 15.90
= 16.218 kg = 0.016218 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.016218 145.72 2.36
9999 White lead, hemp, oil etc. L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.08 784.00 62.72
0114 Beldar day 0.16 645.00 103.20
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 2356.98
Add 1 % Water charges on "W" 23.57
TOTAL 2380.55
Add GST on "X" (multiplying factor 0.1405) 334.47
TOTAL 2715.02
Add 15% CPOH on "Y" 407.25
TOTAL 3122.27 W X Y Z
Add Cess @ 1% on "Z" 31.22
Cost of 10 metre 3153.50
Cost of 1 metre 315.35
Say 315.35

18.12.3 25 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1547 G.I. pipes 25 mm dia metre 10.20 196.00 1999.20
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 24.60
= 25.092 kg = 0.025092 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.025092 145.72 3.66
9999 White lead, hemp, oil etc. L.S. 6.76 2.12 14.33
LABOUR
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 3123.92
Add 1 % Water charges on "W" 31.24
TOTAL 3155.16
Add GST on "X" (multiplying factor 0.1405) 443.30
TOTAL 3598.46
Add 15% CPOH on "Y" 539.77
TOTAL 4138.22 W X Y Z
Add Cess @ 1% on "Z" 41.38
Cost of 10 metre 4179.61
Cost of 1 metre 417.96
Say 417.95

18.12.4 32 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1548 G.I. pipes 32 mm dia metre 10.20 225.00 2295.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 31.70
= 32.334 kg = 0.032334 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.032334 145.72 4.71
9999 White lead, hemp, oil etc. L.S. 6.76 2.12 14.33
LABOUR
0116 Fitter (grade 1) day 0.12 784.00 94.08
0114 Beldar day 0.25 645.00 161.25
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70

0115 Coolie day 0.66 645.00 425.70 W X Y


TOTAL 3420.77 Z
Add 1 % Water charges on "W" 34.21
TOTAL 3454.98
Add GST on "X" (multiplying factor 0.1405) 485.42
TOTAL 3940.41
Add 15% CPOH on "Y" 591.06
TOTAL 4531.47
Add Cess @ 1% on "Z" 45.31
Cost of 10 metre 4576.78
Cost of 1 metre 457.68
Say 457.70

18.12.5 40 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1549 G.I. pipes 40 mm dia metre 10.20 290.00 2958.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 36.50
= 37.23 kg = 0.03723 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.03723 145.72 5.43
9999 White lead, hemp, oil etc. L.S. 9.49 2.12 20.12
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 4173.23
Add 1 % Water charges on "W" 41.73
TOTAL 4214.97
Add GST on "X" (multiplying factor 0.1405) 592.20
TOTAL 4807.17
Add 15% CPOH on "Y" 721.08
TOTAL 5528.24 W X Y Z
Add Cess @ 1% on "Z" 55.28
Cost of 10 metre 5583.53
Cost of 1 metre 558.35
Say 558.35

18.12.6 50 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1550 G.I. pipes 50 mm dia metre 10.20 360.00 3672.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 51.70
= 52.73 kg = 0.05273 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.052734 145.72 7.68
9999 White lead, hemp, oil etc. L.S. 9.49 2.12 20.12
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.33 645.00 212.85
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 4889.49
Add 1 % Water charges on "W" 48.89
TOTAL 4938.39
Add GST on "X" (multiplying factor 0.1405) 693.84
TOTAL 5632.23
Add 15% CPOH on "Y" 844.83
TOTAL 6477.07 W X Y Z
Add Cess @ 1% on "Z" 64.77
Cost of 10 metre 6541.84
Cost of 1 metre 654.18
Say 654.20
18.12.7 65 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1551 G.I. pipes 65 mm dia metre 10.20 415.00 4233.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 66.30
= 67.626 kg = 0.067626 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.067626 145.72 9.85
9999 White lead, hemp, oil etc. L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 5744.62
Add 1 % Water charges on "W" 57.45
TOTAL 5802.06
Add GST on "X" (multiplying factor 0.1405) 815.19
TOTAL 6617.25
Add 15% CPOH on "Y" 992.59
TOTAL 7609.84 W X Y Z
Add Cess @ 1% on "Z" 76.10
Cost of 10 metre 7685.94
Cost of 1 metre 768.59
Say 768.60

18.12.8 80 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1552 G.I. pipes 80 mm dia metre 10.20 525.00 5355.00
Weight for carriage = pipe weight + 2% for fiitings = 1.02 * 86.40
= 88.128 kg = 0.088128 tonne
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.088128 145.72 12.84
9999 White lead, hemp, oil etc. L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.66 645.00 425.70
Trenching and refilling etc.
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.66 645.00 425.70
TOTAL 6869.60
Add 1 % Water charges on "W" 68.70
TOTAL 6938.30
Add GST on "X" (multiplying factor 0.1405) 974.83
TOTAL 7913.13
Add 15% CPOH on "Y" 1186.97
TOTAL 9100.10 W X Y Z
Add Cess @ 1% on "Z" 91.00
Cost of 10 metre 9191.10
Cost of 1 metre 919.11
Say 919.10
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pi
etc. complete :
18.13.1 25 to 40 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one connection.
Take 25mm dia as an average size.
MATERIAL
1608 G.I. tees (equal) 25 mm each 1.00 65.00 65.00
1555 G.I. back (jam) nuts 25 mm dia each 1.00 18.00 18.00
9988 Carriage of materials and sundries L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85
TOTAL 565.87
Add 1 % Water charges on "W" 5.66
TOTAL 571.53
Add GST on "X" (multiplying factor 0.1405) 80.30
TOTAL 651.83
Add 15% CPOH on "Y" 97.77 W X Y
TOTAL 749.60 Z
Add Cess @ 1% on "Z" 7.50
Cost of one connection 757.10
Say 757.10

18.13.2 50 to 80 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one connection.
Take 65mm dia as an average size.
MATERIAL
1612 G.I. tees (equal) 65 mm each 1.00 452.00 452.00
1559 G.I. back (jam) nuts 65 mm dia each 1.00 25.00 25.00
9988 Carriage of materials and sundries L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.45 784.00 352.80
0114 Beldar day 0.45 645.00 290.25
TOTAL 1131.35
Add 1 % Water charges on "W" 11.31
TOTAL 1142.66
Add GST on "X" (multiplying factor 0.1405) 160.54
TOTAL 1303.21
Add 15% CPOH on "Y" 195.48 W X Y
TOTAL 1498.69 Z
Add Cess @ 1% on "Z" 14.99
Cost of one connection 1513.68
Say 1513.70
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water m
and stop cock to be paid separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one meter with stop cock
MATERIAL
1555 G.I. back (jam) nuts 25 mm dia each 1.00 18.00 18.00
9988 Carriage of materials and sundries L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72 W X Y Z
0114 Beldar day 0.33 645.00 212.85
TOTAL 500.87
Add 1 % Water charges on "W" 5.01
TOTAL 505.88
WXYZ

Add GST on "X" (multiplying factor 0.1405) 71.08


TOTAL 576.95
Add 15% CPOH on "Y" 86.54
TOTAL 663.50
Add Cess @ 1% on "Z" 6.63
Cost of one metre with stop cock 670.13
Say 670.15
18.15 Providing and fixing brass bib cock of approved quality :
18.15.1 15 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1339 Brass bib-cock 15 mm dia each 1.00 210.00 210.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 227.09 W X Y
Add 1 % Water charges on "W" 2.27 Z
TOTAL 229.36
Add GST on "X" (multiplying factor 0.1405) 32.22
TOTAL 261.58
Add 15% CPOH on "Y" 39.24
TOTAL 300.82
Add Cess @ 1% on "Z" 3.01
Cost of one no. 303.83
Say 303.85
18.15.2 20 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for one no.
MATERIAL
1340 Brass bib-cock 20 mm dia each 1.00 225.00 225.00
9988 Carriage of materials and fixing charges L.S. 9.49 2.12 20.12
TOTAL 245.12
Add 1 % Water charges on "W" 2.45
TOTAL 247.57
Add GST on "X" (multiplying factor 0.1405) 34.78
TOTAL 282.35
Add 15% CPOH on "Y" 42.35
TOTAL 324.71
Add Cess @ 1% on "Z" 3.25
Cost of one no. 327.95
Say 327.95

18.16 Providing and fixing brass stop cock of approved quality :


18.16.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1342 Brass stop-cock 15 mm dia each 1.00 210.00 210.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 227.09 W X Y Z
Add 1 % Water charges on "W" 2.27
TOTAL 229.36
Add GST on "X" (multiplying factor 0.1405) 32.22
TOTAL 261.58
Add 15% CPOH on "Y" 39.24
TOTAL 300.82
Add Cess @ 1% on "Z" 3.01
Cost of one no. 303.83
Say 303.85

18.16.2 20 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1343 Brass stop-cock 20 mm dia each 1.00 225.00 225.00
9988 Carriage of materials and fixing charges L.S. 9.49 2.12 20.12
TOTAL 245.12 W X Y
Add 1 % Water charges on "W" 2.45 Z
TOTAL 247.57
Add GST on "X" (multiplying factor 0.1405) 34.78
TOTAL 282.35
Add 15% CPOH on "Y" 42.35
TOTAL 324.71
Add Cess @ 1% on "Z" 3.25
Cost of one no. 327.95
Say 327.95
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
18.17.1 25 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia
each 1.00 375.00 375.00
9988 Carriage of materials and fixing charges L.S. 10.79 2.12 22.87 W X Y
TOTAL 397.87 Z
Add 1 % Water charges on "W" 3.98
TOTAL 401.85
Add GST on "X" (multiplying factor 0.1405) 56.46
TOTAL 458.31
Add 15% CPOH on "Y" 68.75
TOTAL 527.06
Add Cess @ 1% on "Z" 5.27
Cost of one no. 532.33
Say 532.35

18.17.1A 20 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 No.
MATERIAL
1926 20 mm dia Gunmetal gate valve with wheel each 1.00 325.00 325.00
9977 Carriage of metrial and fixing charge L.S. 9.49 2.12 20.12
TOTAL 345.12 W X Y
Z
Add 1 % Water charges on "W" 3.45
TOTAL 348.57
Add GST on "X" (multiplying factor 0.1405) 48.97
TOTAL 397.54
Add 15% CPOH on "Y" 59.63
TOTAL 457.18
Add Cess @ 1% on "Z" 4.57
Cost of 1 No. 461.75
Say 461.75

18.17.2 32 mm nominal bore.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia
each 1.00 415.00 415.00
9988 Carriage of materials and fixing charges L.S. 12.22 2.12 25.91 W X Y
TOTAL 440.91 Z
Add 1 % Water charges on "W" 4.41
TOTAL 445.32
Add GST on "X" (multiplying factor 0.1405) 62.57
TOTAL 507.88
Add 15% CPOH on "Y" 76.18
TOTAL 584.06
Add Cess @ 1% on "Z" 5.84
Cost of one no. 589.91
Say 589.90

18.17.3 40 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia
each 1.00 500.00 500.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
WXY
TOTAL 528.66 Z
Add 1 % Water charges on "W" 5.29
TOTAL 533.95
Add GST on "X" (multiplying factor 0.1405) 75.02
TOTAL 608.97
Add 15% CPOH on "Y" 91.35
TOTAL 700.31
Add Cess @ 1% on "Z" 7.00
Cost of one no. 707.32
Say 707.30
18.17.4 50 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia
each 1.00 625.00 625.00
9988 Carriage of materials and fixing charges L.S. 14.82 2.12 31.42
TOTAL 656.42 W X Y Z
Add 1 % Water charges on "W" 6.56
TOTAL 662.98
Add GST on "X" (multiplying factor 0.1405) 93.15
TOTAL 756.13
Add 15% CPOH on "Y" 113.42
TOTAL 869.55
Add Cess @ 1% on "Z" 8.70
Cost of one no. 878.25
Say 878.25

18.17.5 65 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia
each 1.00 1080.00 1080.00
9988 Carriage of materials and fixing charges L.S. 16.12 2.12 34.17 W X Y
TOTAL 1114.17 Z
Add 1 % Water charges on "W" 11.14
TOTAL 1125.32
Add GST on "X" (multiplying factor 0.1405) 158.11
TOTAL 1283.42
Add 15% CPOH on "Y" 192.51
TOTAL 1475.94
Add Cess @ 1% on "Z" 14.76
Cost of one no. 1490.70
Say 1490.70

18.17.6 80 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia
each 1.00 1625.00 1625.00
9988 Carriage of materials and fixing charges L.S. 18.85 2.12 39.96
TOTAL 1664.96 W X Y Z
Add 1 % Water charges on "W" 16.65
TOTAL 1681.61
Add GST on "X" (multiplying factor 0.1405) 236.27
TOTAL 1917.88
Add 15% CPOH on "Y" 287.68
TOTAL 2205.56
Add Cess @ 1% on "Z" 22.06
Cost of one no. 2227.62
Say 2227.60
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
18.18.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 1.00 215.00 215.00
9988 Carriage of materials and fixing charges L.S. 21.58 2.12 45.75
TOTAL 260.75 W X Y Z
Add 1 % Water charges on "W" 2.61
TOTAL 263.36
Add GST on "X" (multiplying factor 0.1405) 37.00
TOTAL 300.36
Add 15% CPOH on "Y" 45.05
TOTAL 345.41
Add Cess @ 1% on "Z" 3.45
Cost of one no. 348.87
Say 348.85
18.18.2 20 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia each 1.00 240.00 240.00
9988 Carriage of materials and fixing charges L.S. 26.91 2.12 57.05
TOTAL 297.05 W X Y Z
Add 1 % Water charges on "W" 2.97
TOTAL 300.02
Add GST on "X" (multiplying factor 0.1405) 42.15
TOTAL 342.17
Add 15% CPOH on "Y" 51.33
TOTAL 393.50
Add Cess @ 1% on "Z" 3.93
Cost of one no. 397.43
Say 397.45

18.18.3 25 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for one no.
MATERIAL
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia each 1.00 230.00 230.00
9988 Carriage of materials and fixing charges L.S. 32.24 2.12 68.35
TOTAL 298.35
Add 1 % Water charges on "W" 2.98
TOTAL 301.33
Add GST on "X" (multiplying factor 0.1405) 42.34
TOTAL 343.67
Add 15% CPOH on "Y" 51.55
TOTAL 395.22
Add Cess @ 1% on "Z" 3.95
Cost of one no. 399.17
Say 399.15
18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :
18.19.1 25 mm nominal bore
18.19.1.1 Horizontal

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia
each 1.00 350.00 350.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 378.66 W X Y Z
Add 1 % Water charges on "W" 3.79
TOTAL 382.45
Add GST on "X" (multiplying factor 0.1405) 53.73
TOTAL 436.18
Add 15% CPOH on "Y" 65.43
TOTAL 501.61
Add Cess @ 1% on "Z" 5.02
Cost of one no. 506.63
Say 506.65

18.19.1.2 Vertical

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3080 Gunmetal non-return valve-vertical (screwed end) 25 mm dia each 1.00 400.00 400.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
TOTAL 428.66 W X Y
Z
Add 1 % Water charges on "W" 4.29
TOTAL 432.95
Add GST on "X" (multiplying factor 0.1405) 60.83
TOTAL 493.78
Add 15% CPOH on "Y" 74.07
TOTAL 567.85
Add Cess @ 1% on "Z" 5.68
Cost of one no. 573.52
Say 573.50
18.19.2 32 mm nominal bore
18.19.2.1 Horizontal
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia
each 1.00 475.00 475.00
9988 Carriage of materials and fixing charges L.S. 14.82 2.12 31.42
TOTAL 506.42 W X Y Z
Add 1 % Water charges on "W" 5.06
TOTAL 511.48
Add GST on "X" (multiplying factor 0.1405) 71.86
TOTAL 583.35
Add 15% CPOH on "Y" 87.50
TOTAL 670.85
Add Cess @ 1% on "Z" 6.71
Cost of one no. 677.56
Say 677.55

18.19.2.2 Vertical

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3084 Gunmetal non-return valve-vertical (screwed end) 32 mm dia each 1.00 550.00 550.00
9988 Carriage of materials and fixing charges L.S. 14.82 2.12 31.42
TOTAL 581.42 W X Y
Z
Add 1 % Water charges on "W" 5.81
TOTAL 587.23
Add GST on "X" (multiplying factor 0.1405) 82.51
TOTAL 669.74
Add 15% CPOH on "Y" 100.46
TOTAL 770.20
Add Cess @ 1% on "Z" 7.70
Cost of one no. 777.90
Say 777.90

18.19.3 40 mm nominal bore


18.19.3.1 Horizontal

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia
each 1.00 575.00 575.00
9988 Carriage of materials and fixing charges L.S. 16.12 2.12 34.17
WXY
TOTAL 609.17 Z
Add 1 % Water charges on "W" 6.09
TOTAL 615.27
Add GST on "X" (multiplying factor 0.1405) 86.44
TOTAL 701.71
Add 15% CPOH on "Y" 105.26
TOTAL 806.97
Add Cess @ 1% on "Z" 8.07
Cost of one no. 815.04
Say 815.05

18.19.3.2 Vertical

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3088 Gunmetal non-return valve-vertical (screwed end) 40 mm dia each 1.00 750.00 750.00
9988 Carriage of materials and fixing charges L.S. 16.12 2.12 34.17
TOTAL 784.17 W X Y
Add 1 % Water charges on "W" 7.84 Z
TOTAL 792.02
Add GST on "X" (multiplying factor 0.1405) 111.28
TOTAL 903.29
Add 15% CPOH on "Y" 135.49
TOTAL 1038.79
Add Cess @ 1% on "Z" 10.39
Cost of one no. 1049.18
Say 1049.20
18.19.4 50 mm nominal bore
18.19.4.1 Horizontal
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia
each 1.00 840.00 840.00
9988 Carriage of materials and fixing charges L.S. 17.55 2.12 37.21 W X Y
TOTAL 877.21 Z
Add 1 % Water charges on "W" 8.77
TOTAL 885.98
Add GST on "X" (multiplying factor 0.1405) 124.48
TOTAL 1010.46
Add 15% CPOH on "Y" 151.57
TOTAL 1162.03
Add Cess @ 1% on "Z" 11.62
Cost of one no. 1173.65
Say 1173.65

18.19.4.2 Vertical
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
3092 Gunmetal non-return valve-vertical (screwed end) 50 mm dia each 1.00 950.00 950.00
9988 Carriage of materials and fixing charges L.S. 17.55 2.12 37.21
TOTAL 987.21
WXYZ
Add 1 % Water charges on "W" 9.87
TOTAL 997.08
Add GST on "X" (multiplying factor 0.1405) 140.09
TOTAL 1137.17
Add 15% CPOH on "Y" 170.58
TOTAL 1307.74
Add Cess @ 1% on "Z" 13.08
Cost of one no. 1320.82
Say 1320.80

18.19.5 65 mm nominal bore


18.19.5.1 Horizontal

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia
each 1.00 1525.00 1525.00
9988 Carriage of materials and fixing charges L.S. 18.85 2.12 39.96
TOTAL 1564.96 W X Y Z
Add 1 % Water charges on "W" 15.65
TOTAL 1580.61
Add GST on "X" (multiplying factor 0.1405) 222.08
TOTAL 1802.69
Add 15% CPOH on "Y" 270.40
TOTAL 2073.09
Add Cess @ 1% on "Z" 20.73
Cost of one no. 2093.82
Say 2093.80
18.19.5.2 Vertical
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for one no.
MATERIAL
3096 Gunmetal non-return valve-vertical (screwed end) 65 mm dia each 1.00 1550.00 1550.00
9988 Carriage of materials and fixing charges L.S. 18.85 2.12 39.96
TOTAL 1589.96
Add 1 % Water charges on "W" 15.90
TOTAL 1605.86
Add GST on "X" (multiplying factor 0.1405) 225.62
TOTAL 1831.49
Add 15% CPOH on "Y" 274.72
TOTAL 2106.21
Add Cess @ 1% on "Z" 21.06
Cost of one no. 2127.27
Say 2127.25

18.19.6 80 mm nominal bore


18.19.6.1 Horizontal
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia
each 1.00 2300.00 2300.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 2342.99 W X Y Z
Add 1 % Water charges on "W" 23.43
TOTAL 2366.42
Add GST on "X" (multiplying factor 0.1405) 332.48
TOTAL 2698.91
Add 15% CPOH on "Y" 404.84
TOTAL 3103.74
Add Cess @ 1% on "Z" 31.04
Cost of one no. 3134.78
Say 3134.80

18.19.6.2 Vertical

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
3300 Gunmetal non-return valve-vertical (screwed end) 80 mm dia each 1.00 2600.00 2600.00
9988 Carriage of materials and fixing charges L.S. 20.28 2.12 42.99
TOTAL 2642.99 W X Y Z
Add 1 % Water charges on "W" 26.43
TOTAL 2669.42
Add GST on "X" (multiplying factor 0.1405) 375.05
TOTAL 3044.48
Add 15% CPOH on "Y" 456.67
TOTAL 3501.15
Add Cess @ 1% on "Z" 35.01
Cost of one no. 3536.16
Say 3536.15
18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
18.20.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1360 C.I.mouth, brass ferrule 15 mm dia each 1.00 140.00 140.00
9988 Carriage of materials and fixing charges L.S. 40.30 2.12 85.44
TOTAL 225.44 W X Y
Z
Add 1 % Water charges on "W" 2.25
TOTAL 227.69
Add GST on "X" (multiplying factor 0.1405) 31.99
TOTAL 259.68
Add 15% CPOH on "Y" 38.95
TOTAL 298.63
Add Cess @ 1% on "Z" 2.99
Cost of one no. 301.62
Say 301.60
18.20.2 20 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1361 C.I.mouth, brass ferrule 20 mm dia each 1.00 160.00 160.00
9988 Carriage of materials and fixing charges L.S. 47.19 2.12 100.04
TOTAL 260.04 W X Y
Z
Add 1 % Water charges on "W" 2.60
TOTAL 262.64
Add GST on "X" (multiplying factor 0.1405) 36.90
TOTAL 299.54
Add 15% CPOH on "Y" 44.93
TOTAL 344.48
Add Cess @ 1% on "Z" 3.44
Cost of one no. 347.92
Say 347.90

18.20.3 25 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.

WXY
Z
Details of cost for one no.
MATERIAL
1362 C.I.mouth, brass ferrule 25 mm dia each 1.00 220.00 220.00
9988 Carriage of materials and fixing charges L.S. 53.82 2.12 114.10
TOTAL 334.10 W X Y
Z
Add 1 % Water charges on "W" 3.34
TOTAL 337.44
Add GST on "X" (multiplying factor 0.1405) 47.41
TOTAL 384.85
Add 15% CPOH on "Y" 57.73
TOTAL 442.58
Add Cess @ 1% on "Z" 4.43
Cost of one no. 447.00
Say 447.00
18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :
18.21.1 30 cm length
18.21.1.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1687 Unplasticised P.V.C.connection pipe with brass union 30 cm
long 15 mm bore each 1.00 30.00 30.00
9988 Carriage of materials and fixing charges L.S. 12.22 2.12 25.91 W X Y
TOTAL 55.91 Z
Add 1 % Water charges on "W" 0.56
TOTAL 56.47
Add GST on "X" (multiplying factor 0.1405) 7.93
TOTAL 64.40
Add 15% CPOH on "Y" 9.66
TOTAL 74.06
Add Cess @ 1% on "Z" 0.74
Cost of one no. 74.80
Say 74.80

18.21.1.2 20 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1688 Unplasticised P.V.C.connection pipe with brass union 30 cm
long 20 mm bore each 1.00 35.00 35.00
9988 Carriage of materials and fixing charges L.S. 12.22 2.12 25.91 W X Y
TOTAL 60.91 Z
Add 1 % Water charges on "W" 0.61
TOTAL 61.52
Add GST on "X" (multiplying factor 0.1405) 8.64
TOTAL 70.16
Add 15% CPOH on "Y" 10.52
TOTAL 80.68
Add Cess @ 1% on "Z" 0.81
Cost of one no. 81.49
Say 81.50
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1689 Unplasticised P.V.C.connection pipe with brass union 45 cm
long 15 mm bore each 1.00 35.00 35.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66 W X Y
TOTAL 63.66 Z
Add 1 % Water charges on "W" 0.64
TOTAL 64.30
Add GST on "X" (multiplying factor 0.1405) 9.03
TOTAL 73.33
Add 15% CPOH on "Y" 11.00
TOTAL 84.33
Add Cess @ 1% on "Z" 0.84
Cost of one no. 85.18
Say 85.20

18.21.2.2 20 mm nominal bore


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1690 Unplasticised P.V.C.connection pipe with brass union 45 cm
long 20 mm bore each 1.00 48.00 48.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
WXYZ
TOTAL 76.66
Add 1 % Water charges on "W" 0.77
TOTAL 77.43
Add GST on "X" (multiplying factor 0.1405) 10.88
TOTAL 88.31
Add 15% CPOH on "Y" 13.25
TOTAL 101.55
Add Cess @ 1% on "Z" 1.02
Cost of one no. 102.57
Say 102.55

18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.1 100 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1878 Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia each 1.00 110.00 110.00
9988 Carriage of materials and fixing charges L.S. 6.76 2.12 14.33
TOTAL 124.33 W X Y Z
Add 1 % Water charges on "W" 1.24
TOTAL 125.57
Add GST on "X" (multiplying factor 0.1405) 17.64
TOTAL 143.22
Add 15% CPOH on "Y" 21.48
TOTAL 164.70
Add Cess @ 1% on "Z" 1.65
Cost of one no. 166.35
Say 166.35

18.22.2 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1879 Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia each 1.00 125.00 125.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 142.09 W X Y Z
Add 1 % Water charges on "W" 1.42
TOTAL 143.51
Add GST on "X" (multiplying factor 0.1405) 20.16
TOTAL 163.67
Add 15% CPOH on "Y" 24.55
TOTAL 188.22
Add Cess @ 1% on "Z" 1.88
Cost of one no. 190.10
Say 190.10
18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5.14 quintal
10 m of 200 mm dia C.I. pipe class 'A'
Weight = (2x257) = 514kg = 5.14 quintal
LABOUR for laying pipe
0116 Fitter (grade 1) day 0.17 784.00 133.28
0117 Assistant Fitter or 2nd class Fitter day 0.17 714.00 121.38
0114 Beldar day 1.33 645.00 857.85 W X Y Z
9999 Sundries L.S. 16.12 2.12 34.17
TOTAL 1146.68
Add 1 % Water charges on "W" 11.47
TOTAL 1158.15
Add GST on "X" (multiplying factor 0.1405) 162.72
TOTAL 1320.87
Add 15% CPOH on "Y" 198.13
TOTAL 1519.00
Add Cess @ 1% on "Z" 15.19
Cost of 5.14 quintal 1534.19
Cost of one quintal 298.48
Say 298.50
18.24 Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 7 quintal
10 Nos. Tee 200x150mm Weight = 70x10 = 700kg.
LABOUR for laying tee-
0116 Fitter (grade 1) day 0.93 784.00 729.12
0117 Assistant Fitter or 2nd class Fitter day 0.62 714.00 442.68
0114 Beldar day 2.48 645.00 1599.60
WXYZ
9999 Sundries L.S. 40.17 2.12 85.16
TOTAL 2856.56
Add 1 % Water charges on "W" 28.57
TOTAL 2885.13
Add GST on "X" (multiplying factor 0.1405) 405.36
TOTAL 3290.49
Add 15% CPOH on "Y" 493.57
TOTAL 3784.06
Add Cess @ 1% on "Z" 37.84
Cost of 7 quintal 3821.90
Cost of one quintal 545.99
Say 546.00
18.25 Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class):
18.25.1 Up to 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
1464 S & S.C.I.standard specials upto 300 mm dia (heavy class) quintal 1.00 3800.00 3800.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
LABOUR AW
18.24 Rate as per item No. 18.24 Of SH: Water Supply quintal 1.00 546.00 546.00 X
TOTAL 4360.57 Y Z
Add 1 % Water charges on "W-A" 38.15
TOTAL 4398.72
Add GST on "X-A" (multiplying factor 0.1405) 541.31
TOTAL 4940.02
Add 15% CPOH on "Y-A" 659.10
TOTAL 5599.13
Add Cess @ 1% on "Z-A" 50.53
Cost of one quintal 5649.66
Say 5649.65
18.25.2 Over 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
1466 S & S.C.I.standard specials over 300 mm dia (heavy class) quintal 1.00 3800.00 3800.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
LABOUR
For laying AW
18.24 Rate as per item No. 18.24 Of SH: Water Supply quintal 1.00 546.00 546.00 X Y
Z
TOTAL 4360.57
Add 1 % Water charges on "W-A" 38.15
TOTAL 4398.72
Add GST on "X-A" (multiplying factor 0.1405) 541.31
TOTAL 4940.02
Add 15% CPOH on "Y-A" 659.10
TOTAL 5599.13
Add Cess @ 1% on "Z-A" 50.53
Cost of one quintal 5649.66
Say 5649.65
18.26 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :
18.26.1 Up to 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
1468 Flanged C.I. standard specials upto 300 mm dia(heavy class)

AW
XYZ
quintal 1.00 5700.00 5700.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
LABOUR
For laying AW
XYZ
18.24 Rate as per item No. 18.24 of SH: Water Supply quintal 1.00 546.00 546.00
TOTAL 6260.57
Add 1 % Water charges on "W-A" 57.15
TOTAL 6317.72
Add GST on "X-A" (multiplying factor 0.1405) 810.93
TOTAL 7128.64
Add 15% CPOH on "Y-A" 987.40
TOTAL 8116.04
Add Cess @ 1% on "Z-A" 75.70
Cost of one quintal 8191.74
Say 8191.75

18.26.2 Over 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
1470 Flanged C.I. standard specials over 300 mm dia(heavy class)
quintal 1.00 5250.00 5250.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
LABOUR
For laying AW
XYZ
18.24 Rate as per item No. 18.24 of SH: Water Supply quintal 1.00 546.00 546.00
TOTAL 5810.57
Add 1 % Water charges on "W-A" 52.65
TOTAL 5863.22
Add GST on "X-A" (multiplying factor 0.1405) 747.07
TOTAL 6610.29
Add 15% CPOH on "Y-A" 909.64
TOTAL 7519.93
Add Cess @ 1% on "Z-A" 69.74
Cost of one quintal 7589.67
Say 7589.65
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :
18.27.1 100 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
100mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 19.820 Kg
Weight of 10m pipes 19.820x10 = 198.20 Kg
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia metre 10.00 857.00 8570.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.10 358.32 35.83 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 1.98 298.50 591.03
TOTAL 9196.86
Add 1 % Water charges on "W-A" 86.06
TOTAL 9282.92
Add GST on "X-A" (multiplying factor 0.1405) 1221.21
TOTAL 10504.13
Add 15% CPOH on "Y-A" 1486.97
TOTAL 11991.10
Add Cess @ 1% on "Z-A" 114.00
Cost of 10 metre 12105.10
Cost of one metre 1210.51
Say 1210.50

18.27.2 125 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
125mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 25.820 Kg
Weight of 10m pipes 25.820x10 = 258.20 Kg
7698 S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia metre 10.00 1067.00 10670.00
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre 0.10 478.64 47.86 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 2.58 298.50 770.13
TOTAL 11487.99
AW
XYZ

Add 1 % Water charges on "W-A" 107.18


TOTAL 11595.17
Add GST on "X-A" (multiplying factor 0.1405) 1520.92
TOTAL 13116.09
Add 15% CPOH on "Y-A" 1851.89
TOTAL 14967.99
Add Cess @ 1% on "Z-A" 141.98
Cost of 10 metre 15109.96
Cost of one metre 1511.00
Say 1511.00

18.27.3 150 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
150mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 32.180 Kg
Weight of 10m pipes 32.180x10 = 321.80 Kg
7699 S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia metre 10.00 1286.00 12860.00
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.10 597.20 59.72 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 3.22 298.50 961.17
TOTAL 13880.89
Add 1 % Water charges on "W-A" 129.20
TOTAL 14010.09
Add GST on "X-A" (multiplying factor 0.1405) 1833.37
TOTAL 15843.46
Add 15% CPOH on "Y-A" 2232.34
TOTAL 18075.80
Add Cess @ 1% on "Z-A" 171.15
Cost of 10 metre 18246.95
Cost of one metre 1824.69
Say 1824.70
18.27.4 200 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
200mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 47.090 Kg
Weight of 10m pipes 47.090x10 = 470.90 Kg
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia metre 10.00 2190.00 21900.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.10 971.45 97.15 A W
LABOUR for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 4.71 298.50 1405.94
TOTAL 23403.08
Add 1 % Water charges on "W-A" 219.97
TOTAL 23623.05
Add GST on "X-A" (multiplying factor 0.1405) 3121.50
TOTAL 26744.56
Add 15% CPOH on "Y-A" 3800.79
TOTAL 30545.35
Add Cess @ 1% on "Z-A" 291.39
Cost of 10 metre 30836.74
Cost of one metre 3083.67
Say 3083.65

18.27.5 250 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIALS
250mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 63.450 Kg
Weight of 10m pipes 63.450x10 = 634.50 Kg
7701 S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia metre 10.00 2857.00 28570.00
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 0.10 1380.48 138.05 A W
LABOUR for laying XY
Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 6.35 298.50 1895.48
TOTAL 30603.52
Add 1 % Water charges on "W-A" 287.08
TOTAL 30890.60
Add GST on "X-A" (multiplying factor 0.1405) 4073.82
TOTAL 34964.42
Z

Add 15% CPOH on "Y-A" 4960.34


TOTAL 39924.76
Add Cess @ 1% on "Z-A" 380.29
Cost of 10 metre 40305.05
Cost of one metre 4030.51
Say 4030.50

18.27.6 300 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
300mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 81.820 Kg
Weight of 10m pipes 81.820x10 = 818.20 Kg
7702 S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia metre 10.00 3857.00 38570.00
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 0.10 1706.30 170.63 A W
LABOUR for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 8.18 298.50 2441.73
TOTAL 41182.36
Add 1 % Water charges on "W-A" 387.41
TOTAL 41569.77
Add GST on "X-A" (multiplying factor 0.1405) 5497.49
TOTAL 47067.26
Add 15% CPOH on "Y-A" 6693.83
TOTAL 53761.08
Add Cess @ 1% on "Z-A" 513.19
Cost of 10 metre 54274.28
Cost of one metre 5427.43
Say 5427.45
18.27.7 350 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
350mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 103.10 Kg
Weight of 10m pipes 103.10x10 = 1031.00 Kg
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia metre 10.00 4619.00 46190.00
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 0.10 2388.82 238.88 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 10.31 298.50 3077.54
TOTAL 49506.42
Add 1 % Water charges on "W-A" 464.29
TOTAL 49970.71
Add GST on "X-A" (multiplying factor 0.1405) 6588.49
TOTAL 56559.20
Add 15% CPOH on "Y-A" 8022.25
TOTAL 64581.45
Add Cess @ 1% on "Z-A" 615.04
Cost of 10 metre 65196.48
Cost of one metre 6519.65
Say 6519.65

18.27.8 400 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
400mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 125.45 Kg
Weight of 10m pipes 125.45x10 = 1254.50 Kg
7704 S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia metre 10.00 6095.00 60950.00
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 0.10 3257.48 325.75 A W
LABOUR for laying XY
Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 12.55 298.50 3746.18
TOTAL 65021.92
Add 1 % Water charges on "W-A" 612.76
TOTAL 65634.68
Add GST on "X-A" (multiplying factor 0.1405) 8695.34
TOTAL 74330.02
Add 15% CPOH on "Y-A" 10587.58
TOTAL 84917.59
Add Cess @ 1% on "Z-A" 811.71
Cost of 10 metre 85729.31
Cost of one metre 8572.93
Say 8572.95

18.27.9 450 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
450mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 151.270 Kg
Weight of 10m pipes 151.270x10 = 1512.70 Kg
7705 S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia metre 10.00 7381.00 73810.00
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 0.10 3981.36 398.14 A W
LABOUR for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 15.13 298.50 4516.31
TOTAL 78724.44
Add 1 % Water charges on "W-A" 742.08
TOTAL 79466.52
Add GST on "X-A" (multiplying factor 0.1405) 10530.51
TOTAL 89997.03
Add 15% CPOH on "Y-A" 12822.11
TOTAL 102819.14
Add Cess @ 1% on "Z-A" 983.03
Cost for 10 metre 103802.16
Cost of one metre 10380.22
Say 10380.20
18.27.10 500 mm dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
500mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 177.090 Kg
Weight of 10m pipes 177.090x10 = 1770.90 Kg
7706 S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia metre 10.00 8571.00 85710.00
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 0.10 3981.36 398.14 A W
LABOUR for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 17.71 298.50 5286.44
TOTAL 91394.57
Add 1 % Water charges on "W-A" 861.08
TOTAL 92255.65
Add GST on "X-A" (multiplying factor 0.1405) 12219.18
TOTAL 104474.83
Add 15% CPOH on "Y-A" 14878.26
TOTAL 119353.09
Add Cess @ 1% on "Z-A" 1140.67
Cost of 10 metre 120493.75
Cost of one metre 12049.38
Say 12049.40

18.27.11 600 mm dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
600mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 236.000 Kg
Weight of 10m pipes 236.000x10 = 2360.00 Kg
7707 S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia metre 10.00 11995.00 119950.00
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.10 5972.04 597.20 A W
XY
LABOUR for laying
Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 23.60 298.50 7044.60
TOTAL 127591.80
Add 1 % Water charges on "W-A" 1205.47
TOTAL 128797.28
Add GST on "X-A" (multiplying factor 0.1405) 17106.25
TOTAL 145903.53
Add 15% CPOH on "Y-A" 20828.84
TOTAL 166732.37
Add Cess @ 1% on "Z-A" 1596.88
Cost of 10 metre 168329.24
Cost of 1 metre 16832.92
Say 16832.90
18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :
18.28.1 100 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 1.70 55.00 93.50
0.17x 10 =1.70 kg
0761 Fuel wood quintal 0.28 500.00 140.00
0771 Kerosene oil litre 0.38 50.00 19.00
9999 Sundries L.S. 6.76 2.12 14.33
9977 Carriage of materials L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 1.00 784.00 784.00
0117 Assistant Fitter or 2nd class Fitter day 1.00 714.00 714.00
0114 Beldar day 2.00 645.00 1290.00
TOTAL 3066.13
Add 1 % Water charges on "W" 30.66
TOTAL 3096.79
Add GST on "X" (multiplying factor 0.1405) 435.10
TOTAL 3531.89
Add 15% CPOH on "Y" 529.78
TOTAL 4061.68 W X Y Z
Add Cess @ 1% on "Z" 40.62
Cost of 10 joints 4102.29
Cost of one joint 410.23
Say 410.25
18.28.2 125 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 2.00 55.00 110.00
0.20x10=2.00 kg
0761 Fuel wood quintal 0.37 500.00 185.00
0771 Kerosene oil litre 0.76 50.00 38.00
9999 Sundries L.S. 9.49 2.12 20.12
9977 Carriage of materials L.S. 9.49 2.12 20.12
LABOUR
0116 Fitter (grade 1) day 1.50 784.00 1176.00
0117 Assistant Fitter or 2nd class Fitter day 1.50 714.00 1071.00
0114 Beldar day 3.00 645.00 1935.00
TOTAL 4555.24
Add 1 % Water charges on "W" 45.55
TOTAL 4600.79
Add GST on "X" (multiplying factor 0.1405) 646.41
TOTAL 5247.20
Add 15% CPOH on "Y" 787.08
TOTAL 6034.28 W X Y Z
Add Cess @ 1% on "Z" 60.34
Cost of 10 joints 6094.62
Cost of one joint 609.46
Say 609.45
18.28.3 150 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 2.30 55.00 126.50
0.23x10=2.30 kg
0761 Fuel wood quintal 0.42 500.00 210.00
0771 Kerosene oil litre 0.76 50.00 38.00
9999 Sundries L.S. 10.79 2.12 22.87
9977 Carriage of materials L.S. 10.79 2.12 22.87
LABOUR
0116 Fitter (grade 1) day 1.50 784.00 1176.00
0117 Assistant Fitter or 2nd class Fitter day 1.50 714.00 1071.00
0114 Beldar day 3.00 645.00 1935.00
TOTAL 4602.25
Add 1 % Water charges on "W" 46.02
TOTAL 4648.27
Add GST on "X" (multiplying factor 0.1405) 653.08
TOTAL 5301.35
Add 15% CPOH on "Y" 795.20 W X Y
Z
WXY
TOTAL 6096.56 Z
Add Cess @ 1% on "Z" 60.97
Cost of 10 joints 6157.52
Cost of one joint 615.75
Say 615.75
18.28.4 200 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 3.00 55.00 165.00
0.3x10=3.00 kg
0761 Fuel wood quintal 0.56 500.00 280.00
0771 Kerosene oil litre 0.76 50.00 38.00
9999 Sundries L.S. 13.52 2.12 28.66
9977 Carriage of materials L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 2.00 784.00 1568.00
0117 Assistant Fitter or 2nd class Fitter day 2.00 714.00 1428.00
0114 Beldar day 4.00 645.00 2580.00
TOTAL 6116.32
Add 1 % Water charges on "W" 61.16
TOTAL 6177.49
Add GST on "X" (multiplying factor 0.1405) 867.94
TOTAL 7045.43
Add 15% CPOH on "Y" 1056.81
TOTAL 8102.24 W X Y Z
Add Cess @ 1% on "Z" 81.02
Cost of 10 joints 8183.26
Cost of one joint 818.33
Say 818.35
18.28.5 250 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 4.00 55.00 220.00
0.4x10=4 00 kg
0761 Fuel wood quintal 0.65 500.00 325.00
0771 Kerosene oil litre 1.14 50.00 57.00
9999 Sundries L.S. 17.55 2.12 37.21
9977 Carriage of materials L.S. 17.55 2.12 37.21
LABOUR
0116 Fitter (grade 1) day 2.50 784.00 1960.00
0117 Assistant Fitter or 2nd class Fitter day 2.50 714.00 1785.00
0114 Beldar day 5.00 645.00 3225.00
TOTAL 7646.41
Add 1 % Water charges on "W" 76.46
TOTAL 7722.88
Add GST on "X" (multiplying factor 0.1405) 1085.06
TOTAL 8807.94
Add 15% CPOH on "Y" 1321.19
TOTAL 10129.13 W X Y Z
Add Cess @ 1% on "Z" 101.29
Cost of 10 joints 10230.42
Cost of one joint 1023.04
Say 1023.05

18.28.6 300 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 5.40 55.00 297.00
0.54x10 =5.40 kg
0761 Fuel wood quintal 0.75 500.00 375.00
0771 Kerosene oil litre 1.52 50.00 76.00
9999 Sundries L.S. 20.28 2.12 42.99
9977 Carriage of materials L.S. 20.28 2.12 42.99
LABOUR
0116 Fitter (grade 1) day 3.00 784.00 2352.00
0117 Assistant Fitter or 2nd class Fitter day 3.00 714.00 2142.00
0114 Beldar day 6.00 645.00 3870.00
TOTAL 9197.99
Add 1 % Water charges on "W" 91.98
TOTAL 9289.97
Add GST on "X" (multiplying factor 0.1405) 1305.24

WXY
Z
TOTAL 10595.21
Add 15% CPOH on "Y" 1589.28 W X Y
TOTAL 12184.49 Z
Add Cess @ 1% on "Z" 121.84
Cost of 10 joints 12306.33
Cost of one joint 1230.63
Say 1230.65

18.28.7 350 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 6.20 55.00 341.00
0.62x10=6.20 kg
0761 Fuel wood quintal 0.93 500.00 465.00
0771 Kerosene oil litre 1.70 50.00 85.00
9999 Sundries L.S. 24.18 2.12 51.26
9977 Carriage of materials L.S. 24.18 2.12 51.26
LABOUR
0116 Fitter (grade 1) day 3.00 784.00 2352.00
0117 Assistant Fitter or 2nd class Fitter day 3.00 714.00 2142.00
0114 Beldar day 6.00 645.00 3870.00
TOTAL 9357.52
Add 1 % Water charges on "W" 93.58
TOTAL 9451.10
Add GST on "X" (multiplying factor 0.1405) 1327.88
TOTAL 10778.98
Add 15% CPOH on "Y" 1616.85
TOTAL 12395.82 W X Y Z
Add Cess @ 1% on "Z" 123.96
Cost of 10 joints 12519.78
Cost of one joint 1251.98
Say 1252.00
18.28.8 400 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 7.40 55.00 407.00
0761 Fuel wood quintal 1.12 500.00 560.00
0.74x10=7.40 kg
0771 Kerosene oil litre 1.70 50.00 85.00
9999 Sundries L.S. 26.91 2.12 57.05
9977 Carriage of materials L.S. 26.91 2.12 57.05
LABOUR
0116 Fitter (grade 1) day 4.00 784.00 3136.00
0117 Assistant Fitter or 2nd class Fitter day 4.00 714.00 2856.00
0114 Beldar day 8.00 645.00 5160.00
TOTAL 12318.10
Add 1 % Water charges on "W" 123.18
TOTAL 12441.28
Add GST on "X" (multiplying factor 0.1405) 1748.00
TOTAL 14189.28
Add 15% CPOH on "Y" 2128.39
TOTAL 16317.67 W X Y Z
Add Cess @ 1% on "Z" 163.18
Cost of 10 joints 16480.85
Cost of one joint 1648.08
Say 1648.10
18.28.9 450 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 7.90 55.00 434.50
0.79x10=7.90 kg
0761 Fuel wood quintal 1.21 500.00 605.00
0771 Kerosene oil litre 2.27 50.00 113.50
9999 Sundries L.S. 31.07 2.12 65.87
9977 Carriage of materials L.S. 31.07 2.12 65.87
LABOUR
0116 Fitter (grade 1) day 4.50 784.00 3528.00
0117 Assistant Fitter or 2nd class Fitter day 4.50 714.00 3213.00
0114 Beldar day 9.00 645.00 5805.00
TOTAL 13830.74
Add 1 % Water charges on "W" 138.31

WXY
Z
TOTAL 13969.04
Add GST on "X" (multiplying factor 0.1405) 1962.65
TOTAL 15931.69
Add 15% CPOH on "Y" 2389.75 W X Y
TOTAL 18321.45 Z
Add Cess @ 1% on "Z" 183.21
Cost of 10 joints 18504.66
Cost of one joint 1850.47
Say 1850.45
18.28.10 500 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 8.50 55.00 467.50
0.85x10=8.50 kg
0761 Fuel wood quintal 1.31 500.00 655.00
0771 Kerosene oil litre 2.27 50.00 113.50
9999 Sundries L.S. 33.67 2.12 71.38
9977 Carriage of materials L.S. 33.67 2.12 71.38
LABOUR
0116 Fitter (grade 1) day 4.75 784.00 3724.00
0117 Assistant Fitter or 2nd class Fitter day 4.75 714.00 3391.50
0114 Beldar day 9.50 645.00 6127.50
TOTAL 14621.76
Add 1 % Water charges on "W" 146.22
TOTAL 14767.98
Add GST on "X" (multiplying factor 0.1405) 2074.90
TOTAL 16842.88
Add 15% CPOH on "Y" 2526.43
TOTAL 19369.31 W X Y Z
Add Cess @ 1% on "Z" 193.69
Cost of 10 joints 19563.00
Cost of one joint 1956.30
Say 1956.30
18.28.11 600 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1881 Spun yarn kilogram 10.20 55.00 561.00
1.02x10=10.20 kg
0761 Fuel wood quintal 1.68 500.00 840.00
0771 Kerosene oil litre 2.84 50.00 142.00
9999 Sundries L.S. 40.30 2.12 85.44
9977 Carriage of materials L.S. 40.30 2.12 85.44
LABOUR
0116 Fitter (grade 1) day 6.50 784.00 5096.00
0117 Assistant Fitter or 2nd class Fitter day 6.50 714.00 4641.00
0114 Beldar day 13.00 645.00 8385.00
TOTAL 19835.87
Add 1 % Water charges on "W" 198.36
TOTAL 20034.23
Add GST on "X" (multiplying factor 0.1405) 2814.81
TOTAL 22849.04
Add 15% CPOH on "Y" 3427.36
TOTAL 26276.40 W X Y Z
Add Cess @ 1% on "Z" 262.76
Cost of 10 joints 26539.16
Cost of one joint 2653.92
Say 2653.90

18.29 Supplying pig lead at site of work.

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 quintal
MATERIAL
1397 Pig lead kilogram 100.00 210.00 21000.00
2341 Carriage of Pig lead tonne 0.10 145.72 14.57
TOTAL 21014.57
Add 1 % Water charges on "W" 210.15
TOTAL 21224.72
Add GST on "X" (multiplying factor 0.1405) 2982.07
TOTAL 24206.79
Add 15% CPOH on "Y" 3631.02
TOTAL 27837.81
Add Cess @ 1% on "Z" 278.38
Cost of one quintal 28116.19
Say 28116.20

18.30 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints :
18.30.1 80 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1373 Rubber insertions for 80 mm dia pipe joints each 10.00 16.00 160.00
1956 Bolts and nuts 16 mm dia 60 mm long each 40.00 11.50 460.00
9977 Carriage of materials L.S. 2.73 2.12 5.79
LABOUR
0116 Fitter (grade 1) day 0.15 784.00 117.60
0117 Assistant Fitter or 2nd class Fitter day 0.15 714.00 107.10
0114 Beldar day 0.80 645.00 516.00
TOTAL 1366.49
Add 1 % Water charges on "W" 13.66
TOTAL 1380.15
Add GST on "X" (multiplying factor 0.1405) 193.91
TOTAL 1574.06
Add 15% CPOH on "Y" 236.11 W X Y
TOTAL 1810.17 Z
Add Cess @ 1% on "Z" 18.10
Cost for 10 joints 1828.28
Cost for one joint 182.83
Say 182.85
18.30.2 100 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1374 Rubber insertions for 100 mm dia pipe joints each 10.00 18.00 180.00
1956 Bolts and nuts 16 mm dia 60 mm long each 80.00 11.50 920.00
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0117 Assistant Fitter or 2nd class Fitter day 0.25 714.00 178.50 W X Y Z
0114 Beldar day 1.00 645.00 645.00
TOTAL 2128.32
Add 1 % Water charges on "W" 21.28
TOTAL 2149.60
Add GST on "X" (multiplying factor 0.1405) 302.02
TOTAL 2451.62
Add 15% CPOH on "Y" 367.74
TOTAL 2819.36
Add Cess @ 1% on "Z" 28.19
Cost for 10 joints 2847.56
Cost for one joint 284.76
Say 284.75

18.30.3 125 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1375 Rubber insertions for 125 mm dia pipe joints each 10.00 20.00 200.00
1957 Bolts and nuts 16 mm dia 65 mm long each 80.00 13.00 1040.00
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0117 Assistant Fitter or 2nd class Fitter day 0.25 714.00 178.50 W X Y Z
0114 Beldar day 1.00 645.00 645.00
TOTAL 2268.32
Add 1 % Water charges on "W" 22.68
TOTAL 2291.00
Add GST on "X" (multiplying factor 0.1405) 321.89
TOTAL 2612.89
Add 15% CPOH on "Y" 391.93
TOTAL 3004.82
Add Cess @ 1% on "Z" 30.05
Cost for 10 joints 3034.87
Cost for one joint 303.49
Say 303.50

18.30.4 150 mm diameter pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1376 Rubber insertions for 150 mm dia pipe joints each 10.00 20.00 200.00
1958 Bolts and nuts 20 mm dia 65 mm long each 80.00 15.00 1200.00
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0117 Assistant Fitter or 2nd class Fitter day 0.30 714.00 214.20 W X Y Z
0114 Beldar day 1.10 645.00 709.50
TOTAL 2567.72
Add 1 % Water charges on "W" 25.68
TOTAL 2593.40
Add GST on "X" (multiplying factor 0.1405) 364.37
TOTAL 2957.77
Add 15% CPOH on "Y" 443.67
TOTAL 3401.43
Add Cess @ 1% on "Z" 34.01
Cost for 10 joints 3435.45
Cost for one joint 343.54
Say 343.55
18.30.5 200 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1377 Rubber insertions for 200 mm dia pipe joints each 10.00 25.00 250.00
1959 Bolts and nuts 20 mm dia 70 mm long each 80.00 17.50 1400.00
9977 Carriage of materials L.S. 4.16 2.12 8.82
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0117 Assistant Fitter or 2nd class Fitter day 0.30 714.00 214.20 W X Y Z
0114 Beldar day 1.10 645.00 709.50
TOTAL 2817.72
Add 1 % Water charges on "W" 28.18
TOTAL 2845.90
Add GST on "X" (multiplying factor 0.1405) 399.85
TOTAL 3245.74
Add 15% CPOH on "Y" 486.86
TOTAL 3732.61
Add Cess @ 1% on "Z" 37.33
Cost for 10 joints 3769.93
Cost for one joint 376.99
Say 377.00

18.30.6 250 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1378 Rubber insertions for 250 mm dia pipe joints each 10.00 40.00 400.00
1960 Bolts and nuts 20 mm dia 75 mm long each 120.00 17.00 2040.00
9977 Carriage of materials L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.40 784.00 313.60
0117 Assistant Fitter or 2nd class Fitter day 0.40 714.00 285.60
0114 Beldar day 1.30 645.00 838.50
TOTAL 3889.00
Add 1 % Water charges on "W" 38.89
TOTAL 3927.89
Add GST on "X" (multiplying factor 0.1405) 551.87
TOTAL 4479.76
Add 15% CPOH on "Y" 671.96 W X Y
TOTAL 5151.72 Z
Add Cess @ 1% on "Z" 51.52
Cost for 10 joints 5203.24
Cost for one joint 520.32
Say 520.30

18.30.7 300 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1379 Rubber insertions for 300 mm dia pipe joints each 10.00 45.00 450.00
1960 Bolts and nuts 20 mm dia 75 mm long each 120.00 17.00 2040.00
9977 Carriage of materials L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.40 784.00 313.60
0117 Assistant Fitter or 2nd class Fitter day 0.40 714.00 285.60
0114 Beldar day 1.30 645.00 838.50
TOTAL 3939.00
Add 1 % Water charges on "W" 39.39
TOTAL 3978.39
Add GST on "X" (multiplying factor 0.1405) 558.96
TOTAL 4537.35
Add 15% CPOH on "Y" 680.60 W X Y
TOTAL 5217.96 Z
Add Cess @ 1% on "Z" 52.18
Cost for 10 joints 5270.14
Cost for one joint 527.01
Say 527.00
18.30.8 350 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1380 Rubber insertions for 350 mm dia pipe joints each 10.00 50.00 500.00
1961 Bolts and nuts 20 mm dia 80 mm long each 160.00 17.00 2720.00
9977 Carriage of materials L.S. 5.33 2.12 11.30
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0117 Assistant Fitter or 2nd class Fitter day 0.50 714.00 357.00 W X Y Z
0114 Beldar day 1.50 645.00 967.50
TOTAL 4947.80
Add 1 % Water charges on "W" 49.48
TOTAL 4997.28
Add GST on "X" (multiplying factor 0.1405) 702.12
TOTAL 5699.40
Add 15% CPOH on "Y" 854.91
TOTAL 6554.30
Add Cess @ 1% on "Z" 65.54
Cost for 10 joints 6619.85
Cost for one joint 661.98
Say 662.00

18.30.9 400 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1381 Rubber insertions for 400 mm dia pipe joints each 10.00 73.00 730.00
1962 Bolts and nuts 24 mm dia 85 mm long each 160.00 27.00 4320.00
9977 Carriage of materials L.S. 8.06 2.12 17.09
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0117 Assistant Fitter or 2nd class Fitter day 0.50 714.00 357.00 W X Y Z
0114 Beldar day 1.50 645.00 967.50
TOTAL 6783.59
Add 1 % Water charges on "W" 67.84
TOTAL 6851.42
Add GST on "X" (multiplying factor 0.1405) 962.62
TOTAL 7814.05
Add 15% CPOH on "Y" 1172.11
TOTAL 8986.16
Add Cess @ 1% on "Z" 89.86
Cost for 10 joints 9076.02
Cost for one joint 907.60
Say 907.60

18.30.10 450 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1382 Rubber insertions for 450 mm dia pipe joints each 10.00 92.00 920.00
1962 Bolts and nuts 24 mm dia 85 mm long each 200.00 27.00 5400.00
9977 Carriage of materials L.S. 8.06 2.12 17.09
LABOUR
0116 Fitter (grade 1) day 0.60 784.00 470.40
0117 Assistant Fitter or 2nd class Fitter day 0.60 714.00 428.40 W X Y Z
0114 Beldar day 1.70 645.00 1096.50
TOTAL 8332.39
Add 1 % Water charges on "W" 83.32
WXYZ

TOTAL 8415.71
Add GST on "X" (multiplying factor 0.1405) 1182.41
TOTAL 9598.12
Add 15% CPOH on "Y" 1439.72
TOTAL 11037.84
Add Cess @ 1% on "Z" 110.38
Cost for 10 joints 11148.21
Cost for one joint 1114.82
Say 1114.80
18.30.11 500 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 joints
MATERIAL
1383 Rubber insertions for 500 mm dia pipe joints each 10.00 110.00 1100.00
1963 Bolts and nuts 24 mm dia 90 mm long each 200.00 31.00 6200.00
9977 Carriage of materials L.S. 8.06 2.12 17.09
LABOUR
0116 Fitter (grade 1) day 0.65 784.00 509.60
0117 Assistant Fitter or 2nd class Fitter day 0.65 714.00 464.10
0114 Beldar day 1.80 645.00 1161.00
TOTAL 9451.79
Add 1 % Water charges on "W" 94.52
TOTAL 9546.31
Add GST on "X" (multiplying factor 0.1405) 1341.26
TOTAL 10887.56
Add 15% CPOH on "Y" 1633.13 W X Y
TOTAL 12520.70 Z
Add Cess @ 1% on "Z" 125.21
Cost of 10 joints 12645.90
Cost for one joint 1264.59
Say 1264.60

18.30.12 600 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 joints
MATERIAL
1384 Rubber insertions for 600 mm dia pipe joints each 10.00 125.00 1250.00
1964 Bolts and nuts 27 mm dia 100 mm long each 200.00 37.00 7400.00
9977 Carriage of materials L.S. 9.49 2.12 20.12
LABOUR
0116 Fitter (grade 1) day 0.75 784.00 588.00
0117 Assistant Fitter or 2nd class Fitter day 0.75 714.00 535.50
0114 Beldar day 2.00 645.00 1290.00
TOTAL 11083.62
Add 1 % Water charges on "W" 110.84
TOTAL 11194.45
Add GST on "X" (multiplying factor 0.1405) 1572.82
TOTAL 12767.28
Add 15% CPOH on "Y" 1915.09 W X Y
TOTAL 14682.37 Z
Add Cess @ 1% on "Z" 146.82
Cost for 10 joints 14829.19
Cost for one joint 1482.92
Say 1482.90
18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separate
18.31.1 100 mm diameter
18.31.1.1 Class I

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
1940 C.I.sluice valve (with caps) class I : 100 mm dia each 10.00 2450.00 24500.00
Carriage of sluice valves
wt.= 44.3x10=443kg= 0.443t. say 0.44t
2309 Carriage of Cast iron fittings tonne 0.44 145.72 64.12
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 4.43 546.00 2418.78 A
Providing flanged joints to sluice valves with bolts, nuts and AW
XYZ
rubber insertion etc.
18.30.2 (Rate as per item No.18.30.2 Of SH: Water Supply) each 20.00 284.75 5695.00
TOTAL 32677.90
Add 1 % Water charges on "W-A" 245.64
A
AW
XYZ

TOTAL 32923.54
Add GST on "X-A" (multiplying factor 0.1405) 3485.77
TOTAL 36409.31
Add 15% CPOH on "Y-A" 4244.33
TOTAL 40653.64
Add Cess @ 1% on "Z-A" 325.40
Cost of 10 valves 40979.04
Cost of 1 valve 4097.90
Say 4097.90
18.31.1.2 Class II
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sluice valves
MATERIAL
3311 C.I.sluice valve (with caps) class II : 100 mm dia each 10.00 2700.00 27000.00
Carriage of sluice valves
56.3x10=563kg= 0.563t=0.56t
2309 Carriage of Cast iron fittings tonne 0.56 145.72 81.60
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 5.63 546.00 3073.98 A
AW
Providing flanged joints to sluice valves with bolts, nuts and X
rubber insertion etc. YZ
18.30.2 (Rate as per item No.18.30.2 Of SH: Water Supply) each 20.00 284.75 5695.00
TOTAL 35850.58
Add 1 % Water charges on "W-A" 270.82
TOTAL 36121.40
Add GST on "X-A" (multiplying factor 0.1405) 3843.01
TOTAL 39964.41
Add 15% CPOH on "Y-A" 4679.32
TOTAL 44643.73
Add Cess @ 1% on "Z-A" 358.75
Cost of 10 valves 45002.48
Cost of 1 valve 4500.25
Say 4500.25

18.31.2 125 mm diameter


18.31.2.1 Class I

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
1941 C.I.sluice valve (with caps) class I : 125 mm dia each 10.00 2610.00 26100.00
Carriage of sluice valves
wt. = 56.3x10=563kg = 0.563t. say 0.56t
2309 Carriage of Cast iron fittings tonne 0.56 145.72 81.60
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 5.63 546.00 3073.98 A
Providing flanged joints to sluice valves with bolts, nuts and AW
rubber insertion etc. XYZ
18.30.3 (Rate as per item No.18.30.3 Of SH: Water Supply) each 20.00 303.50 6070.00
TOTAL 35325.58
Add 1 % Water charges on "W-A" 261.82
TOTAL 35587.40
Add GST on "X-A" (multiplying factor 0.1405) 3715.30
TOTAL 39302.70
Add 15% CPOH on "Y-A" 4523.81
TOTAL 43826.51
Add Cess @ 1% on "Z-A" 346.83
Cost of 10 valves 44173.33
Cost of 1 valve 4417.33
Say 4417.35

18.31.2.2 Class II

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
3314 C.I.sluice valve (with caps) class II : 125 mm dia each 10.00 3300.00 33000.00
Carriage of sluice valves
wt. = 68.3x10=683kg = 0.68t say 0.68t
2309 Carriage of Cast iron fittings tonne 0.68 145.72 99.09
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 6.83 546.00 3729.18 A
Providing flanged joints to sluice valves with bolts, nuts and AW
XYZ
rubber insertion etc.
18.30.3 (Rate as per item No.18.30.3 Of SH: Water Supply) each 20.00 303.50 6070.00
TOTAL 42898.27
A
AW
XYZ

Add 1 % Water charges on "W-A" 330.99


TOTAL 43229.26
Add GST on "X-A" (multiplying factor 0.1405) 4696.93
TOTAL 47926.19
Add 15% CPOH on "Y-A" 5719.05
TOTAL 53645.24
Add Cess @ 1% on "Z-A" 438.46
Cost of 10 valves 54083.70
Cost of 1 valve 5408.37
Say 5408.35
18.31.3 150 mm diameter
18.31.3.1 Class I
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sluice valves
MATERIAL
1942 C.I.sluice valve (with caps) class I : 150 mm dia each 10.00 3650.00 36500.00
Carriage of sluice valves
wt. = 72.5x10=725kg = 0.725t. say 0.72t
2309 Carriage of Cast iron fittings tonne 0.72 145.72 104.92
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 7.25 546.00 3958.50 A
AW
Providing flanged joints to sluice valves with bolts, nuts and X
rubber insertion etc. YZ
18.30.4 (Rate as per item No.18.30.4 Of SH: Water Supply) each 20.00 343.55 6871.00
TOTAL 47434.42
Add 1 % Water charges on "W-A" 366.05
TOTAL 47800.47
Add GST on "X-A" (multiplying factor 0.1405) 5194.42
TOTAL 52994.89
Add 15% CPOH on "Y-A" 6324.81
TOTAL 59319.70
Add Cess @ 1% on "Z-A" 484.90
Cost of 10 valves 59804.60
Cost of 1 valve 5980.46
Say 5980.45
18.31.3.2 Class II
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sluice valves
MATERIAL
3317 C.I.sluice valve (with caps) class II : 150 mm dia each 10.00 4100.00 41000.00
Carriage of sluice valves
wt. = 86.5x10=865kg = 0.865t. say 0.865t
2309 Carriage of Cast iron fittings tonne 0.865 145.72 126.05
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 8.65 546.00 4722.90 A
Providing flanged joints to sluice valves with bolts, nuts and AW
rubber insertion etc. XYZ
18.30.4 (Rate as per item No.18.30.4 Of SH: Water Supply) each 20.00 343.55 6871.00
TOTAL 52719.95
Add 1 % Water charges on "W-A" 411.26
TOTAL 53131.21
Add GST on "X-A" (multiplying factor 0.1405) 5835.99
TOTAL 58967.20
Add 15% CPOH on "Y-A" 7106.00
TOTAL 66073.20
Add Cess @ 1% on "Z-A" 544.79
Cost of 10 valves 66617.99
Cost of 1 valve 6661.80
Say 6661.80
18.31.4 200 mm diameter
18.31.4.1 Class I

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
1943 C.I.sluice valve (with caps) class I : 200 mm dia each 10.00 7600.00 76000.00
Carriage of sluice valves
wt. = 121.5x10=1215kg = 1.215t. say 1.22t
2309 Carriage of Cast iron fittings tonne 1.22 145.72 177.78
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 12.15 546.00 6633.90 A
Providing flanged joints to sluice valves with bolts, nuts and AW
rubber insertion etc. XYZ
18.30.5 (Rate as per item No.18.30.5 Of SH: Water Supply) each 20.00 377.00 7540.00
TOTAL 90351.68
A
AW
XYZ

Add 1 % Water charges on "W-A" 761.78


TOTAL 91113.46
Add GST on "X-A" (multiplying factor 0.1405) 10810.01
TOTAL 101923.46
Add 15% CPOH on "Y-A" 13162.43
TOTAL 115085.90
Add Cess @ 1% on "Z-A" 1009.12
Cost of 10 valves 116095.02
Cost of 1 valve 11609.50
Say 11609.50
18.31.4.2 Class II
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sluice valves
MATERIAL
3320 C.I.sluice valve (with caps) class II : 200 mm dia each 10.00 8900.00 89000.00
Carriage of sluice valves
wt. = 150.5x10=1505 kg = 1.5 t. say 1.5 t
2309 Carriage of Cast iron fittings tonne 1.50 145.72 218.58
LABOUR for laying sluice valve A
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 15.05 546.00 8217.30 A W
Providing flanged joints to sluice valves with bolts, nuts and XY
rubber insertion etc. Z
18.30.5 (Rate as per item No.18.30.5 Of SH: Water Supply) each 20.00 377.00 7540.00
TOTAL 104975.88
Add 1 % Water charges on "W-A" 892.19
TOTAL 105868.07
Add GST on "X-A" (multiplying factor 0.1405) 12660.56
TOTAL 118528.63
Add 15% CPOH on "Y-A" 15415.70
TOTAL 133944.33
Add Cess @ 1% on "Z-A" 1181.87
Cost of 10 valves 135126.20
Cost of 1 valve 13512.62
Say 13512.60

18.31.5 250 mm diameter


18.31.5.1 Class I

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
1944 C.I.sluice valve (with caps) class I : 250 mm dia each 10.00 10980.00 109800.00
Carriage of sluice valves
wt. = 179.9x10=1799kg = 1.799t. say 1.80t
2309 Carriage of Cast iron fittings tonne 1.80 145.72 262.30
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 17.99 546.00 9822.54 A
Providing flanged joints to sluice valves with bolts, nuts and AW
XYZ
rubber insertion etc.
18.30.6 (Rate as per item No.18.30.6 Of SH: Water Supply) each 20.00 520.30 10406.00
TOTAL 130290.84
Add 1 % Water charges on "W-A" 1100.62
TOTAL 131391.46
Add GST on "X-A" (multiplying factor 0.1405) 15618.39
TOTAL 147009.85
Add 15% CPOH on "Y-A" 19017.20
TOTAL 166027.05
Add Cess @ 1% on "Z-A" 1457.99
Cost of 10 valves 167485.03
Cost of 1 valve 16748.50
Say 16748.50

18.31.5.2 Class II

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
3321 C.I.sluice valve (with caps) class II : 250 mm dia each 10.00 15000.00 150000.00
Carriage of sluice valves
wt. = 229.9x10=2299kg = 2299t. say 2.30t
2309 Carriage of Cast iron fittings tonne 2.30 145.72 335.16
LABOUR for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 22.99 546.00 12552.54 A
Providing flanged joints to sluice valves with bolts, nuts and AW
XYZ
A
AW
XYZ
rubber insertion etc.
18.30.6 (Rate as per item No.18.30.6 Of SH: Water Supply) each 20.00 520.30 10406.00
TOTAL 173293.70
Add 1 % Water charges on "W-A" 1503.35
TOTAL 174797.05
Add GST on "X-A" (multiplying factor 0.1405) 21333.31
TOTAL 196130.36
Add 15% CPOH on "Y-A" 25975.77
TOTAL 222106.13
Add Cess @ 1% on "Z-A" 1991.48
Cost of 10 valves 224097.61
Cost of 1 valve 22409.76
Say 22409.75
18.31.6 300 mm diameter
18.31.6.1 Class I

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
1945 C.I.sluice valve (with caps) class I : 300 mm dia each 10.00 15500.00 155000.00
Carriage of sluice valves
wt. = 242.4x10=2424kg = 2.424t. say 2.42t
2309 Carriage of Cast iron fittings tonne 2.42 145.72 352.64
LABOUR for laying sluice valve A
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 24.24 546.00 13235.04 A W
Providing flanged joints to sluice valves with bolts, nuts and XY
rubber insertion etc. Z
18.30.7 (Rate as per item No.18.30.7 Of SH: Water Supply) each 20.00 527.00 10540.00
TOTAL 179127.68
Add 1 % Water charges on "W-A" 1553.53
TOTAL 180681.21
Add GST on "X-A" (multiplying factor 0.1405) 22045.32
TOTAL 202726.53
Add 15% CPOH on "Y-A" 26842.72
TOTAL 229569.25
Add Cess @ 1% on "Z-A" 2057.94
Cost of 10 valves 231627.19
Cost of 1 valve 23162.72
Say 23162.70

18.31.6.2 Class II

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sluice valves
MATERIAL
3326 C.I.sluice valve (with caps) class II : 300 mm dia each 10.00 18500.00 185000.00
Carriage of sluice valves
wt. = 303.4x10=3034kg = 3.304t. Say 3.03 tonne.
2309 Carriage of Cast iron fittings tonne 3.03 145.72 441.53
LABOUR for laying sluice valve A
18.24 (Rate as per item No. 18.24 Of SH: Water Supply) quintal 30.34 546.00 16565.64 A W
Providing flanged joints to sluice valves with bolts, nuts and X
rubber insertion etc. YZ
18.30.7 (Rate as per item No.18.30.7 Of SH: Water Supply) each 20.00 527.00 10540.00
TOTAL 212547.17
Add 1 % Water charges on "W-A" 1854.42
TOTAL 214401.59
Add GST on "X-A" (multiplying factor 0.1405) 26315.08
TOTAL 240716.67
Add 15% CPOH on "Y-A" 32041.65
TOTAL 272758.32
Add Cess @ 1% on "Z-A" 2456.53
Cost of 10 valves 275214.85
Cost of 1 valve 27521.48
Say 27521.50
18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surfac
100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size
necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cemen
mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including refilling and disposal of
surplus earth
0.68x0.68x0.65m=0.301cum.
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 0.30 286.85 86.055 A A
2.25 Rate as per item No.2.25 cum 0.30 253.95 76.19 A
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded A
A
stone aggregate 40mm nominal size)
A
0.68x0.68x0.075m=0.035cum. Say 0.04 cum. WXY
4.1.11 Rate as per item no 4.1.11 of SH : Concrete work cum 0.04 5660.45 226.42 Z
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4
coarse sand) in foundations and plinth
1.66mx0.115x0.50m=0.095cum.
Say 0.10 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.10 6882.00 688.20
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
1.20x0.50=0.60sqm
0.30x0.30=0.09sqm.
Total =0.69sqm. Say 0.70sqm.
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 0.70 386.55 270.59
1304 Surface box for stop cock each 1.00 125.00 125.00
(vi)
9977 Carriage of C.I. surface box L.S. 1.43 2.12 3.03
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4
graded stone aggregate 20mm nominal size) in slab =
0.53mx0.53mx0.075m = 0.02107cum.
Less surface box 0.112x0.112x0.076 =(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
5.3 Rate as per item No.5.3 SH : R.C.C cum 0.02 10719.30 214.39
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.038 645.00 -24.51
(ix)
9999 Sundries L.S. 4.16 2.12 8.82
TOTAL 1674.17
Add 1 % Water charges on "W-A" 1.12
TOTAL 1675.29
Add GST on "X-A" (multiplying factor 0.1405) 15.94
TOTAL 1691.23
Add 15% CPOH on "Y-A" 19.41
TOTAL 1710.65
Add Cess @ 1% on "Z-A" 1.49
Cost of one manhole 1712.13
Say 1712.15
18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. sur
box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 grade
stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nomi
size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per stand
design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including refilling and disposal of
surplus earth
1.21x1.21x1.00m=1.464cum.
Say 1.46 cum.
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 1.46 286.85 418.80 A A
2.25 Rate as per item No.2.25 of SH: Earth Work cum 1.46 253.95 370.77 A
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded A
A
stone aggregate 40mm nominal size)
A
1.21x1.21x0.1m=0.146cum. Say 0.15 cum. A
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.15 5660.45 849.07 A
(iii) Second class brick work in cement mortar 1: 4(1 Cement : WXYZ
4coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.57 6882.00 3922.74
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
A
WXYZ

finished with a floating coat of neat cement.


2.40x0.75=1.80sqm.
0.60x0.60=0.36sqm.
Total = 2.16sqm.
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.16 386.55 834.95
(v) C.I. surface box with hinged cover
100x100x75mm (inside)
1305 Surface box for sluice valve each 1.00 210.00 210.00
(vi)
9977 Carriage of C.I. surface box L.S. 8.06 2.12 17.09
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xd2x0.18m --
0.7854x0.156mx0.156mx0.18 = (-)0.0034 cum.
= 0.1651 cum. Say 0.17 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.17 10719.30 1822.28
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.32 645.00 -206.40
(ix) Mild steel reinforcement for RCC work etc.
0.165cum.x80kg/cum. = 13.2kg
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 13.20 88.95 1174.14
(x) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 0.86 766.55 659.23
(xi)
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 10089.75
Add 1 % Water charges on "W-A" 0.38
TOTAL 10090.13
Add GST on "X-A" (multiplying factor 0.1405) 5.36
TOTAL 10095.49
Add 15% CPOH on "Y-A" 6.53
TOTAL 10102.02
Add Cess @ 1% on "Z-A" 0.50
Cost of one manhole 10102.52
Say 10102.50
18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. su
box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nomi
size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per stand
design :

18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including refilling and disposal of
surplus earth
1.51X1.51X1.25 m = 2.85cum.
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 2.85 286.85 817.5225 A A
2.25 Rate as per item No.2.25 of SH: Earth work cum 2.85 253.95 723.76 A
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded A
A
stone aggregate 40mm nominal size)
A
1.51x1.51x0.1m=0.228cum. Say 0.23 cum. A
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.23 5660.45 1301.90 A
(iii) Second class brick work in cement foundations and plinth WXY
foundations and plinth Z
4.52mx0.23mx1.00m=1.04cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 1.04 6882.00 7157.28
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
3.60mx1.00m=3.60sqm
0.90mx0.90m
=0.81sqm.
Total=4.41sqm.
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 4.41 386.55 1704.69
(v) C.I. surface box with chained lid.
1305 Surface box for sluice valve each 1.00 210.00 210.00
9977 (vi) Carriage of C.I. surface box L.S. 8.06 2.12 17.09
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size) in slab =
1.36mx1.36mx0.15m = 0.2774 cum.
Less surface box 0.7854x0.156mx0.156mx
0.18m = (-)0.0034 cum.
= 0.2740 cum. Say 0.27 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.27 10719.30 2894.21
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.51 645.00 -328.95
(ix) Mild steel reinforcement for RCC work etc.
0.274cum.x80kg/cum. = 21.92 kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 21.92 88.95 1949.78
(x) Form work
0.90mx0.90m=0.81sqm.+
4.52mx0.15m = 0.68 sqm.
Total= 1.49 sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 1.49 766.55 1142.16
(xi)
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 17606.53
Add 1 % Water charges on "W-A" -0.85
TOTAL 17605.68
Add GST on "X-A" (multiplying factor 0.1405) -12.03
TOTAL 17593.65
Add 15% CPOH on "Y-A" -14.65
TOTAL 17579.00
Add Cess @ 1% on "Z-A" -1.12
Cost of one manhole 17577.88
Say 17577.90
18.35 Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand
graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 m
nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as p
standard design :

18.35.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including refilling and disposal of
surplus earth
1.81X1.81X1.25M
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 4.10 286.85 1176.09 A A
2.25 Rate as per item No.2.25 of SH: Earth work cum 4.10 253.95 1041.20 A
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded A
A
stone aggregate 40mm nominal size)
A
1.81x1.81x0.1m=0.328cum. Say 0.33 cum. A
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.33 5660.45 1867.95 A
(iii) Second class brick work in cement mortar 1:4 (1 Cement : WXY
4coarse sand) in foundations and plinth Z
5.72mx0.23mx1.00m=1.316cum.
Say 1.32 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 1.32 6882.00 9084.24
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
4.80mx1.00m=4.80sqm.
1.20mx1.20m=1.44sqm.
Total=6.42sqm.
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 6.42 386.55 2481.65
(v) C.I. surface box with chained lid
1305 Surface box for sluice valve each 1.00 210.00 210.00
9977 (vi) Carriage of C.I. surface box L.S. 8.06 2.12 17.09
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4
graded stone aggregate 20mm nominal size)
in slab = 1.66mx1.66mx0.15m = 0.4133 cum.
Less surface box 0.7854x0.156mx
0.156mx0.18m = (-)0.0034 cum.
Total= 0.4099 cum. Say 0.41 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.41 10719.30 4394.91
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.77 645.00 -496.65
(ix) Mild steel reinforcement for RCC slab steel @ 80kg/cum.
0.41cum.x80kg/cum. = 32.80kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC
work kg 32.80 88.95 2917.56
(x) Form work
1.20mx1.20m=1.44sqm.+
5.72mx0.15m=0.86 sqm.
Total = 2.30sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 2.30 766.55 1763.07
(xi)
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 24474.18
Add 1 % Water charges on "W-A" -2.52
TOTAL 24471.66
Add GST on "X-A" (multiplying factor 0.1405) -35.83
TOTAL 24435.83
Add 15% CPOH on "Y-A" -43.62
TOTAL 24392.21
Add Cess @ 1% on "Z-A" -3.34
Cost of one manhole 24388.86
Say 24388.85
18.36 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. su
box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nom
size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

18.36.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
AA
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for one chamber A
MATERIAL A
(i) Earth work in excavation including refilling and disposal of A
surplus earth A
1.21X1.21X1.00m = 1.464cum. Say 1.46cum. A
WXY
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 1.46 286.85 418.80 Z
2.25 Rate as per item No.2.25 of SH: Earth work cum 1.46 253.95 370.77
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.15 5660.45 849.07
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4
coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.57 6882.00 3922.74
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
2.40mx0.75m=1.80sqm.
0.90mx0.90m =0.36sqm.
Total=2.16sqm.
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.16 386.55 834.95
(v) C.I. surface box with chained lid
1305 Surface box for sluice valve each 1.00 210.00 210.00
9977 (vi) Carriage of C.I. surface box L.S. 53.82 2.12 114.10
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 0.61x0.41mx0.15m=
(-)0.0375 cum.
= 0.131 cum. Say 0.13 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.13 10719.30 1393.51
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.24 645.00 -154.80
(ix) Mild steel reinforcement for RCC work etc.
0.131cumx80kg/cum. = 10.48kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 10.48 88.95 932.20
(x) Form work
0.60mx0.60m=0.36sqm.+
3.32mx0.15m = 0.50 sqm.
Total =0.86 sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 0.86 766.55 659.23
(xi)
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 9567.65
Add 1 % Water charges on "W-A" 1.86
TOTAL 9569.51
Add GST on "X-A" (multiplying factor 0.1405) 26.45
TOTAL 9595.96
Add 15% CPOH on "Y-A" 32.20
TOTAL 9628.16
Add Cess @ 1% on "Z-A" 2.47
Cost of one manhole 9630.63
Say 9630.65
18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete wit
double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

18.37.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
AA
A
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for one chamber A
MATERIAL A
(i) Earth work in excavation including refilling and disposal of A
surplus earth A
WXYZ
1.21X1.06X0.85m = 1.09cum.
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work cum 1.09 286.85 312.67
2.25 Rate as per item No.2.25 of SH: Earth work cum 1.09 253.95 276.81
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.21x1.06x0.1m=0.128cum. Say 0.13 cum.
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.13 5660.45 735.86
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4
coarse sand) in foundations and plinth
3.02mx0.23mx0.50m=0.347cum.
Say 0.35 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.35 6882.00 2408.70
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand)
finished with a floating coat of neat cement.
2.10mx0.50m=1.05sqm.
0.60mx0.45m=0.27sqm.
Total=1.32sq
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 1.32 386.55 510.25
(v) C.I. surface box 400x200x200mm (inside) with locking
arrangement
1307 Surface box for water meter each 1.00 250.00 250.00
9977 (vi) Carriage of C.I. surface box L.S. 13.52 2.12 28.66
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m
= (-)0.018 cum.
= 0.223 cum. Say 0.22 cum.
5.3 Rate as per item No.5.3 Of SH: RCC cum 0.22 10719.30 2358.25
(viii) Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.41 645.00 -264.45
(ix) Mild steel reinforcement for RCC work
steel @ 80kg/cum.
0.223cum.x80kg/cum. = 17.84 kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 17.84 88.95 1586.87
(x) Form work
0.60mx0.45m=0.27sqm.+
3.02mx0.25m=0.76sqm.
Total = 1.03sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC sqm 1.03 766.55 789.55
(xi)
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 9010.24
Add 1 % Water charges on "W-A" 0.31
TOTAL 9010.55
Add GST on "X-A" (multiplying factor 0.1405) 4.44
TOTAL 9014.99
Add 15% CPOH on "Y-A" 5.41
TOTAL 9020.40
Add Cess @ 1% on "Z-A" 0.41
Cost of one manhole 9020.81
Say 9020.80
18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for ne
work :
18.38.1 15 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs. A


Details of cost for 10 metre AWXY
Perimeter = 0.0673 metre Z
Area=10x0.0673m = 0.673sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 0.673 55.50 37.35
Painting two coats excluding priming coat with white paint on
new work.
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 0.673 131.45 88.47
9999 Add for delay L.S. 13.52 2.12 28.66
TOTAL 154.48
Add 1 % Water charges on "W-A" 0.29
TOTAL 154.77
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 158.83
Add 15% CPOH on "Y-A" 4.95
TOTAL 163.79
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 164.17
Cost of one metre 16.42
Say 16.40

18.38.2 20 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Perimeter = 0.0845 metre
Area = 10x0.0845 sqm. = 0.845 sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 0.845 55.50 46.90
Painting two coats excluding priming coat with white paint on
new work. A
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 0.845 131.45 111.08 A W X Y
Z
9999 Add for delay L.S. 13.52 2.12 28.66
TOTAL 186.64
Add 1 % Water charges on "W-A" 0.29
TOTAL 186.92
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 190.99
Add 15% CPOH on "Y-A" 4.95
TOTAL 195.94
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 196.32
Cost of one metre 19.63
Say 19.65

18.38.3 25 mm diameter pipe

A
Code Description Unit Quantity Rate Rs. Amount Rs. AWXY
Details of cost for 10 metre Z
Perimeter = 0.1061 metre
Area = 10x0.1061 sqm. = 1.061 sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 1.061 55.50 58.89
Painting two coats excluding priming coat with white paint on
new work.
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 1.061 131.45 139.47
9999 Add for delay L.S. 20.28 2.12 42.99
TOTAL 241.35
Add 1 % Water charges on "W-A" 0.43
TOTAL 241.78
Add GST on "X-A" (multiplying factor 0.1405) 6.10
TOTAL 247.88
Add 15% CPOH on "Y-A" 7.43
TOTAL 255.31
Add Cess @ 1% on "Z-A" 0.57
Cost of 10 metre 255.88
Cost of one metre 25.59
Say 25.60
18.38.4 32 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre AWXY
Perimeter = 0.1334 metre Z
Area = 10x0.1334 sqm. = 1.334 sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 1.334 55.50 74.04
Painting two coats excluding priming coat with white paint on
new work.
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 1.334 131.45 175.35
9999 Add for delay L.S. 20.28 2.12 42.99
TOTAL 292.38
Add 1 % Water charges on "W-A" 0.43
TOTAL 292.81
Add GST on "X-A" (multiplying factor 0.1405) 6.10
TOTAL 298.92
Add 15% CPOH on "Y-A" 7.43
TOTAL 306.34
Add Cess @ 1% on "Z-A" 0.57
Cost of 10 metre 306.91
Cost of one metre 30.69
Say 30.70

18.38.5 40 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Perimeter = 0.1520 metre
Area = 10x0.1520 sqm. = 1.520 sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 1.52 55.50 84.36
Painting two coats excluding priming coat with white paint on
new work. A
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 1.52 131.45 199.80 A W X Y Z
9999 Add for delay L.S. 26.91 2.12 57.05
TOTAL 341.21
Add 1 % Water charges on "W-A" 0.57
TOTAL 341.78
Add GST on "X-A" (multiplying factor 0.1405) 8.10
TOTAL 349.88
Add 15% CPOH on "Y-A" 9.86
TOTAL 359.74
Add Cess @ 1% on "Z-A" 0.76
Cost of 10 metre 360.49
Cost of one metre 36.05
Say 36.05

18.38.6 50 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs. A


Details of cost for 10 metre AWXYZ
Perimeter = 0.1894 metre
Area = 10x0.1894 sqm. = 1.894 sqm.
Priming coat-
13.50.3 Rate as per item no 13.50.3 of SH : Finishing sqm 1.894 55.50 105.12
Painting two coats excluding priming coat with white paint on
new work.
13.61.1 Rate as per item no 13.61.1 of SH : Finishing sqm 1.894 131.45 248.97
9999 Add for delay L.S. 26.91 2.12 57.05
TOTAL 411.13
Add 1 % Water charges on "W-A" 0.57
TOTAL 411.70
Add GST on "X-A" (multiplying factor 0.1405) 8.10
TOTAL 419.80
Add 15% CPOH on "Y-A" 9.86
TOTAL 429.66
Add Cess @ 1% on "Z-A" 0.76
Cost of 10 metre 430.41
Cost of one metre 43.04
Say 43.05
18.39 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality :
18.39.1 15 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs. AWXYZ


Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 0.673 86.55 58.25
9999 Add for delay L.S. 8.06 2.12 17.09
TOTAL 75.34
Add 1 % Water charges on "W-A" 0.17
TOTAL 75.51
Add GST on "X-A" (multiplying factor 0.1405) 2.42
TOTAL 77.93
Add 15% CPOH on "Y-A" 2.95
TOTAL 80.88
Add Cess @ 1% on "Z-A" 0.23
Cost of 10 metre 81.11
Cost of one metre 8.11
Say 8.10

18.39.2 20 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs. AWXYZ


Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 0.845 86.55 73.13
9999 Add for delay L.S. 8.06 2.12 17.09
TOTAL 90.22
Add 1 % Water charges on "W-A" 0.17
TOTAL 90.39
Add GST on "X-A" (multiplying factor 0.1405) 2.42
TOTAL 92.82
Add 15% CPOH on "Y-A" 2.95
TOTAL 95.77
Add Cess @ 1% on "Z-A" 0.23
Cost of 10 metre 96.00
Cost of one metre 9.60
Say 9.60

18.39.3 25 mm diameter pipe

AWXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 1.061 86.55 91.83
9999 Add for delay L.S. 10.79 2.12 22.87
TOTAL 114.70
Add 1 % Water charges on "W-A" 0.23
TOTAL 114.93
Add GST on "X-A" (multiplying factor 0.1405) 3.25
TOTAL 118.18
Add 15% CPOH on "Y-A" 3.95
TOTAL 122.13
Add Cess @ 1% on "Z-A" 0.30
Cost of 10 metre 122.43
Cost of one metre 12.24
Say 12.25

18.39.4 32 mm diameter pipe

AWXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 1.334 86.55 115.46
9999 Add for delay L.S. 10.92 2.12 23.15
TOTAL 138.61
Add 1 % Water charges on "W-A" 0.23
TOTAL 138.84
Add GST on "X-A" (multiplying factor 0.1405) 3.29
TOTAL 142.12
Add 15% CPOH on "Y-A" 4.00
TOTAL 146.12
Add Cess @ 1% on "Z-A" 0.31
Cost of 10 metre 146.43
Cost of one metre 14.64
Say 14.65
18.39.5 40 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs. A W X Y Z
Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 1.52 86.55 131.56
9999 Add for delay L.S. 13.52 2.12 28.66
TOTAL 160.22
Add 1 % Water charges on "W-A" 0.29
TOTAL 160.51
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 164.57
Add 15% CPOH on "Y-A" 4.95
TOTAL 169.52
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 169.90
Cost of one metre 16.99
Say 17.00

18.39.6 50 mm diameter pipe

AWXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
Painting one coat with white paint on old work.
13.99.1 (Rate as per item no 13.99.1 of S.H. Finishing) sqm 1.894 86.55 163.93
9999 Add for delay L.S. 13.52 2.12 28.66
TOTAL 192.59
Add 1 % Water charges on "W-A" 0.29
TOTAL 192.87
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 196.94
Add 15% CPOH on "Y-A" 4.95
TOTAL 201.89
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 202.27
Cost of one metre 20.23
Say 20.25

18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
18.40.1 15 mm diameter pipe

AWXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 0.673 115.10 77.46
9999 Add for delay L.S. 8.06 2.12 17.09
TOTAL 94.55
Add 1 % Water charges on "W-A" 0.17
TOTAL 94.72
Add GST on "X-A" (multiplying factor 0.1405) 2.42
TOTAL 97.15
Add 15% CPOH on "Y-A" 2.95
TOTAL 100.10
Add Cess @ 1% on "Z-A" 0.23
Cost of 10 metre 100.32
Cost of one metre 10.03
Say 10.05

18.40.2 20 mm diameter pipe

AWXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 0.845 115.10 97.26
9999 Add for delay L.S. 8.06 2.12 17.09
TOTAL 114.35
Add 1 % Water charges on "W-A" 0.17
TOTAL 114.52
Add GST on "X-A" (multiplying factor 0.1405) 2.42
TOTAL 116.94
Add 15% CPOH on "Y-A" 2.95
TOTAL 119.89
Add Cess @ 1% on "Z-A" 0.23
Cost of 10 metre 120.12
Cost of one metre 12.01
Say 12.00
18.40.3 25 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs. AWXYZ
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 1.061 115.10 122.12
9999 Add for delay L.S. 10.79 2.12 22.87
TOTAL 145.00
Add 1 % Water charges on "W-A" 0.23
TOTAL 145.22
Add GST on "X-A" (multiplying factor 0.1405) 3.25
TOTAL 148.47
Add 15% CPOH on "Y-A" 3.95
TOTAL 152.42
Add Cess @ 1% on "Z-A" 0.30
Cost of 10 metre 152.73
Cost of one metre 15.27
Say 15.25

18.40.4 32 mm diameter pipe

AWXY
Code Description Unit Quantity Rate Rs. Amount Rs. Z
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 1.334 115.10 153.54
9999 Add for delay L.S. 10.79 2.12 22.87
TOTAL 176.42
Add 1 % Water charges on "W-A" 0.23
TOTAL 176.65
Add GST on "X-A" (multiplying factor 0.1405) 3.25
TOTAL 179.89
Add 15% CPOH on "Y-A" 3.95
TOTAL 183.85
Add Cess @ 1% on "Z-A" 0.30
Cost of 10 metre 184.15
Cost of one metre 18.41
Say 18.40

18.40.5 40 mm diameter pipe

AWXY
Code Description Unit Quantity Rate Rs. Amount Rs. Z
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 1.52 115.10 174.95
9999 Add for delay L.S. 12.22 2.12 25.91
TOTAL 200.86
Add 1 % Water charges on "W-A" 0.26
TOTAL 201.12
Add GST on "X-A" (multiplying factor 0.1405) 3.68
TOTAL 204.79
Add 15% CPOH on "Y-A" 4.48
TOTAL 209.27
Add Cess @ 1% on "Z-A" 0.34
Cost of 10 metre 209.61
Cost of one metre 20.96
Say 20.95

18.40.6 50 mm diameter pipe

AWXY
Code Description Unit Quantity Rate Rs. Amount Rs. Z
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 1.894 115.10 218.00
9999 Add for delay L.S. 12.22 2.12 25.91
TOTAL 243.91
Add 1 % Water charges on "W-A" 0.26
TOTAL 244.16
Add GST on "X-A" (multiplying factor 0.1405) 3.68
TOTAL 247.84
Add 15% CPOH on "Y-A" 4.48
TOTAL 252.32
Add Cess @ 1% on "Z-A" 0.34
Cost of 10 metre 252.66
Cost of one metre 25.27
Say 25.25
18.40.7 65 mm diameter pipe
AWXY
Code Description Unit Quantity Rate Rs. Amount Rs. Z
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 2.387 115.10 274.74
9999 Add for delay L.S. 13.52 2.12 28.66
TOTAL 303.41
Add 1 % Water charges on "W-A" 0.29
TOTAL 303.69
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 307.76
Add 15% CPOH on "Y-A" 4.95
TOTAL 312.71
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 313.09
Cost of one metre 31.31
Say 31.30
18.40.8 80 mm diameter pipe
AWXY
Code Description Unit Quantity Rate Rs. Amount Rs. Z
Details of cost for 10 metre
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finishing) sqm 2.796 115.10 321.82
9999 Add for delay L.S. 14.82 2.12 31.42
TOTAL 353.24
Add 1 % Water charges on "W-A" 0.31
TOTAL 353.55
Add GST on "X-A" (multiplying factor 0.1405) 4.46
TOTAL 358.01
Add 15% CPOH on "Y-A" 5.43
TOTAL 363.44
Add Cess @ 1% on "Z-A" 0.42
Cost of 10 metre 363.86
Cost of one metre 36.39
Say 36.40

18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
18.41.1 15 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of sand filling alround 15mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 = 0.744 cum.
Less for pipe = 3.142/4(21.8)²x10 = (-)0.004 cum.
= 0.74 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.74 2131.25 1577.13 A
TOTAL 1577.13
Cost of 10 metre 1577.13
Cost of one metre 157.71
Say 157.70

18.41.1A Sub analysis item for sand filling component

Code Description Unit Quantity Rate Rs. Amount Rs.


Sub analysis item for sand filling component
MATERIAL
6501 Sand zone V (Jamuna) cum 1.00 1300.00 1300.00
2335 Carriage of Jamuna sand cum 1.00 163.93 163.93
Labour:
0114 Beldar day 0.09 645.00 58.05 W X Y
0115 Coolie day 0.11 645.00 70.95 Z
TOTAL 1592.93
Add 1 % Water charges on "W" 15.93
TOTAL 1608.86
Add GST on "X" (multiplying factor 0.1405) 226.04
TOTAL 1834.90
Add 15% CPOH on "Y" 275.24
TOTAL 2110.14
Add Cess @ 1% on "Z" 21.10
Cost of one cum. 2131.24
Say 2131.25
18.41.2 20 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost of sand filling alround 20mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 27.3mm
= 252.3 Say 252mm
Quantity of sand = 10x0.30x0.252 = 0.756 cum.+
Less for pipe =3.142/4(27.3)²x10 = (-)0.006cum.
= 0.750 cum
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.75 2131.25 1598.44 A
TOTAL 1598.44
Cost of 10 metre 1598.44
Cost of one metre 159.84
Say 159.85

18.41.3 25 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of sand filling alround 25mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 34.2mm
= 259.2 Say 259mm
Quantity of sand = 10x0.30x0.259 = 0.777 cum.+
Less for pipe 3.142/4(34.2)²x10 = (-)0.009cum.
= 0.768 Say 0.77 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.77 2131.25 1641.06 A
TOTAL 1641.06
Cost of 10 metre 1641.06
Cost of one metre 164.11
Say 164.10

18.41.4 32 mm diameter pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost of sand filling alround 32mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 42.9mm
= 267.9 Say 268mm
Quantity of sand = 10x0.30x0.268 = 0.804 cum.+
Less for pipe 3.142/4(42.9)²x10 = (-)0.014cum.
= 0.790 Say 0.79 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.79 2131.25 1683.69 A
TOTAL 1683.69
Cost of 10 metre 1683.69
Cost of one metre 168.37
Say 168.35

18.41.5 40 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of sand filling alround 40mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 48.8mm
= 273.8 Say 274mm
Quantity of sand = 10x0.30x0.274 = 0.82 cum.+
Less for pipe 3.142/4(48.8)²x10 = (-)0.014cum.
= 0.801 Say 0.80 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.8 2131.25 1705.00 A
TOTAL 1705.00
Cost of 10 metre 1705.00
Cost of one metre 170.50
Say 170.50
18.41.6 50 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost of sand filling alround 50mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 60.8mm
= 285.8 Say 286mm
Quantity of sand = 10x0.30x0.286 = 0.858 cum.+
Less for pipe 3.142/4(60.8)²x10 = (-)0.029cum.
= 0.829 Say 0.83 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 0.83 2131.25 1768.94 A
TOTAL 1768.94
Cost of 10 metre 1768.94
Cost of one metre 176.89
Say 176.90

18.41.7 65 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of sand filling alround 65mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 76.6mm
= 301.6 Say 302mm
Quantity of sand = 10x0.45x0.302 = 1.359 cum.+
Less for pipe 3.142/4(76.6)²x10 = (-)0.046cum.
= 1.313 Say 1.31 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 1.31 2131.25 2791.94 A
TOTAL 2791.94
Cost of 10 metre 2791.94
Cost of one metre 279.19
Say 279.20

18.41.8 80 mm diameter pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of sand filling alround 80mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 89.9mm
= 314.9 Say 315mm
Quantity of sand = 10x0.45x0.315 = 1.418 cum.+
Less for pipe 3.142/4(89.9)²x10 = (-)0.0640cum.
= 1.354 Say 1.35 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 1.35 2131.25 2877.19 A
TOTAL 2877.19
Cost of 10 metre 2877.19
Cost of one metre 287.72
Say 287.70

18.41.9 100 mm diameter pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost of sand filling alround 100mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 115mm
= 340mm
Quantity of sand = 10x0.45x0.34 = 1.53 cum.+
Less for pipe 3.142/4(0.115)²x10 = (-)0.10cum.
= 1.43 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 1.43 2131.25 3047.69 A
TOTAL 3047.69
Cost of 10 metre 3047.69
Cost of one metre 304.77
Say 304.75
18.41.10 150 mm diameter pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost of sand filling alround 150mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 166.5mm
= 391.50mm Say 0.392m
Quantity of sand = 10x0.60x0.392 = 2.35 cum.+
Less for pipe 3.142/4(0.167)²x10 = (-)0.22cum.
= 2.13 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Water supply cum 2.13 2131.25 4539.56 A
TOTAL 4539.56
Cost of 10 metre 4539.56
Cost of one metre 453.96
Say 453.95
18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing
casing pipe after the hand pump / tube well is lowered and tested :
18.42.1 Up to 6 metres depth

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 6m depth
LABOUR For boring and removing the pipe-
0116 Fitter (grade 1) day 0.50 784.00 392.00
0114 Beldar day 3.00 645.00 1935.00
0010 Hire charges of Derrick monkey rope and other accessories day 0.50 750.00 375.00
Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. per
metre
1472 Casing pipe 100 mm dia metre 0.12 340.00 40.80 W X Y Z
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 2771.46
Add 1 % Water charges on "W" 27.71
TOTAL 2799.18
Add GST on "X" (multiplying factor 0.1405) 393.28
TOTAL 3192.46
Add 15% CPOH on "Y" 478.87
TOTAL 3671.33
Add Cess @ 1% on "Z" 36.71
Cost of 6 metre 3708.04
Cost of one metre 618.01
Say 618.00

18.42.2 Beyond 6 m and up to 12 m depth

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 6m depth
LABOUR for boring and removing the pipe-
0116 Fitter (grade 1) day 0.62 784.00 486.08
0114 Beldar day 3.50 645.00 2257.50
0010 Hire charges of Derrick monkey rope and other accessories day 0.62 750.00 465.00
Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. per
metre
1472 Casing pipe 100 mm dia metre 0.12 340.00 40.80 W X Y Z
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 3278.04
Add 1 % Water charges on "W" 32.78
TOTAL 3310.82
Add GST on "X" (multiplying factor 0.1405) 465.17
TOTAL 3775.99
Add 15% CPOH on "Y" 566.40
TOTAL 4342.39
Add Cess @ 1% on "Z" 43.42
Cost of 6 metre 4385.82
Cost of one metre 730.97
Say 730.95
18.42.3 Beyond 12 m and up to 18 m depth
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 6m depth
LABOUR
For boring and removing the pipe-
0116 Fitter (grade 1) day 0.75 784.00 588.00
0114 Beldar day 4.00 645.00 2580.00
0010 Hire charges of Derrickmonkey rope and other accessories day 0.75 750.00 562.50
Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. per
metre
1472 Casing pipe 100 mm dia metre 0.12 340.00 40.80
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 3799.96
Add 1 % Water charges on "W" 38.00
TOTAL 3837.96
Add GST on "X" (multiplying factor 0.1405) 539.23
TOTAL 4377.20
Add 15% CPOH on "Y" 656.58 W X Y
TOTAL 5033.78 Z
Add Cess @ 1% on "Z" 50.34
Cost of 6 metre 5084.11
Cost of one metre 847.35
Say 847.35
18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one strainer 1.5 long
MATERIAL
1882 Strainer brass 40 mm dia 1.5 metre long each 1.00 625.00 625.00
9977 Carriage to site L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.17 784.00 133.28
0114 Beldar day 0.17 645.00 109.65
9999 Sundreis including hamp white lead etc. L.S. 7.15 2.12 15.16
TOTAL 911.75
Add 1 % Water charges on "W" 9.12
TOTAL 920.87
Add GST on "X" (multiplying factor 0.1405) 129.38
TOTAL 1050.25
Add 15% CPOH on "Y" 157.54 W X Y
TOTAL 1207.79 Z
Add Cess @ 1% on "Z" 12.08
Cost of 1.5 metre 1219.87
Cost of one metre 813.24
Say 813.25
18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for a depth of 10 metre
MATERIAL
1549 G.I. pipes 40 mm dia metre 10.20 290.00 2958.00
Carriage of 40mm pipe(36.5kg)
Added 2% wastage and fitting
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.03723 145.72 5.43
9999 White lead, hamp and oil etc. L.S. 6.76 2.12 14.33
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.75 645.00 483.75
9999 Sundries L.S. 7.25 2.12 15.37
TOTAL 3735.60
Add 1 % Water charges on "W" 37.36
TOTAL 3772.95
Add GST on "X" (multiplying factor 0.1405) 530.10
TOTAL 4303.05
Add 15% CPOH on "Y" 645.46
TOTAL 4948.51 W X Y Z
Add Cess @ 1% on "Z" 49.49
Cost for 10 metre 4998.00
Cost of one metre 499.80
Say 499.80
18.45 Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete
with all accessories.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one pump
MATERIAL
1693 S.C.I. hand pump each 1.00 700.00 700.00
9977 Carriage L.S. 13.52 2.12 28.66
LABOUR
0116 Fitter (grade 1) day 0.10 784.00 78.40
0114 Beldar day 0.10 645.00 64.50 W X Y Z
9999 Sundries L.S. 4.42 2.12 9.37
TOTAL 880.93
Add 1 % Water charges on "W" 8.81
TOTAL 889.74
Add GST on "X" (multiplying factor 0.1405) 125.01
TOTAL 1014.75
Add 15% CPOH on "Y" 152.21
TOTAL 1166.96
Add Cess @ 1% on "Z" 11.67
Cost for one hand pump 1178.63
Say 1178.65
18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
18.46.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1641 G.I. Union 15 mm nominal bore each 1.00 35.00 35.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 196.05
Add 1 % Water charges on "W" 1.96
TOTAL 198.01
Add GST on "X" (multiplying factor 0.1405) 27.82
TOTAL 225.83
Add 15% CPOH on "Y" 33.87
TOTAL 259.70
Add Cess @ 1% on "Z" 2.60
Cost for one no. 262.30
Say 262.30

18.46.2 20 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1642 G.I. Union 20 mm nominal bore each 1.00 55.00 55.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 216.05
Add 1 % Water charges on "W" 2.16
TOTAL 218.21
Add GST on "X" (multiplying factor 0.1405) 30.66
TOTAL 248.87
Add 15% CPOH on "Y" 37.33
TOTAL 286.20
Add Cess @ 1% on "Z" 2.86
Cost for one no. 289.06
Say 289.05
18.46.3 25 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1643 G.I. Union 25 mm nominal bore each 1.00 115.00 115.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.11 645.00 70.95 W X Y Z
TOTAL 276.05
Add 1 % Water charges on "W" 2.76
TOTAL 278.81
Add GST on "X" (multiplying factor 0.1405) 39.17
WXYZ

TOTAL 317.98
Add 15% CPOH on "Y" 47.70
TOTAL 365.68
Add Cess @ 1% on "Z" 3.66
Cost for one no. 369.34
Say 369.35

18.46.4 32 mm nominal bore


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1644 G.I. Union 32 mm nominal bore each 1.00 145.00 145.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24
WXY
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 306.05
Add 1 % Water charges on "W" 3.06
TOTAL 309.11
Add GST on "X" (multiplying factor 0.1405) 43.43
TOTAL 352.54
Add 15% CPOH on "Y" 52.88
TOTAL 405.42
Add Cess @ 1% on "Z" 4.05
Cost for one no. 409.47
Say 409.45

18.46.5 40 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1645 G.I. Union 40 mm nominal bore each 1.00 230.00 230.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24 W X Y
0114 Beldar day 0.11 645.00 70.95 Z
TOTAL 391.05
Add 1 % Water charges on "W" 3.91
TOTAL 394.96
Add GST on "X" (multiplying factor 0.1405) 55.49
TOTAL 450.45
Add 15% CPOH on "Y" 67.57
TOTAL 518.02
Add Cess @ 1% on "Z" 5.18
Cost for one no. 523.20
Say 523.20
18.46.6 50 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1646 G.I. Union 50 mm nominal bore each 1.00 310.00 310.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.15 784.00 117.60 W X Y
0114 Beldar day 0.15 645.00 96.75 Z
TOTAL 528.21
Add 1 % Water charges on "W" 5.28
TOTAL 533.49
Add GST on "X" (multiplying factor 0.1405) 74.96
TOTAL 608.45
Add 15% CPOH on "Y" 91.27
TOTAL 699.71
Add Cess @ 1% on "Z" 7.00
Cost for one no. 706.71
Say 706.70

18.46.7 65 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL

WXY
Z
1647 G.I. Union 65 mm nominal bore each 1.00 525.00 525.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.15 784.00 117.60
WXY
0114 Beldar day 0.15 645.00 96.75 Z
TOTAL 743.21
Add 1 % Water charges on "W" 7.43
TOTAL 750.64
Add GST on "X" (multiplying factor 0.1405) 105.46
TOTAL 856.11
Add 15% CPOH on "Y" 128.42
TOTAL 984.52
Add Cess @ 1% on "Z" 9.85
Cost for one no. 994.37
Say 994.35

18.46.8 80 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1648 G.I. Union 80mm nominal bore each 1.00 575.00 575.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.15 784.00 117.60
0114 Beldar day 0.15 645.00 96.75
TOTAL 793.21 W X Y
Add 1 % Water charges on "W" 7.93 Z
TOTAL 801.14
Add GST on "X" (multiplying factor 0.1405) 112.56
TOTAL 913.70
Add 15% CPOH on "Y" 137.06
TOTAL 1050.76
Add Cess @ 1% on "Z" 10.51
Cost for one no. 1061.26
Say 1061.25
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling th
earth or cutting of wall and making good the same complete wherever required :

18.47.1 15 mm nominal bore


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1641 G.I. Union 15 mm nominal bore each 1.00 35.00 35.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85 W X Y Z
TOTAL 510.43
Add 1 % Water charges on "W" 5.10
TOTAL 515.53
Add GST on "X" (multiplying factor 0.1405) 72.43
TOTAL 587.97
Add 15% CPOH on "Y" 88.19
TOTAL 676.16
Add Cess @ 1% on "Z" 6.76
Cost for one no. 682.92
Say 682.90

18.47.2 20 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1642 G.I. Union 20 mm nominal bore each 1.00 55.00 55.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85 W X Y Z
TOTAL 530.43
Add 1 % Water charges on "W" 5.30
TOTAL 535.73
Add GST on "X" (multiplying factor 0.1405) 75.27
TOTAL 611.00
Add 15% CPOH on "Y" 91.65
TOTAL 702.65
Add Cess @ 1% on "Z" 7.03
Cost for one no. 709.68
Say 709.70

18.47.3 25 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1643 G.I. Union 25 mm nominal bore each 1.00 115.00 115.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85 W X Y Z
TOTAL 590.43
Add 1 % Water charges on "W" 5.90
TOTAL 596.33
Add GST on "X" (multiplying factor 0.1405) 83.78
TOTAL 680.12
Add 15% CPOH on "Y" 102.02
TOTAL 782.14
Add Cess @ 1% on "Z" 7.82
Cost for one no. 789.96
Say 789.95
18.47.4 32 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1644 G.I. Union 32 mm nominal bore each 1.00 145.00 145.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85 W X Y Z
TOTAL 620.43
Add 1 % Water charges on "W" 6.20
TOTAL 626.63
Add GST on "X" (multiplying factor 0.1405) 88.04
TOTAL 714.67
Add 15% CPOH on "Y" 107.20
TOTAL 821.88
Add Cess @ 1% on "Z" 8.22
Cost for one no. 830.09
Say 830.10

18.47.5 40 mm nominal bore


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1645 G.I. Union 40 mm nominal bore each 1.00 230.00 230.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0114 Beldar day 0.33 645.00 212.85 W X Y Z
TOTAL 705.43
Add 1 % Water charges on "W" 7.05
TOTAL 712.48
Add GST on "X" (multiplying factor 0.1405) 100.10
TOTAL 812.59
Add 15% CPOH on "Y" 121.89
TOTAL 934.47
Add Cess @ 1% on "Z" 9.34
Cost for one no. 943.82
Say 943.80

18.47.6 50 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1646 G.I. Union 50 mm nominal bore each 1.00 310.00 310.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86

WXYZ
LABOUR
0116 Fitter (grade 1) day 0.45 784.00 352.80
0114 Beldar day 0.45 645.00 290.25 W X Y Z
TOTAL 956.91
Add 1 % Water charges on "W" 9.57
TOTAL 966.48
Add GST on "X" (multiplying factor 0.1405) 135.79
TOTAL 1102.27
Add 15% CPOH on "Y" 165.34
TOTAL 1267.61
Add Cess @ 1% on "Z" 12.68
Cost for one no. 1280.28
Say 1280.30
18.47.7 65 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
1647 G.I. Union 65 mm nominal bore each 1.00 525.00 525.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.45 784.00 352.80
0114 Beldar day 0.45 645.00 290.25 W X Y Z
TOTAL 1171.91
Add 1 % Water charges on "W" 11.72
TOTAL 1183.63
Add GST on "X" (multiplying factor 0.1405) 166.30
TOTAL 1349.93
Add 15% CPOH on "Y" 202.49
TOTAL 1552.42
Add Cess @ 1% on "Z" 15.52
Cost for one no. 1567.94
Say 1567.95

18.47.8 80 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
1648 G.I. Union 80mm nominal bore each 1.00 575.00 575.00
9988 Carriage of materials and sundries L.S. 1.82 2.12 3.86
LABOUR
0116 Fitter (grade 1) day 0.45 784.00 352.80
WXYZ
0114 Beldar day 0.45 645.00 290.25
TOTAL 1221.91
Add 1 % Water charges on "W" 12.22
TOTAL 1234.13
Add GST on "X" (multiplying factor 0.1405) 173.39
TOTAL 1407.52
Add 15% CPOH on "Y" 211.13
TOTAL 1618.65
Add Cess @ 1% on "Z" 16.19
Cost for one no. 1634.84
Say 1634.85
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangem
and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 500 litres
MATERIAL
1649 Polyethylene water storage tank with cover and suitable locking
arrangement per litre 500.00 6.10 3050.00
9977 Carriage to site L.S. 179.40 2.12 380.33
9999 Placing at terrace L.S. 89.70 2.12 190.16 W X Y Z
TOTAL 3620.49
Add 1 % Water charges on "W" 36.20
TOTAL 3656.70
Add GST on "X" (multiplying factor 0.1405) 513.77
TOTAL 4170.46
Add 15% CPOH on "Y" 625.57
TOTAL 4796.03
Add Cess @ 1% on "Z" 47.96
Cost for 500 litre 4843.99
Cost of one litre 9.69
Say 9.70

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque whi
as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings
18.48A fixtures for tank shall be paid separately.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. tank of 500 litres
MATERIAL
1649 Polyethylene water storage tank with cover and suitable locking
arrangement per litre 500.00 6.10 3050.00
9977 Carriage to site L.S. 179.40 2.12 380.33
9999 Placing at terrace L.S. 89.70 2.12 190.16 W X Y Z
TOTAL 3620.49
Add 1 % Water charges on "W" 36.20
TOTAL 3656.70
Add GST on "X" (multiplying factor 0.1405) 513.77
TOTAL 4170.46
Add 15% CPOH on "Y" 625.57
TOTAL 4796.03
Add Cess @ 1% on "Z" 47.96
Cost of 500 liters 4843.99
Cost of 1 litre 9.69
Say 9.70

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
18.49.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7257 C.P. Brass bibcock 15 mm each 1.00 300.00 300.00
9988 Carrige of material and fixing charges L.S. 11.57 2.12 24.53
TOTAL 324.53 W X Y
Z
Add 1 % Water charges on "W" 3.25
TOTAL 327.77
Add GST on "X" (multiplying factor 0.1405) 46.05
TOTAL 373.83
Add 15% CPOH on "Y" 56.07
TOTAL 429.90
Add Cess @ 1% on "Z" 4.30
Cost of 1 no. 434.20
Say 434.20
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for one no.
MATERIAL
7258 C.P. Brass long nose bibcock 15 mm each 1.00 500.00 500.00
9988 Carrige of material and fixing charges L.S. 16.25 2.12 34.45
TOTAL 534.45
Add 1 % Water charges on "W" 5.34
TOTAL 539.79
Add GST on "X" (multiplying factor 0.1405) 75.84
TOTAL 615.64
Add 15% CPOH on "Y" 92.35
TOTAL 707.98
Add Cess @ 1% on "Z" 7.08
Cost of 1 no. 715.06
Say 715.05
18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
18.51.1 15 mm nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7259 C.P. Brass long body bibcock 15 mm each 1.00 500.00 500.00
9988 Carrige of material and fixing charges L.S. 13.91 2.12 29.49
TOTAL 529.49 W X Y
Add 1 % Water charges on "W" 5.29 Z
TOTAL 534.78
Add GST on "X" (multiplying factor 0.1405) 75.14
TOTAL 609.92
Add 15% CPOH on "Y" 91.49
TOTAL 701.41
Add Cess @ 1% on "Z" 7.01
Cost of 1 no. 708.42
Say 708.40

18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
18.52.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7260 C.P. Brass stop cock (concealed) 15 mm each 1.00 420.00 420.00
9988 Carrige of material and fixing charges L.S. 11.57 2.12 24.53
TOTAL 444.53 W X Y
Z
Add 1 % Water charges on "W" 4.45
TOTAL 448.97
Add GST on "X" (multiplying factor 0.1405) 63.08
TOTAL 512.05
Add 15% CPOH on "Y" 76.81
TOTAL 588.86
Add Cess @ 1% on "Z" 5.89
Cost of 1 no. 594.75
Say 594.75

18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
18.53.1 15mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7261 C.P. Brass angle valve 15 mm each 1.00 350.00 350.00
9988 Carriage and fixing charges L.S. 11.31 2.12 23.98
TOTAL 373.98 W X Y
Add 1 % Water charges on "W" 3.74 Z
TOTAL 377.72
Add GST on "X" (multiplying factor 0.1405) 53.07
TOTAL 430.79
Add 15% CPOH on "Y" 64.62
TOTAL 495.40
Add Cess @ 1% on "Z" 4.95
Cost of 1 no. 500.36
Say 500.35
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
0593 C.P. Brass Extension Nipple (1/2"x2" size) each 1.00 40.00 40.00
9999 Sundries L.S. 2.89 2.12 6.13
WXY
TOTAL 46.13
Z
Add 1 % Water charges on "W" 0.46
TOTAL 46.59
Add GST on "X" (multiplying factor 0.1405) 6.55
TOTAL 53.13
Add 15% CPOH on "Y" 7.97
TOTAL 61.10
Add Cess @ 1% on "Z" 0.61
Cost of 1 no. 61.71
Say 61.70

18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
7400 15 mm PTMT bib cock each 1.00 65.00 65.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 82.09
Add 1 % Water charges on "W" 0.82
TOTAL 82.91
Add GST on "X" (multiplying factor 0.1405) 11.65
TOTAL 94.56
Add 15% CPOH on "Y" 14.18
TOTAL 108.74
Add Cess @ 1% on "Z" 1.09
Cost of 1 no. 109.83
Say 109.85

18.54.2 15 mm nominal bore, 122mm long, weighing not less than 99 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7401 15 mm PTMT bib cockwith flange (fancy) each 1.00 90.00 90.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 107.09 W X Y Z
Add 1 % Water charges on "W" 1.07
TOTAL 108.16
Add GST on "X" (multiplying factor 0.1405) 15.20
TOTAL 123.35
Add 15% CPOH on "Y" 18.50
TOTAL 141.86
Add Cess @ 1% on "Z" 1.42
Cost of 1 no. 143.28
Say 143.30

18.54.3 15 mm nominal bore, 165 mm long, weighing not less than 110 gms

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
7402 15 mm PTMT bib cock long body with flange each 1.00 100.00 100.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 117.09
Add 1 % Water charges on "W" 1.17
TOTAL 118.26
Add GST on "X" (multiplying factor 0.1405) 16.62
TOTAL 134.87
Add 15% CPOH on "Y" 20.23
TOTAL 155.10
Add Cess @ 1% on "Z" 1.55
Cost of 1 No.. 156.66
Say 156.65
18.54.4 15 mm nominal bore, 90 mm long, weighing not less than 93 gms
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
7859 P.T.M.T. Bib cock with nozzle 15mm each 1.00 110.00 110.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 127.09
Add 1 % Water charges on "W" 1.27
TOTAL 128.36
Add GST on "X" (multiplying factor 0.1405) 18.03
TOTAL 146.39
Add 15% CPOH on "Y" 21.96
TOTAL 168.35
Add Cess @ 1% on "Z" 1.68
Cost of 1 no. 170.03
Say 170.05

18.55 Providing and fixing PTMT stop cock of approved quality and colour.
18.55.1 15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7403 15 mm dia PTMT stop cock (male thread) each 1.00 60.00 60.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 77.09 W X Y Z
Add 1 % Water charges on "W" 0.77
TOTAL 77.86
Add GST on "X" (multiplying factor 0.1405) 10.94
TOTAL 88.80
Add 15% CPOH on "Y" 13.32
TOTAL 102.12
Add Cess @ 1% on "Z" 1.02
Cost of 1 no. 103.14
Say 103.15

18.55.2 20 mm nominal bore, 89 mm long, weighing not less than 88 gms


Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
7405 20 mm dia. PTMT stop cock each 1.00 68.00 68.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 85.09
Add 1 % Water charges on "W" 0.85
TOTAL 85.94
Add GST on "X" (multiplying factor 0.1405) 12.07
TOTAL 98.01
Add 15% CPOH on "Y" 14.70
TOTAL 112.71
Add Cess @ 1% on "Z" 1.13
Cost of 1 no. 113.84
Say 113.85

18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7861 P.T.M.T. Stop cock (concealed) 15mm each 1.00 120.00 120.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 137.09 W X Y Z
Add 1 % Water charges on "W" 1.37
TOTAL 138.46
Add GST on "X" (multiplying factor 0.1405) 19.45
TOTAL 157.91
Add 15% CPOH on "Y" 23.69
TOTAL 181.60
Add Cess @ 1% on "Z" 1.82
Cost of 1 no. 183.41
Say 183.40
18.56 Providing and fixing PTMT pillar cock of approved quality and colour.
18.56.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
7406 PTMT pillar cock each 1.00 115.00 115.00
9988 Carriage of materials and fixing charges L.S. 9.49 2.12 20.12
TOTAL 135.12 W X Y Z
Add 1 % Water charges on "W" 1.35
TOTAL 136.47
Add GST on "X" (multiplying factor 0.1405) 19.17
TOTAL 155.64
Add 15% CPOH on "Y" 23.35
TOTAL 178.99
Add Cess @ 1% on "Z" 1.79
Cost of 1 no. 180.78
Say 180.80

18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7410 PTMT pillar cock (fancy) 15 mm foam flow. each 1.00 125.00 125.00
9988 Carriage of materials and fixing charges L.S. 9.49 2.12 20.12
TOTAL 145.12 W X Y
Z
Add 1 % Water charges on "W" 1.45
TOTAL 146.57
Add GST on "X" (multiplying factor 0.1405) 20.59
TOTAL 167.16
Add 15% CPOH on "Y" 25.07
TOTAL 192.24
Add Cess @ 1% on "Z" 1.92
Cost of 1 no. 194.16
Say 194.15

18.57 Providing and fixing PTMT, push cock of approved quality and colour.
18.57.1 15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7407 PTMT push cock 15 mm dia. each 1.00 55.00 55.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 72.09 W X Y
Add 1 % Water charges on "W" 0.72 Z
TOTAL 72.81
Add GST on "X" (multiplying factor 0.1405) 10.23
TOTAL 83.04
Add 15% CPOH on "Y" 12.46
TOTAL 95.49
Add Cess @ 1% on "Z" 0.95
Cost of 1 no. 96.45
Say 96.45

18.57.2 15 mm nominal bore, 80 mm long, weighing not less than 46 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7408 PTMT push cock 12 mm dia. 20 mm BSP each 1.00 45.00 45.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 62.09 W X Y
Z
Add 1 % Water charges on "W" 0.62
TOTAL 62.71
Add GST on "X" (multiplying factor 0.1405) 8.81
TOTAL 71.52
Add 15% CPOH on "Y" 10.73
TOTAL 82.25
Add Cess @ 1% on "Z" 0.82
Cost of 1 no. 83.07
Say 83.05
18.58 Providing and fixing PTMT grating of approved quality and colour.
18.58.1 Circular type
18.58.1.1 100 mm nominal dia

Code Description Unit Quantity Rate Rs. Amount Rs.

WXY
Z
Details of cost for 1 no.
MATERIAL
7409 PTMT grating 100 mm dia. each 1.00 16.00 16.00
9988 Carriage of materials and fixing charges L.S. 4.16 2.12 8.82
TOTAL 24.82 W X Y
Z
Add 1 % Water charges on "W" 0.25
TOTAL 25.07
Add GST on "X" (multiplying factor 0.1405) 3.52
TOTAL 28.59
Add 15% CPOH on "Y" 4.29
TOTAL 32.88
Add Cess @ 1% on "Z" 0.33
Cost of 1 no. 33.21
Say 33.20

18.58.1.2 125 mm nominal dia with 25 mm waste hole

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7411 125 mm grating withwaste hole each 1.00 25.00 25.00
9988 Carriage of materials and fixing charges L.S. 4.16 2.12 8.82
TOTAL 33.82 W X Y Z
Add 1 % Water charges on "W" 0.34
TOTAL 34.16
Add GST on "X" (multiplying factor 0.1405) 4.80
TOTAL 38.96
Add 15% CPOH on "Y" 5.84
TOTAL 44.80
Add Cess @ 1% on "Z" 0.45
Cost of 1 no. 45.25
Say 45.25

18.58.2 Rectangular type with openable circular lid


18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
7412 Rectangular type with openable circular lid 150 mm size 18 mm
high with 100 mm dia. (110 gm) each 1.00 118.00 118.00
9988 Carriage of materials and fixing charges L.S. 4.16 2.12 8.82 W X Y Z
TOTAL 126.82
Add 1 % Water charges on "W" 1.27
TOTAL 128.09
Add GST on "X" (multiplying factor 0.1405) 18.00
TOTAL 146.08
Add 15% CPOH on "Y" 21.91
TOTAL 168.00
Add Cess @ 1% on "Z" 1.68
Cost of 1 no. 169.68
Say 169.70

18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc i
required will be paid separately) :

18.59.1 50 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 no. double acting air
valves
MATERIAL
7415 Double acting air valve 50 mm each 10.00 3715.00 37150.00
9977 Carriage of air valves L.S. 26.00 2.12 55.12
9999 Labour for laying double acting air valve L.S. 39.00 2.12 82.68
Providing flanged joints to double acting air valves with bolts, AW
nuts and rubber insertions etc. XYZ
18.30.1 (Rate as per item no 18.30.1 of SH : Water Supply) each 10.00 182.85 1828.50
TOTAL 39116.30
Add 1 % Water charges on "W-A" 372.88
TOTAL 39489.18
Add GST on "X-A" (multiplying factor 0.1405) 5291.33
TOTAL 44780.50
Add 15% CPOH on "Y-A" 6442.80
TOTAL 51223.30
Add Cess @ 1% on "Z-A" 493.95
Cost of 10 air valves 51717.25
Cost of 1 air valve 5171.73
Say 5171.75

18.59.2 80 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 no. double acting air
valves
MATERIAL
7416 Double acting air valve 80 mm each 10.00 4525.00 45250.00
9977 Carriage of air valves L.S. 26.00 2.12 55.12
9999 Labour for laying double acting air valve L.S. 39.00 2.12 82.68
Providing flanged joints to double acting air valves with bolts, AW
nuts and rubber insertions etc. XYZ
18.30.1 (Rate as per item no 18.30.1 of SH : Water Supply) each 10.00 182.85 1828.50
TOTAL 47216.30
Add 1 % Water charges on "W-A" 453.88
TOTAL 47670.18
Add GST on "X-A" (multiplying factor 0.1405) 6440.76
TOTAL 54110.93
Add 15% CPOH on "Y-A" 7842.37
TOTAL 61953.30
Add Cess @ 1% on "Z-A" 601.25
Cost of 10 air valves 62554.55
Cost of 1 air valve 6255.45
Say 6255.45

18.59.3 100 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 no. double acting
air valves
MATERIAL
7417 Double acting air valve 100 mm each 10.00 5910.00 59100.00
9977 Carriage of air valves L.S. 26.00 2.12 55.12
9999 Labour for laying double acting air valve L.S. 52.00 2.12 110.24
Providing flanged joints to double acting air valves with bolts, AW
nuts and rubber insertions etc. XYZ
18.30.2 (Rate as per item No.18.30.2 Of SH:Water Supply) each 10.00 284.75 2847.50
TOTAL 62112.86
Add 1 % Water charges on "W-A" 592.65
TOTAL 62705.51
Add GST on "X-A" (multiplying factor 0.1405) 8410.05
TOTAL 71115.56
Add 15% CPOH on "Y-A" 10240.21
TOTAL 81355.77
Add Cess @ 1% on "Z-A" 785.08
Cost of 10 air valves 82140.86
Cost of 1 air valve 8214.09
Say 8214.10
18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rub
insertions etc. (The tail pieces if required will be paid separately) :
18.60.1 80 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. water meter
MATERIAL
7418 Water meter (including testing charges) 80 mm each 1.00 2030.00 2030.00
9977 Carriage of water meter L.S. 26.00 2.12 55.12
9999 Labour for laying water meter L.S. 39.00 2.12 82.68
Providing flanged joints to double acting air valves with bolts, AW
nuts and rubber insertions etc. XY
18.30.1 (Rate as per item no 18.30.1 of SH : Water Supply) each 2.00 182.85 365.70 Z
TOTAL 2533.50
Add 1 % Water charges on "W-A" 21.68
TOTAL 2555.18
Add GST on "X-A" (multiplying factor 0.1405) 307.62
TOTAL 2862.80
Add 15% CPOH on "Y-A" 374.56
TOTAL 3237.36
Add Cess @ 1% on "Z-A" 28.72
Cost of 1 water meter 3266.08
Say 3266.10

18.60.2 100 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. water meter
MATERIAL
7419 Water meter (including testing charges) 100 mm each 1.00 3143.00 3143.00
9977 Carriage of water meter L.S. 26.00 2.12 55.12
9999 Labour for laying water meter L.S. 52.00 2.12 110.24
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
XYZ
18.30.2 (Rate as per item No.18.30.2) each 2.00 284.75 569.50
TOTAL 3877.86
Add 1 % Water charges on "W-A" 33.08
TOTAL 3910.94
Add GST on "X-A" (multiplying factor 0.1405) 469.47
TOTAL 4380.42
Add 15% CPOH on "Y-A" 571.64
TOTAL 4952.05
Add Cess @ 1% on "Z-A" 43.83
Cost of 1 water meter 4995.88
Say 4995.90

18.60.3 150 mm dia nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. water meter
MATERIAL
7420 Water meter (including testing charges) 150 mm each 1.00 4765.00 4765.00
9977 Carriage of water meter L.S. 39.00 2.12 82.68
9999 Labour for laying water meter L.S. 65.00 2.12 137.80
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
XYZ
18.30.4 (Rate as per item No.18.30.4 Of SH: Water Supply) each 2.00 343.55 687.10
TOTAL 5672.58
Add 1 % Water charges on "W-A" 49.85
TOTAL 5722.43
Add GST on "X-A" (multiplying factor 0.1405) 707.46
TOTAL 6429.90
Add 15% CPOH on "Y-A" 861.42
TOTAL 7291.32
Add Cess @ 1% on "Z-A" 66.04
Cost of 1 water meter 7357.36
Say 7357.35
18.60.4 200 mm dia nominal bore
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no. water meter
MATERIAL
7421 Water meter (including testing charges) 200 mm each 1.00 5145.00 5145.00
9977 Carriage of water meter L.S. 52.00 2.12 110.24
9999 Labour for laying water meter L.S. 104.00 2.12 220.48
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
XYZ
18.30.5 (Rate as per item no 20.47.5 of SH : Water Supply) each 2.00 377.00 754.00
TOTAL 6229.72
Add 1 % Water charges on "W-A" 54.76
TOTAL 6284.48
Add GST on "X-A" (multiplying factor 0.1405) 777.03
TOTAL 7061.51
Add 15% CPOH on "Y-A" 946.13
TOTAL 8007.64
Add Cess @ 1% on "Z-A" 72.54
Cost of 1 water meter 8080.17
Say 8080.15
18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
18.61.1 80 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for on no. dirt box strainer
MATERIAL
7422 Dirt box srainer 80 mm each 1.00 2680.00 2680.00

AW
XYZ
9977 Carriage of dirt box strainer L.S. 26.00 2.12 55.12
9999 Labour for laying dirt box strainer L.S. 39.00 2.12 82.68
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
XYZ
18.30.1 (Rate as per item no 18.30.1 of SH : Water Supply) each 2.00 182.85 365.70
TOTAL 3183.50
Add 1 % Water charges on "W-A" 28.18
TOTAL 3211.68
Add GST on "X-A" (multiplying factor 0.1405) 399.86
TOTAL 3611.54
Add 15% CPOH on "Y-A" 486.88
TOTAL 4098.41
Add Cess @ 1% on "Z-A" 37.33
Cost of 1 dirt box stainer 4135.74
Say 4135.75

18.61.2 100 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no. dirt box stainer
MATERIAL
7423 Dirt box srainer 100 mm each 1.00 4370.00 4370.00
9977 Carriage of dirt box strainer L.S. 26.00 2.12 55.12
9999 Labour for laying dirt box strainer L.S. 52.00 2.12 110.24
Providing flanged joints to double acting air valves with bolts,
AW
nuts and rubber insertions etc.
X
18.30.2 (Rate as per item No.18.30.2 Of SH:Water Supply) each 2.00 284.75 569.50 Y Z
TOTAL 5104.86
Add 1 % Water charges on "W-A" 45.35
TOTAL 5150.21
Add GST on "X-A" (multiplying factor 0.1405) 643.59
TOTAL 5793.80
Add 15% CPOH on "Y-A" 783.65
TOTAL 6577.45
Add Cess @ 1% on "Z-A" 60.08
Cost of 1 dirt box stainer 6637.53
Say 6637.55
18.61.3 150 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no. dirt box stainer
MATERIAL
7424 Dirt box srainer 150 mm each 1.00 5540.00 5540.00
9977 Carriage of dirt box strainer L.S. 39.00 2.12 82.68
9999 Labour for laying dirt box strainer L.S. 65.00 2.12 137.80
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
18.30.4 (Rate as per item No.18.30.4 Of SH:Water Supply) each 2.00 343.55 687.10 X Y Z
TOTAL 6447.58
Add 1 % Water charges on "W-A" 57.60
TOTAL 6505.18
Add GST on "X-A" (multiplying factor 0.1405) 817.44
TOTAL 7322.63
Add 15% CPOH on "Y-A" 995.33
TOTAL 8317.95
Add Cess @ 1% on "Z-A" 76.31
Cost for 1 dirt box stainer 8394.26
Say 8394.25

18.61.4 200 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no. dirt box stainer
MATERIAL
7425 Dirt box srainer 200 mm each 1.00 7860.00 7860.00
9977 Carriage of dirt box strainer L.S. 52.00 2.12 110.24
9999 Labour for laying dirt box strainer L.S. 104.00 2.12 220.48
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc. AW
18.30.5 (Rate as per item no 20.47.5 of SH : Water Supply) each 2.00 377.00 754.00 X Y Z
TOTAL 8944.72
Add 1 % Water charges on "W-A" 81.91
TOTAL 9026.63
Add GST on "X-A" (multiplying factor 0.1405) 1162.30
TOTAL 10188.93
Add 15% CPOH on "Y-A" 1415.24
TOTAL 11604.17
Add Cess @ 1% on "Z-A" 108.50
Cost for 10 dirt box stainer 11712.67
Say 11712.65
18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic
18.62.1 15 mm nominal bore, 105 mm long, weighing not less than 138 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7495 PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium
Road & H.D. Ball each 1.00 75.00 75.00
9988 Carriage of materials and fixing charges L.S. 21.58 2.12 45.75 W X Y Z
TOTAL 120.75
Add 1 % Water charges on "W" 1.21
TOTAL 121.96
Add GST on "X" (multiplying factor 0.1405) 17.13
TOTAL 139.09
Add 15% CPOH on "Y" 20.86
TOTAL 159.96
Add Cess @ 1% on "Z" 1.60
Cost of one no. 161.56
Say 161.55
18.62.2 20 mm nominal bore, 120 mm long, weighing not less than 198 gms
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7496 PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium
Road & H.D. Ball each 1.00 110.00 110.00
9988 Carriage of materials and fixing charges L.S. 26.91 2.12 57.05
TOTAL 167.05 W X Y Z
Add 1 % Water charges on "W" 1.67
TOTAL 168.72
Add GST on "X" (multiplying factor 0.1405) 23.71
TOTAL 192.42
Add 15% CPOH on "Y" 28.86
TOTAL 221.29
Add Cess @ 1% on "Z" 2.21
Cost of one no. 223.50
Say 223.50

18.62.3 25 mm nominal bore, 152mm long, weighing not less than 440 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7497 PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium
Road & H.D. Ball each 1.00 275.00 275.00
9988 Carriage of materials and fixing charges L.S. 32.24 2.12 68.35
WXY
TOTAL 343.35 Z
Add 1 % Water charges on "W" 3.43
TOTAL 346.78
Add GST on "X" (multiplying factor 0.1405) 48.72
TOTAL 395.51
Add 15% CPOH on "Y" 59.33
TOTAL 454.83
Add Cess @ 1% on "Z" 4.55
Cost of one no. 459.38
Say 459.40

18.62.4 40 mm nominal bore, 206mm long, weighing not less than 690 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7498 PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium
Road & H.D. Ball each 1.00 420.00 420.00
9988 Carriage of materials and fixing charges L.S. 32.24 2.12 68.35
WXY
TOTAL 488.35 Z
Add 1 % Water charges on "W" 4.88
TOTAL 493.23
Add GST on "X" (multiplying factor 0.1405) 69.30
TOTAL 562.53
Add 15% CPOH on "Y" 84.38
TOTAL 646.91
Add Cess @ 1% on "Z" 6.47
Cost of one no. 653.38
Say 653.40

18.62.5 50 mm nominal bore, 242mm long, weighing not less than 1240 gms
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for one no.
MATERIAL
7499 PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium
Road & H.D. Ball each 1.00 820.00 820.00
9988 Carriage of materials and fixing charges L.S. 32.24 2.12 68.35
WXY
TOTAL 888.35 Z
Add 1 % Water charges on "W" 8.88
TOTAL 897.23
Add GST on "X" (multiplying factor 0.1405) 126.06
TOTAL 1023.29
Add 15% CPOH on "Y" 153.49
TOTAL 1176.79
Add Cess @ 1% on "Z" 11.77
Cost of one no. 1188.56
Say 1188.55
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7500 PTMT Angle Stop cock with Flenge 15mm each 1.00 85.00 85.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 102.09 W X Y
Z
Add 1 % Water charges on "W" 1.02
TOTAL 103.11
Add GST on "X" (multiplying factor 0.1405) 14.49
TOTAL 117.59
Add 15% CPOH on "Y" 17.64
TOTAL 135.23
Add Cess @ 1% on "Z" 1.35
Cost of one no. 136.59
Say 136.60

18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7501 PTMT Swiveling shower 15mm each 1.00 65.00 65.00
9988 Carriage of materials and fixing charges L.S. 6.76 2.12 14.33
TOTAL 79.33 W X Y
Z
Add 1 % Water charges on "W" 0.79
TOTAL 80.12
Add GST on "X" (multiplying factor 0.1405) 11.26
TOTAL 91.38
Add 15% CPOH on "Y" 13.71
TOTAL 105.09
Add Cess @ 1% on "Z" 1.05
Cost of one no. 106.14
Say 106.15
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weig
not less than 106 gms.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no
MATERIAL
7509 PTMT Soap Dish/Holder 138x102x75mm each 1.00 58.00 58.00
9988 Carriage of materials and fixing charges L.S. 6.76 2.12 14.33
TOTAL 72.33 W X Y
Z
Add 1 % Water charges on "W" 0.72
TOTAL 73.05
Add GST on "X" (multiplying factor 0.1405) 10.26
TOTAL 83.32
Add 15% CPOH on "Y" 12.50
TOTAL 95.82
Add Cess @ 1% on "Z" 0.96
Cost of one no 96.77
Say 96.75
18.66 Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 :
18.66.1 Up to 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538
suitable for lead jointing upto 300mm dia quintal 1.00 5190.00 5190.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying
AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 5750.57
Add 1 % Water charges on "W-A" 52.05
TOTAL 5802.62
Add GST on "X-A" (multiplying factor 0.1405) 738.55
TOTAL 6541.17
Add 15% CPOH on "Y-A" 899.28
TOTAL 7440.45
Add Cess @ 1% on "Z-A" 68.94
Cost of 1 quintal 7509.39
Say 7509.40
18.66.2 Above 300 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 quintal
MATERIAL
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538
suitable for lead jointing over 300mm dia quintal 1.00 6200.00 6200.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying
AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 6760.57
Add 1 % Water charges on "W-A" 62.15
TOTAL 6822.72
Add GST on "X-A" (multiplying factor 0.1405) 881.88
TOTAL 7704.60
Add 15% CPOH on "Y-A" 1073.79
TOTAL 8778.39
Add Cess @ 1% on "Z-A" 82.32
Cost of 1 quintal 8860.71
Say 8860.70

18.67 Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 :
18.67.1 Up to 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for
mechanical joint as per I.S. 13382 upto 300mm dia quintal 1.00 8571.00 8571.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying AW
XYZ
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00
TOTAL 9131.57
Add 1 % Water charges on "W-A" 85.86
TOTAL 9217.43
Add GST on "X-A" (multiplying factor 0.1405) 1218.34
TOTAL 10435.76
Add 15% CPOH on "Y-A" 1483.46
TOTAL 11919.23
Add Cess @ 1% on "Z-A" 113.73
Cost of 1 quintal 12032.96
Say 12032.95

18.67.2 Above 300 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitabe for
mechanical joint as per IS 13382 over 300mm dia quintal 1.00 9048.00 9048.00

AW
XYZ
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for Laying AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 9608.57
Add 1 % Water charges on "W-A" 90.63
TOTAL 9699.20
Add GST on "X-A" (multiplying factor 0.1405) 1286.02
TOTAL 10985.22
Add 15% CPOH on "Y-A" 1565.88
TOTAL 12551.11
Add Cess @ 1% on "Z-A" 120.05
Cost of 1 quintal 12671.16
Say 12671.15
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
18.68.1 Up to 600 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
7682 Ductile Iron K - 12 specials suitable for push on jointing upto 600
mm dia quintal 1.00 12400.00 12400.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 12960.57
Add 1 % Water charges on "W-A" 124.15
TOTAL 13084.72
Add GST on "X-A" (multiplying factor 0.1405) 1761.69
TOTAL 14846.41
Add 15% CPOH on "Y-A" 2145.06
TOTAL 16991.47
Add Cess @ 1% on "Z-A" 164.45
Cost of 1 quintal 17155.92
Say 17155.90

18.68.2 Above 600 mm dia


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 quintal
MATERIAL
7683 Ductile Iron K - 12 specials suitable for push on jointing over
600mm dia quintal 1.00 17200.00 17200.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying
AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 17760.57
Add 1 % Water charges on "W-A" 172.15
TOTAL 17932.72
Add GST on "X-A" (multiplying factor 0.1405) 2442.83
TOTAL 20375.55
Add 15% CPOH on "Y-A" 2974.43
TOTAL 23349.98
Add Cess @ 1% on "Z-A" 228.04
Cost of 1 quintal 23578.02
Say 23578.00
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :
18.69.1 Up to 600 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 quintal
MATERIAL
7684 Ductile Iron specials suitable for mechanical jointing as per I.S.
9523 -upto 600mm dia quintal 1.00 13050.00 13050.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying
AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X Y Z
TOTAL 13610.57
Add 1 % Water charges on "W-A" 130.65
TOTAL 13741.22
Add GST on "X-A" (multiplying factor 0.1405) 1853.93
TOTAL 15595.15
Add 15% CPOH on "Y-A" 2257.37
TOTAL 17852.52
Add Cess @ 1% on "Z-A" 173.07
Cost of 1 quintal 18025.58
Say 18025.60
18.69.2 Above 600 mm dia
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 quintal
MATERIAL
7685 Ductile Iron Specials suitable for mechancial jointing as per I.S.
9523 over 600mm dia quintal 1.00 18750.00 18750.00
2309 Carriage of Cast iron fittings tonne 0.10 145.72 14.57
Labour for laying AW
18.24 Rate as per Item Number 18.24 of SH: Water Supply quintal 1.00 546.00 546.00 X
YZ
TOTAL 19310.57
Add 1 % Water charges on "W-A" 187.65
TOTAL 19498.22
Add GST on "X-A" (multiplying factor 0.1405) 2662.79
TOTAL 22161.00
Add 15% CPOH on "Y-A" 3242.25
TOTAL 25403.25
Add Cess @ 1% on "Z-A" 248.57
Cost of 1 quintal 25651.83
Say 25651.85
18.70 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :
18.70.1 100 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7666 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm
dia each 50.00 29.00 1450.00
Labour
0116 Fitter (grade 1) day 1.00 784.00 784.00
0117 Assistant Fitter or 2nd class Fitter day 1.00 714.00 714.00 W X Y
0114 Beldar day 1.00 645.00 645.00 Z
TOTAL 3593.00
Add 1 % Water charges on "W" 35.93
TOTAL 3628.93
Add GST on "X" (multiplying factor 0.1405) 509.86
TOTAL 4138.79
Add 15% CPOH on "Y" 620.82
TOTAL 4759.61
Add Cess @ 1% on "Z" 47.60
Cost of 50 joints 4807.21
Cost of 1 joint 96.14
Say 96.15

18.70.2 150 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7668 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm
dia each 50.00 33.00 1650.00
Labour
0116 Fitter (grade 1) day 1.50 784.00 1176.00
0117 Assistant Fitter or 2nd class Fitter day 1.50 714.00 1071.00 W X Y
0114 Beldar day 3.00 645.00 1935.00 Z
TOTAL 5832.00
Add 1 % Water charges on "W" 58.32
TOTAL 5890.32
Add GST on "X" (multiplying factor 0.1405) 827.59
TOTAL 6717.91
Add 15% CPOH on "Y" 1007.69
TOTAL 7725.60
Add Cess @ 1% on "Z" 77.26
Cost of 50 joints 7802.85
Cost of 1 joint 156.06
Say 156.05
18.70.3 200 mm dia pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 50 Joints
MATERIAL
7669 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm

WXYZ
dia each 50.00 60.00 3000.00
LABOUR
0116 Fitter (grade 1) day 2.00 784.00 1568.00
0117 Assistant Fitter or 2nd class Fitter day 2.00 714.00 1428.00 W X Y Z
0114 Beldar day 4.00 645.00 2580.00
TOTAL 8576.00
Add 1 % Water charges on "W" 85.76
TOTAL 8661.76
Add GST on "X" (multiplying factor 0.1405) 1216.98
TOTAL 9878.74
Add 15% CPOH on "Y" 1481.81
TOTAL 11360.55
Add Cess @ 1% on "Z" 113.61
Cost of 50 joints 11474.15
Cost of 1 joint 229.48
Say 229.50

18.70.4 250 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7670 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm
dia each 50.00 70.00 3500.00
LABOUR
0116 Fitter (grade 1) day 2.50 784.00 1960.00
0117 Assistant Fitter or 2nd class Fitter day 2.50 714.00 1785.00 W X Y Z
0114 Beldar day 5.00 645.00 3225.00
TOTAL 10470.00
Add 1 % Water charges on "W" 104.70
TOTAL 10574.70
Add GST on "X" (multiplying factor 0.1405) 1485.75
TOTAL 12060.45
Add 15% CPOH on "Y" 1809.07
TOTAL 13869.51
Add Cess @ 1% on "Z" 138.70
Cost of 50 joints 14008.21
Cost of 1 joint 280.16
Say 280.15

18.70.5 300 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7671 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm
dia each 50.00 100.00 5000.00
LABOUR
0116 Fitter (grade 1) day 3.00 784.00 2352.00
0117 Assistant Fitter or 2nd class Fitter day 3.00 714.00 2142.00
WXYZ
0114 Beldar day 6.00 645.00 3870.00
TOTAL 13364.00
Add 1 % Water charges on "W" 133.64
TOTAL 13497.64
Add GST on "X" (multiplying factor 0.1405) 1896.42
TOTAL 15394.06
Add 15% CPOH on "Y" 2309.11
TOTAL 17703.17
Add Cess @ 1% on "Z" 177.03
Cost of 50 joints 17880.20
Cost of 1 joint 357.60
Say 357.60
18.70.6 350 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7672 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm
dia each 50.00 116.00 5800.00
LABOUR
0116 Fitter (grade 1) day 3.50 784.00 2744.00
0117 Assistant Fitter or 2nd class Fitter day 3.50 714.00 2499.00 W X Y Z
0114 Beldar day 7.00 645.00 4515.00
TOTAL 15558.00
Add 1 % Water charges on "W" 155.58
TOTAL 15713.58
WXYZ

Add GST on "X" (multiplying factor 0.1405) 2207.76


TOTAL 17921.34
Add 15% CPOH on "Y" 2688.20
TOTAL 20609.54
Add Cess @ 1% on "Z" 206.10
Cost of 50 joints 20815.63
Cost of 1 joint 416.31
Say 416.30

18.70.7 400 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7673 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm
dia each 50.00 210.00 10500.00
LABOUR
0116 Fitter (grade 1) day 4.00 784.00 3136.00
0117 Assistant Fitter or 2nd class Fitter day 4.00 714.00 2856.00
0114 Beldar day 8.00 645.00 5160.00
TOTAL 21652.00
Add 1 % Water charges on "W" 216.52
TOTAL 21868.52
Add GST on "X" (multiplying factor 0.1405) 3072.53
TOTAL 24941.05
Add 15% CPOH on "Y" 3741.16 W X Y
TOTAL 28682.20 Z
Add Cess @ 1% on "Z" 286.82
Cost of 50 joints 28969.03
Cost of 1 joint 579.38
Say 579.40

18.70.8 450 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7674 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm
dia each 50.00 250.00 12500.00
LABOUR
0116 Fitter (grade 1) day 4.50 784.00 3528.00
0117 Assistant Fitter or 2nd class Fitter day 4.50 714.00 3213.00
0114 Beldar day 9.00 645.00 5805.00
TOTAL 25046.00
Add 1 % Water charges on "W" 250.46
TOTAL 25296.46
Add GST on "X" (multiplying factor 0.1405) 3554.15
TOTAL 28850.61
Add 15% CPOH on "Y" 4327.59 W X Y
TOTAL 33178.20 Z
Add Cess @ 1% on "Z" 331.78
Cost of 50 joints 33509.99
Cost of 1 joint 670.20
Say 670.20
18.70.9 500 mm dia pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 50 Joints
MATERIAL
7675 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm
dia each 50.00 270.00 13500.00
LABOUR
0116 Fitter (grade 1) day 4.75 784.00 3724.00
0117 Assistant Fitter or 2nd class Fitter day 4.75 714.00 3391.50 W X Y
Z
0114 Beldar day 9.50 645.00 6127.50
TOTAL 26743.00
Add 1 % Water charges on "W" 267.43
TOTAL 27010.43
Add GST on "X" (multiplying factor 0.1405) 3794.97
TOTAL 30805.40
Add 15% CPOH on "Y" 4620.81
TOTAL 35426.20
Add Cess @ 1% on "Z" 354.26
Cost of 50 joints 35780.47
Cost of 1 joint 715.61
Say 715.60

18.70.10 600 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7676 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm
dia each 50.00 356.00 17800.00
LABOUR
0116 Fitter (grade 1) day 6.50 784.00 5096.00
0117 Assistant Fitter or 2nd class Fitter day 6.50 714.00 4641.00
WXYZ
0114 Beldar day 13.00 645.00 8385.00
TOTAL 35922.00
Add 1 % Water charges on "W" 359.22
TOTAL 36281.22
Add GST on "X" (multiplying factor 0.1405) 5097.51
TOTAL 41378.73
Add 15% CPOH on "Y" 6206.81
TOTAL 47585.54
Add Cess @ 1% on "Z" 475.86
Cost of 50 joints 48061.40
Cost of 1 joint 961.23
Say 961.25

18.70.11 700 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7677 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm
dia each 50.00 510.00 25500.00
LABOUR
0116 Fitter (grade 1) day 7.70 784.00 6036.80
0117 Assistant Fitter or 2nd class Fitter day 7.70 714.00 5497.80
WXYZ
0114 Beldar day 15.40 645.00 9933.00
TOTAL 46967.60
Add 1 % Water charges on "W" 469.68
TOTAL 47437.28
Add GST on "X" (multiplying factor 0.1405) 6664.94
TOTAL 54102.21
Add 15% CPOH on "Y" 8115.33
TOTAL 62217.55
Add Cess @ 1% on "Z" 622.18
Cost of 50 joints 62839.72
Cost of 1 joint 1256.79
Say 1256.80
18.70.12 750 mm dia pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 50 Joints
MATERIAL
7678 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm
dia each 50.00 600.00 30000.00
LABOUR
0116 Fitter (grade 1) day 7.70 784.00 6036.80
0117 Assistant Fitter or 2nd class Fitter day 7.70 714.00 5497.80 W X Y
0114 Beldar day 15.40 645.00 9933.00 Z
TOTAL 51467.60
Add 1 % Water charges on "W" 514.68
TOTAL 51982.28
Add GST on "X" (multiplying factor 0.1405) 7303.51
TOTAL 59285.79
Add 15% CPOH on "Y" 8892.87
TOTAL 68178.65
Add Cess @ 1% on "Z" 681.79
Cost of 50 joints 68860.44
Cost of 1 joint 1377.21
Say 1377.20

18.70.13 800 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7679 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm
dia each 50.00 705.00 35250.00
LABOUR

WXY
Z
0116 Fitter (grade 1) day 8.50 784.00 6664.00
0117 Assistant Fitter or 2nd class Fitter day 8.50 714.00 6069.00 W X Y
Z
0114 Beldar day 17.00 645.00 10965.00
TOTAL 58948.00
Add 1 % Water charges on "W" 589.48
TOTAL 59537.48
Add GST on "X" (multiplying factor 0.1405) 8365.02
TOTAL 67902.50
Add 15% CPOH on "Y" 10185.37
TOTAL 78087.87
Add Cess @ 1% on "Z" 780.88
Cost of 50 joints 78868.75
Cost of 1 joint 1577.37
Say 1577.35

18.70.14 900 mm dia pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 50 Joints
MATERIAL
7680 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm
dia each 50.00 910.00 45500.00
LABOUR
0116 Fitter (grade 1) day 10.00 784.00 7840.00
0117 Assistant Fitter or 2nd class Fitter day 10.00 714.00 7140.00 W X Y Z
0114 Beldar day 20.00 645.00 12900.00
TOTAL 73380.00
Add 1 % Water charges on "W" 733.80
TOTAL 74113.80
Add GST on "X" (multiplying factor 0.1405) 10412.99
TOTAL 84526.79
Add 15% CPOH on "Y" 12679.02
TOTAL 97205.81
Add Cess @ 1% on "Z" 972.06
Cost of 50 joints 98177.87
Cost of 1 joint 1963.56
Say 1963.55
18.70.15 1000 mm dia pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 50 Joints
MATERIAL
7681 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm
dia each 50.00 1080.00 54000.00
LABOUR
0116 Fitter (grade 1) day 11.00 784.00 8624.00
0117 Assistant Fitter or 2nd class Fitter day 11.00 714.00 7854.00
WXYZ
0114 Beldar day 22.00 645.00 14190.00
TOTAL 84668.00
Add 1 % Water charges on "W" 846.68
TOTAL 85514.68
Add GST on "X" (multiplying factor 0.1405) 12014.81
TOTAL 97529.49
Add 15% CPOH on "Y" 14629.42
TOTAL 112158.92
Add Cess @ 1% on "Z" 1121.59
Cost of 50 joints 113280.51
Cost of 1 joint 2265.61
Say 2265.60
18.71 Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) :
18.71.1 100 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
100 mm dia. cast iron pipes double flanged = 27.00 Kg
Weight of 5 m pipes 27.00x5 = 135.00 Kg
7712 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 100mm dia metre 5.00 1310.00 6550.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.05 358.32 17.92 A W
Labour for laying X
YZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 1.35 298.50 402.98
TOTAL 6970.89
Add 1 % Water charges on "W-A" 65.68
AW
X
YZ

TOTAL 7036.57
Add GST on "X-A" (multiplying factor 0.1405) 932.02
TOTAL 7968.59
Add 15% CPOH on "Y-A" 1134.84
TOTAL 9103.43
Add Cess @ 1% on "Z-A" 87.00
Cost of 5 metre 9190.44
Cost of metre 1838.09
Say 1838.10

18.71.2 150 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
150 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 44.10 Kg
Weight of 5 m pipes = 44.10x5 = 220.50 Kg
7713 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 150mm dia metre 5.00 2048.00 10240.00
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.05 597.20 29.86 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 2.21 298.50 659.69
TOTAL 10929.55
Add 1 % Water charges on "W-A" 102.70
TOTAL 11032.24
Add GST on "X-A" (multiplying factor 0.1405) 1457.34
TOTAL 12489.59
Add 15% CPOH on "Y-A" 1774.49
TOTAL 14264.07
Add Cess @ 1% on "Z-A" 136.04
Cost of 5 metre 14400.12
Cost per metre 2880.02
Say 2880.00
18.71.3 200 mm dia C.I. Double Flanged Pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
200 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 63.50 Kg
Weight of 5 m pipes 63.50x5 = 317.50 Kg
7714 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 200mm dia metre 5.00 3238.00 16190.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.05 971.45 48.57 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 3.18 298.50 949.23
TOTAL 17187.80
Add 1 % Water charges on "W-A" 162.39
TOTAL 17350.19
Add GST on "X-A" (multiplying factor 0.1405) 2304.33
TOTAL 19654.52
Add 15% CPOH on "Y-A" 2805.79
TOTAL 22460.32
Add Cess @ 1% on "Z-A" 215.11
Cost of 5 metre 22675.43
Cost per metre 4535.09
Say 4535.10

18.71.4 250 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
250 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 85.30 Kg
Weight of 5 m pipes 85.30x5 = 426.50 Kg
7715 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 250mm dia metre 5.00 3905.00 19525.00
AW
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 0.05 1380.48 69.02
X
Labour for laying YZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 4.27 298.50 1274.60
TOTAL 20868.62
Add 1 % Water charges on "W-A" 195.94
TOTAL 21064.56
Add GST on "X-A" (multiplying factor 0.1405) 2780.49
TOTAL 23845.05
YZ

Add 15% CPOH on "Y-A" 3385.57


TOTAL 27230.62
Add Cess @ 1% on "Z-A" 259.56
Cost of 5 metre 27490.18
Cost per metre 5498.04
Say 5498.05

18.71.5 300 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
300 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 110.00 Kg
Weight of 5 m pipes 110.00x5 = 550.00 Kg
7716 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 300mm dia metre 5.00 4990.00 24950.00
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 0.05 1706.30 85.32 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 5.50 298.50 1641.75
TOTAL 26677.07
Add 1 % Water charges on "W-A" 250.35
TOTAL 26927.42
Add GST on "X-A" (multiplying factor 0.1405) 3552.64
TOTAL 30480.05
Add 15% CPOH on "Y-A" 4325.75
TOTAL 34805.80
Add Cess @ 1% on "Z-A" 331.64
Cost of 5 metre 35137.44
Cost per metre 7027.49
Say 7027.50
18.71.6 350 mm dia C.I. Double Flanged Pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
350 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 135.70 Kg
Weight of 5 m pipes 135.70x5 = 678.50 Kg
7717 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 350mm dia metre 5.00 6286.00 31430.00 A W
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 0.05 2388.82 119.44 X Y
Labour for laying Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 6.79 298.50 2026.82
TOTAL 33576.26
Add 1 % Water charges on "W-A" 315.49
TOTAL 33891.75
Add GST on "X-A" (multiplying factor 0.1405) 4477.02
TOTAL 38368.77
Add 15% CPOH on "Y-A" 5451.29
TOTAL 43820.07
Add Cess @ 1% on "Z-A" 417.93
Cost of 5 metre 44238.00
Cost per metre 8847.60
Say 8847.60

18.71.7 400 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
400 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 166.80 Kg
Weight of 5 m pipes 166.80x5 = 834.00 Kg
7718 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 400mm dia metre 5.00 8143.00 40715.00
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 0.05 3257.48 162.87 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 8.34 298.50 2489.49
TOTAL 43367.36
Add 1 % Water charges on "W-A" 408.78
TOTAL 43776.14
Add GST on "X-A" (multiplying factor 0.1405) 5800.77
TOTAL 49576.92
Add 15% CPOH on "Y-A" 7063.11
TOTAL 56640.03
Add Cess @ 1% on "Z-A" 541.51
Cost of 5 metre 57181.54
Cost per metre 11436.31
Say 11436.30

18.71.8 450 mm dia C.I. Double Flanged Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
450 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 201.60 Kg
Weight of 5 m pipes 201.60x5 = 1008.00 Kg
7719 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 450mm dia metre 5.00 10381.00 51905.00
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 0.05 3981.36 199.07 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 10.08 298.50 3008.88
TOTAL 55112.95
Add 1 % Water charges on "W-A" 521.04
TOTAL 55633.99
Add GST on "X-A" (multiplying factor 0.1405) 7393.83
TOTAL 63027.82
Add 15% CPOH on "Y-A" 9002.84
TOTAL 72030.66
Add Cess @ 1% on "Z-A" 690.22
Cost of 5 metre 72720.87
Cost per metre 14544.17
Say 14544.15
18.71.9 500 mm dia C.I. Double Flanged Pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
500 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 234.80 Kg
Weight of 5 m pipes 234.80x5 = 1174.00 Kg
7720 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 500mm dia metre 5.00 12914.00 64570.00
AW
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 0.05 3981.36 199.07
XY
Labour for laying Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 11.74 298.50 3504.39
TOTAL 68273.46
Add 1 % Water charges on "W-A" 647.69
TOTAL 68921.15
Add GST on "X-A" (multiplying factor 0.1405) 9191.05
TOTAL 78112.20
Add 15% CPOH on "Y-A" 11191.17
TOTAL 89303.38
Add Cess @ 1% on "Z-A" 857.99
Cost of 5 metre 90161.37
Cost per metre 18032.27
Say 18032.25

18.71.10 600 mm dia C.I. Double Flanged Pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
600 mm dia. cast iron pipes double flanged
Weight of 1 m pipes = 315.30 Kg
Weight of 5 m pipes 315.30x5 = 1576.50 Kg
7721 Screwed double flanged centrigually cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 600mm dia metre 5.00 17905.00 89525.00
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.05 5972.04 298.60 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 15.77 298.50 4707.35
TOTAL 94530.95
Add 1 % Water charges on "W-A" 898.24
TOTAL 95429.18
Add GST on "X-A" (multiplying factor 0.1405) 12746.42
TOTAL 108175.60
Add 15% CPOH on "Y-A" 15520.24
TOTAL 123695.84
Add Cess @ 1% on "Z-A" 1189.88
Cost of 5 metre 124885.72
Cost per metre 24977.14
Say 24977.15

18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :
18.72.1 100 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
100mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 15.39 Kg
Weight of 10m pipes 15.39x10 = 153.90 Kg
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia
metre 10.00 800.00 8000.00
2343 Carriage of ductile iron pipes (k7) 100 mm dia 100 metre 0.10 358.32 35.83 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 1.54 298.50 459.69
TOTAL 8495.52
Add 1 % Water charges on "W-A" 80.36
TOTAL 8575.88
Add GST on "X-A" (multiplying factor 0.1405) 1140.32
TOTAL 9716.21
Add 15% CPOH on "Y-A" 1388.48
TOTAL 11104.68
Add Cess @ 1% on "Z-A" 106.45
Cost of 10 metre 11211.13
Cost per metre 1121.11
Say 1121.10
18.72.2 150 mm dia Ductile Iron Class K-7 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
150 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 22.750 Kg
Weight of 10m pipes 22.750x10 = 227.50 Kg
7723 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia
metre 10.00 1140.00 11400.00 A W
2344 Carriage of cast iron pipes 150 mm dia 100 metre 0.10 597.20 59.72 X
YZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 2.28 298.50 680.58
TOTAL 12140.30
Add 1 % Water charges on "W-A" 114.60
TOTAL 12254.90
Add GST on "X-A" (multiplying factor 0.1405) 1626.19
TOTAL 13881.09
Add 15% CPOH on "Y-A" 1980.08
TOTAL 15861.17
Add Cess @ 1% on "Z-A" 151.81
Cost of 10 metre 16012.97
Cost per metre 1601.30
Say 1601.30

18.72.3 200 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
200 mm dia. cast iron pipes (in 5.5 m
lengths)
Weight of 1 m pipes = 30.090 Kg
Weight of 10m pipes 30.090x10 = 300.90 Kg
7724 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia
metre 10.00 1400.00 14000.00
2345 Carriage of cast iron pipes 200 mm dia 100 metre 0.10 971.45 97.15
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 3.01 298.50 898.49
TOTAL 14995.63
Add 1 % Water charges on "W-A" 140.97
TOTAL 15136.60
Add GST on "X-A" (multiplying factor 0.1405) 2000.46
TOTAL 17137.06
Add 15% CPOH on "Y-A" 2435.79 A W
TOTAL 19572.84 X Y Z
Add Cess @ 1% on "Z-A" 186.74
Cost of 10 metre 19759.59
Cost per metre 1975.96
Say 1975.95
18.72.4 250 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
250mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 39.310 Kg
Weight of 10m pipes 39.310x10 = 393.10 Kg
7725 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia
metre 10.00 1800.00 18000.00
2346 Carriage of cast iron pipes 250 mm dia 100 metre 0.10 1380.48 138.05 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 3.93 298.50 1173.11
TOTAL 19311.15
Add 1 % Water charges on "W-A" 181.38
TOTAL 19492.53
Add GST on "X-A" (multiplying factor 0.1405) 2573.88
TOTAL 22066.41
Add 15% CPOH on "Y-A" 3134.00
TOTAL 25200.41
Add Cess @ 1% on "Z-A" 240.27
Cost of 10 metre 25440.68
Cost per metre 2544.07
Say 2544.05
18.72.5 300 mm dia Ductile Iron Class K-7 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
300mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 48.400 Kg
Weight of 10m pipes 48.400x10 = 484.00 Kg
7726 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia
metre 10.00 2250.00 22500.00 A W
2347 Carriage of cast iron pipes 300 mm dia 100 metre 0.10 1706.30 170.63 X
Labour for laying YZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 4.84 298.50 1444.74
TOTAL 24115.37
Add 1 % Water charges on "W-A" 226.71
TOTAL 24342.08
Add GST on "X-A" (multiplying factor 0.1405) 3217.08
TOTAL 27559.15
Add 15% CPOH on "Y-A" 3917.16
TOTAL 31476.31
Add Cess @ 1% on "Z-A" 300.32
Cost of 10 metre 31776.63
Cost per metre 3177.66
Say 3177.65

18.72.6 350 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
350mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 66.020 Kg
Weight of 10m pipes 66.020x10 = 660.20 Kg
7727 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia
metre 10.00 2650.00 26500.00
2348 Carriage of cast iron pipes 350 mm dia 100 metre 0.10 2388.82 238.88 A W
Labour for laying XYZ
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 6.60 298.50 1970.10
TOTAL 28708.98
Add 1 % Water charges on "W-A" 267.39
TOTAL 28976.37
Add GST on "X-A" (multiplying factor 0.1405) 3794.38
TOTAL 32770.75
Add 15% CPOH on "Y-A" 4620.10
TOTAL 37390.85
Add Cess @ 1% on "Z-A" 354.21
Cost of 10 metre 37745.06
Cost per metre 3774.51
Say 3774.50

18.72.7 400 mm dia Ductile Iron Class K-7 pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
400mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 78.280 Kg
Weight of 10m pipes 78.280x10 = 782.80 Kg
7728 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia
metre 10.00 3175.00 31750.00
2349 Carriage of cast iron pipes 400 mm dia 100 metre 0.10 3257.48 325.75 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 7.83 298.50 2337.26
TOTAL 34413.00
Add 1 % Water charges on "W-A" 320.76
TOTAL 34733.76
Add GST on "X-A" (multiplying factor 0.1405) 4551.71
TOTAL 39285.47
Add 15% CPOH on "Y-A" 5542.23
TOTAL 44827.70
Add Cess @ 1% on "Z-A" 424.90
Cost of 10 metre 45252.61
Cost per metre 4525.26
Say 4525.25
18.72.8 450 mm dia Ductile Iron Class K-7 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
450mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 91.410 Kg
Weight of 10m pipes 91.410x10 = 914.10 Kg
7729 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia
metre 10.00 3852.00 38520.00
AW
2350 Carriage of cast iron pipes 450 mm dia 100 metre 0.10 3981.36 398.14
XY
Labour for laying Z
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 9.14 298.50 2728.29
TOTAL 41646.43
Add 1 % Water charges on "W-A" 389.18
TOTAL 42035.61
Add GST on "X-A" (multiplying factor 0.1405) 5522.68
TOTAL 47558.29
Add 15% CPOH on "Y-A" 6724.50
TOTAL 54282.78
Add Cess @ 1% on "Z-A" 515.54
Cost of 10 metre 54798.33
Cost per metre 5479.83
Say 5479.85

18.72.9 500 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
500mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 106.640 Kg
Weight of 10m pipes 106.640x10
= 1066.40 Kg
7730 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia
metre 10.00 4350.00 43500.00
2351 Carriage of cast iron pipes 500 mm dia 100 metre 0.10 3981.36 398.14
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 10.66 298.50 3182.01
TOTAL 47080.15
Add 1 % Water charges on "W-A" 438.98
TOTAL 47519.13
Add GST on "X-A" (multiplying factor 0.1405) 6229.36
TOTAL 53748.49
Add 15% CPOH on "Y-A" 7584.97 A W
TOTAL 61333.46 X Y Z
Add Cess @ 1% on "Z-A" 581.51
Cost of 10 metre 61914.98
Cost per metre 6191.50
Say 6191.50

18.72.10 600 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
600mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 138.61 Kg
Weight of 10m pipes 138.61x10 = 1386.10 Kg
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia
metre 10.00 5600.00 56000.00
2352 Carriage of cast iron pipes 600 mm dia 100 metre 0.10 5972.04 597.20 A W
XYZ
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water Supply quintal 13.86 298.50 4137.21
TOTAL 60734.41
Add 1 % Water charges on "W-A" 565.97
TOTAL 61300.39
Add GST on "X-A" (multiplying factor 0.1405) 8031.43
TOTAL 69331.81
Add 15% CPOH on "Y-A" 9779.19
TOTAL 79111.00
Add Cess @ 1% on "Z-A" 749.74
Cost of 10 metre 79860.74
Cost per metre 7986.07
Say 7986.05
18.72.11 700 mm dia Ductile Iron Class K-7 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
700mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 188.92 Kg
Weight of 10m pipes 188.92x10 = 1889.20 Kg
7732 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia
metre 10.00 7300.00 73000.00
2353 Carriage of cast iron pipes 700 mm dia 100 metre 0.10 5972.04 597.20 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 18.89 298.50 5638.67
TOTAL 79235.87
Add 1 % Water charges on "W-A" 735.97
TOTAL 79971.84
Add GST on "X-A" (multiplying factor 0.1405) 10443.81
TOTAL 90415.65
Add 15% CPOH on "Y-A" 12716.55
TOTAL 103132.20
Add Cess @ 1% on "Z-A" 974.94
Cost of 10 metre 104107.14
Cost per metre 10410.71
Say 10410.70

18.72.12 800 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
800mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 243.51 Kg
Weight of 10m pipes 243.51x10 = 2435.10 Kg
7733 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia
metre 10.00 9100.00 91000.00
2355 Carriage of cast iron pipes 800 mm dia 100 metre 0.10 5972.04 597.20 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 24.35 298.50 7268.48
TOTAL 98865.68
Add 1 % Water charges on "W-A" 915.97
TOTAL 99781.65
Add GST on "X-A" (multiplying factor 0.1405) 12998.10
TOTAL 112779.75
Add 15% CPOH on "Y-A" 15826.69
TOTAL 128606.44
Add Cess @ 1% on "Z-A" 1213.38
Cost of 10 metre 129819.82
Cost per metre 12981.98
Say 12982.00

18.72.13 900 mm dia Ductile Iron Class K-7 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
900 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 282.74 Kg
Weight of 10m pipes 282.74x10 = 2827.40 Kg

AW
XYZ
7734 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia
metre 10.00 11800.00 118000.00
2356 Carriage of cast iron pipes 900 mm dia 100 metre 0.10 8958.06 895.81 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 28.27 298.50 8438.60
TOTAL 127334.40
Add 1 % Water charges on "W-A" 1188.96
TOTAL 128523.36
Add GST on "X-A" (multiplying factor 0.1405) 16871.91
TOTAL 145395.27
Add 15% CPOH on "Y-A" 20543.50
TOTAL 165938.77
Add Cess @ 1% on "Z-A" 1575.00
Cost of 10 metre 167513.77
Cost per metre 16751.38
Say 16751.40
18.72.14 1000 mm dia Ductile Iron Class K-7 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1000 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 348.23 Kg
Weight of 10m pipes 348.23x10 = 3482.30 Kg
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm
dia metre 10.00 12300.00 123000.00
2357 Carriage of cast iron pipes 1000 mm dia 100 metre 0.10 11944.08 1194.41 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 34.82 298.50 10393.77
TOTAL 134588.18
Add 1 % Water charges on "W-A" 1241.94
TOTAL 135830.12
Add GST on "X-A" (multiplying factor 0.1405) 17623.81
TOTAL 153453.93
Add 15% CPOH on "Y-A" 21459.02
TOTAL 174912.95
Add Cess @ 1% on "Z-A" 1645.19
Cost of 10 metre 176558.15
Cost per metre 17655.81
Say 17655.80

18.72.15 100 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
100mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 17.76 Kg
Weight of 10m pipes 17.76x10 = 177.60 Kg
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia
metre 10.00 765.00 7650.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.10 358.32 35.83 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 1.776 298.50 530.14
TOTAL 8215.97
Add 1 % Water charges on "W-A" 76.86
TOTAL 8292.83
Add GST on "X-A" (multiplying factor 0.1405) 1090.66
TOTAL 9383.48
Add 15% CPOH on "Y-A" 1328.00
TOTAL 10711.49
Add Cess @ 1% on "Z-A" 101.81
Cost of 10 metre 10813.30
Cost per metre 1081.33
Say 1081.35

18.72.16 150 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
150 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 26.27 Kg
Weight of 10m pipes 26.27x10 = 262.70 Kg
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia
metre 10.00 1150.00 11500.00
AW
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.10 597.20 59.72
X
Labour for laying YZ
AW
X
YZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 2.627 298.50 784.16
TOTAL 12343.88
Add 1 % Water charges on "W-A" 115.60
TOTAL 12459.48
Add GST on "X-A" (multiplying factor 0.1405) 1640.38
TOTAL 14099.86
Add 15% CPOH on "Y-A" 1997.35
TOTAL 16097.21
Add Cess @ 1% on "Z-A" 153.13
Cost of 10 metre 16250.34
Cost per metre 1625.03
Say 1625.05
18.72.17 200 mm dia Ductile Iron Class K-9 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
200 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 36.15 Kg
Weight of 10m pipes 36.15x10 = 361.50 Kg
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia
metre 10.00 1575.00 15750.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.10 971.45 97.15 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 3.615 298.50 1079.08
TOTAL 16926.22
Add 1 % Water charges on "W-A" 158.47
TOTAL 17084.69
Add GST on "X-A" (multiplying factor 0.1405) 2248.79
TOTAL 19333.48
Add 15% CPOH on "Y-A" 2738.16
TOTAL 22071.64
Add Cess @ 1% on "Z-A" 209.93
Cost of 10 metre 22281.57
Cost per metre 2228.16
Say 2228.15

18.72.18 250 mm dia Ductile Iron Class K-9 pipes


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
250mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 48.00 Kg
Weight of 10m pipes 48.00x10 = 480.00 Kg
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm
dia metre 10.00 2200.00 22000.00
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 0.10 1380.48 138.05 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 4.80 298.50 1432.80
TOTAL 23570.85
Add 1 % Water charges on "W-A" 221.38
TOTAL 23792.23
Add GST on "X-A" (multiplying factor 0.1405) 3141.50
TOTAL 26933.73
Add 15% CPOH on "Y-A" 3825.14
TOTAL 30758.87
Add Cess @ 1% on "Z-A" 293.26
Cost of 10 metre 31052.13
Cost per metre 3105.21
Say 3105.20

18.72.19 300 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
300mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 60.490 Kg
Weight of 10m pipes 60.490x10 = 604.90 Kg
7655 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm
dia metre 10.00 2750.00 27500.00
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 0.10 1706.30 170.63 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 6.049 298.50 1805.63
TOTAL 29476.26
Add 1 % Water charges on "W-A" 276.71
TOTAL 29752.96
AW
XYZ

Add GST on "X-A" (multiplying factor 0.1405) 3926.60


TOTAL 33679.56
Add 15% CPOH on "Y-A" 4781.09
TOTAL 38460.65
Add Cess @ 1% on "Z-A" 366.55
Cost of 10 metre 38827.20
Cost per metre 3882.72
Say 3882.70
18.72.20 350 mm dia Ductile Iron Class K-9 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
350mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 79.730 Kg
Weight of 10m pipes 79.730x10 = 797.30 Kg
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm
dia metre 10.00 3350.00 33500.00
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 0.10 2388.82 238.88 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 7.973 298.50 2379.94
TOTAL 36118.82
Add 1 % Water charges on "W-A" 337.39
TOTAL 36456.21
Add GST on "X-A" (multiplying factor 0.1405) 4787.72
TOTAL 41243.93
Add 15% CPOH on "Y-A" 5829.60
TOTAL 47073.53
Add Cess @ 1% on "Z-A" 446.94
Cost of 10 metre 47520.46
Cost per metre 4752.05
Say 4752.05

18.72.21 400 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
400mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 94.800 Kg
Weight of 10m pipes 94.800x10 = 948.00 Kg
7657 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm
dia metre 10.00 4300.00 43000.00
AW
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 0.10 3257.48 325.75
X
Labour for laying YZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 9.48 298.50 2829.78
TOTAL 46155.53
Add 1 % Water charges on "W-A" 433.26
TOTAL 46588.79
Add GST on "X-A" (multiplying factor 0.1405) 6148.14
TOTAL 52736.93
Add 15% CPOH on "Y-A" 7486.07
TOTAL 60223.00
Add Cess @ 1% on "Z-A" 573.93
Cost of 10 metre 60796.93
Cost per metre 6079.69
Say 6079.70

18.72.22 450 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
450mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 110.970 Kg
Weight of 10m pipes 110.970x10 = 1109.70 Kg
7658 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm
dia metre 10.00 5000.00 50000.00
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 0.10 3981.36 398.14 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 11.097 298.50 3312.45
TOTAL 53710.59
Add 1 % Water charges on "W-A" 503.98
TOTAL 54214.57
Add GST on "X-A" (multiplying factor 0.1405) 7151.75
TOTAL 61366.32
Add 15% CPOH on "Y-A" 8708.08
TOTAL 70074.40
Add Cess @ 1% on "Z-A" 667.62
Cost of 10 metre 70742.02
Cost per metre 7074.20
Say 7074.20
18.72.23 500 mm dia Ductile Iron Class K-9 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
500mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 129.480 Kg
Weight of 10m pipes 129.480x10 = 1294.80 Kg
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm
dia metre 10.00 6270.00 62700.00
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 0.10 3981.36 398.14 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 12.948 298.50 3864.98
TOTAL 66963.11
Add 1 % Water charges on "W-A" 630.98
TOTAL 67594.10
Add GST on "X-A" (multiplying factor 0.1405) 8953.94
TOTAL 76548.04
Add 15% CPOH on "Y-A" 10902.46
TOTAL 87450.50
Add Cess @ 1% on "Z-A" 835.86
Cost of 10 metre 88286.35
Cost per metre 8828.64
Say 8828.65

18.72.24 600 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
600mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 168.680 Kg
Weight of 10m pipes 168.680x10 = 1686.80 Kg
7660 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm
dia metre 10.00 7560.00 75600.00
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.10 5972.04 597.20 A W
XYZ
Labour for laying
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 16.868 298.50 5035.10
TOTAL 81232.30
Add 1 % Water charges on "W-A" 761.97
TOTAL 81994.27
Add GST on "X-A" (multiplying factor 0.1405) 10812.76
TOTAL 92807.04
Add 15% CPOH on "Y-A" 13165.79
TOTAL 105972.83
Add Cess @ 1% on "Z-A" 1009.38
Cost of 10 metre 106982.21
Cost per metre 10698.22
Say 10698.20

18.72.25 700 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
700mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 217.540 Kg
Weight of 10m pipes 217.540x10 = 2175.40 Kg
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm
dia metre 10.00 10500.00 105000.00 A W
2330 Carriage of C.I. pipes 500 mm dia 100 metre 0.10 3981.36 398.14 X Y
Labour for laying Z
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 21.754 298.50 6493.57
TOTAL 111891.71
Add 1 % Water charges on "W-A" 1053.98
TOTAL 112945.69
Add GST on "X-A" (multiplying factor 0.1405) 14956.52
TOTAL 127902.21
Add 15% CPOH on "Y-A" 18211.30
TOTAL 146113.50
Add Cess @ 1% on "Z-A" 1396.20
Cost of 10 metre 147509.70
Cost per metre 14750.97
Say 14750.95
18.72.26 750 mm dia Ductile Iron Class K-9 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
750mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 242.600 Kg
Weight of 10m pipes 242.600x10 = 2426.00 Kg
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm
dia metre 10.00 11350.00 113500.00
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 0.10 8958.06 895.81 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 24.26 298.50 7241.61
TOTAL 121637.42
Add 1 % Water charges on "W-A" 1143.96
TOTAL 122781.37
Add GST on "X-A" (multiplying factor 0.1405) 16233.34
TOTAL 139014.71
Add 15% CPOH on "Y-A" 19765.97
TOTAL 158780.68
Add Cess @ 1% on "Z-A" 1515.39
Cost of 10 metre 160296.07
Cost per metre 16029.61
Say 16029.60

18.72.27 800 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
800 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 267.100 Kg
Weight of 10m pipes 267.100x10 = 2671.00 Kg
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm
dia metre 10.00 11450.00 114500.00
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre 0.10 11944.08 1194.41 A W
XYZ
Labour for laying
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 26.71 298.50 7972.94
TOTAL 123667.34
Add 1 % Water charges on "W-A" 1156.94
TOTAL 124824.29
Add GST on "X-A" (multiplying factor 0.1405) 16417.61
TOTAL 141241.90
Add 15% CPOH on "Y-A" 19990.35
TOTAL 161232.25
Add Cess @ 1% on "Z-A" 1532.59
Cost of 10 metre 162764.84
Cost per metre 16276.48
Say 16276.50

18.72.28 900 mm dia Ductile Iron Class K-9 pipes

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
900 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 321.290 Kg
Weight of 10m pipes 321.290x10 = 3212.90 Kg
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm
dia metre 10.00 13900.00 139000.00
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre 0.10 11944.08 1194.41 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 32.129 298.50 9590.51
TOTAL 149784.91
Add 1 % Water charges on "W-A" 1401.94
TOTAL 151186.86
Add GST on "X-A" (multiplying factor 0.1405) 19894.29
TOTAL 171081.15
Add 15% CPOH on "Y-A" 24223.60
TOTAL 195304.74
Add Cess @ 1% on "Z-A" 1857.14
Cost of 10 metre 197161.88
Cost per metre 19716.19
Say 19716.20
18.72.29 1000 mm dia Ductile Iron Class K-9 pipes
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1000 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 380.190 Kg
Weight of 10m pipes 380.190x10 = 3801.90 Kg
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm
dia metre 10.00 15550.00 155500.00
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre 0.10 11944.08 1194.41
Labour for laying
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 38.019 298.50 11348.67
TOTAL 168043.08
Add 1 % Water charges on "W-A" 1566.94
TOTAL 169610.02
Add GST on "X-A" (multiplying factor 0.1405) 22235.72
TOTAL 191845.74 A W
Add 15% CPOH on "Y-A" 27074.56 X
TOTAL 218920.30 Y Z
Add Cess @ 1% on "Z-A" 2075.72
Cost of 10 metre 220996.02
Cost per metre 22099.60
Say 22099.60
18.73 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
18.73.1 100 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
100 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 21.700 Kg
Weight of 5 m pipes 21.700x5 = 108.50 Kg
7686 Ductile Iron Pipe Class K-9 flanges and welding 100mm dia metre 5.00 1100.00 5500.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.05 358.32 17.92 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 1.09 298.50 325.37
TOTAL 5843.28
Add 1 % Water charges on "W-A" 55.18
TOTAL 5898.46
Add GST on "X-A" (multiplying factor 0.1405) 783.02
TOTAL 6681.48
Add 15% CPOH on "Y-A" 953.42
TOTAL 7634.90
Add Cess @ 1% on "Z-A" 73.10
Cost of 5 metre 7707.99
Cost per metre 1541.60
Say 1541.60

18.73.2 150 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
150 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 32.600 Kg
Weight of 5 m pipes 32.600x5 = 163.00 Kg
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 dia metre 5.00 1650.00 8250.00
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.05 597.20 29.86 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 1.63 298.50 486.56
TOTAL 8766.42
Add 1 % Water charges on "W-A" 82.80
TOTAL 8849.21
Add GST on "X-A" (multiplying factor 0.1405) 1174.95
TOTAL 10024.17
Add 15% CPOH on "Y-A" 1430.64
TOTAL 11454.81
Add Cess @ 1% on "Z-A" 109.68
Cost of 5 metre 11564.49
Cost per metre 2312.90
Say 2312.90
18.73.3 200 mm dia Ductile Iron Double Flanged
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
200 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 44.200 Kg
Weight of 5 m pipes 44.200x5 = 221.00 Kg
7688 Ductile Iron Pipe Class K-9 flanges and welding 200mm dia metre 5.00 2075.00 10375.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.05 971.45 48.57 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 2.21 298.50 659.69
TOTAL 11083.26
Add 1 % Water charges on "W-A" 104.24
TOTAL 11187.49
Add GST on "X-A" (multiplying factor 0.1405) 1479.16
TOTAL 12666.65
Add 15% CPOH on "Y-A" 1801.04
TOTAL 14467.70
Add Cess @ 1% on "Z-A" 138.08
Cost of 5 metre 14605.78
Cost per metre 2921.16
Say 2921.15

18.73.4 250 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
250 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 59.400 Kg
Weight of 5 m pipes 59.400x5 = 297.00 Kg
7689 Ductile Iron Pipe Class K-9 flanges and welding 250mm dia metre 5.00 2950.00 14750.00
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 0.05 1380.48 69.02
AW
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 2.97 298.50 886.55
TOTAL 15705.57
Add 1 % Water charges on "W-A" 148.19
TOTAL 15853.76
Add GST on "X-A" (multiplying factor 0.1405) 2102.89
TOTAL 17956.65
Add 15% CPOH on "Y-A" 2560.52
TOTAL 20517.17
Add Cess @ 1% on "Z-A" 196.31
Cost of 5 metre 20713.48
Cost per metre 4142.70
Say 4142.70

18.73.5 300 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
300 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 76.400 Kg
Weight of 5 m pipes 76.400x5 = 382.00 Kg
7690 Ductile Iron Pipe Class K-9 flanges and welding 300mm dia metre 5.00 3790.00 18950.00
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 0.05 1706.30 85.32 A W
Labour for laying XY
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 3.82 298.50 1140.27 Z
TOTAL 20175.59
Add 1 % Water charges on "W-A" 190.35
TOTAL 20365.94
Add GST on "X-A" (multiplying factor 0.1405) 2701.21
TOTAL 23067.14
Add 15% CPOH on "Y-A" 3289.03
TOTAL 26356.18
Add Cess @ 1% on "Z-A" 252.16
Cost of 5 metre 26608.33
Cost per metre 5321.67
Say 5321.65
18.73.6 350 mm dia Ductile Iron Double Flanged
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
350 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 91.400 Kg
Weight of 5 m pipes 91.400x5 = 457.00 Kg
7691 Ductile Iron Pipe Class K-9 flanges and welding 350mm dia metre 5.00 4780.00 23900.00
AW
XY
Z
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 0.05 2388.82 119.44 A W
Labour for laying XY
Z
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 4.57 298.50 1364.15
TOTAL 25383.59
Add 1 % Water charges on "W-A" 240.19
TOTAL 25623.78
Add GST on "X-A" (multiplying factor 0.1405) 3408.48
TOTAL 29032.26
Add 15% CPOH on "Y-A" 4150.22
TOTAL 33182.48
Add Cess @ 1% on "Z-A" 318.18
Cost of 5 metre 33500.66
Cost per metre 6700.13
Say 6700.15

18.73.7 400 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
400 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 108.100 Kg
Weight of 5 m pipes 108.100x5 = 540.50 Kg
7692 Ductile Iron Pipe Class K-9 flanges and welding 400mm dia metre 5.00 6150.00 30750.00
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 0.05 3257.48 162.87 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 5.40 298.50 1611.90
TOTAL 32524.77
Add 1 % Water charges on "W-A" 309.13
TOTAL 32833.90
Add GST on "X-A" (multiplying factor 0.1405) 4386.69
TOTAL 37220.59
Add 15% CPOH on "Y-A" 5341.30
TOTAL 42561.90
Add Cess @ 1% on "Z-A" 409.50
Cost of 5 metre 42971.40
Cost per metre 8594.28
Say 8594.30

18.73.8 450 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
450 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 127.800 Kg
Weight of 5 m pipes 127.800x5 = 639.00 Kg
7693 Ductile Iron Pipe Class K-9 flanges and welding 450mm dia metre 5.00 6453.00 32265.00
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 0.05 3981.36 199.07
AW
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 6.39 298.50 1907.42
TOTAL 34371.48
Add 1 % Water charges on "W-A" 324.64
TOTAL 34696.12
Add GST on "X-A" (multiplying factor 0.1405) 4606.81
TOTAL 39302.94
Add 15% CPOH on "Y-A" 5609.33
TOTAL 44912.27
Add Cess @ 1% on "Z-A" 430.05
Cost of 5 metre 45342.31
Cost per metre 9068.46
Say 9068.45
18.73.9 500 mm dia Ductile Iron Double Flanged
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 5 metre
MATERIAL
500 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 147.900 Kg
Weight of 5 m pipes 147.900x5 = 739.50 Kg
7694 Ductile Iron Pipe Class K-9 flanges and welding 500mm dia metre 5.00 9180.00 45900.00
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 0.05 3981.36 199.07 A W
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 7.40 298.50 2208.90
TOTAL 48307.97
Add 1 % Water charges on "W-A" 460.99
AW
XYZ

TOTAL 48768.96
Add GST on "X-A" (multiplying factor 0.1405) 6541.69
TOTAL 55310.65
Add 15% CPOH on "Y-A" 7965.26
TOTAL 63275.91
Add Cess @ 1% on "Z-A" 610.67
Cost of 5 metre 63886.58
Cost per metre 12777.32
Say 12777.30

18.73.10 600 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
600 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 198.900 Kg
Weight of 5 m pipes 198.900x5 = 994.50 Kg
7695 Ductile Iron Pipe Class K-9 flanges and welding 600mm dia metre 5.00 12150.00 60750.00
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.05 5972.04 298.60
AW
Labour for laying XYZ
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 9.95 298.50 2970.08
TOTAL 64018.68
Add 1 % Water charges on "W-A" 610.49
TOTAL 64629.16
Add GST on "X-A" (multiplying factor 0.1405) 8663.10
TOTAL 73292.26
Add 15% CPOH on "Y-A" 10548.33
TOTAL 83840.59
Add Cess @ 1% on "Z-A" 808.71
Cost of 5 metre 84649.30
Cost per metre 16929.86
Say 16929.85

18.73.11 700 mm dia Ductile Iron Double Flanged

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 5 metre
MATERIAL
700 mm dia. ductile iron pipes double flanged
Weight of 1 m pipes = 254.900 Kg
Weight of 5 m pipes 254.900x5 = 1274.50 Kg
7696 Ductile Iron Pipe Class K-9 flanges and welding 700mm dia metre 5.00 14370.00 71850.00
2330 Carriage of C.I. pipes 500 mm dia 100 metre 0.05 3981.36 199.07 A W
Labour for laying XY
18.23 Rate as per Item Number 18.23 of SH: Water Supply quintal 12.75 298.50 3805.88 Z
TOTAL 75854.94
Add 1 % Water charges on "W-A" 720.49
TOTAL 76575.43
Add GST on "X-A" (multiplying factor 0.1405) 10224.12
TOTAL 86799.56
Add 15% CPOH on "Y-A" 12449.05
TOTAL 99248.61
Add Cess @ 1% on "Z-A" 954.43
Cost of 5 metre 100203.04
Cost per metre 20040.61
Say 20040.60
18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
18.74.1 15 mm nominal bore with 30cm length

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7862 15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts each 1.00 38.00 38.00
9988 Carriage of materials and fixing charges L.S. 12.22 2.12 25.91
TOTAL 63.91 W X Y Z
Add 1 % Water charges on "W" 0.64
TOTAL 64.55
Add GST on "X" (multiplying factor 0.1405) 9.07
TOTAL 73.61
Add 15% CPOH on "Y" 11.04
TOTAL 84.66
Add Cess @ 1% on "Z" 0.85
Cost of one no. 85.50
Say 85.50

18.74.2 15 mm nominal bore with 45 cm length

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7863 15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts each 1.00 52.00 52.00
9988 Carriage of materials and fixing charges L.S. 13.52 2.12 28.66
WXY
TOTAL 80.66 Z
Add 1 % Water charges on "W" 0.81
TOTAL 81.47
Add GST on "X" (multiplying factor 0.1405) 11.45
TOTAL 92.92
Add 15% CPOH on "Y" 13.94
TOTAL 106.85
Add Cess @ 1% on "Z" 1.07
Cost of one no. 107.92
Say 107.90
18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
18.75.1 15 mm nominal bore, weighing not less than 32 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7864 P.T.M.T. extension nipple 15mm each 1.00 25.00 25.00
9988 Carriage of materials and fixing charges L.S. 3.38 2.12 7.17
TOTAL 32.17 W X Y
Z
Add 1 % Water charges on "W" 0.32
TOTAL 32.49
Add GST on "X" (multiplying factor 0.1405) 4.56
TOTAL 37.05
Add 15% CPOH on "Y" 5.56
TOTAL 42.61
Add Cess @ 1% on "Z" 0.43
Cost of one no. 43.04
Say 43.05

18.75.2 20 mm nominal bore, weighing not less than 40 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7865 P.T.M.T. extension nipple 20mm each 1.00 50.00 50.00
9988 Carriage of materials and fixing charges L.S. 3.38 2.12 7.17
TOTAL 57.17 W X Y
Add 1 % Water charges on "W" 0.57 Z
TOTAL 57.74
Add GST on "X" (multiplying factor 0.1405) 8.11
TOTAL 65.85
Add 15% CPOH on "Y" 9.88
TOTAL 75.73
Add Cess @ 1% on "Z" 0.76
Cost of one no. 76.48
Say 76.50
18.75.3 25mm nominal bore, weighing not less than 62 gms

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL
7866 P.T.M.T. extension nipple 25mm each 1.00 68.00 68.00
9988 Carriage of materials and fixing charges L.S. 3.38 2.12 7.17
WXY
TOTAL 75.17
Z
Add 1 % Water charges on "W" 0.75
TOTAL 75.92
Add GST on "X" (multiplying factor 0.1405) 10.67
TOTAL 86.58
Add 15% CPOH on "Y" 12.99
TOTAL 99.57
Add Cess @ 1% on "Z" 1.00
Cost of one no. 100.57
Say 100.55
18.76 Cutting holes up to 30x30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
0123 Mason (brick layer) 1st class day 0.16 784.00 125.44
0124 Mason (brick layer) 2nd class day 0.16 714.00 114.24
0114 Beldar day 1.25 645.00 806.25
Brick work with bricks of class designation 75 in cement mortar
1:4 (1 cement : 4 coarse sand)
10x0.30x0.30x0.344m = 0.309 cum
Less 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
6.4.1 Rate as per item No 6.4.1 of SH :- Brick work. cum 0.21 8512.10 1787.54 A
12 mm cement plaster 1:4 (1 cement : 4 coarse sand) A
10x2x0.3x0.3m = 1.80 sqm WXYZ
Les 33% for pipe etc. = (-) 0.59 sqm
= 1.21 sqm Say 1.20 sqm
13.4.1 (Rate as per item no 13.4.1 of SH : Finishing) sqm 1.20 307.25 368.70
9999 Add for delay L.S. 16.12 2.12 34.17
9999 Sundries L.S. 8.06 2.12 17.09
TOTAL 3253.43
Add 1 % Water charges on "W-A" 10.97
TOTAL 3264.40
Add GST on "X-A" (multiplying factor 0.1405) 155.70
TOTAL 3420.10
Add 15% CPOH on "Y-A" 189.58
TOTAL 3609.68
Add Cess @ 1% on "Z-A" 14.53
Cost of 10 holes 3624.21
Cost of 1 hole 362.42
Say 362.40

18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole
after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing
complete so as to make it leak proof.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 holes
Average size 15x15x15 cm
Labour for cutting holes
0123 Mason (brick layer) 1st class day 0.83 784.00 650.72
0124 Mason (brick layer) 2nd class day 0.83 714.00 592.62
0114 Beldar day 1.67 645.00 1077.15
Cement concrete 1:2:4 (1 cement : 2 coarse sand ; 4 graded
stone aggregate 20 mm nominal size)
10x0.15x0.15x0.15 m = 0.033 cum
Les 33% for pipe etc. = (-) 0.011 cum
= 0.022 cum Say 0.0.02 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete Work cum 0.02 7365.15 147.30
9999 Finishing top and bottom and making the holes leak proof L.S. 121.16 2.12 256.86
9999 Add for delay L.S. 40.30 2.12 85.44
9999 Sundries L.S. 21.58 2.12 45.75
TOTAL 2855.84
Add 1 % Water charges on "W-A" 27.09
TOTAL 2882.92
Add GST on "X-A" (multiplying factor 0.1405) 384.35
TOTAL 3267.28
Add 15% CPOH on "Y-A" 468.00 A
TOTAL 3735.27 W X Y Z
Add Cess @ 1% on "Z-A" 35.88
Cost of 10 holes 3771.15
Cost of 1 hole 377.12
Say 377.10
18.78 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres
Labour for making chases
0123 Mason (brick layer) 1st class day 0.25 784.00 196.00
0124 Mason (brick layer) 2nd class day 0.25 714.00 178.50
0114 Beldar day 1.00 645.00 645.00
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.075x0.075x10 m = 0.05625 cum
Les 33% for pipe etc. = (-) 0.01856 cum
= 0.03769 cum Say 0.04 cum
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.04 8843.45 353.74 A W
TOTAL 1373.24 X Y Z
Add 1 % Water charges on "W-A" 10.20
TOTAL 1383.43
Add GST on "X-A" (multiplying factor 0.1405) 144.67
TOTAL 1528.11
Add 15% CPOH on "Y-A" 176.16
TOTAL 1704.26
Add Cess @ 1% on "Z-A" 13.51
Cost of 10 metre 1717.77
Cost of 1 metre 171.78
Say 171.80

18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse
sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.2x0.2x10 m = 0.40 cum
Les for pipe 3.14x(0.15)²/4x10 = (-) 0.177 cum
= 0.223 cum Say 0.22 cum
4.2.5 Rate as per item no 4.2.5 of SH : Concrete work cum 0.22 8843.45 1945.56
9999 Disposal of malba L.S. 13.52 2.12 28.66
TOTAL 1974.22
Add 1 % Water charges on "W-A" 0.29
TOTAL 1974.51
Add GST on "X-A" (multiplying factor 0.1405) 4.07
TOTAL 1978.58
Add 15% CPOH on "Y-A" 4.95 A W X Y
TOTAL 1983.53 Z
Add Cess @ 1% on "Z-A" 0.38
Cost of 10 metre 1983.91
Cost of 1 metre 198.39
Say 198.40
18.80 Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh w
operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory.
18.80.1 80 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(80/10)²x(100x100)/1000x0.5 gms = 754.28 gms Say
0.008 q
1301 Bleaching powder quintal 0.008 1800.00 14.40
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72 W X Y Z
0114 Beldar day 1.31 645.00 844.95
WXYZ

9999 Sundries including testing of samples L.S. 9.88 2.12 20.95


TOTAL 1139.02
Add 1 % Water charges on "W" 11.39
TOTAL 1150.41
Add GST on "X" (multiplying factor 0.1405) 161.63
TOTAL 1312.04
Add 15% CPOH on "Y" 196.81
TOTAL 1508.84
Add Cess @ 1% on "Z" 15.09
Cost of 100 metre 1523.93
Say 1523.95

18.80.2 100 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(100/10)²x(100x100)/1000x0.5 gms = 1178.57 gms Say
0.012 q
1301 Bleaching powder quintal 0.012 1800.00 21.60
LABOUR
0116 Fitter (grade 1) day 0.49 784.00 384.16 W X Y Z
0114 Beldar day 1.64 645.00 1057.80
9999 Sundries including testing of samples L.S. 13.52 2.12 28.66
TOTAL 1492.22
Add 1 % Water charges on "W" 14.92
TOTAL 1507.14
Add GST on "X" (multiplying factor 0.1405) 211.75
TOTAL 1718.90
Add 15% CPOH on "Y" 257.83
TOTAL 1976.73
Add Cess @ 1% on "Z" 19.77
Cost of 100 metre 1996.50
Say 1996.50
18.80.3 125 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(125/10)²x(100x100)/1000x0.5 gms = 1841.52 gms Say
0.018 q
1301 Bleaching powder quintal 0.018 1800.00 32.40
LABOUR
0116 Fitter (grade 1) day 0.66 784.00 517.44
0114 Beldar day 1.97 645.00 1270.65
9999 Sundries including testing of samples L.S. 17.94 2.12 38.03
TOTAL 1858.52
Add 1 % Water charges on "W" 18.59
TOTAL 1877.11
Add GST on "X" (multiplying factor 0.1405) 263.73
TOTAL 2140.84
Add 15% CPOH on "Y" 321.13 W X Y
TOTAL 2461.97 Z
Add Cess @ 1% on "Z" 24.62
Cost of 100 metre 2486.59
Say 2486.60

18.80.4 150 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(150/10)²x(100x100)/1000x0.5 gms = 2651 gms Say
0.027 q
1301 Bleaching powder quintal 0.027 1800.00 48.60
LABOUR
0116 Fitter (grade 1) day 0.82 784.00 642.88
0114 Beldar day 2.30 645.00 1483.50
9999 Sundries including testing of samples L.S. 22.88 2.12 48.51
TOTAL 2223.49
Add 1 % Water charges on "W" 22.23
TOTAL 2245.72
Add GST on "X" (multiplying factor 0.1405) 315.52
TOTAL 2561.24
WXY
Z
Add 15% CPOH on "Y" 384.19 W X Y
TOTAL 2945.43 Z
Add Cess @ 1% on "Z" 29.45
Cost of 100 metre 2974.89
Say 2974.90

18.80.5 200 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(200/10)²x(100x100)/1000x0.5 gms = 4712.39 gms Say
0.047 q
1301 Bleaching powder quintal 0.047 1800.00 84.60
LABOUR
0116 Fitter (grade 1) day 1.15 784.00 901.60 W X Y Z
0114 Beldar day 2.95 645.00 1902.75
9999 Sundries including testing of samples L.S. 31.46 2.12 66.70
TOTAL 2955.65
Add 1 % Water charges on "W" 29.56
TOTAL 2985.20
Add GST on "X" (multiplying factor 0.1405) 419.42
TOTAL 3404.62
Add 15% CPOH on "Y" 510.69
TOTAL 3915.32
Add Cess @ 1% on "Z" 39.15
Cost of 100 metre 3954.47
Say 3954.45
18.80.6 250 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(250/10)²x(100x100)/1000x0.5 gms = 7363.10 gms Say
0.074 q
1301 Bleaching powder quintal 0.074 1800.00 133.20
LABOUR
0116 Fitter (grade 1) day 1.48 784.00 1160.32 W X Y Z
0114 Beldar day 3.61 645.00 2328.45
9999 Sundries including testing of samples L.S. 40.30 2.12 85.44
TOTAL 3707.41
Add 1 % Water charges on "W" 37.07
TOTAL 3744.48
Add GST on "X" (multiplying factor 0.1405) 526.10
TOTAL 4270.58
Add 15% CPOH on "Y" 640.59
TOTAL 4911.17
Add Cess @ 1% on "Z" 49.11
Cost of 100 metre 4960.28
Say 4960.30

18.80.7 300 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(300/10)²x(100x100)/1000x0.5 gms = 10602.88 gms
Say 0.106 q
1301 Bleaching powder quintal 0.106 1800.00 190.80
LABOUR
0116 Fitter (grade 1) day 1.64 784.00 1285.76
WXYZ
0114 Beldar day 3.94 645.00 2541.30
9999 Sundries including testing of samples L.S. 44.46 2.12 94.26
TOTAL 4112.12
Add 1 % Water charges on "W" 41.12
TOTAL 4153.24
Add GST on "X" (multiplying factor 0.1405) 583.53
TOTAL 4736.77
Add 15% CPOH on "Y" 710.51
TOTAL 5447.28
Add Cess @ 1% on "Z" 54.47
Cost of 100 metre 5501.75
Say 5501.75
18.80.8 350 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(350/10)²x(100x100)/1000x0.5 gms = 14431.70 gms
Say 0.144 q
1301 Bleaching powder quintal 0.144 1800.00 259.20
LABOUR
0116 Fitter (grade 1) day 1.80 784.00 1411.20
0114 Beldar day 4.27 645.00 2754.15
9999 Sundries including testing of samples L.S. 48.36 2.12 102.52
TOTAL 4527.07
Add 1 % Water charges on "W" 45.27
TOTAL 4572.34
Add GST on "X" (multiplying factor 0.1405) 642.41
TOTAL 5214.76
Add 15% CPOH on "Y" 782.21 W X Y
TOTAL 5996.97 Z
Add Cess @ 1% on "Z" 59.97
Cost of 100 metre 6056.94
Say 6056.95
18.80.9 400 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(400/10)²x(100x100)/1000x0.5 gms = 18849.60 gms
Say 0.189 q
1301 Bleaching powder quintal 0.189 1800.00 340.20
LABOUR
0116 Fitter (grade 1) day 1.97 784.00 1544.48
0114 Beldar day 4.59 645.00 2960.55
9999 Sundries including testing of samples L.S. 53.82 2.12 114.10
TOTAL 4959.33
Add 1 % Water charges on "W" 49.59
TOTAL 5008.92
Add GST on "X" (multiplying factor 0.1405) 703.75
TOTAL 5712.68
Add 15% CPOH on "Y" 856.90 W X Y
TOTAL 6569.58 Z
Add Cess @ 1% on "Z" 65.70
Cost of 100 metre 6635.27
Say 6635.25

18.80.10 450 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(450/10)²x(100x100)/1000x0.5 gms = 23856.50 gms
Say 0.239 q
1301 Bleaching powder quintal 0.239 1800.00 430.20
LABOUR
0116 Fitter (grade 1) day 2.13 784.00 1669.92
WXYZ
0114 Beldar day 4.92 645.00 3173.40
9999 Sundries including testing of samples L.S. 58.24 2.12 123.47
TOTAL 5396.99
Add 1 % Water charges on "W" 53.97
TOTAL 5450.96
Add GST on "X" (multiplying factor 0.1405) 765.86
TOTAL 6216.82
Add 15% CPOH on "Y" 932.52
TOTAL 7149.34
Add Cess @ 1% on "Z" 71.49
Cost of 100 metre 7220.83
Say 7220.85

18.80.11 500 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL

WXYZ
Bleaching powder
3x3.14/4x(500/10)²x(100x100)/1000x0.5 gms = 29452.40 gms
Say 0.295 q
1301 Bleaching powder quintal 0.295 1800.00 531.00
LABOUR
0116 Fitter (grade 1) day 2.30 784.00 1803.20 W X Y Z
0114 Beldar day 5.25 645.00 3386.25
9999 Sundries including testing of samples L.S. 63.7 2.12 135.04
TOTAL 5855.49
Add 1 % Water charges on "W" 58.55
TOTAL 5914.05
Add GST on "X" (multiplying factor 0.1405) 830.92
TOTAL 6744.97
Add 15% CPOH on "Y" 1011.75
TOTAL 7756.72
Add Cess @ 1% on "Z" 77.57
Cost of 100 metre 7834.29
Say 7834.30
18.80.12 600 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
Bleaching powder
3x3.14/4x(600/10)²x(100x100)/1000x0.5 gms = 42411.5 gms Say
0.424 q
1301 Bleaching powder quintal 0.424 1800.00 763.20
LABOUR
0116 Fitter (grade 1) day 2.62 784.00 2054.08
WXYZ
0114 Beldar day 5.91 645.00 3811.95
9999 Sundries including testing of samples L.S. 71.37 2.12 151.30
TOTAL 6780.53
Add 1 % Water charges on "W" 67.81
TOTAL 6848.34
Add GST on "X" (multiplying factor 0.1405) 962.19
TOTAL 7810.53
Add 15% CPOH on "Y" 1171.58
TOTAL 8982.11
Add Cess @ 1% on "Z" 89.82
Cost of 100 metre 9071.93
Say 9071.95
18.81 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani
same with fresh water, including getting the samples of water tested in the municipal laboratory :
18.81.1 80 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.003 1800.00 5.40
LABOUR
0116 Fitter (grade 1) day 0.11 784.00 86.24
0114 Beldar day 0.49 645.00 316.05
WXY
9999 Sundries including testing of samples L.S. 4.42 2.12 9.37 Z
TOTAL 417.06
Add 1 % Water charges on "W" 4.17
TOTAL 421.23
Add GST on "X" (multiplying factor 0.1405) 59.18
TOTAL 480.41
Add 15% CPOH on "Y" 72.06
TOTAL 552.48
Add Cess @ 1% on "Z" 5.52
Cost of 100 metre 558.00
Say 558.00

18.81.2 100 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.004 1800.00 7.20
LABOUR
0116 Fitter (grade 1) day 0.16 784.00 125.44
0114 Beldar day 0.57 645.00 367.65 W X Y
9999 Sundries including testing of samples L.S. 4.42 2.12 9.37 Z
WXY
Z
TOTAL 509.66
Add 1 % Water charges on "W" 5.10
TOTAL 514.76
Add GST on "X" (multiplying factor 0.1405) 72.32
TOTAL 587.08
Add 15% CPOH on "Y" 88.06
TOTAL 675.14
Add Cess @ 1% on "Z" 6.75
Cost of 100 metre 681.89
Say 681.90
18.81.3 125 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.006 1800.00 10.80
LABOUR
0116 Fitter (grade 1) day 0.22 784.00 172.48
0114 Beldar day 0.66 645.00 425.70 W X Y
9999 Sundries including testing of samples L.S. 5.46 2.12 11.58 Z
TOTAL 620.56
Add 1 % Water charges on "W" 6.21
TOTAL 626.76
Add GST on "X" (multiplying factor 0.1405) 88.06
TOTAL 714.82
Add 15% CPOH on "Y" 107.22
TOTAL 822.04
Add Cess @ 1% on "Z" 8.22
Cost of 100 metre 830.26
Say 830.25

18.81.4 150 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.009 1800.00 16.20
LABOUR
0116 Fitter (grade 1) day 0.27 784.00 211.68
0114 Beldar day 0.74 645.00 477.30 W X Y
9999 Sundries including testing of samples L.S. 7.15 2.12 15.16 Z
TOTAL 720.34
Add 1 % Water charges on "W" 7.20
TOTAL 727.54
Add GST on "X" (multiplying factor 0.1405) 102.22
TOTAL 829.76
Add 15% CPOH on "Y" 124.46
TOTAL 954.23
Add Cess @ 1% on "Z" 9.54
Cost of 100 metre 963.77
Say 963.75

18.81.5 200 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.016 1800.00 28.80
LABOUR
0116 Fitter (grade 1) day 0.58 784.00 454.72
0114 Beldar day 0.90 645.00 580.50
WXY
9999 Sundries including testing of samples L.S. 9.88 2.12 20.95 Z
TOTAL 1084.97
Add 1 % Water charges on "W" 10.85
TOTAL 1095.82
Add GST on "X" (multiplying factor 0.1405) 153.96
TOTAL 1249.78
Add 15% CPOH on "Y" 187.47
TOTAL 1437.24
Add Cess @ 1% on "Z" 14.37
Cost of 100 metre 1451.62
Say 1451.60
18.81.6 250 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL

WXYZ
1301 Bleaching powder quintal 0.025 1800.00 45.00
LABOUR
0116 Fitter (grade 1) day 0.60 784.00 470.40
0114 Beldar day 1.10 645.00 709.50
9999 Sundries including testing of samples L.S. 10.79 2.12 22.87 W X Y Z
TOTAL 1247.77
Add 1 % Water charges on "W" 12.48
TOTAL 1260.25
Add GST on "X" (multiplying factor 0.1405) 177.07
TOTAL 1437.32
Add 15% CPOH on "Y" 215.60
TOTAL 1652.92
Add Cess @ 1% on "Z" 16.53
Cost of 100 metre 1669.44
Say 1669.45

18.81.7 300 mm diameter C.I. pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.035 1800.00 63.00
LABOUR
0116 Fitter (grade 1) day 0.60 784.00 470.40
0114 Beldar day 1.30 645.00 838.50
9999 Sundries including testing of samples L.S. 13.52 2.12 28.66 W X Y Z
TOTAL 1400.56
Add 1 % Water charges on "W" 14.01
TOTAL 1414.57
Add GST on "X" (multiplying factor 0.1405) 198.75
TOTAL 1613.31
Add 15% CPOH on "Y" 242.00
TOTAL 1855.31
Add Cess @ 1% on "Z" 18.55
Cost of 100 metre 1873.87
Say 1873.85

18.81.8 350 mm diameter C.I. pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.048 1800.00 86.40
LABOUR
0116 Fitter (grade 1) day 0.70 784.00 548.80
0114 Beldar day 1.50 645.00 967.50
9999 Sundries including testing of samples L.S. 16.12 2.12 34.17 W X Y Z
TOTAL 1636.87
Add 1 % Water charges on "W" 16.37
TOTAL 1653.24
Add GST on "X" (multiplying factor 0.1405) 232.28
TOTAL 1885.52
Add 15% CPOH on "Y" 282.83
TOTAL 2168.35
Add Cess @ 1% on "Z" 21.68
Cost of 100 metre 2190.04
Say 2190.05
18.81.9 400 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.063 1800.00 113.40
LABOUR
0116 Fitter (grade 1) day 0.80 784.00 627.20
0114 Beldar day 1.70 645.00 1096.50
9999 Sundries including testing of samples L.S. 17.94 2.12 38.03 W X Y Z
TOTAL 1875.13
Add 1 % Water charges on "W" 18.75
TOTAL 1893.88
Add GST on "X" (multiplying factor 0.1405) 266.09
TOTAL 2159.97
Add 15% CPOH on "Y" 324.00
TOTAL 2483.97
Add Cess @ 1% on "Z" 24.84
Cost of 100 metre 2508.81
Say 2508.80

18.81.10 450 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.08 1800.00 144.00
LABOUR
0116 Fitter (grade 1) day 0.90 784.00 705.60
0114 Beldar day 1.90 645.00 1225.50
9999 Sundries including testing of samples L.S. 20.67 2.12 43.82 W X Y Z
TOTAL 2118.92
Add 1 % Water charges on "W" 21.19
TOTAL 2140.11
Add GST on "X" (multiplying factor 0.1405) 300.69
TOTAL 2440.80
Add 15% CPOH on "Y" 366.12
TOTAL 2806.91
Add Cess @ 1% on "Z" 28.07
Cost of 100 metre 2834.98
Say 2835.00

18.81.11 500 mm diameter C.I. pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.098 1800.00 176.40
LABOUR
0116 Fitter (grade 1) day 1.00 784.00 784.00
0114 Beldar day 2.10 645.00 1354.50
9999 Sundries including testing of samples L.S. 23.27 2.12 49.33 W X Y Z
TOTAL 2364.23
Add 1 % Water charges on "W" 23.64
TOTAL 2387.87
Add GST on "X" (multiplying factor 0.1405) 335.50
TOTAL 2723.37
Add 15% CPOH on "Y" 408.51
TOTAL 3131.88
Add Cess @ 1% on "Z" 31.32
Cost of 100 metre 3163.20
Say 3163.20
18.81.12 600 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
1301 Bleaching powder quintal 0.141 1800.00 253.80
LABOUR
0116 Fitter (grade 1) day 1.20 784.00 940.80
0114 Beldar day 2.50 645.00 1612.50
WXYZ
9999 Sundries including testing of samples L.S. 26.00 2.12 55.12
TOTAL 2862.22
Add 1 % Water charges on "W" 28.62
TOTAL 2890.84
Add GST on "X" (multiplying factor 0.1405) 406.16
TOTAL 3297.01
Add 15% CPOH on "Y" 494.55
TOTAL 3791.56
Add Cess @ 1% on "Z" 37.92
Cost of 100 metre 3829.47
Say 3829.45
18.82 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and
making into blocks, including stacking of pipes at site lead up to 50 metre:
18.82.1 80 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.098)² =(-) 0.30 cum
Total= 16.31 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 16.31 286.85 4678.52
2.25 (Rate as per item No.2.25 of SH Earth work) cum 16.31 253.95 4141.92
Breaking lead caulked joints, blocks and stacking
MATERIAL
AA
0761 Fuel wood quintal 0.373 500.00 186.50 W X Y Z
0771 Kerosene oil litre 0.379 50.00 18.95
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 0.50 714.00 357.00
0114 Beldar day 4.00 645.00 2580.00
9988 Sundries and carriage L.S. 53.82 2.12 114.10
TOTAL 12077.00
Add 1 % Water charges on "W-A" 32.57
TOTAL 12109.56
Add GST on "X-A" (multiplying factor 0.1405) 462.12
TOTAL 12571.68
Add 15% CPOH on "Y-A" 562.69
TOTAL 13134.37
Add Cess @ 1% on "Z-A" 43.14
Cost of 40.26 metre 13177.51
Cost of one metre 327.31
Say 327.30
18.82.2 100 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.118)² =(-) 0.44 cum
Total= 16.17 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 16.17 286.85 4638.36
2.25 (Rate as per item No.2.25 of SH Earth work) cum 16.17 253.95 4106.37
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 0.466 500.00 233.00 A A
WXYZ
0771 Kerosene oil litre 0.379 50.00 18.95
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 0.63 714.00 449.82
0114 Beldar day 4.50 645.00 2902.50
9988 Sundries and carriage L.S. 53.82 2.12 114.10
TOTAL 12463.10
Add 1 % Water charges on "W-A" 37.18
TOTAL 12500.29
Add GST on "X-A" (multiplying factor 0.1405) 527.66
TOTAL 13027.94
Add 15% CPOH on "Y-A" 642.48
TOTAL 13670.42
Add Cess @ 1% on "Z-A" 49.26
Cost of 40.26 metre 13719.68
Cost of one metre 340.78
Say 340.80

18.82.3 125 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.144)² =(-) 0.65 cum
Total= 15.96 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 15.96 286.85 4578.13
2.25 (Rate as per item No.2.25 of SH Earth work) cum 15.96 253.95 4053.04
Breaking lead caulked joints, blocks and stacking
MATERIAL
AA
0761 Fuel wood quintal 0.559 500.00 279.50
WXYZ
AA
WXYZ
0771 Kerosene oil litre 0.568 50.00 28.40
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 0.75 714.00 535.50
0114 Beldar day 5.00 645.00 3225.00
9988 Sundries and carriage L.S. 53.82 2.12 114.10
TOTAL 12813.67
Add 1 % Water charges on "W-A" 41.82
TOTAL 12855.49
Add GST on "X-A" (multiplying factor 0.1405) 593.52
TOTAL 13449.01
Add 15% CPOH on "Y-A" 722.68
TOTAL 14171.68
Add Cess @ 1% on "Z-A" 55.41
Cost of 40.26 metre 14227.09
Cost of one metre 353.38
Say 353.40
18.82.4 150 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs. AA
Details of cost for 40.26 m or 11 nos. joints. WXY
Earth work in excavation for dismantling pipes including refilling Z
of excavated earth
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.17)² =(-) 0.91 cum
Total= 15.70 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 15.70 286.85 4503.55
2.25 (Rate as per item No.2.25 of SH Earth work) cum 15.70 253.95 3987.02
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 0.653 500.00 326.50
0771 Kerosene oil litre 0.568 50.00 28.40
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 0.88 714.00 628.32
0114 Beldar day 5.50 645.00 3547.50
9988 Sundries and carriage L.S. 67.21 2.12 142.49
TOTAL 13163.77
Add 1 % Water charges on "W-A" 46.73
TOTAL 13210.50
Add GST on "X-A" (multiplying factor 0.1405) 663.15
TOTAL 13873.65
Add 15% CPOH on "Y-A" 807.46
TOTAL 14681.11
Add Cess @ 1% on "Z-A" 61.91
Cost of 40.26 metre 14743.02
Cost of one metre 366.20
Say 366.20

18.82.5 200 mm diameter C.I. pipe

AA
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x60x0.75 m=18.12 cum
Deduct for pipe 1x40.26x3.14/4x(0.222)² =(-) 1.56 cum
Total= 16.56 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 16.56 286.85 4750.24
2.25 (Rate as per item No.2.25 of SH Earth work) cum 16.56 253.95 4205.41
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 0.84 500.00 420.00
0771 Kerosene oil litre 0.7576 50.00 37.88
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 1.10 714.00 785.40
0114 Beldar day 6.50 645.00 4192.50
9988 Sundries and carriage L.S. 67.21 2.12 142.49
TOTAL 14533.91
Add 1 % Water charges on "W-A" 55.78
TOTAL 14589.70
Add GST on "X-A" (multiplying factor 0.1405) 791.58
TOTAL 15381.28
Add 15% CPOH on "Y-A" 963.84
TOTAL 16345.12
Add Cess @ 1% on "Z-A" 73.89
Cost of 40.26 metre 16419.02
Cost of one metre 407.82
Say 407.80
18.82.6 250 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x.65x0.75 m=19.63 cum
Deduct for pipe 1x40.26x3.14/4x(0.274)² =(-) 2.37 cum
Total= 17.26 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 17.26 286.85 4951.03
2.25 (Rate as per item No.2.25 of SH Earth work) cum 17.26 253.95 4383.18 A A
Breaking lead caulked joints, blocks and stacking
MATERIAL

0761 Fuel wood quintal 1.026 500.00 513.00


0771 Kerosene oil litre 1.1365 50.00 56.83
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 1.30 714.00 928.20
0114 Beldar day 7.50 645.00 4837.50
9988 Sundries and carriage L.S. 80.73 2.12 171.15
TOTAL 15840.88
Add 1 % Water charges on "W-A" 65.07
TOTAL 15905.95
Add GST on "X-A" (multiplying factor 0.1405) 923.33
TOTAL 16829.28
Add 15% CPOH on "Y-A" 1124.26
TOTAL 17953.54 W X Y Z
Add Cess @ 1% on "Z-A" 86.19
Cost of 40.26 metre 18039.73
Cost of one metre 448.08
Say 448.10
18.82.7 300 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs. AA
Details of cost for 40.26 m or 11 nos. joints. WXYZ
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x.70x0.75 m=21.14 cum
Deduct for pipe 1x40.26x3.14/4x(0.326)² =(-) 3.36 cum
Total= 17.79 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 17.79 286.85 5103.06
2.25 (Rate as per item No.2.25 of SH Earth work) cum 17.79 253.95 4517.77
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 1.12 500.00 560.00
0771 Kerosene oil litre 1.515 50.00 75.75
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 1.50 714.00 1071.00
0114 Beldar day 8.50 645.00 5482.50
9988 Sundries and carriage L.S. 94.12 2.12 199.53
TOTAL 17009.62
Add 1 % Water charges on "W-A" 73.89
TOTAL 17083.50
Add GST on "X-A" (multiplying factor 0.1405) 1048.51
TOTAL 18132.01
Add 15% CPOH on "Y-A" 1276.68
TOTAL 19408.69
Add Cess @ 1% on "Z-A" 97.88
Cost of 40.26 metre 19506.56
Cost of one metre 484.51
Say 484.50

18.82.8 350 mm diameter C.I. pipe

AA
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x.75x0.75 m=22.65 cum
Deduct for pipe 1x40.26x3.14/4x(0.378)² =(-) 4.51 cum
AA
WXYZ

Total= 18.14 cum


2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 18.14 286.85 5203.46
2.25 (Rate as per item No.2.25 of SH Earth work) cum 18.14 253.95 4606.65
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 1.213 500.00 606.50
0771 Kerosene oil litre 1.515 50.00 75.75
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 1.75 714.00 1249.50
0114 Beldar day 9.50 645.00 6127.50
9988 Sundries and carriage L.S. 107.64 2.12 228.20
TOTAL 18097.56
Add 1 % Water charges on "W-A" 82.87
TOTAL 18180.43
Add GST on "X-A" (multiplying factor 0.1405) 1176.03
TOTAL 19356.46
Add 15% CPOH on "Y-A" 1431.95
TOTAL 20788.42
Add Cess @ 1% on "Z-A" 109.78
Cost of 40.26 metre 20898.20
Cost of one metre 519.08
Say 519.10
18.82.9 400 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs. AA
Details of cost for 40.26 m or 11 nos. joints. WXY
Earth work in excavation for dismantling pipes including refilling Z
of excavated earth
1x40.26x.80x0.75 m=24.16 cum
Deduct for pipe 1x40.26x3.14/4x(0.429)² =(-) 5.93 cum
Total= 18.23 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 18.23 286.85 5229.28
2.25 (Rate as per item No.2.25 of SH Earth work) cum 18.23 253.95 4629.51
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 1.306 500.00 653.00
0771 Kerosene oil litre 1.894 50.00 94.70
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 2.00 714.00 1428.00
0114 Beldar day 10.50 645.00 6772.50
9988 Sundries and carriage L.S. 121.03 2.12 256.58
TOTAL 19063.57
Add 1 % Water charges on "W-A" 92.05
TOTAL 19155.62
Add GST on "X-A" (multiplying factor 0.1405) 1306.20
TOTAL 20461.82
Add 15% CPOH on "Y-A" 1590.46
TOTAL 22052.28
Add Cess @ 1% on "Z-A" 121.93
Cost of 40.26 metre 22174.21
Cost of one metre 550.78
Say 550.80
18.82.10 450 mm diameter C.I. pipe
AA
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling
of excavated earth
1x40.26x.85x0.75 m=25.67 cum
Deduct for pipe 1x40.26x3.14/4x(0.48)² =(-) 7.29 cum
Total= 18.38 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) cum 18.38 286.85 5272.30
2.25 (Rate as per item No.2.25 of SH Earth work) cum 18.38 253.95 4667.60
Breaking lead caulked joints, blocks and stacking
MATERIAL
0761 Fuel wood quintal 1.40 500.00 700.00
0771 Kerosene oil litre 2.273 50.00 113.65
LABOUR
0117 Assistant Fitter or 2nd class Fitter day 2.25 714.00 1606.50
0114 Beldar day 11.50 645.00 7417.50
9988 Sundries and carriage L.S. 134.55 2.12 285.25
TOTAL 20062.80
Add 1 % Water charges on "W-A" 101.23
TOTAL 20164.03
Add GST on "X-A" (multiplying factor 0.1405) 1436.49
TOTAL 21600.52
Add 15% CPOH on "Y-A" 1749.09
TOTAL 23349.61
Add Cess @ 1% on "Z-A" 134.10
Cost of 40.26 metre 23483.71
Cost of one metre 583.30
Say 583.30

18.82.11 500 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavation for dismantling pipes including refilling of
excavated earth
1x40.26x.90x0.75 m=27.18 cum
Deduct for pipe 1x40.26x3.14/4x(0.532)² =(-) 8.94 cum Total= 18.24 cum
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) (Rate as per item No.2.25 18.24 286.85 5232.14
2.25 of SH Earth work) Breaking lead caulked joints, blocks and stacking 18.24 253.95 4632.05
MATERIAL cum cum
0761 1.492 500.00 746.00 AA
Fuel wood Kerosene oil LABOUR quintal litre
0771 2.652 50.00 132.60
Assistant Fitter or 2nd class Fitter day day
0117 2.50 714.00 1785.00
0114 Beldar 12.50 645.00 8062.50

9988 Sundries and carriage TOTAL L.S. 147.94 2.12 313.63 W X Y


Add 1 % Water charges on "W-A" TOTAL 20903.92 Z
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 110.40
Add 15% CPOH on "Y-A" TOTAL 21014.32
Add Cess @ 1% on "Z-A" Cost of 40.26 metre 1566.59
Cost of one metre 22580.92
Say 1907.51
24488.42
146.24
24634.67
611.89
611.90

18.82.12 600 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs. AA


2.8.1 Details of cost for 40.26 m or 11 nos. joints. cum cum 17.44 286.85 5002.66 WXYZ
2.25 Earth work in excavation for dismantling pipes including refilling of quintal litre 17.44 253.95 4428.89
0761 excavated earth day day 1.68 500.00 840.00
0771 1x40.26x1.00x0.75 m=30.20 cum L.S. 3.41 50.00 170.50
0117 Deduct for pipe 1x40.26x3.14/4x(0.635)² =(-) 12.76 cum Total= 17.44 3.00 714.00 2142.00
0114 cum 14.50 645.00 9352.50
9988 (Rate as per item no. 2.8.1 of SH: Earth work) (Rate as per item No.2.25 174.85 2.12 370.68
of SH Earth work) Breaking lead caulked joints, blocks and stacking 22307.23
MATERIAL 128.76
Fuel wood Kerosene oil LABOUR 22435.99
Assistant Fitter or 2nd class Fitter Beldar 1827.12
Sundries and carriage TOTAL 24263.11
Add 1 % Water charges on "W-A" TOTAL 2224.73
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 26487.85
Add 15% CPOH on "Y-A" TOTAL 170.56
Add Cess @ 1% on "Z-A" Cost of 40.26 metre 26658.41
Cost of one metre 662.16
Say 662.15

18.83 Labour for cutting C.I. pipe with steel saw.


18.83.1 80 mm diameter C.I. pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
0116 Detail of cost for one cut. LABOUR day day L.S. 0.06 784.00 47.04
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.06 645.00 38.70
9999 Add 1 % Water charges on "W" TOTAL 1.82 2.12 3.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 89.60
Add 15% CPOH on "Y" TOTAL 0.90
Add Cess @ 1% on "Z" Cost of each cut 90.49
Say 12.71 W X Y Z
103.21
15.48
118.69
1.19
119.88
119.90

18.83.2 100 mm diameter C.I. pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
0116 Detail of cost for one cut. LABOUR day day L.S. 0.08 784.00 62.72
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.08 645.00 51.60
9999 Add 1 % Water charges on "W" TOTAL 2.73 2.12 5.79
Add GST on "X" (multiplying factor 0.1405) TOTAL 120.11
Add 15% CPOH on "Y" TOTAL 1.20
Add Cess @ 1% on "Z" Cost of each cut 121.31
Say 17.04 W X Y Z
138.35
20.75
159.11
1.59
160.70
160.70

18.83.3 125 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for one cut. LABOUR day day L.S. 0.11 784.00 86.24
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.11 645.00 70.95
9999 Add 1 % Water charges on "W" TOTAL 4.42 2.12 9.37
Add GST on "X" (multiplying factor 0.1405) TOTAL 166.56
Add 15% CPOH on "Y" TOTAL 1.67
Add Cess @ 1% on "Z" Cost of each cut 168.23 W X Y Z
Say 23.64
191.86
28.78
220.64
2.21
222.85
222.85

18.83.4 150 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


0116 Detail of cost for one cut. LABOUR day day L.S. 0.15 784.00 117.60
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.15 645.00 96.75
9999 Add 1 % Water charges on "W" TOTAL 5.33 2.12 11.30
Add GST on "X" (multiplying factor 0.1405) TOTAL 225.65
Add 15% CPOH on "Y" TOTAL 2.26
Add Cess @ 1% on "Z" Cost of each cut 227.91
WXYZ
Say 32.02
259.93
38.99
298.92
2.99
301.91
301.90

18.83.5 200 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.

WXYZ
0116 Detail of cost for one cut. LABOUR day day L.S. 0.20 784.00 156.80
0114 Fitter (grade 1) Beldar Sundries TOTAL 0.20 645.00 129.00
9999 Add 1 % Water charges on "W" TOTAL 7.15 2.12 15.16
Add GST on "X" (multiplying factor 0.1405) TOTAL 300.96
Add 15% CPOH on "Y" TOTAL 3.01
Add Cess @ 1% on "Z" Cost of each cut 303.97
Say 42.71 W X Y Z
346.68
52.00
398.68
3.99
402.66
402.65

18.83.6 250 mm diameter C.I. pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.25 784.00 196.00
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 8.06 2.12 17.09 W
TOTAL 374.34 X Y Z
Add 1 % Water charges on "W" 3.74
TOTAL 378.08
Add GST on "X" (multiplying factor 0.1405) 53.12
TOTAL 431.20
Add 15% CPOH on "Y" 64.68
TOTAL 495.88
Add Cess @ 1% on "Z" 4.96
Cost of each cut 500.84
Say 500.85

18.83.7 300 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.30 784.00 235.20
0114 Beldar day 0.30 645.00 193.50
9999 Sundries L.S. 9.88 2.12 20.95
TOTAL 449.65 W X Y Z
Add 1 % Water charges on "W" 4.50
TOTAL 454.14
Add GST on "X" (multiplying factor 0.1405) 63.81
TOTAL 517.95
Add 15% CPOH on "Y" 77.69
TOTAL 595.64
Add Cess @ 1% on "Z" 5.96
Cost of each cut 601.60
Say 601.60

18.83.8 350 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.35 784.00 274.40
0114 Beldar day 0.35 645.00 225.75
9999 Sundries L.S. 10.79 2.12 22.87
TOTAL 523.02 W X Y Z
Add 1 % Water charges on "W" 5.23
TOTAL 528.26
Add GST on "X" (multiplying factor 0.1405) 74.22
TOTAL 602.47
Add 15% CPOH on "Y" 90.37
TOTAL 692.85
Add Cess @ 1% on "Z" 6.93
Cost of each cut 699.77
Say 699.75

18.83.9 400 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one cut.
LABOUR

WXYZ
0116 Fitter (grade 1) day 0.40 784.00 313.60
0114 Beldar day 0.40 645.00 258.00
9999 Sundries L.S. 12.48 2.12 26.46
TOTAL 598.06 W X Y Z
Add 1 % Water charges on "W" 5.98
TOTAL 604.04
Add GST on "X" (multiplying factor 0.1405) 84.87
TOTAL 688.91
Add 15% CPOH on "Y" 103.34
TOTAL 792.24
Add Cess @ 1% on "Z" 7.92
Cost of each cut 800.16
Say 800.15
18.83.10 450 mm diameter C.I. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.45 784.00 352.80
0114 Beldar day 0.45 645.00 290.25
9999 Sundries L.S. 13.52 2.12 28.66
WXY
TOTAL 671.71 Z
Add 1 % Water charges on "W" 6.72
TOTAL 678.43
Add GST on "X" (multiplying factor 0.1405) 95.32
TOTAL 773.75
Add 15% CPOH on "Y" 116.06
TOTAL 889.81
Add Cess @ 1% on "Z" 8.90
Cost of each cut 898.71
Say 898.70
18.83.11 500 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.50 784.00 392.00
0114 Beldar day 0.50 645.00 322.50
9999 Sundries L.S. 15.21 2.12 32.25 W X Y
TOTAL 746.75 Z
Add 1 % Water charges on "W" 7.47
TOTAL 754.21
Add GST on "X" (multiplying factor 0.1405) 105.97
TOTAL 860.18
Add 15% CPOH on "Y" 129.03
TOTAL 989.21
Add Cess @ 1% on "Z" 9.89
Cost of each cut 999.10
Say 999.10

18.83.12 600 mm diameter C.I. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one cut.
LABOUR
0116 Fitter (grade 1) day 0.60 784.00 470.40
0114 Beldar day 0.60 645.00 387.00
9999 Sundries L.S. 16.12 2.12 34.17 W X Y
TOTAL 891.57 Z
Add 1 % Water charges on "W" 8.92
TOTAL 900.49
Add GST on "X" (multiplying factor 0.1405) 126.52
TOTAL 1027.01
Add 15% CPOH on "Y" 154.05
TOTAL 1181.06
Add Cess @ 1% on "Z" 11.81
Cost of each cut 1192.87
Say 1192.85
18.84 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.
18.84.1 15 mm nominal bore

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one no.
MATERIAL

WXY
Z
3327 15 mm Battery Based Sensor Pillar Cock each 1.00 6000.00 6000.00
9988 Carriage of materials and fixing charges L.S. 8.06 2.12 17.09
TOTAL 6017.09 W X Y
Add 1 % Water charges on "W" 60.17 Z
TOTAL 6077.26
Add GST on "X" (multiplying factor 0.1405) 853.85
TOTAL 6931.11
Add 15% CPOH on "Y" 1039.67
TOTAL 7970.78
Add Cess @ 1% on "Z" 79.71
Cost of one no. 8050.49
Say 8050.50
18.85 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be p
separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per directi
Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment)
Inernal work - Exposed on wall
18.85.1 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. P


Details of cost for 10 metre WXY
MATERIAL Z
8779 SS pipe 304 grades with press fit technology as per JIS 3448
standard 15.88 mm outer dia metre 10.00 140.00 1400.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00301 145.72 0.44
Add 3% for pipe inserted into fitting and wastage etc. on P 42.00
3xP / 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
Add 2% for special T&P and sundries etc. on P 28.00
2 xP / 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 2631.89
Add 1 % Water charges on "W" 26.32
TOTAL 2658.21
Add GST on "X" (multiplying factor 0.1405) 373.48
TOTAL 3031.68
Add 15% CPOH on "Y" 454.75
TOTAL 3486.44
Add Cess @ 1% on "Z" 34.86
Cost of 10 metre 3521.30
Cost of 1 metre 352.13
Say 352.15

18.85.2 22.22 mm outer dia Pipe

P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
8780 SS pipe 304 grades with press fit technology as per JIS 3448
standard 22.22 mm outer dia metre 10.00 250.00 2500.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00529 145.72 0.77
Add 3% for pipe inserted into fitting and wastage etc. on P 75.00
3 xP/ 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
Add 2% for special T&P and sundries etc. on P 50.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 3787.22
Add 1 % Water charges on "W" 37.87
TOTAL 3825.09
Add GST on "X" (multiplying factor 0.1405) 537.43
TOTAL 4362.52
Add 15% CPOH on "Y" 654.38
TOTAL 5016.89
Add Cess @ 1% on "Z" 50.17
Cost of 10 metre 5067.06
Cost of 1 metre 506.71
Say 506.70
18.85.3 28.58 mm outer dia Pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 10 metre
MATERIAL
8781 SS pipe 304 grades with press fit technology as per JIS 3448
standard 28.58 mm outer dia metre 10.00 310.00 3100.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00687 145.72 1.00
Add 3% for pipe inserted into fitting and wastage etc. on P 93.00
3xP/ 100
9999 Cement, sand and grit L.S. 4.16 2.12 8.82
Add 2% for special T&P and sundries etc. on P 62.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4420.48
Add 1 % Water charges on "W" 44.20
TOTAL 4464.69
Add GST on "X" (multiplying factor 0.1405) 627.29
TOTAL 5091.97
Add 15% CPOH on "Y" 763.80
TOTAL 5855.77
Add Cess @ 1% on "Z" 58.56
Cost of 10 metre 5914.33
Cost of 1 metre 591.43
Say 591.45

18.85.4 34.00 mm outer dia Pipe


P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 10 metre
MATERIAL
8782 SS pipe 304 grades with press fit technology as per JIS 3448
standard 34.00 mm outer dia metre 10.00 439.50 4395.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.0098 145.72 1.43
Add 3% for pipe inserted into fitting and wastage etc. on P 131.85
3xP/ 100
9999 Cement, sand and grit L.S. 4.16 2.12 8.82
Add 2% for special T&P and sundries etc. on P 87.90
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 5780.66
Add 1 % Water charges on "W" 57.81
TOTAL 5838.46
Add GST on "X" (multiplying factor 0.1405) 820.30
TOTAL 6658.77
Add 15% CPOH on "Y" 998.82
TOTAL 7657.58
Add Cess @ 1% on "Z" 76.58
Cost of 10 metre 7734.16
Cost of 1 metre 773.42
Say 773.40
18.85.5 42.70 mm outer dia Pipe
Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXYZ
MATERIAL
8783 SS pipe 304 grades with press fit technology as per JIS 3448
standard 42.70 mm outer dia metre 10.00 450.00 4500.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.0124 145.72 1.81
Add 3% for pipe inserted into fitting and wastage etc. on P 135.00
3xP/ 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
Add 2% for special T&P and sundries etc. on P 90.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 5893.77
Add 1 % Water charges on "W" 58.94
TOTAL 5952.70
Add GST on "X" (multiplying factor 0.1405) 836.35
TOTAL 6789.06
Add 15% CPOH on "Y" 1018.36
TOTAL 7807.42
Add Cess @ 1% on "Z" 78.07
Cost of 10 metre 7885.49
Cost of 1 metre 788.55
Say 788.55

18.85.6 48.60 mm outer dia Pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
8701 SS pipe 304 grades with press fit technology as per JIS 3448
standard 48.60 mm outer dia metre 10.00 620.00 6200.00 P
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.0142 145.72 2.07 W X Y
Add 3% for pipe inserted into fitting and wastage etc. on P 186.00 Z
3xP/ 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
Add 2% for special T&P and sundries etc. on P 124.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 7679.03
Add 1 % Water charges on "W" 76.79
TOTAL 7755.82
Add GST on "X" (multiplying factor 0.1405) 1089.69
TOTAL 8845.51
Add 15% CPOH on "Y" 1326.83
TOTAL 10172.34
Add Cess @ 1% on "Z" 101.72
Cost of 10 metre 10274.06
Cost of 1 metre 1027.41
Say 1027.40
18.85A Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with pres
type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including test
joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment)
Inernal work - Exposed on wall

18.85A.1 15 mm outer dia pipe


P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y
Details of cost for 10 metre Z
MATERIAL
3862 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 15 mm outer dia
metre 10.00 310.00 3100.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.003472 145.72 0.51
Add 3% for pipe inserted into fitting and wastage etc. on P 93.00
3xP / 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
Add 2% for special T&P and sundries etc. on P 62.00
2 xP / 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 4416.95
Add 1 % Water charges on "W" 44.17
TOTAL 4461.12
Add GST on "X" (multiplying factor 0.1405) 626.79
TOTAL 5087.91
Add 15% CPOH on "Y" 763.19
TOTAL 5851.10
Add Cess @ 1% on "Z" 58.51
Cost of 10 metre 5909.61
Cost of 1 metre 590.96
Say 590.95

18.85A.2 22 mm outer dia Pipe


P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 10 metre
MATERIAL
3863 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 22 mm outer dia
metre 10.00 500.00 5000.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00619 145.72 0.90
Add 3% for pipe inserted into fitting and wastage etc. on P 150.00
3 xP/ 100
9999 Cement, sand and grit L.S. 2.73 2.12 5.79
Add 2% for special T&P and sundries etc. on P 100.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 6412.35
Add 1 % Water charges on "W" 64.12
TOTAL 6476.47
Add GST on "X" (multiplying factor 0.1405) 909.94
TOTAL 7386.42
Add 15% CPOH on "Y" 1107.96
TOTAL 8494.38
Add Cess @ 1% on "Z" 84.94
Cost of 10 metre 8579.32
Cost of 1 metre 857.93
Say 857.95
18.85A.3 28 mm outer dia Pipe
Code Description Unit Quantity Rate Rs. Amount Rs. P
Details of cost for 10 metre WXY
MATERIAL Z
3864 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 28 mm outer dia
metre 10.00 650.00 6500.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00798 145.72 1.16
Add 3% for pipe inserted into fitting and wastage etc. on P 195.00
3xP/ 100
9999 Cement, sand and grit L.S. 4.16 2.12 8.82
Add 2% for special T&P and sundries etc. on P 130.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 7990.64
Add 1 % Water charges on "W" 79.91
TOTAL 8070.55
Add GST on "X" (multiplying factor 0.1405) 1133.91
TOTAL 9204.46
Add 15% CPOH on "Y" 1380.67
TOTAL 10585.13
Add Cess @ 1% on "Z" 105.85
Cost of 10 metre 10690.98
Cost of 1 metre 1069.10
Say 1069.10

18.85A.4 35 mm outer dia Pipe


P
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 10 metre
MATERIAL
3865 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 35 mm outer dia
metre 10.00 945.00 9450.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.01246 145.72 1.82
Add 3% for pipe inserted into fitting and wastage etc. on P 283.50
3xP/ 100
9999 Cement, sand and grit L.S. 4.16 2.12 8.82
Add 2% for special T&P and sundries etc. on P 189.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 11088.79
Add 1 % Water charges on "W" 110.89
TOTAL 11199.68
Add GST on "X" (multiplying factor 0.1405) 1573.56
TOTAL 12773.24
Add 15% CPOH on "Y" 1915.99
TOTAL 14689.22
Add Cess @ 1% on "Z" 146.89
Cost of 10 metre 14836.12
Cost of 1 metre 1483.61
Say 1483.60
18.85A.5 42 mm outer dia Pipe
P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
3866 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 42 mm outer dia
metre 10.00 1160.00 11600.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.0151 145.72 2.20
Add 3% for pipe inserted into fitting and wastage etc. on P 348.00
3xP/ 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
Add 2% for special T&P and sundries etc. on P 232.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 13349.16
Add 1 % Water charges on "W" 133.49
TOTAL 13482.65
Add GST on "X" (multiplying factor 0.1405) 1894.31
TOTAL 15376.96
Add 15% CPOH on "Y" 2306.54
TOTAL 17683.51
Add Cess @ 1% on "Z" 176.84
Cost of 10 metre 17860.34
Cost of 1 metre 1786.03
Say 1786.05

18.85A.6 54 mm outer dia Pipe


P
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 10 metre
MATERIAL
3867 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 54 mm outer dia
metre 10.00 1500.00 15000.00
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.01953 145.72 2.85
Add 3% for pipe inserted into fitting and wastage etc. on P 450.00
3xP/ 100
9999 Cement, sand and grit L.S. 5.33 2.12 11.30
Add 2% for special T&P and sundries etc. on P 300.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.70
TOTAL 16919.81
Add 1 % Water charges on "W" 169.20
TOTAL 17089.00
Add GST on "X" (multiplying factor 0.1405) 2401.01
TOTAL 19490.01
Add 15% CPOH on "Y" 2923.50
TOTAL 22413.51
Add Cess @ 1% on "Z" 224.14
Cost of 10 metre 22637.64
Cost of 1 metre 2263.76
Say 2263.75
18.86 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be p
separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints com
as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be
measured for payment)

Internal work - Concealed Pipe

18.86.1 15.88 mm outer dia .Pipes.


P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
8779 SS pipe 304 grades with press fit technology as per JIS 3448
standard 15.88 mm outer dia metre 10.00 140.00 1400.00
Add 3% for pipe inserted into fitting and wastage etc. on P 42.00
3xP/ 100
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00301 145.72 0.44
Making chases upto 7.5x7.5 cm.in walls and making good the
same
18.78 Rate as per Item No.18.78 of SH:WATER SUPPLY metre 10.00 171.80 1718
Add 2% for special T&P and sundries etc. on P 28.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.7
TOTAL 4344.10
Add 1 % Water charges on "W-A" 26.26
TOTAL 4370.36
Add GST on "X-A" (multiplying factor 0.1405) 372.66
TOTAL 4743.02
Add 15% CPOH on "Y-A" 453.75
TOTAL 5196.77
Add Cess @ 1% on "Z-A" 34.79
Cost of 10 metre 5231.56
Cost of 1 metre 523.16
Say 523.15

18.86.2 22.22 mm Outer dia pipes


P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXY
MATERIAL Z
8780 SS pipe 304 grades with press fit technology as per JIS 3448
standard 22.22 mm outer dia metre 10.00 250.00 2500.00
Add 3% for pipe inserted into fitting and wastage etc. on P 75.00
3xP/ 100
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00529 145.72 0.77
Making chases upto 7.5x7.5 cm.in walls and making good the
same
18.78 Rate as per Item No.18.78 of SH: WATER SUPPLY metre 10.00 171.80 1718
Add 2% for special T&P and sundries etc. on P 50.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.7
TOTAL 5499.43
Add 1 % Water charges on "W-A" 37.81
TOTAL 5537.25
Add GST on "X-A" (multiplying factor 0.1405) 536.60
TOTAL 6073.85
Add 15% CPOH on "Y-A" 653.38
TOTAL 6727.23
Add Cess @ 1% on "Z-A" 50.09
Cost of 10 metre 6777.32
Cost of 1 metre 677.73
Say 677.75
Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards complete with pre
type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and maki
18.86A
good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be
18.86A.1
measured for payment)
Internal work - Concealed Pipe 15 mm outer dia .Pipes.

Code Description Unit Quantity Rate Rs. Amount Rs. P


Details of cost for 10 metre A
MATERIAL WXYZ
3862 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 15 mm outer dia
metre 10.00 310.00 3100.00
Add 3% for pipe inserted into fitting and wastage etc. on P . 93.00
3xP/ 100
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.003472 145.72 0.51
Making chases upto 7.5x7.5 cm.in walls and making good the
same
18.78 Rate as per Item No.18.78 of SH:WATER SUPPLY metre 10.00 171.80 1718
Add 2% for special T&P and sundries etc. on P 62.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.7
TOTAL 6129.17
Add 1 % Water charges on "W-A" 44.11
TOTAL 6173.28
Add GST on "X" (multiplying factor 0.1405) 625.97
TOTAL 6799.24
Add 15% CPOH on "Y-A" 762.19
TOTAL 7561.43
Add Cess @ 1% on "Z-A" 58.43
Cost of 10 metre 7619.87
Cost of 1 metre 761.99
Say 762.00

18.86A.2 22 mm Outer dia pipes

P
Code Description Unit Quantity Rate Rs. Amount Rs. A
Details of cost for 10 metre WXYZ
MATERIAL
3863 SS pipe 316L grade as per IS 6911:2017 with press fit
technology conforming to EN-10312 standards 22 mm outer dia
metre 10.00 500.00 5000.00
Add 3% for pipe inserted into fitting and wastage etc. on P 150.00
3xP/ 100
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 0.00619 145.72 0.90
Making chases upto 7.5x7.5 cm.in walls and making good the
same
18.78 Rate as per Item No.18.78 of SH: WATER SUPPLY metre 10.00 171.80 1718
Add 2% for special T&P and sundries etc. on P 100.00
2xP/ 100
LABOUR
0116 Fitter (grade 1) day 0.33 784.00 258.72
0117 Assistant Fitter or 2nd class Fitter day 0.66 714.00 471.24
0114 Beldar day 0.66 645.00 425.7
TOTAL 8124.56
Add 1 % Water charges on "W-A" 64.07
TOTAL 8188.63
Add GST on "X" (multiplying factor 0.1405) 909.12
TOTAL 9097.75
Add 15% CPOH on "Y-A" 1106.96
TOTAL 10204.71
Add Cess @ 1% on "Z-A" 84.87
Cost of 10 metre 10289.58
Cost of 1 metre 1028.96
Say 1028.95
18.87 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Coupling/Socket
18.87.1 For 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe each 1.00 60.00 60.00
TOTAL 60.00
Add 1 % Water charges on "W" 0.60
TOTAL 60.60
Add GST on "X" (multiplying factor 0.1405) 8.51
TOTAL 69.11
Add 15% CPOH on "Y" 10.37
TOTAL 79.48
Add Cess @ 1% on "Z" 0.79
Cost of 1 no. 80.28
Say 80.30

18.87.2 For 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8786 Coupling/Socket fittings for 22.22 mm outer dia SS pipe each 1.00 70.00 70.00
TOTAL 70.00
Add 1 % Water charges on "W" 0.70
TOTAL 70.70
Add GST on "X" (multiplying factor 0.1405) 9.93
TOTAL 80.63
Add 15% CPOH on "Y" 12.10
TOTAL 92.73
Add Cess @ 1% on "Z" 0.93
Cost of 1 no. 93.66
Say 93.65

18.87.3 For 28.58 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8787 Coupling/Socket fittings for 28.58 mm outer dia SS pipe each 1.00 96.25 96.25
TOTAL 96.25
Add 1 % Water charges on "W" 0.96
TOTAL 97.21
Add GST on "X" (multiplying factor 0.1405) 13.66
TOTAL 110.87
Add 15% CPOH on "Y" 16.63
TOTAL 127.50
Add Cess @ 1% on "Z" 1.28
Cost of 1 no. 128.78
Say 128.80

18.87.4 For 34.00 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8788 Coupling/Socket fittings for 34.00 mm outer dia SS pipe each 1.00 135.00 135.00
TOTAL 135.00 W X Y
Add 1 % Water charges on "W" 1.35 Z
TOTAL 136.35
Add GST on "X" (multiplying factor 0.1405) 19.16
TOTAL 155.51
Add 15% CPOH on "Y" 23.33
TOTAL 178.83
Add Cess @ 1% on "Z" 1.79
Cost of 1 no. 180.62
Say 180.60
18.87.5 For 42.70 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.

WXY
Z
Details of cost for 1 no.
MATERIAL
8789 Coupling/Socket fittings for 42.70 mm outer dia SS pipe each 1.00 160.00 160.00
TOTAL 160.00 W X Y
Add 1 % Water charges on "W" 1.60 Z
TOTAL 161.60
Add GST on "X" (multiplying factor 0.1405) 22.70
TOTAL 184.30
Add 15% CPOH on "Y" 27.65
TOTAL 211.95
Add Cess @ 1% on "Z" 2.12
Cost of 1 no. 214.07
Say 214.05

18.87.6 For 48.60 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8790 Coupling/Socket fittings for 48.60 mm outer dia SS pipe each 1.00 180.00 180.00
TOTAL 180.00
Add 1 % Water charges on "W" 1.80
TOTAL 181.80
Add GST on "X" (multiplying factor 0.1405) 25.54
TOTAL 207.34
Add 15% CPOH on "Y" 31.10
TOTAL 238.44
Add Cess @ 1% on "Z" 2.38
Cost of 1 no. 240.83
Say 240.85
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.87A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Coupling/Socket
18.87A.1 For 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3868 Coupling/Socket fittings for 15 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 215.00 215.00 W X Y
TOTAL 215.00 Z
Add 1 % Water charges on "W" 2.15
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost of 1 no. 287.66
Say 287.65

18.87A.2 For 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3869 Coupling/Socket fittings for 22 mm outer dia SS pipe of grade
316 L as per IS 6911:2017 and conforming to EN-10312
each 1.00 270.00 270.00
TOTAL 270.00 W X Y Z
Add 1 % Water charges on "W" 2.70
TOTAL 272.70
Add GST on "X" (multiplying factor 0.1405) 38.31
TOTAL 311.01
Add 15% CPOH on "Y" 46.65
TOTAL 357.67
Add Cess @ 1% on "Z" 3.58
Cost of 1 no. 361.24
Say 361.25
18.87A.3 For 28 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.

WXY
Z
Details of cost for 1 no.
MATERIAL
3870 Coupling/Socket fittings for 28 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 315.00 315.00 W X Y
TOTAL 315.00 Z
Add 1 % Water charges on "W" 3.15
TOTAL 318.15
Add GST on "X" (multiplying factor 0.1405) 44.70
TOTAL 362.85
Add 15% CPOH on "Y" 54.43
TOTAL 417.28
Add Cess @ 1% on "Z" 4.17
Cost of 1 no. 421.45
Say 421.45

18.87A.4 For 35 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3871 Coupling/Socket fittings for 35 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 395.00 395.00
TOTAL 395.00 W X Y Z
Add 1 % Water charges on "W" 3.95
TOTAL 398.95
Add GST on "X" (multiplying factor 0.1405) 56.05
TOTAL 455.00
Add 15% CPOH on "Y" 68.25
TOTAL 523.25
Add Cess @ 1% on "Z" 5.23
Cost of 1 no. 528.49
Say 528.50

18.87A.5 For 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3872 Coupling/Socket fittings for 42 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 535.00 535.00
TOTAL 535.00 W X Y Z
Add 1 % Water charges on "W" 5.35
TOTAL 540.35
Add GST on "X" (multiplying factor 0.1405) 75.92
TOTAL 616.27
Add 15% CPOH on "Y" 92.44
TOTAL 708.71
Add Cess @ 1% on "Z" 7.09
Cost of 1 no. 715.80
Say 715.80

18.87A.6 For 54 mm outer dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3873 Coupling/Socket fittings for 54 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 640.00 640.00
TOTAL 640.00 W X Y Z
Add 1 % Water charges on "W" 6.40
TOTAL 646.40
Add GST on "X" (multiplying factor 0.1405) 90.82
TOTAL 737.22
Add 15% CPOH on "Y" 110.58
TOTAL 847.80
Add Cess @ 1% on "Z" 8.48
Cost of 1 no. 856.28
Say 856.30
18.88 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conformin
JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per dirction of Engineer-in-charge.
Reducer
18.88.1 For 22.22 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe each 1.00 108.50 108.50
TOTAL 108.50 W X Y
Add 1 % Water charges on "W" 1.09 Z
TOTAL 109.59
Add GST on "X" (multiplying factor 0.1405) 15.40
TOTAL 124.98
Add 15% CPOH on "Y" 18.75
TOTAL 143.73
Add Cess @ 1% on "Z" 1.44
Cost of 1 no. 145.17
Say 145.15

18.88.2 For 28.58 mm x 15.88 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8792 Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe each 1.00 152.50 152.50
TOTAL 152.50
Add 1 % Water charges on "W" 1.53
TOTAL 154.03
Add GST on "X" (multiplying factor 0.1405) 21.64
TOTAL 175.67
Add 15% CPOH on "Y" 26.35
TOTAL 202.02
Add Cess @ 1% on "Z" 2.02
Cost of 1 no. 204.04
Say 204.05

18.88.3 For 28.58 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8793 Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe each 1.00 161.50 161.50
TOTAL 161.50
Add 1 % Water charges on "W" 1.62
TOTAL 163.12
Add GST on "X" (multiplying factor 0.1405) 22.92
TOTAL 186.03
Add 15% CPOH on "Y" 27.90
TOTAL 213.94
Add Cess @ 1% on "Z" 2.14
Cost of 1 no. 216.08
Say 216.10

18.88.4 For 34.00 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8794 Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe each 1.00 200.00 200.00
TOTAL 200.00
Add 1 % Water charges on "W" 2.00
TOTAL 202.00
Add GST on "X" (multiplying factor 0.1405) 28.38
TOTAL 230.38
Add 15% CPOH on "Y" 34.56
TOTAL 264.94
Add Cess @ 1% on "Z" 2.65
Cost of 1 no. 267.59
Say 267.60
18.88.5 For 34.00 mm x 22.22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.

WXY
Z
Details of cost for 1 no.
MATERIAL
8795 Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe each 1.00 210.00 210.00
TOTAL 210.00 W X Y
Add 1 % Water charges on "W" 2.10 Z
TOTAL 212.10
Add GST on "X" (multiplying factor 0.1405) 29.80
TOTAL 241.90
Add 15% CPOH on "Y" 36.29
TOTAL 278.19
Add Cess @ 1% on "Z" 2.78
Cost of 1 no. 280.97
Say 280.95

18.88.6 For 34.00 mm x 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8796 Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe each 1.00 210.00 210.00
TOTAL 210.00
WXY
Add 1 % Water charges on "W" 2.10 Z
TOTAL 212.10
Add GST on "X" (multiplying factor 0.1405) 29.80
TOTAL 241.90
Add 15% CPOH on "Y" 36.29
TOTAL 278.19
Add Cess @ 1% on "Z" 2.78
Cost of 1 no. 280.97
Say 280.95

18.88.7 For 42.70 mm x 15.88 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8797 Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe each 1.00 375.00 375.00
TOTAL 375.00
Add 1 % Water charges on "W" 3.75
TOTAL 378.75
Add GST on "X" (multiplying factor 0.1405) 53.21
TOTAL 431.96
Add 15% CPOH on "Y" 64.79
TOTAL 496.76
Add Cess @ 1% on "Z" 4.97
Cost of 1 no. 501.73
Say 501.75

18.88.8 For 42.70 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8798 Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe each 1.00 375.00 375.00
TOTAL 375.00
Add 1 % Water charges on "W" 3.75
TOTAL 378.75
Add GST on "X" (multiplying factor 0.1405) 53.21
TOTAL 431.96
Add 15% CPOH on "Y" 64.79
TOTAL 496.76
Add Cess @ 1% on "Z" 4.97
Cost of 1 no. 501.73
Say 501.75
18.88.9 For 42.70 mm x 28.58 mm outer dia pipe
WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8799 Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe each 1.00 390.00 390.00
TOTAL 390.00
Add 1 % Water charges on "W" 3.90
TOTAL 393.90
Add GST on "X" (multiplying factor 0.1405) 55.34
TOTAL 449.24
Add 15% CPOH on "Y" 67.39
TOTAL 516.63
Add Cess @ 1% on "Z" 5.17
Cost of 1 no. 521.80
Say 521.80

18.88.10 For 42.70 mm x 34.00 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8800 Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe each 1.00 390.00 390.00
TOTAL 390.00 W X Y
Add 1 % Water charges on "W" 3.90 Z
TOTAL 393.90
Add GST on "X" (multiplying factor 0.1405) 55.34
TOTAL 449.24
Add 15% CPOH on "Y" 67.39
TOTAL 516.63
Add Cess @ 1% on "Z" 5.17
Cost of 1 no. 521.80
Say 521.80

18.88.11 For 48.60 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8801 Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe each 1.00 425.00 425.00
TOTAL 425.00
WXY
Add 1 % Water charges on "W" 4.25 Z
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60

18.88.12 For 48.60 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8802 Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe each 1.00 425.00 425.00
TOTAL 425.00
Add 1 % Water charges on "W" 4.25
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60
18.88.13 For 48.60 mm x 28.58 mm outer dia pipe
WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8803 Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe each 1.00 425.00 425.00
TOTAL 425.00
Add 1 % Water charges on "W" 4.25
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60

18.88.14 For 48.60 mm x 34.00 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8804 Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe each 1.00 425.00 425.00
WXYZ

TOTAL 425.00
Add 1 % Water charges on "W" 4.25
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60

18.88.15 For 48.60 mm x 42.70 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 1.00 425.00 425.00
TOTAL 425.00
Add 1 % Water charges on "W" 4.25
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.88A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per dirction of Engineer-in-charge.

Reducer
18.88A.1 For 22mm x 15 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3874 Reducer for 22mm x 15 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 255.00 255.00
TOTAL 255.00
WXYZ
Add 1 % Water charges on "W" 2.55
TOTAL 257.55
Add GST on "X" (multiplying factor 0.1405) 36.19
TOTAL 293.74
Add 15% CPOH on "Y" 44.06
TOTAL 337.80
Add Cess @ 1% on "Z" 3.38
Cost of 1 no. 341.17
Say 341.15
18.88A.2 For 28 mm x 15 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3875 Reducer for 28 mm X 15 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 375.00 375.00
TOTAL 375.00 W X Y Z
Add 1 % Water charges on "W" 3.75
TOTAL 378.75
Add GST on "X" (multiplying factor 0.1405) 53.21
TOTAL 431.96
Add 15% CPOH on "Y" 64.79
TOTAL 496.76
Add Cess @ 1% on "Z" 4.97
Cost of 1 no. 501.73
Say 501.75

18.88A.3 For 28 mm x 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3876 Reducer for 28 mm x 22 mm outer Dia SS pipe of grade 316L
as per IS 6911:2017 and conforming to EN-10312 each 1.00 310.00 310.00
TOTAL 310.00 W X Y Z
WXYZ
Add 1 % Water charges on "W" 3.10
TOTAL 313.10
Add GST on "X" (multiplying factor 0.1405) 43.99
TOTAL 357.09
Add 15% CPOH on "Y" 53.56
TOTAL 410.65
Add Cess @ 1% on "Z" 4.11
Cost of 1 no. 414.76
Say 414.75

18.88A.4 For 35 mm x 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3877 Reducer for 35 mm x 22 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 380.00 380.00
TOTAL 380.00 W X Y
Add 1 % Water charges on "W" 3.80 Z
TOTAL 383.80
Add GST on "X" (multiplying factor 0.1405) 53.92
TOTAL 437.72
Add 15% CPOH on "Y" 65.66
TOTAL 503.38
Add Cess @ 1% on "Z" 5.03
Cost of 1 no. 508.42
Say 508.40

18.88A.5 For 35 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3878 Reducer for 35 mm x 28 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 470.00 470.00
TOTAL 470.00 W X Y
Z
Add 1 % Water charges on "W" 4.70
TOTAL 474.70
Add GST on "X" (multiplying factor 0.1405) 66.70
TOTAL 541.40
Add 15% CPOH on "Y" 81.21
TOTAL 622.60
Add Cess @ 1% on "Z" 6.23
Cost of 1 no. 628.83
Say 628.85
18.88A.6 For 42 mm x 22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3879 Reducer for 42 mm x 22 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 690.00 690.00
TOTAL 690.00 W X Y Z
Add 1 % Water charges on "W" 6.90
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20

18.88A.7 For 42 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
3880 Reducer for 42 mm x 28 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 720.00 720.00
TOTAL 720.00
Add 1 % Water charges on "W" 7.20
TOTAL 727.20
Add GST on "X" (multiplying factor 0.1405) 102.17
TOTAL 829.37
Add 15% CPOH on "Y" 124.41
TOTAL 953.78
Add Cess @ 1% on "Z" 9.54
Cost of 1 no. 963.32
Say 963.30

18.88A.8 For 42 mm x 35 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3881 Reducer for 42 mm x 35 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 605.00 605.00
TOTAL 605.00 W X Y Z
Add 1 % Water charges on "W" 6.05
TOTAL 611.05
Add GST on "X" (multiplying factor 0.1405) 85.85
TOTAL 696.90
Add 15% CPOH on "Y" 104.54
TOTAL 801.44
Add Cess @ 1% on "Z" 8.01
Cost of 1 no. 809.45
Say 809.45

18.88A.9 For 54 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
3882 Reducer for 54 mm x 28 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 990.00 990.00
TOTAL 990.00
Add 1 % Water charges on "W" 9.90
TOTAL 999.90
Add GST on "X" (multiplying factor 0.1405) 140.49
TOTAL 1140.39
Add 15% CPOH on "Y" 171.06
TOTAL 1311.44
Add Cess @ 1% on "Z" 13.11
Cost of 1 no. 1324.56
Say 1324.55
18.88A.10 For 54 mm x 35 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3883 Reducer for 54 mm x 35 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 1030.00 1030.00
TOTAL 1030.00 W X Y Z
Add 1 % Water charges on "W" 10.30
TOTAL 1040.30
Add GST on "X" (multiplying factor 0.1405) 146.16
TOTAL 1186.46
Add 15% CPOH on "Y" 177.97
TOTAL 1364.43
Add Cess @ 1% on "Z" 13.64
Cost of 1 no. 1378.08
Say 1378.10

18.88A.11 For 54 mm x 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3884 Reducer for 54 mm x 42 mm outer Dia SS pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 835.00 835.00
TOTAL 835.00 W X Y
Z
Add 1 % Water charges on "W" 8.35
TOTAL 843.35
Add GST on "X" (multiplying factor 0.1405) 118.49
TOTAL 961.84
Add 15% CPOH on "Y" 144.28
TOTAL 1106.12
Add Cess @ 1% on "Z" 11.06
Cost of 1 no. 1117.18
Say 1117.20
18.89 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Slip Coupling/ Socket

18.89.1 For 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 1.00 55.00 55.00
TOTAL 55.00
WXYZ
Add 1 % Water charges on "W" 0.55
TOTAL 55.55
Add GST on "X" (multiplying factor 0.1405) 7.80
TOTAL 63.35
Add 15% CPOH on "Y" 9.50
TOTAL 72.86
Add Cess @ 1% on "Z" 0.73
Cost of 1 no. 73.59
Say 73.60
18.89.2 For 22.22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8807 Slip Coupling / Socket 22.22 mm outer dia SS pipe each 1.00 70.00 70.00
TOTAL 70.00 W X Y
Add 1 % Water charges on "W" 0.70 Z
TOTAL 70.70
Add GST on "X" (multiplying factor 0.1405) 9.93
TOTAL 80.63
Add 15% CPOH on "Y" 12.10
TOTAL 92.73
Add Cess @ 1% on "Z" 0.93
Cost of 1 no. 93.66
Say 93.65

18.89.3 For 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8808 Slip Coupling / Socket 28.58 mm outer dia SS pipe each 1.00 95.00 95.00
TOTAL 95.00 W X Y
Add 1 % Water charges on "W" 0.95 Z
TOTAL 95.95
Add GST on "X" (multiplying factor 0.1405) 13.48
TOTAL 109.43
Add 15% CPOH on "Y" 16.41
TOTAL 125.85
Add Cess @ 1% on "Z" 1.26
Cost of 1 no. 127.10
Say 127.10

18.89.4 For 34.00 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8809 Slip Coupling / Socket 34.00 mm outer dia SS pipe each 1.00 135.00 135.00
TOTAL 135.00
Add 1 % Water charges on "W" 1.35
TOTAL 136.35
Add GST on "X" (multiplying factor 0.1405) 19.16
TOTAL 155.51
Add 15% CPOH on "Y" 23.33
TOTAL 178.83
Add Cess @ 1% on "Z" 1.79
Cost of 1 no. 180.62
Say 180.60

18.89.5 For 42.70 mm outer dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8810 Slip Coupling / Socket 42.70 mm outer dia SS pipe each 1.00 160.00 160.00
TOTAL 160.00
Add 1 % Water charges on "W" 1.60
TOTAL 161.60
Add GST on "X" (multiplying factor 0.1405) 22.70
TOTAL 184.30
Add 15% CPOH on "Y" 27.65
TOTAL 211.95
Add Cess @ 1% on "Z" 2.12
Cost of 1 no. 214.07
Say 214.05
18.89.6 For 48.60 mm outer dia pipe
WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8811 Slip Coupling / Socket 48.60 mm outer dia SS pipe each 1.00 175.00 175.00
TOTAL 175.00
Add 1 % Water charges on "W" 1.75
TOTAL 176.75
Add GST on "X" (multiplying factor 0.1405) 24.83
TOTAL 201.58
Add 15% CPOH on "Y" 30.24
TOTAL 231.82
Add Cess @ 1% on "Z" 2.32
Cost of 1 no. 234.14
Say 234.15
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.89A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Sleeve/Slip Coupling/ Socket


18.89A.1 For 15 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3885 Sleeve/ Slip Coupling / Socket 15 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 375.00 375.00
TOTAL 375.00 W X Y Z
Add 1 % Water charges on "W" 3.75
TOTAL 378.75
Add GST on "X" (multiplying factor 0.1405) 53.21
TOTAL 431.96
Add 15% CPOH on "Y" 64.79
TOTAL 496.76
Add Cess @ 1% on "Z" 4.97
Cost of 1 no. 501.73
Say 501.75

18.89A.2 For 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3886 Sleeve/ Slip Coupling / Socket 22 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 450.00 450.00
TOTAL 450.00 W X Y Z
Add 1 % Water charges on "W" 4.50
TOTAL 454.50
Add GST on "X" (multiplying factor 0.1405) 63.86
TOTAL 518.36
Add 15% CPOH on "Y" 77.75
TOTAL 596.11
Add Cess @ 1% on "Z" 5.96
Cost of 1 no. 602.07
Say 602.05

18.89A.3 For 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.

WXYZ
Details of cost for 1 no.
MATERIAL
3887 Sleeve/ Slip Coupling / Socket 28 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 520.00 520.00
TOTAL 520.00 W X Y Z
Add 1 % Water charges on "W" 5.20
TOTAL 525.20
Add GST on "X" (multiplying factor 0.1405) 73.79
TOTAL 598.99
Add 15% CPOH on "Y" 89.85
TOTAL 688.84
Add Cess @ 1% on "Z" 6.89
Cost of 1 no. 695.73
Say 695.75
18.89A.4 For 35 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3888 Sleeve/ Slip Coupling / Socket 35 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 580.00 580.00
TOTAL 580.00 W X Y Z
Add 1 % Water charges on "W" 5.80
TOTAL 585.80
Add GST on "X" (multiplying factor 0.1405) 82.30
TOTAL 668.10
Add 15% CPOH on "Y" 100.22
TOTAL 768.32
Add Cess @ 1% on "Z" 7.68
Cost of 1 no. 776.00
Say 776.00

18.89A.5 For 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3889 Sleeve/ Slip Coupling / Socket 42 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 670.00 670.00
TOTAL 670.00 W X Y Z
Add 1 % Water charges on "W" 6.70
TOTAL 676.70
Add GST on "X" (multiplying factor 0.1405) 95.08
TOTAL 771.78
Add 15% CPOH on "Y" 115.77
TOTAL 887.54
Add Cess @ 1% on "Z" 8.88
Cost of 1 no. 896.42
Say 896.40

18.89A.6 For 54 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3890 Sleeve/ Slip Coupling / Socket 54 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 955.00 955.00
TOTAL 955.00 W X Y Z
Add 1 % Water charges on "W" 9.55
TOTAL 964.55
Add GST on "X" (multiplying factor 0.1405) 135.52
TOTAL 1100.07
Add 15% CPOH on "Y" 165.01
TOTAL 1265.08
Add Cess @ 1% on "Z" 12.65
Cost of 1 no. 1277.73
Say 1277.75
18.90 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Elbow 90°
18.90.1 For 15.88mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 1 no.
MATERIAL
8812 Elbow 90° for 15.88 mm outer dia SS pipe each 1.00 65.00 65.00
TOTAL 65.00
Add 1 % Water charges on "W" 0.65
TOTAL 65.65
Add GST on "X" (multiplying factor 0.1405) 9.22
TOTAL 74.87
Add 15% CPOH on "Y" 11.23
TOTAL 86.10
Add Cess @ 1% on "Z" 0.86
Cost of 1 no. 86.97
Say 86.95
18.90.2 For 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8813 Elbow 90° for 22.22 mm outer dia SS pipe each 1.00 70.00 70.00
TOTAL 70.00 W X Y
Add 1 % Water charges on "W" 0.70 Z
TOTAL 70.70
Add GST on "X" (multiplying factor 0.1405) 9.93
TOTAL 80.63
Add 15% CPOH on "Y" 12.10
TOTAL 92.73
Add Cess @ 1% on "Z" 0.93
Cost of 1 no. 93.66
Say 93.65

18.90.3 For 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8814 Elbow 90° for 28.58 mm outer dia SS pipe each 1.00 105.00 105.00
TOTAL 105.00 W X Y
Add 1 % Water charges on "W" 1.05 Z
TOTAL 106.05
Add GST on "X" (multiplying factor 0.1405) 14.90
TOTAL 120.95
Add 15% CPOH on "Y" 18.14
TOTAL 139.09
Add Cess @ 1% on "Z" 1.39
Cost of 1 no. 140.48
Say 140.50

18.90.4 For 34.00 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8815 Elbow 90° for 34.00 mm outer dia SS pipe each 1.00 120.00 120.00
TOTAL 120.00
WXYZ
Add 1 % Water charges on "W" 1.20
TOTAL 121.20
Add GST on "X" (multiplying factor 0.1405) 17.03
TOTAL 138.23
Add 15% CPOH on "Y" 20.73
TOTAL 158.96
Add Cess @ 1% on "Z" 1.59
Cost of 1 no. 160.55
Say 160.55

18.90.5 For 42.70 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8816 Elbow 90° for 42.70 mm outer dia SS pipe each 1.00 130.00 130.00
TOTAL 130.00
WXYZ
Add 1 % Water charges on "W" 1.30
TOTAL 131.30
Add GST on "X" (multiplying factor 0.1405) 18.45
WXYZ

TOTAL 149.75
Add 15% CPOH on "Y" 22.46
TOTAL 172.21
Add Cess @ 1% on "Z" 1.72
Cost of 1 no. 173.93
Say 173.95
18.90.6 For 48.60 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8817 Elbow 90° for 48.60 mm outer dia SS pipe each 1.00 160.00 160.00
TOTAL 160.00
Add 1 % Water charges on "W" 1.60
TOTAL 161.60
Add GST on "X" (multiplying factor 0.1405) 22.70
TOTAL 184.30
Add 15% CPOH on "Y" 27.65
TOTAL 211.95
Add Cess @ 1% on "Z" 2.12
Cost of 1 no. 214.07
Say 214.05
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.90A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Elbow 90°
18.90A.1 For 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3891 Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 305.00 305.00
TOTAL 305.00 W X Y Z
Add 1 % Water charges on "W" 3.05
TOTAL 308.05
Add GST on "X" (multiplying factor 0.1405) 43.28
TOTAL 351.33
Add 15% CPOH on "Y" 52.70
TOTAL 404.03
Add Cess @ 1% on "Z" 4.04
Cost of 1 no. 408.07
Say 408.05

18.90A.2 For 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
3892 Elbow 90° for 22 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 430.00 430.00
TOTAL 430.00
Add 1 % Water charges on "W" 4.30
TOTAL 434.30
Add GST on "X" (multiplying factor 0.1405) 61.02
TOTAL 495.32
Add 15% CPOH on "Y" 74.30
TOTAL 569.62
Add Cess @ 1% on "Z" 5.70
Cost of 1 no. 575.31
Say 575.30

18.90A.3 For 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3893 Elbow 90° for 28 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 575.00 575.00
TOTAL 575.00 W X Y Z
Add 1 % Water charges on "W" 5.75
TOTAL 580.75
Add GST on "X" (multiplying factor 0.1405) 81.60
TOTAL 662.35
Add 15% CPOH on "Y" 99.35
WXYZ

TOTAL 761.70
Add Cess @ 1% on "Z" 7.62
Cost of 1 no. 769.31
Say 769.30
18.90A.4 For 35 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3894 Elbow 90° for 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 940.00 940.00
TOTAL 940.00 W X Y Z
Add 1 % Water charges on "W" 9.40
TOTAL 949.40
Add GST on "X" (multiplying factor 0.1405) 133.39
TOTAL 1082.79
Add 15% CPOH on "Y" 162.42
TOTAL 1245.21
Add Cess @ 1% on "Z" 12.45
Cost of 1 no. 1257.66
Say 1257.65

18.90A.5 For 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3895 Elbow 90° for 42 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1520.00 1520.00
TOTAL 1520.00
WXYZ
Add 1 % Water charges on "W" 15.20
TOTAL 1535.20
Add GST on "X" (multiplying factor 0.1405) 215.70
TOTAL 1750.90
Add 15% CPOH on "Y" 262.63
TOTAL 2013.53
Add Cess @ 1% on "Z" 20.14
Cost of 1 no. 2033.67
Say 2033.65

18.90A.6 For 54 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3896 Elbow 90° for 54 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 2010.00 2010.00
TOTAL 2010.00 W X Y
Z
Add 1 % Water charges on "W" 20.10
TOTAL 2030.10
Add GST on "X" (multiplying factor 0.1405) 285.23
TOTAL 2315.33
Add 15% CPOH on "Y" 347.30
TOTAL 2662.63
Add Cess @ 1% on "Z" 26.63
Cost of 1 no. 2689.25
Say 2689.25
18.91 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Reducing Elbow 90°
18.91.1 For22.22 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS
pipe each 1.00 150.00 150.00
TOTAL 150.00 W X Y Z
Add 1 % Water charges on "W" 1.50
TOTAL 151.50
Add GST on "X" (multiplying factor 0.1405) 21.29
TOTAL 172.79
Add 15% CPOH on "Y" 25.92
TOTAL 198.70
Add Cess @ 1% on "Z" 1.99
Cost of 1 no. 200.69
Say 200.70
18.91.2 For 28.58 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8819 Reducing Elbow 90° for 28.58 mm X 15.88 mm outer dia SS
pipe each 1.00 210.00 210.00
WXY
TOTAL 210.00 Z
Add 1 % Water charges on "W" 2.10
TOTAL 212.10
Add GST on "X" (multiplying factor 0.1405) 29.80
TOTAL 241.90
Add 15% CPOH on "Y" 36.29
TOTAL 278.19
Add Cess @ 1% on "Z" 2.78
Cost of 1 no. 280.97
Say 280.95

18.91.3 For 28.58 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8820 Reducing Elbow 90° for 28.58 mm X22.22 mm outer dia SS pipe
each 1.00 250.00 250.00
TOTAL 250.00 W X Y
Z
Add 1 % Water charges on "W" 2.50
TOTAL 252.50
Add GST on "X" (multiplying factor 0.1405) 35.48
TOTAL 287.98
Add 15% CPOH on "Y" 43.20
TOTAL 331.17
Add Cess @ 1% on "Z" 3.31
Cost of 1 no. 334.48
Say 334.50

18.91.4 For 34.00 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8821 Reducing Elbow 90° for 34.00 mm X 22.22 mm outer dia SS
pipe each 1.00 295.00 295.00
TOTAL 295.00 W X Y
Z
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost of 1 no. 394.69
Say 394.70

18.91.5 For 34.00 mm x 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8822 Reducing Elbow 90° for 34.00 mm X 28.58 mm outer dia SS
pipe each 1.00 350.00 350.00
TOTAL 350.00 W X Y Z
Add 1 % Water charges on "W" 3.50
TOTAL 353.50
Add GST on "X" (multiplying factor 0.1405) 49.67
TOTAL 403.17
Add 15% CPOH on "Y" 60.48
TOTAL 463.64
Add Cess @ 1% on "Z" 4.64
Cost of 1 no. 468.28
Say 468.30
18.91.6 For 42.70 mm x 34.00 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 1 no.
MATERIAL
8823 Reducing Elbow 90° for 42.70 mm X 34.00 mm outer dia SS
pipe each 1.00 190.00 190.00
TOTAL 190.00
Add 1 % Water charges on "W" 1.90
TOTAL 191.90
Add GST on "X" (multiplying factor 0.1405) 26.96
TOTAL 218.86
Add 15% CPOH on "Y" 32.83
TOTAL 251.69
Add Cess @ 1% on "Z" 2.52
Cost of 1 no. 254.21
Say 254.20
18.92 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Equal Tee
18.92.1 For 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z


Details of cost for 1 no.
MATERIAL
8824 Equal Tee for 15.88 mm outer dia SS pipe each 1.00 175.00 175.00
TOTAL 175.00
Add 1 % Water charges on "W" 1.75
TOTAL 176.75
Add GST on "X" (multiplying factor 0.1405) 24.83
TOTAL 201.58
Add 15% CPOH on "Y" 30.24
TOTAL 231.82
Add Cess @ 1% on "Z" 2.32
Cost of 1 no. 234.14
Say 234.15

18.92.2 For 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z


Details of cost for 1 no.
MATERIAL
8825 Equal Tee for 22.22 mm outer dia SS pipe each 1.00 250.00 250.00
TOTAL 250.00
Add 1 % Water charges on "W" 2.50
TOTAL 252.50
Add GST on "X" (multiplying factor 0.1405) 35.48
TOTAL 287.98
Add 15% CPOH on "Y" 43.20
TOTAL 331.17
Add Cess @ 1% on "Z" 3.31
Cost of 1 no. 334.48
Say 334.50

18.92.3 For 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z


Details of cost for 1 no.
MATERIAL
8826 Equal Tee for 28.58 mm outer dia SS pipe each 1.00 295.00 295.00
TOTAL 295.00
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost of 1 no. 394.69
Say 394.70
18.92.4 For 34.00 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL

WXY
Z
8827 Equal Tee for 34.00 mm outer dia SS pipe each 1.00 440.00 440.00
TOTAL 440.00 W X Y
Add 1 % Water charges on "W" 4.40 Z
TOTAL 444.40
Add GST on "X" (multiplying factor 0.1405) 62.44
TOTAL 506.84
Add 15% CPOH on "Y" 76.03
TOTAL 582.86
Add Cess @ 1% on "Z" 5.83
Cost of 1 no. 588.69
Say 588.70

18.92.5 For 42.70 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8828 Equal Tee for 42.70 mm outer dia SS pipe each 1.00 695.00 695.00
TOTAL 695.00
WXY
Add 1 % Water charges on "W" 6.95 Z
TOTAL 701.95
Add GST on "X" (multiplying factor 0.1405) 98.62
TOTAL 800.57
Add 15% CPOH on "Y" 120.09
TOTAL 920.66
Add Cess @ 1% on "Z" 9.21
Cost of 1 no. 929.87
Say 929.85

18.92.6 For 48.60 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8829 Equal Tee for 48.60 mm outer dia SS pipe each 1.00 915.00 915.00
TOTAL 915.00
Add 1 % Water charges on "W" 9.15
TOTAL 924.15
Add GST on "X" (multiplying factor 0.1405) 129.84
TOTAL 1053.99
Add 15% CPOH on "Y" 158.10
TOTAL 1212.09
Add Cess @ 1% on "Z" 12.12
Cost of 1 no. 1224.21
Say 1224.20
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.92A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Equal Tee
18.92A.1 For 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3897 Equal Tee for 15 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 500.00 500.00
TOTAL 500.00 W X Y
Z
Add 1 % Water charges on "W" 5.00
TOTAL 505.00
Add GST on "X" (multiplying factor 0.1405) 70.95
TOTAL 575.95
Add 15% CPOH on "Y" 86.39
TOTAL 662.35
Add Cess @ 1% on "Z" 6.62
Cost of 1 no. 668.97
Say 668.95
18.92A.2 For 22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3898 Equal Tee for 22 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 585.00 585.00
TOTAL 585.00 W X Y Z
WXYZ
Add 1 % Water charges on "W" 5.85
TOTAL 590.85
Add GST on "X" (multiplying factor 0.1405) 83.01
TOTAL 673.86
Add 15% CPOH on "Y" 101.08
TOTAL 774.94
Add Cess @ 1% on "Z" 7.75
Cost of 1 no. 782.69
Say 782.70

18.92A.3 For 28 mm outer dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
3899 Equal Tee for 28 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 720.00 720.00
TOTAL 720.00
Add 1 % Water charges on "W" 7.20
TOTAL 727.20
Add GST on "X" (multiplying factor 0.1405) 102.17
TOTAL 829.37
Add 15% CPOH on "Y" 124.41
TOTAL 953.78
Add Cess @ 1% on "Z" 9.54
Cost of 1 no. 963.32
Say 963.30

18.92A.4 For 35 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3900 Equal Tee for 35 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 895.00 895.00
TOTAL 895.00 W X Y Z
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.92A.5 For 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
3901 Equal Tee for 42 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1250.00 1250.00
TOTAL 1250.00
Add 1 % Water charges on "W" 12.50
TOTAL 1262.50
Add GST on "X" (multiplying factor 0.1405) 177.38
TOTAL 1439.88
Add 15% CPOH on "Y" 215.98
TOTAL 1655.86
Add Cess @ 1% on "Z" 16.56
Cost of 1 no. 1672.42
Say 1672.40
18.92A.6 For 54 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
3902 Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1500.00 1500.00
TOTAL 1500.00
Add 1 % Water charges on "W" 15.00
TOTAL 1515.00
Add GST on "X" (multiplying factor 0.1405) 212.86
TOTAL 1727.86
Add 15% CPOH on "Y" 259.18
TOTAL 1987.04
Add Cess @ 1% on "Z" 19.87
Cost of 1 no. 2006.91
Say 2006.90
18.93 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Reducing Tee
18.93.1 For 22.22 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 1.00 185.00 185.00
TOTAL 185.00
Add 1 % Water charges on "W" 1.85
TOTAL 186.85
Add GST on "X" (multiplying factor 0.1405) 26.25
TOTAL 213.10
Add 15% CPOH on "Y" 31.97
TOTAL 245.07
Add Cess @ 1% on "Z" 2.45
Cost of 1 no. 247.52
Say 247.50

18.93.2 For 28.58 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 1.00 290.00 290.00
TOTAL 290.00
Add 1 % Water charges on "W" 2.90
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00

18.93.3 For 28.58 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8832 Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe each 1.00 290.00 290.00
TOTAL 290.00
WXY
Add 1 % Water charges on "W" 2.90 Z
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00
18.93.4 For 34.00 mm x 15.88 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8833 Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe each 1.00 440.00 440.00
TOTAL 440.00 W X Y
Add 1 % Water charges on "W" 4.40 Z
TOTAL 444.40
Add GST on "X" (multiplying factor 0.1405) 62.44
TOTAL 506.84
Add 15% CPOH on "Y" 76.03
TOTAL 582.86
Add Cess @ 1% on "Z" 5.83
Cost of 1 no. 588.69
Say 588.70

18.93.5 For 34.00 mm x 22.22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
WXYZ

MATERIAL
8834 Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe each 1.00 440.00 440.00
TOTAL 440.00
Add 1 % Water charges on "W" 4.40
TOTAL 444.40
Add GST on "X" (multiplying factor 0.1405) 62.44
TOTAL 506.84
Add 15% CPOH on "Y" 76.03
TOTAL 582.86
Add Cess @ 1% on "Z" 5.83
Cost of 1 no. 588.69
Say 588.70

18.93.6 For 34.00 mm x 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8835 Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe each 1.00 440.00 440.00
TOTAL 440.00
Add 1 % Water charges on "W" 4.40
TOTAL 444.40
Add GST on "X" (multiplying factor 0.1405) 62.44
TOTAL 506.84
Add 15% CPOH on "Y" 76.03
TOTAL 582.86
Add Cess @ 1% on "Z" 5.83
Cost of 1 no. 588.69
Say 588.70

18.93.7 For 42.70 mm x 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8836 Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe each 1.00 690.00 690.00
TOTAL 690.00
Add 1 % Water charges on "W" 6.90
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20
18.93.8 For 42.70 mm x 22.22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs. W X Y Z
Details of cost for 1 no.
MATERIAL
8837 Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe each 1.00 690.00 690.00
TOTAL 690.00
Add 1 % Water charges on "W" 6.90
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20

18.93.9 For 42.70 mm x 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8838 Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe each 1.00 690.00 690.00
TOTAL 690.00 W X Y
Add 1 % Water charges on "W" 6.90 Z
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20

18.93.10 For 42.70 mm x 34.00 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8839 Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe each 1.00 690.00 690.00
TOTAL 690.00 W X Y
Add 1 % Water charges on "W" 6.90 Z
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20

18.93.11 For 48.60 mm x 15.88 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8840 Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe each 1.00 895.00 887.00
TOTAL 887.00
Add 1 % Water charges on "W" 8.87
TOTAL 895.87
Add GST on "X" (multiplying factor 0.1405) 125.87
TOTAL 1021.74
Add 15% CPOH on "Y" 153.26
TOTAL 1175.00
Add Cess @ 1% on "Z" 11.75
Cost of 1 no. 1186.75
Say 1186.75
18.93.12 For 48.60 mm x 22.22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8841 Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe each 1.00 895.00 895.00
TOTAL 895.00
WXY
Add 1 % Water charges on "W" 8.95 Z
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.93.13 For 48.60 mm x 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8842 Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe each 1.00 895.00 895.00
TOTAL 895.00
WXY
Add 1 % Water charges on "W" 8.95 Z
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.93.14 For 48.60 mm x 34.00 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 1.00 895.00 895.00
TOTAL 895.00
Add 1 % Water charges on "W" 8.95
WXYZ

TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.93.15 For 48.60 mm x 42.70 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 1.00 895.00 895.00
TOTAL 895.00
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
18.93A V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
18.93A.1 Reducing Tee
For 22 mm x 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3903 Reducing Tee for 22 mm x 15 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 575.00 575.00
TOTAL 575.00 W X Y Z
Add 1 % Water charges on "W" 5.75
TOTAL 580.75
Add GST on "X" (multiplying factor 0.1405) 81.60
TOTAL 662.35
Add 15% CPOH on "Y" 99.35
TOTAL 761.70
Add Cess @ 1% on "Z" 7.62
Cost of 1 no. 769.31
Say 769.30

18.93A.2 For 28 mm x 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3904 Reducing Tee for 28 mm X 15 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 715.00 715.00
TOTAL 715.00 W X Y Z
Add 1 % Water charges on "W" 7.15
TOTAL 722.15
Add GST on "X" (multiplying factor 0.1405) 101.46
TOTAL 823.61
Add 15% CPOH on "Y" 123.54
TOTAL 947.15
Add Cess @ 1% on "Z" 9.47
Cost of 1 no. 956.63
Say 956.65

18.93A.3 For 28 mm x 22 mm outer dia pipe


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3905 Reducing Tee for 28 mm X 22 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 710.00 710.00
TOTAL 710.00 W X Y Z
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

18.93A.4 For 35 mm x 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3906 Reducing Tee for 35 mm X 15 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 900.00 900.00
TOTAL 900.00 W X Y Z
Add 1 % Water charges on "W" 9.00
TOTAL 909.00
Add GST on "X" (multiplying factor 0.1405) 127.71
TOTAL 1036.71
Add 15% CPOH on "Y" 155.51
TOTAL 1192.22
Add Cess @ 1% on "Z" 11.92
Cost of 1 no. 1204.14
Say 1204.15
18.93A.5 For 35 mm x 22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3907 Reducing Tee for 35 mm X 22 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 905.00 905.00
TOTAL 905.00 W X Y Z
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85

18.93A.6 For 35 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3908 Reducing Tee for 35 mm X 28 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 915.00 915.00
TOTAL 915.00 W X Y Z
Add 1 % Water charges on "W" 9.15
TOTAL 924.15
Add GST on "X" (multiplying factor 0.1405) 129.84
TOTAL 1053.99
Add 15% CPOH on "Y" 158.10
TOTAL 1212.09
Add Cess @ 1% on "Z" 12.12
Cost of 1 no. 1224.21
Say 1224.20

18.93A.7 For 42 mm x 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.

WXYZ
Details of cost for 1 no.
MATERIAL
3909 Reducing Tee for 42 mm X 22 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1280.00 1280.00
TOTAL 1280.00 W X Y Z
Add 1 % Water charges on "W" 12.80
TOTAL 1292.80
Add GST on "X" (multiplying factor 0.1405) 181.64
TOTAL 1474.44
Add 15% CPOH on "Y" 221.17
TOTAL 1695.60
Add Cess @ 1% on "Z" 16.96
Cost of 1 no. 1712.56
Say 1712.55

18.93A.8 For 42 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3910 Reducing Tee for 42 mm X 28 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1265.00 1265.00
TOTAL 1265.00 W X Y Z
Add 1 % Water charges on "W" 12.65
TOTAL 1277.65
Add GST on "X" (multiplying factor 0.1405) 179.51
TOTAL 1457.16
Add 15% CPOH on "Y" 218.57
TOTAL 1675.73
Add Cess @ 1% on "Z" 16.76
Cost of 1 no. 1692.49
Say 1692.50
18.93A.9 For 42 mm x 35 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3911 Reducing Tee for 42 mm X 35 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1290.00 1290.00
TOTAL 1290.00 W X Y Z
Add 1 % Water charges on "W" 12.90
TOTAL 1302.90
Add GST on "X" (multiplying factor 0.1405) 183.06
TOTAL 1485.96
Add 15% CPOH on "Y" 222.89
TOTAL 1708.85
Add Cess @ 1% on "Z" 17.09
Cost of 1 no. 1725.94
Say 1725.95

18.93A.10 For 54 mm x 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3912 Reducing Tee for 54 mm X 22 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1570.00 1570.00
TOTAL 1570.00 W X Y Z
Add 1 % Water charges on "W" 15.70
TOTAL 1585.70
Add GST on "X" (multiplying factor 0.1405) 222.79
TOTAL 1808.49
Add 15% CPOH on "Y" 271.27
TOTAL 2079.76
Add Cess @ 1% on "Z" 20.80
Cost of 1 no. 2100.56
Say 2100.55

18.93A.11 For 54 mm x 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3913 Reducing Tee for 54 mm X 28 mm outer dia SS pipe of grade

WXY
Z
316 conforming to IS 6911:2017 each 1.00 1540.00 1540.00
TOTAL 1540.00 W X Y
Add 1 % Water charges on "W" 15.40 Z
TOTAL 1555.40
Add GST on "X" (multiplying factor 0.1405) 218.53
TOTAL 1773.93
Add 15% CPOH on "Y" 266.09
TOTAL 2040.02
Add Cess @ 1% on "Z" 20.40
Cost of 1 no. 2060.42
Say 2060.40

18.93A.12 For 54 mm x 35 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3914 Reducing Tee for 54 mm X 35 mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1550.00 1550.00 W X Y
TOTAL 1550.00 Z
Add 1 % Water charges on "W" 15.50
TOTAL 1565.50
Add GST on "X" (multiplying factor 0.1405) 219.95
TOTAL 1785.45
Add 15% CPOH on "Y" 267.82
TOTAL 2053.27
Add Cess @ 1% on "Z" 20.53
Cost of 1 no. 2073.80
Say 2073.80
18.93A.13 For 54 mm x 42 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3915 Reducing Tee for 54mm X 42mm outer dia SS pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312 each 1.00 1500.00 1500.00
TOTAL 1500.00 W X Y
Add 1 % Water charges on "W" 15.00 Z
TOTAL 1515.00
Add GST on "X" (multiplying factor 0.1405) 212.86
TOTAL 1727.86
Add 15% CPOH on "Y" 259.18
TOTAL 1987.04
Add Cess @ 1% on "Z" 19.87
Cost of 1 no. 2006.91
Say 2006.90
18.94 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Male Thread Tee
18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm
nominal dia threaded each 1.00 185.00 185.00
TOTAL 185.00 W X Y
Z
Add 1 % Water charges on "W" 1.85
TOTAL 186.85
Add GST on "X" (multiplying factor 0.1405) 26.25
TOTAL 213.10
Add 15% CPOH on "Y" 31.97
TOTAL 245.07
Add Cess @ 1% on "Z" 2.45
Cost of 1 no. 247.52
Say 247.50

18.94.2 For 22.22 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8846 Stainless steel Male thread Tee for 22.22 mm outer dia X 15 mm

WXY
Z
nominal dia threaded each 1.00 215.00 215.00
TOTAL 215.00 W X Y
Add 1 % Water charges on "W" 2.15 Z
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost of 1 no. 287.66
Say 287.65

18.94.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8847 Stainless steel Male thread Tee for 22.22 mm outer dia X 20 mm
nominal dia threaded each 1.00 215.00 215.00
TOTAL 215.00 W X Y Z
Add 1 % Water charges on "W" 2.15
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost of 1 no. 287.66
Say 287.65
18.94.4 For 28.58 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8848 Stainless steel Male thread Tee for 28.58 mm outer dia X 15 mm
nominal dia threaded each 1.00 295.00 295.00
TOTAL 295.00 W X Y Z
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost of 1 no. 394.69
Say 394.70
18.94.5 For 28.58 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8849 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm
nominal dia threaded each 1.00 295.00 295.00
TOTAL 295.00 W X Y Z
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost of 1 no. 394.69
Say 394.70

18.94.6 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8850 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm
nominal dia threaded each 1.00 295.00 295.00
TOTAL 295.00
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost of 1 no. 394.69
Say 394.70

18.94.7 For 34.00 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8851 Stainless steel Male thread Tee for 34.00 mm outer dia X 15 mm
nominal dia threaded each 1.00 465.00 465.00
TOTAL 465.00 W X Y
Z
Add 1 % Water charges on "W" 4.65
TOTAL 469.65
Add GST on "X" (multiplying factor 0.1405) 65.99
TOTAL 535.64
Add 15% CPOH on "Y" 80.35
TOTAL 615.98
Add Cess @ 1% on "Z" 6.16
Cost of 1 no. 622.14
Say 622.15
18.94.8 For 34.00 mm outer dia x 20 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8852 Stainless steel Male thread Tee for 34.00 mm outer dia X 20 mm
nominal dia threaded each 1.00 465.00 465.00
TOTAL 465.00 W X Y
Z
Add 1 % Water charges on "W" 4.65
TOTAL 469.65
Add GST on "X" (multiplying factor 0.1405) 65.99
TOTAL 535.64
Add 15% CPOH on "Y" 80.35
TOTAL 615.98
Add Cess @ 1% on "Z" 6.16
Cost of 1 no. 622.14
Say 622.15

18.94.9 For 34.00 mm outer dia x 25 mm nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8853 Stainless steel Male thread Tee for 34.00 mm outer dia X 25 mm
nominal dia threaded each 1.00 465.00 465.00
TOTAL 465.00 W X Y
Add 1 % Water charges on "W" 4.65 Z
TOTAL 469.65
Add GST on "X" (multiplying factor 0.1405) 65.99
TOTAL 535.64
Add 15% CPOH on "Y" 80.35
TOTAL 615.98
Add Cess @ 1% on "Z" 6.16
Cost of 1 no. 622.14
Say 622.15

18.94.10 For 34.00 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8854 Stainless steel Male thread Tee for 34.00 mm outer dia X 32 mm
nominal dia threaded each 1.00 465.00 465.00
TOTAL 465.00
WXYZ
Add 1 % Water charges on "W" 4.65
TOTAL 469.65
Add GST on "X" (multiplying factor 0.1405) 65.99
TOTAL 535.64
Add 15% CPOH on "Y" 80.35
TOTAL 615.98
Add Cess @ 1% on "Z" 6.16
Cost of 1 no. 622.14
Say 622.15
18.94.11 For 42.70 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8855 Stainless steel Male thread Tee for 42.70 mm outer dia X 15 mm
nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00 W X Y Z
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95
18.94.12 For 42.70 mm outer dia x 20 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8856 Stainless steel Male thread Tee for 42.70 mm outer dia X 20 mm
nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

18.94.13 For 42.70 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8857 Stainless steel Male thread Tee for 42.70 mm outer dia X 25 mm
nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00 W X Y Z
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

18.94.14 For 42.70 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8858 Stainless steel Male thread Tee for 42.70 mm outer dia X 32 mm
nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00 W X Y Z
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

18.94.15 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
WXYZ

8859 Stainless steel Male thread Tee for 42.70 mm outer dia X 40 mm
nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95
18.94.16 For 48.60 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8860 Stainless steel Male thread Tee for 48.60 mm outer dia X 15 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00 W X Y
Z
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.94.17 For 48.60 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8861 Stainless steel Male thread Tee for 48.60 mm outer dia X 20 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00 W X Y
Add 1 % Water charges on "W" 8.95 Z
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.94.18 For 48.60 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8862 Stainless steel Male thread Tee for 48.60 mm outer dia X 25 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00 W X Y
Z
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.94.19 For 48.60 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8863 Stainless steel Male thread Tee for 48.60 mm outer dia X 32 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00 W X Y Z
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
WXYZ

TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45
18.94.20 For 48.60 mm outer dia x 40 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8864 Stainless steel Male thread Tee for 48.60 mm outer dia X 40 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00 W X Y Z
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45

18.94.21 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8865 Stainless steel Male thread Tee for 48.60 mm outer dia X 50 mm
nominal dia threaded each 1.00 895.00 895.00
TOTAL 895.00
WXYZ
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45
18.95 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Thread Tee
18.95.1 For 15.88 mm outer dia x15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15
mm nominal dia threaded each 1.00 185.00 185.00
TOTAL 185.00 W X Y Z
Add 1 % Water charges on "W" 1.85
TOTAL 186.85
Add GST on "X" (multiplying factor 0.1405) 26.25
TOTAL 213.10
Add 15% CPOH on "Y" 31.97
TOTAL 245.07
Add Cess @ 1% on "Z" 2.45
Cost of 1 no. 247.52
Say 247.50

18.95.2 For 22.22 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8867 Stainless steel Female thread Tee for 22.22 mm outer dia X 15
mm nominal dia threaded each 1.00 205.00 205.00
TOTAL 205.00
WXYZ
Add 1 % Water charges on "W" 2.05
TOTAL 207.05
Add GST on "X" (multiplying factor 0.1405) 29.09
TOTAL 236.14
WXYZ

Add 15% CPOH on "Y" 35.42


TOTAL 271.56
Add Cess @ 1% on "Z" 2.72
Cost of 1 no. 274.28
Say 274.30
18.95.3 For 22.22 mm outer dia x 20 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8868 Stainless steel Female thread Tee for 22.22 mm outer dia X 20
mm nominal dia threaded each 1.00 205.00 205.00
TOTAL 205.00 W X Y Z
Add 1 % Water charges on "W" 2.05
TOTAL 207.05
Add GST on "X" (multiplying factor 0.1405) 29.09
TOTAL 236.14
Add 15% CPOH on "Y" 35.42
TOTAL 271.56
Add Cess @ 1% on "Z" 2.72
Cost of 1 no. 274.28
Say 274.30

18.95.4 For 28.58 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8869 Stainless steel Female thread Tee for 28.58 mm outer dia X 15
mm nominal dia threaded each 1.00 275.00 275.00
TOTAL 275.00
Add 1 % Water charges on "W" 2.75
TOTAL 277.75
Add GST on "X" (multiplying factor 0.1405) 39.02
TOTAL 316.77
Add 15% CPOH on "Y" 47.52
TOTAL 364.29
Add Cess @ 1% on "Z" 3.64
Cost of 1 no. 367.93
Say 367.95

18.95.5 For 28.58 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8870 Stainless steel Female thread Tee for 28.58 mm outer dia X 20
mm nominal dia threaded each 1.00 275.00 275.00
TOTAL 275.00 W X Y
Z
Add 1 % Water charges on "W" 2.75
TOTAL 277.75
Add GST on "X" (multiplying factor 0.1405) 39.02
TOTAL 316.77
Add 15% CPOH on "Y" 47.52
TOTAL 364.29
Add Cess @ 1% on "Z" 3.64
Cost of 1 no. 367.93
Say 367.95

18.95.6 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8871 Stainless steel Female thread Tee for 28.58 mm outer dia X 25
mm nominal dia threaded each 1.00 275.00 275.00
TOTAL 275.00 W X Y
Add 1 % Water charges on "W" 2.75 Z
TOTAL 277.75
Add GST on "X" (multiplying factor 0.1405) 39.02
TOTAL 316.77
Add 15% CPOH on "Y" 47.52
TOTAL 364.29
Add Cess @ 1% on "Z" 3.64
Cost of 1 no. 367.93
Say 367.95
18.95.7 For 34.00 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8872 Stainless steel Female thread Tee for 34.00 mm outer dia X 15
mm nominal dia threaded each 1.00 445.00 445.00
TOTAL 445.00 W X Y
Z
Add 1 % Water charges on "W" 4.45
TOTAL 449.45
Add GST on "X" (multiplying factor 0.1405) 63.15
TOTAL 512.60
Add 15% CPOH on "Y" 76.89
TOTAL 589.49
Add Cess @ 1% on "Z" 5.89
Cost of 1 no. 595.38
Say 595.40

18.95.8 For 34.00 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8873 Stainless steel Female thread Tee for 34.00 mm outer dia X 20
mm nominal dia threaded each 1.00 445.00 445.00
TOTAL 445.00 W X Y Z
Add 1 % Water charges on "W" 4.45
TOTAL 449.45
Add GST on "X" (multiplying factor 0.1405) 63.15
TOTAL 512.60
Add 15% CPOH on "Y" 76.89
TOTAL 589.49
Add Cess @ 1% on "Z" 5.89
Cost of 1 no. 595.38
Say 595.40

18.95.9 For 34.00 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8874 Stainless steel Female thread Tee for 34.00 mm outer dia X 25
mm nominal dia threaded each 1.00 445.00 445.00
TOTAL 445.00
WXYZ
Add 1 % Water charges on "W" 4.45
TOTAL 449.45
Add GST on "X" (multiplying factor 0.1405) 63.15
TOTAL 512.60
Add 15% CPOH on "Y" 76.89
TOTAL 589.49
Add Cess @ 1% on "Z" 5.89
Cost of 1 no. 595.38
Say 595.40

18.95.10 For 34.00 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8875 Stainless steel Female thread Tee for 34.00 mm outer dia X 32
mm nominal dia threaded each 1.00 445.00 445.00
TOTAL 445.00 W X Y Z
Add 1 % Water charges on "W" 4.45
TOTAL 449.45
Add GST on "X" (multiplying factor 0.1405) 63.15
TOTAL 512.60
Add 15% CPOH on "Y" 76.89
TOTAL 589.49
Add Cess @ 1% on "Z" 5.89
Cost of 1 no. 595.38
Say 595.40
18.95.11 For 42.70 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8876 Stainless steel Female thread Tee for 42.70 mm outer dia X 15
mm nominal dia threaded each 1.00 700.00 700.00
WXYZ
TOTAL 700.00 W X Y Z
Add 1 % Water charges on "W" 7.00
TOTAL 707.00
Add GST on "X" (multiplying factor 0.1405) 99.33
TOTAL 806.33
Add 15% CPOH on "Y" 120.95
TOTAL 927.28
Add Cess @ 1% on "Z" 9.27
Cost of 1 no. 936.56
Say 936.55

18.95.12 For 42.70 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8877 Stainless steel Female thread Tee for 42.70 mm outer dia X 20
mm nominal dia threaded each 1.00 700.00 700.00
TOTAL 700.00
Add 1 % Water charges on "W" 7.00
TOTAL 707.00
Add GST on "X" (multiplying factor 0.1405) 99.33
TOTAL 806.33
Add 15% CPOH on "Y" 120.95
TOTAL 927.28
Add Cess @ 1% on "Z" 9.27
Cost of 1 no. 936.56
Say 936.55

18.95.13 For 42.70 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8878 Stainless steel Female thread Tee for 42.70 mm outer dia X 25
mm nominal dia threaded each 1.00 700.00 700.00
TOTAL 700.00 W X Y Z
Add 1 % Water charges on "W" 7.00
TOTAL 707.00
Add GST on "X" (multiplying factor 0.1405) 99.33
TOTAL 806.33
Add 15% CPOH on "Y" 120.95
TOTAL 927.28
Add Cess @ 1% on "Z" 9.27
Cost of 1 no. 936.56
Say 936.55

18.95.14 For 42.70 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8879 Stainless steel Female thread Tee for 42.70 mm outer dia X 32
mm nominal dia threaded each 1.00 700.00 700.00
TOTAL 700.00 W X Y
Z
Add 1 % Water charges on "W" 7.00
TOTAL 707.00
Add GST on "X" (multiplying factor 0.1405) 99.33
TOTAL 806.33
Add 15% CPOH on "Y" 120.95
TOTAL 927.28
Add Cess @ 1% on "Z" 9.27
Cost of 1 no. 936.56
Say 936.55
18.95.15 For 42.70 mm outer dia x 40 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8880 Stainless steel Female thread Tee for 42.70 mm outer dia X 40
mm nominal dia threaded each 1.00 700.00 700.00
TOTAL 700.00 W X Y
Z
Add 1 % Water charges on "W" 7.00
TOTAL 707.00
Add GST on "X" (multiplying factor 0.1405) 99.33
TOTAL 806.33
Add 15% CPOH on "Y" 120.95
WXY
Z

TOTAL 927.28
Add Cess @ 1% on "Z" 9.27
Cost of 1 no. 936.56
Say 936.55

18.95.16 For 48.60 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8881 Stainless steel Female thread Tee for 48.60 mm outer dia X 15
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00 W X Y
Add 1 % Water charges on "W" 9.05 Z
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85

18.95.17 For 48.60 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8882 Stainless steel Female thread Tee for 48.60 mm outer dia X 20
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00 W X Y Z
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85

18.95.18 For 48.60 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8883 Stainless steel Female thread Tee for 48.60 mm outer dia X 25
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85
18.95.19 For 48.60 mm outer dia x 32 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8884 Stainless steel Female thread Tee for 48.60 mm outer dia X 32
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85
18.95.20 For 48.60 mm outer dia x 40 mm nominal dia threaded

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8885 Stainless steel Female thread Tee for 48.60 mm outer dia X 40
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00 W X Y Z
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85

18.95.21 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8886 Stainless steel Female thread Tee for 48.60 mm outer dia X 50
mm nominal dia threaded each 1.00 905.00 905.00
TOTAL 905.00
Add 1 % Water charges on "W" 9.05
TOTAL 914.05
Add GST on "X" (multiplying factor 0.1405) 128.42
TOTAL 1042.47
Add 15% CPOH on "Y" 156.37
TOTAL 1198.85
Add Cess @ 1% on "Z" 11.99
Cost of 1 no. 1210.83
Say 1210.85

18.95A
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Female Thread Tee


18.95A.1 For 15 mm outer dia x 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3916 Stainless steel Female thread Tee for 15 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 560.00 560.00
TOTAL 560.00 W X Y Z
Add 1 % Water charges on "W" 5.60
TOTAL 565.60
Add GST on "X" (multiplying factor 0.1405) 79.47
TOTAL 645.07
Add 15% CPOH on "Y" 96.76
TOTAL 741.83
Add Cess @ 1% on "Z" 7.42
Cost of 1 no. 749.25
Say 749.25
18.95A.2 For 22mm outer dia x 1/2" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3917 Stainless steel Female thread Tee for 22 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 615.00 615.00
TOTAL 615.00 W X Y Z
Add 1 % Water charges on "W" 6.15
TOTAL 621.15
Add GST on "X" (multiplying factor 0.1405) 87.27
TOTAL 708.42
Add 15% CPOH on "Y" 106.26
TOTAL 814.68
Add Cess @ 1% on "Z" 8.15
Cost of 1 no. 822.83
Say 822.85
18.95A.3 For 22mm outer dia x 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3918 Stainless steel Female thread Tee for 22 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 690.00 690.00
TOTAL 690.00 W X Y Z
Add 1 % Water charges on "W" 6.90
TOTAL 696.90
Add GST on "X" (multiplying factor 0.1405) 97.91
TOTAL 794.81
Add 15% CPOH on "Y" 119.22
TOTAL 914.04
Add Cess @ 1% on "Z" 9.14
Cost of 1 no. 923.18
Say 923.20

18.95A.4 For 28 mm outer dia x 1/2" nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3919 Stainless steel Female thread Tee for 28 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 730.00 730.00
TOTAL 730.00 W X Y Z
Add 1 % Water charges on "W" 7.30
TOTAL 737.30
Add GST on "X" (multiplying factor 0.1405) 103.59
TOTAL 840.89
Add 15% CPOH on "Y" 126.13
TOTAL 967.02
Add Cess @ 1% on "Z" 9.67
Cost of 1 no. 976.69
Say 976.70

18.95A.5 For 28 mm outer dia x 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3920 Stainless steel Female thread Tee for 28 mm outer dia X 3/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 755.00 755.00 W X Y
TOTAL 755.00 Z
Add 1 % Water charges on "W" 7.55
TOTAL 762.55
Add GST on "X" (multiplying factor 0.1405) 107.14
TOTAL 869.69
Add 15% CPOH on "Y" 130.45
TOTAL 1000.14
Add Cess @ 1% on "Z" 10.00
Cost of 1 no. 1010.14
Say 1010.15
18.95A.6 For 28 mm outer dia x 1" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3921 Stainless steel Female thread Tee for 28 mm outer dia X 1"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 840.00 840.00 W X Y
TOTAL 840.00 Z
Add 1 % Water charges on "W" 8.40
TOTAL 848.40
Add GST on "X" (multiplying factor 0.1405) 119.20
TOTAL 967.60
Add 15% CPOH on "Y" 145.14
TOTAL 1112.74
Add Cess @ 1% on "Z" 11.13
Cost of 1 no. 1123.87
Say 1123.85

18.95A.7 For 35 mm outer dia x 1/2" nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3922 Stainless steel Female thread Tee for 35 mm outer dia X 1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 845.00 845.00 W X Y
TOTAL 845.00 Z
Add 1 % Water charges on "W" 8.45
TOTAL 853.45
Add GST on "X" (multiplying factor 0.1405) 119.91
TOTAL 973.36
Add 15% CPOH on "Y" 146.00
TOTAL 1119.36
Add Cess @ 1% on "Z" 11.19
Cost of 1 no. 1130.56
Say 1130.55

18.95A.8 For 35 mm outer dia x 1-1/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3923 Stainless steel Female thread Tee for 35 mm outer dia X 1-1/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 1159.00 1159.00
WXY
TOTAL 1159.00 Z
Add 1 % Water charges on "W" 11.59
TOTAL 1170.59
Add GST on "X" (multiplying factor 0.1405) 164.47
TOTAL 1335.06
Add 15% CPOH on "Y" 200.26
TOTAL 1535.32
Add Cess @ 1% on "Z" 15.35
Cost of 1 no. 1550.67
Say 1550.65

18.95A.9 For 42 mm outer dia x 1-1/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3924 Stainless steel Female thread Tee for 42 mm outer dia X 1-1/4"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 1346.00 1346.00
TOTAL 1346.00 W X Y Z
Add 1 % Water charges on "W" 13.46
TOTAL 1359.46
Add GST on "X" (multiplying factor 0.1405) 191.00
TOTAL 1550.46
Add 15% CPOH on "Y" 232.57
TOTAL 1783.03
Add Cess @ 1% on "Z" 17.83
Cost of 1 no. 1800.86
Say 1800.85
18.95A.10 For 54 mm outer dia x 1-1/2" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3925 Stainless steel Female thread Tee for 54 mm outer dia X 1-1/2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 1920.00 1920.00
TOTAL 1920.00 W X Y Z
Add 1 % Water charges on "W" 19.20
TOTAL 1939.20
Add GST on "X" (multiplying factor 0.1405) 272.46
TOTAL 2211.66
Add 15% CPOH on "Y" 331.75
TOTAL 2543.41
Add Cess @ 1% on "Z" 25.43
Cost of 1 no. 2568.84
Say 2568.85

18.95A.11 For 54 mm outer dia x 2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.

WXY
Z
MATERIAL
3926 Stainless steel Female thread Tee for 54 mm outer dia X 2"
nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 2307.00 2307.00
WXY
TOTAL 2307.00 Z
Add 1 % Water charges on "W" 23.07
TOTAL 2330.07
Add GST on "X" (multiplying factor 0.1405) 327.37
TOTAL 2657.44
Add 15% CPOH on "Y" 398.62
TOTAL 3056.06
Add Cess @ 1% on "Z" 30.56
Cost of 1 no. 3086.62
Say 3086.60
18.96 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Thread Connector/ Adapter
18.96.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8887 Stainless steel Female threaded Connector/Adapter for 15.88
mm outer dia X 15 mm nominal dia threaded each 1.00 195.00 195.00
TOTAL 195.00 W X Y
Z
Add 1 % Water charges on "W" 1.95
TOTAL 196.95
Add GST on "X" (multiplying factor 0.1405) 27.67
TOTAL 224.62
Add 15% CPOH on "Y" 33.69
TOTAL 258.31
Add Cess @ 1% on "Z" 2.58
Cost of 1 no. 260.90
Say 260.90

18.96.2 For 22.22 mm outer dia x 15 mmnominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8888 Stainless steel Female threaded Connector/Adapter for 22.22
mm outer dia X 15 mm nominal dia threaded each 1.00 230.00 230.00
TOTAL 230.00
Add 1 % Water charges on "W" 2.30
TOTAL 232.30
Add GST on "X" (multiplying factor 0.1405) 32.64
TOTAL 264.94
Add 15% CPOH on "Y" 39.74
TOTAL 304.68
Add Cess @ 1% on "Z" 3.05
Cost of 1 no. 307.73
Say 307.75
18.96.3 For 22.22 mm outer dia x 20 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8889 Stainless steel Female threaded Connector/Adapter for 22.22
mm outer dia X 20 mm nominal dia threaded each 1.00 240.00 240.00
TOTAL 240.00
Add 1 % Water charges on "W" 2.40
TOTAL 242.40
Add GST on "X" (multiplying factor 0.1405) 34.06
TOTAL 276.46
Add 15% CPOH on "Y" 41.47
TOTAL 317.93
Add Cess @ 1% on "Z" 3.18
Cost of 1 no. 321.11
Say 321.10

18.96.4 For 28.58 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL

WXYZ
8890 Stainless steel Female threaded Connector/Adapter for 28.58
mm outer dia X 15 mm nominal dia threaded each 1.00 277.00 277.00
TOTAL 277.00 W X Y Z
Add 1 % Water charges on "W" 2.77
TOTAL 279.77
Add GST on "X" (multiplying factor 0.1405) 39.31
TOTAL 319.08
Add 15% CPOH on "Y" 47.86
TOTAL 366.94
Add Cess @ 1% on "Z" 3.67
Cost of 1 no. 370.61
Say 370.60

18.96.5 For 28.58 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8891 Stainless steel Female threaded Connector/Adapter for 28.58
mm outer dia X 20 mm nominal dia threaded each 1.00 290.00 290.00
TOTAL 290.00 W X Y
Add 1 % Water charges on "W" 2.90 Z
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00

18.96.6 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8892 Stainless steel Female threaded Connector/Adapter for 28.58
mm outer dia X 25 mm nominal dia threaded each 1.00 355.00 355.00
TOTAL 355.00 W X Y
Z
Add 1 % Water charges on "W" 3.55
TOTAL 358.55
Add GST on "X" (multiplying factor 0.1405) 50.38
TOTAL 408.93
Add 15% CPOH on "Y" 61.34
TOTAL 470.27
Add Cess @ 1% on "Z" 4.70
Cost of 1 no. 474.97
Say 474.95
18.96.7 For 34.00 mm outer dia x 25 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8893 Stainless steel Female threaded Connector/Adapter for 34.00
mm outer dia X 25 mm nominal dia threaded each 1.00 410.00 410.00
TOTAL 410.00 W X Y
Z
Add 1 % Water charges on "W" 4.10
TOTAL 414.10
Add GST on "X" (multiplying factor 0.1405) 58.18
TOTAL 472.28
Add 15% CPOH on "Y" 70.84
TOTAL 543.12
Add Cess @ 1% on "Z" 5.43
Cost of 1 no. 548.55
Say 548.55

18.96.8 For 34.00 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8894 Stainless steel Female threaded Connector/Adapter for 34.00
mm outer dia X 32 mm nominal dia threaded each 1.00 540.00 540.00
TOTAL 540.00
Add 1 % Water charges on "W" 5.40
TOTAL 545.40
Add GST on "X" (multiplying factor 0.1405) 76.63
TOTAL 622.03
Add 15% CPOH on "Y" 93.30
TOTAL 715.33
Add Cess @ 1% on "Z" 7.15
Cost of 1 no. 722.49
Say 722.50

18.96.9 For 42.70 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8895 Stainless steel Female threaded Connector/Adapter for 42.70
mm outer dia X 32 mm nominal dia threaded each 1.00 595.00 595.00
TOTAL 595.00 W X Y Z
Add 1 % Water charges on "W" 5.95
TOTAL 600.95
Add GST on "X" (multiplying factor 0.1405) 84.43
TOTAL 685.38
Add 15% CPOH on "Y" 102.81
TOTAL 788.19
Add Cess @ 1% on "Z" 7.88
Cost of 1 no. 796.07
Say 796.05

18.96.10 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8896 Stainless steel Female threaded Connector/Adapter for 42.70
mm outer dia X 40 mm nominal dia threaded each 1.00 695.00 695.00
TOTAL 695.00
Add 1 % Water charges on "W" 6.95
TOTAL 701.95
Add GST on "X" (multiplying factor 0.1405) 98.62
TOTAL 800.57
Add 15% CPOH on "Y" 120.09
TOTAL 920.66
Add Cess @ 1% on "Z" 9.21
Cost of 1 no. 929.87
Say 929.85
18.96.11 For 48.60 mm outer dia x 40 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8897 Stainless steel Female threaded Connector/Adapter for 48.60
mm outer dia X 40 mm nominal dia threaded each 1.00 845.00 845.00
TOTAL 845.00 W X Y Z
Add 1 % Water charges on "W" 8.45
TOTAL 853.45
Add GST on "X" (multiplying factor 0.1405) 119.91
TOTAL 973.36
Add 15% CPOH on "Y" 146.00
TOTAL 1119.36
Add Cess @ 1% on "Z" 11.19
Cost of 1 no. 1130.56
Say 1130.55

18.96.12 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8898 Stainless steel Female threaded Connector/Adapter for 48.60
mm outer dia X 50 mm nominal dia threaded each 1.00 975.00 975.00
TOTAL 975.00
WXYZ
Add 1 % Water charges on "W" 9.75
TOTAL 984.75
Add GST on "X" (multiplying factor 0.1405) 138.36
TOTAL 1123.11
Add 15% CPOH on "Y" 168.47
TOTAL 1291.57
Add Cess @ 1% on "Z" 12.92
Cost of 1 no. 1304.49
Say 1304.50
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.96A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Female Thread Connector/ Adapter


18.96A.1 For 15 mm outer dia x 1/2" mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3927 Stainless steel Female threaded Connector/Adapter for 15 mm
outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 440.00 440.00
TOTAL 440.00 W X Y Z
Add 1 % Water charges on "W" 4.40
TOTAL 444.40
Add GST on "X" (multiplying factor 0.1405) 62.44
TOTAL 506.84
Add 15% CPOH on "Y" 76.03
TOTAL 582.86
Add Cess @ 1% on "Z" 5.83
Cost of 1 no. 588.69
Say 588.70

18.96A.2 For 22 mm outer dia x 1/2" mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3928 Stainless steel Female threaded Connector/Adapter for 22 mm
outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 495.00 495.00
TOTAL 495.00 W X Y Z
Add 1 % Water charges on "W" 4.95
TOTAL 499.95
Add GST on "X" (multiplying factor 0.1405) 70.24
TOTAL 570.19
Add 15% CPOH on "Y" 85.53
TOTAL 655.72
Add Cess @ 1% on "Z" 6.56
Cost of 1 no. 662.28
Say 662.30
18.96A.3 For 22 mm outer dia x 3/4" mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3929 Stainless steel Female threaded Connector/Adapter for 22 mm
outer dia X 3/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 580.00 580.00
TOTAL 580.00 W X Y Z
Add 1 % Water charges on "W" 5.80
TOTAL 585.80
Add GST on "X" (multiplying factor 0.1405) 82.30
TOTAL 668.10
Add 15% CPOH on "Y" 100.22
TOTAL 768.32
Add Cess @ 1% on "Z" 7.68
Cost of 1 no. 776.00
Say 776.00

18.96A.4 For 28 mm outer dia X 1" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3930 Stainless steel Female threaded Connector/Adapter for 28 mm
outer dia X 1" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 955.00 955.00
TOTAL 955.00 W X Y Z
Add 1 % Water charges on "W" 9.55
TOTAL 964.55
Add GST on "X" (multiplying factor 0.1405) 135.52
TOTAL 1100.07
Add 15% CPOH on "Y" 165.01
WXYZ

TOTAL 1265.08
Add Cess @ 1% on "Z" 12.65
Cost of 1 no. 1277.73
Say 1277.75

18.96A.5 For 35 mm outer dia X 1-1/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3931 Stainless steel Female threaded Connector/Adapter for 35 mm
outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1020.00 1020.00
TOTAL 1020.00 W X Y Z
Add 1 % Water charges on "W" 10.20
TOTAL 1030.20
Add GST on "X" (multiplying factor 0.1405) 144.74
TOTAL 1174.94
Add 15% CPOH on "Y" 176.24
TOTAL 1351.18
Add Cess @ 1% on "Z" 13.51
Cost of 1 no. 1364.70
Say 1364.70

18.96A.6 For 42 mm outer dia X 1-1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3932 Stainless steel Female threaded Connector/Adapter for 42 mm
outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1565.00 1565.00
TOTAL 1565.00 W X Y Z
Add 1 % Water charges on "W" 15.65
TOTAL 1580.65
Add GST on "X" (multiplying factor 0.1405) 222.08
TOTAL 1802.73
Add 15% CPOH on "Y" 270.41
TOTAL 2073.14
Add Cess @ 1% on "Z" 20.73
Cost of 1 no. 2093.87
Say 2093.85
18.96A.7 For 54 mm outer dia X 2" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3933 Stainless steel Female threaded Connector/Adapter for 54 mm
outer dia X 2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 2400.00 2400.00 W X Y
TOTAL 2400.00 Z
Add 1 % Water charges on "W" 24.00
TOTAL 2424.00
Add GST on "X" (multiplying factor 0.1405) 340.57
TOTAL 2764.57
Add 15% CPOH on "Y" 414.69
TOTAL 3179.26
Add Cess @ 1% on "Z" 31.79
Cost of 1 no. 3211.05
Say 3211.05
18.97 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Male Thread Connector/ Adapter


18.97.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8899 Stainless steel Male threaded Connector/ Adapter for 15.88 mm
outer dia X 15 mm nominal dia threaded each 1.00 195.00 195.00
TOTAL 195.00 W X Y Z
Add 1 % Water charges on "W" 1.95
TOTAL 196.95
WXYZ

Add GST on "X" (multiplying factor 0.1405) 27.67


TOTAL 224.62
Add 15% CPOH on "Y" 33.69
TOTAL 258.31
Add Cess @ 1% on "Z" 2.58
Cost of 1 no. 260.90
Say 260.90

18.97.2 For 22.22 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8900 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal dia threaded each 1.00 230.00 230.00
TOTAL 230.00
WXYZ
Add 1 % Water charges on "W" 2.30
TOTAL 232.30
Add GST on "X" (multiplying factor 0.1405) 32.64
TOTAL 264.94
Add 15% CPOH on "Y" 39.74
TOTAL 304.68
Add Cess @ 1% on "Z" 3.05
Cost of 1 no. 307.73
Say 307.75

18.97.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8901 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 20mm nominal dia threaded each 1.00 255.00 255.00
TOTAL 255.00 W X Y
Add 1 % Water charges on "W" 2.55 Z
TOTAL 257.55
Add GST on "X" (multiplying factor 0.1405) 36.19
TOTAL 293.74
Add 15% CPOH on "Y" 44.06
TOTAL 337.80
Add Cess @ 1% on "Z" 3.38
Cost of 1 no. 341.17
Say 341.15
18.97.4 For 28.58 mm outer dia x 20 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8902 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal dia threaded each 1.00 325.00 325.00
TOTAL 325.00 W X Y
Z
Add 1 % Water charges on "W" 3.25
TOTAL 328.25
Add GST on "X" (multiplying factor 0.1405) 46.12
TOTAL 374.37
Add 15% CPOH on "Y" 56.16
TOTAL 430.52
Add Cess @ 1% on "Z" 4.31
Cost of 1 no. 434.83
Say 434.85

18.97.5 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8903 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal dia threaded each 1.00 325.00 325.00
TOTAL 325.00 W X Y
Z
Add 1 % Water charges on "W" 3.25
TOTAL 328.25
Add GST on "X" (multiplying factor 0.1405) 46.12
TOTAL 374.37
Add 15% CPOH on "Y" 56.16
TOTAL 430.52
Add Cess @ 1% on "Z" 4.31
Cost of 1 no. 434.83
Say 434.85

18.97.6 For 34.00 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8904 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 25 mm nominal dia threaded each 1.00 475.00 475.00
TOTAL 475.00
Add 1 % Water charges on "W" 4.75
TOTAL 479.75
Add GST on "X" (multiplying factor 0.1405) 67.40
TOTAL 547.15
Add 15% CPOH on "Y" 82.07
TOTAL 629.23
Add Cess @ 1% on "Z" 6.29
Cost of 1 no. 635.52
Say 635.50

18.97.7 For 34.00 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8905 Stainless steel Male threaded Connector/Adapter for 34.00 mm
outer dia X 32 mm nominal dia threaded each 1.00 565.00 565.00
TOTAL 565.00 W X Y Z
Add 1 % Water charges on "W" 5.65
TOTAL 570.65
Add GST on "X" (multiplying factor 0.1405) 80.18
TOTAL 650.83
Add 15% CPOH on "Y" 97.62
TOTAL 748.45
Add Cess @ 1% on "Z" 7.48
Cost of 1 no. 755.93
Say 755.95
18.97.8 For 42.70 mm outer dia x 32 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8906 Stainless steel Male threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal dia threaded each 1.00 649.00 649.00
TOTAL 649.00 W X Y Z
Add 1 % Water charges on "W" 6.49
TOTAL 655.49
Add GST on "X" (multiplying factor 0.1405) 92.10
TOTAL 747.59
Add 15% CPOH on "Y" 112.14
TOTAL 859.72
Add Cess @ 1% on "Z" 8.60
Cost of 1 no. 868.32
Say 868.30

18.97.9 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8907 Stainless steel Male threaded Connector/Adapter for 42.70 mm
outer dia X 40 mm nominal dia threaded each 1.00 730.00 730.00
TOTAL 730.00
Add 1 % Water charges on "W" 7.30
TOTAL 737.30
Add GST on "X" (multiplying factor 0.1405) 103.59
TOTAL 840.89
Add 15% CPOH on "Y" 126.13
TOTAL 967.02
Add Cess @ 1% on "Z" 9.67
Cost of 1 no. 976.69
Say 976.70

18.97.10 For 48.60 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.

WXYZ
MATERIAL
8908 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal dia threaded each 1.00 850.00 850.00
TOTAL 850.00 W X Y Z
Add 1 % Water charges on "W" 8.50
TOTAL 858.50
Add GST on "X" (multiplying factor 0.1405) 120.62
TOTAL 979.12
Add 15% CPOH on "Y" 146.87
TOTAL 1125.99
Add Cess @ 1% on "Z" 11.26
Cost of 1 no. 1137.25
Say 1137.25

18.97.11 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8909 Stainless steel Male threaded Connector/Adapter for 48.60 mm
outer dia X 50 nominal dia threaded each 1.00 1140.00 1140.00
TOTAL 1140.00 W X Y
Add 1 % Water charges on "W" 11.40 Z
TOTAL 1151.40
Add GST on "X" (multiplying factor 0.1405) 161.77
TOTAL 1313.17
Add 15% CPOH on "Y" 196.98
TOTAL 1510.15
Add Cess @ 1% on "Z" 15.10
Cost of 1 no. 1525.25
Say 1525.25

Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
18.97A V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
18.97A.1 Male Thread Connector/ Adapter
For 15 mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3934 Stainless steel Male threaded Connector/ Adapter for 15 mm
outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 405.00 405.00 W X Y Z
TOTAL 405.00
Add 1 % Water charges on "W" 4.05
TOTAL 409.05
Add GST on "X" (multiplying factor 0.1405) 57.47
TOTAL 466.52
Add 15% CPOH on "Y" 69.98
TOTAL 536.50
Add Cess @ 1% on "Z" 5.36
Cost of 1 no. 541.86
Say 541.85

18.97A.2 For 22 mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3935 Stainless steel Male threaded Connector/ Adapter for 22 mm
outer dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 480.00 480.00
WXYZ
TOTAL 480.00
Add 1 % Water charges on "W" 4.80
TOTAL 484.80
Add GST on "X" (multiplying factor 0.1405) 68.11
WXYZ

TOTAL 552.91
Add 15% CPOH on "Y" 82.94
TOTAL 635.85
Add Cess @ 1% on "Z" 6.36
Cost of 1 no. 642.21
Say 642.20

18.97A.3 For 22 mm outer dia X 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3936 Stainless steel Male threaded Connector/ Adapter for 22 mm
outer dia X 3/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 505.00 505.00
WXYZ
TOTAL 505.00
Add 1 % Water charges on "W" 5.05
TOTAL 510.05
Add GST on "X" (multiplying factor 0.1405) 71.66
TOTAL 581.71
Add 15% CPOH on "Y" 87.26
TOTAL 668.97
Add Cess @ 1% on "Z" 6.69
Cost of 1 no. 675.66
Say 675.65
18.97A.4 For 28 mm outer dia X 1" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3937 Stainless steel Male threaded Connector/ Adapter for 28 mm
outer dia X 1" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 665.00 665.00 W X Y
TOTAL 665.00 Z
Add 1 % Water charges on "W" 6.65
TOTAL 671.65
Add GST on "X" (multiplying factor 0.1405) 94.37
TOTAL 766.02
Add 15% CPOH on "Y" 114.90
TOTAL 880.92
Add Cess @ 1% on "Z" 8.81
Cost of 1 no. 889.73
Say 889.75

18.97A.5 For 35 mm outer dia X 1-1/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3938 Stainless steel Male threaded Connector/ Adapter for 35 mm
outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 970.00 970.00 W X Y
TOTAL 970.00 Z
Add 1 % Water charges on "W" 9.70
TOTAL 979.70
Add GST on "X" (multiplying factor 0.1405) 137.65
TOTAL 1117.35
Add 15% CPOH on "Y" 167.60
TOTAL 1284.95
Add Cess @ 1% on "Z" 12.85
Cost of 1 no. 1297.80
Say 1297.80

18.97A.6 For 42 mm outer dia X 1-1/2"nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3939 Stainless steel Male threaded Connector/ Adapter for 42 mm
outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1415.00 1415.00 W X Y
TOTAL 1415.00 Z
Add 1 % Water charges on "W" 14.15
TOTAL 1429.15
Add GST on "X" (multiplying factor 0.1405) 200.80
WXY
Z

TOTAL 1629.95
Add 15% CPOH on "Y" 244.49
TOTAL 1874.44
Add Cess @ 1% on "Z" 18.74
Cost of 1 no. 1893.18
Say 1893.20

18.97A.7 For 54 mm outer dia X 2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3940 Stainless steel Male threaded Connector/ Adapter for 54 mm
outer dia X 2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1895.00 1895.00 W X Y
TOTAL 1895.00 Z
Add 1 % Water charges on "W" 18.95
TOTAL 1913.95
Add GST on "X" (multiplying factor 0.1405) 268.91
TOTAL 2182.86
Add 15% CPOH on "Y" 327.43
TOTAL 2510.29
Add Cess @ 1% on "Z" 25.10
Cost of 1 no. 2535.39
Say 2535.40
18.98 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Valve Connector
18.98.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 mm
nominal dia threaded each 1.00 235.00 235.00
TOTAL 235.00 W X Y
Add 1 % Water charges on "W" 2.35 Z
TOTAL 237.35
Add GST on "X" (multiplying factor 0.1405) 33.35
TOTAL 270.70
Add 15% CPOH on "Y" 40.60
TOTAL 311.30
Add Cess @ 1% on "Z" 3.11
Cost of 1 no. 314.42
Say 314.40

18.98.2 For 22.22 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8911 Stainless steel Valve Connector for 22.22 mm outer dia X 15 mm
nominal dia threaded each 1.00 280.00 280.00
TOTAL 280.00 W X Y Z
Add 1 % Water charges on "W" 2.80
TOTAL 282.80
Add GST on "X" (multiplying factor 0.1405) 39.73
TOTAL 322.53
Add 15% CPOH on "Y" 48.38
TOTAL 370.91
Add Cess @ 1% on "Z" 3.71
Cost of 1 no. 374.62
Say 374.60

18.98.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8912 Stainless steel Valve Connector for 22.22 mm outer dia X 20 mm
nominal dia threaded each 1.00 310.00 310.00
TOTAL 310.00
Add 1 % Water charges on "W" 3.10
TOTAL 313.10
Add GST on "X" (multiplying factor 0.1405) 43.99
TOTAL 357.09
Add 15% CPOH on "Y" 53.56
TOTAL 410.65
Add Cess @ 1% on "Z" 4.11
Cost of 1 no. 414.76
Say 414.75

18.98.4 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8913 Stainless steel Valve Connector for 28.58 mm outer dia X 25 mm
nominal dia threaded each 1.00 425.00 425.00
TOTAL 425.00 W X Y
Z
Add 1 % Water charges on "W" 4.25
TOTAL 429.25
Add GST on "X" (multiplying factor 0.1405) 60.31
TOTAL 489.56
Add 15% CPOH on "Y" 73.43
TOTAL 562.99
Add Cess @ 1% on "Z" 5.63
Cost of 1 no. 568.62
Say 568.60
18.98.5 For 34.00 mm outer dia x 32 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8914 Stainless steel Valve Connector for 34.00 mm outer dia X 32 mm
nominal dia threaded each 1.00 645.00 645.00
TOTAL 645.00 W X Y
Add 1 % Water charges on "W" 6.45 Z
TOTAL 651.45
Add GST on "X" (multiplying factor 0.1405) 91.53
TOTAL 742.98
Add 15% CPOH on "Y" 111.45
TOTAL 854.43
Add Cess @ 1% on "Z" 8.54
Cost of 1 no. 862.97
Say 862.95

18.98.6 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8915 Stainless steel Valve Connector for 42.70 mm outer dia X 40 mm
nominal dia threaded each 1.00 880.00 880.00
TOTAL 880.00 W X Y
Z
Add 1 % Water charges on "W" 8.80
TOTAL 888.80
Add GST on "X" (multiplying factor 0.1405) 124.88
TOTAL 1013.68
Add 15% CPOH on "Y" 152.05
TOTAL 1165.73
Add Cess @ 1% on "Z" 11.66
Cost of 1 no. 1177.39
Say 1177.40

18.98.7 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8916 Stainless steel Valve Connector for 48.60 mm outer dia X 50 mm
nominal dia threaded each 1.00 1210.00 1210.00
TOTAL 1210.00
Add 1 % Water charges on "W" 12.10
TOTAL 1222.10
Add GST on "X" (multiplying factor 0.1405) 171.71
TOTAL 1393.81
Add 15% CPOH on "Y" 209.07
TOTAL 1602.88
Add Cess @ 1% on "Z" 16.03
Cost of 1 no. 1618.90
Say 1618.90
18.99 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Threaded Elbow 90°
18.99.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8917 SS Female Threaded Elbow 90° for 15.88 mm outer dia X 15
mm nominal dia threaded each 1.00 160.00 160.00
TOTAL 160.00 W X Y
Add 1 % Water charges on "W" 1.60 Z
TOTAL 161.60
Add GST on "X" (multiplying factor 0.1405) 22.70
TOTAL 184.30
Add 15% CPOH on "Y" 27.65
TOTAL 211.95
Add Cess @ 1% on "Z" 2.12
Cost of 1 no. 214.07
Say 214.05
18.99.2 For 22.22 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8918 Stainless steel Female Threaded Elbow 90° for 22.22 mm outer
dia X 15 mm nominal dia threaded each 1.00 215.00 215.00
TOTAL 215.00
Add 1 % Water charges on "W" 2.15
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost of 1 no. 287.66
Say 287.65

18.99.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8919 Stainless steel Female Threaded Elbow 90° for 22.22 mm outer
dia X 20 mm nominal dia threaded each 1.00 215.00 215.00
TOTAL 215.00 W X Y Z
Add 1 % Water charges on "W" 2.15
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost of 1 no. 287.66
Say 287.65

18.99.4 For 25.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8920 Stainless steel Female Threaded Elbow 90° for 25.58 mm outer
dia X 25 mm nominal dia threaded each 1.00 215.00 215.00
TOTAL 215.00
Add 1 % Water charges on "W" 2.15
TOTAL 217.15
Add GST on "X" (multiplying factor 0.1405) 30.51
TOTAL 247.66
Add 15% CPOH on "Y" 37.15
TOTAL 284.81
Add Cess @ 1% on "Z" 2.85
Cost for 1 no. 287.66
Say 287.65
18.99.5 For 34.00 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8921 Stainless steel Female Threaded Elbow 90° for 34.00 mm outer
dia X 32 mm nominal dia threaded each 1.00 295.00 295.00
TOTAL 295.00 W X Y Z
Add 1 % Water charges on "W" 2.95
TOTAL 297.95
Add GST on "X" (multiplying factor 0.1405) 41.86
TOTAL 339.81
Add 15% CPOH on "Y" 50.97
TOTAL 390.78
Add Cess @ 1% on "Z" 3.91
Cost for 1 no. 394.69
Say 394.70
18.99.6 For 42.70 mm outer dia x 32 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8922 Stainless steel Female Threaded Elbow 90° for 42.70 mm outer
dia X 32 mm nominal dia threaded each 1.00 480.00 480.00
TOTAL 480.00
Add 1 % Water charges on "W" 4.80
TOTAL 484.80
Add GST on "X" (multiplying factor 0.1405) 68.11
TOTAL 552.91
Add 15% CPOH on "Y" 82.94
TOTAL 635.85
Add Cess @ 1% on "Z" 6.36
Cost of 1 no. 642.21
Say 642.20

18.99.7 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8923 Stainless steel Female Threaded Elbow 90° for 42.70 mm outer
dia X40 mm nominal dia threaded each 1.00 480.00 480.00
TOTAL 480.00 W X Y
Z
Add 1 % Water charges on "W" 4.80
TOTAL 484.80
Add GST on "X" (multiplying factor 0.1405) 68.11
TOTAL 552.91
Add 15% CPOH on "Y" 82.94
TOTAL 635.85
Add Cess @ 1% on "Z" 6.36
Cost of 1 no. 642.21
Say 642.20

18.99.8 For 48.60 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8924 Stainless steel Female Threaded Elbow 90° for 48.60 mm outer
dia X 40 mm nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00 W X Y
Add 1 % Water charges on "W" 7.10 Z
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

18.99.9 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL

WXY
Z
8925 Stainless steel Female Threaded Elbow 90° for 48.60 mm outer
dia X 50 mm nominal dia threaded each 1.00 710.00 710.00
TOTAL 710.00 W X Y
Z
Add 1 % Water charges on "W" 7.10
TOTAL 717.10
Add GST on "X" (multiplying factor 0.1405) 100.75
TOTAL 817.85
Add 15% CPOH on "Y" 122.68
TOTAL 940.53
Add Cess @ 1% on "Z" 9.41
Cost of 1 no. 949.94
Say 949.95

Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
18.99A V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
18.99A.1 Female Threaded Elbow 90°
For 15 mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3941 Stainless steel Female Threaded Elbow 90° for 15 mm outer dia
X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 640.00 640.00
TOTAL 640.00 W X Y Z
Add 1 % Water charges on "W" 6.40
TOTAL 646.40
Add GST on "X" (multiplying factor 0.1405) 90.82
TOTAL 737.22
Add 15% CPOH on "Y" 110.58
TOTAL 847.80
Add Cess @ 1% on "Z" 8.48
Cost of 1 no. 856.28
Say 856.30

18.99A.2 For 22 mm outer dia X 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3942 Stainless steel Female Threaded Elbow 90° for 22 mm outer dia
X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 860.00 860.00 W X Y
TOTAL 860.00 Z
Add 1 % Water charges on "W" 8.60
TOTAL 868.60
Add GST on "X" (multiplying factor 0.1405) 122.04
TOTAL 990.64
Add 15% CPOH on "Y" 148.60
TOTAL 1139.23
Add Cess @ 1% on "Z" 11.39
Cost of 1 no. 1150.63
Say 1150.65

18.99A.3 For 28mm outer dia X 1" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3943 Stainless steel Female Threaded Elbow 90° for 28mm outer dia
X 1" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 1180.00 1180.00
TOTAL 1180.00 W X Y Z
Add 1 % Water charges on "W" 11.80
TOTAL 1191.80
Add GST on "X" (multiplying factor 0.1405) 167.45
TOTAL 1359.25
WXYZ

Add 15% CPOH on "Y" 203.89


TOTAL 1563.14
Add Cess @ 1% on "Z" 15.63
Cost for 1 no. 1578.77
Say 1578.75
18.99A.4 For 35mm outer dia X 1-1/4" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3944 Stainless steel Female Threaded Elbow 90° for 35mm outer dia
X 1-1/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 1917.00 1917.00
WXY
TOTAL 1917.00 Z
Add 1 % Water charges on "W" 19.17
TOTAL 1936.17
Add GST on "X" (multiplying factor 0.1405) 272.03
TOTAL 2208.20
Add 15% CPOH on "Y" 331.23
TOTAL 2539.43
Add Cess @ 1% on "Z" 25.39
Cost for 1 no. 2564.83
Say 2564.85

18.99A.5 For 42mm outer dia X 1-1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3945 Stainless steel Female Threaded Elbow 90° for 42mm outer dia
X 1-1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 2088.00 2088.00
WXY
TOTAL 2088.00 Z
Add 1 % Water charges on "W" 20.88
TOTAL 2108.88
Add GST on "X" (multiplying factor 0.1405) 296.30
TOTAL 2405.18
Add 15% CPOH on "Y" 360.78
TOTAL 2765.95
Add Cess @ 1% on "Z" 27.66
Cost of 1 no. 2793.61
Say 2793.60

18.99A.6 For 54mm outer dia X 2" nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3946 Stainless steel Female Threaded Elbow 90° for 54mm outer dia
X 2" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 3227.00 3227.00
WXY
TOTAL 3227.00 Z
Add 1 % Water charges on "W" 32.27
TOTAL 3259.27
Add GST on "X" (multiplying factor 0.1405) 457.93
TOTAL 3717.20
Add 15% CPOH on "Y" 557.58
TOTAL 4274.78
Add Cess @ 1% on "Z" 42.75
Cost of 1 no. 4317.52
Say 4317.50
18.100 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Male Threaded Elbow 90°
18.100.1 For 15.88 mm outer dia x 15 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8926 Stainless steel Male Threaded Elbow 90° for 15.88 mm outer
dia X 15 mm nominal dia threaded each 1.00 195.00 195.00
TOTAL 195.00 W X Y
Add 1 % Water charges on "W" 1.95 Z
TOTAL 196.95
Add GST on "X" (multiplying factor 0.1405) 27.67
TOTAL 224.62
WXY
Z

Add 15% CPOH on "Y" 33.69


TOTAL 258.31
Add Cess @ 1% on "Z" 2.58
Cost of 1 no. 260.90
Say 260.90
18.100.2 For 22.22 mm outer dia x 15 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8927 Stainless steel Male Threaded Elbow 90° for 22.22 mm outer dia
X 15 mm nominal dia threaded each 1.00 225.00 225.00
TOTAL 225.00 W X Y
Z
Add 1 % Water charges on "W" 2.25
TOTAL 227.25
Add GST on "X" (multiplying factor 0.1405) 31.93
TOTAL 259.18
Add 15% CPOH on "Y" 38.88
TOTAL 298.06
Add Cess @ 1% on "Z" 2.98
Cost of 1 no. 301.04
Say 301.05

18.100.3 For 22.22 mm outer dia x 20 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8928 Stainless steel Male Threaded Elbow 90° for 22.22 mm outer dia
X 20 mm nominal dia threaded each 1.00 225.00 225.00
TOTAL 225.00 W X Y Z
Add 1 % Water charges on "W" 2.25
TOTAL 227.25
Add GST on "X" (multiplying factor 0.1405) 31.93
TOTAL 259.18
Add 15% CPOH on "Y" 38.88
TOTAL 298.06
Add Cess @ 1% on "Z" 2.98
Cost of 1 no. 301.04
Say 301.05

18.100.4 For 28.58 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8929 Stainless steel Male Threaded Elbow 90° for 28.58 mm outer dia
X 25 mm nominal dia threaded each 1.00 225.00 225.00
TOTAL 225.00
WXYZ
Add 1 % Water charges on "W" 2.25
TOTAL 227.25
Add GST on "X" (multiplying factor 0.1405) 31.93
TOTAL 259.18
Add 15% CPOH on "Y" 38.88
TOTAL 298.06
Add Cess @ 1% on "Z" 2.98
Cost of 1 no. 301.04
Say 301.05

18.100.5 For 34.00 mm outer dia x 25 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8930 Stainless steel Male Threaded Elbow 90° for 34.00 mm outer dia
X 25 mm nominal dia threaded each 1.00 290.00 290.00
TOTAL 290.00 W X Y Z
Add 1 % Water charges on "W" 2.90
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00
18.100.6 For 34.00 mm outer dia x 32 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ
Details of cost for 1 no.
MATERIAL
8931 Stainless steel Male Threaded Elbow 90° for 34.00 mm outer dia
X 32 mm nominal dia threaded each 1.00 290.00 290.00
TOTAL 290.00
Add 1 % Water charges on "W" 2.90
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00

18.100.7 For 42.70 mm outer dia x 32 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8932 Stainless steel Male Threaded Elbow 90° for 42.70 mm outer dia
X 32 mm nominal dia threaded each 1.00 480.00 480.00
TOTAL 480.00 W X Y Z
Add 1 % Water charges on "W" 4.80
TOTAL 484.80
Add GST on "X" (multiplying factor 0.1405) 68.11
TOTAL 552.91
Add 15% CPOH on "Y" 82.94
TOTAL 635.85
Add Cess @ 1% on "Z" 6.36
Cost of 1 no. 642.21
Say 642.20

18.100.8 For 42.70 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8933 Stainless steel Male Threaded Elbow 90° for 42.70 mm outer dia
X40 mm nominal dia threaded each 1.00 480.00 480.00
TOTAL 480.00 W X Y Z
Add 1 % Water charges on "W" 4.80
TOTAL 484.80
Add GST on "X" (multiplying factor 0.1405) 68.11
TOTAL 552.91
Add 15% CPOH on "Y" 82.94
TOTAL 635.85
Add Cess @ 1% on "Z" 6.36
Cost of 1 no. 642.21
Say 642.20

18.100.9 For 48.60 mm outer dia x 40 mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8934 Stainless steel Male Threaded Elbow 90° for 48.60 mm outer dia
X 40 mm nominal dia threaded each 1.00 695.00 695.00
TOTAL 695.00 W X Y
Add 1 % Water charges on "W" 6.95 Z
TOTAL 701.95
Add GST on "X" (multiplying factor 0.1405) 98.62
TOTAL 800.57
Add 15% CPOH on "Y" 120.09
TOTAL 920.66
Add Cess @ 1% on "Z" 9.21
Cost of 1 no. 929.87
Say 929.85
18.100.10 For 48.60 mm outer dia x 50 mm nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8935 Stainless steel Male Threaded Elbow 90° for 48.60 mm outer dia
X 50 mm nominal dia threaded each 1.00 695.00 695.00
TOTAL 695.00 W X Y
Z
WXY
Add 1 % Water charges on "W" 6.95 Z
TOTAL 701.95
Add GST on "X" (multiplying factor 0.1405) 98.62
TOTAL 800.57
Add 15% CPOH on "Y" 120.09
TOTAL 920.66
Add Cess @ 1% on "Z" 9.21
Cost of 1 no. 929.87
Say 929.85
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.100.A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Male Threaded Elbow 90°


18.100A. For 15mm outer dia X 1/2" nominal dia threaded
1 Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3947 Stainless steel Male Threaded Elbow 90° for 15mm outer dia X
1/2" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 525.00 525.00
TOTAL 525.00 W X Y Z
Add 1 % Water charges on "W" 5.25
TOTAL 530.25
Add GST on "X" (multiplying factor 0.1405) 74.50
TOTAL 604.75
Add 15% CPOH on "Y" 90.71
TOTAL 695.46
Add Cess @ 1% on "Z" 6.95
Cost of 1 no. 702.42
Say 702.40

18.100A.2 For 22mm outer dia X 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3948 Stainless steel Male Threaded Elbow 90° for 22mm outer dia X
3/4" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 790.00 790.00
WXY
TOTAL 790.00 Z
Add 1 % Water charges on "W" 7.90
TOTAL 797.90
Add GST on "X" (multiplying factor 0.1405) 112.10
TOTAL 910.00
Add 15% CPOH on "Y" 136.50
TOTAL 1046.51
Add Cess @ 1% on "Z" 10.47
Cost of 1 no. 1056.97
Say 1056.95

18.100A.3 For 28mm outer dia X 1" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3949 Stainless steel Male Threaded Elbow 90° for 28mm outer dia X
1" nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 1045.00 1045.00 W X Y
TOTAL 1045.00 Z
Add 1 % Water charges on "W" 10.45
TOTAL 1055.45
Add GST on "X" (multiplying factor 0.1405) 148.29
TOTAL 1203.74
Add 15% CPOH on "Y" 180.56
TOTAL 1384.30
Add Cess @ 1% on "Z" 13.84
Cost of 1 no. 1398.14
Say 1398.15
18.100A.4 For 35mm outer dia X 1-1/4" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3950 Stainless steel Male Threaded Elbow 90° for 35mm outer dia X 1-

WXY
Z
1/4" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 1440.00 1440.00
WXY
TOTAL 1440.00 Z
Add 1 % Water charges on "W" 14.40
TOTAL 1454.40
Add GST on "X" (multiplying factor 0.1405) 204.34
TOTAL 1658.74
Add 15% CPOH on "Y" 248.81
TOTAL 1907.55
Add Cess @ 1% on "Z" 19.08
Cost of 1 no. 1926.63
Say 1926.65

18.100A.5 For 42mm outer dia X 1-1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3951 Stainless steel Male Threaded Elbow 90° for 42mm outer dia X 1-
1/2" nominal dia threaded of grade 316L as per IS 6911:2017
and conforming to EN-10312 each 1.00 2635.00 2635.00 W X Y
TOTAL 2635.00 Z
Add 1 % Water charges on "W" 26.35
TOTAL 2661.35
Add GST on "X" (multiplying factor 0.1405) 373.92
TOTAL 3035.27
Add 15% CPOH on "Y" 455.29
TOTAL 3490.56
Add Cess @ 1% on "Z" 34.91
Cost of 1 no. 3525.47
Say 3525.45

18.100A.6 For 54mm outer dia X 2" mm nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3952 Stainless steel Male Threaded Elbow 90° for 54mm outer dia X
2" nominal dia threaded of grade 316L as per IS 6911:2017 and
conforming to EN-10312 each 1.00 2998.00 2998.00
TOTAL 2998.00 W X Y Z
Add 1 % Water charges on "W" 29.98
TOTAL 3027.98
Add GST on "X" (multiplying factor 0.1405) 425.43
TOTAL 3453.41
Add 15% CPOH on "Y" 518.01
TOTAL 3971.42
Add Cess @ 1% on "Z" 39.71
Cost of 1 no. 4011.14
Say 4011.15
18.101 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Cap
18.101.1 For 15.88 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
8936 Stainless steel Cap for 15.88 mm outer dia pipe each 1.00 48.00 48.00
TOTAL 48.00
WXY
Add 1 % Water charges on "W" 0.48 Z
TOTAL 48.48
Add GST on "X" (multiplying factor 0.1405) 6.81
TOTAL 55.29
Add 15% CPOH on "Y" 8.29
TOTAL 63.59
Add Cess @ 1% on "Z" 0.64
Cost of 1 no. 64.22
Say 64.20
18.101.2 For 22.22 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL

WXY
Z
8937 Stainless steel Cap for 22.22 mm outer dia pipe each 1.00 70.00 70.00
TOTAL 70.00
WXY
Add 1 % Water charges on "W" 0.70 Z
TOTAL 70.70
Add GST on "X" (multiplying factor 0.1405) 9.93
TOTAL 80.63
Add 15% CPOH on "Y" 12.10
TOTAL 92.73
Add Cess @ 1% on "Z" 0.93
Cost of 1 no. 93.66
Say 93.65

18.101.3 For 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8938 Stainless steel Cap for 28.58 mm outer dia pipe each 1.00 90.00 90.00
TOTAL 90.00
Add 1 % Water charges on "W" 0.90
TOTAL 90.90
Add GST on "X" (multiplying factor 0.1405) 12.77
TOTAL 103.67
Add 15% CPOH on "Y" 15.55
TOTAL 119.22
Add Cess @ 1% on "Z" 1.19
Cost of 1 no. 120.41
Say 120.40

18.101.4 For 34.00 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8939 Stainless steel Cap for 34.00 mm outer dia pipe each 1.00 175.00 175.00
TOTAL 175.00
Add 1 % Water charges on "W" 1.75
TOTAL 176.75
Add GST on "X" (multiplying factor 0.1405) 24.83
TOTAL 201.58
Add 15% CPOH on "Y" 30.24
TOTAL 231.82
Add Cess @ 1% on "Z" 2.32
Cost of 1 no. 234.14
Say 234.15

18.101.5 For 42.70 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8940 Stainless steel Cap for 42.70 mm outer dia pipe each 1.00 250.00 250.00
TOTAL 250.00
Add 1 % Water charges on "W" 2.50
TOTAL 252.50
Add GST on "X" (multiplying factor 0.1405) 35.48
TOTAL 287.98
Add 15% CPOH on "Y" 43.20
TOTAL 331.17
Add Cess @ 1% on "Z" 3.31
Cost of 1 no. 334.48
Say 334.50
18.101.6 For 48.60 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8941 Stainless steel Cap for 48.60 mm outer dia pipe each 1.00 325.00 325.00
TOTAL 325.00
WXY
Add 1 % Water charges on "W" 3.25 Z
TOTAL 328.25
Add GST on "X" (multiplying factor 0.1405) 46.12
TOTAL 374.37
Add 15% CPOH on "Y" 56.16
TOTAL 430.52
Add Cess @ 1% on "Z" 4.31
Cost of 1 no. 434.83
Say 434.85
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.101A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Cap
18.101A.1 For 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3953 Stainless steel Cap for 15 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 320.00 320.00
TOTAL 320.00 W X Y Z
Add 1 % Water charges on "W" 3.20
TOTAL 323.20
Add GST on "X" (multiplying factor 0.1405) 45.41
TOTAL 368.61
Add 15% CPOH on "Y" 55.29
TOTAL 423.90
Add Cess @ 1% on "Z" 4.24
Cost of 1 no. 428.14
Say 428.15

18.101A.2 For 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3954 Stainless steel Cap for 22 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 415.00 415.00
TOTAL 415.00 W X Y
Add 1 % Water charges on "W" 4.15 Z
TOTAL 419.15
Add GST on "X" (multiplying factor 0.1405) 58.89
TOTAL 478.04
Add 15% CPOH on "Y" 71.71
TOTAL 549.75
Add Cess @ 1% on "Z" 5.50
Cost of 1 no. 555.24
Say 555.25

18.101A.3 For 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3955 Stainless steel Cap for 28 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 515.00 515.00
TOTAL 515.00 W X Y
Z
Add 1 % Water charges on "W" 5.15
TOTAL 520.15
Add GST on "X" (multiplying factor 0.1405) 73.08
TOTAL 593.23
Add 15% CPOH on "Y" 88.98
TOTAL 682.22
Add Cess @ 1% on "Z" 6.82
Cost of 1 no. 689.04
Say 689.05
18.101A.4 For 35 mm outer dia pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3956 Stainless steel Cap for 35 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 720.00 720.00
TOTAL 720.00 W X Y Z
Add 1 % Water charges on "W" 7.20
TOTAL 727.20
Add GST on "X" (multiplying factor 0.1405) 102.17
TOTAL 829.37
Add 15% CPOH on "Y" 124.41
TOTAL 953.78
Add Cess @ 1% on "Z" 9.54
Cost of 1 no. 963.32
Say 963.30

18.101A.5 For 42 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3957 Stainless steel Cap for 42 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 1565.00 1565.00
TOTAL 1565.00 W X Y
Add 1 % Water charges on "W" 15.65 Z
TOTAL 1580.65
Add GST on "X" (multiplying factor 0.1405) 222.08
TOTAL 1802.73
Add 15% CPOH on "Y" 270.41
TOTAL 2073.14
Add Cess @ 1% on "Z" 20.73
Cost of 1 no. 2093.87
Say 2093.85

18.101A.6 For 54 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3958 Stainless steel Cap for 54 mm outer dia pipe of grade 316L as
per IS 6911:2017 and conforming to EN-10312 each 1.00 1720.00 1720.00
TOTAL 1720.00 W X Y Z
Add 1 % Water charges on "W" 17.20
TOTAL 1737.20
Add GST on "X" (multiplying factor 0.1405) 244.08
TOTAL 1981.28
Add 15% CPOH on "Y" 297.19
TOTAL 2278.47
Add Cess @ 1% on "Z" 22.78
Cost of 1 no. 2301.25
Say 2301.25
18.102 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M
profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Pipe Bridge
18.102.1 For 15.88 mm outer dia pipe

WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 1.00 220.00 220.00
TOTAL 220.00
Add 1 % Water charges on "W" 2.20
TOTAL 222.20
Add GST on "X" (multiplying factor 0.1405) 31.22
TOTAL 253.42
Add 15% CPOH on "Y" 38.01
TOTAL 291.43
Add Cess @ 1% on "Z" 2.91
Cost of 1 no. 294.35
Say 294.35
18.102.2 For 22.22 mm outer dia pipe
WXYZ
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
8943 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 1.00 290.00 290.00
TOTAL 290.00
Add 1 % Water charges on "W" 2.90
TOTAL 292.90
Add GST on "X" (multiplying factor 0.1405) 41.15
TOTAL 334.05
Add 15% CPOH on "Y" 50.11
TOTAL 384.16
Add Cess @ 1% on "Z" 3.84
Cost of 1 no. 388.00
Say 388.00
18.102.3 For 28.58 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs. WXYZ


Details of cost for 1 no.
MATERIAL
8944 Stainless steel Pipe Bridge for 28.58 mm outer dia pipe each 1.00 415.00 415.00
TOTAL 415.00
Add 1 % Water charges on "W" 4.15
TOTAL 419.15
Add GST on "X" (multiplying factor 0.1405) 58.89
TOTAL 478.04
Add 15% CPOH on "Y" 71.71
TOTAL 549.75
Add Cess @ 1% on "Z" 5.50
Cost for 1 no. 555.24
Say 555.25
Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standar
18.102A with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.

Pipe Bridge
18.102A.1 For 15 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3959 Stainless steel Pipe Bridge for 15 mm outer dia pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 415.00 415.00
TOTAL 415.00 W X Y Z
Add 1 % Water charges on "W" 4.15
TOTAL 419.15
Add GST on "X" (multiplying factor 0.1405) 58.89
TOTAL 478.04
Add 15% CPOH on "Y" 71.71
TOTAL 549.75
Add Cess @ 1% on "Z" 5.50
Cost of 1 no. 555.24
Say 555.25

18.102A.2 For 22 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3960 Stainless steel Pipe Bridge for 22 mm outer dia pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1110.00 1110.00
TOTAL 1110.00 W X Y Z
Add 1 % Water charges on "W" 11.10
TOTAL 1121.10
Add GST on "X" (multiplying factor 0.1405) 157.51
TOTAL 1278.61
Add 15% CPOH on "Y" 191.79
TOTAL 1470.41
Add Cess @ 1% on "Z" 14.70
Cost of 1 no. 1485.11
Say 1485.10
18.102A.3 For 28 mm outer dia pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3961 Stainless steel Pipe Bridge for 28 mm outer dia pipe of grade
316L as per IS 6911:2017 and conforming to EN-10312
each 1.00 1526.00 1526.00
WXYZ
TOTAL 1526.00
Add 1 % Water charges on "W" 15.26
TOTAL 1541.26
Add GST on "X" (multiplying factor 0.1405) 216.55
TOTAL 1757.81
Add 15% CPOH on "Y" 263.67
TOTAL 2021.48
Add Cess @ 1% on "Z" 20.21
Cost for 1 no. 2041.69
Say 2041.70
18.103 Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Male Union
18.103.1 For 15mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3962 Stainless steel Male Union for 15mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 885.00 885.00 W X Y
TOTAL 885.00 Z
Add 1 % Water charges on "W" 8.85
TOTAL 893.85
Add GST on "X" (multiplying factor 0.1405) 125.59
TOTAL 1019.44
Add 15% CPOH on "Y" 152.92
TOTAL 1172.35
Add Cess @ 1% on "Z" 11.72
Cost of 1 no. 1184.07
Say 1184.05

18.103.2 For 22mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3963 Stainless steel Male Union for 22mm outer dia X 1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 895.00 895.00
WXYZ
TOTAL 895.00
Add 1 % Water charges on "W" 8.95
TOTAL 903.95
Add GST on "X" (multiplying factor 0.1405) 127.00
TOTAL 1030.95
Add 15% CPOH on "Y" 154.64
TOTAL 1185.60
Add Cess @ 1% on "Z" 11.86
Cost of 1 no. 1197.45
Say 1197.45
18.103.3 For 22mm outer dia X 3/4" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3964 Stainless steel Male Union for 22mm outer dia X 3/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 1025.00 1025.00
TOTAL 1025.00 W X Y Z
Add 1 % Water charges on "W" 10.25
TOTAL 1035.25
Add GST on "X" (multiplying factor 0.1405) 145.45
TOTAL 1180.70
Add 15% CPOH on "Y" 177.11
TOTAL 1357.81
Add Cess @ 1% on "Z" 13.58
Cost of 1 no. 1371.39
Say 1371.40

18.103.4 For 28mm outer dia X 1" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3965 Stainless steel Male Union for 28mm outer dia X 1" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to
EN-10312 each 1.00 1805.00 1805.00
TOTAL 1805.00 W X Y Z
WXYZ
Add 1 % Water charges on "W" 18.05
TOTAL 1823.05
Add GST on "X" (multiplying factor 0.1405) 256.14
TOTAL 2079.19
Add 15% CPOH on "Y" 311.88
TOTAL 2391.07
Add Cess @ 1% on "Z" 23.91
Cost of 1 no. 2414.98
Say 2415.00

18.103.5 For 35mm outer dia X 1-1/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3966 Stainless steel Male Union for 35mm outer dia X 1-1/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 1885.00 1885.00
TOTAL 1885.00 W X Y Z
Add 1 % Water charges on "W" 18.85
TOTAL 1903.85
Add GST on "X" (multiplying factor 0.1405) 267.49
TOTAL 2171.34
Add 15% CPOH on "Y" 325.70
TOTAL 2497.04
Add Cess @ 1% on "Z" 24.97
Cost of 1 no. 2522.01
Say 2522.00

18.103.6 For 42mm outer dia X 1-1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3967 Stainless steel Male Union for 42mm outer dia X 1-1/2" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 2130.00 2130.00
TOTAL 2130.00 W X Y Z
Add 1 % Water charges on "W" 21.30
TOTAL 2151.30
Add GST on "X" (multiplying factor 0.1405) 302.26
TOTAL 2453.56
Add 15% CPOH on "Y" 368.03
TOTAL 2821.59
Add Cess @ 1% on "Z" 28.22
Cost of 1 no. 2849.81
Say 2849.80
18.103.7 For 54mm outer dia X 2" nominal dia threaded
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3968 Stainless steel Male Union for 54mm outer dia X 2" nominal dia
threaded of grade 316L as per IS 6911:2017 and conforming to
EN-10312 each 1.00 3680.00 3680.00
TOTAL 3680.00 W X Y Z
Add 1 % Water charges on "W" 36.80
TOTAL 3716.80
Add GST on "X" (multiplying factor 0.1405) 522.21
TOTAL 4239.01
Add 15% CPOH on "Y" 635.85
TOTAL 4874.86
Add Cess @ 1% on "Z" 48.75
Cost of 1 no. 4923.61
Say 4923.60
18.104 Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Union
18.104.1 For 22 mm outer dia X 3/4" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.

WXYZ
MATERIAL
3969 Stainless steel Female Union for 22 mm outer dia X 3/4" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 950.00 950.00 W X Y Z
TOTAL 950.00
Add 1 % Water charges on "W" 9.50
TOTAL 959.50
Add GST on "X" (multiplying factor 0.1405) 134.81
TOTAL 1094.31
Add 15% CPOH on "Y" 164.15
TOTAL 1258.46
Add Cess @ 1% on "Z" 12.58
Cost of 1 no. 1271.04
Say 1271.05

18.104.2 For 28mm outer dia X 1" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3970 Stainless steel Female Union for 28mm outer dia X 1" nominal
dia threaded of grade 316L as per IS 6911:2017 and conforming
to EN-10312 each 1.00 1280.00 1280.00 W X Y Z
TOTAL 1280.00
Add 1 % Water charges on "W" 12.80
TOTAL 1292.80
Add GST on "X" (multiplying factor 0.1405) 181.64
TOTAL 1474.44
Add 15% CPOH on "Y" 221.17
TOTAL 1695.60
Add Cess @ 1% on "Z" 16.96
Cost of 1 no. 1712.56
Say 1712.55
18.105 Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard
V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Transition Elbow / FTE
18.105.1 For 15mm outer dia X 1/2" nominal dia threaded

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 no.
MATERIAL
3971 Stainless steel Female Transition Elbow / FTE for 15mm outer
dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 649.00 649.00 W X Y Z
TOTAL 649.00
Add 1 % Water charges on "W" 6.49
TOTAL 655.49
Add GST on "X" (multiplying factor 0.1405) 92.10
TOTAL 747.59
Add 15% CPOH on "Y" 112.14
TOTAL 859.72
Add Cess @ 1% on "Z" 8.60
Cost of 1 no. 868.32
Say 868.30

18.105.2 For 22mm outer dia X 1/2" nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3972 Stainless steel Female Transition Elbow / FTE for 22mm outer
dia X 1/2" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 900.00 900.00
TOTAL 900.00 W X Y Z
Add 1 % Water charges on "W" 9.00
TOTAL 909.00
Add GST on "X" (multiplying factor 0.1405) 127.71
TOTAL 1036.71
Add 15% CPOH on "Y" 155.51
TOTAL 1192.22
Add Cess @ 1% on "Z" 11.92
Cost of 1 no. 1204.14
Say 1204.15

18.105.3 For 22mm outer dia X 3/4" nominal dia threaded


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 no.
MATERIAL
3973 Stainless steel Female Transition Elbow / FTE for 22mm outer
dia X 3/4" nominal dia threaded of grade 316L as per IS
6911:2017 and conforming to EN-10312 each 1.00 870.00 870.00
TOTAL 870.00 W X Y Z
Add 1 % Water charges on "W" 8.70
TOTAL 878.70
Add GST on "X" (multiplying factor 0.1405) 123.46
TOTAL 1002.16
Add 15% CPOH on "Y" 150.32
TOTAL 1152.48
Add Cess @ 1% on "Z" 11.52
Cost of 1 no. 1164.01
Say 1164.00

SUB HEAD : 19.0


DRAINAGE
1309
SUB HEAD : 19.0
DRAINAGE
1309

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :
including testing of joints etc. complete :
19.1.1 100 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metre
MATERIAL
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each 55.00 70.00 3850.00
Added 10% allowance for breakage
2224 Carriage of S.W. pipes 100 mm dia 100 metre 0.33 218.58 72.13
Added 10% allowance for breakage
Cement for 50 joints = 0.019 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.019 5000.00 95.00
2209 Carriage of Cement tonne 0.019 145.72 2.77
0983 Fine sand (zone IV) cum 0.01 900.00 9.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.01 163.93 1.64
1881 Spun yarn kilogram 4.50 55.00 247.50
or plain gaskin @ 0.09 kg per joint = 0.09x50 = 4.50 kg
LABOUR
0123 Mason (brick layer) 1st class day 1.00 784.00 784.00
0124 Mason (brick layer) 2nd class day 1.00 714.00 714.00
0114 Beldar day 3.00 645.00 1935.00
0101 Bhisti day 1.00 714.00 714.00
TOTAL 8425.04
Add 1 % Water charges on "W" 84.25
TOTAL 8509.29
Add GST on "X" (multiplying factor 0.1405) 1195.56
TOTAL 9704.84
Add 15% CPOH on "Y" 1455.73
TOTAL 11160.57
Add Cess @ 1% on "Z" 111.61
Cost of 30 metre 11272.18
Cost of 1 metre 375.74
Say 375.75
19.1.2 150 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metre
MATERIAL
1855 Stoneware pipes grade A (60 cm long) 150 mm dia each 55.00 125.00 6875.00
Added 10% allowance for breakage
2225 Carriage of S.W. pipes 150 mm dia 100 metre 0.33 437.15 144.26
Added 10% allowance for breakage
Cement of 50 joints = 0.036 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.036 5000.00 180.00
2209 Carriage of Cement tonne 0.036 145.72 5.25
0983 Fine sand (zone IV) cum 0.019 900.00 17.10
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.019 163.93 3.11
1881 Spun yarn kilogram 9.00 55.00 495.00
or plain gaskin @ 0.18 kg per joint = 0.18x50 = 9 kg
LABOUR
0123 Mason (brick layer) 1st class day 1.50 784.00 1176.00
0124 Mason (brick layer) 2nd class day 1.50 714.00 1071.00
0114 Beldar day 4.00 645.00 2580.00
0101 Bhisti day 1.00 714.00 714.00
TOTAL 13260.72
Add 1 % Water charges on "W" 132.61
TOTAL 13393.33
Add GST on "X" (multiplying factor 0.1405) 1881.76
TOTAL 15275.09
Add 15% CPOH on "Y" 2291.26
TOTAL 17566.35
Add Cess @ 1% on "Z" 175.66
Cost of 30 metre 17742.02
Cost of 1 metre 591.40
Say 591.40
19.1.3 200 mm diameter
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 30 metre
MATERIAL
1856 Stoneware pipes grade A (60 cm long) 200 mm dia each 55.00 200.00 11000.00
Added 10% allowance for breakage
2226 Carriage of S.W. pipes 200 mm dia 100 metre 0.33 728.59 240.43
Added 10% allowance for breakage
Cement of 50 joints = 0.053 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.053 5000.00 265.00
2209 Carriage of Cement tonne 0.053 145.72 7.72
0983 Fine sand (zone IV) cum 0.028 900.00 25.20
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.028 163.93 4.59
1881 Spun yarn kilogram 12.00 55.00 660.00
or plain gaskin @ 0.24 kg per joint = 0.24x50 =12.00 kg
LABOUR
0123 Mason (brick layer) 1st class day 1.75 784.00 1372.00
0124 Mason (brick layer) 2nd class day 1.75 714.00 1249.50
0114 Beldar day 4.50 645.00 2902.50
0101 Bhisti day 1.25 714.00 892.50
TOTAL 18619.45
Add 1 % Water charges on "W" 186.19
TOTAL 18805.64
Add GST on "X" (multiplying factor 0.1405) 2642.19
TOTAL 21447.84
Add 15% CPOH on "Y" 3217.18
TOTAL 24665.01
Add Cess @ 1% on "Z" 246.65
Cost of 30 metre 24911.66
Cost of 1 metre 830.39
Say 830.40

19.1.4 250 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metre
MATERIAL
1858 Stoneware pipes grade A (60 cm long) 250 mm dia each 55.00 350.00 19250.00
Added 10% allowance for breakage
2228 Carriage of S.W. pipes 250 mm dia 100 metre 0.33 1249.01 412.17
Added 10% allowance for breakage
Cement of 50 joints = 0.094 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.094 5000.00 470.00
2209 Carriage of Cement tonne 0.094 145.72 13.70
0983 Fine sand (zone IV) cum 0.05 900.00 45.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.05 163.93 8.20
1881 Spun yarn kilogram 15.00 55.00 825.00
or plain gaskin @ 0.30 kg per joint = 0.30x50= 15.00 kg
LABOUR
0123 Mason (brick layer) 1st class day 2.25 784.00 1764.00
0124 Mason (brick layer) 2nd class day 2.25 714.00 1606.50
0114 Beldar day 5.50 645.00 3547.50
0101 Bhisti day 1.50 714.00 1071.00
TOTAL 29013.07
Add 1 % Water charges on "W" 290.13
TOTAL 29303.20
Add GST on "X" (multiplying factor 0.1405) 4117.10
TOTAL 33420.30
Add 15% CPOH on "Y" 5013.04
TOTAL 38433.34
Add Cess @ 1% on "Z" 384.33
Cost of 30 metre 38817.68
Cost of 1 metre 1293.92
Say 1293.90
19.1.5 300 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 30 metre
MATERIAL
1859 Stoneware pipes grade A (60 cm long) 300 mm dia each 55.00 525.00 28875.00
Added 10% allowance for breakage
2229 Carriage of S.W. pipes 300 mm dia 100 metre 0.33 1561.26 515.22
Added 10% allowance for breakage
Cement of 50 joints = 0.125 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.125 5000.00 625.00
2209 Carriage of Cement tonne 0.125 145.72 18.22
0983 Fine sand (zone IV) cum 0.075 900.00 67.50
2261 Carriage of Fine sand (1 part badarpur
sand : 2 parts jamuna sand) cum 0.075 163.93 12.29
1881 Spun yarn kilogram 18.00 55.00 990.00
or plain gaskin @ 0.36 kg / joint
= 0.36x50 =18.00 kg
LABOUR
0123 Mason (brick layer) 1st class day 2.50 784.00 1960.00
0124 Mason (brick layer) 2nd class day 2.50 714.00 1785.00
0114 Beldar day 6.00 645.00 3870.00
0101 Bhisti day 1.50 714.00 1071.00
TOTAL 39789.23
Add 1 % Water charges on "W" 397.89
TOTAL 40187.12
Add GST on "X" (multiplying factor 0.1405) 5646.29
TOTAL 45833.41
Add 15% CPOH on "Y" 6875.01
TOTAL 52708.42
Add Cess @ 1% on "Z" 527.08
Cost of 30 metre 53235.50
Cost of 1 metre 1774.52
Say 1774.50
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W.
including bed concrete as per standard design :
19.2.1 100 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than 1200 mm
W = 12.4 + 30 = 42.4
Area= 42.4² x ( 0.5 + 3.14/ 8) - (3.14 x 12.4²/4)
= 1484 sqcm = 0.1484 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd. = 1.48 cum
4.1.10 Rate as per item no 4.1.10 of SH : Concrete Work cum 1.48 6050.65 8954.96
Cost of 10 metres 8954.96
Cost of metre 895.50
Say 895.50

19.2.2 150 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Area = W x W/2 + ½ x (3.14 x W² / 4)- (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 150 + 16 + 16 = 182 mm or 18.2 cm
X = 300 mm as trench depth is less than 1200 mm W = 18.2 + 30 = 48.2
Area = 48.2² x ( 0.5 + 3.14/ 8) - (3.14 x 18.2 ²/4)
= 1807.66 sqcm = 0.1808 sqm. Say 0.181 sqm For 10 m length qty. of
concrete reqd. = 1.81 cum Rate as per item no 4.1.10 of SH : Concrete
Work Cost of 10 metres
Cost of metre
Say 10951.68
10951.68
1095.17
4.1.10 cum 1.81 6050.65 1095.15
19.2.3 200 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Area = W x W/2 + ½ x (3.14 x W² / 4)- (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
X = 300 mm as trench depth is less than 1200 mm W = 23.4 + 30 = 53.4
Area = 53.4² x ( 0.5 + 3.14 / 8) - (3.14 x 23.4²/4)
= 2115 sqcm = 0.2115 sqm Say 0.211 sqm
For 10 m length qty. of concrete reqd. = 2.11 cum Rate as per item no
4.1.10 of SH : Concrete Work Cost of 10 metres
Cost of metre
Say 12766.87
12766.87
1276.69
4.1.10 cum 2.11 6050.65 1276.70

19.2.4 250 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
Area = W x W/2 + ½ x (3.14 x W² / 4)- (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
X = 300 mm as trench depth is less than 1200 mm W = 29 + 30 = 59
Area= 59² x ( 0.5 + 3.14/ 8) - (3.14 x 29²/4)
= 2447 sqcm = 0.2447 sqm. Say 0.244 sqm
For 10 m length qty. of concrete reqd. = 2.44 cum Rate as per item no
4.1.10 of SH : Concrete Work Cost of 10 metres
Cost of metre
Say 14763.59
14763.59
1476.36
4.1.10 cum 2.44 6050.65 1476.35
19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunche
pipes including bed concrete as per standard design :
19.3.1 100 mm diameter S.W. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10 metres
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) -(3.14/2)R²
= WD1+R²(cot Q-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 + 12 = 124 mm
W = 124 + 300 = 424 mm
D1 = Depth = 100 + (½ x 124) = 162 mm R = 62 mm
Sin Q = (2x62)/424 = 0.292 therefor Q = 17°0' Hence Tan Q = 0.3057
Area = 424 x 162 + (62)² (Cot Q - 3.14 + Q)
= [68688 + 3844 (1/0.3057 - 180° + 17°0')] sqmm
= [68688 + 3844 (3.27 - 163°0' x 3.14/180)] sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm
= 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
For 10 m length qty. of concrete reqd. = 0.07034x10 = 0.7034 cum
Rate as per item no 4.1.10 of SH : Concrete Work Cost of 10 metres
Cost per metre
Say

4256.03
4256.03
425.60
4.1.10 cum 0.7034 6050.65 425.60
19.3.2 150 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre length pipe
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q)- (3.14/2)R²
= WD1 + R²(Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 150 + 16+ 16 = 182 mm W = 182 + 300 =
482 mm
D1 = Depth = 150 + (½ x 182) = 241 mm R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefor Q = 22°12' Hence Tan Q = 0.4081
Area = 482 x 241 + (91)² (Cot Q - 3.14 + Q)
= [116162 + 8281 (1/0.4081 - 180°+ 22°12')] sqmm
= [116162 + 8281 (2.45 - 157°48' x3.14/180)] sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm
= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm For 10 m length qty. of concrete
reqd.
= 0.1136777x10 = 1.136777 cum. Say 1.14 cum
Rate as per item no 4.1.10 of SH : Concrete Work Cost of 10 metres
Cost per metre
Say

6897.74
6897.74
689.77
4.1.10 cum 1.14 6050.65 689.75

19.3.3 200 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre length pipe
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 200+ 17 + 17 = 234 mm W = 234 + 300 =
534 mm
D1 = Depth = 150 + (½ x 234) = 267 mm R = 117 mm
Sin Q = (2x117)/534 = 0.4382 therefor Q= 26°0' Hence Tan Q = 0.4877
Area = 534 x 267 + (117)² (Cot Q - 3.14 + Q)
= [142578 + 13689 (1/0.4877 - 180°+ 26°0')] sqmm
= [142578 + 13689 (2.05 - 154°0' x 3.14/180)] sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm
= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm
= 133817.04 sqmm
Say 133817 sqmm or 0.134 sqm
For 10 m length qty. of concrete reqd. = 0.134x10 = 1.34 cum
Rate as per item no 4.1.10 of SH : Concrete Work Cost of 10 metres
Cost per metre
Say

8107.87
8107.87
810.79
4.1.10 cum 1.34 6050.65 810.80
19.3.4 250 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre length pipe
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q)- (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 250 + 20 + 20 = 290 mm W = 290 + 300 =
590 mm
D1 = Depth = 150 + (½ x 290) = 295 mm R = 145 mm
Sin Q = (2x145)/590 = 0.49154
therefor Q = 29°26' Hence Tan Q = 0.5635
Area = 590 x 295 + (145)² (Cot Q - 3.14 + Q)
= [174050 + 21025 (1/0.5635 - 180°+ 29°26')] sqmm
= [174050 + 21025 (1.77 - 150°34' x 3.14/180)] sqmm
= [174050 + 21025 x (1.77-2.63)] sqmm
= [174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm
= 155968.5 sqmm
Say 155968 sqmm or 0.156 sqm
For 10 m length qty. of concrete reqd. = 0.156x10 = 1.56 cum
Rate as per item no 4.1.10 of SH : Concrete Work Cost of 10 metres
Cost per metre
Say

9439.01
9439.01
943.90
4.1.10 cum 1.56 6050.65 943.90

19.3.5 300 mm diameter S.W. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre length pipe
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q)- (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 300 + 25 + 25 = 350 mm W = 350 + 300 =
650 mm
D1 = Depth = 150 + (½ x 350) = 325 mm R = 175 mm
Sin Q = (2x175)/650 = 0.5385 therefor Q = 32°34' Hence Tan Q =
0.6387
Area = 650 x 325 + (175)² (Cot Q - 3.14 + Q)
= [211250 + 30625 (1/0.6387 - 180°+ 32°34')] sqmm
= [211250 + 30625 (1.566 - 147°26' x 3.14/180)] sqmm
= [211250 + 30625 x (1.566-2.571)] sqmm
= [211250 + 30625 x (-1.005)] sqmm
= [211250 - 30778.13) sqmm
= 180471.87 sqmm
Say 0.180 sqm
For 10 m length qty. of concrete reqd. = 0.180x10 = 1.80 cum
Rate as per item no 4.1.10 of SH : Concrete Work Cost of 10 metres
Cost per metre
Say

10891.17
10891.17
1089.12
4.1.10 cum 1.80 6050.65 1089.10
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cov
of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


1900 Details of cost of one gully tarp each each 1.00 115.00 115.00
1364 S.W. gully trap P type 100x100 mm each L.S. 1.00 40.00 40.00
1352 C.I. grating 100x100 mm cum 1.00 480.00 480.00
9977 C.I. cover and frame 300x300 mm inside Carriage of materials cum 4.50 2.12 9.54
4.1.11 Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone cum 0.09 5660.45 509.44
6.1.1 aggregate 40 mm nominal size) sqm 0.13 6882.00 894.66
4.2.3 0.68x0.68x0.10 m = 0.046 cum 0.008 9375.20 75.00
13.9.1 Concrete around trap 0.30x0.30x0.675 m = 0.061 cum 0.29 386.55 112.10
Total=0.107 cum Deduct: 2235.74
0.345÷3x[0.09+0.01+(0.09x0.01)1/2] = 0.015 cum 6.45
3.14/4x(0.124)²x0.47 = 0.006 cum 2242.19
Total= 0.021 cum 91.46
Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum say 0.09 cum 2333.65
Rate as per item no 4.1.11 of SH : Concrete Work 111.37
Brick work with 7.5 class designation brick in cement mortar 1:4 (1 2445.02
cement : 4 coarse sand) 8.54
1.66x0.115x0.675 m = 0.129 cum. say 0.13 cum Rate as per item no 2453.56
6.1.1 of SH : Brick Work 2453.55
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement :
[1/2x0.358x(1.20+0.40)] = 0.286 sqm. say 0.29 sqm
Rate as per item no 13.9.1 of SH : Finishing TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of each
Say
19.4.1.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


1900 Detaila of cost of one gully tarp each each 1.00 115.00 115.00
1364 S.W. gully trap P type 100x100 mm each L.S. 1.00 40.00 40.00
1352 C.I. grating 100x100 mm cum 1.00 480.00 480.00
9977 C.I. cover and frame 300x300 mm inside Carriage of materials 4.50 2.12 9.54
4.1.11 Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone 0.09 5660.45 509.44
aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap 0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum Deduct:
0.345÷3x[0.09+0.01+(0.09x0.01)1/2]= 0.015 cum
3.14/4x(0.124)²x0.47 = 0.006 cum
Total = 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum say 0.09 cum
Rate as per item no 4.1.11 of SH : Concrete Work

6.36.1 Brick work with modular extruded brunt fly ash clay sewer bricks cum 0.13 6528.70 848.73
4.2.3 (Conforming to IS: 4885 ) cement mortar 1:4 (1 cement :4 coarse sand) cum 0.008 9375.20 75.00
13.9.1 1.66x0.115x0.675 m = 0.129 cum say 0.13 cum Rate as per item No sqm 0.29 386.55 112.10
6.36.1 of SH : Brick Work 2189.81
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone 6.45
aggregate 20 mm nominal size) 2196.26
1.66x0.115x0.04 m = 0.008 cum 91.46
Rate as per item no 4.2.3 of SH : Concrete Work 2287.72
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 111.37
floating coat of neat cement : 2399.09
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say 0.29 sqm 8.54
Rate as per item no 13.9.1 of SH : Finishing TOTAL 2407.63
Add 1 % Water charges on "W-A" TOTAL 2407.65
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of each
Say

19.4.2 150 x 100 mm size P type


19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


1902 Details of cost of one gully tarp each each 1.00 155.00 155.00
1366 S.W. gully trap P type 150x100 mm each L.S. 1.00 55.00 55.00
1352 C.I. grating 150x150 mm cum 1.00 480.00 480.00
9977 C.I. cover and frame 300x300 mm inside Carriage of materials cum 4.50 2.12 9.54
4.1.11 Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone cum 0.08 5660.45 452.84
6.1.1 aggregate 40 mm nominal size) sqm 0.13 6882.00 894.66
4.2.3 0.68x0.68x0.10 m = 0.046 cum 0.008 9375.20 75.00
13.9.1 Concrete around trap 0.30x0.30x0.675 m = 0.061 cum 0.30 386.55 115.97
Total =0.107 cum Deduct: 2238.00
0.322÷3x[0.09+0.023+(0.09x0.023)1/2]= 0.017 cum 7.00
3.14/4x(0.124)²x0.485 = 0.006 cum 2245.00
Total = 0.023 cum 99.27
Net quantity 0.107 cum (-) 0.023 cum = 0.084 cum say 0.08 cum 2344.27
Rate as per item no 4.1.11 of SH : Concrete Work 120.87
Brick work with 75 class designation brick in cement mortar 1:4 (1 2465.14
cement :4 coarse sand) 9.27
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum Rate as per item no 2474.40
6.1.1 of SH : Brick Work 2474.40
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement :
[1/2x0.337x(1.20+0.60)] = 0.303 sqm. say 0.30 sqm
Rate as per item no 13.9.1 of SH : Finishing TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of each
Say

19.4.2.2 With sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


1902 Details of cost of one gully tarp each each 1.00 155.00 155.00
1366 S.W. gully trap P type 150x100 mm each L.S. 1.00 55.00 55.00
1352 C.I. grating 150x150 mm cum 1.00 480.00 480.00
9977 C.I. cover and frame 300x300 mm inside Carriage of materials cum 4.50 2.12 9.54
4.1.11 Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone cum 0.08 5660.45 452.84
6.36.1 aggregate 40 mm nominal size) sqm 0.13 6528.70 848.73
4.2.3 0.68x0.68x0.10 m = 0.046 cum 0.008 9375.20 75.00
13.9.1 Concrete around trap 0.30x0.30x0.675 m = 0.061 cum 0.30 386.55 115.97
Total =0.107 cum Deduct: 2192.07
0.322÷3x[0.09+0.023+(0.09x0.023)1/2] = 0.017 cum 7.00
3.14/4x(0.124)²x0.485 = 0.006 cum 2199.07
Total= 0.023 cum 99.27
Net quantity 0.107 cum (-) 0.023 cum = 0.084 cum say 0.08 cum 2298.34
Rate as per item no 4.1.11 of SH : Concrete Work 120.87
Brick work with sewer bricks conforming to IS:4885 in cement mortar 1:4 2419.21
(1 cement :4 coarse sand) 9.27
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum Rate as per item No 2428.47
6.36.1 of SH : Brick Work 2428.45
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement :
[1/2x0.337x(1.20+0.60)] = 0.303 sqm. say 0.30 sqm
Rate as per item no 13.9.1 of SH : Finishing TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of each
Say

19.4.3 180x150 mm size P type


19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


1904 Details of cost of one gully tarp each 1.00 230.00 230.00
1367 S.W. gully trap P type 180x150 mm each 1.00 65.00 65.00
1352 C.I. grating 180x180 mm each L.S. 1.00 480.00 480.00
9977 C.I. cover and frame 300x300 mm inside Carriage of materials 4.50 2.12 9.54
Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap 0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
Net quantity 0.107 cum (-) 0.026 cum = 0.081 cum say 0.08 cum

4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.08 5660.45 452.84
Brick work with 7.5 class designation brick in cement mortar 1:4 (1
cement : 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum. say 0.13 cum
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.13 6882.00 894.66
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.66x0.115x0.04 m =0.008 cum
4.2.3 Rate as per item no 4.2.3 of SH : Concrete Work cum 0.008 9375.20 75.00
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement :
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say 0.16 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 0.16 386.55 61.85
TOTAL 2268.89
Add 1 % Water charges on "W-A" 7.85
TOTAL 2276.73
Add GST on "X-A" (multiplying factor 0.1405) 111.33
TOTAL 2388.06
Add 15% CPOH on "Y-A" 135.56
TOTAL 2523.62
Add Cess @ 1% on "Z-A" 10.39
Cost of each 2534.01
Say 2534.00

19.4.3.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of one gully tarp
1904 S.W. gully trap P type 180x150 mm each 1.00 230.00 230.00
1367 C.I. grating 180x180 mm each 1.00 65.00 65.00
1352 C.I. cover and frame 300x300 mm inside each 1.00 480.00 480.00
9977 Carriage of materials L.S. 4.50 2.12 9.54
Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
Net quantity 0.107 cum (-) 0.026 cum = 0.081 cum say 0.08 cum
4.1.11 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.08 5660.45 452.84
Brick work with sewer bricks conforming to IS:4885 in cement
mortar 1:4 (1 cement : 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.13 6528.70 848.73
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m =0.008 cum
4.2.3 Rate as per item no 4.2.3 of SH : Concrete Work cum 0.008 9375.20 75.00
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement :
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say0.16 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 0.16 386.55 61.85
TOTAL 2222.96
Add 1 % Water charges on "W-A" 7.85
TOTAL 2230.80
Add GST on "X-A" (multiplying factor 0.1405) 111.33
TOTAL 2342.13
Add 15% CPOH on "Y-A" 135.56
TOTAL 2477.69
Add Cess @ 1% on "Z-A" 10.39
Cost of each 2488.08
Say 2488.10
19.5 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead a
of unserviceable materials into municipal dumps :
19.5.1 100 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.36 645.00 232.20
TOTAL 548.25
Add 1 % Water charges on "W" 5.48
TOTAL 553.73
Add GST on "X" (multiplying factor 0.1405) 77.80
TOTAL 631.53
Add 15% CPOH on "Y" 94.73
TOTAL 726.26
Add Cess @ 1% on "Z" 7.26
Cost of 10 metres 733.52
Cost of 1 metre 73.35
Say 73.35
19.5.2 150 mm diameter
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
LABOUR
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.45 645.00 290.25
TOTAL 606.30
Add 1 % Water charges on "W" 6.06
TOTAL 612.36
Add GST on "X" (multiplying factor 0.1405) 86.04
TOTAL 698.40
Add 15% CPOH on "Y" 104.76
TOTAL 803.16
Add Cess @ 1% on "Z" 8.03
Cost of 10 metres 811.19
Cost of 1 metre 81.12
Say 81.10
19.5.3 200 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.51 645.00 328.95
TOTAL 645.00
Add 1 % Water charges on "W" 6.45
TOTAL 651.45
Add GST on "X" (multiplying factor 0.1405) 91.53
TOTAL 742.98
Add 15% CPOH on "Y" 111.45
TOTAL 854.43
Add Cess @ 1% on "Z" 8.54
Cost of 10 metres 862.97
Cost of 1 metre 86.30
Say 86.30
19.5.4 250 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.57 645.00 367.65
TOTAL 683.70
Add 1 % Water charges on "W" 6.84
TOTAL 690.54
Add GST on "X" (multiplying factor 0.1405) 97.02
TOTAL 787.56
Add 15% CPOH on "Y" 118.13
TOTAL 905.69
Add Cess @ 1% on "Z" 9.06
Cost of 10 metres 914.75
Cost of 1 metre 91.47
Say 91.45
19.5.5 300 mm diameter
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
LABOUR
0114 Beldar day 0.49 645.00 316.05
0115 Coolie day 0.63 645.00 406.35
TOTAL 722.40
Add 1 % Water charges on "W" 7.22
TOTAL 729.62
Add GST on "X" (multiplying factor 0.1405) 102.51
TOTAL 832.14
Add 15% CPOH on "Y" 124.82
TOTAL 956.96
Add Cess @ 1% on "Z" 9.57
Cost of 10 metres 966.53
Cost of 1 metre 96.65
Say 96.65

19.5.6 350 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.60 645.00 387.00
0115 Coolie day 0.69 645.00 445.05
TOTAL 832.05
Add 1 % Water charges on "W" 8.32
TOTAL 840.37
Add GST on "X" (multiplying factor 0.1405) 118.07
TOTAL 958.44
Add 15% CPOH on "Y" 143.77
TOTAL 1102.21
Add Cess @ 1% on "Z" 11.02
Cost of 10 metres 1113.23
Cost of 1 metre 111.32
Say 111.30
19.5.7 400 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.75 645.00 483.75
TOTAL 909.45
Add 1 % Water charges on "W" 9.09
TOTAL 918.54
Add GST on "X" (multiplying factor 0.1405) 129.06
TOTAL 1047.60
Add 15% CPOH on "Y" 157.14
TOTAL 1204.74
Add Cess @ 1% on "Z" 12.05
Cost of 10 metres 1216.79
Cost of 1 metre 121.68
Say 121.70
19.5.8 450 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
LABOUR
0114 Beldar day 0.66 645.00 425.70
0115 Coolie day 0.81 645.00 522.45
TOTAL 948.15
Add 1 % Water charges on "W" 9.48
TOTAL 957.63
Add GST on "X" (multiplying factor 0.1405) 134.55
TOTAL 1092.18
Add 15% CPOH on "Y" 163.83
TOTAL 1256.01
Add Cess @ 1% on "Z" 12.56
Cost of 10 metres 1268.57
Cost of 1 metre 126.86
Say 126.85
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the prop
(1 cement : 2 fine sand) including testing of joints etc. complete :
19.6.1 100 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1700 R.C.C. pipes NP2 class 100 mm dia metre 10.00 210.00 2100.00
(in 2 m. length = 5 Nos.)
1714 R.C.C. collars NP2 class 100 mm dia each 5.00 35.00 175.00
5 Nos.
2275 Carriage of R.C.C. pipes 100 mm dia 100 metre 0.10 358.32 35.83
Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say
0.005 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.005 5000.00 25.00
2209 Carriage of Cement tonne 0.005 145.72 0.73
Fine sand for 5 joint = 0.0013x5 = 0.0065 cum = 0.006 cum
0983 Fine sand (zone IV) cum 0.006 900.00 5.40
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.006 163.93 0.98
LABOUR
0123 Mason (brick layer) 1st class day 0.32 784.00 250.88
0124 Mason (brick layer) 2nd class day 0.32 714.00 228.48
0114 Beldar day 0.63 645.00 406.35
0101 Bhisti day 0.16 714.00 114.24
TOTAL 3342.89
Add 1 % Water charges on "W" 33.43
TOTAL 3376.32
Add GST on "X" (multiplying factor 0.1405) 474.37
TOTAL 3850.70
Add 15% CPOH on "Y" 577.60
TOTAL 4428.30
Add Cess @ 1% on "Z" 44.28
Cost of 10 metres 4472.58
Cost of 1 metre 447.26
Say 447.25

19.6.2 150 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1701 R.C.C. pipes NP2 class 150 mm dia metre 10.00 220.00 2200.00
(in 2 m. length = 5 Nos.)
1715 R.C.C. collars NP2 class 150 mm dia each 5.00 37.00 185.00
5 Nos.
2281 Carriage of R.C.C. pipes 150 mm dia 100 metre 0.10 597.20 59.72
Cement of 5 joints = 5x0.0008 = 0.004 cum = 0.006 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.006 5000.00 30.00
2209 Carriage of Cement tonne 0.006 145.72 0.87
Fine sand for 5 joint = 0.0016x5 = 0.008 cum
0983 Fine sand (zone IV) cum 0.008 900.00 7.20
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.008 163.93 1.31
LABOUR
0123 Mason (brick layer) 1st class day 0.39 784.00 305.76
0124 Mason (brick layer) 2nd class day 0.39 714.00 278.46
0114 Beldar day 0.78 645.00 503.10
0101 Bhisti day 0.16 714.00 114.24
TOTAL 3685.67
Add 1 % Water charges on "W" 36.86
TOTAL 3722.52
Add GST on "X" (multiplying factor 0.1405) 523.01
TOTAL 4245.54
Add 15% CPOH on "Y" 636.83
TOTAL 4882.37
Add Cess @ 1% on "Z" 48.82
Cost of 10 metres 4931.19
Cost of 1 metre 493.12
Say 493.10
19.6.3 250 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1702 R.C.C. pipes NP2 class 250 mm dia metre 10.00 365.00 3650.00
(in 2 m. length = 5 Nos.)
1716 R.C.C. collars NP2 class 250 mm dia each 5.00 55.00 275.00
5 Nos.
2287 Carriage of R.C.C. pipes 250 mm dia 100 metre 0.10 1380.48 138.05
Cement of 5 joints = 5x0.0012 = 0.006 cum = 0.009tonne
0367 Portland Cement (OPC-43 grade) tonne 0.009 5000.00 45.00
2209 Carriage of Cement tonne 0.009 145.72 1.31
Fine sand for 5 joint = 0.0024x5 = 0.012 cum
0983 Fine sand (zone IV) cum 0.012 900.00 10.80
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.012 163.93 1.97
LABOUR
0123 Mason (brick layer) 1st class day 0.54 784.00 423.36
0124 Mason (brick layer) 2nd class day 0.54 714.00 385.56
0114 Beldar day 1.50 645.00 967.50
0101 Bhisti day 0.23 714.00 164.22
TOTAL 6062.77
Add 1 % Water charges on "W" 60.63
TOTAL 6123.39
Add GST on "X" (multiplying factor 0.1405) 860.34
TOTAL 6983.73
Add 15% CPOH on "Y" 1047.56
TOTAL 8031.29
Add Cess @ 1% on "Z" 80.31
Cost of 10 metres 8111.60
Cost of 1 metre 811.16
Say 811.15

19.6.4 300 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1703 R.C.C. pipes NP2 class 300 mm dia metre 10.00 450.00 4500.00
(in 2.5 m. length = 4 Nos.)
1717 R.C.C. collars NP2 class 300 mm dia each 4.00 56.00 224.00
4 Nos.
2290 Carriage of R.C.C. pipes 300 mm dia 100 metre 0.10 1706.30 170.63
Cement of 4 joints = 4x0.00185 = 0.0074 cum = 0.011 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.011 5000.00 55.00
2209 Carriage of Cement tonne 0.011 145.72 1.60
Fine sand for 4 joint = 0.0037x4 = 0.0148 say 0.015cum
0983 Fine sand (zone IV) cum 0.015 900.00 13.50
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.015 163.93 2.46
LABOUR
0123 Mason (brick layer) 1st class day 0.59 784.00 462.56
0124 Mason (brick layer) 2nd class day 0.59 714.00 421.26
0114 Beldar day 1.16 645.00 748.20
0101 Bhisti day 0.20 714.00 142.80
TOTAL 6742.01
Add 1 % Water charges on "W" 67.42
TOTAL 6809.43
Add GST on "X" (multiplying factor 0.1405) 956.73
TOTAL 7766.16
Add 15% CPOH on "Y" 1164.92
TOTAL 8931.08
Add Cess @ 1% on "Z" 89.31
Cost of 10 metres 9020.39
Cost of 1 metre 902.04
Say 902.05
19.6.5 450 mm dia. R.C.C. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1704 R.C.C. pipes NP2 class 450 mm dia metre 10.00 775.00 7750.00
(in 2.5 m. length = 4 Nos.)
1718 R.C.C. collars NP2 class 450 mm dia each 4.00 110.00 440.00
4 Nos.
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 0.10 3981.36 398.14
Cement of 4 joints = 4x0.0041 = 0.0164 cum = 0.024 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.024 5000.00 120.00
2209 Carriage of Cement tonne 0.024 145.72 3.50
Fine sand for 4 joint = 0.0082x4 = 0.033 cum
0983 Fine sand (zone IV) cum 0.033 900.00 29.70
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.033 163.93 5.41
LABOUR
0123 Mason (brick layer) 1st class day 0.75 784.00 588.00
0124 Mason (brick layer) 2nd class day 0.75 714.00 535.50
0114 Beldar day 1.50 645.00 967.50
0101 Bhisti day 0.33 714.00 235.62
TOTAL 11073.36
Add 1 % Water charges on "W" 110.73
TOTAL 11184.10
Add GST on "X" (multiplying factor 0.1405) 1571.37
TOTAL 12755.46
Add 15% CPOH on "Y" 1913.32
TOTAL 14668.78
Add Cess @ 1% on "Z" 146.69
Cost of 10 metres 14815.47
Cost of 1 metre 1481.55
Say 1481.55

19.6.6 500 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1705 R.C.C. pipes NP2 class 500 mm dia metre 10.00 950.00 9500.00
(in 2.5 m. length = 4 Nos.)
1719 R.C.C. collars NP2 class 500 mm dia each 4.00 120.00 480.00
4 Nos.
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 0.10 3981.36 398.14
Cement of 4 joints = 4x0.0045 = 0.018 cum = 0.026 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.026 5000.00 130.00
2209 Carriage of Cement tonne 0.026 145.72 3.79
Fine sand for 4 joints = 0.0089x4 = 0.0356 cum = 0.036 cum
0983 Fine sand (zone IV) cum 0.036 900.00 32.40
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.036 163.93 5.90
LABOUR
0123 Mason (brick layer) 1st class day 0.81 784.00 635.04
0124 Mason (brick layer) 2nd class day 0.81 714.00 578.34
0114 Beldar day 1.62 645.00 1044.90
0101 Bhisti day 0.33 714.00 235.62
TOTAL 13044.13
Add 1 % Water charges on "W" 130.44
TOTAL 13174.57
Add GST on "X" (multiplying factor 0.1405) 1851.03
TOTAL 15025.59
Add 15% CPOH on "Y" 2253.84
TOTAL 17279.43
Add Cess @ 1% on "Z" 172.79
Cost of 10 metres 17452.23
Cost of 1 metre 1745.22
Say 1745.20
19.6.7 600 mm dia. R.C.C. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1706 R.C.C. pipes NP2 class 600 mm dia (in 2.5 m. length = 4 Nos.)
metre 10.00 1150.00 11500.00
1720 R.C.C. collars NP2 class 600 mm dia 4 Nos. each 4.00 145.00 580.00
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 0.10 5972.04 597.20
Cement of 4 joints = 4x0.0054 = 0.0216 cum = 0.032 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.032 5000.00 160.00
2209 Carriage of Cement tonne 0.032 145.72 4.66
Fine sand for 4 joints = 0.0108x4 = 0.043 cum
0983 Fine sand (zone IV) cum 0.043 900.00 38.70
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.043 163.93 7.05
LABOUR
0123 Mason (brick layer) 1st class day 0.92 784.00 721.28
0124 Mason (brick layer) 2nd class day 0.92 714.00 656.88
0114 Beldar day 1.83 645.00 1180.35
0101 Bhisti day 0.33 714.00 235.62
TOTAL 15681.75
Add 1 % Water charges on "W" 156.82
TOTAL 15838.56
Add GST on "X" (multiplying factor 0.1405) 2225.32
TOTAL 18063.88
Add 15% CPOH on "Y" 2709.58
TOTAL 20773.46
Add Cess @ 1% on "Z" 207.73
Cost of 10 metres 20981.20
Cost of 1 metre 2098.12
Say 2098.10

19.6.8 700 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1707 R.C.C. pipes NP2 class 700 mm dia metre 10.00 1500.00 15000.00
(in 2.5 m. length = 4 Nos.)
1721 R.C.C. collars NP2 class 700 mm dia each 4.00 160.00 640.00
4 Nos.
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 0.10 5972.04 597.20
Cement of 4 joints = 4x0.0062 = 0.0248 cum = 0.037 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.037 5000.00 185.00
2209 Carriage of Cement tonne 0.037 145.72 5.39
Fine sand for 4 joints = 0.0124x4 = 0.0496 cum = 0.05 cum
0983 Fine sand (zone IV) cum 0.05 900.00 45.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.05 163.93 8.20
LABOUR
0123 Mason (brick layer) 1st class day 1.03 784.00 807.52
0124 Mason (brick layer) 2nd class day 1.03 714.00 735.42
0114 Beldar day 2.06 645.00 1328.70
0101 Bhisti day 0.42 714.00 299.88
TOTAL 19652.31
Add 1 % Water charges on "W" 196.52
TOTAL 19848.84
Add GST on "X" (multiplying factor 0.1405) 2788.76
TOTAL 22637.60
Add 15% CPOH on "Y" 3395.64
TOTAL 26033.24
Add Cess @ 1% on "Z" 260.33
Cost of 10 metres 26293.57
Cost of 1 metre 2629.36
Say 2629.35
19.6.9 800 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1709 R.C.C. pipes NP2 class 800 mm dia metre 10.00 1825.00 18250.00
(in 2.5 m. length = 4 Nos.)
1723 R.C.C. collars NP2 class 800 mm dia each 4.00 225.00 900.00
4 Nos.
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 0.10 5972.04 597.20
Cement of 4 joints = 4x0.0072 = 0.0288 cum = 0.042 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.042 5000.00 210.00
2209 Carriage of Cement tonne 0.042 145.72 6.12
Fine sand for 4 joints = 0.0143x4 = 0.0572 cum = 0.057 cum
0983 Fine sand (zone IV) cum 0.057 900.00 51.30
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.057 163.93 9.34
LABOUR
0123 Mason (brick layer) 1st class day 1.14 784.00 893.76
0124 Mason (brick layer) 2nd class day 1.14 714.00 813.96
0114 Beldar day 2.28 645.00 1470.60
0101 Bhisti day 0.42 714.00 299.88
TOTAL 23502.17
Add 1 % Water charges on "W" 235.02
TOTAL 23737.19
Add GST on "X" (multiplying factor 0.1405) 3335.08
TOTAL 27072.27
Add 15% CPOH on "Y" 4060.84
TOTAL 31133.10
Add Cess @ 1% on "Z" 311.33
Cost of 10 metres 31444.44
Cost of1 metre 3144.44
Say 3144.45

19.6.10 900 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1710 R.C.C. pipes NP2 class 900 mm dia metre 10.00 2550.00 25500.00
(in 2.5 m. length = 4 Nos.)
1724 R.C.C. collars NP2 class 900 mm dia each 4.00 240.00 960.00
4 Nos.
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 0.10 8958.06 895.81
Cement of 4 joints = 4x0.0082 = 0.0328 cum = 0.0488 t Say
0.049
0367 Portland Cement (OPC-43 grade) tonne 0.049 5000.00 245.00
2209 Carriage of Cement tonne 0.049 145.72 7.14
Fine sand for 4 joints = 0.0164x4 = 0.066 cum
0983 Fine sand (zone IV) cum 0.066 900.00 59.40
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.066 163.93 10.82
LABOUR
0123 Mason (brick layer) 1st class day 1.25 784.00 980.00
0124 Mason (brick layer) 2nd class day 1.25 714.00 892.50
0114 Beldar day 3.00 645.00 1935.00
0101 Bhisti day 0.50 714.00 357.00
TOTAL 31842.67
Add 1 % Water charges on "W" 318.43
TOTAL 32161.09
Add GST on "X" (multiplying factor 0.1405) 4518.63
TOTAL 36679.73
Add 15% CPOH on "Y" 5501.96
TOTAL 42181.68
Add Cess @ 1% on "Z" 421.82
Cost of 10 metres 42603.50
Cost of 1 metre 4260.35
Say 4260.35
19.6.11 1000 mm dia. R.C.C. pipe
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metre
MATERIAL
1711 R.C.C. pipes NP2 class 1000 mm dia metre 10.00 2950.00 29500.00
(in 2.5 m. length = 4 Nos.)
1725 R.C.C. collars NP2 class 1000 mm dia each 4.00 295.00 1180.00
4 Nos.
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre 0.10 11944.08 1194.41
Cement of 4 joints = 4x0.0092 = 0.0368 cum = 0.055 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.055 5000.00 275.00
2209 Carriage of Cement tonne 0.055 145.72 8.01
Fine sand for 4 joints = 0.0185x4 = 0.074 cum
0983 Fine sand (zone IV) cum 0.074 900.00 66.60
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.074 163.93 12.13
LABOUR
0123 Mason (brick layer) 1st class day 1.36 784.00 1066.24
0124 Mason (brick layer) 2nd class day 1.36 714.00 971.04
0114 Beldar day 4.33 645.00 2792.85
0101 Bhisti day 0.50 714.00 357.00
TOTAL 37423.28
Add 1 % Water charges on "W" 374.23
TOTAL 37797.52
Add GST on "X" (multiplying factor 0.1405) 5310.55
TOTAL 43108.07
Add 15% CPOH on "Y" 6466.21
TOTAL 49574.28
Add Cess @ 1% on "Z" 495.74
Cost of 10 metres 50070.02
Cost of 1 metre 5007.00
Say 5007.00

19.6.12 1100 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1712 R.C.C. pipes NP2 class 1100 mm dia metre 10.00 3250.00 32500.00
(in 2.5 m. length = 4 Nos.)
1726 R.C.C. collars NP2 class 1100 mm dia each 4.00 315.00 1260.00
4 Nos.
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre 0.10 11944.08 1194.41
Cement of 4 joints = 4x0.0103 =0.0412 cum = 0.061 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.061 5000.00 305.00
2209 Carriage of Cement tonne 0.061 145.72 8.89
Fine sand for 4 joints = 0.0206x4 = 0.0824 cum = 0.082 cum
0983 Fine sand (zone IV) cum 0.082 900.00 73.80
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.082 163.93 13.44
LABOUR
0123 Mason (brick layer) 1st class day 1.47 784.00 1152.48
0124 Mason (brick layer) 2nd class day 1.47 714.00 1049.58
0114 Beldar day 6.30 645.00 4063.50
0101 Bhisti day 0.60 714.00 428.40
TOTAL 42049.50
Add 1 % Water charges on "W" 420.49
TOTAL 42469.99
Add GST on "X" (multiplying factor 0.1405) 5967.03
TOTAL 48437.03
Add 15% CPOH on "Y" 7265.55
TOTAL 55702.58
Add Cess @ 1% on "Z" 557.03
Cost of 10 metress 56259.61
Cost of 1 metre 5625.96
Say 5625.95
19.6.13 1200 mm dia. R.C.C. pipe

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metre
MATERIAL
1713 R.C.C. pipes NP2 class 1200 mm dia metre 10.00 3575.00 35750.00
(in 2.5 m. length = 4 Nos.)
1727 R.C.C. collars NP2 class 1200 mm dia each 4.00 375.00 1500.00
4 Nos.
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre 0.10 11944.08 1194.41
Cement of 4 joints = 4x0.0114 = 0.0456 cum = 0.068 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.068 5000.00 340.00
2209 Carriage of Cement tonne 0.068 145.72 9.91
Fine sand for 4 joints = 0.0229x4 = 0.0916 cum = 0.092 cum
0983 Fine sand (zone IV) cum 0.092 900.00 82.80
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna
sand) cum 0.092 163.93 15.08
LABOUR
0123 Mason (brick layer) 1st class day 1.59 784.00 1246.56
0124 Mason (brick layer) 2nd class day 1.59 714.00 1135.26
0114 Beldar day 8.67 645.00 5592.15
0101 Bhisti day 0.67 714.00 478.38
TOTAL 47344.55
Add 1 % Water charges on "W" 473.45
TOTAL 47817.99
Add GST on "X" (multiplying factor 0.1405) 6718.43
TOTAL 54536.42
Add 15% CPOH on "Y" 8180.46
TOTAL 62716.89
Add Cess @ 1% on "Z" 627.17
Cost of 10 metres 63344.05
Cost of 1 metre 6334.41
Say 6334.40
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :
sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone ag
mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and ma
channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cem
complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover a
be not less than 38 kg (weight of cover 23 kg and weight
of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.43 6326.05 2720.20
Brick work with bricks of class designation 7.5 in foundation &
plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
Total = 0.340 cum
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.34 6882.00 2339.88
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m)² = (-) 0.02 cum
= 0.16 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.16 7365.15 1178.42
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 0.25 386.55 96.64
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.22 10719.30 2358.25
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.41 645.00 -264.45
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 10.57 88.95 940.20
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
= 0.442 sqm Say 0.44 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.44 766.55 337.28
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
0124 Mason (brick layer) 2nd class day 0.06 714.00 42.84
1354 Rectangular cover 455x610 mm with frame (low duty) each 1.00 1400.00 1400.00
(inside)
9977 Carriage of C.I. cover & frame L.S. 6.76 2.12 14.33
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 11253.63
Add 1 % Water charges on "W-A" 12.83
TOTAL 11266.45
Add GST on "X-A" (multiplying factor 0.1405) 182.03
TOTAL 11448.48
Add 15% CPOH on "Y-A" 221.64
TOTAL 11670.13
Add Cess @ 1% on "Z-A" 16.99
Cost of each 11687.12
Say 11687.10
19.7.1.2 With Sewer bricks conforming to IS : 4885
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 manhole
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.43 6326.05 2720.20
Brick work with sewer bricks conforming to IS:4885 in cement
mortar 1:4 (1 cement :4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
Total= 0.340 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.34 6528.70 2219.76
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m)² = (-) 0.02 cum
Total= 0.16 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.16 7365.15 1178.42
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 0.25 386.55 96.64
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.22 10719.30 2358.25
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.41 645.00 -264.45
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 10.57 88.95 940.20
Form work = 0.90x0.80 = 0.72 sqm
= 0.442 sqm Say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.44 766.55 337.28
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
0124 Mason (brick layer) 2nd class day 0.06 714.00 42.84
1354 Rectangular cover 455x610 mm with frame (low duty) each 1.00 1400.00 1400.00
(inside)
9977 Carriage of C.I. cover & frame L.S. 6.76 2.12 14.33
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 13.52 2.12 28.66
TOTAL 11133.51
Add 1 % Water charges on "W-A" 12.83
TOTAL 11146.33
Add GST on "X-A" (multiplying factor 0.1405) 182.03
TOTAL 11328.36
Add 15% CPOH on "Y-A" 221.64
TOTAL 11550.00
Add Cess @ 1% on "Z-A" 16.99
Cost of each 11567.00
Say 11567.00
19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and
not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
MATERIAL
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.55 6326.05 3479.33
Brick work with bricks of class designation 7.5 in foundation &
plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)²x0.23m =(-) 0.008 cum
Total= 0.934 cum Say 0.93 cum
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.93 6882.00 6400.26
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
Total= 0.249 cum say 0.25
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.25 7365.15 1841.29
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.09 sqm
= 2.19 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.19 386.55 846.54
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)²x0.15m = (-) 0.029 cum
= 0.31 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.31 10719.30 3322.98
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.58 645.00 -374.10
Mild steel reinforcement for slab :
0.31 cum @ 80.09 kg/cum = 24.83 kg kg 24.83 88.95 2208.63
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.88 766.55 674.56
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.08 784.00 62.72
0124 Mason (brick layer) 2nd class day 0.08 714.00 57.12
1356 500 mm dia cover with frame (medium duty) each 1.00 4400.00 4400.00
9977 Carriage of C.I. cover & frame L.S. 6.76 2.12 14.33
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 16.64 2.12 35.28
TOTAL 22983.27
Add 1 % Water charges on "W-A" 42.10
TOTAL 23025.37
Add GST on "X-A" (multiplying factor 0.1405) 597.37
TOTAL 23622.75
Add 15% CPOH on "Y-A" 727.37
TOTAL 24350.12
Add Cess @ 1% on "Z-A" 55.77
Cost of each 24405.88
Say 24405.90
19.7.2.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
MATERIAL
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.55 6326.05 3479.33
Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4
coarse sand)
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
= 0.934 cum Say 0.93 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.93 6528.70 6071.69
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
= 0.249 cum say 0.25
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.25 7365.15 1841.29
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.09sqm
= 2.19 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.19 386.55 846.54
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)²x0.15m = (-) 0.029 cum
= 0.31 cum cum 0.31 10719.30 3322.98
5.3 Rate as per item no 5.3 of SH : RCC Work
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.58 645.00 -374.10
Mild steel reinforcement for slab :
0.31 cum @ 80.09 kg/cum = 24.83 kg
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 24.83 88.95 2208.63
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.88 766.55 674.56
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.08 784.00 62.72
0124 Mason (brick layer) 2nd class day 0.08 714.00 57.12
1356 500 mm dia cover with frame (medium duty) each 1.00 4400.00 4400.00
9977 Carriage of C.I. cover & frame L.S. 6.76 2.12 14.33
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 16.64 2.12 35.28
TOTAL 22654.71
Add 1 % Water charges on "W-A" 42.10
TOTAL 22696.80
Add GST on "X-A" (multiplying factor 0.1405) 597.37
TOTAL 23294.18
Add 15% CPOH on "Y-A" 727.37
TOTAL 24021.55
Add Cess @ 1% on "Z-A" 55.77
Cost of each 24077.31
Say 24077.30
19.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and fr
not less than 208 kg (weight of cover 108 kg and weight
of frame 100 kg) :

19.7.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
MATERIAL
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.55 6326.05 3479.33
Brick work with bricks of class designation 7.5 in foundation &
plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
= 0.811 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
= 0.803 cum Say 0.80 cum
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work cum 0.80 6882.00 5505.60
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
= 0.249 cum say 0.25
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.25 7365.15 1841.29
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.41 386.55 931.59
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x0.15x0.15 m = 0.03 cum
Total= 0.369 cum
Less for cover 0.7854x(0.56)²x0.15m = (-) 0.037 cum
= 0.332 cum Say 0.33 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.33 10719.30 3537.37
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.62 645.00 -399.90
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 26.43 88.95 2350.95
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.83 766.55 636.24
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.08 784.00 62.72
0124 Mason (brick layer) 2nd class day 0.08 714.00 57.12
3860 560 mm dia cover with frame (Heavy duty) each 1.00 9100.00 9100.00
9977 Carriage of C.I. cover & frame L.S. 13.52 2.12 28.66
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 20.28 2.12 42.99
TOTAL 27188.28
Add 1 % Water charges on "W-A" 89.06
TOTAL 27277.34
Add GST on "X-A" (multiplying factor 0.1405) 1263.80
TOTAL 28541.14
Add 15% CPOH on "Y-A" 1538.82
TOTAL 30079.95
Add Cess @ 1% on "Z-A" 117.98
Cost of each 30197.93
Say 30197.95
19.7.3.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
MATERIAL
Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
4.1.8 Rate as per item no 4.1.8 of SH : Concrete Work cum 0.55 6326.05 3479.33
sewer bricks conforming to IS:4885 in cement mortar 1:4 (1
cement :4 coarse sand)
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
Total= 0.811 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
= 0.803 cum Say 0.80 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.80 6528.70 5222.96
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
= 0.249 cum say 0.25
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete Work cum 0.25 7365.15 1841.29
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
Total= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 2.41 386.55 931.59
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand
: 3 graded stone aggregate 20 mm nominal size)
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x
0.15x0.15 m = 0.03 cum
= 0.369 cum
Less for cover 0.7854x(0.56)²x0.15m = (-) 0.037 cum
= 0.332 cum Say 0.33 cum
5.3 Rate as per item no 5.3 of SH : RCC Work cum 0.33 10719.30 3537.37
Less labour for not lifting the materilas upto floor five level
0115 Coolie day -0.62 645.00 -399.90
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work kg 26.43 88.95 2350.95
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work sqm 0.83 766.55 636.24
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.08 784.00 62.72
0124 Mason (brick layer) 2nd class day 0.08 714.00 57.12
3860 560 mm dia cover with frame (Heavy duty) each 1.00 9100.00 9100.00
9977 Carriage of C.I. cover & frame L.S. 13.52 2.12 28.66
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 2.12 14.33
9999 Sundries L.S. 20.28 2.12 42.99
TOTAL 26905.64
Add 1 % Water charges on "W-A" 89.06
TOTAL 26994.70
Add GST on "X-A" (multiplying factor 0.1405) 1263.80
TOTAL 28258.50
Add 15% CPOH on "Y-A" 1538.82
TOTAL 29797.31
Add Cess @ 1% on "Z-A" 117.98
Cost of each 29915.29
Say 29915.30
19.8 Extra for depth for manholes :
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre MATERIAL
Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1
cement : 4 coarse sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum Rate as per item no. 6.1.1
of S.H : brick work 6813.18
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 1314.27
6.1.1 floating coat of neat cement cum 0.99 6882.00
8127.45
13.9.1 3.40x1 m = 3.40 sqm sqm 3.40 386.55
8127.45
Rate as per item no 13.9.1 of SH : Finishing TOTAL 8127.45
Cost for one metre
Say

19.8.1.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre MATERIAL
Brick work with modular extruded brunt fly ash clay sewer bricks
conforming to IS : 4885 in cement mortar 1:4 (1 cement : 4 coarse
sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum Rate as per item No 6.36.1
of SH : Brick Work 6463.41
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 1314.27
6.36.1 cum 0.99 6528.70
floating coat of neat cement 7777.68
13.9.1 sqm 3.40 386.55
3.40x1 m = 3.40 sqm 7777.68
Rate as per item no 13.9.1 of SH : Finishing TOTAL 7777.70
Cost for one metre
Say

19.8.2 Size 120x90 cm


19.8.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre MATERIAL
Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1
cement 4: coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum Rate as per item no. 6.1.1
of S.H : brick work 8120.76
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 1623.51
6.1.1 floating coat of neat cement cum 1.18 6882.00
9744.27
13.9.1 4.20x1 m = 4.20 sqm sqm 4.20 386.55
9744.27
Rate as per item no 13.9.1 of SH : Finishing TOTAL 9744.25
Cost for one metre
Say
of S.H : brick work 8120.76
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 1623.51
6.1.1 floating coat of neat cement cum 1.18 6882.00
9744.27
13.9.1 4.20x1 m = 4.20 sqm sqm 4.20 386.55
9744.27
Rate as per item no 13.9.1 of SH : Finishing TOTAL 9744.25
Cost for one metre
Say

19.8.2.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre MATERIAL
Brick work with modular extruded brunt fly ash clay sewer bricks
conforming to IS :4885 in cement mortar 1:4 (1 cement: 4 coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum Rate as per item No 6.36.1
of SH : Brick Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 7703.87
floating coat of neat cement 1623.51
6.36.1 cum 1.18 6528.70
4.20x1 m = 4.20 sqm 9327.38
13.9.1 sqm 4.20 386.55
Rate as per item no 13.9.1 of SH : Finishing TOTAL 9327.38
Cost for one metre 9327.40
Say

19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4
sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation c
1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cem
coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, tot
cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size
centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :

19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size)
1.67x1.67x0.225 m = 0.63 cum
Rate as per item no 4.1.6 of SH : Concrete Work
Brick work with bricks of class designation 75 in cement mortar 1:4 (1
4.1.6 cement : 4 coarse sand) cum 0.63 6670.25 4202.26
Curved on plan 3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
Total= 0.557
Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.230x0.10 m =
0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53 Rate as per item no 6.1.1 of
SH : Brick Work
Brick work in arches with 7.5 class designation brick in cement mortar 1:3
( 1 cement : 3 fine sand )
2x½x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
Rate as per item no 6.9 of SH : Brick Work
6.1.1 Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone cum 0.53 6882.00 3647.46
aggregate 20 mm nominal size ) cum 0.02 13378.10 267.56
For benching : 3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
6.9 Total = 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2² = (-) 0.016 cum
= 0.119 cum Say 0.12 cum
Rate as per item no. 4.1.3 of SH : concrete Work
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate : 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15 m =0.123
cum
4.1.3 Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum Total = 0.086 cum cum 0.12 7365.15 883.82
Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x
3.14x0.15 = 0.57 sqm
Total= 1.75 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15 m =0.123
cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum Total = 0.086 cum
Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x
4.2.3 3.14x0.15 = 0.57 sqm cum 0.09 9375.20 843.77
Total= 1.75 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :

13.9.1 sqm 1.75 386.55 676.46

0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
0124 Mason (brick layer) 2nd class day 0.06 714.00 42.84
S.F.R.C cover
7135 Circular shape 560 mm dia precast R.C.C. manhole cover with
frame - H.D. - 20 each 1.00 880.00 880.00
9977 CARRIAGE L.S. 6.89 2.12 14.61
9999 Sundries L.S. 16.9 2.12 35.83
TOTAL 11541.64
Add 1 % Water charges on "W-A" 10.20
TOTAL 11551.85
Add GST on "X-A" (multiplying factor 0.1405) 144.79
TOTAL 11696.63
Add 15% CPOH on "Y-A" 176.30
TOTAL 11872.93
Add Cess @ 1% on "Z-A" 13.52
Cost of one manhole 11886.45
Say 11886.45

19.9.1.2 With Sewer bricks conforming to IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 manhole
MATERIAL
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate: 40 mm nominal size)
1.67x1.67x0.225 m = 0.63 cum
4.1.6 Rate as per item no 4.1.6 of SH : Concrete Work cum 0.63 6670.25 4202.26
Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4
coarse sand)
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
Duduct arch ring and portion of pipe
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work cum 0.53 6528.70 3460.21
Brick work in arches with modular extruded brunt fly ash clay
sewer bricks conforming to IS : 4885 in cement mortar 1:3 ( 1
cement : 3 fine sand )
2x½x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
6.37 Rate as per item No 6.37 of SH : Brick Work cum 0.02 11763.25 235.27
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size )
For benching :
3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
Total= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)² = (-) 0.016 cum
Total= 0.119 cum Say 0.12 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete Work cum 0.12 7365.15 883.82
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum
Total = 0.086 cum Say 0.09 cum
4.2.3 Rate as per item no 4.2.3 of SH : Concrete Work cum 0.09 9375.20 843.77
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x3.14x
0.15 = 0.57 sqm
Total= 1.75 sqm

13.9.1 Rate as per item no 13.9.1 of SH : Finishing sqm 1.75 386.55 676.46
LABOUR
Extra labour for making channel :
0123 Mason (brick layer) 1st class day 0.06 784.00 47.04
0124 Mason (brick layer) 2nd class day 0.06 714.00 42.84
S.F.R.C cover
7135 Circular shape 560 mm dia precast R.C.C. manhole cover with
frame - H.D. - 20 each 1.00 880.00 880.00
9977 CARRIAGE L.S. 6.89 2.12 14.61
9999 Sundries L.S. 16.90 2.12 35.83
TOTAL 11322.10
Add 1 % Water charges on "W-A" 10.20
TOTAL 11332.30
Add GST on "X-A" (multiplying factor 0.1405) 144.79
TOTAL 11477.09
Add 15% CPOH on "Y-A" 176.30
TOTAL 11653.38
Add Cess @ 1% on "Z-A" 13.52
Cost of one manhole 11666.90
Say 11666.90
19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


6.1.1 Detail of cost of 0.76 m depth cum 0.63 6882.00 4335.66
4.1.3 Brick work in foundation with 7.5 class designation bricks in cement cum 0.01 7365.15 73.65
13.9.1 mortar 1:4 (1 cement : 4 coarse sand) sqm 2.33 386.55 900.66
Rate as per item no 6.1.1 of SH : Brick Work 5309.97
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 6986.81
20mm nominal size) 6986.80
Rate as per item no 4.1.3 of SH : Concrete Work
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with neat
cement.
Rate as per item no 13.9.1 of SH : Finishing Cost for 0.76 metre
Cost for 1.00 metre
Say

19.10.2 With Sewer bricks conforming IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


6.36.1 Detail of cost of 0.76 m extra depth cum 0.63 6528.70 4113.08
4.1.3 Brick work with modular extruded brunt fly ash clay sewer bricks cum 0.01 7365.15 73.65
13.9.1 (Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sqm 2.33 386.55 900.66
sand) 5087.39
Rate as per item No 6.36.1 of SH : Brick Work 6693.94
Cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone 6693.95
20mm nominal size)
Rate as per item no 4.1.3 of SH : Concrete Work
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement.
Rate as per item no 13.9.1 of SH : Finishing Cost for 0.76 metre
Cost for 1.00 metre
Say
6.36.1 Detail of cost of 0.76 m extra depth cum 0.63 6528.70 4113.08
4.1.3 Brick work with modular extruded brunt fly ash clay sewer bricks cum 0.01 7365.15 73.65
13.9.1 (Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sqm 2.33 386.55 900.66
sand) 5087.39
Rate as per item No 6.36.1 of SH : Brick Work 6693.94
Cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone 6693.95
20mm nominal size)
Rate as per item no 4.1.3 of SH : Concrete Work
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement.
Rate as per item no 13.9.1 of SH : Finishing Cost for 0.76 metre
Cost for 1.00 metre
Say

19.11 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coars
inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concret
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coars
graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total
cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the
external surface shall be paid for separately) :

19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Code Description Unit Quantity Rate Rs. Amount Rs.
4.1.6 Details of cost for 1 manhole MATERIAL cum 1.18 6670.25 7870.90
6.1.1 Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone cum 1.29 6882.00 8877.78
6.9 aggregate 40mm nominal size) cum 0.02 13378.10 267.56
4.1.3 1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum Rate as per item no 4.1.6 cum 0.26 7365.15 1914.94
4.2.3 of SH : Concrete Work cum 0.09 9375.20 843.77
13.9.1 Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1 sqm 4.48 386.55 1731.74
0123 cement : 4 coarse sand) day day 0.10 784.00 78.40
0124 Curved on plan 3.14x1.45x0.24x0.23 = 0.251 each L.S. 0.10 714.00 71.40
7135 3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 L.S. 1.00 880.00 880.00
9977 Total= 1.320 6.89 2.12 14.61
9999 Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.230x0.10 m = 16.9 2.12 35.83
0.018 cum 22586.92
2x3.14/4x(0.15)²x0.230 = 0.008 cum 10.80
Total = 0.026 cum 22597.73
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum Rate as per item no 153.29
6.1.1 of SH : Brick Work 22751.02
Brick work in arches with 7.5 class designation brick in cement mortar 186.65
1:3 ( 1 cement : 3 coarse sand ) 22937.67
2x½x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum 14.31
Rate as per item no 6.9 of SH : Brick Work 22951.97
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone 22951.95
aggregate 20 mm nominal size )
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)³
=0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum Total= 0.2554 cum Say
0.26 cum
Rate as per item no. 4.1.3 of SH : concrete Work
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15 m =0.123
cum
Less cover 3.14/4x(0.28)² x 0.15 m : (-) = 0.037 cum Total= 0.086 cum
Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete Work
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
Total= 4.483 sqm Say 4.48 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C manhole cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C manhole cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say

19.11.1.2 With Sewer bricks conforming IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.6 Details of cost for 1 manhole MATERIAL cum 1.18 6670.25 7870.90
6.36.1 Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone cum 1.29 6528.70 8422.02
6.37 aggregate : 40 mm nominal size) cum 0.02 11763.25 235.27
4.1.3 1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum Rate as per item no 4.1.6 cum 0.26 7365.15 1914.94
4.2.3 of SH : Concrete Work cum 0.09 9375.20 843.77
13.9.1 Brick work with modular extruded brunt fly ash clay sewer bricks in sqm 4.48 386.55 1731.74
0123 cement mortar 1:4 (1 cement : 4 coarse sand) day day 0.10 784.00 78.40
0124 Curved on plan 3.14x1.45x0.24x0.23 = 0.251 each L.S. 0.10 714.00 71.40
7135 3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 L.S. 1.00 880.00 880.00
9977 Total = 1.320 6.89 2.12 14.61
9999 Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.230x0.10 m = 16.9 2.12 35.83
0.018 cum 22098.87
2x3.14/4x(0.15)²x0.230 = 0.008 cum 10.80
Total= 0.026 cum 22109.67
Net quantity 1.320-0.026 = 1.294 153.29
Say 1.29 cum 22262.96
Rate as per item No 6.36.1 of SH : Brick Work 186.65
Brick work in arches with modular extruded brunt fly ash clay sewer 22449.61
bricks in cement mortar 1:3 ( 1 cement : 3 fine sand ) 14.31
2x½x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum Rate as 22463.92
per item No 6.37 of SH : Brick Work 22463.90
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ) For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)³
=0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-)
= 0.0216 cum
Total= 0.2554 cum Say 0.26 cum
Rate as per item no. 4.1.3 of SH : concrete Work
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4(1.020)²x0.15 m =0.123
cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-) 0.037 cum Total= 0.086 cum
Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
Total= 4.483 sqm Say 4.48 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C manhole cover and frame
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say
Total= 4.483 sqm Say 4.48 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C manhole cover and frame
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say

19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost of 0.61 m extra depth
Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1
cement : 4 coarse sand)
Rate as per item no 6.1.1 of SH : Brick Work 4542.12
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 989.57
6.1.1 cum 0.66 6882.00
floating coat of neat cement. 5531.69
13.9.1 sqm 2.56 386.55
Rate as per item no 13.9.1 of SH : Finishing Cost for 0.61 metre 9068.34
Cost for 1.00 metre 9068.35
Say

19.12.2 With Sewer bricks conforming IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost of 0.61 m extra depth
Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse
sand) 4308.94
Rate as per item No 6.36.1 of SH : Brick Work 989.57
6.36.1 12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with cum 0.66 6528.70
5298.51
13.9.1 floating coat of neat cement. sqm 2.56 386.55
8686.08
Rate as per item no 13.9.1 of SH : Finishing Cost for 0.61 metre 8686.10
Cost for 1.00 metre
Say

19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coar
inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concret
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel
in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total
cover and frame to be not less than 182 kg. fixed in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excav
rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
19.13.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.6 Details of cost for 1 manhole MATERIAL cum 2.25 6670.25 15008.06
6.1.1 Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone cum 3.68 6882.00 25325.76
6.9 aggregate 40 mm nominal size) cum 0.04 13378.10 535.12
4.1.3 2.74x2.74x0.30 m = 2.25 cum cum 0.42 7365.15 3093.36
4.2.3 Rate as per item no 4.1.6 of SH : Concrete Work cum 0.09 9375.20 843.77
13.9.1 Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1 sqm 7.61 386.55 2941.65
0123 cement : 4 coarse sand) day day 0.10 784.00 78.40
0124 Curved on plan 3.14x1.98x0.25x0.46 = 0.716 cum each L.S. 0.10 714.00 71.40
7135 3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum L.S. 1.00 880.00 880.00
9977 Total = 3.735 cum 6.89 2.12 14.61
9999 Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.46x0.10 m = 16.90 2.12 35.83
0.036 cum 48827.96
2x3.14/4x(0.15)²x0.460 = 0.016 cum 10.80
Total= 0.052 cum 48838.76
Net quantity 3.735-0.052 = 3.683 cum 153.29
Say 3.68 cum 48992.05
Rate as per item no 6.1.1 of SH : Brick Work 186.65
Brick work in arches with 7.5 class designation brick in cement mortar 49178.70
1:3 (1 cement : 3 coarse sand ) 14.31
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum 49193.01
Rate as per item no 6.9 of SH : Brick Work 49193.00
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size )
For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum [(2x8.133)/360]x(4/3)x3.14x(0.76)³
=0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum Total= 0.419 cum Say
0.42 cum
Rate as per item no. 4.1.3 of SH : concrete
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15 m =0.123
cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-) 0.037 cum Total= 0.086 cum
Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say

19.13.1.2 With Sewer bricks conforming IS : 4885


Code Description Unit Quantity Rate Rs. Amount Rs.
4.1.6 Details of cost for 1 manhole MATERIAL cum 2.25 6670.25 15008.06
6.36.1 Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone cum 3.68 6528.70 24025.62
6.37 aggregate 40 mm nominal size) cum 0.04 11763.25 470.53
4.1.3 2.74x2.74x0.30 m = 2.25 cum cum 0.42 7365.15 3093.36
4.2.3 Rate as per item no 4.1.6 of SH : Concrete Work cum 0.09 9375.20 843.77
13.9.1 Brick work with bricks modular extruded brunt fly ash clay sewer bricks sqm 7.61 386.55 2941.65
0123 in cement mortar 1:4 (1 cement : 4 coarse sand) day day 0.10 784.00 78.40
0124 Curved on plan 3.14x1.98x0.25x0.46 = 0.716 cum each L.S. 0.10 714.00 71.40
7135 3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum L.S. 1.00 880.00 880.00
9977 Total= 3.735 cum 6.89 2.12 14.61
9999 Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.46x0.10 m = 16.90 2.12 35.83
0.036 cum 47463.22
2x3.14/4x(0.15)²x0.460 = 0.016 cum 10.80
Total= 0.052 cum 47474.02
Net quantity 3.735-0.052 = 3.683 cum 153.29
Say 3.68 cum 47627.31
Rate as per item No 6.36.1 of SH : Brick Work 186.65
Brick work in arches with modular extruded brunt fly ash clay sewer 47813.96
bricks in cement mortar 1:3 ( 1 cement : 3 fine sand ) 14.31
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum Rate as 47828.27
per item No 6.37 of SH : Brick Work 47828.25
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ) For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum [(2x8.133)/360]x(4/3)x3.14x(0.76)³
=0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum
= 0.419 cum Say 0.42 cum
Rate as per item no. 4.1.3 of SH : concrete
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d² x thickness 3.14/4x(1.020)²x0.15 m =0.123
cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-) 0.037 cum Net Quantity=
0.086 cum Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
Rate as per item no 13.9.1 of SH : Finishing LABOUR
Extra labour for making channel :
Mason (brick layer) 1st class Mason (brick layer) 2nd class
S.F.R.C cover
Circular shape 560 mm dia precast R.C.C. manhole cover with frame -
H.D. - 20
CARRIAGE
Sundries TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one manhole
Say

19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
19.14.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost of 1.88 m extra depth
Brick work with bricks of class designation 7.5 in cement mortar 1:4 (1
cement: 4 coarse sand)
Rate as per item no 6.1.1 of SH : Brick Work 36199.32
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with 3475.08
6.1.1 cum 5.26 6882.00
floating coat of neat cement 39674.40
13.9.1 sqm 8.99 386.55
Rate as per item no 13.9.1 of SH : Finishing Cost for 1.88 metre 21103.41
Cost for 1.00 metre 21103.40
Say

19.14.2 With Sewer bricks conforming IS : 4885

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost of 1.88 m extra depth
Brick work with modular extruded brunt fly ash clay sewer bricks
(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement: 4 coarse
sand) 34340.96
Rate as per item No 6.36.1 of SH : Brick Work 3475.08
6.36.1 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with cum 5.26 6528.70
37816.05
13.9.1 floating coat of neat cement sqm 8.99 386.55
20114.92
Rate as per item no 13.9.1 of SH : Finishing Cost for 1.88 metre 20114.90
Cost for 1.00 metre
Say

19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 grad
aggregate 20 mm nominal size) as per standard design :
19.15.1 With 20x20 mm square bar

Code Description Unit Quantity Rate Rs. Amount Rs.


1006 Details of cost for one M.S foot rests MATERIAL quintal L.S. 0.024 4850.00 116.40
9988 M.S. 20 mm square bar 0.75 m @ 3.137 kg/m = 0.024 Mild steel square day day 1.82 2.12 3.86
0103 bars cum 0.10 714.00 71.40
0114 Carriage, painting, and other sundries LABOUR for fabrication day day day 0.10 645.00 64.50
4.2.5 Blacksmith 2nd class Beldar 0.004 8843.45 35.37
0123 Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone 0.02 784.00 15.68
0124 aggregate : 20 mm nominal size) 0.02 714.00 14.28
0114 0.20x0.20x0.10 m = 0.004 cum 0.05 645.00 32.25
Rate as per item no 4.2.5 of SH : Concrete work LABOUR for fixing M.S. 353.74
foot rests 3.18
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 356.93
TOTAL 45.18
Add 1 % Water charges on "W-A" TOTAL 402.10
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 55.01
Add 15% CPOH on "Y-A" TOTAL 457.11
Add Cess @ 1% on "Z-A" Cost for 1 no. 4.22
Say 461.33
461.35

19.15.2 With 20 mm diameter round bar

Code Description Unit Quantity Rate Rs. Amount Rs.


1003 Details of cost for one M.S foot rests MATERIAL quintal L.S. 0.018 4750.00 85.50
9988 M.S. round brass20 mm dia 0.75 m @ 2.47kg/m = 0.018 q Mild steel day day 1.82 2.12 3.86
0103 round bar above 12 mm dia cum 0.10 714.00 71.40
0114 Carriage,painting, and other sundries Labour for fabrication day day day 0.10 645.00 64.50
4.2.5 Blacksmith 2nd class Beldar 0.004 8843.45 35.37
0123 Cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone 0.02 784.00 15.68
0124 aggregate : 20 mm nominal size) 0.02 714.00 14.28
0114 0.20x0.20x0.10 m = 0.004 cum 0.05 645.00 32.25
Rate as per item no 4.2.5 of SH : Concrete work LABOUR 322.84
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 2.87
TOTAL 325.72
Add 1 % Water charges on "W-A" TOTAL 40.79
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 366.51
Add 15% CPOH on "Y-A" TOTAL 49.67
Add Cess @ 1% on "Z-A" Cost for 1 no. 416.18
Say 3.81
419.99
420.00

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conformi
1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space betw
protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 1
per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanen
identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sa
graded stone aggregate 20 mm nominal size)
complete as per design.

Code Description Unit Quantity Rate Rs. Amount Rs.


7354 Details of cost for one no. MATERIAL each L.S. 1.00 110.00 110.00
9988 Plastic encapsuled M.S. foot rest 30x20x15 cm cum 1.82 2.12 3.86
4.2.5 Carriage and other sundries day day day 0.009 8843.45 79.59
0123 Cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone 0.02 784.00 15.68
0124 aggregate 20 mm nominal size) 0.20 714.00 142.80
0114 ( 0.30x0.20x0.15 = 0.009 cum) 0.05 645.00 32.25
Rate as per item no 4.2.5 of SH : Concrete work LABOUR 384.18
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 3.05
TOTAL 387.23
Add 1 % Water charges on "W-A" TOTAL 43.22
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 430.45
Add 15% CPOH on "Y-A" TOTAL 52.63
Add Cess @ 1% on "Z-A" Cost for 1 no. 483.08
Say 4.03
487.11
487.10

19.17 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks
cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size):
19.17.1 With 20x20 mm square bar

Code Description Unit Quantity Rate Rs. Amount Rs.


1006 Details of cost for one M.S foot rests MATERIAL quintal L.S. 0.024 4850.00 116.40
9988 M.S. 20 mm square bar 0.75 m @ 3.137 kg/m =0.024 q day day 1.82 2.12 3.86
0103 Mild steel square bars Carriage,painting, and other sundries Labour for cum 0.10 714.00 71.40
0114 fabrication day day day 0.10 645.00 64.50
4.2.5 Blacksmith 2nd class Beldar 0.004 8843.45 35.37
0123 Cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone 0.05 784.00 39.20
0124 aggregate 20 mm nominal size) 0.05 714.00 35.70
0114 0.20x0.20x0.10 m = 0.004 cum 0.1 645.00 64.50
Rate as per item no 4.2.5 of SH : Concrete work LABOUR 430.93
for dismantling old forts rest cutting holes and fixing new M.S. foot rests 3.96
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 434.89
TOTAL 56.13
Add 1 % Water charges on "W-A" TOTAL 491.02
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 68.35
Add 15% CPOH on "Y-A" TOTAL 559.37
Add Cess @ 1% on "Z-A" Cost for 1 no. 5.24
Say 564.61
564.60

19.17.2 With 20 mm diameter round bar

Code Description Unit Quantity Rate Rs. Amount Rs.


1003 Details of cost for one M.S foot rests MATERIAL quintal L.S. 0.018 4750.00 85.50
9988 M.S. roumd bars 20 mm dia 0.75 m @ 2.47 kg/m =0.018 q day day 1.82 2.12 3.86
0103 Mild steel round bar above 12 mm dia Carriage,painting, and other cum 0.10 714.00 71.40
0114 sundries Labour for fabrication day day day 0.10 645.00 64.50
4.2.5 Blacksmith 2nd class Beldar 0.004 8843.45 35.37
0123 Cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone 0.05 784.00 39.20
0124 aggregate 20 mm nominal size) 0.05 714.00 35.70
0114 0.20x0.20x0.10 m = 0.004 cum 0.10 645.00 64.50
Rate as per item no 4.2.5 of SH : Concrete work LABOUR 400.03
for dismantling old forts rest cutting holes and fixing new M.S. foot rests 3.65
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 403.68
TOTAL 51.75
Add 1 % Water charges on "W-A" TOTAL 455.43
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 63.01
Add 15% CPOH on "Y-A" TOTAL 518.43
Add Cess @ 1% on "Z-A" Cost for 1 no. 4.83
Say 523.26
523.25

19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Code Description Unit Quantity Rate Rs. Amount Rs.


1355 Details of cost for one cover MATERIAL each L.S. 1.00 910.00 910.00
9977 Rectangular cover 455x610mm without frame (low duty) Carriage of C.I. day 7.15 2.12 15.16
0114 Manhole cover 0.12 645.00 77.40
LABOUR 1002.56
Beldar TOTAL 10.03
Add 1 % Water charges on "W" TOTAL 1012.58
Add GST on "X" (multiplying factor 0.1405) TOTAL 142.27
Add 15% CPOH on "Y" TOTAL 1154.85
Add Cess @ 1% on "Z" Cost for 1 cover 173.23
Say 1328.08
13.28
1341.36
1341.35

19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Code Description Unit Quantity Rate Rs. Amount Rs.


1357 Details of cost for one cover MATERIAL each L.S. 1.00 2300.00 2300.00
9977 500 mm dia cover without frame (medium duty) Carriage of C.I. cover day 13.47 2.12 28.56
0114 LABOUR 0.12 645.00 77.40
Beldar TOTAL 2405.96
Add 1 % Water charges on "W" TOTAL 24.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 2430.02
Add 15% CPOH on "Y" TOTAL 341.42
Add Cess @ 1% on "Z" Cost for 1 no. 2771.43
Say 415.71
3187.15
31.87
3219.02
3219.00

19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg
Code Description Unit Quantity Rate Rs. Amount Rs.
3861 Details of cost for one cover MATERIAL each L.S. 1.00 5100.00 5100.00
9977 560 mm dia cover without frame (Heavy duty) Carriage of C.I. cover day 16.12 2.12 34.17
0114 LABOUR 0.12 645.00 77.40
Beldar TOTAL 5211.57
Add 1 % Water charges on "W" TOTAL 52.12
Add GST on "X" (multiplying factor 0.1405) TOTAL 5263.69
Add 15% CPOH on "Y" TOTAL 739.55
Add Cess @ 1% on "Z" Cost for 1 no. 6003.24
Say 900.49
6903.72
69.04
6972.76
6972.75

19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
19.19.1 L D- 2.5
19.19.1.1 Rectangular shape 600x450 mm internal dimensions

Code Description Unit Quantity Rate Rs. Amount Rs.


7130 Details of cost for one no. MATERIAL each 1.00 675.00 675.00
4.1.3 Rectangular shape 600x450 mm precast R.C.C. manhole cover with cum L.S. 0.04 7365.15 294.61
9977 frame - L.D. - 2.5 L.S. 6.76 2.12 14.33
9999 Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 13.52 2.12 28.66
aggregate 20 mm nominal size ) 1012.60
1.00x0.85x0.15 = 0.1275 cum 7.18
Less cover with frame 0.85x0.70x0.15 = (-) 0.0893 cum 1019.78
= 0.0382 cum Say 0.04 cum 101.89
Rate as per item no. 4.1.3 of SH : Concrete Work Carriage of R.C.C 1121.67
cover with frame 124.06
Sundries TOTAL 1245.73
Add 1 % Water charges on "W-A" TOTAL 9.51
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1255.24
Add 15% CPOH on "Y-A" TOTAL 1255.25
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.19.1.2 Square shape 450 mm internal dimensions


Code Description Unit Quantity Rate Rs. Amount Rs.
7131 Details of cost for one no. each L.S. 1.00 575.00 575.00
9977 MATERIAL cum L.S. 6.76 2.12 14.33
4.1.3 Square shape 450x450 mm precast R.C.C. manhole cover with frame - 0.03 7365.15 220.95
9999 L.D. - 2.5 13.52 2.12 28.66
Carriage of manhole cover 838.95
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 6.18
aggregate 20 mm nominal size ) 845.13
0.725x0.725x0.15 = 0.0788 cum 87.70
Less cover with frame 0.575x0.575x0.15 = (-) 0.0496 cum 932.82
= 0.0292 cum Say 0.03 cum 106.78
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 1039.60
TOTAL 8.19
Add 1 % Water charges on "W-A" TOTAL 1047.79
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1047.80
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.19.1.3 Circular shape 450 mm internal diameter


Code Description Unit Quantity Rate Rs. Amount Rs.
7132 Details of cost for one no. MATERIAL each L.S. 1.00 575.00 575.00
9977 Circular shape 450 mm dia precast R.C.C. manhole cover with frame - cum L.S. 6.76 2.12 14.33
4.1.3 L.D. - 2.5 0.03 7365.15 220.95
9999 Carriage of manhole cover 13.52 2.12 28.66
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 838.95
aggregate 20 mm nominal size ) 3.14/4x(0.775)²x0.15 = 0.0708 cum 6.18
Less cover with frame 3.14/4x(0.625)²x0.15 = (-) 0.0460 cum 845.13
= 0.0248 cum Say 0.03 cum 87.70
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 932.82
TOTAL 106.78
Add 1 % Water charges on "W-A" TOTAL 1039.60
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 8.19
Add 15% CPOH on "Y-A" TOTAL 1047.79
Add Cess @ 1% on "Z-A" Cost for 1 no. 1047.80
Say

19.19.2 M D - 10
19.19.2.1 Square shape 450 mm internal dimension

Code Description Unit Quantity Rate Rs. Amount Rs.


7133 Details of cost for one no. each L.S. 1.00 670.00 670.00
9977 MATERIAL cum L.S. 6.76 2.12 14.33
4.1.3 Rectangular shape 500x500 mm precast R.C.C. manhole cover with 0.04 7365.15 294.61
9999 frame - M.D. - 10 16.64 2.12 35.28
Carriage of manhole cover 1014.21
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 7.20
aggregate 20 mm nominal size ) 1021.41
0.95x0.95x0.15 = 0.1354 cum 102.12
Less cover with frame 0.80x0.80x0.15 = (-) 0.096 cum 1123.53
= 0.0394 cum Say 0.04 cum 124.34
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 1247.86
TOTAL 9.53
Add 1 % Water charges on "W-A" TOTAL 1257.40
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1257.40
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.19.2.2 Circular shape 500 mm internal diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


7134 Details of cost for one no. MATERIAL each L.S. 1.00 575.00 575.00
9977 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - cum L.S. 6.76 2.12 14.33
4.1.3 M.D. - 10 0.03 7365.15 220.95
9999 Carriage of manhole cover 16.64 2.12 35.28
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 845.56
aggregate 20 mm nominal size ) 6.25
3.14/4x(0.95)²x0.15 = 0.1064 cum 851.81
Less cover with frame 3.14/4x(0.8)²x0.15 = (-) 0.0754 cum 88.63
= 0.031 cum Say 0.03 cum 940.44
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 107.92
TOTAL 1048.37
Add 1 % Water charges on "W-A" TOTAL 8.27
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1056.64
Add 15% CPOH on "Y-A" TOTAL 1056.65
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.19.3 H D - 20
19.19.3.1 Circular shape 560 mm internal diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


7135 Details of cost for one no. MATERIAL each L.S. 1.00 880.00 880.00
9977 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - cum L.S. 13.52 2.12 28.66
4.1.3 H.D. - 20 0.03 7365.15 220.95
9999 Carriage of manhole cover 20.28 2.12 42.99
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 1172.61
aggregate 20 mm nominal size ) 9.52
3.14/4x(1.05)²x0.15 = 0.1299 cum 1182.13
Less cover with frame 3.14/4x(0.9)²x0.15 = (-) 0.0955 cum 135.04
= 0.0344 cum Say 0.03 cum 1317.17
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 164.43
TOTAL 1481.60
Add 1 % Water charges on "W-A" TOTAL 12.61
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1494.21
Add 15% CPOH on "Y-A" TOTAL 1494.20
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.19.4 EHD - 35
19.19.4.1 Circular shape 560 mm internal dia

Code Description Unit Quantity Rate Rs. Amount Rs.


7136 Details of cost for one no. MATERIAL each L.S. 1.00 1170.00 1170.00
9977 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - cum L.S. 13.52 2.12 28.66
4.1.3 E.H.D. - 35 0.03 7365.15 220.95
9999 Carriage of manhole cover 20.28 2.12 42.99
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone 1462.61
aggregate 20 mm nominal size ) 12.42
3.14/4x(1.05)²x0.15 = 0.1299 cum 1475.03
Less cover with frame 3.14/4x(0.9)²x0.15 = (-) 0.0955 cum 176.20
= 0.0344 cum Say 0.03 cum 1651.22
Rate as per item no. 4.1.3 of SH : Concrete Work Sundries 214.54
TOTAL 1865.76
Add 1 % Water charges on "W-A" TOTAL 16.45
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1882.21
Add 15% CPOH on "Y-A" TOTAL 1882.20
Add Cess @ 1% on "Z-A" Cost for 1 no.
Say

19.20 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Code Description Unit Quantity Rate Rs. Amount Rs.


1353 Details of cost for one cover each L.S. 1.00 477.00 477.00
9988 MATERIAL day 2.70 2.12 5.72
0114 C.I.cover without frame 300x300mm inside i.e.cover of 4.50 kg 0.03 645.00 19.35
Carriage for cover LABOUR 502.07
Beldar TOTAL 5.02
Add 1 % Water charges on "W" TOTAL 507.09
Add GST on "X" (multiplying factor 0.1405) TOTAL 71.25
Add 15% CPOH on "Y" TOTAL 578.34
Add Cess @ 1% on "Z" Cost for 1 cover 86.75
Say 665.09
6.65
671.74
671.75

19.21 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement c
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cemen
sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.3 Details of cost for one connection cum 0.01 7365.15 73.65
13.9.1 MATERIAL sqm 0.25 386.55 96.64
0123 cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone day day day 0.12 784.00 94.08
0124 aggregate 20 mm nominal size) L.S. 0.12 714.00 85.68
0114 = 0.30x0.30x0.23 m = 0.0207 cum 0.25 645.00 161.25
9999 Less pipe = 1/2x3.14x0.23x0.23x0.23 = 0.0096 cum 20.15 2.12 42.72
= 0.0111 cum Say 0.01 cum 554.02
Rate as per item no. 4.1.3 of SH : Concrete 3.84
12 mm cement plater 1:3 ( 1 cement : 3 coarse sand ) finished with a 557.85
floating coat of neat cement 54.45
2x0.35x0.35 =0.25sqm 612.31
Rate as per item no 13.9.1 of SH : Finishing LABOUR 66.30
(For cutting holes average size 30x30 cm in 23 cm thick wall and 678.61
making channel etc.) 5.08
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 683.69
Add for delay sundries etc. TOTAL 683.70
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 connection
Say

19.21.2 For pipes 250 to 300 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.3 Details of cost for one connection MATERIAL cum 0.02 7365.15 147.30
13.9.1 Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grade stone sqm 0.32 386.55 123.70
0123 aggregate 20 mm nominal size ) day day day 0.12 784.00 94.08
0124 = 0.35x0.35x0.30 m = 0.037 cum L.S. 0.12 714.00 85.68
0114 Less pipe = 1/2x3.14x0.30x0.30x0.30 = 0.021 cum 0.25 645.00 161.25
9999 = 0.016 cum Say 0.02 cum 20.67 2.12 43.82
Rate as per item no. 4.1.3 of SH : Concrete Work 655.83
12 mm cement plater 1:3 ( 1 cement : 3 coarse sand ) finished with a 3.85
floating coat of neat cement 659.68
2x0.40x0.40 =0.32 sqm 54.61
Rate as per item no 13.9.1 of SH : Finishing LABOUR 714.29
(For cutting holes average size 30x30 cm in 23 cm thick wall and 66.49
making channel etc.) 780.78
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 5.10
Add for delay sundries etc. TOTAL 785.88
Add 1 % Water charges on "W-A" TOTAL 785.90
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 connection
Say

19.21.3 For pipes 350 to 450 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.3 Details of cost for one connection MATERIAL cum 0.03 7365.15 220.95
13.9.1 Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grade stone sqm 0.60 386.55 231.93
0123 aggregate 20 mm nominal size ) day day 0.16 784.00 125.44
0124 = 0.50x0.50x0.30 m = 0.075 cum day L.S. 0.16 714.00 114.24
0114 Less pipe = 1/2x3.14x0.45x0.45x0.30 = 0.048 cum 0.33 645.00 212.85
9999 = 0.027 cum Say 0.03 cum 26.91 2.12 57.05
Rate as per item no. 4.1.3 of SH : Concrete Work 962.46
12 mm cement plater 1:3 ( 1 cement : 3 coarse sand ) finished with a 5.10
floating coat of neat cement 967.56
2x0.55x0.55 =0.605 sqm Say 0.60 sqm Rate as per item no 13.9.1 of 72.31
SH : Finishing LABOUR 1039.87
(For cutting holes average size 30x30 cm in 23 cm thick wall and 88.05
making channel etc.) 1127.92
Mason (brick layer) 1st class Mason (brick layer) 2nd class 6.75
Beldar 1134.67
Add for delay sundries etc. TOTAL 1134.65
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 1 connection
Say

19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection
cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded
aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1
: 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iro
fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W.
pipe, making required channels complete as per standard design and specifications :

19.22.1 100 mm dia sand cast iron drop connection

Code Description Unit Quantity Rate Rs. Amount Rs.


1617 Details of cost for one drop connection each 0.55556 1135.00 630.56
9977 MATERIAL L.S. 1.43 2.12 3.03
18.83.2 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: each cut each 3.00 160.70 482.10
1336 100mm dia each each 1.00 44.00 44.00
1621 = 38+30+33 =101 cm say 1 metre cum 1.00 280.00 280.00
1628 Length of pipe = 1m. Hence, Qty = 1 /1.8 =0.55556 Nos Carriage of pipe cum 1.00 405.00 405.00
6.1.1 Cutting charges sqm 0.007 6882.00 48.17
4.1.11 Rate as per item no 18.83.2 of SH: Water supply Clearing eye with each L.S. 0.21 5660.45 1188.69
13.9.1 chain and lid 100 mm dia sqm L.S. 0.06 386.55 23.19
12.39.1 S.C.I. plain bend 100 mm dia day day day 4.00 444.05 1776.20
9999 S.C.I. plain single equal junctions 100x100x100 mm dia Brick work in 26.91 2.12 57.05
5.9.2 cement mortar 1:4 (1 cement : 4 coarse sand) 0.20x0.20x0.23 = 0.009 1.36 669.55 910.59
9988 cum 26.91 2.12 57.05
0123 Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002 cum Net Qty= 0.009 - 0.002 0.70 784.00 548.80
0124 = 0.007 cum 0.70 714.00 499.80
0114 Rate as per item no 6.1.1 of SH : Brick Work 2.70 645.00 1741.50
Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone 8695.74
aggregate 40 mm nominal size) 42.67
0.40x0.45x1.05 m = 0.189 cum 8738.41
0.40x0.25x0.40 = 0.040 cum 605.48
Total= 0.229 cum Less pipe portion 9343.89
1/2x3.14x0.10x0.10x1.50 = 0.012 cum 737.24
Toothing portion 10081.13
2x0.40x0.05x0.10 m = 0.004 cum = 0.016 cum 56.52
Net Qty= 0.229-0.016 = 0.213 cum Say 0.21 cum Rate as per item no 10137.65
4.1.11 of SH : Concrete Work 10137.65
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Rate as per item no 13.9.1 of SH : Finishing
Providing lead caulked joints to 100 mm diameter pipe and special
Rate as per item no. 12.39.1 of SH : Roofing
Providing joint to S.W. pipe with cement mortar 1:1 (1 cement : 1 fine
sand)
Form work
1.30x1.05 m = 1.36 sqm
Rate as per item no 5.9.2 of SH : RCC Sundries including carriage of
bends etc. LABOUR
For cutting holes 5 cm deep in alternate course of brick work benching
and channel
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one drop connection
Say

19.22.2 150 mm dia sand cast iron drop connection

Code Description Unit Quantity Rate Rs. Amount Rs.


1618 Details of cost for one drop connection MATERIAL each 0.55556 1750.00 972.23
9977 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: L.S. 1.82 2.12 3.86
18.83.4 150mm dia each cut each 3.00 301.90 905.70
1337 = 34.5+30+37 =101.5cm say 1.00m each each 1.00 50.00 50.00
1622 Length of pipe = 1m. Hence, Qty = 1 / 1.8 =0.55556 No.s Carriage of cum 1.00 475.00 475.00
7087 pipe cum 1.00 570.00 570.00
6.1.1 Cutting charges sqm 0.005 6882.00 34.41
4.1.11 Rate as per item no 18.83.4 of SH Water Supply Clearing eye with chain each L.S. 0.28 5660.45 1584.93
13.9.1 and lid 150 mm dia sqm L.S. 0.06 386.55 23.19
12.39.2 S.C.I. plain bend 150 mm dia day day day 4.00 604.65 2418.60
9999 S.C.I. Tee 150 mm 39.91 2.12 84.61
5.9.2 Brick work in cement mortar 1:4 (1 cement : 4 coarse sand) 1.67 669.55 1118.15
9988 0.20x0.20x0.23 = 0.009 cum 34.06 2.12 72.21
0123 Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004 cum Net Qty= 0.005 cum 0.85 784.00 666.40
0124 Rate as per item no 6.1.1 of SH : Brick Work 0.85 714.00 606.90
0114 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone 3.50 645.00 2257.50
aggregate 40 mm nominal size) 11843.68
0.45x0.50x1.15 m = 0.259 cum 57.59
0.45x0.25x0.45 = 0.0510 cum 11901.27
= 0.310 cum Less pipe portion 817.19
1/4x3.14x0.15x0.15x1.50 = 0.027 cum 12718.46
Toothing portion 3x0.45x0.05x0.10 m = 0.004 cum 995.02
= 0.027 + 0.004 = 0.031 cum 13713.48
Net Qty 0.310-0.031 = 0.279 cum. Say 0.28 cum Rate as per item no 76.29
4.1.11 of SH : Concrete 13789.77
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with 13789.75
floating coat of neat cement
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Rate as per item no 13.9.1 of SH : Finishing
Providing lead caulked joints to 150 mm diameter pipe and special
Rate as per item no. 12.39.2 of SH : Roofing
Providing joint to S.W. pipe with cement mortar 1:1 (1 cement : 1 fine
sand)
Form work
1.450x1.15 m = 1.67 sqm
Rate as per item no 5.9.2 of SH : RCC Sundries including carriage of
bends etc. LABOUR
For cutting holes 45 holes 5 cm deep toothing in alternate course of
brick work benching and making channel Mason (brick layer) 1st class
Mason (brick layer) 2nd class Beldar
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one drop connection
Say

19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete:

19.23.1 For 100 mm dia sand cast iron drop connection

Code Description Unit Quantity Rate Rs. Amount Rs.


1617 Details of cost for one metre MATERIAL each 0.55556 1135.00 630.56
9977 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: L.S. 13.39 2.12 28.39
4.1.11 100mm dia cum 0.16 5660.45 905.67
5.9.2 Length of pipe = 1m. Hence, Qty = 1 / 1.8 = 0.55556 Nos. Carriage of sqm L.S. 1.30 669.55 870.42
9999 material and fixing charges day 7.15 2.12 15.16
0123 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone day day 0.04 784.00 31.36
0124 aggregate 40 mm nominal size) 0.04 714.00 28.56
0114 0.40x0.45x1.00 mm = 0.18 cum 0.04 645.00 25.80
Less pipe portion 1/2x3.14x0.10x0.10x1.00 = 0.008 cum 2535.91
Toothing portion 5x0.40x0.05x0.10 m = 0.010 cum 7.60
Total= 0.018 cum 2543.51
Net Qty= 0.18-0.018 = 0.162 cum Say 107.82
0.16 cum 2651.33
Rate as per item no 4.1.11 of SH : Concrete Work Form work 131.29
1.30x1.00 m = 1.30 sqm 2782.62
Rate as per item no 5.9.2 of SH : RCC Sundries 10.07
LABOUR 2792.69
For cutting holes 5 cm deep in alternate course of brick work Mason 2792.70
(brick layer) 1st class
Mason (brick layer) 2nd class
Beldar TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one metre
Say

19.23.2 For 150 mm dia sand cast iron drop connection

Code Description Unit Quantity Rate Rs. Amount Rs.


1618 Details of cost for one metre MATERIAL each 0.55556 1750.00 972.23
9977 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: L.S. 13.39 2.12 28.39
4.1.11 150mm dia cum 0.20 5660.45 1132.09
5.9.2 Length of pipe = 1m. Hence, Qty sqm L.S. 1.45 669.55 970.85
9999 = 1 / 1.8 = 0.55556 Nos. day day day 8.09 2.12 17.15
0123 Carriage of material and fixing charges 0.05 784.00 39.20
0124 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone 0.05 714.00 35.70
0114 aggregate 40 mm nominal size) 0.05 645.00 32.25
0.45x0.50x1.00 mm = 0.225 cum 3227.86
Less pipe portion 1/2x3.14x0.15x0.15x1.00 = 0.018 cum 11.25
Toothing portion 5x0.45x0.05x0.10 m = 0.011 cum 3239.10
Total = 0.029 cum 159.63
Net 0.225-0.029 = 0.196 cum Say 0.20 cum 3398.74
Rate as per item no 4.1.11 of SH : Concrete Work Form work 194.37
1.45x1.00 m = 1.45 sqm 3593.11
Rate as per item no 5.9.2 of SH : RCC Sundries 14.90
LABOUR 3608.01
For cutting 5 cm deep in alternate course of brick work Mason (brick 3608.00
layer) 1st class
Mason (brick layer) 2nd class Beldar
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one metre
Say

19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposa
unserviceable materials within 50 m lead as per direction of Engineer-in-charge:
19.24.1 Rectangular manhole 90x80 cm and 45 cm deep

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost of a manhole 90x80 cm and 45 cm deep Dismantling of
cement concrete 1:4:8 (1 cement : 4 coarse sand 8 : aggregate stone 40
mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Rate as per item no. 15.2.2 of SH : Dismantling and demolishing
15.2.2 Dismantling of secon class brick work in cement mortar 1:4 (1 cement : cum 0.43 1239.60 533.03
4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)² x0.23m = (-) 0.008 cum Net Qty 0.348 -
0.008 = 0.340 cum
15.7.4 Rate as per item no. 15.7.4 of SH :dismantling and dimolishing cum 0.34 1698.45 577.47
15.2.1 Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 cum 0.16 2007.10 321.14
15.3 graded stone aggregate 20 mm nominal size) cum L.S. 0.22 2928.10 644.18
9999 For benching 2x0.90x(0.80/2) x(0.30+0.20)/2 = 0.18 cum Less for pipe 7.15 2.12 15.16
1x0.90x3.14/4x(0.15m)² = (-) 0.02 cum 2090.98
Net qty= 0.16 cum 0.15
Rate as per item no. 15.2.1 of SH : Dismantling and demolishing 2091.13
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 grade 2.15
stone aggregate 20 mm nominal size) 2093.28
For slab : 1.36x1.26x0.15m = 0.257 cum 2.62
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum Net qty= 0.215 cum 2095.90
Say 0.22 cum 0.20
Rate as per item no 15.3 of SH : Demolishing and dismantling 2096.10
Removal of C.I. Cover with frame TOTAL 2096.10
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.24.2 Rectangular manhole 120x90 cm and 90 cm deep

Code Description Unit Quantity Rate Rs. Amount Rs.


15.2.2 Details of cost of a manhole 120x90 and 90 cm deep Dismantling of cum 0.55 1239.60 681.78
15.7.4 cement concrete 1:4:8 (1 cement : 4 coarse sand 8 : aggregate stone 40 cum 0.93 1698.45 1579.56
15.2.1 mm nominal size) cum 0.25 2007.10 501.78
15.3 1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum cum L.S. 0.31 2928.10 907.71
9999 Rate as per item no. 15.2.2 of SH : Dismantling and demolishing 7.15 2.12 15.16
Dismantling of secon class brick work in cement mortar 1:4 (1 cement : 3685.98
4 coarse sand) 0.15
5.12x0.23x0.80 m = 0.942 cum 3686.13
Less for pipe 2x3.14x(0.15m)²x0.23 m = (-) 0.008 cum Net qty = 0.934 2.15
cum Say 0.93 cum 3688.29
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing 2.62
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 3690.90
graded stone aggregate 20 mm nominal size) 2x1.20x0.90x(0.80/2) x 0.20
(0.30+0.20)/2 = 2.70 cum 3691.10
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum 3691.10
= 0.249 cum say 0.25
Rate as per item no. 15.2.1 of SH : Dismantling and demolishing
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum Net qty = 0.31 cum
Rate as per item no 15.3 of SH : Demolishing and dismantling
Removal of C.I. Cover with frame TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.24.3 Rectangular arch type manhole 140x90 cm and 2.45 m deep

Code Description Unit Quantity Rate Rs. Amount Rs.


15.2.2 Details of cost of a manhole 140x90 cm and 2.45 m deep cum 0.72 1239.60 892.51
15.7.4 Dismantling of cement concrete 1:4:8 (1 cement : 4 coarse sand 8 : cum 2.89 1698.45 4908.52
15.2.1 aggregate stone 40 mm nominal size) cum 0.29 2007.10 582.06
15.3 2.16m x 1.66m x 0.20m = 0.72 cum cum L.S. 0.19 2928.10 556.34
9999 Rate as per item no. 15.2.2 of SH : Dismantling and demolishing L.S. 7.15 2.12 15.16
9999 Dismantling of second class brick work in cement mortar 1:4 (1 cement : 8.06 2.12 17.09
4 coarse sand) 6971.68
Brick work in item 5.52mx0.23mx1.20m = 1.524 cum 0.32
3.92mx0.23mx1.15m = 1.037 cum = 2.561 cum Deduct arch ring and 6972.00
portion of pipe 2x½x3.14x0.25mx0.23x0.1m = 0.018 cum 4.58
2x3.14/4(0.15)²x0.23m = 0.008 cum = (-) 0.026 cum Net qty = 2.561 - 6976.57
0.026 = 2.535 cum 5.57
Say 2.54 cum Brick work in arch 6982.15
½x3.14x1.13x0.80x0.23m = 0.327 cum 0.43
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum 6982.57
= 0.345 cum Say 0.35 cum 6982.55
Net qty = 2.54+0.35 = 2.89 cum
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum
Less pipe 1.4x3.14/4x(0.15)² = (-) 0.025 cum Net qty = 0.290 cum
Rate as per item no. 15.2.1 of SH : Dismantling and demolishing
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum
= 0.187 cum Say 0.19 cum
Rate as per item no 15.3 of SH : Demolishing and dismantling
Removal of C.I. Cover with frame Removal of M.S foot rest
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.24.4 Circular manhole 122 cm diameter and 1.68 m deep


Code Description Unit Quantity Rate Rs. Amount Rs.
15.2.1 Details of cost of a manhole 1.22 m internal diameter 1.68 m deep cum 1.18 2007.10 2368.38
15.7.4 Dismantling of cement concrete 1:3:6 (1 cement : 3 coarse sand cum 1.31 1698.45 2224.97
15.2.1 : 6 aggregate stone 40 mm nominal size) 1.98x1.98x0.30 m = 1.178 cum L.S. 0.35 2007.10 702.49
9999 cum Say 1.18 cum Rate as per item no 15.2.1 of SH : Dismantling L.S. 7.15 2.12 15.16
9999 Dismantling of second class brick work in cement mortar 1:4 (1 cement : 8.06 2.12 17.09
4 coarse sand) 5328.08
Curved on plan 3.14x1.45x0.24x0.23 = 0.251 0.32
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 5328.40
= 1.320 4.58
Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.23x0.10 m = 5332.98
0.018 cum 5.57
2x3.14/4x(0.15)²x0.23 = 0.008 cum 5338.55
= 0.026 cum 0.43
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum Brick work in arches 5338.97
2x1/2x3.14x0.25 m x0.230x0.10 m 5338.95
= 0.018 cum Say 0.02 cum
Total = 1.294+0.02 = 1.1.314 cum. Say 1.131 cum
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing
Dismantaling cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
gradeed stone aggregate 20 mm nominal size)
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)³
Total =0.043 cum
0.024 + 0.043 = 0.277 cum
Less pipe :1.22x3.14/4x(0.15)² = (-) 0.0216 cum Net Qty. = 0.277 -
0.0216 = 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover
3.14/4x(0.28)² x 0.15 m : = (-) 0.037 cum
= 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Rate as per item no 15.2.1 of SH : Demolishing and dismantling
Removal of S.F.R.C cover with frame size 560 mm diameter (medium
duty)
Removal of M.S. foot rests TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.25 Extra for depth of manholes dismantled :


19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth
Code Description Unit Quantity Rate Rs. Amount Rs.
15.7.4 Details of cost for one metre cum L.S. 0.99 1698.45 1681.47
9999 Dismantling of second class brick work in cement mortar 1:5 (1 1.82 2.12 3.86
Cement : 5 fine sand) 1685.32
4.32x0.23x1.0m = 0.994 cum Say 0.99 cum 0.04
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing 1685.36
Removing of M.S. foot rests TOTAL 0.55
Add 1 % Water charges on "W-A" TOTAL 1685.91
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 0.67
Add 15% CPOH on "Y-A" TOTAL 1686.58
Add Cess @ 1% on "Z-A" Cost for one metre 0.05
Say 1686.63
1686.65

19.25.2 Rectangular manhole 120x90 cm and beyond 90 cm depth


Code Description Unit Quantity Rate Rs. Amount Rs.
15.7.4 Details of cost for one metre
9999 Dismantling of second class brick work in cement mortar 1:5 (1
Cement : 5 fine sand)
5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing 2004.17
Removing of M.S. foot rests TOTAL 3.86
Add 1 % Water charges on "W-A" TOTAL 2008.03
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 0.04
Add 15% CPOH on "Y-A" TOTAL 2008.07
Add Cess @ 1% on "Z-A" Cost for one metre 1.18 1698.45 0.55
cum L.S.
Say 1.82 2.12 2008.62
0.67
2009.28
0.05
2009.33
2009.35

19.25.3 Rectangular arch type manhole 140x90 cm and beyond 2.45 m depth (up to 4.25 m depth)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1.80 metre
Dismantling IInd class brick work in cement mortar 1:4 (1 Cement : 4
Coarse sand) for 2.45 depth
Qty for 2.45m depth 5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum Total = 2.561 cum
Deduct arch ring and portion of pipe 2x½x3.14x0.25mx0.23x0.1m =
0.018 cum 2x3.14/4(0.15)²x0.23m = 0.008 cum
Total deduction= = (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum Total = 0.345 cum Say 0.35
cum
Totol for 4.45 m depth 2.54 + 0.35 = 2.89 cum Qty for 4.25m depth
5.52mx0.23mx1.20m = 1.524 cum 3.92mx0.23mx2.95m = 2.660 cum
Total = 4.184 cum
Deduct arch ring and portion of pipe 2x½x3.14x0.70mx0.23x0.1m =
0.051 cum 2x3.14/4x(0.60)²x0.23 = 0.130 cum
Total deduction== (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.70mx0.23x0.1m = 0.051 cum Total = 0.378 cum Say 0.38
cum
Total for 2.25 m depth = 4.0+ 0.38 =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
Rate as per item no. 15.7.4 of SH :dismantling and dimolishing
Dismantling cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4
graded stone aggregate 40mm nominal size)
Qty for 4.25m depth 2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.60)²(-) = 0.396 cum
= 0.486 cum Say 0.49 cum Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe :1.4x3.14/4x(0.15)²(-) = 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
Rate as per item no 15.2.1 of SH : Demolishing and dismantling
Cost for 1.8 metre depth Cost for 1 metre depth Say

2530.69
401.42
2932.11
15.7.4 cum 1.49 1698.45 1628.95
15.2.1 cum 0.20 2007.10 1628.95
19.25.4 Circular manhole 122 cm diameter and beyond 1.68 m depth (up to 2.29 m depth)
Code Description Unit Quantity Rate Rs. Amount Rs.
15.2.1 Details of cost for 0.61 metre cum 1.18 2007.10 2368.38
15.7.4 Dismantling cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 cum 1.97 1698.45 3345.95
15.2.1 graded stone aggregate 40mm nominal size) cum L.S. 0.35 2007.10 702.49
9999 1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum. L.S. 7.15 2.12 15.16
9999 (Rate as per item No.15.2.1 of SH. dismantling and Demolishing) each 8.09 2.12 17.15
19.24.4 Dismantling IInd class brick work in cement mortar 1:4 (1 Cement : 4 -1.00 5338.95 -5338.95
Coarse sand) 1110.17
Curved on plan 3.14x1.45x0.85x0.23 = 0.891 0.32
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 1110.49
Total = 0.891 + 1.069 = 1.96 cum 4.58
Duduct arch ring and portion of pipe 2x1/2x3.14x0.25mx0.23x0.10 m = 1115.08
0.018 cum 5.58
2x3.14/4x(0.15)²x0.23 = 0.008 cum 1120.66
Total deduction = 0.026 cum 0.43
Net quantity 1.96-0.026 = 1.934 Say 1.93 cum Qty in arch 1121.09
2x1/2x3.14x0.25 m x0.23x0.10 m 1837.85
= 0.018 cum Say 0.02 cum 1837.85
Total = 1.93 + 0.02 = 1.97 cum
Rate as per item no 15.7.4 of SH : Dismantling and demolishing
Dismantling cemnet concrete 1:2:4 ( 1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size
For benching : 3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³
=0.043 cum
= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum Net qty== 0.2554 cum
Say 0.26 cum
For fixing cover : 3.14/4 x d2 x thickness 0.7854x1.020x1.020x0.15 m
=0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m : = (-)0.037 cum Net qty= 0.086 cum
Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Rate as per item no 15.2.1 of SH : Dismantling Removal of SFRC cover
Removal of M.S. foot rests
Deduct cost of dismantling manhole 1.68m deep Rate as per Item
No.19.24.4 of SH: DRAINAGE TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of manhole 0.61m depth Cost per metre
depth
Say

19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (R
of manhole to be paid separately) :
19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5

Code Description Unit Quantity Rate Rs. Amount Rs.


15.3 Details of cost for one manhole cum L.S. 0.17 2928.10 497.78
9999 Dismantling of R.C.C slab of 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - cum 7.15 2.12 15.16
5.3 III): 3 aggregate stone 20 mm nominal size) = 1.36x1.26x0.15 = 0.257 sqm L.S. 0.17 10719.30 1822.28
5.9.3 cum 0.45 766.55 344.95
9999 Less cover with frame portion 0.85x0.70x0.15 =(-) 0.089 cum 13.52 2.12 28.66
Net qty=0.168 cum Say 0.17 cum 2708.83
Rate as per item no. 15.3 of SH : Dismantling and demolishing 0.44
Removal of R.C.C cover and frame 2709.26
Removal of R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded 6.22
stone aggregate 20 mm nominal size ) 2715.48
For raised slab = 1.36x1.26x0.15 = 0.257 cum 7.57
Less portion cover with frame = 0.85x0.70x0.15 =(-) 0.089 cum 2723.05
Net qty = 0.168 cum Say 0.17 cum 0.58
Rate as per item no. 5.3 of SH : RCC work Form work = 0.90x0.80 = 2723.63
0.72 sqm 2723.65
Less cover = 0.60x0.45 =(-) 0.27 sqm Net qty = 0.45 sqm
Rate as per item no 5.9.3 of SH : RCC work Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10
Code Description Unit Quantity Rate Rs. Amount Rs.
15.3 Details of cost for one manhole cum L.S. 0.26 2928.10 761.31
9999 Dismantling of R.C.C slab of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 cum 7.15 2.12 15.16
5.3 aggregate stone 20 mm nominal size) 1.66x1.36x0.15 = 0.339 cum sqm L.S. 0.26 10719.30 2787.02
5.9.3 Less for R.C.C cover with frame 3.14/4x(0.80)²x0.15 =(-) 0.075 cum 0.88 766.55 674.56
9999 Net qty 0.264 cum Say 0.26 cum 16.64 2.12 35.28
Rate as per item no. 15.3 of SH : Dismantling and demolishing 4273.32
Removal of R.C.C cover and frame 0.50
R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone 4273.83
aggregate 20 mm nominal size ) 7.16
1.66x1.36x0.15 = 0.339 cum 4280.98
Less portion cover with frame = 3.14/4x0.80x0.80x0.15 =(-) 8.71
0.075 cum 4289.70
Net qty= 0.264 cum Say 0.26 cum 0.67
Rate as per item no 5.3 of SH : RCC Work Form work = 1.2x0.90 = 1.08 4290.37
sqm 4290.35
Less cover = 3.14/4x(0.50)² =(-) 0.196 sqm Net qty= 0.884 sqm Say .88
sqm
Rate as per item no 5.9.3 of SH : RCC work Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20

Code Description Unit Quantity Rate Rs. Amount Rs.


15.3 Details of cost for one manhole cum L.S. 0.24 2928.10 702.74
9999 Dismantling of R.C.C slab of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 cum 7.15 2.12 15.16
5.3 aggregate stone 20 mm nominal size) 1.66x1.36x0.15 = 0.339 cum sqm L.S. 0.24 10719.30 2572.63
5.9.3 Less for R.C.C cover with frame 3.14/4x(0.90)²x0.15 =(-) 0.095 cum 0.83 766.55 636.24
9999 Net qty 0.244 cum Say 0.24 cum 20.28 2.12 42.99
Rate as per item no 15.3 of SH : Dismantling and demolishing 3969.76
Removal of R.C.C cover and frame 0.58
R.C.C work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone 3970.35
aggregate 20 mm nominal size ) 8.25
1.66x1.36x0.15 = 0.339 cum 3978.60
Less portion cover with frame = 3.14/4x0.90x0.90x0.15 =(-) 10.05
0.095 cum 3988.65
Net qty= 0.244 cum Say 0.24 cum 0.77
Rate as per item no 5.3 of SH : RCC Work Form work = 1.2x0.90 = 1.08 3989.42
sqm 3989.40
Less cover = 3.14/4x(0.56)² =(-) 0.246 sqm Net qty= 0.834 sqm Say .83
sqm
Rate as per item no 5.9.3 of SH : RCC work Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35

Code Description Unit Quantity Rate Rs. Amount Rs.


15.3 Details of cost for one manhole cum L.S. 0.02 2928.10 58.56
9999 Dismantling of C.C slab of 1:2:4 (1 cement 2 coarse sand : 4 aggregate cum L.S. 8.06 2.12 17.09
4.2.3 stone 20 mm nominal size) 0.02 9375.20 187.50
9999 = 3.14/4x(0.985)²x0.15 = 0.114 cum 20.28 2.12 42.99
Less cover =3.14/4x(0.90)²x0.15 =(-) 0.095 cum Net qty= 0.019 cum 306.15
Say 0.02 cum 0.60
Rate as per item no. 15.3 of SH : Dismantling and demolishing 306.75
Removal of R.C.C cover and frame 8.53
C.C work 1:2:4 ( 1 cement : 2 coarse sand 4 graded stone aggregate 20 315.27
mm nominal size ) 10.38
3.14/4x(0.985)²x0.15 = 0.114 cum 325.65
Less portion cover with frame = 3.14/4x(0.90)²x0.15 =(-) 0.095 cum 0.80
Net qty= 0.019 cum Say 0.02 cum 326.45
Rate as per item no 4.2.3 of SH : Concrete Work Sundries 326.45
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one no
Say

19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x
cast R.C.C. horizontal grating with frame complete as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.11 Details of cost for one chamber MATERIAL cum 0.18 5660.45 1018.88
6.1.1 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum 0.29 6882.00 1995.78
13.9.1 aggregate 40 mm nominal size) sqm 1.08 386.55 417.47
4.2.3 1.11mx1.06mx0.15 m= 0.176 cum Say 0.18 cum Rate as per item no cum 0.10 9375.20 937.52
5.9.2 4.1.11 of SH : Concrete Work sqm 0.53 669.55 354.86
7380 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 each L.S. 1.00 620.00 620.00
9977 cement : 4 coarse sand) L.S. 7.15 2.12 15.16
9999 2.82 m x 0.23m x0.45 m = 0.29 cum 5.33 2.12 11.30
Rate as per item no 6.1.1 of SH : Brick Work 5370.97
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 6.46
floating coat of neat cement 5377.44
Wall : 1.90x0.45 m = 0.855 sqm Bed : 0.45x0.50 m = 0.225 sqm Total= 91.74
1.080 sqm 5469.17
Rate as per item no 13.9.1 of SH : Finishing 111.70
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone 5580.87
aggregate 20 mm nominal size) 8.56
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum Rate as per item no 4.2.3 5589.44
of SH : Concrete Form work 5589.45
3.50x0.15 m = 0.525 sqm Say 0.53 sqm Rate as per item no 5.9.2 of SH
: RCC
Precast R.C.C. grating with frame 500x450 mm horizontal grating
Carriage of R.C.C. grating Fixing R.C.C. grating TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say

19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precas
vertical grating complete as per standard design :
19.28.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one chamber
Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size)
4.1.11 1.06mx1.06mx0.15 m= 0.17 cum cum 0.17 5660.45 962.28
6.1.1 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.43 6882.00 2959.26
13.9.1 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 sqm 1.55 386.55 599.15
4.2.3 cement : 4 coarse sand) cum 0.001 9375.20 9.38
5.3 2.72 m x 0.23m x0.70 m = 0.438 cum cum day 0.06 10719.30 643.16
0115 Deduct opening 0.45x0.23x0.10 m = 0.01 cum Block 3x(0.075)³ = 0.001 sqm -0.113 645.00 -72.89
5.9.2 cum kg 0.55 669.55 368.25
5.22.1 Total deduction = 0.011 cum each L.S. 4.96 88.95 441.19
7381 Net qty. = 0.438 (-) 0.011 = 0.427 cum 1.00 235.00 235.00
9999 Say 0.43 cum 20.67 2.12 43.82
Rate as per item no 6.1.1 of SH : Brick Work 6188.60
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 2.06
floating coat of neat cement 6190.66
Wall : 1.80x0.70 m = 1.26 sqm Bed : 0.45x0.45 m = 0.202 sqm Top : 29.22
0.45x0.20 m = 0.09 sqm Sides : 2x0.20x0.10 m = 0.04 sqm Total= 1.592 6219.88
sqm 35.58
Deduct opening 0.45x0.10 m = 0.045 sqm 6255.47
Net qty. = 1.592 (-) 0.045 = 1.547 cum 2.73
Say 1.55 cum 6258.20
Rate as per item no 13.9.1 of SH : Finishing 6258.20
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
Block = 3x(0.75)³ = 0.001 cum
Rate as per item no 4.2.3 of SH : Concrete
R.C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size)
0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum Rate as per item no. 5.3
of SH : RCC work
Less labour for not lifting the materilas upto floor five level Coolie
Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm Total= 0.547 sqm Say 0.55
4.1.11 1.06mx1.06mx0.15 m= 0.17 cum cum 0.17 5660.45 962.28
6.1.1 Rate as per item no 4.1.11 of SH : Concrete Work cum 0.43 6882.00 2959.26
13.9.1 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 sqm 1.55 386.55 599.15
4.2.3 cement : 4 coarse sand) cum 0.001 9375.20 9.38
5.3 2.72 m x 0.23m x0.70 m = 0.438 cum cum day 0.06 10719.30 643.16
0115 Deduct opening 0.45x0.23x0.10 m = 0.01 cum Block 3x(0.075)³ = 0.001 sqm -0.113 645.00 -72.89
5.9.2 cum kg 0.55 669.55 368.25
5.22.1 Total deduction = 0.011 cum each L.S. 4.96 88.95 441.19
7381 Net qty. = 0.438 (-) 0.011 = 0.427 cum 1.00 235.00 235.00
9999 Say 0.43 cum 20.67 2.12 43.82
Rate as per item no 6.1.1 of SH : Brick Work 6188.60
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 2.06
floating coat of neat cement 6190.66
Wall : 1.80x0.70 m = 1.26 sqm Bed : 0.45x0.45 m = 0.202 sqm Top : 29.22
0.45x0.20 m = 0.09 sqm Sides : 2x0.20x0.10 m = 0.04 sqm Total= 1.592 6219.88
sqm 35.58
Deduct opening 0.45x0.10 m = 0.045 sqm 6255.47
Net qty. = 1.592 (-) 0.045 = 1.547 cum 2.73
Say 1.55 cum 6258.20
Rate as per item no 13.9.1 of SH : Finishing 6258.20
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
Block = 3x(0.75)³ = 0.001 cum
Rate as per item no 4.2.3 of SH : Concrete
R.C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size)
0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum Rate as per item no. 5.3
of SH : RCC work
Less labour for not lifting the materilas upto floor five level Coolie
Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm Total= 0.547 sqm Say 0.55
sqm
Rate as per item no 5.9.2 of SH : RCC Mild steel reinforcement for
R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
Rate as per item no. 5.22.1 of SH : RCC work
Precast R.C.C. grating with frame 450x100 mm vertical grating
Fixing and carriage of R.C.C. grating TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say

19.29 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 5
precast R.C.C. horizontal grating with frame and vertical
grating complete as per standard design :

19.29.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Code Description Unit Quantity Rate Rs. Amount Rs.
4.1.11 Details of cost for one chamber cum 0.29 5660.45 1641.53
6.1.1 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum 0.54 6882.00 3716.28
13.9.1 aggregate 40 mm nominal size) sqm 2.36 386.55 912.26
4.2.3 1.71mx1.11mx0.15 m = 0.285 cum Say 0.29 cum Rate as per item no cum 0.07 9375.20 656.26
5.3 4.1.11 of SH : Concrete Work cum day 0.06 10719.30 643.16
0115 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 cum -0.113 645.00 -72.89
5.13 cement : 4 coarse sand) sqm 0.04 13581.85 543.27
5.9.2 1.91 m x 0.23m x0.45 m = 0.199 cum 2.20mx0.23mx0.70 m = 0.354 kg 0.91 669.55 609.29
5.22.1 cum Total= 0.553 cum each L.S. 8.00 88.95 711.60
7380 Deduct lintel portion 2x0.23x0.20x0.20 m = (-) 0.018 cum each L.S. 1.00 620.00 620.00
9977 Nte Qty= 0.0535 cum Say 0.54 cum 7.15 2.12 15.16
7381 Rate as per item no 6.1.1 of SH : Brick Work 1.00 235.00 235.00
9999 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 34.06 2.12 72.21
floating coat of neat cement 10303.14
Wall : 1.80x0.70 m = 1.26 sqm Wall : 1.40x0.45 m = 0.63 sqm Bed : 8.69
1.10x0.50 m = 0.55 sqm Total= 2.44 sqm 10311.83
Deduct 2x0.20x0.20 m = (-) 0.08 sqm Net Qty= 2.36 sqm 123.38
Rate as per item no 13.9.1 of SH : Finishing 10435.21
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone 150.23
aggregate 20 mm nominal size) 10585.45
Block = 1.92x0.23x0.15 = 0.07 cum 11.52
Rate as per item no 4.2.3 of SH : Concrete Work 10596.97
R.C.C. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 10596.95
20 mm nominal size)
0.88x0.96x0.075 m = 0.063 cum Say 0.06 cum Rate as per item no. 5.3
of SH : RCC work
Less labour for not lifting the materilas upto floor five level Coolie
R.C.C. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size) in lintels 1x0.96x0.20x0.20 m =
0.04 cum
Rate as per item no. 5.13 of SH : RCC work Form work
Slab bottom 0.50x0.65 m = 0.325 sqm Outer periphery 3.50x0.075 m =
0.263 sqm 2.20x0.15 m = 0.330 sqm
= 0.918 sqm Say 0.91 sqm
Rate as per item no 5.9.2 of SH : RCC Mild steel reinforcement for
R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00 kg Rate as per item no.
5.22.1 of SH : RCC work
Precast R.C.C. grating with frame 500x450 mm horizontal grating
Carriage of R.C.C. grating
Precast R.C.C. grating with frame 450x100 mm vertical grating
Labour for fixing precast R.C.C. grating and frame
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say
19.30 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4
sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23
weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concret
cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse san
smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
19.30.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.11 Details of cost for one chamber cum 0.20 5660.45 1132.09
6.1.1 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum 0.21 6882.00 1445.22
13.9.1 aggregate 40 mm nominal size) sqm 0.90 386.55 347.90
5.3 1.22mx1.065mx0.15 m= 0.195 cum Say 0.20 cum Rate as per item no cum 0.11 10719.30 1179.12
5.9.2 4.1.11 of SH : Concrete Work sqm each 0.56 669.55 374.95
1354 Brick work in bricks of clas designation 7.5 in cement mortar 1:4 ( 1 L.S. 1.00 1400.00 1400.00
9977 cement : 4 coarse sand) L.S. 7.15 2.12 15.16
9999 3.05 m x 0.23m x0.30 m = 0.210 cum Less pipe L.S. 7.15 2.12 15.16
9999 2x3.14/4x(0.10)²x0.23 m = (-) 0.004 cum 13.52 2.12 28.66
Net Qty= 0.206 cum Say 0.21 cum 5938.25
Rate as per item no 6.1.1 of SH : Brick Work 14.59
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 5952.84
floating coat of neat cement 207.04
Wall : 2.13x0.30 m = 0.639 sqm Bed : 0.61x0.455 m = 0.278 sqm 6159.88
Total= 0.917 sqm 252.09
Less pipe 2x3.14/4x(0.10)² = (-) 0.016 sqm Net Qty= 0.901 sqm Say 6411.97
0.90 sqm 19.33
Rate as per item no 13.9.1 of SH : Finishing 6431.30
Cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone 6431.30
aggregate 20 mm nominal size) 3.05x0.23x0.15 = 0.105 cum say 0.11
cum
Rate as per item no 5.3 of SH : RCC Form work
Outer periphery 3.73x0.15 m = 0.56 sqm Rate as per item no 5.9.2 of
SH : RCC
Rectangular cover 455x610 mm with frame (low duty) Carriage of
C.I.cover and frame
Painting of C.I. Cover and frame with coal tar Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say

19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.11 Details of cost of one no. cum 0.22 5660.45 1245.30
6.1.1 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum 0.22 6882.00 1514.04
13.9.1 aggregate 40 mm nominal size) sqm 1.05 386.55 405.88
5.3 1.31mx1.11mx0.15 m= 0.22 cum cum 0.13 10719.30 1393.51
5.9.2 Rate as per item no 4.1.11 of SH : Concrete Work sqm day 0.67 669.55 448.60
0115 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 kg each L.S. -0.24 645.00 -154.80
5.22.1 cement : 4 fine sand) L.S. 6.25 88.95 555.94
1354 3.32 m x 0.23m x0.30 m = 0.229 cum Less pipe L.S. 1.00 1400.00 1400.00
9977 3x3.14x(0.10)²x0.23 m = (-) 0.005 cum 7.15 2.12 15.16
9999 Net Qty= 0.224 cum Say 0.22 cum 7.15 2.12 15.16
9999 Rate as per item no 6.1.1 of SH : Brick Work 13.52 2.12 28.66
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 6867.44
floating coat of neat cement 13.04
Wall : 2.40x0.30 m = 0.72 sqm Bed : 0.70x0.50 m = 0.35 sqm 6880.48
= 1.07 sqm 185.07
Less pipe 3x3.14/4x(0.10)² = (-) 0.02 sqm Net Qty= 1.05 sqm 7065.55
Rate as per item no 13.9.1 of SH : Finishing 225.34
R.C.C 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 7290.89
20 mm nominal size) 17.28
1.16x0.96x0.15 = 0.167 cum 7308.17
Deduct cover 7308.15
0.61x0.45x0.15 m = (-) 0.042 cum
Net Qty= 0.125 cum Say 0.13 cum
Rate as per item no. 5.3 of SH : RCC work Form work
Inside area of chamber : 0.70x0.50 m = 0.35 sqm Outer periphery
4.00x0.15 m = 0.60 sqm = 0.95 sqm Deduct cover : 0.61x0.455 m = (-)
0.278 sqm
= 0.672 sqm Say 0.67 sqm
Rate as per item no 5.9.2 of SH : RCC
Less labour for not lifting the materilas upto floor five level Coolie
M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
Rate as per item no. 5.22.1 of SH : RCC work Rectangular cover
455x610 mm with frame (low duty) Carriage of C.I. Cover and frame
Painting of C.I. Cover and frame with coal tar Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say

19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


4.1.11 Details of cost of one chamber cum 0.26 5660.45 1471.72
6.1.1 Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone cum 0.26 6882.00 1789.32
13.9.1 aggregate 40 mm nominal size) sqm 1.34 386.55 517.98
5.3 1.46mx1.21mx0.15 m= 0.26 cum cum day 0.17 10719.30 1822.28
0115 Rate as per item no 4.1.11 of SH : Concrete Work sqm -0.32 645.00 -206.40
5.9.2 Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1 kg each L.S. 0.91 669.55 609.29
5.22.1 cement : 4 coarse sand) L.S. 8.17 88.95 726.72
1354 3.82 m x 0.23m x0.30 m = 0.26 cum Less pipe L.S. 1.00 1400.00 1400.00
9977 5x3.14x(0.10)²x0.23 m = (-) 0.009 cum 7.15 2.12 15.16
9999 Net Qty= 0.255 cum Say 0.26 cum 7.15 2.12 15.16
9999 Rate as per item no 6.1.1 of SH : Brick Work 13.52 2.12 28.66
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with 8189.89
floating coat of neat cement 12.53
Wall : 2.90x0.30 m = 0.87 sqm Bed : 0.85x0.60 m = 0.51 sqm Total= 8202.41
1.38 sqm 177.75
Less pipe 5x3.14/4x(0.10)² = (-) 0.04 sqm Net Qty= 1.34 sqm 8380.16
Rate as per item no 13.9.1 of SH : Finishing 216.43
R.C.C 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 8596.59
20 mm nominal size) 16.59
1.31x1.06x0.15 = 0.208 cum 8613.18
Deduct cover 8613.20
0.61x0.455x0.15 m = (-) 0.042 cum
Net Qty= 0.166 cum Say 0.17 cum
Rate as per item no. 5.3 of SH : RCC work
Less labour for not lifting the materilas upto floor five level Coolie
Form work
Inside area of chamber : 0.85x0.60 m = 0.511 sqm Outer periphery
4.50x0.15 m = 0.675 sqm
Total= 1.186 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm Net Qty= 0.908 sqm Say
0.91 sqm
Rate as per item no 5.9.2 of SH : RCC M.S.reinforcement for slab for
0.17 cum @ 48.06 kg/cum
= 48.06x0.17cum = 8.17 kg
Rate as per item no. 5.22.1 of SH : RCC work Rectangular cover
455x610 mm with frame (low duty) Carriage of C.I. Cover and frame
Painting of C.I. Cover and frame with coal tar Sundries
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one chamber
Say

19.31 Extra for depth beyond 45 cm of brick masonry chamber :


19.31.1 For 455x610 mm size
19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre
Brick work in bricks of clas designation 7.5 in cement mortar 1:4 ( 1
cement : 4 coarse sand)
3.05 m x 0.23m x1.00 m = 0.70 cum
Rate as per item no 6.1.1 of SH : Brick Work 4817.40
12 mm cement plaster 1:3 (1 cement : 3 coarse sand finished with 6882.0 823.35
6.1.1 cum 0.70
floating coat of neat cement 0 5640.75
13.9.1 sqm 2.13
Wall : 2.13x1.00 m = 2.13 sqm 386.55 5640.75
Rate as per item no 13.9.1 of SH : Finishing TOTAL 5640.75
Cost per metre
Say
19.31.2 For 500x700 mm size
19.31.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre
Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1
cement : 4 fine sand)
3.32 m x 0.23m x1.00 m = 0.76 cum
Rate as per item no 6.1.1 of SH : Brick Work 5230.32
12 mm cement plaster 1:3 (1 cement : 3 coarse sand finished with 927.72
6.1.1 cum 0.76 6882.00
floating coat of neat cement 6158.04
13.9.1 sqm 2.40 386.55
Wall : 2.40x1.00 m = 2.40 sqm 6158.04
Rate as per item no 13.9.1 of SH : Finishing TOTAL 6158.05
Cost per metre
Say

19.31.3 For 600x850 mm size


19.31.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one metre
Brick work in bricks of class designation 7.5 in cement mortar 1:4 ( 1
cement: 4 coarse sand)
3.82 m x 0.23m x1.00 m = 0.88 cum
Rate as per item no 6.1.1 of SH : Brick Work 6056.16
12 mm cement plaster 1:3 (1 cement : 3 coarse sand finished with 1121.00
6.1.1 cum 0.88 6882.00
floating coat of neat cement 7177.16
13.9.1 sqm 2.9 386.55
Wall : 2.90x1.00 m = 2.90 sqm 7177.16
Rate as per item no 13.9.1 of SH : Finishing TOTAL 7177.15
Cost per metre
Say

19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam
long complete as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code Description Unit Quantity Rate Rs. Amount Rs.


2.8.1 Details of cost for one soak pit cum cum 14.73 286.85 4225.30
2.26.1 Earth work in excavation including disposal of surplus earth 1000 Nos 7.37 104.50 770.17
2602 3.14/4x(2.5)²x3m = 14.73 cum cum 0.145 4590.00 665.55
0362 Rate as per item no. 2.8.1 of SH: Earth work Rate as per item no. 2.26.1 cum 2.74 450.00 1233.00
0285 of SH : Earth work cum each 4.13 650.00 2684.50
0287 = 3.14/4x(2.5)² x 1.5 m = 7.37 cum cum 1000 6.91 650.00 4491.50
1854 2nd class bricks Nos L.S. 3.00 70.00 210.00
2260 perimetre = 4x0.35 =1.40 m Area = 1.40x2.925 m = 4.1 sqm cum kg 13.78 178.19 2455.46
2201 Number of brick = 4.1x487x0.066 = 131.78 Wastage 10% = 13.718 metre 0.145 437.15 63.39
9999 Total= 144.96 Say 145 numbers day day day 112.14 2.12 237.74
5.12 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 day 0.02 9673.50 193.47
5.22.1 Brick bats = 3.14/4x(1.2)²x2.925m =3.33 cum Deduct = 0.45x0.45x2.925 1.60 88.95 142.32
16.8.1 m = 0.59 cum 8.17 49.90 407.68
0123 Net qty= 2.74 cum Brick bats 0.50 784.00 392.00
0124 Brick aggregate 50 to 80 mm nominal size = 3.14x1.50x0.03x2.925 m = 0.50 714.00 357.00
0114 4.13 cum 3.00 645.00 1935.00
0115 Brick Aggregate (Single size) : 63 mm nominal size Brick aggregate 40 3.00 645.00 1935.00
mm nominal size 22399.07
= 3.14x2.15x0.35x2.925 m =6.91 cum 166.60
Brick Aggregate (Single size) : 40 mm nominal size Stoneware pipes 22565.67
grade A (60 cm long) 100 mm dia Carriage of brick bats and aggregate 2364.16
Carriage of Brick aggregate Carriage of Bricks 24929.83
Single matting 2.5x2.5 m = 6.25 sqm Precast R.C.C.slabs 7.5 cm thick 2878.63
in 27808.46
cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone 220.70
aggregate 20 mm nominal size) 28029.16
0.45x0.45x0.075 m = 0.02 cum 28029.15
Rate as per item no 5.12 of SH : RCC Reinforcement @ 80 kg/cum =
0.02x80 =1.6 kg Rate as per item no. 5.22.1 of SH : RCC work
2nd class brick edging laid length wise with half brick depth 3.14x2.6 m
=8.17 m
Rate as per item no. 16.8.1 of SH : Road work LABOUR
Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar
Coolie TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of one soak pit
Say

19.33 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter
and 1.20 m long complete as per standard design.

Code Description Unit Quantity Rate Rs. Amount Rs.


2.8.1 Details of cost for one soak pit cum cum 1.73 286.85 496.25
0362 Earth work in excavation including disposal of surplus earth cum metre 1.73 450.00 778.50
2260 1.2x1.2x1.2m = 1.73 cum each L.S. 1.73 178.19 308.27
16.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) Brick bats day L.S. 5.20 49.90 259.48
1854 1.2x1.2x1.2 = 1.73 cum 2.00 70.00 140.00
9999 Carriage of Brick aggregate 25.84 2.12 54.78
0114 Rate as per item no. 16.8.1 of SH : Road work 0.50 645.00 322.50
9999 Second class brick edging laid length wise with half brick depth 13.52 2.12 28.66
Stoneware pipes grade A (60 cm long) 100 mm dia Sundries 2388.44
LABOUR 16.33
For filling brick bats Beldar 2404.77
Sundries TOTAL 231.69
Add 1 % Water charges on "W-A" TOTAL 2636.46
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 282.11
Add 15% CPOH on "Y-A" TOTAL 2918.57
Add Cess @ 1% on "Z-A" Cost of one soak pit 21.63
Say 2940.20
2940.20

19.34 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing
complete :
19.34.1 100 mm dia

Code Description Unit Quantity Rate Rs. Amount Rs.


7128 Details of cost of one no. MATERIAL each L.S. 1.00 185.00 185.00
9977 S.W. intercepting trap 100 mm dia Carriage of trap tonne tonne 1.04 2.12 2.20
0367 Portland Cement (OPC-43 grade) Carriage of Cement cum 0.0013 5000.00 6.50
2209 Fine sand (zone IV) cum 0.0013 145.72 0.19
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) kilogram 0.001 900.00 0.90
2261 Spun yarn LABOUR day day 0.001 163.93 0.16
1881 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day day 0.09 55.00 4.95
0123 Bhisti TOTAL 0.02 784.00 15.68
0124 Add 1 % Water charges on "W" TOTAL 0.02 714.00 14.28
0114 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.06 645.00 38.70
0101 Add 15% CPOH on "Y" TOTAL 0.02 714.00 14.28
Add Cess @ 1% on "Z" Cost of one no. 282.85
Say 2.83
285.68
40.14
325.81
48.87
374.69
3.75
378.43
378.45

19.34.2 150 mm dia


Code Description Unit Quantity Rate Rs. Amount Rs.
7129 Details of cost of one no. each L.S. 1.00 240.00 240.00
9977 MATERIAL tonne tonne 2.08 2.12 4.41
0367 S.W. intercepting trap 150 mm dia Carriage of trap cum 0.0019 5000.00 9.50
2209 Portland Cement (OPC-43 grade) Carriage of Cement cum 0.0019 145.72 0.28
0983 Fine sand (zone IV) kilogram 0.0014 900.00 1.26
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day 0.0014 163.93 0.23
1881 Spun yarn LABOUR day day 0.18 55.00 9.90
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.03 784.00 23.52
0124 Bhisti TOTAL 0.03 714.00 21.42
0114 Add 1 % Water charges on "W" TOTAL 0.08 645.00 51.60
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.03 714.00 21.42
Add 15% CPOH on "Y" TOTAL 383.54
Add Cess @ 1% on "Z" Cost of one no. 3.84
Say 387.37
54.43
441.80
66.27
508.07
5.08
513.15
513.15

19.35 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement m
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
19.35.1 450 mm dia RCC pipes.

Code Description Unit Quantity Rate Rs. Amount Rs.


1728 Detail for 10 metre MATERIALS : metre 100 10.00 1500.00 15000.00
2299 RCC pipe 450 mm dia NP-3 spigot Carriage of R.C.C. pipes 450 & 500 metre 0.10 3981.36 398.14
0367 mm dia Portland Cement (OPC-43 grade) tonne tonne 0.012 5000.00 60.00
2209 Carriage of Cement Fine sand (zone IV) cum 0.012 145.72 1.75
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.017 900.00 15.30
2261 LABOUR day day day 0.017 163.93 2.79
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day 0.375 784.00 294.00
0124 Bhisti TOTAL 0.375 714.00 267.75
0114 Add 1 % Water charges on "W" TOTAL 2.41 645.00 1554.45
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.33 714.00 235.62
Add 15% CPOH on "Y" TOTAL 17829.79
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 178.30
Say 18008.09
2530.14
20538.23
3080.73
23618.96
236.19
23855.15
2385.51

2385.50
19.35.2 600 mm dia RCC pipes.

Code Description Unit Quantity Rate Rs. Amount Rs.


1729 Detail for 10 metre MATERIALS : metre 100 10.00 2000.00 20000.00
2303 RCC pipe 600 mm dia NP-3 spigot metre 0.10 5972.04 597.20
0367 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia Portland Cement tonne tonne 0.016 5000.00 80.00
2209 (OPC-43 grade) cum 0.016 145.72 2.33
0983 Carriage of Cement Fine sand (zone IV) cum 0.022 900.00 19.80
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.022 163.93 3.61
0123 LABOUR day 0.46 784.00 360.64
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.46 714.00 328.44
0114 Bhisti TOTAL 1.83 645.00 1180.35
0101 Add 1 % Water charges on "W" TOTAL 0.33 714.00 235.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 22807.99
Add 15% CPOH on "Y" TOTAL 228.08
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 23036.07
Say 3236.57
26272.64
3940.90
30213.54
302.14
30515.67
3051.57
3051.55

19.35.3 900 mm dia RCC pipes.


Code Description Unit Quantity Rate Rs. Amount Rs.
1730 Detail for 10 metre MATERIALS : metre 100 10.00 3175.00 31750.00
2331 RCC pipe 900 mm dia NP-3 spigot Carriage of R.C.C. pipes 900 mm dia metre 0.10 8958.06 895.81
0367 Portland Cement (OPC-43 grade) Carriage of Cement tonne tonne 0.025 5000.00 125.00
2209 Fine sand (zone IV) cum 0.025 145.72 3.64
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.033 900.00 29.70
2261 LABOUR day day day 0.033 163.93 5.41
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day 0.625 784.00 490.00
0124 Bhisti TOTAL 0.625 714.00 446.25
0114 Add 1 % Water charges on "W" TOTAL 3.00 645.00 1935.00
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.50 714.00 357.00
Add 15% CPOH on "Y" TOTAL 36037.81
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 360.38
Say 36398.19
5113.95
41512.13
6226.82
47738.95
477.39
48216.34
4821.63
4821.65

19.35.4 1000 mm dia RCC pipes. (Laying by manual/ machanical means)

Code Description Unit Quantity Rate Rs. Amount Rs.


1731 Detail for 10 metre MATERIALS : metre 100 10.00 3915.00 39150.00
2332 RCC pipe 1000 mm dia NP-3 spigot Carriage of R.C.C. pipes 1000 mm metre 0.10 11944.08 1194.41
0367 dia Portland Cement (OPC-43 grade) Carriage of Cement tonne tonne 0.028 5000.00 140.00
2209 Fine sand (zone IV) cum 0.028 145.72 4.08
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.037 900.00 33.30
2261 LABOUR day day day 0.037 163.93 6.07
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day 0.68 784.00 533.12
0124 Bhisti TOTAL 0.68 714.00 485.52
0114 Add 1 % Water charges on "W" TOTAL 4.33 645.00 2792.85
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.50 714.00 357.00
Add 15% CPOH on "Y" TOTAL 44696.34
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 446.96
Say 45143.31
6342.63
51485.94
7722.89
59208.83
592.09
59800.92
5980.09
5980.10

19.35.5 1200 mm dia RCC pipes. (Laying by manual/ machanical means)


Code Description Unit Quantity Rate Rs. Amount Rs.
1732 Detail for 10 metre metre 100 10.0 5200.00 52000.00
2334 MATERIALS : metre 0.10 11944.08 1194.41
0367 RCC pipe 1200 mm dia NP-3 spigot Carriage of R.C.C. pipes 1200 mm tonne tonne 0.034 5000.00 170.00
2209 dia Portland Cement (OPC-43 grade) Carriage of Cement cum 0.034 145.72 4.95
0983 Fine sand (zone IV) cum 0.046 900.00 41.40
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.046 163.93 7.54
0123 LABOUR day 0.795 784.00 623.28
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.795 714.00 567.63
0114 Bhisti TOTAL 8.67 645.00 5592.15
0101 Add 1 % Water charges on "W" TOTAL 0.67 714.00 478.38
Add GST on "X" (multiplying factor 0.1405) TOTAL 60679.74
Add 15% CPOH on "Y" TOTAL 606.80
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 61286.54
Say 8610.76
69897.30
10484.59
80381.89
803.82
81185.71
8118.57
8118.55

19.35.6 1800 mm dia RCC pipes. (Laying by manual/ machenical means)


Code Description Unit Quantity Rate Rs. Amount Rs.
1733 Detail for 10 metre metre 100 10.00 9450.00 94500.00
2336 MATERIALS : metre 0.10 11944.08 1194.41
0367 RCC pipe 1800 mm dia NP-3 spigot tonne tonne 0.049 5000.00 245.00
2209 Carriage of RCC pipe above 1200 mm dia and upto 1800 mm dia cum 0.049 145.72 7.14
0983 Portland Cement (OPC-43 grade) Carriage of Cement cum 0.055 900.00 49.50
2261 Fine sand (zone IV) day day day 0.055 163.93 9.02
0123 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day 1.15 784.00 901.60
0124 LABOUR 1.15 714.00 821.10
0114 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 13.00 645.00 8385.00
0101 Bhisti TOTAL 1.00 714.00 714.00
Add 1 % Water charges on "W" TOTAL 106826.76
Add GST on "X" (multiplying factor 0.1405) TOTAL 1068.27
Add 15% CPOH on "Y" TOTAL 107895.03
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 15159.25
Say 123054.28
18458.14
141512.43
1415.12
142927.55
14292.76
14292.75

19.36 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mo
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
19.36.1 450 mm dia RCC pipes.

Code Description Unit Quantity Rate Rs. Amount Rs.


1734 Detail for 10 metre metre 100 10.0 1750.00 17500.00
2299 MATERIALS : metre 0.10 3981.36 398.14
0367 RCC pipe 450 mm dia NP-4 spigot Carriage of R.C.C. pipes 450 & 500 tonne tonne 0.012 5000.00 60.00
2209 mm dia Portland Cement (OPC-43 grade) cum 0.012 145.72 1.75
0983 Carriage of Cement Fine sand (zone IV) cum 0.017 900.00 15.30
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.017 163.93 2.79
0123 LABOUR day 0.375 784.00 294.00
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.375 714.00 267.75
0114 Bhisti TOTAL 2.41 645.00 1554.45
0101 Add 1 % Water charges on "W" TOTAL 0.33 714.00 235.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 20329.79
Add 15% CPOH on "Y" TOTAL 203.30
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 20533.09
Say 2884.90
23417.99
3512.70
26930.69
269.31
27199.99
2720.00
2720.00

19.36.2 600 mm dia RCC pipes.

Code Description Unit Quantity Rate Rs. Amount Rs.


1735 Detail for 10 metre MATERIALS : metre 100 10.0 2350.00 23500.00
2303 RCC pipe 600 mm dia pipe NP-4 spigot metre 0.10 5972.04 597.20
0367 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia Portland Cement tonne tonne 0.016 5000.00 80.00
2209 (OPC-43 grade) cum 0.016 145.72 2.33
0983 Carriage of Cement Fine sand (zone IV) cum 0.022 900.00 19.80
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.022 163.93 3.61
0123 LABOUR day 0.46 784.00 360.64
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.46 714.00 328.44
0114 Bhisti TOTAL 1.83 645.00 1180.35
0101 Add 1 % Water charges on "W" TOTAL 0.33 714.00 235.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 26307.99
Add 15% CPOH on "Y" TOTAL 263.08
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 26571.07
Say 3733.24
30304.31
4545.65
34849.95
348.50
35198.45
3519.85
3519.85

19.36.3 900 mm dia RCC pipes.

Code Description Unit Quantity Rate Rs. Amount Rs.


1736 Detail for 10 metre MATERIALS : metre 100 10.0 4500.00 45000.00
2331 RCC pipe 900 mm dia pipe NP-4 spigot metre 0.10 8958.06 895.81
0367 R.C.C. pipes 900 mm dia Portland Cement (OPC-43 grade) Carriage of tonne tonne 0.025 5000.00 125.00
2209 Cement cum 0.025 145.72 3.64
0983 Fine sand (zone IV) cum 0.033 900.00 29.70
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.033 163.93 5.41
0123 LABOUR day 0.625 784.00 490.00
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 0.625 714.00 446.25
0114 Bhisti TOTAL 3.00 645.00 1935.00
0101 Add 1 % Water charges on "W" TOTAL 0.5 714.00 357.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 49287.81
Add 15% CPOH on "Y" TOTAL 492.88
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 49780.69
Say 6994.19
56774.87
8516.23
65291.10
652.91
65944.02
6594.40
6594.40

19.36.4 1000 mm dia RCC pipes. (Laying by manual/ machanical means)

Code Description Unit Quantity Rate Rs. Amount Rs.


1737 Detail for 10 metre MATERIALS : metre 100 10.0 5570.00 55700.00
2332 RCC pipe 1000 mm dia pipe NP-4 spigot Carriage of R.C.C. pipes 1000 metre 0.10 11944.08 1194.41
0367 mm dia Portland Cement (OPC-43 grade) Carriage of Cement tonne tonne 0.028 5000.00 140.00
2209 Fine sand (zone IV) cum 0.028 145.72 4.08
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.037 900.00 33.30
2261 LABOUR day day day 0.037 163.93 6.07
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day 0.68 784.00 533.12
0124 Bhisti TOTAL 0.68 714.00 485.52
0114 Add 1 % Water charges on "W" TOTAL 4.33 645.00 2792.85
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.5 714.00 357.00
Add 15% CPOH on "Y" TOTAL 61246.34
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 612.46
Say 61858.81
8691.16
70549.97
10582.50
81132.46
811.32
81943.79
8194.38
8194.40

19.36.5 1200 mm dia RCC pipes. (Laying by manual/ machanical means)

Code Description Unit Quantity Rate Rs. Amount Rs.


1738 Detail for 10 metre MATERIALS : metre 100 10.0 6510.00 65100.00
2334 RCC pipe 1200 mm dia pipe NP-4 spigot Carriage of R.C.C. pipes 1200 metre 0.10 11944.08 1194.41
0367 mm dia Portland Cement (OPC-43 grade) Carriage of Cement tonne tonne 0.034 5000.00 170.00
2209 Fine sand (zone IV) cum 0.034 145.72 4.95
0983 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.046 900.00 41.40
2261 LABOUR day day day 0.046 163.93 7.54
0123 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar day 0.795 784.00 623.28
0124 Bhisti TOTAL 0.795 714.00 567.63
0114 Add 1 % Water charges on "W" TOTAL 8.67 645.00 5592.15
0101 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.67 714.00 478.38
Add 15% CPOH on "Y" TOTAL 73779.74
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 737.80
Say 74517.54
10469.71
84987.26
12748.09
97735.34
977.35
98712.70
9871.27
9871.25

19.36.6 1800 mm dia RCC pipes. (Laying by manual/ machanical means)

Code Description Unit Quantity Rate Rs. Amount Rs.


1739 Detail for 10 metre MATERIALS : metre 100 10.0 13650.00 136500.00
2336 RCC pipe 1800 mm dia pipe NP-4 spigot RCC pipe above 1200 mm dia metre 0.10 11944.08 1194.41
0367 and upto 1800 mm dia tonne tonne 0.049 5000.00 245.00
2209 Portland Cement (OPC-43 grade) Carriage of Cement cum 0.049 145.72 7.14
0983 Fine sand (zone IV) cum 0.055 900.00 49.50
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) day day day 0.055 163.93 9.02
0123 LABOUR day 1.15 784.00 901.60
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 1.15 714.00 821.10
0114 Bhisti TOTAL 13.00 645.00 8385.00
0101 Add 1 % Water charges on "W" TOTAL 1.00 714.00 714.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 148826.76
Add 15% CPOH on "Y" TOTAL 1488.27
Add Cess @ 1% on "Z" Detail of cost for 10 metre Rate per metre 150315.03
Say 21119.26
171434.29
25715.14
197149.44
1971.49
199120.93
19912.09
19912.10

SUB HEAD : 20.0


PILE WORK
1383
SUB HEAD : 20.0
PILE WORK
1383

20.1 Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced
cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding
steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment
measured from top of shoe to the bottom of pile cap) :
20.1.1 400 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x0.40²x20 = 2.51 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 2.51 7997.30 20073.22
9999 Sundries L.S. 175.00 2.12 371.00
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.36 35000.00 12600.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 39951.94
Add 1 % Water charges on "W-A" 198.79
TOTAL 40150.73
Add GST on "X-A" (multiplying factor 0.1405) 2820.89
TOTAL 42971.62
Add 15% CPOH on "Y-A" 3434.76
TOTAL 46406.38
Add Cess @ 1% on "Z-A" 263.33
Cost of 20 metre pile 46669.71
Cost of 1 metre pile 2333.49
Say 2333.50
20.1.2 450 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x0.45²x20 = 3.18 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.18 7997.30 25431.41
9999 Sundries L.S. 225.00 2.12 477.00
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.48 35000.00 16800.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 49616.13
Add 1 % Water charges on "W-A" 241.85
TOTAL 49857.98
Add GST on "X-A" (multiplying factor 0.1405) 3431.93
TOTAL 53289.91
Add 15% CPOH on "Y-A" 4178.77
TOTAL 57468.69
Add Cess @ 1% on "Z-A" 320.37
Cost of 20 metre pile 57789.06
Cost of 1 metre pile 2889.45
Say 2889.45
20.1.3 500 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.925 7997.30 31389.40
9999 Sundries L.S. 275.00 2.12 583.00
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.60 35000.00 21000.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 59880.12
Add 1 % Water charges on "W-A" 284.91
TOTAL 60165.03
Add GST on "X-A" (multiplying factor 0.1405) 4042.98
TOTAL 64208.01
Add 15% CPOH on "Y-A" 4922.79
TOTAL 69130.80
Add Cess @ 1% on "Z-A" 377.41
Cost of 20 metre pile 69508.21
Cost of 1 metre pile 3475.41
Say 3475.40

20.1.4 550 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.55²x20 = 4.75 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 4.75 7997.30 37987.18
9999 Sundries L.S. 330.00 2.12 699.60
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.60 35000.00 21000.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 66594.50
Add 1 % Water charges on "W-A" 286.07
TOTAL 66880.57
Add GST on "X-A" (multiplying factor 0.1405) 4059.52
TOTAL 70940.09
Add 15% CPOH on "Y-A" 4942.94
TOTAL 75883.03
Add Cess @ 1% on "Z-A" 378.96
Cost of 20 metre pile 76261.99
Cost of 1 metre pile 3813.10
Say 3813.10
20.1.5 750 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 15 m length of pile
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 6.62 7997.30 52942.13
9999 Sundries L.S. 460.00 2.12 975.20
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.70 35000.00 24500.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.14 784.00 109.76
0114 Beldar day 3.50 645.00 2257.50
TOTAL 86339.59
Add 1 % Water charges on "W-A" 333.97
TOTAL 86673.56
Add GST on "X-A" (multiplying factor 0.1405) 4739.27
TOTAL 91412.83
Add 15% CPOH on "Y-A" 5770.61
TOTAL 97183.43
Add Cess @ 1% on "Z-A" 442.41
Cost of 15 metre pile 97625.85
Cost of 1 metre pile 6508.39
Say 6508.40

20.1.6 1000 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 m length of pile
MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 7.85 7997.30 62778.81
9999 Sundries L.S. 550.00 2.12 1166.00
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.68 35000.00 23800.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.16 784.00 125.44
0114 Beldar day 4.00 645.00 2580.00
TOTAL 96005.25
Add 1 % Water charges on "W-A" 332.26
TOTAL 96337.51
Add GST on "X-A" (multiplying factor 0.1405) 4715.00
TOTAL 101052.51
Add 15% CPOH on "Y-A" 5741.06
TOTAL 106793.56
Add Cess @ 1% on "Z-A" 440.15
Cost of 10 metre pile 107233.71
Cost of 1 metre pile 10723.37
Say 10723.35
20.1.7 1200 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 9 m length of pile
MATERIAL
Concrete 3.14/4x1.2²x9 = 10.17 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 10.17 7997.30 81332.54
9999 Sundries L.S. 710.00 2.12 1505.20
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.67 35000.00 23450.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
LABOUR
Work supervisor
0130 Mistry day 0.18 784.00 141.12
0114 Beldar day 4.50 645.00 2902.50
TOTAL 114886.36
Add 1 % Water charges on "W-A" 335.54
TOTAL 115221.90
Add GST on "X-A" (multiplying factor 0.1405) 4761.45
TOTAL 119983.35
Add 15% CPOH on "Y-A" 5797.62
TOTAL 125780.98
Add Cess @ 1% on "Z-A" 444.48
Cost of 9 metre pile 126225.46
Cost of 1 metre pile 14025.05
Say 14025.05

20.1.8 1500 mm dia piles


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 9 m length of pile
MATERIAL
Concrete 3.14/4x1.5²x9 = 15.90 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 15.90 7997.30 127157.07
9999 Sundries L.S. 1115.00 2.12 2363.80
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.77 35000.00 26950.00
0025 Hire and running charges of light crane. day 0.10 3500.00 350.00
LABOUR
Work supervisor
0130 Mistry day 0.20 784.00 156.80
0114 Beldar day 5.00 645.00 3225.00
TOTAL 165547.67
Add 1 % Water charges on "W-A" 383.91
TOTAL 165931.58
Add GST on "X-A" (multiplying factor 0.1405) 5447.82
TOTAL 171379.39
Add 15% CPOH on "Y-A" 6633.35
TOTAL 178012.74
Add Cess @ 1% on "Z-A" 508.56
Cost of 9 metre pile 178521.30
Cost of 1 metre pile 19835.70
Say 19835.70
20.2 Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length be
cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite sol
temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussi
using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excav
with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used .
20.2.1 450 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.45²x20 = 3.18 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.18 7997.30 25431.41
7183 Bentonite tonne 0.25 2800.00 700.00
9999 Sundries L.S. 65.00 2.12 137.80
MACHINERY
0015 Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories day 0.94 3000.00 2820.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.38 3000.00 1140.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 2.50 645.00 1612.50
TOTAL 35070.79
Add 1 % Water charges on "W-A" 96.39
TOTAL 35167.19
Add GST on "X-A" (multiplying factor 0.1405) 1367.88
TOTAL 36535.06
Add 15% CPOH on "Y-A" 1665.55
TOTAL 38200.61
Add Cess @ 1% on "Z-A" 127.69
Cost of 20 metre pile 38328.30
Cost of 1 metre pile 1916.42
Say 1916.40

20.2.2 500 mm dia piles


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.925 7997.30 31389.40
7183 Bentonite tonne 0.28 2800.00 784.00
9999 Sundries L.S. 80.00 2.12 169.60
MACHINERY
0015 Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories day 1.20 3000.00 3600.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.38 3000.00 1140.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 2.50 645.00 1612.50
TOTAL 41924.58
Add 1 % Water charges on "W-A" 105.35
TOTAL 42029.93
Add GST on "X-A" (multiplying factor 0.1405) 1494.99
TOTAL 43524.93
Add 15% CPOH on "Y-A" 1820.33
TOTAL 45345.26
Add Cess @ 1% on "Z-A" 139.56
Cost of 20 metre pile 45484.82
Cost of 1 metre pile 2274.24
Say 2274.25
20.2.3 600 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 5.65 7997.30 45184.75
7183 Bentonite tonne 0.33 2800.00 924.00
9999 Sundries L.S. 115.00 2.12 243.80
MACHINERY
0015 Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories day 1.50 3000.00 4500.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.38 3000.00 1140.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 57156.63
Add 1 % Water charges on "W-A" 119.72
TOTAL 57276.34
Add GST on "X-A" (multiplying factor 0.1405) 1698.87
TOTAL 58975.21
Add 15% CPOH on "Y-A" 2068.57
TOTAL 61043.78
Add Cess @ 1% on "Z-A" 158.59
Cost of 20 metre pile 61202.37
Cost of 1 metre pile 3060.12
Say 3060.10

20.2.4 750 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 15 m length of pile
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 6.62 7997.30 52942.13
7183 Bentonite tonne 0.30 2800.00 840.00
9999 Sundries L.S. 130.00 2.12 275.60
MACHINERY
0015 Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories day 1.40 3000.00 4200.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.75 3000.00 2250.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
LABOUR
Work supervisor
0130 Mistry day 0.14 784.00 109.76
0114 Beldar day 3.50 645.00 2257.50
TOTAL 66009.99
Add 1 % Water charges on "W-A" 130.68
TOTAL 66140.66
Add GST on "X-A" (multiplying factor 0.1405) 1854.39
TOTAL 67995.06
Add 15% CPOH on "Y-A" 2257.94
TOTAL 70253.00
Add Cess @ 1% on "Z-A" 173.11
Cost of 15 metre pile 70426.11
Cost of 1 metre pile 4695.07
Say 4695.05
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of garde M-25 of specified diameter and length be
to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bento
20.2A solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in th
20.2A.1 etc. by Crawler mounted, telescopic boom hydraulic pilling Rig all complete, including removal of excavated earth with all its lifts and le
of pile for payment shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tube well boring machine shall not be used.
600 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 5.65 7997.30 45184.75
7183 Bentonite tonne 0.33 2800.00 924.00
9999 Sundries L.S. 110.00 2.12 233.20
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.75 35000.00 26250.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.38 3000.00 1140.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 78896.03
Add 1 % Water charges on "W-A" 337.11
TOTAL 79233.14
Add GST on "X-A" (multiplying factor 0.1405) 4783.80
TOTAL 84016.94
Add 15% CPOH on "Y-A" 5824.83
TOTAL 89841.77
Add Cess @ 1% on "Z-A" 446.57
Cost of 20 metre pile 90288.34
Cost of 1 metre pile 4514.42
Say 4514.40

20.2A.2 750 mm dia piles


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 15 m length of pile
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 6.62 7997.30 52942.13
7183 Bentonite tonne 0.30 2800.00 840.00
9999 Sundries L.S. 130.00 2.12 275.60
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.70 35000.00 24500.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.75 3000.00 2250.00
0018 Hire and running charges of loader day 0.30 6000.00 1800.00
0017 Hire and running charges of tipper day 0.30 3750.00 1125.00
LABOUR
Work supervisor
0130 Mistry day 0.14 784.00 109.76
0114 Beldar day 3.50 645.00 2257.50
TOTAL 86309.99
Add 1 % Water charges on "W-A" 333.68
TOTAL 86643.66
Add GST on "X-A" (multiplying factor 0.1405) 4735.07
TOTAL 91378.73
Add 15% CPOH on "Y-A" 5765.49
TOTAL 97144.22
Add Cess @ 1% on "Z-A" 442.02
Cost of 15 metre pile 97586.24
Cost of 1 metre pile 6505.75
Say 6505.75
20.2A.3 1000 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 m length of pile
MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 7.85 7997.30 62778.81
7183 Bentonite tonne 0.35 2800.00 980.00
9999 Sundries L.S. 155.00 2.12 328.60
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.69 35000.00 24150.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.75 3000.00 2250.00
0018 Hire and running charges of loader day 0.40 6000.00 2400.00
0017 Hire and running charges of tipper day 0.40 3750.00 1500.00
LABOUR
Work supervisor
0130 Mistry day 0.16 784.00 125.44
0114 Beldar day 4.00 645.00 2580.00
TOTAL 97302.85
Add 1 % Water charges on "W-A" 345.24
TOTAL 97648.09
Add GST on "X-A" (multiplying factor 0.1405) 4899.13
TOTAL 102547.22
Add 15% CPOH on "Y-A" 5965.26
TOTAL 108512.48
Add Cess @ 1% on "Z-A" 457.34
Cost of 10 metre pile 108969.82
Cost of 1 metre pile 10896.98
Say 10897.00

20.2A.4 1200 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 9 m length of pile
MATERIAL
Concrete 3.14/4x1.20²x9 = 10.17 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 10.17 7997.30 81332.54
7183 Bentonite tonne 0.385 2800.00 1078.00
9999 Sundries L.S. 200.00 2.12 424.00
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.67 35000.00 23450.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.75 3000.00 2250.00
0018 Hire and running charges of loader. day 0.50 6000.00 3000.00
0017 Hire and running charges of tipper day 0.50 3750.00 1875.00
LABOUR
Work supervisor
0130 Mistry day 0.18 784.00 141.12
0114 Beldar day 4.50 645.00 2902.50
TOTAL 116663.16
Add 1 % Water charges on "W-A" 353.31
TOTAL 117016.47
Add GST on "X-A" (multiplying factor 0.1405) 5013.59
TOTAL 122030.06
Add 15% CPOH on "Y-A" 6104.63
TOTAL 128134.69
Add Cess @ 1% on "Z-A" 468.02
Cost of 9 metre pile 128602.71
Cost of 1 metre pile 14289.19
Say 14289.20
20.2A.5 1500 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 9 m length of pile
MATERIAL
Concrete 3.14/4x1.50²x9 = 15.90 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 15.90 7997.30 127157.07
7183 Bentonite tonne 0.45 2800.00 1260.00
9999 Sundries L.S. 315.00 2.12 667.80
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.77 35000.00 26950.00
0025 Hire and running charges of light crane. day 0.10 3500.00 350.00
0026 Hire and running charges of bentonite pump. day 0.96 3000.00 2880.00
0018 Hire and running charges of loader day 0.75 6000.00 4500.00
0017 Hire and running charges of tipper day 0.75 3750.00 2812.50
LABOUR
Work supervisor
0130 Mistry day 0.25 784.00 196.00
0114 Beldar day 5.00 645.00 3225.00
TOTAL 169998.37
Add 1 % Water charges on "W-A" 428.41
TOTAL 170426.78
Add GST on "X-A" (multiplying factor 0.1405) 6079.39
TOTAL 176506.18
Add 15% CPOH on "Y-A" 7402.37
TOTAL 183908.54
Add Cess @ 1% on "Z-A" 567.51
Cost of 9 metre pile 184476.06
Cost of 1 metre pile 20497.34
Say 20497.35
20.3 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter a
below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including
boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured u
bottom of pile cap) :
20.3.1 300 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 metres
MATERIAL
R.C.C
Stem -3.14/4x(0.30)²x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)²x0.075 = 0.033 cum
2x 3.14/4x(0.525)²x0.150 = 0.065 cum
=0.778 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 0.778 7997.30 6221.90
7183 Bentonite tonne 0.08 2800.00 224.00
9999 Sundries L.S. 70.00 2.12 148.40
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.36 35000.00 12600.00
0025 Hire and running charges of light crane. day 0.03 3500.00 105.00
0026 Hire and running charges of bentonite pump. day 0.02 3000.00 60.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 20712.02
Add 1 % Water charges on "W-A" 144.90
TOTAL 20856.92
Add GST on "X-A" (multiplying factor 0.1405) 2056.22
TOTAL 22913.14
Add 15% CPOH on "Y-A" 2503.69
TOTAL 25416.83
Add Cess @ 1% on "Z-A" 191.95
Cost of 10 metre pile 25608.78
Cost of 1 metre pile 2560.88
Say 2560.90
20.3.2 400 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metres
MATERIAL
R.C.C
Stem -3.14/4x(0.40)²x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)²x0.1 = 0.079 cum
2x 3.14/4x(0.7)²x0.30 = 0.23 cum
= 1.478 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 1.478 7997.30 11820.01
7183 Bentonite tonne 0.15 2800.00 420.00
9999 Sundries L.S. 130.00 2.12 275.60
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.36 35000.00 12600.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.02 3000.00 60.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 26738.33
Add 1 % Water charges on "W-A" 149.18
TOTAL 26887.51
Add GST on "X-A" (multiplying factor 0.1405) 2116.98
TOTAL 29004.50
Add 15% CPOH on "Y-A" 2577.67
TOTAL 31582.17
Add Cess @ 1% on "Z-A" 197.62
Cost of 10 metre pile 31779.79
Cost of 1 metre pile 3177.98
Say 3178.00

20.3.3 450 mm dia piles


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metres
MATERIAL
R.C.C
Stem -3.14/4x(0.45)²x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)²x0.113 = 0.112 cum
2x 3.14/4x(0.788)²x0.337 = 0.329 cum
= 1.906 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 1.906 7997.30 15242.85
7183 Bentonite tonne 0.19 2800.00 532.00
9999 Sundries L.S. 165.00 2.12 349.80
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.36 35000.00 12600.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.02 3000.00 60.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 30347.37
Add 1 % Water charges on "W-A" 151.05
TOTAL 30498.42
Add GST on "X-A" (multiplying factor 0.1405) 2143.41
TOTAL 32641.83
Add 15% CPOH on "Y-A" 2609.85
TOTAL 35251.67
Add Cess @ 1% on "Z-A" 200.09
Cost of 10 metre pile 35451.76
Cost of 1 metre pile 3545.18
Say 3545.20
20.3.4 550 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 metres
MATERIAL
R.C.C
Stem -3.14/4x(0.50)²x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)²x0.125 = 0.153 cum
2x 3.14/4x(0.875)²x0.375 = 0.451 cum
= 2.396 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 2.40 7997.30 19193.52
7183 Bentonite tonne 0.20 2800.00 560.00
9999 Sundries L.S. 210.00 2.12 445.20
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.36 35000.00 12600.00
0025 Hire and running charges of light crane. day 0.06 3500.00 210.00
0026 Hire and running charges of bentonite pump. day 0.02 3000.00 60.00
LABOUR
Work supervisor
0130 Mistry day 0.08 784.00 62.72
0114 Beldar day 2.00 645.00 1290.00
TOTAL 34421.44
Add 1 % Water charges on "W-A" 152.28
TOTAL 34573.72
Add GST on "X-A" (multiplying factor 0.1405) 2160.92
TOTAL 36734.64
Add 15% CPOH on "Y-A" 2631.17
TOTAL 39365.80
Add Cess @ 1% on "Z-A" 201.72
Cost of 10 metre pile 39567.53
Cost of 1 metre pile 3956.75
Say 3956.75
20.4 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs
paid)
20.4.1 300 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 bulb.
MATERIAL
Bulb - 0.033 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 0.033 7997.30 263.91
7183 Bentonite tonne 0.003 2800.00 8.40
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.02 35000.00 700.00
0025 Hire and running charges of light crane. day 0.01 3500.00 35.00
0026 Hire and running charges of bentonite pump. day 0.01 3000.00 30.00
LABOUR
Work supervisor
0130 Mistry day 0.02 784.00 15.68
0114 Beldar day 1.00 645.00 645.00
TOTAL 1697.99
Add 1 % Water charges on "W-A" 14.34
TOTAL 1712.33
Add GST on "X-A" (multiplying factor 0.1405) 203.50
TOTAL 1915.83
Add 15% CPOH on "Y-A" 247.79
TOTAL 2163.62
Add Cess @ 1% on "Z-A" 19.00
Cost of 1 bulb 2182.62
Say 2182.60
20.4.2 400 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 bulb.
MATERIAL
Bulb - 0.063 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 0.063 7997.30 503.83
7183 Bentonite tonne 0.006 2800.00 16.80
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.02 35000.00 700.00
0025 Hire and running charges of light crane. day 0.01 3500.00 35.00
0026 Hire and running charges of bentonite pump. day 0.01 3000.00 30.00
LABOUR
Work supervisor
0130 Mistry day 0.02 784.00 15.68
0114 Beldar day 1.00 645.00 645.00
TOTAL 1946.31
Add 1 % Water charges on "W-A" 14.42
TOTAL 1960.73
Add GST on "X-A" (multiplying factor 0.1405) 204.70
TOTAL 2165.43
Add 15% CPOH on "Y-A" 249.24
TOTAL 2414.67
Add Cess @ 1% on "Z-A" 19.11
Cost of 1 bulb 2433.78
Say 2433.80

20.4.3 450 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 bulb.
MATERIAL
Bulb - 0.081 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 0.081 7997.30 647.78
7183 Bentonite tonne 0.008 2800.00 22.40
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.02 35000.00 700.00
0025 Hire and running charges of light crane. day 0.01 3500.00 35.00
0026 Hire and running charges of bentonite pump. day 0.01 3000.00 30.00
LABOUR
Work supervisor
0130 Mistry day 0.02 784.00 15.68
0114 Beldar day 1.00 645.00 645.00
TOTAL 2095.86
Add 1 % Water charges on "W-A" 14.48
TOTAL 2110.34
Add GST on "X-A" (multiplying factor 0.1405) 205.49
TOTAL 2315.83
Add 15% CPOH on "Y-A" 250.21
TOTAL 2566.04
Add Cess @ 1% on "Z-A" 19.18
Cost of 1 bulb 2585.22
Say 2585.20
20.4.4 550 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 bulb.
MATERIAL
Bulb - 0.102 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 0.102 7997.30 815.72
7183 Bentonite tonne 0.01 2800.00 28.00
MACHINERY
0024 Hire and running charges of hydraulic piling rig with power unit
etc. including complete accessories and shifting at site. day 0.02 35000.00 700.00
0025 Hire and running charges of light crane. day 0.01 3500.00 35.00
0026 Hire and running charges of bentonite pump. day 0.02 3000.00 60.00
LABOUR
Work supervisor
0130 Mistry day 0.02 784.00 15.68
0114 Beldar day 1.00 645.00 645.00
TOTAL 2299.40
Add 1 % Water charges on "W-A" 14.84
TOTAL 2314.24
Add GST on "X-A" (multiplying factor 0.1405) 210.54
TOTAL 2524.78
Add 15% CPOH on "Y-A" 256.36
TOTAL 2781.14
Add Cess @ 1% on "Z-A" 19.65
Cost of 1 bulb 2800.80
Say 2800.80
20.5 Providing, driving (with vibrating pile driving hammer complete with power units & accessories) and installing driven Pre-cast reinforced
concrete piles of specified diameter and length below the pile cap in M-25 cement concrete to carry safe working load not less than specified with a c
through preformed hole with M.S. black pipe of dia, 40 mm for grouting with cement sand grouting of mix 1:2 (1cement : 2 coarse sand) under suffici
pressure to ensure complete filling including centring, shuttering, driving and removing the steel casing pipe and lifting casing etc. complete but exc
cost of steel reinforcement. (Length of pile for payment shall be measured from top of the shoe to the bottom of pile cap).
20.5.1 400 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.40)²x20 = 2.51 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 2.51 7997.30 20073.22
5.19 Add Rate as per item no 5.19 of SH : RCC cum 2.51 14191.95 35621.79
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -2.51 7945.65 -19943.58
Cement mortar 1:2 for grout
3.7 Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block for 2 pile L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 56025.04
Add 1 % Water charges on "W-A" 202.74
TOTAL 56227.77
Add GST on "X-A" (multiplying factor 0.1405) 2876.93
TOTAL 59104.70
Add 15% CPOH on "Y-A" 3502.99
TOTAL 62607.69
Add Cess @ 1% on "Z-A" 268.56
Cost of 20 metre pile 62876.25
Cost of 1 metre pile 3143.81
Say 3143.80
20.5.2 450 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.45)²x20 = 3.18 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.18 7997.30 25431.41
5.19 Add Rate as per item no 5.19 SH : RCC cum 3.18 14191.95 45130.40
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -3.18 7945.65 -25267.17
Cement mortar 1:2 for grout
3.7 Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block per two piles L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 1.08 784.00 846.72
0114 Beldar day 10.78 645.00 6953.10
TOTAL 71338.99
Add 1 % Water charges on "W-A" 260.44
TOTAL 71599.43
Add GST on "X-A" (multiplying factor 0.1405) 3695.82
TOTAL 75295.25
Add 15% CPOH on "Y-A" 4500.09
TOTAL 79795.35
Add Cess @ 1% on "Z-A" 345.01
Cost of 20 metre pile 80140.35
Cost of 1 metre pile 4007.02
Say 4007.00

20.5.3 500 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.50)²x20 = 3.925 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 3.925 7997.30 31389.40
5.19 Add Rate as per item no 5.19 SH : RCC cum 3.925 14191.95 55703.40
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -3.925 7945.65 -31186.68
3.7 Cement mortar 1:2 for grout
Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block per two piles L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 76179.73
Add 1 % Water charges on "W-A" 202.74
TOTAL 76382.47
Add GST on "X-A" (multiplying factor 0.1405) 2876.93
TOTAL 79259.39
Add 15% CPOH on "Y-A" 3502.99
TOTAL 82762.38
Add Cess @ 1% on "Z-A" 268.56
Cost of 20 metre pile 83030.94
Cost of 1 metre pile 4151.55
Say 4151.55
20.5.4 550 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.55)²x20 = 4.75 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 4.75 7997.30 37987.18
5.19 Add Rate as per item no 5.19 SH : RCC cum 4.75 14191.95 67411.76
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -4.75 7945.65 -37741.84
3.7 Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block per two piles L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 87930.70
Add 1 % Water charges on "W-A" 202.74
TOTAL 88133.44
Add GST on "X-A" (multiplying factor 0.1405) 2876.93
TOTAL 91010.36
Add 15% CPOH on "Y-A" 3502.99
TOTAL 94513.35
Add Cess @ 1% on "Z-A" 268.56
Cost of 20 metre pile 94781.91
Cost of 1 metre pile 4739.10
Say 4739.10

20.5.5 750 mm dia piles

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.75)²x20 = 10.88 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 10.88 7997.30 87010.62
5.19 Add Rate as per item no 5.19 SH : RCC cum 10.88 14191.95 154408.42
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -10.88 7945.65 -86448.67
3.7 Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block per two piles L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 175243.97
Add 1 % Water charges on "W-A" 202.74
TOTAL 175446.71
Add GST on "X-A" (multiplying factor 0.1405) 2876.93
TOTAL 178323.63
Add 15% CPOH on "Y-A" 3502.99
TOTAL 181826.62
Add Cess @ 1% on "Z-A" 268.56
Cost of 20 metre pile 182095.18
Cost of 1 metre pile 9104.76
Say 9104.75
20.5.6 1000 mm dia piles
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(1.00)²x20 = 15.70 cum
5.33.1.1 Rate as per item no 5.33.1.1 of SH : RCC Work cum 15.7 7997.30 125557.61
5.19 Add Rate as per item no 5.19 SH : RCC cum 15.7 14191.95 222813.62
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC cum -15.7 7945.65 -124746.71
3.7 Rate as per Item Number 3.7 of SH: Mortars cum 0.025 5699.25 142.48
9999 Wooden block @ 1 block per two piles L.S. 442.00 2.12 937.04
7181 C.I. pile shoe of 80 kg per pile kilogram 80.00 48.00 3840.00
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 35.00 43.00 1505.00
@ 35 kg per pile
MACHINERY
0027 Hire and running charges of vibrating pile driving hammer
complete with power unit and accessories . day 0.38 30000.00 11400.00
0028 Hire and running charges of crane 20 tonne capacity. day 0.06 7000.00 420.00
LABOUR
Work supervisor
0130 Mistry day 0.12 784.00 94.08
0114 Beldar day 3.00 645.00 1935.00
TOTAL 243898.12
Add 1 % Water charges on "W-A" 202.74
TOTAL 244100.86
Add GST on "X-A" (multiplying factor 0.1405) 2876.93
TOTAL 246977.78
Add 15% CPOH on "Y-A" 3502.99
TOTAL 250480.77
Add Cess @ 1% on "Z-A" 268.56
Cost of 20 metre pile 250749.33
Cost of 1 metre pile 12537.47
Say 12537.45

20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles me
preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

20.6.1 Single pile upto 50 tonne Safe capacity

20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 test
7246 Verticle load testing (INITIAL) of piles in accordance with IS :
2911 (Part-IV) including installation of loading platform and
prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per
specification and upto 50MT capacity pile. per test 1.00 38500.00 38500.00
TOTAL 38500.00
Add 1 % Water charges on "W" 385.00
TOTAL 38885.00
Add GST on "X" (multiplying factor 0.1405) 5463.34
TOTAL 44348.34
Add 15% CPOH on "Y" 6652.25
TOTAL 51000.59
Add Cess @ 1% on "Z" 510.01
Cost per test 51510.60
Say 51510.60
20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 test
7249 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Single pile
upto 50 tonne capacity per test 1.00 13800.00 13800.00
TOTAL 13800.00
Add 1 % Water charges on "W" 138.00
TOTAL 13938.00
Add GST on "X" (multiplying factor 0.1405) 1958.29
TOTAL 15896.29
Add 15% CPOH on "Y" 2384.44
TOTAL 18280.73
Add Cess @ 1% on "Z" 182.81
Cost per test 18463.54
Say 18463.55

20.6.2 Single pile above 50 tonne and upto 100 tonne Safe capacity
20.6.2.1 Initial test (Test Load 2.5 times the Safe capacity)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7247 Verticle load testing (INITIAL) of piles in accordance with IS :
2911 (Part-IV) including installation of loading platform and
prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per
specification & above 50MT and upto 100MT. per test 1.00 43000.00 43000.00

TOTAL 43000.00
Add 1 % Water charges on "W" 430.00
TOTAL 43430.00
Add GST on "X" (multiplying factor 0.1405) 6101.92
TOTAL 49531.92
Add 15% CPOH on "Y" 7429.79
TOTAL 56961.70
Add Cess @ 1% on "Z" 569.62
Cost per test 57531.32
Say 57531.30

20.6.2.2 Routine test (Test Load 1.5 times the Safe capacity)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7250 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Single pile
above 50 tonne capacity pile and upto 100 tonne capacity pile
per test 1.00 22800.00 22800.00
TOTAL 22800.00
Add 1 % Water charges on "W" 228.00
TOTAL 23028.00
Add GST on "X" (multiplying factor 0.1405) 3235.43
TOTAL 26263.43
Add 15% CPOH on "Y" 3939.52
TOTAL 30202.95
Add Cess @ 1% on "Z" 302.03
Cost per test 30504.98
Say 30505.00
20.6.3 Group of two or more piles upto 50 tonne Safe capacity
20.6.3.1 Initial test (Test Load 2.5 times the Safe capacity)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 test
7248 Verticle load testing (INITIAL) of piles in accordance with IS :
2911 (Part-IV) including installation of loading platform and
prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per
specification & group of two or more upto 50MT. per test 1.00 49500.00 49500.00
TOTAL 49500.00
Add 1 % Water charges on "W" 495.00
TOTAL 49995.00
Add GST on "X" (multiplying factor 0.1405) 7024.30
TOTAL 57019.30
Add 15% CPOH on "Y" 8552.89
TOTAL 65572.19
Add Cess @ 1% on "Z" 655.72
Cost per test 66227.91
Say 66227.90

20.6.3.2 Routine test (Test Load 1.5 times the Safe capacity)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7251 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Group of two
piles upto 50 tonne capacity each per test 1.00 28500.00 28500.00
TOTAL 28500.00
Add 1 % Water charges on "W" 285.00
TOTAL 28785.00
Add GST on "X" (multiplying factor 0.1405) 4044.29
TOTAL 32829.29
Add 15% CPOH on "Y" 4924.39
TOTAL 37753.69
Add Cess @ 1% on "Z" 377.54
Cost per test 38131.22
Say 38131.20
20.7 Cyclic vertical load testing of pile in accordance with IS Code of practice IS:2911 (part IV) by Kentledge method including preparation of
for.
20.7.1 Single pile
20.7.1.1 Upto 50 tonne Safe capacity pile

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7249 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Single pile
upto 50 tonne capacity per test 1.00 13800.00 13800.00
TOTAL 13800.00
Add 1 % Water charges on "W" 138.00
TOTAL 13938.00
Add GST on "X" (multiplying factor 0.1405) 1958.29
TOTAL 15896.29
Add 15% CPOH on "Y" 2384.44
TOTAL 18280.73
Add Cess @ 1% on "Z" 182.81
Cost per test 18463.54
Say 18463.55
20.7.1.2 Above 50 tonne and upto 100 tonne Safe capacity pile
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 test
7250 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Single pile
above 50 tonne capacity pile and upto 100 tonne capacity pile
per test 1.00 22800.00 22800.00
TOTAL 22800.00
Add 1 % Water charges on "W" 228.00
TOTAL 23028.00
Add GST on "X" (multiplying factor 0.1405) 3235.43
TOTAL 26263.43
Add 15% CPOH on "Y" 3939.52
TOTAL 30202.95
Add Cess @ 1% on "Z" 302.03
Cost per test 30504.98
Say 30505.00

20.7.2 Group of two or more piles


20.7.2.1 Upto 400 tonne Safe capacity of group

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7251 Cyclic verticle load testing of piles in accordance with IS : 2911
(Part-IV) including prepration of pile head etc. for Group of two
piles upto 50 tonne capacity each per test 1.00 28500.00 28500.00
TOTAL 28500.00
Add 1 % Water charges on "W" 285.00
TOTAL 28785.00
Add GST on "X" (multiplying factor 0.1405) 4044.29
TOTAL 32829.29
Add 15% CPOH on "Y" 4924.39
TOTAL 37753.69
Add Cess @ 1% on "Z" 377.54
Cost per test 38131.22
Say 38131.20
20.8 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on
20.8.1 Upto 50 tonne capacity pile

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 1 test
7252 Lateral load testing of single pile in accordance with IS : 2911
part -IV for determining safe allowable lateral load on pile. Upto
50 tonne capacity per test 1.00 13800.00 13800.00
TOTAL 13800.00
Add 1 % Water charges on "W" 138.00
TOTAL 13938.00
Add GST on "X" (multiplying factor 0.1405) 1958.29
TOTAL 15896.29
Add 15% CPOH on "Y" 2384.44
TOTAL 18280.73
Add Cess @ 1% on "Z" 182.81
Cost per test 18463.54
Say 18463.55
20.8.2 Above 50 tonne and upto 100 tonne capacity pile
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 1 test
7253 Lateral load testing of single pile in accordance with IS : 2911
part -IV for determining safe allowable lateral load on pile.
Above 50 tonne capacity per test 1.00 23100.00 23100.00
TOTAL 23100.00
Add 1 % Water charges on "W" 231.00
TOTAL 23331.00
Add GST on "X" (multiplying factor 0.1405) 3278.01
TOTAL 26609.01
Add 15% CPOH on "Y" 3991.35
TOTAL 30600.36
Add Cess @ 1% on "Z" 306.00
Cost per test 30906.36
Say 30906.35
20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface pr
pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for cond
the test & submission of results, all complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for one pit test (Ten pits in
one day)
MATERIAL
0081 Pile Integrity testing equipment day 0.10 3000.00 300.00
LABOUR
0160 Technician day 0.10 853.00 85.30
0161 Helper (Technician) day 0.10 645.00 64.50
Miscllaneous
9999 Reporting charges L.S. 100.67 2.12 213.42
9977 Transportation and consumables etc. L.S. 33.56 2.12 71.15
TOTAL 734.37
Add 1 % Water charges on "W" 7.34
TOTAL 741.71
Add GST on "X" (multiplying factor 0.1405) 104.21
TOTAL 845.92
Add 15% CPOH on "Y" 126.89
TOTAL 972.81
Add Cess @ 1% on "Z" 9.73
Cost per test 982.54
Say 982.55
SUB HEAD : 21.0
ALUMINIUM WORK
1405
21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular se
appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia a
including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiu
shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for g
paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,
dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 40.02 kg
MATERIAL
(i) External member of the frame (Jindal section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Add 5% wastage = 2.00 kg
Total = 42.02 kg
7306 Aluminium T or L sections kilogram 42.02 190.00 7983.80
(v) C.P. brass /stainless steel screws 20 mm for cleat angle
18x4 = 72 Nos
0589 Chromium plated Brass screws 20 mm 100 Nos 0.72 160.00 115.20
(vi)
7389 Anodising 15 microns on aluminium sections kilogram 42.02 38.00 1596.76
(vii)
9977 Carriage of material L.S. 52.00 2.12 110.24
LABOUR
For fabrication of frame
0116 Fitter (grade 1) day 2.00 784.00 1568.00
0139 Skilled Beldar (for floor rubbing etc.) day 1.00 714.00 714.00
0114 Beldar day 1.00 645.00 645.00
0100 Bandhani day 0.05 714.00 35.70
9999 Labour for drilling holes, hire charges of drill, electricity charges,
carriage of dash hold fastners and sundries L.S. 100.00 2.12 212.00
TOTAL 12980.70
Add 1 % Water charges on "W" 129.81
TOTAL 13110.51
Add GST on "X" (multiplying factor 0.1405) 1842.03
TOTAL 14952.53
Add 15% CPOH on "Y" 2242.88
TOTAL 17195.41
Add Cess @ 1% on "Z" 171.95
Cost for 40.02 kg 17367.37
Cost for 1 kg 433.97
Say 433.95
21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 40.02 kg
MATERIAL
(i) External member of the frame (Jindal section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m
= 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Add 5% wastage = 2.00 kg
Total = 42.02 kg
7306 Aluminium T or L sections kilogram 42.02 190.00 7983.80
(v) C.P. brass /stainless steel screws 20 mm for cleat angle
18x4 = 72 Nos
0589 Chromium plated Brass screws 20 mm 100 Nos 0.72 160.00 115.20
(vi) Epoxy
7392 Powder coating 50 microns on aluminium sections kilogram 42.02 61.00 2563.22
(vii)
9977 Carriage of material L.S. 52.00 2.12 110.24
LABOUR
For fabrication of frame
0116 Fitter (grade 1) day 2.00 784.00 1568.00
0139 Skilled Beldar (for floor rubbing etc.) day 1.00 714.00 714.00
0114 Beldar day 1.00 645.00 645.00
0100 Bandhani day 0.05 714.00 35.70
9999 Labour for drilling holes, hire charges of drill, electricity charges,
carriage of dash hold fastners and sundries L.S. 100.00 2.12 212.00
TOTAL 13947.16
Add 1 % Water charges on "W" 139.47
TOTAL 14086.63
Add GST on "X" (multiplying factor 0.1405) 1979.17
TOTAL 16065.80
Add 15% CPOH on "Y" 2409.87
TOTAL 18475.67
Add Cess @ 1% on "Z" 184.76
Cost for 40.02 kg 18660.43
Cost for 1 kg 466.28
Say 466.30

21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 40.02 kg MATERIAL
(i) External member of the frame (Jindal section no 4605) V = 2x2.40 =
4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604) V = 2x2.40 =
4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no 4407)
7306 2x6x2 (1.14+0.95) = 50.16 m kilogram 42.02 190.00 7983.80
0589 Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg 100 Nos 0.72 160.00 115.20
7393 (iv) Angle cleat 38x38x4.8 mm 50 mm long 18x0.05 = 0.900 m @ 0.985 kilogram L.S. 42.02 67.00 2815.34
9977 kg/m = 0.89 kg Sub total =40.02 kg day day day day 52.00 2.12 110.24
0116 Add 5% wastage = 2.00 kg Total = 42.02 kg Aluminium T or L sections L.S. 2.00 784.00 1568.00
0139 (v) C.P. brass /stainless steel screws 20 mm for cleat angle 18x4 = 72 1.00 714.00 714.00
0114 Nos 1.00 645.00 645.00
0100 Chromium plated Brass screws 20 mm (vi) 0.05 714.00 35.70
9999 Polyester powder coating 50 microns on aluminium sections (vii) 100.00 2.12 212.00
Carriage of material LABOUR 14199.28
For fabrication of frame Fitter (grade 1) 141.99
Skilled Beldar (for floor rubbing etc.) Beldar 14341.27
Bandhani 2014.95
Labour for drilling holes, hire charges of drill, electricity charges, 16356.22
carriage of dash hold fastners and sundries 2453.43
TOTAL 18809.65
Add 1 % Water charges on "W" TOTAL 188.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 18997.75
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost for 40.02 kg
Cost for 1 kg
Say

474.71
474.70
21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of f
wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20.21 kg
MATERIAL
(i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m
= 5.95 kg
(ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465
kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48
kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m =
1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long 3x4x0.035 =
0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Add 5% wastage = 1.03 kg Total = 21.65 kg Aluminium T or L sections

7306 kilogram 21.65 190.00 4113.50

0689 (viii) 10 Nos 0.40 393.00 157.20


0589 Anodised Aluminium butt hinges 100x75x4 mm 100 Nos 0.92 160.00 147.20
7389 (ix) C.P. brass /stainless steel screws 20 mm For cleat 12x4 = 48 kilogram L.S. 21.65 38.00 822.70
9977 For cleat 4x8 = 32 metre 31.20 2.12 66.14
7390 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 day day day day 2.35 15.00 35.25
0116 = 12 day day 1.00 784.00 784.00
0139 Total = 92 Nos L.S. 1.00 714.00 714.00
0114 Chromium plated Brass screws 20 mm (x) 0.50 645.00 322.50
0100 Anodising 15 microns on aluminium sections (xi) 0.40 714.00 285.60
0111 Carriage of material 0.20 784.00 156.80
0114 (xii) Neoprene/ EPDM gasket in groove of meeting style 0.50 645.00 322.50
9999 Neoprene/EPDM rubber gasket 50.00 2.12 106.00
LABOUR 8033.39
For fabrication Fitter (grade 1) 80.33
Skilled Beldar (for floor rubbing etc.) Beldar 8113.73
Bandhani 1139.98
For fixing the shutter including hinges : 9253.71
Carpenter 1st class Beldar 1388.06
Labour for making provision for fittings and carriage of screws etc. 10641.76
including sundries 106.42
TOTAL 10748.18
Add 1 % Water charges on "W" TOTAL 531.82
Add GST on "X" (multiplying factor 0.1405) TOTAL 531.80
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost for 20.21 kg
Cost for 1 kg
Say
21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20.21 kg MATERIAL
(i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m
= 5.95 kg
(ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465
kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48
kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m =
1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long 3x4x0.035 =
0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Add 5% wastage = 1.03 kg Total = 21.65 kg Aluminium T or L sections
(viii)
Anodised Aluminium butt hinges 100x75x4 mm
(ix) C.P. brass /stainless steel screws 20 mm

7306 kilogram 10 21.65 190.00 4113.50


0689 Nos 0.40 393.00 157.20
0589 For cleat 12x4 = 48 For cleat 4x8 = 32 100 Nos 0.92 160.00 147.20
7392 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 = 12 kilogram L.S. 21.65 61.00 1320.65
9977 Total = 92 Nos metre 31.20 2.12 66.14
7390 Chromium plated Brass screws 20 mm day day day day 2.35 15.00 35.25
0116 (x) Epoxy day day 1.00 784.00 784.00
0139 Powder coating 50 microns on aluminium sections (xi) L.S. 1.00 714.00 714.00
0114 Carriage of material 0.50 645.00 322.50
0100 (xii) Neoprene/ EPDM rubber gasket in groove of meeting style 0.40 714.00 285.60
0111 Neoprene/EPDM rubber gasket LABOUR 0.20 784.00 156.80
0114 Fitter (grade 1) 0.50 645.00 322.50
9999 Skilled Beldar (for floor rubbing etc.) Beldar 50.00 2.12 106.00
Bandhani 8531.34
For fixing the shutter including hinges : 85.31
Carpenter 1st class Beldar 8616.66
Labour for making provision for fittings and carriage of screws etc. 1210.64
including sundries 9827.30
TOTAL 1474.09
Add 1 % Water charges on "W" TOTAL 11301.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 113.01
Add 15% CPOH on "Y" TOTAL 11414.41
Add Cess @ 1% on "Z" Cost for 20.21 kg 564.79
Cost for 1 kg 564.80
Say

21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 20.21 kg
MATERIAL
(i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m
= 5.95 kg
(ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465
kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48
kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m =
1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg Sub total = 20.62 kg
Add 5% wastage = 1.03 kg Total = 21.65 kg Aluminium T or L sections
(viii)
Anodised Aluminium butt hinges 100x75x4 mm
(ix) C.P. brass /stainless steel screws 20 mm For cleat 12x4 = 48

7306 kilogram 10 21.65 190.00 4113.50


0689 Nos 0.40 393.00 157.20

0589 For cleat 4x8 = 32 100 Nos 0.92 160.00 147.20


7393 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 kilogram L.S. 21.65 67.00 1450.55
9977 = 12 metre 31.20 2.12 66.14
7390 Total = 92 Nos day day day day 2.35 15.00 35.25
0116 Chromium plated Brass screws 20 mm (x) day day 1.00 784.00 784.00
0139 Polyester powder coating 50 microns on aluminium sections (xi) L.S. 1.00 714.00 714.00
0114 Carriage of material 0.50 645.00 322.50
0100 (xii) Neoprene/ EPDM rubber gasket in groove of meeting style 0.40 714.00 285.60
0111 Neoprene/EPDM rubber gasket LABOUR 0.20 784.00 156.80
114 For fabrication Fitter (grade 1) 0.50 645.00 322.50
9999 Skilled Beldar (for floor rubbing etc.) Beldar 50.00 2.12 106.00
Bandhani 8661.24
For fixing the shutter including hinges : 86.61
Carpenter 1st class Beldar 8747.86
Labour for making provision for fittings and carriage of screws etc. 1229.07
including sundries 9976.93
TOTAL 1496.54
Add 1 % Water charges on "W" TOTAL 11473.47
Add GST on "X" (multiplying factor 0.1405) TOTAL 114.73
Add 15% CPOH on "Y" TOTAL 11588.20
Add Cess @ 1% on "Z" Cost for 20.21 kg 573.39
Cost for 1 kg 573.40
Say
21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conformin
Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. co
architectural drawings and directions of engineer-in-charge.
21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Code Description Unit Quantity Rate Rs. Amount Rs.


7477 Details of cost for 7 sqm MATERIAL
9977 12 mm thick particle board = 7.00 sqm Add 5% wastage = 0.35 sqm
9999 Total = 7.35 sqm
0112 Prelaminated particle board with one side decorative and other side
0114 balancing lamination, flat pressed 3 layer & graded (medium density)
Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick
Carriage of particle board Sundries & screws etc. LABOUR
Carpenter 2nd class Beldar 3675.00
TOTAL 28.94
Add 1 % Water charges on "W" TOTAL 57.88
Add GST on "X" (multiplying factor 0.1405) TOTAL 642.60
Add 15% CPOH on "Y" TOTAL 645.00
7.35 500.00
Add Cess @ 1% on "Z" 5049.41
sqm L.S. 13.65 2.12
Cost for 7 sqm 50.49
L.S. 27.30 2.12
5099.91
day day 0.90 714.00
716.54
1.00 645.00
5816.45
872.47
6688.91
66.89
6755.80

Cost for 1 sqm Say 965.11


965.10

21.2.2 Pre-laminated particle board with decorative lamination on both sides

Code Description Unit Quantity Rate Rs. Amount Rs.


7480 Details of cost for 7 sqm MATERIAL
9977 12 mm thick particle board = 7.00 sqm Add 5% wastage = 0.35 sqm
9999 Total = 7.35 sqm
0112 Prelaminated particle board with both sides decorative lamination, flat
0114 pressed 3 layer & graded (medium density) Grade I, Type II conforming
to IS : 12823 (exterior grade) 12 mm thick
Carriage of particle board Sundries & screws etc. LABOUR
Carpenter 2nd class Beldar 3601.50
TOTAL 28.94
Add 1 % Water charges on "W" TOTAL 57.88
Add GST on "X" (multiplying factor 0.1405) TOTAL 642.60
Add 15% CPOH on "Y" TOTAL 645.00
Add Cess @ 1% on "Z" Cost for 7 sqm 4975.91
7.35 490.00
Cost for 1 sqm 49.76
sqm L.S. 13.65 2.12
Say 5025.67
L.S. 27.30 2.12
706.11
day day 0.90 714.00
5731.78
1.00 645.00
859.77
6591.55
65.92
6657.46
951.07
951.05
65.92
6657.46
951.07
951.05

21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene g
complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basi
21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


2406 Details of cost for 1.00 sqm MATERIAL sqm L.S. 1.10 309.00 339.90
9977 Float Glass panes 4.0 mm thick = 1.00 sqm metre 2.42 2.12 5.13
7390 Add for wastage & breakage @ 10% = 0.10 sqm Total =1.10 sqm day day L.S. 6.00 15.00 90.00
0112 Float glass sheet of nominal thickness 4 mm (weight not less than 0.23 714.00 164.22
0114 10kg/sqm). 0.23 645.00 148.35
9988 Carriage of glass Neoprene/EPDM rubber gasket LABOUR 6.89 2.12 14.61
Carpenter 2nd class Beldar 762.21
Sundries and carriage of gasket TOTAL 7.62
Add 1 % Water charges on "W" TOTAL 769.83
Add GST on "X" (multiplying factor 0.1405) TOTAL 108.16
Add 15% CPOH on "Y" TOTAL 877.99
Add Cess @ 1% on "Z" Cost for 1 sqm 131.70
Say 1009.69
10.10
1019.79
1019.80

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Code Description Unit Quantity Rate Rs. Amount Rs.
2407 Details of cost for 1.00 sqm MATERIAL sqm L.S. 1.10 515.00 566.50
9977 Glass panes 5.50 mm thick = 1.00 sqm metre 3.33 2.12 7.06
7390 Add for wastage & breakage @ 10% = 0.10 sqm Total =1.00 sqm day day L.S. 6.00 15.00 90.00
0112 Float glass sheet of nominal thickness 5 mm (weight not less than 0.23 714.00 164.22
0114 12.50 kg/sqm) 0.23 645.00 148.35
9988 Carriage of glass Neoprene/EPDM rubber gasket LABOUR 6.89 2.12 14.61
Carpenter 2nd class Beldar 990.74
Sundries and carriage of gasket TOTAL 9.91
Add 1 % Water charges on "W" TOTAL 1000.64
Add GST on "X" (multiplying factor 0.1405) TOTAL 140.59
Add 15% CPOH on "Y" TOTAL 1141.23
Add Cess @ 1% on "Z" Cost for 1 sqm 171.19
Say 1312.42
13.12
1325.54
1325.55

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Code Description Unit Quantity Rate Rs. Amount Rs.


2408 Details of cost for 1.00 sqm MATERIAL sqm L.S. 1.10 628.00 690.80
9977 Float Glass panes 8.0 mm thick = 1.00 sqm metre 4.84 2.12 10.26
7390 Add for wastage & breakage @ 10% = 0.10 sqm Total =1.10 sqm day day L.S. 6.00 15.00 90.00
0112 Float glass sheet of nominal thickness 8 mm.(weight not less than 0.23 714.00 164.22
0114 20.00 kg/sqm). 0.23 645.00 148.35
9988 Carriage of glass Neoprene/EPDM rubber gasket LABOUR 6.89 2.12 14.61
Carpenter 2nd class Beldar 1118.24
Sundries and carriage of gasket TOTAL 11.18
Add 1 % Water charges on "W" TOTAL 1129.42
Add GST on "X" (multiplying factor 0.1405) TOTAL 158.68
Add 15% CPOH on "Y" TOTAL 1288.10
Add Cess @ 1% on "Z" Cost for 1 sqm 193.22
Say 1481.32
14.81
1496.13
1496.15

21.4 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having b
embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embe
as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. shee
with slide plate etc. complete as per the direction of Engineer-in- charge.
21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

Code Description Unit Quantity Rate Rs. Amount Rs.


7394 Details of cost for one number MATERIAL each L.S. 1.00 1500.00 1500.00
9977 Double action hydraulic floor spring with stainless steel cover plate L.S. 13.00 2.12 27.56
9999 CARRIAGE cum 26.00 2.12 55.12
4.1.3 Sundries and screws Cement concrete 1:2:4 day day day day 0.002 7365.15 14.73
0123 Rate as per item no. 4.1.3 of SH : concrete work LABOUR 0.08 784.00 62.72
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Carpenter 0.08 714.00 57.12
0112 2nd class 0.01 714.00 7.14
0114 Beldar TOTAL 0.17 645.00 109.65
Add 1 % Water charges on "W-A" TOTAL 1834.04
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 18.19
Add 15% CPOH on "Y-A" TOTAL 1852.23
Add Cess @ 1% on "Z-A" Cost for each 258.17
Say 2110.40
314.35
2424.75
24.10
2448.85
2448.85

21.4.2 With brass cover plate minimum 1.25 mm thickness

Code Description Unit Quantity Rate Rs. Amount Rs.


7396 Details of cost for one number MATERIAL each L.S. 1.00 1620.00 1620.00
9977 Double action hydraulic floor spring with brass cover plate CARRIAGE L.S. 13.00 2.12 27.56
9999 Sundries and screws Cement concrete 1:2:4 cum 26.00 2.12 55.12
4.1.3 Rate as per item no. 4.1.3 of SH : concrete work LABOUR day day day day 0.002 7365.15 14.73
0123 For cutting hole and making it good Mason (brick layer) 1st class 0.08 784.00
0124 Mason (brick layer) 2nd class Carpenter 2nd class 0.08 714.00
0112 Beldar TOTAL 0.01 714.00
0114 Add 1 % Water charges on "W-A" TOTAL 0.17 645.00
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for each 62.72
Say 57.12
7.14
109.65
1954.04
19.39
1973.43
275.20
2248.63
335.09
2583.72
25.69
2609.41
2609.40

21.5 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angl
approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel
aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level ad
hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of th
charge (level adjusting
hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 6.35 kg (2.40x2.40 = 5.76 sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee of size 35x23.5x1.5 mm @
600 mm centre to centre
3x2.40 m = 7.20 m
Extra for light fittings 2x1.20 m = 2.40 m
Total= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of size 35x23.5x1.5 mm @ 600
mm centre to centre
3x4x0.60 m = 7.20 m (-) 2x0.30 = (-) 0.60 m
Total=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size 25.4x25.4x1.63 mm @ 600
mm centre to centre
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size 25.4x25.4x1.63 mm
Extra for light fittings =3x2x2 = 12.00 Corner = 4.00
For joining runners = 42.00
Total = 58.00x0.025 = 1.45 m @ 0.213 kg/m = 0.309 kg Sub total =
2.370 + 1.630 + 2.045 + 0.309 =6.354 kg
Add 5% wastage = 0.318 kg Total = 6.672 kg 1267.68
Aluminium T or L sections 1.86
(iii) C.P. brass/ stainless steel screws 20 mm for angle cleats 528.00
Chromium plated Brass screws 20 mm 406.87
(iv) Rawl plug for fixing perimeter angles Rawl plug 50 mm (designation 27.56
10 no.) Epoxy 27.56
7306 Powder coating 50 microns on aluminium sections (vi) 6.672 190.00
501.76
0589 Carriage of material (vii) 0.0116 160.00
412.80
7048 C.P. brass screws for fixing frame with suspenders LABOUR kilogram 24.00 22.00
27.56
7392 For fabrication and erection Carpenter 1st class 100 Nos each 6.67 61.00
3201.65
9977 Beldar kilogram L.S. 13.00 2.12
32.02
9999 Scaffolding and sundries TOTAL L.S. 13.00 2.12
3233.66
0111 Add 1 % Water charges on "W" TOTAL day day L.S. 0.64 784.00
454.33
0114 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.64 645.00
3687.99
9999 Add 15% CPOH on "Y" TOTAL 13.00 2.12
553.20
Add Cess @ 1% on "Z" Cost for 6.35 kg 4241.19
Cost for 1 kg 42.41
Say 4283.60
674.58
674.60

21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleat
G.I. flat 40x3mm size 60 mm long and stainless steel expandable
dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7395 Details of cost for 23 nos (hangers in 2.40 mx 2.40 m = 5.76 sqm)one each 23.00 20.00 460.00
0992 number quintal 0.014 5000.00 70.00
7388 MATERIAL each L.S. 23.00 10.00 230.00
9977 6 mm dia G.I. adjustable hangers including clips (upto 1.20 metre day day 5.20 2.12 11.02
0111 length). 0.35 784.00 274.40
0114 For light fitting 2x4 = 8.00 For runners = 15.00 Total = 23.00 0.27 645.00 174.15
6 mm dia. G.I. adjustable hangers including clips (upto 1.2 m length) 1219.57
Ceiling cleats 12.20
G.I. flat 40X3 mm 60mm long 1231.77
23x0.06 = 1.38 m @ 0.95kg/m = 1.31kg Add 5% wastage = 0.07 kg 173.06
Total = 1.38 kg say 0.014 q Galvanised steel plain sheets 1404.83
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt 210.73
Carriage of materials LABOUR 1615.56
Carpenter 1st class Beldar 16.16
TOTAL 1631.71
Add 1 % Water charges on "W" TOTAL 70.94
Add GST on "X" (multiplying factor 0.1405) TOTAL 70.95
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost for 23 hangers Cost for one hanger
Say

21.7 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium
machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one si
shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15
staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in hole
complete as per direction of Engineer-in-charge.
21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anod
grade AC 15)

Code Description Unit Quantity Rate Rs. Amount Rs.


2704 Details of cost for 7.00 kg MATERIAL kilogram 7.35 240.00 1764.00
7389 Anodised aluminium sheet 2.5 mm thick, 170 mm wide 5.88 m x0.17 m kilogram 100 7.35 38.00 279.30
7347 = 1.00 sqm @ 7.00 kg/ Nos 0.30 27.00 8.10
7348 sqm = 7.00 kg 100 Nos 0.30 10.00 3.00
8776 Add 5% wastage = 0.35 kg Total = 7.35 kg each L.S. 30.00 17.00 510.00
9977 Aluminium Strip 40 mm wide and 2 mm thick Anodising 15 microns on day day L.S. 6.50 2.12 13.78
0112 aluminium sections 0.392 714.00 279.89
0114 Cadmium plated full threaded steel screws (30x4 mm dia.) Aluminium 0.392 645.00 252.84
9999 washer 2 mm thick 15 mm dia 21.45 2.12 45.47
Stainless steel dash fastener of 8 mm dia and 75 mm long bolt 3156.38
Carriage of materials LABOUR 31.56
Carpenter 2nd class Beldar 3187.95
Sundries including machine work TOTAL 447.91
Add 1 % Water charges on "W" TOTAL 3635.85
Add GST on "X" (multiplying factor 0.1405) TOTAL 545.38
Add 15% CPOH on "Y" TOTAL 4181.23
Add Cess @ 1% on "Z" Cost for 7.00 kg 41.81
Cost for 1 kg 4223.04
Say 603.29
603.30

21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

Code Description Unit Quantity Rate Rs. Amount Rs.


2704 Details of cost for 7.00 kg MATERIAL kilogram 7.35 240.00 1764.00
7392 Anodised aluminium sheet 2.5 mm thick, 170 mm wide 5.88 m x0.17 m kilogram 100 7.35 61.00 448.35
7347 = 1.00 sqm @ 7.00 kg/sqm = 7.00 kg Nos 0.30 27.00 8.10
7348 Add 5% wastage = 0.35 kg Total = 7.35 kg 100 Nos 0.30 10.00 3.00
8776 Aluminium Strip 40 mm wide and 2 mm thick Powder coating 50 each L.S. 30.00 17.00 510.00
9977 microns on aluminium sections day day L.S. 6.50 2.12 13.78
0112 Cadmium plated full threaded steel screws (30x4 mm dia.) Aluminium 0.392 714.00 279.89
0114 washer 2 mm thick 15 mm dia 0.392 645.00 252.84
9999 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt 21.45 2.12 45.47
Carriage of materials LABOUR 3325.43
Carpenter 2nd class Beldar 33.25
Sundries including machine work TOTAL 3358.69
Add 1 % Water charges on "W" TOTAL 471.90
Add GST on "X" (multiplying factor 0.1405) TOTAL 3830.58
Add 15% CPOH on "Y" TOTAL 574.59
Add Cess @ 1% on "Z" Cost for 7.00 kg 4405.17
Cost for 1 kg 44.05
Say 4449.22
635.60
635.60
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backe
approved quality as per architectural drawings and direction of Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width

Code Description Unit Quantity Rate Rs. Amount Rs.


8646 Details of cost for 1 metre MATERIAL cartridge 0.087 112.00 9.74
8654 Silicon sealant (i/c 5% wastage) Masking tape Sundries & profile metre L.S. 2.00 2.18 4.36
9999 LABOUR L.S. 2.60 2.12 5.51
9999 TOTAL 20.80 2.12 44.10
Add 1 % Water charges on "W" TOTAL 63.71
Add GST on "X" (multiplying factor 0.1405) TOTAL 0.64
Add 15% CPOH on "Y" TOTAL 64.35
Add Cess @ 1% on "Z" Cost for 1 metre 9.04
Say 73.39
11.01
84.40
0.84
85.24
85.25

21.9 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections.
21.9.1 For fixed portion

Code Description Unit Quantity Rate Rs. Amount Rs.


7391 Details of cost for 41.09 kg Difference in cost of kilogram 41.09 48.00 1972.32
7389 Anodising 25 microns on aluminium sections Anodising 15 microns on kilogram -41.09 38.00 -1561.42
aluminium sections TOTAL 410.90
Add 1 % Water charges on "W" TOTAL 4.11
Add GST on "X" (multiplying factor 0.1405) TOTAL 415.01
Add 15% CPOH on "Y" TOTAL 58.31
Add Cess @ 1% on "Z" Cost for 41.09 kg 473.32
Cost for 1 kg 71.00
Say 544.32
5.44
549.76
13.38
13.40

21.9.2 For shutters of doors, windows & ventilators

Code Description Unit Quantity Rate Rs. Amount Rs.


7391 Details of cost for 21.65 kg Difference in cost of kilogram 21.65 48.00 1039.20
7389 Anodising 25 microns on aluminium sections Anodising 15 microns on kilogram -21.65 38.00 -822.70
aluminium sections TOTAL 216.50
Add 1 % Water charges on "W" TOTAL 2.17
Add GST on "X" (multiplying factor 0.1405) TOTAL 218.67
Add 15% CPOH on "Y" TOTAL 30.72
Add Cess @ 1% on "Z" Cost for 21.65kg 249.39
Cost for 1 kg 37.41
Say 286.80
2.87
289.66
13.38
13.40
Say 286.80
2.87
289.66
13.38
13.40

21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm
float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both prim
secondary sealant) etc. as
per specifications, drawings and direction of Engineer-in-charge complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


8648 Details of cost for 1.00 sqm MATERIAL
9977 Hermetically sealled double glazed unit made with 6mm thick clear float
7390 glass both side having 12 mm air gap = 1.00 sqm.
0112 Add for wastage & breakage @ 10% = 0.10 sqm Total = 1.10 sqm
0114 Hermetically sealed double glazed unit made with 6 mm thick clear float
9988 glass both side having 12 mm air gap
Carriage of glass Neoprene/EPDM rubber gasket LABOUR
Glazier / 2420.00
Carpenter 2nd class Beldar 14.12
Sundries and carriage of gasket TOTAL 90.00
Add 1 % Water charges on "W" TOTAL 164.22
Add GST on "X" (multiplying factor 0.1405) TOTAL 296.70
Add 15% CPOH on "Y" TOTAL 1.10 2200.00 14.61
Add Cess @ 1% on "Z" Cost for 1 sqm 6.66 2.12 2999.65
sqm L.S.
Say 6.00 15.00 30.00
metre
0.23 714.00 3029.64
day day L.S.
0.46 645.00 425.66
6.89 2.12 3455.31
518.30
3973.60
39.74
4013.34
4013.35

21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainl
screws etc. to the side hung windows as per direction of Engineer-in- charge complete.
21.11.1 205 X 19 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


8649 Details of cost for 10 nos. MATERIAL each 100 nos 10.00 197.80 1978.00
8647 Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19 L.S. 0.40 35.84 14.34
9977 mm day day 2.73 2.12 5.79
0112 Stainless steel screws 30 mm x4 mm CARRIAGE 0.14 714.00 99.96
0114 LABOUR 0.14 645.00 90.30
Carpenter 2nd class Beldar 2188.38
TOTAL 21.88
Add 1 % Water charges on "W" TOTAL 2210.27
Add GST on "X" (multiplying factor 0.1405) TOTAL 310.54
Add 15% CPOH on "Y" TOTAL 2520.81
Add Cess @ 1% on "Z" Cost for 10 nos 378.12
Cost for each 2898.93
Say 28.99
2927.92

292.79
292.80
21.11.2 255 X 19 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
8650 Details of cost for 10 nos. MATERIAL each 100 nos 10.00 225.00 2250.00
8647 Stainless steel (SS 304 grade) adjustable 255 x 19mm Stainless steel L.S. 0.40 35.84 14.34
9977 screws 30 mm x4 mm day day 2.73 2.12 5.79
0112 CARRIAGE LABOUR 0.14 714.00 99.96
0114 Carpenter 2nd class Beldar 0.14 645.00 90.30
TOTAL 2460.38
Add 1 % Water charges on "W" TOTAL 24.60
Add GST on "X" (multiplying factor 0.1405) TOTAL 2484.99
Add 15% CPOH on "Y" TOTAL 349.14
Add Cess @ 1% on "Z" Cost for 10 nos 2834.13
Cost for each 425.12
Say 3259.25
32.59
3291.84
329.18
329.20

21.11.3 355 X 19 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


8651 Details of cost for 10 nos. MATERIAL each 100 nos 10.00 195.00 1950.00
8647 Stainless steel (SS 304 grade) adjustable friction window stay 355 x 19 L.S. 0.40 35.84 14.34
9977 mm day day 2.73 2.12 5.79
0112 Stainless steel screws 30 mm x4 mm CARRIAGE 0.14 714.00 99.96
0114 LABOUR 0.14 645.00 90.30
Carpenter 2nd class Beldar 2160.38
TOTAL 21.60
Add 1 % Water charges on "W" TOTAL 2181.99
Add GST on "X" (multiplying factor 0.1405) TOTAL 306.57
Add 15% CPOH on "Y" TOTAL 2488.56
Add Cess @ 1% on "Z" Cost for 10 nos 373.28
Cost for each 2861.84
Say 28.62
2890.46
289.05
289.05

21.11.4 510 X 19 mm

Code Description Unit Quantity Rate Rs. Amount Rs.


8652 Details of cost for 10 nos. MATERIAL each 100 nos 10.00 535.00 5350.00
8647 Stainless steel (SS 304 grade) adjustable friction window stay 510 x 19 L.S. 0.40 35.84 14.34
9977 mm day day 2.73 2.12 5.79
0112 Stainless steel screws 30 mm x4 mm CARRIAGE 0.14 714.00 99.96
0114 LABOUR 0.14 645.00 90.30
Carpenter 2nd class Beldar 5560.38
TOTAL 55.60
Add 1 % Water charges on "W" TOTAL 5615.99
Add GST on "X" (multiplying factor 0.1405) TOTAL 789.05
Add 15% CPOH on "Y" TOTAL 6405.03
Add Cess @ 1% on "Z" Cost for 10 nos 960.76
Cost for each 7365.79
Say 73.66
7439.45
743.94
743.95
7439.45
743.94
743.95

21.11.5 710 X 19 mm
Code Description Unit Quantity Rate Rs. Amount Rs.
8653 Details of cost for 10 nos. each 100 nos 10.00 925.00 9250.00
8647 MATERIAL L.S. 0.40 35.84 14.34
9977 Stainless steel (SS 304 grade) adjustable friction window stay 710 x 19 day day 2.73 2.12 5.79
0112 mm 0.14 714.00 99.96
0114 Stainless steel screws 30 mm x4 mm CARRIAGE 0.14 645.00 90.30
LABOUR 9460.38
Carpenter 2nd class Beldar 94.60
TOTAL 9554.99
Add 1 % Water charges on "W" TOTAL 1342.48
Add GST on "X" (multiplying factor 0.1405) TOTAL 10897.46
Add 15% CPOH on "Y" TOTAL 1634.62
Add Cess @ 1% on "Z" Cost for 10 nos 12532.08
Cost for each 125.32
Say 12657.40
1265.74
1265.75

21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .comple
direction of Engineer-in-Charge.
21.12.1 Anodized (AC 15 ) aluminium tubular handle bar

Code Description Unit Quantity Rate Rs. Amount Rs.


7306 Details of cost for 10 nos handle bar. MATERIAL kilogram 16.34 190.00 3104.60
7389 10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 kilogram L.S. 16.34 38.00 620.92
9977 cum 100 nos day 4.42 2.12 9.37
8647 0.0057 cum @ 2710 kg/ cum = 15.56kg Add 5% wastage 0.78 kg 0.08 35.84 2.87
0111 Total = 16.34 kg Aluminium T or L sections 0.125 784.00 98.00
Anodising 15 microns on aluminium sections Carriage of material 3835.76
Stainless steel screws 30 mm x4 mm LABOUR 38.36
Carpenter 1st class TOTAL 3874.12
Add 1 % Water charges on "W" TOTAL 544.31
Add GST on "X" (multiplying factor 0.1405) TOTAL 4418.43
Add 15% CPOH on "Y" TOTAL 662.76
Add Cess @ 1% on "Z" Cost of 10 nos 5081.19
Cost of 1 no 50.81
Say 5132.00
513.20
513.20

21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar
Code Description Unit Quantity Rate Rs. Amount Rs.
7306 Details of cost for 10 nos handle bar. MATERIAL kilogram 16.34 190.00 3104.60
7392 10x22/7 x 1/4 (0.032x0.032 - 0.026 x0.026) x 2.10 = 0.0057 kilogram L.S. 16.34 61.00 996.74
9977 cum 100 nos day 4.42 2.12 9.37
8647 0.0057 cum @ 2710 kg/ cum = 15.56kg Add 5% wastage 0.78 kg 0.08 35.84 2.87
0111 Total = 16.34 kg Aluminium T or L sections Epoxy 0.125 784.00 98.00
Powder coating 50 microns on aluminium sections Carriage of material 4211.58
Stainless steel screws 30 mm x4 mm LABOUR 42.12
Carpenter 1st class TOTAL 4253.69
Add 1 % Water charges on "W" TOTAL 597.64
Add GST on "X" (multiplying factor 0.1405) TOTAL 4851.34
Add 15% CPOH on "Y" TOTAL 727.70
Add Cess @ 1% on "Z" Cost of 10 nos 5579.04
Cost of 1 no 55.79
Say 5634.83
563.48
563.50

21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

Code Description Unit Quantity Rate Rs. Amount Rs.


7306 Details of cost for 10 nos handle bar. MATERIAL kilogram 16.34 190.00 3104.60
7393 10x22/7 x 1/4 (0.032x0.032 -0.026 x 0.026) x 2.10 = 0.0057 kilogram L.S. 16.34 67.00 1094.78
9977 cum 100 nos day 4.42 2.12 9.37
8647 0.0057 cum @ 2710 kg/ cum = 15.56kg Add 5% wastage 0.78 kg 0.08 35.84 2.87
0111 Total = 16.34 kg Aluminium T or L sections 0.125 784.00 98.00
Polyester powder coating 50 microns on aluminium sections Carriage 4309.62
of material 43.10
Stainless steel screws 30 mm x4 mm LABOUR 4352.71
Carpenter 1st class TOTAL 611.56
Add 1 % Water charges on "W" TOTAL 4964.27
Add GST on "X" (multiplying factor 0.1405) TOTAL 744.64
Add 15% CPOH on "Y" TOTAL 5708.91
Add Cess @ 1% on "Z" Cost of 10 nos 57.09
Cost of 1 no 5766.00
Say 576.60
576.60

21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality)
doors including necessary cutting and making good etc.
complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


7001 Detail of cost for 1 nos. MATERIAL each 1.00 195.00 195.00
0111 Brass 100mm mortice latch and lock with 6 levers without pair of day L.S. 0.17 784.00 133.28
9999 handles 3.64 2.12 7.72
LABOUR 336.00
Carpenter 1st class Sundry and screws TOTAL 3.36
Add 1 % Water charges on "W" TOTAL 339.36
Add GST on "X" (multiplying factor 0.1405) TOTAL 47.68
Add 15% CPOH on "Y" TOTAL 387.04
Add Cess @ 1% on "Z" Cost of 1 no 58.06
Say 445.09
4.45
449.54
449.55

21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum ano
grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to
IS: 1285, fixed
with dash fastener of required dia and size (Dash fastener to be paid for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 4.082kg MATERIAL
Aluminium Section
(i) External member of the frame (Jindal section no TU/ 3644)
V = 2x2.00 = 4.00 m H = 2x1.20 = 2.40 m
Total= 6.40 m @ 0.607 kg/m = 3.885kg Angle cleat 38x38x4.8 mm 50
mm long 4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg Total = 4.286kg
Aluminium T or L sections
Chromium plated Brass screws 20 mm Anodising 15 microns on
aluminium sections Carriage of material
LABOUR 814.34
For fabrication of frame Fitter (grade 1) 12.80
Skilled Beldar (for floor rubbing etc.) Beldar 162.87
Bandhani 11.02
Labour for drilling holes, hire charges of drill, electricity charges, 31.36
carriage of dash hold fastners & sundries 28.56
7306 TOTAL 4.286 190.00
12.90
0589 Add 1 % Water charges on "W" TOTAL 0.08 160.00
7.14
7389 Add GST on "X" (multiplying factor 0.1405) TOTAL kilogram 100 4.286 38.00
11.02
9977 Add 15% CPOH on "Y" TOTAL Nos kilogram 5.20 2.12
1092.02
0116 Add Cess @ 1% on "Z" Cost for 4.082 kg L.S. 0.04 784.00
10.92
0139 Cost for 1 kg day day day day 0.04 714.00
1102.94
0114 Say L.S. 0.02 645.00
154.96
0100 0.01 714.00
1257.90
9999 5.20 2.12
188.68
1446.58
14.47
1461.05
357.92
357.90
21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws
21.15.1 Anodized (AC 15) aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


8660 Detail of cost for 10 nos. MATERIAL each 100 Nos 10.00 48.00 480.00
8666 Aluminium casement window fastener (Anodised AC 15) Stainless steel day L.S. 0.40 41.80 16.72
0111 screws 25 mm x4 mm 0.06 784.00 47.04
9977 LABOUR 2.73 2.12 5.79
Carpenter 1st class Carriage of materials TOTAL 549.55
Add 1 % Water charges on "W" TOTAL 5.50
Add GST on "X" (multiplying factor 0.1405) TOTAL 555.04
Add 15% CPOH on "Y" TOTAL 77.98
Add Cess @ 1% on "Z" Cost of 10 nos 633.03
Cost of 1 nos 94.95
Say 727.98
7.28
735.26
73.53
73.55

21.15.2 Powder coated minimum thickness 50 micron aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


8661 Detail of cost for 10 nos. MATERIAL each 100 Nos 10.00 52.64 526.40
8666 Aluminium casement window fastener (powder coated ) Stainless steel day L.S. 0.40 41.80 16.72
0111 screws 25 mm x4 mm 0.06 784.00 47.04
9977 LABOUR 2.73 2.12 5.79
Carpenter 1st class Carriage of materials TOTAL 595.95
Add 1 % Water charges on "W" TOTAL 5.96
Add GST on "X" (multiplying factor 0.1405) TOTAL 601.91
Add 15% CPOH on "Y" TOTAL 84.57
Add Cess @ 1% on "Z" Cost of 10 nos 686.48
Cost of 1 nos 102.97
Say 789.45
7.89
797.34
79.73
79.75

21.15.3 Polyester powder coated minimum thickness 50 micron aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


8662 Detail of cost for 10 nos. each 100 Nos 10.00 51.52 515.20
8666 MATERIAL day L.S. 0.40 41.80 16.72
0111 Aluminium casement window fastener (polyester powder coated) 0.06 784.00 47.04
9977 Stainless steel screws 25 mm x4 mm LABOUR 2.73 2.12 5.79
Carpenter 1st class Carriage of materials TOTAL 584.75
Add 1 % Water charges on "W" TOTAL 5.85
Add GST on "X" (multiplying factor 0.1405) TOTAL 590.60
Add 15% CPOH on "Y" TOTAL 82.98
Add Cess @ 1% on "Z" Cost of 10 nos 673.57
Cost of 1 nos 101.04
Say 774.61
7.75
782.36
78.24
78.25

21.16 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engi
21.16.1 Anodized (AC 15 ) aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


8663 Detail of cost for 10 nos. MATERIAL each 100 Nos 10.00 59.36 593.60
8666 Aluminium round shape handle (anodised AC 15) outer dia 100mm day L.S. 0.40 41.80 16.72
0111 Stainless steel screws 25 mm x4 mm LABOUR 0.06 784.00 47.04
9977 Carpenter 1st class Carriage of materials TOTAL 2.73 2.12 5.79
Add 1 % Water charges on "W" TOTAL 663.15
Add GST on "X" (multiplying factor 0.1405) TOTAL 6.63
Add 15% CPOH on "Y" TOTAL 669.78
Add Cess @ 1% on "Z" Cost of 10 nos 94.10
Cost of 1 nos 763.88
Say 114.58
878.47
8.78
887.25
88.73
88.75

21.16.2 Powder coated minimum thickness 50 micron aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


each 100 Nos 10.00 60.00 600.00
8664 Aluminium round shape handle (powder coated) outer dia 100 mm day L.S. 0.40 41.80 16.72
8666 Stainless steel screws 25 mm x4 mm LABOUR 0.06 784.00 47.04
0111 Carpenter 1st class Carriage of materials TOTAL 2.73 2.12 5.79
9977 Add 1 % Water charges on "W" TOTAL 669.55
Add GST on "X" (multiplying factor 0.1405) TOTAL 6.70
Add 15% CPOH on "Y" TOTAL 676.24
Add Cess @ 1% on "Z" Cost of 10 nos 95.01
Cost of 1 nos 771.26
Say 115.69
886.94
8.87
895.81
89.58
89.60
21.16.3 Polyester powder coated minimum thickness 50 micron aluminium

Code Description Unit Quantity Rate Rs. Amount Rs.


8665 Detail of cost for 10 nos. MATERIAL each 100 Nos 10.00 62.00 620.00
8666 Aluminium round shape handle (polyester powder coated) outer dia 100 day L.S. 0.40 41.80 16.72
0111 mm 0.06 784.00 47.04
9977 Stainless steel screws 25 mm x4 mm LABOUR 2.73 2.12 5.79
Carpenter 1st class Carriage of materials TOTAL 689.55
Add 1 % Water charges on "W" TOTAL 6.90
Add GST on "X" (multiplying factor 0.1405) TOTAL 696.44
Add 15% CPOH on "Y" TOTAL 97.85
Add Cess @ 1% on "Z" Cost of 10 nos 794.29
Cost of 1 nos 119.14
Say 913.44
9.13
922.57
92.26
92.25

21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with mini
coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass
steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing app
anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weig
measured for payment).

Code Description Unit Quantity Rate Rs. Amount Rs.


8774 Details of cost for 10.00 kg MATERIAL kg L.S. 12.00 279.00 3348.00
9977 Anodised aluminium grill = 10.00 kg Add 20% wastage = 2 kg = 12 kg day day day day 11.00 2.12 23.32
0116 Aluminium Grill L.S. 0.50 784.00 392.00
0139 Carriage of materials LABOUR 0.25 714.00 178.50
0114 for fixing 0.25 645.00 161.25
0100 Fitter (grade 1) 0.05 714.00 35.70
9999 Skilled Beldar (for floor rubbing etc.) Beldar 25.00 2.12 53.00
Bandhani Sundries TOTAL 4191.77
Add 1 % Water charges on "W" TOTAL 41.92
Add GST on "X" (multiplying factor 0.1405) TOTAL 4233.69
Add 15% CPOH on "Y" TOTAL 594.83
Add Cess @ 1% on "Z" Cost for 10.00 kg 4828.52
Cost for 1 kg 724.28
Say 5552.80
55.53
5608.33
560.83
560.85

21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including prov
fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required
all complete as
per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


8778 Details of cost for 2.10 sqm sqm L.S. 2.31 1750.00 4042.50
9977 MATERIAL L.S. 8.19 2.12 17.36
9999 Glass= 2.10 Sqm. each 5.33 2.12 11.30
21.4.1 Add Wastage @ 10% = 0.21 sqm. Total= 2.31 sqm. day day L.S. 1.00 2448.85 2448.85
0119 Toughened glass 12 mm thickness Carriage of glass panes and other 0.90 714.00 642.60
0114 materials Methylated spirit 0.90 645.00 580.50
9999 Stainless steel pivot and double acting hydraulic floor spring type fixing 1.13 2.12 2.40
Rate as per Item No.21.4.1 of SH:Aluminium Work LABOUR 7745.51
Glazier Beldar 52.97
Sundries,sush rog cotton etc. TOTAL 7798.47
Add 1 % Water charges on "W-A" TOTAL 751.62
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 8550.10
Add 15% CPOH on "Y-A" TOTAL 915.19
Add Cess @ 1% on "Z-A" Cost for 2.10 sqm 9465.28
Cost for 1 sqm 70.16
Say 9535.45
4540.69
4540.70

21.19 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by pro
weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engin
complete, complying to ASTM C920, DIN 18540-F & ISO 11600
21.19.1 Upto 5 mm depth and 5 mm width

Code Description Unit Quantity Rate Rs. Amount Rs.


2604 Details of cost for 10m length width 5mm & depth 5mm MATERIAL each metre 1.00 543.00 543.00
8654 Weather/structural non sag elastomeric PU sealant (600ml L.S. 20.00 2.18 43.60
9999 Sausage) for joints in RCC/Brick/ Stone/ wood/ Ceramic/ L.S. 26.00 2.12 55.12
9977 Gypsum/Alluminium work complying to ASTM C920, DIN 18540- F & day 8.40 2.12 17.81
0123 ISO 11600 incl all taxes 0.40 784.00 313.60
Masking tape 973.13
Sundries, including charges of Sealant gun machine, dhoti etc 9.73
Carriage of material LABOUR 982.86
Mason (brick layer) 1st class TOTAL 138.09
Add 1 % Water charges on "W" TOTAL 1120.95
Add GST on "X" (multiplying factor 0.1405) TOTAL 168.14
Add 15% CPOH on "Y" TOTAL 1289.09
Add Cess @ 1% on "Z" Cost of 10 metre 12.89
Cost per metre 1301.98
Say 130.20
130.20

21.19.2 Upto 10 mm depth and 10 mm width

Code Description Unit Quantity Rate Rs. Amount Rs.


2604 Details of cost for 10m length, width 10mm & depth 10mm MATERIAL each metre 1.50 543.00 814.50
8654 Weather/structural non sag elastomeric PU sealant (600ml Sausage) L.S. 20.00 2.18 43.60
9999 for joints in RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum/Alluminium L.S. 26.00 2.12 55.12
9977 work complying to ASTM C920, DIN 18540- F & ISO 11600 incl all day 8.40 2.12 17.81
0123 taxes 0.50 784.00 392.00
Masking tape 1323.03
Sundries, including charges of Sealant gun machine, dhoti etc 13.23
Carriage of material LABOUR 1336.26
Mason (brick layer) 1st class TOTAL 187.74
Add 1 % Water charges on "W" TOTAL 1524.00
Add GST on "X" (multiplying factor 0.1405) TOTAL 228.60
Add 15% CPOH on "Y" TOTAL 1752.60
Add Cess @ 1% on "Z" Cost of 10 metre 17.53
Cost per metre 1770.13
Say 177.01
177.00

21.19.3 Upto 20 mm depth and 20 mm width


Code Description Unit Quantity Rate Rs. Amount Rs.
2604 Details of cost for 10m length, width 20mm & depth 20mm MATERIAL each metre 3.00 543.00 1629.00
8654 Weather/structural non sag elastomeric PU sealant (600ml Sausage) metre 20.00 2.18 43.60
2630 for joints in RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum/Alluminium L.S. 10.00 6.00 60.00
9999 work complying to ASTM C920, DIN 18540- F & ISO 11600 incl all L.S. 26.00 2.12 55.12
9977 taxes day 8.40 2.12 17.81
0123 Masking tape Baker rod 0.75 784.00 588.00
Sundries, including charges of Sealant gun machine, dhoti etc 2393.53
Carriage of material LABOUR 23.94
Mason (brick layer) 1st class TOTAL 2417.46
Add 1 % Water charges on "W" TOTAL 339.65
Add GST on "X" (multiplying factor 0.1405) TOTAL 2757.12
Add 15% CPOH on "Y" TOTAL 413.57
Add Cess @ 1% on "Z" Cost of 10 metre 3170.68
Cost per metre 31.71
Say 3202.39
320.24
320.25
SUB HEAD : 22.0
WATER PROOFING
1431
SUB HEAD : 22.0
WATER PROOFING
1431

22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level
ground structures as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 c
mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be
separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
22.1.1 Using rough kota stone.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10.00 sqm
MATERIAL
Ist layer
Cement mortar 1:3 for fixing of stone 10x0.025 = 0.25 cum
3.8 Rate as per Item Number 3.8 of SH: MORTARS cum 0.25 5024.15 1256.04
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
1169 Kotastone slab 25mm thick (rough cheseled) sqm 11.00 250.00 2750.00
Cartage 11x0.025 @ 2330 kg/m3 = 0.64 t
2216 Carriage of Stone blocks white & red sand stone & kota stone
slab tonne 0.64 145.72 93.26
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
Total = 0.28 cum
3.8 Rate as per Item No.3.8 of SH: MORTARS cum 0.28 5024.15 1406.76
for slurry Bed
2x10.00 @ 2kg/m3 = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum
Total = 71.88 kg or 0. 72 t
0367 Portland Cement (OPC-43 grade) tonne 0.072 5000.00 360.00
2209 Carriage of Cement tonne 0.072 145.72 10.49
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal
Cement in slurry = 0.73 quintal
Total = 3.43 quintal @ 1 kg for 50 kg of cement i.e. 6.86 kg
1213 Water proofing materials kilogram 6.86 35.00 240.10
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 0.08 1350.00 108.00
@ 8 cudm/sqm 1x10.3x8x1/1000 = 0.08 cum
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.08 163.93 13.11
Labour for base mortar & kota stone laying i/c slurry job
0125 Mason (for plain stone work) 2nd class day 1.20 714.00 856.80
0114 Beldar day 1.00 645.00 645.00
0115 Coolie day 1.00 645.00 645.00
LABOUR
Labour for top layer & spreading stone grit
0125 Mason (for plain stone work) 2nd class day 1.08 714.00 771.12
0114 Beldar day 1.08 645.00 696.60
0101 Bhisti day 0.45 714.00 321.30
9999 Sundries L.S. 6.24 2.12 13.23
TOTAL 10186.82

Add 1 % Water charges on "W" 101.87


TOTAL 10288.68
Add GST on "X" (multiplying factor 0.1405) 1445.56
TOTAL 11734.24
Add 15% CPOH on "Y" 1760.14
TOTAL 13494.38
Add Cess @ 1% on "Z" 134.94
Cost for 10.00 sqm 13629.32
Cost for 1 sqm 1362.93
Say 1362.95
22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 2
mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm
between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finis
exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing c
recommended proportion complete at all levels and as directed by Engineer-in-charge :
22.2.1 Using rough Kota stone

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10.00 sqm MATERIAL
Ist layer
Kota stone slab = 10 sqm Wastage @ 10% = 1 sqm Total = 11 sqm
Kotastone slab 25mm thick (rough cheseled) Cartage 11x0.025 @ 2330
kg/m3 = 0.64t
Carriage of Stone blocks white & red sand stone & kota stone slab
Cement slurry for jointing 6x3.70 = 22.20 m
1169 7x2.78 = 19.46 m sqm 11.00 250.00 2750.00
2216 =41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap 10x0.02 = 0.200 cum
= 0.213 cum @ 1440 kg/cum = 306.70 kg or 0.307 t Portland Cement tonne 0.64 145.72 93.26
(OPC-43 grade)
Carriage of Cement
Cement plaster 1:3 with neat cement punning Rate as per item no
13.9.2 of SH : Finishing Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm = 136.20 kg Total = 446.20 kg
@ 1 kg for 50 kg of cement i.e. 8.90 kg Water proofing materials
LABOUR
Fixing of Kota stone and applying cement slurry. Mason (for plain stone
0367 work) 2nd class tonne 0.31 5000.00 1550.00
2209 Beldar Coolie tonne 0.31 145.72 45.17
13.9.2 Sundries and scaffolding TOTAL sqm 10.00 507.85 5078.50
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 10.00sqm
Cost for 1 sqm
1213 Say kilogram 8.90 35.00 311.50

0125 day 3.00 714.00 2142.00

0114 day 3.00 645.00 1935.00


0115 day 1.00 645.00 645.00
9999 L.S. 18.20 2.12 38.58
14589.02
95.11
14684.12
1349.59
16033.71
1643.28
17677.00
125.98
17802.98
1780.30
1780.30
22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and th
consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proport
including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion in
rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitu
kg/sqm).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm
MATERIAL
Cement slurry @ 4.4 kg/sqm = 44.00 kg or 0.044 t
0367 Portland Cement (OPC-43 grade) tonne 0.044 5000.00 220.00
2209 Carriage of Cement tonne 0.044 145.72 6.41
MATERIAL
Cement plaster 1:3 (20 mm thick)
3.8 Rate as per Item No.3.8 of SH: MORTARS cum 0.224 5024.15 1125.41
LABOUR
0155 Mason (average) day 0.94 749.00 704.06
0115 Coolie day 1.02 645.00 657.90
0101 Bhisti day 1.10 714.00 785.40
9999 Scafolding and sundries L.S. 12.61 2.12 26.73
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.017 34790.00 591.43
= 10x1.70= 17 kg = 0.017 t
2211 Carriage of Tar bitumen tonne 0.017 163.93 2.79
3002 Polyvinyle chloride sheet 400 micron thick sqm 10.00 45.00 450.00
9977 CARRIAGE L.S. 13.00 2.12 27.56
1213 Water proofing materials kilogram 3.60 35.00 126.00
@ 1 kg per 50 kg of cement used Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg Total = 180.2 kg/50 = 3.60 kg
LABOUR
0131 Painter day 0.20 714.00 142.80
0114 Beldar day 1.33 645.00 857.85
0130 Mistry day 0.06 784.00 47.04
9999 Sundries L.S. 7.28 2.12 15.43
TOTAL 5786.81
Add 1 % Water charges on "W" 57.87
TOTAL 5844.68
Add GST on "X" (multiplying factor 0.1405) 821.18
TOTAL 6665.86
Add 15% CPOH on "Y" 999.88
TOTAL 7665.74
Add Cess @ 1% on "Z" 76.66
Cost for 10 sqm 7742.40
Cost for 1 sqm 774.24
Say 774.25
22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between
members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm
thick) metre 100.00 200.00 20000.00
LABOUR
0114 Beldar day 2.00 645.00 1290.00
9999 Sundries & wire etc. L.S. 26.00 2.12 55.12
TOTAL 21345.12
Add 1 % Water charges on "W" 213.45
TOTAL 21558.57
Add GST on "X" (multiplying factor 0.1405) 3028.98
TOTAL 24587.55
Add 15% CPOH on "Y" 3688.13
TOTAL 28275.68
Add Cess @ 1% on "Z" 282.76
Cost for 100 metres 28558.44
Cost for 1 metre 285.58
Say 285.60

22.4.2 Dumb bell with central bulb (180 mm wide, 8 mm thick)


Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 100 metres
MATERIAL
7428 Water stops Dumb bell with central bulb metre 100.00 160.00 16000.00
LABOUR
0114 Beldar day 2.00 645.00 1290.00
9999 Sundries & wire etc. L.S. 26.00 2.12 55.12
TOTAL 17345.12
Add 1 % Water charges on "W" 173.45
TOTAL 17518.57
Add GST on "X" (multiplying factor 0.1405) 2461.36
TOTAL 19979.93
Add 15% CPOH on "Y" 2996.99
TOTAL 22976.92
Add Cess @ 1% on "Z" 229.77
Cost for 100 metres 23206.69
Cost for 1 metre 232.07
Say 232.05

22.4.3 Kickers (320 mm wide, 5 mm thick)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 100 metres
MATERIAL
7429 Kickers metre 100.00 160.00 16000.00
LABOUR
0114 Beldar day 2.00 645.00 1290.00
9999 Sundries & wire etc. L.S. 26.00 2.12 55.12
TOTAL 17345.12
Add 1 % Water charges on "W" 173.45
TOTAL 17518.57
Add GST on "X" (multiplying factor 0.1405) 2461.36
TOTAL 19979.93
Add 15% CPOH on "Y" 2996.99
TOTAL 22976.92
Add Cess @ 1% on "Z" 229.77
Cost for 100 metres 23206.69
Cost for 1 metre 232.07
Say 232.05
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with
cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed
4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @
0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with poly
slurry.
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of cost for 10 sqm
Cement 10x(0.488+0.242) = 7.30 kg
Sealing fillets 10x0.5 kg / sqm = 5.00 kg
Total = 12.30 kg = 0.012 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.012 5000.00 60.00
2209 Carriage of Cement tonne 0.012 145.72 1.75
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type) 10x(0.25+0.126) = 3.79 kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg
Wastage @ 5% on 4.79 kg = 0.24 kg
Total = 5.03 kg Say 5.00 kg
8501 Polymer modified cementation coating kilogram 5.00 160.00 800.00
LABOUR
0155 Mason (average) day 2.00 749.00 1498.00
0114 Beldar day 2.00 645.00 1290.00
0101 Bhisti day 0.25 714.00 178.50
9999 Sundries, brushes etc L.S. 15.60 2.12 33.07
TOTAL 3861.32
Add 1 % Water charges on "W" 38.61
TOTAL 3899.93
Add GST on "X" (multiplying factor 0.1405) 547.94
TOTAL 4447.87
Add 15% CPOH on "Y" 667.18
TOTAL 5115.06
Add Cess @ 1% on "Z" 51.15
Cost for 10 sqm 5166.21
Cost for 1 sqm 516.62
Say 516.60
22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement c
consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/
coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be
cm
on parapet wall and tucked into groove in parapet all around.

(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement
treated surface will be measured.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10 sqm
MATERIAL
Cement 10x(1.289+0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
Total = 19.54kg = 0.020 tonne
0367 Portland Cement (OPC-43 grade) tonne 0.02 5000.00 100.00
2209 Carriage of Cement tonne 0.02 145.72 2.91
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type) 10x(0.253+0.67) = 9.23 kg
Wastage @ 5% = 0.46 kg
Total = 9.69 kg
8501 Polymer modified cementation coating kilogram 9.69 160.00 1550.40
Fibre Glass cloth = 10.00 sqm
Wastage @ 10 % = 1.00 sqm
Total = 11.00 sqm
8502 Fibre glass cloth sqm 11.00 32.00 352.00
LABOUR
0155 Mason (average) day 2.00 749.00 1498.00
0114 Beldar day 1.00 645.00 645.00
0101 Bhisti day 0.25 714.00 178.50
9999 Sundries, brushes etc L.S. 23.40 2.12 49.61
TOTAL 4376.42
Add 1 % Water charges on "W" 43.76
TOTAL 4420.19
Add GST on "X" (multiplying factor 0.1405) 621.04
TOTAL 5041.22
Add 15% CPOH on "Y" 756.18
TOTAL 5797.41
Add Cess @ 1% on "Z" 57.97
Cost for 10 sqm 5855.38
Cost for 1 sqm 585.54
Say 585.55
22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatmen
balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and a
Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse
with water proofing compound conforming to IS
: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with wa
compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300
including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing com
conforming to IS : 2645 and approved by Engineer-in- charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compo
conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and
finishing the
surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above oper
done in order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm
i) Cement slury
0367 Portland Cement (OPC-43 grade) tonne 0.0275 5000.00 137.50
ii) Cement mortar 1:5 (1 cement: 5 coarsesand)
3.10 Rate as per Item No.3.10 of SH:Mortars cum 0.224 3995.00 894.88
iii) Roof treatment with brick bat and cement mortar
MATERIAL
0285 Brick Aggregate (Single size) : 63 mm cum 0.94 650.00 611.00
2260 Carriage of Brick aggregate cum 0.94 178.19 167.50
Cement mortar 1:5
3.10 Rate as per Item No.3.10 of SH:Mortars cum 0.50 3995.00 1997.50
LABOUR
0114 Beldar day 1.75 645.00 1128.75
0101 Bhisti day 0.28 714.00 199.92
0123 Mason (brick layer) 1st class day 0.05 784.00 39.20
0124 Mason (brick layer) 2nd class day 0.05 714.00 35.70
0128 Mate day 0.04 714.00 28.56
Extra labour for ramming
0114 Beldar day 0.25 645.00 161.25
9999 Sundries L.S. 13.65 2.12 28.94
iv) Cement slury
0367 Portland Cement (OPC-43 grade) tonne 0.0275 5000.00 137.50
0114 Beldar day 0.20 645.00 129.00
v) 20 mm cement plaster 1:4 (1 cement : 4 coarse sand)
13.6.1 Rate as per item no 13.6.1 of SH : Finishing sqm 10.00 421.40 4214.00
vi) Water proofing compound
vi) Water proofing compound
27.50+27.50+69.40+124.00 = 248.40 kg @
1 kg per bag of cement
1213 Water proofing materials kilogram 5.00 35.00 175.00
Extra for making chequers for 10 sqm
7233 Fibre glass tissue reinforcement Type II Grade I sqm 10.50 75.00 787.50
0124 Mason (brick layer) 2nd class day 0.36 714.00 257.04
0114 Beldar day 0.36 645.00 232.20
9999 Chequer plate L.S. 13.65 2.12 28.94
Add labour for laying 20 mm bed mortar
0124 Mason (brick layer) 2nd class day 0.54 714.00 385.56
0114 Beldar day 0.54 645.00 348.30
0101 Bhisti day 0.45 714.00 321.30
TOTAL 12447.03
Add 1 % Water charges on "W-A" 82.33
TOTAL 12529.36
Add GST on "X-A" (multiplying factor 0.1405) 1168.31
TOTAL 13697.67
Add 15% CPOH on "Y-A" 1422.55
TOTAL 15120.22
Add Cess @ 1% on "Z-A" 109.06
Cost for 10 sqm 15229.29
Cost for one sqm 1522.93
Say 1522.95

22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses o
bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt
(hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubi
per square metre, including preparation of surface but excluding grading complete with :

22.8.1 Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 sqm
Blown or / and residual bitumen applied hot = 2x1.45x30 = 87 kg
Blown type petroleum bitumen of penetration 85/25 of approved quality
Hession felt type 3 Grade I (hessian base self finished bitumen felt) =
0313 30sqm + Add for over lapping @ 10% = 3 sqm. Total = 33 Sqm
Bitumen felt :Type 3 grade 1 tonne 0.087 34790.00 3026.73
Stone grit 6 mm and down size or pea sized gravel 30x6=180 cudm
Carriage of Stone aggregate below 40 mm nominal size Carriage of Tar
bitumen
0322 0.087tx2.7x.001x33=0.162t sqm 33.00 70.00 2310.00
Coal (steam)
1177 = 2 quintals/t of bitumen i.e. 2x0.087 =0.174q Carriage of steam coal cum 0.18 800.00 144.00
Praparing roof surface, sutting groove and making good etc. LABOUR
2202 Painter Beldar Mistry cum 0.18 163.93 29.51
2211 Sundries, brushes etc. TOTAL tonne 0.162 163.93 26.56
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
Coal (steam)
= 2 quintals/t of bitumen i.e. 2x0.087 =0.174q Carriage of steam coal
Praparing roof surface, sutting groove and making good etc. LABOUR
Painter Beldar Mistry
Sundries, brushes etc. TOTAL
Add 1 % Water charges on "W" TOTAL
0370 Add GST on "X" (multiplying factor 0.1405) TOTAL quintal 0.174 440.00 76.56
Add 15% CPOH on "Y" TOTAL
2200 Add Cess @ 1% on "Z" Cost of 30.00 Sqm. tonne 0.0174 187.35 3.26
Cost of 1.00 Sqm.
9999 Say L.S. 134.55 2.12 285.25
0131 day 2.16 714.00 1542.24
0114 day 3.24 645.00 2089.80
0130 day 0.18 784.00 141.12
9999 L.S. 6.76 2.12 14.33
9689.35
96.89
9786.24
1374.97
11161.21
1674.18
12835.39
128.35
12963.75
432.12
432.10
22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course
bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45,
1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hes
self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm
preparation of surface but excluding grading, complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 30 sqm
Blown or / and residual bitumen applied hot
(1.45+1.20+1.45)x30=123kg
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 0.123 34790.00 4279.17
Bitumen felt Type 3 grade 1 (hessian base self finished bitumen
felt) = 60 sqm.+ Add for over lapping @ 10% = 6 sqm. Total
=66 Sqm
0322 Bitumen felt :Type 3 grade 1 sqm 66.00 70.00 4620.00
2211 Carriage of Tar bitumen tonne 0.273 163.93 44.75
0.123t+2.7x.001x66=0.273t
1177 Stone grit 6 mm and down size or pea sized gravel cum 0.18 800.00 144.00
30x6=180cudm
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.18 163.93 29.51
0370 Coal (steam) quintal 0.246 440.00 108.24
= 2 quintals/t of bitumen i.e. 2x0.123=0.246q
2200 Carriage of steam coal tonne 0.0246 187.35 4.61
9999 Praparing roof surface, sutting groove and making good etc. L.S. 134.55 2.12 285.25
LABOUR
0131 Painter day 3.24 714.00 2313.36
0114 Beldar day 4.86 645.00 3134.70
0130 Mistry day 0.2 784.00 156.80
9999 Sundries, brushes etc. L.S. 6.76 2.12 14.33
TOTAL 15134.72
Add 1 % Water charges on "W" 151.35
TOTAL 15286.06
Add GST on "X" (multiplying factor 0.1405) 2147.69
TOTAL 17433.76
Add 15% CPOH on "Y" 2615.06
TOTAL 20048.82
Add Cess @ 1% on "Z" 200.49
Cost of 30.00 Sqm. 20249.31
Cost of 1.00 Sqm. 674.98
Say 675.00
22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course
and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt t
(fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimete
including preparation of surface, excluding grading, compete.

Code Description Unit Quantity Rate Rs. Amount Rs.


0313 Details of cost for 30 sqm Blown bitumen applied hot tonne 0.1305 34790.00 4540.10
0318 (1.45+1.20+1.70)x30 = 130.5 kg. sqm tonne 66.00 70.00 4620.00
2211 Blown type petroleum bitumen of penetration 85/25 of approved quality cum 0.275 163.93 45.08
1177 Bitumen felt type B grade I (fibre base self finished bitumen felt) 0.18 800.00 144.00
= 60 sqm. + Add for over lapping @ 10% = 6 sqm. Total =66 Sqm
Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 Carriage
of Tar bitumen
(0.131 t+2.22x.001x66 = 0.275t)
Stone grit 6 mm and down size or pea sized gravel 30x6=180cudm
CARRIAGE:

2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.18 163.93 29.51
0370 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. 0.1305=0.261q quintal tonne 0.261 440.00 114.84
2200 Coal (steam) L.S. 0.0261 187.35 4.89
9999 Carriage of steam coal day day day 134.55 2.12 285.25
0131 Praparing roof surface, sutting groove and making good etc. LABOUR L.S. 4.32 714.00 3084.48
0114 Painter Beldar Mistry 6.48 645.00 4179.60
0130 Sundries, brushes etc. TOTAL 0.36 784.00 282.24
9999 Add 1 % Water charges on "W" TOTAL 6.76 2.12 14.33
Add GST on "X" (multiplying factor 0.1405) TOTAL 17344.31
Add 15% CPOH on "Y" TOTAL 173.44
Add Cess @ 1% on "Z" Cost of 30.00 Sqm. 17517.75
Cost of 1.00 Sqm. 2461.24
Say 19979.00
2996.85
22975.85
229.76
23205.61
773.52
773.50

22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course
and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt t
(glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubi
per sqm including preparation of surface but excluding grading,
complete.

Code Description Unit Quantity Rate Rs. Amount Rs.


0313 Detail of cost for 30 sqm tonne 0.1305 34790.00 4540.10
0318 Blown or / and residual bitumen applied hot (1.45+1.20+1.70)x30 sqm tonne 66.00 70.00 4620.00
2211 =130.5 kg. cum cum 0.334 163.93 54.75
1177 Blown type petroleum bitumen of penetration 85/25 of approved quality quintal tonne 0.18 800.00 144.00
2202 Bitumen felt as per IS 7193 Grade II (fibre base self finished bitumen L.S. 0.18 163.93 29.51
0370 felt) = 60 sqm. + Add for over lapping @ 10% = 6 sqm. Total =66 Sqm day day day 0.261 440.00 114.84
2200 Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I L.S. 0.0261 187.35 4.89
9999 Carriage of Tar bitumen (0.131t+3.08x.001x66=334t.) 134.55 2.12 285.25
0131 Stone grit 6 mm and down size or pea sized gravel 30x6=180cudm 4.32 714.00 3084.48
0114 Carriage of Stone aggregate below 40 mm nominal size Fuel (Steam 6.48 645.00 4179.60
0130 coal) = 2 quintals/t of bitumen 0.36 784.00 282.24
9999 i.e. 2x0.1305=0.261q 6.76 2.12 14.33
Coal (steam) 17353.98
Carriage of steam coal 173.54
Praparing roof surface, sutting groove and making good etc. LABOUR 17527.52
Painter Beldar Mistry 2462.62
Sundries, brushes etc. TOTAL 19990.14
Add 1 % Water charges on "W" TOTAL 2998.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 22988.66
Add 15% CPOH on "Y" TOTAL 229.89
Add Cess @ 1% on "Z" Cost of 30.00 Sqm. 23218.55
Cost of 1.00 Sqm. 773.95
Say 773.95

22.12 Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


0316 Details of cost for 10 sq. metres litre L.S. 2.40 47.00 112.80
9977 MATERIAL day day 1.43 2.12 3.03
0131 Bitumen solution primer of approved quality CARRIAGE L.S. 0.17 714.00 121.38
0114 LABOUR 0.17 645.00 109.65
9999 Painter Beldar 13.52 2.12 28.66
Sundries brushes etc. TOTAL 375.52
Add 1 % Water charges on "W" TOTAL 3.76
Add GST on "X" (multiplying factor 0.1405) TOTAL 379.28
Add 15% CPOH on "Y" TOTAL 53.29
Add Cess @ 1% on "Z" Cost of 10.00 Sqm. 432.57
Cost of 1.00 Sqm. 64.89
Say 497.45
4.97
502.43
50.24
50.25

22.13 Deduct for omitting in water proofing treatment final course of spreading stone grit 6 mm down size or pea sized gravel :
22.13.1 at 6 cudm per sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


1177 Details of cost for 10 sqm. MATERIAL cum 0.06 800.00 48.00
2202 Stone grit 6 mm and down size or pea sized gravel 6x10 = 60 cudm cum L.S. 0.06 163.93 9.84
9999 Carriage of Stone aggregate below 40 mm nominal size Labour for L.S. 21.58 2.12 45.75
9999 screening and spreading grit 6.76 2.12 14.33
Sundries TOTAL 117.92
Add 1 % Water charges on "W" TOTAL 1.18
Add GST on "X" (multiplying factor 0.1405) TOTAL 119.10
Add 15% CPOH on "Y" TOTAL 16.73
Add Cess @ 1% on "Z" Cost of 10.00 Sqm. 135.83
Cost of 1.00 Sqm. 20.37
Say 156.20
1.56
157.77
15.78
15.80

22.13.2 at 8 cudm per sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


1177 Details of cost for 10 sqm. MATERIAL cum 0.08 800.00 64.00
2202 Stone grit 8 mm and down size or pea sized gravel 8x10 = 80 cudm cum L.S. 0.08 163.93 13.11
9999 Carriage of Stone aggregate below 40 mm nominal size Labour for L.S. 26.91 2.12 57.05
9999 screening and spreading grit 6.76 2.12 14.33
Sundries TOTAL 148.49
Add 1 % Water charges on "W" TOTAL 1.48
Add GST on "X" (multiplying factor 0.1405) TOTAL 149.98
Add 15% CPOH on "Y" TOTAL 21.07
Add Cess @ 1% on "Z" Cost of 10.00 Sqm. 171.05
Cost of 1.00 Sqm. 25.66
Say 196.71
1.97
198.68
19.87
19.85

22.14 Grading roof for water proofing treatment with


22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code Description Unit Quantity Rate Rs. Amount Rs.


0295 Details of cost for one cum. cum cum 0.67 1400.00 938.00
0297 Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate cum cum 0.22 1350.00 297.00
2202 (Single size) : 10 mm nominal size Carriage of Stone aggregate below cum tonne 0.89 163.93 145.90
0982 40 mm nominal size Coarse sand (zone III) tonne 0.45 1500.00 675.00
2203 Carriage of Coarse sand Portland Cement (OPC-43 grade) Carriage of day day day 0.45 163.93 73.77
0367 Cement L.S. 0.32 5000.00 1600.00
2209 LABOUR day day 0.32 145.72 46.63
0114 Beldar Bhisti L.S. 1.63 645.00 1051.35
0101 Mason (brick layer) 1st class Sundries, brushes etc. 0.70 714.00 499.80
0123 Hire charges of Concrete Mixer 0.25 to 0.40 cum with hooper 0.10 784.00 78.40
9999 Vibrator (Needle type 40 mm) Sundries for laying in terrace TOTAL 14.30 2.12 30.32
0002 Add 1 % Water charges on "W" TOTAL 0.07 800.00 56.00
0012 Add GST on "X" (multiplying factor 0.1405) TOTAL 0.07 350.00 24.50
9999 Add 15% CPOH on "Y" TOTAL 45.76 2.12 97.01
Add Cess @ 1% on "Z" Cost of one cum 5613.67
Say 56.14
5669.81
796.61
6466.42
969.96
7436.38
74.36
7510.75
7510.75

22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


3.8 Details of cost for one cum. MATERIAL cum 1.00 5024.15 5024.15
0155 Cement mortar 1:3 day day day day 1.00 749.00 749.00
0114 Rate as per Item No.3.8 of SH:Mortars LABOUR L.S. 2.00 645.00 1290.00
0101 Mason (average) Beldar 0.50 714.00 357.00
0115 Bhisti Coolie Sundries TOTAL 5.00 645.00 3225.00
9999 Add 1 % Water charges on "W" TOTAL 11.70 2.12 24.80
Add GST on "X" (multiplying factor 0.1405) TOTAL 10669.95
Add 15% CPOH on "Y" TOTAL 106.70
Add Cess @ 1% on "Z" Cost of one cum 10776.65
Say 1514.12
12290.77
1843.62
14134.39
141.34
14275.73
14275.75

22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for one cum. MATERIAL
Cement mortar 1:4
Rate as per Item Number 3.9 of SH: Mortars LABOUR
3.9 Mason (average) Beldar 1.00 4355.20 4355.20
0155 Bhisti 1.00 749.00 749.00
Coolie cum
0114 2.00 645.00 1290.00
day day day day
0101 0.50 714.00 357.00
0115 5.00 645.00 3225.00
9999 Sundries TOTAL L.S. 10.79 2.12 22.87
Add 1 % Water charges on "W" TOTAL 9999.07
Add GST on "X" (multiplying factor 0.1405) TOTAL 99.99
Add 15% CPOH on "Y" TOTAL 10099.07
Add Cess @ 1% on "Z" Cost of one cum 1418.92
Say 11517.98
1727.70
13245.68
132.46
13378.14
13378.15

22.22 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining
reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the
truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as re
by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in A
2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hy
pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all com
specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against
any leakage.

Code Description Unit Quantity Rate Rs. Amount Rs.


0352 Details of cost for 1 kg MATERIAL : kg L.S. 1.00 230.00 230.00
9999 Integral crystalline admixture LABOUR : L.S. 5.80 2.12 12.30
9999 For measuring, making and mixing etc.. Sundries L.S. 1.15 2.12 2.44
9999 Carriage of material and tools cost etc.. TOTAL 1.75 2.12 3.71
Add 1 % Water charges on "W" TOTAL 248.44
Add GST on "X" (multiplying factor 0.1405) TOTAL 2.48
Add 15% CPOH on "Y" TOTAL 250.93
Add Cess @ 1% on "Z" Cost for 1.00 Kg 35.26
Say 286.18
42.93
329.11
3.29
332.40
332.40

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having S
Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterp
(dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of com
22.22A application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the s
remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8511 Details of cost for 10 Sqm MATERIAL litre L.S. 11.30 230.00 2599.00
9977 Fibre reinforced elastomeric liquid water proofing membrane day day L.S. 1.43 2.12 3.03
0115 10.76 litre + 0.538 (Add wastage 5%) = 11.30 litre Carriage of materials L.S. 0.67 645.00 432.15
0131 LABOUR 0.67 714.00 478.38
9999 Coolie Painter 6.76 2.12 14.33
9999 Wire brush brushes, rollers etc. 8.06 2.12 17.09
Sundries

TOTAL 3543.98
Add 1 % Water charges on "W" TOTAL 35.44
Add GST on "X" (multiplying factor 0.1405) TOTAL 3579.42
Add 15% CPOH on "Y" TOTAL 502.91
Add Cess @ 1% on "Z" Cost of 10 sqm 4082.33
Cost of 1 sqm 612.35
Say 4694.68
46.95
4741.62
474.16
474.15

22.23 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures lik
walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.,
mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry
for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet th
as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048
to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. Th
be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee
against any leakage.
22.23.1 For vertical surface two coats @ 0.70 kg per sqm

Code Description Unit Quantity Rate Rs. Amount Rs.


0351 Details of cost for 1 sqm kg 1.40 195.00 273.00
9999 MATERIAL : L.S. 11.55 2.12 24.49
9999 Integral crystalline slurry L.S. 1.15 2.12 2.44
9999 (2 x .70kg / sq.mtr. = 1.40kg) LABOUR L.S. 1.75 2.12 3.71
For application of waterproofing material Sundries 303.63
Carriage of material and tools cost etc.. TOTAL 3.04
Add 1 % Water charges on "W" TOTAL 306.67
Add GST on "X" (multiplying factor 0.1405) TOTAL 43.09
Add 15% CPOH on "Y" TOTAL 349.76
Add Cess @ 1% on "Z" Cost for 1.00 sqm 52.46
Say 402.22
4.02
406.24
406.25

22.23.2 For horizontal surface one coat @1.10 kg per sqm.

Code Description Unit Quantity Rate Rs. Amount Rs.


0351 Details of cost for 1 sqm kilogram 1.10 195.00 214.50
9999 MATERIAL : L.S. 5.75 2.12 12.19
9999 Integral crystalline slurry L.S. 1.15 2.12 2.44
9999 (1 x 1.10kg / sq.mtr. = 1.10kg) LABOUR : L.S. 1.75 2.12 3.71
For application of waterproofing material Sundries 232.84
Carriage of material and tools cost etc.. TOTAL 2.33
Add 1 % Water charges on "W" TOTAL 235.17
Add GST on "X" (multiplying factor 0.1405) TOTAL 33.04
Add 15% CPOH on "Y" TOTAL 268.21
Add Cess @ 1% on "Z" Cost for 1.00 sqm 40.23
Say 308.44
3.08
311.52
311.50

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing
interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polyme
22.23A water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after sc
properly cleaning the surface to remove pre-existing paint film & loose particles till
plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8512 Details of cost for 10 Sqm MATERIAL kg L.S. 15.07 225.00 3390.75
9977 Cementitious water proofing coating with elastic polymers day day L.S. 1.56 2.12 3.31
0115 14.35 kg + 0.72 (Add wastage 5%) = 15.07 litre Carriage of materials L.S. 0.23 645.00 148.35
0131 LABOUR 0.46 714.00 328.44
9999 Coolie Painter 7.15 2.12 15.16
9999 Wire brush brushes, rollers etc. Sundries 8.06 2.12 17.09
TOTAL 3903.09
Add 1 % Water charges on "W" TOTAL 39.03
Add GST on "X" (multiplying factor 0.1405) TOTAL 3942.12
Add 15% CPOH on "Y" TOTAL 553.87
Add Cess @ 1% on "Z" Cost of 10 sqm 4495.99
Cost of 1 sqm 674.40
Say 5170.39
51.70
5222.09
522.21
522.20

22.24 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structur
basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sp
@0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The mate
the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete a
and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry-shake shall be capable of self-healing of cracks up to a wi
The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall c
for 10 years
against any leakage.

Code Description Unit Quantity Rate Rs. Amount Rs.


0354 Details of cost for 1 sqm MATERIAL : kilogram L.S. 0.60 280.00 168.00
9999 Integral crystalline dry shake LABOUR L.S. 11.55 2.12 24.49
9999 For measuring and sprinkling of waterproofing material Sundries L.S. 1.15 2.12 2.44
9999 Carriage of material and tools cost etc.. TOTAL 1.75 2.12 3.71
Add 1 % Water charges on "W" TOTAL 198.63
Add GST on "X" (multiplying factor 0.1405) TOTAL 1.99
Add 15% CPOH on "Y" TOTAL 200.62
Add Cess @ 1% on "Z" Cost for 1.00 sqm 28.19
Say 228.81
34.32
263.13
2.63
265.76
265.75

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and
properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after
22.24A properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acryli
exterior paint with Silicone additives of required shade by two or more coats @ 1.43
litres/10 sqm, complete as the direction of Engineer -in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8513 Details of cost for 10 Sqm MATERIAL kg 45.19 42.00 1897.98
13.112.1 Acrylic modified resin based texture sqm L.S. 10.00 108.60 1086.00
9977 43.04 kg + 2.15 (Add wastage 5%) = 45.19 kg Quantity taken for cost day day L.S. 3.90 2.12 8.27
0115 using once = 10 sqm 0.56 645.00 361.20
0123 Top coat with premium acrylic exterior paint (two or more coats) 0.56 784.00 439.04
9999 Rate as per Item No.13.112.1 of SH:Finishing Carriage of materials 40.00 2.12 84.80
LABOUR 3877.29
Coolie 27.91
Mason (brick layer) 1st class Sundries and scaffolding TOTAL 3905.20
Add 1 % Water charges on "W-A" TOTAL 396.10
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 4301.30
Add 15% CPOH on "Y-A" TOTAL 482.29
Add Cess @ 1% on "Z-A" Cost of 10 sqm 4783.59
Cost of 1 sqm 36.98
Say 4820.57
482.06
482.05
22.25 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the trea
construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, b
to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ≥45 MPa and adhesiv
strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The
performance shall carry guarantee for 10 years against any leakage.
22.25.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area w
crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/runni
Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre
per coat.

Code Description Unit Quantity Rate Rs. Amount Rs.


0353 Details of cost for 1.00 meter kilogram 1.50 190.00 285.00
0351 MATERIAL : kilogram 0.150 195.00 29.25
9999 Crystalline Mortar @1.50 kg per meter L.S. 14.450 2.12 30.63
9999 Integral crystalline slurry for priming and finishing (3 x 0.05kg / meter) = L.S. 1.150 2.12 2.44
9999 0.15kg L.S. 1.750 2.12 3.71
LABOUR 351.03
For making crystalline mortar and repair work etc.. Sundries 3.51
Carriage of material and tools cost etc.. TOTAL 354.54
Add 1 % Water charges on "W" TOTAL 49.81
Add GST on "X" (multiplying factor 0.1405) TOTAL 404.36
Add 15% CPOH on "Y" 60.65
TOTAL 465.01

Add Cess @ 1% on "Z" Cost for 1.00 meter 4.65


Say 469.66
469.65

22.25.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @0.070kg/s

Code Description Unit Quantity Rate Rs. Amount Rs.


0353 kilogram
Details of cost for 1 no. hole MATERIAL :Crystalline [email protected] L.S. hole LABOURFor
kg per 0.04 190.00crystalline mortar
making 7.60 an
9999 L.S. 2.90 2.12 6.15
9999 L.S. 0.30 2.12 0.64
9999 0.25 2.12 0.53
14.91
0.15
15.06
2.12
17.18
2.58
19.76
0.20
19.95
19.95
22.26 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for constructi
treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc
cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre
running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per sp
the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any
leakage.

Code Description Unit Quantity Rate Rs. Amount Rs.


0355 Details of cost for 1.00 meter MATERIAL : metre Litre 1.00 325.00 325.00
0356 Swellable type water stop tape (Crystalline sealing compound) L.S. 0.016 1300.00 20.80
9999 Swellable type water stop primer (@3.78 litre per 240 running meter) L.S. 8.65 2.12 18.34
9999 LABOUR L.S. 1.15 2.12 2.44
9999 For application of primer and swellable water stop Sundries 1.75 2.12 3.71
Carriage of material and tools cost etc.. TOTAL 370.29
Add 1 % Water charges on "W" TOTAL 3.70
Add GST on "X" (multiplying factor 0.1405) TOTAL 373.99
Add 15% CPOH on "Y" TOTAL 52.55
Add Cess @ 1% on "Z" Cost for 1.00 metre 426.53
Say 63.98
490.51
4.91
495.42
495.40
SUB HEAD : 23.0
RAIN WATER HARVESTING & TUBEWEL
1451
23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part
collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of
equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 met
below ground level.
23.1.1 All types of soil
23.1.1.1 300 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 35 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator & security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 35 metre
Cost of 1 metre
Say
23.1.1.2 350 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 32 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator & security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 32 metre
Cost of 1 metre
Say

23.1.1.3 400 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 25 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator & security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 25 metre
Cost of 1 metre
Say

23.1.2 Rocky strata including Boulders


23.1.2.1 300 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 16 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.90 7000.00
1235 Diesel oil litre 6.00 80.87
Extra diesel required for boring in rocky strata
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator & security
0134 Rock Hole Driller day 0.75 645.00
0114 Beldar day 3.00 645.00
0103 Blacksmith 2nd class day 0.75 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 16 metre
Cost of 1 metre
Say

23.1.2.2 350 mm dia


Code Description Unit Quantity Rate Rs.
Details of cost for 16 metre
0020 MACHINERY : day litre 0.90 7000.00
1235 Hydraulic Excavator (3D) with driver and fuel. Diesel oil day 8.00 80.87
0005 Extra diesel required for boring in rockystrata Hire charges of 0.4286 3940.00
Diesel Truck - 9 tonne Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140 Loading,
unloading &Errection charges of drilling Rig Machine
LABOUR

0114 Beldar day 4.00 645.00


0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0134 Rock Hole Driller day 1.00 645.00
0114 Beldar day 4.00 645.00
0103 Blacksmith 2nd class day 0.75 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 16 metre
Cost of 1 metre
Say

23.1.2.3 400 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 16 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.90 7000.00
1235 Diesel oil litre 16.00 80.87
Extra diesel required for boring in rockystrata
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0134 Rock Hole Driller day 1.20 645.00
0114 Beldar day 8.00 645.00
0103 Blacksmith 2nd class day 0.75 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 16 metre
Cost of 1 metre
Say
23.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part
collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of
equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90
150 metre depth below ground level.
23.2.1 All types of soil

23.2.1.1 300 mm dia


Code Description Unit Quantity Rate Rs.
Details of cost for 30 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 30 metre
Cost of 1 metre
Say

23.2.1.2 350 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 27 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 27 metre
Cost of 1 metre
Say
23.2.1.3 400 mm dia
Code Description Unit Quantity Rate Rs.
Details of cost for 20 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 1.00 7000.00
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0114 Beldar day 2.00 645.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 20 metre
Cost of 1 metre
Say

23.2.2 Rocky strata including Boulders


23.2.2.1 300 mm dia

Code Description Unit Quantity Rate Rs.


Details of cost for 16 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.90 7000.00
1235 Diesel oil litre 10.00 80.87
Extra diesel required for boring in rockystrata
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site (assume
140m of bore for one shifting) (2 x30)/140Loading,
unloading &Errection charges of drilling Rig Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0134 Rock Hole Driller day 1.00 645.00
0114 Beldar day 5.00 645.00
0103 Blacksmith 2nd class day 0.70 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 16 metre
Cost of 1 metre
Say
23.2.2.2 350 mm dia
Code Description Unit Quantity Rate Rs.
Details of cost for 16 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.90 7000.00
1235 Diesel oil litre 12.00 80.87
Extra diesel required for boring in rockystrata
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0134 Rock Hole Driller day 1.00 645.00
0114 Beldar day 6.00 645.00
0103 Blacksmith 2nd class day 0.75 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 16 metre
Cost of 1 metre
Say

23.2.2.3 400 mm dia


Code Description Unit Quantity Rate Rs.
Details of cost for 14 metre
MACHINERY :
0020 Hydraulic Excavator (3D) with driver and fuel. day 0.95 7000.00
1235 Diesel oil litre 16.00 80.87
Extra diesel required for boring in rockystrata
0005 Hire charges of Diesel Truck - 9 tonne day 0.4286 3940.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2 x30)/140
Loading, unloading &Errection charges of drilling Rig
Machine
LABOUR
0114 Beldar day 4.00 645.00
0130 Mistry day 1.00 784.00
7763 Water supply tanker of 5000 litre capacity each 1.00 1500.00
Extra labour to assist M/C operator &security
0134 Rock Hole Driller day 1.20 645.00
0114 Beldar day 8.00 645.00
0103 Blacksmith 2nd class day 1.00 714.00
0113 Chowkidar day 1.00 645.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 14 metre
Cost of 1 metre
Say
23.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casi
of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete,
depths, as per direction of Engineer - in-charge.
23.3.1 100 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7758 uPVC blind pipe 100 mm dia as per IS: 12818 metre 100.00 405.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.50 358.32
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries L.S. 10.07 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"

TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say

23.3.2 150 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7745 uPVC blind pipe 150 mm dia as per IS: 12818 metre 100.00 490.00
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.50 597.20
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries (Adhesive etc.) L.S. 10.07 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say

23.3.3 200 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7746 uPVC blind pipe 200 mm dia as per IS: 12818 metre 100.00 700.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.50 971.45
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries L.S. 10.07 145.72
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say
23.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC
medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories et
complete, for all depths, as per direction of Engineer-in- charge.
23.4.1 100 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7759 uPVC slotted pipe 100 mm dia as per IS: 12818 metre 100.00 425.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.50 358.32
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries (Adhesive etc.) L.S. 10.07 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say

23.4.2 150 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7751 uPVC slotted pipe 150 mm dia as per IS: 12818 metre 100.00 500.00
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 0.50 597.20
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries (Adhesive etc.) L.S. 10.07 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say
23.4.3 200 mm nominal size dia

Code Description Unit Quantity Rate Rs.


Details of cost for 100 metres
MATERIAL
7752 uPVC slotted pipe 200 mm dia as per IS: 12818 metre 100.00 810.00
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 0.50 971.45
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
0114 Beldar day 0.50 645.00
0115 Coolie day 0.50 645.00
9999 Sundries (Adhesive etc.) L.S. 13.42 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 100 metres
Cost of 1 metre
Say

23.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the require
for all leads & lifts, all complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs.

Details of cost for 1 cum.

MATERIAL
7753 Boulder 50 mm to 200 mm cum 1.00 810.00
including carriage
LABOUR
0114 Beldar day 0.25 645.00
9999 Sundries L.S. 1.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 1 Cum.
Say
23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existin
boulders, in required thickness, for all leads & lifts, all complete as per
direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs.


Details of cost for 1 cum.
MATERIAL
7754 Gravel 5 mm to 10 mm cum 1.00 815.00
including carriage
LABOUR
0114 Beldar day 0.25 645.00
9999 Sundries L.S. 1.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 1 Cum.
Say
23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thic
gravel layer, for all leads & lifts, all complete as per direction of
Engineer -in-charge.

Code Description Unit Quantity Rate Rs.


Details of cost for 1 cum.
MATERIAL
7755 Gravel 1.5 mm to 2 mm cum 1.00 815.00
including carriage
LABOUR
0114 Beldar day 0.25 645.00
9999 Sundries L.S. 1.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 1 Cum.
Say
23.8 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ co
required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs.


Details of cost for 1 cum. MATERIAL
Pea Gravel
7772 including carriage cum 1.00 910.00
0114 LABOUR day L.S. 0.30 645.00
9999 Beldar Sundries TOTAL 1.00 2.12
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 Cum.
Say

23.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less tha
size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including pr
mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm
complete, all as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs.


7762 Details of cost for 1 No. RCC drain cover MATERIAL each L.S. 1.00 875.00
9988 Precast R.C.C. perforated slab LABOUR 15.00 2.12
Carriage and fixing charges TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No.
Say

23.10 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) F
steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, in
painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hir
charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-
in-charge.

23.10.1 100 mm nominal size dia having minimum wall thickness 5.00 mm
Code Description Unit Quantity Rate Rs.
7757 Details of cost for 30 metre MATERIAL metre each 30.00 780.00
7764 M.S. pipe 100 mm dia casing pipe 100 metre 5.00 125.00
2343 M.S. socket 100 mm dia sqm 0.30 358.32
13.65.1 Carriage of ductile iron pipes (k7) 100 mm dia including loading day day 10.36 115.10
0114 and unloading Painting with anticorrosive Paint 3.14 1.35 645.00
0130 x.0110x30.00=10.36 sqm. Rate as per Item No.13.65.1 of SH: 0.50 784.00
Finishing LABOUR
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say
2343 M.S. socket 100 mm dia sqm 0.30 358.32
13.65.1 Carriage of ductile iron pipes (k7) 100 mm dia including loading day day 10.36 115.10
0114 and unloading Painting with anticorrosive Paint 3.14 1.35 645.00
0130 x.0110x30.00=10.36 sqm. Rate as per Item No.13.65.1 of SH: 0.50 784.00
Finishing LABOUR
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say

23.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mm

Code Description Unit Quantity Rate Rs.


7743 Details of cost for 30 metre MATERIAL metre each 30.00 1126.00
7765 M.S. pipe 150 mm dia casing pipe 100 metre 5.00 205.00
2344 M.S. socket 150 mm dia sqm 0.30 597.20
13.65.1 Carriage of cast iron pipes 150 mm dia including loading and day day 15.07 115.10
0114 unloading Painting with 1.40 645.00
0130 Anticorrosive Paint 3.14 x0.160x30.00=15.07 sqm. Rate as per 0.50 784.00
Item No.13.65.1 of SH:Finishing LABOUR
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say

23.10.3 200 mm nominal size dia having minimum wall thickness 5.40 mm
Code Description Unit Quantity Rate Rs.
7744 Details of cost for 30 metre MATERIAL metre each 30.00 1400.00
7766 M.S. pipe 200 mm dia casing pipe 100 metre 5.00 265.00
2345 M.S. socket 200 mm dia sqm 0.30 971.45
13.65.1 Carriage of cast iron pipes 200 mm dia including loading and day day 20.25 115.10
0114 unloading Painting with 1.45 645.00
0130 anticorrosive Paint 3.14 x0.210x30.00=20.25 sqm. Rate as per 0.50 784.00
Item No.13.65.1 of SH:Finishing LABOUR
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say
23.11 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) F
slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, con
8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface wit
of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories
complete, for all depths, as per direction of Engineer -in-charge.
23.11.1 100 mm nominal size dia

Code Description Unit Quantity Rate Rs.


7757 Details of cost for 30 metre MATERIAL metre each 30.00 780.00
7764 M.S. pipe 100 mm dia casing pipe L.S. 5.00 125.00
9999 M.S. socket 100 mm dia Sundries 100 metre 906.04 2.12
2343 Carriage of ductile iron pipes (k7) 100 mm dia including loading sqm 0.30 358.32
13.65.1 and unloading Painting with anticorrosive Paint 3.14 day day 10.36 115.10
0114 x.11x30.00=10.36 sqm Rate as per Item No.13.65.1 of 1.35 645.00
0130 SH:Finishing LABOUR 0.50 784.00
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say

23.11.2 150 mm nominal size dia


Code Description Unit Quantity Rate Rs.
7743 Details of cost for 30 metre MATERIAL metre each 30.00 1126.00
7765 M.S. pipe 150 mm dia casing pipe L.S. 5.00 205.00
9999 M.S. socket 150 mm dia Extra for making slots 100 metre 1208.05 2.12
2344 Carriage of cast iron pipes 150 mm dia including loading and sqm 0.30 597.20
13.65.1 unloading Painting with day day 15.07 115.10
0114 anticorrosive Paint 3.14 x.160x30.00=15.07 sqm. Rate as per Item 1.40 645.00
0130 No.13.65.1 of SH:Finishing LABOUR 0.50 784.00
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say
23.11.3 200 mm nominal size dia

Code Description Unit Quantity Rate Rs.


7744 Details of cost for 30 metre MATERIAL metre each 30.00 1400.00
7766 M.S. pipe 200 mm dia casing pipe L.S. 5.00 265.00
9999 M.S. socket 200 mm dia Extra for making slots 100 metre 1208.05 2.12
2345 Carriage of cast iron pipes 200 mm dia including loading and sqm 0.30 971.45
13.65.1 unloading Painting with day day 20.25 115.10
0114 anticorrosive Paint 3.14 x 0.210x30.00=20.25 sqm. Rate as per 1.40 645.00
0130 Item No.13.65.1 of SH:Finishing LABOUR 0.50 784.00
Beldar Mistry TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost for 30 metre
Cost of 1 metre
Say

23.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable
without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required
is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw
by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all
including hire & labour charges of air
compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs.


0040 Details of cost for 8 Hours MACHINERY : day litre 1.00 1600.00
1235 Air compressor 250 cfm with two leads for pneumatic cutters/ 48.00 80.87
hammers.
MATERIAL
Diesel oil TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 8 Hours
Cost of 1 Hour
Say
23.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ c
removable as per requirement, all complete for borewell of:
23.13.1 100 mm dia

Code Description Unit Quantity Rate Rs.


7760 Details of cost for 1 No MATERIAL each 1.00 135.00
100mm dia MS screwed cap with locking arrangement
M.S. cap 100 mm dia
Add 5% labour factor on P TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say

23.13.2 150 mm dia


Code Description Unit Quantity Rate Rs.
7747 Details of cost for 1 No MATERIAL each 1.00 150.00
150 mm dia MS screwed cap with locking arrangement
M.S. cap 150 mm dia Add 5% labour facor on X TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say

23.13.3 200 mm dia

Code Description Unit Quantity Rate Rs.


7748 Details of cost for 1 No MATERIAL each 1.00 200.00
200 mm dia MS screwed cap with locking arrangement
M.S. cap 200 mm dia Add 5% labour facor on X TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say

23.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (pa
including necessary bolts & nuts of required size complete.
23.14.1 100 mm clamp

Code Description Unit Quantity Rate Rs.


10.1 Details of cost for 1 No MATERIAL kg L.S. 15.60 93.05
9999 Clamps made of MS flat of size 100x10mm thick1x2mt.x7.80 kg 25.00 2.12
per mt.=15.60 kg.
Rate as per Item No.10.1 of SH:Steel Work Sundries, nuts and
bolts etc.
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 1 No
Say

23.14.2 150 mm clamp


Code Description Unit Quantity Rate Rs.
10.1 Details of cost for 1 No MATERIAL kg L.S. 16.38 93.05
9999 Clamps made of MS flat of size 100x10mm thick1x2.10 mt.x7.80 30.00 2.12
kg per mt.=16.38 kg.
Rate as per Item No.10.1 of SH:Steel Work Sundries, nuts and
bolts etc.
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 1 No
Say
23.14.3 200 mm clamp

Code Description Unit Quantity Rate Rs.


10.1 Details of cost for 1 No MATERIAL kg L.S. 18.72 93.05
9999 Clamps made of MS flat of size 100x10mm thick1x2.40 mt.x7.80 30.00 2.12
kg per mt.=18.72 kg.
Rate as per Item No.10.1 of SH:Steel Work Sundries, nuts and
bolts etc.
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 1 No
Say

23.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:
23.15.1 100 mm dia

Code Description Unit Quantity Rate Rs.


7761 Details of cost for 1 No MATERIAL each L.S. 1.00 160.00
9999 M.S. bail plug 100 mm dia Sundries 5.00 2.12
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say

23.15.2 150 mm dia


Code Description Unit Quantity Rate Rs.
7749 Details of cost for 1 No MATERIAL each L.S. 1.00 200.00
9999 M.S bail plug 150 mm dia Sundries 5.00 2.12
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say
23.15.3 200 mm dia

Code Description Unit Quantity Rate Rs.


7750 Details of cost for 1 No MATERIAL each L.S. 1.00 220.00
9999 M.S bail plug 200 mm dia Sundries 5.00 2.12
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 1 No
Say

SUB HEAD : 24.0


CONSERVATION OF
HERITAGE BUILDINGS
1473
24.1 Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechan
means, including preparing and cleaning the surface for re-
pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead.

Code Description Unit Quantity Rate Rs.


Detail of cost for 10 sqm
LABOUR
0114 Beldar day 0.53 645.00
0115 Coolie day 0.08 645.00
0101 Bhisti day 0.07 714.00
9999 Sundries L.S. 1.43 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 me
above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S
1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis,
M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execu
of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bra
runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential s
for the workmen etc., complete as per directions and approval of Engineer-in- charge.
Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only f
of all items for such works.

Code Description Unit Quantity Rate Rs.


Details of cost for area 22.5x9.0=202.50 sqm MATERIAL
Assuming shuttering material will become unserviceable after use of 40
times Adding for maintenance @ 10% of cost

Taking slvage value after full use of material @ 25% of cost

7397 Base jack each kilogram 0.30 145.00


4009 Qty taken for cost of using once =14x0.85/40=0.2975 Mild steel tubes hot kg 80.02 60.00
7387 finished welded type quintal 2.63 40.00
1034 Vertical standard 2.5m length=7x2x9x2.5=315.00 m Side support 6.00m each 0.008 5200.00
7346 length=3x2x6.00=36.00m Horizonatal support 2.55 46.00
3.00mlength=18x3x3.00=162.00m Total=1026.00m
@ 3.67 kg/m =3765.42 kgQty taken for
cost of using once= 3765.42x0.85/40=80.02kg Spigot for standard
jointing
7x2x9=126 nos x 0.40m length = 50.40m @2.46kg
/m=123.98kgQty taken for cost of using once= 123.98x0.85/40=2.63kg
Bolts and nuts upto 300 mm in length
2x7x2x9=252 nos @ 0.15 kg each=37.80 kg =0.378qQty taken for cost of
using once= 0.378x0.85/40=0.008q
Double coupler

Clamp coupler for fixing MS tube with scafolding


2x3x2+2x18x3=120 nosQty taken for cost of using once=
120x0.85/40=2.55 nos
7398 Challies each 1.91 765.00
3 nos x 18 lines=54 nosTwo level plate challies=2x18
lines=36nosTotal=90 nos
Qty taken for cost of using once=90x0.85/40=1.9125 nos
7399 Cup lock each 27.92 48.00
For Vertical standards=(5x7x2x9=630 nos) +(2x18x19=694
nos)Total=1314 nos
Qty taken for cost of using once= 1314x0.85/40=27.92
2205 Carriage of Steel tonne 6.054 145.72
40mm dia MS pipe=3765.42kg
25mm spigot=123.98kgNuts &
bolts=37.80kgclamp=120 [email protected]
each=120.00kgChallies=90 nos @ 15.00kg
each=1350.00kgCup locks=1314 nos @
0.50kg each=
657.00kgTotal=6054.20kg=6.054 tonne
LABOUR
0116 Fitter (grade 1) day 15.50 784.00
0114 Beldar day 31.00 645.00
9999 Sundries L.S. 1035.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 202.50 sqm
Cost of 1.00 sqm
Say
24.3 Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, veg
etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical clean
approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scr
also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any sc
damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all
including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the
building/structure, all as per direction of Engineer-in-charge
(The rate is inclusive of all materials & labours involved except scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 10 sqm
MATERIAL
7767 Stone cleaning chemical approved by ASI litre 0.10 270.00
1 kg teepal of 3% solution for 10 sqm area
for 10sqm = 0.10 liter
7771 Liquid Amonia 5% litre 0.17 145.00
LABOUR (for applying the camical Salution)
0103 Blacksmith 2nd class day 0.20 714.00
0114 Beldar day 0.20 645.00
0128 Mate day 0.10 714.00
9999 Cleaning T & P & its manitinance cost (Jet Pump, electrice
cable, horse pipe, waler pipe, Nozel safety belt Rope &
mantance cost and safety machine for window etc.)
L.S. 1.00 2.12
6501 Sand zone V (Jamuna) cum 0.0283 1300.00
LABOUR (for pressure cleaning)
0103 Blacksmith 2nd class day 0.40 714.00
0114 Beldar day 0.80 645.00
0128 Mate day 0.10 714.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.4 Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand
manufacturer, on cleaned sand stone surface at desired locations as per direction
of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 10 sqm
MATERIAL
7775 Sodium pentachlorophenate Kg 0.10 500.00
LABOUR
0103 Blacksmith 2nd class day 0.25 714.00
0114 Beldar day 0.25 645.00
0128 Mate day 0.125 714.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.5 Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1
lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}.
(The rate is inclusive of all materials & labours involved except scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 10 sqm
MATERIAL
3.19 Rate as per Item No.3.19 of SH:Mortars cum 0.023 3140.50
LABOUR
0155 Mason (average) day 0.92 749.00
0115 Coolie day 1.37 645.00
0101 Bhisti day 0.93 714.00
9999 Sundries L.S. 4.03 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.6 Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble
dust}. (The rate is inclusive of all materials & labours involved except scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 10 sqm
MATERIAL
3.19 Rate as per Item No.3.19 of SH:Mortars cum 0.023 3140.50
LABOUR
0155 Mason (average) day 0.92 749.00
0115 Coolie day 1.37 645.00
0101 Bhisti day 0.93 714.00
9999 Sundries L.S. 4.03 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.7 Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-cha
approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of c
stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as pe
the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except
scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 5 sqm
MATERIAL
7769 Stone surface strengthening chemical approved by ASI litre 1.00 835.00
LABOUR
0131 Painter day 0.15 714.00
0114 Beldar day 0.15 645.00
9999 Sundries L.S. 6.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 5.00 sqm
Cost of 1.00 sqm
Say
24.8 Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeol
of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (On
approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform a
chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is
inclusive of all materials & labours involved except scaffolding).

Code Description Unit Quantity Rate Rs.


Detail of cost for 45 sqm
MATERIAL
7768 Water repallent chemical approved by ASI litre 1.00 1100.00
7770 Turpentine oil litre 12.00 50.00
LABOUR
0131 Painter day 1.00 714.00
0114 Beldar day 1.00 645.00
9999 Handling / Transportation charges L.S. 6.00 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 45.00 sqm
Cost of 1.00 sqm
Say

SUB HEAD : 25.0


STRUCTURAL GLAZING ALUMINIUM
COMPOSITE PANEL
25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings a
shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 m
conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of materia
cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this accoun
of aluminium extruded section shall be taken for
purpose of payment.

Code Description Unit Quantity Rate Rs.


Details of cost for 6.50 kg
Width of the unit 1.6 m
Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm, No of Panels 1 no
Aluminium Weight per sqm = 6.50 Kg/m2
Vision Height 2.2 m
Add for cleats, sleeves, screws etc. @5% = 0.33 kg
Add wastage @ 5% = 0.34 kg
Total = 7.17 kg
Details of cost for 6.50 kg
MATERIALS
7306 Aluminium T or L sections kilogram 7.17 190.00
7392 Powder coating 50 microns on aluminium sections kilogram 7.17 61.00
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 6.5 kg
Cost for 1 kg
Say
25.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural gla
open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the s
passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections f
glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamp
structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water
pressure equalisation & drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and
to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/
masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent b
contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the s
silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape
blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around
the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required
as per the site conditions, to seal the gap between the building structure and
all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by
incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary
holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for
fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges
including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as
specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a
structural designer, dully approved by Engineer-in-charge. The item also includes the
cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on
the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for
occupation. In the end, the Contractor shall provide a
water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural
drawings, as per item description, as specified, as per the approved shop
drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the
grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items
under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of
grooves) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds
2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration
Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance
of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other
accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing
method for a range of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any
failure) as per ASTME-330-10 testing method for a range upto 50 mm
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on
site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Code Description Unit Quantity Rate Rs.


Details of cost for 6.72 sqm
Width of the unit 1.6 m
Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm, No of Panels 1 no
Aluminium Weight per sqm = 6.50 Kg/sqm
Vision Height 2.2 m
Sparndrel Height 2.0 m
Details of cost for 6.72 sqm
MATERIALS
2605 Structural sealant - 6 mm x 12 mm metre 17.02 31.00
2606 Spacer tape 6.4 mm thick x 6 mm wide metre 20.11 21.00
2607 Weather Sealant - Non Staining (600 ml) each 1.96 332.00
2608 Weather Sealant - Normal (300 ml) each 2.55 102.00
2609 MS Brackets/Aluminium Alloy Brackets kg 9.78 104.00
2610 Silicon Gasket in Kg (Above 50 g / m) kg 0.78 484.00
2611 EPDM Gasket in Kg (Above 60 g / m) kg 0.70 156.00
2612 Anchor Fastner - M10 each 2.00 11.00
2613 SS Bolt with washer of sizes for structural glazing / ACP
Cladding each 2.00 37.00
2630 Baker rod metre 5.04 6.00
2614 SS Screws of sizes for structural glazing /ACP Cladding each 52.00 4.00
2632 Fire Stop metre 1.60 480.00
2615 Protective Tape metre 6.72 22.00
2616 GI flashing - 1.2 mm Thick kg 3.96 61.00
8654 Masking tape metre 6.72 2.18
9999 Sundries L.S. 225.50 2.12
9999 Sundries (For Fabrication) L.S. 1804.03 2.12
9999 Sundries (For Installation) L.S. 1804.03 2.12
9999 Sundries (Transporation) L.S. 451.00 2.12
9999 Sundries (Scaffolding / Loading / Unloading) L.S. 573.00 2.12
9999 Sundries (Designing charges etc.) L.S. 216.18 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulate
(double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass
approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clea
6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all comp
required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the E
Charge.
The IGUs shall be assembled in the factory/ workshop of the glass processor.

(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2)
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weath
sealant) provided and fixed in position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat S
clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection inter
light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The prop
performance glass shall be decided by technical sanctioning authority as per the site requirement.

Code Description Unit Quantity Rate Rs.


Details of cost for 6.72 sqm
Width of the unit 1.6 m
Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm, No of Panels 1 no
Area of Glass deducting area of gap/grove 5% = 6.38 sqm
Vision Height 2.2 m
Wastage 10% = 0.638 sqm say 0.7 sqm
Net = 7.02 sqm
Details of cost for 6.72 sqm
MATERIALS
2617 6 mm thick High performance glass sqm 7.02 1030.00
2618 6 mm thick clear heat strengthened glass sqm 7.02 670.00
9999 Sundries (for insurance Charges) L.S. 126.27 2.12
9999 Sundries ( Fabrication charges including silicon sealant, baker
rod, desecant etc. L.S. 2120.13 2.12
9999 Transporation including loading and unloading L.S. 126.27 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 6.72 sqm
Cost for 1 sqm
Say

25.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessorie
hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min
cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts,
washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as
directed by the Engineer- in-Charge.

Code Description Unit Quantity Rate Rs.


Details of cost for 1.76 sqm
Width of the unit 1.6 m
Shuttter Weight
Height of the unit 1.1 m
Outer glass 6 mm
Area 1.76 sqm
Inner glass 6 mm
Aluminium Weight per sqm 7.78 Kg
Al weight = 1.76x7.78 = 13.7 Kg
No of Locking Point 4 no Total 67 Kg
Wedge Block 1 no
Details of cost for 1.76 sqm
MATERIALS
2619 6 mm thick clear heat strengthened glass each 3.00 132.00
2611 EPDM Gasket in Kg (Above 60 g / m) kg 0.80 156.00
2614 SS Screws of sizes for structural glazing / ACP Cladding each 49.00 4.00
2615 Protective Tape metre 1.76 22.00
2620 ARMS GS HD -TOP HUNG -20"-TYPE P-COUPLE pair 1.00 1390.00
2621 Connection Block each 2.00 36.00
2622 Curtain wall striker each 4.00 87.00
2623 Adjustable Fastening Pawl each 4.00 36.00
2624 Corner drive each 2.00 260.00
2625 Top wedge Block each 1.00 122.00
9999 Sundries L.S. 118.00 2.12
9999 Sundries (For Fabrication) L.S. 354.36 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 1.76 sqm
Cost for 1 sqm
Say
25.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the st
glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass woo
mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fi
insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, m
randomly oriented glass fibres distributed in a binder by a wet- lay process including fixing 1.5 mm thick solid aluminum sheet back
mm thick cement board including SS rivets, nuts, bolts, washers etc complete.

Code Description Unit Quantity Rate Rs.


Details of cost for 3.23 sqm
Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area including wastage @5 % = 3.39
Details of cost for 3.23 sqm
MATERIALS
2626 Glass wool Denisity 48 Kg / m3 with Black Glass Tissue (BGT)
sqm 3.39 255.00
2634 GI/Aluminium Sheet (0.8 mm thick) kg 21.30 55.00
2627 SS Screws - # 8 x 19 each 32.00 7.00
2628 Weather Sealant - DC 789 cartridge 2.00 125.00
2629 Cement Board sqm 3.39 245.00
9999 Sundries with clips & adhesives L.S. 308.50 2.12
9999 Sundries (For Fabrication) L.S. 170.64 2.12
9999 Sundries (For Installation) L.S. 170.64 2.12

TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of a
colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of th
vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved s
as specified, and as directed by the Engineer- in- Charge.
For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone se
provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is incl
relevent
Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light
(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U valu
W/m2 K etc. . The
properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Code Description Unit Quantity Rate Rs.


Details of cost for 3.23 sqm
Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area i/c wastage @ 5 % = 3.39 sqm
Details of cost for 3.23 sqm
MATERIALS
2617 6 mm thick High performance glass sqm 3.39 1030.00
9999 Sundries (Insurance charges) L.S. 43.46 2.12
9999 Sundries (Fabrication charges including silicon sealant, baker
rod, desecant etc.) L.S. 682.55 2.12
9999 Sundries (transporation including loading
& unloading) L.S. 147.59 2.12
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.8 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS
The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm
toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. T
and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts a
bottom using SS channel of 50x25x2mm using fastener &
anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to
prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system
to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps a
& in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully wate
proof.
The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&
other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plate
anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing inc
thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Code Description Unit Quantity Rate Rs.


Details of cost for 35.28 Sqm
Description WD HT Nos Area (Sqm)
Facade Area 7.00 5.04 1.00 35.28
Fin Area 0.40 2.30 5.00 4.60
(A) Spider Fitting
8945 4 Point spider fittings of SS-316 grade with fin but without flat
head bolt(c/c routel distance 200mm) each 5.00 3318.00
8946 2 Point wall mounted spider fitting of SS- 316 grade without flat
head bolt and anchor fastener (c/c routel distance 200mm)
each 2.00 1659.00
8947 1 Point wall mounted spider fitting of SS-316 grade without flat
head bolt and anchor fastener (c/c routel distance 200mm)
each 12.00 1300.00
8948 Flate head bolt Nos 36.00 651.00
8949 400 mm long fin plate without fastners pair 5.00 5931.00
(B) Local Hardware
2612 Anchor Fastner - M10
For one point spider fitting =12x2=24 nos
For two point spider fitting =2x2=4 nos For
400mm fin plates =5x6=30 nosTotal=58 nos each 58.00 11.00
8560 Non staining water resistant Clear silicon filling in gap metre 49.28 70.00
Vr. joints between glasses = 7x5.04=35.28 m
Hr.joints between glass & wall =
2x7.00=14.00 mTotal=49.28 m
8559 Stainless steel U Channel of size (50x25x2mm) metre 7.00 160.00
9999 Sundries(Baker Road, Screw &Accessories) L.S. 1000.00 2.12
9999 Labour L.S. 10000.00 2.12
9999 Scaffolding L.S. 2600.00 2.12
(C) Glass Area
8778 Toughened glass 12 mm thickness sqm 37.04 1750.00
with hole =7.00x5.04=35.28 sqm + 1.76 sqm (Add 5%
Wastage)Total = 37.04 sqm
2415 21mm thick clear toughened Laminated glass for fins with holes
sqm 4.83 6120.00
= 5x2.30x.40=4.60sqm + 0.23sqm
(Add 5% Wastage)Total = 4.83 sqm
TOTAL
Add 1 % Water charges on "W"
TOTAL
Add GST on "X" (multiplying factor 0.1405)
TOTAL
Add 15% CPOH on "Y"
TOTAL
Add Cess @ 1% on "Z"
Cost of 35.28 sqm
Cost of 1 sqm
Say
SUB HEAD : 26.0
NEW TECHNOLOGIES AND MATERIALS
26.1 Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length
minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materia
Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm
expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm
door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum
1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-
charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10m x 10m = 100 sqm
MATERIAL
8021 Bamboo wood Tile Flooring 14mm thick, minimum 1800 mm sqm
length and 100 mm wide 110.00 3470.00 381700.00

100 + 10 (Add for wastage @10%) = 110 sqm


8022 Bamboo wood Quarter Round 18mm thick of size 1900mm x metre
18mm 39.90 115.00 4588.50

8023 Bamboo wood door reducer 14mm thick of size 1900mm x metre
44mm 2.00 255.00 510.00

8015 Expanded polyethylene Foam sheet 4mm thick of Density sqm


40kg/m3 105.00 20.00 2100.00

100 + 5 (Add for wastage @5%) = 105 sqm


1246 Silicon based Joint Sealant for Tiles kg 5.00 160.00 800.00
1247 Rubber base Adhesive kg 5.00 223.00 1115.00
LABOUR
0111 Carpenter 1st class day 3.00 784.00 2352.00
0114 Beldar day 3.00 645.00 1935.00
9999 Sundries L.S. 100.00 2.12 212.00
TOTAL 395312.50
Add 1 % Water charges on "W" 3953.13
TOTAL 399265.63
Add GST on "X" (multiplying factor 0.1405) 56096.82
TOTAL 455362.45
Add 15% CPOH on "Y" 68304.37
TOTAL 523666.81
Add Cess @ 1% on "Z" 5236.67
Cost of 100 sqm 528903.48
Cost of 1 sqm 5289.03
Say 5289.05
26.2 Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14mm thick, 1900mm length (m
and 85mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Mate
Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expand
polyethylene foam sheets having 40kg/cum density over prepared surface. The bamboowood planks shall have minimum density of 1000K
minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10 sqm skirting
MATERIAL
8024 Bamboo wood Skirting 14mm thick of Size 1900mm x 85mm metre
120.59 300.00 36177.00

Area of 1 length skirting is 1.9 m x 0.085 m = 0.162 sqm


Quantity required for 10 sqm = 10 / 0.1615 = 61.92 pieces
Add 2.5% wastage= 1.548
Total = 61.92 + 1.548 = 63.468
Qty in running mtr = 63.468 x1.9m = 120.59 running meter
8015 High Density Expanded poly ethylene Foam sheet 4mm thick of Density sqm
40kg/m3 10.50 20.00 210.00

10 + 0.5 (Add for wastage @5%) = 10.5 sqm


8210 Stainless steel screws 50 mm 100 Nos 1.86 300.00 558.00
(62x3=186 nos)
1246 Silicon based Joint Sealant for Tiles kg 1.00 160.00 160.00
1247 Rubber base Adhesive kg 1.00 223.00 223.00
LABOUR
0111 Carpenter 1st class day 1.00 784.00 784.00
0114 Beldar day 1.00 645.00 645.00
9999 Sundries L.S. 20.00 2.12 42.40

TOTAL 38799.40
Add 1 % Water charges on "W" 387.99
TOTAL 39187.39
Add GST on "X" (multiplying factor 0.1405) 5505.83
TOTAL 44693.22
Add 15% CPOH on "Y" 6703.98
TOTAL 51397.21
Add Cess @ 1% on "Z" 513.97
Cost of 10 sqm 51911.18
Cost of 1 sqm 5191.12
Say 5191.10
26.3 Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimu
length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Build
Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to fram
of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile
cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall
before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/c
minimum Hardness 1000 Kgf. with
Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 10m x 9.5m = 95 sqm
MATERIAL
8025 Bamboo wood Tile Wall Cladding 10mm thick, minimum 1800 mm length sqm
and minimum 100 mm wide 104.50 3400.00 355300.00

10 x 9.5 = 95 + 9.5 (Add for wastage @10%) = 104.5 sqm


8026 Bamboo wood T-mold 14mm thick of size 1900mm x 44mm metre 41.62 250.00 10405.00
At end joints of planks = 4x9.91 = 39.64 mtr + 1.98 (Add for
wastage 5%) = 41.62 mtr
8027 Bamboo wood Threshold 14mm thick of size 1900mm x 44mm metre
40.95 255.00 10442.25

At perriferi of cladding = 2x(10+9.5)+1.95 (Add for wastage


@5%) =40.95 metre
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm
199.50 10.00 1995.00

(2x10x9.5) = 190 + 9.5 (Add for wastage @5%)=199.5 sqm


8210 Stainless steel screws 50 mm 100 Nos 2.58 300.00 774.00
@500mm c/c at teak wood frame
8212 Stainless steel screws 30 mm 100 Nos 18.50 230.00 4255.00
(5nos in each panels)
No of panels=95/(1.9 x 0.135)=370 nos
No. of screws= 370 x 5=1850 nos
1190 Second class teak wood in planks 10 cudm 5.2866 791.00 4181.70
10 metre height, at every 1.9 meter height one length of 10
metre i.e (5x9.91x0.02x
0.015+2x10x0.02x.015+2x9.50x.02x.015+4x9.91x0.04x0.015)+
wastage @5% =0.052866 cum cudm
LABOUR
0111 Carpenter 1st class day 5.00 784.00 3920.00
0112 Carpenter 2nd class day 5.00 714.00 3570.00
0114 Beldar day 5.00 645.00 3225.00
9999 Sundries L.S. 100.00 2.12 212.00
TOTAL 398279.95
Add 1 % Water charges on "W" 3982.80
TOTAL 402262.75
Add GST on "X" (multiplying factor 0.1405) 56517.92
TOTAL 458780.67
Add 15% CPOH on "Y" 68817.10
TOTAL 527597.77
Add Cess @ 1% on "Z" 5275.98
Cost of 95 sqm 532873.74
Cost of 1 sqm 5609.20
Say 5609.20
26.4 Providing & fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutters for
doors windows, clerestorey windows with pre-molded minimum 30mm thick planks, in approved colours, texture & finish. It shall have 10m
25mm deep grove to fit in panels.The bamboo wood shall have minimum density of 1000 Kg/cum, minimum Hardness 1000 Kgf. All styles a
shall have profiled interlocking system locked in place by bamboo pins, all complete as per direction of Engineer in charge. (The panelling
for separately).

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutters of Bamboowood 200 x 108cm = 2.16
sqm
MATERIAL
8028 Bamboo wood shutter of doors 10 cudm 4.83 1700.00 8211.00
Styles 4x2.00x0.115x0.03 =0.0276 cum +
Top rails 1x1.08x0.11x0.03m = 0.0036 cum +
Bottom rails 1x1.08x0.212x0.03 = 0.0069 cum +
Lock rails 1x1.08x0.18x0.03 = 0.0058 cum
Total =0.0439 cum + 0.004 cum
(Wastage @5%)
Grand Total =0.0483 cum OR 48.30 cudm
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos
0.40 310.00 124.00

8211 Stainless steel screws 40 mm 100 Nos 0.32 250.00 80.00


LABOUR
0156 Carpenter (average) day 0.33 749.00 247.17
0114 Beldar day 0.33 645.00 212.85
9999 Sundries T&P etc. L.S. 5.62 2.12 11.91
TOTAL 8886.93
Add 1 % Water charges on "W" 88.87
TOTAL 8975.80
Add GST on "X" (multiplying factor 0.1405) 1261.10
TOTAL 10236.90
Add 15% CPOH on "Y" 1535.54
TOTAL 11772.44
Add Cess @ 1% on "Z" 117.72
Cost of 2.16 sqm 11890.16
Cost of 1 sqm 5504.71
Say 5504.70
26.5 Providing & fixing in position Phenol bonded Bamboo wood panelling of 10mm thick, in 25 to 40 mm thick panelled or panelled
shutters for doors, windows, clerestorey windows, in approved colour, texture & finish. The bamboowood planks shall have minimum dens
Kg/cum & minimum Hardness 1000 Kgf. The panels shall have profiled interlocking system locked in place with bamboo pins all complete
direction of the Engineer in-charge. (area of opening for panel inserts
excluding portion inside grooves or rebates to be measured)

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for shutters of a door with 2/3rd panelling…
200 x 108 cm = 2.16 sqm
Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
8029 Bamboo wood panelling (10mm thick) 10 cudm 0.80 1680.00 1344.00
4x47.2x38.65x1.0cm = 0.0073cum + 0.0007 sqm (Add Wastage
@10%)
Total = 0.008 cum OR 8 cudm
LABOUR
0156 Carpenter (average) day 0.57 749.00 426.93
9999 Sundries L.S. 4.42 2.12 9.37
TOTAL 1780.30
Add 1 % Water charges on "W" 17.80
TOTAL 1798.10
Add GST on "X" (multiplying factor 0.1405) 252.63
TOTAL 2050.74
Add 15% CPOH on "Y" 307.61
TOTAL 2358.35
Add Cess @ 1% on "Z" 23.58
Cost of 0.66 sqm 2381.93
Cost of 1 sqm 3608.99
Say 3609.00
26.6 Providing & fixing in position 65 mm thick factory made door frame of Phenol bonded Bamboo wood (superior class, interior u
approved colour, texture and finish.The bamboo wood shall have minimum density of 1000 Kg/cum, minimum hardness 1000 Kgf. The door
have tenon & mortise interlocking system, to be fixed to the wall with 100 mm size G.I screws all a complete as per direction of Engineer-in

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 33 cudm
MATERIAL
8030 Superior class Bamboo wood door frame 65 mm thick 10 cudm 3.40 1675.00 5695.00
2x206.75x9.5x6.5 cm = 0.0255 cum +
1x117.50x9.5x6.5 cm = 0.0072 cum
Total = 0.033 cum = 33 cudm
+ 0.001 cum (Add for wastage @ 5%)
Grand total = 0.034 cum = 34 Cudm
LABOUR
0111 Carpenter 1st class day 0.72 784.00 564.48
0114 Beldar day 0.07 645.00 45.15
TOTAL 6304.63
Add 1 % Water charges on "W" 63.05
TOTAL 6367.68
Add GST on "X" (multiplying factor 0.1405) 894.66
TOTAL 7262.33
Add 15% CPOH on "Y" 1089.35
TOTAL 8351.69
Add Cess @ 1% on "Z" 83.52
Cost of 33 cudm 8435.20
Cost of 1 cudm 255.61
Say 255.60

26.6A Providing, erecting, laying and fixing in position in 3.5 to 4 mm thick bamboo mat corrugated sheet (BMCS) as per IS: 15476-2004 in roofing with
screws along with EPDM washers complete or with galvanized iron J or L hooks 8mm dia G.I. plain and bitumen washers etc, all complete as per direction of
Charge.

Code Description Unit Quantity Rate Amount


Details of cost for 181.30sqm area.
Consider a sheet of 18mx9m (external dimension of plinth).
Area of roof = 18.5x9.8m = 181.30 sqm.
MATERIAL:
Sheets used = 2x 19 nos (2.44m x 1.05m) & 4x19 nos (1.83mx
1.05m). Total area = (2x19x2.44x1.05)+(4x19x1.83x1.05) =
243.39sqm, Add wastage @ 3% = 7.30 sqm, Total area =
250.69 sqm.
8144 Bamboo Mat corrugated sheets 3.5 to 4mm thick conforming to sqm 250.69 2648.00 663827.12
IS 15476:2004
Weight of sheets, For 2.44mx1.05m sheet size, 12kg/Nos x 38
nos = 456 kgs, For 1.83m x 1.05m sheet size, 9kgs/Nos x 76
Nos = 684 kgs. Total weight of sheet = 456+684 = 1140 kgs =
1.14 tonne
2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne 1.14 17700.00 20178.00
1023 Galvanized steel J or L hooks 8mm dia 10 Nos 68.40 120.00 8208.00
1208 Bitumen washer 100 Nos 6.84 30.00 205.20
1209 G.I. plain washer thick 100 Nos 6.84 35.00 239.40
9977 Carriage of bolts and washers L.S. 11.58 2.12 24.55
9999 Sundries L.S. 56.78 2.12 120.37

LABOUR:
0130 Mistry day 3.00 784.00 2352.00
0112 Carpenter 2nd class day 3.00 714.00 2142.00
0114 Beldar day 9.00 645.00 5805.00
TOTAL 703101.64
Add 1 % Water charges on "W" 7031.02
TOTAL 710132.66
Add GST on "X" (multiplying factor 0.1405) 99773.64
TOTAL 809906.30
Add 15% CPOH on "Y" 121485.94
TOTAL 931392.24
Add Cess @ 1% on "Z" 9313.92
Cost of 181.30 sqm 940706.17
Cost of 1sqm 5188.67
Say 5188.65
Providing and fixing in position ridges of 3.5 to 4 mm thick bamboo mat ridge cap (BMRC) as per IS: 15476-2004 in roofing with self drilling sc
with EPDM washers complete or with galvanized iron J or L hooks 8mm dia
26.6B
G.I. plain and bitumen washers etc, all complete as per direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Amount


Details of cost for length of ridge 18.50 metre (pair of 43cm
width each)
Consider a shed of 18mx9m (external dimensions of plinth).
Length of ridge 18.50 metre.
MATERIAL:
Ridges (Male & female) of size: 1.05m length required = 20 sets
x 1.05m = 21.00 metre, Add wastage @ 5% = 1.05 metre, Total
length = 22.05 metre.
8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conforming to IS 15476:2004 metre
22.05 2570.00 56668.50
9977 Carriage (The ridges to be fixed with the same hooks as the L.S. 19.43 2.12 41.19
sheets)
9999 Sundries L.S. 9.71 2.12 20.59
LABOUR:
0130 Mistry day 0.20 784.00 156.80
0112 Carpenter 2nd class day 0.20 714.00 142.80
0114 Beldar day 0.60 645.00 387.00
TOTAL 57416.88
Add 1 % Water charges on "W" 574.17
TOTAL 57991.05
Add GST on "X" (multiplying factor 0.1405) 8147.74
TOTAL 66138.79
Add 15% CPOH on "Y" 9920.82
TOTAL 76059.61
Add Cess @ 1% on "Z" 760.60
Cost of 18.50 metre 76820.20
Cost of 1 metre 4152.44
Say 4152.45

Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 inclu
providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and han
26.6C (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross mem
connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, g
cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Amount


Details of cost for 100 sqm.
Ceiling area = 100sqm, Add wastage @ 5% = 5sqm, Total area
= 105 sqm
MATERIAL:
8147 4mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 105.00 1738.00 182490.00
Weight: (0.595x0.595m of Bamboo board). Total number of
board = 297. Total weight of Bamboo board = 297 Nos x
1.31kgs/Nos = 389.07 kgs = 0.39 tonne.
2358 Carriage of 4mm thick Bamboo mat board and accessories. tonne 0.39 17700.00 6903.00
8570 GI Main T ceiling section 30x25x0.3 mm (3 metre long) including of each 29.50 210.00 6195.00
wastage of 10%
8571 GI Perimeter wall angle 25x25x0.4 mm (3 metre long) including each 13.50 170.00 2295.00
of wastage of 10%
8572 GI Intermediate cross T section 25x25x0.3 mm (1.2 metre long) each 147.00 80.00 11760.00
including of wastage of 10% on grid cutouts.
8573 GI Intermediate cross T section 25x25x0.3 mm (0.6 metre long) each 147.00 35.00 5145.00
including of wastage of 10% on grid cutouts.
8615 Hanger rod 4mm thick each 72.00 10.00 720.00
8616 Adjustment clip 85x30x0.8mm each 72.00 6.00 432.00
7015 Soffit cleat (size 27x37x25x1.60mm) each 72.00 3.00 216.00
Dash hold fasteners 12.5mm dia, 50mm long with 6mm dia bolts each
7388 72.00 10.00 720.00
9977 Carriage of grid materials L.S. 89.28 2.12 189.27
9999 Sundries L.S. 187.95 2.12 398.45
LABOUR:
0112 Carpenter 2nd class day 28.00 714.00 19992.00
0114 Beldar day 23.00 645.00 14835.00
TOTAL 252290.73
Add 1 % Water charges on "W" 2522.91
TOTAL 254813.63
Add GST on "X" (multiplying factor 0.1405) 35801.32
TOTAL 290614.95
Add 15% CPOH on "Y" 43592.24
TOTAL 334207.19
Add Cess @ 1% on "Z" 3342.07
Cost of 100 sqm 337549.27
Cost of 1sqm 3375.49
Say 3375.50
Providing and fixing at Bamboo Mat board conforming to IS:13958-1994 for partition to frame by bucking or studding with screws etc. comple
26.6D backing or studding to be paid separately)

26.6D.1 3mm thickness


Code Description Unit Quantity Rate Amount
Details of cost for 3.5mx2m = 7.0 sqm
Partition area = 7.0sqm, Add wastage @ 5% = 0.35sqm, Total area =
7.35 sqm
MATERIAL:

8146 3mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: sqm 7.35 1508.00 11083.80
2358 7.35sqm x 2.70 kgs/sqm =19.845 kgs = 0.02 tonne. tonne L.S. 0.02 17700.00 354.00
9999 Carriage of 3mm thick Bamboo mat board and accessories. Sundries and day day 26.91 2.12 57.05
0112 screws 0.90 714.00 642.60
0114 LABOUR: 1.00 645.00 645.00
Carpenter 2nd class Beldar 12782.45
TOTAL 127.82
Add 1 % Water charges on "W" TOTAL 12910.27
Add GST on "X" (multiplying factor 0.1405) TOTAL 1813.89
Add 15% CPOH on "Y" TOTAL 14724.17
Add Cess @ 1% on "Z" Cost of 7 sqm 2208.63
Cost of 1sqm Say 16932.79
169.33
17102.12
2443.16
2443.15
26.6D.2 4mm thickness

Code Description Unit Quantity Rate Amount


8147 Details of cost for 3.5mx2m = 7.0 sqm sqm 7.35 1738.00 12774.30
2358 Partition area = 7.0sqm, Add wastage @ 5% = 0.35sqm, Total area = tonne L.S. 0.03 17700.00 531.00
9999 7.35 sqm day day 26.91 2.12 57.05
0112 MATERIAL: 0.90 714.00 642.60
0114 4mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: 1.00 645.00 645.00
7.35sqm x 3.70 kgs/sqm =27.195 kgs = 0.03 tonne. 14649.95
Carriage of 4mm thick Bamboo mat board and accessories. Sundries and 146.50
screws 14796.45
LABOUR: 2078.90
Carpenter 2nd class Beldar 16875.35
TOTAL 2531.30
Add 1 % Water charges on "W" TOTAL 19406.65
Add GST on "X" (multiplying factor 0.1405) TOTAL 194.07
Add 15% CPOH on "Y" TOTAL 19600.72
Add Cess @ 1% on "Z" Cost of 7 sqm 2800.10
Cost of 1sqm 2800.10
Say

26.6D.3 6mm thickness

Code Description Unit Quantity Rate Amount


8148 Details of cost for 3.5mx2m = 7.0 sqm sqm 7.35 2098.00 15420.30
2358 Partition area = 7.0sqm, Add wastage @ 5% = 0.35sqm, Total area = tonne L.S. 0.04 17700.00 708.00
9999 7.35 sqm day day 26.91 2.12 57.05
0112 MATERIAL: 0.90 714.00 642.60
0114 6mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: 1.00 645.00 645.00
7.35sqm x 5.40 kgs/sqm =39.69 kgs = 0.04 tonne. Carriage of 6mm thick 17472.95
Bamboo mat board and accessories. Sundries and screws 174.73
LABOUR: 17647.68
Carpenter 2nd class Beldar 2479.50
TOTAL 20127.18
Add 1 % Water charges on "W" TOTAL 3019.08
Add GST on "X" (multiplying factor 0.1405) TOTAL 23146.25
Add 15% CPOH on "Y" TOTAL 231.46
Add Cess @ 1% on "Z" Cost of 7 sqm 23377.72
Cost of 1sqm 3339.67
Say 3339.65

26.6D.4 9mm thickness

Code Description Unit Quantity Rate Amount


8149 Details of cost for 3.5mx2m = 7.0 sqm sqm 7.35 2688.00 19756.80
2358 Partition area = 7.0sqm, Add wastage @ 5% = 0.35sqm, Total area = tonne L.S. 0.06 17700.00 1062.00
9999 7.35 sqm day day 26.91 2.12 57.05
0112 MATERIAL: 0.90 714.00 642.60
0114 9mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: 1.00 645.00 645.00
7.35sqm x 8.40 kgs/sqm =61.74 kgs = 0.06 tonne. Carriage of 9mm thick 22163.45
Bamboo mat board and accessories. Sundries and screws 221.63
LABOUR: 22385.08
Carpenter 2nd class Beldar 3145.10
TOTAL 25530.19
Add 1 % Water charges on "W" TOTAL 3829.53
Add GST on "X" (multiplying factor 0.1405) TOTAL 29359.72
Add 15% CPOH on "Y" TOTAL 293.60
Add Cess @ 1% on "Z" Cost of 7 sqm 29653.31
Cost of 1sqm 4236.19
Say 4236.20

26.6D.5 12mm thickness

Code Description Unit Quantity Rate Amount


8150 Details of cost for 3.5mx2m = 7.0 sqm sqm 7.35 3115.00 22895.25
2358 Partition area = 7.0sqm, Add wastage @ 5% = 0.35sqm, Total area = tonne L.S. 0.07 17700.00 1239.00
9999 7.35 sqm day day 26.91 2.12 57.05
0112 MATERIAL: 0.90 714.00 642.60
0114 12mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: 1.00 645.00 645.00
7.35sqm x 10.00 kgs/sqm =73.50 kgs = 0.07 tonne. Carriage of 12mm 25478.90
thick Bamboo mat board and accessories. 254.79
Sundries and screws LABOUR: 25733.69
Carpenter 2nd class Beldar 3615.58
TOTAL 29349.27
Add 1 % Water charges on "W" TOTAL 4402.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 33751.66
Add 15% CPOH on "Y" TOTAL 337.52
Add Cess @ 1% on "Z" Cost of 7 sqm 34089.18
Cost of 1sqm 4869.88
Say 4869.90

26.6E Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and
26.6E.1 frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. an
providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per
Engineer-in-Charge.
9mm thickness

Code Description Unit Quantity Rate Amount


8149 Details of cost for panelling area of 5mx4m = 20.00 sqm with moulding 21.00 2688.00 56448.00
2358 length of 18.00 metre 0.18 17700.00 3186.00
1316 Wall panelling area = 20.00sqm, Add wastage @ 5% = 1.0sqm, Total 45.00 50.00 2250.00
1190 area = 21.00 sqm 2.477 791.00 1959.31
2204 MATERIAL: 0.02477 187.35 4.64
0637 9mm thick Bamboo Mat Board conforming to IS 13958:1994 Weight: 0.70 60.00 42.00
9999 21sqm x 8.40 kgs/sqm =176.4 kgs = 0.18 tonne. 26.91 2.12 57.05
0112 Carriage of 9mm thick Bamboo mat board and accessories. 50mmx50mm 2.00 714.00 1428.00
hardwood plug
Second class teak wood in planks Carriage of timber sqm
Bright finished or black enamelled mild steel screws 40mm Sundries tonne each
LABOUR: 10 cudm cum
Carpenter 2nd class 100 Nos L.S.
day

0114 Beldar day 2.00 645.00 1290.00


TOTAL 66665.00
Add 1 % Water charges on "W" TOTAL 666.65
Add GST on "X" (multiplying factor 0.1405) TOTAL 67331.65
Add 15% CPOH on "Y" TOTAL 9460.10
Add Cess @ 1% on "Z" Cost of 20 sqm 76791.74
Cost of 1sqm 11518.76
Say 88310.50
883.11
89193.61
4459.68
4459.70

26.6E.2 12mm thickness

Code Description Unit Quantity Rate Amount


8150 Details of cost for panelling area of 5mx4m = 20.00 sqm with moulding sqm 21.00 3115.00 65415.00
2358 length of 18.00 metre tonne each 0.21 17700.00 3717.00
1316 Wall panelling area = 20.00sqm, Add wastage @ 5% = 1.0sqm, Total 10 cudm cum 45.00 50.00 2250.00
1190 area = 21.00 sqm 100 Nos L.S. 2.477 791.00 1959.31
2204 MATERIAL: day day 0.02477 187.35 4.64
0637 12mm thick Bamboo Mat Board conforming to IS 13958:1994 0.70 60.00 42.00
9999 Weight: 21sqm x 10 kgs/sqm =210 kgs = 0.21 tonne. Carriage of 12mm 26.91 2.12 57.05
0112 thick Bamboo mat board and accessories. 2.00 714.00 1428.00
0114 50mmx50mm hardwood plug Second class teak wood in planks Carriage 2.00 645.00 1290.00
of timber 76163.00
Bright finished or black enamelled mild steel screws 40mm Sundries 761.63
LABOUR: 76924.63
Carpenter 2nd class Beldar 10807.91
TOTAL 87732.54
Add 1 % Water charges on "W" TOTAL 13159.88
Add GST on "X" (multiplying factor 0.1405) TOTAL 100892.42
Add 15% CPOH on "Y" TOTAL 1008.92
Add Cess @ 1% on "Z" Cost of 20 sqm 101901.34
Cost of 1sqm Say 5095.07
5095.05

26.7 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying w
4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compres
strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorptions ≤ 1% by volume as per AST
oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardent property as per DIN
1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directi
Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8561 Details of cost for 10 Sqm MATERIAL sqm 10.20 550.00 5610.00
0111 Extruded polystyrene rigid insulation board 50 mm thick including 2% day day day 0.25 784.00 196.00
0128 wastage L.S. 0.25 714.00 178.50
0114 LABOUR 0.25 645.00 161.25
9999 Carpenter 1st class Mate 100.00 2.12 212.00
Beldar 6357.75
Sundries (Water based adhesive, fasteners, scaffolding etc.) TOTAL 63.58
Add 1 % Water charges on "W" TOTAL 6421.33
Add GST on "X" (multiplying factor 0.1405) TOTAL 902.20
Add 15% CPOH on "Y" TOTAL 7323.52
Add Cess @ 1% on "Z" Cost of 10 sqm 1098.53
Cost of 1 sqm 8422.05
Say 84.22
8506.27
850.63
850.65
26.8 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, co
with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346)
compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorptions ≤ 1% by volu
ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardent prop
DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as
the direction of Engineer-in-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8561 Details of cost for 10 Sqm MATERIAL sqm 10.20 550.00 5610.00
0111 Extruded polystyrene rigid insulation board 50 mm thick including 2% day day day 0.50 784.00 392.00
0128 wastage L.S. 0.50 714.00 357.00
0114 LABOUR 0.50 645.00 322.50
9999 Carpenter 1st class Mate 100.00 2.12 212.00
Beldar 6893.50
Sundries (Water based adhesive, fasteners, scaffolding etc.) TOTAL 68.94
Add 1 % Water charges on "W" TOTAL 6962.44
Add GST on "X" (multiplying factor 0.1405) TOTAL 978.22
Add 15% CPOH on "Y" TOTAL 7940.66
Add Cess @ 1% on "Z" Cost of 10 sqm 1191.10
Cost of 1 sqm 9131.76
Say 91.32
9223.07
922.31
922.30

26.9 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality a
The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed ed
with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be
using Expendable Fastner with necesary stainless steel screws, all
complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


2491 Details of cost for kitchen cabinate (2.00 x 0.45)+(2.00+0.615)= 2.13 mtr metre metre 2.13 134.00 285.42
2493 MATERIAL each 100 Nos 4.26 32.00 136.32
2494 Pre laminated both side solid foam uPVC profile (45x20mm) PVC edge day day 8.00 6.00 48.00
8210 beading 0.08 300.00 24.00
0111 Expandable fastner with plastic sleeve Stainless steel screws 50 mm 0.10 784.00 78.40
0114 LABOUR 0.10 645.00 64.50
Carpenter 1st class Beldar 636.64
TOTAL 6.37
Add 1 % Water charges on "W" TOTAL 643.01
Add GST on "X" (multiplying factor 0.1405) TOTAL 90.34
Add 15% CPOH on "Y" TOTAL 733.35
Add Cess @ 1% on "Z" Cost for 2.13 metre Cost for 1 metre 110.00
Say 843.35
8.43
851.78
399.90
399.90

26.10 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and
from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The
edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holdin
Shutter shall be fixed to frame using approved hinges with
necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
Code Description Unit Quantity Rate Rs. Amount Rs.
2492 Details of cost for of one shutter 0.46 x0.61m =0.281 sqm MATERIAL sqm 0.281 2153.00 604.99
2493 Solid foam uPVC sheet 20mm thick prelaminated on both side metre L.S. 2.13 32.00 68.16
9999 PVC edge beading Sundries day day 20.00 2.12 42.40
0111 LABOUR 0.20 784.00 156.80
0114 Carpenter 1st class Beldar 0.20 645.00 129.00
TOTAL 1001.35
Add 1 % Water charges on "W" TOTAL 10.01
Add GST on "X" (multiplying factor 0.1405) TOTAL 1011.37
Add 15% CPOH on "Y" TOTAL 142.10
Add Cess @ 1% on "Z" Cost for 0.281 sqm Cost for 1 sqm 1153.46
Say 173.02
1326.48
13.26
1339.75
4767.79
4767.80

26.11 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel
screws complete :

Code Description Unit Quantity Rate Rs. Amount Rs.


8226 Details of cost for 10 nos MATERIAL 10 Nos 1.00 460.00 460.00
8210 Concealed zinc coated hinges 19-20 mm thick with mounting plate 100 Nos L.S. 0.80 300.00 240.00
9977 Stainless steel screws 50 mm Carriage of material day day 2.73 2.12 5.79
0112 LABOUR 0.14 714.00 99.96
0114 Carpenter 2nd class Beldar 0.09 645.00 58.05
TOTAL 863.80
Add 1 % Water charges on "W" TOTAL 8.64
Add GST on "X" (multiplying factor 0.1405) TOTAL 872.44
Add 15% CPOH on "Y" TOTAL 122.58
Add Cess @ 1% on "Z" Cost of 10 nos 995.01
Cost of 1 no 149.25
Say 1144.26
11.44
1155.71
115.57
115.55

26.12 Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH SPECIFICATION for base/su
reinforcement having minimum tensile strength 15kN/m in the longitudinal and transverse direction, with 5kN/m and 7kN/m tensile strength
5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with
38mm X 38mm mesh opening.

Code Description Unit Quantity Rate Rs. Amount Rs.


8956 Details of Cost for 300 Sqm MATERIAL Sqm 300.00 120.00 36000.00
0128 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m in the day day 0.36 714.00 3600.00
0114 longitudinal and transverse direction day 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 45869.04
protective elements for synthetic geogrids and all other activities required 458.69
to complete the item in all respect including taxes and transportation. 10% 46327.73
of "P" 6509.05
LABOUR 52836.78
Mate Beldar 7925.52
Skilled Beldar TOTAL 60762.29
Add 1 % Water charges on "W" TOTAL 607.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 61369.92
Add 15% CPOH on "Y" TOTAL 204.57
Add Cess @ 1% on "Z" Cost for 300 Sqm 204.55
Cost per Sqm
Say

26.13 Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH SPECIFICATION for base/su
reinforcement having minimum tensile strength 20kN/m in the longitudinal and transverse direction, with 7kN/m and 14kN/m tensile strengt
5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with
38mm X 38mm mesh opening.

Code Description Unit Quantity Rate Rs. Amount Rs.


8957 Details of Cost for 300 Sqm MATERIAL sqm 300.00 135.00 40500.00
0128 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20kN/m in the day day day 0.36 714.00 4050.00
0114 longitudinal and transverse direction 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 50819.04
protective elements for synthetic geogrids and all other activities required 508.19
to complete the item in all respect including taxes and transportation. 10% 51327.23
of "P" 7211.48
LABOUR 58538.71
Mate Beldar 8780.81
Skilled Beldar TOTAL 67319.51
Add 1 % Water charges on "W" TOTAL 673.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 67992.71
Add 15% CPOH on "Y" TOTAL 226.64
Add Cess @ 1% on "Z" Cost for 300 Sqm 226.65
Cost per Sqm
Say

26.14 Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH SPECIFICATION for base/su
reinforcement having minimum tensile strength 30kN/m in the longitudinal and transverse direction, with 10.5kN/m and 21kN/m tensile stren
and 5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with
38mm X 38mm mesh opening.

Code Description Unit Quantity Rate Rs. Amount Rs.


8958 Details of Cost for 300 Sqm MATERIAL sqm 300.00 205.00 61500.00
0128 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30kN/m in the day day day 0.36 714.00 6150.00
0114 longitudinal and transverse direction 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 73919.04
protective elements for synthetic geogrids and all other activities required 739.19
to complete the item in all respect including taxes and transportation. 10% 74658.23
of "P" 10489.48
LABOUR 85147.71
Mate Beldar 12772.16
Skilled Beldar TOTAL 97919.87
Add 1 % Water charges on "W" TOTAL 979.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 98899.07
Add 15% CPOH on "Y" TOTAL 329.66
Add Cess @ 1% on "Z" Cost for 300 Sqm 329.65
Cost per Sqm
Say

26.15 Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH
SPECIFICATION for base/sub-base reinforcement having minimum tensile strength 40kN/m in the longitudinal and transverse direction, wi
and 28kN/m tensile strength at 2% and 5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 9
with 38mm X 38mm mesh opening.

Code Description Unit Quantity Rate Rs. Amount Rs.


8959 Details of Cost for 300 Sqm MATERIAL Sqm 300.00 290.00 87000.00
0128 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40kN/m in the day day 0.36 714.00 8700.00
0114 longitudinal and transverse direction day 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 101969.04
protective elements for synthetic geogrids and all other activities required 1019.69
to complete the item in all respect including taxes and transportation. 10% 102988.73
of "P" 14469.92
LABOUR 117458.65
Mate Beldar 17618.80
Skilled Beldar TOTAL 135077.44
Add 1 % Water charges on "W" TOTAL 1350.77
Add GST on "X" (multiplying factor 0.1405) TOTAL 136428.22
Add 15% CPOH on "Y" TOTAL 454.76
Add Cess @ 1% on "Z" Cost for 300 Sqm 454.75
Cost per Sqm
Say

26.16 Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below con
of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering no
geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration
longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minim
thickness of 0.75mm charecteristic opening size (O90) of 110 micron and tensile strength of 8.0 kN/m that will be working as separation or p
layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 k
mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete a
directions of Engineer in charge.
Code Description Unit Quantity Rate Rs. Amount Rs.
8960 Material sqm 300.00 530.00 159000.00
0128 Details of Cost for 300 Sqm Geosynthetic Drainage Composite day day day 0.36 714.00 15900.00
0114 Add 10 per cent of the cost of synthetic Composits for wastage and 6.00 645.00 257.04
0139 accessories for joining sheets with the facia pannels, overlaps and other 3.00 714.00 3870.00
protective elements for synthetic Composits and other miscelleneus 2142.00
activities required to complete the item in all respect including 181169.04
transpotarion & takes. 10% of "P" 1811.69
Mate Beldar 182980.73
Skilled Beldar TOTAL 25708.79
Add 1 % Water charges on "W" TOTAL 208689.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 31303.43
Add 15% CPOH on "Y" TOTAL 239992.95
Add Cess @ 1% on "Z" Cost for 300 Sqm 2399.93
Cost per Sqm 242392.88
Say 807.98
808.00

26.17 Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below con
of canals etc. having thermobonding a draining core - HDPE geonet comprises of two sets of parallel overlayed ribs integrally connected to
rhomboidal shape with a polyethylene film and a nonwoven geotextile having mass per unit area 130 gsm and tensile strength of
8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 0.7 L / (m.s) at hydraulic grad
20 kPa pressure and tensile strength of 13.5 kN/m , with mass per unit area of 830 gsm, at easily accessible location including top and bo
all leads and lifts, manpower and machinery, materials, labour etc. complete and as directed by Engineer
- In - Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8961 Material sqm 300.00 630.00 189000.00
0128 Details of Cost for 300 Sqm Geosynthetic Drainage Composite day day day 0.36 714.00 18900.00
0114 Add 10 per cent of the cost of synthetic Composits for wastage and 6.00 645.00 257.04
0139 accessories for joining sheets with the facia pannels, overlaps and other 3.00 714.00 3870.00
protective elements for synthetic Composits and other miscelleneus 2142.00
activities required to complete the item in all respect including 214169.04
transpotarion & takes. 10% of "P" 2141.69
Mate Beldar 216310.73
Skilled Beldar TOTAL 30391.66
Add 1 % Water charges on "W" TOTAL 246702.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 37005.36
Add 15% CPOH on "Y" TOTAL 283707.75
Add Cess @ 1% on "Z" Cost for 300 Sqm 2837.08
Cost per Sqm 286544.82
Say 955.15
955.15

26.18 Supplying and laying high strength flexible geogrids (HSFG) as soil reinforcement / basal reinforcement as per MORTH 3100 an
made of high tenacity polyester core with polyethylene coating with Minimum Long Term Design Strength (LTDS) of more than 50% of ultim
strength at 30 degree Celcius corresponding to 12 % strain .
26.18.1 Ultimate tensile strength- 100 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8962 MATERIAL Sqm 300.00 200.00 60000.00
0128 Details of Cost for 300 Sqm day day 0.36 714.00 6000.00
0114 Synthetic Geogrid having umtimate tensile strength 100 kN/m day 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 72269.04
protective elements for synthetic geogrids and all other activities required 722.69
to complete the item in all respect including taxes and transportation. 10% 72991.73
of "P" 10255.34
LABOUR 83247.07
Mate Beldar 12487.06
Skilled Beldar TOTAL 95734.13
Add 1 % Water charges on "W" TOTAL 957.34
Add GST on "X" (multiplying factor 0.1405) TOTAL 96691.47
Add 15% CPOH on "Y" TOTAL 322.30
Add Cess @ 1% on "Z" Cost for 300 Sqm 322.30
Cost per Sqm
Say

26.18.2 Ultimate tensile strength- 150 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8963 MATERIAL sqm 300.00 210.00 63000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 6300.00
0114 Synthetic Geogrid having umtimate tensile strength 150 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 75569.04
protective elements for synthetic geogrids and all other activities required 755.69
to complete the item in all respect including taxes and transportation. 10% 76324.73
of "P" 10723.62
LABOUR 87048.36
Mate Beldar 13057.25
Skilled Beldar TOTAL 100105.61
Add 1 % Water charges on "W" TOTAL 1001.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 101106.66
Add 15% CPOH on "Y" TOTAL 337.02
Add Cess @ 1% on "Z" Cost for 300 Sqm 337.00
Cost per Sqm
say

26.18.3 Ultimate tensile strength- 200 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8964 MATERIAL sqm 300.00 340.00 102000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 10200.00
0114 Synthetic Geogrid having umtimate tensile strength 200 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 118469.04
protective elements for synthetic geogrids and all other activities required 1184.69
to complete the item in all respect including taxes and transportation. 10% 119653.73
of "P" 16811.35
LABOUR 136465.08
Mate Beldar 20469.76
Skilled Beldar TOTAL 156934.84
Add 1 % Water charges on "W" TOTAL 1569.35
Add GST on "X" (multiplying factor 0.1405) TOTAL 158504.19
Add 15% CPOH on "Y" TOTAL 528.35
Add Cess @ 1% on "Z" Cost for 300 Sqm 528.35
Cost per Sqm
say

26.18.4 Ultimate tensile strength- 250 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8965 MATERIAL sqm 300.00 350.00 105000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 10500.00
0114 Synthetic Geogrid having umtimate tensile strength 250 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 121769.04
protective elements for synthetic geogrids and all other activities required 1217.69
to complete the item in all respect including taxes and transportation. 10% 122986.73
of "P" 17279.64
LABOUR 140266.37
Mate Beldar 21039.95
Skilled Beldar TOTAL 161306.32
Add 1 % Water charges on "W" TOTAL 1613.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 162919.38
Add 15% CPOH on "Y" TOTAL 543.06
Add Cess @ 1% on "Z" Cost for 300 Sqm 543.05
Cost per Sqm
say

26.18.5 Ultimate tensile strength- 300 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8966 MATERIAL sqm 300.00 360.00 108000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 10800.00
0114 Synthetic Geogrid having umtimate tensile strength 300 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 125069.04
protective elements for synthetic geogrids and all other activities required 1250.69
to complete the item in all respect including taxes and transportation. 10% 126319.73
of "P" 17747.92
LABOUR 144067.65
Mate Beldar 21610.15
Skilled Beldar TOTAL 165677.80
Add 1 % Water charges on "W" TOTAL 1656.78
Add GST on "X" (multiplying factor 0.1405) TOTAL 167334.58
Add 15% CPOH on "Y" TOTAL 557.78
Add Cess @ 1% on "Z" Cost for 300 Sqm 557.80
Cost per Sqm
say

26.18.6 Ultimate tensile strength- 350 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8967 MATERIAL sqm 300.00 370.00 111000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 11100.00
0114 Synthetic Geogrid having umtimate tensile strength 350 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 128369.04
protective elements for synthetic geogrids and all other activities required 1283.69
to complete the item in all respect including taxes and transportation. 10% 129652.73
of "P" 18216.21
LABOUR 147868.94
Mate Beldar 22180.34
Skilled Beldar TOTAL 170049.28
Add 1 % Water charges on "W" TOTAL 1700.49
Add GST on "X" (multiplying factor 0.1405) TOTAL 171749.77
Add 15% CPOH on "Y" TOTAL 572.50
Add Cess @ 1% on "Z" Cost for 300 Sqm 572.50
Cost per Sqm
say

26.18.7 Ultimate tensile strength- 400 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8968 MATERIAL sqm 300.00 450.00 135000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 13500.00
0114 Synthetic Geogrid having umtimate tensile strength 400 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 154769.04
protective elements for synthetic geogrids and all other activities required 1547.69
to complete the item in all respect including taxes and transportation. 10% 156316.73
of "P" 21962.50
LABOUR 178279.23
Mate Beldar 26741.88
Skilled Beldar TOTAL 205021.12
Add 1 % Water charges on "W" TOTAL 2050.21
Add GST on "X" (multiplying factor 0.1405) TOTAL 207071.33
Add 15% CPOH on "Y" TOTAL 690.24
Add Cess @ 1% on "Z" Cost for 300 Sqm 690.25
Cost per Sqm
say

26.18.8 Ultimate tensile strength- 500 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8969 MATERIAL sqm 300.00 500.00 150000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 15000.00
0114 Synthetic Geogrid having umtimate tensile strength 500 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 171269.04
protective elements for synthetic geogrids and all other activities required 1712.69
to complete the item in all respect including taxes and transportation. 10% 172981.73
of "P" 24303.93
LABOUR 197285.66
Mate Beldar 29592.85
Skilled Beldar TOTAL 226878.51
Add 1 % Water charges on "W" TOTAL 2268.79
Add GST on "X" (multiplying factor 0.1405) TOTAL 229147.30
Add 15% CPOH on "Y" TOTAL 763.82
Add Cess @ 1% on "Z" Cost for 300 Sqm 763.80
Cost per Sqm
say

26.18.9 Ultimate tensile strength- 600 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8970 MATERIAL sqm 300.00 550.00 165000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 16500.00
0114 Synthetic Geogrid having umtimate tensile strength 600 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 187769.04
protective elements for synthetic geogrids and all other activities required 1877.69
to complete the item in all respect including taxes and transportation. 10% 189646.73
of "P" 26645.37
LABOUR 216292.10
Mate Beldar 32443.81
Skilled Beldar TOTAL 248735.91
Add 1 % Water charges on "W" TOTAL 2487.36
Add GST on "X" (multiplying factor 0.1405) TOTAL 251223.27
Add 15% CPOH on "Y" TOTAL 837.41
Add Cess @ 1% on "Z" Cost for 300 Sqm 837.40
Cost per Sqm
say

26.18.10 Ultimate tensile strength- 700 kN/m


Code Description Unit Quantity Rate Rs. Amount Rs.
8971 MATERIAL sqm 300.00 650.00 195000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 19500.00
0114 Synthetic Geogrid having umtimate tensile strength 700 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 220769.04
protective elements for synthetic geogrids and all other activities required 2207.69
to complete the item in all respect including taxes and transportation. 10% 222976.73
of "P" 31328.23
LABOUR 254304.96
Mate Beldar 38145.74
Skilled Beldar TOTAL 292450.71
Add 1 % Water charges on "W" TOTAL 2924.51
Add GST on "X" (multiplying factor 0.1405) TOTAL 295375.21
Add 15% CPOH on "Y" TOTAL 984.58
Add Cess @ 1% on "Z" Cost for 300 Sqm 984.60
Cost per Sqm
say

26.18.11 Ultimate tensile strength- 800 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8972 MATERIAL sqm 300.00 725.00 217500.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 21750.00
0114 Synthetic Geogrid having umtimate tensile strength 800 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 245519.04
protective elements for synthetic geogrids and all other activities required 2455.19
to complete the item in all respect including taxes and transportation. 10% 247974.23
of "P" 34840.38
LABOUR 282814.61
Mate Beldar 42422.19
Skilled Beldar TOTAL 325236.80
Add 1 % Water charges on "W" TOTAL 3252.37
Add GST on "X" (multiplying factor 0.1405) TOTAL 328489.17
Add 15% CPOH on "Y" TOTAL 1094.96
Add Cess @ 1% on "Z" Cost for 300 Sqm 1094.95
Cost per Sqm
say

26.18.12 Ultimate tensile strength- 900 kN/m


Code Description Unit Quantity Rate Rs. Amount Rs.
8973 MATERIAL sqm 300.00 850.00 255000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 25500.00
0114 Synthetic Geogrid having umtimate tensile strength 900 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 286769.04
protective elements for synthetic geogrids and all other activities required 2867.69
to complete the item in all respect including taxes and transportation. 10% 289636.73
of "P" 40693.96
LABOUR 330330.69
Mate Beldar 49549.60
Skilled Beldar TOTAL 379880.29
Add 1 % Water charges on "W" TOTAL 3798.80
Add GST on "X" (multiplying factor 0.1405) TOTAL 383679.10
Add 15% CPOH on "Y" TOTAL 1278.93
Add Cess @ 1% on "Z" Cost for 300 Sqm 1278.95
Cost per Sqm
say

26.18.13 Ultimate tensile strength- 1000 kN/m

Code Description Unit Quantity Rate Rs. Amount Rs.


8974 MATERIAL sqm 300.00 950.00 285000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 28500.00
0114 Synthetic Geogrid having umtimate tensile strength 1000 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 319769.04
protective elements for synthetic geogrids and all other activities required 3197.69
to complete the item in all respect including taxes and transportation. 10% 322966.73
of "P" 45376.83
LABOUR 368343.56
Mate Beldar 55251.53
Skilled Beldar TOTAL 423595.09
Add 1 % Water charges on "W" TOTAL 4235.95
Add GST on "X" (multiplying factor 0.1405) TOTAL 427831.04
Add 15% CPOH on "Y" TOTAL 1426.10
Add Cess @ 1% on "Z" Cost for 300 Sqm 1426.10
Cost per Sqm
say

26.18.14 Ultimate tensile strength- 1100 kN/m


Code Description Unit Quantity Rate Rs. Amount Rs.
8975 MATERIAL sqm 300.00 1000.00 300000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 30000.00
0114 Synthetic Geogrid having umtimate tensile strength 1100 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wsatage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 336269.04
protective elements for synthetic geogrids and all other activities required 3362.69
to complete the item in all respect including taxes and transportation. 10% 339631.73
of "P" 47718.26
LABOUR 387349.99
Mate Beldar 58102.50
Skilled Beldar TOTAL 445452.49
Add 1 % Water charges on "W" TOTAL 4454.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 449907.01
Add 15% CPOH on "Y" TOTAL 1499.69
Add Cess @ 1% on "Z" Cost for 300 Sqm 1499.70
Cost per Sqm
say

26.18.15 Ultimate tensile strength- 1200 kN/m


Code Description Unit Quantity Rate Rs. Amount Rs.
8976 MATERIAL sqm 300.00 1050.00 315000.00
0128 Details of Cost for 300 Sqm day day day 0.36 714.00 31500.00
0114 Synthetic Geogrid having umtimate tensile strength 1200 kN/m 6.00 645.00 257.04
0139 Add 10 per cent of the cost of reinforcing elements (synthetic geogrids) 3.00 714.00 3870.00
for wastage and accessories like tie-strips, nuts and bolts and loops/lugs 2142.00
for joining reinforcing elements with the facia pannels, overlaps and other 352769.04
protective elements for synthetic geogrids and all other activities required 3527.69
to complete the item in all respect including taxes and transportation. 10% 356296.73
of "P" 50059.69
LABOUR 406356.42
Mate Beldar 60953.46
Skilled Beldar TOTAL 467309.88
Add 1 % Water charges on "W" TOTAL 4673.10
Add GST on "X" (multiplying factor 0.1405) TOTAL 471982.98
Add 15% CPOH on "Y" TOTAL 1573.28
Add Cess @ 1% on "Z" Cost for 300 Sqm 1573.30
Cost per Sqm
say

26.19 Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conformi
1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto re
in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction o
in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where require
excluding the cost of purlins, rafters and trusses.
26.19.1 0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.

Code Description Unit Quantity Rate Rs. Amount Rs.


8977 Details of cost for 216.14 sqm sqm L.S. 230.12 600.00 138072.00
9999 Consider a shed of 20x10 metres. (External dimensions of plinth). 10 Nos 104.00 2.12 220.48
1023 Area of roof- 20.20x10.70m = 216.14 sqm. MATERIAL: 100 Nos 47.60 120.00 5712.00
1208 Sheets used = 20 Nosx10.70mx1.044m = 223.42 sqm, Add 3% wastage 100 Nos L.S. 4.76 30.00 142.80
1209 = 6.70 sqm,Total = 230.12sqm L.S. 4.76 35.00 166.60
9999 Aluminium profile sheet 0.71 mm Carriage of sheets day day day 8.06 2.12 17.09
9999 Galvanised steel J or L hooks 8 mm dia Bitumen washer 39.52 2.12 83.78
0130 G.I. plain washer thick 2.34 784.00 1834.56
0112 Carriage of bolts and nuts, washers etc. Sundries 9.34 714.00 6668.76
0114 LABOUR: 9.34 645.00 6024.30
Mistry 158942.37
Carpenter 2nd class Beldar 1589.42
TOTAL 160531.79
Add 1 % Water charges on "W" TOTAL 22554.72
Add GST on "X" (multiplying factor 0.1405) TOTAL 183086.51
Add 15% CPOH on "Y" TOTAL 27462.98
Add Cess @ 1% on "Z" Cost of 216.14 sqm Cost of 1 sqm 210549.49
Say 2105.49
212654.98
983.88
983.90

26.19.2 0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.

Code Description Unit Quantity Rate Rs. Amount Rs.


8978 Details of cost for 216.14 sqm sqm L.S. 230.12 785.00 180644.20
9999 Consider a shed of 20x10 metres. (External dimensions of plinth). 10 Nos 104.00 2.12 220.48
1023 Area of roof- 20.2x10.70m = 216.14 sqm. MATERIAL: 100 Nos 47.60 120.00 5712.00
1208 Sheets used = 20 Nosx10.70mx1.044m = 223.42 sqm, Add 3% wastage 100 Nos L.S. 4.76 30.00 142.80
1209 = 6.70 sqm, Total = 230.12sqm L.S. 4.76 35.00 166.60
9999 Aluminium profile sheet 0.91 mm Carriage of sheets day day day 8.06 2.12 17.09
9999 Galvanised steel J or L hooks 8 mm dia Bitumen washer 39.52 2.12 83.78
0130 G.I. plain washer thick 2.34 784.00 1834.56
0112 Carriage of bolts and nuts, washers etc. Sundries 9.34 714.00 6668.76
0114 LABOUR: 9.34 645.00 6024.30
Mistry 201514.57
Carpenter 2nd class Beldar 2015.15
TOTAL 203529.72
Add 1 % Water charges on "W" TOTAL 28595.92
Add GST on "X" (multiplying factor 0.1405) TOTAL 232125.64
Add 15% CPOH on "Y" TOTAL 34818.85
Add Cess @ 1% on "Z" Cost of 216.14 sqm Cost of 1 sqm 266944.49
Say 2669.44
269613.93
1247.40
1247.40

26.22 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm
texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron
0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32
length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalv
steel items
(galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of si
76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size
if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl p
center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge.
26.22.1 With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles

Code Description Unit Quantity Rate Rs. Amount Rs.


8589 Details of cost for 100 sqm sqm 105.00 685.00 71925
8590 MATERIAL each each 29.50 140.00 3540
8591 Calcium Slicate tegular edged Flase ceiling tiles 595x595 mm and 15 mm each each 13.50 90.00 877.5
8592 thick each 147.00 45.00 5880
8593 Ceiling Area = 100 sqm + Add 5% wastage = 5 sqm. Total = 105 sqm each each 147.00 22.00 2940
8588 Galavanised iron main Tee ceiling section Size 24x38x0.33 mm (3 metre each 100 nos. 72.00 28.00 1872.00
5775 long) including wastage @ 10% L.S. 72.00 15.00 864.00
5776 Galavanised iron perimeter wall Angle Size 24x24x0.40 mm (3.00 metre L.S. 72.00 35.00 2304
5777 long) including wastage @ 10% L.S. 72.00 12.00 576
8211 Galavanised iron intermediate cross T section Size 24x32x0.33 mm (1.2 day day 1.00 250.00 215
9999 metre long) including wastage @ 10% 498.65 2.12 997.3
9977 Glavanised iron intermediate cross T section Size 24 x 32x 237.48 2.12 474.96
9999 0.33 mm (0.6 metre long) 310.70 2.12 621.4
0111 Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000 mm 28.00 784.00 20664
0114 length 23.00 645.00 12834
Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mm 126585.16
12x50 mm long dash fastener 1265.85
Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on 127851.01
both 25 mm flange 17963.07
40 mm long S.S screws with plastic rawl plugs Scaffolding etc. 145814.08
Carriage of materails etc. Sundries 21872.11
LABOUR 167686.19
Carpenter 1st class Beldar 1676.86
TOTAL 169363.05
Add 1 % Water charges on "W" TOTAL 1693.63
Add GST on "X" (multiplying factor 0.1405) TOTAL 1693.65
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 100 sqm.
Cost of 1 cum.
Say

26.22.2 With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-
Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21

Code Description Unit Quantity Rate Rs. Amount Rs.


5778 Details of cost for 100 sqm sqm 105.00 830.00 81375
8590 MATERIAL each each 29.50 140.00 3540.00
8591 15 mm thick tegular/butt edged without perforation plain/designer light each each 13.50 90.00 877.5
8592 weight calcium silicate Anti-Microbial Bio- Safe coated false ceiling tiles of each 147.00 45.00 5880
8593 size 595x595mm each each 147.00 22.00 2940
8588 Ceiling Area = 100 sqm + Add 5% wastage = 5 sqm. Total = 105 sqm each 100 nos. 72.00 28.00 1872.00
5775 Galavanised iron main Tee ceiling section Size 24x38x0.33 mm (3 metre L.S. 72.00 15.00 864.00
5776 long) including wastage @ 10% L.S. 72.00 35.00 2304
5777 Galavanised iron perimeter wall Angle Size 24x24x0.40 mm (3.00 metre L.S. 72.00 12.00 576
8211 long) including wastage @ 10% day day 1.00 250.00 215
9999 Galavanised iron intermediate cross T section Size 24x32x0.33 mm (1.2 498.65 2.12 997.3
9977 metre long) including wastage @ 10% 237.48 2.12 474.96
9999 Glavanised iron intermediate cross T section Size 24 x 32x 310.70 2.12 621.4
0111 0.33 mm (0.6 metre long) 28.00 784.00 20664
0114 Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000 mm 23.00 645.00 12834
length 136035.16
Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mm 1360.35
12x50 mm long dash fastener 137395.51
Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on 19304.07
both 25 mm flange 156699.58
40 mm long S.S screws with plastic rawl plugs Scaffolding etc. 23504.94
Carriage of materails etc. Sundries 180204.52
LABOUR 1802.05
Carpenter 1st class Beldar 182006.56
TOTAL 1820.07
Add 1 % Water charges on "W" TOTAL 1820.05
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 100 sqm.
Cost of 1 cum.
Say
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 100 sqm.
Cost of 1 cum.
Say

26.23 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler fals
tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 82
Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistanc
thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid
dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile
(white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and second
intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanise
items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto
length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be
periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall b
out as per specifications, drawing and as per directions of the
Engineer-in-Charge.

26.23.1 With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
Code Description Unit Quantity Rate Rs. Amount Rs.
8563 Details of cost for 100 sqm MATERIAL sqm 105.00 725.00 76125.00
8567 15 mm thick, light weight, integral densified micro look edged,false ceiling each 13.50 125.00 1687.50
8566 tiles of size 595x595 mm. each 29.50 260.00 7670.00
8568 Celling Area = 100 sqm + Add 5% wastage = 5 sqm. Total = 105 sqm each 147.00 105.00 15435.00
8569 SILHOUETTE Profile grid frame : each 147.00 50.00 7350.00
8588 Galvanized mild steel perimeter wall angle 22x19x0.40 mm (3000 mm each each 72.00 28.00 2016.00
8619 long) each 72.00 15.00 1080.00
8515 including wastage @10% 100 nos L.S. 72.00 42.00 3024.00
8211 Powder coated steel section main-T ceiling sections 15x42x0.40 mm L.S. 1.00 250.00 250.00
9999 (3000 mm long) L.S. 498.65 2.12 1057.14
9977 including wastage @10% day day 237.48 2.12 503.46
9999 Powder coated Galvanised Iron intermediate cross-T section 15x42x0.40 310.70 2.12 658.68
0111 mm (1200 mm long) 28.00 784.00 21952.00
0114 including wastage @10% 23.00 645.00 14835.00
Powder coated Galvanized Iron intermediate cross-T section 153643.78
15x42x0.40mm (600 mm long ) 1536.44
including wastage @10% 155180.22
Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000 mm 21802.82
length 176983.04
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galavanised 26547.46
MS 8 mm outer diameter M-6 dash fastener 50mm long 203530.49
40 mm long S.S screws with plastic rawl plugs Scaffolding etc. 2035.30
Carriage of materials etc. Sundries 205565.80
LABOUR 2055.66
Carpenter 1st class Beldar 2055.65
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 100 sqm.
Cost of 1 sqm.
Say
26.24 Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595
NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:4
fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, compris
frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm includi
sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel
section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fas
10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm
of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with sel
pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints
panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wid
metre )roll and two coats of primer suitable for panelling as per
manufacturer's specification as per direction of Engineer-in-Charge all complete.

26.24.1 With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles
Code Description Unit Quantity Rate Rs. Amount Rs.
8564 Details of cost for 6.00 x 3.65=21.90 sqm MATERIAL sqm 23.00 900.00 20700.00
7367 15 mm thick, light weight,fully perforated square/butt edge integral metre 12.60 60.00 756.00
7369 densified,false ceiling tiles of size 595x595 mm. metre 73.66 70.00 5156.20
7025 Ceiling area = 21.90 sqm + 1.10 sqm (Add 5% wastage) Total = 1000 Nos 0.392 480.00 188.16
7383 23.00 sqm each sqm 19.00 7.00 133.00
7274 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size kg 23.00 200.00 4600.00
0764 50x32 mm each roll L.S. 4.82 26.00 125.32
7026 2 x 6.00 m=12m +0.60 (Add 5% wastage ) = 12.60 m Galvanised M.S. L.S. 0.27 150.00 40.50
9999 sheet 0.50 mm thick pressed stud : 48x34x36 mm day day day 130.00 2.12 275.60
9977 11 x 3.65 m = 40.15 m + 5 x 6.00 = 30.00 m day 52.00 2.12 110.24
0111 Total= 70.15 m +3.51 ( Add 5% wastage ) Total = 73.66m 6.57 784.00 5150.88
0112 Self tapping pan head nickle coated mild steel screws of size 13 x 3.2 mm 2.847 714.00 2032.76
0114 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastner 7.665 645.00 4943.93
0131 Glass wool 50 mm thick 1.095 714.00 781.83
21.90 +1.10 (Add 5% wastage) = 23.00 sqm 44994.41
Calcium silicate base compound for jointing calcium silicate tiles 449.94
22.81/103.68 x 21.9 = 4.82 kgs 45444.36
Fibre joint tape 50 mm wide (90 metre) roll 1.27/103.68 x 21.90 = 0.27 roll 6384.93
Sundries such as scaffolding, tools, bits, etc. Carriage of materials etc. 51829.29
LABOUR 7774.39
Carpenter 1st class 0.30x21.90=6.57 days 59603.68
Carpenter 2nd class 0.13x21.90=2.847 days 596.04
Beldar 0.35x21.90=7.665 days 60199.72
Painter TOTAL 2748.85
Add 1 % Water charges on "W" TOTAL 2748.85
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 21.90 sqm.
Cost of 1 sqm.
Say
26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre a
filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minim
IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humi
resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting
sections and Lsections suitably fixed
according to tile size as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8589 Details of cost for 10 Sqm MATERIAL sqm L.S. 10.50 685.00 7192.50
9977 Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick day day L.S. 14.95 2.12 31.69
0111 10 + 0.5 (Add wastage @5%) = 10.5 sqm Carriage L.S. 2.50 784.00 1960.00
0114 LABOUR 2.00 645.00 1290.00
9999 Carpenter 1st class Beldar 31.07 2.12 65.87
9999 Scaffolding Sundries TOTAL 31.07 2.12 65.87
Add 1 % Water charges on "W" TOTAL 10605.93
Add GST on "X" (multiplying factor 0.1405) TOTAL 106.06
Add 15% CPOH on "Y" TOTAL 10711.99
Add Cess @ 1% on "Z" Cost of 10 sqm 1505.03
Cost of 1 sqm 12217.02
Say 1832.55
14049.58
140.50
14190.07
1419.01
1419.00

26.26 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm
approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:19
combustible as per BS 476 (part 4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- lock
Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T r
size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of
600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per s
mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of s
mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of
plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as
directions of the Engineer-in-Charge.

26.26.1 With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
Code Description Unit Quantity Rate Rs. Amount Rs.
8581 Details of cost for 100 sqm MATERIAL sqm each 105.00 550.00 57750.00
8555 Celling area =100 sqm each 29.50 190.00 5605.00
8591 Add wastage @ 5% = 5 sqm Total=105.00 sqm each 13.50 90.00 1215.00
8556 12 mm thick micro tegular edged semi perforated GFRG (Glass Fibre each 147.00 78.00 11466.00
8587 Reinforced Gypsum) false celing tiles of Size 595x595 mm each each 147.00 37.00 5439.00
8588 Galvanized iron main-T ceiling sections 15x32x0.33 mm (3000 mm long) each 72.00 28.00 2016.00
8619 Including wastage @ 10% 100 nos 72.00 15.00 1080.00
8596 Galvanized iron perimeter wall angle 24x24x0.40 mm (3000 mm long) L.S. 72.00 35.00 2520.00
8211 Including wastage @ 10% 1.00 250.00 250.00
9999 Galvanized iron intermediate cross-T section 15x32x0.33 mm (1200 mm 498.65 2.12 1057.14
long)
Including wastage @ 10%
Galvanized iron intermediate cross- T section 15x32x0.33 mm (600 mm
long)
Including wastage @ 10%
Galavanised MS hanger rod 6mm dia MS fully threaded up to 1000 mm
length
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galvanised
MS 8mm outer diameter M-6 dash fastener 25mm long
40mm SS with plastic rawl plugs
Scaffolding etc.

9977 Carriage of materials etc. Sundries L.S. 237.48 2.12 503.46


9999 LABOUR L.S. 310.70 2.12 658.68
0111 Carpenter 1st class Beldar day day 28.00 784.00 21952.00
0114 TOTAL 23.00 645.00 14835.00
Add 1 % Water charges on "W" TOTAL 126347.28
Add GST on "X" (multiplying factor 0.1405) TOTAL 1263.47
Add 15% CPOH on "Y" TOTAL 127610.75
Add Cess @ 1% on "Z" Cost of 100 sqm 17929.31
Cost of 1 sqm 145540.06
Say 21831.01
167371.07
1673.71
169044.78
1690.45
1690.45

26.26.2 With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Code Description Unit Quantity Rate Rs. Amount Rs.


8582 Details of cost for 100 sqm MATERIAL sqm each 105.00 600.00 63000.00
8555 Celling area =100 sqm each 29.50 190.00 5605.00
8591 Add wastage @ 5% = 5 sqm Total=105.00 sqm each 13.50 90.00 1215.00
8556 12 mm thick micro tegular edged fully perforated GFRG (Glass Fibre each 147.00 78.00 11466.00
8587 Reinforced Gypsum) false celing tiles of Size 595x595 mm each each 147.00 37.00 5439.00
8588 Galvanized iron main-T ceiling sections 15x32x0.33 mm (3000 mm long) each 72.00 28.00 2016.00
8619 Including wastage @ 10% 100 nos L.S. 72.00 15.00 1080.00
8596 Galvanized iron perimeter wall angle 24x24x0.40 mm (3000 mm long) L.S. 72.00 35.00 2520.00
8211 Including wastage @ 10% L.S. 1.00 250.00 250.00
9999 Galvanized iron intermediate cross- T section 15x32x0.33 mm (1200 mm day day 498.65 2.12 1057.14
9977 long) 237.48 2.12 503.46
9999 Including wastage @ 10% 310.70 2.12 658.68
0111 Galvanized iron intermediate cross-T section 15x32x0.33 mm (600 mm 28.00 784.00 21952.00
0114 long) 23.00 645.00 14835.00
Including wastage @ 10% 131597.28
Galavanised MS hanger rod 6mm dia MS fully threaded up to 1000 mm 1315.97
length 132913.25
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galvanised 18674.31
MS 8mm outer diameter M-6 dash fastener 25mm long 151587.56
40mm long SS screws with plastic rawl plugs Scaffolding etc. 22738.13
Carriage of materials etc. Sundries 174325.70
LABOUR 1743.26
Carpenter 1st class Beldar 176068.96
TOTAL 1760.69
Add 1 % Water charges on "W" TOTAL 1760.70
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 100 sqm
Cost of 1 sqm
Say

26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,
design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057
Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron secti
mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 m
secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using
mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 10
length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periph
/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of p
plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling supp
shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per dire
the engineer-in-charge.
26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Code Description Unit Quantity Rate Rs. Amount Rs.


8552 Details of cost for 100 Sqm MATERIAL sqm 105.00 835.00 87675.00
8555 Mineral fibre beveled tegular edged ceiling tiles 595x595 mm, 16 mm each 29.50 190.00 5605.00
8556 thick each each 147.00 78.00 11466.00
8557 Area = 100 sqm + 5 sqm (Add for wastage @5%) Total = 105 sqm each 147.00 35.00 5145.00
8591 G.I. main runner 15X32mm of 3000 mm length, 0.33mm thick each each 13.50 90.00 1215.00
8558 including 10 % wastage each 72.00 26.00 1872.00
8619 G.I. cross Tee 15X32mm of 1200mm length 0.33mm thick including 10 % 100 nos L.S. 72.00 15.00 1080.00
8515 wastage L.S. 72.00 42.00 3024.00
8211 G.I. cross Tee 15X32mm of 600mm length, 0.33 mm thick including 10 % day day 1.00 250.00 250.00
9999 wastage 187.95 2.12 398.45
9977 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 89.35 2.12 189.42
0111 metre long) 28.00 784.00 21952.00
0114 including 10 % wastage 23.00 645.00 14835.00
Galvanised Iron hanger rod 6mm dia fully threaded upto 1000mm length 154706.88
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galavanised 1547.07
MS 8 mm outer diameter M-6 dash fastener 50mm long 156253.94
40 mm long S.S screws with plastic rawl plugs Sundries i.e. scaffolding 21953.68
etc 178207.62
Carriage of material etc. LABOUR 26731.14
Carpenter 1st class Beldar 204938.77
TOTAL 2049.39
Add 1 % Water charges on "W" TOTAL 206988.16
Add GST on "X" (multiplying factor 0.1405) TOTAL 2069.88
Add 15% CPOH on "Y" TOTAL 2069.90
Add Cess @ 1% on "Z" Cost of 100 sqm
Cost of 1 sqm
Say

26.27.2 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)

Code Description Unit Quantity Rate Rs. Amount Rs.


8554 Details of cost for 100 Sqm MATERIAL sqm 105.00 1045.00 109725.00
8555 Mineral fibre beveled tegular edged ceiling tiles 595x595mm, 20 mm thick each 29.50 190.00 5605.00
8556 Area = 100 sqm + 5 sqm (Add for wastage @5%) Total = 105 sqm each each 147.00 78.00 11466.00
8587 G.I. main runner 15X32mm of 3000 mm length, 0.33mm thick each 147.00 37.00 5439.00
8591 including 10 % wastage each 13.50 90.00 1215.00
8558 G.I. cross Tee 15X32mm of 1200mm length 0.33mm thick including 10 % each each 100 72.00 26.00 1872.00
8619 wastage nos L.S. 72.00 15.00 1080.00
8596 G.I. cross Tee 15X32mm of 600mm length, 0.33 mm thick including 10 % L.S. 72.00 35.00 2520.00
8211 wastage day day 1.00 250.00 250.00
9999 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 187.95 2.12 398.45
9977 metre long) 89.35 2.12 189.42
0111 including 10 % wastage 28.00 784.00 21952.00
0114 Galvanised Iron hanger rod 6mm dia fully threaded upto 1000mm length 23.00 645.00 14835.00
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galavanised 176546.88
MS 8 mm outer diameter 50mm long 1765.47
40 mm long S.S screws with plastic rawl plugs 178312.34
Sundries i.e. scaffolding etc Carriage of material etc. 25052.88
LABOUR 203365.23
Carpenter 1st class Beldar 30504.78
TOTAL 233870.01
Add 1 % Water charges on "W" TOTAL 2338.70
Add GST on "X" (multiplying factor 0.1405) TOTAL 236208.71
Add 15% CPOH on "Y" 2362.09
TOTAL 2362.10
Add Cess @ 1% on "Z" Cost of 100 sqm
Cost of 1 sqm Say

26.27.3 With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class
100 ) specifications

Code Description Unit Quantity Rate Rs. Amount Rs.


8553 Details of cost for 100 Sqm MATERIAL sqm 105.00 925.00 97125.00
8555 Mineral fibre beveled tegular edged ceiling tiles 595x595 mm, 16 mm each 29.50 190.00 5605.00
8556 thick with bioblock, confirming to ISO 5 (class 100) specifications each each 147.00 78.00 11466.00
8557 Area = 100 sqm + 5 sqm (Add for wastage @5%) Total = 105 sqm each 147.00 35.00 5145.00
8591 G.I. main runner 15X32mm of 3000 mm length, 0.33mm thick each each 13.50 90.00 1215.00
8558 including 10 % wastage each 72.00 26.00 1872.00
8619 G.I. cross Tee 15X32mm of 1200mm length 0.33mm thick including 10 % 100 nos L.S. 72.00 15.00 1080.00
8596 wastage L.S. 72.00 35.00 2520.00
8211 G.I. cross Tee 15X32mm of 600mm length,0.33 mm thick including 10 % day day 1.00 250.00 250.00
9999 wastage 187.95 2.12 398.45
9977 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 89.35 2.12 189.42
0111 metre long) 28.00 784.00 21952.00
0114 including 10 % wastage 23.00 645.00 14835.00
Galvanised Iron hanger rod 6mm dia fully threaded upto 1000mm length 163652.88
Galavanised MS L-shape level adjuster of size 85x25x2 mm Galavanised 1636.53
MS 8 mm outer diameter M-6 dash fastener 50mm long 165289.40
40 mm long S.S screws with plastic rawl plugs Sundries i.e. scaffolding 23223.16
etc 188512.57
Carriage of material etc. LABOUR 28276.88
Carpenter 1st class Beldar 216789.45
TOTAL 2167.89
Add 1 % Water charges on "W" TOTAL 218957.35
Add GST on "X" (multiplying factor 0.1405) TOTAL 2189.57
Add 15% CPOH on "Y" TOTAL 2189.55
Add Cess @ 1% on "Z" Cost of 100 sqm
Cost of 1 sqm
Say

26.28 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power d
percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed
surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Ch
26.28.1 75mm average thickness

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Details of cost for One Sqm L.S. 5.60 2.12 11.87
0157 75mm average thickness for beams MACHINERY day day 0.20 784.00 156.80
0114 Hire charges for HILTY-TE 504 Pneumatic Chisel LABOUR 0.10 645.00 64.50
Machine Operator Beldar 233.17
TOTAL 2.33
Add 1 % Water charges on "W" TOTAL 235.50
Add GST on "X" (multiplying factor 0.1405) TOTAL 33.09
Add 15% CPOH on "Y" TOTAL 268.59
Add Cess @ 1% on "Z" Cost of 1.0 sqm 40.29
Say 308.88
3.09
311.97
311.95

26.28.2 50mm average thickness


Code Description Unit Quantity Rate Rs. Amount Rs.
9999 Details of cost for One Sqm L.S. 3.74 2.12 7.93
0157 50mm average thickness for beams MACHINERY day day 0.134 784.00 105.06
0114 Hire charges for HILTY-TE 504 Pneumatic Chisel LABOUR 0.07 645.00 45.15
Machine Operator Beldar 158.13
TOTAL 1.58
Add 1 % Water charges on "W" TOTAL 159.72
Add GST on "X" (multiplying factor 0.1405) TOTAL 22.44
Add 15% CPOH on "Y" TOTAL 182.16
Add Cess @ 1% on "Z" Cost of 1.0 sqm 27.32
Say 209.48
2.09
211.57
211.55

26.28.3 25 mm average thickness

Code Description Unit Quantity Rate Rs. Amount Rs.


9999 Details of cost for One Sqm L.S. 1.87 2.12 3.96
0157 25mm average thickness for beams MACHINERY day day 0.07 784.00 54.88
0114 Hire charges for HILTY-TE 504 Pneumatic Chisel LABOUR 0.03 645.00 19.35
Machine Operator Beldar 78.19
TOTAL 0.78
Add 1 % Water charges on "W" TOTAL 78.98
Add GST on "X" (multiplying factor 0.1405) TOTAL 11.10
Add 15% CPOH on "Y" TOTAL 90.07
Add Cess @ 1% on "Z" Cost of 1.0 sqm 13.51
Say 103.58
1.04
104.62
104.60

26.29 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemica
remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly w
water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
26.29.1 Bars upto 12 mm diameter

Code Description Unit Quantity Rate Rs. Amount Rs.


7911 Detail of cost for 3.00 sqm (95.54 meter length of 10 mm dia bar) Bars litre 1.00 245.00 245.00
0131 upto 12 mm diameter day day L.S. 0.162 714.00 115.67
0115 (1 litre chemical shall cover 3.00 sqm area of bars) MATERIALS L.S. 0.162 645.00 104.49
9999 Chemical Rust Remover LABOUR 3.162 2.12 6.70
9999 (Application charges for 3.0 sqm) Painter 1.98 2.12 4.20
Coolie 476.06
Putty, brush, sand paper Sundries 4.76
TOTAL 480.82
Add 1 % Water charges on "W" TOTAL 67.56
Add GST on "X" (multiplying factor 0.1405) TOTAL 548.37
Add 15% CPOH on "Y" TOTAL 82.26
Add Cess @ 1% on "Z" 630.63
Cost of 3 sqm (95.54 m length of 10 mm dia bar) Rate per meter length of 6.31
bar 636.94
Say 6.67
6.65

26.29.2 Bars above 12 mm diameter


Code Description Unit Quantity Rate Rs. Amount Rs.
7911 Detail of cost for 3.00 sqm (47.78 meter length of 20 mm dia bar) Bars litre 1.00 245.00 245.00
0131 above 12 mm diameter day day L.S. 0.162 714.00 115.67
0115 (1 litre chemical shall cover 3.00 sqm area of bars) MATERIALS L.S. 0.162 645.00 104.49
9999 Chemical Rust Remover LABOUR 3.162 2.12 6.70
9999 (Application charges for 3.0 sqm) Painter 1.98 2.12 4.20
Coolie 476.06
Putty, brush, sand paper Sundries 4.76
TOTAL 480.82
Add 1 % Water charges on "W" TOTAL 67.56
Add GST on "X" (multiplying factor 0.1405) TOTAL 548.37
Add 15% CPOH on "Y" TOTAL 82.26
Add Cess @ 1% on "Z" 630.63
Cost of 3.00 sqm (47.78m length of 20 mm dia bar) Rate per meter length 6.31
of bar 636.94
Say 13.33
13.35

26.30 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm up
in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using e
anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In- Charge.
26.30.1 Upto and including 12mm dia.

Code Description Unit Quantity Rate Rs. Amount Rs.


7913 Details of cost for 10 holes MATERIAL kg 0.20 585.00 117.00
0088 Epoxy day 0.50 160.00 80.00
0116 Approx unit Weight of Epoxy= 2000kg/cum or 2gm/cucm Volume of day day 0.50 784.00 392.00
0114 Epoxy filled =3.14/4[(1.5)2-(1.2)2] x 15.5cm = 9.86cucm 0.50 645.00 322.50
Weight of Epoxy for 10 holes=10x9.86 x 2 = 197.20 gms say 200gms = 911.50
0.2 kg 9.12
MACHINERY 920.62
Hire charges of Drill machine upto 30 mm dia LABOUR 129.35
Fitter (grade 1) Beldar 1049.96
TOTAL 157.49
Add 1 % Water charges on "W" TOTAL 1207.46
Add GST on "X" (multiplying factor 0.1405) TOTAL 12.07
Add 15% CPOH on "Y" TOTAL 1219.53
Add Cess @ 1% on "Z" Rate for 10 holes 121.95
Rate for one hole 121.95
Say

26.31 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direct
Engineer-In-charge complete in all respect.
26.31.1 SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with
proportion of approved polymer

Code Description Unit Quantity Rate Rs. Amount Rs.


0367 Details of Cost for 10.00 Sqm bonding coat MATERIAL tonne kg 0.022 5000.00 110.00
7914 Portland Cement (OPC-43 grade) day day 2.20 175.00 385.00
0155 SBR Polymer L.S. 0.27 749.00 202.23
0115 @ 10% of cement weight= 22.00kgx10% =2.2 kg LABOUR 0.27 645.00 174.15
9999 Mason (average) Coolie 4.03 2.12 8.54
Scaffolding and sundries (8.06/2=4.03) TOTAL 879.92
Add 1 % Water charges on "W" TOTAL 8.80
Add GST on "X" (multiplying factor 0.1405) TOTAL 888.72
Add 15% CPOH on "Y" TOTAL 124.87
Add Cess @ 1% on "Z" Cost for 10.00 sqm Rate per sqm 1013.59
Say 152.04
1165.63
11.66
1177.28
117.73
117.75

26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
Code Description Unit Quantity Rate Rs. Amount Rs.
7913 Details of Cost for 2.20 Sqm Epoxy kg L.S. 1.00 585.00 585.00
9999 Application charge for applying bonding coat of Epoxy Cost of brushes L.S. 18.50 2.12 39.22
9999 etc. 8.40 2.12 17.81
TOTAL 642.03
Add 1 % Water charges on "W" TOTAL 6.42
Add GST on "X" (multiplying factor 0.1405) TOTAL 648.45
Add 15% CPOH on "Y" TOTAL 91.11
Add Cess @ 1% on "Z" Cost for 2.20 sqm 739.56
Rate per sqm 110.93
Say 850.49
8.50
858.99
390.45
390.45

26.32 Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 gra
sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Paym
this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping wit
metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30
N/Sqmm2).

26.32.1 12 mm average thickness.

Code Description Unit Quantity Rate Rs. Amount Rs.


3.9 Details of Cost for 10 Sqm MATERIAL cum kg 0.144 4355.20 627.15
7914 Cement mortar 1:4 (1 cement : sand) = 0.144 Cum Rate as per Item day day day 1.10 175.00 192.50
0155 No.3.9 of SH:MORTARS L.S. 0.67 749.00 501.83
0115 SBR Polymer 0.75 645.00 483.75
0101 Qty of cement in mortar= 0.144x0.38= 0.055 MT or 55kg @ 2% of weight 0.92 714.00 656.88
9999 of cement 55kgx2%=1.10 kg 12.61 2.12 26.73
LABOUR 2488.84
Mason (average) Coolie 24.89
Bhisti 2513.73
Scaffolding and sundries TOTAL 353.18
Add 1 % Water charges on "W" TOTAL 2866.91
Add GST on "X" (multiplying factor 0.1405) TOTAL 430.04
Add 15% CPOH on "Y" TOTAL 3296.95
Add Cess @ 1% on "Z" Cost for 10 sqm 32.97
Rate per sqm 3329.92
Say 332.99
333.00

26.32.2 25 mm average thickness in 2 layers.

Code Description Unit Quantity Rate Rs. Amount Rs.


3.9 Details of Cost for 10 Sqm MATERIAL cum kg 0.30 4355.20 1306.56
7914 Cement mortar 1:4 (1 cement : 4 coarse sand) day day day 2.28 175.00 399.00
0155 =(0.144/12)x25=0.30 Cum L.S. 0.94 749.00 704.06
0115 Rate as per Item No.3.9 of SH: MORTARS SBR Polymer 1.02 645.00 657.90
0101 Cement 0.30x0.38 = 0.114 MT OR 114 kg 1.01 714.00 721.14
9999 @ 2% of weight of cement 114kgx2% =2.28kg LABOUR 12.61 2.12 26.73
Mason (average) Coolie 3815.39
Bhisti 38.15
Scaffolding and sundries TOTAL 3853.55
Add 1 % Water charges on "W" TOTAL 541.42
Add GST on "X" (multiplying factor 0.1405) TOTAL 4394.97
Add 15% CPOH on "Y" TOTAL 659.25
Add Cess @ 1% on "Z" Cost for 10 sqm 5054.22
Rate per sqm 50.54
Say 5104.76
510.48
510.50

26.32.3 50 mm average thickness in 3 layers.


Code Description Unit Quantity Rate Rs. Amount Rs.
3.9 Details of Cost for 10 Sqm MATERIAL cum kg 0.60 4355.20 2613.12
7914 Cement mortar 1:4 (1 cement : 4 coarse sand) 0.144/12)x50= day day day 4.56 175.00 798.00
0155 0.60 Cum L.S. 1.88 749.00 1408.12
0115 Rate as per Item No.3.9 of SH: MORTARS SBR Polymer 2.04 645.00 1315.80
0101 Cement 0.60x0.38 = 0.228 MT OR 228 kg 2.02 714.00 1442.28
9999 @ 2% of weight of cement 228kgx2% =4.56 kg LABOUR 25.22 2.12 53.47
Mason (average) Coolie 7630.79
Bhisti 76.31
Scaffolding and sundries TOTAL 7707.09
Add 1 % Water charges on "W" TOTAL 1082.85
Add GST on "X" (multiplying factor 0.1405) TOTAL 8789.94
Add 15% CPOH on "Y" TOTAL 1318.49
Add Cess @ 1% on "Z" Cost for 10 sqm 10108.43
Rate per sqm 101.08
Say 10209.52
1020.95
1020.95

26.33 Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforc
concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and gr
aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.
Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Pla
rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering,
propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evalua
sounding/tapping with a blunt metal instrument)
26.33.1 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm area (0.5cum) cum 0.50 10080.15 5040.08
0009 M25 concrete 0.5 cum of concrete@ 330 kg/cum cum kg -0.50 210.00 -105.00
7914 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 3.30 175.00 577.50
Deduction of pumping charges 5512.58
Pumping charges of concrete including Hire charges of pump, piping work 4.73
& accessories etc. 5517.30
SBR Polymer 67.05
@2% of cement 165 kg = 165X2% = 3.3 kg TOTAL 5584.35
Add 1 % Water charges on "W-A" TOTAL 81.64
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 5665.99
Add 15% CPOH on "Y-A" TOTAL 6.26
Add Cess @ 1% on "Z-A" Cost of 10 sqm 5672.25
Cost of 1 sqm 567.23
Say 567.25

26.33.2 75mm thick in Grade M 25 with cement content not less than 330 kg per cum
Code Description Unit Quantity Rate Rs. Amount Rs.
5.33.2.1 Detail of cost for 10 sqm area (0.75cum) cum 0.75 10080.15 7560.11
0009 M25 concrete 0.75 cum of concrete@ 330 kg/cum cum kg -0.75 210.00 -157.50
7914 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 4.95 175.00 866.25
Deduction of pumping charges 8268.86
Pumping charges of concrete including Hire charges of pump, piping work 7.09
& accessories etc. 8275.95
SBR Polymer 100.58
@2% of cement 247.50 kg = 247.50X2% = 4.95 kg TOTAL 8376.53
Add 1 % Water charges on "W-A" TOTAL 122.46
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 8498.99
Add 15% CPOH on "Y-A" TOTAL 9.39
Add Cess @ 1% on "Z-A" Cost of 10 sqm 8508.38
Cost of 1 sqm 850.84
Say 850.85

26.34 Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concre
the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive stre
ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specif
thickness all-round existing core of RCC member.
Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for po
concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and
polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under t
shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt m
instrument)
26.34.1 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm area cum 0.50 10080.15 5040.08
0009 M25 concrete 0.5 cum of concrete with cement content 330 kg/cum cum kg -0.50 210.00 -105.00
7914 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 3.30 175.00 577.50
Pumping charges of concrete including Hire charges of pump, piping work 5512.58
& accessories etc. 4.73
SBR Polymer 5517.30
@2% of cement 165 kg = 165X2% = 3.3 kg TOTAL 67.05
Add 1 % Water charges on "W-A" TOTAL 5584.35
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 81.64
Add 15% CPOH on "Y-A" TOTAL 5665.99
Add Cess @ 1% on "Z-A" Cost of 10 sqm 6.26
Cost of 1 sqm 5672.25
Say 567.23
567.25

26.34.2 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm area (0.75cum) cum cum kg 0.75 10080.15 7560.11
0009 M25 concrete 0.75 cum of concrete with cement content 330 kg/cum -0.75 210.00 -157.50
7914 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 4.95 175.00 866.25
Pumping charges of concrete including Hire charges of pump, piping work 8268.86
& accessories etc. 7.09
SBR Polymer @2% of cement 247.50 kg = 247.50X2% = 4.95 kg 8275.95
TOTAL 100.58
Add 1 % Water charges on "W-A" TOTAL 8376.53
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 122.46
Add 15% CPOH on "Y-A" TOTAL 8498.99
Add Cess @ 1% on "Z-A" Cost of 10 sqm 9.39
Cost of 1 sqm 8508.38
Say 850.84
850.85

26.34.3 100mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm area (1.00 cum) cum 1.00 10080.15 10080.15
0009 M25 concrete 1.00 cum of concrete with cement content 330 kg/cum cum kg -1.00 210.00 -210.00
7914 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 6.60 175.00 1155.00
Pumping charges of concrete including Hire charges of pump, piping work 11025.15
& accessories etc. 9.45
SBR Polymer @2% of cement 330 kg = 330X2% = 6.6 kg TOTAL 11034.60
Add 1 % Water charges on "W-A" TOTAL 134.10
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 11168.70
Add 15% CPOH on "Y-A" TOTAL 163.28
Add Cess @ 1% on "Z-A" Cost of 10 sqm 11331.98
Cost of 1 sqm 12.52
Say 11344.50
1134.45
1134.45

26.35 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of
concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of En
Charge.
(The payment shall be made on the basis of actual weight of approved grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrin
in concrete/RCC work

Code Description Unit Quantity Rate Rs. Amount Rs.


7927 Detail of cost for 100 kg Acrylic polymer mixed cement grout kg 2.00 31.00 62.00
0367 MATERIAL tonne L.S. 0.10 5000.00 500.00
9977 Acrylic Polymer chemical for cracks L.S. 1.00 2.12 2.12
9999 Considering 1 kg of cement grout mixed with non shrink polymer day day day 2250.00 2.12 4770.00
0122 compound with cement @ 2% of cement 1.00 784.00 784.00
0157 Portland Cement (OPC-43 grade) Carriage of materials 1.00 784.00 784.00
0157 Injecting charges of Stirrer mixed polymer grout Gun, rubber, pipe and 1.00 784.00 784.00
other accessories hire charges of plant, machinery including necessary 7686.12
fuel and transportation of site 76.86
LABOUR 7762.98
Foreman Nozzleman Pump Operator TOTAL 1090.70
Add 1 % Water charges on "W" TOTAL 8853.68
Add GST on "X" (multiplying factor 0.1405) TOTAL 1328.05
Add 15% CPOH on "Y" TOTAL 10181.73
Add Cess @ 1% on "Z" Cost of 100 kg 101.82
Cost of 1 kg 10283.55
Say 102.84
102.85

26.35.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concr
work.

Code Description Unit Quantity Rate Rs. Amount Rs.


7914 Detail of cost for 100kg of SBR Polymer mixed cement grout MATERIAL kg tonne L.S. 2.00 175.00 350.00
0367 SBR Polymer for crack L.S. 0.10 5000.00 500.00
9977 Portland Cement (OPC-43 grade) Carriage of materials day day day 1.00 2.12 2.12
9999 Injecting charges of Stirrer mixed polymer grout Gun, rubber, pipe and 2250.00 2.12 4770.00
0122 other accessories hire charges of plant, machinery including necessary 1.00 784.00 784.00
0157 fuel and transportation of site Rs 4000/- per day including plant shall be 1.00 784.00 784.00
0157 used of doing approximate v Hence cost per sqm (4000/50 = 80) 1.00 784.00 784.00
LABOUR 7974.12
Foreman Nozzle Operator Pump Operator TOTAL 79.74
Add 1 % Water charges on "W" TOTAL 8053.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 1131.57
Add 15% CPOH on "Y" TOTAL 9185.43
Add Cess @ 1% on "Z" Cost of 100 kg 1377.81
Cost of 1 kg 10563.24
Say 105.63
10668.88
106.69
106.70

26.35.3 Epoxy injection grout in concrete/RCC work of approved make

Code Description Unit Quantity Rate Rs. Amount Rs.


7913 Details of cost for10kg Epoxy grout MATERIAL kg day 10.00 585.00 5850.00
0092 Epoxy day day L.S. 0.03 200.00 6.00
0114 Hire charges of Plant and machinery, it can inject - 350kg/day 0.06 645.00 38.70
0157 LABOUR 0.03 784.00 23.52
9999 Beldar 5.00 2.12 10.60
Nozzle Operator 5928.82
Sundries (gloves gogles etc.) TOTAL 59.29
Add 1 % Water charges on "W" TOTAL 5988.11
Add GST on "X" (multiplying factor 0.1405) TOTAL 841.33
Add 15% CPOH on "Y" TOTAL 6829.44
Add Cess @ 1% on "Z" Cost of 10 kg 1024.42
Cost of 1 kg 7853.85
Say 78.54
7932.39
793.24
793.25

26.36 Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fix
arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge.
26.36.1 Wooven PVC cloth

Code Description Unit Quantity Rate Rs. Amount Rs.


7915 Details of cost for 10 sqm MATERIAL sqm L.S. 10.00 25.00 250.00
9999 Wooven PVC cloth 11.00 2.12 23.32
Fixing double scaffolding outside Total Material 273.32
LABOUR 68.33
For fixing and removal after complete of work @25% TOTAL 341.65
Add 1 % Water charges on "W" TOTAL 3.42
Add GST on "X" (multiplying factor 0.1405) TOTAL 345.07
Add 15% CPOH on "Y" TOTAL 48.48
Add Cess @ 1% on "Z" Rate for 10 sqm 393.55
Rate for 1 sqm 59.03
Say 452.58
4.53
457.11
45.71
45.70

26.37 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sa
by and including cleaning with oil free air blast as per direction of
Engineer in charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


0089 Details of cost for 10 Sqm Machinery day day 0.70 400.00 280.00
0090 Hire charges of sand blasting equipment (14 sqm per day) Hire charges cum cum 0.70 500.00 350.00
0982 of compressor day L.S. 1.00 1500.00 1500.00
2203 Material 1.00 163.93 163.93
0114 Coarse sand (zone III) Carriage of coarse sand LABOUR 0.70 645.00 451.50
9999 Beldar Sundries TOTAL 10.00 2.12 21.20
Add 1 % Water charges on "W" TOTAL 2766.63
Add GST on "X" (multiplying factor 0.1405) TOTAL 27.67
Add 15% CPOH on "Y" TOTAL 2794.30
Add Cess @ 1% on "Z" Cost of 10 sqm 392.60
Cost of 1 sqm 3186.89
Say 478.03
3664.93
36.65
3701.58
370.16
370.15

26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum
characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in p
as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment und
shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt m
instrument.
26.38.1 25mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm cum 0.3125 10080.15 3150.05
0086 M25 concrete 0.25 cum of concrete@ 330 kg/cum day 0.25 4000.00 1000.00
0157 Cubical qty of concrete for 10 sqm = 10x1.00x0.025 = 0.25 cum day day day 0.40 784.00 313.60
0154 + Wastage 25%, = 0.25x25/100=0.0625 cum. Total=0.3125 cum day day 0.40 784.00 313.60
0124 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 0.40 714.00 285.60
0161 Machinary 0.80 645.00 516.00
0101 Compressor, gun, rubber pipes & other accessories- hire charge of plant 0.40 714.00 285.60
& machinery i/c necessary fuel 5864.45
(approx. 40 sqm area of shotcrete per day = 10/40 = 0.25 day) 27.14
Labour 5891.59
Operator (Pile/ Special machine) Nozzel man/ gun man 385.19
Mason (brick layer) 2nd class Helper (Technician) 6276.78
Bhisti TOTAL 469.01
Add 1 % Water charges on "W-A" TOTAL 6745.79
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 35.96
Add 15% CPOH on "Y-A" TOTAL 6781.74
Add Cess @ 1% on "Z-A" Cost of 10 sqm 678.17
Cost of 1 sqm 678.15
Say

26.38.2 50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm cum 0.625 10080.15 6300.09
0086 M25 concrete 0.5 cum of concrete@ 330 kg/cum day 0.40 4000.00 1600.00
0157 Cubical qty of concrete for 10 sqm = 10x1.00x0.050 = 0.50 cum day day day 0.40 784.00 313.60
0154 Wastage 25%, = 0.50x25/100=0.125 cum Total=0.625 cum day day 0.40 784.00 313.60
0124 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 0.40 714.00 285.60
0161 Machinary 0.80 645.00 516.00
0101 Compressor, gun, rubber pipes & other accessories- hire charge of plant 0.40 714.00 285.60
& machinery i/c necessary fuel 9614.49
(approx. 25 sqm area of shotcrete per day = 10/25 = 0.4 day) 33.14
Labour 9647.64
Operator (Pile/ Special machine) Nozzel man/ gun man 470.33
Mason (brick layer) 2nd class Helper (Technician) 10117.97
Bhisti TOTAL 572.68
Add 1 % Water charges on "W-A" TOTAL 10690.65
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 43.91
Add 15% CPOH on "Y-A" TOTAL 10734.55
Add Cess @ 1% on "Z-A" Cost of 10 sqm 1073.46
Cost of 1 sqm 1073.45
Say

26.38.3 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Code Description Unit Quantity Rate Rs. Amount Rs.


5.33.2.1 Detail of cost for 10 sqm cum 0.9375 10080.15 9450.14
0086 M25 concrete 0.75 cum of concrete@ 330 kg/cum day 0.665 4000.00 2660.00
0157 Cubical qty of concrete for 10 sqm = 10x1.00x0.075 = 0.75 cum day day day 0.40 784.00 313.60
0154 Wastage 25%, = 0.75x25/100=0.1875 cum Total=0.9375 cum day day 0.40 784.00 313.60
0124 Rate as per Item No.5.33.2.1 of SH: Reinforced Cement Concrete 0.40 714.00 285.60
0161 Machinary 0.80 645.00 516.00
0101 Compressor, gun, rubber pipes & other accessories- hire charge of plant 0.40 714.00 285.60
& machinery i/c necessary fuel 13824.54
(approx. 15 sqm area of shotcrete per day = 10/15 = 0.665 day) 43.74
Labour 13868.28
Operator (Pile/ Special machine) Nozzel man/ gun man 620.75
Mason (brick layer) 2nd class Helper (Technician) 14489.03
Bhisti TOTAL 755.83
Add 1 % Water charges on "W-A" TOTAL 15244.87
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 57.95
Add 15% CPOH on "Y-A" TOTAL 15302.82
Add Cess @ 1% on "Z-A" Cost of 10 sqm 1530.28
Cost of 1 sqm 1530.30
Say

26.39 Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling o
required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing
air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per
direction of Engineer-In-Charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7921 Details of cost for 20.00 Nos Hole MATERIAL ml 188.00 2.00 376.00
7922 Adhesive chemical each 1.00 500.00 500.00
7923 (750 mm deep & 20 mm Dia Hole) each each 20.00 45.00 900.00
7924 Volume of hole =20x(3.14/4)x2.00x2.00x7.5=471 cub cm. Adhesive @ day day day 20.00 10.00 200.00
0155 40% of 471 ml=188.40 ml, Say 188 ml 0.50 749.00 374.50
0115 Bit of drilling machine for Hole upto 30mm dia (One Bit done 20 Holes 0.50 645.00 322.50
0101 only) 0.50 714.00 357.00
GI injection nipple 12mm dia, 75mm long 3030.00
Blowing compressed air for cleaning holes upto 30mm dia LABOUR 30.30
Mason (average) Coolie 3060.30
Bhisti TOTAL 429.97
Add 1 % Water charges on "W" TOTAL 3490.27
Add GST on "X" (multiplying factor 0.1405) TOTAL 523.54
Add 15% CPOH on "Y" TOTAL 4013.81
Add Cess @ 1% on "Z" Cost of 20 Nos hole Cost of 1 hole 40.14
Say 4053.95
202.70
202.70

26.40 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly a
the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labou
plants as approved by
Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


7925 Details of cost for 10.00 sqm ( i.e 77.50 kg.) MATERIAL kg 1.55 80.00 124.00
0091 L shaped 100mm long, 10mm dia mild steel shear key each sqm 25.00 5.00 125.00
1021 key to be provided at 0.5 mtr centre to centre in each direction L.S. 10.50 430.00 4515.00
9977 Total no. of Shear key of MS Bar in 10sqm = 25 nos 25x0.10x0.617=1.55 day day 5.61 2.12 11.89
0103 kg 1.00 714.00 714.00
0114 Welding charges of shear key to existing reinforcement Hard drawn steel 1.00 645.00 645.00
wire fabric 6134.89
75x25mm, weight 7.75kg/sqm 75x25 mm = 10.00 sqm + Add 5% 61.35
wastage = 0.50 sqm Total = 10.50 sqm Carriage at site 6196.24
LABOUR 870.57
Blacksmith 2nd class Beldar 7066.81
TOTAL 1060.02
Add 1 % Water charges on "W" TOTAL 8126.84
Add GST on "X" (multiplying factor 0.1405) TOTAL 81.27
Add 15% CPOH on "Y" TOTAL 8208.10
Add Cess @ 1% on "Z" Cost of 10 sqm 820.81
Cost of 1 sqm 820.80
Say
26.41 Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structu
comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. Th
sheet shall be galvanized (AZ- 150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI
specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875- 1987, ISO 800-1984 and IS:801- 1975. Th
shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as
Pro- 11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty
Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped An
better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in re
length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be
centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or
condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All s
tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection o
& 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon stee
bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500
minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of botto
complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includ
concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described

Code Description Unit Quantity Rate Rs. Amount Rs.


8579 Details of cost for 1.00 Kg MATERIAL kg L.S. 1.05 140.00 147.00
9977 Cold form light gauge Steel C-section of thickness 0.75mm i/c zink kg 1.685 2.12 3.57
8580 coating/sliting etc. day day -0.05 18.00 -0.90
0103 = 1.00 + 0.05 (Add for wastage @5%) = 1.05 kg Carriage 0.01 714.00 7.14
0114 Deduct for 0.03 645.00 19.35
Scrap value wastage of cold form light gauge steel Labour for 176.16
assembling/ fixing etc 1.76
Blacksmith 2nd class Beldar 177.92
TOTAL 25.00
Add 1 % Water charges on "W" TOTAL 202.92
Add GST on "X" (multiplying factor 0.1405) TOTAL 30.44
Add 15% CPOH on "Y" TOTAL 233.36
Add Cess @ 1% on "Z" Cost for 1.00 kg 2.33
Say 235.69
235.70

26.42 Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with se
taping screws / fasteners @ 60cm c/c of approved make. A groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon base
The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying fr
mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling / taping screws / fa
60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for
seamless finish.(cost of frame work to be paid for separately)

26.42.1 Outer face: Outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, Type A, as
per IS:14862:2000 (high pressure steam cured) Inner Face :- 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick fi
board confirming to IS:14862:2000 of type B (High pressure
steam cured)

Code Description Unit Quantity Rate Rs. Amount Rs.


0238 Details of Cost for 10.00 Sqm MATERAILS Sqm each Sqm 11.00 470.00 5170.00
2636 Outer face: each Sqm 40.00 3.10 124.00
0240 6mm thick Type A fiber cement board 1x10 =10 Sqm + Sqm each 11.00 625.00 6875.00
2635 1.00 (Add for wastage @ 10%) Total = 11.00 Sqm Sqm each 40.00 3.15 126.00
Sub A/R 1 GI Screws of Gauge 10, length 45 mm for fixing cement fibre board Sqm 10.00 92.85 928.50
0239 to C section. day day 11.00 300.00 3300.00
2636 9 mm thick Type A fiber cement board 1x10=10 sqm +1 sqm (Add 40.00 3.10 124.00
7009 for wastage @10%) Total = 11.00 sqm 11.00 140.00 1540.00
2635 GI screws of gauge 10, length 25 mm for fixing cement 40.00 3.15 126.00
Sub A/R 2 fibre board to C section Tapping and finishing Cement board joints 10.00 243.75 2437.50
0112 Filling the Grove of 2 mm to 3 mm between 6 mm and 9 mm thick 2.00 714.00 1428.00
0114 cement bonded particle boards. 6.00 645.00 3870.00
Inner face : 26049.00
8 mm thick Type B fiber cement board 1x10 = 10 sqm 260.49
+1.00 (Add for wastage @ 10%) Total = 11.00 Sqm. 26309.49
GI screw of gauge 10, length 45 mm for fixing cement bonded 3696.48
particle board to C section 30005.97
12.5 mm thick tapered edge gypsum plain board 1x10 =10 sqm 4500.90
34506.87
+1.00 (Add for wastage @10%) Total = 11.00 sqm. 345.07
GI Screws of Gauge 10, length 25 mm for Gypsum board to C 34851.94
section. 3485.19
Filling the grove of 2 mm to 3 mm between 8 mm thick 3485.20
heavy duty cement fibre board and 12.5 mm thick gypsum plastic
board.
LABOUR
For cutting and fixing of cement and gypsum board Carpenter 2nd
class
Beldar
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say

26.42.2 Outer face: Outer face having 8 mm thick cement bonded particle Board fixed on 10 mm thick cement bonded
particle board. (Termite, Fire and Moisture Resistance) as per IS 14276:1995. Inner face:-12.5 mm thick gypsum
plaster board conforming to IS 2095:2011 fixed on 8 mm thick cement bonded particle board (Termite, fire and moisture resistance) confirming to IS:142

Code Description Unit Quantity Rate Rs. Amount Rs.


0243 Details of Cost for 10.00 Sqm MATERAILS Sqm each 11.00 215.00 2365.00
2636 Outer face : Sqm 40.00 3.10 124.00
0249 8mm thick Cement bonded particle board 1x10 =10 Sqm + each Sqm 11.00 475.00 5225.00
2635 1.00 (Add for wastage @ 10%) Total = 11.00 Sqm Sqm each 40.00 3.15 126.00
Sub A/R 1 GI Screws of Gauge 10, length 45 mm for fixing cement bonded Sqm each 10.00 92.85 928.50
0243 particle board to C section. Sqm 11.00 215.00 2365.00
2636 10 mm thick Cement Bonded particle board 1x10=10 sqm day day 40.00 3.10 124.00
7009 +1 sqm (Add for wastage @10%) Total = 11.00 sqm 11.00 140.00 1540.00
2635 GI screws of gauge 10, length 25 mm for fixing cement bonded 40.00 3.15 126.00
Sub A/R 2 particle board to C section Tapping and finishing Cement board 10.00 243.75 2437.50
0112 joints 2.00 714.00 1428.00
0114 Filling the Groove of 2mm to 3 mm between 8 mm and 10 mm 6.00 645.00 3870.00
thick cement bonded particle boards. 20659.00
Inner face : 206.59
8 mm thick cement bonded particle board 1x10 = 10 sqm 20865.59
+1.00 (Add for wastage @ 10%) Total = 11.00 Sqm. 2931.62
GI screw of gauge 10, length 45 mm for fixing cement bonded 23797.21
particle board to C section. 3569.58
27366.79
12.5 mm thick tapered edge gypsum plain board 1x10 =10 sqm 273.67
+1.00 (Add for wastage @10%) Total = 11.00 sqm. 27640.45
GI Screws of Gauge 10, length 25 mm for Gypsum board to C 2764.05
section. 2764.05
Filling the grove of 2 mm to 3 mm between 8 mm thick
cement bonded particle board and 12.5 mm thick gypsum plastic
board.
LABOUR
For cutting and fixing of cement and gypsum board Carpenter 2nd
class
Beldar
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say

Sub A/R-1 Filling the groove (i.e. 2-3mm gap between boards),taping and jointing of the first layer 6mm and 9mm
thick fiber cement boards with epoxy based sealing compound or with silicon sealant. Second layer is fixed over it in a stagg
pattern.

Code Description Unit Quantity Rate Rs. Amount Rs.


1248 Details of cost for 1 Sqm MATERIAL kg 0.14 535.00 74.90
0112 Epoxy based sealing Compound LABOUR day day 0.0132 714.00 9.42
0114 Carpenter 2nd class Beldar 0.0132 645.00 8.51
Cost of 1 sqm 92.84
Say 92.85
Sub A/R-2
Fill the groove (i.e. 2-3mm gap between boards),taping and jointing 8mm thick fiber cement board and
12.5mm thick gypsum plaster boards with epoxy based sealing compound, Acrylic based sealing compound, Non woven rein
Tape as per direction of Engineer in charge.(Use a flexible knife so that no air bubble is entrapped. Allow 1-2 hours gap. Once
or set, apply a coat of Acrylic based sealing compound paste to flash fill the beveled area. After 2-4 hours go on to repeat a s
with Acrylic based sealing compound to securely embed the 40mm width (non woven reinforcement Tape. Use only flexible s
such as provided with packs, to avoid air entrapment within compound. After overnight drying shrinkage apply a coat of acry
sealing compound to compensate shrinkage. Finally cover the bevel portion with any suitable overall skin coat with a desired
leveler material).

Code Description Unit Quantity Rate Rs. Amount Rs.


1248 Details of cost for 1 Sqm MATERIAL kg kg 0.14 535.00 74.90
1249 Epoxy based sealing Compound Acrylic based sealing compound Non metre 0.26 500.00 130.00
1250 woven reinforcement Tape LABOUR day day 25.00 0.14 3.50
0112 Carpenter 2nd class Beldar 0.026 714.00 18.56
0114 Cost of 1 sqm 0.026 645.00 16.77
Say 243.73
243.75

26.43 Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095
on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter s
of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy an
based jointing compound for seamless finish.(cost of frame work to be paid for separately
26.43.1 Cement Fiber Board 8 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured)

Code Description Unit Quantity Rate Rs. Amount Rs.


0239 Details of cost for 10 Sqm Material Sqm 22.00 300.00 6600.00
2635 8 mm thick Type B fiber cement board 2x10=20 sqm + each Sqm 80.00 3.15 252.00
0241 2.00 (Add for wastage @10 %) = 22.00 sqm each 22.00 170.00 3740.00
2635 GI screws of gauge 10, length 25 mm for fixing cement fiber board Sqm 80.00 3.15 252.00
Sub A/R 2 to C section Tapping and finishing Cement board joints. day day 10.00 243.75 2437.50
0112 12.5 mm thick Gypsum plaster board 2x10 = 20 sqm + 2.00(Add for 1.11 714.00 792.54
0114 wastage @ 10%) = 22.00 sqm 3.33 645.00 2147.85
GI screws of gauge 10, length 25 mm for fixing cement fiber board 16221.89
to C section Tapping and finishing Cement board joints. 162.22
Filling the grove of 2 mm to 3 mm between 8 mm thick 16384.11
cement bonded particle board and 12.5 mm thick gypsum plastic 2301.97
board. 18686.08
LABOUR (For cutting & fixing cement board and Gypsum board) 2802.91
21488.99
Carpenter 2nd class Beldar 214.89
TOTAL 21703.88
Add 1 % Water charges on "W" TOTAL 2170.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 2170.40
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say

26.43.2 Cement Bonded particle board 8 mm (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995

Code Description Unit Quantity Rate Rs. Amount Rs.


0243 Details of cost for 10 Sqm Material Sqm 22.00 215.00 4730.00
2635 8 mm thick cement bonded particle board 2x10=20 sqm + each Sqm 80.00 3.15 252.00
0241 2.00 (Add for wastage @10 %) = 22.00 sqm each 22.00 170.00 3740.00
2635 GI screws of gauge 10, length 25 mm for fixing cement bonded Sqm 80.00 3.15 252.00
Sub A/R 2 particle board to C section Tapping and finishing Cement board 10.00 243.75 2437.50
0112 joints. 1.11 714.00 792.54
12.5 mm thick Gypsum plaster board 2x10 = 20 sqm + 2.00(Add for
wastage @ 10%) = 22.00 sqm
GI screws of gauge 10, length 25 mm for fixing cement
bonded particle board to C section Tapping and finishing Cement
board joints.
Filling the grove of 2 mm to 3 mm between 8 mm thick cement
bonded particle board and 12.5 mm thick gypsum
plastic board.

LABOUR (For cutting & fixing cement board and Gypsum board)
Carpenter 2nd class day
0114 Beldar day 3.33 645.00 2147.85
TOTAL 14351.89
Add 1 % Water charges on "W" TOTAL 143.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 14495.41
Add 15% CPOH on "Y" TOTAL 2036.60
Add Cess @ 1% on "Z" Cost of 10 sqm 16532.01
Cost of 1 sqm 2479.80
Say 19011.82
190.12
19201.93
1920.19
1920.20

26.44 Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Bui
2009 complete as per direction of Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


2637 Details of cost for 10.00 Sqm MATERIAL sqm 11.00 180.00 1980.00
0112 Vapour barrier day day 0.22 714.00 157.08
0114 10.00 sqm + 1.00 sqm (Add for wastage @10%) = 11.00 sqm 0.22 645.00 141.90
LABOUR 2278.98
For fixing fixing 45 sqm vapour barrier Carpenter 2nd class 22.79
Beldar TOTAL 2301.77
Add 1 % Water charges on "W" TOTAL 323.40
Add GST on "X" (multiplying factor 0.1405) TOTAL 2625.17
Add 15% CPOH on "Y" TOTAL 393.78
Add Cess @ 1% on "Z" Cost of 10 sqm 3018.94
Cost of 1.00 sqm 30.19
Say 3049.13
304.91
304.90

26.45 Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self- drilling / taping screws. Screw
counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of
length varying from 25 to 45 mm.

26.45.1
Cement Fiber Board 6 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured)

Code Description Unit Quantity Rate Rs. Amount Rs.


0238 Details of cost for 10 Sqm Material Sqm 11.00 470.00 5170.00
2635 6 mm thick fibre cement board 10 sqm +1 sqm (Add for wastage each Sqm 40.00 3.15 126.00
Sub A/R 1 @10%)=11.00 sqm day day 10.00 92.85 928.50
0112 GI screws of gauge 10, length 25 mm for fixing cement 1.11 714.00 792.54
0114 fibre board to C section Tapping and finishing Cement board joints 3.33 645.00 2147.85
Filling the Grove of 2 mm to 3 mm between 6 mm and 10 mm thick 9164.89
cement bonded particle boards. 91.65
LABOUR 9256.54
For cutting and fixing of Cement & gypsum board Carpenter 2nd 1300.54
class 10557.08
Beldar 1583.56
12140.65
TOTAL
121.41
Add 1 % Water charges on "W" TOTAL
12262.05
Add GST on "X" (multiplying factor 0.1405) TOTAL
1226.21
Add 15% CPOH on "Y" TOTAL
1226.20
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say

26.45.2 Cement Bonded particle board 8 mm thick (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995

Code Description Unit Quantity Rate Rs. Amount Rs.


0243 Details of cost for 10 Sqm Material Sqm 11.00 215.00 2365.00
2635 8 mm thick cement bonded particle board 10 sqm +1 sqm each Sqm 40.00 3.15 126.00
Sub A/R 1 (Add for wastage @10%)=11.00 sqm day day 10.00 92.85 928.50
0112 GI screws of gauge 10, length 25 mm for fixing cement bonded 1.11 714.00 792.54
0114 particle board to C section Tapping and finishing Cement board 3.33 645.00 2147.85
joints 6359.89
Filling the Grove of 2 mm to 3 mm between 6 mm and 10 mm thick 63.60
cement bonded particle boards. 6423.49
LABOUR 902.50
For cutting and fixing of Cement & gypsum board Carpenter 2nd 7325.99
class 1098.90
8424.89
Beldar 84.25
TOTAL 8509.14
Add 1 % Water charges on "W" TOTAL 850.91
Add GST on "X" (multiplying factor 0.1405) TOTAL 850.90
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say
26.46 Providing and fixing in position, 200 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of E
sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric m
be made of 3 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall, kept at 120-135 mm gap and con
the zig zag G.I. wire of 3 mm dia at alternate row by welding (at an angle ranging from 50-70 degree) . The EPS core shall consist of 100 mm
of density not less than 20 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 50 mm thick cement mo
cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at
not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as
drawings and specifications and under the overall direction of the Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8013 Details of cost for 1.20x3.00m= 3.60 sqm MATERIAL sqm 3.78 1650.00 6237.00
9999 Factory made EPS Core wallpanel /roof panel sandwiched between two L.S. 208.00 2.12 440.96
3.8 Engineered welded wire fabric mesh of 3 mm dia cum 0.36 5024.15 1808.69
9999 G.I. wire mesh,with 50 mm pitch in both the directions, kept at 120-135 L.S. 312.15 2.12 661.76
9999 mm gap and interconnected by the zig zag G.I. wire of 3 mm dia at L.S. 707.50 2.12 1499.90
alternate row by welding. 10648.31
3.60 sqm + 0.18 sqm (Add for wastage @5%)Total = 3.78 sqm 106.48
Add for L-shape,U-shape & straight lap mesh Cement mortar 1:3 10754.80
(1cement:3 coarse sand) 2x1.20x3.00x0.05= 0.36 cum 1511.05
Rate as per Item No.3.8 of SH: Mortar 10 mm TMT bars (2 nos.75 mm 12265.84
long) 1839.88
Aluminium C-channels (100mmx150mm long) For fixing wall with 14105.72
foundation 141.06
LABOUR 14246.78
For carrying out shotcreting, shoring, leveling, and finishing the surface 3957.44
with trowel. 3957.45
TOTAL
Add 1 % Water charges on "W" TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 3.60 sqm
Cost of 1 sqm
Say

26.47 Providing and fixing in position, 230mm thick factory made Expanded Polystyrene Core (EPS Core) roof/floor panels made of 3
wire mesh with 50 mm pitch in both the directions and on both faces of panel, kept at 120-135 mm gap and connected by the zig zag G.I. wir
dia at alternate row by welding (at an angle ranging from 50-70 degree). The EPS core shall consist of 100 mm thick EPS of density not less
per cum. The bottom side of the panel shall be finished by applying a layer of 60-65 mm thick cement mortar 1: 3 {1 cement: 3 coarse sand
more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting equipment etc at a pressure of not less than 1 bar (100Kn/m2
surface finished with trowel. The top face of the panel shall be provided and finished by applying 70-75 mm thick layer of cement concrete 1
cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Fixing operations of roof/floor panels shall be completed in all r
as per drawings and specifications and under the overall direction of the Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


8013 Details of cost for 1.20x3.00m= 3.60 sqm MATERIAL sqm 3.78 1650.00 6237.00
3.8 Factory made EPS Core wallpanel /roof panel sandwiched between two cum 0.216 5024.15 1085.22
5.3 Engineered welded wire fabric mesh of 3 mm dia cum L.S. 0.252 10719.30 2701.26
9999 G.I. wire mesh,with 50 mm pitch in both the directions, kept at 120-135 L.S. 202.32 2.12 428.92
9999 mm gap and interconnected by the zig zag G.I. wire of 3 mm dia at 832.36 2.12 1764.60
alternate row by welding. sqm 3.78 12217.00
3.60 sqm + 0.18 sqm (Add for wastage @5%)Total = 3.78 sqm 95.16
Cement mortar 1:3 (1cement:3 coarse sand) 12312.16
60mm thick on the bottom of roof slab =1x1.2x3.00x0.060= 0.216cum 1350.33
Rate as per Item No.3.8 of SH: Mortar Cement concrete 1:1.5:3 13662.49
70mm thick on the top of roof slab =1x1.20x3.00x0.07= 0.252 cum 1644.18
Rate as per Item No.5.3 of SH: Reinforced Cement Concrete Add for L- 15306.67
shape, U-shape & straight lap mesh 126.05
LABOUR 15432.73
For providing concreting, shotcreting, shoring, leveling, plastering and 4286.87
finishing the surface with trowel. 4286.85
TOTAL
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 3.60 sqm
Cost of 1 sqm
Say

26.48 Providing and fixing of customized Aluminium form work for monolithic construction on RCC members with repetitive usage m
aluninium sheets/plates of minimum 4mm thickness and grade 6061 (Type-6). The formwork comprises of (a) wall panel, roccker, kicker
soffit corner, external soffit corner, external corner, internal corner etc., (b) beam components i.e, beam side panel prop head for soffit b
beams soffit panel, beam soffit bulk head and (c) deck components i.e. deck panel, deck prop, prop length, deck mid, soffit length, deck
The panels are held in position by a simple pin and wedge system that passes thorugh holes in the out side rib of each panel. The tolera
finished panel shall not be less than (-1 mm) and shall conform to IS 14987-1999. Pins and wedges to be made of high grade hot dipped
mild steel. This form work also comprises of M.S. angle iron, "Z" shaped brackets braced diagonally at 0.90 to 1.00 mtr. centre to centre
wall face just the level below on which to lay M.S. square tube panels (Challis) and guard railing supports to form working platform and
G.I. telescopic adjustable props to support deck formwork and beam soffit panels including de-shuttering the formwork from odd/even
shifted/lifted to next alterante odd/even level before which the points and shuttering surface to be thoroughly cleaned, pins greasing a
shuttering surface oiling propoerly before fixing all complete including sealing of gap between kicker plates of wall panel and floors (if
design of formwork as provided by shuttering supplier and as per direction of the Engineer-in-charge including filling and finishing the
varied sizes and shapes (left by keys/pins of aluminium form work shuttering while de-shuttering) with GP-2 cementeous polymer comp
with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes upto full depth of wall usin
appropriate tools and finishing
smooth all complete as per directions of the Engineer-in-charge.

Code Description Unit Quantity Rate Rs. Amount Rs.


5772 Detail of cost for 100 sqm (Assuming 100 repetitions) 43456.16
9999 MATERIAL -2098.20
5773 Aluminium forwork & MS working platform 100 sqm @ 852554 = 852554 2250.00
9999 (Total material cost modified as 'D' below) 209.56
9999 Therefore cost for using once 852554/100 = 8525.54 Deduct solvage 450.00
0116 value of aluminium for work and working 848.00
0117 platform with 100 repetitions @30% of bare material cost i.e, 1060.00
0155 Rs.687356.25 (marked as ' A ' below ) = 687356.25 /100 @ 30% = (-) 3920.00
0114 2062.07 3570.00
Sub A/R-2 Grease to be applied to pins for 100 sqm @ 5pins/sqm. using 25gm 1498.00
grease /pin = 100x5x25 gm = 12.50 Kg 6450.00
Add replacement of lost/ damaged accessories Shuttering oil for panels 61613.52
@ 20sqm /ltr = 100/20 = 5.00 ltr Add sundries for gaps filling with sealants 7492.50
etc. and T& P including pully, ropes and misc. tools 69106.02
Add for PVC sleeve and plastic cover for wall tiles 691.06
LABOUR 69797.08
Fitter 9806.49
Assistant Fitter Mason (Average) Beldar 79603.57
TOTAL 11940.54
Add for filling and fishing the holes of aluminium form work with GP-2 91544.11
TOTAL 915.44
Add 1 % Water charges on "W" TOTAL 12.50 180.00 92459.55
Add GST on "X" (multiplying factor 0.1405) TOTAL 98.85 2.12 924.60
Add 15% CPOH on "Y" TOTAL Kg L.S. 924.60
5.00 90.00
Add Cess @ 1% on "Z" Cost of 10.00 sqm Cost of 1.00 sqm litre
400.00 2.12
Say L.S.
500.00 2.12
L.S.
5.00 784.00
day day day
5.00 714.00
day
2.00 749.00
each
10.00 645.00
450.00 16.65

Sub A/R - 1
Code Description Unit Quantity Rate Rs. Amount Rs.
5780 Material cost Kg 2476.32 250.00 619080.00
5781 Part-1 : Aluminium formwork Kg 2358.40 35.00 82544.00
5782 4mm thick sheet of aluminium alloy grade 6061 (type-6) for the contact Tonne 2.36 5000.00 30954.00
10.2 face area of 100 sqm Kg 270.00 23164.44 30954.00
10.16.1 the sheet/plate requirement including framing flanges and specials = 100 Kg 256.25 13817.76 11800.00
13.50.3 + 120 = 220 sqm Sqm each 15.00 55.50 775332.00
7343 220 sqm @ 10.72 kg/sqm = 2358.40 Kg Add 5% extra waste = 117.92 Kg Kg Kg 30.00 955.00 775332.00
5783 Total = 2358.40 + 117.82 = 2476.32 Kg each 270.00 46.00 6254399.18
4009 4mm thick sheet of aluminium alloy grade 6061 (type-6) for aluminuum 256.25 60.00 3540801.67
7343 formwork 55.00 955.00 832.50
Aluminium formwork weight without wastage = 2358.40 Kg Fabrication 28650.00
cost for formwork panels and special including computerised designing for 3570284.17
fabrication and mock testing before transportation to site of work. 3570284.15
Accossories like pins, wedges and wall ties @ 5% of ( E ) 12420.00
Add cost towards maintenance and time to time repalcement of damaged 15375.00
members @5% ( E ) 52525.00
Packaging and carting of aluminium sheet/plate to the site of work 80320.00
Total Say 619080.00
Part-2: M S working platform on external face (required while fixing & 699400.00
removing ) 4345616.15
M.S angle iron bracket of size 50x50x6 mm 4345616.15
10x6.00 mtr @ 4.50 Kg/mtrs = 270 Kg (Rate as per item no 10.2 SH:10
Steel Work excluding WC, GST, CPOH & Cess )
M.S. Square tube panel of tubes 25x25mm, 1.8mm thick 7x2x11.45 =
160mtr + 45 mtr (railing guards) = 205 mtr @ 1.25 Kg/mtr = 256.25 Kg
(Rate as per item no.10.16.1 SH: Steel Work excluding WC, GST, CPOH
& Cess )
Applying red oxide primer on steel work (approx. 15 sqm) (Rate as per
item no.13.50.3 SH: 13 Finishing excluding WC, GST, CPOH & Cess )
40 mm dia G.I. telescopic adjsutabe props 2-3.5 mtr
Bare cost of material
Say
M S working platform for aluminium formwork M S tube panel
removing ) 4345616.15
M.S angle iron bracket of size 50x50x6 mm 4345616.15
10x6.00 mtr @ 4.50 Kg/mtrs = 270 Kg (Rate as per item no 10.2 SH:10
Steel Work excluding WC, GST, CPOH & Cess )
M.S. Square tube panel of tubes 25x25mm, 1.8mm thick 7x2x11.45 =
160mtr + 45 mtr (railing guards) = 205 mtr @ 1.25 Kg/mtr = 256.25 Kg
(Rate as per item no.10.16.1 SH: Steel Work excluding WC, GST, CPOH
& Cess )
Applying red oxide primer on steel work (approx. 15 sqm) (Rate as per
item no.13.50.3 SH: 13 Finishing excluding WC, GST, CPOH & Cess )
40 mm dia G.I. telescopic adjsutabe props 2-3.5 mtr
Bare cost of material
Say
M S working platform for aluminium formwork M S tube panel
Telescopic props = 30x2.75x2= 165 mtr. One prop length = 3m. Total
number of prop = 165/3 = 55 Nos.
Total
Aluminium formworkmatrial cost (marked as ' E ' = 619080
Grand total
Total material cost ( B ) + ( C )
Say

Filling and finishing the holes of varies sizes and shades (left by keys/pins of aluminium formwork shuttering while de- shuttering ) with GP-2 cementeou
compound mixed with water in ratio prescribed by manufacturer to form consistent workable dough for pushing it in the holes upto full depth of wall using
tools and finishing smooth all complete as per directions of the Engineer-in-charge.

Sub A/R - 2

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of cost for 0.01 cum
(Assuming 100 to 120 nos holes of 0.0001cum to 0.00008 cum size can
be filled with 25 kg (i/c wastage) of GP-2 compound) Material
GP-2 Cementeous compound (100 holes of 0.0001 cum size =
0.01 cum) Labour
Mason 2nd class Beldar 500.00
Sundries for T&P and scaffolding etc. Total 642.60
5774 Cost per each (1588.30/110) 25.00 20.00
580.50
0124 say Kg 0.90 714.00
106.00
0114 day day L.S. 0.90 645.00
1829.10
9999 50.00 2.12
16.63
16.65

26.49 Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light weight solid core panels
made of core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum) adhesive, cement, sand, fly
other bonding material in mortar state processed to form in a preset mould. The outer face on both sides of the panels will be non asbestos fiber cement boa
to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each. Panel shall be laid on 6mm thick cement mortar (1 cement: 2 fine
with chemical adhesive of 0.5kg per 50kg of cement or shall be preferably fixed into 'C' channel made of 1.2mm thick MS plate screwed/fastenened to the
slab/column/beam etc. The panel shall fixed vertically with tongue and groove joint and horizontally locked with steel bar between each other and floors and
cement mortar and adhesive. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the op
be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is inc
"C channel" which will be paid seperately).
26.49.1 Non load bearing panels 50mm thick of required size

Code Description Unit Quantity Rate Amount


7996 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 735.25 7720.13
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 37.00 2.12 78.44
0123 10.50 sqm day day 0.50 784.00 392.00
0114 Factory made EPS light weight composite sandwitched wall/roof panel 1.00 645.00 645.00
(50mm thick) having core material of EPS granule balls/beads 8835.57
(conforming to IS 4671:1984 and shall have density not less than 15kg 88.36
per cum). The outer face on both sides of the panels will be non asbestos 8923.92
fiber cement board confirming to IS 14862:2000 or Calcium silicate board 1253.81
confirming to EN 14306:2009 of 5mm thick each 10177.73
Sundries, wooden wedge for levelling, cement mortar, Chemical adhesive 1526.66
& dowel bar (6mm dia) 11704.39
LABOUR 117.04
For fixing, aligning, locking the panels Mason Grade -1 11821.44
Beldar TOTAL 1182.14
Add 1 % Water charges on "W" TOTAL 1182.15
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.49.2 Non load bearing panels 60mm thick of required size

Code Description Unit Quantity Rate Amount


Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL
Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total
area = 10.50 sqm

7997 Factory made EPS light weight composite sandwitched wall/roof panel sqm 10.50 845.00 8872.50
9999 (60mm thick) having core material of EPS granule balls/beads L.S. 37.00 2.12 78.44
0123 (conforming to IS 4671:1984 and shall have density not less than 15kg day day 0.50 784.00 392.00
0114 per cum). The outer face on both sides of the panels will be non asbestos 1.00 645.00 645.00
fiber cement board confirming to IS 14862:2000 or Calcium silicate board 9987.94
confirming to EN 14306:2009 of 5mm thick each 99.88
Sundries, wooden wedge for levelling, cement mortar, Chemical adhesive 10087.82
& dowel bar (6mm dia) 1417.34
LABOUR 11505.16
For fixing, aligning, locking the panels Mason Grade -1 1725.77
Beldar TOTAL 13230.93
Add 1 % Water charges on "W" TOTAL 132.31
Add GST on "X" (multiplying factor 0.1405) TOTAL 13363.24
Add 15% CPOH on "Y" TOTAL 1336.32
Add Cess @ 1% on "Z" Cost of 10 sqm 1336.30
Cost of 1sqm
Say

26.49.3 Non load bearing panels 75mm thick of required size


Code Description Unit Quantity Rate Amount
7998 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 1074.46 11281.83
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 37.00 2.12 78.44
0123 10.50 sqm day day 0.50 784.00 392.00
0114 Factory made EPS light weight composite sandwitched wall/roof panel 1.00 645.00 645.00
(75mm thick) having core material of EPS granule balls/beads 12397.27
(conforming to IS 4671:1984 and shall have density not less than 15kg 123.97
per cum). The outer face on both sides of the panels will be non asbestos 12521.24
fiber cement board confirming to IS 14862:2000 or Calcium silicate board 1759.23
confirming to EN 14306:2009 of 5mm thick each 14280.48
Sundries, wooden wedge for levelling, cement mortar, Chemical adhesive 2142.07
& dowel bar (6mm dia) 16422.55
LABOUR 164.23
For fixing, aligning, locking the panels Mason Grade -1 16586.77
Beldar TOTAL 1658.68
Add 1 % Water charges on "W" TOTAL 1658.70
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.49.4 Non load bearing panels 90mm thick of required size

Code Description Unit Quantity Rate Amount


7999 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 1268.00 13314.00
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 37.00 2.12 78.44
0123 10.50 sqm day day 0.50 784.00 392.00
0114 Factory made EPS light weight composite sandwitched wall/roof panel 1.00 645.00 645.00
(90mm thick) having core material of EPS granule balls/beads 14429.44
(conforming to IS 4671:1984 and shall have density not less than 15kg 144.29
per cum). The outer face on both sides of the panels will be non asbestos 14573.73
fiber cement board confirming to IS 14862:2000 or Calcium silicate board 2047.61
confirming to EN 14306:2009 of 5mm thick each 16621.34
Sundries, wooden wedge for levelling, cement mortar, Chemical adhesive 2493.20
& dowel bar (6mm dia) 19114.55
LABOUR 191.15
For fixing, aligning, locking the panels Mason Grade -1 19305.69
Beldar TOTAL 1930.57
Add 1 % Water charges on "W" TOTAL 1930.55
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.49.5 Non load bearing panels 100mm thick of required size

Code Description Unit Quantity Rate Amount


8000 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 1512.37 15879.89
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 37.00 2.12 78.44
0123 10.50 sqm day day 0.50 784.00 392.00
0114 Factory made EPS light weight composite sandwitched wall/roof panel 1.00 645.00 645.00
(100mm thick) having core material of EPS granule balls/beads 16995.33
(conforming to IS 4671:1984 and shall have density not less than 15kg 169.95
per cum). The outer face on both sides of the panels will be non asbestos 17165.28
fiber cement board confirming to IS 14862:2000 or Calcium silicate board 2411.72
confirming to EN 14306:2009 of 5mm thick each 19577.00
Sundries, wooden wedge for levelling, cement mortar, Chemical adhesive 2936.55
& dowel bar (6mm dia) 22513.55
LABOUR 225.14
For fixing, aligning, locking the panels Mason Grade -1 22738.69
Beldar TOTAL 2273.87
Add 1 % Water charges on "W" TOTAL 2273.85
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.50 Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core pan
light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent i
mould. The outer
face on both sides of the panels will be non asbestos fibre cement board confirming to IS 14862:2000. These solid wall panels are installed using Galvanized
tracks/C channel of 1mm thick of required sizes as recommended by manufacturer's and fixed to floor and RCC soffit in plumb to each other with steel screw
The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibr
fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, stee
depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction
in-Charge (Cost of all the material is included except "tracks/C channel" which will be paid separately).
26.50.1 Non load bearing panels 50mm thick of required size (minimum 4mm thick fibre cement board)

Code Description Unit Quantity Rate Amount


0244 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 634.00 6657.00
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 500.00 2.12 1060.00
0123 10.50 sqm day day day 1.00 784.00 784.00
0114 Factory made light weight composite non asbestos fibre reinforced 2.00 645.00 1290.00
0131 aerated cement sandwitched wall/roof panel (50mm thick). The outer face 0.50 714.00 357.00
on both sides of the panels will be non asbestos fibre cement board 10148.00
(minimum 4mm thick) confirming to IS 14862:2000 101.48
Sundries, cement based polymer modified jointing compound, polymer 10249.48
based jointing compound having superior flexibility, fibre glass tape etc. 1440.05
LABOUR 11689.53
For fixing, aligning, locking the panels, glass fibre tape/fibre mesh with a 1753.43
jointing compound. 13442.96
Mason Grade -1 Beldar 134.43
Painter TOTAL 13577.39
Add 1 % Water charges on "W" TOTAL 1357.74
Add GST on "X" (multiplying factor 0.1405) TOTAL 1357.75
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.50.2 Non load bearing panels 75mm thick of required size (minimum 5mm thick fibre cement board)
Code Description Unit Quantity Rate Amount
0245 Details of cost 10sqm (6.95Nos x0.6m x2.40m = 10sqm) MATERIAL sqm 10.50 789.00 8284.50
9999 Panel area = 10.00sqm, Add wastage @ 5% = 0.50sqm, Total area = L.S. 500.00 2.12 1060.00
0123 10.50 sqm day day day 1.00 784.00 784.00
0114 Factory made light weight non asbestos fibre reinforced aerated cement 2.00 645.00 1290.00
0131 sandwitched wall/roof panel (75mm thick). The outer face on both sides of 0.50 714.00 357.00
the panels will be non asbestos fibre cement board (minimum 5mm thick) 11775.50
confirming to IS 14862:2000 117.76
Sundries, cement based polymer modified jointing compound, polymer 11893.26
based jointing compound having superior flexibility, fibre glass tape etc. 1671.00
LABOUR 13564.26
For fixing, aligning, locking the panels, glass fibre tape/fibre mesh with a 2034.64
jointing compound. 15598.90
Mason Grade -1 Beldar 155.99
Painter TOTAL 15754.88
Add 1 % Water charges on "W" TOTAL 1575.49
Add GST on "X" (multiplying factor 0.1405) TOTAL 1575.50
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1sqm
Say

26.51 Supplying of standard quality GFRG panel of 124 mm thickness with modular cavities purchased from GFRG panel manufacturing plant in t
cut to required wall sizes and floor/ roof slab sizes in correct length and height, including cutting of door, window and ventilator opening as per the cutti
prepared by architects /design engineers for the construction of GFRG building and loaded in stillages for transportation to the construction site. Cost o
includes security deposits, hire charges of stillages & jaws, cost of transportation in trucks/ lorries without any damages upto 300kms including all lead
from GFRG manufacturing plant to construction site and unloading at site using suitable fork lift/ crane. (Payment shall be made on the basis of area of
panel without reduction of opening of door/ window / ventilator).
For transportation above 300kms, additional charges to be paid.
Code Description Unit Quantity Rate Amount
7368 Detail of cost for 1sqm. MATERIALS sqm L.S. 1.05 845.00 887.25
9999 Panel area = 1.00sqm, Add wastage @ 5% = 0.050sqm, Total area = L.S. 26.00 2.12 55.12
9999 1.05 sqm 17.00 2.12 36.04
GFRG panel of 124mm thick Transportation of panel in suitable 978.41
truck (Rs 0.15/sqm/km) upto 300 Km 9.78
Hire Charges for Stillages/Lifting jaw, unloading of panel at site 988.19
using for lift or crane, Hire Charges for Stillages/Lifting jaw 138.84
TOTAL 1127.04
Add 1% water charges TOTAL 169.06
Add GST on "X" (multiplying factor 0.1405) TOTAL 1296.09
Add 15% CPOH on "Y" TOTAL 12.96
Add Cess @1% on "Z" Cost of 1 sqm 1309.05
Say 1309.05

26.52 Erection of GFRG Panels in walls in all floors using suitable crane as per instructions of Engineer-in-Charge, as
per cutting drawings and structural drawings, in perfect line and plumb, above RCC plinth beam/GFRG panel below and provide necessary lateral/ slanti
to keep the wall panel in safe position, providing & tieing of Reinforcement as per structural drawings and applying a coat of water repellant coa
Zycosil/equivalent or equivalent product (1 Zycosil/equivalent compound :10 water ) to saturation level over RCC plinth beam to provide water proofin
to joint between wall panel & plinth beam as per the guide lines / instruction by the engineer in charge. (Cost of reinforcement, water proofing of wal
beam/GFRG panel below joints and installation of door/ window frames before filling of concrete shall be paid separately). The rate quoted shall includ
provision for laying of lintels, beams, sunshades, staircase beams, lofts, plumbing work, electrical conduits and any structural insertion etc., as per the
direction of the engineer in charge. The payment shall be made based on the actual exposed area (one side only) of the panel.
The work shall be carried out as per the Special Conditions For Glass Fibre Reinforced Gypsum (GFRG) Structures mentioned in NIT.
Note: i) When cutting panel, “A” side is to be for outside or external surface of respective external wall and B
side is to be for internal surface of wall
ii)Erection of panel is to be with reference to both building plan & cutting drawing by following notational mark indicated in the cutting drawing as well
mark written on each panel cut as per cutting drawing

Code Description Unit Quantity Rate Amount


0123 Detail of cost for 36sqm. (4 walls of 3mx3m = 36 sqm) LABOUR day day 2.00 784.00 1568.00
0123 Skilled trained crew erection team 4 persons for 4 hour day 1.00 784.00 784.00
0123 Mason (Brick layer) 1st class day 1.00 784.00 784.00
0123 For 2 Lintels works, 4 skilled men for 2 hrs Mason (Brick layer) 1st day day L.S. 1.00 784.00 784.00
0116 class 0.50 784.00 392.00
0037 Web cutting for horizontal tie beam, 2 skilled men for 4 hrs 0.375 4500.00 1687.50
9999 Mason (Brick layer) 1st class 150.00 2.12 318.00
Placing horizontal tie beam reinforcement 4 men for 2 hrs 6317.50
Mason (Brick layer) 1st class 63.18
Cost for technical supervisor for 4 hrs (Technical supervisor = Skilled 6380.68
labour) 896.48
Fitter (Grade 1) Mobile crane 7277.16
Hire charge for lateral support & Lifting jaws TOTAL 1091.57
Add 1% water charges TOTAL 8368.73
Add GST on "X" (multiplying factor 0.1405) TOTAL 83.69
Add 15% CPOH on "Y" TOTAL 8452.42
Add Cess @1% on "Z" Cost of 36 sqm 234.79
Cost of 1 sqm 234.80
Say

26.53 Filling of empty cavities (as shown in the structural design drawing) with quarry dust mixed with 5% cement
(by volume). After initial infill of 50 mm thick with M25 concrete at base/bottom of cavities to seal off, infill wall panel cavities in 3 stages as detailed be
(i) 1st pour / infill to be limited to 0.3 to 0.50 m height from bottom of the panel.
(ii) 2nd Pour/ infill: infilling shall be done only after 90 minutes interval between successive pours. The maximum height of infill shall be restricted to 1.
up to the top level of door / window.
(iii) 3rd pour/infill: After an interval of 90 minutes of second pour, infill or pour the balance height up to the bottom of embedded RCC tie beam.
Pour
enough water just required to dampen the dry mix enough to form cake form after each stage. (cost of laying M25 concrete shall be paid separately)
(If any rain falls in between any stages of concrete pour, make sure to cover the panel top to prevent ingress of water or water falling into the cavities.
water collection over the concrete inside the panel, drill 10mm hole in GFRG panel immediately above concrete filled level to drain out water before po
balance concreting)

Code Description Unit Quantity Rate Amount


1159 Detail of cost for filling one panel size 9 sqm (3mx3m Wall) cum tonne 0.85 1100.00 935.00
0367 MATERIAL day 0.06091 5000.00 304.55
0002 Stone dust/Quarry dust filling in cavities of size 230x94 mm day day 0.125 800.00 100.00
0124 OPC Cement @ 5% volume of quarry dust Tools and plants hire 0.125 714.00 89.25
0114 charges 0.125 645.00 80.63
Mixer hire charges LABOUR 1509.43
Mason (brick layer) 2nd class Beldar 15.09
TOTAL 1524.52
Add 1% water charges TOTAL 214.19
Add GST on "X" (multiplying factor 0.1405) TOTAL 1738.71
Add 15% CPOH on "Y" TOTAL 260.81
Add Cess @1% on "Z" Cost of 0.85 cum Cost of 1 cum 1999.52
Say 20.00
2019.52
2375.90
2375.90
Add GST on "X" (multiplying factor 0.1405) TOTAL 1738.71
Add 15% CPOH on "Y" TOTAL 260.81
Add Cess @1% on "Z" Cost of 0.85 cum Cost of 1 cum 1999.52
Say 20.00
2019.52
2375.90
2375.90

26.54 Laying of GFRG panel as roof / floor slab panel and staircase panel using suitable crane as per instructions of Engineer-in-Charge, including
support system with 25mm x 300mm-400 mm wide plywood, as runner with proper prop below proposed micro beams including
(a) Cutting of top flange of panel to 180 mm wide (leaving 25mm projection on either side) to provide RCC embedded micro beam as per cutting drawin
structural drawings.
(b) Reinforcement for micro beams and tie beams to be provided in position with proper anchorage as per structural drawings.
(c) Provision for Electrical cabling, fan hooks and laying of pipes for plumbing work.
(d) Concreting of Tie beam, micro beam and top of GFRG panels (50 mm thick) with M-25 cement concrete mix using coarse aggregate of size less than
including laying of 10 gauge 100x100 size weld mesh with 25 mm effective cover from the panel top.

Code Description Unit Quantity Rate Amount


0123 Detail of cost for 9 sqm (3mx3m wall panel) LABOUR day 0.25 784.00 196.00
0123 Providing runner & support system in place for placing panel in day 0.50 784.00 392.00
0123 position with 40mm bearing on walls( 4 Skilled persons for 1/2 day L.S. 0.50 784.00 392.00
9999 Hrs /1/16 days) Mason (Brick layer) 1st class day 29.00 2.12 61.48
0037 Lifting panel from stack by crane and placing in position with 40 0.125 4500.00 562.50
mm bearing on walls 4 skilled labour for 1 hrs Mason (Brick layer) 1603.98
1st class 16.04
Cutting & removal of top flange to protruding 25mm 1620.02
on either sides for keying panel into RCC micro beams in position 227.61
(every 3rd cavities runner/span in place beneath) and providing 1847.63
concealed beam reinforcement in position, side shuttering for slab 277.14
for external side(with 6mm grove) also to be provided (mean while 2124.78
providing fan hooks, electrical cabling, piping etc by coordinate task 21.25
by concerned skilled persons, 4 skilled labour for 1 hrs 2146.03
Mason (Brick layer) 1st class 238.45
Hire charges for runner and support system and side shuttering for 238.45
external side of slab for 5 days
Mobile crane TOTAL
Add 1% water charges TOTAL
Add GST on "X" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @1% on "Z" Cost of 9 sqm
Cost of 1 sqm
Say
26.55 Supplying and fixing 10 Gauge weld mesh of size 100mm x100 mm for floor/roof slab concrete screed over the micro beams as reinforcem
mesh shall be fixed as per drawing.

Code Description Unit Quantity Rate Amount


1223 Detail of cost for 9sqm (3mx3m) MATERIAL sqm 9.45 150.00 1417.50
0103 Mesh area = 9.00sqm, Add wastage @ 5% = 0.45sqm, Total area = day day 0.125 714.00 89.25
0114 9.45 sqm 0.125 645.00 80.63
Steel weld mesh 1587.38
Labour for filling the quarry dust Blacksmith 2nd class 15.87
Beldar TOTAL 1603.25
Add 1% water charges TOTAL 225.26
Add GST on "X" (multiplying factor 0.1405) TOTAL 1828.51
Add 15% CPOH on "Y" TOTAL 274.28
Add Cess @1% on "Z" Cost of 9 sqm 2102.78
Cost of 1 sqm 21.03
Say 2123.81
235.98
236.00

26.56 Application of ZMB 60/equivalent solution (100 Kg ZMB 60/equivalent, 1 litre ZMB Nano Thinner, 20 litre
water & 1 Litre Zycoprime/equivalent = 122 litre/kg) over already applied coat of Zycosil/equivalent & Zycoprime/equivalent solution on the top of all
plinth beams by brush/spray coat before erection of GFRG over RCC plinth beams in GF. In the case of upper floors 150 mm wide on floor slab for all th
walls, bath/toilet/wet areas (3 hrs drying time) before erection of wall panel on upper floors including
erection of parapet wall.

Code Description Unit Quantity Rate Amount


8516 Detail of cost for 122sqm MATERIAL kg litre litre 100.00 110.00 11000.00
8517 ZMB 60 / equivalent ZMB Thinner Zycoprime / equivalent L.S. 1.00 220.00 220.00
8518 Water, brush, technical supervision etc. LABOUR day 1.00 230.00 230.00
9999 Mason (Brick layer) 1st class TOTAL 78.00 2.12 165.36
0123 Add 1% water charges TOTAL 20.333 784.00 15941.07
Add GST on "X" (multiplying factor 0.1405) TOTAL 27556.43
Add 15% CPOH on "Y" TOTAL 275.56
Add Cess @1% on "Z" Cost of 122 sqm 27832.00
Cost of 1 sqm 3910.40
Say 31742.39
4761.36
36503.75
365.04
36868.79
302.20
302.20
26.57 After erection of GFRG wall panels, seal all GFRG wall joints with paper tape temporarily. Water proofing treatment of vertical joints with
Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and s
23 litres)) with 50 ml syringe till the gap and in filled concrete is completely saturated. After removing the paper seal, seal off the
vertical joints with water proofing material "Grout RW/equivalent " (Sealing cost excluded.)

Code Description Unit Quantity Rate Amount


8519 Detail of cost for 3 metre MATERIAL litre litre L.S. 0.02609 1800.00 46.96
8518 Zycosil /equivalent Zycoprime / equivalent water, syringe, etc. day 0.05217 230.00 12.00
9999 LABOUR 16.00 2.12 33.92
0123 Mason (Brick layer) 1st class TOTAL 0.125 784.00 98.00
Add 1% water charges TOTAL 190.88
Add GST on "X" (multiplying factor 0.1405) TOTAL 1.91
Add 15% CPOH on "Y" TOTAL 192.79
Add Cess @1% on "Z" Cost of 3 metre 27.09
Cost of 1 metre 219.88
Say 32.98
252.86
2.53
255.39
85.13
85.15

26.58 Filling of joints between RCC plinth beam / floor slab and wall panel of external walls, toilet / bath room / wet
areas walls on all floor and parapet wall over roof slab, stair case head room at the time of erection of GFRG panels with Grout RW/equivalent sealant c
after the erection of panel before the infill of concrete in panel cavities and fine finish. This applies for all horizontal and vertical joints between GFRG
panels.

Code Description Unit Quantity Rate Amount


8520 Detail of cost for 48 metre MATERIAL kg tonne L.S. 1.00 300.00 300.00
0367 Elastobar / equivalent OPC Cement day 0.0015 5000.00 7.50
9999 100 mesh silica, water, technical supervision, etc. LABOUR 3.00 2.12 6.36
0123 Mason (Brick layer) 1st class TOTAL 1.500 784.00 1176.00
Add 1% water charges TOTAL 1489.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 14.90
Add 15% CPOH on "Y" TOTAL 1504.76
Add Cess @1% on "Z" Cost of 48 metre Cost of 1 metre 211.42
Say 1716.18
257.43
1973.60
19.74
1993.34
41.53
41.55
26.59 Water proofing treatment of Vertical joints (of external side and internal side) between door frame, window & ventilator frames (on all fo
outer wall over the Zycosil/equivalent & Zycoprime/equivalent solution already applied (before the installation of door / window / ventilator frames in
and fine
finish with Grout RW/equivalent.

Code Description Unit Quantity Rate Amount


8519 Detail of cost for 40 sqm MATERIAL litre litre L.S. 1.00 1800.00 1800.00
8518 Zycosil / equivalent Zycoprime / equivalent day 2.00 230.00 460.00
9999 Water, technical supervision, etc. LABOUR kg tonne L.S. 6.00 2.12 12.72
0123 Mason (Brick layer) 1st class Cost of 40 sqm day 0.28571 784.00 224.00
8520 Cost of 1 metre (10mm thick) Detail of cost for 48 metre MATERIAL 1.00 300.00 2496.72
0367 Elastobar / equivalent OPC Cement 0.0015 5000.00 0.62
9999 100 mesh silica, water, technical supervision, etc. LABOUR 3.00 2.12 300.00
0123 Mason (Brick layer) 1st class Cost of 48 metre 1.50 784.00 7.50
Cost of 1 metre 6.36
1176.00
1489.86
31.04

TOTAL (A1+A2) 31.66


Add 1% water charges TOTAL 0.32
Add GST on "X" (multiplying factor 0.1405) TOTAL 31.98
Add 15% CPOH on "Y" TOTAL 4.49
Add Cess @1% on "Z" Cost of 1 metre 36.47
Say 5.47
41.94
0.42
42.36
42.35

26.60 Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of wa
first & 2 litres of Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops t
water drops do not absorb but drops remain or rolls.

Code Description Unit Quantity Rate Amount


8519 Detail of cost for 40 sqm MATERIAL litre litre L.S. 1.00 1800.00 1800.00
8518 Zycosil / equivalent Zycoprime /equivalent day 2.00 230.00 460.00
9999 Water, technical supervision, etc. LABOUR 7.00 2.12 14.84
0131 Painter TOTAL 2.50 714.00 1785.00
Add 1% water charges TOTAL 4059.84
Add GST on "X" (multiplying factor 0.1405) TOTAL 40.60
Add 15% CPOH on "Y" TOTAL 4100.44
Add Cess @1% on "Z" Cost of 40 sqm 576.11
Cost of 1 sqm 4676.55
Say 701.48
5378.03
53.78
5431.81
135.80
135.80

26.61 In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in
and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent
& zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade.

Code Description Unit Quantity Rate Amount


8519 Detail of cost for 40 sqm MATERIAL litre litre L.S. 1.00 1800.00 1800.00
8518 Zycosil / equivalent Zycoprime / equivalent day 2.00 230.00 460.00
9999 Water, technical supervision, etc. LABOUR kg tonne L.S. 6.00 2.12 12.72
0123 Mason (Brick layer) 1st class Cost of 40 sqm day 0.28571 784.00 224.00
8520 Cost of 1 metre (10mm thick) 1.00 300.00 2496.72
0367 Detail of cost for 48 metre MATERIAL 0.0015 5000.00 0.62
9999 Elastobar / equivalent OPC Cement 3.00 2.12 300.00
0123 100 mesh silica, water, technical supervision, etc. LABOUR 1.50 784.00 7.50
Mason (Brick layer) 1st class Cost of 48 metre 6.36
Cost of 1 metre TOTAL (A1+A2) 1176.00
Add 1% water charges TOTAL 1489.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 31.04
Add 15% CPOH on "Y" TOTAL 31.66
Add Cess @1% on "Z" Cost of 1 metre 0.32
Say 31.98
4.49
36.47
5.47
41.94
0.42
42.36
42.35
Cost of 1 metre TOTAL (A1+A2) 1176.00
Add 1% water charges TOTAL 1489.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 31.04
Add 15% CPOH on "Y" TOTAL 31.66
Add Cess @1% on "Z" Cost of 1 metre 0.32
Say 31.98
4.49
36.47
5.47
41.94
0.42
42.36
42.35

26.62 Designing, Providing, installing and fixing factory finished customed design pregalvanized high tensile steel joists manufactured from G350 Z275 c
IS:277-1992, minimum coating of galvanizing 275 gm/sqm,
minimum yield stress 35 MPa & minimum tensile strength of 380 MPa placed 1.23 metre apart to support the load of slab etc as per the design & directi
Engineer-in-Charge.

Code Description Unit Quantity Rate Amount


Detail of cost for 212.816 kgs
MATERIAL
Covered area = 5.57x4.2m = 23.394 sqm
(a) 250 series Joist (G 350) - 3mm thick - Galvanised = 4 Nos x4.18
metre length = 16.72 metre @ 10.59 kg/metre
= 177.06 kg
(b) Joist Shoe plate (E 250) - 12 mm thick MS Plate (Galvanised
with 55 microns) = 2 Nos in each joist x 4 No. joist = 8 No's @
2.4kg/each = 19.2kg
(c) Bolts (M16 - Gr 8.8s), (Galvanised) (16 X 40 bolts
With washer & Nuts)= 6No's in each joist x 4 No. joists=24 Nos 24
No'[email protected]/each = 3.24 kg
(d) Hanging Angle at corners to support lock bars L
75x40x1.6 (Galvanised) = 2x4.18 metre =8.36 metre @
1.60kg/metre = 13.376 kg
Total weight = 177.06+19.2+3.24+13.376 = 212.816 kgs
Pregalvanized high tensile steel LABOUR (Reference item no 10.1)
Fitter (grade 1) 19153.44
Blacksmith 2nd class Beldar 834.18
Total 1139.54
Add 1 % Water charges on "W" TOTAL 1372.56
Add GST on "X" (multiplying factor 0.1405) TOTAL 22499.72
Add 15% CPOH on "Y" TOTAL 225.00
1012 212.816 90.00
Add Cess @ 1% on "Z" Cost of 212.816 kgs Cost of 1 kg 22724.72
0116 kg 1.064 784.00
Say 3192.82
0103 day day day 1.596 714.00
25917.54
0114 2.128 645.00
3887.63
29805.17
298.05
30103.22
141.45
141.45

26.63 Providing and fixing special adjustable lockbars of mild steel E-250 to support the temporary plywood for work between joists during con
per design & directions of the Engineer-in-charge.

Code Description Unit Quantity Rate Amount


Detail of cost for 298.75 kgs
MATERIAL
Assuming special adjustable lock bar of mild steel will become
unserviceable after use of 50 times
Taking salvage value after full use of material @ 35% of cost
Lock bar of size 1230mmx75mmx10mm 45 Nos x 4.35kg/each =
195.75 kg.
Lock bar of size 930mmx75mmx10mm 30 Nos x 3.3kg/each = 99.00
kg.
Total weight = 298.75 kgs
Assuming 50 repetition, Qty taken for cost of using once =
298.75/50= 5.975 kgs
Considering salvage value @ 35%, Quantity = 5.975x(100- 35)/100
= 3.88 kgs
Lock Bar (E 250) - 10 thick MS Plate

7336 kgs 3.88 76.00 294.88

0116 LABOUR (Reference item no 10.1) Fitter (grade 1) day day day 1.49 784.00 1168.16
0103 Blacksmith 2nd class Beldar 2.24 714.00 1599.36
0114 Total 2.99 645.00 1928.55
Add 1 % Water charges on "W" TOTAL 4990.95
Add GST on "X" (multiplying factor 0.1405) TOTAL 49.91
Add 15% CPOH on "Y" TOTAL 5040.86
Add Cess @ 1% on "Z" Cost of 298.75 kgs Cost of 1 kg 708.24
Say 5749.10
862.37
6611.47
66.11
6677.58
22.35
22.35

26.64 Centering and shuttering with 12mm thick shuttering plywood confirming to IS 4990:2011 and removal of form at all heights. Plywood will b
on lock bars.
26.64.1 Suspended floors, roofs, landings, balconies and access platform.

Code Description Unit Quantity Rate Amount


Detail of cost for 13.50 sqm
MATERIAL
Assuming 12mm thick plywood will become unserviceable after use
of 10 times
Area of roof = 13.50 sqm + Add wastage @ 5% = 0.675 sqm. Total =
14.175 sqm.
Qty taken for cost using once = 14.175/10 = 1.4175 sqm
12mm thick waterproofing plywood confirming to IS 4990:2011
LABOUR (Reference item no 5.9.20) Carpenter 2nd class
Beldar Total
Add 1 % Water charges on "W" TOTAL 744.19
Add GST on "X" (multiplying factor 0.1405) TOTAL 89.25
Add 15% CPOH on "Y" TOTAL 80.63
Add Cess @ 1% on "Z" Cost of 13.50 sqm Cost of 1 sqm 914.06
Say 9.14
923.20
8659 1.4175 525.00
sqm 129.71
0112 0.125 714.00
day day 1052.91
0114 0.125 645.00
157.94
1210.85
12.11
1222.96
90.59
90.60

26.65 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992
used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck
supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will
separately).

Code Description Unit Quantity Rate Amount


8019 Detail of cost for 10 sqm MATERIAL kg 79.00 90.00 7110.00
1217 Weight of GI sheet for 10sqm = 76.7 kgs + Add wastage @ 3% = 2.3 kg tonne each 12.60 75.00 945.00
2314 kg. Total = 79.00 kg L.S. 0.0916 145.72 13.35
1218 GI sheet 0.8 mm thick confirming to IS 277:1992 L.S. 40.00 50.00 2000.00
9999 Length wire mesh 200metre/10 sqm. Weight of wire @ day day day 138.70 2.12 294.04
9999 0.06 kg/m. total weight = 12 kgs + Add wastage @ 5% = day day 462.40 2.12 980.29
0130 0.6 kgs. Total 12.6 kg 0.108 784.00 84.67
0112 GI Wire mesh 100x100 mm Carriage of sheet & wire Shear stud 0.432 714.00 308.45
0114 Nails/Tagged screws Labour for fixing shear stud 0.432 645.00 278.64
0102 Labour for sheeting (Ref item no 26.19.1) Mistry 0.12 784.00 94.08
0114 Carpenter 2nd class Beldar 0.120 645.00 77.40
Labour for laying wire mesh (Ref item no 5.22.2) Blacksmith 1st 12185.92
class 121.86
Beldar Total 12307.78
Add 1 % Water charges on "W" TOTAL 1729.24
Add GST on "X" (multiplying factor 0.1405) TOTAL 14037.02
Add 15% CPOH on "Y" TOTAL 2105.55
Add Cess @ 1% on "Z" Cost of 10 sqm 16142.58
Cost of 1 sqm 161.43
Say 16304.00
1630.40
1630.40
1630.40
1630.40

26.66 Providing and fixing in position, 130 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sand
between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made o
zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate r
welding. The EPS core shall consist of 60 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by
layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of
shotcreting/guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall
be completed in all respect as per drawings and
specifications and under the overall direction of the Engineer-in-charge.

Code Description Unit Quantity Rate Amount


8020 Details of cost for 1.20x3.00m= 3.60 sqm MATERIAL sqm 3.78 600.00 2268.00
9999 Area of EPS panel = 3.60 sqm + Add wastage @5%. Total = L.S. 208 2.12 440.96
3.8 3.78 sqm cum 0.252 5024.15 1266.09
5.22.6 Factory made EPS Core wall panel /roof panel sandwiched between kg L.S. 2.9600 89.65 265.36
9999 two Engineered welded wire fabric mesh of 3 mm dia G.I. wire L.S. 78 2.12 165.36
9999 mesh, with 50 mm pitch in both the directions, connected by G.I. L.S. 312.15 2.12 661.76
9999 wire of 3mm dia at alternate row by welding 707.5 2.12 1499.90
Add for L-shape, U-shape & straight lap mesh 6567.43
Cement mortar 1:3 (1cement:3 coarse sand) 2x1.20x3.00x0.035= 63.02
0.252 cum 6630.45
Rate as per Item No.3.8 of SH: Mortar 894.29
10 mm TMT bars 8 nos of 0.60 metre long. Total length = 7524.74
4.8 m @ 0.617 kg/metre. Total weight = 2.96 kg 1088.91
Rate as per 5.22.6 (SH:5 Reinforced Cement Concrete) Tag screw 8613.65
with washers for wire mesh fixing 83.48
For fixing wall with foundation 8697.13
LABOUR 2415.87
For carrying out shotcreting, shoring, leveling, and finishing the 2415.85
surface with trowel.
Total
Add 1 % Water charges on "W-A" TOTAL
Add GST on "X-A" (multiplying factor 0.1405) TOTAL
Add 15% CPOH on "Y-A" TOTAL
Add Cess @ 1% on "Z-A" Cost of 3.6 sqm
Cost of 1 sqm
Say
26.67 Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded Polystyrene (E
insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W/mK, (measured as pe
1980), density of 20-24 kg/m³ measured as per IS 5688-1982, Fire retardant property self-extinguishing type as per EN 13501-1, bonded with special p
modified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to ty
substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Appro
dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyu
Foam. Second layer
consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ≥145 gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special p
modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10
mesh mass per unit area min 145 gm/m². The surface will be levelled, finished, made smooth complete in all respect as
per manufactures specification and as per directions of Engineer-in-Charge.

Code Description Unit Quantity Rate Amount


8562 Details of cost for 10 sqm sqm 11.00 825.00 9075.00
1252 Material kg each 50.00 34.00 1700.00
1253 Area of insulation board = 10 sqm + Add wastage @ 10% = 1 sqm. 750 ml metre 100.00 30.00 3000.00
1254 Total = 11.00 sqm kg 0.80 600.00 480.00
1255 Expanded Polystyrene insulation board 120 mm thick confirming to sqm 5.00 90.00 450.00
1256 IS 4671-1984, Fire retardant property self- extinguishing type as per day day L.S. 50.00 40.00 2000.00
1257 EN 13501-1 L.S. 10.00 75.00 750.00
0131 Cementitious polymer base adhesive confirming to EOTA ETAG 004 4.00 714.00 2856.00
0114 (European Technical Approval) 4.00 645.00 2580.00
9999 Polypropylene mechanical fastener with plastic pin confirming to 72.25 2.12 153.17
9999 EOTA ETAG 014 (European Technical Approval) having dia 10mm & 1445.09 2.12 3063.59
L=200mm 26107.76
Moisture cure Polyurethane Foam 261.08
PVC Corner Bead of size 25mmx25mm fixed with glass fibre mesh 26368.84
(100mm x 100mm) 3704.82
Cementitious polymer base coat confirming to EOTA ETAG 004 30073.66
(European Technical Approval) 4511.05
Fiberglass mesh with alkali-resistant coating having mass 34584.71
per unit area ≥145 g/m2, mesh size: 3.9x4.0 mm ±10% 345.85
Labour Painter Beldar 34930.56
Trowel, Angle Float, Brushes, sand paper etc. 3493.06
Sundries (PVC drip bead with glass fibre mesh wing (100mm x 3493.05
100mm), expansion joint, starter track of 1mm thick aluminium
alloy (120mm wide), polyurethane sealent, scaffolding etc.)
Total
Add 1 % Water charges on "W" TOTAL
Add GST on "X" TOTAL
Add 15% CPOH on "Y" TOTAL
Add Cess @ 1% on "Z" Cost of 10 sqm
Cost of 1 sqm
Say
26.68 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved
manufacturer in foundation and plinth in:
26.68.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Code No Description Unit Quantity Rate Amount


Details of cost for 1 cum

8658 MATERIAL: 1000 Nos 0.1109 25150.00 2789.14


2201 Precast C&D waste concrete block Carriage of blocks 1000 Nos 0.1109 437.15 48.48
3.11 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Rate as per item No cum L.S. 0.113 3686.30 416.55
9999 3.11 of SH: Mortar Sundries day day day 2.73 2.12 5.79
0123 LABOUR day 0.33 784.00 258.72
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie 0.33 714.00 235.62
0115 Bhisti Total 1.00 645.00 645.00
0101 Add 1 % Water charges on "W" TOTAL 0.18 714.00 128.52
Add GST on "X" (multiplying factor 0.1405) TOTAL 4527.81
Add 15% CPOH on "Y" TOTAL 45.28
Add Cess @ 1% on "Z" Cost of 1 cum 4573.09
Say 642.52
5215.61
782.34
5997.95
59.98
6057.93
6057.95

26.69 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved ma
superstructure above plinth level up to floor V level
26.69.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Code No Description Unit Quantity Rate Amount


8658 Details of cost for 1 cum MATERIAL: 1000 Nos 0.1109 25150.00 2789.14
2201 Precast C&D waste concrete block Carriage of blocks 1000 Nos 0.1109 437.15 48.48
3.11 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Rate as per item No cum L.S. 0.113 3686.30 416.55
9999 3.11 of SH: Mortar Sundries day day day 2.73 2.12 5.79
0123 LABOUR day L.S. 0.47 784.00 368.48
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie day 0.47 714.00 335.58
0115 Bhisti Scaffolding 1.80 645.00 1161.00
0101 Extra labour element required for lifting of materials (above floor 0.20 714.00 142.80
9999 two level upto floor five level) 22.36 2.12 47.40
0115 Coolie Total 1.13 645.00 728.85
Add 1 % Water charges on "W" TOTAL 6044.07
Add GST on "X" (multiplying factor 0.1405) TOTAL 60.44
Add 15% CPOH on "Y" TOTAL 6104.51
Add Cess @ 1% on "Z" Cost of 1 cum 857.68
Say 6962.19
1044.33
8006.52
80.07
8086.59
8086.60

26.70 Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness
of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:
26.70.1 Cement mortar 1:4(1 cement : 4 coarse sand)

Code No Description Unit Quantity Rate Amount


8658 Details of cost for 10 sqm MATERIAL: 1000 Nos 0.1161 25150.00 2919.92
2201 Precast C&D waste concrete block Carriage of blocks 1000 Nos 0.1161 437.15 50.75
3.9 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Rate as per item No cum L.S. 0.0708 4355.20 308.35
9999 3.9 of SH: Mortar day day day 13.52 2.12 28.66
0123 Sundries LABOUR day 0.45 784.00 352.80
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie 0.45 714.00 321.30
0115 Bhisti Total 1.55 645.00 999.75
0101 Add 1 % Water charges on "W" TOTAL 0.70 714.00 499.80
Add GST on "X" (multiplying factor 0.1405) TOTAL 5481.33
Add 15% CPOH on "Y" TOTAL 54.81
Add Cess @ 1% on "Z" Cost of 10 sqm 5536.14
Cost of 1 sqm 777.83
Say 6313.97
947.10
7261.07
72.61
7333.68
733.37
733.35
26.71 Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness of grade M10 made of C&D w
approved manufacturer in superstructure above plinth level up to floor V level:

26.71.1 Cement mortar 1:4 (1 cement : 4 coarse sand)


Code No Description Unit Quantity Rate Amount
8658 Details of cost for 10 sqm MATERIAL: 1000 Nos 0.1161 25150.00 2919.92
2201 Precast C&D waste concrete block Carriage of blocks 1000 Nos 0.1161 437.15 50.75
3.9 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Rate as per item No cum L.S. 0.0708 4355.20 308.35
9999 3.9 of SH: Mortar day day day 13.52 2.12 28.66
0123 Sundries LABOUR day 0.60 784.00 470.40
0124 Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie 0.60 714.00 428.40
0115 Bhisti 2.00 645.00 1290.00
0101 Extra labour for lifting materials: 0.70 714.00 499.80

0115 Extra labour for lifting materials: Coolie day 1.29 645.00 832.05
Total 6828.33
Add 1 % Water charges on "W" TOTAL 68.28
Add GST on "X" (multiplying factor 0.1405) TOTAL 6896.61
Add 15% CPOH on "Y" TOTAL 968.97
Add Cess @ 1% on "Z" Cost of 10 sqm 7865.59
Cost of 1 sqm 1179.84
Say 9045.42
90.45
9135.88
913.59
913.60

26.72 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D w
making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with
etc. all
complete as per the direction of Engineer-in-charge.

Code No Description Unit Quantity Rate Amount


7776 Details of cost for 10 sqm MATERIAL: sqm 10.00 295.00 2950.00
0982 Concrete paver block of grade M-30 made of C&D waste (60mm cum cum 0.50 1500.00 750.00
2203 thickness) cum cum 0.50 163.93 81.97
0983 Bedding layer - 50mm thick 10x0.050=0.50 cum day day 0.15 900.00 135.00
2261 Coarse sand (zone III) Carriage of Coarse sand Fine sand (zone IV) day day 0.15 163.93 24.59
0123 Carriage of fine sand 0.50 784.00 392.00
0124 Laying charges (Based on actual observation) LABOUR 0.50 714.00 357.00
0114 Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar 1.00 645.00 645.00
0115 Coolie Total 0.50 645.00 322.50
Add 1 % Water charges on "W" TOTAL 5658.05
Add GST on "X" (multiplying factor 0.1405) TOTAL 56.58
Add 15% CPOH on "Y" TOTAL 5714.64
Add Cess @ 1% on "Z" Cost of 10 sqm 802.91
Cost of 1 sqm 6517.54
Say 977.63
7495.17
74.95
7570.12
757.01
757.00

26.73
Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to 30%) of different thickness & modular width 12
Controlled Factory Environment with approved methodology confirming to IS 10297:1982 by using long line casting method having arra
proper steel bed. Concreting should be done by batch mixing plant capable of producing zero slump concrete, transported through autom
shuttels of standard make & layed on bed with the help of extruder/Slipformer, finishing, curing and also provision of steam curing. Cut
necessary cutout/holes of required sizes for services in slab element after achieving required strength, yard handling & stacking all com
approved shop drawings & design mix as per the direction of the Engineer-in-charge. (Cost of strands should be paid separately).
Note: Excess/less cement over the specified cement content used as per design mix is payable/recoverable separately)
26.73.1 Concrete Grade-M-40 (cement content 400 kg )

26.73.1.1 100 mm thick hollow core slab


Code no Description Unit Quantity Rate Amount

5.33.2.4 Detail cost of 10.80 cum (120 Rmt ) 120 Rmt X 1.20 m X .10 cum quintal 10.80 10504.85 113452.38
5.35 (25 % hollow) Rate as per item no 5.33.2.4 of SH RCC L.S. 5.40 688.45 3717.63
9999 Rate as per item no 5.35 of SH RCC Hollow core bed cost cum L.S. 1301.00 2.12 2758.12
0031 Steam curing by using boiler /Heater L.S. 10.80 500.00 5400.00
9999 Extra cost for preparing zero slump concrete Cutting, marking, L.S. 936.00 2.12 1984.32
9999 lifting & transportation Sundries sqm 578.00 2.12 1225.36
9999 Rate as per item no 5.41.1 of SH RCC (120x2x(1.20+0.10)=312) 13.00 2.12 27.56
5.41.1 TOTAL 312.00 57.50 17940.00
Add 1 % Water charges on "W-A" TOTAL 146505.37
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 113.95
Add 15% CPOH on "Y-A" TOTAL 146619.32
Add Cess @ 1% on "Z-A" Cost of 120 metre 1617.06
Cost of 1 metre Say 148236.38
1968.96
150205.34
150.95
150356.29
1252.97
1252.95
5.33.2.4 Detail cost of 10.80 cum (120 Rmt ) 120 Rmt X 1.20 m X .10 cum quintal 10.80 10504.85 113452.38
5.35 (25 % hollow) Rate as per item no 5.33.2.4 of SH RCC L.S. 5.40 688.45 3717.63
9999 Rate as per item no 5.35 of SH RCC Hollow core bed cost cum L.S. 1301.00 2.12 2758.12
0031 Steam curing by using boiler /Heater L.S. 10.80 500.00 5400.00
9999 Extra cost for preparing zero slump concrete Cutting, marking, L.S. 936.00 2.12 1984.32
9999 lifting & transportation Sundries sqm 578.00 2.12 1225.36
9999 Rate as per item no 5.41.1 of SH RCC (120x2x(1.20+0.10)=312) 13.00 2.12 27.56
5.41.1 TOTAL 312.00 57.50 17940.00
Add 1 % Water charges on "W-A" TOTAL 146505.37
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 113.95
Add 15% CPOH on "Y-A" TOTAL 146619.32
Add Cess @ 1% on "Z-A" Cost of 120 metre 1617.06
Cost of 1 metre Say 148236.38
1968.96
150205.34
150.95
150356.29
1252.97
1252.95

26.73.1.2 120 mm thick hollow core slab

Code no Description Unit Quantity Rate Amount

5.33.2.4 Detail cost of 12.96 cum (120 Rmt ) 120 Rmt X 1.20 m X .12 cum quintal 12.96 10504.85 136142.86
5.35 (25 % hollow) Rate as per item no 5.33.2.4 of SH RCC L.S. 6.48 688.45 4461.16
9999 Rate as per item no 5.35 of SH RCC Hollow core bed cost cum L.S. 1301.00 2.12 2758.12
0031 Steam curing by using boiler /Heater L.S. 12.96 500.00 6480.00
9999 Extra cost for preparing zero slump concrete Cutting, marking, L.S. 1124.00 2.12 2382.88
9999 lifting & transportation Sundries sqm 578.00 2.12 1225.36
9999 Rate as per item no 5.41.1 of SH RCC 13.00 2.12 27.56
5.41.1 (120x2x(1.20+0.12)=316.80) 316.80 57.50 18216.00
TOTAL 171693.93
Add 1 % Water charges on "W-A" TOTAL 128.74
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 171822.67
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 171822.67
Cost of 1 metre Say 1950.40
173773.07
149.53
173922.60
1449.36
1449.35
26.73.1.3 150 mm thick hollow core slab

Code no Description Unit Quantity Rate Amount


5.33.2.4 Detail cost of 16.20 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.15 cum quintal 16.20 10504.85 170178.57
5.35 (25 % hollow) Rate as per item no 5.33.2.4 of SH RCC Rate as L.S. 8.10 688.45 5576.45
9999 per item no 5.35 of SH RCC Hollow core bed cost cum L.S. 1301.00 2.12 2758.12
0031 Steam curing by using boiler /Heater L.S. 16.20 500.00 8100.00
9999 Extra cost for preparing zero slump concrete Cutting, marking, L.S. 1405.00 2.12 2978.60
9999 lifting & transportation Sundries sqm 578.00 2.12 1225.36
9999 Rate as per item no 5.41.1 of SH RCC 13.00 2.12 27.56
5.41.1 (120x2x(1.20+0.15)=324.00) TOTAL 324.00 57.50 18630.00
Add 1 % Water charges on "W-A" TOTAL 209474.66
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 150.90
Add 15% CPOH on "Y-A" TOTAL 209625.55
Add Cess @ 1% on "Z-A" 0.00
Cost of 120 metre 209625.55
2286.08
211911.63
175.27
212086.90

Cost of 1 metre Say 1767.39


1767.40

26.73.1.4 200 mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
5.33.2.4 Detail cost of 20.160 cum (120 Rmt ) 120 Rmt X 1.20 m X0.20 cum quintal 20.16 10504.85 211777.78
5.35 (30 % hollow) L.S. 10.08 688.45 6939.58
9999 Rate as per item no 5.33.2.4 of SH RCC Rate as per item no 5.35 cum L.S. 1301.00 2.12 2758.12
0031 of SH RCC Hollow core bed cost L.S. 20.16 500.00 10080.00
9999 Steam curing by using boiler /Heater L.S. 1748.00 2.12 3705.76
9999 Extra cost for preparing zero slump concrete Cutting, marking, sqm 578.00 2.12 1225.36
9999 lifting & transportation Sundries 13.00 2.12 27.56
5.41.1 Rate as per item no 5.41.1 of SH RCC 336.00 57.50 19320.00
(120x2x(1.20+0.20)=336.00) TOTAL 255834.15
Add 1 % Water charges on "W-A" TOTAL 177.97
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 256012.12
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 256012.12
Cost of 1 metre 2696.22
Say 258708.34
206.71
258915.05
2157.63
2157.65

26.73.1.5 250 mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
5.33.2.4 Detail cost of 25.20 cum (120 Rmt ) cum quintal 25.20 10504.85 264722.22
5.35 120 Rmt X 1.20 m X 0.25 (30 % hollow) L.S. 12.60 688.45 8674.47
9999 Rate as per item no 5.33.2.4 of SH RCC Rate as per item no 5.35 cum L.S. 1301.00 2.12 2758.12
0031 of SH RCC Hollow core bed cost L.S. 25.20 500.00 12600.00
9999 Steam curing by using boiler /Heater L.S. 2185.00 2.12 4632.20
9999 Extra cost for preparing zero slump concrete Cutting, marking, sqm 578.00 2.12 1225.36
9999 lifting & transportation Sundries 13.00 2.12 27.56
5.41.1 Rate as per item no 5.41.1 of SH RCC 348.00 57.50 20010.00
(120x2x(1.20+0.25)=348.00) TOTAL 314649.93
Add 1 % Water charges on "W-A" TOTAL 212.43
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 314862.36
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 314862.36
Cost of 1 metre 3218.35
Say 318080.71
246.74
318327.45
2652.73
2652.75

26.73.1.6 300 mm thick hollow core slab

Code no Description Unit Quantity Rate Amount


5.33.2.4 Detail cost of 30.24 cum (120 Rmt ) cum quintal 30.24 10504.85 317666.66
5.35 120 Rmt X 1.20 m X 0.30 (30 % hollow) L.S. 15.12 688.45 10409.36
9999 Rate as per item no 5.33.2.4 of SH RCC Rate as per item no 5.35 cum L.S. 1301.00 2.12 2758.12
0031 of SH RCC Hollow core bed cost L.S. 30.24 500.00 15120.00
9999 Steam curing by using boiler /Heater L.S. 2622.00 2.12 5558.64
9999 Extra cost for preparing zero slump concrete Cutting, marking, sqm 578.00 2.12 1225.36
9999 lifting & transportation Sundries 13.00 2.12 27.56
5.41.1 Rate as per item no 5.41.1 of SH RCC 360.00 57.50 20700.00
(120x2x(1.20+0.30)=360.00) TOTAL 373465.71
Add 1 % Water charges on "W-A" TOTAL 246.90
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 373712.60
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 373712.60
Cost of 1 metre 3740.49
Say 377453.09
286.77
377739.86
3147.83
3147.85

26.73.1.7 350 mm thick hollow core slab

Code no Description Unit Quantity Rate Amount


5.33.2.4 Detail cost of 35.28 cum (120 Rmt ) cum quintal 35.28 10504.85 370611.11
5.35 120 Rmt X 1.20 m X 0.35 (30 % hollow) L.S. 17.64 688.45 12144.26
9999 Rate as per item no 5.33.2.4 of SH RCC Rate as per item no 5.35 cum L.S. 1301.00 2.12 2758.12
0031 of SH RCC Hollow core bed cost L.S. 35.28 500.00 17640.00
9999 Steam curing by using boiler /Heater L.S. 3059.00 2.12 6485.08
9999 Extra cost for preparing zero slump concrete Cutting, marking, sqm 578.00 2.12 1225.36
9999 lifting & transportation Sundries 13.00 2.12 27.56
5.41.1 Rate as per item no 5.41.1 of SH RCC 372.00 57.50 21390.00
(120x2x(1.20+0.35)=372.00) TOTAL 432281.49
Add 1 % Water charges on "W-A" TOTAL 281.36
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 432562.85
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 432562.85
Cost of 1 metre 4262.62
Say 436825.47
326.80
437152.27
3642.94
3642.95

26.73.1.8 400 mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
5.33.2.4 Detail cost of 40.32 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.40 cum quintal 40.32 10504.85 423555.55
5.35 (30 % hollow) L.S. 20.16 688.45 13879.15
9999 Rate as per item no 5.33.2.4 of SH RCC Rate as per item no 5.35 cum L.S. 1301.00 2.12 2758.12
0031 of SH RCC Hollow core bed cost L.S. 40.32 500.00 20160.00
9999 Steam curing by using boiler /Heater L.S. 3496.00 2.12 7411.52
9999 Extra cost for preparing zero slump concrete Cutting, marking, sqm 578.00 2.12 1225.36
9999 lifting & transportation Sundries 13.00 2.12 27.56
5.41.1 Rate as per item no 5.41.1 of SH RCC 384.00 57.50 22080.00
(120x2x(1.20+0.40)=384.00) TOTAL 491097.26
Add 1 % Water charges on "W-A" TOTAL 315.83
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 491413.09
Add 15% CPOH on "Y-A" TOTAL 0.00
Add Cess @ 1% on "Z-A" Cost of 120 metre 491413.09
Cost of 1 metre 4784.76
Say 496197.85
366.83
496564.68
4138.04
4138.05

26.73.2 Extra for using M-50 (Cement content 425 kg) instead of M-40
26.73.2.1 100mm thick hollow core slab
Code no Description Unit Quantity Rate Amount
0367 Detail cost of 10.80 cum (120 Rmt ) 120 Rmt X 1.20 m X .10 tonne tonne 0.270 5000.00 1350.00
2209 (25 % hollow) Cement for M-50 Mix = 4.590 T kg 0.270 145.72 39.34
7318 Cement for M-40 Mix = 4.320 T 5.400 29.00 156.60
Difference 0.270 T Portland Cement Carriage of cement 1545.94
Plasticizer for M-50 Mix = 91.800 Kgs Plasticizer for M-40 15.46
Mix = 86.400 Kgs Difference 5.400 Kgs 1561.40
Plasticizer or Super Plasticizer 2% of cement content 219.38
TOTAL 1780.78
Add 1 % Water charges on "W" TOTAL 267.12
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 2047.90
Add 15% CPOH on "Y" TOTAL 20.48
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 2068.38
Say 17.24
17.25

26.73.2.2 120mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
0367 Detail cost of 12.96 cum (120 Rmt ) 120 Rmt X 1.20 m X .12 tonne tonne 0.324 5000.00 1620.00
2209 (25 % hollow) Cement for M-50 Mix = 5.508 T Cement for M- kg 0.324 145.72 47.21
7318 40 Mix = 5.184 T Difference 0.324 T 6.48 29.00 187.92
Portland Cement Carriage of cement 1855.13
Plasticizer for M-50 Mix = 110.160 Kgs Plasticizer for M-40 18.55
Mix = 103.680 Kgs Difference 6.480 Kgs 1873.68
Plasticizer or Super Plasticizer 2% of cement content 263.25
TOTAL 2136.94
Add 1 % Water charges on "W" TOTAL 320.54
Add GST on "X" (multiplying factor 0.1405) TOTAL 2457.48
Add 15% CPOH on "Y" TOTAL 24.57
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 2482.05
Say 20.68
20.70

26.73.2.3 150mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
0367 Detail cost of 16.20 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.15 tonne tonne 0.405 5000.00 2025.00
2209 (25 % hollow) Cement for M-50 Mix = 6.885 T Cement for M- kg 0.405 145.72 59.02
7318 40 Mix = 6.480 T Difference 0.405 T 8.10 29.00 234.90
Portland Cement Carriage of cement 2318.92
Plasticizer for M-50 Mix = 137.700 Kgs Plasticizer for M-40 23.19
Mix = 129.600 Kgs Difference 8.100 Kgs 2342.11
Plasticizer or Super Plasticizer 2% of cement content 329.07
TOTAL 2671.17
Add 1 % Water charges on "W" TOTAL 400.68
Add GST on "X" (multiplying factor 0.1405) TOTAL 3071.85
Add 15% CPOH on "Y" TOTAL 30.72
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 3102.57
Say 25.85
25.85

26.73.2.4 200mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
0367 Detail cost of 20.160 cum (120 Rmt ) 120 Rmt X 1.20 m tonne tonne 0.504 5000.00 2520.00
2209 X0.20 (30 % hollow) Cement for M-50 Mix = 8.568 T Cement kg 0.504 145.72 73.44
7318 for M-40 Mix = 8.064 T Difference 0.504 T 10.08 29.00 292.32
Portland Cement Carriage of cement 2885.76
Plasticizer for M-50 Mix = 171.360 Kgs Plasticizer for M-40 28.86
Mix = 161.280 Kgs Difference 10.080 Kgs 2914.62
Plasticizer or Super Plasticizer 2% of cement content 409.50
TOTAL 3324.12
Add 1 % Water charges on "W" TOTAL 498.62
Add GST on "X" (multiplying factor 0.1405) TOTAL 3822.74
Add 15% CPOH on "Y" TOTAL 38.23
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 3860.97
Say 32.17
32.15

26.73.2.5 250mm thick hollow core slab

Code no Description Unit Quantity Rate Amount


0367 Detail cost of 25.20 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.25 tonne tonne 0.63 5000.00 3150.00
2209 (30 % hollow) Cement for M-50 Mix = 10.710 T Cement for kg 0.63 145.72 91.80
7318 M-40 Mix = 10.080 T Difference 0.630 T 12.60 29.00 365.40
Portland Cement Carriage of cement 3607.20
Plasticizer for M-50 Mix = 214.200 Kgs Plasticizer for M-40 36.07
Mix = 201.600 Kgs Difference 12.600 Kgs 3643.28
Plasticizer or Super Plasticizer 2% of cement content 511.88
TOTAL 4155.16
Add 1 % Water charges on "W" TOTAL 623.27
Add GST on "X" (multiplying factor 0.1405) TOTAL 4778.43
Add 15% CPOH on "Y" TOTAL 47.78
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 4826.21
Say 40.22
40.20

26.73.2.6 300mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
0367 Detail cost of 30.24 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.30 tonne tonne 0.756 5000.00 3780.00
2209 (30 % hollow) Cement for M-50 Mix = 12.852 T Cement for kg 0.756 145.72 110.16
7318 M-40 Mix = 12.096 T Difference 0.756 T 15.12 29.00 438.48
Portland Cement Carriage of cement 4328.64
Plasticizer for M-50 Mix = 257.040 Kgs Plasticizer for M-40 43.29
Mix = 241.920 Kgs Difference 15.1200 Kgs 4371.93
Plasticizer or Super Plasticizer 2% of cement content 614.26
TOTAL 4986.19
Add 1 % Water charges on "W" TOTAL 747.93
Add GST on "X" (multiplying factor 0.1405) TOTAL 5734.12
Add 15% CPOH on "Y" TOTAL 57.34
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 5791.46
Say 48.26
48.25

26.73.2.7 350mm thick hollow core slab

Code no Description Unit Quantity Rate Amount


0367 Detail cost of 35.28 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.35 tonne tonne 0.882 5000.00 4410.00
2209 (30 % hollow) Cement for M-50 Mix = 14.994 T Cement for kg 0.882 145.72 128.53
7318 M-40 Mix = 14.112 T Difference 0.882 T 17.64 29.00 511.56
Portland Cement Carriage of cement 5050.09
Plasticizer for M-50 Mix = 299.880 Kgs Plasticizer for M-40 50.50
Mix = 282.240 Kgs Difference 17.640 Kgs 5100.59
Plasticizer or Super Plasticizer 2% of cement content 716.63
TOTAL 5817.22
Add 1 % Water charges on "W" TOTAL 872.58
Add GST on "X" (multiplying factor 0.1405) TOTAL 6689.80
Add 15% CPOH on "Y" TOTAL 66.90
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 6756.70
Say 56.31
56.30

26.73.2.8 400mm thick hollow core slab


Code no Description Unit Quantity Rate Amount
0367 Detail cost of 40.32 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.40 tonne tonne 1.008 5000.00 5040.00
2209 (30 % hollow) Cement for M-50 Mix = 17.136 T Cement for kg 1.008 145.72 146.89
7318 M-40 Mix = 16.128 T Difference 1.008 T 20.16 29.00 584.64
Portland Cement Carriage of cement 5771.53
Plasticizer for M-50 Mix = 342.720 Kgs Plasticizer for M-40 57.72
Mix = 322.560 Kgs Difference 20.160 Kgs 5829.24
Plasticizer or Super Plasticizer 2% of cement content 819.01
TOTAL 6648.25
Add 1 % Water charges on "W" TOTAL 997.24
Add GST on "X" (multiplying factor 0.1405) TOTAL 7645.49
Add 15% CPOH on "Y" TOTAL 76.45
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 7721.94
Say 64.35
64.35

26.73.3 Extra for using M-60 (Cement content 440 kg) instead of M-40

26.73.3.1 100mm thick hollow core slab


Code no Description Unit Quantity Rate Amount

Detail cost of 10.80 cum (120 Rmt ) 120 Rmt X 1.20 m X .10
(25 % hollow) Cement for M-60 Mix = 4.752 T
Cement for M-40 Mix = 4.320 T
Difference 0.432 T Portland Cement Carriage of cement
Plasticizer for M-60 Mix = 95.040 Kgs Plasticizer for M-40
Mix = 86.400 Kgs Difference 8.640 Kgs
Plasticizer or Super Plasticizer 2% of cement content
0367 TOTAL 0.432 5000.00 2160.00
2209 tonne tonne 0.432 145.72 62.95
7318 kg 8.640 29.00 250.56
2473.51

Add 1 % Water charges on "W" TOTAL 24.74


Add GST on "X" (multiplying factor 0.1405) TOTAL 2498.25
Add 15% CPOH on "Y" TOTAL 351.00
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 2849.25
Say 427.39
3276.64
32.77
3309.40
27.58
27.60

26.73.3.2 120mm thick hollow core slab

Code no Description Unit Quantity Rate Amount

0367 Detail cost of 12.96 cum (120 Rmt ) tonne tonne 0.518 5000.00 2590.00
2209 120 Rmt X 1.20 m X .12 (25 % hollow) Cement for M-60 Mix kg 0.518 145.72 75.48
7318 = 5.702 T Cement for M-40 Mix = 5.184 T Difference 0.518 T 10.36 29.00 300.44
Portland Cement Carriage of cement 2965.92
Plasticizer for M-60 Mix = 114.04 Kgs Plasticizer for M-40 29.66
Mix = 103.680 Kgs Difference 10.36 Kgs 2995.58
Plasticizer or Super Plasticizer 2% of cement content 420.88
TOTAL 3416.46
Add 1 % Water charges on "W" TOTAL 512.47
Add GST on "X" (multiplying factor 0.1405) TOTAL 3928.93
Add 15% CPOH on "Y" TOTAL 39.29
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 3968.22
Say 33.07
33.05
26.73.3.3 150mm thick hollow core slab
Code no Description Unit Quantity Rate Amount

0367 Detail cost of 16.20 cum (120 Rmt ) tonne tonne 0.648 5000.00 3240.00
2209 120 Rmt X 1.20 m X 0.15 (25 % hollow) Cement for M-60 Mix kg 0.648 145.72 94.43
7318 = 7.128 T Cement for M-40 Mix = 6.480 T Difference 0.648 T 12.96 29.00 375.84
Portland Cement Carriage of cement 3710.27
Plasticizer for M-60 Mix = 142.56 Kgs Plasticizer for M-40 37.10
Mix = 129.600 Kgs Difference 12.960 Kgs 3747.37
Plasticizer or Super Plasticizer 2% of cement content 526.51
TOTAL 4273.87
Add 1 % Water charges on "W" TOTAL 641.08
Add GST on "X" (multiplying factor 0.1405) TOTAL 4914.96
Add 15% CPOH on "Y" TOTAL 49.15
Add Cess @ 1% on "Z" 4964.11
Cost for 120 metre Cost of 1 metre Say 41.37
41.35

26.73.3.4 200mm thick hollow core slab

Code no Description Unit Quantity Rate Amount

0367 Detail cost of 20.160 cum (120 Rmt ) 120 Rmt X 1.20 m tonne tonne 0.806 5000.00 4030.00
2209 X0.20 (30 % hollow) Cement for M-60 Mix = 8.870 T Cement kg 0.806 145.72 117.45
7318 for M-40 Mix = 8.064 T Difference 0.806 T 16.12 29.00 467.48
Portland Cement Carriage of cement 4614.93
Plasticizer for M-60 Mix = 177.40 Kgs Plasticizer for M-40 46.15
Mix = 161.280 Kgs Difference 16.12 Kgs 4661.08
Plasticizer or Super Plasticizer 2% of cement content 654.88
TOTAL 5315.96
Add 1 % Water charges on "W" TOTAL 797.39
Add GST on "X" (multiplying factor 0.1405) TOTAL 6113.36
Add 15% CPOH on "Y" TOTAL 61.13
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 6174.49
Say 51.45
51.45
26.73.3.5 250mm thick hollow core slab
Code no Description Unit Quantity Rate Amount

0367 Detail cost of 25.20 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.25 tonne tonne 1.008 5000.00 5040.00
2209 (30 % hollow) Cement for M-60 Mix = 11.088 T Cement for kg 1.008 145.72 146.89
7318 M-40 Mix = 10.080 T Difference 1.008 T 20.16 29.00 584.64
Portland Cement Carriage of cement 5771.53
Plasticizer for M-60 Mix = 221.760 Kgs Plasticizer for M-40 57.72
Mix = 201.600 Kgs Difference 20.160 Kgs 5829.24
Plasticizer or Super Plasticizer 2% of cement content 819.01
TOTAL 6648.25
Add 1 % Water charges on "W" TOTAL 997.24
Add GST on "X" (multiplying factor 0.1405) TOTAL 7645.49
Add 15% CPOH on "Y" TOTAL 76.45
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 7721.94
Say 64.35
64.35

26.73.3.6 300mm thick hollow core slab


Code no Description Unit Quantity Rate Amount

0367 Detail cost of 30.24 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.30 tonne tonne 1.21 5000.00 6050.00
2209 (30 % hollow) Cement for M-60 Mix = 13.306 T Cement for kg 1.21 145.72 176.32
7318 M-40 Mix = 12.096 T Difference 1.210 T 24.20 29.00 701.80
Portland Cement Carriage of cement 6928.12
Plasticizer for M-60 Mix = 266.12 Kgs Plasticizer for M-40 69.28
Mix = 241.920 Kgs Difference 24.20 Kgs 6997.40
Plasticizer or Super Plasticizer 2% of cement content 983.14
TOTAL 7980.54
Add 1 % Water charges on "W" TOTAL 1197.08
Add GST on "X" (multiplying factor 0.1405) TOTAL 9177.62
Add 15% CPOH on "Y" TOTAL 91.78
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 9269.39
Say 77.24
77.25
26.73.3.7 350mm thick hollow core slab
Code no Description Unit Quantity Rate Amount

0367 Detail cost of 35.28 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.35 tonne tonne 1.411 5000.00 7055.00
2209 (30 % hollow) Cement for M-60 Mix = 15.523 T Cement for kg 1.411 145.72 205.61
7318 M-40 Mix = 14.112 T Difference 1.411 T 27.22 29.00 789.38
Portland Cement Carriage of cement 8049.99
Plasticizer for M-60 Mix = 310.46 Kgs Plasticizer for M-40 80.50
Mix = 282.240 Kgs Difference 28.22 Kgs 8130.49
Plasticizer or Super Plasticizer 2% of cement content 1142.33
TOTAL 9272.82
Add 1 % Water charges on "W" TOTAL 1390.92
Add GST on "X" (multiplying factor 0.1405) TOTAL 10663.75
Add 15% CPOH on "Y" TOTAL 106.64
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 10770.39
Say 89.75
89.75

26.73.3.8 400mm thick hollow core slab

Code no Description Unit Quantity Rate Amount

0367 Detail cost of 40.32 cum (120 Rmt ) 120 Rmt X 1.20 m X 0.40 tonne tonne 1.613 5000.00 8065.00
2209 (30 % hollow) Cement for M-60 Mix = 17.741 T Cement for kg 1.613 145.72 235.05
7318 M-40 Mix = 16.128 T Difference 1.613 T 32.26 29.00 935.54
Portland Cement Carriage of cement 9235.59
Plasticizer for M-60 Mix = 352.82 Kgs Plasticizer for M-40 92.36
Mix = 322.560 Kgs Difference 32.26 Kgs 9327.94
Plasticizer or Super Plasticizer 2% of cement content 1310.58
TOTAL 10638.52
Add 1 % Water charges on "W" TOTAL 1595.78
Add GST on "X" (multiplying factor 0.1405) TOTAL 12234.30
Add 15% CPOH on "Y" TOTAL 122.34
Add Cess @ 1% on "Z" Cost for 120 metre Cost of 1 metre 12356.64
Say 102.97
102.95
26.74
Fabrication and manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, do
and proper lifting accessories for walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different con
grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts
table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing
transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/holes of required sizes for servi
handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direct
Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately).
Note: Excess/less cement over the specified cement content used as per design mix is payable/recoverable separately)
26.74.1 Concrete grade M-35 (Cement content 370 kgs)

Code no Description Unit Quantity Rate Amount

5.33.2.3 Detail of cost for 1.26 Cum cum 1.26 10,363.30 13057.76
5.35 Considers a wall 2.80 X 3.00 X 0.15 = 1.260 Cum quintal L.S 0.252 688.45 173.49
9999 Rate as per item no 5.33.2.3 of SH RCC sqm L.S 372.00 2.12 788.64
5.9.1 Rate as per item no 5.35 of SH RCC (M-35 (370 kgs)) Cost of L.S 1.74 307.95 535.83
9999 hosting and fixing moulds sqm 174.00 2.12 368.88
9999 Rate as per item 5.9.1 of SH RCC, Side Shuttering of walls each 230.00 2.12 487.60
5.41.1 ((2.8+3)x2x0.15=1.74) metre L.S 18.54 57.50 1066.05
7929 Table buffing & oiling each 12.00 210.00 2520.00
7930 Sundries (Extra labour for Lifting, transportation, stacking of day day 3.00 144.00 432.00
9999 finished precast elements) 115.00 2.12 243.80
7931 Rate as per item no 5.41.1 of SH RCC (Curing using curing 2.00 270.00 540.00
0155 compound) 0.50 749.00 374.50
0115 Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos 0.50 645.00 322.50
on each side
dowel tubes (Corrugated GI pipes 50 to 80mm dia) (For
horizontal joints)
Shear key (6mm thick mechanically folded MS plate) Hooks for
lifting (Alloy steel) having 2.5 tonne capacity
Labour for fixing accessories & inserts such as shear loops,
shear keys, dowel tubes, lifting hooks
Mason (Average) Coolie
0157 Labour for operating of hoisting & fixing moulds day day day 0.50 784.00 392.00
0116 Operator L.S 0.30 784.00 235.20
0115 Fitter (Grade 1) Coolie 0.30 645.00 193.50
9999 Sundries (Labour cost such as crane, trailer(flat bed & a frames) 173.41 2.12 367.63
& panel racks for stacking of precost concrete panel wall) 22099.38
TOTAL 72.66
Add 1 % Water charges on "W-A" TOTAL 22172.04
Add GST on "X-A" (multiplying factor 0.1405) TOTAL 1031.12
Add 15% CPOH on "Y-A" TOTAL 23203.16
Add Cess @ 1% on "Z-A" Cost for 1.26 Cum Cost of 1 Cum 1255.50
Say 24458.66
96.26
24554.92
19488.03
19488.05

26.74.2 Extra for using M-40 (Cement content 400 kg) instead of M-35

Code no Description Unit Quantity Rate Amount


0367 Cement for M-35 Mix = 0.370 T Cement for M-40 Mix = tonne tonne 0.03 5000.00 150.00
2209 0.400 T Difference 0.030 T kg 0.03 145.72 4.37
7318 Portland Cement Carriage of cement 0.60 29.00 17.40
Plasticizer for M-35 Mix =7.400 Kgs Plasticizer for M-40 171.77
Mix = 8.000 Kgs Difference 0.600Kgs 1.72
Plasticizer or Super Plasticizer 2% of cement content 173.49
TOTAL 24.38
Add 1 % Water charges on "W" TOTAL 197.86
Add GST on "X" (multiplying factor 0.1405) TOTAL 29.68
Add 15% CPOH on "Y" TOTAL 227.54
Add Cess @ 1% on "Z" 2.28
Cost of 1.00 Cum 229.82
Say 229.80

26.74.3 Extra for using M-50 (Cement content 425 kg) instead of M-35
Code no Description Unit Quantity Rate Amount
0367 Cement for M-35 Mix = 0.370 T Cement for M-50 Mix = tonne tonne 0.055 5000.00 275.00
2209 0.425 T Difference 0.055 T kg 0.055 145.72 8.01
7318 Portland Cement Carriage of cement 1.10 29.00 31.90
Plasticizer for M-35 Mix =7.400 Kgs Plasticizer for M-50 314.91
Mix = 8.500 Kgs Difference 1.100Kgs 3.15
Plasticizer or Super Plasticizer 2% of cement content 318.06
TOTAL 44.69
Add 1 % Water charges on "W" TOTAL 362.75
Add GST on "X" (multiplying factor 0.1405) TOTAL 54.41
Add 15% CPOH on "Y" TOTAL 417.16
Add Cess @ 1% on "Z" 4.17
Cost of 1.00 Cum 421.34
Say 421.35

26.74.4 Extra for using M-60 (Cement content 440 kg) instead of M-35

Code no Description Unit Quantity Rate Amount


0367 Cement for M-35 Mix = 0.370 T Cement for M-60 Mix = tonne tonne 0.07 5000.00 350.00
2209 0.440 T Difference 0.070 T kg 0.07 145.72 10.20
7318 Portland Cement Carriage of cement 1.40 29.00 40.60
Plasticizer for M-35 Mix =7.400 Kgs Plasticizer for M-60 400.80
Mix = 8.800 Kgs Difference 1.400Kgs 4.01
Plasticizer or Super Plasticizer 2% of cement content 404.81
TOTAL 56.88
Add 1 % Water charges on "W" TOTAL 461.68
Add GST on "X" (multiplying factor 0.1405) TOTAL 69.25
Add 15% CPOH on "Y" TOTAL 530.94
Add Cess @ 1% on "Z" 5.31
Cost of 1.00 Cum 536.25
Say 536.25

26.75 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanic
pulling arrangement like Rabbit/ Bed master including all accessories for Stressing & destressing operations as per appro
make conforming to
IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in-charge.

Code no Description Unit Quantity Rate Amount


0993 Considering Four beds quintal 19.14 5700.00 109098.00
2205 8 strands (each strand is of 9.53mm dia consisting of 7 tonne 1.914 145.72 278.91
9999 wires) X 4 beds X 120 Rmt X 0.453 Unit wt = 1739.52 kgs. L.S. 555.00 2.12 1176.60
9999 Say 1740kgs. L.S. 617.00 2.12 1308.04
0128 Details of Cost for 1740 Kg day day day 1.00 714.00 714.00
0102 MATERIALS day day day 4.00 784.00 3136.00
0115 Quantity = 17.40 quintal + Add wastage 10 % = day 3.00 645.00 1935.00
0128 1.74 q. Total = 19.14 q day 2.00 714.00 1428.00
0116 FY-1860 grade wire strands Carriage of material day day day 3.00 784.00 2352.00
0157 Cutting baldes required for strand cutting Strand cutting day day 2.00 784.00 1568.00
0115 by cutting saw machine Wedges day 2.00 645.00 1290.00
0032 Cost of wedge 1.50 11500.00 17250.00
0028 Resources - For laying and fixing cables, anchorages 1.50 7000.00 10500.00
0034 Mate 1.50 1350.00 2025.00
0030 Blacksmith 1st class Coolie 1.50 3000.00 4500.00
0035 Labour- For prestressting Mate 1.50 3500.00 5250.00
0036 Fitter (Grade-1) Operators Coolie MACHINERY 1.50 3000.00 4500.00
0028 (12 HRS Required to Lay 1.914 Ton strands on 4 beds) 1.50 7000.00 10500.00
Stressing Machine (jack with pump)
Hire & Running Charges of Crane 20 Ton Capacity to
handle strands
(8 Nos. strand coils ( averege weight 3Ton each)
required to lay one bed of 8 strands as one coil can lay
only one strand at a time. Therefore to operate
one complete bed total 8 Nos strand coils required,
Cutting Saw Machine
Hire charges of Generator 250 KVA
Strands Roller machinery for laying strands Bed master
(Pulling strands)
Crane handling charges for bed master & stressing
machine.
One bed master approx wt = 03 Ton (to be placed on each
bed with the help of crane for laying of strands )
One stressing Machine approx wt = 2.5 Ton (to be placed
on each active ends of bed with the help of crane for
initial pulling & stressing of strands ).
1235 Diesel for generator set (14 litres per hour for 11 Litre 154.00 80.87 12453.98
TOTAL 191263.53
Add 1 % Water charges on "W" TOTAL 1912.64
Add GST on "X" (multiplying factor 0.1405) TOTAL 193176.16
Add 15% CPOH on "Y" TOTAL 27141.25
Add Cess @ 1% on "Z" 220317.41
Cost for 1740 kgs Cost of 1 Kg 33047.61
Say 253365.03
2533.65
255898.68
147.07
147.05

26.76 Transportation of Precast Elements by flat bed Trailor (Double / Triple axle 40ft Length with proper accessories
frame etc) from factory, including the cost of loading , unloading & stacking at site with the help of required capacity crane

26.76.1 Lead within 15km


Code no Description Unit Quantity Rate Amount
9999 Trailors having capcity 22MT Hire charges of truck
0028 trailors
0128 Number of trips in working day of 8 hours N=8/{(2L/S)
0114 +2)}. Where L=Lead in Km., S=Speed in Km.per hour, 1
9999 hour is allowed for loading & 1 hour for unloading.
9999 L= 15 km .
9999 Charges of Trailors having capcity 22MT including cost of
fuel & driver cost and maintenance
Hire charges of Crane capacity of 30MT for loading from
stock yard and unloading at site for 120 MT. Mate 3,684.56
Beldar 2,566.90
wooden battens for tranporatation 357.00
Chain for packing & binding precast elements sundries 322.50
TOTAL 122.54
Add 1 % Water charges on "W" TOTAL 122.54
Add GST on "X" (multiplying factor 0.1405) TOTAL 1738.00 2.12 466.40
L.S. 0.3667 7000.00 7642.43
Add 15% CPOH on "Y" TOTAL day 0.50 714.00 76.42
Add Cess @ 1% on "Z" day day 0.50 645.00 7718.86
Cost for 22 MT Cost of 1 MT L.S. 57.80 2.12 1084.50
Say L.S. 57.80 2.12
L.S. 220.00 2.12 8803.36
1320.50
10123.86
101.24
10225.10
464.78
464.80

26.76.2 Add/Deduct over item 26.76.1 for every additional lead of 5 km

Code no Description Unit Quantity Rate Amount


9999 Extra for lead 5 km L.S. 579.00 2.12 1227.48
9999 Charges of Trailors having capcity 22MT including cost of L.S. 220.00 2.12 466.40
fuel & driver and maintenance 1693.88
sundries 16.94
TOTAL 1710.82
Add 1 % Water charges on "W" TOTAL 240.37
Add GST on "X" (multiplying factor 0.1405) TOTAL 1951.19
Add 15% CPOH on "Y" TOTAL 292.68
Add Cess @ 1% on "Z" 2243.87
Cost for 22 MT Cost of 1 MT 22.44
Say 2266.31
103.01
103.00

26.77 Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line lev
plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of ele
within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-
but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor.
26.77.1 Prestressed hollow core Slab up to 200 mm thickness

Code no Description Unit Quantity Rate Amount


0044 Detail of cost for 150 Sqm. day L.S. 1.00 8000.00 8000.00
9999 Length of element can be upto 8.00 metres. Mobile crane hour 434.00 2.12 920.08
0070 (Tyre mounted) upto 25m height 100 feet boom day day 8.00 300.00 2400.00
0111 Cost for crane upto 40 tonne capacity day day 1.00 784.00 784.00
0112 Hire charges of props & Misc Genrator hiring 100kva day L.S. 2.00 714.00 1428.00
0116 Labour cost for erection Carpenter 1st class Carpenter 2.00 784.00 1568.00
0130 2nd class 2.00 784.00 1568.00
0114 Fitter (grade 1) Mistry 2.00 645.00 1290.00
9999 Beldar 500.00 2.12 1060.00
Sundries (Miscellaneous tools and lifting slings) 19018.08
TOTAL 190.18
Add 1 % Water charges on "W" TOTAL 19208.26
Add GST on "X" (multiplying factor 0.1405) TOTAL 2698.76
Add 15% CPOH on "Y" TOTAL 21907.02
Add Cess @ 1% on "Z" 3286.05
Cost for 150 Sqm Cost of 1 Sqm Say 25193.07
251.93
25445.01
169.63
169.65

26.77.2 Prestressed hollow core slab above 200 mm up to 400 mm thickness


Code no Description Unit Quantity Rate Amount
0067 Detail of cost for 120 Sqm. day L.S. 1.00 15000.00 15000.00
9999 Length of element can be more than 8.00 metre and upto hour 347.00 2.12 735.64
0070 14.00 metres. day day 8.00 300.00 2400.00
0111 Cost for crane upto 80 tonne capacity Hire charges of day day 1.00 784.00 784.00
0112 props & Misc Genrator hiring 100kva day L.S. 2.00 714.00 1428.00
0116 Labour cost for erection Carpenter 1st class Carpenter 2.00 784.00 1568.00
0130 2nd class Fitter (grade 1) 2.00 784.00 1568.00
0114 Mistry Beldar 2.00 645.00 1290.00
9999 Sundries (Miscellaneous tools and lifting slings) 500.00 2.12 1060.00
TOTAL 25833.64
Add 1 % Water charges on "W" TOTAL 258.34
Add GST on "X" (multiplying factor 0.1405) TOTAL 26091.98
Add 15% CPOH on "Y" TOTAL 3665.92
Add Cess @ 1% on "Z" 29757.90
Cost for 120 Sqm Cost of 1 Sqm Say 4463.68
34221.58
342.22
34563.80
288.03
288.05

26.77.3 Solid concrete wall elements

Code no Description Unit Quantity Rate Amount


0072 Detail of cost for 18 Cum. / Day day L.S. 1.00 8500.00 8500.00
9999 Considering volume of different type of elements wall L.S. 434.00 2.12 920.08
9999 elements = 15 cum (13 nos) each hour 780.00 2.12 1653.60
1027 Beams / portal = 3 cum (02 nos) Total no of elements = day day day 60.00 25.00 1500.00
0070 15 nos day day day 8.00 300.00 2400.00
0111 Cost for crane (50 MT) duration 01 day Shifting of L.S. 2.00 784.00 1568
0112 elements 2.00 714.00 1428
0116 Hire charges of props & Misc for 3 days (3x3 = 9 / pc) 2.00 784.00 1568
0130 Erection Bolts ( Minimum 04 nos for each element) 3.00 784.00 2352
0116 Genrator hiring 100kva Labour cost 2.00 784.00 1568
0114 Carpenter 1st class Carpenter 2nd class Fitter (grade 1) 8.00 645.00 5160
9999 Mistry 500.00 2.12 1060
Fitter (grade 1) Beldar
Scaffolding, hire charge of drill machine etc.
9999 Sundries (Miscellaneous tools and lifting slings) L.S. 500.00 2.12 1060
TOTAL 30737.68
Add 1 % Water charges on "W" TOTAL 307.38
Add GST on "X" (multiplying factor 0.1405) TOTAL 31045.06
Add 15% CPOH on "Y" TOTAL 4361.83
Add Cess @ 1% on "Z" 35406.89
Cost for 18 cum Cost of 1 cum Say 5311.03
40717.92
407.18
41125.10
2284.73
2284.75

26.78 Providing & Applying weather proof sealant on outer joints of approved make confirming to IS & directed by Eng
in-charge.
26.78.1 Sealant 25mmx10mm at joints

Code no Description Unit Quantity Rate Amount

8646 Detail of material required for = 1.00 metre cartridge 0.87 112.00 97.44
8654 including 5 % wastage metre L.S. 2.00 2.18 4.36
9999 Silicon sealant (including 5% wastage) L.S. 2.87 2.12 6.08
9999 Masking tape 2.87 2.12 6.08
Scaffolding, hire charge etc. Sundries 113.97
TOTAL 1.14
Add 1 % Water charges on "W" TOTAL 115.11
Add GST on "X" (multiplying factor 0.1405) TOTAL 16.17
Add 15% CPOH on "Y" TOTAL 131.28
Add Cess @ 1% on "Z" 19.69
Cost of 1 metre 150.97
Say 1.51
152.48
152.50

26.79 Providing & Laying of levelling sim pads required sizes (5x5cm to 10x10cm) of PVC / Rubber to adjust level of be
surface of supporting members as per the direction of
Engineer in charge.

26.79.1 2mm thick


Code no Description Unit Quantity Rate Amount
0246 Detail of cost for 100 nos MATERIAL each L.S. 100.00 10.00 1000.00
9977 2 mm thick sim pad Carriage of material LABOUR day L.S. 5.00 2.12 10.60
0116 Fitter (Grade-1) Sundries TOTAL 1.00 784.00 784.00
9999 Add 1 % Water charges on "W" TOTAL 10.00 2.12 21.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 1815.80
Add 15% CPOH on "Y" TOTAL 18.16
Add Cess @ 1% on "Z" 1833.96
Cost for100 Nos Cost of each Say 257.67
2091.63
313.74
2405.37
24.05
2429.43
24.29
24.30

26.79.2 5 mm thick

Code no Description Unit Quantity Rate Amount


0247 Detail of cost for 100 nos MATERIAL each L.S. 100.00 15.00 1500.00
9977 5 mm thick sim pad Carriage of material LABOUR day L.S. 5.00 2.12 10.60
0116 Fitter (Grade-1) Sundries TOTAL 1.00 784.00 784.00
9999 Add 1 % Water charges on "W" TOTAL 10.00 2.12 21.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 2315.80
Add 15% CPOH on "Y" TOTAL 23.16
Add Cess @ 1% on "Z" 2338.96
Cost for100 Nos Cost of each Say 328.62
2667.58
400.14
3067.72
30.68
3098.40
30.98
31.00

26.79.3 10 mm thick
Code no Description Unit Quantity Rate Amount
0248 Detail of cost for 100 nos MATERIAL each L.S 100.00 25.00 2500.00
9977 10 mm thick sim pad Carriage of material LABOUR day LS 5.00 2.12 10.60
0116 Fitter (Grade-1) Sundries TOTAL 1.00 784.00 784.00
9999 Add 1 % Water charges on "W" TOTAL 10.00 2.12 21.20
Add GST on "X" (multiplying factor 0.1405) TOTAL 3315.80
Add 15% CPOH on "Y" TOTAL 33.16
Add Cess @ 1% on "Z" 3348.96
Cost for100 Nos Cost of each Say 470.53
3819.49
572.92
4392.41
43.92
4436.33
44.36
44.35

26.80 Providing & Grouting of dowel tubes / Shear keys / Joints of precast members with M-60 grade cementitious gro
Shrink) of approved make by suitable means ( Free flowing
/pump),curing etc. Complete as per directions of Engineer-in-charge. (The payment shall be made on the basis of actual we
approved grout injected.)
26.80.1 Stirrer mixed cementitious grout (non shrink) of approved make in dowel tubes / Shear keys / Joints of precast
members.

Code no Description Unit Quantity Rate Amount

1251 Detail of cost for 250 kgs non shrink cementitious grout kg tonne 262.50 28.00 7350.00
2209 including 5 % wastage L.S. 0.25 145.72 36.43
9999 M-60 grade cemetitious grout (Non Shrink) day day day 2250.00 2.12 4770.00
0122 Carriage of cementitious material 1.00 784.00 784.00
0155 Grouting charges of Stirrer mixed cementitious grout, 1.00 749.00 749.00
0161 rubber, pipe and other accessories hire charges of plant, 1.00 645.00 645.00
machinery including necessary fuel and transportation of 14334.43
site 143.34
LABOUR 14477.77
Mason (for plaster of paris work) 1st class Masson 2034.13
(Average)
Helper (Technician) 16511.90
TOTAL 2476.79
Add 1 % Water charges on "W" TOTAL 18988.69
Add GST on "X" (multiplying factor 0.1405) TOTAL 189.89
19178.57
Add 15% CPOH on "Y" TOTAL 76.71
Add Cess @ 1% on "Z" 76.70
Cost for 250 Kgs Cost of 1 Kg
Say
26.81 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted
on warp knitting machines having density 100grams/sqm and shading coefficient minimum 75% around the construction site/ for vertical extensi
requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (O
payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net sha
property of the contractor on completion of the work)

Code Description Unit Quantity Rate Amount


8761 Details of cost for 300 sqm. MATERIALS: sqm L.S. 300.00 22.00 6600.00
9999 Scaffolding net day L.S. 3.00 2.12 6.36
0114 Carriage 1.00 645.00 -1650.00
9999 Less Salvage value taken 25% on (P) LABOUR: 10.00 2.12 645.00
Beldar 21.20
Sundries for tying the net Total 5622.56
Add 1% for water charges Total 56.23
Add GST on "X" (multiplying factor 0.1405) 5678.79
Total 797.87
Add CPOH @ 15% on "Y" 6476.65
Total 971.50
Add Cess @ 1% on "Z"
7448.15
Cost of 300 Sqm. Cost of 1 Sqm. 74.48
Say 7522.63
25.08
25.10

26.82 Providing and laying rigid EPS (cellular plastic material) blocks conforming to ASTM standards/specifications of minimum density 21.60 Kg/
floors, steps, stage etc. of required size and shape as per direction of the Engineer-in-Charge. This shall include the following operation.
The EPS blocks shall be cut to required shape and sizes including cuttings for passing of services, joined together with synthetic resin adhesiv
relevant specifications and packed/placed in position for stepped floor or platform formation. The top and sides surfaces to be provided with GI woven
mesh of aperture 5.45 mm (with wire dia 0.90 mm) secured to EPS blocks with wire pins/clips. Horizontal top surface to be provided with 20 mm thic
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate upto 6mm chippings) and vertical surface to be provided with 12mm cem
1:4 (1 cement : 4 coarse sand). The concrete/plastered surfaces so prepared shall be scratched with wire brushes to form burrs, so as to act as base fo
or veneering/panelling to be done later as per approved design (which shall be paid for separately complete as per direction of the Engineer-in-Charge

Code Description Unit Quantity Rate Amount


Details of cost for a Lecture Hall of area 8.40 x 16.00=
134.40 Sqm
Assuming stepped floor for a Lecture Hall having 8 rows and each
row by 100mm higher than the previous one. (Assuming 8 rows
1.50 meter wide and four columns also
1.5 meter wide with 1.2 meter wide passage between row 1 and 2, 3
and 4 and front lecturer pedestrian.
Material
EPS blocks in sizes of = 1.20x1.20x0.10 m 8.40 m x 12 m x 0.45 m =
45.90 cum
8.40 m x 3 m x 0.15 m = 3.78 cum
49.68 cum Say = 50.00 cum 50 cum @ 21.60 Kg/cum. Total = 1080.00
kg

5744 EPS blocks kg 1080.00 150.00 162000.00


GI woven mesh of aperture 5.45 mm (with wire of dia
0.90 mm = 134.40 sqm + 13.60 sqm = 150.00 sqm @
1.61 Kg/sqm. Total = 241.50 kgs
5745 GI woven mesh of aperture 5.45 mm (with wire of dia kg 241.50 60.00 14490.00
0.90 mm
Total surface area to be joined 504 sqm considering 1/6th
area for adhesive i.e. 84 sqm @ 100 Gm/sqm. Total = 8.50
kgs
5746 SR adhesive for joining EPS blocks kg 8.50 180.00 1530.00

9999 Wire pins/clips to secure IRC mesh to EPS blocks L.S. 675.00 2.12 1431.00
9999 T&P sundries i/c cutting tools etc. L.S. 340.00 2.12 720.80
Labour:- For cutting arranging & packing the EPS blocks in
position including jointing with SR adhesive and making
arranging/cutting for fixing of services and fixing IRC
welded mesh to EPS blocks.
0156 Fitter/Carpenter (average) day 2.00 749.00 1498.00
0114 Beldar day 1.00 645.00 645.00
Cement concrete 1:2:4 (1 cement : 2 cement sand : 4
graded stone clippings upto 6 mm size)
134.4x0.025 = 3.36 cum
4.1.3 Rate as per item no 4.1.3 SH:4 (Cement Concrete) cum 3.36 7365.15 24746.90
12mm cement plaster 1:4 (1 cement : 4 coarse sand)
13.4.1 Rate as per item no 13.4.1 SH:13 (Finishing) sqm 9.24 307.25 2838.99
0155 Mason (average) for making burrs day 1.00 749.00 749.00
Total 210649.69
Add 1 % Water charges on "W-A" 1830.64
TOTAL 212480.33
Add GST on "X-A" (multiplying factor 0.1405) 25977.67
TOTAL 238458.00
Add 15% CPOH on "Y-A" 31630.82
TOTAL 270088.82
Add Cess @ 1% on "Z-A" 2425.03
Cost of 134.40 sqm 272513.85
Cost of 1 sqm 2027.63
Say 2027.65
26.83 Applying stamping finish to the top surface of freshly laid plain/reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool deck
yards as per direction of the Engineer-in-Charge. The process shall include the following:-
• The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved
@ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake a
only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent ca
the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of c
three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining conc
till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting.
• After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with
hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.
• The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 1
rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin
protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not
included in this item which shall be paid separately.)

Code Description Unit Quantity Rate Amount


Details of cost for 100 Sqm
Material
7224 Concrete hardener Kg 297.00 20.00 5940.00
7225 Release agent Litres 1.35 200.00 270.00
7226 Sealer Kg 17.50 260.00 4550.00
7227 PU resin top coat Kg 23.00 225.00 5175.00
9999 T&P like tollers of various sizes dewatering machines i/c floaters L.S. 6000.00 2.12 12720.00
and suckers, brushes and water jet etc. (rentals only)
Labour for spreading/sprinkling the floor hardeners, floating,
trowelling, spreading the release agent, stamp molds, tapping of
molds into concrete shifting of molds for repeat process,
grouting the joints and applying sealers and finishing etc.

0169 Specialized technicians day 6.00 853.00 5118.00


0124 Assistant/Operators (Second Class Mason) day 6.00 714.00 4284.00
0123 Mason 1st class for grouting repairs & applying sealer etc. day 2.00 784.00 1568.00
0131 Painter day 1.00 714.00 714.00
0114 Helper/Beldar day 10.00 645.00 6450.00
9999 Sundries for grouts pigments etc. L.S. 500.00 2.12 1060.00
Total 47849.00
Add 1 % Water charges on "W" 478.49
TOTAL 48327.49
Add GST on "X" (multiplying factor 0.1405) 6790.01
TOTAL 55117.50
Add 15% CPOH on "Y" 8267.63
TOTAL 63385.13
Add Cess @ 1% on "Z" 633.85
Cost of 100 sqm 64018.98
Cost of 1 sqm 640.19
Say 640.20
26.84 Supplying and laying of Uni-Axial Woven Polyster Geogrid conforming to MORTH 3100 and IRC113, as soil reinforcement/basal reinfor
including accessories like tie-strips, nuts & bolts and loops/lugs for joining reinforcing elements with the facia pannels, overlaps and other protective
for synthetic geo-grids and all other activities required for reinforced soil walls, slopes etc complete as per design requirements, manufac
specifications and as per direction of engineer-in- charge.
26.84.1 Uni Axial Woven polyster geogrid of minimum tensile strength 40KN/m in the Longitudinal direction and 20 KN/m in the Transverse d
Code Description Unit Quantity Rate Rs. Amount Rs.
Details of Cost for 300 Sqm.
MATERIALS:
8979 Uni Axial Woven polyster geogrid of minimum tensile strength
40KN/m in the Longitudinal direction and 20
KN/m in the Transverse direction.
sqm 300.00 139.00 41700.00
Add 5 percent of the cost of reinforcing elements geogrid for wastage
and accessories like tie-strips, nuts and bolts and loops/lungs for
joining reinforcing elements with the facia panels, overlaps and
other protective elements for geogrid and all other activities
required to complete the item in all respect including transportation.
i.e 5% of (P)
2085.00

LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 50054.04
Add 1 % Water charges on "W" 500.54
TOTAL 50554.58
Add GST on "X" (multiplying factor 0.1405) 7102.92
TOTAL 57657.50
Add 15% CPOH on "Y" 8648.62
TOTAL 66306.12
Add Cess @ 1% on "Z" 663.06
Cost of 300 sqm 66969.19
Cost of 1 sqm 223.23
Say 223.25

26.84.2 Uni Axial Woven polyster geogrid of minimum tensile strength 60KN/m in the Longitudinal direction and 20 KN/m in the Transverse d

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8980 Uni Axial Woven polyster geogrid of minimum tensile
strength 60KN/m in the Longitudinal direction and 20
KN/m in the Transverse direction. sqm 300.00 161.00 48300.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 2415.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 56984.04
Add 1 % Water charges on "W" 569.84
TOTAL 57553.88
Add GST on "X" (multiplying factor 0.1405) 8086.32
TOTAL 65640.20
Add 15% CPOH on "Y" 9846.03
TOTAL 75486.23
Add Cess @ 1% on "Z" 754.86
Cost of 300 sqm 76241.09
Cost of 1 sqm 254.14
Say 254.15
26.84.3 Uni Axial Woven polyster geogrid of minimum tensile strength 80 KN/m in the Longitudinal direction and 30
KN/m in the Transverse direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8981 Uni Axial Woven polyster geogrid of minimum tensile
strength 80 KN/m in the Longitudinal direction and 30
KN/m in the Transverse direction. sqm 300.00 205.00 61500.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 3075.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 70844.04
Add 1 % Water charges on "W" 708.44
TOTAL 71552.48
Add GST on "X" (multiplying factor 0.1405) 10053.12
TOTAL 81605.60
Add 15% CPOH on "Y" 12240.84
TOTAL 93846.44
Add Cess @ 1% on "Z" 938.46
Cost of 300 sqm 94784.91
Cost of 1 sqm 315.95
Say 315.95

26.84.4 Uni Axial Woven polyster geogrid of minimum tensile strength 100KN/m in the Longitudinal direction and 30 KN/m in the Transverse

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8982 Uni Axial Woven polyster geogrid of minimum tensile
strength 100KN/m in the Longitudinal direction and
30KN/m in the Transverse direction. sqm 300.00 237.00 71100.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 3555.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 80924.04
Add 1 % Water charges on "W" 809.24
TOTAL 81733.28
Add GST on "X" (multiplying factor 0.1405) 11483.53

TOTAL 93216.81
Add 15% CPOH on "Y" 13982.52
TOTAL 107199.33
Add Cess @ 1% on "Z" 1071.99
Cost of 300 sqm 108271.32
Cost of 1 sqm 360.90
Say 360.90
26.84.5 Uni Axial Woven polyster geogrid of minimum tensile strength 120KN/m in the Longitudinal direction and 30 KN/m in the Transverse

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8983 Uni Axial Woven polyster geogrid of minimum tensile
strength 120KN/m in the Longitudinal direction and
30KN/m in the Transverse direction. sqm 300.00 254.00 76200.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 3810.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 86279.04
Add 1 % Water charges on "W" 862.79
TOTAL 87141.83
Add GST on "X" (multiplying factor 0.1405) 12243.43
TOTAL 99385.26
Add 15% CPOH on "Y" 14907.79
TOTAL 114293.05
Add Cess @ 1% on "Z" 1142.93
Cost of 300 sqm 115435.98
Cost of 1 sqm 384.79
Say 384.80

26.84.6 Uni Axial Woven polyster geogrid of minimum tensile strength 150KN/m in the Longitudinal direction and 30 KN/m in the Transverse

Code Description Unit Quantity Rate Rs. Amount Rs.


8984 Details of Cost for 300 Sqm. MATERIALS:
0128 Uni Axial Woven polyster geogrid of minimum tensile strength
150KN/m in the Longitudinal direction and 30 KN/m in the
Transverse direction.
Add 5 percent of the cost of reinforcing elements geogrid for
wastage and accessories like tie-strips, nuts and bolts and
loops/lungs for joining reinforcing elements with the facia
panels, overlaps and other protective elements for geogrid and 95700.00
sqm 300.00 319.00 4785.00
all other activities required to complete the item in all respect day 0.36 714.00
including transportation. i.e 5% of (P) LABOUR: 257.04
Mate

0114 Beldar day 6.00 645.00 3870.00


0139 Skilled Beldar day 3.00 714.00 2142.00
Total 106754.04
Add 1 % Water charges on "W" 1067.54
TOTAL 107821.58
Add GST on "X" (multiplying factor 0.1405) 15148.93
TOTAL 122970.51
Add 15% CPOH on "Y" 18445.58
TOTAL 141416.09
Add Cess @ 1% on "Z" 1414.16
Cost of 300 sqm 142830.25
Cost of 1 sqm 476.10
Say 476.10

26.84.7 Uni Axial Woven polyster geogrid of minimum tensile strength 200KN/m in the Longitudinal direction and 30 KN/m in the Transvers
direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8985 Uni Axial Woven polyster geogrid of minimum tensile
strength 200KN/m in the Longitudinal direction and 30
KN/m in the Transverse direction. sqm 300.00 375.00 112500.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 5625.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 124394.04
Add 1 % Water charges on "W" 1243.94
TOTAL 125637.98
Add GST on "X" (multiplying factor 0.1405) 17652.14
TOTAL 143290.12
Add 15% CPOH on "Y" 21493.52
TOTAL 164783.63
Add Cess @ 1% on "Z" 1647.84
Cost of 300 sqm 166431.47
Cost of 1 sqm 554.77
Say 554.75
26.84.8 Uni Axial Woven polyster geogrid of minimum tensile strength 250KN/m in the Longitudinal direction and 30
KN/m in the Transverse direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8986 Uni Axial Woven polyster geogrid of minimum tensile
strength 250KN/m in the Longitudinal direction and
30KN/m in the Transverse direction. sqm 300.00 458.00 137400.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation. i.e 5% of (P) 6870.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 150539.04
Add 1 % Water charges on "W" 1505.39
TOTAL 152044.43
Add GST on "X" (multiplying factor 0.1405) 21362.24
TOTAL 173406.67
Add 15% CPOH on "Y" 26011.00
TOTAL 199417.67
Add Cess @ 1% on "Z" 1994.18
Cost of 300 sqm 201411.85
Cost of 1 sqm 671.37
Say 671.35

26.84.9 Uni Axial Woven polyster geogrid of minimum tensile strength 300KN/m in the Longitudinal direction and 30 KN/m in the Transverse

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8987 Uni Axial Woven polyster geogrid of minimum tensile strength
300KN/m in the Longitudinal direction and
30KN/m in the Transverse direction.
sqm 300.00 529.00 158700.00
Add 5 percent of the cost of reinforcing elements geogrid for
wastage and accessories like tie-strips, nuts and bolts and
loops/lungs for joining reinforcing elements with the facia
panels, overlaps and other protective elements for geogrid and
all other activities required to complete the item in all respect
including transportation. i.e 5% of (P)

7935.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00

0139 Skilled Beldar day 3.00 714.00 2142.00


Total 172904.04
Add 1 % Water charges on "W" 1729.04
TOTAL 174633.08
Add GST on "X" (multiplying factor 0.1405) 24535.95
TOTAL 199169.03
Add 15% CPOH on "Y" 29875.35
TOTAL 229044.38
Add Cess @ 1% on "Z" 2290.44
Cost of 300 sqm 231334.83
Cost of 1 sqm 771.12
Say 771.10
26.85 Supplying and laying of Bi-Axial Woven Polyster Geogrid conforming to MORTH 3100 and IRC113, as soil reinforcement/basal reinforcement o
road base and sub base, area stalilization, track bed stabilization, load transfer platforms Including accessories like tie-strips, nuts & bolts and loops/lugs
reinforcing elements with the facia pannels, overlaps and other protective elements for synthetic geo-grids and all other activities required etc. complet
design requirements, manufacturer specifications and as per direction of engineer-in- charge.
26.85.1 Bi Axial Woven polyster geogrid of minimum tensile strength 20KN/m in both Longitudinal and Transverse direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8988 Bi Axial Woven polyster geogrid of minimum tensile
strength 20KN/m in both Longitudinal and Transverse
direction. sqm 300.00 114.00 34200.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 1710.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 42179.04
Add 1 % Water charges on "W" 421.79
TOTAL 42600.83
Add GST on "X" (multiplying factor 0.1405) 5985.42
TOTAL 48586.25
Add 15% CPOH on "Y" 7287.94
TOTAL 55874.18
Add Cess @ 1% on "Z" 558.74
Cost of 300 sqm 56432.93
Cost of 1 sqm 188.11
Say 188.10
26.85.2 Bi Axial Woven polyster geogrid of minimum tensile strength 40KN/m in both Longitudinal and Transverse
direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm.
MATERIALS:
8989 Bi Axial Woven polyster geogrid of minimume tensile
strength 40KN/m in both Longitudinal and Transverse
direction. sqm 300.00 173.00 51900.00
Add 5 percent of the cost of reinforcing elements geogrid
for wastage and accessories like tie-strips, nuts and bolts
and loops/lungs for joining reinforcing elements with the
facia panels, overlaps and other protective elements for
geogrid and all other activities required to complete the
item in all respect including transportation.i.e 5% of (P) 2595.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 60764.04
Add 1 % Water charges on "W" 607.64
TOTAL 61371.68
Add GST on "X" (multiplying factor 0.1405) 8622.72
TOTAL 69994.40
Add 15% CPOH on "Y" 10499.16
TOTAL 80493.56
Add Cess @ 1% on "Z" 804.94
Cost of 300 sqm 81298.50
Cost of 1 sqm 270.99
Say 271.00

26.85.3 Bi Axial Woven polyster geogrid of minimum tensile strength 60KN/m in both Longitudinal and Transverse direction.

Code Description Unit Quantity Rate Rs. Amount Rs.


Details of Cost for 300 Sqm. MATERIALS:

8990 Bi Axial Woven polyster geogrid of minimum tensile strength


60KN/m in both Longitudinal and Transverse
direction.
sqm 300.00 223.00 66900.00
Add 5 percent of the cost of reinforcing elements geogrid for
wastage and accessories like tie-strips, nuts and bolts and
loops/lungs for joining reinforcing elements with the facia
panels, overlaps and other protective elements for geogrid and
all other activities required to complete the
item in all respect including transportation.i.e 5% of (P)

3345.00
LABOUR:
0128 Mate day 0.36 714.00 257.04
0114 Beldar day 6.00 645.00 3870.00
0139 Skilled Beldar day 3.00 714.00 2142.00
Total 76514.04
Add 1 % Water charges on "W" 765.14
TOTAL 77279.18
Add GST on "X" (multiplying factor 0.1405) 10857.72
TOTAL 88136.91
Add 15% CPOH on "Y" 13220.54
TOTAL 101357.44
Add Cess @ 1% on "Z" 1013.57
Cost of 300 sqm 102371.02
Cost of 1 sqm 341.24
Say 341.25
26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory win
other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ ric
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent ce
screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Fa
N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with
of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of require
length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile di
on plus side shall be acceptable but no extra payment on this account shall be made.
26.86.1 Frame size 45 x 70 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre)
MATERIAL
5747 Factory made single extruded WPC (Wood Polymer metre 5.20 375.00 1950.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 45 x 70 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 2457.23
Add 1 % Water charges on "W" 24.57
TOTAL 2481.80
Add GST on ''X'' (multiplying factor 0.1405) 348.69
TOTAL 2830.50
Add 15% CPOH on "Y" 424.57
TOTAL 3319.35
Add Cess @ 1% on "Z" 33.19
Cost of 5.20 metre 3352.54
Cost of 1 metre 644.72
Say 644.70
26.86.2 Frame size 45 x 85 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre.)
MATERIAL
5748 Factory made single extruded WPC (Wood Polymer metre 5.20 525.00 2730.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 45 x 85 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 3237.23
Add 1 % Water charges on "W" 32.37
TOTAL 3269.60
Add GST on ''X'' (multiplying factor 0.1405) 459.38
TOTAL 3728.98
Add 15% CPOH on "Y" 559.35
TOTAL 4288.33
Add Cess @ 1% on "Z" 42.88
Cost of 5.20 metre 4331.21
Cost of 1 metre 832.93
Say 832.95

26.86.3 Frame size 50 x 100 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre)
MATERIAL
5749 Factory made single extruded WPC (Wood Polymer metre 5.20 540.00 2808.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 50 x 100 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 3315.23
Add 1 % Water charges on "W" 33.15
TOTAL 3348.38
Add GST on ''X'' (multiplying factor 0.1405) 470.45
TOTAL 3818.83
Add 15% CPOH on "Y" 572.82
TOTAL 4391.65
Add Cess @ 1% on "Z" 43.92
Cost of 5.20 metre 4435.57
Cost of 1 metre 852.99
Say 853.00
26.86.4 Frame size 50 x 125 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre.)
MATERIAL
5750 Factory made single extruded WPC (Wood Polymer metre 5.20 630.00 3276.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 50 x 125 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 3783.23
Add 1 % Water charges on "W" 37.83
TOTAL 3821.06
Add GST on ''X'' (multiplying factor 0.1405) 536.86
TOTAL 4357.92
Add 15% CPOH on "Y" 653.69
TOTAL 5011.61
Add Cess @ 1% on "Z" 50.12
Cost of 5.20 metre 5061.73
Cost of 1 metre 973.41
Say 973.40

26.86.5 Frame size 65 x 100 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre.)
MATERIAL
5751 Factory made single extruded WPC (Wood Polymer metre 5.20 650.00 3380.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 65 x 100 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 3887.23
Add 1 % Water charges on "W" 38.87
TOTAL 3926.10
Add GST on ''X'' (multiplying factor 0.1405) 551.62
TOTAL 4477.72
Add 15% CPOH on "Y" 671.66
TOTAL 5149.38
Add Cess @ 1% on "Z" 51.49
Cost of 5.20 metre 5200.87
Cost of 1 metre 1000.17
Say 1000.15
26.86.6 Frame size 65 x 125 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre.)
MATERIAL
5752 Factory made single extruded WPC (Wood Polymer metre 5.20 835.00 4342.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 65 x 125 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 4849.23
Add 1 % Water charges on "W" 48.49
TOTAL 4897.72
Add GST on ''X'' (multiplying factor 0.1405) 688.13
TOTAL 5585.85
Add 15% CPOH on "Y" 837.88
TOTAL 6423.73
Add Cess @ 1% on "Z" 64.24
Cost of 5.20 metre 6487.97
Cost of 1 metre 1247.69
Say 1247.70

26.86.7 Frame size 65 x 150 mm

Code Description Unit Quantity Rate Amount


Details of cost for 5.20 metre of door frame/chowkhat
size 1.00 x 2.10 metre.
(1.00+2.10+2.10=5.20 metre.)
MATERIAL
5753 Factory made single extruded WPC (Wood Polymer metre 5.20 1010.00 5252.00
Composite) solid door/window, clerestory windows &
other Frames/Chowkhat of frame size 65 x 150 mm
including carriage of frame
LABOUR
For fabrication and fixing in position
0156 Carpenter (average) day 0.10 749.00 74.90
0155 Mason (average) day 0.17 749.00 127.33
0114 Beldar day 0.44 645.00 283.80
9999 Sundries includes PVC solvent cement and SS screws etc. L.S. 10.00 2.12 21.20
TOTAL 5759.23
Add 1 % Water charges on "W" 57.59
TOTAL 5816.82
Add GST on ''X'' (multiplying factor 0.1405) 817.26
TOTAL 6634.09
Add 15% CPOH on "Y" 995.11
TOTAL 7629.20
Add Cess @ 1% on "Z" 76.29
Cost of 5.20 metre 7705.49
Cost of 1 metre 1481.83
Say 1481.85
26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter
of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice hus
husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength
(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A c
property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with
full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S
be paid separately)
26.87.1 30 mm thick

Code Description Unit Quantity Rate Amount


Details of cost for door shutter of size 2.20 sqm.
MATERIAL
5754 Factory made single extruded WPC (Wood Polymer sqm 2.20 2800.00 6160.00
Composite) solid plain flush door shutter 30mm thick
9977 Carriage of door shutter L.S. 29.64 2.12 62.84
LABOUR
For fixing shutter
0156 Carpenter (average) day 0.20 749.00 149.80
0114 Beldar day 0.20 645.00 129.00
TOTAL 6501.64
Add 1 % Water charges on "W" 65.02
TOTAL 6566.65
Add GST on ''X'' (multiplying factor 0.1405) 922.61
TOTAL 7489.27
Add 15% CPOH on "Y" 1123.39
TOTAL 8612.66
Add Cess @ 1% on "Z" 86.13
Cost of 2.20 sqm. 8698.78
Cost of 1 sqm. 3953.99
Say 3954.00

26.87.2 35 mm thick

Code Description Unit Quantity Rate Amount


Details of cost for door shutter of size 2.20 sqm.
MATERIAL
5755 Factory made single extruded WPC (Wood Polymer sqm 2.20 3250.00 7150.00
Composite) solid plain flush door shutter 35 mm thick
9977 Carriage of door shutter L.S. 29.64 2.12 62.84
LABOUR
For fixing shutter
0156 Carpenter (average) day 0.20 749.00 149.80
0114 Beldar day 0.20 645.00 129.00
TOTAL 7491.64
Add 1 % Water charges on "W" 74.92
TOTAL 7566.55
Add GST on ''X'' (multiplying factor 0.1405) 1063.10
TOTAL 8629.65
Add 15% CPOH on "Y" 1294.45
TOTAL 9924.10
Add Cess @ 1% on "Z" 99.24
Cost of 2.20 sqm. 10023.34
Cost of 1 sqm. 4556.06
Say 4556.05
26.88 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush
door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood pow
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdra
strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spr
flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of mi
microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with
full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessa
screws shall be paid separately)
26.88.1 30 mm thick

Code Description Unit Quantity Rate Amount


Details of cost for door shutter of size 2.20 sqm.
MATERIAL
5754 Factory made single extruded WPC (Wood Polymer sqm 2.20 2800.00 6160.00
Composite) solid plain flush door shutter 30mm thick
5761 PVC laminated foil of minimum thickness of 14 microns of sqm 4.40 125.00 550.00
approved design
9977 Carriage of door shutter L.S. 29.64 2.12 62.84
LABOUR
For pasting PVC laminated foil to door shutter and fixing
door shutter at position
0156 Carpenter (average) day 0.20 749.00 149.80
0114 Beldar day 0.30 645.00 193.50
TOTAL 7116.14
Add 1 % Water charges on "W" 71.16
TOTAL 7187.30
Add GST on ''X'' (multiplying factor 0.1405) 1009.82
TOTAL 8197.11
Add 15% CPOH on "Y" 1229.57
TOTAL 9426.68
Add Cess @ 1% on "Z" 94.27
Cost of 2.20 sqm. 9520.95
Cost of 1 sqm. 4327.70
Say 4327.70

26.88.2 35 mm thick

Code Description Unit Quantity Rate Amount


5755 Details of cost for door shutter of size 2.20 sqm. MATERIAL sqm sqm L.S. 2.20 3250.00 7150.00
5761 Factory made single extruded WPC (Wood Polymer day day 4.40 125.00 550.00
9977 Composite) solid plain flush door shutter 35 mm thick 29.64 2.12 62.84
0156 PVC laminated foil of minimum thickness of 14 microns of approved 0.20 749.00 149.80
0114 design 0.30 645.00 193.50
Carriage of door shutter LABOUR
For pasting PVC laminated foil to door shutter and fixing door
shutter at position
Carpenter (average)
Beldar

TOTAL 8106.14
Add 1 % Water charges on "W" TOTAL 81.06
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 8187.20
Add 15% CPOH on "Y" TOTAL 1150.30
Add Cess @ 1% on "Z" Cost of 2.20 sqm. 9337.50
Cost of 1 sqm. 1400.62
Say 10738.12
107.38
10845.51
4929.78
4929.80
26.89 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board la
with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitch
cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw wit
strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread o
Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges
clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In
(Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
26.89.1 18 mm thick

Code Description Unit Quantity Rate Amount


5756 Details of cost for 18 mm thick WPC board for cupboard shutter of sqm 2.16 1750.00 3780.00
5761 size 2.0x1.08 metre = 2.16 sqm sqm L.S. 2.16 125.00 270.00
9977 MATERIAL L.S. 5.00 2.12 10.60
9999 Factory made single extruded WPC (Wood Polymer day day 20.00 2.12 42.40
0156 Composite) solid plain white colored board of 18 mm thick 0.20 749.00 149.80
0114 PVC laminated foil of minimum thickness of 14 microns of 0.20 645.00 129.00
approved design Carriage of board Sundries LABOUR 4381.80
Carpenter (average) Beldar 43.82
TOTAL 4425.62
Add 1 % Water charges on "W" TOTAL 621.80
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 5047.42
Add 15% CPOH on "Y" TOTAL 757.11
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 5804.53
Cost of 1 sqm. 58.05
Say 5862.58
2714.16
2714.15

26.89.2 25 mm thick

Code Description Unit Quantity Rate Amount


5757 Details of cost for 25 mm thick WPC board for cupboard shutter of sqm 2.16 2360.00 5097.60
5761 size 2.0x1.08 metre = 2.16 sqm sqm L.S. 2.16 125.00 270.00
9977 MATERIAL L.S. 5.00 2.12 10.60
9999 Factory made single extruded WPC (Wood Polymer day day 20.00 2.12 42.40
0156 Composite) solid plain white colored board of 25 mm thick 0.20 749.00 149.80
0114 PVC laminated foil of minimum thickness of 14 microns of 0.20 645.00 129.00
approved design Carriage of board Sundries LABOUR 5699.40
Carpenter (average) Beldar 56.99
TOTAL 5756.39
Add 1 % Water charges on "W" TOTAL 808.77
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 6565.17
Add 15% CPOH on "Y" TOTAL 984.78
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 7549.94
Cost of 1 sqm. 75.50
Say 7625.44
3530.30
3530.30

26.90 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and
bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fi
(wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and
withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resista
spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel s
all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately)
26.90.1 6 mm thick

Code Description Unit Quantity Rate Amount


5758 Details of cost for 6 mm thick WPC board for backing of sqm L.S. 2.16 600.00 1296.00
9977 cupboard of size 2.0x1.08 metre = 2.16 sqm day 5.00 2.12 10.60
0156 MATERIAL day 0.20 749.00 149.80
0114 Factory made single extruded WPC (Wood Polymer 0.20 645.00 129.00
Composite) solid plain white colored board of 6 mm thick Carriage 1585.40
of board 15.85
LABOUR 1601.25
Carpenter (average) Beldar 224.98
TOTAL 1826.23
Add 1 % Water charges on "W" TOTAL 273.93
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 2100.16
Add 15% CPOH on "Y" TOTAL 21.00
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 2121.17
Cost of 1 sqm. 982.02
Say 982.00

26.90.2 12 mm thick
Code Description Unit Quantity Rate Amount
5759 Details of cost for 12 mm thick WPC board for cupboard shutter of sqm 2.16 1020.00 2203.20
9977 size 2.0x1.08 metre = 2.16 sqm L.S. 5.00 2.12 10.60
0156 MATERIAL day day 0.20 749.00 149.80
0114 Factory made single extruded WPC (Wood Polymer 0.20 645.00 129.00
Composite) solid plain white colored board of 12 mm thick 2492.60
Carriage of board 24.93
LABOUR 2517.53
Carpenter (average) Beldar 353.71
TOTAL 2871.24
Add 1 % Water charges on "W" TOTAL 430.69
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 3301.92
Add 15% CPOH on "Y" TOTAL 33.02
Add Cess @ 1% on "Z" Cost of 2.16 sqm. 3334.94
Cost of 1 sqm. 1543.96
Say 1543.95

26.91 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Comp
numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising
polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(m
toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compre
strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termit
proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including apply
priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and
screws etc., all complete as per direction of Engineer-In- Charge.
(Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

Code Description Unit Quantity Rate Amount


Details of cost for WPC jali of size 1.80 x 2.40 metre = 4.32 sqm
MATERIAL
Factory made 18 mm thick single extruded WPC (Wood
Polymer Composite) solid plain white colour board Jali including
carriage
5760 Sundries sqm 4.32 2260.00 9763.20
9999 LABOUR L.S. 10.00 2.12 21.20
0156 Carpenter (average) day 0.20 749.00 149.80
0114 Beldar TOTAL day 0.30 645.00 193.50
Add 1 % Water charges on "W" TOTAL 10127.70
Add GST on ''X'' (multiplying factor 0.1405) TOTAL 101.28
Add 15% CPOH on "Y" TOTAL 10228.98
Add Cess @ 1% on "Z" Cost of 4.32 sqm. 1437.17
Cost of 1 sqm. 11666.15
Say 1749.92
13416.07
134.16
13550.23
3136.63
3136.65

Providing and fixing of façade at all heights with extruded hollow Clay / Terracotta ventilated rainscreen tiles of height 250/ 300/ 400mm and length of 595 mm of app
texture,design and pattern having Flexural Strength/ Modulus of Rupture of ≥ 14 N/m² and maximum water absorption of 10% tested as per ISO 10545-4:2004(E)
26.92 10545-3:1995 respectively in true level fixed to a supporting aluminium framework(Alloy 6063 T5/T6) consisting of vertical 'T' (for intermediates)/ 'L'(for end
26.92. termination)/ Tubular sections (at corners)of size 80x60x2mm/ 40x60x2mm/ 40x40x2mm respectively, spaced at maximum spacing of 600mm c/c matching t
vertical grid, and horizontal aluminium 'C'-clamps of size 56x25x2mm thickness of length 150mm at junction of tiles and of length 75mm at wall ends/ corners fixed on
1 vertical sections at spacing of 250/ 300/ 400mm c/c matching to the tile horizontal grid with two numbers of self-drilling / self-tapping SS screws of size 5.5x25 mm wit
washers.
The vertical 'T'/'L/ Tubular' sections shall be fixed to the wall using HDG (hot-dip-galvanized) steel L-brackets (galvanizing thickness of minimum 80 microns)of size 110
intermediate vertical aluminium profiles and of size 220x110x12 mm at outer corners and stainless steel grade 304,M10 full threaded anchor fasteners with nylon slee
long (for brick work) and M8 expansion anchor fasteners 75mm long for concrete surface, spacing of brackets to be based on a structural/ static calculation. The brack
of length 175mm at junction of two vertical aluminium profiles and of length 100mm at intermediate points of vertical profiles and shall be fixed to the vertical alumin
Tubular profiles using two numbers self-drilling/ self-tapping SS screws of size 5.5x25mm with EPDM washers.
EPDM gaskets to be fixed in between brackets and vertical profiles. The tiles shall be mounted on the ‘C’ clamps such that the tiles are supported at top and bottom at
The tiles shall be additionally secured to the horizontal ‘C’ clamps using special SS clips of required size which shall be inserted and pressed into position on the ‘C’ clam
the tiles and the cut-tiles shall be glued at points to the horizontal ‘C’ clamps by using MS Polymer sealant adhesive. The vertical joint open groove between two adjace
be 5mm. The tiles and system shall be designed to resist wind load as per IS 875 (Part 3) according to different zones. The tiles shall be installed using the ventilated rai
principle with provision for natural ventilation of the space between the façade tiles and the structural wall. The work shall be carried out as per specification, drawing
direction of the Engineer-in-Charge.
Note : Scaffolding wherever required to be paid separately.
With 16mm thickness (+/- 10%) terracotta tiles of grey colour

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 10.80 sqm (3.60 x 3.0 metre)
MATERIAL
Façade area = 10.80 sqm + Wastage @ 5% = 0.54 sqm.
Total = 11.34 sqm
5762 16mm thick extruded terracotta tiles of grey colour of size sqm 11.34 2152.80 24412.75
300 x 595mm
7306 Aluminium Tube / T Profile kgs 17.10 190.00 3249.00

1). At outer corners tubular section 40x40x2 mm =


2 nos. 3 mtr. long = 6.00 mtr. @ 0.82 kg/mtr. =
4.92 kg
2). At ends/termination angle 40x60x2 mm = 2 nos.
3 mtr. long = 6.00 mtr. @ 0.53 kg/mtr. = 3.18 kg
3). At intermediate T section 80x60x2mm = 4 nos.
3 mtr. long = 12.00 mtr. @ 0.75 kg/mtr. = 9.00 kg
(Total = 4.92+3.18+9.00 = 17.10 kg.
7306 Aluminium “C” Clamps of size 80x25x2 mm - 150mm kgs 7.24 190.00 1375.60

(i) 150mm longh = 4x11 no. = 44.00 nos. x 0.15 =


6.6 mtr. @ 0.628 kg/mtr. = 4.14 kg
(ii) 75mm long 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.628 kg/mtr.= 3.10 kg. Total=4.14 + 3.10 = 7.24 kg

7216 Self-Drilling/Self-Tapping Screws M-6 25mm long each 284.00 3.00 852.00
(a) Bracket to vertical profile - 32 Nos. (brackets) x2.00
nos. = 64.00 Nos
b) For fixing of C” clamps to vertical profile
(44+66=110)x2=220 nos.
Total = 220 Nos + 64 Nos = 284.00 Nos
1007 HDG Mild Steel Brackets (Minimum 18 microns quintal 0.6034 4950.00 2986.83
Galvanizing)
a) Wall bracket = 110x80x6 mm thick
(i) 100 mm long = 12x0.10= 1.20 Mtr @ 8.65 kg/mtr. =
10.38 kg
(ii) 175mm long = 12x0.175=2.10 mtr. @ 8.65 kg/mtr. =
18.17 kg
Total = 10.38 + 18.17 = 28.55 kg
b) Corner Bracket of size 200 x 100 x 12mm thick
(a) 100mm long - 4 Nos x0.10x = 0.40 mtr. @ 28.90 Kgs =
11.56 Kg
(b) 175mm long 4x0.175= 0.70 mtr. @ 28.90 kg/mtr. =
20.23 kg
Total = 11.56 + 20.23 = 31.79 kg. Total quantity of wall
and corner bracket = 60.34 kgs = 0.6034 quintal
7217 SS anchor Fasteners (RCC / Brick) – M-8x75mm/M- each 32.00 70.00 2240.00
10x100mm
8x4 nos. = 32 Nos Bracket
7390 EPDM Gaskets of size 100x80 mm metre 3.20 15.00 48.00
32x0.10=3.20 mtr.
7218 MS Polymer Sealant Adhesive litre 0.15 1200.00 180.00
Area = 10.8 Sqm + wastage @ 0.54 sqm. = 11.34 Sqm
Adhesive required = Approx. 150ml or 0.15 Ltr.
SS Clips
7219 SS Double Clip at intermediate each 140.00 7.00 980.00
7x10=70.00 Nos. x 2 clips = 140.00 clips
7220 SS Single clip at top and bottom each 28.00 4.00 112.00
7x4= 28 Nos. clips
LABOUR
0166 Installation charges for fixing of façade at all heights with sqm 10.80 645.00 6966.00
extruded hollow clay/terracotta ventillated rain screen
tiles
9999 Carriage of materials L.S. 125.00 2.12 265.00
9999 T&P and materials Lead & Lift L.S. 250.00 2.12 530.00
TOTAL 44197.18
Add 1 % Water charges on "W" 441.97
TOTAL 44639.15
Add GST on "X" (multiplying factor 0.1405) 6271.80
TOTAL 50910.95
Add 15% CPOH on "Y" 7636.64
TOTAL 58547.60
Add Cess @ 1% on "Z" 585.48
Cost of 10.80 sqm. 59133.07
Cost of 1 sqm 5475.28
Say 5475.30
26.92.2 With 16mm thickness (+/- 10%) terracotta tiles of other than grey colors
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 10.80 sqm (3.60 x 3.0 metre)
MATERIAL
Façade area = 10.80 sqm + Wastage @ 5% = 0.54sqm.
Total = 11.34 sqm
5763 16mm thick extruded terracotta tiles of other than grey sqm 11.34 1991.30 22581.34
colour of size 300 x 595mm
7306 Aluminium Tube / T Profile kgs 17.10 190.00 3249.00
1). At outer corners tubular section 40x40x2 mm =
2 nos. 3 mtr. long = 6.00 mtr. @ 0.82 kg/mtr. =
4.92 kg
2). At ends/termination angle 40x60x2 mm = 2 nos.
3 mtr. long = 6.00 mtr. @ 0.53 kg/mtr. = 3.18 kg
3). At intermediate T section 80x60x2mm = 4 nos. 3 mtr.
long = 12.00 mtr. @ 0.75 kg/mtr. = 9.00 kg
(Total = 4.92+3.18+9.00 = 17.10 kg.
7306 Aluminium “C” Clamps of size 56x25x2mm kgs 7.24 190.00 1375.60
(i) 150mm long = 4x11 no. = 44.00 nos. x 0.15 = 6.6 mtr.
@ 0.628 kg/mtr. = 4.14 kg
(ii) 75mm long 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.628 kg/mtr.= 3.10 kg.
Total=4.14 + 3.10 = 7.24 kg
7216 Self-Drilling/Self-Tapping Screws M-6 25mm long each 284.00 3.00 852.00
(a) Bracket to vertical profile - 32 Nos.x2.00 nos. = 64.00
Nos
b) For fixing of brackets to “C” clamps (44+66=110)x2=220
nos.
Total = 220 Nos + 64 Nos = 284.00 Nos
1007 HDG Mild Steel Brackets (Minimum 18 microns quintal 0.6034 4950.00 2986.83
Galvanizing)
a) Wall bracket - Average 110 x 80 = 6mm thick
(i) 100 mm long = 12x0.10= 1.20 Mtr @ 8.65 kg/mtr. =
10.38 kg
(ii) 175mm long = 12x0.175=2.10 mtr. @ 8.65 kg/mtr. =
18.17 kg
Total = 10.38 + 18.17 = 28.55 kg
b) Corner Bracket of size 200 x 100 x 12mm thick
(a) 100mm long - 4 Nos x0.10x = 0.40 mtr. @ 28.90 Kgs =
11.56 Kg
(b) 175mm long 4x0.175= 0.70 mtr. @ 28.90 kg/mtr. =
20.23 kg
Total = 11.56 + 20.23 = 31.79 kg. Total quantity of wall
and corner bracket = 60.34 kgs = 0.6034 quintal
7217 SS anchor Fasteners (RCC / Brick) – M-8x75 mm/M- each 32.00 70.00 2240.00
10x100mm
8x4 nos. = 32 Nos Bracket
7390 EPDM Gaskets of size 100x80 mm metre 3.20 15.00 48.00
32x0.10=3.20 mtr.
7218 MS Polymer Sealant Adhesive litre 0.15 1200.00 180.00
Area - 10.8 Sqm + wastage @ 0.54 sqm. Total =11.34 Sqm
Adhesive required = Approx. 150ml or 0.15 ltr.
SS Clips
7219 SS Double Clip at intermediate each 140.00 7.00 980.00
7x10=70.00 Nos. x 2 clips = 140.00 clips

7220 SS Single clip at Top and Bottom each 28.00 4.00 112.00
7x4= 28 Nos. clips
LABOUR
0166 Installation charges for fixing of façade at all heights with sqm 10.80 645.00
extruded hollow clay/terracotta ventillated rain screen
tiles 6966.00
9999 Carriage of materials L.S. 125.00 2.12 265.00
9999 T&P and materials Lead & Lift L.S. 250.00 2.12 530.00
TOTAL 42365.77
Add 1 % Water charges on "W" 423.66
TOTAL 42789.43
Add GST on "X" (multiplying factor 0.1405) 6011.91
TOTAL 48801.34
Add 15% CPOH on "Y" 7320.20
TOTAL 56121.55
Add Cess @ 1% on "Z" 561.22
Cost of 10.80 sqm. 56682.76
Cost of 1 sqm 5248.40
Say 5248.40
26.93 Providing and fixing of façade at all heights with extruded hollow Clay / Terracotta ventilated rainscreen tiles of height 259/ 309/ 409mm and lengthof 1190
26.93.1 approved texture,design and pattern having Flexural Strength/ Modulus of Rupture of ≥ 14 N/m² and maximum water absorption of 10% tested as per ISO 10545-
and ISO 10545-3:1995 respectively in true level fixed to a supporting aluminium framework (Alloy 6063 T5/T6) consisting of vertical 'T' (for intermediates)/ 'L' (
termination)/ Tubular sections (at corners)of size 80x60x2mm/ 40x60x2mm/ 40x40x2mm respectively, spaced at maximum spacing of 1200mm c/c matching to the tile
grid, and horizontal aluminium 'C'-clamps of size 56x34x2 mm thickness of length 150mm at junction of tiles and of length 75mm at wall ends/ corners fixed on to
vertical sections at spacing of 250/ 300/ 400mm c/c matching to the tile horizontal grid with two numbers of self-drilling / self-tapping SS screws of size 5.5x25 m
EPDM washers.
The vertical 'T'/'L/ Tubular' sections shall be fixed to the wall using HDG (hot-dip-galvanized) steel L-brackets (galvanizing thickness of minimum 80 microns) of size 110
intermediate vertical aluminium profiles and of size 220x110x12 mmat outer corners and stainless steel grade 304,M10 full threaded anchor fasteners with nylon sleev
long (for brick work) and M8 expansion anchor fasteners 75mm long for concrete surface, spacing of brackets to be based on a structural/ static calculation. The brack
of length 175mm at junction of two vertical aluminium profiles and of length 100mm at intermediate points of vertical profiles and shall be fixed to the vertical alumin
Tubular profiles using two numbers self-drilling/ self-tapping SS screws of size 5.5x25 mm with EPDM washers.
EPDM gaskets to be fixed in between brackets and vertical profiles. The tiles shall be mounted on the ‘C’ clamps such that the tiles are supported at top and bottom at
The tiles shall be mounted on the C-clamps with EPDM profiles in between such that the tiles are supported at top and bottom at both ends. The vertical joint open gro
between two adjacent tiles shall be 10mm. The tiles and system shall be designed to resist wind load as per IS 875 (Part 3) according to different zones. The tiles sha
installed using the ventilated rain screen principle with provision for natural ventilation of the space between the façade tiles and the structural wall. The work shall b
as per specification, drawing and as per direction of the Engineer-in-Charge.
Note : Scaffolding wherever required to be paid separately.
With 24mm thickness (+/- 10%) terracotta tiles of grey colour

Code Description Unit Quantity Rate Rs. Amount Rs.


Detail of cost for 12.60 sqm (4.2 (0.3+3.6+0.3) x 3.0 metre)
MATERIAL
Façade area = 12.60 sqm + Wastage @ 5% = 0.63 sqm. Total = 13.23
sqm
24mm thick extruded terracotta tiles of grey color of size 309x1190
mm and length 1190mm
Aluminium Tube / T Profile
1). At outer corners tubular section 40x40x2 mm =
2 nos. 3 mtr. long = 6.00 mtr. @ 0.82 kg/mtr. = 4.92 kg 2). At
5764 ends/termination angle 40x60x2 mm = 2 nos. 13.23 2475.00 32744.25
sqm kgs
7306 3 mtr. long = 6.00 mtr. @ 0.53 kg/mtr. = 3.18 kg 3). At intermediate T 12.60 190.00 2394.00
section 80x60x2mm = 2 nos. 3 mtr. long = 6.00 mtr. @ 0.75 kg/mtr. =
4.50 kg
(Total = 4.92+3.18+4.50 = 12.60 kg

7306 Aluminium C Clamps of size 56x34x2.0 mm kgs 5.07 190.00 963.30


(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =
3.3 mtr. @ 0.615 kg/mtr. = 2.03 kg
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.615 kg/mtr.= 3.04 kg
Total=2.03 + 3.04 = 5.07 kg
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long each 236.00 3.00 708.00
(a) Bracket to vertical profile - 30 Nos.x2.00 nos. = 60.00
Nos
b) For fixing of brackets to “C” clamps (22+66=88)x2=176
nos.
Total = 176 Nos + 60 = 236.00 Nos
1007 HDG Mild Steel Brackets (Minimum 80 microns quintal 0.6358 4950.00 3147.21
Galvanizing)
a) Wall bracket - 110 x 80x6mm thick
(i) 100 mm long = 10x0.10= 1.00 Mtr @ 8.65 kg/mtr. =
8.65 kg
(ii) 175mm long = 10x0.175=1.75 mtr. @ 8.65 kg/mtr. =
15.13 kg
Total = 8.65 + 15.13 = 23.85 kg
b) Corner Bracket of size 220 x 110 x 12mm thick
(a) 100mm long - 5 Nos x0.10 = 0.50 mtr. @ 28.90 kg/mtr.
= 14.45 Kg
(b) 175mm long - 5x0.175= 0.875 mtr. @ 28.90 kg/mtr. =
25.28 kg
Total = 14.45 + 25.28 = 39.73 kg
Gross total = 23.85+39.73 = 63.58 kg = 0.6358 quintal
7222 SS Anchor Fasteners (RCC / Brick) – M-8x100 mm each 30.00 70.00 2100.00
6x5 nos. = 30 Nos Bracket
7390 EPDM Gaskets of size 100x80 mm metre 3.00 15.00 45.00
30x0.10=3.00 mtr.
7218 MS Polymer Sealant Adhesive litre 0.175 1200.00 210.00
Area = 12.60 Sqm + 5% = 13.23 Sqm Adhesive required =
175 ml. or 0.175 ltr.
7390 EPDM gasket for tiles mounting on C - clamps metre 8.25 15.00 123.75
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =3.3 mtr.
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr.
Total = 3.3 + 4.95 = 8.25 mtr.
LABOUR
0166 Installation charges for fixing of façade at all heights with sqm 12.60 645.00
extruded hollow clay/terracotta ventillated rain screen
tiles 8127.00
9999 Carriage of materials L.S. 125.00 2.12 265.00
9999 T&P and materials Lead & Lift L.S. 250.00 2.12 530.00
TOTAL 51357.51
Add 1 % Water charges on "W" 513.58
TOTAL 51871.09
Add GST on "X" (multiplying factor 0.1405) 7287.89
TOTAL 59158.97
Add 15% CPOH on "Y" 8873.85
TOTAL 69676.38
Add Cess @ 1% on "Z" 696.76
Cost of 12.60 sqm. 70373.14
Cost of 1 sqm 5585.17
Say 5585.15
26.93.2 With 24mm thickness (+/- 10%) terracotta tiles of other than grey colors
Code Description Unit Quantity Rate Rs. Amount Rs.
Detail of cost for 12.60 sqm (4.2 (0.3+3.6+0.3) x 3.0
metre)
MATERIAL
Façade area = 12.60 sqm + Wastage @ 5% = 0.63 sqm.
Total = 13.23 sqm
5765 24mm thick extruded terracotta tiles of grey color of size sqm 13.23 2260.00 29899.80
309x1190 mm and length 1190mm
7306 Aluminium Tube / T Profile kgs 12.60 190.00 2394.00
1). At outer corners tubular section 40x40x2 mm =
2 nos. 3 mtr. long = 6.00 mtr. @ 0.82 kg/mtr. = 4.92 kg
2). At ends/termination angle 40x60x2 mm = 2 nos.
3 mtr. long = 6.00 mtr. @ 0.53 kg/mtr. = 3.18 kg
3). At intermediate T section 80x60x2mm = 2 nos.
3 mtr. long = 6.00 mtr. @ 0.75 kg/mtr. = 4.50 kg
(Total = 4.92+3.18+4.50 = 12.60 kg)
7306 Aluminium C Clamps of size 56x34x2.0 mm kgs 5.07 190.00 963.30
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =
3.3 mtr. @ 0.615 kg/mtr. = 2.03 kg
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr. @
0.615 kg/mtr.= 3.04 kg
Total=2.03 + 3.04 = 5.07 kg
7221 Self-Drilling/Self-Tapping Screws 5.5x25 mm long each 236.00 3.00 708.00
(a) Bracket to vertical profile - 30 Nos.x2.00 nos. = 60.00
Nos
b) For fixing of brackets to “C” clamps (22+66=88)x2=176
nos.
Total = 176 Nos + 60 = 236.00 Nos
1007 HDG Mild Steel Brackets (Minimum 80 microns quintal 0.6358 4950.00 3147.21
Galvanizing)
a) Wall bracket - 110 x 80x6mm thick
(i) 100 mm long = 10x0.10= 1.00 Mtr @ 8.65 kg/mtr. =
8.65 kg
(ii) 175mm long = 10x0.175=1.75 mtr. @ 8.65 kg/mtr. =
15.13 kg
Total = 8.65 + 15.13 = 23.85 kg
b) Corner Bracket of size 220 x 110 x 12mm thick
(a) 100mm long - 5 Nos x0.10 = 0.50 mtr. @ 28.90 Kg/mtr.
= 14.45 Kg
(b) 175mm long - 5x0.175= 0.875 mtr. @ 28.90 kg/mtr. =
25.28 kg
Total = 14.45 + 25.28 = 39.73 kg
Gross total = 23.85+39.73 = 63.58 kg = 0.6358 quintal
7222 SS Anchor Fasteners (RCC / Brick) – M-8x100 mm each 30.00 70.00 2100.00
6x5 nos. = 30 Nos Bracket
7390 EPDM Gaskets of size 100x80 mm metre 3.00 15.00 45.00
30x0.10=3.00 mtr.
7218 MS Polymer Sealant Adhesive litre 0.175 1200.00 210.00
Area = 12.60 Sqm + 5% = 13.23 Sqm Adhesive required =
175 ml. or 0.175 ltr.
7390 EPDM gasket for tiles mounting on C - clamps metre 8.25 15.00 123.75
(i) 150mm long - 2x11 no. = 22.00 nos. x 0.15 =3.3 mtr.
(ii) 75mm long - 6x11=66.00 nos. x 0.075 = 4.95 mtr.
Total = 3.3 + 4.95 = 8.25 mtr.

LABOUR
0166 Installation charges for fixing of façade at all heights with sqm 12.60 645.00 8127.00
extruded hollow clay/terracotta ventillated rain screen
tiles
9999 Carriage of materials L.S. 125.00 2.12 265.00
9999 T&P and materials Lead & Lift L.S. 250.00 2.12 530.00
TOTAL 48513.06
Add 1 % Water charges on "W" 485.13
TOTAL 48998.19
Add GST on "X" (multiplying factor 0.1405) 6884.25
TOTAL 55882.44
Add 15% CPOH on "Y" 8382.37
TOTAL 64264.80
Add Cess @ 1% on "Z" 642.65
Cost of 12.60 sqm. 66567.45
Cost of 1 sqm 5283.13
Say 5283.15
Amount Rs.

534.70

501.83
483.75
WXY
656.88 Z
26.73
2203.89
22.04
2225.93
312.74
2538.68
380.80
2919.48
29.19
2948.67
294.87
294.85

Amount Rs.

438.38

501.83
483.75
656.88 W X Y Z
26.73
2107.57
21.08
2128.65
299.08
2427.72
364.16
2791.88
27.92
2819.80
281.98
282.00

Amount Rs.

638.67

599.20

W
567.60
706.86
26.73
2539.06 W

25.39 X
YZ
2564.45
360.31
2924.76
438.71
3363.47
33.63
3397.11
339.71
339.70

Amount Rs.

523.62

599.20
567.60
706.86 W X Y Z
26.73
2424.01
24.24
2448.25
343.98
2792.23
418.83
3211.07
32.11
3243.18
324.32
324.30

Amount Rs.

831.76

704.06
657.90
785.40 W X Y Z
26.73
3005.85
WXYZ

30.06
3035.91
426.55
3462.45
519.37
3981.82
39.82
4021.64
402.16
402.15

Amount Rs.

681.92

704.06
657.90
785.40 W X Y Z
26.73
2856.02
28.56
2884.58
405.28
3289.86
493.48
3783.34
37.83
3821.17
382.12
382.10

Amount Rs.

627.15

501.83
483.75
WXYZ
656.88
26.73
2296.34
22.96
2319.31
325.86
2645.17
396.78
3041.94
30.42
3072.36
307.24
307.25
Amount Rs.

530.83

501.83
483.75
656.88
26.73
2200.02
22.00
2222.02
312.19
2534.21
380.13 W X Y
2914.35 Z
29.14
2943.49
294.35
294.35

Amount Rs.

749.09

599.20
567.60 W X Y Z
706.86
26.73
2649.49
26.49
2675.98
375.98
3051.96
457.79
3509.75
35.10
3544.85
354.48
354.50

Amount Rs.

634.04
599.20
567.60
706.86
26.73
2534.44
25.34
2559.78
359.65
2919.43
437.91 W X Y
3357.34 Z
33.57
3390.92
339.09
339.10

Amount Rs.

975.56

704.06
657.90
785.40
26.73
3149.66
31.50
3181.15
446.95
3628.11
WX
544.22 Y
4172.32 Z
41.72
4214.05
421.40
421.40

Amount Rs.

825.73

704.06
657.90
WXYZ
785.40
26.73
2999.82
30.00
3029.82
425.69
3455.51
518.33
3973.84
39.74
4013.58
401.36
401.35

Amount Rs.

631.03

501.83
483.75
656.88
26.73
100.00
2.91
202.23
174.15
17.09
2796.60
27.97
2824.57
396.85
3221.42
483.21
3704.64 W X Y Z
37.05
3741.68
374.17
374.15

Amount Rs.

534.70

501.83
483.75
656.88
26.73
100.00
2.91
202.23
174.15
17.09
2700.28
27.00
2727.28
383.18
3110.46
466.57
3577.03 W X Y Z
35.77
3612.80
361.28
361.30

cement of mix :

Amount Rs.

753.73

599.20
567.60
706.86
26.73
100.00
2.91
202.23
174.15
17.09
3150.50
31.51
3182.01
447.07
3629.08
544.36 W X Y
4173.44 Z
41.73
4215.18
421.52
421.50

Amount Rs.

638.67

599.20
567.60
706.86
26.73
100.00
2.91
202.23
174.15
17.09
3035.45
30.35
3065.80
430.74
3496.54
524.48 W X Y
4021.03 Z
40.21
4061.24
406.12
406.10

Amount Rs.

723.48

501.83
483.75
656.88
26.73
100.00
2.91
202.23
174.15
17.09
2889.05
28.89
2917.94
409.97
3327.91
499.19
3827.10 W X Y Z
38.27
3865.37
386.54
386.55

Amount Rs.

1125.41

704.06
657.90
785.40
26.73
100.00
2.91
202.23
174.15
17.09
3795.88
37.96
3833.84
538.65
4372.50
655.87
5028.37 W X Y Z
50.28
5078.66
507.87
507.85

the rough side of single or half brick

Amount Rs.

864.15

599.20
567.60
706.86
26.73
100.00
2.91
202.23
174.15
17.09
3260.93
32.61
3293.54
462.74
3756.28
563.44 W X Y
4319.72 Z
43.20
4362.92
436.29
436.30
r 1:5 (1 cement : 5
ment : 6 fine sand).

Amount Rs.

575.28

219.19

906.29
832.05
749.70
26.73
3309.24
33.09
3342.34
469.60
3811.93
571.79
4383.72 W X Y Z
43.84
4427.56
442.76
442.75
e sand) and a top layer 6 mm thick

Amount Rs.

575.28

361.74

906.29
832.05
749.70
26.73
3451.79
34.52
3486.31
489.83
3976.14
596.42
4572.56 W X Y Z
45.73
4618.28
461.83
461.85

Amount Rs.

765.97

501.83
483.75
656.88
26.73
2435.17
24.35
2459.52
345.56
2805.08
420.76 W X Y
3225.84 Z
32.26
3258.10
325.81
325.80

Amount Rs.
914.91

599.20
567.60
WXYZ
706.86
26.73
2815.30
28.15
2843.46
399.51
3242.96
486.44
3729.41
37.29
3766.70
376.67
376.65

Amount Rs.

1191.51

704.06
657.90 W X Y
785.40 Z
26.73
3365.61
33.66
3399.26
477.60
3876.86
581.53
4458.39
44.58
4502.97
450.30
450.30

Amount Rs.

315.51

381.99
483.75
656.88
WXYZ

28.39
24.80
1891.33
18.91
1910.24
268.39
2178.63
326.79
2505.42
25.05
2530.48
253.05
253.05
ick coat of Lime wash on top of walls

Amount Rs.

315.51
381.99
483.75

656.88
28.39
24.80
100.00
2.91
202.23
174.15
17.09
3.70
4.41
1.10
49.98
45.15
5.79
2497.84
24.98
2522.82
354.46
2877.27
431.59
3308.86
33.09
3341.95
334.19
334.20
WXY
Z

Amount Rs.

WXYZ
110.00
3.21
202.23
174.15
17.09
506.67
5.07
511.74
71.90 W X Y Z
583.64
87.55
671.19
6.71
677.90
67.79
67.80

ed stone from 6 mm to 10 mm nominal


: 4 coarse sand) and top layer 10 mm

Amount Rs.

627.15
501.83
483.75

WXYZ
656.88
20.95
525.86
456.89
445.05
606.90
20.95
90.00
7.14
26.10
7.72
374.50
322.50
71.40
20.95
196.00
161.25
5623.75
56.24
5679.99
798.04
6478.03
971.70
7449.73
74.50
7524.23
752.42
752.40

WXYZ

ed stone 6 mm to 12.5 mm nominal


oarse sand) and top layer 10 mm

Amount Rs.

W
627.15
501.83
483.75
656.88
20.95
525.86
456.89
445.05
606.90
20.95
90.00
7.14
26.10
7.72
374.50
322.50
71.40
20.95
9.37
5275.87

52.76
5328.63
748.67
6077.30
911.60
6988.90
69.89 X
7058.79 Y Z
705.88
705.90

mended by the manufacturers.

Amount Rs.

WXYZ
51.80
15.16
66.96
0.67 W X Y Z
67.63
9.50
77.13
11.57
88.70
0.89
89.59
60.53
60.55

height of 3 m or part thereof.

Amount Rs.
114.10
149.80
193.50
71.40
15.16
543.96
5.44
WXYZ
549.40
77.19
626.59
93.99
720.57
7.21
727.78
72.78
72.80

Amount Rs.
149.80
129.00
15.16
293.96
2.94
296.90
41.71
338.61
50.79 W
389.40 X Y Z
3.89
393.30
39.33
39.35
Amount Rs.
224.70
193.50
28.39
446.59
4.47
451.05
63.37
514.43
77.16 W X Y
591.59 Z
5.92
597.51
59.75
59.75

el:

Amount Rs.
2247.00
1290.00
645.00
178.50
28.39
4388.89
43.89
4432.78
622.80
5055.58
758.34
5813.92 W X Y
58.14 Z
5872.06
587.21
587.20

Amount Rs.
3745.00
1935.00
1290.00
235.62
28.39
7234.01
72.34
7306.35
1026.54
8332.89
1249.93
WXY
9582.82
Z
95.83
9678.65
967.87
967.85
95.83
9678.65
967.87
967.85

Amount Rs.
561.75
477.30
57.05
1096.10
10.96
1107.06
155.54 WXY
1262.60 Z
189.39
1451.99
14.52
1466.51
146.65
146.65

Amount Rs.
599.20
516.00
72.21
1187.41
11.87
1199.28
168.50 WXYZ
1367.78
205.17
1572.95
15.73
1588.68
158.87
158.85

Amount Rs.
374.50
322.50
28.39
725.39
7.25
732.64
102.94 W X Y Z
835.58
125.34
960.91
9.61
970.52
97.05
97.05
960.91
9.61
970.52
97.05
97.05

he surface even and smooth complete.

Amount Rs.
115.00
8.27
713.44
586.95
178.04
1601.70
16.02
1617.71
227.29
1845.00
276.75
2121.75
21.22
2142.97
214.30
214.30

WXY
Z

Amount Rs.
374.50
322.50
3.86
700.86
7.01
707.87
99.46 W X Y Z
807.32
121.10
928.42
9.28
937.70
93.77
93.75

Amount Rs.
51.98
202.23
174.15
35.70
3.03
467.10
4.67
471.77
66.28
538.05
80.71
618.76
6.19
624.95
6.25
6.25

WXY
Z

Amount Rs.
51.98
224.70
193.50
35.70
4.41
510.29
5.10
515.40
72.41
WXYZ
587.81
88.17
675.98
6.76
682.74
6.83
6.85

Amount Rs.
51.98
262.15
225.75
35.70
5.79
581.37
5.81
587.19
82.50
669.69
100.45
770.14
7.70
777.84
7.78
7.80

WXYZ

Amount Rs.
51.98
486.85
419.25
35.70
3.31
997.09
9.97
1007.06
141.49
1148.56
172.28
1320.84
13.21
1334.05
13.34
13.35

WXYZ

Amount Rs.

WXYZ
74.26
239.68
206.40
42.84
4.41
567.59
5.68
573.27
80.54
653.81 W X Y Z
98.07
751.89
7.52
759.40
7.59
7.60

Amount Rs.
74.26
269.64
232.20
42.84
5.79
624.73
6.25
630.98
88.65
719.63
107.94
827.58
8.28
835.85
8.36
8.35

WXYZ

Amount Rs.

WXY
Z
74.26
314.58
270.90
42.84
9.37
711.95
7.12
719.07
101.03
820.10
123.02
943.12
9.43
952.55
9.53
9.55

WXY
Z

Amount Rs.
89.12
644.14
554.70
35.70
5.79
1329.44
13.29
1342.74
188.65
1531.39
229.71
1761.10
17.61
1778.71 W
17.79 X Y
17.80 Z

r 1:5 (1 cement : 5 coarse sand) top

Amount Rs.
55.93
37.13
644.14
554.70
35.70
5.79
1333.39
13.33
1346.72
189.21
1535.94
230.39
1766.33
17.66
1783.99
17.84
17.85

WXYZ

Amount Rs.
131.46
374.50
387.00
664.02
15.16
30.32
1602.46
16.02
1618.48
227.40
1845.88
276.88
2122.76
21.23
2143.99
214.40
214.40

WXY
Z

Amount Rs.
201.58
801.43
844.95
714.00
15.16
34.17
2611.29
26.11
2637.40
370.56
3007.96
451.19
3459.15
34.59
3493.74
349.37
349.35
WXYZ

Amount Rs.
201.58
15.16
501.83
516.00
913.92
34.17
2182.66
21.83
2204.49
309.73
2514.22
377.13
2891.35
28.91
2920.26
292.03
292.05

WXY
Z

Amount Rs.
100.79
15.16
689.08
883.65
664.02
34.17
2386.87
23.87
2410.74
338.71

WX
338.71

YZ
2749.45
412.42
3161.87
31.62
3193.49
319.35
319.35

Amount Rs.
166.52
15.16
1498.00
1909.20
714.00
34.17
4337.05
43.37
4380.42
615.45
4995.87
749.38
5745.26
57.45
5802.71
580.27
580.25

WXYZ

Amount Rs.
296.03
15.16
1498.00
1909.20
714.00
34.17
4466.56
44.67
4511.23
633.83
5145.05
771.76
5916.81
59.17
5975.98
597.60
597.60

WXY
Z
Amount Rs.

76.94

352.03
445.05
421.26 W X Y Z

34.17
1329.45
13.29
1342.75
188.66
1531.40
229.71
1761.11
17.61
1778.73
177.87
177.85
itional height of 3 m or part there of.

Amount Rs.

28.39
28.39
56.77 W X Y Z
0.57
57.34
8.06
65.40
9.81
75.21
0.75
75.96
7.60
7.60

Amount Rs.

18.00
1.93

142.80
64.50
WXY
Z
WXY
9.37
Z
5.79
242.39
2.42
244.81
34.40
279.21
41.88
321.09
3.21
324.30
32.43
32.45

Amount Rs.

3.70
4.41
1.10

57.12
25.80 W X Y Z
5.79
97.92
0.98
98.90
13.90
112.79
16.92
129.71
1.30
131.01
13.10
13.10

Amount Rs.

18.00
17.09
1.93

214.20
64.50 W X Y Z
9.37
5.79
330.87
3.31
334.18
46.95
381.14
57.17
438.31
4.38
442.69
44.27
44.25

Amount Rs.

18.00
17.09
1.93

214.20 W X Y
64.50
5.79
5.79
327.29
3.27
330.56
46.44
377.01

56.55
433.56 Z
4.34
437.90
43.79
43.80
en shade :

Amount Rs.

35.00
15.16
17.09

60.00
9.37

24.80

714.00
322.50
17.09
1215.01
12.15
1227.16
172.42
1399.57
209.94
1609.51 W X Y Z
16.10
1625.60
162.56
162.55
s/litre, of approved manufacturer, of

Amount Rs.

60.00
9.37
24.53

285.60 W X Y Z
296.70
17.09
693.29
6.93
700.22
98.38
798.60
119.79
918.39
9.18
927.57
92.76
92.75
urface :

Amount Rs.

35.00
15.16

285.60
WXY
129.00 Z
17.09
481.85
4.82
486.66
68.38
555.04
83.26
638.30
6.38
644.68
64.47
64.45

Amount Rs.
145.92
3.31

328.44
148.35
71.40
WXYZ
15.16
17.09
729.66
7.30
736.96
103.54
840.50
126.08
966.58
9.67
976.24
97.62
97.60

r primer applied @ 2.20kg/10 sqm

Amount Rs.

918.40
220.00
3.31

428.40

193.50
35.70
14.88
WXYZ
17.09
1831.28
18.31
1849.59
259.87
2109.46
316.42
2425.88
24.26
2450.13
245.01
245.00

primer applied @ 2.20 kg/10 sqm)

Amount Rs.
334.00
220.00
3.31

428.40
193.50
35.70
15.16
17.09
1247.15
12.47
1259.62
176.98
1436.60
215.49 W X Y
1652.09 Z
16.52
1668.61
166.86
166.85
de:

Amount Rs.

300.30
220.00
3.31

428.40
193.50
35.70
15.16
17.09
1213.45
12.13
1225.59 W X
172.19

YZ
1397.78
209.67
1607.45
16.07
1623.52
162.35
162.35
nufacturers specifications :
r applied @ 0.75 ltr /10 sqm

Amount Rs.
375.00
120.00
3.31

428.40
193.50
35.70 W X Y Z
14.88
17.09
1187.88
11.88
1199.76
168.57
1368.32
205.25
1573.57
15.74
1589.31
158.93
158.95
@ 0.90 ltr/10 sqm over an under coat of

Amount Rs.

270.00
120.00
3.31

428.40
193.50
35.70 W X Y Z
14.88
17.09
1082.88
10.83
1093.71
153.67
1247.37
187.11
1434.48
14.34
1448.82
144.88
144.90
d @ 0.90 ltr/10 sqm over an under coat

Amount Rs.

270.00
84.00
3.31
428.40
193.50
35.70
14.88
17.09
1046.88
10.47
1057.35
148.56
1205.90
180.89 W X Y
1386.79 Z
13.87
1400.66
140.07
140.05
resistance as per IS 15489:2004, Alkali &
con additives.
erior primer applied @ 0.90 litre/10 sqm.

Amount

386.10

90.00
3.31

321.30
WXY
321.30 Z
15.16
17.09
1154.25
11.54
1165.79
163.79
1329.59
199.44
1529.03
15.29
1544.32
154.43
154.45

soft wood)

Amount Rs.
78.75
5.79
0.83

178.50
161.25
11.30
22.87
459.29
4.59
463.88
65.18
529.06
79.36 W X Y
608.42 Z
6.08
614.50
61.45
61.45
wood

Amount Rs.

90.00
5.79
0.83

178.50
161.25 W X Y Z
11.30
22.87
470.54
4.71
475.24
66.77
542.02
81.30
623.32
6.23
629.55
62.96
62.95
vanised iron/ steel works

Amount Rs.

64.80
1.10

171.36
154.80
22.87
414.94 W X Y
4.15 Z
419.09
58.88
477.97
71.70
549.66
5.50
555.16
55.52
55.50

k (second coat)

Amount Rs.

43.20
0.83

85.68
77.40 W X Y Z
15.16
222.26
2.22
224.49
31.54
256.03
38.40
294.43
2.94
297.38
29.74
29.75
facture on wet or patchy portion of

Amount Rs.

216.00
1.10
5.79

192.78
174.15 W X Y
11.30 Z
22.87
623.99
6.24
630.23
88.55
718.78
107.82
826.60
8.27
834.87
83.49
83.50

Amount Rs.

345.60
1.10
5.79

307.02
277.35
18.08
36.59
991.53
W
9.92 X Y Z
1001.45
140.70
1142.15
171.32
1313.48
13.13
1326.61
132.66
132.65
cturer's specifications including

Amount Rs.

90.00
5.79
0.83

178.50
161.25
11.58
22.60

268.75
3.03

385.56
348.30
14.33
17.09
1507.60
15.08
1522.67
213.94
1736.61

WXYZ
260.49
1997.10 W X Y Z
19.97
2017.07
201.71
201.70

Amount Rs.

42.00
28.66
1.10
178.50
161.25
5.79
17.09
260.15
14.33
3.03
385.56
348.30
22.87
14.33
1482.97
14.83
1497.80
210.44
1708.24
256.24
1964.47
19.64
1984.12
198.41
198.40

W
X
Y
Z
red colour to give an

mordant solution
43.20
0.83
85.68
77.40
15.16
132.00
3.03
385.56
348.30
14.33
17.09
1122.57
11.23
1133.80
159.30
1293.10
193.96
1487.06
14.87

1501.94
150.19
150.20

Amount Rs.
11.40
3.86
1.93
428.40
387.00
76.07
76.07
984.72
9.85
994.57
139.74
1134.30
170.15
1304.45
13.04
1317.49
52.70
52.70
WXY
Z

e, copper nitrate and ammonium

Amount Rs.
0.46
3.90
2.73
0.29
3.86
1.93
428.40
387.00
76.07
76.07
980.69
9.81
990.50
139.16
1129.66
169.45
1299.11
12.99
1312.10
52.48
52.50

WXYZ

rosive bitumastic paint of approved

Amount Rs.
64.80
1.10

171.36
154.80
22.87

95.00
3.03

385.56
348.30
11.30
17.09
11.30
129.53
1416.05
14.16
1430.21
200.94
1631.15
244.67 W X Y
1875.82 Z
18.76
1894.58
63.15
63.15

Amount Rs.

96.00

257.04
232.20
33.90
1.93

141.00
4.41

571.20
516.00
17.09
25.36
15.16
199.53
2110.81
21.11
2131.92
299.53
2431.46
WXY
Z
364.72 W X Y
2796.17 Z
27.96
2824.14
94.14
94.15
amel paint of approved brand and

Amount Rs.

64.80
1.10

171.36
154.80
22.87

203.00
3.03
11.30

385.56
348.30
14.33
25.36
140.83
1546.65
W
15.47 X Y Z
1562.11
219.48
1781.59
267.24
2048.83
20.49
2069.32
68.98
69.00

Amount Rs.

96.00
1.38

257.04
232.20
33.90

301.00
4.41
16.81

571.20
516.00
21.22
37.76
214.97
2303.88 W X Y
23.04 Z
2326.92
326.93
2653.86
398.08
3051.93
30.52
3082.45
102.75
102.75

Amount Rs.

130.00
1.10

107.10
96.75
8.82 W X Y Z
8.27
352.04
3.52
355.56
49.96
405.52
60.83
466.34
4.66
471.01
47.10
47.10
er litre per coat including preparation

Amount Rs.

1368.00
3.03

385.56
348.30 W X Y Z
14.33
17.09
2136.31
21.36
2157.67
303.15
2460.83
369.12
2829.95
28.30
2858.25
285.82
285.80
and second coat respectively.

Amount Rs.

3.03
84.00
3.03
25.00

277.35
11.30
11.30
415.01 W

4.15 X
YZ
419.16
58.89
478.05
71.71
549.76
5.50
555.26
55.53
55.55
e:

Amount Rs.

242.00
14.33
3.03
0.00
385.56
348.30 W X Y Z
22.87
14.33
1030.43
10.30
1040.73
146.22
1186.96
178.04
1365.00
13.65
1378.65
137.86
137.85

Amount Rs.

203.00
11.30
3.03

385.56
348.30 W X Y Z
14.33
17.09
982.61
9.83
992.44
139.44
1131.87
169.78
1301.65
13.02
1314.67
131.47
131.45
an even shade :
ed brand and manufacture

Amount Rs.

78.75
5.79
0.83

178.50
161.25
11.30
22.87

203.00
3.03

385.56
348.30
14.33
17.09
1430.60
14.31
1444.90
203.01

WXYZ
1647.91
247.19
1895.10 W X Y Z
18.95
1914.05
191.41
191.40

Amount Rs.

120.00
3.03
11.30

385.56
348.30 W X Y
14.33 Z
25.36
907.88
9.08
916.96
128.83
1045.79
156.87
1202.66
12.03
1214.68
121.47
121.45
en shade :

Amount Rs.

261.00
3.03
11.30

385.56
348.30 W X Y
14.33 Z
17.09
1040.61
10.41
1051.02
147.67
1198.68
179.80
1378.49
13.78
1392.27
139.23
139.25
ven shade :

Amount Rs.

95.00
3.03

385.56
348.30
11.30 W X Y Z
17.09
860.28
8.60
868.88
122.08
990.96
148.64
1139.60
11.40
1151.00
115.10
115.10

Amount Rs.

70.00
5.25
133.40
3.03
11.30

642.60

580.50

14.33 W X Y Z
15.16
1475.57
14.76
1490.33
209.39
1699.72
254.96
1954.67
19.55
1974.22
197.42
197.40
Amount Rs.

70.00
5.25
144.90
3.03
5.79

642.60

580.50

14.33
15.16
1481.56
14.82
1496.37
210.24
1706.61
255.99 W X Y
1962.61 Z
19.63
1982.23
198.22
198.20

Amount Rs.

78.24
15.16
72.00
5.79
34.17
28.39
3.03

2499.00
17.09
2752.87
27.53
2780.39 W X
390.65

YZ

3171.04
475.66
3646.70
36.47
3683.16
368.32
368.30

Amount Rs.

115.00
0.83

571.20
516.00
8.82
15.16
1227.00 W X Y
12.27 Z
1239.27
174.12
1413.39
212.01
1625.40
16.25
1641.65
164.17
164.15

Amount Rs.

23.00

285.60
258.00
11.30 W X Y Z
17.09
594.99
5.95
600.94
84.43
685.37
102.81
788.17
7.88
796.06
79.61
79.60

Amount Rs.

50.40
1.93
4284.00
1290.00
28.39
17.09 W X Y Z
5671.80
56.72
5728.52
804.86
6533.38
980.01
7513.39
75.13
7588.52
5.06
5.05
under layer 12 mm cement plaster 1:4
layer @ 2 Kg of cement per square
e), in panels with groove all around as
e chippings ,complete as per

Amount Rs.

627.15

501.83
483.75
656.88
19.02

100.00
2.91
161.25

168.00

22.95
60.00
6.56
500.00
14.57
64.50
35.70
9.09
4.41
1372.00
1128.75
214.20
51.81

784.00
322.50
53.47

7365.30 W X Y
73.65 Z
7438.96
1045.17
8484.13
1272.62
9756.75
97.57
9854.32
985.43
985.45
n using wooden battens, nailed to the
ete as per specifications and direction

Amount Rs.

38.48
0.83

107.10
96.75
6.06

548.80
451.50
152.13
1401.65
14.02
1415.67
198.90
1614.57
242.19
1856.75 W X Y Z
18.57
1875.32
62.51
62.50

Amount Rs.

51.48
1.10

107.10
96.75
6.06

548.80
451.50
152.13
1414.93
14.15
1429.08
200.79
1629.86
244.48
1874.34 W X Y Z
18.74
1893.08
63.10
63.10
additional height of 3 m or part

Amount Rs.

456.39
235.20
193.50
107.10 W X Y
60.63 Z
1052.83
10.53
1063.35
149.40
1212.76
181.91
1394.67
13.95
1408.62
140.86
140.85

Amount Rs.

392.00
322.50
114.10 W X Y
828.60 Z
8.29
836.88
117.58
954.47
143.17
1097.64
10.98
1108.61
110.86
110.85
ne grit plastered surface as per
than 2 mm), nailed to the under layer

Amount Rs.

1322.40
82.64

328.44
96.75
6.06
152.13
1988.42
19.88
2008.31
282.17
2290.47
343.57
2634.04 W X Y Z
26.34
2660.38
88.68
88.70
ne grit plaster.

Amount Rs.

WXYZ
1120.00

-500.00 W X Y Z
620.00
6.20
626.20
87.98
714.18
107.13
821.31
8.21
829.52
82.95
82.95
laster having additives and light weight
even background such as bare brick/

Amount Rs.

1016.82
898.80
774.00
26.73
2716.35
27.16
2743.52
385.46
3128.98
469.35
3598.33
35.98
3634.31
363.43
363.45

WXYZ

crons and specific gravity of 1.34 to


n cement mortar as per directions of

Amount Rs.

WXY
Z
51.25
51.25
0.51 W X Y
51.76 Z
7.27
59.04
8.86
67.89
0.68
68.57
68.55

nd manufacturer, over the plastered

Amount Rs.
189.54
8.27
352.80
290.25
84.80
925.66
9.26
934.91
131.36
1066.27
159.94 W X Y Z
1226.21

12.26
1238.47
123.85
123.85

less than 50 grams/ litre, of approved

Amount Rs.
24.80
1.10
22.87
235.62
109.65
15.16
409.21
4.09
413.30
58.07
471.37
70.70
542.07
5.42 W X Y
547.49 Z
54.75
54.75

Amount Rs.
39.60
24.53
9.37
285.60
296.70
17.09
672.89
6.73
679.61
95.49
775.10
116.27
891.37
8.91 W X Y
900.28 Z
90.03
90.05

han 50 grams/ litre, of approved brand

Amount Rs.

49.82
1.10
11.30
257.04
232.20
17.09
14.33
582.88
5.83
588.71
82.71
671.42
100.71
772.14 W X Y Z
7.72
779.86
77.99
78.00

Amount Rs.

78.96
3.03
14.33

385.56
WXY
348.30 Z
22.87
14.33
867.39
8.67
876.06
123.09
999.15
149.87
1149.02
11.49
1160.51
116.05
116.05
Compound ) content less than 50 grams/
shade and colour.

Amount Rs.

76.00
1.10
1.93

257.04
232.20
17.09
14.33
599.69 W
6.00

XY
605.69 Z
85.10
690.79
103.62
794.40
7.94
802.35
80.23
80.25

Amount Rs.

120.00
3.03
14.33

385.56
348.30 W X Y Z
22.87
14.33
908.43
9.08
917.51
128.91
1046.42
156.96
1203.39
12.03
1215.42
121.54
121.55
Organic Compound ) content.
than 50 grams/ litre

Amount Rs.

78.75
5.79
0.83

178.50 W X Y Z
161.25
11.30
22.87
459.29
WXYZ

4.59
463.88
65.18
529.06
79.36
608.42
6.08
614.50
61.45
61.45

Amount Rs.

35.00
17.09
285.60

129.00 W X Y Z
15.16
481.85
4.82
486.66
68.38
555.04
83.26
638.30
6.38
644.68
64.47
64.45

ymer modified self curing mortar of

Amount Rs.

690.00

16.54

381.99
483.75

28.39
24.80
1625.47
16.25
1641.72
230.66
1872.38
280.86 W X Y
2153.24 Z
21.53
2174.77
217.48
217.50

Amount Rs.

12.00
1.10

78.54
38.70
5.79
5.79
141.92 W X Y
1.42 Z
143.34
20.14
163.48
24.52
188.00
1.88
189.88
18.99
19.00

Amount Rs.

6.00
1.10

49.98
19.35
4.41
5.79
86.63 W X Y
0.87 Z
87.50
12.29
99.79
14.97
114.76
1.15
115.91
11.59
11.60
h including necessary repairs to

Amount Rs.

58.05
25.80
28.56
5.79 W X Y
WXY
3.86
122.06
1.22
123.28
17.32
140.60
21.09

161.69 Z
1.62
163.30
16.33
16.35
e of approved brand and manufacture to give

Amount Rs.

40.00
1.10
22.87

235.62 W X Y
109.65 Z
15.16
424.41
4.24
428.65
60.23
488.87
73.33
562.21
5.62
567.83
56.78
56.80
papering and preparing the surface

Amount Rs.

70.95
32.25
35.70
13.23
WXYZ
3.86
155.99
1.56
WXYZ

157.55
22.14
179.68
26.95
206.63
2.07
208.70
20.87
20.85

Amount Rs.

55.20
1.10

257.04
232.20
14.33
17.09
576.96 W X Y
5.77 Z
582.73
81.87
664.60
99.69
764.29
7.64
771.94
77.19
77.20
rrosive bitumastic paint of approved
work :

Amount Rs.

49.20
0.83

128.52
116.10
17.36

73.00
2.20

292.74
264.45
8.82
13.23
9.37
85.44
1061.26 W X Y
10.61 Z
WXY
Z
1071.87
150.60
1222.47
183.37
1405.84
14.06
1419.90
47.33
47.35

Amount Rs.

43.00
0.83

192.78
174.15
8.82
13.23
9.37
57.05
499.22 W X Y
4.99 Z
504.22
70.84
575.06
86.26
661.32
6.61
667.93
22.26
22.25

Amount Rs.

57.00
1.10

257.04
232.20
11.30
17.09
11.30
72.21
659.24 W X Y
6.59 Z
665.83
93.55
759.38
113.91
873.28
8.73
882.02
29.40
29.40

Amount Rs.

85.00
1.38

378.42
341.85
17.09
25.36
15.14
85.44
949.66
WXY
9.50 Z
959.16
134.76
1093.92
164.09
1258.01
12.58
1270.59
42.35
42.35

aint of approved brand and

Amount Rs.

49.20
0.83

128.52
116.10
17.36

91.50
2.20
8.82

292.74
264.45
11.02
19.29
95.08
1097.12
10.97
1108.09
155.69

WXYZ
1263.78
189.57
1453.35 W X Y Z
14.53
1467.88
48.93
48.95

Amount Rs.

64.80
1.10

171.36

154.80
22.87

174.00

3.03
11.30

385.56

348.30
14.33
25.36
140.83
1517.65
15.18
1532.82
215.36
1748.18
262.23
2010.41 W X Y Z
20.10
2030.52
67.68
67.70

Amount Rs.

96.00
1.38

257.04

232.20
33.90

258.00

4.41
16.81

571.20

516.00
21.22
37.76
214.97
2260.88
22.61
2283.49
320.83
2604.32
390.65
2994.97 W X Y Z
29.95
3024.92
100.83
100.85
amel paint of approved brand and

Amount Rs.

52.50
0.83
4.41

199.92
180.60
8.82
13.23
9.37
57.05
526.72
5.27
531.99
74.74
606.74
91.01
697.75 W X Y Z
6.98
704.72
23.49
23.50
Amount Rs.

69.00
1.10
5.79

257.04
232.20

11.30
17.09
11.30
WXYZ
72.21
677.02
6.77
683.79
96.07
779.87
116.98
896.85
8.97
905.82
30.19
30.20

Amount Rs.

102.00
1.38
8.27

378.42
341.85
16.81
25.36
15.16
85.44
974.68
9.75
984.42
138.31
1122.74
168.41 W X Y
1291.15 Z
12.91
1304.06
43.47
43.45
Amount Rs.

105.30
1.10

78.54
70.95
5.79 W X Y Z
5.79
267.47
2.67
270.14
37.95
308.10
46.21
354.31
3.54
357.85
35.79
35.80

Amount Rs.

146.00
1.10
11.30

257.04
WXY
232.20 Z
17.09
14.33
679.06
6.79
685.85
96.36
782.21
117.33
899.55
9.00
908.54
90.85
90.85
an even shade :

Amount Rs.

122.50
1.10

257.04
232.20
5.79
11.30
17.09
647.02 W X Y
6.47 Z
653.49
91.81
745.30
111.80
857.10
8.57
865.67
86.57
86.55

Amount Rs.

69.00
1.10
5.79

257.04
232.20
11.30
WXYZ
17.09
593.52
5.94
599.45
84.22
683.67
102.55
786.23
7.86
794.09
79.41
79.40
en shade :

Amount Rs.

157.50
1.10
5.79

257.04
232.20 W X Y
11.30 Z
17.09
WXY
Z

682.02
6.82
688.84
96.78
785.62
117.84
903.46
9.03
912.50
91.25
91.25
ven shade :

Amount Rs.

57.00
1.10

257.04
232.20
11.30
17.09
575.73 W X Y
5.76 Z
581.49
81.70
663.19
99.48
762.66
7.63
770.29
77.03
77.05

Amount Rs.

47.04
39.00
1.93

22.87
1.10

1256.64
17.09
1385.67 W X Y
13.86 Z
1399.53
196.63
1596.16
239.42
1835.59
18.36
1853.94
185.39
185.40

Amount Rs.

57.50
0.83

285.60
258.00
8.82
9.37
620.12
WXY
6.20 Z
626.32
88.00
714.32
107.15
821.46
8.21
829.68
82.97
82.95

Amount Rs.

33.30
1.10

2856.00
645.00
15.16
17.09
3567.65 W

35.68 X
3603.32 Y Z
506.27
4109.59
616.44
4726.03
47.26
4773.29
3.18
3.20
even shade.

Amount Rs.
63.00
1.10
5.79

257.04
232.20 W X Y Z
11.30
17.09
587.52
5.88
593.39
83.37
676.76
101.51
778.28
7.78
786.06
78.61
78.60

WXYZ
Amount Rs.

40.00
17.09
57.09
0.57
57.66
8.10
65.76
9.86
75.62
0.76
76.38
76.40

WXY
Amount Rs.

40.00
17.09
57.09
0.57
57.66
8.10
65.76

9.86
75.62 Z
0.76
76.38
76.40
f approved manufacturer and of required

Amount Rs.

40.00
1.10
22.81

157.08 W X Y Z
141.90
15.16
378.05
3.78
381.83
53.65
435.48
65.32
500.80
5.01
505.81
50.58
50.60

Amount Rs.

83.60
72.00
3.31

328.44
148.35
35.70
15.16
17.09
703.64
7.04
710.68
99.85
810.53
121.58 W X Y
932.11 Z
9.32
941.43
94.14
94.15

Amount Rs.
83.60
2.33

249.90
77.40
35.70 W X Y Z
6.68
17.09
472.70
4.73
477.42
67.08
544.50
81.68
626.18
6.26
632.44
63.24
63.25

Amount Rs.

918.40
3.31

328.44
148.35 W X Y
15.16 Z
17.09
1430.74
14.31
1445.05
203.03
1648.08
247.21
1895.29
18.95
1914.24
191.42
191.40

Amount Rs.

509.60
1.10

235.62
109.65
15.16 W X Y Z
WXYZ
17.09
888.22
8.88
897.10
126.04
1023.14
153.47
1176.61
11.77
1188.38
118.84
118.85

Amount Rs.

334.00
1.93

328.44
148.35
10.20
11.30
834.22
8.34
842.56
118.38
960.94
144.14 W X Y
1105.08 Z
11.05
1116.13
111.61
111.60

Amount Rs.

180.00
1.10

235.62
109.65
15.16 W X Y Z
17.09
558.62
5.59
564.20
79.27
643.47
96.52
740.00
7.40
747.40
74.74
74.75

de

Amount Rs.

300.30
2.20

328.44
148.35
15.16
17.09
811.54
8.12
819.66
115.16
934.82
140.22 W X Y
1075.04 Z
10.75
1085.79
108.58
108.60

Amount Rs.

174.30
1.93

235.62
109.65
15.16 W X Y Z
17.09
553.74
5.54
559.28
78.58
637.86
95.68
733.54
7.34
740.88
74.09
74.10

Amount Rs.

80.50
1.10
5.79

257.04
232.20 W X Y
11.30 Z
5.79
593.72
5.94
599.65
84.25
683.91
102.59
786.49
7.86
794.36
79.44
79.45

Amount Rs.

86.25
1.10
5.79

257.04
232.20
WXYZ
5.79
8.82
596.99
5.97
602.96
84.72
687.67
103.15
790.82
7.91
798.73
79.87
79.85

Amount Rs.

195.00

195.00
9.37

249.90

WX
225.75
9.37
884.39
8.84
893.23 W X
125.50

YZ
1018.73
152.81
1171.54
11.72
1183.26
118.33
118.35

k.

Amount Rs.

70.00
5.79
3.86
51.26

WXYZ
257.04
232.20
620.15
6.20
626.35
88.00
714.35
107.15
821.50
8.22
829.72
82.97
82.95
shade texture with following process in

lowed to dry for 8 to 12 hrs.


aler layer and make the surface further
big holes/grooves etc. Filler coat to be
12 hrs.
ner in required proportion. This 1st
o dry for 12 hrs. The final melamine
in required proportion complete as per

Amount Rs.

468.00
532.00
342.00
360.00
352.00
180.00
50.00

1301.44
2320.50
1290.00

312.50
636.00
500.00
8644.44
86.44
8730.88
1226.69
9957.57
1493.64
11451.21 W X Y Z
114.51
11565.72
1156.57
1156.55
G
G

uding cutting the patch in proper


al of rubbish to the dumping ground,

Amount Rs.

679.52

906.29
832.05
348.30 W X Y Z
656.88
32.25
3455.28
34.55
3489.83
490.32
3980.16
597.02
4577.18
45.77
4622.95
462.30
462.30
Amount Rs.

797.00

906.29
832.05
348.30
656.88
32.25
3572.77
35.73
3608.49
506.99
4115.49
617.32 W X Y
4732.81 Z
47.33
4780.14
478.01
478.00
masonry for holdfasts, embedding
rse sand : 6 graded stone aggregate
g good the damages to walls and
ection of Engineer-in-Charge.

Amount Rs.

29.40

9.72

4.62
21.15
2.31
33.00
0.96
17.42
12.58
6.59
1.41
1.29
0.86
3.03
1.65
0.83

30.44
51.26
28.66
3.86
374.50
483.75
5.79
1125.07
11.25

WXYZ
1136.32
159.65
1295.98
194.40
1490.37 W X Y Z
14.90
1505.28
1505.30

Amount Rs.

19.60

6.48

3.08
14.10
1.54
22.00
0.64
11.61
8.39

4.39
0.94
0.86
0.57
1.93
1.10
0.55

18.27
20.95
1.93
247.17
322.50
708.59
7.09
715.68
100.55
816.23
122.43
938.66 W X Y Z
9.39
948.05
948.05

Amount Rs.

9.80
3.24

1.54
7.05
0.77
11.00
0.32
5.81
4.19
2.20
0.47
0.43
0.29
1.10
0.55
0.28

9.13
17.09
1.93
127.33
322.50
5.79
532.80
5.33
538.12
75.61
613.73
92.06
705.79 W X Y Z
7.06
712.85
712.85
of appropriate size (3 nos on each

Amount Rs.

17.42
12.58
6.59
0.86
3.86
75.00 W X Y
Z
25.91
142.20
1.42
143.62
20.18
163.80
24.57
188.37
1.88
190.25
190.25
and making good the damages to
t municipal dumping ground, all

Amount Rs.

30.44
52.09
357.00
774.00
258.00 W X Y Z
7.42
1478.95
14.79
1493.74
209.87
1703.61
255.54
1959.15
19.59
1978.74
1046.95
1046.95
utty:

Amount Rs.

339.90

3.86
19.04
11.30
14.33
164.22
148.35
3.03
704.03
7.04
711.07
99.91
810.98
121.65
932.62
9.33
941.95
941.95

WXYZ
Amount Rs.
566.50
3.86
19.04
11.30
14.33
164.22
148.35
3.03
930.63
9.31
939.94
132.06
1072.00
160.80
1232.80
12.33
1245.13
1245.15

WXY
Z

Amount Rs.
339.90
19.40
12.50
7.50
9.37
5.79
142.80
178.50
290.25
3.86
1009.87
10.10

1019.97 X Y Z
143.31
1163.27
174.49
1337.76
13.38
1351.14
1351.15
Amount Rs.
566.50
19.40
12.50
7.50
9.37
5.79
142.80
178.50
290.25
3.86
1236.47
12.36
1248.83
175.46
1424.29
213.64
1637.94
16.38
1654.31
1654.30

WXYZ

Amount Rs.
339.90
5.79
20.95
11.30
214.20
193.50
3.03
788.66
7.89
796.55
111.92
908.47
136.27
1044.74
10.45
1055.18
1055.20

WXY
Z

Amount Rs.
566.50

5.79
20.95
11.30
214.20
193.50
3.03
1015.26
10.15
1025.42
144.07
1169.49
175.42
1344.91 W X Y Z
13.45
1358.36
1358.35

Amount Rs.

90.97

57.05

178.50 W X Y Z
161.25
5.79
493.55
4.94
498.49
70.04
568.52
85.28
653.80
6.54
660.34
66.03
66.05

Amount Rs.

41.06

57.05

178.50
161.25

WX
5.79
443.64
4.44
448.08 W X

YZ
62.95
511.03
76.65
587.69
5.88
593.57
59.36
59.35

Amount Rs.

19.04
15.16
5.79

214.20
193.50 W X Y Z
3.03
450.72
4.51
455.22
63.96
519.18
77.88
597.06
5.97
603.03
46.39
46.40

Amount Rs.

19.04
5.79
15.16

214.20
193.50
WXYZ
3.03
450.72
4.51
455.22
63.96
519.18
77.88
597.06
5.97
603.03
603.03
603.05
Amount Rs.

214.20
193.50 W X
3.03
8.27
419.00
4.19
423.19

YZ
59.46
482.65
72.40
555.04
5.55
560.60
560.60
including cutting chase, anchoring
plastering and painting the exposed

Amount Rs.

30.02

28.66

15.16

23.52
85.68
161.25
5.79
350.08
3.50
353.58
49.68
403.26
60.49 W X Y
463.75 Z
4.64
468.38
468.40
tiles or bricks, removing mud
or bricks, grouted in cement mortar
of unserviceable material to the
Charge.

Amount Rs.

404.46
348.30
202.23
197.56
42.00

98.78

161.25

267.31

898.80
967.50
714.00
11.30
5.79
4319.27
43.19
4362.47
612.93
4975.39
746.31
5721.70 W X Y Z
57.22
5778.92
577.89
577.90
uding necessary repairs and cement
r direction of Engineer-in-Charge.

Amount Rs.
570.83
241.88
8.54
85.71

2860.00

205.47

45.73

32.87
1265.81
1449.42
1090.05
242.76
34.17
81.97
8215.20
82.15
8297.35
1165.78
9463.12
1419.47
10882.59 W X Y Z
108.83
10991.42
1099.14
1099.15
il type wood preservative of
plete as per direction of Engineer-in-

Amount Rs.

18360.00
57.33

357.00
1290.00
11.30
171.15
158.60
130.66
118.04
1.65
10.75
10.20
20676.67
206.77

WXYZ
20883.44
2934.12
23817.56
3572.63
27390.20 W X Y Z
273.90
27664.10
92213.67
92213.65
il type wood preservative of approved
er direction of Engineer-in-Charge.

Amount Rs.

187.50
0.59
178.50
161.25
97.37
357.00
212.85
18360.00
57.33
714.00
357.00
645.00
59.15
49.98
45.15
0.28
3.86
3.86
43.82
57.05
100.00
21691.53
216.92
21908.44
3078.14
24986.58
3747.99
28734.56
287.35
29021.91
96739.70
96739.70

WXYZ

Amount Rs.
111.56
0.59
178.50
161.25
97.37
357.00
212.85
10924.20

57.33
714.00
357.00
645.00
59.15
49.98
45.15
0.28
3.86
3.86
43.82
57.05
100.00
14179.79
141.80
14321.59
2012.18
16333.77
2450.07
18783.84
187.84
18971.67
63238.90
63238.90
WXY
Z
Amount Rs.

225.00
0.70
178.50
161.25
187.25
449.82
322.50
22980.00
71.76
714.00
714.00
1290.00
73.45
57.12

51.60
0.55
4.96
4.69
43.82
70.28
150.00
27751.24
277.51
28028.76
3938.04
31966.80
4795.02
36761.82
367.62
37129.43
99011.81
99011.80 W X Y Z
Amount Rs.

133.88
7.03
178.50
161.25
187.25
449.82
322.50
13673.10
71.76
714.00
714.00
1290.00
73.45
57.12
51.60
0.55
4.96
4.69
43.82
70.28
150.00
18359.54
183.60
18543.14

WX

2605.31
21148.45
3172.27
24320.71
243.21 YZ
24563.92
65503.79
65503.80

ing, including disposal of rubbish to


Amount Rs.
341.85
51.60
49.98
3.03
446.46
4.46
450.93
63.36 W X Y Z
514.28
77.14
591.42
5.91
597.34
59.73
59.75

roofing compound by weight of

Amount Rs.

65.73
5.36
232.20
257.04
257.04
39.96
857.33
8.57
865.90
121.66
987.56
148.13
1135.70
11.36
1147.05
114.71 W X Y
114.70 Z

Amount Rs.

74.50
6.06

232.20
257.04
257.04
39.96
866.79
8.67
875.46
123.00
998.46
149.77
1148.23 W X Y Z
11.48
1159.72
115.97
115.95
als to any distance within compound

Amount Rs.

64.26
42.84
103.20
210.30
2.10
212.40
29.84
242.25
36.34 W X Y
278.58 Z
2.79
281.37
4.47
4.45
itumastic paint of approved brand &
and.

Amount Rs.

816.00

20.40
23.80
2.48

266.56
219.30
29.49
103.23 A
AW
XYZ
214.09
1695.35
13.78
1709.13
195.55
1904.68
238.10
2142.78
18.25
2161.03
106.98
107.00
and applying priming coat of zinc

Amount Rs.

643.50
1.89

414.55

A
A
A
WXYZ
265.30

30.44
51.26
3.86

29.42

374.50
483.75
5.51
2303.99
15.95
2319.94
226.30
2546.23
275.54
2821.78
21.13
2842.90
246.14
246.15
me with necessary clamps, nuts and

Amount Rs.

7.14
7.14
12.90
0.83

620.00

169.75

31.20
160.00

23.52
14.28
70.95

9.16
3.58
1130.45
11.21
1141.66
159.12
1300.78
193.74
1494.52 A W X Y Z
14.85
1509.37
150.94
150.95

Amount Rs.

28.56
21.42
38.70
2.20

620.00

485.00

83.20
240.00

78.40
35.70
232.20

18.87
11.30
1895.55
18.77
1914.32
266.31
2180.63
324.26 A W X Y
2504.90 Z
24.86
2529.76
252.98
253.00
the like.

Amount Rs.

262.50
1290.00
1552.50
15.53 W X Y Z
1568.03
220.31
1788.33
268.25
2056.58
20.57
2077.15
190.39
190.40

Amount Rs.
178.20
406.35
224.91
13.67
823.13
823.13
823.15

Amount Rs.

WXYZ
2267.46
205.79
215.95
5.79
282.24
257.04
883.65
142.80
4260.72
42.61
4303.32
604.62
4907.94
736.19
5644.13
56.44
5700.57
5700.55

WXYZ

ary screws.

Amount Rs.
4290.00
7.49
305.91
156.00
48.00
1881.60
128.52
496.65
85.71
7399.89
74.00
7473.88
1050.08
8523.97
1278.59
9802.56
98.03
9900.59
4583.60
4583.60

WXYZ

ews.

Amount Rs.
3315.00
7.49
305.91
156.00
48.00
1881.60
128.52
496.65
85.71
6424.89
64.25
6489.13
911.72
7400.86
1110.13
8510.99
85.11
8596.10
3979.67
3979.65

WXYZ

ary screws.

Amount Rs.
4620.00
392.43
156.00
48.00

9.80
2.80
7.87
1370.67
164.22
496.65
85.71
7354.15
73.54
7427.69
1043.59
8471.28
1270.69
9741.97
97.42
9839.39
4555.28
4555.30
WXYZ

ews.

Amount Rs.
3570.00
392.43
156.00
48.00
9.80
2.80
7.87
1370.67
164.22
496.65
85.71
6304.15
63.04
6367.19
894.59
7261.78
1089.27

WXY

8351.05 Z
83.51
8434.56
3904.89
3904.90

ed M.S. butt hinges with necessary


ding complete with :

Amount Rs.
1423.80
3.37
3959.52
48.00
9.80
28.80
2.80
214.20
5690.29
17.31
5707.60
245.61
5953.21
299.05
6252.26
22.93
6275.19 A
4155.75 WXYZ
4155.75

d with brass screws and wooden

Amount Rs.
280.00
90.00
5.79
3.31
71.00
5.79

3.31
459.19 W X Y
3.88 Z
463.07
55.09
518.16
67.07
585.23
5.14
590.37
295.19
295.20
55.09
518.16
67.07
585.23
5.14
590.37
295.19
295.20

Amount Rs.
380.00
90.00
5.79
3.31
71.00
5.79
3.31
559.19
4.88
564.07 A
69.28 W X Y Z
633.35
84.35
717.70
6.47
724.17
362.08
362.10

mes of windows and clerestory

Amount Rs.
1458.25
305.55
5.39
57.05
249.90
142.80
290.25
2509.19

W
25.09 X Y Z
2534.28
356.07
2890.35
433.55
3323.90
33.24
3357.14
99.71
99.70

n unexposed surface etc. complete

Amount Rs.
18360.00
57.33
499.80
935.25
499.80
37.68
57.05
20446.91
204.09
20651.00
2896.17
23547.17
3526.42
27073.60
270.36
27343.96
91146.53
91146.55

AWXY
Z

Amount Rs.
10924.20
57.33
499.80
935.25
499.80
37.68
57.05
13011.11
129.73
13140.84
1840.99
14981.84

AWXY

2241.62
17223.46
171.86 Z
17395.32
57984.40
57984.40

ews etc. complete :

Amount Rs.
4250.00
176.00
7.72
313.60
129.00
4876.32
48.76
4925.08
691.97 WXYZ
5617.05
842.56
6459.61
64.60
6524.21
652.42
652.40

Amount Rs.

WXYZ
2850.00
176.00
7.72
313.60
129.00
3476.32
34.76
3511.08
493.31 WXYZ
4004.39
600.66
4605.04
46.05
4651.10
465.11
465.10

Amount Rs.
2500.00
136.00
7.72
313.60
129.00
3086.32

30.86 X Y Z
3117.18
437.96
3555.14
533.27
4088.42
40.88
4129.30
412.93
412.95
ews etc. complete :

Amount Rs.

4800.00
176.00
7.72

313.60 W X Y Z
129.00
5426.32
WXYZ

54.26
5480.58
770.02
6250.60
937.59
7188.19
71.88
7260.07
726.01
726.00

Amount Rs.

4000.00
176.00
7.72

313.60 W X Y Z
129.00
4626.32
46.26
4672.58
656.50
5329.08
799.36
6128.44
61.28
6189.72
618.97
618.95

Amount Rs.

3900.00
136.00
7.72

313.60
129.00 W X Y Z
4486.32
44.86
4531.18
636.63
5167.81
775.17
5942.98
59.43
6002.41
600.24
600.25
e

Amount Rs.

1500.00
60.00
7.72

156.80 W X Y Z
1724.52
17.25
1741.76
244.72
1986.48
297.97
2284.45
22.84
2307.30
230.73
230.75

Amount Rs.

1300.00
60.00
5.79
WXY
133.28 Z
1499.07
14.99
1514.06
212.73
1726.78
259.02
1985.80
19.86
2005.66
200.57
200.55

Amount Rs.

900.00

60.00
5.79

WXYZ
133.28
WXYZ
1099.07
10.99
1110.06
155.96
1266.02
189.90
1455.92
14.56
1470.48
147.05
147.05
ssary brass screws etc. to suit

Amount Rs.

1600.00
68.00
5.79

54.88
WXYZ
13.50
1742.17
17.42
1759.59
247.22
2006.82
301.02
2307.84
23.08
2330.92
233.09
233.10

Amount Rs.

600.00
1.93

47.04 W X Y
648.97 Z
6.49
655.46
92.09
747.55
112.13
859.68
8.60
868.28
86.83
86.85

Amount Rs.
574.00
1.93
WXYZ
47.04
622.97
6.23
629.20
88.40
717.60
107.64
825.24
8.25
833.49
83.35
83.35

Amount Rs.

510.00
1.93

47.04
WXYZ
558.97
5.59
564.56
79.32
643.88
96.58
740.46
7.40
747.87
74.79
74.80

Amount Rs.

400.00
1.93

47.04 W X Y Z
448.97
4.49
453.46
63.71
517.17
77.58
594.75
5.95
600.69
60.07
60.05

Amount Rs.

345.00
1.93

47.04
393.97 W X Y
Z
3.94
397.91
55.91
453.82
68.07
521.89
5.22
527.11
52.71
52.70
plete.

Amount Rs.

168.00
68.00
1.93

62.72 W X Y Z
300.65
3.01
303.66
42.66
346.32
51.95
398.27
3.98
402.25
40.22
40.20
ecessary brass screws etc. complete.

Amount Rs.

360.00
40.00
1.93
WXY
78.40 Z
WXY
Z
480.33
4.80
485.13
68.16
553.29
82.99
636.29
6.36
642.65
64.27
64.25

ews etc. complete.

Amount Rs.

1100.00
40.00
1.93
WXYZ
78.40
1220.33
12.20
1232.53
173.17
1405.70
210.86
1616.56
16.17
1632.72
163.27
163.25

Amount Rs.

2900.00
88.00
20.00
8.14

313.60 W X Y Z
129.00
3458.74
34.59
3493.33
490.81
3984.14
597.62
4581.76
45.82
4627.58
462.76
462.75
screws etc. complete.

Amount Rs.

805.00
300.00
7.72

109.76 W X Y Z
64.50
1286.98
12.87
1299.85
182.63
1482.48
222.37
1704.85
17.05
1721.89
172.19
172.20

Amount Rs.

690.00
232.00
7.72

109.76
64.50
1103.98
11.04
1115.02
156.66
1271.68
190.75 W X Y
1462.43 Z
14.62
1477.05
147.71
147.70

Amount Rs.

WXYZ
905.00
144.00
3.86

WXYZ
109.76
64.50
1227.12
12.27
1239.39
174.13
1413.52
212.03
1625.55
16.26
1641.81
164.18
164.20

Amount Rs.

421.00
144.00
3.86

109.76 W X Y Z
64.50
743.12
7.43
750.55
105.45
856.00
128.40
984.40
9.84
994.25
99.42
99.40

Amount Rs.

180.00
64.00
1.93
WXY
62.72 Z
308.65
3.09
311.74
43.80
355.53
53.33
408.86
4.09
412.95
41.30
41.30

plated brass screws, nuts, bolts and

Amount Rs.

1720.00
13.50
WXYZ
178.50
1912.00
19.12
1931.12
271.32
2202.45
330.37
2532.81
25.33
2558.14
255.81
255.80
story height made with 40 mm dia
s, M.S. tube challies, M.S. clamps and
ition for the required duration as
nnection with the building etc
men etc. complete as per directions
t purpose .The payment will be made

xisting item to be done.

Amount Rs.

7911.85
882.19

12152.00
19995.00
2194.20
43135.24
431.35
43566.59

WXYZ
6121.11
49687.70
7453.15
57140.85 W X Y Z
571.41
57712.26
285.00
285.00

Amount Rs.

2030.00
225925.20

4959.20
1965.60
5520.00
68850.00
63072.00
372322.00
37232.20
-93080.5
316473.70
7911.84
7911.85

PQR

ventilators with necessary welding

Amount Rs.

WXYZ
450.00
266.23
7.72
723.95
7.24
731.19
102.73 W X Y Z
833.92
125.09
959.01
9.59
968.60
484.30
484.30

You might also like