Scribd
Upload
484 views2 pages

Btech Ec 5 Sem Digital Signal Processing Kec503 2023

This document appears to be an exam for a Digital Signal Processing course. It contains 7 sections with multiple choice and long answer questions. Section A asks 10 short questions about topics like digital system elements, DFT, window functions, decimation, and upsampling. Section B has 3 long answer questions on IIR filter design, finite word length effects, and DIT FFT. Section C asks about FIR and IIR filter realizations. Later sections ask about filter design using bilinear transformation, symmetric FIR filter design, DFT properties, and multirate signal processing. The exam tests a wide range of DSP topics and requires calculations, explanations, and derivations in the responses.

Uploaded by

Avi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
484 views2 pages

Btech Ec 5 Sem Digital Signal Processing Kec503 2023

This document appears to be an exam for a Digital Signal Processing course. It contains 7 sections with multiple choice and long answer questions. Section A asks 10 short questions about topics like digital system elements, DFT, window functions, decimation, and upsampling. Section B has 3 long answer questions on IIR filter design, finite word length effects, and DIT FFT. Section C asks about FIR and IIR filter realizations. Later sections ask about filter design using bilinear transformation, symmetric FIR filter design, DFT properties, and multirate signal processing. The exam tests a wide range of DSP topics and requires calculations, explanations, and derivations in the responses.

Uploaded by

Avi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Printed Pages: 02 Sub Code: KEC-503

Paper Id: 2 3 2 1 7 4 Roll No.

B. TECH.
(SEM V) THEORY EXAMINATION 2022-23
DIGITAL SIGNAL PROCESSING
Time: 3 Hours Total Marks: 100
Note: Attempt all Sections. If require any missing data; then choose suitably.

SECTION A

1. Attempt all questions in brief. 2 x 10 = 20


(a) Explain the basic elements required for realization of digital system.
(b) Differentiate between recursive and non-recursive systems.
(c) Calculate the DFT of the sequence x(n) = {1, 2, 1, 3}.
(d) What is Twiddle factor? Write its properties.
(e) What is the difference between circular convolution and linear convolution?
(f) What is Frequency Warping?
(g) Demonstrate the term Gibb’s Phenomenon with schematic diagram.
(h) Write the expression for Hanning window.
(i) Explain the term Decimation with suitable example.
(j) Find the output of the sequence [1 2 3] after up sampling by a factor N=3.

2
90

13
_2

2.
SECTION B
P1

24
2. Attempt any three of the following: 10 x 3 = 30

5.
3D

(a) Determine DF – I & DF – II realization for a following IIR transfer function

.5
H(z) = (0.28z2 + 0.319z + 0.04)/(0.5z3 + 0.3z2 + 0.17z – 0.2)
P2

(b) 17
Explain Impulse response invariance method of IIR digital filter design. Also
Q

|1
explain mapping of poles from analog domain to digital domain.
(c) Explain finite word length effect in digital filters. Also explain (i) Coefficient
7
:3

quantization error (ii) Quantization noise – truncation and rounding.


44

(d) Derive and draw the flow graph for DIT FFT algorithm for N=8.
:

(e) Discuss QMF and sub-band coding of speech signals in detail.


13
3
02

SECTION C
-2

3. Attempt any one part of the following: 10 x 1 = 10


01

(a) Obtain direct form and cascade form realization for the transfer function of a
FIR system given by-
4-

1 3 1 1
|2

𝐻 𝑧 1 𝑧 𝑧 1 𝑧 𝑧
4 8 8 2
(b) (i) Explain the technologies used for DSP in detail.
(ii) Compare IIR and FIR digital filters.

QP23DP1_290 | 24-01-2023 13:44:37 | 117.55.242.132


4. Attempt any one part of the following: 10 x 1 = 10
(a) Using bilinear transformation, design a Butterworth filter which satisfies the
following conditions:
0.8 𝐻 𝑒 1 , 0 𝜔 0.2𝜋
𝐻 𝑒 0.2 , 0.6𝜋 𝜔 𝜋
(b) Obtain system function of digital filter which is resonant at 𝜔 , using
Bilinear Transformation from the system function of analog filter given as-
𝑠 0.1
𝐻 𝑠
𝑠 0.1 16

5. Attempt any one part of the following: 10 x 1 = 10


(a) Design a symmetric FIR low pass digital filter whose desired frequency
response is as-
𝑒 , 𝑓𝑜𝑟 1 𝜔 1
𝐻 𝜔
0, 𝑜𝑡ℎ𝑒𝑟𝑤𝑖𝑠𝑒
The length of the filter is 7 and 𝜔 1 𝑟𝑎𝑑𝑖𝑎𝑛 /𝑠𝑎𝑚𝑝𝑙𝑒. Use rectangular

2
90
window function.

13
_2

(b) Explain the concept of the Limit Cycle Oscillations & dead band effect with

2.
suitable example.
P1

24
5.
3D

6. Attempt any one part of the following: 10 x 1 = 10

.5
P2

(a)
17
Determine the DFT of the sequence x(n) = {1, 1, 2, 2, 3, 3} and determine the
Q

corresponding amplitude and phase spectrum.


|1
(b) Find the DFT of the following discrete time sequence using DIF FFT algorithm
7

x(n)= {1, -1, -1, -1, 1, 1, 1, -1}


:3
: 44

7. Attempt any one part of the following: 10 x 1 = 10


13

(a) Calculate the circular convolution using graphical method for


3

x(n) = [1, 2, 3, 4] and h(n) = [4, 3, 2, 1].


02

(b) Explain the process of multirate signal processing in detail. Also enlist the
-2

advantages of multirate signal processing.


01
4-
|2

QP23DP1_290 | 24-01-2023 13:44:37 | 117.55.242.132

You might also like