Input & Output Devices

Input Devices & their Uses

 An input device is any hardware device that allows a user to enter data or instructions into a

computer directly.

 An input device can send data to another device, but it cannot receive data from another device.

 Input devices are necessary for a computer to receive commands from its users and data to

process; the devices are under the control of the user or can be direct data entry.

Input devices can be complicated because they must ensure that the user can interact with the

computer correctly.

1. Keyboards:

Uses:

 Input of data into applications software

 Typing in commands to the computer

Advantages:

 Fast entry of new text into a document.

 Well-known method.

 Easy to use for most people.

 Easier to do verification checks as data is entered (can immediately compare the source

document with typed data on the screen).

Disadvantages:

 Can be difficult to use if the user has limited arm/wrist use.

 Slow method when compared to direct data entry.

 Fairly large device that uses up valuable desk space.

Uses:

 Automatic teller machines (ATMs), where the customer can key in their PIN, amount of money,

etc.

 Mobile phones to allow phone numbers, etc. to be keyed in.

 Point of sale terminals (POS) in case the barcode reader fails to read the barcode – the number

has to be keyed in manually by the operator.

 Chip and PIN devices when paying by credit/debit cards.

 Fast entry of numeric data into a spreadsheet.

Advantages:

 Faster than standard keyboards when entering numeric data.

 Because many are small devices, they are very easy to carry around.

Disadvantages:

 Sometimes have small keys which can make input more difficult.

 Sometimes the order of the numbers on the keypad is not intuitive.

3. Mouse:

Uses:

 opening, closing and minimizing software

 grouping, moving and deleting files.

 image editing, for example, controlling the size and position of a drawing pasted into a document.

 controlling the position of a pointer on the screen to allow selection.

Advantages:

 Faster method for choosing an option rather than using a keyboard.

 Very quick way of navigating through applications and the internet.

 Does not need a large desk area when compared to a keyboard.

 Can be more difficult for people with restricted hand/wrist movement than using a keyboard for

data entry.

 Easy to damage, and the older type of mouse quickly becomes clogged up with dirt.

 Difficult to use if no flat surface readily available.

4. Touchpad:

Uses:

 opening, closing and minimizing software

 grouping, moving and deleting files.

 image editing, for example, controlling the size and position of a drawing pasted into a document.

 controlling the position of a pointer on the screen to allow selection.

Advantages:

 faster than a keyboard for choosing options.

 used to navigate applications and the internet.

 Because the touchpad is integrated into the laptop computer, there is no need for a separate

mouse, this aids the portability and is a big advantage if there are no flat surfaces available.

Disadvantages:

 People with limited hand/wrist movement find the device difficult to use.

 Can be more difficult to control the pointer when compared to a normal mouse.

 Drag and drop operations are more complicated using a touchpad.

5. Tracker ball:

Uses:

 good alternative to a mouse for people with conditions such as RSI.

 Used in an industrial control room environment.

 Used in some luxury cars to select functions such as radio.

 Does not need the same fine control as a mouse.

 Easier to use than a mouse if the operator has problems with their wrist.

 More accurate positioning of the pointer on screen.

 They are more robust than a mouse.

 Needs less desk space than a mouse or keyboard.

Disadvantages:

 Not supplied with the computer as standard, therefore more costly.

 Users may need training because it is not standard equipment.

6. Remote control:

Uses:

 Televisions, satellite systems, DVD/Blu-ray players and Hi-Fi systems, to alter controls such as

volume, on/off etc.

 Used to control multimedia systems.

 Used in industrial applications to remotely control processes.

Advantages:

 Can be operated from any reasonable distance.

 Safer in some conditions, e.g., in chemically hazardous environments, we can control and

measure from safe distances.

Disadvantages:

 Difficult to use for people with limited hand/wrist movements.

 The signal can easily be blocked by physical obstacles.

Uses:

 Used in video games.

 Used in simulators, to mimic the actual controls.

Advantages:

 Easier than keyboards for screen navigation.

 In some applications, the control is more realistic than using a mouse.

Disadvantages:

 The on-screen pointer is more difficult to use.

8. Driving wheel:

Uses:

 Used in video games, especially car racing games.

 Used in simulators, to mimic actual vehicle controls.

Advantages:

 More realistic experience than both mouse and joystick.

 Easier than a keyboard or joystick to control steering movements.

Disadvantages:

 Rather expensive input device as compared to a mouse or joystick.

 Steering movements tend to be over-sensitive, which gives an unrealistic feel.

 Unless it is an expensive simulator, feedback to steering wheel is non-existent.

9. Touch screen (as an input device):

Uses:

 Automatic teller machines (ATMs) to choose from on-screen options.

 Point of sale terminals such as in restaurants.

 Interactive white boards in education.

Advantages:

 Faster entry of options than using keyboard or mouse.

 Very easy method for choosing options.

 User-friendly method – no training necessary in its use.

 Option to expand the size of the display if necessary.

Disadvantages:

 Limited number of input options available.

 Can lead to problems if an operator has to use the system frequently (straining of arm muscles,

RSI, etc. are all possible).

 The screen can get very dirty with constant touching.

10. Scanners:

Uses:

 Scanning in documents and converting into different formats

 Scanning in old documents to protect them, in case original is lost/damaged.

 Scanning in photographs for storage

 Scanning in barcodes at POS terminals.

Advantages:

 Images can be stored for editing at a later date.

 When used with OCR, they are much faster and more accurate than typing the documents in.

 Possible to recover damaged documents by scanning in and producing an acceptable copy.

Disadvantages:

 Limited quality, depending on how good the scanner’s resolution is.

 Fairly slow input method, especially if color mode is selected.

Uses:

 Taking photographs, still better than smartphones and tablets.

 Data-capture device, e.g., as a reversing aid in cars.

 Dentistry, to help capturing pictures for better diagnosis.

 The creation of virtual reality tours around houses, buildings etc.

Advantages:

 Easier to produce better-quality photographs than with a traditional camera.

 Faster to upload photographs to a computer than scanning in hard copies.

 Memory cards can store many thousands of photographs.

 No need to develop film and make printouts, saves money and is more environmentally friendly.

 Unwanted images can easily be deleted from memory card.

Disadvantages:

 Need to be computer literate to know proper use.

 Loss of artistry due to clever software doing all the work.

 Images need to be compressed to reduce amount of memory used.

12. Microphones:

Uses:

 To input speech to be used in various applications.

 Input in voice recognition software for authentication.

 As a sensor, to pick up sound, in an intruder alarm system.

 Used in audio conferencing or VoIP applications.

Advantages:

 Faster to read in text than it is to type it in.

 Possible to manipulate sound in real time rather than working on a completed recording.

 Improves security, if used as an authentication system.

 Sound files use up a lot of computer memory.

 Reading in data is more error prone than typing in.

13. Sensors:

Uses:

 Temperature sensors are used in automatic washing machines, central heating systems, ovens,

automatic glasshouses.

 Pressure sensors are used in intruder alarm systems, washing machines.

 Light sensors are used in automatic glasshouses, automatic doors, street lighting control.

 Sound/acoustic sensors are used in intruder alarm systems, monitoring liquid and powder flow in

pipes.

 Humidity/moisture sensors are used in automatic glasshouses, environmental monitoring, in

factories where moisture levels are crucial.

 pH sensors are used in automatic glasshouses, chemical processes and environmental

monitoring.

Advantages:

 Readings are more accurate as compared to human operators.

 Readers are continuous, no breaks in the monitoring.

 Because it is a continuous process, any action or warnings needed will be initiated immediately.

 Automatic systems don’t need human intervention.

Disadvantages:

 Faulty sensors can give spurious results.

 Most sensors are analogue; therefore, they require conversion using Analogue to Digital

Convertors.
 14. Light pens:

Uses:

 Selecting object on CRT screens

 Drawing on screens

Advantages:

 Greater accuracy than touch screens

 Small, makes them portable as well as capable of being used in small spaces.

 Easy-to-use technology.

Disadvantages:

 Lagging problems while drawing on screen.

 Only works with CRT monitors.

 Rather dated technology.