Scribd
Upload
144 views1 page

Cds Dino Vam 13.375in. 72lb-Ft p110 API Drift 12.191in. 87.5%

This document provides technical specifications for a pipe connection including: - The pipe has a 13.375 inch outer diameter, 12.347 inch inner diameter, and is made from grade P110 steel. - The connection is a semi-premium threaded and coupled joint with a nominal outer diameter of 14.374 inches. - The connection has a make-up torque range of 18,450 to 24,950 foot-pounds and is rated to withstand internal pressures up to 7,400 psi.

Uploaded by

secanggang.scgd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
144 views1 page

Cds Dino Vam 13.375in. 72lb-Ft p110 API Drift 12.191in. 87.5%

This document provides technical specifications for a pipe connection including: - The pipe has a 13.375 inch outer diameter, 12.347 inch inner diameter, and is made from grade P110 steel. - The connection is a semi-premium threaded and coupled joint with a nominal outer diameter of 14.374 inches. - The connection has a make-up torque range of 18,450 to 24,950 foot-pounds and is rated to withstand internal pressures up to 7,400 psi.

Uploaded by

secanggang.scgd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Generated on November 10, 2023

CONNECTION DATA SHEET

PIPE BODY PROPERTIES


OD: 13.375 in. Grade: P110
Nominal OD 13.375 in.
Weight: 72.00 lb/ft Drift: 12.191 in. (API)
Nominal ID 12.347 in.
Wall Th.: 0.514 in.
Nominal Wall Thickness 0.514 in.
Minimum Wall Thickness 87.5 %
DINO VAM Nominal Weight (API) 72.00 lb/ft
Plain End Weight 70.67 lb/ft
Drift 12.191 in.
Grade Type API 5CT
Minimum Yield Strength 110 ksi
Maximum Yield Strength 140 ksi
Minimum Ultimate Tensile Strength 125 ksi
Pipe Body Yield Strength 2,284 klb
Internal Yield Pressure 7,400 psi
Collapse Pressure 2,880 psi

T&C CONNECTION PROPERTIES


Connection Type Semi-Premium Threaded & Coup
Nominal Connection OD 14.374 in.
Nominal Connection ID 12.463 in.
Field Torque Values
Make-up Loss 4.754 in.
Coupling Length 9.523 in.
Make-up Torque (ft-lb)
Tension Efficiency 100 % Pipe Body
18,450 MIN
Compression Efficiency 50 % Pipe Body
21,700 OPTI
Internal Pressure Efficiency 100 % Pipe Body
24,950 MAX
External Pressure Efficiency 100 % Pipe Body

JOINT PERFORMANCES
Tension Strength 2,284 klb
Compression Strength 1,142 klb
Internal Pressure Resistance 7,400 psi
External Pressure Resistance 2,880 psi
Maximum Bending, Structural 28 °/100 ft
Maximum Load on Coupling Face 1,637 klb

The information available on this Site (‘Information’) is offered for general information. It is supposed to be correct at the time of publishing on the Site but is not intended to constitute professional advice and is provided ‘as is’. Vallourec
does not guarantee the completeness and accuracy of this Information. Under no circumstances will Vallourec be liable for damage, liability of any kind, or any loss or injury that may result from the credibility given to this Information or
its use. The Information may be amended, corrected, at any time by Vallourec without warning. Vallourec’s products and services are subject to Vallourec’s The Information may be amended, corrected, and/or supplemented at any time
by Vallourec without warning. standard terms and conditions or otherwise to the terms resulting from the respective contracts of sale or services.

You might also like