http://hwgpon.blogspot.com/2017/02/como-adicionar-uma-ont-em-uma-olt-da.

html
https://www.youtube.com/watch?v=HnV0vKhY-m0

IP PADRAO 10.11.104.2

USER: root
SENHA: admin123

MA5608T>display version
{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:

Command:
display version

VERSION : MA5600V800R017C00
PATCH : SPC101 HP1009
PRODUCT : MA5608T

Active Mainboard Running Area Information:

--------------------------------------------------
Current Program Area : Area A
Current Data Area : Area A

Program Area A Version : MA5600V800R017C00

Program Area B Version : MA5600V800R017C00

Data Area A Version : MA5600V800R017C00

Data Area B Version : MA5600V800R017C00
--------------------------------------------------

Uptime is 0 day(s), 4 hour(s), 26 minute(s), 34 second(s)

>enable

MA5608T#config

MA5608T(config)#

MA5608T(config)#display board 0

-------------------------------------------------------------------------
SlotID BoardName Status SubType0 SubType1 Online/Offline
-------------------------------------------------------------------------
0
1 H806GPBD Normal
2
3 H801MCUD1 Active_normal CPCB
4 H801MPWC Normal
5
-------------------------------------------------------------------------

> > Aqui ele est� mostrando tudo que est� conectado no chassis, em status deve
> > aparecer dessa forma, caso esteja aparecendo auto_find voc� precisa rodar
> > outro comando
MA5608T(config)#board confirm 0

#DELETAR ALGUMA PLACA NA OLT

MA5608T(config)# board delete 0/x (x � o numero do slot)

#PARA RESETAR A PLACA

MA5608T(config)#boara reset 0/x

MA5608T(config)#save

MA5608T(config)#display board 0/0

---------------------------------------
Board Name : H806GPBD
Board Status : Normal
---------------------------------------

------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
------------------------------------------------------------------------------
-------------------------------------------------------------
Port Port min-distance max-distance Optical-module
type (km) (km) status
-------------------------------------------------------------
0 GPON 0 20 Online
1 GPON 0 20 Online
2 GPON 0 20 Online
3 GPON 0 20 Online
4 GPON 0 20 Online
5 GPON 0 20 Online
6 GPON 0 20 Online
7 GPON 0 20 Online
-------------------------------------------------------------
In port 0/ 1/0 , the total of ONTs are: 0, online: 0
In port 0/ 1/1 , the total of ONTs are: 0, online: 0
In port 0/ 1/2 , the total of ONTs are: 0, online: 0
In port 0/ 1/3 , the total of ONTs are: 0, online: 0
In port 0/ 1/4 , the total of ONTs are: 0, online: 0
In port 0/ 1/5 , the total of ONTs are: 0, online: 0
In port 0/ 1/6 , the total of ONTs are: 0, online: 0
In port 0/ 1/7 , the total of ONTs are: 0, online: 0

MA5608T(config)#display board 0/3

---------------------------------------
Board Name : H801MCUD1
Board Status : Active normal
---------------------------------------

------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
 ------------------------------------------------------------------------------
Subboard[0]: H801CPCB Status: Normal
------------------------------------------------------------------------------
Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN (Mbps) Ctrl State
------------------------------------------------------------------------------
0 GE absence 1 - auto auto off active offline
1 GE absence 1 - auto auto off active offline
2 GE absence 1 - auto auto off active offline
3 GE absence 1 - auto auto off active offline
------------------------------------------------------------------------------

MA5608T(config)#display board 0/4

---------------------------------------
Board Name : H801MPWC
Board Status : Normal
---------------------------------------

------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
------------------------------------------------------------------------------
Main Board: H801MPWC
---------------------------------------
Pcb Version: H801MPWC VER A
Mab Version: 0001

MA5608T(config)#interface gpon 0/x

MA5608T(config-if-gpon-0/x)#

MA5608T(config-if-gpon-0/x)#display port state all

----------------------------------------------------------------------------
F/S/P 0/x/y
Optical Module status Online
Port state Offline
Laser state Normal
Available bandwidth(Kbps) 1238420
Temperature(C) 44
TX Bias current(mA) 38
Supply Voltage(V) 3.19
TX power(dBm) 5.04
Illegal rogue ONT Inexistent
Max Distance(Km) 20
Wave length(nm) 1490
Fiber type Single Mode
Length(9um)(km) 20.0
----------------------------------------------------------------------------
F/S/P 0/1/1
Optical Module status Online
Port state Offline
Laser state Normal
Available bandwidth(Kbps) 1239040
Temperature(C) 44
TX Bias current(mA) 31
---- More ( Press 'Q' to break ) ----
MA5608T(config-if-gpon-0/x)#port 0 ont-auto-find enable

MA5608T(config-if-gpon-0/x)#port 1 ont-auto-find enable

MA5608T(config-if-gpon-0/x)#port 2 ont-auto-find enable

fazer ate 8 ou 16 portas, depende da placa

MA5608T(config-if-gpon-0/x)#display ont autofind 0

----------------------------------------------------------------------------
Number : 1
F/S/P : 0/0/0 (SLOT 0/ PORTA 0)
Ont SN : 4857544359E9288F (HWTC-59E9288F)
Password : 0x00000000000000000000
Loid :
Checkcode :
VendorID : HWTC
Ont Version : 635.A
Ont SoftwareVersion : V3R015C10S106
Ont EquipmentID : 010H
Ont Customized Info : -
Ont autofind time : 2019-04-13 10:30:25+08:00
----------------------------------------------------------------------------

MA5608T(config-if-gpon-0/1)#display ont autofind 1

MA5608T(config-if-gpon-0/1)#display ont autofind 2
MA5608T(config-if-gpon-0/1)#display ont autofind 3

vai de 8 a 16 portas, dependendo da placa

MA5608T(config)#ont-srvprofile gpon profile-id 1 profile-name Pindai

MA5608T(config-gpon-srvprofile-1)#ont-port ?
---------------------------------------------
Command of (config-gpon-srvprofile-1)# Mode:
---------------------------------------------
catv CATV port
eth ETH port
moca MOCA port
pots POTS port
tdm TDM port
tdm-srvtype TDM service type
tdm-type TDM type
vdsl VDSL port
wifi WiFi port

MA5608T(config-gpon-srvprofile-1)#ont-port eth ?
---------------------------------------------
Command of (config-gpon-srvprofile-1)# Mode:
---------------------------------------------
adaptive Number of ETH ports is adaptive
eth-port<U><0,24> Number of ETH ports
MA5608T(config-gpon-srvprofile-1)#ont-port eth 1
{ <cr>|catv<K>|moca<K>|pots<K>|tdm-srvtype<K>|tdm-type<K>|tdm<K>|vdsl<K>|wifi<K> }:

Command:
ont-port eth 1

MA5608T(config-gpon-srvprofile-1)#port vlan eth 1 1977

{ <cr>|priority<K>|prival<U><0,7>|TLS<K> }:

Command:
port vlan eth 1 1977
Set ONT port(s) VLAN configuration, success: 1, failed: 0

MA5608T(config-gpon-srvprofile-1)#commit

interface gpon 0/x

MA5608T(config-if-gpon-0/0)#ont confirm 0 sn-auth 4857544359E9288F omci ont-

lineprofile-id 1 ont-srvprofile-id 1 desc G20
Number of ONTs that can be added: 1, success: 1
PortID :0, ONTID :0

MA5608T#display current-configuration

MA5608T(config-gpon-srvprofile-1)#display ont-srvprofile current

-----------------------------------------------------------------------------
Profile-ID : 1
Profile-name: Pindai
Access-type : GPON
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS 0 -
ETH 0 -
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
 Multicast mode : Unconcern
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
IPHOST 1 0
-----------------------------------------------------------------------------
Binding times : 0
-----------------------------------------------------------------------------

MA5608T#display sysman service state

---------------------------------------------------------------------------
Network service Port State
---------------------------------------------------------------------------
telnet 23 enable
trace 1026 disable
ssh 22 enable
telnet-proxy 8023 enable
snmp 161 enable
ftp-client ---- ----
sftp-client ---- ----
ntp 123 enable
radius 65471 enable
dhcp-relay 67 enable
dhcpv6-relay 547 enable
ntp6 123 enable
radius-das 3799 enable
---------------------------------------------------------------------------
https://networkingfromzero.wordpress.com/2017/03/31/gpon-basic-command-olt-huawei/
https://networkingfromzero.wordpress.com/2017/06/21/how-to-register-ont-huawei/

https://www.anteny24.com/how-to-configure-huawei-ma5608t-olt-with-huawei-onts
https://www.anteny24.com/echolife-hg8010h-gpon-ont-1ge-en/ontonu