Scribd
Upload
1K views2 pages

MSM-3017 D

This document provides specifications for a bill acceptor sensor set, including electrical specifications, operating temperature range, weight, enclosure details, and optional accessories. It also includes information on dip switch settings, MDB connector pinout, jumper settings, diagnostics codes, and dimensions.

Uploaded by

belakov.avrora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

MSM-3017 D

This document provides specifications for a bill acceptor sensor set, including electrical specifications, operating temperature range, weight, enclosure details, and optional accessories. It also includes information on dip switch settings, MDB connector pinout, jumper settings, diagnostics codes, and dimensions.

Uploaded by

belakov.avrora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

6.

General Specifications:
SENSOR SET: Implementation 02
User Guide
CURRENCY AND INTERFACES See Software Description document

ELECTRICAL SPECIFICATION:
Operating Voltage Maximum Operating Current Maximum Current
24V AC/34V DC 0.36 A 2.0 А
Use only current limiting CSA or UL recognized CLASS 2 Power Supply. Bill Validator with Stacker
OPERATING TEMPERATURE: -18 to +60 degrees Celsius
TOTAL WEIGHT: 1.75 kg Hardware part # MSM-3017
FEATURES: Standard Plastic Bezel, Handled Bill width 62…78 mm
The Part Number on the Label includes Hardware
Part Number and Software Part Number.
ENCLOSURE: Bill Acceptor with a Stacker
User's Guide Example
MSM-3017 AA0000
Software description
Accessories: Software Part Number
Front Label Hardware Part Number
MDB Harness, Part # OPT-HS-MDB

OPTIONAL ACCESSORIES:
MDB test adapter; Part # OPT-AD-MDB
Single Price Interface Adapter, Part # OPT-AD-SP
Executive Interface Adapter, Part # OPT-AD-HII

Crane Payment Solutions


CashCode Brand
2720 Steeles Avenue West, Units 2-3, Concord, ON Canada L4K 4S3
Phone: (905) 303-8874 Toll Free: (800) 584-2633 Fax: (905) 303-8875
www.craneps.com http://support.cashcode.com

 2013 Crane Payment Solutions PT# UG-MSM-3017_E 10/13


1. DIP Switches Setting
4. Diagnostics
See Software Description document. Count the number of flashes and compare with the diagnostic chart below:
## of flashes Malfunction
2. MDB connector pinout
1 red on black Cassette is removed from bill acceptor
3 red on black Cassette is full
Pin Circuitry Wire colour
4 red on black Failure of stacker mechanism
1 AC / DC(-) Brown
5 red on black Failure of capacitance sensors
2 AC / DC(+) White
6 red on black Failure of optical sensors
3 GND -
7 red on black Failure of magnetic sensors
4 Reserved (OUT) -
8 red on black Transporting motor failure (timeout)
5 Master Receive Black
10 red on black Failure of aligning mechanism
6 Reserved (IN) -
11 red on black Bill pathway is not empty (bill is jammed)
7 Common Green
12 red on black Fail rejecting a bill. Bill is in the entry slot of the cassette.
8 Master transmit Red
1 green on red COM port CRC Error
Mating connector:
2 green on red Internal CRC Error
MOLEX: Dual Row Interim Clip #15-04-5084 - 1 pcs.
3 green on red Improper CCMS format
Single Row Crimp Housing #50-57-9304 - 2 pcs.
Fem. Box, Crimp Terminals #16-02-0086 - 7 pcs. 4 green on red CCMS is absent
5 green on red Improper type of CCMS
6 green on red Download Error

3. Jumper Settings 5. Dimensions


Viev A
for MDB Mode (Default) Connection to OPT-AD-MDB,
OPT-AD-SP, OPT-AD-HII

JP1
1

You might also like