Chemlab Laboratory Equipments
BOD Incubator
Operating and Maintenance Manual
TECHNICAL SPECIFICATIONS OF BOD INCUBATOR
Model No. BOA - 2 BOA - 4 BOA - 6 BOA - 10 BOA - 12 BOA - 15
Usable 405 x 405 x 610 x 450 x 845 x 500 x 870 x 570 x 900 x 650 x 700 x 900 x
Space in MM 405 410 400 560 570 650
Capacity 2 cu. ft 4 cu. ft 6 cu. ft 10 cu. ft 12 cu. ft 15 cu. ft
Approx
60 ltrs 113 ltrs 173 ltrs 282 ltrs 342 ltr 421 ltrs
Volume (Ltr)
No. of
2 2 2 2 2 2
Shelves
Temperature
5°C above ambient to 60°C (Resolution 0.1°C)
Range
Chemlab Laboratory Equipments
Temp.
By Microprocessor Based PID Digital Temperature Indicator and Controller.
Controller
Temp.
+0.5°C
Accuracy
Display LED Display for Set Value(SV) and Process Value (PV)
Relay Solid state electronic relay with protective heat sink.
Auto Tuning
System is compatible with auto tuning system
System
Air
By forced convection system
Circulation
Insulation By High density PUF insulation
Electric
220/230V AC, 50/60Hz
Supply
Introduction –
You can easily know about parts of the apparatus to see the above
picture. The apparatus is very useful for Cooling and heating the particles. The temperature
is controlled by thermostatic branded digital TEMP .controller the whole cabinet supply. The
cabinet workable on 220V AC 50Hz.
How to use –
1. Set the particles on inside shelves as you’re convenient
2. Close the door.
3. Plug in the apparatus and switch ON.
4. The main indicator will be blink
5. Cabinet 1 :- Main Switch ON
Cooling Switch ON
Heating switch ON
6. Set Temp. :- Press Set Button (SV –Set Value , PV- Present Value) then press UP
or Down button and press set button.
Chemlab Laboratory Equipments
7. Set the temperature on Digital Temp. control.
8. Digital Temp. Control : Temp. UP or DOWN +/- 2 to 3 Degree C
Precautions –
1. Clean the apparatus after use.
2. Always wear gloves
3. Do not fill the excess partials in the apparatus.
4. Be careful when open the door.
Safety Instructions
Please read this manual carefully before using this product for optimal use. The indicated
cautions are related to safety and you should observe all safety and warning instructions to
avoid potential damage to product and injury to operators. Keep this manual for future
reference.
Note: Use this product only in the way described in the product literature and this manual.
Before using the product, verify that this product is suitable for its intended use.
Do not modify the system components or use the unauthorized parts as this will void the
product warranty.
Chemlab Laboratory Equipments