GRADE LEVEL : Grade 11

TRACK : Technical Vocational Livelihood Track

SPECIALIZATION : Electrical Installation and Maintenance
COMPONENT : Industrial Arts

K to 12 BASIC EDUCATION CURRICULUM

SENIOR HIGH SCHOOL TECHNICAL VOCATIONAL LIVELIHOOD TRACK
INDUSTRIAL ARTS –ELECTRICAL INSTALLATION AND MAINTENANCE NC II
BUDGET OF WORK
S.Y. 2020-2021

QUARTER MOST ESSENTIAL LEARNING COMPETENCIES NO. OF DAYS TAUGHT

(MELC)
1st KEY CONCEPTS AND FUNDAMENTALS OF
QUARTER ELECTRICAL INSTALLATION AND MAINTENANCE
LO 1. Discuss the key concepts, principles and 4
fundamentals in EIM
1.1Discuss therelevance ofthecourse
1.2Explainthecoreconcepts ofElectrical
Installation and Maintenance NC II
1.3Explorejobopportunities related to Electrical
Installation and Maintenance NC II

LO 2 Discuss the fundamentals and elements of 8

electricity and EIM
2.1 Discuss the nature of electricity and other
related theory and principles
2.2 Explain electrical circuits
2.3 Analyze and perform circuit computation 4
applying Ohm’s Law

PREPARING ELECTRIC AND HYDRAULIC TOOLS

LO 1. Select electric and hydraulic tools 6
1.1 Request tools, equipment and materials
1.2 Identify electric and hydraulic tools for the task
1.3 Inspect tools and equipment for damage prior 6
to its use
1.4 Report damage tools
2ND LO 2. Maintain electric and hydraulic tools 6
QUARTER 2.1 Check the conditions of electric and hydraulic
tools
2.2 Lubricate electric tools in line with
manufacturer’s specification
2.3 Replace auxiliary part of electric and hydraulic 6
tools according to manufacturer’s specification
2.4 Store electric and hydraulic tools
 LO 2. Maintain electric and hydraulic tools 6
2.1 Check the conditions of electric and hydraulic
tools
2.2 Lubricate electric tools in line with
manufacturer’s specification
2.3 Replace auxiliary part of electric and hydraulic 6
tools according to manufacturer’s specification
2.4 Store electric and hydraulic tools
PERFORMING ROUGHING-IN ACTIVITIES
LO 1. Install electrical metallic and non-metallic 10
conduit
1.1 Prepare tools/equipment and materials
needed for the installation of electrical metallic
and no- metallic conduit in line with job
requirements
1.2 Install electrical metallic and non-metallic
conduit according to the job requirements following
PEC and NEC
1.3 Observe safety procedure in installing electrical 6
metallic and non-metallic conduit
1.4 Perform installation according to OHS
guidelines and procedures

3rd LO 2. Install wire ways and cable trays 4

QUARTER 2.1 Prepare tools/equipment and materials
needed for the installation of wire ways and cable
trays in line with job requirements
2.2 Install wire ways and cable trays according to 8
the job requirements following PEC and NEC
2.3 Observe safety procedure in installing wire
ways and cable trays according to OHS guidelines
and procedures
LO 3. Install telephone terminal cabinet 4
3.1 Prepare tools/equipment and materials needed
for the installation of telephone terminal cabinet in
line with job requirement.

3.2 Install telephone terminal cabinet according to 8

the job requirements following PEC and NEC
3.3 Observe safety procedure in installing
telephone terminal cabinet according to OHS
guidelines and procedures
LO 4. Install cable bridge 4
4.1 Prepare tools/equipment and materials
needed for the installation of cable bridge in line
with job requirements
 4.2 Install cable bridge according to the job 8
requirements following PEC and NEC
4.3 Observe safety procedure in installing cable
bridge according to OHS guidelines and procedures
4th INSTALLING STANDARD ELECTRICAL PROTECTION
QUARTER FOR LIGHTING AND GROUNDING
LO 1. Plan and prepare work 10
1.1 Read measurement in terms of:
1.1.1 Resistance
1.1.2 Current
1.1.3 Voltage
1.2 Use measuring/testing instrument
1.2.1 Ohmmeter
1.2.2 Ammeter
1.2.3 Voltmeter
1.2.4 Clamp meter
1.2.5 Kilo watt hour meter
1.3 Interpret blueprint of electrical plan 10
1.4 Plan and prepare electrical materials and tools
for the installation of:
1.4.1 Electrical meter connection and grounding
1.4.2 Service entrance and circuit breaker/safety
switch installation of a residential structure
LO 2. Install standard electrical protection system 10
for lighting and grounding
2.1 Perform the installation of:
2.1.1 Electrical meter connection and grounding
2.1.2 Service entrance and circuit breaker/safety
switch of a residential structure
2.2 Follow schedule of work to ensure completion 10
at agreed time and quality standards
2.3 Check quality of work following instruction and
requirements
2.4 Follow safety procedure