Scribd
Upload
71 views1 page

M22X90

This certificate documents the results of quality testing for a batch of M22-2.5X90 hex bolts with a black finish. Test results show the bolts meet standards for chemical composition, mechanical properties like tensile strength and hardness, dimensions, thread tolerances, surface finish, and coating adherence. The certificate provides specific test values within allowed ranges to certify the quality of the batch.

Uploaded by

amicikicik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views1 page

M22X90

This certificate documents the results of quality testing for a batch of M22-2.5X90 hex bolts with a black finish. Test results show the bolts meet standards for chemical composition, mechanical properties like tensile strength and hardness, dimensions, thread tolerances, surface finish, and coating adherence. The certificate provides specific test values within allowed ranges to certify the quality of the batch.

Uploaded by

amicikicik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CERTIFICATE OF QUALITY EN10204 3.

CERTIFICATE No.: 19NBF-247-2


Date of testing: DEC.10,2020 Standard Reference:
Customer: Mechanical Property: In according to with specification of JIS B1186
Dimension: In according to with JIS B1186

Product description: HEX BOLT,F10T,BLACK


Size: M22-2.5X90
Surface Finish: BLACK
Head Mark: KAMU F10T

1. CHEMICAL ANALYSIS (%)


C Mn Si P S Ni Cr Mo
Standard Value 0.37~0.44 0.50-0.80 0.17-0.37 ≤0.035 ≤0.035 ≤0.30 0.80~1.10 /
Test Value 0.40 0.78 0.20 0.018 0.007 0.01 0.90 /

2. MECHANICAL PROPERTIES

Tensile ROCKWELL
Tensile ELONGATION
Test Item Strength HARDNESS
Load(MIN,KN) (MIN,%)
(Mpa) (HRC)

Standard Value 1000-1200 27-38 245 14


Test value 1100 30-36 250 16

3. DIMENSIONAL ANALYSIS (MM)

Width across Width across Thread length Nominal


Test Item Head height (k) Diameter (d)
flats (s) corner ( e) (b) length (l)

Max. 36.00 / 14.90 46.00 91.40 /


Standard Value
Min. 35.00 / 13.10 40.00 88.60 /
Test Value 35.50-36.00 / 13.5-14.50 42-46 89-91.00 /

4. THREAD TOLERANCE 5. SURFACE FINISH


Coating Adherence
Test Item GO STOP Test Item Surface visual
Thickness (μm) test

Standard Value 6g 6g Standard Value OK OK OK

Test result OK OK Test Value OK OK OK

Page 1 of 1

You might also like