Name: Alexys Wilson Date:

Student Exploration: Cladograms

Vocabulary: adaptation, amino acid, amnion, artiodactyla, bipedal, clade, cladistics, cladogram,
convergent evolution, evolution, flower, mammary glands, molecular, morphological,
multicellular, parsimony, sagittal crest, phloem, selenodont teeth, SNP, xylem

Prior Knowledge Questions (Do these BEFORE using the Gizmo.)

1. Look at the images below. Which two organisms do you think are most closely related?

A deer and turtle

Worm Deer Turtle

2. Why do you think so? Both turtles and deers have 4 legs and they have a tail, meanwhile
the worm is just a body

Gizmo Warm-up
Cladistics is a method of hypothesizing the evolutionary
relationships between species. A cladogram is a branching diagram
that illustrates these relationships. For example, the cladogram on the
right shows that deer are more closely related to turtles than to
worms. In the Cladograms Gizmo, you will use morphological
(physical characteristics) and molecular data to create cladograms.

To begin, make sure Plants is selected for the Organism group and Morphological is
selected for the Data type. Click on one of the characteristics to the left of the table on the
TABLE tab. Information about the characteristic will be shown on the ORGANISM tab.

Using the information on the ORGANISM tab, describe each of the characteristics below.

● Xylem and phloem: It’s the tissues inside a plant and it helps water flow through the plant
and dissolve minerals

● Flowers: Contains reproductive organs of a plant

● Multicellularity: Made of more than one cell

2018
 Activity A: Get the Gizmo ready:

Morphological ● Check that Plants and Morphological are still

cladogram selected for the group and data type.

Question: How do you build a simple cladogram based on physical characteristics?

1. Fill in: Using what you learned in the warm-up, fill in the table. Clicking one of the boxes of
the table will add a check mark to indicate the presence of a characteristic. Then, select
Check table and adjust any of the boxes you may have filled in incorrectly.

Which organism has the fewest shared characteristics? Algae

2. Organize: Now you are ready to organize the table.

A. How many characteristics (check marks) does each organism have?

Algae: 0 Arabidopsis: 3 Cycad: 2 Moss: 1

Drag the arrows ( ) below the table to order the organism columns from fewest
characteristics on the left to most on the right.

B. How many organisms have each characteristic?

Multicellularity: 3 Xylem and phloem: 2 Flowers: 1

Drag the arrows to the right of the table to order the characteristics from fewest
organisms on the top to most on the bottom.

3. Build: Select the CLADOGRAM tab at the top left. The goal of a cladogram is to show the
relationships among a group of organisms. Organisms that are most closely related should
share the most recent common ancestor (highest branch on the tree). Organisms that are
most distantly related should share the oldest common ancestor (lowest branch on the tree).

Click the segments on the cladogram template

to build your own cladogram that shows how
you think the different plants are related.

Sketch you cladogram in the space to the right.

Answer the following questions based on your

cladogram.

A. Which two organisms are most closely related? Cycad & arabidopsis

B. Which organisms are most distantly related? Algae & arabidopsis

(Activity A continued on next page)

2018
Activity A (continued from previous page)

4. Analyze: On a completed cladogram, the orange dot that connects

two branches represents a common ancestor. In the cladogram to
the right, organisms B and C descended from a common ancestor
(D) that was more recent than the common ancestor (E) of
organisms A, B, and C.

Describe how the organisms in your cladogram are related through common ancestors.

5. Label: The purple lines represent a characteristic change, or adaptation. On the cladogram
above, organisms B and C share characteristic 3. Organism B either gained or lost
characteristic 1 after diverging from organism C.

In the Gizmo, select a purple line to open a text box and fill in the characteristics.

Based on your cladogram, from oldest to newest, in what order did the three characteristics
(flowers, multicellularity, and xylem/ phloem) evolve?

Multicellularity, xylem/phloem, flowers

6. Score: The parsimony principle states that the most likely solution is usually the simplest. In
general, biologists try to create cladograms that require the fewest evolutionary changes.
For example, it is more likely that xylem and phloem evolved once rather than multiple
times. The “parsimony score” calculates how many changes occur in a given cladogram.

A. How many changes (purple lines) occurred in your cladogram? 3

B. Select Show parsimony score. What is the score of your cladogram? 3

C. Select Show best possible parsimony score. Have you created a cladogram with

the least number of possible characteristic changes? yes

7. Revise: If you have not created a cladogram with the lowest possible parsimony score,
adjust the cladogram until you do. Make sure that the organisms are ordered from fewest
shared characteristics on the left to most shared characteristics on the right.

Select Show accepted cladogram. Does your cladogram match the scientifically accepted

cladogram? yes

2018
Click the camera ( ) to take a snapshot of your cladogram. Right click the image, select
Copy, and then paste the image into a blank document that you will turn in with this sheet.

2018
 Get the Gizmo ready:
Activity B:
● Select Insects for the organism group and
Cladogram
Morphological for the data type.
practice
● Select the ORGANISMS tab.

Introduction: In this activity, you will practice creating larger, more complex cladograms.

Question: How do you create parsimonious cladograms with more complex branching?

1. Build: As you did in activity A, use the information provided to fill in the table of
characteristics for insects. Check that your table is correct. On the CLADOGRAM tab, use
your table to create an insect cladogram. Make adjustments until you achieve the lowest
possible parsimony score, and then compare your cladogram to the accepted cladogram.
When you are done, take a snapshot of the cladogram and save it in your document.

What is the lowest possible parsimony score? 4

Which two insects are most closely related? Bee and Beetle

2. Build: Create cladograms for the Primates and Animals groups

(skip the Artiodactyla for now). These cladograms are a little
more complex, and you may have to include multiple branches
at the same level, such as in the example shown at the right.
When you have built cladograms with the lowest possible
parsimony score, compare them to the accepted cladogram.

Take snapshots of the finished cladograms and save them in your document.

3. Observe: Sometimes a trait can evolve separately in different groups. For example, both
bats and birds have wings, but their common ancestor did not have wings.

In the Animals cladogram, which trait evolved two different times? Bipedal

4. Think and discuss: What could cause similar traits to evolve independently in different
species?

2018
 If there’s multiple species living in the same habitat they would need to develop similar traits
in order to survive in that environment

Species that live in the same environment or face similar threats may need to develop traits
that help them adapt to their situations. For example, hedgehogs and porcupines
independently evolved prickly spines to protect themselves from predators. This process is
called convergent evolution, where similar characteristics evolved in species of different
lineages.
Activity C: Get the Gizmo ready:

Molecular ● Select the ORGANISMS tab, Plants, and

cladograms Molecular data.

Introduction: The creation of cladograms has been improved with the advent of protein and
DNA sequencing. A protein is a sequence of hundreds of amino acids. As organisms evolve,
some parts of these sequences may change as one amino acid is substituted for another.
Scientists can count these changes to try to reconstruct evolutionary relationships. In this
activity, you will use protein sequence data to create a cladogram.

Question: How do scientists use molecular data to construct cladograms?

1. Collect data: On the ORGANISMS tab, the amino acid sequences for the protein
cytochrome c oxidase in four plant species are listed. Select the top organism name on the
table. Compare the amino acids in that species to the amino acids in the other three
species. If an amino acid does NOT match the amino acid in the top row, click the box to
turn it orange. Mark all of the differences in the entire sequence as you scroll to the right.
Use this data to fill in the table on the TABLE tab.

Press Reset. Select the organism in the second row. Compare the amino acids in this
organism to the other two below. Fill in the table. Continue this process until the table is
complete. Select Check table to make sure the table was filled in correctly.

2. Organize: Look at your table.

A. Which two organisms have the fewest differences? Arabidopsis

Use the arrows to the right of the table to drag those two species to the bottom rows.

B. Which organism is most similar to the two organisms in part A above? Moss and
Cyad

Drag this organism to the second row of the table.

2018
 C. Which organism is the most different compared to the other three? Algae

This organism should be positioned at the top of the table.

3. Build: Select the ORGANISMS tab. If you have organized the table correctly, the species
should be organized from least-related on the left to most-related on the right.

Build a cladogram as you did

when Morphological was
selected. Draw it in the space
provided on the right.

(Activity C continued on next page)

2018
Activity C (continued from previous page)

4. Score: Select Parsimony score and Best possible parsimony score. Did you create the

best possible cladogram? If so, take a snapshot and add it to your document.

5. Organize data: Select Primates. Turn on the Show differences check box and select the
top organism in the table. This will automatically highlight the differences between the other
organisms and the one selected, which will allow you to complete the table more quickly.

Fill in the table. Which two species have the fewest differences? Human and chimp

Drag those two species to the bottom two rows. Of the remaining four species, use the right-
most row of the table to order the species from fewest differences at the bottom to most
differences at the top.

6. Build: Build a primates cladogram with the best possible parsimony score. Take a picture of
the cladogram and add it to your document. Select Show accepted cladogram.

Does your cladogram match the accepted cladogram? yes

The woolly and howler monkeys are very different from the human and chimp, so they
appear at the other side of the cladogram, but they are very similar to each other so they
likely share a more recent common ancestor. (Both woolly and howler monkeys are “New
World” monkeys native to South America.)

7. Build: Using the same method, create a molecular cladogram for the animals group. When
you are done, take a snapshot and save it in your document.

8. Compare: Compare the molecular cladograms for plants, primates, and animals to the
morphological cladograms. Do these cladograms match? Explain.

2018
9. Discuss: How does the molecular data help reinforce the evolutionary relationships you

inferred from the morphological data? Molecular data shows which organisms have the

same ancestors

Get the Gizmo ready:

Activity D:
● Select Artyodactyla and Morphological data.
Rewriting history
● Select the ORGANISMS tab.

Introduction: In some cases, molecular data can give insight into relatedness that
morphological data cannot. That was true for the Artiodactyla, a group of even toed mammals.

Question: Can molecular data to create cladograms that are more accurate?

1. Form a hypothesis: Which data type, morphological or molecular, do you think will allow you

to create a more accurate cladogram? Explain. Both data types should be used to make a

more accurate cladogram because you get to view all perspectives.

2. Build: Create the best possible cladogram using the morphological data. Paste a picture of
the cladogram in your separate document.

A. Based on this cladogram, which organism is most closely related to cow and deer?

Why? A pig because they both have 4 legs and 2 ears

B. Which organism shares the fewest traits with the others? The whale

3. Build: Switch to the Molecular data type. Notice that the molecular data used here are
SNPs, or single-nucleotide polymorphisms. A SNP is a difference in a nucleotide in a
specific location of an organisms DNA that varies among individuals. Create the best
possible cladogram. Paste a picture of the cladogram in your separate document.

A. Is this cladogram the same as the molecular cladogram? No

B. How do the two cladograms differ? The order of the organisms are different

2018
4. Compare: Select Show accepted cladogram. Do either of your cladograms match the

accepted cladogram? Yes

(Activity D continued on next page)

Activity D (continued from previous page)

5. Discuss: Where does the whale appear in the molecular cladogram? Is that surprising?
The whale appears to be 3rd animal and it is surprising because all the animals aside
from the whale all live on land and have 4 legs

Until recently, scientists used a cladogram based on morphological characteristics similar to

the one you created. A parsimonious morphological cladogram can be created if you
assume that selenodont teeth and three-part stomachs evolved only once.

This is not, however, consistent with the molecular data. Based on this data, whales and
hippos are related. Camels are distantly related to the other artiodactyls and must have
evolved multi-part stomachs and selenodont teeth independently. While it is based on a
wealth of molecular data, this new view of Artiodactyla is still new and somewhat
controversial.

6. Create: Select Insects for the Organism group and Molecular for the Data type. As you
have done previously, use the Gizmo to create a parsimonious cladogram.

Is your cladogram equivalent to the accepted cladogram? No

In this case, it is ok if your cladogram does not match the accepted cladogram. This Gizmo
uses small numbers of characteristics and short molecular sequences to allow for
manageable data analysis. In this case, the limited amount of molecular data is not enough
to sort out a relationship between the different insect groups.

Scientists must consider many traits and large molecular data sets to create an accurate
picture of evolutionary history. They also must weigh the significance of major evolutionary
changes, like skeleton development, versus less significant changes, like skin color.

7. Discuss: Are molecular or morphological data more useful when creating cladograms?

Explain. I think molecular data is more useful because the whole purpose of a cladogram is

to show the ancestors and that is what the molecular data displays, where as for

morphological, it’s only focused on the physical characteristics

8. Think and discuss: What can a scientist do to improve the accuracy of their cladogram?
Im not sure what they can specifically do but i think they can collect more data to help
show the data

2018