Nokia 7705 Service Aggregation Router

Adapter cards

As communications networks and applications migrate to IP/MPLS and Ethernet

infrastructures, many mission-critical and enterprise networks still have operational systems
that rely on serial data and analog voice interfaces that must be supported. The network
interfaces used in PDH and SONET/SDH networks (T1/E1, T3 and OC-n/STM-n) will remain
in use for many years as networks transition to packet.
The Nokia 7705 Service Aggregation Router (SAR) supports a broad range of data and voice
interfaces, allowing networks to be upgraded to IP/MPLS for advanced services delivery,
while maintaining support for existing operational systems.
Cards are available with a variety of options including power, conformal coating and
hardware-based encryption support.

Features and benefits

• Support for legacy and advanced services is provided
over a single network with extensive network and service
management capabilities.
• Legacy network interfaces simplify the transition from TDM-
based PDH/SONET/SDH network infrastructures to IP/MPLS.
• Legacy voice and serial data interfaces integrated within the
7705 SAR system eliminate the need for a separate T1/E1
channel bank or multiplexer, providing capital and operational
cost savings.
• Service interworking with IP, Frame Relay and High-Level Data
Link Control (HDLC) pseudowires provides flexibility, as well
as bandwidth and cost optimization for serial data interfaces. 7705 SAR-18
• Nokia’s patented Asymmetrical Delay Control (ADC) feature is
used by electrical utilities to manage packet network asymmetry
for proper operation of current differential teleprotection relays.
• The Nokia Network Services Platform (NSP) provides 7705 SAR-8
industry-leading network and service management for
lower operational costs.
• Service Portal Express enables automatic controlled
work order process and comprehensive report generation.

1 Data sheet
Nokia 7705 SAR - Adapter cards
Ethernet Legacy network
Ethernet cards provide 10/100 Mb/s, GE and 10GE Existing services can be transported over a new
interfaces and support ring, tree and point-to-point IP/MPLS network using the 7705 SAR-8/18 legacy
deployments. Both optical and electrical SFPs network interface cards. Alternatively, these legacy
are supported. network interface cards can be used to deliver
new IP/MPLS services while using an existing PDH/
10-port 10GE/GE X-Adapter SONET/SDH backbone for transport. They support
TDM, ATM, Frame Relay, HDLC, as well as IP services.

T1/E1 ASAP
This card can be used in the 7705 SAR-18 only.
It is user-configurable for either 1 x 10GE or
10 x 10/100/1000 Mb/s, with optical and electrical 16-port T1/E1 ASAP
transceivers supported. It features optional
hardware-based encryption.

6-port 10GE/GE
32-port T1/E1 ASAP
The T1/E1 Any Service Any Port (ASAP) cards provide
standard T1/E1 ports capable of carrying multiple
This card is equipped with two SFP+ ports and four service types over IP/MPLS, as well as existing TDM
SFP ports. All ports support both optical and electrical networks.
components. The SFP+ ports support 10 Gb/s. The • 16-port or 32-port variants
SFP ports support 10/100/1000 Mb/s. It features
optional hardware-based encryption. • DIN-connector access with optional RJ-45
and BNC panels
8-port GE • Synchronization options – loop, node, adaptive clock
recovery (ACR)/Differential clock recovery (DCR)
• -48/+24 V DC
This card is equipped with eight ports supporting • MPLS pseudowire support:
10/100/1000 Mb/s Ethernet optical or electrical - TDM circuit emulation (Cpipe/Epipe)
SFPs. OC-3/STM-1 Transparent SONET/SDH over - Circuit Emulation Service over Packet-Switched
Packet (TSoP) SFPs are supported. It features Network (CESoPSN)
optional hardware-based encryption.
- Structure Agnostic TDM over Packet (SAToP)
- Metro Ethernet Forum (MEF) 8 to 64 kb/s level
- Frame Relay (Fpipe)
– HDLC (Hpipe)
- IP (Ipipe)
• IP services

2 Data sheet
Nokia 7705 SAR - Adapter cards
4-port DS3/E3 • -48/+24V DC
• 2-port OC-3/STM-1 channelized card
- T1/E1 ATM/Inverse Multiplexing over ATM
(IMA) (access)
The DS3/E3 card provides standard DS3/E3 ports
capable of carrying multiple service types over - TDM at the T3, T1/E1, 64 kb/s levels
IP/MPLS, as well as existing TDM networks. - PPP/MLPPP
• 4 ports - Automatic protection switching (APS)/
Multi-chassis APS (MC-APS) (TDM)
• Configurable DS3 or E3 operation
• 4-port OC-3/STM-1 clear channel card
• Access or network links - ATM (access)
• Point-to-point Protocol (PPP) for network links - PoS (network)
• Loop or node timing • 4-port OC-3/STM-1 or 1-port OC-12/STM-4 card
• 1.0/2.3 coax connector access - Configurable as 4-port OC-3/STM-1 or 1-port
• -48/-60 V DC OC-12/STM-4
• MPLS pseudowire support: - Channelized to T1/E1 with DCR for access
or MLPPP for network applications
– TDM circuit emulation (Cpipe/Epipe)
- Clear channel PoS for network links
– CESoPSN, SAToP, MEF 8 to 64 kb/s level
- APS/MC-APS for TDM services, APS for PoS
– Frame Relay (Fpipe)
– HDLC (Hpipe)
– IP (Ipipe)
Serial data and voice
12-port Serial Data Interface (SDI) (v3)
SONET/SDH

2-port OC-3/STM-1 channelized The SDI card provides 12 serial data ports
configurable as RS-232, V.35, X.21 or RS-530/RS-422
interfaces, permitting transport of legacy services
over an IP/MPLS network. Cables connect the SDI
4-port OC-3/STM1 clear channel card to interface-specific panels for connector access.
• Typical applications for the SDI card include
SCADA (RS-232, X.21), electrical utility
teleprotection (RS-232, X.21), serial data
4-port OC-3/STM-1 or 1-port OC-12/STM-4 encryption network interconnect (RS-232,
This family of SONET/SDH cards provides TDM, RS-530) and remote router backhaul (V.35).
ATM, Packet over SONET (PoS), and PPP/Multi-Link • Separate distribution panels/cables for
PPP (MLPPP) services. port access:
• Configurable SONET or SDH operation - RS-232 – DB-25 connectors
• SFP interface - V.35 – M34 connectors
• Network links with MLPPP (n x DS1/E1) - X.21 – DB-15 connectors
- RS-530/RS-422 - DB-25 connectors
• Loop or node timing

3 Data sheet
Nokia 7705 SAR - Adapter cards
• Selectable data terminal equipment (DTE)/data - Transparent mode (Tr) for n x 64 kb/s TDM
circuit-terminating equipment (DCE) operation traffic. This can be as standard TDM traffic
• Multiple options for transporting serial data: or an IP/Frame Relay or HDLC pseudowire.
- High Capacity Multiplexing (HCM) for TDM - Raw Sockets (RS) for transport of asynchronous
transport of sub-rate data within a 64 kb/s RS-232 data as an IP service
timeslot (CESoPSN) - Serial SAToP (SS) for transport of additional
speeds as well as supporting serial DCR

Table 1. SDIv3 interface speeds/transport options

SDI v3
Speed (kb/s) RS-232 V.35 X.21 RS-530
Sync Async Sync Sync Async Sync Async
0.6 HCM, SS HCM, RS HCM, SS HCM
1.2 HCM, SS HCM, RS HCM HCM HCM, SS HCM
2.4 HCM, SS HCM, RS HCM HCM HCM, SS HCM
4.8 HCM, SS HCM, RS HCM HCM HCM, SS HCM
8 HCM, SS HCM, SS
9.6 HCM, SS HCM, RS HCM HCM HCM, SS HCM
14.4 HCM, SS HCM, SS
16 HCM, SS HCM, SS
19.2 HCM, SS HCM, RS HCM HCM HCM, SS HCM
24 HCM, SS
32 HCM, SS HCM, SS
38.4 HCM, SS HCM, RS HCM HCM HCM, SS HCM
56 HCM, SS TR HCM HCM, SS
57.6 RS
64 TR, SS TR TR TR, SS
115.2 RS
128 TR TR TR, SS
192 TR TR, SS
256 TR TR TR, SS
288 TR, SS
336 TR, SS
384 TR TR TR, SS
512 TR TR TR, SS
640 TR TR TR, SS
704 TR, SS
768 TR TR TR, SS
896 TR TR TR, SS
1024 TR TR TR, SS
1152 TR TR TR, SS
1280 TR TR TR, SS
1344 TR TR, SS
1408 TR TR TR, SS

4 Data sheet
Nokia 7705 SAR - Adapter cards
 SDI v3
Speed (kb/s) RS-232 V.35 X.21 RS-530
Sync Async Sync Sync Async Sync Async
1536 TR TR TR, SS
1664 TR TR TR, SS
1792 TR TR TR, SS
1920 TR TR TR, SS
2048 TR TR TR, SS
4096, 5120, 7168 TR
3072 - 16384 every 1024 kb/s SS

• MPLS pseudowire support: • Six ports

- CESoPSN/SAToP (Cpipe) • 2-wire or 4-wire operation
- Frame Relay (Fpipe) – V.35, X.21, RS-530/ • 600Ω impedance
RS-422 n x 64 kb/s only • Selectable μ-law or A-law companding for
- HDLC (Hpipe) – V.35, X.21, RS-530/ worldwide use
RS-422 n x 64 kb/s only • E&M signaling Type I, Type II, and Type V supported
- IP (Ipipe) – V.35, X.21, RS-530/R
• ABCD signaling bit support: Option for no
S-422 n x 64 kb/s only
signaling for transmission-only applications
• Multiple timing/synchronization options:
• Multiple multi-frame option minimizes network
–
Asynchronous bandwidth utilization
–
Synchronous • Designed for short reach, on-premise use
-
Slave (200Ω maximum loop length)
-
External • RJ-45 connector access on faceplate
-
Terminal Timing • PCM multi-drop SCADA and voice conference
–
Serial DCR to provide serial timing across bridging support using the Integrated Services Card
MPLS networks • -48 V DC
• RS-232, X.21 and RS-530/RS-422 MDDB SCADA
support using the 7705 Integrated Services Card 8-port C37.94 teleprotection
• -48 V DC/+24 V DC
6-port E&M
The 8-port C37.94 teleprotection card provides up
to eight multimode fiber (MMF) or single-mode fiber
(SMF) optical interfaces to connect TDM teleprotection
relays across an electrical utility’s IP/MPLS network
The E&M card provides six analog interfaces that using CESoPSN TDM pseudowires (Cpipes).
are used to deliver capabilities, such as SCADA,
tone-based teleprotection, and Land Mobile Radio • Compliant with IEEE C37.94-2017
(LMR) base station backhaul. The E&M card utilizes • n x 64 kb/s optical interface
CESoPSN TDM pseudowires (Cpipes) for transport • 50/62.5 micron MMF
across the IP/MPLS network.

5 Data sheet
Nokia 7705 SAR - Adapter cards
• SMF or MMF SFP ports • Designed for short-reach, on-premise use
• LC optical connectors (ST connectors via (200Ω maximum loop length)
adapter cable) • RJ-45 connector access (two FXS or FXO ports/
• Low latency for teleprotection applications connector)
• -48 V/+24 V DC G.703 co-directional features:
Distance: • Single 64-kb/s channel over G.703 bi-polar
encoded signal
• Short reach: 2 km (9/13 dB link budget)
• 4-wire physical interface
• Long reach: 20 km (13 dB link budget)
• Low-latency capability for teleprotection
8-port Voice and Teleprotection (VT) applications
• RJ-45 connector access
C37.94 Optical TPIF features:
The VT card is a multipurpose device with several • Compliant with IEEE C37.94
interfaces for applications that require analog voice • n x 64 kb/s optical interface
and specific digital interfaces needed for electrical • 50/62.5 micron MMF
utility teleprotection applications. All interfaces utilize
CESoPSN TDM pseudowires for transport across the • 2-km reach (9/13 dB link budget)
MPLS network. The physical interfaces are: • ST optical connectors
• 2-port Foreign eXchange – Subscriber (FXS) • Low latency for teleprotection applications
for connection to telephone sets
8-port FXO
• 2-port Foreign eXchange – Office (FXO) for
connection to the central office/PBX
• 2-port ITU-T G.703 co-directional 64 kb/s digital
interface for teleprotection relay interconnect The FXO card provides eight FXO interfaces for
• 2-port IEEE C37.94 Optical Teleprotection high-density connection to a central PBX/switch.
Interface (TPIF) The FXO card utilizes CESoPSN TDM pseudowires
(Cpipes) for transport across the IP/MPLS network.
• -48 V/+24 V DC
FXS/FXO features: • 600Ω impedance
• Selectable μ-law or A-law companding for
• 600Ω impedance
worldwide use
• Selectable μ-law or A-law companding for
• LS signaling
worldwide use
• ITU-T G.712 transmission performance
• Loop Start (LS) signaling for Off-Premises
eXtension (OPX) applications and Private Line • Programmable TLPs
Automatic Ringdown (PLAR) signaling (FXS-only) • Designed for short-reach, on-premise use
for direct site-to-site hot-line options (200Ω maximum loop length)
• On-card ringing support with multiple frequency • RJ-45 connector access (two FXS ports/
options (FXS) connector)
• ITU-T G.712 transmission performance • -48 V/+24 V DC
• Programmable Transmission Level Points (TLPs)

6 Data sheet
Nokia 7705 SAR - Adapter cards
6-port FXS
Other cards
GNSS Receiver

The FXS card provides six FXS interfaces for high-

density connection to remote telephone sets (OPX).
The FXS card utilizes CESoPSN TDM pseudowires The GNSS Receiver card provides frequency, time of
(Cpipes) for transport across the IP/ MPLS network. day, phase and location allowing 7705 SAR routers
• 600Ω impedance to act as IEEE 1588v2 grandmasters. Both GPS and
Global Navigation Satellite System (GLONASS) are
• Selectable μ-law or A-law companding for supported.
worldwide use
• LS and PLAR signaling Auxiliary Alarm
• ITU-T G.712 transmission performance
• Programmable TLPs
• Designed for short-reach, on-premise use The Auxiliary Alarm card provides alarm relays for
(200Ω maximum loop length) security, telecommunications, and building systems,
• RJ-45 connector access (two FXS ports/connector) triggering local visual or audible alarms on external
alarm equipment and monitoring DC battery levels.
• -48 V/+24 V DC
- Uses a single 68-pin AMP (SCSI-2 form factor)
Integrated Services Card (ISC) connector
- 24 dry contact alarm inputs for security
(door/window), HVAC and telecom systems
- 8 dry contact alarm outputs to external
Applications running on the ISC card allow legacy audible/visual/telecom equipment
TDM SCADA applications to be carried over an - 2 analog inputs provide voltage reading from
IP/MPLS network, deferring the need to upgrade 0 to 75V. These are ideal for backup battery
the application to IP. These applications provide monitoring.
the ability for the SCADA master to broadcast to
multiple remote terminal units (RTUs) and only - Alarm control and status are accessible on the
receive data from an active RTU. Support for 7705 SAR-8 using CLI commands, or remotely
redundant SCADA masters is provided (manual using the NSP.
and automatic switchover). - Ultra-wide support of -48 V/-60 V DC and
+24 V DC power on the 7705 SAR-8 and
Applications supported on the ISC are:
-48 V/-60 V DC on the 7705 SAR-18.
• MDDB: MDDB allows a central SCADA master to
communicate with multiple RTUs using RS-232 Packet Microwave
serial links.
• PCM multidrop bridging: PCM bridging is the same
as MDDB except the RTUs use 4-wire E&M analog
The 7705 SAR microwave awareness (MWA) capability
modems at the RTUs.
allows subtending microwave systems to be managed
• Voice Conference Bridging (VCB): 64-kb/s PCM as a part of a 7705 SAR system with a single IP
voice conference bridging for LMR backhaul, address. It also provides enhanced end-to-end
multi-terminal teleprotection and maintenance Ethernet and reliability features. The packet microwave
bridges. Requires 4W analog inputs.

7 Data sheet
Nokia 7705 SAR - Adapter cards
adapter card supports the MWA capability on ports
1-4 and IP/MPLS networking on all eight ports. All ports Physical specifications
provide 10/100/1000 Mb/s, but when connecting to
an MPR-e radio they are always in GE mode. It has
(all cards)
2 x RJ-45 and 6 x SFP ports. The card supports an Adapter cards can be inserted into any one of the
ultra-wide power range of –48 V/ –60 V DC to +24 V DC. six adapter card slots in the 7705 SAR-8, or in any
one of the 12 adapter card slots on the right-hand
Microwave Power Injector side of the 7705 SAR-18. The X-Adapter card can be
inserted into one of the four card slots on the left-
hand side of the 7705 SAR-18.

The Microwave Power Injector card delivers power Dimensions and weight
and data or power only to an MPR-e radio. The card Adapter cards
draws its power from the backplane of a 7705 SAR
• Height: 17.0 cm (6.7 in)
chassis and provides p ower feed redundancy when
it is provisioned on the chassis. The card operates at • Width: 2.29 cm (0.9 in)
-48 VDC ± 20%. • Depth: 22.0 cm (8.7 in)
The faceplate has two sets of RJ-45 electrical • Weight: 0.38 kg (0.86 lb)
connectors labelled Data and DC+Data. The Data
X-Adapter card
connector can connect to the following ports in
order to receive data: • Height: 26 cm (10.2 in)
• a copper SFP or RJ-45 port on a Packet • Width: 2.9 cm (1.1 in)
Microwave Adapter card • Depth: 23.3 cm (9.2 in)
• a copper SFP port on an 8-port Ethernet Adapter • Weight: 0.72 – 0.74 kg (1.6 – 1.63 lb)
card v2
• a copper SFP port on an 8-port Gigabit Ethernet Temperature range
Adapter card (v1 and v2) • Operating temperature: -40°C to 65°C
The DC+Data connector takes that data and transmits (-40°F to 149°F)
it along with DC power to an MPR-e radio.

8 Data sheet
Nokia 7705 SAR - Adapter cards
Ordering information
Part number Part name Description
3HE06153AA 1-port 10GE/10-port 1GE X-Adapter Used in 7705 SAR-18 only
3HE06153AC 1-port 10GE/10-port 1GE X-Adapter User-configurable to support 1 x 10GE or 10 x 1GE
IPsec-capable 1 x SFP+ 10GE
10 x SFP 10/100/1000 Mb/s
Optical or electrical
3HE07943AA 6-port 10GE, GE IPsec-capable 2 x SFP+ 10 Gb/s and 4 x SFP 10/100/1000 Mb/s
3HE07943BA 6-port 10GE, GE IPsec-capable with conformal Optical or electrical, Hardware-based encryption
coating
3HE12433AA 6-port 10GE, GE 2 x SFP+ 10 Gb/s and 4 x SFP 10/100/1000 Mb/s
3HE12433BA 6-port 10GE, GE with conformal coating Optical or electrical
3HE06151AA 8-port GE SFP v1 (-48 V/+24 V DC) 8 x SFP 10/100/1000 Mb/s
3HE06151AC 8-port GE SFP v3 IPsec-capable, large tables Optical or electrical
3HE06151BA 8-port GE SFP v1 (-48 V/+24 V DC) OC-3/STM-1 TSoP SFPs are supported
with conformal coating
3HE06151BC 8-port GE SFP v3 IPsec-capable, large tables,
with conformal coating
3HE02775AB 16-port T1/E1 ASAP v2 (-48 V/+24 V DC) 16 T1 or E1 ports capable of providing TDM, IP, ATM, Frame Relay
3HE02775CB 16-port T1/E1 ASAP v2 (-48 V/+24 V DC) and HDLC transport
with conformal coating
3HE02781AA 32-port T1/E1 ASAP v2 (-48 V/+24 V DC) 32 T1 or E1 ports capable of providing TDM, IP, ATM, Frame Relay
and HDLC transport
3HE04962AB 4-port DS3/E3 v2 (-48/-60 V DC) Four-port DS3 or E3, clear channel and channelized (on DS3 only)
TDM, FR, PPP and ATM service (on DS3 only)
3HE03127AA 2-port OC-3/STM-1 channelized Two OC-3/STM-1 selectable ports providing TDM transport
3HE03127BA 2-port OC-3/STM-1 channelized channelized to the 64 kb/s level
with conformal coating
3HE03125AA 4-port OC-3/STM-1 PoS/ATM Four clear-channel OC-3/STM-1 selectable ports capable of
3HE03125BA 4-port OC-3c/STM-1c PoS/ATM with conformal providing packet over SONET/SDH (PoS) network links or ATM
coating access
3HE07938AA 4-port OC-3/STM-1, 1-port OC-12/STM-4 Four OC-3/STM-1 or one OC-12/STM-4 ports
3HE03391AC 12-port Serial Data Interface v3 (SDIv3) 12 serial ports can be configured as RS-232, V.35, X.21, and
3HE03391BC 12-port Serial Data Interface v3 (SDIv3) RS-422/RS-530 interfaces for TDM, FR, HDLC and IP (TDM-only
with conformal coating for RS-232) with additional speeds, synchronization functionality,
and maintenance capability
3HE03126AA 6-port E&M Six analog interfaces used to deliver capabilities such as SCADA,
3HE03126BA 6-port E&M with conformal coating tone-based teleprotection, Land Mobile Radio (LMR) base-station
backhaul
3HE12504AA 8-port C37.94 teleprotection Eight C37.94-compliant SMF or MMF LC SFP ports for electrical
utility teleprotection applications.
3HE06006AA 8-port Voice and Teleprotection (VT) A multipurpose device with a number of interfaces for applications
that require analog voice and specific digital interfaces needed for
3HE06006BA 8-port VT with conformal coating electrical utility teleprotection applications
3HE06794AA 8-port FXO Eight analog FXO interfaces to a central PBX
3HE06794BA 8-port FXO with conformal coat
3HE02780AA 6-port FXS Six analog FXS subscriber interfaces from local telephone set
3HE02780BA 6-port FXS with conformal coating

9 Data sheet
Nokia 7705 SAR - Adapter cards
 Part number Part name Description
3HE07942AA Integrated Services Application resource card providing serial Multi-Drop Data Bridging
(MDDB), analog PCM multidrop and voice conference bridging
capabilities
3HE07954AA GNSS Receiver One x RF, receives frequency and time from a GNSS antenna
3HE02772AA Auxiliary Alarm (-48 V/+24 V DC) 24 digital alarm inputs, 2 analog inputs and 8 output relays
3HE02772BA Auxiliary Alarm (-48 V/+24 V DC)
with conformal coating
3HE02782AA Packet Microwave interface Interface to Nokia Wavence microwave transport supporting the
3HE02782BA Packet Microwave interface with conformal coating microwave awareness capability. Eight Ethernet ports support
10/100/1000 Mb/s.
3HE07152AA Microwave Power Injector Two pairs of RJ-45 ports supply power and data or power alone to
Nokia Wavence microwave platforms

About Nokia
At Nokia, we create technology that helps the world act together.

As a B2B technology innovation leader, we are pioneering networks that sense, think and act by leveraging our work across mobile, fixed and cloud networks. In addition,
we create value with intellectual property and long-term research, led by the award-winning Nokia Bell Labs.

Service providers, enterprises and partners worldwide trust Nokia to deliver secure, reliable and sustainable networks today – and work with us to create the digital
services and applications of the future.

Nokia operates a policy of ongoing development and has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors
and omissions. Nokia assumes no responsibility for any inaccuracies in this document and reserves the right to change, modify, transfer, or otherwise revise this publication
without notice.

© 2023 Nokia

Nokia OYJ
Karakaari 7
02610 Espoo
Finland
Tel. +358 (0) 10 44 88 000

Document code: (April) CID174425