0% found this document useful (0 votes)
320 views17 pages

Company Profile

This document provides a company profile for Bahra Electric, also known as Bahra Cables Company. It was established in 2008 as a joint venture between CPC and Electric House to serve Saudi, GCC, and international markets. Bahra Electric operates over 500,000 square meters of manufacturing land and produces a wide range of electrical equipment, including wires and cables, conduits, busbars, load centers, circuit breakers, wiring devices, enclosures, switchgear, and cable management systems. The company uses cutting-edge European technology and sources key materials and expertise from global leaders to produce high-quality electrical products.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
320 views17 pages

Company Profile

This document provides a company profile for Bahra Electric, also known as Bahra Cables Company. It was established in 2008 as a joint venture between CPC and Electric House to serve Saudi, GCC, and international markets. Bahra Electric operates over 500,000 square meters of manufacturing land and produces a wide range of electrical equipment, including wires and cables, conduits, busbars, load centers, circuit breakers, wiring devices, enclosures, switchgear, and cable management systems. The company uses cutting-edge European technology and sources key materials and expertise from global leaders to produce high-quality electrical products.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

Company Profile

CONTENTS

INTRODUCTION - P1
RANGE OF PRODUCTS
WIRES&CABLES - P3
CONDUITS - P5
BUSBARS - P7
LOAD CENTERS - P9
CIRCUIT BREAKERS - P10
WIRING DEVICES - P11
ENCLOSURES - P12
SWITCHGEAR - P13
EARTHING & LIGHTNING PROTECTION - P15
CABLE MANAGEMENT SYSTEM - P17
BAHRA ALUMINUM - P19
TRANSFORMERS & BUSWAYS - P21
APPROVALS & CERTIFICATES - P23
EXPORT COUNTRIES - P25
LOCATION MAP
INTRODUCTION ABOUT US
BAHRA ELECTRIC • Founded in 2008
Also known as Bahra Cables Company was established in 2008 to serve Saudi, • Joint Venture between CPC (Construction Products Holding Company) and
GCC & International Markets. It is based in Bahra industrial city located 35km
from Jeddah. Bahra Cables Factory occupies over 500,000 square meters of Electric House
prime manufacturing space together with associated design offices, • Company spans over 500,000 sqm of manufacturing land:
laboratories and storage area. It specializes in Manufacturing and Distributing Zone Area
Electrical Equipments.
Production: 92,000
Bahra Cables Company is committed to the production of the best product -Cables 80,000
quality and service and therefore uses cutting edge European Technology in -PVC Compound 8,000
manufacturing as all of the machines were brought from Europe and Asia. The -BusBar 4,000
core technologies in production processes, material applications and logistic Testing 7,000
procedures were provided by German experts and the key functions are being
Warehouses 24,000
managed by German engineers.
Drum Yard 75,000
The organization has a lean vertical management structure which is designed Offices 2,000
to integrate with a highly developed IT-based structure. This partnership allows Total Occupied area 300,000
the rapid flow of information through the management chain and facilitates Future Expansion 200,000
timely response in the best traditions of ‘hands on’ management.
• Operates its own PVC Compound Plant as part of its Vertical Integration
Bahra Cables Company has the flexibility to provide a versatile product range
(Annual Production Capacity: 36,000 Tons)
to serve the construction, electric utilities, distribution, industrial, oil & gas and
petrochemical sectors. The cables produced comply with both American • Bahra Cables is the first cable manufacturer in Saudi Arabia gets
standards (CSA, ANSI, ICEA and UL ) and European standards ( IEC, BS, NF ISO 14001:2004, and OHSAS 18001:2007
and VDE specifications). • Bahra Cables Lab is accredited according to ISO/IEC 17025:2005 for a
www.bahra-cables.com complete type test range.
• State-of-the-art European machinery and ERP systems.
• Available at more than 500 outlets, throughout the Kingdom.
1 2 2
WIRES and
CABLES

BARE COPPER

BARE TINNED COPPER

HIGH VOLTAGE

www.bahra-cables.com www.bahra-cables.com
3 4
CONDUIT
The new factory also
eliminates the need for local
sourcing of PVC compounds,
According to IEC, British, European, American, Saudi & Gulf Standard.
ensures superior quality
BC Conduit has started production of a variety of high quality production of Conduit &
UPVC - UnPlasticized Polyvinyl chloride compounds in its state-of-the-art Fittings and creates more
factory in Bahra, which has an annual output capacity of over 36,000 tons. career opportunities in the
region at the same time.
The company sources PVC & UPVC feedstock for the new factory from Saudi
Basic Industries Corporation (SABIC) to produce the granule used for
AVAILABLE ALL CONDUIT AND FITTING ACCORDING BELOW STANDARDS
jacketing and insulating the cables. SABIC is one of the world’s largest
IEC60423, IEC 61386-1 & 21, IEC 60670-1
manufacturers of PVC & UPVC and the sole producer in Saudi Arabia.
NEMA TC2, TC3, TC6, TC8 & TC9 & UL 651
The factory built with the expertise of Buss Company of Switzerland, SASO 14/15 - DIN 8061/8062
is completely integrated and equipped with the latest technologies in GS 32/33 - 2007
the field.

Bahra Conduit achieved Industrial Design


The ability to manufacture PVC & UPVC compounds improves Certification for its innovation product “Telescopic
BCC’s control over the material used in its cable and wire Double Tube Expansion Coupling” by King
production, reduces product cost and adds higher performance Abdulaziz City for Science & Technology (KACST)
values to its products. with patent rights.

www.bahra-cables.com www.bahra-cables.com
5 6
BUSBARS
5107
Ref. 1602-B

Bahra Round Rods can be in the diameter range of:


Bahra Busbars has started production of a variety of high conductivity copper busbars, rods and earthing tape. 1. Diameter from 6 mm up to 70 mm.
The company sources of Copper from international LME registered companies. 2. Cross section area: from 30 mm2 up to 3800 mm2.
The factory built with the european expertise, is completely integrated and equipped with the latest Bahra Copper tape can be in the range of dimensions as:
technologies in the field. 1. Thickness: from 3 mm up to 5 mm.
The new factory also eliminates the need for local sourcing of copper busbars, ensures superior quality 2. Width: minimum 10 mm.
production and creates more career opportunities in the region at the same time. 3. Cross section area: from 30 mm2 up to 3400 mm2.
Bahra Copper Tape type tested for Lighting Protection at Labelec

Bahra Busbars can be in the range of dimensions as described below:


Width: from 10mm up to 240mm.
Thickness: from 2mm up to 24mm.
Cross section area: from 30 mm2 up to 3800mm2.

TINNED COPPER BUSBARS


PROPERTIES Tinned busbars are manufactured by state-of-the-art Electrolytic Tinning process,
The raw materials are pure copper cathodes grade "A" with copper purity of 99.99%. This allows our high quality copper using a computerized system, which provides the best quality of tinned
busbars to be used in Electrical Panels, Switchgears and Transformers.
bus bar and rods to meet International Standards. TYPES OF EDGES
SPECIFICATIONS
1. Volume Resistivity at 20°C/ 68°F 1.7241-1.7070 Ωmm2/m Sharp Edges
Coating thickness (default):
2. Volume Conductivity at 20°C/ 68°F 58.00-58.58 MS/m 6 microns (Special coating thickness can be obtained upon request)
3. Density 8.91 g/cm3 Radius Corners
Purity of coating material: Minimum 99.85%, as per ASTM B339
4. Melting Point 1083 °C Bahra labs are capabile of performing all required tests for tinned busbars, like;
5. Excellent Corrosion Resistance Full Round Edges • Tin thickness test
• Adhesion test
www.bahra-cables.com www.bahra-cables.com
7 8
LOAD
CENTER

SAFE, RELIABLE AND HIGH QUALITY CIRCUIT


BREAKERS

Bahra is a brand established in 2011 with a goal to develop a range of high quality USE OF EATON BREAKERS OF HIGH SPECIFICATION WITH HIGH
Load Centers for residential and industrial applications.
interrupting capacity secures the highest safety standards. It also increases durability and helps the product withstand
Innovation is a key component in all our products, as our mission is to be the safest electrical shocks. The use of the Circuit Breaker with Enclosure (CBE) provides your house with a double layer of
products in the market.
protection.
We promise our customers that we will continuously improve and develop our
products to meet the fundamental cornerstones of our product: SAFETY AND Bahra Circuit Breakers with Enclosure are powered with the best selection of international proven quality of breakers by
RELIABILITY. Eaton to provide reliable circuit protection against overload and short circuits.

Bahra Load Centers are used for safe and reliable distribution of electrical power for
indoor application in residential and commercial buildings. Bahra Load Centers are
powered by the best selection of international proven quality of breakers by Eaton to
provide reliable circuit protection against overload and short circuit.

DESIGNED TO SUIT IEC 2&1-61439


Bahra Load Centers are designed as per the latest IEC 2&1-61439 standards
(January 2012) and are tested as per this standard in highly reputed international

standards.

www.bahra-cables.com www.bahra-cables.com
9 10
WIRING
DEVICES

With our first wiring devices range we at Bahra have designed a range that is simple and flexible, solid and colorful,
over-engineered and unique in its features. We hope our products will awaken your senses to the multiple possibilities ENCLOSURES
available in in a wiring device and inspire you to speak your own language with our products.

IP65 ENCLOSURE | SINGLE / DOUBLE DOOR


OUT DOOR / INDOOR APPLICATION

APPLICATIONS
Bahra Enclosures are designed to accommodate various type of switchgear and controlgear assemblies suitable to all
SMALL ROCKER types of electrical installations especially for commercials and industrial sectors. They are designed for outdoor
applications up to IP-65.

SPECIFICATIONS
Made of high CR and GI steel sheet of thickness up to 1.2-1.5 mm Max.
Matt-finished polyester epoxy powder coated in RAL 7035 color.
Standard GI mounting plate with 2.0mm thickness with holes provision for
SWITCHED SOCKET earthing.
Double door for the width more than 800mm are composed of swing handle
with three point latch lock.

Corner formed door to insure better water protection and gives aesthetic look.
Perforated door stiffeners for more rigidity and for easy cabling and fixing accessories.
Special profiled enclosure lip for better liquid protections.
Complies with IEC60529 & IEC 62208 standards.
COMMUNICATION &
ELECTRONICS

www.bahra-cables.com www.bahra-cables.com
11 12
SWITCHGEAR

BAHRA Switchgear is a specialized manufacturer of Type Tested Low and Medium Voltage Switchboards.

Type Tested Low Voltage Switchboards are covering from 6300 Amp Power and Motor Control Centers with internal arc
and seismic withstand capabilities up to consumer units.

Type Tested Ring Main Units adapted for Saudi Electricity specifications for the
13.8 KV medium voltage distribution network.

Type tested metal cladded Medium Voltage Switchgears adapted for Saudi Electricity specifications for the 13.8 KV
medium voltage primary distribution, and industrial sites.

BAHRA Switchgears are securing After Sales and Services teams for emergencies and customers support.

www.bahra-cables.com www.bahra-cables.com
13 14
EARTHING
SYSTEMS
TESTED TO THE EXTREMES*
EARTHING AND LIGHTNING PROTECTION SYSTEMS
In salty environments
An earthing system is a need in any electrical system to protect from the adverse effects of lightning, Leakage currents,
insulation failures, short circuiting and other faults. A reliable earthing system with short, direct and low resistive path In sulphurous atmoshperes
ensures protecting people, equipment, structure and environment by dissipating fault currents that are of high With peak current of 100000 amperes
magnitude and impulsive rise times. IEC 62561, bs en 50164 tested
Tested for quality by bahra’s state of the art laboratory.
Earthing systems are designed as per the requirement of electrical systems and applications, though the principle
remains the same, conductors, devices, type of connections varies for different applications such as *Tested as per the latest stringent standards IEC 62561
power stations, overhead transmission systems, consumer power networks.
UL listed as per UL E499229 :
PRODUCT SUPPLIES - Product codes: CAB01 , AR01 , AR02 , BCT08 , CDC02 , CTC02 , CSTT02

SPECIAL FEATURES EARTH RODS & ACCESSORIES


CONDUCTORS •Highly Conductive Solid Copper Rods.
•Copper Tapes that are drawn from 99.99% Pure Copper Cathodes. •254 Microns Copper Bonded Rods with
•PVC Coated Copper Tapes with color options maintaining aesthetics. tough mechanical strength.
•Lead Coated Tapes for special applications. •Ease of Installtion.
•Anti-Corrosive Tin Plated variants.
•Radius Edges Ensuring Safety for Installers.

EXOTHERMIC WELDING
•Made from the optimum density Japanese graphite.
•New design with optimized mold life & Handling.
•Ergonomically designed for easier mold cleaning after every weld.

www.bahra-cables.com www.bahra-cables.com
15 16
CABLE
MANAGEMENT
SYSTEMS
Bahra Cables Management Systems (BCMS), with headquarters located in the industrial city of Bahra, is fast becoming BCMS manufacture and supply a whole range of Cable Management System including Cable Tray, Cable Trunks, Cable
one of the leading companies operating in the Kingdom of Saudi Arabia rapidly building a fine reputation for its quality Ladder, Support Channels complying with the most well-known International Standards such as “IEC 61537, NEMA
cables management systems products. 126.1-02 Standards for HDG as ASTM 123 or BS EN 1461”. Our Strategy for the purchase of raw material from many
The quality products and services it offers have made the company known and recognized highly by all its customers for sources in the Kingdom of Saudi Arabia and abroad. Coil material as per standard BS 2989.
their exceptional quality assurance, outstanding products and excellence in customer service.
The main markets serviced by BCMS are Saudi Arabia and the countries belonging to the Middle East and North Africa We have our own specification to provide customers the quality products and excellent service according to their
(MENA) Region. requirements with the following materials specification for special applications.

The company serves the needs of many industrial companies engaged in the field of real estate construction, electric BCMS Cable Support System is approved by the most of the Engineering design & Consulting Offices in the Kingdom and
utilities, transport, petro-chemical and marine industries, oil and gas, aero and shipbuilding industries, telecommunica- is being used for all kinds of Projects including mega size and land mark projects as indicated in our reference list. Our
tions, medical, automotive industries and supplies a wide selection of Cables management systems products and related commitment is to satisfy our clients with high standard products, prompt delivery and efficient services.
accessories to many distributors in the industrial sector domestically and in MENA Region.
The Cables Management Systems is a part of Bahra Advanced Cable Manufacture Co. Ltd. and Products complying with
most well-known international standards such as NEMA, IEC, for HDG as ASTM or BS EN.

www.bahra-cables.com www.bahra-cables.com
17 18
ALUMINUM

Bahra Aluminum produce Aluminum Rods and Aluminum Alloy Rods, they are widely used in production of conductor PRODUCTS:

for insulated power cables and overhead power transmission lines where the characteristics of aluminum are required.
Bahra Aluminum produce 9.5 mm continuously cast and rolled aluminum rod and aluminum alloy rod complying with
Aluminum Rod H12 used for insulated power cables has good conductivity, light weight and excellent compatibility with
ASTM Standards B233 and B398
most common insulation used by the wire and cable industry.
· H 12: Strain Hardened – ¼ Hard

Aluminum rod H14 and Aluminum Alloy 6201 used in Overhead Power Transmission Lines have good conductivity, light · H 14: Strain Hardened – ½ Hard
· Alloy 6201
weight excellent resistance to corrosion and excellent mechanical properties.

www.bahra-cables.com www.bahra-cables.com
19 20
TRANSFORMERS &
BUSWAYSSOLUTIONS

The power solutions for commercial and industrial sector applications


HIGH EFFICIENCY COMPACT BUSWAY
HIGH EFFICIENCY CAST RESIN FROM 800 TO 6300 A
TRANSFORMERS UP TO 5000 KVA The busway is the most modern solution for the distribution of
energy in an installation for machinery, equipment and lighting
Legrand high-quality cast resin transformer are the ideal fittings in all types of buildings.
choice for all needs thanks to their different advantages:

The busway is also frequently used to power the (horizontal and vertical) backbones of buildings used for the
commercial-service sectors, thus observing the time required for the installation and providing a final solution
• Total safety for the customer, guaranteed by the total absence of combustible products,
with remarkable technical advantages.
• Maximum environmental protection, thanks to the absence of polluting and flammable
insulating liquids.
• Energy saving, with the exclusive “reduced loss” range.
• Maximum flexibility straight from the beginning of the installation.

21 22
APPROVALS AND CERTIFICATES

EGYPT CONGO SUDAN LIBYA YEMEN IRAQ OMAN UAE LEBANON

Ref: 5310/6.910/826/16/JB

www.bahra-cables.com www.bahra-cables.com
23 24
EXPORT

United Kingdom Tunisia

Ivory Coast

Netherland Italy

DRC -Congo Congo Turkey South Korea

India Spain

Azerbaijan Mauritania Maldives Niger Philippines Eritrea South Sudan

www.bahra-cables.com
25 26

You might also like