1 2 3 4 5 6 7 8 9 10 11 12

NOTES:
Revision Schedule
PB27 PB26 PB17 PB16 PB7 PB6 No. Date Description Checked by Approved by
1. FOR GENERAL NOTES, REFER TO DRAWING NO.
IWMF1-13_133_300_120001 AND 120002. 0 19-NOV-2021 DDA SUBMISSION MH KY
1 08-APR-2022 DDA SUBMISSION MH KY
H PB32 PB31PB30PB29PB28 PB25PB24PB23PB22PB21PB20PB19PB18 PB15PB14PB13PB12PB11PB10 PB9 PB8 PB5 PB4 PB3 PB2 PB1 2. FOR TYPICAL DETAILS, REFER TO DRAWING NO. H
IWMF1_13-133_300_120101, 120111 AND 120121
SERIES.

3. THE STRUCTURAL PROVISION FOR THE CRANE

IN THIS DRAWING IS FOR INFORMATION ONLY.
IT SHALL BE REVIEWED IN CONJUCTION WITH
THE E&M DESIGN.

PBA 4. FOR CRANE TRACK TOLERANCE REQUIREMENT,

REFER TO DDA PACKAGE 2.3.16.01.02 MECHANICAL
WORKS DESIGN - WASTE CRANE AND GRAPPLE,
PBB DRAWING NO. IWMF1_43-211_250_000102.

BEAM MARK SIZE

Employer
RWB-01 UB914x419x388
PBC RWB-02 UB610x305x179
G G
RWB-03 UB914x305x201
RWB-04 UC254x254x107

1
PBD RWB-05 UC305x305x137
Supervising Officer
ST-01 UB305x127x42
ST-02 UB610x305x179

1
PBE
Main Contractor

PBF

PBG
F Designers F

PBH

PBJ Design Checker

1A
-

+38.100 WALKWAY ROOF LEVEL KEYPLAN ℄

E ℄ E
10 1201 340

3-M30 3-M30 BOLTS RC COLUMN

60 80 16mm THK. 60 110 110 60 Certification
BOLTS TIE PLATE
3-M30x250mm 60 60 RWB-01 3-M30
3 BOLTS 16mm THK. TIE PLATE
HEADED STUD ANCHORS 250 + 41.450 RWB-01 + 41.450
125632
75 25

8
200
25 75

500

8 12 12 12
L150x150x16

D
200x400x16mm THK
EMBED PLATE FOR MARKUP D
20mm THK. 20mm THK.
STIFFENER PLATES STIFFENER PLATES

6-M30x400mm
CAST-IN HEADED BOLTS
WITH NUT AND WASHER
RC COLUMN
500x500x30 2 500x500x30
BASE PLATE 125632 BASE PLATE
+ 40.499 + 40.499

30

30
C 6-M30x400mm C

400

400
CAST-IN HEADED BOLTS
WITH NUT AND WASHER

900

900
40 60 300 60 40 150 100 150 150 100 150

150 500 150

Project Name

Contract No. EP/SP/66/12

1700

1700
1650Lx800Wx1700D Integrated Waste Management Facilities
B
CORBEL TYPE A Phase 1 B
TL +40.499
REFER TO CORBEL
REINFORCEMENT FOR
Design Package
DETAILS
1650Lx800Wx1700D
2.3.14.01.01
CORBEL TYPE A
RC BEAM TL +40.499 PROCESS BUILDING VOL. 1 (BUNKER) &
REFER TO CORBEL 2.5.14 WASTEWATER TREATMENT PLAN
REINFORCEMENT FOR STRUCTURAL DESIGN
DETAILS
800

800
Drawing Title
800 PROCESS BUILDING - BUNKER
CRANE RUNWAY BEAM
CONNECTION DETAILS - TYPE A
SHEET 1 OF 2
UNDER SEPARATE SUBMISSION
A Drawing Number Revision A
IWMF1_13-133_300_125631 1
1650
Date: 19/11/21 Scale (at A1) Format
Drawn by: Melissa M As indicated A1
1 SECTION TYPE A CRANE RUNWAY BEAM 1A SECTION
Checked by: Martin H Status
- 1 : 10 CONNECTION DETAIL TO RC COLUMN - 1 : 10
Approved by:Kenny Y DES

1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

NOTES: Revision Schedule

No. Date Description Checked by Approved by

PBC 1. FOR GENERAL NOTES, REFER TO DRAWING NO.
IWMF1-13_133_300_120001 AND 120002. 0 19-NOV-2021 DDA SUBMISSION MH KY
1 08-APR-2022 DDA SUBMISSION MH KY
H 2. FOR TYPICAL DETAILS, REFER TO DRAWING NO.
H
IWMF1_13-133_300_120101, 120111 AND 120121

4
PBD SERIES.

3. THE STRUCTURAL PROVISION FOR THE CRANE

4
IN THIS DRAWING IS FOR INFORMATION ONLY.
PBE IT SHALL BE REVIEWED IN CONJUCTION WITH
THE E&M DESIGN.

4. FOR CRANE TRACK TOLERANCE REQUIREMENT,

RC BEAM 1090 420 REFER TO DDA PACKAGE 2.3.16.01.02 MECHANICAL
WORKS DESIGN - WASTE CRANE AND GRAPPLE,
DRAWING NO. IWMF1_43-211_250_000102.
RC COLUMN

BEAM MARK SIZE

Employer
RWB-01 UB914x419x388
RWB-01 RWB-02 UB610x305x179
G G
RWB-03 UB914x305x201
20mm THK. RWB-04 UC254x254x107
STIFFENER PLATES 4A RWB-05 UC305x305x137
12 - ST-01 UB305x127x42 Supervising Officer

450 ST-02 UB610x305x179

LENGTH
12
RC PLINTH

150
250 + 41.450
500x800x16 Main Contractor
BASE PLATE
ST-02

100

60
6-M30x400mm 12
CAST-IN HEADED BOLTS

150
WITH NUT AND WASHER

80
10

340
F 4-M30 BOLTS Designers F

150

120
500x500x30 WITH 75MM SLOT HOLE
BASE PLATE

75
1000
100

120
1650Lx800Wx1700D
CORBEL TYPE A
TL +40.499

150

120
12
REFER TO CORBEL Design Checker

340
REINFORCEMENT FOR
DETAILS

80
12
60 300 60
RWB-01
500
20mm THK. 20mm THK

60
STIFFENER PLATES PLATE
+ 40.499

1650 6-M30x250mm
E E
CAST-IN HEADED BOLTS
WITH NUT AND WASHER
Certification

RC BEAM

2 TYPE A BOTTOM CONNECTION DETAILS

- 1 : 10
4 STEEL BEAM TIE BACK CONNECTION DETAILS

D
- 1 : 10
FOR MARKUP D

RC BEAM
600

RC COLUMN
500
1090
RWB-01
60 380 60 RC PLINTH

20mm THK.
16mm THK. TIE PLATE STIFFENER PLATE
C 500 C

60
3-M30x250mm 10 1200 500x500x30
HEADED STUD ANCHORS 60 80 3-M30 BASE PLATE
8 BOLTS
250 16
10

340
90

60

60
110

110

110

800
950
400

500
110

60 110

60 110

ST-02 Project Name

340
1650Lx800Wx1700D Contract No. EP/SP/66/12
90

CORBEL TYPE A 500x800x16 Integrated Waste Management Facilities

TL +40.499 BASE PLATE
3-M30 Phase 1
B BOLTS 60 60 REFER TO CORBEL B
REINFORCEMENT FOR
8 DETAILS
L150x150x16
Design Package
200x400x16mm THK + 40.499
EMBED PLATE 2.3.14.01.01
6-M30x250mm PROCESS BUILDING VOL. 1 (BUNKER) &
CAST-IN HEADED BOLTS 2.5.14 WASTEWATER TREATMENT PLAN
WITH NUT AND WASHER STRUCTURAL DESIGN
20mm THK. Drawing Title
1650 STIFFENER PLATE
PROCESS BUILDING - BUNKER
CRANE RUNWAY BEAM
RC BEAM CONNECTION DETAILS - TYPE A
SHEET 2 OF 2
UNDER SEPARATE SUBMISSION
A Drawing Number Revision A
3 TYPE A TOP CONNECTION DETAILS 4A STEEL BEAM TIE BACK CONNECTION DETAILS IWMF1_13-133_300_125632 1
- 1 : 10 - 1 : 10
Date: 19/11/21 Scale (at A1) Format
Drawn by: Melissa M 1 : 10
As indicated A1
Checked by: Martin H Status
Approved by:Kenny Y DES

1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12
Revision Schedule
NOTES:
PB27 PB26 PB17 PB16 PB7 PB6 No. Date Description Checked by Approved by
1. FOR GENERAL NOTES, REFER TO DRAWING NO.
IWMF1-13_133_300_120001 AND 120002. 0 19-NOV-2021 DDA SUBMISSION MH KY
1 08-APR-2022 DDA SUBMISSION MH KY
H H
PB32 PB31PB30PB29PB28 PB25PB24PB23PB22PB21PB20PB19PB18 PB15PB14PB13PB12PB11PB10 PB9 PB8 PB5 PB4 PB3 PB2 PB1 2. FOR TYPICAL DETAILS, REFER TO DRAWING NO.
IWMF1_13-133_300_120101, 120111 AND 120121
SERIES.

3. THE STRUCTURAL PROVISION FOR THE CRANE

IN THIS DRAWING IS FOR INFORMATION ONLY.
IT SHALL BE REVIEWED IN CONJUCTION WITH
THE E&M DESIGN.

4. FOR CRANE TRACK TOLERANCE REQUIREMENT,

PBA REFER TO DDA PACKAGE 2.3.16.01.02 MECHANICAL
WORKS DESIGN - WASTE CRANE AND GRAPPLE,
DRAWING NO. IWMF1_43-211_250_000102.
PBB
BEAM MARK SIZE
Employer
RWB-01 UB914x419x388
PBC RWB-02 UB610x305x179
G G
RWB-03 UB914x305x201
RWB-04 UC254x254x107

1
PBD RWB-05 UC305x305x137
Supervising Officer
ST-01 UB305x127x42
ST-02 UB610x305x179

PBE 1

Main Contractor

PBF

PBG
F Designers F

PBH

PBJ Design Checker

+38.100 WALKWAY ROOF LEVEL KEYPLAN

RC COLUMN 1A ℄
- 220
E E
℄
40 70 70 40
10 1200 Certification
3-M20 3-M20
60 80 16mm THK. 60 60 BOLTS 3-M20
BOLTS 250 TIE PLATE BOLTS 16mm THK. TIE PLATE
3-M20x250mm
HEADED STUD ANCHORS 3 + 41.450
+ 41.450
125634 RWB-01
75 25

8
200

12
25 75

20mm THK. 300

8 STIFFENER PLATES
L150x150x16

D 200x270x16mm THK
RWB-01
FOR MARKUP D
EMBED PLATE 12
20mm THK.
STIFFENER PLATES

6-M20x400mm GRADE 8.8

CAST-IN HEADED BOLTS
60 60 WITH NUT AND WASHER
2 500x300x30
RC BEAM 500x300x30 125634 BASE PLATE
BASE PLATE
+ 40.499
+ 40.499

30
C 6-M20x400mm C

400
CAST-IN HEADED BOLTS

400
WITH NUT AND WASHER

900
900

100 300 100 100 60 90 90 60 100

1650Lx500Wx1700D
CORBEL TYPE A1 Project Name
TL +40.499 1650Lx500Wx1700D
REFER TO CORBEL CORBEL TYPE A1 Contract No. EP/SP/66/12
REINFORCEMENT FOR TL +40.499 Integrated Waste Management Facilities

1700
DETAILS
1700

REFER TO CORBEL Phase 1

B REINFORCEMENT FOR B
DETAILS
Design Package
2.3.14.01.01
PROCESS BUILDING VOL. 1 (BUNKER) &
2.5.14 WASTEWATER TREATMENT PLAN
STRUCTURAL DESIGN
500 Drawing Title

800
800

PROCESS BUILDING - BUNKER

RC COLUMN CRANE RUNWAY BEAM
CONNECTION DETAILS - TYPE A1
SHEET 1 OF 2
UNDER SEPARATE SUBMISSION
A Drawing Number Revision A
IWMF1_13-133_300_125633 1
RC BEAM
1650 Date: 19/11/21 Scale (at A1) Format
TYPE A1 CRANE RUNWAY BEAM Drawn by: Melissa M As indicated A1
1 SECTION CONNECTION DETAIL TO RC COLUMN 1A SECTION
Checked by: Martin H Status
- 1 : 10 - 1 : 10
Approved by:Kenny Y DES

1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12
NOTES: Revision Schedule

1. FOR GENERAL NOTES, REFER TO DRAWING NO. No. Date Description Checked by Approved by
IWMF1-13_133_300_120001 AND 120002. 0 19-NOV-2021 DDA SUBMISSION MH KY
1 08-APR-2022 DDA SUBMISSION MH KY
H 2. FOR TYPICAL DETAILS, REFER TO DRAWING NO. H
IWMF1_13-133_300_120101, 120111 AND 120121
SERIES.

3. THE STRUCTURAL PROVISION FOR THE CRANE

IN THIS DRAWING IS FOR INFORMATION ONLY.
RC BEAM IT SHALL BE REVIEWED IN CONJUCTION WITH
THE E&M DESIGN.

4. FOR CRANE TRACK TOLERANCE REQUIREMENT,

RC COLUMN 1650 REFER TO DDA PACKAGE 2.3.16.01.02 MECHANICAL
WORKS DESIGN - WASTE CRANE AND GRAPPLE,
RWB-01
DRAWING NO. IWMF1_43-211_250_000102.
1300

BEAM MARK SIZE

Employer
RWB-01 UB914x419x388
RWB-02 UB610x305x179
G 20mm THK. 20mm THK. G
STIFFENER PLATES STIFFENER PLATES RWB-03 UB914x305x201
1050 500 100 RWB-04 UC254x254x107
RWB-05 UC305x305x137
12 40 60 300 60 40 12 ST-01 UB305x127x42 Supervising Officer

ST-02 UB610x305x179

Main Contractor

60
6-M20x400mm

90
CAST-IN HEADED BOLTS

300

500
WITH NUT AND WASHER

90
500x300x30

60
BASE PLATE
F Designers F

12 12
1650Lx500Wx1700D
CORBEL TYPE A1
TL +40.449 Design Checker
REFER TO CORBEL
REINFORCEMENT FOR
DETAILS

E E

Certification
2 TYPE A1 BOTTOM CONNECTION DETAILS
- 1 : 10

D
FOR MARKUP D

RC BEAM

RC COLUMN
RWB-01

20mm THK. 20mm THK.

STIFFENER PLATES STIFFENER PLATES
3-M20
BOLTS
C C
10 1200
60 80
3-M20x250mm 250 16
HEADED STUD ANCHORS 60 60 1650Lx500Wx1700D
CORBEL TYPE A1
TL +40.449
65 70 70 65

40 70 70 40

40 70 70 40

REFER TO CORBEL
REINFORCEMENT FOR
270

220

DETAILS

500x300x30
BASE PLATE Project Name

8 Contract No. EP/SP/66/12

8
Integrated Waste Management Facilities
B 200x270x16mm THK 3-M20 Phase 1 B
EMBED PLATE L150x150x16 BOLTS

16mm THK. TIE PLATE Design Package

2.3.14.01.01
PROCESS BUILDING VOL. 1 (BUNKER) &
2.5.14 WASTEWATER TREATMENT PLAN
STRUCTURAL DESIGN
Drawing Title
PROCESS BUILDING - BUNKER
CRANE RUNWAY BEAM
CONNECTION DETAILS - TYPE A1
3 TYPE A1 TOP CONNECTION DETAILS SHEET 2 OF 2
- 1 : 10 UNDER SEPARATE SUBMISSION
A Drawing Number Revision A
IWMF1_13-133_300_125634 1

Date: 19/11/21 Scale (at A1) Format

Drawn by: Melissa M 1 : 10
As indicated A1
Checked by: Martin H Status
Approved by:Kenny Y DES

1 2 3 4 5 6 7 8 9 10 11 12