RR Series Power Relays

Heavy-duty power relays

Large capacity 10A — 1, 2, and 3 poles
• Available in pin and blade terminal styles.
Relays
• Options include an indicator, check button for test opera-
tion, and side flange.
• DIN rail, surface, and panel mount sockets are available for RJ
a wide variety of mounting applications.

RU

RY

RM

Part No.
Termination Style Coil Voltage Code ∗
SPDT DPDT 3PDT (Note) RH
Basic – RR2P-U∗ ★ RR3P-U∗ ★ RR3PA-U∗ ★
With Indicator – RR2P-UL∗ ★ RR3P-UL∗ ★ RR3PA-UL∗ ★
Pin Terminal With Check Button – RR2P-UC∗ ★ RR3P-UC∗ ★ RR3PA-UC∗ ★ RR
AC6, AC12, AC24,
With Indicator and
– RR2P-ULC∗ ★ RR3P-ULC∗ ★ RR3PA-ULC∗ ★ AC50, AC100, AC110,
Check Button
AC115, AC120,
AC200, AC220, RV8H
Basic RR1BA-U∗ RR2BA-U∗ RR3B-U∗ –
AC230, AC240,
With Indicator RR1BA-UL∗ RR2BA-UL∗ RR3B-UL∗ –
DC6, DC12, DC24,
Blade With Check Button RR1BA-UC∗ RR2BA-UC∗ RR3B-UC∗ – DC48, DC110 RF1V
Terminal With Indicator and
RR1BA-ULC∗ RR2BA-ULC∗ RR3B-ULC∗ –
Check Button
Side Flange RR1BA-US∗ RR2BA-US∗ RR3B-US∗ – RF2
Note:
Both RR3P and RR3PA are 3PDT relays and have different terminal Part No. Development
arrangements. See Internal Connection on page 51. When ordering, specify the Part No. and coil voltage code.
Part numbers marked with ★ in the table above are UL-recognized,
CSA-certified, and TÜV-approved. Others are UL-recognized and (Example) RR3P-U AC110
CSA-certified. Sockets
Part No. Coil Voltage Code

Coil Ratings SJ
Operation Characteristics
Rated Current (mA) ±15% at 20°C
Coil Resistance (Ω) (against rated values at 20°C)
Rated Voltage (V)
±10% at 20°C Max. Continuous Minimum
50Hz 60Hz Dropout Voltage DF
Applied Voltage Pickup Voltage
6 490 420 4.9
12 245 210 18
SU
24 121 105 79
50 58 50 350
AC (50/60Hz)

100 29 25 1,370
SF1V
110 27 23 1,680 80% 30%
110%
115 25 21.5 1,800 maximum minimum
120 24 20.5 2,100
Relay
200 14.5 12.5 5,740 Sockets
220 13.3 11.5 7,360
230 12.7 11 7,830
240 12.1 10.5 8,330
6 240 25
12 120 100
80% 15%
DC

24 60 400 110%
maximum minimum
48 30 1,600
110 13 8,460

49
RR Series Power Relays
Contact Ratings CSA Ratings
Maximum Contact Capacity Voltage Resistive General use
Allowable Contact Power Rated Load 240V AC 10A 7A
Continuous 120V AC 10A 7.5A
Current Resistive Inductive Resistive Inductive
Voltage 100V DC — 0.5A
Load Load Load Load
1650VA 110V AC 10A 7.5A 30V DC 10A 7.5A
1100VA AC
10A AC 220V AC 7.5A 5A TÜV Ratings
150W DC
300W DC 30V DC 10A 5A 240V AC 10A
Note: Inductive load for the rated load — cos ø = 0.3, L/R = 7 ms 30V DC 10A
UL Ratings AC: cos ø = 1.0, DC: L/R = 0 ms
Horse Power
Voltage Resistive General use
Raging
240V AC 10A 7A 1/3 HP
120V AC 10A 7.5A 1/4 HP
30V DC 10A 7A —

Specifications
Contact Material Silver
Contact Resistance ∗1 30 mΩ maximum
Minimum Applicable Load 1V DC, 10 mA (reference value)
Operate Time ∗2 25 ms maximum
Release Time ∗2 25 ms maximum
Power Consumption AC: 3 VA (50 Hz), 2.5 VA (60 Hz)
(approx.) DC: 1.5W
Insulation Resistance 100 MΩ minimum (500V DC megger)
Between live and dead parts: 1500V AC, 1 minute
Between contact and coil: 1500V AC, 1 minute
Pin Terminal
Between contacts of different poles: 1500V AC, 1 minute
Between contacts of the same pole: 1000V AC, 1 minute
Dielectric Strength
Between live and dead parts: 2000V AC, 1 minute
Between contact and coil: 2000V AC, 1 minute
Blade Terminal
Between contacts of different poles: 2000V AC, 1 minute
Between contacts of the same pole: 1000V AC, 1 minute
Electrical: 1800 operations/h maximum
Operating Frequency
Mechanical: 18,000 operations/h maximum
Damage limits: 10 to 55 Hz, amplitude 0.5 mm
Vibration Resistance
Operating extremes: 10 to 55 Hz, amplitude 0.5 mm
Damage limits: 1000 m/s2
Shock Resistance
Operating extremes: 100 m/s2
Mechanical Life 10,000,000 operations
Electrical Life 200,000 operations (220V AC, 5A)
Operating Temperature ∗3 –25 to +40°C (no freezing)
Operating Humidity 5 to 85% RH (no condensation)
Weight (approx.) (Basic) RR2P: 90g, RR3P/RR3PA: 96g, RR1BA/RR2BA/RR3B: 82g
Note: Above values are initial values.
∗1: Measured using 5V DC, 1A voltage drop method
∗2: Measured at the rated voltage (at 20°C), excluding contact bouncing
∗3: For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve.

50
 RR Series Power Relays
Internal Connection (Bottom View)
Basic
RR2P-U RR3P-U RR3PA-U RR1BA-U RR2BA-U RR3B-U
With Check Button
4 5 6 6 Relays
5 7 5 7 2 1 3 1 2 3
Front
3 6 4 8 4 8 5 4 6 4 5 6 Pushbutton
RJ
3 9 3 9 7 7 9 7 8 9
2 7
(–) (+) 2 10 2 10 A B A B A B Contacts can be
1 8
(–) (+) (–) (+)
(–) (+) (–) (+) (–) (+)
operat­ed by pressing
1 11 1 11
the check button. Press
RU
the button quickly to
prevent arcing.

With Indicator (-UL) RY

Voltage RR2P RR3P RR3PA RR1BA RR2BA RR3B
4 5 6 6 2 1 3 1 2 3
5 7 5 7

3 6 4 8 4 8
5 4 6 4 5 6 RM
7 7 9 7 8 9
3 9 3 9
Below 100V 2 7
(–) (+) A B A B A B
AC/DC 2 10 2 10
(–) (+) (–) (+) (–) (+) (–) (+) (–) (+) RH
1 8 1 11 1 11

∗ ∗ ∗
∗ ∗ ∗
RR
4 5 6 6 2 1 3 1 2 3
5 7 5 7
5 4 6 4 5 6
3 6 4 8 4 8
100V AC/ RV8H
7 7 9 7 8 9
DC and 3 9 3 9
2 7
above (–) (+) 2 10 2 10 A B A B A B
(–) (+) (–) (+) (–) (+) (–) (+) (–) (+)
1 8 1 11 1 11
RF1V

When the relay is energized, the indicator goes on.

∗ The LED protection diode is not contained in relays for below 100V DC. RF2

Characteristics (Reference Data)

Maximum Switching Capacity Electrical Life Curve
10.0 AC Load Sockets
AC
resistive 1000
5.0
AC SJ
inductive 500
Load Current (A)

Life ( × 10,000 operations)

DC resistive

1.0 DF
DC inductive 100
110V AC resistive
0.5
50
220V AC resistive
110V AC inductive SU
20
220V AC inductive

1 5 10 30 50 100 200 300 10

0.1 0.5 1 5 10
Load Voltage (V) Load Current (A) SF1V

Continuous Load Current vs. Operating Temperature Curve DC Load

(Basic, With Check Button, and Side Flange) Relay
1000 Sockets
500
100 30V DC
Life (× 10,000 operations)

90 resistive
Operating Temperature (oC)

80
70 100
DC Coil
60 100V DC resistive
50
50
AC Coil
100V DC inductive
40 20
30 30V DC inductive
10
20 0.01 0.05 0.1 0.5 1 5 10
10 Load Current (A)

0
1 2 3 4 5 6 7 8 9 10
Load Current (A)

51
RR Series Power Relays
Dimensions
RR2P-U/RR2P-UL
Total length from panel surface including relay socket
Applicable Socket and Hold-down Spring
SR2P-05A: 84.5 (87.5) max., SR2P-511: 63 (68) max. Socket Hold-down
Mounting Style Part No. Spring
SR2P-05A
4 5 SR2B-02F1
DIN Rail Mount Socket SR2P-05C

35.6
3 6
SFA-202
2
1 8
7 SR2P-06A
w/Solder
Panel SR2P-511
Terminals
9.9 28.6 Mount SR3P-01F1
Socket w/Wire Wrap
55.5 max. 13 SR2P-70
Dimensions in the ( ) Terminals
(Photo: RR2P-U) include a hold-down spring.

RR3P-U/RR3P-UL/
RR3PA-U/RR3PA-UL Applicable Socket and Hold-down Spring
Total length from panel surface including relay socket
Socket Hold-down
SR3P-05A: 84.5 (87.5) max., SR3P-511: 63 (68) max.
Mounting Style Part No. Spring
SR3P-05A
6
5 7
SR3B-02F1
4 8 DIN Rail Mount Socket SR3P-05C
SFA-202

35.6
3 9 SR3P-06A
2 10 w/Solder
1 11 Panel SR3P-511
Terminals
9.9 Mount SR3P-01F1
35.6 Socket w/Wire Wrap
55.5 max. 13 SR3P-70
Terminals
Dimensions in the ( )
(Photo: RR3P-U) include a hold-down spring.

RR1BA-U/RR1BA-UL/
RR2BA-U/RR2BA-UL/
4.7

RR3B-U/RR3B-UL
Applicable Socket and Hold-down Spring
Socket Hold-down
Mounting Style Part No. Spring
3.0 × ø2.0 oblong hole
SR3B-02F1
Total length from panel surface including relay socket DIN Rail Mount Socket SR3B-05
SFA-202
SR3B-05: 73 (76) max., SR3B-51: 56 (60) max.
Panel Mount Socket SR3B-51 SR3B-02F1
0.5

1 2 3
4 5 6
36

7 8 9

(Photo: RR3B-U)
A B

36
47.5 max. 7.3
Dimensions in the ( )
include a hold-down spring.

RR1BA-US
RR2BA-US 63.5
RR3B-US 7.3 3.0 × ø2.0 oblong hole

2-ø4.5 Mounting Holes

11.1 11.1
16.0
4.2

63.5
4.7

47.5 max. 16.1

73.5

(Photo: RR3B-US)
0.5

1 2 3
4 5 6
36

7 8 9

A B

36 All dimensions in mm.

52