Default Project

Hydrostatics & Stability Analysis

Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition Summary

Load Condition Parameters

Condition Weight / Sinkage LCG / Trim TCG / Heel VCG (mm)
Condition 1 -700.000 mm 0.000 deg 0.000 deg 0
Condition 2 -500.000 mm 0.000 deg 0.000 deg 0
Condition 3 -300.000 mm 0.000 deg 0.000 deg 0
Condition 4 0.000 mm 0.000 deg 0.000 deg 0

Resulting Model Attitude and Hydrostatic Properties

Condition Sinkage (mm) Trim(deg) Heel(deg) Ax(m^2)
Condition 1 -700.000 0.000 0.000 1.41
Condition 2 -500.000 0.000 0.000 2.18
Condition 3 -300.000 0.000 0.000 2.96
Condition 4 0.000 0.000 0.000 4.15

Condition Displacement LCB(mm) TCB(mm) VCB(mm) Wet Area (m^2)

Weight (tonne-f)
Condition 1 10.076 11417.827 0.000 -833.064 53.017
Condition 2 21.676 11250.150 0.000 -706.820 68.650
Condition 3 34.438 11043.679 0.000 -592.742 78.419
Condition 4 54.843 10819.669 0.000 -427.373 92.254

Condition Awp(m^2) LCF(mm) TCF(mm) VCF(mm)

Condition 1 49.543 11443.179 0.000 -700.000
Condition 2 60.194 10842.391 0.000 -500.000
Condition 3 63.978 10574.676 0.000 -300.000
Condition 4 68.566 10322.570 0.000 0.000

Orca3D - Marine Design Plug-in for Rhinoceros Page 1 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition BMt(mm) BMl(mm) GMt(mm) GMl(mm)

Condition 1 4208.101 107751.769 3375.037 106918.705
Condition 2 3157.816 62735.931 2450.997 62029.111
Condition 3 2246.661 44273.429 1653.919 43680.687
Condition 4 1646.461 31318.362 1219.088 30890.989

Condition Cb Cp Cwp Cx Cws Cvp

Condition 1 0.354 0.377 0.713 0.938 3.942 0.496
Condition 2 0.494 0.525 0.845 0.941 3.475 0.585
Condition 3 0.572 0.613 0.873 0.933 3.145 0.656
Condition 4 0.634 0.692 0.895 0.916 2.927 0.709

Notes
1. Locations such as the center of buoyancy and center of flotation are measured from the origin in
the Rhinoceros world coordinate system.
2. The orientation of the model for an Orca3D hydrostatics solution is defined in terms of “sinkage,”
“trim,” and “heel.” The sinkage value represents the depth of the body origin (i.e. the Rhino world
origin) below the resultant flotation plane, and is sometimes referred to as "origin depth." Heel and
trim represent angular rotations about the Rhino longitudinal and transverse axes, respectively, and
are taken in that order. For a more detailed description of these terms see the Orca3D
documentation.
3. Hull form coefficients are non-dimensionalized by the waterline length.
4. Calculation of Cp and Cx use Orca sections to determine Ax. If no Orca sections are defined, these
values will be reported as zero.

Orca3D - Marine Design Plug-in for Rhinoceros Page 2 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Volumetric Properties
6

-2

-4

-6

-8
LCB TCB VCB Displacement
-10
400.000 600.000 800.000 1000.000
Draft (mm)

Orca3D - Marine Design Plug-in for Rhinoceros Page 3 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Area Properties
10

LCF TCF Waterplane Area Wet Area

-2
400.000 600.000 800.000 1000.000
Draft (mm)

Orca3D - Marine Design Plug-in for Rhinoceros Page 4 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Hull Form Coefficients

1

0.8

0.6

0.4

0.2

Cb Cp Cwp Cx Cws Cvp

0
400.000 600.000 800.000 1000.000
Draft (mm)

Orca3D - Marine Design Plug-in for Rhinoceros Page 5 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Orca3D - Marine Design Plug-in for Rhinoceros Page 6 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Object Type Name ID

superficie Transom {44c028fc-c0aa-4513-a643-cb441185fa95}
superficie Hull {5a96d28a-ace5-41e8-82d6-5021329a4dc1}
superficie Deck {3bcbcae0-4695-46b3-a2ac-7d23f98dc058}
superficie Transom {0353d598-3c42-4a2c-b8e4-8fe45355f0df}
superficie Hull {801af2c6-6339-44e0-9914-4e85cdb215f6}
superficie Deck {b594cfae-ec90-48e0-9685-4788efdf5c53}

Orca3D - Marine Design Plug-in for Rhinoceros Page 7 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition Name=Condition 1,Model Sinkage=-700.00,Model Trim=0.00,Model Heel=0.00

General Info

Analysis Type FreeFloatEquilibrium Up Direction = Positive_Z

Fwd Direction = Negative_X

Surface Meshing Parameters

Density 1 Minimum edge length 0.0001 mm

Maximum angle 0 Maximum edge length 0 mm
Maximum aspect ratio 0 Max distance, edge to surf. 0 mm
Minimum initial grid quads 0 Jagged seams False
Refine mesh True Simple planes True

Load Condition Parameters

Model Sinkage -700.000 mm

Model Trim 0.000 deg
Model Heel 0.000 deg
VCG 0 mm
Fluid Type Seawater
Fluid Density 1025.900 kg/m^3
Mirror Geometry False

Resultant Model Attitude

Heel Angle 0.000 deg Sinkage -700.000 mm

Trim Angle 0.000 deg

Overall Dimensions

Length Overall, LOA 18765.000 mm Loa / Boa 3.993

Beam Overall, Boa 4699.968 mm Boa / D 2.238
Depth Overall, D 2100.000 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 8 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Waterline Dimensions

Waterline Length, Lwl 18415.193 mm Lwl / Bwl 4.884

Waterline Beam, Bwl 3770.580 mm Bwl / T 9.426
Navigational Draft, T 400.000 mm D/T 5.250

Volumetric Values

Displacement Weight 10.076 tonne-f Displ-Length Ratio 44.965

Volume 9.821 m^3
LCB 11417.827 mm FB/Lwl 0.601 AB/Lwl 0.399
TCB 0.000 mm TCB / Bwl 0.000
VCB -833.064 mm
Wetted Surface Area 53.017 m^2
Moment To Trim 0.585 tonne-
m/cm

Waterplane Values

Waterplane Area, Awp 49.543 m^2

LCF 11443.179 mm FF/Lwl 0.602 AF/Lwl 0.398
TCF 0.000 mm TCF / Lwl 0.000
Weight To Immerse 0.508 tonne-f/cm

Sectional Parameters

Ax 1.414 m^2
Ax Location 18765.000 mm Ax Location / Lwl 1.000

Hull Form Coefficients

Cb 0.354 Cx 0.938
Cp 0.377 Cwp 0.713
Cvp 0.496 Cws 3.942

Orca3D - Marine Design Plug-in for Rhinoceros Page 9 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Static Stability Parameters

I(transverse) 41.329 m^4 I(longitudinal) 1058.255 m^4

BMt 4208.101 mm BMl 107751.769 mm
GMt 3375.037 mm GMl 106918.705 mm
Mt 4075.037 mm Ml 107618.705 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 10 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Location (mm) Immersed Area (m^2) Immersed Girth (mm)

1340.357 0.110 939.844
2680.714 0.221 1361.126
4021.071 0.334 1856.866
5361.429 0.447 2381.836
6701.786 0.540 2820.585
8042.143 0.595 3084.105
9382.500 0.619 3197.378
10722.857 0.635 3276.204
12063.214 0.652 3359.111
13403.571 0.670 3446.480
14743.929 0.689 3538.687
16084.286 0.710 3855.302
17424.643 0.733 3873.584
18765.000 1.414 11810.148

Orca3D - Marine Design Plug-in for Rhinoceros Page 11 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Heel(deg) Trim(deg) Righting Arm Righting Moment

(mm) (tonne-m)
0.000 0.000 0.000 0.00
5.000 -0.029 261.852 2.64
10.000 -0.080 445.198 4.49
15.000 -0.151 577.508 5.82
20.000 -0.234 678.803 6.84
25.000 -0.324 761.259 7.67
30.000 -0.412 833.061 8.39
50.000 -0.411 895.222 9.02
70.000 -0.097 754.454 7.60
90.000 0.284 355.551 3.58

Orca3D - Marine Design Plug-in for Rhinoceros Page 12 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition Name=Condition 2,Model Sinkage=-500.00,Model Trim=0.00,Model Heel=0.00

General Info

Analysis Type FreeFloatEquilibrium Up Direction = Positive_Z

Fwd Direction = Negative_X

Surface Meshing Parameters

Density 1 Minimum edge length 0.0001 mm

Maximum angle 0 Maximum edge length 0 mm
Maximum aspect ratio 0 Max distance, edge to surf. 0 mm
Minimum initial grid quads 0 Jagged seams False
Refine mesh True Simple planes True

Load Condition Parameters

Model Sinkage -500.000 mm

Model Trim 0.000 deg
Model Heel 0.000 deg
VCG 0 mm
Fluid Type Seawater
Fluid Density 1025.900 kg/m^3
Mirror Geometry False

Resultant Model Attitude

Heel Angle 0.000 deg Sinkage -500.000 mm

Trim Angle 0.000 deg

Overall Dimensions

Length Overall, LOA 18765.000 mm Loa / Boa 3.993

Beam Overall, Boa 4699.968 mm Boa / D 2.238
Depth Overall, D 2100.000 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 13 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Waterline Dimensions

Waterline Length, Lwl 18476.104 mm Lwl / Bwl 4.792

Waterline Beam, Bwl 3855.854 mm Bwl / T 6.426
Navigational Draft, T 600.000 mm D/T 3.500

Volumetric Values

Displacement Weight 21.676 tonne-f Displ-Length Ratio 95.779

Volume 21.128 m^3
LCB 11250.150 mm FB/Lwl 0.593 AB/Lwl 0.407
TCB 0.000 mm TCB / Bwl 0.000
VCB -706.820 mm
Wetted Surface Area 68.650 m^2
Moment To Trim 0.728 tonne-
m/cm

Waterplane Values

Waterplane Area, Awp 60.194 m^2

LCF 10842.391 mm FF/Lwl 0.571 AF/Lwl 0.429
TCF 0.000 mm TCF / Lwl 0.000
Weight To Immerse 0.618 tonne-f/cm

Sectional Parameters

Ax 2.177 m^2
Ax Location 18765.000 mm Ax Location / Lwl 1.000

Hull Form Coefficients

Cb 0.494 Cx 0.941
Cp 0.525 Cwp 0.845
Cvp 0.585 Cws 3.475

Orca3D - Marine Design Plug-in for Rhinoceros Page 14 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Static Stability Parameters

I(transverse) 66.719 m^4 I(longitudinal) 1325.502 m^4

BMt 3157.816 mm BMl 62735.931 mm
GMt 2450.997 mm GMl 62029.111 mm
Mt 2950.997 mm Ml 62529.111 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 15 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Location (mm) Immersed Area (m^2) Immersed Girth (mm)

1340.357 0.250 1424.038
2680.714 0.498 2048.424
4021.071 0.754 2802.329
5361.429 1.015 3685.395
6701.786 1.211 3994.455
8042.143 1.314 4137.487
9382.500 1.352 4177.939
10722.857 1.376 4195.849
12063.214 1.400 4213.622
13403.571 1.424 4231.271
14743.929 1.448 4248.791
16084.286 1.472 4266.126
17424.643 1.495 4283.156
18765.000 2.177 12618.406

Orca3D - Marine Design Plug-in for Rhinoceros Page 16 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Heel(deg) Trim(deg) Righting Arm Righting Moment

(mm) (tonne-m)
0.000 0.000 0.000 0.00
5.000 0.026 210.759 4.57
10.000 0.069 375.793 8.15
15.000 0.073 492.121 10.67
20.000 0.051 580.216 12.58
25.000 0.011 651.463 14.12
30.000 -0.038 713.795 15.47
50.000 -0.084 915.704 19.85
70.000 0.234 684.748 14.84
90.000 0.620 258.001 5.59

Orca3D - Marine Design Plug-in for Rhinoceros Page 17 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition Name=Condition 3,Model Sinkage=-300.00,Model Trim=0.00,Model Heel=0.00

General Info

Analysis Type FreeFloatEquilibrium Up Direction = Positive_Z

Fwd Direction = Negative_X

Surface Meshing Parameters

Density 1 Minimum edge length 0.0001 mm

Maximum angle 0 Maximum edge length 0 mm
Maximum aspect ratio 0 Max distance, edge to surf. 0 mm
Minimum initial grid quads 0 Jagged seams False
Refine mesh True Simple planes True

Load Condition Parameters

Model Sinkage -300.000 mm

Model Trim 0.000 deg
Model Heel 0.000 deg
VCG 0 mm
Fluid Type Seawater
Fluid Density 1025.900 kg/m^3
Mirror Geometry False

Resultant Model Attitude

Heel Angle 0.000 deg Sinkage -300.000 mm

Trim Angle 0.000 deg

Overall Dimensions

Length Overall, LOA 18765.000 mm Loa / Boa 3.993

Beam Overall, Boa 4699.968 mm Boa / D 2.238
Depth Overall, D 2100.000 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 18 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Waterline Dimensions

Waterline Length, Lwl 18525.077 mm Lwl / Bwl 4.681

Waterline Beam, Bwl 3957.529 mm Bwl / T 4.947
Navigational Draft, T 800.000 mm D/T 2.625

Volumetric Values

Displacement Weight 34.438 tonne-f Displ-Length Ratio 150.970

Volume 33.569 m^3
LCB 11043.679 mm FB/Lwl 0.583 AB/Lwl 0.417
TCB 0.000 mm TCB / Bwl 0.000
VCB -592.742 mm
Wetted Surface Area 78.419 m^2
Moment To Trim 0.812 tonne-
m/cm

Waterplane Values

Waterplane Area, Awp 63.978 m^2

LCF 10574.676 mm FF/Lwl 0.558 AF/Lwl 0.442
TCF 0.000 mm TCF / Lwl 0.000
Weight To Immerse 0.656 tonne-f/cm

Sectional Parameters

Ax 2.955 m^2
Ax Location 18765.000 mm Ax Location / Lwl 1.000

Hull Form Coefficients

Cb 0.572 Cx 0.933
Cp 0.613 Cwp 0.873
Cvp 0.656 Cws 3.145

Orca3D - Marine Design Plug-in for Rhinoceros Page 19 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Static Stability Parameters

I(transverse) 75.417 m^4 I(longitudinal) 1486.200 m^4

BMt 2246.661 mm BMl 44273.429 mm
GMt 1653.919 mm GMl 43680.687 mm
Mt 1953.919 mm Ml 43980.687 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 20 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Location (mm) Immersed Area (m^2) Immersed Girth (mm)

1340.357 0.444 1912.845
2680.714 0.890 2971.708
4021.071 1.350 3648.589
5361.429 1.721 4121.368
6701.786 1.967 4416.403
8042.143 2.089 4554.303
9382.500 2.132 4593.411
10722.857 2.157 4610.655
12063.214 2.181 4627.614
13403.571 2.205 4644.314
14743.929 2.229 4660.770
16084.286 2.252 4676.940
17424.643 2.275 4692.723
18765.000 2.955 13426.663

Orca3D - Marine Design Plug-in for Rhinoceros Page 21 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Heel(deg) Trim(deg) Righting Arm Righting Moment

(mm) (tonne-m)
0.000 0.000 0.000 0.00
5.000 0.010 144.788 4.99
10.000 0.046 291.122 10.03
15.000 0.106 419.660 14.45
20.000 0.138 519.713 17.90
25.000 0.149 603.191 20.77
30.000 0.148 678.197 23.36
50.000 0.177 814.629 28.05
70.000 0.470 592.926 20.42
90.000 0.847 208.644 7.19

Orca3D - Marine Design Plug-in for Rhinoceros Page 22 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Condition Name=Condition 4,Model Sinkage=0.00,Model Trim=0.00,Model Heel=0.00

General Info

Analysis Type FreeFloatEquilibrium Up Direction = Positive_Z

Fwd Direction = Negative_X

Surface Meshing Parameters

Density 1 Minimum edge length 0.0001 mm

Maximum angle 0 Maximum edge length 0 mm
Maximum aspect ratio 0 Max distance, edge to surf. 0 mm
Minimum initial grid quads 0 Jagged seams False
Refine mesh True Simple planes True

Load Condition Parameters

Model Sinkage 0.000 mm

Model Trim 0.000 deg
Model Heel 0.000 deg
VCG 0 mm
Fluid Type Seawater
Fluid Density 1025.900 kg/m^3
Mirror Geometry False

Resultant Model Attitude

Heel Angle 0.000 deg Sinkage 0.000 mm

Trim Angle 0.000 deg

Overall Dimensions

Length Overall, LOA 18765.000 mm Loa / Boa 3.993

Beam Overall, Boa 4699.968 mm Boa / D 2.238
Depth Overall, D 2100.000 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 23 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Waterline Dimensions

Waterline Length, Lwl 18586.095 mm Lwl / Bwl 4.508

Waterline Beam, Bwl 4123.034 mm Bwl / T 3.748
Navigational Draft, T 1100.000 mm D/T 1.909

Volumetric Values

Displacement Weight 54.843 tonne-f Displ-Length Ratio 238.062

Volume 53.459 m^3
LCB 10819.669 mm FB/Lwl 0.573 AB/Lwl 0.427
TCB 0.000 mm TCB / Bwl 0.000
VCB -427.373 mm
Wetted Surface Area 92.254 m^2
Moment To Trim 0.912 tonne-
m/cm

Waterplane Values

Waterplane Area, Awp 68.566 m^2

LCF 10322.570 mm FF/Lwl 0.546 AF/Lwl 0.454
TCF 0.000 mm TCF / Lwl 0.000
Weight To Immerse 0.703 tonne-f/cm

Sectional Parameters

Ax 4.154 m^2
Ax Location 18765.000 mm Ax Location / Lwl 1.000

Hull Form Coefficients

Cb 0.634 Cx 0.916
Cp 0.692 Cwp 0.895
Cvp 0.709 Cws 2.927

Orca3D - Marine Design Plug-in for Rhinoceros Page 24 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Static Stability Parameters

I(transverse) 88.018 m^4 I(longitudinal) 1674.241 m^4

BMt 1646.461 mm BMl 31318.362 mm
GMt 1219.088 mm GMl 30890.989 mm
Mt 1219.088 mm Ml 30890.989 mm

Orca3D - Marine Design Plug-in for Rhinoceros Page 25 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Location (mm) Immersed Area (m^2) Immersed Girth (mm)

1340.357 0.868 2883.977
2680.714 1.703 3751.927
4021.071 2.362 4348.137
5361.429 2.845 4773.928
6701.786 3.150 5048.825
8042.143 3.296 5179.392
9382.500 3.344 5216.589
10722.857 3.369 5232.833
12063.214 3.392 5248.571
13403.571 3.415 5263.851
14743.929 3.437 5278.714
16084.286 3.458 5293.145
17424.643 3.478 5307.065
18765.000 4.154 14639.050

Orca3D - Marine Design Plug-in for Rhinoceros Page 26 of 27

Default Project
Hydrostatics & Stability Analysis
Default Company
Report Time: Thursday, 14 September 2023, 13:52:54
Model Name:

Heel(deg) Trim(deg) Righting Arm Righting Moment

(mm) (tonne-m)
0.000 0.000 0.000 0.00
5.000 0.008 106.862 5.86
10.000 0.034 216.652 11.88
15.000 0.080 332.489 18.23
20.000 0.162 453.901 24.89
25.000 0.250 563.813 30.92
30.000 0.347 640.720 35.14
50.000 0.721 645.501 35.40
70.000 0.944 445.570 24.44
90.000 1.219 152.697 8.37

Orca3D - Marine Design Plug-in for Rhinoceros Page 27 of 27