Tech Note 923 - Resolving Excel Reporting Missing

This document provides steps to resolve an issue where the Microsoft Excel Application component is missing configuration required for ActiveFactory Reporting. The steps are: 1. Open the Component Services window and navigate to DCOM Config 2. Right click Microsoft Excel Application and select Properties 3. On the Identity tab, select the Interactive User option 4. Click Apply and OK, then refresh the Configurator 5. Populate the Historian Data Source and Configuration fields to complete the ActiveFactory Reporting configuration.

Uploaded by

profilemail8

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

21 views

Tech Note 923 - Resolving Excel Reporting Missing

Uploaded by

profilemail8

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 8

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

Tech Note 923

Resolving Issue: The Microsoft Excel Application component is missing additional configuration
required for ActiveFactory Reporting

All Tech Notes, Tech Alerts and KBCD documents and software are provided "as is" without warranty of any kind. See the Terms of Use for more information.

Topic#: 002738
Created: February 2013

Introduction
When configuring ActiveFactory Reporting website using the Configurator from the System Platform 2012 R2, you might encounter the
following warning message preventing the configuration from completing.

The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting.

This Tech Note shows how to resolve the issue so that you can continue configuring the ActiveFactory Reporting component successfully.

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

FIGure 1: EXCeL APPLICatION COmPONeNt IS MISSING

Application Versions
file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]
Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

Wonderware Information Server v5.0 or greater

Wonderware Historian Client v10.1 or greater

Microsoft Excel 2010

Note: This Tech Note assumes that you are familiar with the above products. If you have any questions about Microsoft Excel, please
contact Microsoft technical support at www.microsoft.com.

Procedure
1. From the Start Menu, click Run.

2. Type comexp.msc /32.

FIGure 2: RuN COmPeXP.mSC /32

3. In the Component Services window, expand Component Services/Computers/My Computer and then DCOM Config.

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

FIGure 3: DCOM CONfIG COmPONeNt SerVICeS EdItOr

4. Locate Microsoft Excel Application, then right click the component and click Properties.

5. In the Microsoft Excel Application Properties dialog, click the Identity tab and make sure The Interactive user option is
selected.

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

FIGure 4: THe INteraCtIVe USer IdeNtItY OPtION

6. Click Apply then OK to accept the changes.

7. Return to the Configurator and click Refresh to resume configuration.

8. Populate the Historian Data Source and Historian Configuration fields, then click Configure.

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

FIGure 5: CONfIGure HIStOrIaN Data SOurCe aNd CONfIGuratION FIeLdS

The ActiveFactory Reporting configuration should now finish successfully (Figure 6 below).

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting

FIGure 6: CONfIGuratION SuCCeSS

file:///C|/inetpub/wwwroot/t002738/t002738.htm[2/15/2013 2:41:43 PM]

Resolving Issue: The Microsoft Excel Application component is missing additional configuration required for ActiveFactory Reporting
B. Nguyen

Tech Notes are published occasionally by Wonderware Technical Support. Publisher: Invensys Systems, Inc., 26561 Rancho Parkway South, Lake Forest, CA 92630. There is also
technical information on our software products at Wonderware Technical Support.

For technical support questions, send an e-mail to [email protected].

©2013 Invensys Systems, Inc. All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying, recording, broadcasting, or by anyinformation storage and retrieval system, without permission in writing from Invensys Systems, Inc.
Terms of Use.