Handle the projector correctly in accordance with the

user’s manual to ensure safe use.

FUJIFILM SX800
Warning
FUJIFILM Corporation *Product specifications, appearance, price, etc. are subject to change
without advance notice.
Domestic Sales Group, Optical Device & Electronic Imaging Products Division *Product colors in this catalog may dif fer in appearance from the actual
For further information, go to https://optics.fujifilm.com/security/en/contact/ product due to photography and printing conditions.

FFBX-2020.03-M-K-01
 Supporting various interfaces
to enable diverse system administration
The SX800 supports both serial communications [RS485] and IP communications [ONVIF]
so that it can be incorporated into customers’ existing systems in place. The RS485 protocol
supports Pelco-D / Pelco-P* and can be downloaded from the FUJIFILM website.
Advanced Safety,
Security and Quality
Serial IP communications Mobile system
FUJIFILM has brought together communications
ON ON
(ONVIF) ON
(stand-alone)
its optical technology, developed over (RS485)
many years, and unique image processing 1 2 3 4 1 2 3 4 1 2 3 4
OFF OFF OFF
technology to offer a new solution
in long-range surveillance systems. HDMI
ONVIF
HD-SDI
Or

VIDEO

Pelco-D/P compatible ONVIF-compatible Monitor

Monitor remote controller remote controller
Computer

HDMI
RS485
HD-SDI
(Pelco-D/P) connection IP connection
VIDEO

SX800 Remote controlled platform

SX800
RS485 (Pelco-D/P)
connection Rear panel
SX800 Remote controlled platform

*Technical information can be downloaded from the website.

https://optics.fujifilm.com/security/en/support/
 Evolving systems and technologies
Evolving systems and technologies

Long-range
01 surveillance 02 High-performance image stabilization 03 High-speed AF system 04 Image processing technology
40x optical zoom New image stabilization system High-performance EIS On-sensor phase detection AF Low light conditions
The SX800 is equipped with a 40x optical zoom lens that The SX800 combines optical image stabilization (OIS) and electronic image In the EIS mode, the SX800 uses a sensor large enough for its lens’s effective The on-sensor phase detection AF uses phase detection pixels across the sensor to The use of the highly sensitive sensor and the effect
covers a broad range of focal lengths from 20mm on stabilization (EIS) to accurately compensate for camera shake, typically caused diameter to secure full HD resolution (1920 x 1080), thereby delivering footage of instantaneously measure distance according to the displacement of incident lights. of advanced noise reduction mean the SX800 can
the wide angle end to 800mm on the telephoto end. It is by gusts and footing vibrations at the site of camera installation. The system is premium quality. The combined use with OIS also improves the durability of the The SX800 also offers “contrast AF,” which detects areas of high contrast in images at shoot clear footage with minimal noise even in low
complemented with 1.25x digital zoom to achieve particularly effective when shooting in the ultra-telephoto range, which is image stabilization system substantially. high accuracy, and automatically switches to the optimum AF setting. light conditions.
long-range surveillance equivalent to 1000m in focal susceptible to even the slightest of shakes.
length.

Full HD(1920×1080) Recording area ISO 400 ISO 204800

1

3
Fog reduction
1. Micro lens
The SX800 uses a unique imaging technology to bring
2. Color filter
vivid clarity to hazy images caused by light diffusion
General sensor SX800's sensor 3. Phase detection filter
5
with airborne mist droplets and dust.
Without image stabilization With image stabilization 4 4. Phase detection pixels
5. Photo diode

20mm

Use of new devices New ceramic bead Fog reduction OFF Fog reduction ON
Rear Focus mechanism
The SX800 sports high-precision gyro sensors to accurately detect minute roller system
vibrations that could not be detected previously. The use of newly-developed The use of the Rear Focus mechanism has significantly reduced the weight of the
The SX800’s OIS uses a unique “ceramic
high-thrust linear motor delivers an advanced level of accuracy and tracking
bead roller” system. Ceramic beads,
focusing lens group. This has also dramatically increased the focus drive speed to Heat haze reduction
performance. enable “continuous AF.” Users can choose between “Continuous AF,” “Quick AF” and
processed in ultimate precision, The SX800 uses a unique image processing technology to reduce the shimmering effect of heat haze,
“Manual Focus” according to the conditions where the camera is used.
minimizes friction and resistance to caused by large difference in atmospheric temperatures, to make the entire images easier to see.
achieve advanced responsiveness and
excellent durability in image stabilization.

800mm

Link to the product introduction video.

Licensed by TOKYO TOWER

Evolving systems and technologies
Exterior view Main specifications of the long-range surveillance camera, SX800

Lens Network

05 Simplified setup Model name

Optical zoom
SX800

40x
Minimum object
distance (M.O.D) from
the front lens
10m (20 – 400mm in focal length)
20m (401 – 800mm in focal length)
Network protocols

Supported OS
ICMP, ARP, TCP / IP, UDP / IP,
HTTP, RTSP, RTP, DHCP, DNS

Windows 7/10
Digital zoom 1.25x
Angle of view W : 21.0° x 11.8°
Cameras with built-in lens 160 Focal length 20mm – 800mm [16:9 (H x V) ] T : 0.55° x 0.31° Supported browser Chrome71+, IE11

Maximum aperture ratio 1:4 (W), 1:7.4 (T) ONVIF support Yes (Profile S)
Conventional surveillance systems require the
adjustment of optical axis and flange focal Maximum number of 13 (simultaneously connected users)
156 410 11.4 connections
length when mounting a lens on a camera. The
SX800, which carries a built-in lens, is shipped
with such settings optimally adjusted to bring

M112x1
out maximum performance. The design also

139
eliminates the need for complicated wiring, Camera Miscellaneous

67.5
thereby significantly reducing man-hours at the Effective sensor size 1/1.8" Saturation Selectable (5 levels) Size (H x W x L) 139mm x 156mm x 410mm

time of installation. Minimum illumination Color 0.00015lux (at F1.2) / 0.0017lux (at F4.0) Sharpness Selectable (5 levels) Weight 6.4kg
B/W 0.0001ux (at F1.2) / 0.0011lux (at F4.0)
White balance Auto, Custom 1 – 2, Fine, Shade, Color Filter thread size M112 x 1mm
Focus settings Continuous AF, Quick AF, Manual Temperature (3000K, 5000K, 9000K)
Operating environment Temperature : -10℃ - +50℃
Iris Auto, Manual (Aperture range : F4 – F16) Video output systems NTSC, PAL Humidity: 10% – 80% (no condensation)

Shutter speed Auto (with minimum speed selection of 1/8 – Video format NTSC: 1080p, 720p, 480p / PAL: 1080p, 720p, Tilt limit 45 degrees upward – 45 degrees downward

28
1/125s), Manual (1 – 1/20,000s) 576p

06 Robustness 101010 69
14 14
126
101010
104.5
Gain

Optical filter
Manual, AGC, HYPER-AGC (Setting range:
ISO400 – 819200)

Visible Light Cut filter (ON / OFF)

Video output systems

Audio input / output

HDMI, HD-SDI, Composite(BNC)

Input impedance: 40kΩ

Output impedance: 200Ω

New design with Day / Night selection Auto, Manual External interfaces Ethernet(10Base -T, 100Base-TX, RJ45
connector), RS-485, External trigger (Day /
Wavelengths selection
advanced rigidity and •Use M4 screws with a thread engagement length of at
950nm, 940nm, 850nm, 808nm, Visible light Night)
Handle
portability CAUTIONS •
least 4 mm and a protrusion of no more than 6 mm.
Do not use the screw holes on top of the camera for
thickness
4mm
Image stabilization Auto, OIS, EIS, OFF Recording format File recording format : MOV
Compression format : H.264 compliant
any other purpose. Max.6mm Wide dynamic range Selectable (2 levels)
The SX800’s aluminum extrusion body is highly Audio recording format : Linear PCM stereo
(48kHz sampling)
rigid and exceptionally robust. A carrying handle* Back light correction Selectable (2 levels)
may be attached to the body, using screw holes RS-485 compatible Pelco-D / Pelco-P (including extended
Heat haze reduction Selectable (3 levels)
Screw Hole Specifications The specifications for the screw holes on the top and base of the camera are as follows: protocol commands)
at the top, for transporting convenience.
Fog reduction Selectable (3 levels)
Type Quantity Depth Tightening torque Power source DC12V
Top M4 2 Pass through (threaded depth 4 mm) 80–100 N•cm Noise reduction Selectable (3 levels)
Base 1/4”, UNC 20 thread 15 10 mm 240–300 N•cm Power consumption 9.5W
* FUJIFILM does not offer a carrying handle. Brightness Selectable (21 levels)
Supported SD card UHS-1-compatible 8GB+
Contrast Selectable (5 levels) (SDHC/SDXC) SD Speed Class 10 or above
Technical information can be downloaded from the website.
https://optics.fujifilm.com/security/en/support/ The product’ s design, specifications and exterior appearance are subject to change without notice.