LMR-195
TIMES MICROWAVE SYSTEMS
LMR -195 ®
Flexible Low Loss Communications Coax
Ideal for…
• Jumper Assemblies in Wireless Communications Systems
• Short Antenna Feeder runs
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• Drop-in replacement for RG-58 and RG-142
Part Description Stock Construction Specifications
Part Number Application Jacket Color Code Description Material In. (mm)
LMR-195 Outdoor PE Black 54110 Inner Conductor Solid BC 0.037 (0.94)
LMR-195-DB Outdoor/Watertight PE Black 54113 Dielectric Foam PE 0.110 (2.79)
LMR-195-FR Indoor/Outdoor Riser CMR FRPE Black 54111 Outer Conductor Aluminum Tape 0.116 (2.95)
LMR-195-FR-W Indoor/Outdoor Riser CMR FRPE White 54158 Overall Braid Tinned Copper 0.139 (3.53)
LMR-195-FR-PVC Indoor/Outdoor Riser CMR FRPVC Black 54105 Jacket (see table) 0.195 (4.95)
LMR-195-MA Mobile Antennas PVC Black 54210
LMR-195-PVC General Purpose PVC Black 54215
Electrical Specifications
LMR-195-PVC-W General Purpose PVC White 54199
Performance Property Units US (metric)
Environmental Specifications Velocity of Propagation % 80
Performance Property 0
F o
C Dielectric Constant NA 1.56
Installation Temperature Range -40/+185 -40/+85 Time Delay nS/ft (nS/m) 1.27 (4.17)
Storage Temperature Range -94/+185 -70/+85 Impedance ohms 50
Operating Temperature Range -40/+185 -40/+85 Capacitance pF/ft (pF/m) 25.4 (83.3)
Inductance uH/ft (uH/m) 0.064 (0.21)
Shielding Effectiveness dB >90
Mechanical Specifications
DC Resistance
Performance Property Units US (metric)
Inner Conductor ohms/1000ft (/km) 7.6 (24.9)
Bend Radius: installation in. (mm) 0.5 (12.7) Outer Conductor ohms/1000ft (/km) 4.9 (16.1)
Bend Radius: repeated in. (mm) 2.0 (50.8) Voltage Withstand Volts DC 1000
Bending Moment ft-lb (N-m) 0.2 (0.27) Jacket Spark Volts RMS 3000
Weight lb/ft (kg/m) 0.021 (0.03) Peak Power kW 2.5
Tensile Strength lb (kg) 40 (18.2)
Flat Plate Crush lb/in. (kg/mm) 15 (0.27)
Attenuation vs. Frequency (typical)
100.0
(db per 100 feet)
Attenuation
10.0
1.0
10 100 1,000 10,000
Frequency (MHz)
Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 8000
Attenuation dB/100 ft 2.0 2.5 4.4 5.4 7.8 11.1 14.5 16.0 16.9 19.0 29.9 35.7
Attenuation dB/100 m 6.5 8.4 14.6 17.7 25.5 36.5 47.7 52.5 55.4 62.4 98.1 117.1
Avg. Power kW 0.89 0.68 0.39 0.32 0.22 0.16 0.12 0.11 0.10 0.09 0.06 0.04
12 (800) TMS-COAX • www.timesmicrowave.com
LMR-195
TIMES MICROWAVE SYSTEMS
Connectors
Part Stock VSWR** Coupling
Inner Outer Finish*
Contact Contact Body Length Width Weight
Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
1. N Male Straight Plug TC-195-NMH-X 3190-2880 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) 0.073 (33.1)
2. N Male Right Angle TC-195-NMH-RA-D 3190-2425 <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.3 (32.1) 1.19 (30.1) 0.083 (37.5)
3. SMA Male Straight Plug TC-195-SM-SS-X 3190-2878 <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8)
4. TNC Male Straight Plug TC-195-TM-X 3190-2879 <1.25:1 (2.5) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4)
5. SMA Male Straight Plug EZ-195-SM-X 3190-6140 <1.30:1 (6) Hex Spring Finger Crimp A/G 0.9 (22.0) 0.37 (9.4) 0.019 (8.6)
6. BNC Male Straight Plug EZ-195-BM-X 3190-6141 <1.30:1 (4) Knurl Spring Finger Crimp A/G 1.1 28.4 0.60 (14.5) 0.045 (20.4)
7. TNC Male Reverse Polarity EZ-195-TM-RP-X3190-6142 <1.35:1 (6) Hex Spring Finger Crimp A/G 1.1 (28.3) 0.87 (22.0) 0.045 (20.4)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair
1 2 3 4
TC-195-NMH-X TC-195-SM-SS-X TC-195-TM-X
TC-195-NMH-RA-D 3190-2879
3190-2880 3190-2425 3190-2878
5 6 7
EZ-195-SM-X EZ-195-BM-X EZ-195-TM-RP-X
3190-6140 3190-6141 3190-6142
Install Tools
Type Part Number Stock Code Description
Crimp CT-240/200/195/100 3190-667 Crimp tool for LMR-100,195,
Tool 200 and 240 connectors
Cutting Tool CCT-02 3192-165 Cable end flush cut tool
Combination Strip Tool CST-195/200 3192-102 Prep tool for LMR-195/200
Deburr Tool DBT-U 3192-001 Removes center conductor
rough edges
Replacement RB-CST 3192-086 Replacement blade kit for
Blade Kit all CST cutting tools
DBT-U CCT-02 RB-CST
CT-240/200/195/100 - 3190-667 3192-001 3192-165 3192-086
CST-195/200
3192-102
Calculate Attenuation = (0.356859) • FMHz + (0.000470) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation: VSWR=1.0; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F);
Sea Level; dry air; atmospheric pressure; no solar loading
(800) TMS-COAX • www.timesmicrowave.com 13
