Scribd
Upload
17 views

Module - 4-4 - Multi-Stage Amplifiers

This document summarizes the key characteristics of single-transistor MOS amplifier configurations including common source (CS), common drain (CD), and common gate (CG). It then discusses how cascading multiple stages can help meet requirements like high input resistance, low output resistance, and high voltage gain that single stages cannot achieve alone. The document provides examples of two-stage voltage amplifiers using common-source configurations and techniques for bandwidth extension, as well as discussing the properties of cascode configurations and considerations for biasing multistage amplifiers.

Uploaded by

shoukatawaisali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Module - 4-4 - Multi-Stage Amplifiers

This document summarizes the key characteristics of single-transistor MOS amplifier configurations including common source (CS), common drain (CD), and common gate (CG). It then discusses how cascading multiple stages can help meet requirements like high input resistance, low output resistance, and high voltage gain that single stages cannot achieve alone. The document provides examples of two-stage voltage amplifiers using common-source configurations and techniques for bandwidth extension, as well as discussing the properties of cascode configurations and considerations for biasing multistage amplifiers.

Uploaded by

shoukatawaisali
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 24

EE105  

– Fall  2015
Microelectronic  Devices  and  Circuits
Multi-­Stage  Amplifiers

Prof.  Ming  C.  Wu  


[email protected]
511  Sutardja  Dai  Hall  (SDH)
Terminal  Gain  and  I/O  Resistances  of  MOS  
Amplifiers
Common  Source (CS) Common  Drain  (CD) Common  Gate  (CG)

gm RL RL AV ,t = gm RL
AV ,t = − AV ,t =
1+ gm RS 1
+ RL
Ri = ∞ gm 1
Ri = ∞ Ri =
Ro = #$ro (1+ gm RE )%& gm
1
AI,t = ∞ Ro = Ro = !"ro (1+ gm RE )#$
gm
AI,t ≈ 1
AI,t = ∞
Without degeneration:
Simply set RS = 0

For  the  gain,  Ri,  Ro of  the  whole  amplifier,  you  need  to  include  
voltage/current  dividers  at  input  and  output  stages
Summary  of  MOS  
Single-­Transistor  Amplifiers

MOS Common   Common   Common   Common  


Source Source Drain Gate
with  Deg.
Ri ∞ ∞ ∞ Small
Ro Large Very  Large Small Large
AV Moderate Small ~1 Moderate
fH Small Moderate Large Large
Single  Stage  Amplifier  Cannot  Meet  All  
Requirements
• For  example,  a  general  purpose  operational  
amplifier  requires
– High  input  resistance  ~  1MΩ
– Low  output  resistance  ~  100Ω
– High  voltage  gain  ~  100,000

• No  single  transistor  amplifier  can  satisfy  all  spec’s


• Cascading  multiple  stages  of  amplifiers  offers  a  
path  towards  the  design
Multistage  Amplifiers

• Usually
– An  input  stage  to  provide  required  input  resistance
– Middle  stage(s)  to  provide  gain
– An  output  stage  to  provide  required  output  resistance  or  
drive  external  loads

• More  gain  !
– Gain/stage  limited,  especially  in  nanoscale  devices

• Improve  Bandwidth
– De-­couple  high  impedance  nodes  from  large  capacitors

• DC  coupling  (no  passive  elements  to  block  the  


signal)
– Use  amplifiers  to  naturally  “level  shift”  signal
Impedance  “Match”

• On-­chip  circuits  often  use  “voltage/current”  


matching  to  minimize  loading
• Keep  in  mind  the  input  resistance  and  output  
resistance  of  each  type  of  stage  so  that  the  
loading  does  not  create  an  undesired  effect  

Ideal Rin Ideal Rout


Voltage  Amplifier ∞ 0
Current  Amplifier 0 ∞
Transconductance Amplifier ∞ ∞
Transresistance Amplifier 0 0
Two-­Stage  Voltage  Amplifier

• Boost  gain  by  cascading  Common-­Source  stages

CS1 CS2

CS1,2

Can  combine  into  a  single  2-­port  model


Results  of  new  2-­port:      Rin =  Rin1, Rout =  Rout2
CS  Cascade  Analysis

vin gm1vin vint gm2vint vout

Results  of  new  2-­port:      


Rin = Rin1 =
Rout = Rout2 =
AV = vout/vin =
CS  Cascade  Bandwidth

vin gm1vin vint gm2vint vout

Two  time  constants:


τ1 =
τ2 =
Bandwidth  Extension

• Common  Source  stage  has  high  gain,  but  low  


bandwidth
• Note  that  Miller  effect  is  the  culprit
• Follower  stage  can  buffer  source  resistance  from  
Miller  cap
Bandwidth  Extension  Using  
Source  Follower  (SF)
COMMON  SOURCE COMMON  DRAIN COMMON  SOURCE          

vin gm1vin vint gm2vint vout


CS  Example  with  Cap  Load

• Cin and  CS are  very  large,  therefore  they  look  like  short  
circuits  to  the  AC  signal.
• If  CL is  very  large,  its  pole  dominates,  let’s  analyze
CS  with  Cap  Load  – Small  Signal

Rd

R2//Rg1//Rg2~R2

• What  are  the  time  constants  associated  with  the  capacitors  in  
this  circuit?
• What  can  we  do  if  we  have  to  drive  a  large  CL?
CS  with  Cap  Load  – Bandwidth

• How  can  we  reduce  the  impact  of  CL?


• One  way  is  to  reduce  the  resistance  Rd,  but  this  reduces  our  
low-­frequency  gain
• To  recover  the  gain  we  can  increase  gm1.  
What  does  this  cost  us?
CS  with  Cap  Load  – BW  Extension

• A  better  way  to  extend  the  bandwidth  is  to  add  a  source-­
follower  stage.
• Similar  to  previous  example
CS  with  Cap  Load  – BW  Extension
1/gm2

vin gm1vin vint vint

• By  adding  a  CD  (Source  Follower)  we  can  increase  the  


bandwidth
• It  costs  us  power  for  the  CD  stage
• Remember  that  increasing  the  BW  by  increasing  gm1 costs  us  
much  more
CS  +  CG

• Common  source  provides  gain,  CG  acts  as  a  buffer,  


but  is  it  even  helping?
• How  do  you  bias  this  circuit?
Merged  CS  +  CG  =  Cascode
• Let’s  apply  2-­port  small-­signal  analysis

vout

vint

• In  this  case,  we  care  about  the  input  current  to  the  second  stage
• Note  that  the  input  resistance  of  the  CG  is  low,  therefore  the  
majority  of  the  CS  current  is  fed  to  the  CG
• Av  =
Cascode  Bandwidth
• Draw  in  the  Cgs and  Cgd capacitors.
• Which  ones  are  Miller  effected?
• Is  this  better  or  worse  than  a  CS  without  a  CG?
Cascode  Bandwidth

• Draw  in  the  capacitors  and  input  resistance

vout

vint
Cascode  Biasing
l CG  has  a  very  large  output  resistance
l Loading  it  with  RD is  likely  to  reduce  the  voltage  gain
l We  can  increase  the  gain  by  using  a  current  source  load,  but  roc
needs  to  be  very  large.  Can  use  a  cascode  current  mirror!
Complete  Amplifier  Design

Goals: gm1 = 1 mS, Rout =5 MW


For simplicity, let’s assume all gm and ro values are equal

AV ≈ −gm1Rout = −1mS * 5MΩ = −5, 000


1
Rout ≈ gm ro2 = 5MΩ
2
20MΩ 10MΩ
ro = = = 100kΩ
gm 1mS
Bias  Current  &  Device  Sizing
Need  to  know  process  parameters  to  solve  for  W/L
k’  =  100  μA/V2
λ =  0.1 [V-­1]
1
ro = = 100kΩ
λ I DS
1
I DS = = 100µ A
.1V *100kΩ
−1

⎛W ⎞
gm = 2k ' ⎜ ⎟ I DS = 1mS
⎝L⎠
W gm2 (1mS)2
= = = 50
L 2k ' I DS 2 *100µ *100µ A
Output  (Voltage)  Swing

Need to know VGS – VT (e.g. VDSAT , VOV)

2I DS
gm = = 1mS
VGS −VT
2I DS 2 *100µ A
VGS −VT = = = 0.2V
gm 1mS

Maximum VOUT =
Minimum VOUT =
Input Bias VIN =

You might also like