Scribd
Upload
229 views

Digital Logic Syllabus

This document outlines the details of a course on digital logic, including the course title, code, nature, semester, description, objectives, contents, textbook, and laboratory works. The course covers concepts of digital logic and switching networks like boolean algebra, logic gates, simplification of boolean functions, combinational and sequential logic, registers, counters, and more. The main objective is to introduce tools for digital circuit design and methods for a variety of applications. The course contains 7 units and assessment is based on exams, with full marks of 60+20+20 and pass marks of 24+8+8.

Uploaded by

Neha Don
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
229 views

Digital Logic Syllabus

This document outlines the details of a course on digital logic, including the course title, code, nature, semester, description, objectives, contents, textbook, and laboratory works. The course covers concepts of digital logic and switching networks like boolean algebra, logic gates, simplification of boolean functions, combinational and sequential logic, registers, counters, and more. The main objective is to introduce tools for digital circuit design and methods for a variety of applications. The course contains 7 units and assessment is based on exams, with full marks of 60+20+20 and pass marks of 24+8+8.

Uploaded by

Neha Don
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Digital Logic

Course Title: Digital Logic Full Marks: 60 + 20 + 20


Course No: CSC111 Pass Marks: 24 + 8 + 8
Nature of the Course: Theory + Lab Credit Hrs: 3
Semester: I

Course Description: This course covers the concepts of digital logic and switching networks.
The course includes the fundamental concepts of boolean algebra and its application for circuit
analysis, multilevel gates networks, flip-lops, counters logic devices and synchronous and
asynchronous sequential logic and digital integrated circuits.

Course Objectives: The main objective of this course is to introduce the basic tools for the
design of digital circuits and introducing methods and procedures suitable for a variety of digital
design applications.

Course Contents:
Unit 1: Binary Systems (6 Hrs.)
Digital Systems, Binary numbers, Number base conversion, Octal and hexadecimal numbers,
compliments, Signed Binary numbers, Decimal codes (BCD, 2 4 2 1,8 4 -2 -1,Excess 3, Gray
Code), Binary Storage and Registers, Binary logic

Unit 2: Boolean algebra and Logic Gates (5 Hrs.)


Basic and Axiomatic definitions of Boolean algebra, Basic Theorems and properties of Boolean
Algebra, Boolean Functions, Logic Operations, Logic Gates, Integrated Circuits

Unit 3: Simplification of Boolean Functions (5 Hrs.)


K-map, Two and Three variable maps, Four variable maps, product of sum simplification,
NAND and NOR implementation, Don't Care conditions, Determinant and selection of Prime
Implicants

Unit 4: Combinational Logic (5 Hrs.)


Design Procedure, Adders, Subtractors, Code Conversions, Analysis Procedure, Multilevel
NAND and NOR Circuits, Exclusive-OR Circuits

Unit 5: Combinational Logic with MSI and LSI (8 Hrs.)


Binary Parallel Adder and Subtractor, Decimal Adder, Magnitude Comparator, Decoders and
Encoders, Multiplexers, Read-only-Memory (ROM), Programmable Logic Array (PLA),
Programmable Array Logic (PAL)

Unit 6: Synchronous and Asynchronous Sequential Logic (10 Hrs.)


Flip-Flops, Triggering of flip-flops, Analysis of clocked sequential circuits, Design with state
equations and state reduction table, Introduction to Asynchronous circuits, Circuits with latches.

Downloaded from CSIT Tutor


Unit 7: Registers and Counters (6 Hrs.)
Registers, Shift registers, Ripple Counters, Synchronous Counters, Timing Sequences, The
memory

Laboratory Works:
Students should be able to realize following digital logic circuits as a part of laboratory work.

 Familiarizations with logic gates


 Combinatorial Circuits
 Code Converters
 Design with Multiplexers
 Adders and Subtractors
 Flip-Flops
 Sequential Circuits
 Counters
 Clock Pulse Generator

Text Books:
1. M. Morris Mano, “Digital Logic & Computer Design”

Reference Books:

1. Brain Holdsworth, “Digital Logic Design”, Elsevier Science.


2. John Patrick Hayes, “Introduction to Digital Logic Design”, Addison-Wesley.
3. M. Morris Mano and Charles Kime, “Logic and Computer Design Fundamentals”,
Pearson New International.

Downloaded from CSIT Tutor

You might also like