Smart Machine Smart Decision

3.2 Detailed Descriptions of AT Command According to 3GPP TS 27.007

3.2.1 AT+CGMI Request Manufacturer Identification

AT+CGMI Request Manufacturer Identification

ile
Test Command Response
AT+CGMI=? OK

lF
Execution Response
Command TA returns manufacturer identification text.
AT+CGMI <manufacturer>

ia
OK
Parameters
<manufacturer> The ID of manufacturer

t
en
Parameter Saving NO_SAVE
Mode
Max Response -
Time
id
Reference Note
3GPP TS 27.007
f
[13]
on

3.2.2 AT+CGMM Request Model Identification

AT+CGMM Request Model Identification

C

Test Command Response

AT+CGMM=? OK
Execution Response
om

Command TA returns product model identification text.

AT+CGMM <model>

OK
C

Parameters
<model> Product model identification text
Parameter Saving NO_SAVE
M

Mode
Max Response -
SI

Time
Reference Note
3GPP TS 27.007
[13]

SIM7080 Series_AT Command Manual_V1.02 39 2020-02-26

 Smart Machine Smart Decision
3.2.3 AT+CGMR Request TA Revision Identification of Software Release

AT+CGMR Request TA Revision Identification of Software Release

Test Command Response
AT+CGMR=? OK

ile
Execution Response
Command TA returns product software version identification text.
AT+CGMR Revision: <revision>

lF
OK
Parameters
<revision> Product software version identification text

ia
Parameter Saving NO_SAVE
Mode

t
Max Response -

en
Time
Reference Note
3GPP TS 27.007
[13]
id
3.2.4 AT+CGSN Request Product Serial Number Identification
f
on

AT+CGSN Request Product Serial Number Identification (Identical with +GSN)

Test Command Response
AT+CGSN=? OK
C

Execution Response
Command see +GSN
AT+CGSN <sn>
om

OK
Parameters
<sn> International mobile equipment identity (IMEI)
Parameter Saving NO_SAVE
C

Mode
Max Response -
M

Time
Reference Note
3GPP TS 27.007
SI

[13]

3.2.5 AT+CSCS Select TE Character Set

AT+CSCS Select TE Character Set

SIM7080 Series_AT Command Manual_V1.02 40 2020-02-26

 Smart Machine Smart Decision
Test Command Response
AT+CSCS=? +CSCS: (list of supported <chset>s)

OK
Parameters

ile
<chset> "GSM" GSM 7 bit default alphabet (3GPP TS 23.038);
"UCS2" 16-bit universal multiple-octet coded character set
(ISO/IEC10646); UCS2 character strings are converted to

lF
hexadecimal numbers from 0000 to FFFF; e.g.
"004100620063" equals three 16-bit characters with decimal
values 65, 98 and 99
"IRA" International reference alphabet (ITU-T T.50)

ia
Read Command Response
AT+CSCS? +CSCS: <chset>

t
en
OK
Parameters
See Test Command
Write Command Response
id
AT+CSCS=<chse Sets which character set <chset> are used by the TE. The TA can then
t> convert character strings correctly between the TE and ME character sets.
f
OK
on

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
See Test Command
C

Parameter Saving NO_SAVE

Mode
om

Max Response -
Time
Reference Note
3GPP TS 27.007
[13]
C

3.2.6 AT+CIMI Request International Mobile Subscriber Identity

M

AT+CIMI Request International Mobile Subscriber Identity

Test Command Response
SI

AT+CIMI=? OK
Execution Response
Command TA returns <IMSI>for identifying the individual SIM which is attached to
AT+CIMI ME.
<IMSI>

SIM7080 Series_AT Command Manual_V1.02 41 2020-02-26

 Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters

ile
<IMSI> International Mobile Subscriber Identity (string without
double quotes)
Parameter Saving NO_SAVE

lF
Mode
Max Response 20s
Time

ia
Reference Note
3GPP TS 27.007
[13]

t
en
3.2.7 AT+CLCK Facility Lock

AT+CLCK Facility Lock

Test Command Response
id
AT+CLCK=? +CLCK: (list of supported <fac>s)
f
OK
on

Parameters
See Write Command
Write Command Response
C

AT+CLCK=<fac> This Command is used to lock, unlock or interrogate a ME or a network

,<mode>[,<passw facility <fac>. Password is normally needed to do such actions. When
d>[,<class>]] querying the status of a network service (<mode>=2) the response line for
om

‘not active’ case (<status>=0) should be returned only if service is not

active for any <class>.

If <mode>≠2 and Command is successful

OK
C

If <mode>=2 and Command is successful

+CLCK: <status>[,<class1>[<CR><LF>+CLCK:
M

<status>,<class2>[…]]

OK
SI

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
<fac>
"AB" All Barring services(only for <mode>=0)

SIM7080 Series_AT Command Manual_V1.02 42 2020-02-26

 Smart Machine Smart Decision
"AC" All inComing barring services(only for <mode>=0)
"AG" All outGoing barring services(only for <mode>=0)
"AI" BAIC (Barr All Incoming Calls)
"AO" BAOC (Barr All Outgoing Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming

ile
outside the home country)
"OI" BOIC (Barr Outgoing International Calls)
"OX" BOIC-exHC (Barr Outgoing International Calls except

lF
to Home Country)
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks password
in MT power-up and when this lock command issued) Correspond to
PIN1 code.

ia
"FD" SIM card or active application in the UICC (GSM or
USIM) fixed dialling memory feature (if PIN2 authentication has not

t
been done during the current session, PIN2 is required as <passwd>)

en
"PN" Network Personalization, Correspond to NCK code
"PU" Network subset Personalization Correspond to NSCK
code
"PP" Service Provider Personalization Correspond to SPCK
id
code
<mode> 0 unlock
f
1 lock
on

2 query status
<passwd> String type (Shall be the same as password specified for the
facility from the MT user interface or with command Change Password
+CPWD)
C

<class> 1-255
1 Voice (telephony)
2 Data refers to all bearer services; with <mode>=2 this
om

may refer only to some bearer service if TA does not support values 16, 32,
64 and 128)
4 Fax (facsimile services)
7 All classes
<status> 0 Not active
C

1 Active
Parameter Saving NO_SAVE
M

Mode
Max Response 15s
SI

Time
Reference Note
3GPP TS 27.007  CME errors if SIM not inserted or PIN is not entered.
[14]

SIM7080 Series_AT Command Manual_V1.02 43 2020-02-26

 Smart Machine Smart Decision
3.2.8 AT+CMEE Report Mobile Equipment Error

AT+CMEE Report Mobile Equipment Error

Test Command Response
AT+CMEE=? +CMEE: (list of supported <n>s)

ile
OK
Parameters

lF
See Write Command
Read Command Response
AT+CMEE? +CMEE: <n>

ia
OK
Parameters

t
See Write Command

en
Write Command Response
AT+CMEE=[<n> TA disables or enables the use of result code +CME ERROR: <err> as
] an indication of an error relating to the functionality of the ME.
OK
id
If error is related to ME functionality:
+CME ERROR: <err>
f
Parameters
on

<n> 0 Disable +CME ERROR: <err> result code and use

ERROR instead.
1 Enable +CME ERROR: <err> result code and use numeric
C

<err>
2 Enable +CME ERROR: <err> result code and use
verbose <err> values
om

Parameter Saving NO_SAVE

Mode
Max Response -
Time
Reference Note
C

3GPP TS 27.007
[13]
M

3.2.9 AT+COPS Operator Selection

SI

AT+COPS Operator Selection

Test Command Response
AT+COPS=? TA returns a list of quadruplets, each representing an operator present in
the network. Any of the formats may be unavailable and should then be an
empty field. The list of operators shall be in order: home network,

SIM7080 Series_AT Command Manual_V1.02 44 2020-02-26

 Smart Machine Smart Decision
networks referenced in SIM, and other networks.

+COPS: (list of supported<stat>,long alphanumeric<oper>,short

alphanumeric<oper>,numeric <oper>,<netact>)s[,,(list of supported
<mode>s),(list of supported <format>s)]

ile
OK
If error is related to ME functionality:

lF
+CME ERROR: <err>
Parameters
See Write Command

ia
Read Command Response
AT+COPS? TA returns the current mode and the currently selected operator. If no
operator is selected,<format> and <oper> are omitted.

t
+COPS: <mode>[,<format>,<oper>,<netact>]

en
OK
If error is related to ME functionality:
+CME ERROR: <err>
id
Parameters
See Write Command
f
Write Command Response
on

AT+COPS=<mo TA forces an attempt to select and register the GSM network operator. If
de>,[<format>[,< the selected operator is not available, no other operator shall be selected
oper>]] (except <mode>=4). The selected operator name format shall apply to
C

further read commands (AT+COPS?).

OK
If error is related to ME functionality:
om

+CME ERROR: <err>

Parameters
<stat> 0 Unknown
1 Operator available
C

2 Operator current
3 Operator forbidden
M

<oper> Refer to [27.007]

operator in format as per <format>
<mode> 0 Automatic mode; <oper> field is ignored
SI

1 Manual (<oper> field shall be present, and <AcT>

optionally)
2 manual deregister from network
3 set only <format> (for read Command +COPS?) - not
shown in Read Command response

SIM7080 Series_AT Command Manual_V1.02 45 2020-02-26

 Smart Machine Smart Decision
4 Manual/automatic (<oper> field shall be present); if
manual selection fails, automatic mode (<mode>=0) is
entered
<format> 0 Long format alphanumeric <oper>
1 Short format alphanumeric <oper>

ile
2 Numeric <oper>; GSM Location Area Identification
number
<netact> 0 User-specified GSM access technology

lF
1 GSM compact
3 GSM EGPRS
7 User-specified LTE M1 A GB access technology
9 User-specified LTE NB S1 access technology

ia
Parameter Saving AUTO_SAVE
Mode

t
Max Response Test command: 45 seconds

en
Time Write command: 120 seconds
Reference Note
3GPP TS 27.007
[14]
id
3.2.10 AT+CPAS Phone Activity Status
f
on

AT+CPAS Phone Activity Status

Test Command Response
AT+CPAS=? +CPAS: (list of supported <pas>s)
C

OK
Parameters
See Execution Command
om

Execution Response
Command TA returns the activity status of ME.
AT+CPAS +CPAS: <pas>
C

OK
If error is related to ME functionality:
M

+CME ERROR: <err>

Parameters
<pas>
SI

0 Ready (MT allows commands from TA/TE)

3 Ringing (MT is ready for commands from TA/TE, but the ringer
is active)
4 Call in progress (MT is ready for commands from TA/TE, but a
call is in progress)

SIM7080 Series_AT Command Manual_V1.02 46 2020-02-26

 Smart Machine Smart Decision
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note

ile
3GPP TS 27.007
[13]

lF
3.2.11 AT+CPIN Enter PIN

AT+CPIN Enter PIN

Test Command Response

ia
AT+CPIN=? OK
Read Command Response

t
AT+CPIN? TA returns an alphanumeric string indicating whether some password is

en
required or not.
+CPIN: <code>

OK
id
Parameters
<code>
f
READY MT is not pending for any password
on

SIM PIN MT is waiting SIM PIN to be given

SIM PUK MT is waiting for SIM PUK to be given
PH_SIM PIN ME is waiting for phone to SIM card (antitheft)
C

PH_SIM PUK ME is waiting for SIM PUK (antitheft)

PH_NET PIN ME is waiting network personalization password
to be given
SIM PIN2 PIN2, e.g. for editing the FDN book possible only
om

if preceding Command was acknowledged with +CME

ERROR:17
SIM PUK2 Possible only if preceding Command was
acknowledged with error +CME ERROR: 18.
C

Write Command Response

AT+CPIN=<pin>[ TA stores a password which is necessary before it can be operated (SIM
M

,<new pin>] PIN, SIM PUK, PH-SIM PIN, etc.).

If the PIN required is SIM PUK or SIM PUK2, the second pin is required.
This second pin <new pin>, is used to replace the old pin in the SIM.
SI

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<pin> String type; password

SIM7080 Series_AT Command Manual_V1.02 47 2020-02-26

 Smart Machine Smart Decision
<new pin> String type; If the PIN required is SIM PUK or SIMPUK2:
new password
Parameter Saving NO_SAVE
Mode
Max Response 5s

ile
Time
Reference Note
3GPP TS 27.007

lF
[13]

3.2.12 AT+CPWD Change Password

ia
AT+CPWD Change Password
Test Command Response

t
AT+CPWD=? TA returns a list of pairs which present the available facilities and the

en
maximum length of their password.
+CPWD: (list of supported <fac>s,list of supported <pwdlength>s)

OK
id
Parameters
<fac> See Write Command
f
<pwdlength> Integer max. length of password
on

Write Command Response

AT+CPWD=<fac TA sets a new password for the facility lock function.
>,<oldpwd>,<new OK
C

pwd> Parameters
<fac>
"AB" All Barring services
om

"AC" All inComing barring services(only for <mode>=0)

"AG" All outGoing barring services(only for <mode>=0)
"AI" BAIC (Barr All Incoming Calls)
"AO" BAOC (Barr All Outgoing Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming
C

outside the home country)

"OI" BOIC (Barr Outgoing International Calls)
M

"OX" BOIC-exHC (Barr Outgoing International Calls

except to Home Country)
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks
SI

password in MT power-up and when this lock

command issued) Correspond to PIN1 code.
"P2" SIM PIN2
<oldpwd> String type (string should be included in quotation marks):
password specified for the facility from the user interface or with

SIM7080 Series_AT Command Manual_V1.02 48 2020-02-26

 Smart Machine Smart Decision
command. If an old password has not yet been set,<oldpwd> is not to
enter.
<newpwd> String type (string should be included in quotation marks):
new password
Parameter Saving NO_SAVE

ile
Mode
Max Response 15s
Time

lF
Reference Note
3GPP TS 27.007
[13]

ia
3.2.13 AT+CRC Set Cellular Result Codes for Incoming Call Indication

t
AT+CRC Set Cellular Result Codes for Incoming Call Indication

en
Test Command Response
AT+CRC=? +CRC: (list of supported <mode>s)

OK
id
Parameters
See Write Command
f
Read Command Response
on

AT+CRC? +CRC: <mode>

OK
C

Parameters
See Write Command
Write Command Response
om

AT+CRC=[<mod TA controls whether or not the extended format of incoming call

e>] indication is used.
OK
Parameters
<mode> 0 Disable extended format
C

1 Enable extended format

Omitted Use previous value
M

Unsolicited Result Code

When enabled, an incoming call is indicated to the TE with unsolicited
result code +CRING: <type> instead of the normal RING.
SI

Parameters
<type> ASYNC Asynchronous transparent
SYNC Synchronous transparent
REL ASYNC Asynchronous non-transparent

SIM7080 Series_AT Command Manual_V1.02 49 2020-02-26

 Smart Machine Smart Decision
REL SYNC Synchronous non-transparent
FAX Facsimile
VOICE Voice
Parameter Saving NO_SAVE
Mode

ile
Max Response -
Time
Reference Note

lF
3GPP TS 27.007
[13]

ia
3.2.14 AT+CREG Network Registration

AT+CREG Network Registration

t
Test Command Response

en
AT+CREG=? +CREG: (list of supported <n>s)

OK
Parameters
id
See Write Command
Read Command Response
f
AT+CREG? TA returns the status of result code presentation and an integer <stat>
on

which shows whether the network has currently indicated the registration
of the ME. Location information elements <lac> and <ci> are returned
only when <n>=2 and ME is registered in the network.
C

+CREG: <n>,<stat>[,<lac>,<ci>,<netact>]

OK
If error is related to ME functionality:
om

+CME ERROR: <err>

Write Command Response
AT+CREG[=<n> TA controls the presentation of an unsolicited result code +CREG: <stat>
] when <n>=1 and there is a change in the ME network registration status.
C

OK
Parameters
M

<n> 0 Disable network registration unsolicited result code

1 Enable network registration unsolicited result code
+CREG: <stat>
SI

2 Enable network registration unsolicited result code with

location information(2 is only for 7000 series module
which support GPRS.)
CREG: <stat>[,<lac>,<ci>,<netact>]
<stat> 0 Not registered, MT is not currently searching a new

SIM7080 Series_AT Command Manual_V1.02 50 2020-02-26

 Smart Machine Smart Decision
operator to register to
1 Registered, home network
2 Not registered, but MT is currently searching a new
operator to register to
3 Registration denied

ile
4 Unknown
5 Registered, roaming
<lac> String type (string should be included in quotation marks);

lF
two byte location area code in hexadecimal format
<ci> String type (string should be included in quotation marks);
two byte cell ID in hexadecimal format
<netact> 0 User-specified GSM access technology

ia
1 GSM compact
3 GSM EGPRS

t
7 User-specified LTE M1 A GB access technology

en
9 User-specified LTE NB S1 access technology
Unsolicited Result Code
If <n>=1 and there is a change in the MT network registration status
+CREG: <stat>
id
If <n>=2 and there is a change in the MT network registration status or a
change of the network cell:
f
+CREG: <stat>[,<lac>,<ci>,<netact>]
on

Parameters
See Write Command
Parameter Saving -
C

Mode
Max Response -
Time
om

Reference Note
3GPP TS 27.007
[13]

3.2.15 AT+CRSM Restricted SIM Access

C

AT+CRSM Restricted SIM Access

M

Test Command Response

AT+CRSM=? OK
Write Command Response
SI

AT+CRSM=<Co +CRSM: <sw1>,<sw2>[,<response>]

mmand>[,<fileId
>[,<P1>,<P2>,<P OK
3>[,<data>]]] ERROR
If error is related to ME functionality:

SIM7080 Series_AT Command Manual_V1.02 51 2020-02-26

 Smart Machine Smart Decision
+CME ERROR: <err>
Parameters
<Command>
176 READ BINARY
178 READ RECORD

ile
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD

lF
242 STATUS
All other values are reserved; refer GSM 11.11.
<fileId> Integer type; this is the identifier for an elementary data file on
SIM. Mandatory for every Command except STATUS

ia
<P1>,<P2>,<P3> Integer type, range 0 – 255
Parameters to be passed on by the ME to the SIM; refer GSM 11.11.

t
<data> Information which shall be written to the SIM (hex-decimal

en
character format)
<sw1>,<sw2> Integer type, range 0 - 255
Status information from the SIM about the execution of the actual
Command. These parameters are delivered to the TE in both cases, on
id
successful or failed execution of the Command; refer GSM 11.11.
<response> Response of a successful completion of the Command
f
previously issued (hexadecimal character format)
on

Parameter Saving NO_SAVE

Mode
Max Response -
C

Time
Reference Note
3GPP TS 27.007
GSM 11.11
om

3.2.16 AT+CSQ Signal Quality Report

AT+CSQ Signal Quality Report

C

Test Command Response

AT+CSQ=? +CSQ: (list of supported <rssi>s),(list of supported <ber>s)
M

OK
Execution Response
SI

Command +CSQ: <rssi>,<ber>

AT+CSQ
OK
If error is related to ME functionality:
+CME ERROR: <err>

SIM7080 Series_AT Command Manual_V1.02 52 2020-02-26

 Smart Machine Smart Decision
Execution Command returns received signal strength indication <rssi>
and channel bit error rate <ber> from the ME. Test Command returns
values supported by the TA.
Parameters
<rssi>

ile
0 -115 dBm or less
1 -111 dBm
2...30 -110... -54 dBm

lF
31 -52 dBm or greater
99 not known or not detectable
<ber> (in percent):
0...7 As RXQUAL values in the table in GSM 05.08 [20]

ia
subclause 7.2.4
99 Not known or not detectable

t
Parameter Saving NO_SAVE

en
Mode
Max Response -
Time
Reference Note
id
3GPP TS 27.007
[13]
f
on

3.2.17 AT+CPOL Preferred Operator List

AT+CPOL Preferred Operator List

C

Test Command Response

AT+CPOL=? +CPOL: (list of supported <index>s),(list of supported <format>s)

OK
om

Parameters
See Write Command
Read Command Response
AT+CPOL? +CPOL:
C

<index1>,<format>,<oper1>[,<GSM>,<GSM_compact>,<UTRAN>,<
E-UTRAN>][<CR><LF>+CPOL:
M

<index2>,<format>,<oper2>[,<GSM,<GSM_compact>,<UTRAN>,<E
-UTRAN>][…]]
SI

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

SIM7080 Series_AT Command Manual_V1.02 53 2020-02-26

 Smart Machine Smart Decision
Write Command Response
AT+CPOL=<ind OK
ex>[,<format>[,< If error is related to ME functionality:
oper>[<GSM>,< +CME ERROR: <err>
GSM_compact>, Parameters

ile
<UTRAN>,<E-U <index> Integer type: order number of operator in SIM preferred
TRAN>]]] operator list
<format> Indicates whether alphanumeric or numeric

lF
format used (see +COPS Command)
0 Long format alphanumeric <oper>
1 Short format alphanumeric <oper>
2 Numeric <oper>

ia
<oper> String type(string should be included in quotation marks)
<GSM> GSM access technology

t
0 Access technology is not selected

en
1 Access technology is selected
<GSM_compact> GSM compact access technology
0 Access technology is not selected
1 Access technology is selected
id
<UTRAN> UTRAN access technology
0 Access technology is not selected
f
1 Access technology is selected
on

<E-UTRAN> E-UTRAN access technology

0 Access technology is not selected
1 Access technology is selected
Parameter Saving -
C

Mode
Max Response -
Time
om

Reference Note
3GPP TS 27.007
[13]
C

3.2.18 AT+COPN Read Operator Names

AT+COPN Read Operator Names

M

Test Command Response

AT+COPN=? OK
SI

Execution Response
Command +COPN: <numeric1>,<alpha1>[<CR><LF>+COPN:
AT+COPN <numeric2>,<alpha2>[…]]

OK

SIM7080 Series_AT Command Manual_V1.02 54 2020-02-26

 Smart Machine Smart Decision
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<numericn> String type (string should be included in quotation marks):
operator in numeric format (see +COPS)

ile
<alphan> String type (string should be included in quotation marks):
operator in long alphanumeric format (see +COPS)
Parameter Saving NO_SAVE

lF
Mode
Max Response -
Time

ia
Reference Note
3GPP TS 27.007
[13]

t
en
3.2.19 AT+CFUN Set Phone Functionality

AT+CFUN Set Phone Functionality

Test Command Response
id
AT+CFUN=? +CFUN: (list of supported <fun>s),(list of supported <rst>s)
f
OK
on

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
C

See Write Command

Read Command Response
AT+CFUN? +CFUN: <fun>
om

OK
If error is related to ME functionality:
+CME ERROR: <err>
C

Parameters
See Write Command
Write Command Response
M

AT+CFUN=<fun OK
>[,<rst>] If error is related to ME functionality:
SI

+CME ERROR: <err>

Parameters
<fun>
0 Minimum functionality
1 Full functionality (Default)

SIM7080 Series_AT Command Manual_V1.02 55 2020-02-26

 Smart Machine Smart Decision
4 Disable phone both transmit and receive RF circuits.
5 Factory Test Mode
6 Reset
7 Offline Mode
<rst>

ile
0 Do not Reset the MT before setting it to <fun> power level.
1 Reset the MT before setting it to <fun> power level.
Parameter Saving -

lF
Mode
Max Response 10s
Time

ia
Reference Note
3GPP TS 27.007  The <fun> power level will be written to flash except minimum
[13] functionality.

t
 AT+CFUN=1,1 can be used to reset module purposely at

en
minimum/full functionality mode.
 Response string "OK" will be returned after module resets if baud
rate is set to fixed baud rate.
id
3.2.20 AT+CCLK Clock
f
AT+CCLK Clock
on

Test Command Response

AT+CCLK=? OK

Read Command Response

C

AT+CCLK? +CCLK: <time>

OK
om

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
See Write Command
C

Write Command Response

AT+CCLK=<tim OK
e> If error is related to ME functionality:
M

+CME ERROR: <err>

Parameters
SI

<time> String type(string should be included in quotation marks)

value; format is "yy/MM/dd,hh:mm:ss±zz", where characters indicate
year (two last digits),month, day, hour, minutes, seconds and time zone
(indicates the difference, expressed in quarters of an hour, between the
local time and GMT; range -47...+48). E.g. 6th of May 2010,00:01:52

SIM7080 Series_AT Command Manual_V1.02 56 2020-02-26

 Smart Machine Smart Decision
GMT+2 hours equals to "10/05/06,00:01:52+08".
Parameter Saving AUTO_SAVE
Mode
Max Response -
Time

ile
Reference Note
3GPP TS 27.007 Only time zone is auto saved.
[13]

lF
3.2.21 AT+CSIM Generic SIM Access

AT+CSIM Generic SIM Access

ia
Test Command Response
AT+CSIM=? OK

t
en
Write Command Response
AT+CSIM=<leng +CSIM: <length>,<response>
th>,<Command>
OK
id
If error is related to ME functionality:
+CME ERROR: <err>
f
on

Parameters
<length> Integer type: length of characters sent to the TE in
<Command> or <response> (i.e. twice the number of octets in the raw
data).
C

<Command> String type (string should be included in quotation

marks): hex format: GSM 11.11 SIM Command sent from the ME to the
SIM.
om

<response> String type(string should be included in quotation

marks): hex format: GSM 11.11 response from SIM to <Command>.
Parameter Saving NO_SAVE
Mode
C

Max Response -
Time
Reference Note
M

3GPP TS 27.007
[13]
SI

3.2.22 AT+CBC Battery Charge

AT+CBC Battery Charge

Test Command Response
AT+CBC=? +CBC: (list of supported <bcs>s),(list of supported <bcl>s),(<voltage>)

SIM7080 Series_AT Command Manual_V1.02 57 2020-02-26