EXCELLENCE IN SCAFFOLDING

BROCHURE edition 05/07.03

CONTENTS

At a glance 3

Construction / The essential advantages of the system 4-5

Assembly Frames 6

Decks 7

„Inside“ Access 7

„Outside“ Access 8

Intermediate Transom 8

Vertical Bracing 9

Base Jacks 9

Side Guards 10

Upper Scaffold Guard Rails 11

Guard Scaffold 11

Scaffold Extensions 12

Anchoring 13

Protective Roofing 14

Mobile Tower Accessories 14

Scaffold Spare Parts 15

Examples for Frame Scaffold UNI-CONNECT 70 16 - 17

The product range 18

www.mj-geruest.de 19

All dimensions and weights are non-binding guide values.

We reserve the right to change technical specifications.
Business will be conducted exclusively in accordance with our Terms and Conditions of Sale and Delivery. These conditions are
part of our General Terms and Conditions of Business. Place of business and jurisdiction is Plettenberg, Germany.
Extended reservation of property rights until full payment of all our outstanding accounts receivables.
At a glance:

UNI-CONNECT 70 is compatible with the SpeedyScaf system by Layher. Reasons in favour

The quick-assembly scaffold MJ UNI-CONNECT 70 has the overall approval of the
German Institute of Planning and Building Regulation, Berlin, approval number of UNI-CONNECT 70:
Z-8.1-872 for standard designs up to 24 m, plus jackscrew. For the assembly
frame made of steel 2.00 m x 1.09 m and the assembly frame made of aluminium
2.00 m x 0.73 m we have an official agreement certificate which confirms the Economic efficiency
through quick erection and dismantling
conformity with the approval Z-8.1-844.
High return on investment
Due to the wedge-lock system and the frames’ upper U-transom for easy hooking-in of the through long lifetime
decks the UNI-CONNECT system is comfortable in handling and saves time in erecting Safety
and dismantling. Furthermore these are the essential safety features of our system. through building inspectorate approval

Flexibility
The wedge-lock system with its specific and slant surface quality as the centre connecting
through bay lengths up to 4.14 m
element between frames, diagonales and guard rails causes a secure and stiffening
connection. The decks with 2 or 3 claws (depending on the width) ensure a safe absorption
of inherent and moving loads, reinforce the whole system and produce a stable connection
between the single scaffold bays.

UNI-CONNECT 70 is applicable according to Load Class 3 and can also be used as a

guard and roof guard scaffold.

The application of a canopy is proven in the standard version. Reasons in favour

A wide range of coordinated accessories offers a flexible system allowing a trouble-free
of MJ:
scaffold even at complicated objects.

Experience
UNI-CONNECT 70 is available in steel as well as in aluminium design.
based on more than 35 years of scaffold
production

Certified Quality Management

according to DIN EN ISO 9001
MEMBER COMPANY IN THE QUALITY PROTECTION/
GERMAN ASSOCIATION OF STEEL SCAFFOLD Highest Product Quality
SCAFFOLD CONSTRUCTION CONSTRUCTION “Made in Germany”

Continuity
in company development

Fair and customer-related

cooperation
 UNI-ConnecT
1 2 3

4
UNI-Connect
4 5 6

5
 Assembly Frames Length
m
Width
m
Weight
kg
Art.
No.

ASSEMBLY FRAME, STEEL 2.00 0.73 17.80 000853

Steel tube Ø 48.3 x 2.70 mm,
hot-dip galvanised, 1.50 0.73 16.40 000856
U-profile for locating decks. 1.00 0.73 12.80 000855
0.66 0.73 10.40 000446

ASSEMBLY FRAME, ALUMINIUM 2.00 0.73 8.60 000863

Tube Ø 48.3 x 4.00 mm,
otherwise as above. 1.00 0.73 5.40 000864
0.66 0.73 4.20 000459

ASSEMBLY FRAME 1.09 WIDE, STEEL 2.00 1.09 23.40 000858

Steel tube Ø 48.3 x 3.20 mm,
hot-dip galvanised, 1.50 1.09 20.20 000861
U-profile for locating decks. 1.00 1.09 15.90 000859
0.66 1.09 13.40 000456

ASSEMBLY FRAME 0.36 WIDE, STEEL 2.00 0.36 18.30 000876

For 1-board use. Steel tube Ø 48.3 mm,
hot-dip galvanised, for locating a 32 cm 1.00 0.36 10.60 000604
wide deck. 0.66 0.36 8.60 000605

SIDE BRACKET FRAME 2.00 0.73 22.00 000862

Steel tube Ø 48.3, hot-dip galvanised.
To be used to overcome problems due 2.00 1.09 24.00 000452
to horizontal protrusions in facade, e.g.
roof gutters.

WALK-THROUGH FRAME 2.20 1.50 31.50 003152

Steel tube Ø 48.3 mm, hot-dip galvanised.
To be used as a passageway and
a protection of pedestrians.

6
Decks Length
m
Width
m
Weight
kg
Art.
No.

STEEL DECK 0.73 0.32 6.20 000473

Hot-dip galvanised, perforated and
non-slip surface. Up to load class 6, 1.09 0.32 8.60 000472
depending on length. 1.57 0.32 11.90 000474
2.07 0.32 15.50 000475
2.57 0.32 19.00 000476
3.07 0.32 22.20 000477
4.14 0.32 32.00 000478

COMBI DECK 1.57 0.61 13.20 000481

WITH PLYWOOD PANEL
Water resistant surface, non-slip and 2.07 0.61 17.00 000482
lightweight. Veneer panels BFU 100 G-12 2.57 0.61 20.00 000483
(G-Guard, 12 mm thick).
Load class 3 (2.00 kN/m2). 3.07 0.61 23.00 000484

COMBI DECK 1.57 0.61 12.00 000519

WITH ALUMINIUM PANEL
With non-slip aluminium plank, weather 2.07 0.61 15.00 000521
resistant, lightweight and robust. 2.57 0.61 18.00 000522
Up to load class 4, depending on length.
3.07 0.61 20.00 000523

FULL ALUMINIUM DECK 3.07 0.61 21.4 000495

Lighter and easy to handle due to
its low height of 5 cm. 2.57 0.61 18.3 000496
Space-saving for storage and transport,
100% recyclable.

„Inside“ Access Length

m
Width
m
Weight
kg
Art.
No.

FULL ALUMINIUM ACCESS DECK 2.57 0.61 22.00 000486

With non-slip aluminium panel and internal
aluminium ladder. 3.07 0.61 25.00 000488
Weather resistant, lightweight and robust.

ACCESS LADDER 2.00 0.40 3.00 001323

Aluminium.

ACCESS LADDER 2.00 0.40 10.50 000172

Steel, hot-dip galvanised.

ALUMINIUM COMBI ACCESS DECK 2.57 0.61 24.00 000492

with plywood panel and aluminium ladder.
Water resistant top surface, non-slip and 3.07 0.61 29.00 000494
lightweight.

Veneer panels BFU 100 G-12 (G-Guard).

Load class 3 (2.00 kN/m2).

7
 „Outside“ Access Length
m
Width
m
Weight
kg
Art.
No.

STAIRCASE for 2.57 m bay 3.25 0.60 23.00 000419

Aluminium.
for 3.07 m bay 3.65 0.60 28.00 000420

STAIRCASE HANDRAIL, OUTSIDE for 2.57 m bay 3.25 16.00 003182

Steel, hot-dip galvanised.
for 3.07 m bay 3.65 16.50 003181

STAIRCASE HANDRAIL, INSIDE 11.50 000425

Steel, hot-dip galvanised.

STEP ACCESS PLATFORM BRACKET 0.50 0.30 7.50 000234

For erecting a self-contained staircase
extending in front of an existing scaffold.

Intermediate Transom Length

m
Width
m
Weight
kg
Art.
No.

STARTING TRANSOM 0.73 3.00 000595

Steel, for fixing decks or staircases
just above ground level.

U-TRANSOM 0.73 3.60 000594

U-profile with half couplers for
locating decks in any level. 1.09 6.50 000593

DECKING RAIL 1.00 4.50 000571

Steel, hot-dip galvanised.
With half couplers for locating decks on 2.00 9.00 000567
lattice beams and platform scaffolds.
3.00 13.50 000566
4.00 18.00 000568
5.00 22.50 000570
6.00 26.50 000572

8
Vertical Bracing Length
m
Width
m
Weight
kg
Art.
No.

DIAGONAL BRACE for 2.07 m bay 2.80 6.50 000554

with wedge-coupler
Steel tube Ø 42.4 mm for 2.57 m bay 3.20 7.00 000552
hot-dip galvanised, for 3.07 m bay 3.60 8.30 000553
with rotating wedge-coupler,
for strong bracing,
with possibility for adjustment.

HORIZONTAL BRACE for 2.07 m bay 2.07 9.30 000548

Steel tube Ø 48.3 mm
hot-dip galvanised, for 2.57 m bay 2.57 10.50 000550
with two welded-on half couplers. for 3.07 m bay 3.07 13.20 000551

Base Jacks Length

m
Width
m
Weight
kg
Art.
No.

BASE JACK 0.30 2.00 000318

For heavy loads.
Steel, with adjusting-nut, galvanised, 0.50 2.50 000319
fast-action thread with lock, 0.60 3.00 000320
base plate 150 mm x 150 mm.
Can also be used as head plate. 0.78 3.50 000321
1.00 4.50 000322

TILTING BASE JACK 0.50 3.10 000323

See base jacks above,
but with swivelling base plate.
Additional longitudinal scaffold
bracing at base required.

ADJUSTMENT TUBE 1.80 5.80 000402

For levelling uneven ground.
To be used in conjuction with
starting transom and base jack.
Steel, hot-dip galvanised.
Adjustable range 10 x 0.10 m = 1.00 m.

9
 Side Guards Length
m
Width
m
Weight
kg
Art.
No.

SINGLE GUARD RAIL 0.73 1.20 000499

Steel tube Ø 33.7 mm,
hot-dip galvanised. 1.09 2.20 000500
1.57 2.40 000501
2.07 3.80 000502
2.57 4.60 000503
3.07 5.90 000504

DOUBLE GUARD RAIL 1.57 7.20 000509

Steel tube Ø 33.7 mm,
hot-dip galvanised, rear-guard. 2.07 9.80 000510
2.57 11.80 000511
3.07 13.50 000512
4.14 21.00 000513

DOUBLE GUARD RAIL 1.57 3.00 002212

Aluminium, rear-guard.
2.07 4.00 002211
2.57 5.00 002210
3.07 5.80 002205

GUARD RAIL COUPLER A/F 19 1.20 000591

half coupler with wedge-lock
system for fixing guard rails. A/F 22 1.20 002464

DOUBLE END GUARD RAIL 0.73 3.40 000530

Steel tube Ø 33.7 / 26.9 mm,
double side guard at the ends. 1.09 3.80 000531

TIMBER TOEBOARD 0.73 0.15 1.50 000537

With steel fitting for hooking in the
toeboard-pins of the frames. 1.09 0.15 2.50 000538
1.57 0.15 3.00 000539
2.07 0.15 4.00 000540
2.57 0.15 4.80 000541
3.07 0.15 6.50 000542
4.14 0.15 9.00 000543

END TIMBER TOEBOARD 0.73 0.15 1.50 000544

With steel fittings,
for end protection. 1.09 0.15 2.00 000545

10
Upper Scaffold Guard Rails Length
m
Width
m
Weight
kg
Art.
No.

TOP END GUARD FRAME, STEEL 1.00 0.73 12.50 000865

Steel tube Ø 48.3 mm, hot-dip galvanised,
side guard and decking fastener on the 1.00 1.09 14.70 000556
top scaffold platform.

TOP END GUARD FRAME, ALUMINIUM 1.00 0.73 5.30 000866

Aluminium, otherwise as above.
1.00 0.63 5.50 002447

TOP INTERMEDIATE POST, STEEL 1.00 0.73 6.50 000867

Steel tube Ø 48.3 mm, hot-dip galvanised,
with full decking fastener on the top 1.00 1.09 7.30 000869
scaffold platform and patented handrail
location system for guard rail.

TOP INTERMEDIATE POST, ALUMINIUM 1.00 0.73 2.80 000870

Aluminium, otherwise as above.

GUARD RAIL POST, STEEL 1.00 5.10 000871

Steel tube Ø 48.3 mm,
with joint pin and short decking fastener.

GUARD RAIL POST, ALUMINIUM 1.00 2.10 000872

Aluminium, otherwise as above.

SINGLE GUARD RAIL POST 1.00 4.70 000873

Steel tube Ø 48.3 mm,
with joint pin, without decking fastener.

GUARD RAIL POST 2.00 m 2.00 9.50 000875

with short decking fastener and joint pin.

Guard Scaffold Length

m
Width
m
Weight
kg
Art.
No.

ROOFERS BRACKET 0.73 15.60 000275

for protection of roofers,
for use in roof guard scaffolds (load class 3).

PROTECTIVE NET POST 2.00 0.73 13.00 000874

0.73 m wide
1.09 m wide 2.00 1.09 14.00 000563

WEATHER PROTECTION POST 2.00 12.00 000565

Steel, hot-dip galvanised,
incl. 3 swivel pins for fastening tarpaulins
and tarp battens (guard rails),
with connecting piece for guard rail posts.

For scaffold protection tarpaulin, see our „Universal Accessories“ brochure.

11
 Scaffold Extensions Length
m
Width
m
Weight
kg
Art.
No.

HOP-UP BRACKET 0.36 0.36 3.70 000582

With half coupler, hot-dip galvanised.

HOP-UP BRACKET 0,73 0.73 6.20 000585

With half coupler, hot-dip galvanised.

FRAME HOP-UP BRACKET 0.73 0.73 10.00 000589

For scaffold extension and construction
of a gap-free protection roof.

HOP-UP BRACKET 1.09 1.09 9.00 000586

With half coupler, hot-dip galvanised.

PROP STRUT 1.77 5.30 000588

With two half couplers,
for supporting the hop-up brackets. 1.95 5.80 000587

LOCK AGAINST LIFT-OFF 0.32 1.00 000580

For hop-up brackets.
0.73 1.50 000581
1.09 2.00 000579

ALUMINIUM FILLER DECK 1.57 000573

Gap closure for hop-up brackets.
2.07 000574
2.57 000575
3.07 000576

10
Anchoring Length
m
Width
m
Weight
kg
Art.
No.

CONNECT WALL TIE WITH PLATE 0.70 2.70 000124

Steel tube Ø 48.3 mm, hot-dip galvanised.
To be installed with a double coupler.

WALL TIE 0.30 1.40 000240

Steel tube Ø 48.3 mm, hot-dip galvanised.
Installation as short scaffold tie with one double 0.40 1.80 000242
coupler, as long scaffold tie with two double 0.50 2.00 000125
couplers.
0.60 2.60 000241
1.00 3.80 000127
1.30 4.80 000131
1.50 5.50 000132

DOUBLE COUPLER Ø 48.3 mm A/F 22 1.20 000325

Heavy duty model, ribbed, class B (BB)
according to DIN 4420 and ES 74. A/F 19 1.20 000326
Hot-dip galvanised drop-forged steel,
for connecting two scaffold tubes at right angles.
Collar nuts 19 or 22 mm width A/F.
Approved load of 9 kN (900 kg) as single
coupler or 15 kN (1500 kg) as double coupler.
Collar nut torque 50 Nm.
From 1.000 pieces ask for net price!

SWIVEL COUPLER Ø 48.3 mm A/F 22 1.40 000328

Heavy duty model, ribbed, class B (BB)
according to DIN 4420 and ES 74. A/F 19 1.40 000329
Hot-dip galvanised drop-forged steel, for
connecting scaffold tubes at any required angle.
Collar nuts 19 or 22 mm width A/F.
Approved load of 6 kN (600 kg).
Collar nut torque 50 Nm.
From 1.000 pieces ask for net price!

For special couplers see our

Universal Accessories brochure.

EYE-BOLT 0.09 0.155 000358

galvanised.
From 1.000 pieces ask for net price! 0.12 0.175 000359
0.16 0.210 000360
0.19 0.235 000363
0.23 0.265 000361
0.35 0.364 000362

EXPANDING PLUG 0.08 0.007 000357

For eye-bolts with 12 mm wood thread.
From 10.000 pieces ask for net price!

PLASTIC CAP 0.003 000651

For closing anchor drill-holes.
From 10.000 pieces ask for net price!

13
 Protective Roofing Length
m
Width
m
Weight
kg
Art.
No.

ROOF GUARD EXTENSION 0.73 4.00 000518

Used in conjunction with 0.73 m frame
hop-up bracket and lock against lift-off.

LOCK AGAINST LIFT-OFF 2 boards 2.00 000590

Steel, hot-dip galvanised,
suitable for use with roof guard extension.

Mobile Tower Accessories Length

m
Width
m
Weight
kg
Art.
No.

STEEL BEAM 200 FOR MJ ALUMINIUM 2.00 12.00 000599

ROLLING TOWER
Steel tube, hot-dip galvanised,
for building mobile towers.

STEEL BEAM 300 FOR MJ ALUMINIUM 3.00 23.00 000598

ROLLING TOWER
Steel tube, hot-dip galvanised,
for building mobile towers.

CASTOR WITH ADJUSTABLE SPINDLE 7.00 000332

1.000 kg maximum load, with nylon wheel,
height-adjustable.

LOCKING PIN 0.15 000508

14
Scaffold Spare Parts Length
m
Width
m
Weight
kg
Art.
No.

RIVETS 23 x 1 x 54 mm 0.033 001811

RIVETS 12 x 1 x 54 mm 0.011 001805

TOEBOARD FITTING UC 0.40 004203

END TOEBOARD FITTING UNI + UC 0.15 002039

Two pieces per toeboard needed.

RIVETS 8 x 1 x 42 mm 0.011 001820

M14 RINGBOLT 0.14 001761

For handrail support and fixing top
decking.

15
 Examples for Frame Scaffold
UNI-CONNECT 70
Scaffold Bay Length 3.07 m 101.31 52.19 30.70 15.35 12.28 12.28
Scaffold Length (m) x Working Height (m) x 10.20 x 10.20 x 10.20 x 10.20 x 10.20 x 8.20
Working Area 1033 m2 532 m2 313 m2 157 m2 125 m2 101 m2

Basic configuration
Assembly Frame 2.00 m x 0.73 m Steel 136 72 44 24 20 15
Steel Deck 3.07 m x 0.32 m 264 136 80 40 32 24
Diagonal Brace for 3.07 m bay 32 20 12 8 4 3
Single Guard Rail 3.07 m, twice for two levels 165 85 50 25 20 20
Timber Toeboard 3.07 m for two levels 66 34 20 10 8 8
End Timber Toeboard 0.73 m for two levels 4 4 4 4 4 4
Double End Guard Rail 0.73 m for two levels 2 2 2 2 2 2
Top Intermediate Post 0.73 m with decking fastener 32 16 9 4 3 3
Top End Guard Frame, Steel 0.73 m 2 2 2 2 2 2
Base Jack 0.30 m 68 36 22 12 10 10
Horizontal Brace 3.07 m 8 5 3 2 1 1

Anchorage
Connect Wall Tie with Plate 36 20 13 8 7 5
Double Coupler with Collar nuts A/F 19 36 20 13 8 7 5
Expanding Plug 36 20 13 8 7 5
Eye-Bolt 12 x 120 mm 36 20 13 8 7 5

Supplementary equipment
Single Guard Rail 3.07 m, twice for all levels 132 68 40 20 16 8
Timber Toeboard 3.07 m for all levels 66 34 20 10 8 4
End Timber Toeboard 0.73 m for all levels 4 4 4 4 4 2
Double End Guard Rail 0.73 m for all levels 4 4 4 4 4 2

Optional equipment
Aluminium Combi Access Deck 3.07 m x 0.65 m with
plywood panel and aluminium ladder 4 4 4 4 4 3

Assembly Frame Aluminium 2.00 m x 0.73 m 136 72 44 24 20 15

Assembly Frame 2.00 m x 0.73 m Steel -136 -72 -44 -24 -20 -15

16
Scaffold Bay Length 2.57 m 102.80 51.40 30.84 15.42 12.85 10.28
Scaffold Length (m) x Working Height (m) x 10.20 x 10.20 x 10.20 x 10.20 x 10.20 x 8.20
Working Area 1048 m2 524 m2 314 m2 157 m2 131 m2 85 m2

Basic configuration
Assembly Frame 2.00 m x 0.73 m Steel 164 84 52 28 24 15
Steel Deck 2.57 m x 0.32 m 320 160 96 48 40 24
Diagonal Brace for 2.57 m bay 40 20 12 8 8 3
Single Guard Rail 2.57 m, twice for two levels 200 100 60 30 25 17
Timber Toeboard 2.57 m for two levels 80 40 24 12 10 8
End Timber Toeboard 0.73 m for two levels 4 4 4 4 4 4
Double End Guard Rail 0.73 m for two levels 2 2 2 2 2 2
Top Intermediate Post 0.73 m with decking fastener 39 19 11 5 4 3
Top End Guard Frame, Steel 0.73 m 2 2 2 2 2 2
Base Jack 0.30 m 82 42 26 14 12 10
Horizontal Brace 2.57 m 10 5 3 2 2 1

Anchorage
Connect Wall Tie with Plate 43 23 13 9 8 6
Double Coupler with Collar nuts A/F 19 43 23 13 9 8 6
Expanding Plug 43 23 13 9 8 6
Eye-Bolt 12 x 120 mm 43 23 13 9 8 6

Supplementary equipment
Single Guard Rail 2.57 m, twice for all levels 160 80 48 24 20 8
Timber Toeboard 2.57 m for all levels 80 40 24 12 10 5
End Timber Toeboard 0.73 m for all levels 4 4 4 4 4 2
Double End Guard Rail 0.73 m for all levels 4 4 4 4 4 2

Optional equipment

Aluminium Combi Access Deck 2.57 m x 0.65 m

4 4 4 4 4 2
with plywood panel and aluminium ladder

Assembly Frame Aluminium 2.00 m x 0.73 m 164 84 52 28 24 15

Assembly Frame 2.00 m x 0.73 m Steel -164 -84 -52 -28 -24 -15

17
 The product range
As one of the leading manufacturers of scaffolds we produce and provide scaffolding systems, that are compatible to certain scaffold
series of the companies plettac, Layher and RUX. These systems also are available in aluminium.
Our product range comprises outside building scaffolds, modular scaffolds, non-system scaffold accessories, mobile scaffolds, as well
as keder awning roofs.
90% of our scaffolding system parts are produced in Germany in our plant in Plettenberg.

All our scaffolds obviously comply with the requirements of the authorities respectively have the overall approval of the German Institute
for Planning and Building Regulations (DIBt) in Berlin. There also exist additionally several European approvals.

Overall approval UNI 70 DUO of the DIBt Approval UNI-CONNECT 70 DUO of the Overall approval of the DIBt
Z-8.1-303. DIBt Z-8.1-872. Nr. Z-8.1-902.
Overall approval UNI 70 of the DIBt Certificat of compliance for the approval
Z-8.1-184. Nr. Z-8.1-840 for the vertical assembly
Overall approval UNI 100 of the DIBt frame, steel 2,00 m x 1,09 m.
Z-8.1-871. Certificat of compliance for the approval
Nr. Z-8.1-844 for the vertical assembly
frame, aluminium 2,00 m x 0,73 m.

GS-sign for approved security. High quality standards and longlife Release of the overall approval according
functionality are the features that excel to the actual European requirements in the
our non-system scaffold accessories 3rd quarter 2009.

18
www.mj-geruest.de
As a modern and active manufacturer of scaffolds we are online up-to-date, in five
languages. Our Internet page had been adapted especially to the requirements of the
customers who use and need scaffolds.

Convince yourself.
We are looking forward to your visit on the Internet, 365 days a year, 24 hours.

DOWNLOADCENTRE
Fast and easy access to the
most important documentation.

PRODUCTS
The complete range at a glance.

NEWS
With one click you will find out
what is new with MJ.

OCCASIONS
Actual used parts
at special rates.

CREDENTIALS
Extracts of our customers´
interesting projects.

Team
Find and get in contact with the
corresponding member of our staff.

19
MJ-Gerüst GmbH
Ziegelstraße 68
58840 Plettenberg
Germany
Fon +49 (23 91) 81 05 -372
Fax +49 (23 91) 81 05 -375
eMail: [email protected]
www.mj-geruest.de

Subsidiary Berlin
Poratzstraße
16225 Eberswalde
Germany
Fon +49 (33 34) 58 90 -70
Fax +49 (33 34) 58 90 -718
Mobile +49 (171) 69 18 958

The other companies belonging to

the Junior Group:

Junior Kühlkörper GmbH

Heatsinks
Precision components for
the electronics and electrical industry
© MJ-Gerüst GmbH · 10082009_Uni-CONNECT_ENGL
58840 Plettenberg
Germany
Fon +49 (23 91) 81 05 -200
Fax +49 (23 91) 81 05 -280
www.kuehlkoerper.de

MJ - Modul Rent GmbH

Modular space rental
Sales and rental of container accomodation
for residential use, office buildings, industry
and commerce
58840 Plettenberg
Germany
Fon +49 (23 91) 81 05 -400
Fax +49 (23 91) 81 05 -457
www.mj-modulrent.de