Inductive sensor

NBB15-30GM50-E2-M-Y246536
< Basic series
< 15 mm flush
< Increased operating distance
< Extended temperature range
-40 ... +85 °C
< E1-Type approval
< Increased noise immunity 100 V/m

Dimensions

50 300 ±10
47 30
~ 30

A
M30 x 1.5

LED
5 B
36

Technical Data
General specifications
Release date: 2022-08-01 Date of issue: 2022-08-04 Filename: 246536_eng.pdf

Switching function Normally open (NO)

Output type PNP
Rated operating distance sn 15 mm
Installation flush
Output polarity DC
Assured operating distance sa 0 ... 12.15 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.45
Reduction factor r304 0.75
Output type 3-wire
Nominal ratings
Operating voltage UB 10 ... 30 V
Switching frequency f 0 ... 200 Hz
Hysteresis H typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 1
 Inductive sensor NBB15-30GM50-E2-M-Y246536
Technical Data
Voltage drop Ud ≤ 2.5 V
Operating current IL 0 ... 200 mA
Off-state current Ir 0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current I0 ≤ 10 mA
Time delay before availability tv ≤ 60 ms
Switching state indicator all direction LED, yellow
Functional safety related parameters
MTTFd 950 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0%
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
CCC approval CCC approval / marking not required for products rated ≤36 V
E1 Type approval 10R-04
Ambient conditions
Ambient temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Cable connector Deutsch
with PUR cable 300 mm
Connection assembly Deutsch housing DT04-3P-C015
Deutsch contact 1060-16-0622
Deutsch wedge W3P
30 mm Heat-shrinkable tube
Core cross section 0.75 mm2
Tensile strength of crimped connection min. 85 N IEC 60352-2
Housing material brass, nickel-plated
Sensing face PBT
Degree of protection IP68 / IP69K

Connection

A
L+
C
B
L-
Release date: 2022-08-01 Date of issue: 2022-08-04 Filename: 246536_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 2
 Inductive sensor NBB15-30GM50-E2-M-Y246536
Mounting

Emitted interference and interference immunity in

accordance with motor vehicle directive 2006/28/EG
(e1 Type approval)
Interference immunity in accordance with
DIN ISO 11452-2: 100 V/m
Frequency band 20 MHz up to 2 GHz

Mains-borne interference in accordance with ISO

7637-2: Pulse 1 2a 2b 3 a 3b 4 5
Severity level III III III III III III IV
Failure criterion C A C A A A C

EN 61000-4-2: CD: 8 kV / AD: 15 kV

Severity level IV IV
EN 61000-4-3: 30 V/m (80...2500 MHz)
Severity level IV
EN 61000-4-4: 2 kV
Severity level III
EN 61000-4-6: 10 V (0.15...80 MHz)
Severity level III
EN 55011: Class A

Accessories
BF 30-F Plastic mounting adapter, 30 mm
Release date: 2022-08-01 Date of issue: 2022-08-04 Filename: 246536_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 3