0% found this document useful (0 votes)
49 views2 pages

Fan 1

This document contains a fan selection for a 36 foot diameter fan with 8 blades to provide air flow of 816.6 cubic meters per second at a static pressure of 114.9 Pascals for a cooling tower application. Key specifications of the selected fan include a blade tip speed of 59.5 meters per second, total sound power level of 105.5 decibels, static efficiency of 67.2%, and required shaft power of 139.7 kilowatts. The analysis notes the fan's blade operating natural frequency is close to the rotating frequency, requiring stainless steel bolts.

Uploaded by

miumiuoheb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
49 views2 pages

Fan 1

This document contains a fan selection for a 36 foot diameter fan with 8 blades to provide air flow of 816.6 cubic meters per second at a static pressure of 114.9 Pascals for a cooling tower application. Key specifications of the selected fan include a blade tip speed of 59.5 meters per second, total sound power level of 105.5 decibels, static efficiency of 67.2%, and required shaft power of 139.7 kilowatts. The analysis notes the fan's blade operating natural frequency is close to the rotating frequency, requiring stainless steel bolts.

Uploaded by

miumiuoheb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Customer : Howden Netherlands B.V.

Project : P.O.Box 975, 7550 AZ Hengelo, The Netherlands


Project ref. : Phone +31 (0)74 2556000 / Fax +31 (0)74 2556060
Item no. : www.howdencoolingfans.com
Howden ref.:

Input data - General parameters


Fan diameter : 36 [ft] Air flow : 816.6 [m³/s]
Fan blade type : DNF Fan Static Pressure : 114.9 [Pa]
Blade number :8 Inlet temperature : 31.4 [°C]
Fan speed : 103.6 [R/min] Air density : 1.001 [kg/m³]
Installation type : Induced Draught
Mounting orientation : vertical shaft; hub at inlet
Derived correction factors
Input data - Configuration Pressure [Pa] Sound Level [dB(A)]

Application type: Cooling tower 0.0 -


Fan inlet shape : Bell, L/D = 0.15 0.0 0.0
No diffuser present
Tip clearance : 0.010 (2S/Dfan) 0.0 -
Crosswind : 0.0 [m/s] 0.0 -
Input data - Selection restrictions
Maximum Sound Power Level : 120.0 [dB(A)]
Maximum fan shaft power : 250.0 [kW]
Minimum pressure margin : 21.0 [%]
(according to API 661)
Minimum fan static efficiency : 40.0 [%]
Selection result: 36 DNF 8 fan model
This fan selection is valid for operation at specified speed and blade angle only. Equipment must be operated at speed and blade angle
specified herein, deviation therefrom requires a renewed fan selection, subject to Howden validation. All performance figures are based upon
our experience and are such as we expect to obtain during tests, provided the input data specified by you conforms to actual operating
conditions of the Howden equipment. We will, however, accept no liability if those figures are not obtained unless we specifically guarantee
them in writing under an agreed sum, as liquidated damages, subject to the accuracy of the information provided by you and the recognised
tolerances and rejection limits applicable to such figures.

Blade tip speed : 59.5 [m/s] Fan Sound Power Level : 105.5 [dB(A)]
Blade tip angle : 7.6 [°] Total Sound Power Level : 105.5 [dB(A)]
Tolerance on Sound Power Levels ±2 [dB]
Resultant Fan Static Pressure : 114.9 [Pa]
Dynamic pressure : 35.9 [Pa] Fan sound power spectrum
Pressure margin [%] : 65.7¹ / 65.7² Octave PWL PWL(A) Tolerance
Air flow margin [%] : 28.7¹ / -63.0² [Hz] [dB] [dB(A)] [dB]
¹ according to API 63 110.6 84.4 5
² at selected blade angle
125 110.6 94.5 3
Static efficiency : 67.2 [%] 250 106.6 98.0 2
Total efficiency : 88.2 [%] 500 103.6 100.4 2
Fan shaft power : 139.7 [kW] 1000 100.6 100.6 2
2000 92.6 93.8 2
Fan mass : 1143 [kg] 4000 88.6 89.6 2
Fan moment of inertia : 5799 [kg.m²] 8000 84.6 83.5 2
Axial thrust : 14332 [N]
Force due to loss of 1 blade(s): 37947 [N] Indicative Sound Pressure Levels
Imbalance (ISO 1940/1 G6.3) : 78 [N] SPL 1m beside outlet : 77.7 [dB(A)]
SPL 1m above outlet at 45° : 80.4 [dB(A)]
Fan rotating frequency : 1.7 [Hz]
SPL 1m above outlet : 84.3 [dB(A)]
Blade operating natural freq. : 3.6 [Hz]
SPL 1m below cooler unit : 81.0 [dB(A)]
Blade passing frequency : 13.8 [Hz]

Blade operating natural frequency close to fan


rotating frequency (1st or 2nd multiple).
Duty point requires application of stainless steel
straight bolts. Please contact Howden Netherlands
B.V. V6.08 22 Jan 2013
CF-P20 Howden Netherlands B.V.
User name : Engineering P.O.Box 975
Date/Time : 22 Nov 2023, 16:06 7550 AZ Hengelo
File : SI-Def.HCF The Netherlands
Page : 1 of 2 www.howdencoolingfans.com
Customer : Howden Netherlands B.V.
Project : P.O.Box 975, 7550 AZ Hengelo, The Netherlands
Project ref. : Phone +31 (0)74 2556000 / Fax +31 (0)74 2556060
Item no. : www.howdencoolingfans.com
Howden ref.:

Selection graph for 36 DNF 8 fan model

280

260

240

220

200

180
Fan Static Pressure [Pa]

160

140

120
28.0°
100

80 25.0°

60

40
21.0°
20
5.0° 7.6° 13.0° 17.0°
0
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700
Flow [m³/s]

700

600
28.0°

500
25.0°
Fan shaft power [kW]

400
21.0°

300
17.0°

200 13.0°

100 7.6°
5.0°

0
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700
Flow [m³/s]

CF-P20 V6.08 22 Jan 2013 Howden Netherlands B.V.


User name : Engineering P.O.Box 975
Date/Time : 22 Nov 2023, 16:06 7550 AZ Hengelo
File : SI-Def.HCF The Netherlands
Page : 2 of 2 www.howdencoolingfans.com

You might also like