Test and Measurement

Product Overview 2011

World Class Hardware & Software

MAVOWATT | 70
3-Phase Energy and Power Disturbance Analyzer Class A
Target Groups:
Energy Consultants • Network Planning • Plant Revision •
Start-up & Maintenance
Applications:
Electric Power and Mains Disturbance Analysis • Harmonics • Flicker •
EN 50160 • Start-up and Fault Events
Features:
■ Integrated analysis module to make event evaluation easy
■ Measurement of fast transients with 1 MHz sampling rate
■ 8 measurement channels: four voltage (differential) & four current at 50 / 60 Hz
■ Data storage to compact flash memory cards 4 GB

MAVOWATT | 50
3-Phase Energy and Power Disturbance Analyzer 1000 V – 1000 Hz
Target Groups:
Energy Consultants • Network Planning • Plant Revision •
Start-up & Maintenance
Applications:
Electric Power Disturbance Analysis • Harmonics • Flicker •
Transients > 10 µs • EN 50160 •
Measurements on Variable Frequency Drives (VFDs)
Features:
Measurements in single- and three- phase systems:
■ DC or 15 Hz ... 1000 Hz, including harmonics (50 th)
■ Integrated USB and Ethernet ports
■ Integrated 50 MB memory, expandable by CF Card or USB memory

MAVOSYS | 10
Power Quality Monitoring System Class A
Modular, high performance PQ-System to monitor power on
a remote location
Please refer to our website: www.gossenmetrawatt.com

DranView6
Evaluation and Analysis Software
Features:
■ Recognized as the most powerful PQ Visualization, Analysis and Report Writing
Software
■ Easy to use and most flexible in operation
■ Statistical tables, PQ Supply Reports, Spectrum Graphs for Harmonics, Event Lists,
Time Plots for hundreds of parameters

2 Power - Energy - Mains Quality

PROFITEST | MASTER
Range of Test Instruments for VDE 0100 / IEC 60364.6
Target Groups:
Maintenance & Repair Organizations (MROs) • Electrical Engineering •
Contractors
Applications:
Testing of Residual Current Devices (RCCBs) • Low Resistance • Loop
& Line • Impedance Measurement • Earth & Insulation Resistance
Measurement in various modes • Four Versions with different capabilities
to choose from
Features:
■ Test of DC sensitive RCD’s
■ Earth resistance test with 2-clamp method
■ Suitable for AC Systems incl. 3-phase from 65 – 500V, 15 – 420 Hz
■ Universal Connector System
■ 4-wire measurement system provides accuracy made simple
■ Configurable Data Memory for up to 50 000 tests
■ PC software ETC for protocols and data management standard
■ DKD traceable Calibration Certificate included
■ Automatic measurement cable compensation

GEOHM C
Ground Resistance Tester
Target Groups:
Building construction • System construction
Applications:
Measurement of ground resistance in electrical systems:
Installation of power systems with V nom of up to 1000 V (DIN VDE 0100) •
Grounding in AC systems with V nom of over 1 kV (DIN VDE 0141) •
Setup & Operation of telecom systems: equipotential bonding & grounding •
Test of Lightning Protection; configuration of grounding systems
Features:
■ User friendly & rugged – many menu languages available
GEOHM 5 only:
■ Earth resistance measurement with current clamps
■ TRMS current measurement via optional clamp meter

METRAFLEX | 3000 & P300

Flexible Current Sensors
Features:
■ Wide range of applications, 3 measuring ranges 30 A / 300 A / 3000 A AC and
wide bandwidth 10 Hz ... 20 kHz for harmonic analysis
■ Extraordinary high precision even at low currents, due to wide dynamic range and
high sensor sensitivity
■ Easy to operate in restricted space thanks to small sensor cross-section of 9.9 mm
and slim end cap of 13.6 mm, IP65 Rating
■ Extremely long battery life of up to 2,000 hours & external power for long-term
■ 600V @ CAT IV rated safety 1000 V @ CAT III, unlimited overload, UL approved

Testing of Electric Installations & Grounding 3

METRISO 5000D-PI
Digital high-voltage insulation tester 100 ... 5000 V
Target Groups:
Utilities • Industries • Manufacturer •
Service companies and organizations
Applications:
Preventive non-destructive measurement of insulation resistance •
in electrical systems by Polarization Index Method
Features:
■ Excellent quality and safety, easy handling
■ Good results in electromagnetic fields
■ On-site printer
■ Free of charge PC-software for reports

METRAHIT | ISO
Insulation tester and multimeter 50 ... 1000 V – smart data Logger
Target Groups:
Electro Service • White Goods / Household Appliances • Photovoltaic
and hybrid technology • Utilities • Switch gear cabinet manufacturers •
Electrical Installers
Applications:
Measurement of insulation resistance between conductive parts •
Insulation testing at switch gears • Special version for Telecomunication
Industries (METRAHIT T-Com) • Photovoltaic IEC 60364-7-712 Instal-
lation of low voltage installations • IEC 61730-2 Safety qualification of
photovoltaic installations
Features:
■ Handy Multimeter and Insulation Tester
■ Smart Data Logger System

METRAHIT | CAL
Multifunctional calibrator – simulator
Target Groups:
Process and automatization engineering • control room and equipment
fabrication • general measuring technology
Applications:
Calibration of measuring transducers • buffer amplifiers • transmitters •
temperature measuring and recording instruments • controllers • signal-
ling devices and indicators.
Features
■ Universal calibrator, simulator for mA / mV … V / °C / °F (Pt100 / 1000, Ni100 / 1000,
thermocouples: J, L, T, U, K, E, S, R, B, N) / 5 … 2000 Ω
■ Frequency and pulse run generator
■ Ramp and staircase functions
■ Transmitter simulator

4 Insulation – Calibration
METRAHIT | A, E, S-Series
METRAHIT Series Multimeter & Measuring Systems
Applications:
With 20+ measurement functions, high accuracy and resolution of up to
60000 digits these meters serve all markets where high performance is
required – in the laboratory and in the field. With Data Logging, IR-Inter-
face and MetraWin Software these meters are High Precision Measuring
Systems with superior price / performance ratio.
Features:
■ METRAHIT Outdoor with IP65 Rating
■ Patented Automatic Input Blocking System (ABS)
■ Intrinsically Safe Milliohmmeter
■ DMM + Insulation Testing +  Smart Data Logging
■ The Safest Multimeters in the World
■ DKD traceable Calibration Certificate included

METRAHIT | WORLD & 2+

Autoranging Multimeter for international use
Features:
■ Economy & Superior Performance
■ ABS Automatic Input Blocking System
■ Self-Calibration Mode in the field
■ Wide range of functions
■ Temperature Measurement

METRAHIT | 27EX, I, M
Milliohmmeter for Use in Potentially Explosive Atmospheres
Target Groups:
Production & Maintenance of aircrafts • motors • railways •
switch boards etc
Applications:
Tests of contact resistance of busbars, switches, terminals •
Insulation measurements at wires in airplanes and helicopters •
Special ATEX certified version for measuring in potentially explosive
atmospheres • Bonding Test in fuel tanks
Features:
■ Intrinsically Safe Milliohmmeter ATEX (27EX)
■ DMM + Milliohm + Microohm + Insulation Tester (27I)
■ DMM + Milliohm + Microohm (27M)

METRAwin 10 / METRAHIT
PC software for protocols and data handling
Features:
■ Measured values are queried from the multimeters by METRAwin 10,
are managed at the PC and can be displayed as Yt or XY graphs (up to 6 channels),
or in tabular form (up to 10 channels)
■ Measurement data can be easily imported to other Windows applications with
the clipboard function at the PC (e.g. Word or Excel)
■ The software runs under Windows 95B, 98, ME, NT, 2000, XP and Vista

Measuring Technology - Portable 5

SECUTEST | SIII+
Electrical Safety Tester for Portable Appliances and Devices
Target Groups:
Manufacturer & Service organisations of electrical appliances and devices
Applications:
Testing the electrical safety of:
Electrical household appliances (IEC EN 60335) • Electrical equipment for
measurement and laboratory devices (EN 61010) • Electrical equipment
(VDE 0701, BS, NEN3140) • Data processing devices and equipment
(VDE 0701 part 240, EN 60950)
Features
■ Protective conductor resistance test with 200 mA, 10 A or with 25 A test current
■ Manual or preprogrammed automatic test sequences for many standards and
applications
■ High voltage up to 6 kV DC without safety fence
■ RCD built in for safety of skilled person & user
■ Modular, also in pricing

MetraMachine 204/2,5+ & 439/5,4+

CE Mark Tester & Electric Safety for Switchboards and Machinery
Target Groups:
Switchboard (EN 60439) and machinery (EN 60204) manufacturers
Applications:
Quick, safe testing of electrical and electronic equipment and systems,
with nominal voltages of up to 1000 V, at machinery in accordance with
DIN EN 60204-1 and VDE 0113, together with PROFITEST C’s loop
impedance tests.
Features:
■ Is by far the easiest and safest to handle instrument
■ Instrument & memory remote control for R SL and R ISO
■ Precise 4-wire connection

PC | DOC
PC software for protocols and data handling
Features:
■ PC.doc-Word/Excel inserts test results and data entered at the test instrument
into protocols, test- or list forms
■ Data can be exported to MS Word and Excel for further processing and print out.

6 Testing of Electric Appliances & Machines

SYSKON | P1500, 3000, 4500 & KONSTANTER SSP 240
Programmable Power Supplies 120W … 4500W
Target Groups:
R&D, Production and Testing Facilities of:
Automotive & Avionic/Aerospace • Communication & IT- and Solar Panel
Industries • Electronic Circuit Companies • Laboratories • Schools •
Universities • etc
Applications:
Power simulation (UID characteristic) of defined and precise voltage- and
current signals in R&D • production and test-/ quality assurance
Features:
■ Very fast response & setting times
■ Fast (rise time < 2 ms) and
■ Precise (0,05 %, 5 digit display)
■ Power Supplies from 120 W to 4500 W
■ Low ripple
■ Protections: Over Voltage – Over Current – Over Temperature
■ Up to 1700 test sequences and 15 device configurations can be programmed
■ Power Factor Correction

SECULIFE
Safety-, Functional & Light Testers for Medical Applications
Target Groups:
Manufacturers • Service companies • Service departments
… of portable electrical medical appliances and devices
Applications
Testing the electrical safety of medical appliances and devices:
● During production and after repair, according IEC 60601
● Periodically, according IEC 62353

● Electrical safety tests to ensure SAFE operation of medical appliances

● Functional tests to ensure CORRECT operation of medical devices
● Light testers to ensure SUFFICIENT illumination in medical areas
Features
■ Electrical safety tests
■ Oximeter simulation
■ Infusion pump analyzer
■ Defibrilator analyzer
■ Patient simulator
■ Illumination analyzer
■ Pacemaker analyzer
■ HF Surgery analyzer
■ Stimulation analyzer

Power Supplies & Measuring Systems for Medical Technology 7

 GMC-I Messtechnik GmbH
Südwestpark 15
D – 90449 Nürnberg
Telefon: +49 911 8602-111
Telefax: +49 911 8602-777
E-Mail: [email protected]
www.gossenmetrawatt.com

Sales partner
Printed in Germany • Subject to change without notice • 1/10.09 • 3-337-240-03