Scribd
Upload
35 views2 pages

May Jun 2016

This document contains a 12 question exam on PLCs and automation. The questions cover a range of topics including process control principles, the role of automation, signal conditioning circuits, types of switches, programmable automation controllers, ladder logic, HMIs, PLC specifications, SCADA systems, distributed control systems, CNC machine applications, Ethernet, TCP/IP, NC machine input media, ControlNet, and FF-HSE. The exam is 2.5 hours long and contains a total of 70 marks.

Uploaded by

pecoxor808
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views2 pages

May Jun 2016

This document contains a 12 question exam on PLCs and automation. The questions cover a range of topics including process control principles, the role of automation, signal conditioning circuits, types of switches, programmable automation controllers, ladder logic, HMIs, PLC specifications, SCADA systems, distributed control systems, CNC machine applications, Ethernet, TCP/IP, NC machine input media, ControlNet, and FF-HSE. The exam is 2.5 hours long and contains a total of 70 marks.

Uploaded by

pecoxor808
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Total No. of Questions : 12] SEAT No.

:
P3609 [Total No. of Pages : 2

[4959] - 1090
B.E. (E & Tc)
PLC’s and Automation
(Elective - II) (2012 Course)
Time :2½ Hours] [Max. Marks :70
Instructions to the candidates:-
1) Answer Q.1 or Q.2, Q.3 or Q.4, Q.5 or Q.6, Q.7 or Q.8, Q.9 or Q.10, Q.11 or Q.12.
2) Neat diagrams must be drawn wherever necessary.
3) Figures to the right side indicate full marks.
4) Use of logarithmic tables slide rule, Mollier charts, electronic pocket
calculator and steam tables is allowed.
5) Assume Suitable data if necessary

Q1) a) Explain different process control principles. [4]


b) Explain role of automation in modern developments. [4]
OR
Q2) Explain different approaches to design digital control systems. [8]

Q3) A sensor output voltage ranging from - 2.4 volts to –1.11 volts. To interface it
to an analog to digital converter, this needs to be 0 to 2.5 volts. Develop the
signal conditioning circuit. [6]
OR
Q4) Discuss the typical issues & guidelines for analog signal conditioning design.[6]

Q5) List and explain different types of switches. [6]


OR
Q6) Explain programmable automation controller [PAC] [6]

Q7) a) Draw and explain block diagram for elevator system. Develop the ladder
diagram for the same. [10]

P.T.O.
b) Write a short note on : [8]
i) MIS
ii) MES
OR
Q8) a) Define the term HMI. Explain its application in automation. [6]
b) Define the term PLC. Explain its typical specifications. [6]
c) Draw the ladder diagram for the following sequence : [6]
i) If push button PB1 is pressed the red light turns ON.
ii) If push button PB 2 is pressed, the green light turns ON.
iii) If both the bush buttons [PB1 & PB2] are pressed at once, neither
light turns ON

Q9) a) Explain functions of various elements used in SCADA system. [8]


b) Draw and explain block diagram of distributed control system. [8]
OR
Q10) a) Define the term SCADA. Explain various features of SCADA system.[8]
b) What factors makes DCS different from other control systems? Justify.[8]

Q11) a) List the applications of CNC machines in manufacturing Industry. Explain


any one in detail [8]
b) Write a short note on : [8]
i) Ethernet
ii) TCP/IP
OR
Q12) a) What are the different media used to input information for NC machines?
Discuss the advantages of each medium [8]
b) Write a short note on : [8]
i) control net.
ii) FF - HSE.



[4959] - 1090 2

You might also like