Scribd
Upload
88 views4 pages

SOR For Procurement of Bulk Materials For Sapele CEGX-02 and Sapele W-7T Flowline Construction

This document lists procurement items needed for construction of the Sapele CEGX-02 and Sapele W-7T flowlines, including line pipes, bends, flanges, valves, bolts, and other piping components. A total of 72 different items are listed along with their quantities, descriptions, and units of measurement. The grand total cost of these materials will be calculated including VAT.

Uploaded by

Kasarachi Amadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
88 views4 pages

SOR For Procurement of Bulk Materials For Sapele CEGX-02 and Sapele W-7T Flowline Construction

This document lists procurement items needed for construction of the Sapele CEGX-02 and Sapele W-7T flowlines, including line pipes, bends, flanges, valves, bolts, and other piping components. A total of 72 different items are listed along with their quantities, descriptions, and units of measurement. The grand total cost of these materials will be calculated including VAT.

Uploaded by

Kasarachi Amadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Procurement of Bulk Materials for Sapele CEGX-02 and Sapele W-7T Flowline Construction

S/N Description of Items UoM Qty


1 3" Sch 80 Line Pipes, Bare, Sml, CS, 6m Long Pcs 2
2 3"x 0.600" W.T SML LINE PIPE API 5L GRB. SCH XXS 6M LG .BE Pcs 4
3 4"x 0.674" W.T SML LINEPIPE API 5LGR B. SCH XXS 6M LG .BE Pcs 1
4 4" Canusa Heat Shrink Sleeves Pcs 900
5 2" Canusa Heat Shrink Sleeves Pcs 450
6 4" X 90° Bend, Bw, 0.34" W.T, R=5d, Pe Coated, Api 5l-x52, Carbon Steel Pcs 20
7 4 X 45° Bend, Sch 80 Coated Pcs 10
8 4 X 600#, Flange, Wn, Rf, Cs, A105, Sch 80 (XS), Asme B16.5, Carbon Steel Pcs 20
9 4" X 600#, Blind Flange, Rf, Cs, A105, Asme, B16.5, Carbon Steel Pcs 4
10 4" X 600# Spw Gasket RF B16.20 Pcs 20
11 2" Sch 80 API 5L X52 Line Pipe, PE Coated, PSL2 Pcs 450
12 1+1/8"unc Nuts X180mm Lg Stud Bolt, Gr.B7,Astm A194 Gr.2h Pcs 100
13 3" X 90° Elbow, Sch 80 ASTM A234 ASME B16.9 WPB CS Pcs 20
14 3 X 600# Sch Xs (80), WN Flange Ansi RF A105 CS Pcs 12
15 4" X 600# Sch 80 Insulating Joint 5L X52 147.03Bar WT=8.56mm Pcs 4
16 1/2" X 2500# Sch 160 W.N Flange, RTJ, CS Pcs 20
17 1/2" SCR'D FLANGE RTJ SCH 160 ANSI 2500LB (with 1/2" threaded NPT) 16
18 4" x 3" Sch 80 Conc. Reducer Pcs 4
19 4" x 3"conc. Reducer WPB Seamless Astm A234 - Wpb SchXXS CS Pcs 4
20 1/2" GLOBE VALVE 2500LB RTJ FLG ENDS Pcs 8
21 3-1/8" BALL VALVE, API 5000psi, CS, RTJ FLG ENDS, RTJ Pcs 2
22 4" BALL VALVE ANSI 600 FLG ENDS, RF Pcs 4
23 3" BALL VALVE ANSI 600 FLG ENDS, RF Pcs 2
24 1/2" Type 45 Degree NEEDLE VALVE THRD, 6000LB (Kerotest Valve) Pcs 10
25 2" BALL VALVE ANSI 600 FLG ENDS, RF Pcs 2
26 2" CHECK VALVE ANSI 600 FLG ENDS, RF Pcs 2
27 2"X2" ANGLE CHOKE VALVE, 90DEGREE, ANSI 600 FLG ENDS, RF Pcs 4
28 2" x 600#, Flange, SCH 80 RF MATL A105 to ASME B16.5 Pcs 20
29 3-1/8" X 5000#, BLIND Flange, RTJ Pcs 2
30 4-1/16" X 5000#, BLIND Flange, RTJ Pcs 2
31 2" 90 Degree BEND, Sch. 80, PE coated Pcs 14
32 2" 90 Degree ELBOW, Sch. 80, Bare Pcs 4
33 2" 90 Degree BEND, Sch. 80, Bare Pcs 2
34 3" 90 Degree BEND, Sch. XXS, Bare Pcs 6
35 2" X 600#, GASKET, 4.5mm THK SPIRALLY WOUND GASKET, SS WINDINGS Pcs 20
36 5/8" x 110mm LG Stud Bolts + Nuts, 600#, ASTM A193 Gr B7 c/w 2 Heav Pcs 180
37 7/8" x 145mm LG Stud Bolts + Nuts, 600#, ASTM A193 Gr B7 c/w 2 Heav Pcs 200
38 3/4" x 125mm LG Stud Bolts + Nuts, 5000#, ASTM A193 Gr B7 c/w 2 Hea Pcs 180
39 1-1/4” X 195mm stud bolts and nuts Pcs 24
40 4” Ring Gasket, RTJ, Octagonal, RX=39 Pcs 8
41 3” Ring Gasket, RTJ, Octagonal, RX=35 Pcs 10
42 1/2” Ring Gasket, RTJ, Octagonal, RX=13 Pcs 16
43 2” X 5000# Ring Gasket, RTJ, Octagonal, RX=24 Pcs 17
44 4-1/16” X API 5000# W.N Flange, CS, SCh XXS Pcs 4
45 3-1/8” X API 5000# W.N Flange, CS, SCh XXS Pcs 14
46 2-1/16” X API 5000# W.N Flange, CS, SCh XXS Pcs 2
47 3" STR. TEE SCH. XXS ASTM A244-WPB BW Pcs 4
48 4" CAP SCH. XXS ASTM. A234-WPB Pcs 2
49 2"-12" x 1/2" BRANCH NIPPLE SCH 160 CS Pcs 10
50 1/2" X 3" Threadolet, 6000psi, CS Pcs 4
51 1/2" x 3" WELDOLET SCH 160, CS Pcs 8
52 6" Line Pipe X 0.864" W.T. Sch XXS, API. 5L GR'B' Seamless, 12M, Bare Pcs 4
53 4" Line Pipe X 0.674" W.T. Sch XXS, API. 5L GR'B' Seamless, 6M, Bare Pcs 1
54 2" WN FLANGE RTJ, CLASS 2500#, SCH xxs, ASTM A105, ASME B16.5 Pcs 4
55 2" BLIND FLANGE, RTJ, CLASS 2500# (WITH 1/2" THREADED NPT) Pcs 4
56 4-1/16" W.N Flange API 5000psi RTJ Bore for Sch XXS Pcs 1
57 5-1/8" WN FLANGE RTJ, API 5000#, SCH XXS, ASTM A105, ASME B16.5 Pcs 1
58 6" WN FLANGE RTJ, CLASS 2500#, SCH XXS, ASTM A105, ASME B16.5 Pcs 14
59 6" 90 Degree BEND, API. 5L GR'B' Seamless, CS, W.T 0.864", Bare Pcs 4
60 6"-45 Degree BEND, API. 5L GR'B' Seamless, CS, W.T 0.864", Bare Pcs 2
61 6"x5" Conc. Reducer BW, SCH XXS Pcs 1
62 6"x6" Equal Tee, BW, SCH XXS, CS, SMLS Pcs 1
63 RX26 OCTAGONAL RING GASKET Pcs 2
64 RX47 OCTAGONAL RING GASKET Pcs 10
65 5-1/16" X API 5000psi Ring Gasket, RX44 Pcs 1
66 1-1/2" X260mm LG Stud bolts and Nuts Pcs 16
67 1"X185mm LG Stud bolts and Nuts Pcs 16
68 6" BALL VALVE, FLANGED CLASS 2500#, RTJ Pcs 4
69 6" CHECK VALVE VALVE, FLANGED CLASS 2500#, RTJ Pcs 2
70 2" BALL VALVE, FLANGED CLASS 2500#, RTJ Pcs 2
71 1/2" SS Pressure Gauge, 0-400 Bar Pcs 2
72 2" X 355mm LG Stud bolts and Nuts Pcs 120
TOTAL
VAT(7.5%)
GRAND TOTAL
uction
Unit Price (USD) Amount (USD)

You might also like