Drawings EJX510A, EJX610A, EJX530A
and EJX630A
Absolute and Gauge Pressure Transmitter
SD 01C25F01-01E [Style EJX510A, EJX530A: S2, EJX610A, EJX630A: S1]
Unit: mm (approx. inch)
● With Process connections code 7
95(3.74) 188(7.40)
60(2.36)*2 Integral indicator Zero
(optional) adjustment 110(4.33)
Extenal indicator 12 39
Conduit connection Conduit connection*5
(0.47) (1.54)
(optional)
ø78(3.07)
(2.76)
54
ø70
126(4.96)
110(4.33)
(2.13)
159(6.26)
6 (6.50)
165
(0.24)
Ground terminal
Electrical connection Open to
for code 5, 9, A, and D. atmosphere*1
Mounting bracket 12*3 2-inch pipe 129(5.08)
(optional) (0.47) (O.D. 60.5 mm)
*1: Only for EJX530A and EJX630A whose measurement span code is A, B, or C.
*2: 58 mm(2.28 inch) for measurement span code D.
*3: 11 mm(0.43 inch) for measurement span code D.
*4: When electrical connection code 7 or C is selected, a blind plug is protruded up to 8 mm from the conduit connection.
*5: When option code PP is selected, a blind plug is attached to the conduit connection on both sides.
● With Process connections code 4
(6.14)
156
● With Process connections code 8 and 9
24(0.94)
(6.77)
172
ø6
5(0.20)
(0.24)
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation.
Subject to change without notice. Printed in Japan.
SD 01C25F01-01E
1st Edition: June 30, 2004
9th Edition: Jan. 31, 2023
P-
2
● Terminal Configuration ● Terminal Wiring
+ 1
Power supply and output terminals
SUPPLY – 2
CHECK + 3 External indicator (ammeter) terminals*1*2
– 2
or or
+ 3 Status contact output terminals*2
ALARM – 2 (when /AL is specified)
Ground terminal
*1: When using an external indicator or check meter, the internal
resistance must be 10 Ω or less. A check meter or indicator
cannot be connected when /AL option is specified.
Terminal 1 Terminal 3 *2: Not available for FOUNDATION Fieldbus and PROFIBUS PA
Terminal 2 communication types.
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation. SD 01C25F01-01E
P-
