Scribd
Upload
35 views

Procedure Text, Juan

This document provides instructions for making an electrical socket. It lists the necessary tools and materials, which include the socket, wiring, insulation tape, and other hardware. The 6 steps to make a socket are then outlined: 1) Determine the installation position, 2) Make a path for the cable protector, 3) Install the protector on the wall, 4) Turn off the power and connect the wiring, 5) Protect the cable connection in a junction box, and 6) Insert the cable into the protector and install the cap. Once all steps are correctly followed, the finished socket can be used.

Uploaded by

ggwpgamerz25
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Procedure Text, Juan

This document provides instructions for making an electrical socket. It lists the necessary tools and materials, which include the socket, wiring, insulation tape, and other hardware. The 6 steps to make a socket are then outlined: 1) Determine the installation position, 2) Make a path for the cable protector, 3) Install the protector on the wall, 4) Turn off the power and connect the wiring, 5) Protect the cable connection in a junction box, and 6) Insert the cable into the protector and install the cap. Once all steps are correctly followed, the finished socket can be used.

Uploaded by

ggwpgamerz25
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Presentation by XI ELEKTRONIKA INDUSTRI 2

JUAN DETARA PROCEDURE TEXT | 2023


ZAMORA

HowTo Make
A Socket ?
Page 02 of 06 XI ELEKTRONIKA INDUSTRI 2

Socket? What
is that?
The socket is a connecting point that functions to transmit
power from an electrical source to electronic devices. By
creating a socket, you can have easier access to electricity

JUAN DETARA ZAMORA


Page 03 of 06 JUAN DETARA ZAMORA

Tools & If u going to make an a socket, this is the

Materials
tools & materials! so u can make it by
yourself.

01 Hole socket (adjust to needs) 05 TC3 Protector Cable 09 Cutter

02 NYM cable 2x1.5 mm² 06 Bolt 10 Screwdriver +

03 Electrical Insulation Tape 07 Fischer

04 T-Dus branch 3 08 Cutting pliers


Page 04 of 06

The
1. Determine the installation position of the socket. Ideally, the
recommended distance for installing a socket is 150 cm from the
floor.
2. Make a path to place the cable protector on the wall.
3. install the protective cable by removing the insulating cover on

Steps
the back, then attaching it to the path that has been made on the
wall. Make sure the wall is clean from dust and dirt
4. Turn off the electricity in your home and connect the cable for the
socket to the voltage source.
5. The cable connection is carried out in a T-Dus to protect it from
rat bites and the risk of electrical short circuits.
6. After completing the cable connection process, insert the cable
into the cable protector that is installed on the wall, then install
the cable protector cap.

Presentation by SMK N 2 PEKANBARU


JUAN DETARA Procedure Text | 2023
ZAMORA
Page 05 of 06

Finished!
Your socket is done now!
After doing all the steps correctly, finally
can use your socket! hope this procedure
text useful for you guys all!

Presentation by JUAN DETARA


ZAMORA
Presentation by SMK N 2 PEKANBARU
JUAN DETARA Procedure Text | 2023
ZAMORA

Thank
You!

You might also like