STAAD.

Pro Report
To: From:

Copy to: Date: Ref:

09/04/2022 ca/ 711439199.docx
13:53:00

Job Information

Engineer Checked Approved

Name:
Date: 07-Apr-22

Structure Type SPACE FRAME

Number of Nodes 3 Highest Node 5

Number of Elements 2 Highest Beam 2

Number of Basic Load Cases -2

Number of Combination Load Cases 0

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name
Primary 1 LOAD CASE 1

Beams
Length 
Beam Node A Node B Property
(ft) (degrees)
1 1 2 12.125 1 0
2 2 5 26.500 1 0

Section Properties
Area Iyy Izz J
Prop Section Material
(in2) (in4) (in4) (in4)
1 Rect 15.00x9.96 149.400 1.24E 3 2.8E 3 2.91E 3 CONCRETE

Materials
E Density 
Mat Name 
(kip/in2) (kip/in3) (/°F)

09/12/2023
 3 STEEL 29E 3 0.300 0.000 6E -6
4 STAINLESSSTEEL 28E 3 0.300 0.000 10E -6
5 ALUMINUM 10E 3 0.330 0.000 13E -6
6 CONCRETE 3.15E 3 0.170 0.000 5E -6

Supports
X Y Z rX rY rZ
Node
(kip/in) (kip/in) (kip/in) (kip-ft/deg) (kip-ft/deg) (kip-ft/deg)
1 Fixed Fixed Fixed - - -
5 Fixed - - Fixed - -

1 LOAD CASE 1 : Beam Loads

Da Ecc.
Beam Type Direction Fa Fb Db
(ft) (ft)
1 CON kip GX 13.000 12.125 - - 0.420
2 CON kip GY -18.000 12.200 - - 0.420

1 LOAD CASE 1 : Selfweight

Direction Factor Assigned Geometry

Y -1.000 ALL

Beam Displacement Detail

Displacements shown in italic indicate the presence of an offset
d X Y Z Resultant
Beam L/C
(ft) (in) (in) (in) (in)
1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
1.213 -0.127 -0.001 0.058 0.140
2.425 -0.247 -0.001 0.116 0.272
3.637 -0.350 -0.002 0.174 0.391
4.850 -0.431 -0.003 0.232 0.489
6.063 -0.482 -0.004 0.289 0.562
7.275 -0.488 -0.004 0.347 0.599
8.487 -0.448 -0.005 0.405 0.604
9.700 -0.355 -0.006 0.463 0.583
10.913 -0.200 -0.006 0.521 0.558
12.125 0.024 -0.007 0.579 0.579
2 1:LOAD CASE 1 0.000 0.024 -0.007 0.579 0.579
2.650 0.022 -0.782 -427E 3 427E 3
5.300 0.019 -1.840 -853E 3 853E 3
7.950 0.017 -3.110 -1.28E 6 1.28E 6
10.600 0.014 -4.520 -1.71E 6 1.71E 6
13.250 0.012 -6.003 -2.13E 6 2.13E 6
15.900 0.010 -7.516 -2.56E 6 2.56E 6
18.550 0.007 -9.041 -2.99E 6 2.99E 6
21.200 0.005 -10.572 -3.41E 6 3.41E 6
23.850 0.002 -12.107 -3.84E 6 3.84E 6
26.500 0.000 -13.643 -4.27E 6 4.27E 6

Beam Displacement Detail Summary

09/12/2023
Displacements shown in italic indicate the presence of an offset
d X Y Z Resultant
Beam L/C
(ft) (in) (in) (in) (in)
Max X 1 1:LOAD CASE 1 12.125 0.024 -0.007 0.579 0.579
Min X 1 1:LOAD CASE 1 7.275 -0.488 -0.004 0.347 0.599
Max Y 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
Min Y 2 1:LOAD CASE 1 26.500 0.000 -13.643 -4.27E 6 4.27E 6
Max Z 1 1:LOAD CASE 1 12.125 0.024 -0.007 0.579 0.579
Min Z 2 1:LOAD CASE 1 26.500 0.000 -13.643 -4.27E 6 4.27E 6
Max Rst 2 1:LOAD CASE 1 26.500 0.000 -13.643 -4.27E 6 4.27E 6

Node Displacement Summary

X Y Z Resultant rX rY
Node L/C
(in) (in) (in) (in) (rad) (rad)
Max X 2 1:LOAD CASE 1 0.024 -0.007 0.579 0.579 0.004 13.4
Min X 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.004 13.4
Max Y 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.004 13.4
Min Y 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4
Max Z 2 1:LOAD CASE 1 0.024 -0.007 0.579 0.579 0.004 13.4
Min Z 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4
Max rX 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.004 13.4
Min rX 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4
Max rY 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.004 13.4
Min rY 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4
Max rZ 1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.004 13.4
Min rZ 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4
Max Rst 5 1:LOAD CASE 1 0.000 -13.643 -4.27E 6 4.27E 6 0.000 13.4

Beam Relative Displacement Detail

d Disp. x Disp. y Disp. z Resultant
Beam L/C
(ft) x (in) y (in) z (in) (in)
1 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
1.213 -0.000 0.130 0.000 0.130
2.425 -0.000 0.251 0.000 0.251
3.637 -0.000 0.357 0.000 0.357
4.850 0.000 0.441 0.000 0.441
6.063 -0.000 0.494 0.000 0.494
7.275 0.000 0.503 0.000 0.503
8.487 -0.000 0.465 0.000 0.465
9.700 0.000 0.374 0.000 0.374
10.913 -0.000 0.221 -0.000 0.221
12.125 0.000 0.000 0.000 0.000
2 1:LOAD CASE 1 0.000 0.000 0.000 0.000 0.000
2.650 -0.000 0.589 -0.116 0.601
5.300 -0.000 0.894 -0.191 0.915
7.950 -0.000 0.988 -0.254 1.020
10.600 0.000 0.942 -0.254 0.975
13.250 -0.000 0.822 -0.329 0.885
15.900 0.000 0.673 -0.479 0.826
18.550 -0.000 0.511 -0.329 0.608
21.200 -0.000 0.344 -0.279 0.442
23.850 0.000 0.172 -0.129 0.215
26.500 0.000 0.000 0.000 0.000

Beam Maximum Relative Displacements

Distances to maxima are given from beam end A.

09/12/2023
 Length y d z d Resultant
Beam Node A L/C
(ft) (in) (ft) (in) (ft) (in)
1 1 12.125 1:LOAD CASE 1 0.507 7.073 0.000 8.083 0.507
2 2 26.500 1:LOAD CASE 1 0.994 8.833 -0.537 15.458 1.035

Beam End Force Summary

The signs of the forces at end B of each beam have been reversed. For example: this means that the Min Fx entry gives the largest
tension value for an beam.
Axial Shear Torsion Be
Fx Fy Fz Mx My
Beam Node L/C
(kip) (kip) (kip) (kip-in) (kip-in)
Max Fx 2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520
Min Fx 1 2 1:LOAD CASE 1 22.133 -35.628 0.000 65.520 0.000
Max Fy 2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520
Min Fy 1 2 1:LOAD CASE 1 22.133 -35.628 0.000 65.520 0.000
Max Fz 1 1 1:LOAD CASE 1 24.024 -22.628 0.000 0.000 0.000
Min Fz 2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520
Max Mx 2 5 1:LOAD CASE 1 35.628 -0.000 -0.000 90.720 65.520
Min Mx 2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520
Max My 2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520
Min My 1 1 1:LOAD CASE 1 24.024 -22.628 0.000 0.000 0.000
Max Mz 1 2 1:LOAD CASE 1 22.133 -35.628 0.000 65.520 0.000
Min Mz 1 1 1:LOAD CASE 1 24.024 -22.628 0.000 0.000 0.000

Beam End Forces

Sign convention is as the action of the joint on the beam.
Axial Shear Torsion Bending
Fx Fy Fz Mx My Mz
Beam Node L/C
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
1 1 1:LOAD CASE 1 24.024 -22.628 0.000 0.000 0.000 -0.000
2 1:LOAD CASE 1 -22.133 35.628 -0.000 -65.520 -0.000 -3.29E 3
2 2 1:LOAD CASE 1 35.628 22.133 -0.000 -0.000 65.520 3.29E 3
5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 -65.520 0.000

Beam End Forces Envelope

Sign convention is as the action of the joint on the beam.
Fx Fy Fz Mx My Mz
Beam Node Envelope
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
1 1 +ve 24.024 0.000 0.000 0.000 0.000 0.000
1:LOAD - 1:LOAD 1:LOAD 1:LOAD -
CASE 1 0.000 -22.628 CASE 1 0.000 CASE 1 0.000 CASE 1 0.000 -0.000
- 1:LOAD - - - 1:LOAD
2 -ve 22.133 CASE 1 0.000 0.000 65.520 0.000 CASE3.29E
1 3
1:LOAD - 1:LOAD 1:LOAD 1:LOAD 1:LOAD
CASE 1 0.000 -35.628 CASE 1 0.000 CASE 1 0.000 CASE 1 0.000 CASE 1 0.000
- 1:LOAD - - - -
2 2 +ve 35.628 CASE 122.133 0.000 0.000 65.520 3.29E 3
1:LOAD 1:LOAD - - 1:LOAD 1:LOAD
CASE 1 0.000 CASE 1 0.000 -0.000 -0.000 CASE 1 0.000 CASE 1 0.000
- - 1:LOAD 1:LOAD - -
5 -ve 35.628 0.000 CASE 1 0.000 CASE 190.720 65.520 0.000
1:LOAD - - 1:LOAD 1:LOAD -
CASE 1 0.000 0.000 -0.000 CASE 1 0.000 CASE 1 0.000 0.000
- - 1:LOAD - - -
CASE 1

Beam Force Detail

Sign convention as diagrams:- positive above line, negative below line except Fx where positive is compression. Distance d is given
from beam end A.

09/12/2023
 Axial Shear Torsion Bending
d Fx Fy Fz Mx My Mz
Beam L/C
(ft) (kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
1 1:LOAD CASE 1 0.000 24.024 -22.628 0.000 0.000 0.000 -0.

09/12/2023
 1.213 23.835 -22.628 0.000 6.552 0.000 329.
2.425 23.646 -22.628 0.000 13.104 0.000 658.
3.637 23.457 -22.628 0.000 19.656 0.000 987.
4.850 23.268 -22.628 0.000 26.208 0.000 1.32
6.063 23.079 -22.628 0.000 32.760 0.000 1.65
7.275 22.890 -22.628 0.000 39.312 0.000 1.98
8.487 22.701 -22.628 0.000 45.864 0.000 2.3
9.700 22.512 -22.628 0.000 52.416 0.000 2.63
10.913 22.322 -22.628 0.000 58.968 0.000 2.96
12.125 22.133 -35.628 0.000 65.520 0.000 3.29
2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.520 3.29
2.650 35.628 21.720 -0.000 9.072 65.520 2.6
5.300 35.628 21.307 -0.000 18.144 65.520 1.91
7.950 35.628 20.893 -0.000 27.216 65.520 1.24
10.600 35.628 20.480 -0.000 36.288 65.520 582.
13.250 35.628 2.067 -0.000 45.360 65.520 164.
15.900 35.628 1.653 -0.000 54.432 65.520 105.
18.550 35.628 1.240 -0.000 63.504 65.520 60.
21.200 35.628 0.827 -0.000 72.576 65.520 27.
23.850 35.628 0.413 -0.000 81.648 65.520 7.
26.500 35.628 -0.000 -0.000 90.720 65.520 -0.

Beam Force Detail Summary

Sign convention as diagrams:- positive above line, negative below line except Fx where positive is compression. Distance d is given
from beam end A.
Axial Shear Torsion
d Fx Fy Fz Mx My
Beam L/C
(ft) (kip) (kip) (kip) (kip-in) (kip-in)
Max Fx 2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.
Min Fx 1 1:LOAD CASE 1 12.125 22.133 -35.628 0.000 65.520 0.
Max Fy 2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.
Min Fy 1 1:LOAD CASE 1 12.125 22.133 -35.628 0.000 65.520 0.
Max Fz 1 1:LOAD CASE 1 0.000 24.024 -22.628 0.000 0.000 0.
Min Fz 2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.
Max Mx 2 1:LOAD CASE 1 26.500 35.628 -0.000 -0.000 90.720 65.
Min Mx 2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.
Max My 2 1:LOAD CASE 1 0.000 35.628 22.133 -0.000 -0.000 65.
Min My 1 1:LOAD CASE 1 0.000 24.024 -22.628 0.000 0.000 0.
Max Mz 1 1:LOAD CASE 1 12.125 22.133 -35.628 0.000 65.520 0.
Min Mz 1 1:LOAD CASE 1 0.000 24.024 -22.628 0.000 0.000 0.

Beam Maximum Moments

Distances to maxima are given from beam end A.
Length d Max My d Max Mz
Beam Node A L/C
(ft) (ft) (kip-in) (ft) (kip-in)
1 1 12.125 1:LOAD CASE 1 Max +ve 12.125 0.000 12.125 3.29E 3
Max -ve 0.000 -0.000
2 2 26.500 1:LOAD CASE 1 Max +ve 0.000 65.520 0.000 3.29E 3
Max -ve 26.500 -0.000

Beam Maximum Shear Forces

Distances to maxima are given from beam end A.
Length d Max Fz d Max Fy
Beam Node A L/C
(ft) (ft) (kip) (ft) (kip)
1 1 12.125 1:LOAD CASE 1 Max +ve 0.000 0.000
Max -ve 12.125 -35.628
2 2 26.500 1:LOAD CASE 1 Max +ve 0.000 22.133
Max -ve 0.000 -0.000 26.500 -0.000

09/12/2023
Beam Maximum Axial Forces
Distances to maxima are given from beam end A.
Length d Max Fx
Beam Node A L/C
(ft) (ft) (kip)
1 1 12.125 1:LOAD CASE 1 Max +ve 0.000 24.024
Max -ve
2 2 26.500 1:LOAD CASE 1 Max +ve 0.000 35.628
Max -ve

Beam Maximum Forces by Section Property

Axial Shear Torsion Bending
Max Fx Max Fy Max Fz Max Mx Max My Max Mz
Section
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
Rect 15.00x9.96 Max +ve 35.628 22.133 0.000 90.720 65.520 3.29E 3
Max -ve -35.628 -0.000 -0.000 -0.000

Beam Combined Axial and Bending Stresses

Corner 1 Corner 2 Corner 3 Corner 4 Max Tens Max Com
Beam L/C d
(psi) (psi) (psi) (psi) (psi) (psi)
1 1:LOAD CASE 1 0.000 160.806 160.806 160.806 160.806 0.000 160.
14.550 -721.957 -721.957 1.04E 3 1.04E 3 -721.957 1.04
29.100 -1.6E 3 -1.6E 3 1.92E 3 1.92E 3 -1.6E 3 1.92
43.650 -2.49E 3 -2.49E 3 2.8E 3 2.8E 3 -2.49E 3 2.8
58.200 -3.37E 3 -3.37E 3 3.68E 3 3.68E 3 -3.37E 3 3.68
72.750 -4.25E 3 -4.25E 3 4.56E 3 4.56E 3 -4.25E 3 4.56
87.300 -5.14E 3 -5.14E 3 5.44E 3 5.44E 3 -5.14E 3 5.44
101.850 -6.02E 3 -6.02E 3 6.32E 3 6.32E 3 -6.02E 3 6.32
116.400 -6.9E 3 -6.9E 3 7.2E 3 7.2E 3 -6.9E 3 7.2
130.950 -7.78E 3 -7.78E 3 8.08E 3 8.08E 3 -7.78E 3 8.08
145.500 -8.67E 3 -8.67E 3 8.96E 3 8.96E 3 -8.67E 3 8.96
2 1:LOAD CASE 1 0.000 -8.84E 3 -8.31E 3 9.32E 3 8.79E 3 -8.84E 3 9.32
31.800 -6.98E 3 -6.45E 3 7.45E 3 6.92E 3 -6.98E 3 7.45
63.600 -5.15E 3 -4.62E 3 5.62E 3 5.09E 3 -5.15E 3 5.62
95.400 -3.35E 3 -2.82E 3 3.83E 3 3.3E 3 -3.35E 3 3.83
127.200 -1.59E 3 -1.06E 3 2.06E 3 1.53E 3 -1.59E 3 2.06
159.000 -465.604 62.775 942.553 414.175 -465.604 942.
190.800 -309.198 219.180 786.148 257.769 -309.198 786.
222.600 -187.008 341.371 663.957 135.579 -187.008 663.
254.400 -99.030 429.349 575.979 47.601 -99.030 575.
286.200 -45.264 483.114 522.214 -6.165 -45.264 522.
318.000 -25.714 502.664 502.664 -25.714 -25.714 502.

Beam Combined Axial and Bending Stresses Summary

Max Comp Max Tens
Length Stress d Stress d
Beam L/C Corner Corne
(ft) (psi) (ft) (psi) (ft)
1 1:LOAD CASE 1 12.125 8.96E 3 12.125 3 -8.67E 3 12.125
2 1:LOAD CASE 1 26.500 9.32E 3 0.000 3 -8.84E 3 0.000

Beam Profile Stress

There is no data of this type - Analysis results are not available

09/12/2023
Reactions
Horizontal Vertical Horizontal Moment
FX FY FZ MX MY MZ
Node L/C
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.000
5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 0.000 0.000

Reaction Summary
Horizontal Vertical Horizontal Moment
FX FY FZ MX MY MZ
Node L/C
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
Max FX 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min FX 5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 0.000 0.
Max FY 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min FY 5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 0.000 0.
Max FZ 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min FZ 5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 0.000 0.
Max MX 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min MX 5 1:LOAD CASE 1 -35.628 0.000 0.000 -90.720 0.000 0.
Max MY 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min MY 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Max MZ 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.
Min MZ 1 1:LOAD CASE 1 22.628 24.024 0.000 0.000 0.000 0.

Reaction Envelope
Horizontal Vertical Horizontal Moment
FX FY FZ MX MY MZ
Node Env
(kip) (kip) (kip) (kip-in) (kip-in) (kip-in)
1 +ve 22.628 24.024 0.000 0.000 0.000 0.000
1 +ve Load: 1 Load: 1 Load: 1 - - -
1 -ve 0.000 0.000 0.000 0.000 0.000 0.000
1 -ve - - - - - -
5 +ve 0.000 0.000 0.000 0.000 0.000 0.000
5 +ve - - - - - -
5 -ve -35.628 0.000 0.000 -90.720 0.000 0.000
5 -ve Load: 1 - - Load: 1 - -

Utilization Ratio
Allowabl
Analysis Design Actual Ratio Ax
Beam e Clause L/C
Property Property Ratio (Act./Allow.) (in2) (
Ratio
1 Rect 15.00x9.96 N/A 149.400
2 Rect 15.00x9.96 N/A 149.400

Failed Members
There is no data of this type - Analysis results are not available

Base Pressure

09/12/2023
 FX FY FZ
Node L/C
(psi) (psi) (psi)
1 1:LOAD CASE 1 0.000 0.000 0.000
5 1:LOAD CASE 1 0.000 0.000 0.000

Base Pressure Summary

FX FY FZ
Node L/C
(psi) (psi) (psi)
Max FX 1 1:LOAD CASE 1 0.000 0.000 0.000
Min FX 1 1:LOAD CASE 1 0.000 0.000 0.000
Max FY 1 1:LOAD CASE 1 0.000 0.000 0.000
Min FY 1 1:LOAD CASE 1 0.000 0.000 0.000
Max FZ 1 1:LOAD CASE 1 0.000 0.000 0.000
Min FZ 1 1:LOAD CASE 1 0.000 0.000 0.000

Statics Check Results

FX FY FZ MX MY
L/C
(kip) (kip) (kip) (kip-in) (kip-in)
1:LOAD CASE 1 Loads 13.000 -24.024 0.000 90.720 65.520
1:LOAD CASE 1 Reactions -13.000 24.024 0.000 -90.720 0.000
Difference 0.000 0.000 0.000 0.000 65.520

09/12/2023