® ®

Interzone 1000
Glass flake epoxy
Interzone® 1000 is one of the most proven and reliable • Reinforced with >30% lamellar glass flake by weight in
glass flake epoxies on the market today, with documented the dry film providing enhanced durability and corrosion
in-service performance dating back almost 30 years. resistance to extend lifetime to first maintenance
Providing outstanding abrasion and corrosion resistance
• High film build, high solids, low VOC
to steelwork located in the harshest environments,
Interzone® 1000 is ideal for splashzone areas on offshore • Compatible with sacrificial and impressed
platforms, jackets, transition pieces for offshore wind current cathodic protection systems
installations, jetties, decks, bridges, chemical plants,
• Compliant to ISO20340 and pre-qualified to Norsok M-501
pulp and paper mills as well as water treatment plants.
for Systems 1, 4 and 7A, B and C at 120˚C (248˚F)
Interzone® 1000 is suitable for use at new construction
and during maintenance work especially over surface
tolerant primers and rapid cure epoxies.
A high solids, low VOC, two
component high build epoxy with
chemically resistant glass flake

Interzone® 1000 provides outstanding Glass flake epoxy comparison

corrosion protection thanks to the Glass flake
high levels of lamaller glass flake % in the Higher glass
dry film flake content
pigment (>30% in the dry film). provides
At this level of glass flake the film increased
is almost impenetrable by water levels of
and corrosive ions. abrasion and
corrosion
With its strong resistance to cathodic protection
disbondment, Interzone® 1000 shows
Interzone® 1000, proven performance
offshore on the Hutton TLP good compatibility with both sacrificial
anode and impressed current systems. Interzone® 1000
Glass flake high Glass flake reinforced
For this reason it is ideal for long term solids epoxy epoxy mastic
Interzone® 1000 after nearly
30 years in the splash zone
protection of subsea or immersed
structures.
Level of 12
corrosion
Interzone® 1000 has a long track creep (mm) 10
record of delivering corrosion after
2,000 hrs
protection going back nearly ISO20340
8
30 years. After almost 30 years ageing
testing 6
on the Hutton TLP, Interzone® 1000
has been shown to provide 4
outstanding corrosion protection. Reduced
2 corrosion
With such an outstanding track creep
0
record, Interzone® 1000 has been Interzone® 1000
Glass flake high Glass flake reinforced
selected to provide a long term solids epoxy epoxy mastic

solution for offshore wind farm

owners on a number of installations.
Submerged section of the hull not
protected with Interzone® 1000

Product characteristics

Volume solids 92%

VOC 75 g/l
0.62 lb/gal [USA - EPA Method 24]

Product weight 1.30 kg/l (10.8 lb/gal)

Surface preparation Abrasive blast to Sa2½ or SSPC–SP10

Minimum application temperature 10°C

Method of application Airless spray, air spray, brush

Typical specifications 500-1000μm (20-40 mils) dry equivalent to

Interzone® 1000 is widely used in the offshore wind industry
543-1087μm (21.7-43.5 mils) wet

www.international-pc.com
[email protected]
All trademarks mentioned in this publication are owned by the AkzoNobel group of companies. © Akzo Nobel 2014.
G2_1000_UK

AkzoNobel has used its best endeavors to ensure that the information contained in this publication is correct at the time of printing.
07/14

Please contact your local representative if you have any questions.

Unless otherwise agreed by us in writing, any contract to purchase products referred to in this brochure and any advice which
we give in connection with the supply of products are subject to our standard conditions of sale.