Scribd
Upload
102 views1 page

Comtech IFS REV1.4

The Comtech-IFS is an 8-way active splitter and 4-way active combiner in a compact 1U chassis that provides amplification of signals and allows multiple satellite equipment to share bandwidth without loss. It can be powered via various ports and has DC and 10MHz pass-through between ports. The unit includes indicators and a universal mount and can integrate into satellite systems operating between 950-2150MHz.

Uploaded by

marco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views1 page

Comtech IFS REV1.4

The Comtech-IFS is an 8-way active splitter and 4-way active combiner in a compact 1U chassis that provides amplification of signals and allows multiple satellite equipment to share bandwidth without loss. It can be powered via various ports and has DC and 10MHz pass-through between ports. The unit includes indicators and a universal mount and can integrate into satellite systems operating between 950-2150MHz.

Uploaded by

marco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMTECH IFS

ACTIVE IF SPLITTER/COMBINER

The Comtech-IFS is a L-Band 8-way active splitter equipment. The device can be powered via RX1,
and 4-way active combiner in a compact 1U mini- RX2, TX1, TX2 ports or EXT PWR connector.
chassis. IFS is designed as an IF subsystem for
Active IFS system provides the amplification of
Comtech based hubs and advanced terminals but
signals and allows them to share and summarize
can be used in any other L-Band systems.
without loss. The presence of supply voltage is
There is DC and 10 MHz pass from two ports of the displayed by special indicator.
splitter to the common Rx port and similar
Universal mount allows installing the IFS system
connectivity of two ports of combiner to the
into front or rear side of a standard 19”
common Tx port.
telecommunication rack. It can be installed at any
There is also a separate TX DC and RX DC angle to prevent excessive bending of coaxial
connectors to facilitate BUC and LNB inject, cables and simplifying maintenance compounds.
respectively. Also, these connectors allow IFS can be used to work with a variety of L-Band
measuring the actual voltage supplied to the RF satellite equipment.

PARAMETER SPLITTER COMBINER

Number of ports 8 4

Frequency range 950-2150 MHz 950-2150 MHz

Loss -2 ±2 dB -1 ±2 dB

Frequency response ±2 dB ±3 dB

1 dB Gain compression point 2 dBm 2 dBm

Isolation between ports 14 dB 13 dB

DC pass-through Max 48VDC & 3A; ports Rx1 and Rx2 Max 48VDC & 3A; ports Tx1 and Tx2

10 MHz pass-through Ports Rx1 and Rx2 Ports Tx1 and Tx2

Power 6-48 VDC up to 3W; via ports: Tx1, Tx2, Rx1, Rx2, Rx7, Rx8 or EXT PWR

Size / Weight 487x44x56 mm; 1.5 kg

Environmental 0°…+50° C, humidity up to 95%

Comtech reserves the right to change specifications of products described in


this document at any time without notice and without obligation to notify any
person of such changes. Information in this document may differ from that
published in other Comtech documents. Refer to the website or contact
2500 Alfred-Nobel Boulevard, Suite 401 Customer Service for the latest released product information.
Saint-Laurent (Montreal), Québec, Canada H4S 0A9
T: +1-514-695-8728, E: [email protected] Rev. EL-1.4 © 2022 Comtech 08/18/2022

www.comtech.com

You might also like