Scribd
Upload
53 views1 page

TCC82 Pilecap Design-4 Caps

This document summarizes the design of a pile cap with 4 piles supporting a total load of 55.1 kN. It includes calculations of pile reactions, bending moments, steel reinforcement requirements, beam shear design, and punching shear checks. The pile cap is designed according to Eurocode 2 (EN 1992-1:2004) and includes reinforcement details for the bottom and top steel in the east-west and north-south directions. Design checks for bending capacity, shear capacity, and punching shear are provided and confirm the design is adequate.

Uploaded by

Harendra Rathnayake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

TCC82 Pilecap Design-4 Caps

This document summarizes the design of a pile cap with 4 piles supporting a total load of 55.1 kN. It includes calculations of pile reactions, bending moments, steel reinforcement requirements, beam shear design, and punching shear checks. The pile cap is designed according to Eurocode 2 (EN 1992-1:2004) and includes reinforcement details for the bottom and top steel in the east-west and north-south directions. Design checks for bending capacity, shear capacity, and punching shear are provided and confirm the design is adequate.

Uploaded by

Harendra Rathnayake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Spreadsheets to Eurocode 2 The Concrete Centre

Client BigBucks PLC Made by Date Page


Location Pilecap E12 Rod 4-Dec-23 295
4 Pile Cap
PILECAP DESIGN to EN 1992-1: 2004 (without UK NA) Checked Revision Job No
Originated from TCC82.xls v 3.0 on CD © 2003-2006 TCC - - FB625

Cap load = 55.1 kN OVERTURNING MOMENTS - kNm characteristic


DEAD IMPOSED WIND
PILE REACTIONS kN Mx 0.0 0.0 0.0
PILE 1 PILE 2 PILE 3 PILE 4 My 0.0 0.0 0.0
Gk + Qk 510.0 510.0 510.0 510.0 .
Gk + Qk +Wk 510.0 510.0 510.0 510.0 .
1.35Gk + 1.5Qk 718.0 718.0 718.0 718.0
1.0Gk + 1.5Wk 313.8 313.8 313.8 313.8 .
1.35Gk + 1.5Qk + 0.75Wk 718.0 718.0 718.0 718.0

BENDING MOMENTS - kNm


1.35Gk + 1.5Qk 1.0Gk + 1.5Wk 1.35Gk + 1.5Qk + 0.75Wk
My v of col 598.9 258.3 598.9
My ^ of col 598.9 258.3 598.9 (including tolerance)
My < of col 598.9 258.3 598.9
My > of col 598.9 258.3 598.9

E-W STEEL BOTTOM TOP N-S STEEL BOTTOM TOP


Ø16 Ø8 Ø16 Ø8
M= 598.9 0.0 M= 598.9 0.0 K' = 0.2067
b= 2100 2100 b= 2100 2100 min As = 0.167%
d= 417.0 446.0 d= 401.0 438.0
K= 0.0469 0.0000 K= 0.0507 0.0000
z= 396.2 423.7 z= 381.0 416.1
As = 3477 0 As = 3616 0
Provide 3477 0 Provide 3616 0
No = 18 10 No = 18 10
As prov = 3619 503 As prov = 3619 503
σs = 298 10H8 T1 σs = 310 10H8 T2
Max S = 177.7 Max S = 162.8
Min S = 41.0 Min S = 41.0
S= 115.5 S= 115.5
18H16 B1 18H16 B2

BEAM SHEAR Crit section is 135.0 from pile centres


EW (NS plane) Ø10 links
VEd = 1436.0 b = 2100 ρl = 0.413% cotθ = 2.50
av = 540.0 vEd = 1.6398 vRd 2d/av = 0.7643 vRd,max = 4.152
Asw/S = 3.5201 No of legs = 10 Spacing = 200 10 LegsH10 @ 200 LINKS
NS (EW plane)
VEd = 1436.0 b = 2100 ρl = 0.430% cotθ = 2.50
av = 540.0 vEd = 1.7052 vRd 2d/av = 0.7506 vRd,max = 4.152
Asw/S = 3.6605 No of legs = 10 Spacing = 200 10 LegsH10 @ 200 LINKS

PUNCHING At column Face At . No critical perimeter


VEd = 2797.5 u1 = 3822 β = 1.000
vEd = 3.420 d ave = 409.0 vEd = 0.0000
vRd,max = 4.152 ok ρl = 0.421% vRd 2d/av = 1.4106 ok

You might also like