490-500Watt

132 HALF-CELL MONO PERC MODULE

• AE13HXXXTHC10B

Special Cell Design

10B technology decreases the distance between bus
bars and finger grid line which is benefit to power
increase. Half-cell aims to eliminate the cell gap to
increase module efficiency.

IP68 Rated Junction Box

The IP 68 rated junction box ensures an outstanding
waterproofing, supports installation in all orientations
IP68 with less stress on the cables. Highly reliable
performance with low resistance connectors ensures
maximum output for higher energy production.

High module conversion efficiency

Module efficiency up to 21.06% achieved through
High advanced cell technology and manufacturing
Efficiency
Trust Anchor to Deliver Reliable Performance Over Time process

• World-class manufacturer of crystalline silicon photovoltaic modules

Anchor current sorting process
• Rigorous quality control meeting the highest international standards: Up to 2 % power loss caused by current mismatch
ISO 9001, ISO 14001 and ISO17025
could be diminished by current sorting technique
• Regular independently checked production process from international to maximize system power output
accredited institute/company
• Tested for harsh environments
• Long-term reliability tests Excellent weak light performance
• 2 × 100% EL inspection ensuring defect-free modules More power output in weak light condition, such as
Weak light haze, clouds, early and late sun hours

Industry-leading Warranty based on nominal power Lower operating temperature

Lower operating temperature and temperature
• 98% in the first year; thereafter, for years two (2) through twenty five (25), coefficient increases the power output
0.55% maximum decrease from MODULE'S nominal power output per year, ending
with the 84.8% in the 25th year after the defined WARRANTY STARTING DATE.
• Product Warranty is of 12 Years**
Extended wind and snow load tests
• 25 year linear performance warranty
Module certified to withstand extreme wind
Industry leadi 2400Pa (2400 Pascal) and snow loads (5400 Pascal) *
100 % ng linear powe 5400Pa
r warranty
Warranted Power Output

98 %

84.8 % Withstanding Harsh Environment

80.2 %
Reliable quality leads to better sustainability
even in harsh environment like desert and
0 1 12 25 coastal area
Anchor linear warranty Standard linear warranty

BIS

* Please refer to PLSIND Standard Module Installation Manual for details. ** Please refer to PLSIND Product Warranty for details.

E-mail: [email protected] Doc No : Anchor_Mono Perc_132_490-500Wp_Do_00_(N)_11.05.23 www.Isin.panasonic.com

 • AE13HXXXTHC10B

Electrical Characteristics

STC AE13HxxxTHC10B
Wattage, Wp 490W 495W 500W
Voltage at Max Power, Vmax 38.47V 38.67V 38.87V
Open Circuit Voltage, Voc 44.97V 45.11V 45.27V
Current at Max Power, Imax 12.73A 12.78A 12.86A
Short Circuit Current, Isc 13.37A 13.41A 13.48A
Module Efficiency 20.64% 20.85% 21.06%
Operating Temperature (OC) 40OC ~ +85OC
Maximum System Voltage) 1500 V DC (IEC)
Maximum Series Fuse Rating 20 A
Power Tolerance -0, +4.99Wp

STC: lrradiance 1000 W/m2, Cell Temperature 25°C, AM=1.5

# PLSIND reserves the right to adjust the listed parameters without notice.

NOCT AE13HxxxTHC10B
Maximum Power at NOCT, Wp 369.1W 372.9W 376.7W
Voltage at Max Power, Vmax 34.98V 35.16V 35.34V
Open Circuit Voltage, Voc 42.45V 42.59V 42.73V
Current at Max Power, Imax 10.55A 10.60A 10.66A
Short Circuit Current, Isc 11.13A 11.19A 11.24A
PV Module : AE13H500THC10B NOCT: Irradiance 800 W/m2, ambient temperature 20 °C, AM=1.5, wind speed 1 m/s.
# PLSIND reserves the right to adjust the listed parameters without notice.

Temperature Characteristics
Temperature Coefficient of Pmax(γ) -0.36 %/°C
Temperature Coefficient of Voc(β) -0.36 %/°C
Temperature Coefficient of Isc(α) 0.06 %/°C
Nominal Module Operating Temperature (NMOT) 42±2°C

Mechanical Characteristics
I-V Curves of PV Module
Cell Type Mono PERC-crystalline 91mm x 182mm
No.of Cells 132 (11x6 || 11x6)
Dimensions 2093 x 1134 x 35 mm
Weight 26.65 kg
Front Glass 3.2mm, High Transmission, Low Iron, Tempered glass
Frame Anodized aluminium alloy
Junction Box 3 Split, IP68 Rated
4.0 mm2
Output Cables
(-) 1400 mm and (+) 1400 mm in Length
Connectors MC4 Compatible

Dealer Information Packing Configuration

Container 40' GP
Pieces per pallet 31
Pallets per container 22
Pieces per container 682

# PLSIND stands for Panasonic Life Solutions India Pvt. Ltd.

Panasonic Life Solutions India Pvt. Ltd.

Registered Office : 12th Floor, Ambience Tower, Ambience Island, NH-48, Gurugram, Haryana - 122 002.
In case of consumer complaints contact customer care executive: 3rd Floor, B Wing, I-Think Techno Campus, Pokhran Road No 2, Thane (west) - 400607, Maharashtra.
T: (9122) 42228888 I F: (9122) 42228888 | Customer care no.: (022) 41304130 | WhatsApp No: 91360 28606
Email: [email protected] | www.lsin.panasonic.com

Information on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may
vary slightly. All specifications are in accordance with standard EN 50380. Color differences of the modules relative to the figures as well as discolorations of/in the modules which do not impair their proper
functioning are possible and do not constitute a deviation from the specification.