0% found this document useful (0 votes)
398 views3 pages

Bosch BMSK Me9+ BMW

The document provides instructions for connecting a Bosch BMSK ME9+ BMW ECU in three ways: 1) Using the lay-by pins located in the lower part of the ECU. 2) Connecting directly to the first 10 pads on the left side by soldering pin strips or wires. 3) Using a DIMA adapter F34DM002 to connect a flat cable to the ECU.

Uploaded by

danieldario33
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
398 views3 pages

Bosch BMSK Me9+ BMW

The document provides instructions for connecting a Bosch BMSK ME9+ BMW ECU in three ways: 1) Using the lay-by pins located in the lower part of the ECU. 2) Connecting directly to the first 10 pads on the left side by soldering pin strips or wires. 3) Using a DIMA adapter F34DM002 to connect a flat cable to the ECU.

Uploaded by

danieldario33
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BOSCH BMSK ME9+ BMW

plugin 188

The lay-by pins are placed in the lower part of the ECU.

The following picture is merely indicative.

https://ecu.design
BOSCH BMSK ME9+ BMW

DIRECT CONNECTION
Among the 14 pads you will use only the first 10’s from the left, solder the guiding pin strips in
which you will place the strips otherwise you can solder directly the strips.
Place the ECU with the connector upwards and connect the flat cable F34NTF01 on the strips
having care to place the violet wire on the left side.

The following pictures are merely indicative.

https://ecu.design
BOSCH BMSK ME9+ BMW

DIMA CONNECTION
Use the DIMA adapter F34DM002.

The following picture of the DIMA connection is merely indicative.

https://ecu.design

You might also like