POE SYSTEM CONTROLLERS

IP-BASED POWER OVER ETHERNET (POE) PERIMETER CONTROL OPTIONS

INTREPID™ POE System Controllers provide flexible perimeter security management

options for Southwest Microwave’s IP-based POE detection technologies, enabling
the development of an alarm monitoring and control program to suit a facility’s
unique requirements. INTREPID™ POE Controllers offer scalable, plug-and-deploy
solutions to manage sites of any size or configuration, with features ranging from
local or remote relay control to centralized TCP / IP-based management of large or
multi-site applications. Perimeter Security Manager II (PSM II)

INTREPID™ POE Controllers conveniently and reliably manage INTREPID™ POE pe-
rimeter detection sensors, including Model 316-POE-S (CE), Model 334-POE-S and
Model 336-POE-S Digital Microwave Links and MicroPoint™-POE-S Fence Detection
System. These controllers enable the assignment of alarm inputs to specific perim-
eter zones. Zones may be visually depicted on a graphic user interface (GUI) and /
or trigger outputs such as relay closures and camera PTZ presets so that when a
perimeter breach is detected, precise visual assessment is achieved.
Control Module-POE-S
INTREPID™ POE Controllers seamlessly integrate INTREPID™ POE devices via TCP/IP
network communications protocol using a standard Ethernet connec­tion. Control
modules also manage auxiliary security devices and interface with assess­ment
equipment (CCTV / NVR) or other system outputs.

An INTREPID™ POE Software Development Kit (SDK) is available to developers at

no cost for high-level interface of INTREPID™ POE sensors into custom monitoring
and control applications.
INTREPID™ POE
Contact us at [email protected] or +1 (480) 783-0201 for further Software Development Kit (SDK)
information or to request INTREPID™ SDK documentation.
 POE SYSTEM CONTROLLERS

PERIMETER SECURITY MANAGER II (PSM II) KEY FEATURES

Perimeter Security Manager II (PSM II) is an advanced, SEAMLESS INTEGRATION OF SECURITY
Windows®-based security monitoring and control applica- DEVICES AND CAMERAS
tion that provides powerful intrusion detection system
INTUITIVE, ICON-BASED GUI WITH
management capabilities and ease of use. The system OPTIONAL TOUCH-SCREEN CONTROLS
is ideal for users seeking to manage numerous perim-
SECURE, 256-BIT AES ENCRYPTION AND
eter security devices and visual assessment tools across
TRANSPORT LAYER SECURITY (TLS)
single or multiple networked locations.
FLEXIBLE DISPLAY OF LIVE VIDEO AND
HIGH-RESOLUTION GRAPHIC MAPS
PSM II monitors, displays and controls Southwest Micro-
wave’s range of intelligent perimeter detection systems, PATENTED MIGRATING 3+ REDUNDANCY
including INTREPID™ Series II devices (MicroPoint™ II, CUSTOMIZABLE SCREENS AND EVENT-
MicroNet™ II, MicroTrack™ II, MicroWave 330) and POE HANDLING PROCESSES
sensors. The system also seamlessly manages contact- SCALABLE, WINDOWS®-BASED TCP/IP
closure auxiliary security devices, and facilitates high- ARCHITECTURE
level interface to CCTV cameras, digital or network video EASY SITE NAVIGATION VIA
recorders and monitors. CUSTOMIZABLE ‘PORTALS’

Refer to Southwest Microwave’s Perimeter Security Man-

ager II data sheet for complete details and features.

CONTROL MODULE-POE-S (CM-POE-S) KEY FEATURES

The CM-POE-S is a System Controller designed to provide IP-BASED WITH BUILT-IN POE
midsized facilities with robust local or remote control of
FULLY HARDENED DESIGN
INTREPID™ POE sensors, contact-closure auxiliary secu-
rity devices and CCTV monitoring equipment. It is sup- INTUITIVE ON-BOARD SET-UP SOFTWARE
plied as a self-contained module and features intuitive, BUILT-IN WEB SERVER
software-based system configuration, zone assignment 16 ON-BOARD RELAYS TO DELIVER
and management. The CM-POE-S features built-in POE CRITICAL MESSAGES
and TCP/IP network communications for local or remote CONNECTS UP TO 32 INTREPID™
sensor configuration and alarm monitoring. DEVICES
SUPPORTS 128 ZONES (4IN / 4OUT)
The CM-POE-S functions as Pollmaster, polling all
INTREPID™ POE devices discovered on its network LOCAL OR REMOTE ADMINISTRATION
AND ALARM MONITORING
for status. When an intrusion attempt is detected from
any INTREPID™ device or auxiliary input, a command EVENT LOG & CONFIGURATION REPORTS
is issued to the appropriate local relay output(s).

INTREPID™ POE SOFTWARE DEVELOPMENT KIT (SDK)

Software Development Kit (SDK) is available at no-cost to developers for high-level integration between
INTREPID™ POE detection sensors and custom monitoring and control applications. This flexible control
option enables interface between a user’s preferred VMS or PSIM application and INTREPID™ POE sensors
and auxiliary devices.

The INTREPID™ Polling Protocol II (IPP II) standard, developed by Southwest Microwave, Inc., is an applica-
tion layer protocol using packet/frame format that provides Master/Slave communications between third
party control equipment and INTREPID™ POE sensors over an IP network.

Refer to Southwest Microwave’s POE SDK development document for integration capabilities and
development details.
 POE SYSTEM CONTROLLERS

POE SENSOR CONTROLLER AND DEVICE CONFIGURATION

Each INTREPID™ POE Sensor Controller can communicate with any combination of INTREPID™ POE devices via an open-architec-
ture TCP/IP network communications protocol.
Though Supported By PSM
D1 D3 D5 II/SDK, Devices Above 32
D7
Are Not Shown

System
TCP/IP Network
Controller
Devices 9-31
D2 D4 D6 D8 Omitted For *D32
Clarity

Devices Above Can Be Any Combination Of The Following:

Control Module-POE-S (CM-POE-S) Model 316T-POE-S Transmitter (316-POE-S)

Perimeter Security Manager II (PSM II) Model 316R-POE-S Receiver (316-POE-S)
Software Development Kit (SDK) Model 336T-POE-S Transmitter (336-POE-S)
Model 336R-POE-S Receiver (336-POE-S)
Model 334T-POE-S Transmitter (334-POE-S)
Model 334R-POE-S Receiver (334-POE-S)
Processor Module-POE-S (PM-POE-S)
CONTROLLER DEVICES OUTPUTS ZONES Model 390 Transceiver (390)
* CM-POE-S 32 Relays 128 Model 395 Transceiver (395)
PSM II Unlimited Graphic Map Unlimited Relay Output Module-POE-S (ROM-POE-S)
Sixteen-(16) User Assigned SPDT Relay Outputs
CCTV/NVR Drivers
Relays Alarm Input Module-POE-8S (AIM-POE-8S)
Eight (8) Field Selectable NO or NC
SDK Unlimited Graphic Map Unlimited Supervised/Unsupervised Inputs

Relays
* CM-POE-S supports a maximum of thirty-two-(32) devices and 128-Zones (4in/4out).

PM-POE-S
Tx Tx
Rx Rx

Tx Tx

Legacy/Third Party Relay Outputs For Third Party

External Sensor Inputs System Triggering
TUII

TUII
TUII

TUII

AIM-POE-8S ROM-POE-S

TCP/IP Network
Rx
Rx

Rx Tx Tx Rx

PM-POE-S

Sensor communication & DC power provided by POE

enabled TCP/IP based Ethernet network.

Fence
MicroPoint™ Sensor Cable Laptop with IST for local/remote PSM II or 3rd Party CM-POE-S
- or -
Power Supply Equipment (PSE) configuration/maintenance HLI to PSIM / VMS
 POE SYSTEM CONTROLLERS SPECIFICATIONS
PERIMETER SECURITY MANAGER II (PSM II) CONTROL MODULE-POE-S (CM-POE-S)
Refer to Perimeter Security Manager II data sheet for Specifications. Size: 218 H x 333 W x 108 D mm (8.59 x 13.11 x 4.26 in)
Weight: 1.1 kg (2.5 lbs)
Operating Temperature: -40° C to 70° C (-40° F to 158° F)
POE: Power over Ethernet, IEEE 802.3af, Class 0
Power Requirements: 2.2 Watts typical
Ethernet: RJ-45 connector, 10/100 Base-T
Outputs: 16 fully sealed relays, SPDT (Form 1C). Conforms to FCC
POE SOFTWARE DEVELOPMENT KIT (SDK)
Part 68 requirements for coil to contacts (1,500 V, 10 × 160 μs)
Supported Browsers: Internet Explorer 11, Edge 40, Firefox 54,
INTREPID POE Communications: Refer to Southwest Microwave
Chrome 59 or higher.
Document #57A47169-A01 for Specifications. Security Protocol: TLS 1.2, supports X.509v3 Public Key
Infrastructure Certificates
M2M Communications:
- Protocol: IPP over TCP, 2 connections
- SDK available
LED Indicators: Relay outputs
Languages: English
Enclosure Rating: IP66

INTREPID™ POE INPUT / OUTPUT MODULES

The INTREPID™ Alarm Input Module-POE-8S (AIM-POE-8S) and Relay Output Module-POE-S (ROM-POE-S) are self-contained fully-hardened
modules that provide simple interface to contact-closure controlled alarm inputs or relay outputs that do not communicate using the
INTREPID™ POE communications protocol. Each module features user-friendly on-board set-up software.

Alarm Input Module-POE-8S (AIM-POE-8S): Allows the incorporation of auxiliary devices – such as Southwest Microwave’s conventional
digital or analog microwave sensors, gate and door contacts or other alarm contacts. Provides 8 supervised contact-closure inputs.*

Relay Output Module-POE-S (ROM-POE-S): Provides simple local interface to CCTV equipment, legacy alarm panels, perimeter lighting
or other relays. Provides 16 relay outputs.*

* An INTREPID™ POE System Controller such as CM-POE-S or PSM II is required to configure the inputs / outputs of the AIM-POE-8S and ROM-POE-S.

ALARM INPUT MODULE-POE-8S (AIM-POE-8S) RELAY OUTPUT MODULE-POE-S (ROM-POE-S)

Size: 140 H x 343 W x 127 D mm (5.5 x 13 x 5 in) Size: 218 H x 333 W x 108 D mm (8.59 x 13.11 x 4.25 in)
Weight: 1.1 kg (2.5 lbs) Weight: 1.1 kg (2.5 lbs)
Operating Temperature: -40° C to 70° C (-40° F to 158° F) Operating Temperature: -40° C to 70° C (-40° F to 158° F)
POE: Power over Ethernet, IEEE 802.3af, Class 0 POE: Power over Ethernet, IEEE 802.3af, Class 0
Power Requirements: 2.2 Watts typical Power Requirements: 2.2 Watts typical
Ethernet: RJ-45 connector, 10/100 Base-T Ethernet: RJ-45 connector, 10/100 Base-T
Inputs: 8 field selectable NO or NC supervised / unsupervised inputs Outputs: 16 fully sealed relays, SPDT (Form 1C). Conforms to FCC
DC Output: 12.0VDC, 400mA Part 68 requirements for coil to contacts (1,500 V, 10 × 160 μs)
Supported Browsers: Internet Explorer 11, Edge 40, Firefox 54, Supported Browsers: Internet Explorer 11, Edge 40, Firefox 54,
Chrome 59 or higher. Chrome 59 or higher.
Security Protocol: TLS 1.2, supports X.509v3 Public Key Security Protocol: TLS 1.2, supports X.509v3 Public Key
Infrastructure Certificates Infrastructure Certificates
M2M Communications: M2M Communications:
- Protocol: IPP over TCP, 2 connections - Protocol: IPP over TCP, 2 connections
- SDK available - SDK available
LED Indicators: Communication status, alarm, pulse LED Indicators: Relay outputs
Languages: English Languages: English
Enclosure Rating: IP66 Enclosure Rating: IP66

INTREPID™, MicroTrack™, MicroPoint™ and MicroNet™ are trademarks of Southwest Microwave, Inc. Windows® is a
registered trademark of Microsoft Corporation. Specifications subject to change without notice.

USA (CORPORATE HEADQUARTERS): Southwest Microwave, Inc., Arizona, USA | Telephone +1 (480) 783-0201
EUROPEAN OFFICES: Southwest Microwave Ltd., Worcestershire, UK | Telephone +44 1386 75 15 11

Rev: 12/2020 | ©2020 Southwest Microwave, Inc. All rights reserved. www.southwestmicrowave.com