Scribd
Upload
182 views2 pages

Ece 131 Basic Electrical and Electronics Engineering Syllabus

This document outlines the syllabus for the ECE131 Basic Electrical and Electronics Engineering course. The course aims to teach students fundamental circuit analysis skills for both DC and AC circuits, operating principles of electrical machines and semiconductor devices, and applications of filters, operational amplifiers, embedded systems and IoT. The syllabus is divided into 6 units covering topics such as circuit analysis techniques, AC circuits, electrical machines, semiconductor devices, filters and operational amplifiers, and embedded systems and industrial applications. References for the course include textbooks on electrical engineering fundamentals, electronics, and embedded systems.

Uploaded by

tukutanigel423
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views2 pages

Ece 131 Basic Electrical and Electronics Engineering Syllabus

This document outlines the syllabus for the ECE131 Basic Electrical and Electronics Engineering course. The course aims to teach students fundamental circuit analysis skills for both DC and AC circuits, operating principles of electrical machines and semiconductor devices, and applications of filters, operational amplifiers, embedded systems and IoT. The syllabus is divided into 6 units covering topics such as circuit analysis techniques, AC circuits, electrical machines, semiconductor devices, filters and operational amplifiers, and embedded systems and industrial applications. References for the course include textbooks on electrical engineering fundamentals, electronics, and embedded systems.

Uploaded by

tukutanigel423
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

lOMoARcPSD|34366602

ECE 131 Basic electrical and electronics engineering


Syllabus
Basic electronics (Lovely Professional University)

Studocu is not sponsored or endorsed by any college or university


Downloaded by NIGEL TUKUTA ([email protected])
lOMoARcPSD|34366602

ECE131:BASIC ELECTRICAL AND ELECTRONICS ENGINEERING

Course Outcomes: Through this course students should be able to

CO1 :: understand the fundamental behaviour of circuit elements and solve dc networks by
different circuit reduction techniques

CO2 :: understand the fundamental behaviour and notations of AC circuits and solve AC circuit
problems

CO3 :: discuss the working principles and applications of transformers and motors

CO4 :: analyze the working of various semiconductor devices and its applications

CO5 :: analyze the working of operational amplifiers and filters in electronic devices

CO6 :: analyze the applications of IOT and embedded system in various fields

Unit I
Fundamentals of D.C. circuits : resistance, inductance, capacitance, voltage, current, power and
energy concepts, ohm's law, Kirchhoff’s laws, basic method of circuit analysis, intuitive method of
circuit analysis- series and parallel simplification, voltage division rule, current division rule, star–delta
transformation, mesh and nodal analysis, introduction to dependent and independent sources,
network theorems- superposition theorem, Thevenin’s theorem, Norton’s theorem, maximum power
transfer theorem
Unit II
Fundamentals of A.C. circuits : alternating current and voltage, concept of notations ( i, v, I, V),
definitions of amplitude, phase, phase difference, RMS value and average value of an AC signal,
complex representation of impedance, steady state analysis of ac circuits consisting of RL, RC and
RLC (series), resonance in series RLC circuit, power factor and power calculation in RL, RC and RLC
circuits, three-phase circuits- numbering and interconnection (delta or mesh connection) of three
phases, relations in line and phase voltages and currents in star and delta
Unit III
Fundamentals of electrical machines : Fleming’s left hand and right hand rule, mutual inductance
and mutual coupling phenomena in transformer, transformer – working, concept of turns ratio and
applications, transformer on DC, instrument transformers, auto-transformer, dc machines- working
principles, classification, starting, speed control and applications of dc motors, working principle of
single and three phase induction motors, applications of ac motors
Unit IV
Fundamentals of semiconductor devices and digital circuits : digital abstraction- voltage levels
and the static discipline, boolean logic, combinational gates, fan-in and fan-out of gates, noise margin
in details, pn junction and zener diode characteristics and analysis, testing of diodes and its
applications, basic operation and testing of BJT, MOSFET representation and its characteristics,
handling of integrated circuits-ESD phenomena
Unit V
Fundamentals of filters and operational amplifier : filter examples- band-pass filter, low-pass
filter, high-pass filter, operational amplifier abstraction- device properties of the operational amplifier,
simple op amp circuits – virtual ground concept, inverting and non-inverting op-amp, op-amp as an
adder and subtractor, op-amp RC circuits – op-amp integrator, op-amp differentiator, op-amp as a
comparator and its application in anti-lock braking systems
Unit VI
Fundamentals of embedded system and its application in industrial processes : comparison
of microprocessor and micro-controller, types of processors : SOC, ASIC, DSP and FPGA, introduction
to embedded system, examples of real-time applications of embedded system : GPOS and RTOS,
cyber physical world, role of IOT and cloud computing in condition monitoring of plant processes,
health care, agriculture, manufacturing, automobiles and smart grid

Text Books:
1. FOUNDATIONS OF ANALOG AND DIGITAL ELECTRONIC CIRCUITS by AGARWAL, ANANT,
AND JEFFREY H. LANG., ELSEVIER
References:
1. FUNDAMENTALS OF ELECTRICAL ENGINEERING AND ELECTRONICS by B.L.THERAJA, S.
CHAND & COMPANY
2. INTRODUCTION TO ELECTRONICS by EARL GATES, DELMAR - CENGAGE LEARNING

3. BASIC ELECTRICAL ENGINEERING by D.C. KULSHRESTHA, MC GRAW HILL

4. INTRODUCTION TO EMBEDDED SYSTEMS by K. V. SHIBU, MC GRAW HILL

Session 2020-21 Page:1/1

Downloaded by NIGEL TUKUTA ([email protected])

You might also like