MODUL 100° hinge

Product Description Application

- All metal hinge, nickel plated
- 100° opening angle
- with or without closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
overlay application (lay-on door) for dual or twin application for inset application

Boss: Boss: Boss:

Screw-on Part no. Screw-on Part no. Screw-on Part no.
Steel boss with spring 91M2550 Steel boss with spring 91M2650 Steel boss with spring 91M2750
Steel boss unsprung 90M2550 Steel boss unsprung 90M2650 Steel boss unsprung 90M2750

Boss: 11 MZM.0011 Boss: 11 MZM.0011 Boss: 11 MZM.0011

Knock-in Knock-in Knock-in
Steel boss with spring 91M2580 Steel boss with spring 91M2680 Steel boss with spring 91M2780
Steel boss unsprung 90M2580

Cover caps Cover caps Cover caps

plain plain plain
steel nickel plated 90M2503 steel nickel plated 90M2603 steel nickel plated 90M2603
stamped blum logo printed blum logo printed blum logo
steel nickel plated 90M2503.BP steel nickel plated 90M2603.BL steel nickel plated 90M2603.BL

can be printed with customer logo - minimums can be printed with customer logo - minimums can be printed with customer logo - minimums
from 1000 pcs from 1000 pcs from 1000 pcs

Chipboard screws for hinge boss Mounting plates

fixing 3.16
3.5 x 15 mm 609.1500 Accessories
3.5 x 17 mm 609.1700 3.20
Assembly devices
9.2
Assembly and adjustment
3.21
More technical details
10.1

3.2
 100°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Hinge and door protrusion at full opening angle

20 30 38

58
58
58

3-6
3-6 3-6

F
9 11 18.5 1.5 F 27
F
7

F Gap Set mounting plate back by door thickness

TA TA TA
5 6 7 8 9 10 11 12 13 14 15 16 17 -4.5 -3.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 -4 -3 -2 -1
TB 3 4 5 6 0 TB 3 4 5 6 0 TB 3 4 5 6 0
3 4 5 6 3 3 4 5 6 3
3 4 5 6 6 3 4 5 6 6
3 4 5 6 9 3 4 5 6 9
MD MD MD
TA Door overlay
TB Drilling distance
MD Mounting plate spacing

Minimum gap requirement in mm based on doors with radiused edges (R = 1 mm) Adjustments

TS
+
16 18 19 20 22 24 26 28 30 32
TB - -
3 0.5 0.9 1.1 1.4 2.3 3.6 +
- +
4 0.5 0.8 1.0 1.3 2.0 3.3
AV
5 0.4 0.8 1.0 1.2 1.8 3.0 max. ± 3 mm ± 2 mm ± 2 mm
6 0.4 0.8 0.9 1.1 1.7 2.8 see mounting
plates
TS Door thickness
TB Drilling distance
AV A trial application is recommended

Screw-on Knock-in Hinge boss dimensions

min 10.5 min 10.5 57 3.2

3-6

3-6
9.5

35 35
8

37

45

3.3
MODUL 170° hinge
Product Description Application
- All metal hinge, nickel plated
- 170° opening angle
- with or without closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
overlay application (lay-on door) for dual or twin application for inset application

Boss: Boss: For inset application use hinges for twin appli-
Screw-on Part no. Screw-on Part no. cation and a 9 mm spaced mounting plate
Steel boss with spring 91A6550 Steel boss with spring 91A6650
Steel boss unsprung 90A6550 Steel boss unsprung 90A6650

Boss: 18 MZM.0018 Boss: 18 MZM.0018

Knock-in Knock-in
Steel boss with spring 91A6580 Steel boss with spring 91A6680
Steel boss unsprung 90A6580

Cover caps Cover caps

plain plain
steel nickel plated 80.6507 steel nickel plated 80.6507
printed blum logo printed blum logo
steel nickel plated 80.6507.BL steel nickel plated 80.6507.BL

can be printed with customer logo - minimums can be printed with customer logo - minimums
from 1000 pcs from 1000 pcs Warning:
If young children have access to furniture with
170° hinges, it is strongly recommended to
avoid injury, that safety catches be fitted to the
cabinets.

Opening angle Warning Mounting plates

130
stop 10.3 3.16
130° Warning: Accessories
clip-on When using MODUL wide angle hinges in 3.20
Nylon black ☎ 70.6103 wardrobes, please make sure that the ward- Assembly devices
robe is deep enough (min. 600 mm) so that 9.2
Chipboard screws for hinge boss clothing does not interfere with the hinge link Assembly and adjustment
fixing mechanism. 3.21
3.5 x 15 mm 609.1500 More technical details
3.5 x 17 mm 609.1700 10.1

3.4
 170°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm or 9 mm)
Hinge and door protrusion at 90° opening angle

max 65 max 75 max 84

69

69

69
3-8
3-8
3-8

F
8 11 17.5 1.5 F 26.5 F
7.5

F Gap Set mounting plate back by door thickness

TA TA TA
5 8 9 10 11 12 13 14 15 16 17 18 19 -4.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 -4.5 -3.5 -2.5 -1.5 0.5
TB 3 4 5 6 7 8 0 TB 3 4 5 6 7 8 0 TB 3 4 5 6 7 9
3 4 5 6 7 8 3 3 4 5 6 7 8 3
3 4 5 6 7 8 6 3 4 5 6 7 8 6
3 6 7 8 9 3 6 7 8 9
MD MD MD
TA Door overlay
TB Drilling distance
MD Mounting plate spacing

Minimum gap requirement in mm based on Adjustments

doors with radiused edges (R = 1 mm)

+
- -
for doors up to 21 mm thick no gap is required +
- +
for doors in excess of 22 mm thick a trial is
recommended max. ± 3 mm ± 2 mm ± 2 mm
see mounting
plates

Screw-on Knock-in Hinge boss dimensions

min 11 min 11 57 2.2

3-8

3-8
9.5

35 35
8

47

45

3.5
MODUL profile door hinge
Product Description Application
- All metal hinge, nickel plated
- Hinge for thick doors and doors with profile
- 95° opening angle
- with closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
overlay application (lay-on door) for dual or twin application for inset application

Boss: Boss: Boss:

Screw-on Part no. Screw-on Part no. Screw-on Part no.
Steel boss with spring 91M9550 Steel boss with spring 91M9650 Steel boss with spring 91M9750

Boss: 11 MZM.0011 Boss: 11 MZM.0011 Boss: 11 MZM.0011

Knock-in Knock-in Knock-in
Steel boss with spring 91M9580 Steel boss with spring 91M9680 Steel boss with spring 91M9780

Cover caps Cover caps Cover caps

plain plain plain
steel nickel plated 90M2503 steel nickel plated 94M3603 steel nickel plated 94M3603
stamped blum logo
steel nickel plated 90M2503.BP

can be printed with customer logo - minimums can be printed with customer logo - minimums can be printed with customer logo - minimums
from 1000 pcs from 1000 pcs from 1000 pcs

Chipboard screws for hinge boss Mounting plates

fixing 3.16
3.5 x 15 mm 609.1500 Accessories
3.5 x 17 mm 609.1700 3.20
Assembly devices
9.2
Assembly and adjustment
3.21
More technical details
10.1

3.6
 95°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Hinge and door protrusion at full opening angle

22 31 40

58
58
58

3-7
3-7 3-7

F F
14.5 24 1.5 32.5 F
11 7

F Gap Set mounting plate back by door thickness

TA TA TA
5 7 8 9 10 11 12 13 14 15 16 17 18 -4.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 -4 -3 -2 -1 0
TB 3 4 5 6 7 0 TB 3 4 5 6 7 0 TB 3 4 5 6 7 0
3 4 5 6 7 3 3 4 5 6 7 3
3 4 5 6 7 6 3 4 5 6 7 6
3 5 6 7 9 3 5 6 7 9
MD MD MD
TA Door overlay
TB Drilling distance
MD Mounting plate spacing

Minimum gap requirement in mm based on doors with radiused edges (R = 1 mm) Adjustments

TS
+
16 18 19 20 22 24 26 28 29 30 31 32
TB - -
3 0.1 0.3 0.4 0.5 0.9 1.3 1.8 2.6 3.1 3.8 4.5 5.4 +
- +
4 0.1 0.3 0.4 0.5 0.9 1.3 1.8 2.5 2.9 3.5 4.1 4.8
5 0.1 0.3 0.4 0.5 0.9 1.3 1.8 2.4 2.8 3.3 3.8 4.4 max. ± 3 mm ± 2 mm ± 2 mm
6 0.1 0.3 0.4 0.5 0.9 1.2 1.7 2.3 2.7 3.2 3.6 4.1 see mounting
7 0.1 0.3 0.4 0.5 0.9 1.2 1.7 2.1 2.6 3.1 3.4 3.9 plates
TS Door thickness
TB Drilling distance

Screw-on Knock-in Hinge boss dimensions

min 12 min 12 57 3.2

3-7
3-7

9.5

35 35
37
8

45

3.7
MODUL blind corner hinge
Product Description Application
- All metal hinge, nickel plated
- 95° opening angle
- with closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification

Boss:
Screw-on Part no.
Steel boss with spring 99M9550

Boss: 19 MZM.0019
Knock-in
Steel boss with spring 99M9580

Mounting plate
Zinc nickel plated 199.8130

Cover caps
plain
steel nickel plated 90M2503
stamped blum logo
steel nickel plated 90M2503.BP

can be printed with customer logo - minimums

from 1000 pcs

Chipboard screws for hinge boss Mounting plates

fixing 3.16
3.5 x 15 mm 609.1500 Accessories
3.5 x 17 mm 609.1700 3.20
Assembly devices
9.2
Assembly and adjustment
3.21
More technical details
10.1

3.8
 95°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 3 mm)
Hinge and door protrusion at full opening angle

min 69 Fixing position from inside edge of muntin: 14 mm

min 28 Special mounting plate for blind corner application: 199.8130

F Gap
3-7
23

14
8
33 F

Minimum gap requirement in mm based on doors with radiused edges (R = 1 mm) Adjustments

TS
+
17 18 19 20 22 24 26 28 30 32
TB - -
3 0.2 0.3 0.4 0.5 0.9 1.3 +
- +
4 0.2 0.3 0.4 0.5 0.9 1.3
5 0.2 0.3 0.4 0.5 0.9 1.3 AV max. ± 3 mm ± 2 mm ± 0.8 mm
6 0.2 0.3 0.4 0.5 0.9 1.2 see mounting
7 0.2 0.3 0.4 0.5 0.9 1.2 plates
TS Door thickness
TB Drilling distance
AV A trial application is recommended

Screw-on Knock-in Hinge boss dimensions

min 12 min 12 57 3.2

3-7

3-7
9.5

35 35
37
8

45

3.9
MODUL nil protrusion hinge
Product Description Application
- All metal hinge, nickel plated
- for cabinets with inner drawers or pull-outs
- 153° opening angle
- with closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
overlay application (lay-on door)

Boss:
Screw-on Part no.
Zinc boss with spring 91.7500.01

Boss: 17 MZM.0017
Knock-in
Zinc boss with spring ☎ 91.7530.01

Cover caps
plain
steel nickel plated 80.6507
printed blum logo
steel nickel plated 80.6507.BL

can be printed with customer logo - minimums

from 1000 pcs

Chipboard screws for hinge boss Mounting plates

fixing 3.16
3.5 x 15 mm 609.1500 Accessories
3.5 x 17 mm 609.1700 3.20
Assembly devices
9.2
Assembly and adjustment
3.21
More technical details
10.1

3.10
 153°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Hinge and door protrusion at 90° opening angle

max 56
67

3-6

F
0 12

F Gap

TA
6 7 8 9 10 11 12 13 14 15 16 17 18
TB 3 4 5 6 0
3 4 5 6 3
3 4 5 6 6
3 4 5 6 9
MD
TA Door overlay
TB Drilling distance
MD Mounting plate spacing

Minimum gap requirement in mm based on doors with radiused edges (R = 1 mm) Adjustments

TS
+
16 18 19 20 22 24 26 28 30 32
TB - -
3 1.5 3.5 4.5 5.4 7.5 +
- +
4 0.5 2.2 3.3 4.3 6.5
AV
5 0 1.5 2.3 3.3 5.5 max. ± 3 mm + 1 mm ± 1 mm
6 0 0.5 1.3 2.1 4.5 see mounting - 3 mm
plates
TS Door thickness
TB Drilling distance
AV A trial application is recommended

Screw-on Knock-in Hinge boss dimensions

min 12 min 12 57 3.5

3-6

3-6
9.5
9.5

35 35
37
8

45
45

3.11
MODUL refrigerator / appliance hinge
Product Description Application
- All metal hinge, nickel plated
- Shallow hinge arm height 1
- Hinge for refrigerator or appliance doors
- 94° opening angle
- with closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
overlay application (lay-on door)

Boss:
Screw-on Part no.
Zinc boss with spring 91M0500.21

Boss: ☎
Knock-in
Zinc boss with spring 91M0530.21

Cover caps
plain
steel nickel plated 90M2503
stamped blum logo
steel nickel plated 90M2503.BP

can be printed with customer logo - minimums

from 1000 pcs

Chipboard screws for hinge boss Mounting plates

fixing 3.16
3.5 x 15 mm 609.1500 Accessories
3.5 x 17 mm 609.1700 3.20
Assembly devices
9.2
Assembly and adjustment
3.21
More technical details
10.1

3.12
 94°

Installation dimensions
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Hinge and door protrusion at full opening angle

16
57

3-5

F
5 10.5

F Gap

TA
4.5 5.5 6.5 7.5 8.5 9.5 10.511.5 12.513.514.515.5
TB 3 4 5 0
3 4 5 3
3 4 5 6
3 4 5 9
MD
TA Door overlay
TB Drilling distance
MD Mounting plate spacing

Minimum gap requirement in mm based on doors with radiused edges (R = 1 mm)

TS
+
16 18 19 20 22 24 26 28 30 32
TB - -
3 1.1 2.2 3.0 3.8 5.5 +
- +
4 1.1 2.0 2.7 3.5 5.0
AV
5 1.1 1.8 2.4 3.0 4.6 max. ± 3 mm + 0 mm ± 2 mm
see mounting - 4 mm
plates
TS Door thickness
TB Drilling distance
AV A trial application is recommended

Screw-on Knock-in Hinge boss dimensions

min 12.5 min 12,5 57 2.5

3-5

3-5
9.5
9.5

35 35
37
8

45

45

3.13
MODUL 45° angled hinge
Product Description Application
- All metal hinge, nickel plated
- 45° angled hinge
- For corner cabinets with flush fronts
- 107° opening angle
- with closing mechanism (spring)
- Slide on hinge arm
- 3-dimensional adjustment (with relevant
mounting plate)

Order specification
Boss: Chipboard screws for hinge boss
Screw-on Part no. fixing
Steel boss with spring 99M1550 3.5 x 15 mm 609.1500
3.5 x 17 mm 609.1700
Boss: 20 MZM.0020
Knock-in buffer stop
Steel boss with spring 99M1580 self adhesive Mounting plates
3.16
Cover caps Nylon 993.704 Accessories
plain 3.20
steel nickel plated 90M2503 Assembly devices
stamped blum logo 9.2
steel nickel plated 90M2503.BP Assembly and adjustment
3.21
can be printed with customer logo - minimums More technical details
from 1000 pcs 10.1

Application and installation dimensions

Important: altered if either thickness varied from 19 mm. plate to be moved from the standard fixing
These dimensions are based on a 19 mm A trial application is recommended. positions.
thick carcase. Dimensions would need to be Some applications require the mounting

Corner unit

32

LW
59

5
5
8
1.

37

37

TB = LW - 3.6 mm
6.
1

2.5
13.3 LW Internal width
TB Door width

3.14
 45
107

45° 45° 45°

35 32
50

64

67
76

44

46.5
55.5
2

4
5

5
5

5.5 2.5
16.3 13.3
31.3

Part no.
Mounting plate 195H9100.22 Use 3 mm spaced mounting plate Use 0 mm spaced mounting plate

Adjustments
+
- -
- + +
max. ± 3 mm ± 1.8 mm ± 2 mm
see mounting
plates

Screw-on Knock-in Hinge boss dimensions

min 11.5 min 11.5 57 3.2
3-6
3-6

9.5

35 35
8

37

45

3.15
MODUL mounting plates
Table of contents
Height adjustment Chipboard screws System screws Split dowels Knock-in dowels
(EXPANDO)

non height adjustable 3.16

height adjustable 3.18
Cam

Elongated hole 3.16 3.17 3.18

Screws (two-part) 3.16 3.17
Cam

Horizontal mounting plate

- Material: Zinc die-cast, H H Height
zinc plated
- Assembly with chip-
board screws Ø3.5 mm
*
- recommended screw * fix with addi-
15

length 17mm tional screw if

66 - non height adjustable
* used with wide
angle hinges
32 29

Spacing Height Part no.

0 mm 9.2 mm 195.5100

Cruciform mounting plate

- Material: Steel, nickel H H Height
plated
- Fixing with chipboard *
screws Ø3.5 mm and
Ø4 mm * fix with addi-
- with height adjustment tional screw if
53

± 3mm * used with wide

32

58 - recommended screw angle hinges

length 17mm
Spacing Height Part no. 37
0 mm 8.3 mm 193L6100
3 mm 11.3 mm 193L6130

Cruciform mounting plate

- Material: Zinc die-cast, H H Height
nickel plated
- Fixing with chipboard *
screws Ø3.5 mm and
Ø4 mm * fix with addi-
- with height adjustment tional screw if
± 2mm * used with wide
44

32

62
.5 - recommended screw angle hinges
length 17mm Spacing Height Part no.
0 mm 9.2 mm 195H7100 37
3 mm 12.2 mm 195H7130
9 mm 18.2 mm 195H7190

3.16
Cruciform mounting plate
- Material: Steel, nickel H H Height
plated
- Fixing with pre-moun- min 11.5 mm
*
ted system screws Ø6
mm * fix with addi-
- with height adjustment tional screw if

5
53

± 3mm used with wide

*

32
58 angle hinges

Spacing Height Part no. 37

0 mm 8.3 mm 193L8100
3 mm 11.3 mm 193L8130

Cruciform mounting plate for twin application

- Material: Steel, nickel H H Height
plated
min 8.5 mm
- Fixing with pre-moun- *
ted system screws Ø6
mm for twin application * additional
- with height adjustment screw required
53

± 3mm 5 as standard
58 32
*

Spacing Height Part no. 37

0 mm 8.3 mm 193L8100.21

Cruciform mounting plate for blind corner applications

- Material: Zinc die-cast, H
nickel plated
- Fixing with pre-moun- min 11.5 mm
ted system screws Ø6
mm
- for blind corner appli-
50

cations H Height
32

- With height adjustment 5

28
± 2mm
14
Spacing Height Part no.
3 mm 12.2 mm 199.8130

Cruciform mounting plate

- Material: Zinc die-cast, H H Height
nickel plated
- Fixing with system min 11.5 mm
*
screws Ø6 mm x 14.5
mm (661.1450) * fix with addi-
- with height adjustment tional screw if
5

*
44

± 2mm used with wide

32

62
.5 Spacing Height Part no. angle hinges
0 mm 9.2 mm 195H9100
3 mm 12.2 mm 195H9130 37
9 mm 18.2 mm 195H9190
18 mm 27.2 mm ☎195H9100.22
3.17
MODUL mounting plates
Cruciform mounting plate
- Material: Steel, nickel H H Height
plated
- Fixing with pre-moun- min 11.5 mm
ted system screws Ø6
mm * fix with addi-
- with height adjustment 5 tional screw if
53

± 3mm used with wide

32
* angle hinges
58

28
Spacing Height Part no.
0 mm 8.3 mm 193L8300.22

Cruciform mounting plate

- Material: Steel, nickel H H Height
plated
- Fixing with pre-moun- * min 11.5 mm
ted special dowels
- with height adjustment * fix with addi-
± 2mm tional screw if

5
53

* used with wide

32 angle hinges
58

Spacing Height Part no. 37

0 mm 8.3 mm 194E6100.ED
3 mm 11.3 mm 194E6130.ED

Cruciform mounting plate for twin application

- Material: Steel, nickel H H Height
plated
min 7.5 mm
- Fixing with pre-moun- *
ted special screws with
split dowels, for twin * additional
application screw required
53

- with height adjustment 5 as standard

± 2mm
32

58
*

Spacing Height Part no. 37

0 mm 8.3 mm 194E610Z

Horizontal mounting plate

- Material: Zinc die-cast, H H Height
nickel plated
- Knock-in assembly min 11.5 mm
with pre-fixed dowels
19

- with height adjustment

± 2mm
10

57.
5
32 20
Assembly with insertion ram only
50 MZM.0050
Spacing Height Part no.
0 mm 9.2 mm 197M6100

3.18
MODUL cover caps

Hinge applications straight hinge arm cranked hinge arm

double cranked arm
100°
Profile door
Blind corner
Refrigerator / Appliance

Material: Material:
steel steel
plain stamped plain printed
90M2503 90M2503.BP 90M2603 90M2603.BL
can be printed with customer logo - minimums can be printed with customer logo - minimums
from 1000 pcs from 1000 pcs

170°
Zero protrusion hinge

Material: Material:
steel steel
plain printed plain printed
80.6507 80.6507.BL 80.6507 80.6507.BL
can be printed with customer logo - minimums can be printed with customer logo - minimums
from 1000 pcs from 1000 pcs

Angled hinge see angled hinge programme see angled hinge programme

3.19
MODUL accessories
Chipboard screws System screws Centre bit

Ø7 Ø8

X
X

Ø3.5 Ø6

nickel plated nickel plated - Hardened

- ø 2.7 mm, length 70 mm
Length (X) Part no. - To pre-drill for chipboard screws
10 mm 661.1000.HG ø 3.5 mm
11.5 mm 661.1150.HG - Drilling depth up to 8 mm
Length (X) Part no. 13 mm 661.1300.HG Part no.
15 mm 609.1500 14.5 mm 661.1450.HG Centre bit M01.ZZ03
17 mm 609.1700 20 mm 661.2000.HG drill bit M01.ZZB3

Stick-on door buffer 8 mm ø door buffer

1.5

Ø8

min.10
8

For noise reduction For noise reduction

Gap 2 mm
Two-part

Part no. Part no.

Nylon natural 993.710 Nylon 993.706

Pozi screwdriver Slotted screwdriver

- Cross-slotted, size 2 - Slotted, size 1.0 x 5.5 mm

- Blade length 100 mm - Blade length 125 mm
- Overall length 200 mm - Overall length 225 mm
- Orange handle with Blum logo - Orange handle with Blum logo

Part no. Part no.

Nylon / steel 303.756.1 Nylon / steel 314.928.1

3.20
Assembly, removal and adjustment
MODUL - assembly MODUL removal

Height adjustment Side Adjustment Depth adjustment

3.21