DC/DC Converter TME Series, 1 Watt

• Unregulated outputs
• I/O isolation voltage 1'000VDC
• Efficiency up to 80%
• Operating temperature range –40 °C to
+85 °C
• 3-year product warranty The TME series is a range of sub-miniature, isolated DC/DC-converters in a
SIP-package, which requires only 0.7 cm2 of board space. They provide a cost
effective solution to generate supplementary, isolated voltages. Full SMD-de-
sign and a 100% production test of parameters ensure a high reliability of this
product.

Models
Order Code Input Voltage Output Voltage Output Current Efficiency
Range nom. max. typ.
TME 0303S 2.97 - 3.63 VDC 3.3 VDC 260 mA 74 %
TME 0305S (3.3 VDC nom.) 5 VDC 200 mA 77 %
TME 0503S 3.3 VDC 260 mA 72 %
TME 0505S 5 VDC 200 mA 69 %
4.5 - 5.5 VDC
TME 0509S 9 VDC 110 mA 76 %
(5 VDC nom.)
TME 0512S 12 VDC 84 mA 77 %
TME 0515S 15 VDC 67 mA 78 %
TME 1205S 5 VDC 200 mA 71 %
TME 1209S 10.8 - 13.2 VDC 9 VDC 110 mA 77 %
TME 1212S (12 VDC nom.) 12 VDC 84 mA 79 %
TME 1215S 15 VDC 67 mA 80 %
TME 2405S 5 VDC 200 mA 70 %
TME 2409S 21.6 - 26.4 VDC 9 VDC 110 mA 76 %
TME 2412S (24 VDC nom.) 12 VDC 84 mA 79 %
TME 2415S 15 VDC 67 mA 79 %

www.tracopower.com September 9, 2022 Page 1 / 4

 TME Series, 1 Watt

Input Specifications
Input Current - At no load 3.3 Vin models: 35 mA typ.
5 Vin models: 30 mA typ.
12 Vin models: 13 mA typ.
24 Vin models: 7 mA typ.
- At full load 3.3 Vin models: 351 mA typ. (3.3 Vout model)
394 mA typ. (5 Vout model)
5 Vin models: 238 mA typ. (3.3 Vout model)
290 mA typ. (5 Vout model)
260 mA typ. (9 Vout model)
262 mA typ. (12 Vout model)
258 mA typ. (15 Vout model)
12 Vin models: 117 mA typ. (5 Vout model)
107 mA typ. (9 Vout model)
106 mA typ. (12 Vout model)
105 mA typ. (15 Vout model)
24 Vin models: 60 mA typ. (5 Vout model)
54 mA typ. (9 Vout model)
53 mA typ. (12 Vout model)
53 mA typ. (15 Vout model)
Surge Voltage 3.3 Vin models: 6 VDC max. (1 s max.)
5 Vin models: 9 VDC max. (1 s max.)
12 Vin models: 18 VDC max. (1 s max.)
24 Vin models: 30 VDC max. (1 s max.)
Recommended Input Fuse 3.3 Vin models: 750 mA (slow blow)
5 Vin models: 750 mA (slow blow)
12 Vin models: 750 mA (slow blow)
24 Vin models: 750 mA (slow blow)
(The need of an external fuse has to be assessed
in the final application.)
Input Filter Internal Capacitor

Output Specifications
Voltage Set Accuracy ±3% max.
Regulation - Input Variation (1% Vin step) 1.5% max.
- Load Variation See application note: www.tracopower.com/overview/tme
Ripple and Noise - 20 MHz Bandwidth 100 mVp-p typ.
150 mVp-p max.
Capacitive Load 33 µF max.
Minimum Load 2.5 % of Iout max.
(Operation at lower load will not damage the
converter, but it may not meet all specifications)
Temperature Coefficient ±0.02 %/K max.
Start-up Time 2.9 ms max.
Short Circuit Protection Limited 0.5 s max., Automatic recovery

General Specifications
Relative Humidity 95% max. (non condensing)
Temperature Ranges - Operating Temperature –40°C to +85°C
- Case Temperature +105°C max.
- Storage Temperature –50°C to +125°C
Power Derating - High Temperature 3.33 %/K above 70°C (5 Vout models)
4 %/K above 75°C (other models)
Cooling System Natural convection (20 LFM)

All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.

www.tracopower.com September 9, 2022 Page 2 / 4

 TME Series, 1 Watt

Switching Frequency 50 - 110 kHz (PFM)

90 kHz typ. (PFM)
Insulation System Functional Insulation
Isolation Test Voltage - Input to Output, 60 s 1'000 VDC
- Input to Output, 1 s 1'200 VDC
Isolation Resistance - Input to Output, 500 VDC 1'000 MΩ min.
Isolation Capacitance - Input to Output, 100 kHz, 1 V 60 pF typ.
100 pF max.
Reliability - Calculated MTBF 2'000'000 h (MIL-HDBK-217F, ground benign)
Washing Process Allowed (hermetical product)
See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf
Housing Material Non-conductive Plastic (UL 94 V-0 rated)
Base Material Non-conductive Plastic (UL 94 V-0 rated)
Potting Material Epoxy (UL 94 V-0 rated)
Pin Material Nickel-Iron (Alloy 42)
Pin Foundation Plating Nickel (1 µm min.)
Pin Surface Plating Tin (3 - 5 µm), matte
Housing Type Plastic Case
Mounting Type PCB Mount
Connection Type THD (Through-Hole Device)
Footprint Type SIP4
Soldering Profile Wave Soldering
260°C / 10 s max.
Weight 3.3 Vin models: 1.3 g
5 Vin models: 1.3 g
12 Vin models: 1.3 g
24 Vin models: 1.7 g
Thermal Impedance - Case to Ambient 78 K/W typ.
Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf
REACH SVHC list compliant
REACH Annex XVII compliant
- RoHS Declaration www.tracopower.com/info/rohs-declaration.pdf
Exemptions: No Exemptions

Supporting Documents
Overview Link (for additional Documents) www.tracopower.com/overview/tme

All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.

www.tracopower.com September 9, 2022 Page 3 / 4

 TME Series, 1 Watt

Outline Dimensions
11.5 (0.45)
Pinout
Pin Single
1 in (GND)
2 +Vin (Vcc)
3 out

10.2 (0.40)
4 +Vout
0.5 (0.02)

0.5
(0.13)
3.2

(0.02)

1.9
(0.07)

3X 2.54 (3X 0.100)

0.25 (0.010)

1.8 (0.07)

10.5 (0.41)

1 2 3 4
T

Bottom view

0.50
(0.020)

T: 6.1 (0.24) for 3.3Vin & 5Vin & 12Vin Models

T: 7.1 (0.28) for 24Vin Models

Dimensions in mm (inch)
Tolerance: x.x ±0.25 (x.xx ±0.01)
x.xx ±0.13 (x.xxx ±0.005)
Pin tolerance: ±0.05 (±0.002)

© Copyright 2022 Traco Electronic AG Specifications can be changed without notice.

Rev. September 9, 2022
www.tracopower.com Page 4 / 4