Scribd
Upload
187 views3 pages

Palfinger wt300

The WT 300 is a 30 meter working height aerial work platform tailored for client solutions. It features a 3 section boom system with 195 degree working range and automatic transport locking. The 1.6 by 0.8 by 1.1 meter work basket fits up to 320 kg and has proportional remote control, collision protection, and emergency controls. The carrier vehicle is a 7.49 ton class truck with 8.65 meter transport length and automatic stabilizers for up to 5 meter spread.

Uploaded by

Kenan Tiro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views3 pages

Palfinger wt300

The WT 300 is a 30 meter working height aerial work platform tailored for client solutions. It features a 3 section boom system with 195 degree working range and automatic transport locking. The 1.6 by 0.8 by 1.1 meter work basket fits up to 320 kg and has proportional remote control, collision protection, and emergency controls. The carrier vehicle is a 7.49 ton class truck with 8.65 meter transport length and automatic stabilizers for up to 5 meter spread.

Uploaded by

Kenan Tiro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

WT 300

The best in its class


Tailored client solutions

WT 300 Working range

ad
et lo
Bask

ad
Ouriggers left side in

et lo
100 kg

kg
Bask
Basket load

100
320 kg

kg
Basket load

320
320 kg
Basket load
100 kg
Basket load

Technical Data

Specifications of basic model Boom system


Max. working height 30 m Number of extensions 3
Max. basket floor height 28 m Self centering system standard
Max. horizontal outreach / All power guides and hydraulic and
19.50 m / 100 kg mechnanical equipment internally routed and standard
with workman basket
optimally protected against damage
Hydraulic jib boom, working range 195°
Automatic transport locking
Workman basket standard
device for jib boom
Dimensions
1.60 x 0.80 x 1.10 m Automatic return
of the standard workman basket (B x L x H)
of main boom to transport position standard
Slewing range of basket 2 x 80°
"Home Function"
Max. permissible load 320 kg
Motor Engine Start/Stop in the workman basket standard
Synthetic cover on control panel standard
230 V CEE outlet in the workman basket standard Slewing system
Anchor points to secure safety belt standard Slewing
Electronical controlled proportional standard
standard within mirror width
remote control Slewing range 540°
Graphic display standard
Collision protection for basket
standard
and jib boom
24 V socket in the workman basket standard
Basket interchange system standard
Overload control in the workman basket standard
E 09/08, K 09/08, D 04/09
Comprehensive service

KP-WT300M1+E
Stabilizers Carrier vehicle and installation
partial variable, GVW class 7.49 t
Function of the stabilizers
H-type Length in transport position 8.65 m*
Min. stabilizer spread – Width in transport position 2.50 m*
2.50 m
all outriggers in Height in transport position 3.50 m*
Max. stabilizer spread – Angle of slope approx. 9° *
5m
both sides horizontally extended Hydraulic oil tank with return line filter standard
Stabilizer control from the workman basket standard *) depending on carrier vehicle
Max. permissbile inclination 2° standard
4 Safety plates standard
Half automatic stabilizing standard Manual and emergency controls
Permanent ground pressure control standard Integrated in the body –
standard
well-protected and lockable
Emergency lowering system in the basket standard
Back-up/Emergency control
standard
at the base
Protection for cabin of chassis standard

The access platforms reproduced here are partially equipped to order and may not always correspond to standard models.
Specifications non-binding. Subject to technical modifications. Errors, including those in translation, excepted.

www.palfinger.com

You might also like