GOVERNMENT TOOM ROOM

AND TRAINING
TRA NING CENTRE

CAD LAB MANUAL

PREPARED BY:
ABHILASH V (BE, M-TECH)
TECH)

LECTURER
GTTC-KOLAR
GTTC
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

GOVT.TOOL ROOM & TRAINING CENTRE

CENTRE,
KOLAR

DIPLOMA IN TOOL AND DIE MAKING

COMPUTER AIDED DESIGN

LAB MANUAL

PREPARED BY :
ABHILASH.V (BE, M-TECH
TECH)

LECTURER
GTTC-KOLAR

SUBJECT:CAD LAB MANUAL

Page 1 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

STUDENT NAME: …………………

…………………..………………
………………

BRANCH: …………………………
………………………………………..
……………..……

BATCH: …………………………………………...…..

COLLEGE NAME
NAME: ..…..……………………….……
…..……………………….……

ADDRESS: ……………………………………………

………………………………….…
………………………………….………..

PHONE NUMBER: …………………………………

E-MAIL
MAIL ID: ……………………………………..

SUBJECT:CAD LAB MANUAL

Page 2 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

INDEX
CONTENTS PAGE NO.

1. THEORY OF SOFTWARES 5
 LIST OF 3D MODELING SOFTWARE
 GENERAL SOFTWARE USED TO MAKE 3D MODELING
2. 2D DRAWINGS 7
3. 3D PRACTICE MODELS-1 15
4. 3D PRACTICE MODELS-2 36
5. 3D DRAFTING MODELS 41
6. ASSEMBLY 67
 SCREW JACK
 PROTECTED FLANGE COUPLING
 FLANGE COUPLING
 UNIVERSAL COUPLING
 KNUCKLE JOINT
 SOCKET AND SPIGOT COTTER JOINT
 PLUMMER BLOCK
 TAIL STOCK
 LATHE SLIDE REST
 MACHINE VICE
 SWIVEL BEARING
 MACHINE SWIVEL VICE
 TOOL HEAD OF SHAPING MACHINE
 PIPE VICE
7. SOME OF THE SOFTWARES GENERAL QUESTIONS WITH ANSWERS 99
 CATIA
 PRO/ENGINEER or CREO
 SOLIDWORKS
 UNIGRAPHICS(NX)
8. REFERENCE 109

SUBJECT:CAD LAB MANUAL

Page 3 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

PREFACE
 This manual contains of 2D CAD Exercises, 3D CAD Exercises, and Assembly CAD
exercises.
 Each exercise can be designed on any CAD software such as Siemens NX, Solid Works,
PTC Cero Parametric, PRO/Engineer, AutoCAD, CATIA, Solid Edge, Autodesk Inventor
and other.
 These exercises are designed to help you test out your basic CAD skills.
 Each exercise can be assigned separately.
 All dimensions are in Millimetre ((mm).

DISCLAIMER
 The exercises given in this manual to enable you to practice what you learn. The practice
examples are range from easy to difficult or expert level.
 This manual is a practice book. Use this practice exercises to improve knowledge and skills
in any other CAD software.
 No part of this publication may be reproduced, stored in a retrieval system or transmitted in
any form or by any means electronic, mechanical, photocopying, recording or sold or in the
part of any form.
 All registered trademarks and non registered trademarks appearing in this guide book are the
property of their respective owners
owners.

SUBJECT:CAD LAB MANUAL

Page 4 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

THEORY OF SOFTWARES:
SOFTWARES:-
1.1 LIST OF 3D MODELING SOFTWARES:
SOFTWARES:-
The Following is a list of notable 3D modeling software,, computer programs used for
developing a mathematical representation of any three
three-dimensional
dimensional surface of objects, also
called 3D modeling.

NAME OF
SL. NAME OF THE SL.
DEVELOPERS THE DEVELOPERS
NO. SOFTWARE NO.
SOFTWARE
1 3D coat Pilgway 26 BricsCAD Bricsys nv
Army Research
2 3D Slash Sylvain Huet 27 BRL-CAD
Laboratory
3 3DVIA Shape 3DVIA community 28 Bryce Daz 3D
4 AC3D Inivis 29 CATIA Dassault systems
5 Adobe Dimension Adobe system 30 Carrara Daz 3D
6 Alibre Design Alibre, LLC 31 Cheetah3D Dr.Martin wengenmayer

7 Aladdin4D Discreet Fx LLC 32 Cinema 4D Maxon

8 Amapi Smith Micro 33 CityEngine Esri R&D center Zurich
CREO
9 Anim8or R. steven Glanville 34 PTC
PARAMETRIC
10 Animation:Master Harsh Inc. 35 Daz Studio Daz 3D
DesignSpark Ansys Inc., Rs,
11 ArchiCAD Graphisoft 36
Mechanical components
Peter Eastman & Electric Image
12 Art of Illusion 37 EIAS 3D
other Animation System
13 ArtMatic Commercial software 38 Exa Corporation Nasdaq. Exa
14 AutoCAD Autodesk 39 Flux Flux player
15 AutoQ3D Community AutoQ 3D Team 40 Form-Z Micintosh
16 AutoQ3D AutoQ 3D Team 41 FreeCAD FreeCAD standard file
17 Autodesk 3ds Max Autodesk 42 Geomodeller3D Intrepid Geophysics
18 Autodesk Inventor Autodesk 43 Hexagon Daz 3D
19 Autodesk Maya Autodesk 44 Houdini Side effects software Inc,
20 Autodesk Mudbox Autodesk 45 IRONCAD IronCAD LLC,
21 Autodesk Revit Autodesk 46 KeyCreator Kubotex 3D
22 Autodesk Softimage Autodesk 47 LightWave 3D Newtox, Inc
23 Autodesk Fusion 360 Autodesk 48 Makers Empire 3D Makers Empire 3D
24 Bcad Commercial software 49 MASSIVE Stephen Regelous
Telreaface Inc
25 Blender Blender Foundation 50 Metasequoia

SUBJECT:CAD LAB MANUAL

Page 5 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

51 MicroStation Bentely systems 71 Sculptris Pixologic

Grahm perret(AKA
52 MikuMikuDance Yu Higuchi 72 Seamless3d
thyme)
53 Milkshape 3D Mate ciragan 73 SelfCAD Aaron Breuer
The Foundry Vision
54 Modo 74 Shade 3D Shade 3D
Mongers
55 Nvil Nvil 75 SharkCAD Encore software, LLC
SIEMENS DIGITAL
56 NX(unigraphics) INDUSTRIES 76 Silo Never Center
SOFTWARE
57 Onshape PTC 77 SketchUp Timble Inc
SIEMENS DIGITAL
Open casade
58 Open CASCADE 78 Solid Edge INDUSTRIES
S.A.S.u
SOFTWARE
Marius Kintel, Clire
59 OpenSCAD wolf
79 solidThinking SolidThinking
60 Oculus Medium Oculus VR 80 SolidWorks Sessault Systemes
61 Poser Bondware 81 SpaceClaim Space claim corp.
Alias System
62 PowerAnimator corporation
82 Strata 3D Strata Design 3D CX
Yvan Dionne,
63 Promine 83 Sweet Home 3D eTeks
others
64 Pro/ENGINEER PTC 84 Swift 3D Electric Rain
65 Quake Army Knife QuArk Development 85 Tekla Structures Tekla
66 Realsoft 3D Realsoft oy 86 TrueSpace Caligari corporation
67 Remo 3D Remograph 87 Wings 3D Wings 3D
68 RFEM Dlubal software 88 ViaCAD Encore Software, LLC
Robert McNeil &
69 Rhinoceros 3D Friends
89 ZBrush Pixologic
70 ScanIP Synopsys 90 Zmodeler Oleg meashenko

1.2 GENERAL SOFTWARE USED TO MAKE 3D MODELING

MODELING:
1. SOLID EDGE
2. SOLID WORKS
3. UNIGRAPHICS(NX)
4. CREO PARAMETRIC OR PRO/ENGINEER
5. CATIA

SUBJECT:CAD LAB MANUAL

Page 6 of 110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

2D
DRAWINGS

SUBJECT:CAD LAB MANUAL

Page 7 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

1 2

3 4

6
5

SUBJECT:CAD LAB MANUAL

Page 8 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

7 8

9 10

11 12

SUBJECT:CAD LAB MANUAL

Page 9 of 110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

13 14

15 16

17 18

SUBJECT:CAD LAB MANUAL

Page 10 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

19 20

21 22

23 24

SUBJECT:CAD LAB MANUAL

Page 11 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

25 26

27 28

29 30

SUBJECT:CAD LAB MANUAL

Page 12 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

31 32

33 34

35 36

SUBJECT:CAD LAB MANUAL

Page 13 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

37 38

39 40

SUBJECT:CAD LAB MANUAL

Page 14 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

3D
D PRACTICE
MODELS
MODELS--1

SUBJECT:CAD LAB MANUAL

Page 15 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

01 02

03 04

05 06

SUBJECT:CAD LAB MANUAL

Page 16 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

07 08

09 10

11 12

SUBJECT:CAD LAB MANUAL

Page 17 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

13 14

15 16

17 18

SUBJECT:CAD LAB MANUAL

Page 18 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

19 20

21 22

23 24

SUBJECT:CAD LAB MANUAL

Page 19 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

25 26

27 28

29 30

SUBJECT:CAD LAB MANUAL

Page 20 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

31 32

33 34

35 36

SUBJECT:CAD LAB MANUAL

Page 21 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

37 38

39 40

41 42

SUBJECT:CAD LAB MANUAL

Page 22 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

43 44

45 46

47 48

SUBJECT:CAD LAB MANUAL

Page 23 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

49 50

51 52

53 54

SUBJECT:CAD LAB MANUAL

Page 24 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

55 56

57 58

59 60

SUBJECT:CAD LAB MANUAL

Page 25 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

61 62

63 64

65 66

SUBJECT:CAD LAB MANUAL

Page 26 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

67 68

69 70

71 72

SUBJECT:CAD LAB MANUAL

Page 27 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

73 74

75 76

77 78

SUBJECT:CAD LAB MANUAL

Page 28 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

79 80

81 82

83 84

SUBJECT:CAD LAB MANUAL

Page 29 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

85 86

87 88

89 90

SUBJECT:CAD LAB MANUAL

Page 30 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

91 92

93 94

95 96

SUBJECT:CAD LAB MANUAL

Page 31 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

97 98

99 100

101 102

SUBJECT:CAD LAB MANUAL

Page 32 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

103 104

105 106

107 108

SUBJECT:CAD LAB MANUAL

Page 33 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

109 110

111 112

113 114

SUBJECT:CAD LAB MANUAL

Page 34 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

115 116

117 118

119 120

SUBJECT:CAD LAB MANUAL

Page 35 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

3D PRACTICE
MODELS
MODELS--2

SUBJECT:CAD LAB MANUAL

Page 36 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

1 2

3 4

5 6

SUBJECT:CAD LAB MANUAL

Page 37 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

7
8

9 10

11 12

SUBJECT:CAD LAB MANUAL

Page 38 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

13 14

15 16

17 18

SUBJECT:CAD LAB MANUAL

Page 39 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

19 20

21 22

23 24

SUBJECT:CAD LAB MANUAL

Page 40 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

3D
DRAFTING
MODELS

SUBJECT:CAD LAB MANUAL

Page 41 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE-1

EXERCISE -2

SUBJECT:CAD LAB MANUAL

Page 42 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE-3

EXERCISE -4

SUBJECT:CAD LAB MANUAL

Page 43 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -5

EXERCISE -6

SUBJECT:CAD LAB MANUAL

Page 44 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -7

EXERCISE -8

SUBJECT:CAD LAB MANUAL

Page 45 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -9

EXERCISE -10

SUBJECT:CAD LAB MANUAL

Page 46 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -11

EXERCISE -12

SUBJECT:CAD LAB MANUAL

Page 47 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -13

EXERCISE -14

SUBJECT:CAD LAB MANUAL

Page 48 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -15

EXERCISE -16

SUBJECT:CAD LAB MANUAL

Page 49 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -17

EXERCISE -18

SUBJECT:CAD LAB MANUAL

Page 50 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -19

EXERCISE -20

SUBJECT:CAD LAB MANUAL

Page 51 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -21

EXERCISE -22

SUBJECT:CAD LAB MANUAL

Page 52 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -23

EXERCISE -24

SUBJECT:CAD LAB MANUAL

Page 53 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -25

EXERCISE -26

SUBJECT:CAD LAB MANUAL

Page 54 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -27

EXERCISE -28

SUBJECT:CAD LAB MANUAL

Page 55 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -29

EXERCISE -30

SUBJECT:CAD LAB MANUAL

Page 56 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -31

EXERCISE -32

SUBJECT:CAD LAB MANUAL

Page 57 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -33

EXERCISE -34

SUBJECT:CAD LAB MANUAL

Page 58 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -35

EXERCISE -36

SUBJECT:CAD LAB MANUAL

Page 59 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -37

EXERCISE -38

SUBJECT:CAD LAB MANUAL

Page 60 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -39

EXERCISE -40

SUBJECT:CAD LAB MANUAL

Page 61 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -41

EXERCISE -42

SUBJECT:CAD LAB MANUAL

Page 62 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -43

EXERCISE -44

SUBJECT:CAD LAB MANUAL

Page 63 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -45

EXERCISE -46

SUBJECT:CAD LAB MANUAL

Page 64 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -47

EXERCISE -48

SUBJECT:CAD LAB MANUAL

Page 65 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

EXERCISE -49

EXERCISE -50

SUBJECT:CAD LAB MANUAL

Page 66 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY

SUBJECT:CAD LAB MANUAL

Page 67 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

1. SCREW JACK:

SUBJECT:CAD LAB MANUAL

Page 68 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF SCREW JACK

SUBJECT:CAD LAB MANUAL

Page 69 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

2. PROTECTED FLANGE COUPLING:

SUBJECT:CAD LAB MANUAL

Page 70 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF PROTECTED FLANGE COUPLING

SUBJECT:CAD LAB MANUAL

Page 71 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

3. FLANGE COUPLING:

DIA 90

SUBJECT:CAD LAB MANUAL

Page 72 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF FLANG COUPLING

SUBJECT:CAD LAB MANUAL

Page 73 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

4. UNIVERSAL COUPLING:

SUBJECT:CAD LAB MANUAL

Page 74 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF UNIVERSAL COUPLING

SUBJECT:CAD LAB MANUAL
Page 75 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

5. KNUCKLE JOINT:

SUBJECT:CAD LAB MANUAL

Page 76 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF KNUCKLE JOINT

SUBJECT:CAD LAB MANUAL

Page 77 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

6. SOCKET AND SPIGOT C

COTTER JOINT:

SUBJECT:CAD LAB MANUAL

Page 78 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF SOCKET AND SPIGOT COTTER

COTT
JOINT

SUBJECT:CAD LAB MANUAL

Page 79 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

7. STRAP JOINT WITH GIB AND COTTER.

SUBJECT:CAD LAB MANUAL

Page 80 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF S
STRAP
TRAP JOINT WITH GIB AND
COTTER

SUBJECT:CAD LAB MANUAL

Page 81 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

8. PLUMMER BLOCK

SUBJECT:CAD LAB MANUAL

Page 82 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF PLUMMER BLOCK

SUBJECT:CAD LAB MANUAL

Page 83 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

9. TAILSTOCK:

SUBJECT:CAD LAB MANUAL

Page 84 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

10. LATHE SLIDE REST:

SUBJECT:CAD LAB MANUAL

Page 85 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF LATHE SLIDE REST

SUBJECT:CAD LAB MANUAL

Page 86 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

11. MACHINE VICE

SUBJECT:CAD LAB MANUAL

Page 87 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF MACHINE VICE

SUBJECT:CAD LAB MANUAL

Page 88 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

12. SWIVEL BEARING

SUBJECT:CAD LAB MANUAL

Page 89 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF SWIVEL BEARING

SUBJECT:CAD LAB MANUAL

Page 90 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

13. MACHINE SWIVEL VICE

SUBJECT:CAD LAB MANUAL

Page 91 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

SUBJECT:CAD LAB MANUAL

Page 92 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF MACHINE SWIVEL VICE

SUBJECT:CAD LAB MANUAL

Page 93 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

14. TOOL HEAD OF SHAPING MACHINE

SUBJECT:CAD LAB MANUAL

Page 94 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

SUBJECT:CAD LAB MANUAL

Page 95 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF TOOL HEAD OF SHAPING MACHINE

SUBJECT:CAD LAB MANUAL

Page 96 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

15. PIPE VICE

SUBJECT:CAD LAB MANUAL

Page 97 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

ASSEMBLY OF PIPE VICE

SUBJECT:CAD LAB MANUAL

Page 98 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

SOME OF THE SOFTWARES GENERAL QUESTIONS

WITH ANSWERS
1. CATIA:-
1. Expand CATIA?
Answer: computer aided three dimensional interactive applications.

2. What is the save extension of sketcher file?

Answer: CAT part

3. Does CATIA V5 work on Uni

Uni-graphics platform?
Answer: yes

4. Is it possible to increase the size of plane boundary representation & how?

Answer: yes, go for tools-options
options- infrastructure-part structure-display.

5. Is it possible to directly enter in to sketcher workbench?

Answer: no, it is not possible to enter in to sketcher workbench directly. We have to go for any
workbench &form there we can enter the sketcher workbench.
6. Which is the tool used to exit from sketcher workbench to part design workbench?
Answer: exit sketcher.

7. What is use of construction elements?

Answer: construction elements assist in sketching the required profile in sketcher.

8. What are the default units of limit (length, Mass and time) ?
Answer: mm, kg, second.

9. What is show/hide option?

Answer: show mode enable us to see all the components presently opened and in hide mode we
can hide the desired elements from the view for time being.
10. That is the use of cut part by sketch plane?
Answer: this task shows how to make some edges VISIBLE.. in other words, we are going
to simplify the sketch plane by hiding the portion of the material that is not needed
for sketching.
11. How do you measure arc length?
Answer: we can measure arc length by using m measure
easure item command. Sometimes we need to
customize the option for arc length if it is not checked earlier using customization in
measure item command.

SUBJECT:CAD LAB MANUAL

Page 99 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

12. What is the meaning of true dimension?

Answer: true dimension is the dimension desired after the mach
machining.
ining. in other words, this is the
value that should be attained after the machining.

13. What do ‘you mean by iso iso-constraints?

Answer: if all of the degrees of freedom of geometry have been takes up by a consistent
combination of dimensions & fixed geometry
geometry,.
,. that geometry is said to be iso-constrained.
iso
Geometry that still has some degrees of freedom is said to be under constrained.

14. What is the file extension of a part file?

Answer: file extension of part file is dot catpart (.catpart)

15. What is the meaning of mean dimension?

Answer: mean dimension is the dimension that should be mean of all the dimensions, which are
tolerance.
16. What is kernel?
Answer: the kernel is the basic indispensable part of an operating system that allocates resources
such as low- level
vel hardware interfaces & security.

17. What do catia p1, catia p2 and catia p3 mean?

Answer: p1, p2 and p3 will indicate the different types of platforms of catia. Higher the number
sophisticated will be the software.

18. Can we select non-planar

planar surface as sketch plane?
Answer: no, we cannot select a non
non-planar surface as sketch.

19. What is the use of isolate in sketcher workbench?

Answer: isolated is used when 3d geometry is projected on to a sketch in order to be modified
and used as part of the sketch’s pr
profile.

20. How do we change, sketch’s reference plane?

Answer: right click on the sketch whose reference plane is to be changed and select the change
reference plane and then select new reference.

21. Can we redefine the sketches?

Answer: yes.

22. What is use of sketch analysis?

Answer: to check whether the sketch is fully closed or not so that the sketch can be used or not
so that the sketch can be used for further operations in part design.

23. Where do we use axis?

Answer: axis is used in creating shaft (revolved
(revolved) feature.

24. What is the alternate option for intersect Boolean option?

Answer: solid combine is alternative option for intersection Boolean operation.

SUBJECT:CAD LAB MANUAL

Page 100 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

2. Pro/ENGINEER
NGINEER or CREO
CREO:-
1. What are the file extensions given to sketches, parts, assemblies, and drawings?
Answer: Sketches - .sec, Parts-- .prt, Assemblies- .asm, Drawings- .drw

2. How should you create a new part or assembly? Why?

Answer: You should always create a new part or assembly using the copy from option in the new
dialog box and copy a start part. This ensures the proper layer setup, saved views, datum
planes, parameters, etc.

3. What is the use of config.pro file?

Answer: The config.pro
.pro file contains configuration options which control the behavior of
Pro/ENGINEER. This file also contains user macros which are called map keys.

4. What is the meaning of "store back"?

Answer: 'Store back' refers to the behavior in which an object is sto
stored
red back to the directory from
where it was opened not necessarily the current working directory.

5. What is the difference between file -> erase and file -> delete?
Answer: File erase removes the object from the ram of the computer and file delete removes the
object from the disk or hard drive of the computer.

6. What is the difference between file -> save and file -> backup?
Answer: File save stores the object in the director
directory
y where it was opened from and file backup
copies the object to the specified directory using the same name.

7. After performing a file, save as, what is the current object?

Answer: After performing a file saves as command the current object is not a new obj
object it is the
old object.

8. What is the difference between one side and both sides in extrusion?
Answer: One-side
side extrudes only one specified direction from the sketching plane. Both sides
extrude both sides of the sketching planes.

9. How do you change dimensions of a feature?

Answer: Modify > pick the feature > pick the dimension > enter the new value > select
regenerate.

10. What is the model tree?

Answer: The model tree is a graphical representation of the features and/or components in the
model.

SUBJECT:CAD LAB MANUAL

Page 101 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

11. What is datum planes created ‘on the fly’?

Answer: The datum plane created on the fly means it was created when you were in the middle of
creating something else and it goes away after the thing you really wanted was created.
These are created using the 'make ddatum' command.

12. List three uses of datum axes?

Answer: Three uses of datum axes are as follow - Dimension and alignment references,
centerlines on drawings, geometric tolerance, and coaxial hole.

13. List two uses of a datum coordinate system?

Answer: Datum coordinate system is used while exporting to iges and stl.

14. Name a feature that can both add and remove material?
Answer: Rounds and chamfers are the features which can both add or remove the material.

15. When do feature relation evaluate?

Answer: When the feature regenerates.

16. What is a constraint relation in pro/engineer?

Answer: A constraint relation is used to put limits on parameters (usually dimensions) based
design intent and/or manufacturing limitations.

17. Why should you comment relations?

Answer: You should comment relations so that other users can understand what you are trying
to accomplish with the relations.

18. Can you add motion to a part in pro/engineer?

Answer: Yes.

19. How do you add a model parameter in a drawing note?

Answer: Use ampersand and then the parameter name (&material).

20. Name the four types of tolerance formats available in pro/engineer?

Answer: Nominal (no tolerance shown), plus/minus, plus/minus symmetric, limits.

21. Which of the tolerance formats should you not use?

Answer: Plus/minus (because manufacturing people want the model at the mean size not the
nominal size).

22. Can the units of a part be changed without changing the size of the part?
Answer: Yes.

SUBJECT:CAD LAB MANUAL

Page 102 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

3. SOLID WORKS:
WORKS:-
1. What is solid works?
Answer: Solid Works is a computer aided design tool used for the design, simulation of
mechanical products that runs on Microsoft Windows. Its application in complete
product development cycle starting from concept design to Detailed design, Structural &
thermal analysis, motion studies & engineering drawings and Also CAM.

2. What do you understand by a template in solid works?

Answer: Templates are used to save default setting.

3. What are configurations in solid works?

Answer: Configurations allow you to create mult
multiple
iple variations of a part/assembly model within
a single file. They provide a convenient way to develop and manage families of models
with different dimensions, components, or other parameters.
Go to configuration Manager --> Right click part/assembly name -> > click add configuration ->
write down configuration name and description -> ok

4. Explain how you can insert a reference image in solid works?

Answer: To add a reference image in Solid Works follow these steps:
 On the Any plane open a new sketch. (Front/Right/Top).
 Now to insert an image, go to -> Tools -> Sketch Picture.
 Choose the image you want to insert and tap on “Open”.

5. How to make a new part / drawing / assembly template in solid works?

Answer: Make all the required changes in part / drawin
drawingg / assembly template and then save it as
template.

6. What is convert entities and where it is used?

Answer: Convert entities are used in solid works to draw sketch with reference to any feature of
a part.
Open sketch->
> click model edge, loop, and surface -> click convert entities.

7. What is speed pack in solid works assembly?

Answer: Speed Pack is used to create a simplified configuration of an assembly without losing
references. If you work with very large and complex assemblies, using a Speed Pak
configuration can significantly improve performance while working in the assembly and
its drawing.

8. What do you understand by equations in solid works part and assembly module?
Answer: Equations are added in solid works to add a relationship in any two dimensions using
global variables and mathematical functions.

SUBJECT:CAD LAB MANUAL

Page 103 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

9. What are the commonly used tools in solid works surface?

Answer:
 Extrude
 Revolve
 Sweep
 Loft
 Boundary Surface
 Offset
 Fill Surface
 Extend
 Trim
 Un-trim
 Knit
 Planer

10. What are display states in solid works?

Answer: A part's display settings are stored in display states in the part/Assembly. Display states
control the appearance, display mode, hide/show, and transparency of bodies, features,
faces, and parts.

11. How to make multi-body

body part in solid works?
Answer: To make any part multi
multi-body
body part merges option need to be merged.

12. What is external reference in solid works?

Answer: External reference is used in solid works assembly to make one part with reference to
another in an assembly.

13. What is pack & go in solid works?

Answer: Pack & Go tool is used in solid works to copy comple
complete
te assembly with all associated
parts, drawings and references.

14. What is whole wizard and how it is used?

Answer: Whole wizard is a tool inside solid works that allows to quickly creating standard &
customized holes within a part or assembly without using multiple features.

15. How do you create an ee-drawing?

Answer: Click Publish an e-Drawing
Drawing in the Solid Works application.

SUBJECT:CAD LAB MANUAL

Page 104 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

16. What is suppressing tool in solid works?

Answer: Suppressed part in solid works is just like a deleted part in an assembly that is ea
easy to
undo. When a part is suppressed all dependencies from that part is also suppressed
(features, mass, BOM).

17. What are the types of pattern in solid works assembly?

Answer:
 Linear component pattern
 Circular component pattern
 Pattern driven component pattern
 Sketch driven component pattern
 Curve driven component pattern
 Chain component pattern
 Mirror

18. How we can copy complete assembly to one folder along with drawings, all
reference parts, and colors?
Answer: Pack & Go tool is used in solid works to co copy
py complete assembly with all associated
parts, drawings and references
Open part/assembly ->
> Go to file -> Click pack & Go -> > select the files to be copied in pack &
go folder ->
> Add prefix or suffix -> select folder -> save.

19. What is the window that show

showss you a thumbnail view of the whole e-drawing?
e
Answer: Overview window.

20. What action does the home command perform?

Answer: Returns to the default view.

21. Which command performs a non

non-stop replay of e-drawing
drawing animation?
Answer: Continuous Play.

22. True or false — e-drawings

drawings only display part files, but not assemblies or drawings.
Answer: False.

23. True or false — you can hide assembly components or drawing views.
Answer: True.

24. What visual aid helps you identify model orientation in a drawing?
Answer: 3d pointer.

25. Holding shift and pressing an arrow key rotate a view 90

90-degree
degree at a time. How
would you rotate a view 1515-degree at a time?
Answer: Press an arrow key without holding Shift.

SUBJECT:CAD LAB MANUAL

Page 105 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

4. UNIGRAPHICS (NX)
1. What do you mean by Gateway Application in UG (NX)?
Answer: Uni-graphics
graphics functions are divided into applications of common capabilities, such as
Modeling, NX Sheet Metal, Shape Studio, Drafting, Manufacturing, Assemblies etc.

2. What is Master Model Concept?

Answer: The same model is used from conceptual design to the Drafting, Assembly, Analysis and
Manufacturing. The idea of a virtual assembly taken to its logical conclusion leads to
Master Model paradigm. If you change anything in Master Model, it will reflect in all other
applications.

3. How to convert a file created in mm to inches (conversion of units) in UG NX?

Answer: We can convert a file created in mm to inches by using UG command prompt.
Ug_convert_part (space) -in (space) 1234.prt
Note: Save your file where command prompt showing location; Example:
Example:-
C:/users/username
4. What is Promote body?
Answer: When you have an assembly that is work part, this option lets you promote a body from
a loaded assembly component to the level of the assembly. The promote body remains
associative to the original body, which is referred to as the base body.

5. What is Extract Body?

Answer: This option create an associate copy of an entire body in part file. Features can then be
added to Extract Body feature without appearing on the original body. You can also decide
whether you want he Extract Body feature to update when tthe
he original body is changed.

6. What are Part families?

Answer: This option let you create a family of parts by creating a template part. You can use the
Unigraphics spread sheet (via the Create button on the Part Families dialog) to create a
table describingg the various part family members.

7. What is direct modeling or synchronous modeling?

Answer: Direct modeling techniques represents extended capabilities for some of the more basic
Unigraphics functions. Among these are face oriented operations, constraint based methods,
blend regeneration and independence of feature history. You can use Direct mo modeling
functions on models that have been imported from other CAD systems and are non non-
parametric.

SUBJECT:CAD LAB MANUAL

Page 106 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

8. What do you mean by Expressions?

Answer: Expressions are mathematical or conditional equations used to control the parameters of
a model. With expressions, you can easily apply major edits to a model. By changing the
expressions that control a specific parameter, you can re
re-size
size or re-position
re features of a
solid model.

Three types of Expressions are there

 Arithmetic Expressions
 Conditional Expressions
 Geometric Expressions
9. What is the limit for Undo?
Answer: We can use Undo for 222 times or until up to last time saved.

10. How many colours in are there in UG?

Answer: There are 216 colors in UG.

11. How many Layers are there in UG NX?

Answer: There are 256 Layers in UG.

12. What do you meant by Weight Management?

Answer: The Weight management option allow us to calculate and control the weight and other
mass properties of parts, components and assemblies based on the solid bodies they contain.

13. What do you mean by Knowledge Fusion?

Answer: The Uni-graphics

graphics NX Knowledge Fusion application provides a graphical user interface
that allows us apply engin
engineering
eering knowledge driven rules and design intent to geometric
models and assemblies in Unigraphics.

14. What are the different types of modeling?

Answer: There are four types of modeling.
 Solid Modeling
 Feature Based Modeling
 Free Form Modeling
 Sheet Metal Feature Modeling

15. What is Para solid?

Answer: Para solid is form of translator which is used to open the higher version Unigraphics part
files to in lower version of Unigraphics. For example we can open the NX10.0 version part
files in NX7.5.

SUBJECT:CAD LAB MANUAL

Page 107 of
110
DIPLOMA IN TOOL AND DIE MAKING
 GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

16. What is Datum Plane? Why it is used?

Answer: Datum Plane is reference feature that can be used to as construction tool in building the
model.

17. What is Datum Axis?

Answer: Datum Axis, which is a reference object you can use to create other objects, such as
Datum planes, revolved features, and extruded bodies. Datum Axis can be either relative or
fixed.

18. What is constraint?

Answer: Constraints limit structural movement and rrepresent
epresent mounts and supports. Constraints
can be applied to faces or edges. (Restricting the degree of freedom)

19. How many types of constraints are there?

Answer: There are two types of constraints.
 Geometrical constraints
 Dimension constraints

20. What is the expansion of IGES, STEP, and DXF?

Answer:
 IGES – Initial Graphic Exchanges Specifications.
 STEP – Standard For The Exchange of Product Model Data
 DXF – Data Exchange Format

21. What is the difference between Rotational WCS & Dynamic WCS?
Answer: In Rotational WCS we can give the angle by which the WCS need to rotate by typing it
in the space provided, while in Dynamic WCS we can dynamically rotate the WCS and
give the angle.

22. How many types of geometrical constrains are there in Unigraphics NX?
Answer: There are 22 types of Geometrical constrains in Unigraphics NX.

23. In which command do you find strings, apex string, and spline string?
Answer: We find these options in section command of free form feature.

24. Where do you find bounded plane command?

Answer: We find the Bounded plane command in Insert –> Surface –>
> Bounded Plane.

SUBJECT:CAD LAB MANUAL

Page 108 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

REFERENCE

1.
2. https://studylib.net/doc/25742825/cad
https://studylib.net/doc/25742825/cad-2d-exercises--30
3. https://www.thesourcecad.com/autocad
https://www.thesourcecad.com/autocad-practice-drawings-ebook/
ebook/
4. https://studycadcam.blogspot.com/2020/03/3d
https://studycadcam.blogspot.com/2020/03/3d-cad-exercises-19.html
19.html
5. www.solidworks.com
.com
6. www.3ds.com
7. www.siemens.com
8. Engineering drawing
drawing-III reference book of GTTC.

SUBJECT:CAD LAB MANUAL

Page 109 of
110
DIPLOMA IN TOOL AND DIE MAKING
GOVT TOOL ROOM AND TRAINING CENTRE
CENTRE-KOLAR ABHILASH V

THANK YOU

SUBJECT:CAD LAB MANUAL

Page 110 of
110
DIPLOMA IN TOOL AND DIE MAKING