0% found this document useful (0 votes)
14 views

DK Infusetek Co.,Ltd: Split Type Syringe Pump

1. DK Infusetek Co., Ltd produces a split-type syringe pump with a 4.3-inch touchscreen that can control and display parameters for up to 8 pump units simultaneously. 2. Each pump unit works independently and can infuse or withdraw different volumes at the same or different times. Intelligent calibration ensures accuracy while online adjustments allow volume changes. 3. The interface in real-time monitors flow rates and parameters with dynamic displays and alarms for each unit. Technical specifications include pump speeds from 1um/min to 132mm/min and various control, storage, and interface features.

Uploaded by

easypump2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views

DK Infusetek Co.,Ltd: Split Type Syringe Pump

1. DK Infusetek Co., Ltd produces a split-type syringe pump with a 4.3-inch touchscreen that can control and display parameters for up to 8 pump units simultaneously. 2. Each pump unit works independently and can infuse or withdraw different volumes at the same or different times. Intelligent calibration ensures accuracy while online adjustments allow volume changes. 3. The interface in real-time monitors flow rates and parameters with dynamic displays and alarms for each unit. Technical specifications include pump speeds from 1um/min to 132mm/min and various control, storage, and interface features.

Uploaded by

easypump2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DK INFUSETEK CO.

,LTD

Split Type Syringe Pump


SPM

Introduction
4.3 inch touch screen control, compact design. Display 8 pump units workingparameters and working state in samescreen.Friendly interface,

easy operation.Split design,mainly for laboratory.

Features
1.Each unit working independently, can set one or some units freely.Each unit can infuse or withdraw different volume in same time or
different time.
2.Intelligent calibration, ensure infuse volume accuracy.Online micro adjusting function, convenient to adjust the volume of one units,
decrease volume error.
3.Real time monitor,animate display monitor result. Controller can receive traffic alarm of each unit.
4.Back distance setting, can exclude bubbles inside syringe, improve volume accuracy.
5.Fast forward and backward function used for loading syringe,washing and unlock traffic protection.

Interface Display
Real-time display flow rate Display area for setting parameter

Display area
for dynamic working Function
setting area
changeable
by touching

www.infusetek.com.cn TEL:400-630-8958
DK INFUSETEK CO.,LTD

Technical Specifications

Working mode(Five) Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion


Pump unit 1-8 optional
Syringe size 0.5μL-60mL

Syringe selection Available of the mainly manufacturer, type and syringe from, also can define syringe ID in same time
Linear speed range 1μm/min-132mm/min(Flow rate=Linear speed* syringe inner cut area)

Min. linear rate 1μm/min

Linear force ≥16Kgf


Max. stroke 90mm

Stoke resolution 0.078μm/μstep

Accuracy Stroke≥30% maximum stroke,Error≤ ±0.5%

Back distance 0.01-5mm


Working mode Independent working mode
Stored modes Can save 10 group working modes

Display Industrial grade 4.3”LCD color display


Control method Touch screen and Mechanical keypad
Power-off memory Display the previous data parameter after power on again
Output OC gate signal output,used to indicate running status and direction

External control signal Start/stop signal,active switch signal:(5-24V)


Communication interface RS232/RS485, Modbus protocol(RTU mode)
Controller Power supply DC5V/10W
Pump unit power supply DC24V/24W
Condition temperature 0-40℃
Relative humidity <80%
IP rate IP31

Controller dimension 160×150×95(mm)


Controller weight 1kg

Pump unit dimension 257×110×131(mm)

Pump unit weight 2.6kg

www.infusetek.com.cn TEL:400-630-8958
DK INFUSETEK CO.,LTD

Dimension Drawing (Unit:mm)

www.infusetek.com.cn TEL:400-630-8958

You might also like