Scribd
Upload
329 views

Network Synthesis Model Exit

The document discusses network analysis and synthesis concepts including: 1) A unit step voltage applied to an inductor results in a ramp function current. 2) A ramp current through a capacitor results in a voltage that varies directly with time. 3) For a voltage applied to an inductor with an initial current, the net current will be zero at the square root of 2 seconds. 4) Questions cover concepts like inductor and capacitor properties, network elements, time and frequency responses, and network analysis techniques.

Uploaded by

ERMIAS Amanuel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
329 views

Network Synthesis Model Exit

The document discusses network analysis and synthesis concepts including: 1) A unit step voltage applied to an inductor results in a ramp function current. 2) A ramp current through a capacitor results in a voltage that varies directly with time. 3) For a voltage applied to an inductor with an initial current, the net current will be zero at the square root of 2 seconds. 4) Questions cover concepts like inductor and capacitor properties, network elements, time and frequency responses, and network analysis techniques.

Uploaded by

ERMIAS Amanuel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Network analysis & synthesis

1. A unit step voltage is applied across an inductor. The current through the inductor will be

A. zero for all time


B. a step function
C. a ramp function
D. a delta (impulse) function
ANSWER: C

2. A ramp current flowing through an initially relaxed capacitor will result in a voltage across it
that

A. Varies inversely with time


B. remains constant
C. varies directly with time
D. varies as the square of time.
ANSWER: D
3. The voltage v(t) = t u (t) volts is connected across a 1 H inductor having an initial current of -1
A. The net current will be zero at time t equal to
A. 0
B. 1/√2 sec
C. √2 sec
D. 1 sec.
ANSWER: C
4. A voltage waveform is applied across 1H Inductor for t ≥ 0, with initial current through it
being zero. The current through the inductor for t ≥ 0 is given by
A. 12t
B. 24t
C. 12 t3
D. 4 t3
ANSWER: D
5. It is desired to have a constant direct current i (t) through the ideal inductor L. The nature of
the voltage source v (t) must
A. Constant voltage
B. Linearly increasing voltage
C. An ideal impulse
D. Exponentially increasing voltage.

ANSWER: C
6. For the current and voltage waveforms, identify the element & its value.

A. Inductor, 25
B. Capacitor, 25
C. Inductor, 2
D. Capacitor, 2
ANSWER: B

7. If Vs = 40t V for t > 0 and it (0) = 5A, what is the value of i(t) at t = 2sec.

A. 24A
B. 34A
C. 29A
D. 39A
ANSWER: C
8. Tie –set is a dual of
A. KVL
B. Cut set
C. Spanning sub graph
D. None
ANSWER: B
9. Inductor acts like for an ac signal in the steady state
A. Open
B. closed
C. Neither open nor closed
D. None
ANSWER: C
10. A unit step current is impressed across a parallel 3 , 2F circuit. Under steady state, the
capacitor voltage will be
A. 3V
B. 2V
C. 1V
D. 0
ANSWER: A
11. The steady state o/p voltage corresponding to the input voltage 3 + 4 sin 100t v is

A. 3 + 4 / 2 sin (100 t - / 4 )


B. 3 + 42 sin ( 100 t - /4 )
C. 3/2 + 4 / 2 sin ( 100 t + /4 )
D. 3 + 4 sin ( 100 t +/ 4) v
ANSWER: A
12. H (S) = (S+2) / (S2 + S + 4) x(t) = cos 2t ; y(t) = cos (2t + ), what is ?
A. 45°
B. 0°
C. -45°
D. -90°
ANSWER: C
13. The system function H(s) = s / (s2 + 2s + 100). The resonant frequency and the bandwidth in
rad/s are given, respectively, by
A. 10, 1
B. 10, 2
C. 100, 2
D. 100, 1
ANSWER: B
14. Super positions theorem is not applicable in the network when it is
A. Linear
B. Non- linear
C. Time- varying
D. Time invariant
ANSWER: C
15. A 2:1 step down impedance matching transformer is often used to connect an antenna to the
75input jack of a television. Assuming the transformer is located at the antenna and the cable
between the transformer and the TV can be modeled as a 50 mresistance, determine the
maximum power delivered to the TV assuming the antenna intercepts a 10mV signal at 125MHz.

A. 166nW
B. 0.083mW
C. 1.66W
D. 0.083W
ANSWER: D
16. The transient current in a loss free L-C circuit when excited from an ac source is a /an ……
sine wave
A. Over damped
B. Under damped
C. Un damped
D. Critically damped
ANSWER: C
17. A two terminal black box contains one of the RLC elements. The black box is connected to a
220 volts ac supply. The current through the source is I. When a capacitance of 0.1 F is inserted
in series between the source and the box, the current through the source is 2I. The element is
A. a resistance
B. an inductance
C. a capacitance of 0.5 F
D. not identifiable on the basis of the given data
ANSWER: B
18. In a circuit the voltage across an element is v(t) = 10 (t-0.01) e-100t V. The circuit is

A. Un damped
B. under damped
C. critically damped
D. Over damped
ANSWER: C
19. A series R-C circuit has a capacitor with an initial voltage of 11 V. A 15 V dc source is now
connected across the R-C circuit. The initial rate of change of capacitor voltage can be
A. 15 0.368 / RC
B. 150.632 / RC
C. 11/ RC
D. 4/ RC
ANSWER: D
20. An impulse current 2(t) A, with t in second, is made to flow through an initially relaxed 3F
capacitor. The capacitor voltage at T = 0+ is
A. 6V
B. 2V
C. 2/3 V
D. zero
ANSWER: C
21. The output voltage of circuit in fig for t>0 is

A. e-t/RC
B. -e-t/RC
C. 1-e-t/RC
D. e-t/RC-1
ANSWER: B
22. In the circuit shown, switch K is closed at t=0. The circuit was initially relaxed. Which one of
the following sources of v(t) will produce maximum current at t=0+?

A. Unit step
B. Unit impulse
C. Unit ramp
D. unit step plus unit ramp
ANSWER: B
23. The circuit is shown, find i(t) if the impulse voltage is applied to the circuit.

A. i(t) = 1/R[1-(1/RC) e-t/RC]u(t)


B. i(t) = 1/R[ e-t/RC]u(t)
C. i(t) = 1/R[(t)-(1/RC) e-t/RC]u(t)
D. None
ANSWER: C

24. As the poles of a network shift away from the axis, the response

A. Remain constant
B. becomes less oscillating
C. becomes more oscillating
D. none of these
ANSWER: B

25. The response of a network is decided by the location of

A. Its zeros
B. Its poles
C. both zeros & poles
D. neither zeros nor poles.
ANSWER: C

26. The pole-zero configuration of a network function is shown. The magnitude of the transfer
function will

A. Decrease with frequency


B. increase with frequency
C. Initially increase and then decreases with frequency
D. Be independent of frequency
ANSWER: D
27. Given I1 = 2V1 + V2 and I2 = V1 + V2 the Z-parameters are given by
A. 2,1,1,1
B. 1,-1,-1,2
C. 1,1,1,2
D. 2, -1,1,1
ANSWER: B
28. The short – circuit admittance matrix of a two-port network is as shown, the two-port
network is

A. Non reciprocal & passive


B. Non-reciprocal & active
C. Reciprocal & passive
D. reciprocal & active
ANSWER: A
29. The two- port network shown in fig. described by the relationships V1 = kV2 and I1 =
k12 its input impedance is

A. R
B. –R
C. kR
D. k2 R

ANSWER: B
30. The network in the box shown displays the following z parameters: Z 11= 50 ohms,
Z12 = -100 ohms, Z21 =500 ohms, and Z22 = 2.5 k ohms. Determine the circuit required for
ZL to insure maximum power transfer. Assume f = 60 Hz

A. 2.8k ohms. 26.5 F in series.


B. 2.6 k ohms, 26.5 F in series
C. 2.8 k ohms, 265 mH in series
D. 2.6 k ohms, 265 mH in series
ANSWER: C

31. The ABCD parameters of an ideal n:1 transformer shown in fig are [ n0 X0 ] . The value of X
will be

A. n
B. 1/n
C. n2
D. 1/n2
ANSWER: B

32. The necessary and sufficient condition for a rational function of T (s) to be driving point
impedance of an RC network is that all poles and zeros should be
A. Simple and lie on the negative axis in the s- plane
B. Complex and lie in the left half of the s- plane
C. Complex and lie in the right half of the s- plane
D. Simple and lie on the +ve real axis of the s-plane
ANSWER: A
33. In an impedance function, a pole at infinity to be realized by using

A. a capacitance in series
B. an inductance in series
C. an inductance in parallel with the driving point terminals
D. none
ANSWER: B

34. An impedance function whose real part varnishes at some real frequency is called

A. minimum impedance function


B. minimum reactance function
C. minimum susceptance function
D. minimum resistance function
ANSWER: D

35. The transfer function 1 / s

A. can be realized by an R-C network


B. can be realized by an R-L network
C. Can be realized by an R-L-C network
D. cannot be realized by an R-L-C network
ANSWER: D

36. Of the following driving point impedance, the one realized by an R-C network is
A. (s + 1) (s+3) / s (s+2)
B. s(s+2) / (s+1) (s+2)
C. (s+2) (s+3) / s(s+1)
D. s(s+1) / (s+2) (s+3)
ANSWER: A

You might also like