Samsung (UH5003-SEA) BN68-06750E-01ENG-0812
Samsung (UH5003-SEA) BN68-06750E-01ENG-0812
yy For better picture and audio quality, connect to a digital device using an HDMI yy PC / DVI AUDIO IN input is not supported.
Accessories cable.
LED TV
yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
yy The picture may not display normally (if at all) or the audio may not work if an yy Connecting through the HDMI cable may not be supported depending on the PC.
yy Remote Control & Batteries (AAA x 2) yy Warranty Card / Regulatory Guide (Not available in some locations) external device that uses an older version of HDMI mode is connected to the TV. yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does
If such a problem occurs, ask the manufacturer of the external device about the
user manual
display or a connection error may occur.
(Please read the safety instructions below before installing and using the product.)
BN68-06750E-01 - English -
Displays and selects the available video Scans for a channel manually and stores in the TV.
of the time. ■■ Standard: Selects the normal sound mode. ✎✎ For India Only.
A B C D Use these buttons according to the direction on 16:9: Sets the picture to 16:9 wide mode. ■■ Music: Emphasizes music over voices.
Turns the TV on and off.
sources.
screen. ✎✎ According to channel source, Manual Store may be supported. 4:3: Sets the picture to basic (4:3) mode.
E-MANUAL: Not available. SLEEP Sound Reset
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there is ■■ Movie: Provides the best sound for movies.
E-MANUAL
: Provides a way to capture the images and audio. Use these buttons in a specific feature. Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
SLEEP: Automatically shuts off the TV at a preset time. abnormal sound or no sound, reselect the sound standard required. size. ■■ Clear Voice: Emphasizes voices over other sounds. ■■ Reset All: Reset all sound settings to the factory defaults.
Press to directly access to channels. Channel List Option Menu ✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the Selecting the Sound Mode t
Set each channel using the Channel List menu options (Add / Delete).
left, right and centre of the screen may cause image retention (screen burn)
which are not covered by the warranty.
Equalizer When you set to Dual I-Dual II, the current sound mode is displayed on
Option menu items may differ depending on the channel status. (standard sound mode only) the screen.
Screen Fit: Displays the full image without any cut-off when
Alternately select Teletext ON, Double, Mix or OFF. Returns to the previous channel.
Set each channel using the Channel List menu options. Option menu HDMI(720p/1080i/1080p) signals are inputted.
items may differ depending on the channel status. ■■ Balance: Adjusts the balance between the right and left speaker. Audio Type Dual I-II Default
Cuts off the sound temporarily. ✎✎ NOTE ■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Mono Mono Automatic
■■ Add / Delete: Delete or add a channel to display the channels you want.
Adjusts the volume. For Southwest Asia xxDepending on the input source, the picture size options may vary. Adjusts the level of specific bandwidth frequencies. A2 Stereo Stereo Stereo ↔ Mono change
Changes channels.
✎✎ All deleted channels will be shown on the All Channels menu. xxThe available items may differ depending on the selected mode. Dual Dual I ↔ Dual II Dual I
■■ Reset: Resets the Equalizer to its default settings.
✎✎ A “ ” beside the channel indicates the channel has been deleted. xxSettings can be adjusted and stored for each external device connected to an Mono Mono Automatic
-9- - 10 - - 11 - - 12 -
The speakers are making an inappropriate yy Check the cable connections. Make sure a video cable is not connected to an audio input. You have intermittent loss of audio or video. yy Check the cable connections and reconnect them. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous
noise. yy For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. yy Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
No Picture, No Video
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
The TV will not turn on. yy Make sure the AC power cord is securely plugged in to the wall outlet and the TV. You see small particles when you look yy This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
yy Make sure the wall outlet is working. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
yy Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The There are recurrent picture/sound issues. yy Check and change the signal/source.
remote control does not work” below.
A reaction may occur between the rubber yy To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The TV turns off automatically. yy Ensure the Sleep Timer is set to Off in the Time menu. cushion pads on the base stand and the
yy If your PC is connected to the TV, check your PC power settings. top finish of some furniture.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV. Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
yy When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal. ✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
These pixels will have no impact on the performance of the product.
There is no picture/video. yy Check cable connections (remove and reconnect all cables connected to the TV and external devices).
yy Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
✎✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB. Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
- 13 - - 14- - 15 - - 16 -