Scribd
Upload
56 views

Manual ChuWi Flash

1. The document provides steps to flash the BIOS, Android, and Windows systems on a ChuWi Hi10 Pro tablet. 2. It involves using a USB disk formatted to FAT32, along with a USB hub and keyboard. The BIOS is flashed first by pressing F7 during startup. Then Android is flashed, which will format the Windows partition. Finally, Windows can be re-flashed alone without affecting Android. 3. Key steps include selecting the flashing mode and partitions using the keyboard, and waiting patiently for longer first startup times after flashing. Proper USB disks and following instructions carefully are emphasized.

Uploaded by

chema.gallegoaleman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
56 views

Manual ChuWi Flash

1. The document provides steps to flash the BIOS, Android, and Windows systems on a ChuWi Hi10 Pro tablet. 2. It involves using a USB disk formatted to FAT32, along with a USB hub and keyboard. The BIOS is flashed first by pressing F7 during startup. Then Android is flashed, which will format the Windows partition. Finally, Windows can be re-flashed alone without affecting Android. 3. Key steps include selecting the flashing mode and partitions using the keyboard, and waiting patiently for longer first startup times after flashing. Proper USB disks and following instructions carefully are emphasized.

Uploaded by

chema.gallegoaleman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

ChuWi Hi10 Pro dual system flash tutorial

•tools： 8G USB disk，micro USB-OTG cable 、HUB（3 interfaces or more)、 USB


interface keyboard，as below:

Flash steps ：

1.First flash bios，then flash Android，last flash Windows.（if it’s cause by the
system issues,you can pass the first step, no need to flash BIOS. ） 。

2.Flash Android will format the Windows memory,you can keep the Windows or
delete the Windows script,please backup the important data before you delete
Windows.

3.Flash the Windows,（flashing the Windows alone will not affect Android ）

Notice： Make sure the battery has more than 50% charge,or keep charging .

一、Flash BIOS（If it’s reinstall system, you can not flash bios ，flashing
the wrong bios may result in no display,Please be cautiou s.）

1.copy the bios file to USB Root directory，（format the USB to fat32, entitled
WINPE）

2.Connect the tablet micro-USB to Hub ，USB disk and USB keyboard plug into
HUB.

Press the power button to turn on (under the Off state) ，at the same time, press
F7 continuously to enter the flashing mode.
3.Via the keyboard”↑“ ↓” to select UEFI: San Disk , Partition 1press”Enter”to start
flash Bios，it will turn on automatically.
二、Flash Android

1.First install the Android flashing tool on your home computer.


2.Start flash(click the upper right corner tool Browse... find the downloaded
Android firmware file and select flash.json ,Configuration:the second blank without
gpt,keep partition，if you have deleted please select the first blank and flash the
windows again）

3.Select the firmware, under the off state keep pressing the volume”+” ”-” at the
same time,then press the power button to turn on.

After turn on the power button can be released, volume”+” ”-” not,until it
shows【DNX FASTBOOT MOOE.. 】connect the computer to flash.After flashing it
will turn on and enter the Android language interface automatically.
4.click Start to flash

三、Flash Windows

1.format the USB disk, as below:

【NTFS entitled WINPE】（it can’t be recognized if not entitled WINP ）


2.open win10 image file and copy the subfile to the root directory of the USB disk.
（start flashing after copy is complete）

3.Connect the tablet micro-USB to Hub ，USB disk and USB keyboard plug into
HUB.

Press the power button to turn on (under the Off state) ，at the same time, press
F7 continuously to enter the flashing mode.

4.Via the keyboard”↑“ ↓” to select UEFI: San Disk , Partition 1press”Enter”to start
flash Win，it will turn off after flashing.

1.

2.

The first time turn on the tablet will take a long time,please wait patiently to enter the language
interface , then select the language to enter the system.

Last：The programming will last about 5 to 10 minutes; the precise time is


dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0.
High-speed programming lasts about 5 minutes.

TIPS：

Flash machine is risky, please follow the flash tutorial.thank you!

You might also like