Scribd
Upload
30 views

Vector Part3 Methods-Tech Piece-Recut-Additive en

This document describes parameters for recutting pieces in a vector cutting program. It explains that recutting pieces has specific tabs that define input options. Parameters include piece group mode (cutting one by one or as a group), multiple positionings (position then cut each piece or position all then cut all), and final control mode (none, global window, piece contour). The document provides details on these recutting pieces activity specific settings.

Uploaded by

juansalinast1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Vector Part3 Methods-Tech Piece-Recut-Additive en

This document describes parameters for recutting pieces in a vector cutting program. It explains that recutting pieces has specific tabs that define input options. Parameters include piece group mode (cutting one by one or as a group), multiple positionings (position then cut each piece or position all then cut all), and final control mode (none, global window, piece contour). The document provides details on these recutting pieces activity specific settings.

Uploaded by

juansalinast1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Vector

Methods Technician - Recutting pieces additive

JULY 2012PREPARING SETS OF PARAMETERS FOR


RECUTTING PIECES
Select the user "Alex".

Select the Preparation session .

1. ACCESSING PARAMETERS

The Activities tab is displayed by default when the session is launched.

Select Recutting Pieces in the activity types drop-down menu.

Activity types drop-down menu

select properties

Recutting pieces name Piece recut

Matching author Initial

Spread date

Recutting pieces version

Roll
comments

Create Modify Delete

lectra.com 1/6
Vector
Methods Technician - Recutting pieces additive

2. PRESENTATION OF PARAMETERS FOR RECUTTING PIECES

As for any type of activity, the 4 first tabs are specific to this activity type, here Recutting Pieces.
The Environment - Requirements - Executions tabs define the contents of the drop-down menus in
the Data input phase.

Process Input Positioning Cutting Environments Requirements

Piece group mode


Recutting Pieces specific settings
Multiple positionings

comments

Comment on cancel Possible

Comment on error Always

Comment on pause Never

Comment oblig. after:

Process Input Positioning Cutting Environments Requirements

Interactive filter
Automatic filling New feature in VectorPilot V3R1.
Preselection of requirements None

Preselection of executions Previous

lectra.com 2/6
Vector
Methods Technician - Recutting pieces additive

Process Input Positioning Cutting Environments Requirements

Tool checking

Misalignment compensation

Final control mode Global window Recutting Pieces specific settings


Validate all points

Contour points

Fabric direction Possible

Visible side Possible

Number of plies

Check of the number of plies


New feature in VectorPilot V3R1.
Spread height check

Process Input Positioning Cutting Environments Requirements

Worn tool error Blocking cutting

Rapid restart on a stop using arrow


New feature in VectorPilot V3R1.

lectra.com 3/6
Vector
Methods Technician - Recutting pieces additive

3. RECUTTING PIECES ACTIVITY SPECIFIC SETTINGS

The following parameters are specific to the Recutting Pieces activity.


The other parameters are used in the same way as for the Spread activity.

3.1 Piece group mode (Process tab)

Recutting in "piece by piece" mode


Piece group mode

Recutting in "piece group" mode


Piece group mode

lectra.com 4/6
Vector
Methods Technician - Recutting pieces additive

3.2 Multiple positionings (Process tab)

When Piece group mode

• Positioning a piece, cutting this piece


Multiple positionings
• Positioning the next piece, cutting this piece, etc.
• And so on until the entire list of pieces is cut

• Positioning each piece one by one


Multiple positionings
• Cutting all the pieces, in the order they are positioned

lectra.com 5/6
Vector
Methods Technician - Recutting pieces additive

3.3 Final control mode (Positioning tab)

- None

- Global window

- Piece contour

lectra.com 6/6

You might also like