Data Sheet Model ED 56

Model ED 56 | Drying and heating chambers with natural convection

The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 °C. Thanks to the natural convection, all thermal
processes which use this drying chamber are highly ecient. The ED series ensures fast, uniform drying.

BENEFITS

• Best energy eciency on the market

• Excellent temporal and spatial temperature accuracy
• USB connection for recording data
• Temperature range up to +300 °C

Model 56 Model 56

MAIN FEATURES
• Temperature range: +5 °C above ambient temperature to +300 °C • 2 chrome-plated racks
• Up to 30% lower energy consumption compared to conventional units on • Stackable
the market • Class 2 integrated independent adjustable temperature safety device
• High temperature accuracy thanks to APT.line™ technology (DIN 12880) with visual alarm
• Natural convection • Ergonomic handle design
• Controller with LCD display • USB port for recording data
• Electromechanical control of the exhaust air flap

ORDERING INFORMATION

Interior volume [L] Voltage Option model Version Art.-No.

230 V 1~ ph 50/60 Hz Standard ED056-230V 9010-0333
57
120 V 1~ ph 60 Hz Standard ED056UL-120V 9010-0334

BINDER Data Sheet | As of: 16.02.2022 Page 1 / 6

Technical specifications are subject to change.
Data Sheet Model ED 56

TECHNICAL DATA

Description ED056-230V1 ED056UL-120V1

Article Number 9010-0333 9010-0334
Performance Data Temperature
Temperature range +5 °C above ambient temperature to [°C] 300 300
Temperature variation at 150 °C [± K] 2.3 2.3
Temperature fluctuation at 150 °C [± K] 0.4 0.4
Heating-up time to 150 °C [min] 50 50
Recovery time aer 30 seconds door open at 150 °C [min] 19 19
Air change data
Air change (approx.) at 100 °C [x/h] 8 8
Electrical data
Rated Voltage [V] 230 120
Power frequency [Hz] 50/60 60
Nominal power [kW] 1.05 1.15
Unit fuse [A] 6.3 12.5
Phase (Nominal voltage) 1~ 1~
Measures
Interior volume [L] 57 57
Net weight of the unit (empty) [kg] 42 42
Permitted load [kg] 70 70
Load per rack [kg] 30 30
Wall clearance back [mm] 160 160
Wall clearance sidewise [mm] 100 100
Internal Dimensions
Width [mm] 360 360
Height [mm] 420 420
Depth [mm] 380 380
Doors
Unit doors 1 1
Housing dimensions not incl. ttings and connections
Width net [mm] 560 560
Height net [mm] 625 625
Depth net [mm] 565 565
Environment-specic data
Energy consumption at 150 °C [Wh/h] 180 180
Fixtures
Number of shelves (std./max.) 2/4 2/4

1 All technical data is specied for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage
fluctuation of ±10%. The temperature data is determined to BINDER factory standard following DIN 12880, observing the recommended wall clearances
of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the
right to change technical specications at any time.

DIMENSIONS incl. fittings and connections [mm]

BINDER Data Sheet | As of: 16.02.2022 Page 2 / 6

Technical specifications are subject to change.
Data Sheet Model ED 56

OPTIONS

Designation Description * Art.-No.

back
10 mm 01 8012-1282
30 mm 01 8012-0540
50 mm 01 8012-0546
le
10 mm 01 8012-1275
30 mm 01 8012-1018
50 mm 01 8012-1022
Access port with silicone
right
plug
10 mm 01 8012-1268
30 mm 01 8012-1017
50 mm 01 8012-1021
top
10 mm 01 8012-1262
30 mm 01 8012-0539
50 mm 01 8012-0545
100 mm 01 8012-1029
Alarm function for
Switchable acoustic alarm, with adjustable limit value on the independent temperature safety device – 8012-1635
overheating
Analog output 4-20 mA for temperature values (output not adjustable) 02 8012-1623
Calibration certificate,
for temperature; for extending the measurement in center of chamber to include another test temperature – 8012-1115
expanded
for temperature, measurement in center of chamber at specied temperature – 8012-1134

Calibration certificate, temperature measurement incl. certicate and 27 measuring points at specied temperature – 8012-1593
temperature temperature measurement incl. certicate, 15- 18 measuring points at specied temperature – 8012-1572
temperature measurement incl. certicate, 9 measuring points at specied temperature – 8012-1551
Class 3.1 independent
temperature safety with visual alarm (DIN 12880) – 8012-0985
device
Clock battery-backed – 8012-1640
Door gasket made of FKM, silicone-free – 8012-1008
Door lock lockable door handle – 8012-1664
Ethernet interface for Multi Management Soware APT-COM™ – 8012-1645
with 15 W light bulb
Interior lighting 120 V option model – 8012-1631
230/240 V option model – 8012-1627
Measurement of air
in accordance with ASTM D5374, denition and protocol according to ambient temperature – 8012-0195
exchange rate
Pt 100 temperature
additional flexible Pt 100, interior, for displaying the temperature on the unit display – 8012-1619
sensor
viewing window (triple insulating glass) in door, 240 x 240 mm, and 15 W interior
Viewing window and
120 V option model – 8012-1059
interior lighting
230 V option model – 8012-1058
* Notes › See last page

ACCESSORIES

Designation Description * Art.-No.

APT-COM™ 4 BASIC- for simple logging and documentation requirements with up to 5 networked units.
Edition version 4, BASIC edition – 9053-0039
* Notes › See last page

BINDER Data Sheet | As of: 16.02.2022 Page 3 / 6

Technical specifications are subject to change.
Data Sheet Model ED 56

Designation Description * Art.-No.

for working under GLP-compliant conditions. Measured values are documented in a tamper-proof way in line with the
APT-COM™ 4 GLP- requirements of FDA Regulation 21 CFR 11.
Edition
version 4, GLP edition – 9053-0042

APT-COM™ 4 convenient unit and user management built on the BASIC edition. Suitable for networking up to 100 units.
PROFESSIONAL-Edition version 4, PROFESSIONAL edition – 9053-0040
Ethernet interface for Multi Management Soware APT-COM™ – 8012-1645
pH-neutral detergent concentrated, for gentle remove of residual contaminants; 1 kg – 1002-0016
IQ/OQ documents – supporting documents for validation performed by customers, consisting of: IQ/OQ checklists incl.
calibration guide and comprehensive unit documentation; parameters: temperature, CO2, O2, pressure, depending on
unit
Digital in PDF format – 7057-0001
Hard copy inside folder – 7007-0001
Qualification documents
IQ/OQ/PQ documents – supporting documents for validation performed by customers, according to customer
requirements, PQ section added to qualication folder IQ/OQ; parameters: temperature, CO2, O2 – or pressure,
depending on unit
Digital in PDF format – 7057-0005
Hard copy inside folder – 7007-0005
chrome plated – 8012-2039
Rack
stainless steel – 6004-0158
Rubber pads set anti-slip feet – 8012-2030
Shelf, perforated Stainless steel – 6004-0190
Table on castors stable cart, casters with locking brakes, dimensions: W 1,000 x D 800 x H 780 mm – 9051-0018
* Notes › See last page

SERVICES

Designation Description * Art.-No.

Installation services
Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions
Unit commissioning check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, 05 DL10-0100
installation work)
Instruction regarding operating principle and basic functions of the unit, operation of the control
Unit instructions 05 DL10-0500
electronics including programming
Maintenance contracts
Maintenance services
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components,
BRONZE 3-year maintenance contract 05 DL20-0710
check of control response, 20% discount on spare parts
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components,
check of control response, 20% discount on spare parts, testing of all key functions, replacement of
GOLD 3-year maintenance contract 05 DL20-0910
wear parts, calibration of one test temperature specied by the user in the center of the usable space,
including certicate
One-o maintenance service in accordance with maintenance schedule. Visual inspection of mechanical
Maintenance and electrical components, testing of all key functions. Calibration of a test temperature specied by the 05 DL20-0200
user in center of usable space without certicate
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components,
SILVER 3-year maintenance contract check of control response, 20% discount on spare parts, testing of all key functions, calibration of one 05 DL20-0810
test temperature specied by the user in the center of the usable space, without certicate
Calibration services
03, 04,
Calibration of one (1) test temperature specied by the user in center of chamber, including certicate DL30-0101
05
Calibration certicate, temperature
Extension of calibration of one (1) additional test temperature specied by the user in the center of the 03, 04,
DL30-0102
usable space, including certicate 05

03, 04,
Measurement of air exchange rate including certicate (in accordance with ASTM D5374) DL33-0000
05

Temperature measurement, 18 Temperature measurement with 18 measuring points with a set value specied by the user, including 03, 04,
DL30-0118
measuring points certicate 05

Temperature measurement, 27 Temperature measurement with 27 measuring points with a set value specied by the user, including 03, 04,
DL30-0127
measuring points certicate 05

* Notes › See last page

BINDER Data Sheet | As of: 16.02.2022 Page 4 / 6

Technical specifications are subject to change.
Data Sheet Model ED 56

Designation Description * Art.-No.

Temperature measurement, 9 Temperature measurement with 9 measuring points with a set value specied by the user, including 03, 04,
DL30-0109
measuring points certicate 05

Validation services
Execution of IQ/OQ Execution of IQ/OQ in accordance with qualication folder 05 DL40-0100
Execution of IQ/OQ/PQ Execution of IQ/OQ/PQ in accordance with qualication folder 05 DL44-0500
Warranty service
1-year warranty extension The warranty is extended by 1 year from the delivery date, wear parts are excluded – DL50-0010
* Notes › See last page

BINDER Data Sheet | As of: 16.02.2022 Page 5 / 6

Technical specifications are subject to change.
Data Sheet Model ED 56

NOTES
01 Condensation may occur in the area around the access port. Access ports may be placed in custom locations for an additional charge.
02 UL mark is not granted when this option is used.
03 Sensor calibration is performed in an accredited calibration laboratory.
04 Calibration is performed according to the BINDER factory standard.
05 Quoted prices do not include travel costs. Please refer to the chapter on BINDER Service for travel costs for your region. Quoted prices for services performed in Switzerland do not
include a country-specic added fee (available on request).

BINDER GmbH BINDER Asia Pacific (Hong Kong) Ltd. Representative Office for CIS
Tuttlingen, Germany Kowloon, Hong Kong, P.R. China Moscow, Russia
TEL +49 7462 2005 0 TEL +852 39070500 TEL +7 495 988 15 16
FAX +49 7462 2005 100 FAX +852 39070507 FAX +7 495 988 15 17
[email protected] [email protected] [email protected]
www.binder-world.com www.binder-world.com www.binder-world.com

BINDER Environmental Testing BINDER Inc.

Equipment (Shanghai) Co., Ltd. Bohemia, NY, USA
Shanghai, P.R. China TEL +1 631 224 4340
TEL +86 21 685 808 25 FAX +1 631 224 4354
FAX +86 21 685 808 29 [email protected]
[email protected] www.binder-world.us
www.binder-world.com

BINDER Data Sheet | As of: 16.02.2022 Page 6 / 6

Technical specifications are subject to change.