CKP-SERIES

CKP-Series
SAE J1939 CAN KEYPAD
Compliant with SAE J1939 CAN standards, the CKP-Series is a customizable keypad featuring laser etched
legends and up to three dimmable LED function lights per button, which also offer diagnostic feedback by
blinking if there is a fault.

With above and below sealing protection, the CKP-Series can be installed inside or outside the cab making it
ideal for any on/off-highway application. Its low profile design affords a seamless dashboard look and can be
mounted either vertically or horizontally.

The CKP-Series offers significant advantages over traditional electromechanical switches such as 1,000,000
actuation cycles, reduced wire harnessing, and easy installation.

Product Highlights: Typical Applications:

• SAE J1939 CAN 2.0b Protocol • Military
• IP6k9k Above-Panel Sealing Protection • On/Off-Highway
• IP6k8 Below-Panel Sealing Protection • Trucks & Buses
• Up to 3 LED Function Lights Per Button • Construction
• Diagnostic Feedback • Mining
• Standard or Custom Laser Etched Legends • Agriculture
• 1,000,000+ Button Actuation Cycles • Among Others
• Low Current Switching
• 8 to 32V Operating Voltage
• Tactile and Audible Feedback

www.techna.co.uk
2 | CKP-Series - SAE J1939 CAN Keypad - Design Features

CKP-Series
DESIGN FEATURES
LOW PROFILE DESIGN
0.57 inch [14.48 mm] thickness (see dimensional specifications for more detail)

Front
View

SEALING PROTECTION LED FUNCTION LIGHTS CUSTOMIZABLE ICONS

Fully sealed IP6k9k above-panel One, two, or three LED Function Lights per button. Choose from our standard library
Colors include Amber, Green, Red or Blue. of icons or use custom icons.

Back
View

SEALING PROTECTION CONNECTOR 10-32 MOUNTING STUDS (2x)

Fully sealed IP6k8 below-panel Mates to the Deutsch Max tightening torque
when connected DT-Series Connector 30 inch lbs.

www.techna.co.uk
3 | CKP-Series - SAE J1939 CAN Keypad - General Specifications

General Environmental
Illumination LED backlit icons and function lights Thermal -40°C to +85°C
Up to 3 function lights per button The following codes were passed:
Dimmable illumination, controlled Cold Soak (IEC 60068-2-1)
by CAN messages Heat Soak (IEC 60068-2-2)
Connection / Wiring Duetsch DT series connector Cycling/Shock (IEC 60068-2-14)
(See Dimensional Specifications) Solar Radiation: IEC 60068-2-5, procedure B, 10
cycles, Total irradiation per cycle
Electrical = 22.4 kWh/m2
Operating Voltage Designed for 12/24 Volt systems Low pressure IEC 60068-2-13
Minimum 8 VDC Humidity Soak: IEC 60068-2-78, 93% RH
Maximum 32VDC (±3%), 10 days
Sleep Mode Low current sleep mode draws Cyclic IEC 60068-2-30, test Db: Damp
less than 1.5 mA throughout the Heat Cyclic (12hr + 12hr cycle),
supply voltage range wakes on variant 1, 6 cycles
keypress or CAN message Ingress Protection IP6k9k, for above-panel
Supply Voltage ratings The keypad passes SAE J1455 components of actual switch only.
section 4.13.1 for power up, IP6k8, for below-panel
operating voltage, over voltage, components of actual switch only
reverse polarity, and short circuit when connected.
EMC Transient immunity: ISO 11452-2, Shock and Bump IEC 60068-2-27, Shock 500 m/s²
100 V/m, 20 MHz to 2,000 MHz, 11 milliseconds, Bump 400 m/s² 6
Class A per ISO 11451-1 milliseconds 600 cycles
Conducted Transient immunity: Drop test IEC 60068-2-31, Free fall,
ISO 7637-2:2004, Annex A Table Procedure 1, 1000 mm height,
A2 (for 24V systems), Class A drop in all 3 axes in both
ESD immunity: ISO 10605:2001, directions
Test level IV (8 kV direct dis Vibration IEC 60068-2-6, Swept sine wave
charge, 15 kV air discharge) section 8.2, 5 - 500 Hz 20 cycles
Transient Emission: ISO 13766, 5g acceleration
Broadband: Annex D, Narrow IEC 60068-2-6, Vibration
band: Annex E, 30-1000 MHz sinusoidal, section 8.1, 10 - 2000
Hz, 5g acceleration
IEC 60068-2-64, Method 1,
Mechanical random excitation, 10 - 350 Hz, 5
Overall Dimensions See Dimensional Specifications hours in each axis
Panel cutout See Dimensional Specifications Chemical Resistance IEC 60068-2-74, Class B, Engine
Endurance Each button functions for at least oil, Diesel, Hydraulic oil,
1,000,000 total actuations Ethylene Glycol, Urea Nitrogen,
(100,000 actuations at -40°C, Liquid Lime, NPK Fertilizer,
100,000 actuations at +85°C, and Ammonia, Calcium Chloride,
800,000 actuations at +25°C Brake fluid
± 10°C) Corrosion Resistance IEC 60068-2-52, Test Kb, Severity
level 4
Weathering/Cracking ASTM D1171-99, method A,
Software Resistance 72 hours
CAN Protocol CAN 2.0b type interface as Abrasion/Wear 40 cycles of ASTM F2357 testing
defined by SAE J1939 Resistance: with 0.25” paper at 175 grams of
force

Software Interface Integration

Click below for details on integrating the CKP-Series
into J1939 CAN network:
www.carlingtech.com/sites/default/files/documents/ckp-series_interface.pdf

*Manufacturer reserves the right to change product specification without prior notice.
GPS-0007 Rev: A

www.techna.co.uk
4 | CKP-Series - SAE J1939 CAN Keypad - Keypad and Icon Artwork Ordering Scheme

Ordering Scheme: Part 1 (Keypad)

CKP 1 1 A 1 A B A J 000
1 2 3 4 5 6 7 8 9 10
Series Styling Button Orientation Keypad Backlight Function Un-illuminated Network Source
Layout Color Light Image Code Type Address
Color

1 SERIES 6 BACKLIGHT
CKP Carling Keypad A White

2 KEYPAD STYLING 7 FUNCTION LIGHT COLOR

1 Standard B Amber C Green D Red E Blue

3 BUTTON LAYOUT 8 NON-ILLUMINATED IMAGE CODE

1 Two by Six A White

4 ORIENTATION 9 NETWORK TYPE

A Landscape C Reverse Landscape J J1939
B Portrait D Reverse Portrait
See “icon artwork button layout” section for details.
10 SOURCE ADDRESS
The Source Address is a unique number (000-248) assigned to each
5 KEYPAD COLOR node on a CAN network, and is determined based on the specific
1 Black CAN architecture of each customer application.

Ordering Scheme: Part 2 (Icon Artwork)

Button 1 Button 2 Button 3 Button 4 Button 5 Button 6

2 RS 2 RA 3 UV 3 UW 6 MT 8 UB
11 Function 12 Icon Code 13 Function 14 Icon Code 15 Function 16 Icon Code 17 Function 18 Icon Code 19 Function 20 Icon Code 21 Function 22 Icon Code

Button 7 Button 8 Button 9 Button 10 Button 11 Button 12

8 NN 8 PU 5 PR 5 PP 4 RH 4 NU
23 Function 24 Icon Code 25 Function 26 Icon Code 27 Function 28 Icon Code 29 Function 30 Icon Code 31 Function 32 Icon Code 33 Function 34 Icon Code

FUNCTION LIGHT CODE (Select for positions 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33)
Reverse Reverse Reverse Reverse
Landscape Portrait Landscape Portrait Landscape Portrait Landscape Portrait

1 No Function Light 5 Closed-Open-Open

1 2
2 1 1 2 1 2
2 1 1 2
2 1
2 1

2 Open-Closed-Closed 6
Open-Closed-Open
1 2
2 1 1 2 1 2
2 1 1 2
2 1
2 1

3 Closed-Open-Closed 7
Open-Open-Closed
1 2
2 1 1 2 1 2
2 1 1 2
2 1
2 1

4 Closed Closed-Open 8
Open-Open-Open
1 2
2 1 1 2 1 2
2 1 1 2
2 1
2 1

Additional function light colors available, please consult factory.

ICON CODE
00 For standard icons, see next page. For additional icons, please consult factory.

COS-0094 Rev: D Continue to next page for layout and icons.

www.techna.co.uk
5 | CKP-Series - SAE J1939 CAN Keypad - Icon Artwork Orientation & Codes

Orientation - Icon Artwork Button Number Layout

(see dimensional specifications for more detail)
B: Portrait D: Reverse Portrait

A: Landscape
2 1 11 12

1 3 5 7 9 11
4 3 9 10
2 4 6 8 10 12

6 5 7 8

C: Reverse Landscape
8 7 5 6
12 10 8 6 4 2

10 9 3 4
11 9 7 5 3 1

12 11 1 2

Standard Icon Codes:

UB UV UW UX UY MP MR PX MS MR MT VU MW

NZ NX NY YM VW PW PZ WG RN RP YG TX SH

SN SR SY WY WZ UF UG MU TN NS PB SE VZ

YE NN RW PU WA YN UE NM RJ NR YD TL VR

SL UC VN PK VY UZ RH NU NV RB RC RK RL

MZ RG WS WT PM VV WB TB TC TD TE MY PV

TA TZ WC PT PN PH RA TU TT YL SK VS UL

UM WK TS VT WL VP YJ PJ RY UP NW NP RE

RF PP PR TV PC YT YU PL WJ MV RR TK RT
Standard Icon Codes continued on next page.

www.techna.co.uk
6 | CKP-Series - SAE J1939 CAN Keypad - Icon Artwork Codes, Dimensional Specifications

Standard Icon Codes:

SZ VX WF WH PG SJ YA YB RM TM RD RS TP

TR NT MX YC TW TJ YF TH TF TG YS YH SX

RZ YP WN WP WW WX SA SB SC SD ST SU WU

WV SV SW VK SF SG SS RU RV RX

Dimensional Specifications: in. [mm]

CLA-0145 Rev: A

www.techna.co.uk
7 | CKP-Series - SAE J1939 CAN Keypad - Dimensional Specifications

Dimensional Specifications: in. [mm]

www.techna.co.uk