Scribd
Upload
35 views10 pages

Arme y Desarme de Bomba Hidraulica 320C

This document provides step-by-step instructions for disassembling the pump control of a 320C excavator. It lists 22 steps to remove parts like the proportional reducing valve, cover, pistons, springs, and seals. Cleanliness is emphasized to prevent contaminants from entering the hydraulic system.

Uploaded by

Ingemak Urbano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views10 pages

Arme y Desarme de Bomba Hidraulica 320C

This document provides step-by-step instructions for disassembling the pump control of a 320C excavator. It lists 22 steps to remove parts like the proportional reducing valve, cover, pistons, springs, and seals. Cleanliness is emphasized to prevent contaminants from entering the hydraulic system.

Uploaded by

Ingemak Urbano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S...

Page 1 of 10

Cerrar SIS

Pantalla anterior

Producto: EXCAVATOR
Modelo: 320C EXCAVATOR PAB
Configuración: 320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine

Desarmado y Armado
320C Excavator Machine Systems
Número de medio -RENR3826-16 Fecha de publicación -01/11/2014 Fecha de actualización -30/03/2016

i01972318

Pump Control - Disassemble


SMCS - 5070-015-V4

Disassembly Procedure
Start By:

a. Remove the pump control. Refer to Disassembly and Assembly, "Pump Control - Remove" for
the machine that is being serviced.

NOTICE

Keep all parts clean from contaminants.

Contamination of the hydraulic system with foreign material will


reduce the service life of the hydraulic system components.

To prevent contaminants from entering the hydraulic system, always


plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.

Clean the hydraulic system properly after any major component


exchange or especially after a component failure, to remove any
contamination.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 2 of 10

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.

Note: Only the right pump control is equipped with the proportional reducing valve in Steps 1 and 2.
For the left pump control, start the disassembly procedure with Step 3.

Illustration 1 g00706151
Right Pump Only

1. Remove bolts (2). Remove proportional reducing valve (3) from pump control (1).

Illustration 2 g00882597
Right Pump Only

2. Remove O-ring seal (7), O-ring seal (6), O-ring seal (5), and O-ring seal (4) from the
proportional reducing valve.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 3 of 10

Illustration 3 g00706166

3. Remove nut (10) from the pump control.

Illustration 4 g00882598

4. Measure the length of screw (13) for installation purposes. Remove screw (13). Remove bolts
(11). Remove cover (12) from the pump control.

Illustration 5 g00706177

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 4 of 10

5. Remove stopper (14) from the pump control.

Illustration 6 g00706179

6. Remove O-ring seal (15) and backup ring (16) from the stopper.

7. Repeat Step 3 through Step 6 for the other side of the pump control.

Illustration 7 g00706239

8. Place the pump control in a soft jawed vise. Support pin assembly (17). Remove piston (18)
from the pump control. Remove pin assembly (17) from the pump control.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 5 of 10

Illustration 8 g00706243

9. Remove dowel pin (19) from the pin.

Illustration 9 g00706249

10. Remove bolts (20). Remove cover assembly (21) from the pump control.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 6 of 10

Illustration 10 g00882599

Personal injury can result from parts and/or covers under spring
pressure.

Spring force will be released when covers are removed.

Be prepared to hold spring loaded covers as the bolts are loosened.

11. Remove O-ring seal (28). Remove retainer (29). Remove O-ring seal (27) from the retainer.
Remove nut (23) and nut (25). Remove setscrew (22). Remove adjuster (24). Remove O-ring
seal (26) from the adjuster.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 7 of 10

Illustration 11 g00882601

12. Remove spring (30) and spring (31) from the pump control. Remove guide (32) from the pump
control. Remove ball (33) from the guide.

Illustration 12 g00706265

13. Remove pilot piston (34) from the pump control.

Illustration 13 g00706266

Personal injury can result from parts and/or covers under spring
pressure.

Spring force will be released when covers are removed.

Be prepared to hold spring loaded covers as the bolts are loosened.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 8 of 10

14. Remove two bolts (35). Remove cover (36) from the pump control.

Illustration 14 g00706267

15. Remove O-ring seal (37) from the cover.

Illustration 15 g00882608

16. Remove control piston (42), spring (41), spring (40), spool (39), and shims (38) from the pump
control.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine(S... Page 9 of 10

Illustration 16 g00706271

17. Remove pin (43) from the pump control.

Illustration 17 g00706272

18. Remove O-ring seal (44) from the pin.

Illustration 18 g00706273

19. Remove sleeve (45) and control linkage (46) from the pump control.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023
320C & 320C L Excavators PAB00001-UP (MACHINE) POWERED BY 3066 Engine... Page 10 of 10

Illustration 19 g00882609

20. Remove slide plate (47) and dowel (48) from the control linkage.

Illustration 20 g00706275

21. Remove plugs (49). Remove three plugs (50) from the pump control.

Illustration 21 g00706276

22. Remove O-ring seals (51) from the plugs.

Copyright 1993 - 2023 Caterpillar Inc. Wed Oct 25 23:27:29 EST 2023
Todos los derechos reservados.
Red privada para licenciados del SIS.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 25/10/2023

You might also like