Scribd
Upload
64 views1 page

Incoming Inspection Report: FM/QC/02 Rev - Status 01

The inspection report summarizes the inspection of a tappet shipment from a supplier. It lists the product description, date received, supplier name, reference numbers, and inspection parameters like outer diameter, thickness, height, and depth. For each parameter, it records the specification and inspection results for 5 samples, noting any issues such as blowholes or dent marks. The general remarks section is blank and the report is signed by the inspector and quality control manager.

Uploaded by

Sandeep Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
64 views1 page

Incoming Inspection Report: FM/QC/02 Rev - Status 01

The inspection report summarizes the inspection of a tappet shipment from a supplier. It lists the product description, date received, supplier name, reference numbers, and inspection parameters like outer diameter, thickness, height, and depth. For each parameter, it records the specification and inspection results for 5 samples, noting any issues such as blowholes or dent marks. The general remarks section is blank and the report is signed by the inspector and quality control manager.

Uploaded by

Sandeep Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INCOMING FM/QC/02

REV.STATUS 01
INSPECTION REPORT

Sr. No. ............ Challan/bill No............. Product Description ......TAPPET ...


Date of Receiving........................ Lot Qnty. ............................ No. Of Sample Inspected ........…...
Supplier Name...................................................................... Ref. SS/QC/ Drag. No. ............

Sr. O b s e r v a t i o n
No. Inspection Specification I M T Status
Parameter 1 2 3 4 5
O.DIA 30.50±0.3
1.
THICK. 17±0.25
2.
HIGHT 17.50±0.25
3.

DEPTH 11.80±0.25
4.
HIGHT
INCLUSION SHOULD
BE FREE
FROM
BLOW
HOLE,DEN
T MARKS

General Remarks. :-

Inspected by Incharge quality control

You might also like